|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Split Molding Knife, runs two pieces from ... moreone board. Most of the knives have only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$47.00 Shipping Condition: Used Location: Seattle, United States Hydro-Grip Type B MG 253 Moulder Tenoner Tooling holder. 1 13/16" bore x 65mm tooling bore x 135mm overall length. Stacked planing/slotting cutter measurements: ... more2.92" large straight cutter, .386" slotting cutter, .92" smaller straight cutter. Shows some wear but good overall condition.
Buy It Now
$21.53 Shipping Condition: Used Location: Seattle, United States Weing 503 122 02 3/6 4-knife cutter head.
Buy It Now
$50.16 Shipping Condition: New Location: LEICESTER, United Kingdom  Spares Desk Manned By Ex Wadkin Leicester Staff Original LEADERMAC OEM Parts Full VAT Invoice Supplied. Also Contact us for all your Wadkin Models . ... moreADVANCED MACHINERY SERVICES LTD SKEFFINGTON MILL UPPINGHAM ROAD SKEFFINGTON LEICESTER LE7 9YE.
Buy It Now
$20.00 Shipping Condition: Used Location: Layton, United States Weinig Industrial moulder / shaper head There are (3) available at $220 OBO each Brand: Weinig Size: (122x100x38.1mm / 4-13/16”x3-15/16”x1-1/2”)All are ... morein good used condition with plenty of life left to go.See my other listings to view I many more sizes that are available as well as knives for the heads.
Buy It Now
$6.23 Shipping Condition: Used Location: Seattle, United States
Buy It Now
$83.20 Shipping Condition: Used Location: Ashland, United States Listing is for ONE WOOD FEED DRIVE WHEEL GEAR REDUCEING BOX, WITH A 45 OR 46 TO 1 RATIO. THESE WERE REMOVED FROM A FULLY FUNCTIONING:/ 2008 V-HOLD 6-HEAD, ... more4-SIDED MOULDER, WE ARE PARTING OUT THE ENTIRE MACHINE, SO IF THERE IS ANY OTHER PARTS THAT YOU MAY BE LOOKING FOR PLEASE DONT HESITATE TO MESSAGE US. NOTE : THESE PARTS ALSO FIT SEVERAL OTHER MACHINES. PLEASE SEE PHOTOE'S FOR MICROMETER MEASURMENTS. (LOT 3)
Buy It Now
$15.53 Shipping Condition: Used Location: Lomita, United States The LRH Magic Molder Set Head MM2 is a cutting tool made in the USA. It comes with two carbide cutters (P-21 3/16") and is suitable for woodworking. The ... moreLRH brand is known for producing high-quality tools, and this product is no exception. Whether you're a professional woodworker or a DIY enthusiast, the LRH Magic Molder Set Head MM2 is a great addition to your toolkit.
Buy It Now
$10.40 Shipping Condition: Used Location: Ashland, United States Listing is for ONE WOOD FEED DRIVE WHEEL SHAFT. BEARING SIDE OF SHAFT TO SNAP RING 4-3/8" OVERALL SHAFT LENGTH. 6-3/4" THESE WERE REMOVED FROM A FULLY ... moreFUNCTIONING:/ 2008 V-HOLD 5-HEAD, 4-SIDED MOULDER, WE ARE PARTING OUT THE ENTIRE MACHINE, SO IF THERE IS ANY OTHER PARTS THAT YOU MAY BE LOOKING FOR PLEASE DONT HESITATE TO MESSAGE US. NOTE : THESE PARTS ALSO FIT SEVERAL OTHER MACHINES. PLEASE SEE PHOTOE'S FOR MICROMETER MEASUREMENTS FOR BEARING SIDE OF SHAFT.
Buy It Now
$22.51 Shipping Condition: Used Location: Seattle, United States 8" D x 3 13/16" cut x 1 13/16" bore.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding knives for moulding custom picture molding Works with Corrugated heads. Most of the knives ... morehave only been sharpened lightly once so they are practically new.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$16.38 Shipping Condition: Used Location: Waterford, United States USED, PLANER /MOLDER HEAD. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES.
Buy It Now
Condition: New Location: Duluth, United States With TERSA Straight-knife Cutterhead We are an authorized dealer of MiniMax and are always happy to provide assistance in picking the best machine for ... moreyou. Unique in the world in its category, with a cutting height of 118 mm.
Buy It Now
$5.45 Shipping Condition: Used Location: Seattle, United States
Buy It Now
$25.00 Shipping Condition: Used Location: Layton, United States Moulder/Shaper cutting heads for industrial size machines. I have 8 available at the moment.In very good used condition Size: 150mmx100mmx2-1/8”Brand: ... moreWeinigKnives are also available on my page in lots if you are in need of them.
$8.70 Shipping Condition: Used Location: Waukesha, United States Counter resets with thumbscrew turned clockwise.
Buy It Now
$9.57 Shipping Condition: Used Location: Seattle, United States (4) Dominion Inlaid HSS Shaper Moulder Knives 4" wide x 2 11/16" tall x 5/16" thick with 35 degree bevel. Appear to be balanced sets. The knives stamped ... more"1" do not appear to have been run. The knives stamped "2" have been run but only show light use.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States Spring/ Summer Sale Pricing In Effect! Price: $ 1.650.00 Sale Price: $1.525.00 W1812 Shop Fox 2 HP 7” Planer/ Moulder with Stand Brand new in factory ... morepackaging with manufacturer's warranty! This item ships via truck freight. Buyer is responsible for unloading. See below for details. The next generation Planer/Moulder from Shop Fox® features precision-ground cast-iron wings for greater work support. T-slots for easy guide rail adjustment, pedestal-mounted switch, improved chip clearance, one-piece enclosed stand, and variable speed control for unsurpassed planing and moulding capability. Open end design allows you to make elliptical mouldings with the optional elliptical jig. If you make your own mouldings and frames, you need this machine! SPECIFICATIONS: Motor: 2 HP. 240V, single-phase, 12 Amps Precision-ground cast-iron table and wings Maximum cutting width: 7" Maximum planing height: 7-1/2" Maximum planing depth: 1/8" Maximum moulding depth: 3/4" Feed rate: Variable Cutterhead type: Square Knife size: 7-1/8" x 1-1/2" x 1/4" HSS Cutterhead speed: 7000 RPM 4" dust port Rubberized steel feed rollers Powder-coated paint One-piece base cabinet Approximate shipping weight: 324 lb FEATURES: Heavy-duty cast-iron handwheel Precision-ground cast-iron infeed and outfeed extension wings Dovetailed way for cutterhead housing with precision gib adjustments Pedestal-mounted magnetic switch with variable speed control Manual Specifications Sales tax will be charged for all orders shipped to Missouri, Pennsylvania. And Washington State. You are welcome to pick up your purchase from one of our showrooms if stock is available in that facility. Please contact us if you wish to make pick up arrangements. Sales tax will apply for purchases picked up in our showrooms. How Are Shipping& Handling Charges Calculated? We charge a flat-rate freight fee for new items shipped via truck freight within the lower 48 states. The freight charge is shown in the Item Specifics. After you comple
Buy It Now
$25.16 Shipping Condition: New other (see details) Location: LEICESTER, United Kingdom CentroLock HSS T1 18%Planer Blade to suit Weinig Cutter Blocks - Pair Of Blades. Designed for use on Weinig 4 Side Planers & Moulders. 240mm long x 16mm ... morehigh x 3mm thick.
Buy It Now
$24.75 Shipping Condition: Used Location: Cedar Rapids, United States Lot of 29 sets of molding knives. 5/16" thick, corrugated backs. High quality, high speed tool steel. Most recently sharpened, some plastic dipped, some ... morewith sharpening templates. Nice assortment with some crowns and bases. Two-knife sets. From now-closed major furniture manufacturer. Pick up NE Cedar Rapids or will ship.
Buy It Now
Condition: New Location: Duluth, United States With TERSA Straight-knife Cutterhead We are an authorized dealer of MiniMax and are always happy to provide assistance in picking the best machine for ... moreyou. The new saw unit closed loop structure is made of a heavy cast iron and is supported firmly under the table by two lateral supports in a crescent shape.
Buy It Now
Condition: Used Location: Poland Four side moulder Weinig Hydromat 23C. the last two heads equipped with a manual jointer. spindles with bearings on both sides.
Buy It Now
$69.83 Shipping Condition: Used Location: Ashland, United States Listing is for ONE WOOD FEED DRIVE WHEEL GEAR REDUCEING BOX, WITH A 45 OR 46 TO 1 RATIO. THESE WERE REMOVED FROM A FULLY FUNCTIONING:/ 2008 V-HOLD 6-HEAD, ... more4-SIDED MOULDER, WE ARE PARTING OUT THE ENTIRE MACHINE, SO IF THERE IS ANY OTHER PARTS THAT YOU MAY BE LOOKING FOR PLEASE DONT HESITATE TO MESSAGE US. NOTE : THESE PARTS ALSO FIT SEVERAL OTHER MACHINES. PLEASE SEE PHOTOE'S FOR MICROMETER MEASURMENTS. (LOT 4)
Buy It Now
$40.78 Shipping Condition: Used Location: Millersburg, United States 25-Slot Rack was used for Arburg Circuit Boards. Part Number 511. Pallet Racking. Lift Tables. In Good Used Condition. Removed from a Working Machine. ... morex Width 12 in. x Height 12 in.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
$5.50 Shipping Condition: Seller refurbished Location: Conehatta, United States Most of the knives have only been sharpened lightly once so they are practically new. Shaper / Molder Custom 5/16 Corrugated High Speed Steel Moulding ... moreknives for. Be on the lookout for the followingProfile knives, Base Molding, Crown Molding, Base Cap, Casing, Chair Rail, Hand Rail, Bar Rail, Bevels, Radius, Rabbetts, Backouts, Siding, Wall Cladding and more.
Buy It Now
Condition: Used Location: Fleetwood, United States • Local pick up. We think good. When we receive the product we will confirm item is. Let us know what’s going on. are more than happy to rectify any problems ... moreby replacing. received in a different condition than stated (DOA, not. ).
Buy It Now
$51.10 Shipping Condition: New Location: LEICESTER, United Kingdom STARK Adjustable Groover 160mm x 30mm Bore SPINDLE MOULDER TOOLING STARK Adjustable Groover 8-15.5 mm with replaceable tungsten carbide tips. This tool ... moreset can be used as an adjustable groover. Each set consists of two interlocking tools fitted with grooving cutters and scribes for a clean side face. The spacing of the discs can be varied using the shims provided making the tool adjustable. The tools can also be reversed to produce tenons with up to the minimum size of the groove. D=160 mm B=8.0 - 15.5 mm Z= 4 V= 4 N=4800=7200 rpm Feed = MAN d = 30mm NOTE: Our Special Price is shown VAT included - Our Ebay Listing Price shown includes VAT at 20% A Vat Invoice will be issued with all purchases allowing you to claim this back if you are a registered business user or exportin.
Buy It Now
Free Shipping Condition: Used Location: Portville, United States Groove Saw/ Moulder Head. 3 1/2” Arbor. Bead board. Condition is Used. Sold as is.
Buy It Now
$4.55 Shipping Condition: Used Location: Seattle, United States Weinig 1 13/16" x 8 mm spindle spacer #2004Z0027.
Buy It Now
Free Shipping Condition: New Location: Hammond, United States Extrema 2 pocket corrugated molder cutterhead. 1-13/16" Bore. Steel construction.
Buy It Now
$25.00 Shipping Condition: Used Location: Layton, United States Brand: weinigSize: 150mm x 60mm x 2-1/8 bore Moulder cutterheads / shaper cutterheads I have knife sets available in my other listings for the heads as ... morewell if interested.There are 11 of these heads available for sale, contact me for a bulk discount if that’s something you are interested in.
Buy It Now
Free Shipping Condition: Used Location: Granger, United States North American Hydro-Lock moulder cutter head1-13/16 Bore, 6" Diameter, 2-3/8” Length20 CA, 16-90 Corr
Buy It Now
Free Shipping Condition: Used Location: Raymond, United States 4” lockedge steel shaper/moulder blanks. Make your own knives. Both pieces have a profile lightly scratched on the back and 1 piece has a small cut into ... morethat should not be a problem for 95% of the profiles you would grind onto these.Both pieces are 5” long. 4” lockedge steel is over $400 a stick. These account for almost half of a 25” stick.
Buy It Now
$15.55 Shipping Condition: Used Location: Raymond, United States 5 1/4” Bar Rail, Base Moulding Knives-Weinig/Schmidt/M-3-HS Corrugated Knives For Moulder. Condition is "Used". Shipped with USPS Priority Mail.
Buy It Now
$17.45 Shipping Condition: Used Location: Morgan, United States
Buy It Now
$50.73 Shipping Condition: New Location: LEICESTER, United Kingdom Pivot Bracket For Top Chipbreaker For WADKIN Moulder Genuine WADKIN BURSGREEN parts Wadkin Part Numbrer GA170 For WADKIN GA, GB, GC. GD, etc These are ... morethe manufactured from the highest quality British materials, complete with fittings Price is for ONE Casting only, other photos for illustration purposes. Why not visit our Fully Operational Centre Of Excellence, with over 30 machines ready to run. To Arrange a demo contact Steve McGloin .
Buy It Now
$14.95 Shipping Condition: New – Open box Location: Kent, United States 7200RPM max. Hydro Lock. 60 Degree corrugations. Light surface blemish from sitting on shelf. Still with factory wooden spacers.
Buy It Now
$24.75 Shipping Condition: Used Location: Evart, United States
Buy It Now
$50.46 Shipping Condition: New Location: LEICESTER, United Kingdom LEADERMAC MOULDER FLAT DRIVE BELT 1700 X 55 LMC 0086B GENUINE QUALITY SPARES FROM Advanced Machinery Services Ltd Any Belt Size Available - Quick Delivery ... morePARTS SHIPPED WORLDWIDE Spares Desk Manned By Ex Wadkin Leicester Staff Original QUALITY OEM Parts Full VAT Invoice Supplied. Also Contact us for all your Moulder Models . ADVANCED MACHINERY SERVICES LTD SKEFFINGTON MILL UPPINGHAM ROAD SKEFFINGTON LEICESTER LE7 9YE.
Buy It Now
Free Shipping Condition: Used Location: Granger, United States Wisconsin Knife Works Hydro-Lock moulder cutter head1-13/16 Bore, 6" Diameter, 2-1/4” Length20 CA, 16-90 Corr
Buy It Now
$4.55 Shipping Condition: Used Location: Seattle, United States Weinig 1 13/16" x 10mm spindle spacer #2004Z0019.
Buy It Now
$40.00 Shipping Condition: Used Location: Layton, United States 20 knife sets with 20 Templates for moulder/shaper from a pallet bought at auction.You will receive the items shown in the photos.Knives, woodworking, ... moreindustrial woodwork, molder, shop equipment
Buy It Now
Free Shipping Condition: New Location: Hammond, United States Extrema 2 pocket corrugated molder cutterhead. 1-1/4" Bore. Steel construction.
Buy It Now
Free Shipping Condition: Used Location: Granger, United States
Buy It Now
Free Shipping Condition: Used Location: Bennet, United States
Buy It Now
$17.52 Shipping Condition: Used Location: Seattle, United States # 2-360-OT3. Great used condition. Similar to cutter #110.
Buy It Now
Free Shipping Condition: Used Location: Portville, United States Gladu V Groove Saw/ Moulder Head. 2 5/8 Arbor. Bead board. 7” wide. Condition is Used. Sold as is. Free shipping in the USA.
Buy It Now
$4.55 Shipping Condition: Used Location: Seattle, United States Weinig 1 13/16" x 5 mm spindle spacer #2004Z0028.
Buy It Now
$5.45 Shipping Condition: Used Location: Seattle, United States Corrugated-back HSS Base Cap moulding moulder or shaper knives 1/4" x 1 1/2" x 3 3/8".
Buy It Now
$35.48 Shipping Condition: Used Location: Seattle, United States Demp's Cornice Crown Moulder Cutter. There is a minor nick in the tip of one cutter. Cutter #225.
Buy It Now
$6.00 Shipping Condition: Used Location: Kissimmee, United States This Shopsmith Mark V molder cutter package includes the following: 505608 1/4" 1/2" Combination Quarter-Round Shaper Cutter 505932 Ogee Shaper ... moreCutter 505607 Bead& Quarter-Round Shaper Cutter
Buy It Now
$24.75 Shipping Condition: Used Location: Cedar Rapids, United States Lot of 38 sets of molding knives. 5/16" thick, corrugated backs. High quality, high speed tool steel. Most recently sharpened, some plastic dipped, some ... morewith sharpening templates. Two-knife sets. From now-closed major furniture manufacturer. Pick up NE Cedar Rapids or will ship.
Buy It Now
$20.95 Shipping Condition: Used Location: Raymond, United States High speed moulder / shaper steel. 1” wide. 5/16” thick. 20 1/2” long. Used mostly for shaper profiles. Over $250 for a full 25” stick new.
Buy It Now
$23.95 Shipping Condition: New – Open box Location: Wilmette, United States
|
|
|
|
Lot 768 Base Or Case Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for decorative traditional base or casement moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture ... moreis of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13ebedb5d58-0x106-
|
|
|
Lot 786 Casement Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for heavy casement moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13ec05da3e4-0xff-
|
|
|
Lot 780 Case Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom case moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 779 Base Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom base moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13ec05da4f1-0x104-
|
|
|
Lot 777 Block Panel Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for block paneling moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
VINTAGE 1930s S.A. WOOD MACHINE CO. WOODWORKING #137 MOULDER CATALOG & BROCHURES
7 DAY AUCTION! VINTAGE 1930s W OO DS ELECTRIC MOULDER CATALOG S.A. WOOD S MACHINE CO. BOSTON. MA) CATALOG/BR OCHURE FOR MODEL#137M ELECTRIC MOULDER SHOWS VARIOUS PHOTOS OF THE MACHINE FROM DIFFERENT AN GLES HAS LETTERS ON CO. LETTERHEAD ADVERTIZING THE MOULDER& ADVERTS ALSO HAS TE STIMONIALS FROM DIFFERENT CO MPANIES THAT BOUGHT AND USED THE MOULDER SUCH AS WILLIAMS LUMB ER CO(GA) HURD LUMBER CO. WI) GOSHEN SASH& DOOR(IND) SOUTH MONTROSE MFG CO(PA) SAUNDERS HOWELL& CO(EUROPE) A ND A FE W MORE IN BACK OF FOLDER I S A CATALOG ON CUTTER HEADS PROX 44 PGS YOU ARE BIDDING ON ORIGINAL LITERATURE UNLESS OTHERWISE STATED S&H IS $6.50 USPS PRIORITY MAIL. EACH ITEM IS SAFELY PACKED WITH CARDBOARD INSERT ALL INVOICES MUST BE PAID WITHIN 3 BUSINESS DAYS IF YOU HAVE ANY QUESTIONS REGARDING PAYMENT PLEASE EMAIL ME PLEASE DO NOT ASK TO BUY ... moreA PHOTOCOPY DURING OR AFTER AUCTION. COPIES ARE NOT AVAILABLE I DO SEND 2ND CHANCE OFFERS ON OCCASION IF I HAVE DUPLICATES. EMAIL ME TO VERIFY I SENT IT IF YOU'RE NOT SURE IT CAME FROM ME. IF YOU DON'T WANT TO RECEIVE 2ND CHANCE OFFERS YOU MIGHT WANT TO USE THE EBAY FEATURE THAT WILL ALLOW YOU TO'OPT-OUT' OF RECEIVING 2ND CHANCES FROM SELLERS. BUYER CAN COMBINE SHIPPING ON MULTIPLE PURCHASES. IF YOU BUY 1 COST IS $6.50. IF YOU BUY MULTIPLE ITEMS COST WILL STILL BE ONLY $6.50 TOTAL. SHIPPING COSTS ONLY INCREASE ON MULTIPLE PURCHASES IF YOUR ORDER CAN'T FIT IN A PRIORITY MAILER AND HAS TO BE PACKED OTHERWISE. SHIPPING& HANDLING CHARGES ARE NOT NEGOTIABLE. EVERYBODY PAYS THE SAME.
|
|
|
Mattison 276 Moulder
Mattison 276 Moulder. This machine is in good working condition. But was disconnected last week to make room for our new Weinig Moulder. All the heads pictured above come with the machine. We will load the machine and the heads free of charge as long as buyer arranges and pays for shipping costs. This machine is coming from Southeast Michigan's largest moulding manufacturer, General Hardwood Company(generalhardwood.com) For questions regarding the moulder itself contact Steve the mill foreman at 313-365-5676. For price and logistical questions contact Mark at the main office 313-365-7733. More pictures are available upon request to Kenneth.Ellerbrock@gmail.com.
|
|
|
Moline Model 100 Sheeter / Dough Roller & Gefra De Ridder Moulder
Moline Model 100 Sheeter/ Dough Roller& Gefra De Ridder Moulder. This is a lot of consisting of two bakery machines. One moline model 100 sheeter/ dough roller& one gefra de ridder rotating moulder. Units were acquired as pictured from lien sale. They have not been tested and we are unsure if they are complete, they are in used condition and will need maintenance before they are operational again. Listed as parts due to unknown condition and functionality. We will hold your item for pickup for 2 weeks. This is plenty of time to arrange your shipment. Unless other arrangements are made. We will charge storage fees beyond this 14 day window of $10 per day. Items will not be able to be removed until storage fees are paid. Local pick up only. However, I can strap to a skid a shrink wrap, for free. You send your truck to pick up at my ... morecommercial address, in las Vegas,NV 89122. I have no dock, but do have a forklift to load.Freightquote.com is a good place to get a estimate for you to have this picked up. You are also welcome to come preview them item. Just send us a message. To get your freight shipping estimate, you will need to know the following. The item will be placed on a standard pallet 40X48, or larger if necessary. It will be shipped from a commercial facility. We will load the truck with our forklift. WE COMBINE SHIPPING IF POSSIBLE. LOCAL PICK UP IS ALWAYS WELCOMED PAYMENTS ARE DUE WITHIN 3 DAYS(72)HOURS. PLEASE MAKE PAYMENTS WITHIN THIS TIME. OR CONTACT US IF THERE IS A PROBLEM. WE DO OUR BEST TO LIST ITEMS AS WE SEE THEM. TEST THEM OR HEAR THEM.WE ARE LIQUIDATORS, AND DO NOT HAVE EXTENSIVE KNOWLEDGE OF EVERYTHING WE SELL. INFORMATION IS GIVEN AS TO WHAT WE KNOW OR SEE. TO HELP IN YOUR DETERMINATION OF PURCHASE. PLEASE REVIEW DESCRIPTION AND PHOTOS AS TO CONDITION OF ITEMS AND/OR WHAT IS INCLUDED WITH ITEM. RETURNS ARE ACCEPTED FOR MISREPRESENTED ITEMS ONLY. PLEASE CHECK OUR OTHER AUCTIONS. AS THERE ARE MANY LISTED. IF BIDDING/BUYING FROM ALASKA OR HAWAII. PLEASE CONTACT US PRIOR TO PURCHASING FOR
|
|
|
Oliver Bread Moulder Model # 600 Used Good Condition
We Aim For Your 100% Satisfaction Oliver Bread Moulder Model# 600 Used Good Condition Works Perfect Click Images To Enlarge if you do not see them Please scroll down the page Model# 600 Volt 220 Serial# 2R6593 Phase 3 Width 48" Amps 3.1 Depth 34" Hp 3/4 Height 42 1/4" Hz 60 Capacity 2 oz to 6Lb Loaves Shipping Weight 525 Lb Key Features: The 600 Moulder is designed for perfect shaping of rolls and various sizes of breads from 2 oz. 1kg) to 6 lbs. 3kg) Output from 1.200 to 4,500 loaves per hour, depending on weight Accurate adjustment of sheeting via hand-operated levers with locking device Preliminary stretching between an endless rotating belt and a weighted belt Stretching between two endless belts rotating in opposite directions Three roller in-feed Click Here For Manufactures Fact Sheet Payment Policy Paypal Visa. MasterCard, ... moreAmex or Cash No COD payments. And No Paypal payments for PICK UP Payment is due at the time the order is placed on eBay unless otherwise agreed to with BakeDeco. If payment is not received within 7 days. A Non Paying Bidder will be filed with eBay. Shipping Policy We make every effort to ship your item the day payment is cleared. However larger items and equipment that needs to be palletized may take up to 3 business days to ship. Some items are Drop Shipped directly from the manufacturer and may delay shipping. If you prefer to arrange shipping please advise and we will prepare the item for pickup by your carrier. If crating is needed it must be paid prior to pickup by your carrier. Equipment is shipped from our warehouse at 6018-15 Ave. Brooklyn. NY 11219. Customer Pickups: If you need your item palletized please give a 2 day notice prior to pickup. Domestic Freight Shipping: eBay rules require freight quotes to be added to the purchase once you click“buy it now” However. The buyer needs to contact us for final price regarding equipment freight cost. Please call us at 718-232-7044 and as for our eBay Equipment Dept. Items shipped via UPS or Freight Carrier requires a phy
|
|
|
Moline Bread Moulder Model # S-76 Used Good Condition
We Aim For Your 100% Satisfaction Moline Bread Moulder Model# S-76 Used Good Condition Works Perfect Click Images To Enlarge if you do not see them Please scroll down the page Model# S-76 Volt 115 Serial# Phase 1 Width 21 3/32" Hp 1/2 Depth 39 3/32" Hz 60 Height 35 3/4" Total Shipping Weight Approx 400 Lb Item Description This Moulder has been tested and works perfect The Model S-76 is a small.Compact Bread Molder Especially designed for the retail bakery to provide fast output and uniform product quality. It remoulds frozen bread dough giving greater oven spring better unifomity by eliminating the wet core the mouldr is east to operate requiring very little skilled help This Moulder has been tested and works perfect Click Here For Manufacturer's Cut Sheet Payment Policy Paypal Visa. MasterCard, Amex or Cash No COD payments. ... moreAnd No Paypal payments for PICK UP Payment is due at the time the order is placed on eBay unless otherwise agreed to with BakeDeco. If payment is not received within 7 days. A Non Paying Bidder will be filed with eBay. Shipping Policy We make every effort to ship your item the day payment is cleared. However larger items and equipment that needs to be palletized may take up to 3 business days to ship. Some items are Drop Shipped directly from the manufacturer and may delay shipping. If you prefer to arrange shipping please advise and we will prepare the item for pickup by your carrier. If crating is needed it must be paid prior to pickup by your carrier. Equipment is shipped from our warehouse at 6018-15 Ave. Brooklyn. NY 11219. Customer Pickups: If you need your item palletized please give a 2 day notice prior to pickup. Domestic Freight Shipping: eBay rules require freight quotes to be added to the purchase once you click“buy it now” However. The buyer needs to contact us for final price regarding equipment freight cost. Please call us at 718-232-7044 and as for our eBay Equipment Dept. Items shipped via UPS or Freight Carrier requires a physical address. PO Boxes are not
|
|
|
FRENCH BREAD BAGUETTE DOUGH MOLDER MOULDER
BAXTER BREAD BAGUETTE MOULDER Model# 96FMB This bread moulder will mould your dough pieces forquality baguettes. Long sandwiches, bread rolls, and various types of Frenchloaves from 4oz up to 16oz. Well Maintained– Belts are in Good Condition! STANDARD FEATURES: Stainless steel construction Stand with locking casters Delicate. Accurate and progressive moulding action Virtually maintenance free Hopper safety system Process a wide variety of dough types Synthetic belt for easy cleaning Retractable outfeed table Heavy duty 3/4 HP motor 0” clearance on sides and back Electrical System: 220V– 3PH– 3A– 60Hz. Shipping Weight: Approx. 800lbs. NOTE: Item is specified as USED. I tried to representthe item as accurately as possible to the best of our ability and prep them asbest as possible prior to shipment. As with all previously owned equipment.There ... moremay be some dents, scratches, rust, loose paint, and/or dirty that mayneed a good clean up. All sales are final. We do our best to test our equipmentto make sure it’s in working order, but due to the nature of used equipment, beaware that everything is sold as-is with no warranty. We will NOT be responsible for Freight Damagesafter Merchandise leaves our location. You are welcome to inspect at time ofpickup/delivery. SHIPPING: All shipping and packaging charges willbe the buyer’s responsibility. Please note that most freight companies chargemore to go to a residence. The shipping companies also require the items to besecured on the pallet. There will be a $ 50 charge for palletizing/ bandingfee. Or buyer has to arrange crating himself. Buyer is to arrange freightshipment. Shipping cost from Ebay is just an estimate, and actual cost isusually lower. Item Condition: See pictures for more details. Shipping: Local Pickup FREE. Buyer arranges freight shipping himself. Palletizing/banding fee is $50. Palletizing Fee waived with"Buy It Now" Option Only. Payment: Pay on Pickup. Paypal payment received up to $1000 only. Wire Transfer/ Certified Payment if the balance is mo
|
|
|
Dough Divider Rounder Moulder Esnach EG2
Esmach- Cinelli Divider. Rounder, Moulder- Uses the preferred knife blade cut divider and has two moulders, one is a pressure plat style and the other felt belt soft touch moulding baguette unit. Following products and more- Ciabatta. Bolillo. Baguette French Bread, Cubin, Etc. Machine Cost New $59.000
|
|
|
Lot 826 Back Band Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom crown base moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife ... morelistings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 825 Half Round Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for bullnose and half round moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future ... moreknife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13ee2a5c405-0x107-
|
|
|
GUILLIET KBS 5-head 9inch wide bed Moulder Wood Planer thicknesser like Wadkin
GUILLIET KBS 5-head 9inch wide bed Moulder s/n 21 8661.T.681. 2 x recent cutting heads, Year of Manufacture: 1984. Currently only 4 cutting heads fitted) PLEASE NOTE THIS MACHINE HAS A 3 phase 440 VOLT SUPPLY This has been bought as a job lot I Don't know much about it. It is working and I have seen it working. It is in very good condition. Delivery can be arranged possibly. Final Prices will be Plus VAT@ 20% Please call for any further info. 07813 216057
|
|
|
Lot 818 Band Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for various chair rails or banding moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of ... morefuture knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ee39e97e7-0x105-
|
|
|
Lot 812 Luxury Case Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for beautiful casement moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife ... morelistings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13ee39e97df-0x103-
|
|
|
Lot 811 Pilaster Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for beautiful pilaster or casement moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of ... morefuture knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 842 Pilaster Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for pilaster moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 841 Lip Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for panel/ lip moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 840 Classical Prof Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for classical ogee moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 804 Panel Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for panel moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I ... morewill be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 839 Sym. Rail Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for nice symmetrical band or chair rail moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture ... moreis of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13ee39e97f6-0x105-
|
|
|
Lot 804 Cove & Bead Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for various cove and bead edge and panel moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture ... moreis of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 837 Unique Casing Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for graceful casement moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife ... morelistings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 803 Crown Base Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom crown moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 835 Various Use Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for various moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 833 Casing Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for casement moulding 5/16" thick. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. ... moreI will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lucks French Bread Moulder Molder Model FAP
Used Lucks bread moulder in good working order. Model FAP. Electric 208/60/3. Dimensions 29" wide. 27" deep and 57" tall on casters. Serial number 7970; manufacture date 4/2/2000. Buyer to pay $50 pallet fee, in addition to freight charges. Shipping weight 500 pounds. Will be shipped from Milwaukee, WI or buyer may pick up. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13eea210e6c-0x107-
|
|
|
Williams and Hussey / Shop Fox Moulder 6" Crown Profile Cutter Blade Set HSS
William and Hussey/ Shop Fox Molder 6" Crown Profile Cutter Knives Made of HSS 6" wide steel blade.
|
|
|
Williams and Hussey / Shop Fox Moulder 7" Straight Planer Blade Set HSS
William and Hussey/ Shop Fox Molder 7" Straight Planer Cutter Knives Made of HSS 7" wide steel blade.
|
|
|
US CONCEPTS CTS-130 TILTING VERTICAL ARCH SHAPER MOULDER /WATCH HD VIDEO DEMO
HELPING YOU BUY WITH CONFIDENCE 100% POSITIVE FEEDBACK SINCE 1999_ lt US CONCEPTS CTS-130 TILTING VERTICAL ARCH SHAPER MOULDER Fully operational CTS-130 tilting vertical arch shaper/moulder. 1 1/4″ X 6 3/8″ spindle. 6″ width capacity. 10 HP(230/460V) Main Motor. 3/4 HP drive motor. Variable speed feed with floating feed system with(5) feed rollers. Multiple speeds on spindle. Spindle lock and hand wheels for easily adjusted height and tilt of spindle. Terms& Conditions: 1. Please ask all questions before bidding. 2. Winning bidder will pay actual freight charges. We do not make money off of freight. Insurance, packaging, or crating. We will be glad to get you a freight quote. We also offer third party insurance to insure that freight is covered if damaged in transit at a cost of $40 per $10.000 of coverage 3. Please call(630-229-6705) ... moreor email( info@360degreemachinery.com) us for full freight options. There will be $100 custom skidding/crating fee if shipping common carrier. 4. Illinois transactions must add 7.25% sales tax unless tax exempt. 5. Please email your zip code and if it's shipping to a business with a dock or forklift OR if it's shipping to a residence and we will be glad to quote you on our low cost freight options. We charge exactly what we pay with zero mark up. We also have third party insurance available at a rate of $40 per $10.000 to protect against freight loss/damage
|
|
|
Woodmaster 718 planer moulder sander with custom knife holder / accessories
Woodmaster 718. Other than some minor surface rust this machine is in great shape. It was in my fathers shop for years. But I can only think of around 4 or 5 projects that he used it for. It includes the blades in the cutter plus an extra set of new blades. Colonial moulding knife, and numerous joinery knives and an ogee, leveling indicator and accessories, sanding drum, a couple rolls of sand paper, dust collector hookup, 5HP motor(240V) Infinitly variable Independent DC feed drive motor. Just search youtube to find out everything you'd ever want to know. The table sled is an older wood version. It is slightly warped, although when bolted down, you can't tell. Also there are some water stains on the ends of wood. So, aside from some cosmetic imperfections, this machine is in great shape. I will offer freight shipping. But be advised, ... moreI am a residential address, so it will be a little more costly, since so many carriers will not pickup from residential addresses. Of course local pickup is also offered(preferred actually: Feel free to ask any questions. More pictures below:
|
|
|
SCMI 5 Head Moulder, Model: Compact 23
Normal 0 false false false MicrosoftInternetExplorer4 1996 SCMI Compact 23 Five Head Moulder. In good running order with spare heads and tooling. See photos for specs and call or email for more information. Thanks for looking! Edensaw Woods.
|
|
|
Pinheiro PMA4-480 34" Planer/Moulder
480 volt Three-Phase 4 heads with 34" x 10" capacity. 1999 Machine with 30HP top head. 24HP bottom head, and 12HP side heads.
|
|
|
BLOEMHOF Bakery Bread Moulder with (5) Press Boards - Model Express 400
BLOEMHOF Bakery Bread Moulder with(5) Press Boards- Model Express 400 Bloemhof Bread Moulder Model Express 400 SN Ex400H102 Requires 220v- 3ph electric/4.6 amps; 1.25 hp Measures 120" long x 35" wide x approx 48" tall overall 29" Belt Comes with(5) Press Boards: 1) 56" x 14" 1) 56" x 6" 1) 56" x 10" 1) 66" x 24" 1) 56" x 14" 6" ramp on all boards) Inv# 5447 Unit is in very good used condition. Thoroughly cleaned& tested. It will arrive ready to use on arrival and carries a 60 day parts warranty. Please see video below for details: Note: All freight charges will be paid by the buyer Local pick-up is welcomed if you prefer E-mail us for a shipping quote. Please include your zip code. Specify if delivery is to a business or residence and let us know if you have a ... moredock or forklift available or if you will need a lift gate to unload for you at delivery. PACKING. SHIPPING& SALES TAX* All items are sold FOB our dock in Union. MO 63084. We can arrange shipping of your order. Items are usually shipped within 1-3 days after payment has cleared. Please include a telephone number with payment. As our freight carriers require a telephone number for delivery. Standard packing for large or heavy items usually consists of securing the item. With metal strapping, to a pallet and then shrink-wrapping the unit. Large or heavy items are shipped via freight carrier and insurance is upon request. We do not accept responsibility for damage after the item leaves our warehouse. Filing of damage claims with the freight carrier is the sole responsibility of the customer. Please inspect your items upon receipt. Any damages must be documented with the freight carrier before they depart your location. Missouri sales tax(6.475% is charged for all shipments within the state of Missouri. LOCAL CUSTOMER PICKUPS* Items are available for pickup at our warehouse Monday thru Friday. From 8:00 a.m. to 4:00 p.m. except for holidays. Our staff will be happy to assist you
|
|
|
Esmach Moulder/Sheeter
You are viewing a used Esmach Moulder/Sheeter Model FE4C. This machine is in very good condition and was recently tested and works fine. This sheeter also comes with an additional sheeter/roller plate. Electrical 208-230 Volt 3 Phase Dimensions 107" W x 47" D X 60" H Approx Shipping Weight 1350 lbs. Shipping Please use the freight calculator provided above. Enter zip code. Whether you're at a residential or business location, and if a liftgate is needed to unload your item. To inquire about shipping cost to your location contact TONY at FREIGHTQUOTE 1-800-323-5441 EXT. 1383 or tsidoti@freightquote.com. If you’d like to make your own shipping arrangements please have your shipping company e-mail the Bill of Lading to: We will print a copy for the driver. Our warehouse is equipped with forklift and loading dock. If you ship ... moreitems yourself or would just like to get the best shipping prices for what you order ask Tony to set up a free account for you! Please allow 10 business days after payment has cleared for shipment. Guarantee Everything is sold as-is(unless noted. No warranties expressed or implied. Most of our items are cleaned and tested by our technician. By placing bids. Making offers, or purchasing from this online store it is understood that you have read all of the above and agree to the terms. Item may be picked up at our warehouse during our regular shipping/receiving hours with adequate notice to prepare your item for loading. We reserve the right to end our auctions early at our sole discretion
|
|
|
COMTEC 1100 PIE PRESS, CRUST MOULDER FOR TARTS, CHEESE CAKES, QUICHE DOUGH PRESS
We're having 30 DAY SALE to make room for new inventory. EVERYTHING IS MARKED DOWN ADDITIONAL 10%50% THE SALE ENDS 6/26/13. After which we will return to our regular low prices. YOU ARE BIDDING ON A PIE PRESS MODEL: 1100 by COMTEC. UNIT SPECIFICATION Operating Speed: 350 to 500 crusts per hour Dimensions: Overall length: 24" Width: 18-3/8" height: 34" Electrical requirements: 240 volt. 50/60 cycle, 1 phase. NSF approved CONDITION This ba rely used machine was checked and tested by qualified technician and guaranteed to work as it should. Looks and works like new- ver y quiet. The press is clean and ready for operation. WAR RANTY This unit comes w ith 14 days m oney back guarantee* and 30 major parts war rant y* BONUS We will include five gallons of new hydraulic oil($165 value) w/ purchase of the press. The unit comes w/ ... moreone(1) free set of dies($500 value) The winning bidder will choose one out of th ree sets of dies. Sizes and shapes of dies are displayed in the pictures. If you decide. You may choose the set that is already installed on the unit- see pictures. Additional dies are available for purchase. PAYMENT We accept: Visa and MasterCard over the phone. PayPal, Direct Money Transfers, Business and Personal Checks, Money Orders and Cashier's Checks. Cash, when pick up is in person. Payment is due within three business days. When deciding on a type of payment to use, please consider clearing time for different types of payments. Clearing time depends on payment method and as follows: Credit Cards(Visa. MasterCard) over the phone- same day. Business checks. Cashier's checks and money orders 1-2 days. Personal checks- up to 7 days. PayPal(we are PayPal verified) up to 45 days(48 hours for most buyers) SHIPPING Shipping. Handling and custom crating- $286 To ship an item we require: 1. Physical address of the business where unit is being shipped 2. Full name and phone number of the contact person accepting delivery. Every unit is custom crated to assure maximum protection. we have perfe
|
|
|
BLOEMHOF SIMPLEX 4-24BL2 DUAL BOLILLO SHEETER MOULDER
BLOEMHOF SIMPLEX 4-24BL2 DUAL BOLILLO SHEETER MOULDER Vestco Food Equipment Bloemhof Simplex 4-24BL2 Dual Bolillo Sheeter Moulder Excellent condition! For moulding bolillos. Tapered rolls, artisan breads, white and whole wheat breads, subs, and hogie rolls For sheeting puff pastry. Danish dough, yeast raised dough Two teloscopic infeed tubes Two pressure plates Make up to 7.200 bolillos per hour Easy to disassemble and clean Totally enclosed chain and sprocket drive New 24" wide belt 4" Diameter x 23" Long rollers and scrapers Overall dimensions 72"L x 32"W x 54"H 800 lbs shipping weight FOR MORE INFORMATION CALL US AT 760-747-1970 Trust your equipment needs to people with integrity. Resources and know-how. Vestco Food Equipment not only offers a wide array of program options and competitive pricing, but is fully ... morecommitted to providing you with the personalized care and professional expertise that you deserve. We will ensure that your equipment needs are not only properly identified, but capably met. Owner Gary Vest knows how to help his clients weigh their options. Not one to rush in. He begins with the first step-building confidence and trust. Vest knows the value of time and is available to meet customers at their place of business. Vest's approach is based on sincere attention to customer needs together with his business philosophy of quality. Integrity and professionalism. Feel free to contact us for any of your restaurant and bakery equipment needs. You may reach one of our sales representatives by phone. E-mail, or by simply filling out the customer service form below. Our staff at Vestco Food Equipment will be more than happy to assist you. Operation Hours: Monday through Friday 8 A.M. to 3:30 P.M. PST Address: Vestco Food Equipment. Inc. 1220 INDUSTRIAL AVENUE ESCONDIDO, CA 92029 Telephone& Fax: Tel: 888) 324-9849(Toll Free) Tel: 760) 747-1970 Fax: 760) 747-1939
|
|
|
Rebate cutter head for spindle moulder with box of scribe cutters
Rebate cutter head for spindle moulder with box of scribe cutters Steel rebate cutter head for a spindle moulder 125mm dia x 50mm depth x 1 1/4" bore comes with a box of new tearout scribes Shipping to any UK destination is £8.75 I will combine shipping where possible Worldwide shipping avaiable please ask for costs Payment is required within 2 days of sale end Payment methods accepted are Paypal Cheque(to clear in advance of shipping) Postal Order Any questions: please use the'ask the seller a question' facility on Ebay and I'll get back to you as quick as possible Best of luck bidding… gsrx_vers_486(GS 6.5.1(486)
|
|
|
2004 Weinig Unimat 1000 - 5 Head Moulder -
Weinig Unimat 1000- 5 head moulder Contact Justin 1-800-519-7147 ext. 101 f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f16735492-0x108-
|
|
|
W Power Spindle Moulder with powered feed unit Like Router Wadkin Flooring Door
W MASTER SF-450/1200 Spindle Moulder with powered feed unit. S/n 354/01, C/w Unused Replacement Motor in Box. PLEASE NOTE THIS MACHINE HAS A 3 PHASE 440 VOLT SUPPLY This has been bought as a job lot I Don't know much about it. It is working and I have seen it working. It is in very good condition. Delivery can be arranged possibly. Final Prices will be Plus VAT@ 20% Please call for any further info. 07813 216057
|
|
|
Old style Whitehill soindle moulder cutter head
Old style Whitehill soindle moulder cutter head A vintage Whitehill spindle moulder cutter head 5" diameter x 1" depth in good condition although not up to current health and safety standards so use is entirely at buyers risk Shipping to any UK mainland destination is £6.00 Payment is required within 2 days of sale end Payment methods accepted are Paypal Cheque(to clear in advance of shipping) Postal Order Any questions: please use the'ask the seller a question' facility on Ebay and I'll get back to you as quick as possible Best of luck bidding… gsrx_vers_486(GS 6.5.1(486)
|
|
|
Esmach Moulder/Sheeter Dough Bakery Pizzeria
Esmach Molder Sheeter For bakery dough In Overall Good Condition Shipping will vary depending on your location! Be sure to check out my other auctions and if you have a specific need for a piece of restaurant equipment or industrial Food Equipment shoot me an email. I probably have 3 of them! PLEASE EMAIL WITH ANY QUESTIONS. PLEASE LOOK AT THE PICS FOR CONDITION!Check out my other items!
|
|
|
Dual Hook Moulder Head - 12 & 20 degree - 40mm bore - Cutter Head
Dual Hook Moulder Head- 12& 20 degree- 40mm bore- Cutter Head Corrugations for the knife stock do not fit our knife stock. This cutter head was made for a Chinese knife stock. It can be machined to fit Weinig corrugations.
|
|
|
Lot 894 Beaded Face Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for beaded face frame moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If ... moreyou buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile Posted with eBay Mobile Posted with eBay Mobile Posted with 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-13f2a15e865-0xfa-
|
|
|
Lot 882 Brick Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom brick moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy ... moreseveral lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile Posted with eBay Mobile Posted with eBay Mobile Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f2a15e877-0xfe-
|
|
|
Lot 885 Pilaster Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for nice symmetrical pilaster moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13f2a15e870-0x106-
|
|
|
Lot 877 Hand Rail Cap Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for versatile bullnose or handrail cap moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated ... morein listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 874 Fluted Casing Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom fluted casing moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile Posted with eBay Mobile Posted with eBay Mobile Posted with ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13f2a15eab0-0xf1-
|
|
|
Lot 870 Reeded Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom reeded moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you ... morebuy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile Posted with eBay Mobile Posted with eBay Mobile Posted with
|
|
|
Lot 849 Hand Rail Set Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom hand rail/safety rail moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch. My knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile Posted with
|
|
|
Lot 899 Mantle 2pc Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for awesome mantle casing or chair rail moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated ... morein listing. If you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile Posted with
|
|
|
Lot 916 Panel Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for custom chair rail or panel moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile Posted with eBay Mobile Posted with
|
|
|
Lot 901 Casing Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for nice casing moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. If you buy ... moreseveral lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with eBay Mobile Posted with eBay Mobile Posted with eBay Mobile Posted with eBay Mobile Posted with
|
|
|
Weinig Profimat 26S Moulder, year 2000-woodworking
CMs 4573 Moulder Manufacturer: Weinig Model: Profimat 26S YMFG: 2000 Condition: As Taken From Service Location: Southeast USA Price: $24.500 15 HP Bottom, Shared 10 HP Right& Left, 15 HP Top, 15 HP Bottom, Contact Chris Deal 704-288-1904 x 108 link to machine:
|
|
|
Lot 905 Case Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for delicate custom casement moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 903 Elegant Case Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for elegant custom casement moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
|
Lot 902 Reeded Case Moulding /Weinig / Lietz Corrugated Knives Shaper Moulder
Moulder knives for nice custom reeded casement moulding 5/16" thick. I do my best to estimate the purpose of the knives. But i can't know for sure that i have described them and their purpose accurately. Grinding template included if pictured. New Other" condition means that i see little to no signs of use. Used condition may need some touch up for best results. Save tons of money on my used knives. Replacement cost is near $50 per inch, my knives generally sell for around $3-$6 per inch at the end of the auction. All my knives can combine shipping if the price exceeds $20 U.S. addresses only. International shipments sent in small flat rate box up to 4 lbs for combined shipping. On combined shipping of larger orders($75 and up) i will charge $2 per 100 to help cover insurance costs. Otherwise shipping will be as stated in listing. ... moreIf you buy several lots, wait to pay until I send an invoice showing the final cost. I usually send the invoice within hours, but by the end of the next day for sure. Bulk picture is of future knife listings. I will be posting 30-50 per week so keep looking for the next 6 months! Posted with
|
|
 |