|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Sheffield Lake, United States I have other woodworking machines for sale, so check my other listings. Oliver 2521 bandsaw. It's a 20" direct drive model. The Motor is 860RPM. The tires ... moreare in good shape. It is 3 phase. I can demonstrate it working when you pick it up. Local pickup only - Located in Sheffield OH 44054. I have a forklift to load.
Buy It Now
Free Shipping Condition: New Location: Walton, United States For Kreg KMS7215 Fine-Tuning Micro Adjuster Precision Band Saw Router Fence Fitment: The KMS7215 Micro Adjuster is compatible with Kreg precision band ... moresaws and router table fences. KMS7215 Micro Adjuster is suitable for home improvement premium tools and can be precisely adjusted to the band saw fence-accurate to 0.005"(0.127mm) Features: Easy to Adjust: Use this Micro-Adjuster you can easy to adjust with the simple turn of a thumb wheel. Also provided more controlled adjustments makes small fence adjustments much easier. Precise Adjustments:.
Buy It Now
Free Shipping Condition: New Location: Walton, United States Fitment: The KMS7215 Micro Adjuster is compatible with Kreg precision band saws and router table fences. KMS7215 Micro Adjuster is suitable for home improvement ... morepremium tools and can be precisely adjusted to the band saw fence-accurate to 0.005"(0.127mm) Features: 1) KMS7215 Micro Adjuster is made of high quality material to help woodworkers close the gap between ideas and results more precisely. A premium tool for home improvement, an indispensable tool for fences using band saws and circular saws .
Buy It Now
Free Shipping Condition: New Location: Walton, United States Fitment: The KMS7215 Micro Adjuster is compatible with Kreg precision band saws and router table fences. KMS7215 Micro Adjuster is suitable for home improvement ... morepremium tools and can be precisely adjusted to the band saw fence-accurate to 0.005"(0.127mm) Features: 1) KMS7215 Micro Adjuster is made of high quality material to help woodworkers close the gap between ideas and results more precisely. A premium tool for home improvement, an indispensable tool for fences using band saws and circular saws .
Buy It Now
Free Shipping Condition: New Location: Walton, United States Features: 1. Compatibility: The KMS7215 Micro Adjuster is compatible with Kreg precision band saws and router table fences. KMS7215 Micro Adjuster is ... moresuitable for home improvement premium tools and can be precisely adjusted to the band saw fence-accurate to 0.005"(0.127mm). 2. Material: KMS7215 Micro Adjuster is made of high quality material to help woodworkers close the gap between ideas and results more precisely. A premium tool for home improvement, an indispensable tool for fences using band saws and circular saws. .
Buy It Now
Free Shipping Condition: New Location: China Compatibility: The KMS7215 Micro Adjuster is compatible with Kreg precision band saws and router table fences. KMS7215 Micro Adjuster is suitable for ... morehome improvement premium tools and can be precisely adjusted to the band saw fence-accurate to 0.005"(0.127mm). Material: KMS7215 Micro Adjuster is made of high quality material to help woodworkers close the gap between ideas and results more precisely. A premium tool for home improvement, an indispensable tool for fences using band saws and circular saws. Function: .
Buy It Now
$14.53 Shipping Condition: New Location: Dekalb, United States CL Wood shelf SE. Need to call us?.
Buy It Now
Free Shipping Condition: New Location: Vista, United States Model: 19800. You can also add your own miter or sliding fixture to a work bench, table saw, drill press table or band saw table. Accepts standard 3/4" ... morex 3/8" miter gauges, with or without T-roller. TOOL TABLES, STANDS & CONVEYOR.
Buy It Now
Free Shipping Condition: New Location: United States RUBBER TIRE: The band saw tire is made of excellent rubber, which is not easy to break and crack, greatly improving its service life. Feature: 1. Item ... moreType: Band Saw Tire. If you do not receive our reply within 48 hours, pls.
Buy It Now
Condition: Used Location: Bonita Springs, United States Felder 24" Bandsaw. Model #FB-640. Tiltable table up to 20%. Bonita Springs, FL 34134.
Buy It Now
Free Shipping Condition: New Location: Vista, United States Model: 19802. You can also add your own miter or sliding fixture to a work bench, table saw, drill press table or band saw table. Accepts standard 3/4" ... morex 3/8" miter gauges, with or without T-roller. TOOL TABLES, STANDS & CONVEYOR.
Buy It Now
Free Shipping Condition: New Location: Boise, United States Bandsaw Blades. 1 Pair Planer Blades. Electric hand planer blades. Electric Hand Planer Blades. Serrated Cutter Blanks. Saw Blade Bushes. These reducing ... morerings are intended for use with TCT Saw Blades to reduce the centre bore.
Buy It Now
Condition: Used Location: Orange, United States SURPLUS & MACHINERY SALES . REF #TJ-02236 /TNT/20/j.
Buy It Now
$6.49 Shipping Condition: New Location: Grand Forks, United States LENOX 1 Gallon Band-Ade Band Saw Fluid MPN:68004 SKU:68004 This band-aid band saw fluid is a general purpose fluid coolant designed for light to moderate-duty ... moremachining applications involving both ferrous and non-ferrous metals. It reduces machine wear and improves band saw blade tool life. Should be mixed at a ratio of 10 parts water to 1 part concentrate.
Buy It Now
$358.00 Shipping Condition: New Location: China Grinding wheel specification: 150 32 2-10mm grinding wheel. Motor power: grinding wheel motor 250W, feed motor 20W. Gear grinding speed: 50 teeth/min. ... moreSaw blade pitch range: 2-25mm. Saw blade width:15-50mm.
Buy It Now
Condition: Used Location: Sarasota, United States Belt/Disc 6" Sander, Delta Drill Press, High-Rise 14" Bandsaw, Double Compressor, 6" Jointer, and Oscillating Spindle Sander.
Buy It Now
Condition: Used Location: Oxnard, United States Very Clean Machine.
Buy It Now
Condition: New Location: Duluth, United States Theminimax s 45n is an SCM Group made 2.5hp motor bandsaw. Fort Myers, FL 33905. Reardon's Dust Collection & Machinery. We are an authorized dealer of ... moreMiniMax and are always happy to provide assistance in picking the best machine for you.
Buy It Now
Free Shipping Condition: New Location: China Feature: 1. Item Type: Band Saw Tire. If you do not receive our reply within 48 hours, pls. If you are satisfied with our service, pls. Material: Rubber.
Buy It Now
$25.00 Shipping Condition: Used Location: Apple Valley, United States Its original design and functionality make it a must-have for both seasoned and amateur woodworkers. Don't miss out on the opportunity to own a piece ... moreof woodworking history with this 1932 Walker Turner scroll saw.
Buy It Now
Free Shipping Condition: New Location: China An Ideal machine for teeth setting of bandsaw blade,compact Vertical design needs less space,minimum Settings - Easy to Operate,Speedy and smooth sawing ... moreof wood due to accurate setting of bandsaw blade teeth and also avoids blade cracking.
Buy It Now
Free Shipping Condition: New Location: Brentwood, United States You can also add your own miter or sliding fixture to a work bench, table saw, drill press table or band saw table. ✅ Accepts standard 3/4" x 3/8" miter ... moregauges, with or without T-roller. Screws included.
Buy It Now
Free Shipping Condition: New Location: Sioux Falls, United States Easily attach up to three different machines or tools to one convenient and portable dust collector fitting with the DCT 3 Way Junction Fitting. The pipe ... moreis constructed from durable ABS plastic for maximum strength and longevity that resists rust and corrosion.
Buy It Now
Free Shipping Condition: New Location: Eugene, United States You can also add your own miter or sliding fixture to a work bench, table saw, drill press table or band saw table. ✅ Accepts standard 3/4" x 3/8" miter ... moregauges, with or without T-roller. ✅ Extruded aluminum for extra durability.
Buy It Now
Free Shipping Condition: New Location: China An Ideal machine for teeth setting of bandsaw blade,compact Vertical design needs less space,minimum Settings - Easy to Operate,Speedy and smooth sawing ... moreof wood due to accurate setting of bandsaw blade teeth and also avoids blade cracking.
Buy It Now
$51.15 Shipping Condition: Used Location: Dekalb, United States This is a cast iron motor cover for the Tannewitz 36" band saws. Very good used condition.
Buy It Now
$18.53 Shipping Condition: Used Location: Dekalb, United States Pallets that need to be enlarged will require a larger pallet fee. This is a Delta 14" band saw light and guard. The larger and taller a machine is the ... moremore likely they will require more than your average pallet.
Buy It Now
$6.49 Shipping Condition: New Location: Vienna, United States WoodRiver 1-1/2" Hose End Cuff Fitting for Power Tool Hose Kit, 164237, Flexible 1-1/2" I.D. and 1-3/4" O.D. connects to many jigs and sanders, Fits dust ... moreport on many miter saws and benchtop bandsaws, Reverse threads directly replace end of Power Tool Vacuum Hose Assembly, Power Tool Vacuum Hose Assembly sold separately, This WoodRiver flexible 1-1/2″ I.D. x 1-3/4″ O.D. hose end cuff fitting has reverse threads to directly replace either hose end on the Power Tool Vacuum Hose. Fits dust port on many miter saws and benchtop bandsaws.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1HP Dust Collector, 550 CFM Wheeled Jet Dust Collection, Potable 14.8-Gallon Bag Dust Collector, 30 Micron Bag Filtration Dust Collector, Dust Collector ... moreCentral Machinery System. Motor Power: 750W, 1HP.
Buy It Now
$24.00 Shipping Condition: New – Open box Location: Boones Mill, United States 1/4, 1/2, 3/4 ". (2 teeth 3 teeth, 20 gage, 21, 23, and more. ).
Buy It Now
$397.99 Shipping Condition: New Location: China The guide rail of the machine tool is equipped with precision linear bearings to ensure light operation, High grinding precision. 250W Fully automatic ... moreband saw blade grinder precision woodworking saw blade gear grinder electric band saw blade grinder.
Buy It Now
$358.00 Shipping Condition: New Location: China Grinding wheel specification: 150 32 2-10mm grinding wheel. Motor power: grinding wheel motor 250W, feed motor 20W. Gear grinding speed: 50 teeth/min. ... moreSaw blade pitch range: 2-25mm. Saw blade width:15-50mm.
Buy It Now
Condition: New Location: Duluth, United States This Italian designed and manufactured machine is considered THE bandsaw to use for the most discriminating professionals and hobbyists alike. Powerful ... moresingle-phase motors (4.8hp), heavy-duty large cast-iron balanced wheels, robust cast iron and steel components, best in class resaw capacity and unparalleled safety features make this the bandsaw of choice for thousands!
Buy It Now
Free Shipping Condition: New Location: China Feature: 1. RUBBER TIRE: The band saw tire is made of excellent rubber, which is not easy to break and crack, greatly improving its service life. Item ... moreType: Band Saw Tire. If you do not receive our reply within 48 hours, pls.
Buy It Now
Free Shipping Condition: New Location: Vista, United States Model: 19801. You can also add your own miter or sliding fixture to a work bench, table saw, drill press table or band saw table. TOOL TABLES, STANDS ... more& CONVEYOR. PLUMBING PARTS. Extruded aluminum for extra durability.
Buy It Now
Free Shipping Condition: New Location: Alameda, United States GuidePRO also functions as a dual side and top hold feather when cutting small pieces. GuidePRO adds simplicity and convenience to cutting long boards ... moreas it holds material firm as it’s fed into the blade while you support and feed the board.
Buy It Now
Condition: New Location: Blaine, United States We are an authorized dealer of Cantek and are always happy to provide assistance in picking the best machine for you. Fort Myers, FL 33905. Reardon's ... moreDust Collection & Machinery. Blade Width 1/4″ ~ 1-1/4″.
Buy It Now
Free Shipping Condition: New Location: Denver, United States Or to be able to move a large machine tool quickly and easily. It’s ideal for bandsaws, table saws, sanders, drill presses, jointers, planers, and much ... moremore. You can move your machines to wherever you like, and once there, rigidly lock them into place with a quick press of the industrial strength foot lever.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1HP Dust Collector, 550 CFM Wheeled Jet Dust Collection, Potable 14.8-Gallon Bag Dust Collector, 30 Micron Bag Filtration Dust Collector, Dust Collector ... moreCentral Machinery System. High Absorption: The dust collector adopts 1HP strong copper, which supports continuous work.
Buy It Now
Free Shipping Condition: New Location: Rathdrum, United States It is truly a unique blade featuring many new advances in blade design. Made from the toughest alloys, the teeth are precision ground and razor sharp, ... morenot punched or milled like traditional blades. The teeth also feature a new aggressive tooth design and set yet, the sides of the blade are polished smooth, and the back of the blade is smoothed to allow it to feed and turn with less heat and chatter.
Buy It Now
Free Shipping Condition: New Location: New York, United States DCT 3-Way Dust Collection Junction 4in Hose Coupler Union Y Fitting – Woodworking Table Saw, Jointer, Planer, Sander. Easily attach up to three different ... moremachines or tools to one convenient and portable dust collector fitting with the DCT 3 Way Junction Fitting.
Buy It Now
Condition: New Location: Duluth, United States With TERSA Straight-knife Cutterhead With long jointer tables, and sturdy fence, this machine is a quality product, made in Italy, for a value price. ... moreFind out why this machine may be perfect for you.
Buy It Now
Condition: New Location: Duluth, United States TheS 540P is the big brother of the S440p. For those looking for single-phase power, but with a larger throat and even more resaw capacity, this is the ... moremachine for you. With all of the features of its smaller brother, this bandsaw will resaw up to 20” of material.
Buy It Now
Condition: New Location: Duluth, United States Very thick, cast iron wheels, as well as the worktable, running on sealed for life ball bearings. Safety first. We are an authorized dealer of MiniMax ... moreand are always happy to provide assistance in picking the best machine for you.
Buy It Now
Free Shipping Condition: New Location: China Feature: 1. RUBBER TIRE: The band saw tire is made of excellent rubber, which is not easy to break and crack, greatly improving its service life. Item ... moreType: Band Saw Tire. If you do not receive our reply within 48 hours, pls.
Buy It Now
Condition: New Location: Fort Myers, United States Discover the "Xylent " cutterhead, available for this machine. “Xylent” spiralknife cutter block with 3 series of knives. With XYLENT Spiral Helical Cutterhead ... moreWith long jointer tables, and sturdy fence, this machine is a quality product, made in Italy, for a value price.
Buy It Now
Condition: New Location: Duluth, United States I have a very nice SCM Minimax S45 Woodcutting Band Saw up for sale. 17inch throat. This is a professional grade saw on par with Laguna. And Powermatic, ... moreETC Made in Italy. 220 Single phase 1.8 hp motor. Tilting cast iron table, magnetic starter, bearing guides, nema 6-50amp plug, one blade and manual. Needs new tire on the top wheel. Looks like there was a brazed repair on trunion. Ask questions before making an offer I will bolt machine to a pallet and drop it off at the nearest freight terminal for $50. Buyer pays shipping. Shipping Size 48x40x78" Weight 400lbs
Buy It Now
Free Shipping Condition: New Location: United States Fast and Easy Set Up: Miter Cam pivots in the miter slot to set in position. Simply position this item with the feather in front of the blade, apply desired ... morepressure as you push the workpiece as you move the wood forward to within a 1/4” of the blade, and press down the locking lever.
Buy It Now
$13.09 Shipping Condition: Used Location: Canada This sale is for ONE previously owned COPY of: Atlas Press Company. ATLAS WOODWORKING POWER TOOLS CATALOG No. W.55. Kalamazoo 1954) 31 pages bound in ... morea soft cover with an old dealer's stamp. This catalog provides images and descriptions on the features of circular saws, arbor saws, saw-jointer combinations, jointers, band saws, jig saws, sanders, grinders, wood shapers, wood lathes, drill presses and accessories. This item is in excellent-like-new overall condition and would make a nice gift for the collector of Atlas products. This PUBLICATION is being offered at any exceptional price. A rule may appear in the photographs for scale reference only and is not part of this sale. Thank you for looking. We are happy to combine multiple orders. We ship Wednesday to Friday. We now accept PAYPAL for sales with north America. All items shipped to the US are sent by UPS( we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping costs listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability. Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arising from the use or possession of any purchased equipment, device or component, 3. any property damage caused directly or indirectly by the use, operation or possession of any equipment, device or component.If any legal action ensues,the buyer agrees to pay all legal costs of the seller regardless of the outcome. Machine Safety: it is the user's r
Buy It Now
Condition: New Location: Blaine, United States Also available HB500R 20" Bandsaw 3-HP (3 PH). We are an authorized dealer of Cantek and are always happy to provide assistance in picking the best machine ... morefor you. Production 20″ bandsaw.
Buy It Now
Condition: New Location: Blaine, United States We are an authorized dealer of Cantek and are always happy to provide assistance in picking the best machine for you. 2 in 1 machine for rip and curve ... moreband sawing. Gross Weight 2046 lbs. Cast iron work table is precision ground and can tilt to 45 degrees.
Buy It Now
$700.00 Shipping Condition: Used Location: Hayward, United States With a powerful 5 HP motor, it can easily handle the toughest cutting jobs. It currently has a wood cutting blade that slices through 4x4 very easy. The ... moremotor is 695 rpm and is directly mounted to the bottom wheel.
Buy It Now
Condition: Used Location: Stone Mountain, United States (3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. Marvel 81 Semi Automatic Bandsaw. ... moreCNC Vertical Machining Centers. Cause of Action?).
Buy It Now
$6.00 Shipping Condition: New Location: Winter Garden, United States Introducing the Bosch BS5912-6W 59.5" X 1/4" X 6 TPI General Purpose Blade -F9, crafted in the United States and available for purchase on eBay. This ... moretop-quality blade is designed for woodworking with a supplies type of Band Saw Blade. It is ideal for those in the Business & Industrial, CNC, Metalworking & Manufacturing, and Other Woodworking Supplies categories. The Bosch BS5912-6W blade has a unit quantity of one and is suitable for a wide range of uses. Its brand value is unparalleled due to Bosch’s reputation of manufacturing the finest quality products. Don't miss this opportunity to purchase this product on eBay and experience its excellent performance.
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States Keep your sawmill bandsaw blades sharp with the entry-level Wood-Mizer BMS25 Sawmill Bandsaw Blade Sharpener! The index arm automatically advances the ... moresawmill bandsaw blade as the grinding wheel sharpens the face and gullet of each tooth.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Rated power: 450W. 450W pure copper wire winding induction motor. Long life and low noise. Band Saw Machine Woodworking Electric DIY Saw. 1 Band Saw Machine ... moreWoodworking Electric DIY Saw. Table scale clear, 0-60 degrees push ruler, ensure accurate cutting.
Buy It Now
Free Shipping Condition: New Location: Nixa, United States Blades are covered in a chapter of their own, describing steel types, tooth patterns, and maintenance, including how to braze a blade. Special sections ... moreare devoted to band saw accessories, how to deal with common problems, and how to maintain a band saw to keep it running effectively and efficiently for years.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States VEVOR 4-in-1 woodworking setup block bars can be used as a height gauge, depth gauge, square stacking, and angle gauge! 14PCS Premium Precision Setup ... moreBlocks Bars. High-Quality Aluminum Alloy: Crafted from lightweight yet robust aluminum alloy, these setup blocks woodworking ensure not only lightness and portability but also greatly enhance its wear resistance and durability, making it an ideal choice for prolonged, high-intensity use.
Buy It Now
$172.99 Shipping Condition: New Location: China Power: 2KW. Grind the tempering saw blade smoothly, and then place the saw blade on the chuck for secondary tempering. In general, it is appropriate to ... moresee the welding place gradually black, and it is best to see the fire light as small dark red.
Buy It Now
$173.00 Shipping Condition: New Location: China Power: 800W. Saw blade circumference: 730mm. Table size: 200mmx180mm. Weight: 8.5kg. Cuttable thickness: 70mm.
|
|
|
|
Shopsmith woodworking .bandsaw.jointer. Drill press.saw. tools,
This is a very nice. Has 2 accessories. Band saw and the jointer. The shopsmith motor runs good. And strong. The band saw works fine. And the jointer works good. It comes with everything u see pictured. Has the fence for the table. The drill arbor. The 2 ends for the lathe.and the wrench. This is pick up only. Question please ask. Has saw. lathe. Drill press. Band saw. jointer. Sander capable. The band saw has 1 small crack prob à inch long. can be glued back together no problem. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13e72ba354e-0xfc-
|
|
|
DAVIS & WELLS 20" HEAVY DUTY VERTICAL WOODWORKING BANDSAW - #DB-20-64
aims DAVIS& WELLS 20" HEAVY DUTY VERTICAL WOODWORKING BANDSAW- DB-20-64 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Davis& Wells. This is a used Heavy Duty Vertical Woodworking Bandsaw in GREAT condition. Specifications: Capacities: Throat: 20" Swing: 40" Maximum Work Height Under Guide: 13" Tables: Main Table Size: 26" x 26" Main Table Tilt: 45 degrees Tables Height From Floor: 40-1/2" Blade: Saw Band Length: 11' 8" Blade Wheel: 20" diameter. General: Electrical: 220 Volt. Three Phase Overall Dimensions: 44" x 42" x 78" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large ... moreselection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. DAVIS& WELLS 20" HEAVY DUTY VERTICAL WOODWORKING BANDSAW- DB-20-64 DAVIS& WELLS 20" HEAVY DUTY VERTICAL WOODWORKING BANDSAW- DB-20-64 DAVIS& WELLS 20" HEAVY DUTY VERTICAL WOODWORKING BANDSAW- DB-20-64 DAVIS& WELLS 20" HEAVY DUTY VERTICAL WOODWORKING BANDSAW- DB-20-64 DAVIS& WELLS 20" HEAVY DUTY VERTICAL WOODWORKING BANDSAW- DB-20-64 Reliable Tool Inc. c 2011 | Powered by
|
|
|
Powermatic 81 Bandsaw 20" Throat Welded Steel vertical Woodworking Extra Blades
P.O. Box 215 55 Oriskany Blvd Yorkville. NY 13495 Powermatic 81 Bandsaw 20" Throat Welded Steel vertical Woodworking Extra Blades, Vintage 1965[We believe] POWERMATIC Bandsaw Model# 81 Local Pickup[Syracuse. NY] Shipping Options may be available 315-768-2777 Description: 155 1/2" blade.includes extra blades[see photos] Cutting table has very slight wobble Used in shop class.looks in great condition.being replaced because they bought a new one Condition: This was used in a school setting. Retired in working condition. Please see all photos. Shipping: This is a PICK UP ONLY located in Manlius. New York 13104. Do NOT miss out! Payment: We accept PayPal. Payment must be received within 3 days of the end of the auction[unless prior arrangements have been made] If not. We will file a dispute against the bidder and re-list the item on ... moreeBay. For an eBay Motors sale. We require a $500 deposit within 48 Hours and the balance paid within 7 days[unless prior arrangements have been made] We do not collect sales tax on eBay motor sales vehicles. That is done by the state it is registered in. What's it Worth? 55 Oriskany Blvd P.O. Box 215 Yorkville. New York 13413 315-768-2777 Hours M-F 10-5[est] CLOSED Saturday& Sunday All items shipped or picked up within New York State will be charged your NYS local sales tax rate at the time of checkout. Our local rate is 8.75% If the buyer can provide us with a completed sales tax-exempt form. Then sales tax will not be charged Shipping: Your item(s) will be shipped within 2 business days of receiving payment. A confirmation e-mail. With tracking information. Will be sent to you when the item has been shipped. If you do not receive one, please contact us. see above) Any flat rate shipping is for the lower 48 states only. If your"ship to" address is in other US States or Provinces. Please contact us for alternative shipping options. All International Bidders Please Read Prior to Bidding. Please be aware that you are responsible for any taxes/tariffs/customs fees
|
|
|
15" HITACHI Vertical Wood cutting bandsaw Resaw Model B-600A Woodworking 110v
FREIGHT banded to a pallet OR LOCAL PICKUP ONLY More details will be added eventually Item. Vertical Bandsaw Re-saw machine Manufacturer. Hitachi Size. 15" Throat Depth Model. B-600A Serial. Blade Speeds. Table Size. Blade Length. The Tag says 75mm x 2812mm Blade Size. 1-1/8" is on it right now Wheel Diameter. 405mm Motor. 110 Volts it does not list a HP but it does say 6 amps so this would be 6a at 220v so figure 12a at 110v. 860 rpm 60 hz It also shows 230 volts but that is crossed out and it has a 110v plug on it so someone must have rewired it for 110v or perhaps ordered it that way from the factory. There is no tag at all on the motor. Equipped with. Mitre Gage. Rip gage, hand brake Height. 58" Overall and Height as it sits on the cart is 68" Weight. Approximately 295 lbs including the weight of the wood cart. This ... moresaw is on wheels. Shipping weight banded to a pallet, blocked in with boards and crated will be approx. 427 lbs. Condition. Very Nice used shape. Runs excellent We called Hitachi and they no longer make this exact model but The model that replaced it is over $3400 Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within 30 days of receiving it. And if it is in the same condition as when I first shipped it, and if you are willing to pay for shipping both ways. I am willing to ship this item banded to a pallet. See details below about banding it to a pallet. I do not list a shipping amount. I have no way to know what zip code it will ship to before it sells and zip code and weight are of course what determines the cost, plus shipping amounts do change occasionally and at our warehouse we do have walk in customers that buy items, so I do not package items up or band them to a pallet until they sell, plus this way I can also combine it
|
|
|
Davis & Wells 20" Vertical Bandsaw - Late Model (Woodworking Machinery)
BUYER MUST EMAIL PRIOR TO PURCHASE TO RECEIVE ACCURATE TOTAL WITH FREIGHT/CRATE CHARGES Davis& Wells Bandsaw Model No: N ot Available Year: L ate 1940's Condition: Good Rating: 3) Used/Tested Apx. Replacement Cost: N ot Available Technical Specifications: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Heavy cast iron frame 20 ¼” cast iron disc wheels T i l ts 45 degrees 26” x 26” iron table Adjustable hardened steel blocks. One piece cast guard completely covers blade when closed Cuts 13 ½” thick- 19 ½” between blade and frame. 115/208-230V. 60HZ, 3/4HP*Specifications listed are to the best of our knowledge* Verification available upon request* Our ratings are as follows: 1) New Surplus: Equipment or parts are new. 2)Demo/Floor Model: Demonstration use only. Like new. 3) Used/Tested: A complete ... moretest/cycle was performed and no issues were found. 4) Used/Pulled/Good: Pulled from a working unit. And because of proprietary design, the complete working unit was de-manufactured, and the parts sold. 5) Used/Untested: Items that we did not test or cannot test. This item was received by us as an individual part or integrated equipment that could not or was not tested. PLEASE VISIT OUR EBAY STORE FOR MORE GREAT PRODUCTS! Payment: Please do not submit payment until you receive a final invoice with all applicable charges. Should you submit payment without shipping. Handling charges, and applicable tax you will receive a separate invoice. Items will not be shipped until invoice is paid in full. Paypal is the preferred method of payment. Please email for alternate methods of payment should you wish to pick-up your item in person. Payment is expected within 5 business days from the date of sale. If payment is not received within 5 business days. The item will be re-listed and a non-paying bidder alert will be submitted to eBay. If you will not be able to submit payment within the 5 day period, please notify us immediately. We may be able to offer an extension. This arrangement i
|
|
|
CENTAURO C0-900 36" BANDSAW WOODWORKING MACHINE 31"x 46" TABLE 3PH
BT# 14354 TJ-099.1Y You are looking for: CENTAURO C0-900 36" BANDSAW WOODWORKING MACHINE 31"x 46" TABLE USED AND TESTED ITEM. IN EXCELLENT CONDITION! 30 DAYS WARRANTY! Manufactured by: CENTAURO. Additional info: BANDSAW WOODWORKING MACHINE Model: C0-900 Year 1996 Serial No. 0428 36" diameter wheels 2-1/2 HP direct drive motor 19-1/4" capacity under guide. 1/4" to 2" blade width capacity 31" x 46" tilting table with adjustable top guide maximum blade length is 251" Voltage: 460/60/3 phase Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 5 business days We ship with: Powered by
|
|
|
SCMI SC600 BANDSAW WOODWORKING MACHINE 33-7/8"x 24" TABLE 3PH 3.6HP
BT# 14352 TJ-099.1Y You are looking for: WEIMA WLH1300 WOOD WAST GRINDER 48"x17' INFEED SHAKER PAN CONVEYOR 75HP USED AND TESTED ITEM. IN EXCELLENT CONDITION! 30 DAYS WARRANTY! Manufactured by: WEIMA. Additional info: WOOD WAST GRINDER Model: WLH1300 Serial no. 600-418 Infeed Shaker Pan Conveyor: 48x17 inside dimension Feed Opening: 51.2x6 Rotor diameter: 14.5 Rotor Knives: 70 Rotor Speed: 450-600 rpm Main Motor:75HP Voltage: 460/3/60 Screen size: 9/16 Air Speed required: 3.000cfm Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 5 business days We ship with: Powered by
|
|
|
BANDSAW 32" WOODWORKING MACHINE
BT# 14353 TJ-099.1Y You are looking for: BANDSAW 32" WOODWORKING MACHINE USED AND TESTED ITEM. IN EXCELLENT CONDITION! 30 DAYS WARRANTY! Manufactured by: UNKNOWN. Additional info: BANDSAW WOODWORKING MACHINE Model: UNKNOWN. Size: 32" Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 5 business days We ship with: Powered by
|
|
|
18in Woodworking Bandsaw with Gil-built Parts - Local Pick Up By 6/16
18 inch woodworking bandsaw. 11 inch opening. Made from shop birch and custom milled oak. Gill built metal parts, two 124 inch blades, fence and miter guide. Designed for making the odd cut not for production. In excellent condition. Must be picked up in Medina. OH. Item must be picked up by June 16th. Posted with
|
|
|
INCA 10.5" WOODWORKING BANDSAW - SWISS MADE - Model 342
Inca 10.5" Bandsaw Very good condition. Motor runs well. All adjustments work properly with no significant wear. Only items in the photos are included. No miter gauge or blades) Has fence and dust port. Direct drive motor(from research I believe it is 3/4 HP- see label in last photo) I will consider direct delivery anywhere within the Chicago. Milwaukee, Madison areas. Please email with any questions. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13f54aa35d4-0xfd-
|
|
|
WADKIN BURSGREEN VERTICAL BANDSAW /W FEEDER ~ WOODWORKING MACHINE
Wadkin Bursgreen Vertical Band Saw for Woodworking. This saw is machine no. PBR-82207. Made in the U.K. 27" throat from saw blade to back of throat. Equipped with type BLG-8 Feed Unit. Currently has a 16'9" x 2" Hakansson Blade. Runs on 600V. Good Working Machine. Ask about shipping to your location.
|
|
|
POWERMATIC 141 Bandsaw 14inch Industrial woodworking machine
This is a really nice machine. It works great. I just replaced the wheel bearings. Blade guide bearings, and tires. It is ready for work. The 141 is constructed of a cast iron body with cast iron wheels, providing a very smooth running/cutting machine. Very easy adjustments and blade changing makes this a joy to use. The roller bearing blade guides make following a line effortless. Cuts smooth and strait. Great machine! Shipping could be arranged through a freight carrier of your choosing. It is at a business address and can be picked up by any of the freight carriers.
|
|
|
Lagnuna 16" Bandsaw, Woodworking, Metalworking
Laguna 16" Bandsaw Used but runs great Circa 1995 220V Solid built piece. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13fbcc64662-0xfe-
|
|
|
SHOPSMITH V WOODWORKING LATHE/JOINTER/BANDSAW/SCROLL/TABLE SAW w ACCESSORIES
SHOPSMITH V WOODWORKING LATHE/JOINTER/BANDSAW/SCROLL/TABLE SAW w ACCESSORIES THIS IS A VERSITILE TOOL FOR ANY SHOP. IT COMES AS PICTURED WITH THE ACCESSORIES PICTURED. THERE ARE ALOT OF PARTS. BLADES ETC WITH THIS LOT, SEE PHOTOS. THIS UNIT IS A BUYER TO PAY EXACT FREIGHT AUCTION.EMAIL US FOR A QUOTE. WE GET AMAZING RATES! THERE IS A $25 PALLET FEE FOR THIS ITEM! ALL emails received after 5pm MST will be answered the next business day. Therefore after 5pm on friday will be answered monday morning. No auctions will close on the weekends, but if you would like an answer about an auction please email us ahead of time.Thanks! Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. Most of the items sold on this page are surplus items from government auctions ... moreor bankruptcy sales. If the description does not say"New" then you are to assume it is a preowned item. We try to power up every item. But much of the time do not have the means to test items, therefore unless otherwise stated items are sold"as-is" You are welcome to email any questions and if we have the capability to answer we will. We are an ebay business and are committed to excellence in service and fairness, if we are aware of something wrong it will be stated. PAYMENT& SHIPPING Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. 1. Unless arrangements prior to auction close are made. All items will be shipped FED EX Ground Insured Delivery in the 48 CONTIGUOUS US STATES ONLY(UNLESS WORLDWIDE SHIPPING IS STATED IN AUCTION, THEN IT IS EXACT SHIPPING COSTS) 2. WE RESERVE THE RIGHT TO PULL ANY AUCTION AT ANY TIME! 3. Larger FREIGHT orders(pallets) are to be shipped FREIGHT COLLECT. or unless arrangements are discussed prior to shipping with me) at the expense of the buyer, we will assist in packaging/securing the items for shipment. 4. We gladly accept
|
|
|
JET 708749 JWBS-16 16-Inch 1-1/2-Horsepower Woodworking Bandsaw
JET 16" Bandsaw Model No: JWBS-16 Stock No: 708749 Dust Port: 4" Diameter Specifications: 1-1/2HP 1Ph. 115/230V Includes: Sturdy Closed Base with D oor. And Steel Wheels 17" Square table Carter Magfence II(worth $100) Powerful. Good Tracking, Very Little Vibration Accommodates 1/8" 1 1/2" Blades Resaw is 10"
|
|
|
Tannewitz Bandsaw 36" Model GHE Vertical Woodworking Band Saw
Tannewitz Bandsaw 36" Model GHE Vertical Woodworking Band Saw- SOLD AS SEEN IN PICTURES! Serial No. 11198- 480/120 V- 875 RPM- 17 Amps- 60 CY- 60 Hz- 1 PH- 2 W- Temp rise 55C- Model GHE; 5 HP; 9" under guide; connected 440 V; 35" throat with hydraulic brake& work light; 36" x 37" table. ubidonline Item Number: 0 813-60 AR You are bidding on( 1) Tannewitz Bandsaw We make every effort to communicate all of the details to make an informed decision. However, verification and perceived value may vary. If a condition or features are provided, they are ONLY done so as a COURTESY. You as a buyer are expected to know what you are purchasing and understand that all items are sold“as is, where is, with all faults” The more informed you are, the better your purchase decision. Since your needs are unique to you, your evaluations ... morewill be different from others. This item was purchased for resale and was NOT used by seller. This item can be previewed and inspected by appointment only at our location in Chatsworth. CA. If you have any questions, please call us at(818) 734-9043. Please ask ALL questions prior to bidding! Since I am not a dealer. This units is sold"As-Is" with"No Warranties" and"All Sales are Final" You may pay by personal/ company check. Cashier's check, or Pay Pal. Note: Merchandise will be held until funds clear. Buyer is responsible for ALL shipping& handling fees. Shipping Information: Pick-up location: Chatsworth. CA 91311 CUSTOMER PICK-UP PREFERRED Insurance Required: Varies on the selling price. Buyer releases Anthony Bertolino and/or Bertolino's. Bertolino Sales from any liabilities from this unit. All liabilities will be the responsibility of the buyer. Any problem with the item once received; please. Contact us first BEFORE leave your feedback. Merchandise must be paid for within 3 days. Please. Contact us for international shippin g. Happy Bidding!
|
|
|
2004 Veneta Shuttle CNC Bandsaw - sold by Biesse- Woodworking
2004 Veneta Shuttle CNC Bandsaw- sold by Biesse- Woodworking Call Justin to inspect at our facility 1-800-519-7147 ext. 101
|
|
|
Fay & Egan Lightning Line 950 36" Woodworking Band Saw Bandsaw
Fay& Egan 950 Lightning Line Bandsaw. 220 Volts Three Phase Direct Drive Solid Wheels Good Tires Good Guides Tilting Main Table 45 degrees right and 10 degrees left Fixed Rear Table 36" Throat Maximum Distance Under Guides 21" For more info on this saw go to Good working bandsaw. Just power it up and use it. Located in Somerset. New Jersey. All costs associated with rigging. Shipping and packaging are the responsibility of the buyer.
|
|
|
WALKER-TURNER 16" VERTICAL WOODWORKING BANDSAW
aims WALKER-TURNER 16" VERTICAL WOODWORKING BANDSAW read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Walker-Turner. This is a used Heavy Duty Vertical Woodworking Bandsaw in working condition. Specifications: Capacities: Throat: 16" Swing: 32" Under Guide: 10" Table: Table Size: 17" x 18" Front to Center of Blade: 7-1/4" Table Tilt: 45 degrees Table Height From Floor: 41" Blade: Saw Band Length: 113-1/2" Blade Wheel: 16" diameter. General: Motor: 3/4 Horsepower. 115/ 230 Volt, 1,725 rpm, 11.4/ 5.7 Amps, 60 Hz Electrical: 115 Volt. Single Phase Overall Dimensions: 46" x 29" x 70" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool ... morecurrently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. WALKER-TURNER 16" VERTICAL WOODWORKING BANDSAW WALKER-TURNER 16" VERTICAL WOODWORKING BANDSAW WALKER-TURNER 16" VERTICAL WOODWORKING BANDSAW WALKER-TURNER 16" VERTICAL WOODWORKING BANDSAW WALKER-TURNER 16" VERTICAL WOODWORKING BANDSAW WALKER-TURNER 16" VERTICAL WOODWORKING BANDSAW Reliable Tool Inc. c 2011 | Powered by
|
|
|
Tannewitz Model GH 36" Vertical Woodworking Bandsaw
Tannewitz Model GH 36" Vertical Woodworking Bandsaw General Info: Stock# CB-131003 Condition: Used Tested: Yes. Good Working Condition Brand: Tannewitz Model: GH Serial: 6113 Year: N/A Unit Weight: 2800 lbs. Unit Dimensions: 63" L x 48" D x 102" H Location: Stone Mountain. GA Specifications: 36" Diameter Steel Wheel. 7.5HP Motor, 230V, 3Ph, 36" x 37" Cast Iron table with-5 ° to +45° tilt. 35-1/2" Max. width cutting and 20" Max. Under guide, 1-1/4" Blade Capacity with tension indicator. Additional Info: Unit has been tested and is in good working condition. Equipped with Power Feed Roller powered by 1/4HP 115V Dayton Motor. Comes with Resaw Blade. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Drive Stone Mountain. GA 30083 It is always ... morerecommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
|
|
|
Northfield 27 woodworking bandsaw
Northfield 27 woodworking band saw. 240 3ph 7.5hp motor. Includes spare blade. Runs and works great. Currently in use in an active shop. Fantastic. Sturdy machine.
|
|
|
Powermatic Model 141 14" Vertical Bandsaw, 110V, Woodworking, Runs Great!!
Powermatic 141 14" Vertical Bandsaw General Info: Stock# GB-131002 Machine Name: Powermatic 141 14" Vertical Bandsaw Condition: Used. Excellent Tested: Yes. Good Working Condition Brand: Powermatic Model: 141 Serial: 8941188 Year: N/A Shipping Weight: 400 Lbs. Shipping Dimensions: 48" L x 40" W x 76" H Location: Stone Mountain. GA Specifications: The Powermatic 141 Bandsaw has a 14" Throat. Currently the Powermatic 141 Vertical Bandsaw runs off of 110V/1Ph Power. But can be wired for 230V as well. The Powermatic 141 has a 15" x 15" Cast Iron Table that can rotate 0- 45°. The Powermatic 141 uses a blade size of 94" to 96" and has a work height of 6-3/4" Additional Information: This particular Powermatic 141 Bandsaw we have in stock comes equipped with cord and plug along with a work ... morelight. Also. Comes with a 1/2" blade on the machine and 1/4" blade. All aspects of the Powermatic 180 Planer have been tested and are good working condition. Are you looking for a different machine than the one listed? Visit our to see other machinery options. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 If you are looking to upgrade to this piece of equipment from one you are currently using. Visit our to get a price quote on what we will buy or trade it for. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
|
|
|
Tannewitz Band Saw Bandsaw 30" Model PH Vertical Woodworking Band Saw
This Tannewitz PH band saw was fully restored. It was completely disassembled. All painted parts were taken down to bare metal, primed and top coated with acrylic lacquer. All fasteners and non-painted surfaces were cleaned of rust and grime and brought back to like new condition. The motor was disassembled and the old bearings were replaced with new ones and packed with new grease. New bearings were put into the upper wheel shaft housing and packed with grease. The upper and lower Wright blade guides had new thrust bearings and jaws added. The power cord and old electrical wiring was replaced and the electrical controls updated. Motor: Howell Electric 3 Hp. 220/440 Volts 3 Ph, 860 RPM Mechanical Brakes: Upper and Lower Comes with ½” blade. Can load on truck or trailer. Call Bill with any questions on the machine or for shipping arrangements. ... more973-975-8295.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-143feae98cd-0xfe-
|
|
|
FELDMAN LUMBER ERIE PA SAWMILL BENIE Cap/Hat woodworking tool bandsaw RARE EUC
EXCELLENT USED CONDTION RARE BLUE FELDMAN LUMBER COMPANY FROM ERIE PA SAWMILL PRODUCER.IT MEASURES 7 1/2INCH WIDE AND 8 1/2 INCHES LONG.PLEASE SEE PICTURES AND ASK QUESTIOSN THANKS Posted with
|
|
|
Rockwell Delta 20" Model 28-3X0 2HP Vertical Bandsaw, Woodworking, New Tires
Rockwell 20" Bandsaw Model 28-3X0 2HP Vertical Bandsaw General Info: Stock# GS-131094 Condition: Used. Good Tested: Yes. Good Working Condition Brand: Rockwell Model: 28-3X0 Serial: 1576713 Year: N/A Shipping Dimensions: 48" L x 40" W x 84" H Shipping Weight: 800 Lbs. Location: Stone Mountain. GA Specifications 20" Wheels. 19-3/4" Capacity to Column, 13-1/2" Maximum Under Top Guide, 24.5" x 20" Tilting Table, Miter slot table tilts 12°L& 45°R, Standard Blade Length 150" 2HP/220V/3Ph Motor. Additional Info: Saw has been tested and is in good working condition. Saw comes with brand new tires and blade that were recently installed on unit. Comes Equipped with Foot Brake and Miter Gauge. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. ... moreStone Mountain. GA 30083 It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Visit Us on the Web at
|
|
|
JET EQUIPMENT Model JWBS-14CS 14" Woodworking Bandsaw & JFF-14 Rip Fence NIB
JET EQUIPMENT Model JWBS-14CS 14" Woodworking Bandsaw& JFF-14 Rip Fence NIB JET 14" Woodworking Bandsaw Model No.JWBS-14CS Does not have base with motor in it. Can be used with a pulley system. Running of a main motor from other machinery. Or ideal to replace your worn out bandsaw with existing motor. VERY HEAVY Cast steel frame. High quality bandsaw. In almost new condition. Stored for years. I don't think it was ever used. Has developed a bit of minor surface rust on one of the joins(see photo) and the base plate from just sitting. Otherwise in EXCELLENT condition. Not a mark on it. The 240v lead has been crushed. And needs to be fixed up. Minor. Not sure how the base plate mounts to the bandsaw. Might be a couple of mounting plates missing, but unsure. Includes JET JFF-14 Rip Fence Assembly. Still in packaging and box, ... morewith instructions. PICKUP Upper Ferntree Gully VIC All in good working order unless otherwise noted. Bit of dirt and grease and tarnishing. But in good order. Postage may vary a bit depending on your address. i.e. Far reach W.A will incur a different postage cost) if in doubt, please ask. SEE MY OTHER ITEMS FOR GREAT COLLECTABLES. ANTIQUES, TOOLS& GARAGENALIA. TERMS& CONDITIONS OF SALE. IF I HAVE MISSED SOMETHING. AND YOU FEEL IN A NEGATIVE or NEUTRAL FEEDBACK GIVING MOOD, I implore you, please contact me first to see if we can arrange to turn that frown into a smile. I am an honest bloke. SOLD AS IS. NO RETURNS. EFT PREFERRED. PAYPAL ACCEPTED. Postage within 4 days from cleared payment into my bank account. Not from when you pay through paypal. that's why I prefer EFT. PICKUP WITHIN 3 DAYS OF ITEM PURCHASE FROM UPPER FERNTREE GULLY. VIC. 3156*PLEASE ASK FOR INSURANCE. IF ITEM GOES MISSING OR DAMAGED DUE TO AUSPOST. I CAN'T BE HELD RESPONSIBLE FOR THEIR SLOPPY SERVICE. RESPECT ME. AND I'LL TREAT YOU THE SAME. gsrx_vers_526(GS 6.6.6(526)
|
|
|
used Jet JWBS-20 20" 3 hp woodworking bandsaw
This is a lightly used 20" 3hp band saw which is currently wired for 220 VAC. I am selling because I don't do much re-sawing anymore and want to free up the shop space for another tool. It includes an upgrade kit for the blade guides(shown in the pictures. Above) Comes with a rip fence. I purchased this saw in approximately 1995. I specified local pickup only but we may be able to communicate about it and come up with some other arrangement.
|
|
|
4 different Bandsaw Blades from Mark V Woodworking Machine Used Nice Shape !!
This auction is for the Bandsaw Blades as pictured from a 1981 Vintage Shopsmith Mark V Power Tool Woodworking Machine from Vandalia Ohio Some dust and dirt minor wear and tear but In good working condition. It looks like the 1st 2 were lightly used-some dust rust but the other 2 look new-priced accordingly. Upper left 505580 1/4" Combination upper right 505581 1/2" Combination lowers left 505582 3/16" woodcutting lower right 505584 3/8" woodcutting Local Pick-up available. I will combine shipping on multiple purchases when practical. Please complete bidding then request a combined invoice. 14-012
|
|
|
11" Bandsaw Attachment #505641 for Mark V Woodworking Machine Used Nice Shape !!
This auction is for the Bandsaw as pictured with a photocopy of the Owners Manual and 2 other publicationsfrom a 1981 Vintage Shopsmith Mark V Power Tool Woodworking Machine from Vandalia Ohio Some dust and dirt minor wear and tear but In good working condition. Local Pick-up available. I will combine shipping on multiple purchases when practical. Please complete bidding then request a combined invoice. 14-012
|
|
|
Delta 28-254 14" Bandsaw woodworking best 3/4hp enclosed stand Platinum Edition
Delta 28-254 3/4 horsepower 14" Bandsaw enclosed stand mobile base 15+ extra blades 1/8" to 1/2" NEW 93-1/2" length see photos.excellent one owner condition local pickup only.fully assembled Posted with
|
|
|
Woodworking Equipment - 32" Bandsaw
Machine is single phase with a 2 hp motor. We are located in Sparta NC and have several pieces of equipment from a business that we closed. Call or text us at 336-572-2053.
|
|
|
Powermatic 81 20" Vertical Bandsaw, 220V, 3Phase, Woodworking, Band Saw
Powermatic 81 20" Vertical Bandsaw General Info: Stock# CB-141002-25 Machine Name: Powermatic 81 20" Vertical Bandsaw Condition: Used. Fair Tested: Yes. Good working condition Brand: Powermatic Model: 81 Serial: 66-3177 Year: N/A Shipping Weight: 1500 Lbs. Shipping Dimensions: 60" L x 48" W x 87" H Location: Stone Mountain. GA Specifications: Powermatic 81 20" Vertical Bandsaw. 20" Throat. 2HP Motor, 220/440V(Wired 220) 3-Phase, 2-Speed Belt setting for speeds of 2000 or 4500 SFM, Maximum Work Height 12" 24" x 24" Cast Iron Table, Foot Brake, On/Off control, Cord& Plug. Additional Info: The Powermatic 81 has been tested and the motor is in good working condition. The bracket on the table broke during transit which is why the table is not on unit. Unit is missing bottom guide for blade. ... moreSeller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 1380-A Beverage Dr. Stone Mountain. GA 30083 It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week.
|
|
|
DURACRAFT BANDSAW VS-312 VERTICAL 12 INCH 2 SPEED WOODWORKING WOOD BUILDING
Duracraft 12 inch. 2 speed, vertical, bandsaw, model VS-312. Tested and in working condition. No known or apparent defects. Item is used. Heavy item. Thanks for viewing 414-12359-9 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14575860581-0x117-
|
|
|
Rockwell Delta 20" inch woodworking bandsaw
This is a Rockwell 20" woodworking band saw. It is three phase motor. It came out of a school and in good shape. I can easily load it too. Auction is only for band saw. Call me at 908-797-3283 with any questions. There is currently no plug on it. Sold as is. Pickup only within 25 days of end of auction and pay cash at pickup.
|
|
|
“ POWERMATIC MODEL 81 20” VERTICAL BANDSAW, WOODWORKING, FOOT BRAKE 3 PHASE ”
Thanks for looking at this Powermatic Model 81 20” Bandsaw. This planer is an American classic! The machine starts and runs. And appears to work as it should. But is sold as is. Specs: Model 81 Serial No. 381177 Throat Depth: 20" Max. Work Height: 12" Table Size(Tilting) 24" x 24" Foot brake Dimensions: 46"L x 33"W x 77"H Weight: 1.250 Lbs. Electrical: 20A 250V. 10A 600VAC, 3PH Thanks for considering putting the bandsaw back to work! Shipping Terms All items for sale locally and are subject to prior sale. We only ship to confirmed and verified addresses by PayPal. Other addresses will require wire payment before shipment. We can always arrange for shipping if you need assistance. Customer pick-ups are always welcome as well. Give us a call if you have any questions(888-943-9033) Contact us during our scheduled ... morebusiness hours(M-F. 8-5 EST) and we will do our best to provide a freight quote within 24 hours or less. If you would like to get your own freight quote. Our zip code is 40213(we are classified as a business with a loading dock) Refund Policy Returns on new items only. No returns accepted on used items. Returns must be requested within 14 days of receipt of item. Any refunds granted will be in the form of money back. Return shipping fees will be payed by buyer. As Is Policy Used items are sold as is. No warranty is expressed or implied. While the items appear to work as they should. We make no guarantee that they will. Contact We pride ourselves on honest. Friendly service. Do you have a particular piece of equipment you’re looking for. But don’t see it in our store? Call us!we might have it in stock. The equipment on our eBay store is only a fraction of what we have in stock at any given moment—we might just have exactly what you need! You can reach us by phone Monday- Friday 8:00am- 5:00pm EST at 888-943-9033 or by mail at 4603 Poplar Level Rd. Louisville, KY 40213.
|
|
|
Vintage 93" Band Saw Woodworking Blade Wood Bandsaw #4 Tool
Your Bid For This Vintage 93" Band Saw Woodworking BladeIn Good Condition Has Some Rust But Can Be Cleaned. Questions Welcome And NO RESERVE! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-146b8c1a820-0x10c-
|
|
|
1987 FINE WOODWORKING Magazine #63 Bandsaw Spindle Turning Music Stand ++
FINE WOODWORKING Magazine Issue#63 March/April 1987 Contents include: Spindle Turning Working with an old-time turner The Custom Fitted Chair Shop-Built Disc Sander Holding the Notes- adjustable music stand The Mouseman of Kilburn Making and Using a Northwest Coast Adze Getting the hang of an ancient tool Home-Shop Bandsaws Three-wheelers. Two personalities Bandsawn Boxes from Buds Painted Carvings Oregon Show Laminated Spinning Wheel Pneumatic Laminating Tools for the Making Good condition overall. With light wear; interior pages are clean and complete. SHIPPING& PAYMENT INFORMATION GROVE BOOKS is located in Canada near the US border. In order to offer the best possible shipping service to our customers, we ship by both USPS and Canada Post For our US and international customers. We usually ship once a week, from Michigan USA- BOOKS ... morewill usually be shipped by USPS MEDIA MAIL; all other items. Such as magazines or pattern books, will be shipped by First class mail, or Parcel Post, depending on weight. CANADA- Please note that shipments to Canada will be charged GST/HST. INTERNATIONAL- Please email for shipping cost to your country if it is not shown at checkout International Buyers- Please Note: Import duties. Customs fees and taxes and other charges may be levied by your country's government; these are not included in the item price or shipping cost. Each country has different import regulations- please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Please do not ask us to mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. grovebooks mag9 AuctionSageSoftware since 2002 The World's Best eBay Seller Software
|
|
|
Woodhaven precision miter gage woodworking bandsaw tablesaw mitergage stop
More woodshop machinery photos at this link: and a few videos here too Looks never used. 36 inch long fence extension, with adjustable stop. Woodhaven precision quality. Will work well on bandsaws and table saws. no bench included at this price) Thanks. SHIPPED F.O.B. from 60115, no charge to load a flatbed or your own truck with no pallet Email us your business zip and we will get a freight quote. We do not mark it up if you pay direct to freight companay(at our discounted rate! we enjoy visitors by appointment in our 20.000 sq foot workshop 60115, please phone first(815)758- 6534 More woodshop machinery photos at this link: and a few videos here too We specialize in solid wood processing machines. Share extensive rebuild knowledge, and stock 20,000 sq. foot of used machines. You get our 40 years of experience as woodworkers and manufacturers ... morePLUS 20 years as used equipment rebuilders and dealers, to help you choose the right woodworking equipment for your shop. We have been serving skilled craftsmen, world-class manufacturers, and serious hobbyists since 1989. We stand behind the used equipment we sell, guarantee our rebuilt woodworking machinery, and want you to be satisfied with your machine. Please Call(815)758-6534. Thanks for looking at Pleasant Street Machinery! For the past 20 years we have specialized in rebuilding woodwork machines that are ready to work and do what you want them to do. Our inventory is constantly changing and we get most machines from our clients.send us an email OR CALL(815) 758- 6534. Thank You! Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. Fees A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. There is a $5.00 handling fee on
|
|
|
Scotty's 14" BANDSAW JM-8100 (Never Used) AND Full Set Of Woodworking Tools
This auction is for a full set of woodworking tools that includes; 01) Scotty's JM-8100 Band Saw that has never been used. 01) Craftsman Router, 01) Black and Decker Circular Saw, 02) Craftsman Jigsaws, a Pad Sander and Assorted Hand Tools Including Planes, Rasps, Files Carving Tools. Just about everything you would need to start up a home woodworking shop or to use as backups for an existing shop. Not top of the line stuff. But very well cared for and in good working order. Auction includes all the tools pictured. Bid With Confidence and Local Pick-up only. Thanks for Bidding and Good Luck!
|
|
|
JET JWBS-14 14" WOODWORKING BANDSAW RUNS WELL - NEEDS SOME WORK AND SMALL PARTS
Up for your bidding consideration is this used Jet JWBS-14 14" woodworking bandsaw. This saw is in overall fair to good working condition but is going to need a couple minor parts to make it fully operational. It is missing a couple of knobs that hold the doors closed and it is missing part of its blade tensioner assembly and the set screw/bolt that holds the thickness adjuster is also missing(see pictures) I looked them up and to buy these parts new. You'll have less than $100 in parts, yet used parts are available from time to time here on eBay for considerably cheaper. The saw does start and run. The motor and drive system all appear to be in operational condition. There is a slight bump/dent on the unit's base, but this can easily be repaired. New, this saw is around $600-700 and with a little work and a couple parts this ... moreone can be just as nice. This is a'No Reserve' auction with a $49.99 start price. If you win, you'll have to come pick it up here, as I will not ship this item, via freight. Figure your travels to zip 46350. The provided pictures should speak for themselves. But if you have any questions, please feel free to ask and ask any questions"before you bid" Please note: This is my livelihood. My income, my way of life, so please if you bid on one of my items and win it, I ask you to please pay for it and in a timely manor(within a day or so) Lately, I have been stiffed on quite a few larger dollar items that people bid on numerous times and never pay for them. This sets me back a couple weeks financially, so a speedy payment is greatly appreciated. I try my best to provide quality items and service to ALL of my customers here and abroad and take great pride in my workmanship, so I would appreciate payment for all items that are won in any of my auctions so that I can continue providing quality items to the eBay public. If you are having issues with finances and can not afford one of my items, PLEASE refrain from bidding on them and allow someone else to utilize the
|
|
|
5 bandsaw boxes and woodworking books
Boxes with band saw- Ventura. Ultimate band saw box book- Menke. Router table- Mehler. Band saw- Duginske. Shipping to continental US only. No PO box addresses. Bidders must have a minimum of 5 successful bids with 100% feedback as a buyer. I will not take responsibility for damage caused by UPS. Packages are sent fully insured. BEFORE SIGNING FOR PACKAGE- inspect packaging and contents for damage. And report it immediately to driver for a reimbursement claim directly from UPS. All packages are carefully wrapped with bubble wrap. Foam and/or peanuts to insure safe arrival of your purchase. All books are in excellent condition.
|
|
|
WOODWORKING MACHINERY EQUIPMENT LATHE PLANER BANDSAW JOINTER BANDSAW TIMESAVER
Hello/ Bonjour, Up for sale is a 12 piece lot of professional woodworking equipment in great working condition. A well known Montreal area furniture maker is closing its doors after 30 years in business and is looking to sell off its equipment. Items for listed for sale are: 1) General 1.5 HP mortising machine using knives. With inclinable table. Model#220. 1) Mortaiseuse de marque General. A bedanne, 1,5 HP avec guide inclinable. 2) A vertical air compressor. Ingersoll Rand. T30, Model#2340L5. 2) Compresseur d'air vertical. Ingersoll Rand, T30, model 2340L5. 3) Zefam 20" Shaper. 7.5 HP. 4 cutters with an extra set of knives. 3) Degauchisseuse 20" de marque Zefam. 7,5 HP, 4 couteaux, avec un jeux de couteaux extra. 4) Sipa bandsaw(Italy) Model GC800, 30" open neck capacity, 600 volts. 4) Scie a ruban en fonte. De marque ... moreSipa, Italie) model GC 800, 30" au cygne. 5) General 10" table saw. Model#350. 5) Banc de scie 10" De marque General, model#350. 6) General wood lathe. Model#260, 12" x 42" lathe, 10 speed lathe, with turning plates and accessory. Does not include knives. 6) Tour a bois 42" de long. De marque General, model#260, rallonge de 4" pour le diamètre de tournage, avec plaques et accessoires, sans les ciseaux 7) TOS make. wool chuck) Model#160-3-2-M1, as seen in image 7) Mandrin de tour a bois. De marque TOS, model#160-3-2-M1, mâchoire écartante et serrante 8) 36" planner. Lacasse make, now General, 6 blade, 3 motors planner, Model#70, 30HP, with motorized table rid, extra set of blades. 8" maximum height. 8) Planneur- raboteuse de 36" De maque Lacasse, General) model#70, 2 jeux de 6 couteaux, 8" hauteur maximum, 3 moteurs, 30HP, table ajustable électrique. 9) Delta Rockwell drill press. Model#70-200C, 5HP 9) Perceuse a colonne. De maque Delta, model#70-200C, 5HP 10) AEM Model#370. 36" wide belt sander(American Equipement Machinery) 20 HP, commonly called a time saver. like new. 10) Sableuse a ruban 36"
|
|
|
5 Pack of Woodworking Books: cabinetmaking, finishing, bandsaw, bookcases
Do you want a six pack? This sale includes all 6 books. All in decent shape. Get 6 books for the price of 1. Quick start your library! Perfect gift for a woodworker, hobbist, homeowner, whether new in the craft or experienced. Rodale's Illustrated Cabinetmaking: How to Design and Construct Furniture. SBN-10 0875967965 Step-by-Step Deck Projects. By Better Homes& Gardens, ISBN-10: 0696207796 Understanding Wood Finishing: How to Select Apply Right Finish by Flexner. ISBN-10: 0875965660 Using the Band Saw: Techniques for Better Woodworking by Nick Engler. ISBN-10: 0875961401 Bookcases. Shelves& Cabinets(Woodsmith editors) ISBN-10: 0848726758 Check out the photos and buy now!
|
|
|
SHOPSMITH MARK V 510 Pro Woodworking Machine Tool Bandsaw Jointer + Lot extras
ShopSmith Mark V PRO model 510 This is the Ultimate Woodworking Shop Tool! Professional Quality. This unit is in excellent condition and works perfectly. The older gentleman that owned this never used it only but a few times and keep it covered and stored indoors. Super clean and LIKE NEW! It is a must for anyone who enjoys woodworking. You get everything you see in the pictures. Including original manual, operations guides, complete specs w/ parts lists, lessons, several other publications by Shopsmith. This Shopsmith Mark V model 510 can do everything! This one machine can transform quickly into all of the following: Table Saw-Band Saw-Shaper/Router-Lathe-Lathe Duplicator-Drill Press-Horizontal Boring machine-Mortising machine-4" Jointer-Disc& Drum sander*Including a ton of extras. Which most are BRAND NEW! Just to list a few. ... more3 floating extension tables with legs Extra 4" jointer blades and"jointer pal" Disc sanding discs Lathe Knives(2 sets) Rip Fences(2- Bandsaw& Tablesaw) Miter Gauge Fence Bandsaw circular cutter Extra Tablesaw Blades Extra Bandsaw Blades 4 Router bits. 5 drill bits, 4 square mortising bits Feather boards. Push blocks, etc. Arbor wrench. Drive wrench, 4 Alan wrenches Tail stock and lathe rest Complete lathe duplicator kit 2 Drive guards 2 Drive belts Vinyl cover You won't be disappointed! LOCAL PICKUP ONLY! Will not ship
|
|
|
Rikon 18" Woodworking Bandsaw Model 10-345 with Instructions
Model 10-345 The Rikon 18" bandsaw features 2 speeds. 1510/3220 ft/min, which are easily changed using the unique belt tensioning hand wheel. The 142" blade is powered by a 2-1/2 HP. 220V induction motor. Blade width is 1/4" to 1-1/4" max. Cutting height is 12" and width is 18-3/8" Table width is 21" x 19" and includes 2 T-slot grooves. Table tilts 10 degrees left and 45 degrees right. Height from floor is 37-5/8" Changing blades is easy with the Rikons exclusive hinged blade guard providing over 2" of access and a blade site window. Quick release blade tension lever. I have included the link to a you tube video for a visual explanation: http:www.youtube.com/watch?v=ZFsgxIknrTg
|
|
|
Jet JWB5-18X 1 3/4HP 18" Woodworking Bandsaw
Jet woodworking bandsaw used very little and in excellent condition. Includes 1/8" 3/4" blades and a 1" resaw silicone steel blade. Satisfaction guaranteed. Pick up only. Will meet part way for gas. See my other auctions.
|
|
|
Jet JWBS-18 1 1/2 HP, 115V, 1 Phase - 18" Woodworking Bandsaw
JET 18" Bandsaw. 1 1/2 hp motor Bought in 2004. For starting up a larger woodworking shop- just one problem! Never really had a need for it! This saw has been totally covered from dust. And treated with T-9 to prevent rust. There are some bolt heads and small items that have a small amount. But the table never had any rust on it. Comes with one of those magnetic table covers that helps a lot. Carter mag fence included also. I spent a good amount of time one winter and aligned the wheels very accurately. Runs very well and smooth. Any questions. Feel free in contacting me. If you make an offer. Please disclose your PICKUP Plan! That can be almost as important as the price! PICK UP ONLY.
|
|
|
j-line 120 20" Vertical Bandsaw, 1.5HP, Foot Brake, 110V, 3-Phase, Woodworking
this saw is a j-line 20" band saw takes a 12' blade is a three phase saw Strong industrial band saw used for cutting wood mostly but can be converted to use for metal. Throat 20” Max. Cutting Height 14” Motor 1.5 HP 110 Volt 3 Phase Table 20” x 24” Tilts 45 Left and 15 Right Blade 1” x 144” Speed 3000 FPM will help with shipping but i will not offer a shipping option it is up to you to find a way to get it to you or pick it up
|
|
|
Oliver Vintage 116D 36" Bandsaw Woodworking A416
Pretty good old Oliver massive 36" Bandsaw- this one with the rare aluminum top wheel. These bandsaws rate as Super Aesthetic on account of the fact that they've got that unique direct motor drive design that Oliver lovers the world over seek out because they look so cool. And they do. Too. This here example will provide hours of design appreciation time as it requires that beautiful motor to be pulled out so as to replace the lower wheel bearings. Which are shot to hell. While your at it. It'll need tires, top and bottom. Did you happen to notice the cracked tracking mechanism thing-a-ma-jig that is cracked? And yes. Of course the fucking part is cast, but that's really no big deal to fix, just one more thing that needs to be done as part of it's restoration. So what? Some Oliver collector show up and haul this beauty ... moreoff for $500. Will ya? Specs- Model# 116-D Serial#61347. Not sure of the year of it's birth. 5hp. 220/440vt, 3ph, Dirrct Drive motor. 36"x36" table. Foot Brake.
|
|
|
Used Shopsmith Woodworking Lathe--includes bandsaw-jointer-belt sander-more
This item is my Dad's and I'm selling it for him. The item is a used Shopsmith Woodworking Lathe. Includes: Bandsaw. Jointer, belt sander, manuals and accessories. If you have any questions, please contact me and I'll ask him your question.Please note that there is a reserve price on this item. If the reserve price is not met at the end of the auction and if the highest bidder is close to the reserve price and my Dad decides that he will accept that price, I will contact the highest bidder and let him know that he will accept that price.Please send PayPal payment within 5 days after auction ends. After payment is received, I will ship the item out to you. There are no returns. Thanks for looking!
|
|
|
Woodworking - Jet Dust Collection, Delta 20" Bandsaw and More
Woodworking Machines for Sale Downsizing shop- These machines are all in working order ready to go to work. We have taken care to clean. Wax and oil all of these machines. Sold 1) Delta Unisaw Tablesaw with outfeed table. Asking $1,400 obo, sold for $2,200 brand new, current new model is over $3,000 Sold 2) Powermatic 8 Jointer. Aksing $1,250 obo, sold for $2,245 brand new. 3) Delta Stock Feeder. Aksing $450 obo, sells new for $700, currently mounted with the Powermatic jointer but can be sold seperately. Stock photo provided. 4) Jet Dust Collection System. Aksing $350 obo, sells new for $500 brand new. 5) Delta 18x36 Drum Sander open stand and mobile base. Asking $800 obo, Sells for $1,300 brand new. 6) Large Band saw 3 phase with 3 phase inverter. Asking $800 obo. 7) Two Floor Mount Drill presses. One radial& the other older model with ... morefoot option feed, Asking $200 for either drill press. We are prepared to make package deals for multiple machines. You are responsible for all pickup or shipping. We can help load.
|
|
|
JET 18'' JWBS-18 WOODWORKING / METAL CUTTING BANDSAW
JET JWBS-18 BAND SAW. COMES WITH 3 NEW WOOD BLADES, 2 NEW METAL BLADES, AND THE BLADE THAT IS INSTALLED IS IN GOOD SHAPE. WORKS GREAT. ASK BEFORE YOU BID!LOCAL PICKUP ONLY.NO RESERVE. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1488595a397-0x109-
|
|
|
Jet 18" Woodworking Bandsaw model JWBS-18 Band Saw
Jet 18" Woodworking Bandsaw model JWBS-18 Band Saw Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge VERY NICE JET 18" WOODWORKING BAND SAW MODEL JWBS-18 INCLUDES FENCE COST OVER $1800. NEW IF YOU HAVE ANY QUESTIONS OR WOULD LIKE TO SET UP A TIME FOR INSPECTION CALL 386-871-2302 SHIPPING LOCAL PICK UP ONLY ITEM IS LOCATED IN THE DAYTONA BEACH FL AREA 32117 PAYMENT WE ACCEPT PAYPAL CREDIT CARD PAYMENTS OR CASH. UPON PICK UP inkfrog terapeak. I000000.
|
|
|
TANNEWITZ 42" BANDSAW GHE WOODWORKING
42 MACHINE 3 PHASE WE ALSO HAVE AN 36" OLIVER CALL FOR INFO WE DO NOT COLLECT THE SHIPPING THIS IS JUST AND EST
|
|
|
Shopsmith Mark V 520 7-in-1 Woodworking System w/ Bandsaw and Accessories
Shopsmith Mark V Model 520 in excellent condition. Over $4.000 plus shipping if purchased new today. This unit has spent most of its life still boxed up in the originally factory crate. Low hours. Always stored covered in a garage. No rust on tubes. There are a few scratches in the finish. Listing includes: Shopsmith Mark V 520 with Pro Fence System and Table Extensions. Has all the accessories originally shipped with this model including safety equipment, face plate, alignment tools, wrenches, turning centers, 5 lathe chisels, tool rest, apron and manuals. Accessory Tool Shelf to hold most accessories. Router Chuck with pen mandrel. 5/8 inch Saw Arbor so standard 10inch saw blades can be used. Shopsmith 1 1/4 arbor also included. Three Steel Sanding Discs with 3 packages of sanding media discs. Drum Sander Sharpening Guide for sharpening ... morelathe and other chisels. Two sets of Dado Blades and Several 10inch blades. These have surface rust that can be easily removed with rust remover. Shopsmith Bandsaw with offset brackets. These brackets allow bandsaw to stay mounted on Shopsmith when switching from horizontal to vertical mode and back. Three blades: 1/8inch, 1/4inch and 1/2inch Extra set of urethane bandsaw tires"Cool Blocks" blade guides installed. Table upgrade with bandsaw fence and circle cutter attachment
|
|
|
118RES220 NEW RIKON 14' DELUXE WOODWORKING ' BANDSAW MODEL 10-325
NEW 14' DELUXE WOODWORKING BANDSAW BOUGHT AND LOSE SOME PARTS GREAT IF NEED PARTS FOR YOURS NEVER USED CALL JOE OR RICH. AT 1718 649 6660 EX231 AFTER 1 PM
|
|
|
Industrial WALKER TURNER 14"Metal Bandsaw Saw Wood Shop Woodworking Art Deco
Vintage WALKER TURNER 14" Metal Bandsaw Band Saw Saw is in good looking and working condition. 1/2 hp USA. 1 phase motor, 7" material height. Rubber on running wheels is in good condition, table tilts. local pick-up 17737 Any? call 570-560-3874
|
|
|
DELTA 28-276 Professional 14-Inch 3/4-Horsepower Woodworking Bandsaw
This is a Delta Band saw I purchased new. And have used very little in a home shop. It is in very good condition and works great. I recently purchased another saw, is why I am selling this one.
|
|
|
Oliver Bandsaw 36" Model 416 Vertical Woodworking Band Saw
Up for sale is a nice Oliver 36" bandsaw everything works as it should. The bearings are good. It comes with the blade welder and a original light that is unbolted because it is getting cleaned up when the picture was taken. The tires have some cracks they could use replaced or use as is your call. Comes with two blades that may need sharpened. this thing weighs in around 2700 lbs and is a little less then 9' tall. It is powered by a 5hp direct drive 3ph motor. I have a lift to load in into a trailer. If you want it shipped I can provide a heavy duty pallet to bolt it too. I can lift it onto the back of a truck as long as the door is high enough. Shipping costs are on the buyer if you prepay the shipping costs and arrange for it to be picked up at my business I will load it. I believe with the wheel all the way down it is around ... more85 tall. This is one of the best bandsaws every made.
|
|
|
MD DARIO, SV3, Woodworking Bandsaw,Corbelling,Timber Scallops,Beam Rafter Ends
LOCAL PICK UP! PLEASE Google for better info. MD Dario sv3 band saw and articulated arm in working condition but needs some electrical work. Sold as pictured, front plastic cover has many chips/ cracks but could be fiber glassed Arm not pictured but included. Will add a photo later. Approx. 5000.00 value if new! To cut large size parts in series. Large corbels, beams scallops etc. Sawing machine SV3 with articulated arm. Two hand control increases safety but has had the switches by-passed/ removed and altered& will need repair for OSHA job shops. See all pictures for condition. Some fins on the motor are broken off and the magnetic elec. Brake has been disabled, the safety switches have also been altered, these band saw operate without a table and o ne can be ordered from the factory or made up in your own shop. Can be mounted to a bench& ... moreused as a regular band saw if a table is added. 220v 1 ph MADE IN ITALY. SPECIALITY SAW FOR CUTTING CORBLES, NEEDS SWITCH AND SOME ELEC. REPAIRS OTHERWISE IT'S A GOOD CUTTING SAW. Dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14b5e3cbdee-0x104-
|
|
|
SHOPSMITH MARK V COMBINATION WOOD LATHE / BANDSAW - WOODWORKING
If you have any questions regarding this machine. Please contact Giovanni@ 909) 652-1400 Make: Shopsmith Model: Mark V Condition: Good Features: Multiple Applications Attachments allow for various functions Specifications: Lathe: Swing: 15" Table Saw Table Dimensions: 14" x 19" Table Tilt: 45 degrees Arbor: 5/8" Travel: 4-1/4" Bed Post Diameters: 1-3/4" Bandsaw: Bandsaw Table Dimensions: 11-3/4" x 12" Dovetail/ Slot Width: 0.725" 18.5mm Table Tilt: 45 degrees Throat: 10.5" Blade Wheel Diameter: 11.5" Band Dimensions: 1/2" width x 72" length(approx. Max. Work Height: 6-1/4" General: Horsepower: 3/4 Voltage: 115 Volts Amps: 8.5 Overall Dimensions(w/ Bandsaw attachment mounted) 72" x 25" x 64" tall Overall Dimensions: 72" x 25" x 42" tall Comes ... moreas shown in pictures. GUARANTEE: If any machine guaranteed by us does not prove satisfactory mechanically. The Purchaser may return it freight prepaid within 14 days from date of shipment and we will refund the purchase price in full. This does not apply to machine sold“as is” or“subject to inspection” This guarantee applies only to machines which we own. The machine must be returned in the same condition that it left our warehouse. MachineStation shall not be responsible for any damage done by truckers, riggers, or other parties. Machine damaged in shipping are not covered under the return privilege. WARRANTY: Seller makes no warranties of any kind whatever. Expressed, or implied. All specifications and descriptions of said goods are approximate, not binding and meant only as a guide. It is the Buyer’s responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods confirm to the Buyer’s requirement. MACHINE USE AND SAFETY: Buyer acknowledges that the goods described herein are pre-owned used goods which were neither designed or manufactured by the Seller. Nor has the Seller knowledge of, or control over, the prior use or misuse
|
|
|
Jet jwbs-14os woodworking bandsaw band saw
Jet jwbs-14os bandsaw. Works great, used very little. 115vac, with 4 blades Part Number: 708113A Cutting Capacity Width: 13½" Cutting Capacity Height: 6" Minimum Saw Blade Width: 1/8" Maximum Saw Blade Width: ¾" Blade Speed: 3000 SFPM Blade Length: 93½" Table Dimension(LxW) 14 x 14" Table Tilt: 15 ° left. 45 ° right Table Height From Floor: 44" Dust Port Outer Diameter: 4" Dust Collection Minimum CFM: 300 cu.ft/min Stand Type: Open Bandsaw Size: 14" Wheel Diameter: 14" Motor Power: ¾ HP Motor Voltage: 115/ 230 V Prewired Voltage: 115 V Motor Current: 7/ 3.5 A Motor Phase: 1 Ph Overall Dimensions: 68 x 24 x 26-1/2 Height: 15" Width: 20" Length: 45" Net Weight: 172 pounds. PLEASE READ BEFORE BIDDING: EBAY STORE NAME: industrial tool and machine works ... moreEBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photo
|
|
|
Vintage Antique Bandsaw Setter Cabinet Maker Band Saw Set Woodworking Cabinetry
Vintage Antique Cabinet Maker's Woodworking Cabinetry Joinery Band Saw Set Bandsaw Setter Setting ViseTool 1915-1920s With plaque that reads Bell Cabinet Co. Ser. No. 3364. Weighs about 11 Lbs. 12 oz. An outstanding rare vise and clamp based band saw setting tool for your enjoyment in the shop and your collection. Rare item would make an outsanding gift. See MORE photos below. Condition is Very Good for its antique age. Showing signs of age and usage. Part of one lever on a two lever handle appears to be broken off. Otherwise. No major issues. Would have originally had a crank wheel off the shaft. The metal is strong and durable. Signs of surface rust only and really great looking. No paint; some photos show green tint due to lightening for better viewing. Please see more of our closeup photos below. Bandsaw setter. Where the shaft extends ... moreout on the one end there used to be a 6 to possibly an 8" wheel that went on that shaft with a handle sticking out so it could be cranked. if you look under the base that shaft resembles a small camshaft. When cranked it moves the articles on top back and forth on each side of the vise. The 2 rods alternately set the teeth of the blade back and forth. Another rod running parallel with the vise feeds the blade through the machine. Brass plaque on one end has"Bell Cabinet Co. Ser. No. 3364" 1915-1920s band saw set from a cabinet or wood working shop. Nice wood finishing tool. All of the moving or settable parts seem to work as they should. Iron and steel. Solid and heavy. For bench or table use. It is very hard to find and quite rare but we found a friend who let us know what it is. 12 1/2" inches at longest by about 7" inches at widest and approximately 8 1/4" inches at tallest. Weighs 11 Lbs. 12 oz. Will be packaged very securely for safe delivery to you. Feel free to Visit TLC-SLO Collectibles eBay store and view other interesting. Collectible, educational and useful items in various easily searchable categories. International customers please
|
|
|
JET JWBS-14CS 14-Inch 1 Horsepower Woodworking Bandsaw 115/230-V w/ Mobile Base
JET 708115K JWBS-14CS 14-Inch 1 Horsepower Woodworking Bandsaw with Graphite Guide Blocks. 115/230-Volt 1 Phase- MOBILE BASE INCLUDED LOOK BELOW FOR MY OTHER JET WOODWORKING MACHINERY! Cutting Capacity(H/in) 6 Cutting Capacity(W/in) 13-1/2 Min Saw Blade(W/in) 1/8 Max Saw Blade(W/in) 3/4 Saw Blade(L/in) 93-1/2 Table Size(in) 15 x 15 Table Tilt(R x L) 45 degrees x 10 degrees Stand Type: Closed Table Height From Floor(in) 43-1/2 Dust Chute Diameter(OD/in) 2 Overall Dimensions(HxWxD/in) 68 x 26 x 19 Motor(TEFC) 1 HP. 1 Ph, 115/230V, Prewired 115V Blade Speed(SFPM) 3.000 Net Weight(lbs) 185 I HAVE FOLLOWING SIMILAR JET WOODWORKING MACHINERY FOR SALE JET 708411 JOVS-10 5-1/2-Inch Oscillating Vertical Spindle Sander 115-Volt 1-Phase $750 JET 708595 JSG-96 6-Inch/9-Inch 3/4-Horsepower Benchtop Belt/Disc Sander. 115-Volt 1-Phase w/Closed Stand $599 ... moreJET 708524 JPM-13CS 13-Inch 1-1/2-Horsepower Planer/Molder. 110/230-Volt 1-Phase $699 JET 708458K JJ-8CS 8-Inch 2 Horsepower Jointer. 230-Volt 1 Phase- MOBILE BASE INCLUDED $799
|
|
|
SCMI SC600 24" Bandsaw (Woodworking Machinery)
BUYER MUST EMAIL PRIOR TO PURCHASE FOR ACCURATE FREIGHT& CRATE CHARGES SCMi 24" Band Saw Model: SC600 Year: 1989 Condition: Great Rating: 3)Used/Tested Replacement Cost: $ 5.980.00 Technical Specifications: 230V. 60CY, 3PH 24" Wheel Diameter Adjustable Rip Fence 33-7/8" x 24" Table Tilts 0 Degrees-30 Degrees 3.6 HP Direct Drive Motor All specifications are listed to the best of our knowledge. Please email with any questions prior to purchase. Machine Ratings: 1) New Surplus: Equipment or parts are new. 2) Demo/Floor Model: Demonstration use only. Like new. 3) Used/Tested: A complete test/cycle was performed and no issues were found. 4) Used/Pulled/Good: Pulled from a working unit. And because of proprietary design, the complete working unit was de-manufactured, and the parts sold. 5) Used/Untested: Items that we did ... morenot test or cannot test. This item was received by us as an individual part or integrated equipment that could not or was not tested. Payment: Please do not submit payment until you receive a final invoice with all applicable charges. Should you submit payment without shipping. Handling charges, and applicable tax you will receive a separate invoice. Items will not be shipped until invoice is paid in full. Paypal is the preferred method of payment. Please email for alternate methods of payment should you wish to pick-up your item in person. Payment is expected within 5 business days from the date of sale. If payment is not received within 5 business days. The item will be re-listed and a non-paying bidder alert will be submitted to eBay. If you will not be able to submit payment within the 5 day period, please notify us immediately. We may be able to offer an extension. This arrangement is on a case by case basis. Shipping: Buyer is responsible for all shipping. Crate, freight charges, and any applicable taxes. Items will be shipped within 10 business days from the date payment is received/cleared. A tracking number will be provided upon shipment of your item. Please ensure we
|
|
|
Woodworking Tools, Delta ,Rockwell,Bandsaw tool.
Here we have a Delta/ Rockwell Band saw motor and pulley cover in superb condition.Iron/Steel as originally issued!It's for an 14" Band saw. Never used. A few tiny scratches and some minimal signs of rust, as shown in my photo's!It's just like new otherwise. Questions will be answered promptly. Shipping for this item is only for the lower 48 States! PayPal only, unless you contact me first. Good luck on your bidding, and thank you.
|
|
 |