|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: East Bend, United States Item model number JT630H. Part Number JT630H. Bevel the fence up to 45 degrees to create angled cuts along the faces of your boards. Compatible with the ... moreWEN BP510H Spiral Blades. And, because it's a WEN product.
Buy It Now
$5.00 Shipping Condition: New Location: Chino, United States Automatic PVC Banner Welding Machine Heat Jointer Plastic Fabric Welder Hot Air Function -The quality of the LCD display is more reliable, and the temperature ... morecontrol accuracy can reach ±1℃ -DC fan, long life, uniform wind force, good force effect -High-performance switching power supply, good electromagnetic compatibility, more reliable quality -Equipped with infrared, laser positioning, stitching is more accurate Specification Voltage/frequency: 110V/60HZ Power:1800W Temperature Range: 20-680℃ Speed Scope: 0.8-8m/min Welding Thickness: 0.2-1mm Welding Width: 2-4cm Temperature Fluctuation: ±1℃ Net weight: 13kg Packing size: 48.5*28.5*28.8cm/19.09x11.22x11.34inches Applicable material : PVC material ,flex banner , advertisement material ,etc. .
Buy It Now
Free Shipping Condition: New Location: Denver, United States The G0947 Benchtop Jointer has as 8 in. The spiral-type cutterhead provides smoother finishes, quieter operation, and less maintenance compared to straight-knife ... morecutterheads. The cutting edges of the 16 high-speed steel (HSS) inserts sit perpendicular to the workpiece.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Automatic PVC Banner Welding Machine Heat Jointer Plastic Fabric Welder Hot Air Function -The quality of the LCD display is more reliable, and the temperature ... morecontrol accuracy can reach ±1℃ -DC fan, long life, uniform wind force, good force effect -High-performance switching power supply, good electromagnetic compatibility, more reliable quality -Equipped with infrared, laser positioning, stitching is more accurate Specification Voltage/frequency: 110V/60HZ Power:1800W Temperature Range: 20-680℃ Speed Scope: 0.8-8m/min Welding Thickness: 0.2-1mm Welding Width: 2-4cm Temperature Fluctuation: ±1℃ Net weight: 13kg Packing size: 48.5*28.5*28.8cm/19.09x11.22x11.34inches Applicable material : PVC material ,flex banner , advertisement material ,etc. .
Buy It Now
Free Shipping Condition: New Location: Ridgewood, United States Bevel the fence up to 45 degrees to create angled cuts along the faces of your boards. Compatible with the WEN BP510H Spiral Blades. And, because it's ... morea WEN product.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Compatible with the Powermatic PJ882 jointer. Model 1610078. Compatible with the Powermatic PJ-882HH jointer. why buy from us?. Clearance 3/4". Height ... more5-1/2".
Buy It Now
Free Shipping Condition: New Location: Ontario, United States The cutterhead is a helical design with 54 four-sided knife inserts. This design also ensures the table remains perfectly parallel, even after years of ... moreheavy use. The 2-HP motor is totally enclosed in a heavy steel stand, providing plenty of power and stability for the most demanding jobs.
Buy It Now
Free Shipping Condition: New Location: Rochester, United States Item model number JT833H. Part Number JT833H. Bevel the fence up to 45 degrees to create angled cuts along the faces of your boards. Compatible with the ... moreWEN BP510H Spiral Blades. And, because it's a WEN product.
Buy It Now
$25.00 Shipping Condition: New Location: Canada Better quality finish with no tear-out. Easy to set up. Loosen the screws, rotate 90°, tighten the inserts in minutes. The inserts can be precisely positioned ... moreby the taper hole style locking. If one edge is chipped or dull, rotate it 90° for a new sharp edge.
Buy It Now
Free Shipping Condition: New Location: Pendergrass, United States Our 2-blade cutterhead combined with the powerful 10-amp motor create up to 22,000 cuts per minute. Bevel the fence up to 45 degrees to create angled ... morecuts along the faces of your boards. Compatible with the WEN JT3062B-6 Jointer Blades.
Buy It Now
Free Shipping Condition: New Location: Walnut, United States 1 x Angle Grinder Gear. It is designed with precise gear grooves, which can be tightly connected. Due to the light and screen setting difference, the ... moreitem's color may be slightly different from the pictures.
Buy It Now
$4.95 Shipping Condition: Used Location: East Northport, United States Sears Jointer 4 3/8”, # 103-23340, (6) Special Nut Fasteners that I believe were for connecting the table Bed To the Base. Special nut bolt fastener is ... more1 1/8” in length with a 5/16” center bore hole.
Buy It Now
Free Shipping Condition: New Location: Suwanee, United States Model 1004940. 220V 5 HP Single Phase 5000 RPM 3-1/4 in. Straight Knife Industrial Planer - 1004940. Baileigh Industrial 220V 5 HP Single Phase 5000 RPM ... more3-1/4 in. Straight Knife Industrial Planer. Runs on 220V single-phase power with a 5 HP motor that turns the cutter head at a whopping 5,000 RPM.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Automatic PVC Banner Welding Machine Heat Jointer Plastic Fabric Welder Hot Air Function -The quality of the LCD display is more reliable, and the temperature ... morecontrol accuracy can reach ±1℃ -DC fan, long life, uniform wind force, good force effect -High-performance switching power supply, good electromagnetic compatibility, more reliable quality -Equipped with infrared, laser positioning, stitching is more accurate Specification Voltage/frequency: 110V/60HZ Power:1800W Temperature Range: 20-680℃ Speed Scope: 0.8-8m/min Welding Thickness: 0.2-1mm Welding Width: 2-4cm Temperature Fluctuation: ±1℃ Net weight: 13kg Packing size: 48.5*28.5*28.8cm/19.09x11.22x11.34inches Applicable material : PVC material ,flex banner , advertisement material ,etc. .
Buy It Now
Free Shipping Condition: New Location: Chino, United States Automatic PVC Banner Welding Machine Heat Jointer Plastic Fabric Welder Hot Air Function -The quality of the LCD display is more reliable, and the temperature ... morecontrol accuracy can reach ±1℃ -DC fan, long life, uniform wind force, good force effect -High-performance switching power supply, good electromagnetic compatibility, more reliable quality -Equipped with infrared, laser positioning, stitching is more accurate Specification Voltage/frequency: 110V/60HZ Power:1800W Temperature Range: 20-680℃ Speed Scope: 0.8-8m/min Welding Thickness: 0.2-1mm Welding Width: 2-4cm Temperature Fluctuation: ±1℃ Net weight: 13kg Packing size: 48.5*28.5*28.8cm/19.09x11.22x11.34inches Applicable material : PVC material ,flex banner , advertisement material ,etc. .
Buy It Now
Free Shipping Condition: New Location: Chino, United States Automatic PVC Banner Welding Machine Heat Jointer Plastic Fabric Welder Hot Air Function -The quality of the LCD display is more reliable, and the temperature ... morecontrol accuracy can reach ±1℃ -DC fan, long life, uniform wind force, good force effect -High-performance switching power supply, good electromagnetic compatibility, more reliable quality -Equipped with infrared, laser positioning, stitching is more accurate Specification Voltage/frequency: 110V/60HZ Power:1800W Temperature Range: 20-680℃ Speed Scope: 0.8-8m/min Welding Thickness: 0.2-1mm Welding Width: 2-4cm Temperature Fluctuation: ±1℃ Net weight: 13kg Packing size: 48.5*28.5*28.8cm/19.09x11.22x11.34inches Applicable material : PVC material ,flex banner , advertisement material ,etc. .
Buy It Now
Free Shipping Condition: New Location: Suwanee, United States Untitled Document Product Name: Powermatic 1610082 PJ-882HH 2 HP Parallelogram 8" Jointer w/ Helical Cutterhead Includes: POWERMATIC PJ-882HH. 8" ... moreParallelogram Jointer, 2HP 1Ph 230V, w/ Helical Cutterhead Instruction Manual Description: The 8" Parallelogram Jointer offers performance and value in a machine loaded with features. The cutterhead is a helical design with 54 four-sided knife inserts these produce a superior finish and much quieter operation than conventional cutterheads. And the inserts do not require adjustment once installed. The Jointer has an extra long 82 bed for better work support and is equipped with an innovative single handwheel design that tilts the fence in and out with positive stops at +/45 and 90 degrees. A non-mar insert in the fence contacts the table to avoid scratching the surface during adjustments. The parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also insures the table remains perfectly parallel, even after years of heavy use. The 2HP motor is totally enclosed in a heavy steel stand, providing plenty of power and stability for the most demanding jobs. Features Helical cutterhead with knife inserts provides smoother. Quieter cutting and finer finish than conventional systems Extra long 82" table for expanded work support Parallelogram design helps maintain table parallelism and eases table raising and lowering Handwheel with worm gear system for precise fence tilting(Patented) 1/8" depth of cut limiter for fast table positioning High-mount switch for operator convenience No-mar fence insert protects table Requires 350 cu.ft/min minimum dust collection Weighs 732 pounds Specifications Cutting Capacity(W x D) 8 x 1/2" Cutterhead Speed: 7000 RPM Cutterhead Diameter: 3 1/16" Number of Knives(Helical/Standard) 54 four-sided inserts Table Height: 31 5/16" Table Size(L x W) 83 x 8" Infeed Table Length: 44" Outfeed Table Length: 38&qu
Buy It Now
$80.00 Shipping Condition: New Location: Belen, United States Simply a wonderful tool for the hands-on person who wants to do his own work. Setup is accomplished in a matter of minutes on your own table. a piece ... moreof 3/4" plywood is fine. Will carve objects up to 35", with the standard length side rails, and this can be easily extended up to 7 Ft. with the construction of a simple sliding center panel of plywood (plans are included).
Buy It Now
Free Shipping Condition: Used Location: Fort Myers, United States Three knife set. Not quite sharp, very small knicks, will sharpen out fine.
Buy It Now
Free Shipping Condition: New Location: Banning, United States Brand New! One set of 3 replacement high speed steel 15" planer blades. Blades measure 15" x 1" x 1/8" International Buyers– Please ... moreNote: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Items may ship via USPS or UPS depending on what we choose Sellebrity Analytics.
Buy It Now
Free Shipping Condition: New Location: Suwanee, United States Powermatic PJ882T 230V Single Phase 8 in. Straight Knife Parallelogram Jointer with ArmorGlide. PJ882T 230V Single Phase 8 in. Straight Knife Parallelogram ... moreJointer with ArmorGlide - PM1-1610079T. Horsepower 2.
Buy It Now
Free Shipping Condition: New Location: Miami, United States Sledrunner blades can be revolved to evenly distribute wear on the blade. The tubular steel blades are mounted between cast aluminum blade holders on ... morea hardwood handle. Blade revolves to evenly distribute the wear.
Buy It Now
$3.00 Shipping Condition: Used Location: Saint Paul, United States These are the screws and parts for holding joiner deck to base. All here are in good shape. No rounded edges. Lower 48 only.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States W1879 6" Benchtop Jointer. W1879 6" Benchtop Jointer with 2-Knife Cutterhead. Are you a beginning woodworker wanting to up your skills?. This compact, ... more6" jointer fits on the smallest of workbenches, and gives you the ability to take your craft to the next level.
Buy It Now
Condition: New Location: Ellicott City, United States This 8IN Delta Professional Jointer Model 37-380 is a top-of-the-line electrical jointer that is perfect for woodworking professionals. It was never used. ... moreIt consists of two boxes - see pic. Local pick-up only, Ellicott City, MD.
Buy It Now
Free Shipping Condition: New Location: United States Single Unit. Item Length: 7. ItemWeight: 3. ItemHeight: 6. ItemWidth: 6.
Buy It Now
Free Shipping Condition: New Location: Seattle, United States These woodworking cutting tools are intended to serve as premium blade knives for your jointer machine. This HSS blades allow you to cut at higher speeds ... morewhen compared to traditional alloys. This not only improves your efficiency and workflow, but your cutting capabilities.
Buy It Now
Free Shipping Condition: New – Open box Location: Sterling, United States Harrington Tools 49 V x 3/8 Handy Jointer. If the item is opened and/or seal is broken then we will open and check to make sure all of the parts are in ... moreworking order.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Automatic PVC Banner Welding Machine Heat Jointer Plastic Fabric Welder Hot Air Function -The quality of the LCD display is more reliable, and the temperature ... morecontrol accuracy can reach ±1℃ -DC fan, long life, uniform wind force, good force effect -High-performance switching power supply, good electromagnetic compatibility, more reliable quality -Equipped with infrared, laser positioning, stitching is more accurate Specification Voltage/frequency: 110V/60HZ Power:1800W Temperature Range: 20-680℃ Speed Scope: 0.8-8m/min Welding Thickness: 0.2-1mm Welding Width: 2-4cm Temperature Fluctuation: ±1℃ Net weight: 13kg Packing size: 48.5*28.5*28.8cm/19.09x11.22x11.34inches Applicable material : PVC material ,flex banner , advertisement material ,etc. .
Buy It Now
$5.00 Shipping Condition: New Location: Chino, United States Automatic PVC Banner Welding Machine Heat Jointer Plastic Fabric Welder Hot Air Function -The quality of the LCD display is more reliable, and the temperature ... morecontrol accuracy can reach ±1℃ -DC fan, long life, uniform wind force, good force effect -High-performance switching power supply, good electromagnetic compatibility, more reliable quality -Equipped with infrared, laser positioning, stitching is more accurate Specification Voltage/frequency: 110V/60HZ Power:1800W Temperature Range: 20-680℃ Speed Scope: 0.8-8m/min Welding Thickness: 0.2-1mm Welding Width: 2-4cm Temperature Fluctuation: ±1℃ Net weight: 13kg Packing size: 48.5*28.5*28.8cm/19.09x11.22x11.34inches Applicable material : PVC material ,flex banner , advertisement material ,etc. .
Buy It Now
Free Shipping Condition: New Location: Chino, United States Function -The quality of the LCD display is more reliable, and the temperature control accuracy can reach ±1℃ -DC fan, long life, uniform wind force, ... moregood force effect -High-performance switching power supply, good electromagnetic compatibility, more reliable quality -Equipped with infrared, laser positioning, stitching is more accurate Specification Voltage/frequency: 110V/60HZ Power:1800W Temperature Range: 20-680℃ Speed Scope: 0.8-8m/min Welding Thickness: 0.2-1mm Welding Width: 2-4cm Temperature Fluctuation: ±1℃ Net weight: 13kg Packing size: 48.5*28.5*28.8cm/19.09x11.22x11.34inches Applicable material : PVC material ,flex banner , advertisement material ,etc.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 110V PVC Flex Banner Welder Automatic Hot Air Welding Machine W/ Infrared 1800W. -DC fan, long life, uniform wind force, good force effect. Welding Thickness: ... more0.2-1mm. Welding Width: 2-4cm. Item TypeBanner Welder.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States SKU 1791307. 1285 Jointer. Type of Cutterhead Helical. Helical Knife Size (L x W x T) 1.18 x. 472 x. 079 in. Motor Phase 1. Horsepower 3. Large 12" x ... more84" precision ground cast iron table surface for heavy-duty work.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Cutterhead speed: 5500 RPM. Number of cutterhead inserts: 36. Cutterhead Type Spiral. Cutterhead Diamter 3-1/16 in. Cutterhead Speed 5,500 Rpm. Jointer ... moreSize 8 in. Total table size: 9 x 76. 4 dust port with built-in dust chute.
Buy It Now
Free Shipping Condition: New Location: Grand Forks, United States This 8" Parallelogram Jointers feature extra-long infeed and outfeed tables that can be adjusted transversely and longitudinally to each other for ultra-precision ... moreface flattening and edge jointing. This version features a spiral cutterhead.
Buy It Now
Free Shipping Condition: New Location: Suwanee, United States Powermatic PJ882HHT 230V Single Phase 8 in. Helical Cutterhead Parallelogram Jointer with ArmorGlide. PJ882HHT 230V Single Phase 8 in. Helical Cutterhead ... moreParallelogram Jointer with ArmorGlide - PM1-1610082T.
Buy It Now
Free Shipping Condition: New Location: 龙华区, China The item in the actual use of the process of quality problems. We also have a high-standard team, qualified by authorized organizations to ensure products ... moreare of the highest quality. • Part of second-hand products will have obvious scratches on the surface.
Buy It Now
Free Shipping Condition: New – Open box Location: Kittanning, United States
Buy It Now
Free Shipping Condition: New Location: Chino, United States Automatic PVC Banner Welding Machine Heat Jointer Plastic Fabric Welder Hot Air Function -The quality of the LCD display is more reliable, and the temperature ... morecontrol accuracy can reach ±1℃ -DC fan, long life, uniform wind force, good force effect -High-performance switching power supply, good electromagnetic compatibility, more reliable quality -Equipped with infrared, laser positioning, stitching is more accurate Specification Voltage/frequency: 110V/60HZ Power:1800W Temperature Range: 20-680℃ Speed Scope: 0.8-8m/min Welding Thickness: 0.2-1mm Welding Width: 2-4cm Temperature Fluctuation: ±1℃ Net weight: 13kg Packing size: 48.5*28.5*28.8cm/19.09x11.22x11.34inches Applicable material : PVC material ,flex banner , advertisement material ,etc. .
Buy It Now
$20.00 Shipping Condition: New Location: Los Angeles, United States Welding Machine Automatic PVC Banner Heat Jointer Plastic Fabric Welder Hot Air Function -The quality of the LCD display is more reliable, and the temperature ... morecontrol accuracy can reach ±1℃ -DC fan, long life, uniform wind force, good force effect -High-performance switching power supply, good electromagnetic compatibility, more reliable quality -Equipped with infrared, laser positioning, stitching is more accurate Specification Voltage/frequency: 110V/60HZ Power:1800W Temperature Range: 20-680℃ Speed Scope: 0.8-8m/min Welding Thickness: 0.2-1mm Welding Width: 2-4cm Temperature Fluctuation: ±1℃ Net weight: 13kg Packing size: 48.5*28.5*28.8cm/19.09x11.22x11.34inches Applicable material : PVC material ,flex banner , advertisement material ,etc. .
Buy It Now
Free Shipping Condition: New Location: Walnut, United States 10pcs/box Apkt11t308-pm Milling Inserts High Hardness Temperature Resistance. 1 x Airbrush Coupler. It's ideal for airbrush. Plasma Cutter Guide Copper-plated ... moreSurface Not Easy to Rust Compact Circle Guide.
Buy It Now
Free Shipping Condition: New Location: United States 16800 JOINTER 5/8X1/2. ItemWeight: 0.29.
Buy It Now
$18.95 Shipping Condition: Used Location: Troy, United States Local Pick-up Available.
Buy It Now
Free Shipping Condition: New Location: Walnut, United States 1 x Angle Grinder Gear. With precise gear grooves, this gear can be tightly connected. Due to the light and screen setting difference, the item's color ... moremay be slightly different from the pictures. It is constructed of high speed steel material.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States SKU 1610084K. 60C 8" Jointer. Handwheel operated worm gear system for smooth fence tilting. Volts 230V. Motor Phase 1. Horsepower 2. High mount switch ... morefor operator convenience. Cuts pre Minute 21000.
Buy It Now
$10.00 Shipping Condition: New – Open box Location: Barstow, United States Hitachi 998862 60-Teeth Tungsten Carbide Tipped 8-1/2-Inch ATB 5/8-Inch Arbor Finish Saw Blade Features Cuts through all types of wood Tungsten carbide ... moretipped teeth(60) Made especially for Hitachi C8FB-2 8-1/2-Inch blade Comes with a 30-day limited warranty 8-1/2-inch ATB saw blade with 60-teeth. 5/8-inch arbor and a.087-inch kerf width Delivers smooth rapid cuts Ideal for cross-cutting all woods with a clean. Ultra-fine finish Tungsten carbide tipped teeth withstand years of repeated use and outlasts traditional blades Details Brand: Hitachi Item Dimensions Height: 11.40 inches Length: 0.00 inches Width: 10.00 inches Manufacturer: Hitachi Model: 998862 Number of items: 1 Package quantity: 1 Part number: 998862 Publisher: Hitachi One-day Shipping service option includes 1-business day handling If you buy the item today we will ship it tomorrow using One-day Shipping service Shipping Terms: Your order will be processed within 3 to 5 business day after receipt of cleared payment. Transit time 2-5 business day. Orders are not processed for shipments on Weekends or Holidays We Only Provide Shipping to the 48 Contiguous United States(No international) We will automatically email you with tracking within 24 Hours of processing and shipping your order We are unable to ship: Alaska. Hawaii, Puerto Rico, America Samoa, Virgin Islands, PO Box, APO/FPO and Military Addresses We do not combine shipping We only ship to the address supplied to us by eBay/PayPal(No Exceptions) We do not ship Internationally Including Canada Payments: We Accept Payments Via PayPal Only Immediate Payment is required Sales Conditions: 14 days in order to get your money back or item exchange* Buyer pays return shipping Buyers Pay for Return Shipping Cost. Except Defective Items 20% restocking fee will apply on all new items that have been opened and returned(except defective) Do not return the item before contacting us. Any return HAVE to include a return authorization number provided for us. After you report any problem wait for our answer I
Buy It Now
Free Shipping Condition: New Location: City of Industry, United States 1 x Angle Grinder Gear. It is designed with precise gear grooves, which can be tightly connected. It is constructed of high speed steel material. We will ... moretry our best to reduce the risk of the custom duties.
Buy It Now
$189.00 Shipping Condition: New Location: Wayland, United States This design also insures the table remains perfectly parallel, even after years of heavy use. The 2HP motor is totally enclosed in a heavy steel stand, ... moreproviding plenty of power and stability for the most demanding jobs.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States The G9953ZX features a 6-row spiral, indexable-insert cutterhead. The complete and easy-to-read manual provides full instructions on how to assemble and ... moremaintain your jointer. Cutterhead type: 6-Row spiral with 120 inserts.
Buy It Now
$6.95 Shipping Condition: New – Open box Location: Kittanning, United States 3 new knives well made in USA by wapakoneta machine co, b38224 big chief.
Buy It Now
$6.95 Shipping Condition: New – Open box Location: Kittanning, United States 3 new knives well made in USA.
Buy It Now
Free Shipping Condition: New – Open box Location: Enfield, United States Self Centering Doweling Jig Wood Dowel Tool Clamp Drilling 1/4" - 3/8" 19625.
Buy It Now
Free Shipping Condition: New Location: Walnut, United States It's ideal for airbrush. 1 x Airbrush Coupler. Plasma Cutter Guide Copper-plated Surface Not Easy to Rust Compact Circle Guide. Clothing, Shoes & Accessories ... more|. Dust Collector Large Capacity Keep Clean Dust Cover Power Tools Parts Compact.
Buy It Now
Free Shipping Condition: New Location: Vista, United States Big Horn 19625 Doweling Jig. Model: 19625. Big Horn 19625 Doweling Jig. Includes 6 bushings 2 each of 1/4", 5/16" and 3/8". If an identical item is unavailable, ... morewe reserve the right to substitute an item of equal or greater value at our discretion.
Buy It Now
Free Shipping Condition: New Location: Suwanee, United States Model 1610086K. 60HH 8 in. Jointer with Helical Head - 1610086K. Powermatic 230V 1-Phase 2-Horsepower 8 in. Jointer with Helical Head. Helical cutterhead ... morewith four-sided inserts provides smoother, quieter cutting and a superior finish.
Buy It Now
$6.95 Shipping Condition: New – Open box Location: Kittanning, United States 3 new knives well made in USA by wapakoneta machine co, b38224 big chief.
Buy It Now
Free Shipping Condition: New Location: Suwanee, United States Model 715155. 230V 15 Amp 3 HP JPJ-12BHH 12" Helical Head Planer / Jointer - 715155. JET 230V 15 Amp 3 HP JPJ-12BHH 12 in. Corded Electric Helical Head ... morePlaner / Jointer. Cutterhead Style Helical. Horsepower 3.
Buy It Now
$10.16 Shipping Condition: New Location: Wayland, United States 8-1/16" x 11/16" x 1/8", HSS Blades for 60, 60A, 60B, PJ882, Set of 3. Width 0.0000. Weight 1.0000. Length 0.0000. Height 0.0000.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Automatic PVC Banner Welding Machine Heat Jointer Plastic Fabric Welder Hot Air Function -The quality of the LCD display is more reliable, and the temperature ... morecontrol accuracy can reach ±1℃ -DC fan, long life, uniform wind force, good force effect -High-performance switching power supply, good electromagnetic compatibility, more reliable quality -Equipped with infrared, laser positioning, stitching is more accurate Specification Voltage/frequency: 110V/60HZ Power:1800W Temperature Range: 20-680℃ Speed Scope: 0.8-8m/min Welding Thickness: 0.2-1mm Welding Width: 2-4cm Temperature Fluctuation: ±1℃ Net weight: 13kg Packing size: 48.5*28.5*28.8cm/19.09x11.22x11.34inches Applicable material : PVC material ,flex banner , advertisement material ,etc. .
Buy It Now
Free Shipping Condition: New Location: La Puente, United States Automatic PVC Banner Welding Machine Heat Jointer Plastic Fabric Welder Hot Air Function -The quality of the LCD display is more reliable, and the temperature ... morecontrol accuracy can reach ±1℃ -DC fan, long life, uniform wind force, good force effect -High-performance switching power supply, good electromagnetic compatibility, more reliable quality -Equipped with infrared, laser positioning, stitching is more accurate Specification Voltage/frequency: 110V/60HZ Power:1800W Temperature Range: 20-680℃ Speed Scope: 0.8-8m/min Welding Thickness: 0.2-1mm Welding Width: 2-4cm Temperature Fluctuation: ±1℃ Net weight: 13kg Packing size: 48.5*28.5*28.8cm/19.09x11.22x11.34inches Applicable material : PVC material ,flex banner , advertisement material ,etc. .
|
|
|
|
Craftsman 103.20620 6 1/8” Jointer Cutter Guard Assembly
Craftsman 103.20620 6 1/8” Jointer Cutter Guard Assembly Vintage(1960? Craftsman Jointer cutter guard and spring Good used condition Photos are a key part of the item condition description. Please ask any questions before bidding From smoke free environment 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-14830f18567-0xe9-
|
|
|
Craftsman 1/8 jointer/ planer 2.5 hp
Sears jointer planner.works great needs some cleaning
|
|
|
Craftsman 103.20620 6 1/8”Jointer Scales Indicator Nameplate
Craftsman 103.20620 6 1/8”Jointer Scales Indicator Nameplate Vintage(1960? Craftsman Jointer indicators. Scale, and name plate components Good used condition Photos are a key part of the item condition description. Please ask any questions before bidding From smoke free environment
|
|
|
Sears Craftsman 4 1/8" Benchtop Jointer Planer Model No. 149.236221
Sears Craftsman 4 1/8" Benchtop Jointer Planer Model No. 149.236221 Up for sale is a Sears Craftsman 4 1/8" Benchtop Jointer Planer Model No. 149.236221. This tool is used but fully functional. There are no nicks in the blade. Motor runs superbly. Power cord insulation is undamaged. Safety guard on tool is functional. Includes owner's manual. See photos for condition specifics. Questions please ask. Payment is expected within 48 hours of auction/sale end. Same day payment always results in positive feedback for the buyer. Non payment will result in disciplinary action from eBay. It should also be noted that we only ship to the addresses linked to buyers' Paypal accounts. Always Use Safety Equipment including eye protection. Always understand tool operation and never operate in a dangerous manner. We take no responsibility ... moreor liability for injury resulting from the use or misuse of this tool. Internal Use Only- HG1_gsrx_vers_568(GS 6.7.3(568)
|
|
|
McCormick/Farmall #8 Plow - Rare Colter Jointer Attachment, Disc Type
Offered are three disc colter-jointers which are used on several International Harvester plows as well as the McCormick Genus#8. These colter-jointers bolt onto the standards that holds the regular colter on the plow. The three colter-jointers and finger clamps have been sandblasted and painted. The blades show some signs of use. Please ask questions. The items are heavy and are listed as local pickup. Some other options may be available. This option was available around the mid 1950's and later. I have installation instruction which I will provide to the buyer.
|
|
|
Tested & Working Sears 4 1/8" Benchtop Jointer Planer Model No.149.21871
No reserve on almost all of my auctions(Buy It Now Excluded Of Course) and they start at just.99 Cents! You are buying or bidding on a Tested& Working Sears 4 1/8" Benchtop Jointer Planer Model No.149.21871. This Benchtop Jointer has normal signs of wear from use and storage. Please use the pictures to judge the condition for yourself. Every piece will be packed with extreme care that is sold on here and shipped out in one business day after payment is received(So a business day will Exclude Weekends) Keep an eye on my auctions that start at just.99 cents with no reserves for some great deals. Good Luck& happy Bidding! Please message me with all questions as there will only be a 14 day window for refunds once the item has been delivered. This will of course only be for broken or damaged items and not for simply not liking the ... moreCd. Game or DVD. I try to sell honestly to the best of my ability with good detail to prevent any frustration on your end so you will get what I say and not something else and please feel free to check my feedback rating for verification on that as well. The item you see pictured is the one you will receive or a stock picture of the Cd cover. $19.99 for shipping in the United States(All Cd's will be shipped in a bubble mailer unless there are more then 6 bought in the same order and then it will be boxed) There will be free insurance included on anything glass that I sell or anything that sells for more then one hundred dollars. We do combine shipments on these and any of my items. The first or highest shipment cost is the full stated cost and anything won after that item is half the stated shipment cost as long as it is all paid for in the same shipment and not days apart from each other as we ship daily. PayPal only unless you contact me first and you are told that you can do otherwise. Sorry no checks. On Dec-15-12 at 19:35:09 PST. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
|
|
|
Bridgewood BW-8J 8" Jointer Used
Bridgewood BW-8J 8" Jointer Used Sorry. This photo gallery requires that the Adobe Flash Player be installed. Used Bridgewood BW-8J 8" Jointer in very good condition. Fully functional. All cast iron machine. Surface ground. 9" x 67" table top. Four-knife, 4500 RPM cutterhead. Center-mounted 4" x 38" fence. 8" cutting width, ½" cutting depth. 110-220V 1.5HP, single phase motor. Free Local Pickup Only. All international buyers. Please include a phone number with your shipping information. This greatly facilitates the shipping process. PLEASE NOTE- CUSTOMS FEES, IMPORT TAXES, VAT, CUSTOM CLEARANCE FEES are not collected by the seller. International buyers are responsible for paying customs taxes to their own country's custom's officials. Please write with any questions about shipping charges ... moreor customs fees. In the case of a return, buyers must request a refund of customs fees/clearance fees from their own country. We do not cover this expense. Paypal or OTHER. Thank you for your cooperation. Payment is expected within THREE days of the end of the auction listing. COMBINED SHIPPING: We can combine shipping on a maximum of five items which close within a four-day period. Please contact us to let us know if you will be purchasing more than one item. Payment for all items is expected by the seventh day if multiple items are purchased. International Buyers: Please do not ask that we ship your item with a reduced declared value in order to avoid VAT or customs fees in your country. Also. Please do not ask that we ship your item as a GIFT. We are not able to do this due to both legal and ethical reasons. All international purchases will be shipped with the correct customs information. All international purchases will have two copies of the sales invoice, as required by both US Trade regulations and international customs. This is the best practice to ensure that your item reaches you safely and without any extra delays. If you do not wish to have your item shipped with i
|
|
|
Woodstock Knives Set for W1741 Shop Fox Jointer - 8" - 4-Pack
Time.zone.now.to_s- Ebay Template Search Click to Enlarge. Make: Unknown, Model: Knives Set, UPC: 769433436342, Fully Functional, Minor signs of use(scratches. Dents, etc) Includes 90-day warranty MSRP $50.00 SAVE 41% $29.59 LIMITED QTY- ONLY 1 LEFT! Features Fit W1741 Shop Fox Jointer, Measure 8 by 3/4 by 1/8-Inch, Made from high speed steel, Includes four knives, Specs Item Weight: 12 ounces, Product Dimensions: 10.6 x 1.1 x 0.4 inches, Item model number: D3634, Size: 8-Inch, Material: High Speed Steel, Item Package Quantity: 1, Q: What Is Your Return Policy? A: BLINQ offers a 30-Day Money-Back Guarantee on all items. If you have an issue. Just contact us and we'll make it right. Q: Do I Need To Contact You Before Returning An Item? A: Yes. You must contact us for an RMA(Return Merchandise Authorization) before returning any item. Items ... morereturned without RMA will be refused and no refund issued. Q: How Does Return Shipping Work? A: Return shipping is FREE for all returns. We include a pre-paid FedEx Return Label as part of the RMA email(US Only) Q: What Are The Warranty Details? A: BLINQ stands behind every product we sell. We offer a 90 day warranty for all items. Except brand new sealed, which comes with a year warranty. Please for a free copy of the written warranty. Q: What Payment Methods Do You Accept? A: For eBay listings we accept PayPal checkout. Which accepts all major credit cards. Q: Are your prices negotiable? Do you offer bulk discounts? A: No. Our prices are already heavily discounted and not subject to negotiation. For 20+ item orders. Please contact us for bulk pricing. Q: What is BLINQs Best Price Guarantee? A: When you shop at BLINQ. Youll find the best prices on your favorite brands. We guarantee it! When you buy a product from BLINQ.com and find the same item on our site or one of our competitors websites listed for a lower price, just let us know within 24 hours of purchase and well refund the difference to your original method of payment. We match the pre-tax price for new a
|
|
|
Craftsman No. 21866 4 1/8" Jointer Knives - One Set of 3 Knives New Old Stock
Craftsman No. 21866 4 1/8" Jointer Knives- One Set of 3 Knives New Old Stock Description: Craftsman No. 21866 4 1/8" Jointer Knives- One Set of 3 Knives New Old Stock This is a set of new old stock Craftsman 4 1/8" Jointer Knives. They are in the original packaging. This is the last set. It's in excellent condition. Please see the pictures for details. We accept PayPal. Item to be shipped via USPS. Check out my other items!
|
|
|
JET 8" LONG BED JOINTER
JET 8" JOINTER JJ-8 Item Description: Nice JET 2hp 8" long bed jointer in perfect working condition. Model JJ-8. Has some minor paint wear consistant with age.Heavy machine. Prefer local pick up. Condition: No issues. Note: Local pickup or arrange your preferred freight agent. WARRANTY: The item is being offered as-is. Guaranteed to be as pictured and as described· No additional time warranty. Usage period warranty, or any other guarantees are being offered, expressed or implied. If item is not as described/ pictured in the listing at delivery or pick-up. Customer is entitled to full refund of the purchase price minus any applicable shipping charges. If shipped back the item must be securely repackaged and back within 7 days from delivery in order to receive the refund. If picked up at our location, no returns will be accepted; ... morethe buyer is responsible for inspecting/testing of item meets description. The item description and specification are obtained to the best of my knowledge from available manufacturer and other public information and are provided for reference only. Bidders are responsible for researching the item so that it meets his/her expectations prior to bidding. Asking questions prior to bidding is highly encouraged. Customer satisfaction is my number one priority. Please contact us if there is an issue w/ the item you have received. I will do my best to correct any problems that may arise. PAYMENT: We accept ebay approved payments: PayPal(instant transfer. E-checks, credit cards) Cash. Sales Tax of 8.0% of purchase price applies to all purchases made by New York residents. Direct quote from ebay policy: Your bid is a contract– Please bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item from the seller. You should contact the seller to resolve any questions before bidding” The item/s must be paid for within 7 days of auction end. If this is an issue please email pr
|
|
|
Sears CRAFTSMAN 3/4 HP 4 1/8" JOINTER PLANER
Sears CRAFTSMAN 3/4 HP 4 1/8" JOINTER PLANER Up for auction this week is a slightly used Sears CRAFTSMAN 3/4 HP 4 1/8" JOINTER PLANER. It was found in the store room of a old woodworking shop in a box that said"save for my grandson" I heard a fellow friend talking. The owner purchased the item to use and it was too small for the projects he was building so he put it way for the grandson. Look at the picture of the inspected by tag, this comes off the first time you blow it off after use. This shop was part of an estate sale. At the estate sale was the grandson who is now a doctor and not interested in getting dirty or dusty from wood chips. His loss is your gain. What's in this auction? 1- CRAFTSMAN 3/4 HP 4 1/8" JOINTER PLANER Model 315-23720 2- Push Blocks Customer Service Promise. I want you to be happy with ... moreyour purchase so PLEASE don’t hesitate to ask questions. I realize how important“feedback” is in developing an eBay business. I will try my very best to provide you with excellent service. If there is anything that you are not happy about. Please contact me before leaving less than positive feedback. My goal is to make every transaction a five star excellent experience. I will always leave feedback upon receipt of your feedback and then I will know you have received your item. Buyer's Info: 1. We are only sellers of the items. We are not the original owners of the items. 2. We are not experts on any of the items we sell. We can only tell you what we were told or see about the items for sale. 3. Please ask all questions before you bid. I will answer all questions. 4. There are no extra parts included that I do not specify in the description. 5.You will receive exactly what is described and in the pictures. I do not use stock pictures. If you do not. We have a problem and I need to know about it ASAP. Item Storage: I am sorry for the inconvenience but most of our inventory is stored at a different location. All items are packed and ready for shipment. You say so what? Well wh
|
|
|
CAST IRON BASE FROM VINTAGE 8" DELTA POTBELLY JOINTER, ROCKWELL, MILWAUKEE
This auction is for the cast iron base assembly for a vintage 8" Delta. Crescent, Rockwell, Milwaukee jointer. The base is intact with no cracks or breaks. a few extra holes on the switch side which are easily patched, otherwise pristine. You get the 4 base side pieces, plus the top pulley cover and potbelly pieces, the motor mount assembly and all hardware. The 4 knurled nuts for the back are here but they have plier marks. You do NOT get the jointer. Motor or switch. It would be great if you picked this up at zip 50458. But I am prepared to ship it to you. It will take me 10 days to prepare and will ship in two large, heavy boxes, It costs what ever the shipping calculator says- it is what it is In the 10 years I have been watching. I have seen only 3 of these 8 inch potbelly bases only sell on eBay, and they all were pick up only. ... morePLEASE LOOK AT ALL THE PHOTOS. THEY ARE THE PRIMARY DESCRIPTION AND SUPERCEDE ANY WRITTEN NARRATIVE. I often include dimensions in the photos so please look at all the photos before asking the dimensions of the item. I ALWAYS COMBINE SHIPPING FOR MULTIPLE PURCHASES. So look at my other items and ask me to send a combined invoice before you pay. TERMS and CONDITIONS– Please read all this below because this language governs the terms and conditions of this sale. By bidding on my auction you agree to the following terms: QUESTIONS– please ask any questions you have BEFORE you bid. DO NOT SEND ME YOUR PHONE NUMBER- I do all business by email so there is a record of what was asked and answered. You should assume that I will post your question and my answer in the question forum. PAYMENT TERMS- If you are the winning bidder I need to hear from you within three days and have payment in hand within seven days. PAYPAL ONLY. AUCTIONS SHIPPING TO IOWA ADDRESSES WILL BE CHARGED 6% STATE SALES TAX. REFUND POLICY– You may return the item for any reason within seven days of receipt and I will refund the purchase price no questions asked. But I will not refund the return shipping charges. Re
|
|
|
P0WERMATIC 8 INCH JOINTER with BYRD CUTTER HEAD - Model 60
POWERMATIC 8 INCH JOINTER. 1983 MODEL 60. BYRD CUTTER HEAD. SINGLE PHASE 2 HORSEPOWER TEFC MOTOR. RUNS GREAT. I HAVE USED THIS MACHINE AND IT RUNS GOOD BUT I NEED ROOM IN MY SMALL HOBBY SHOP. The Byrd Cutter Head makes this jointer stand out. Made at Powermatic Houdaille Industries. Inc in McMinnville, TN. Serial# 8361561. This is heavy equipment and should be picked up on location in Cypress, TX. It can be shipped but there will be extra charge for crate and shipping expense. I have equipment that I can use to help load it onto your truck or trailer. Please email any questions. It can be plugged in and tried on site before moving it.
|
|
|
Powermatic 60 8” Jointer, 2HP 3PH 230V - 1610040 (72")
Reserve has been lifted! Powermatic 161004. Model 60 Heavy Duty 72"x8" jointer 2HP 3PH motor 230V Table is 72" long Manual switch and stand We purchased this powermatic jointer new in 1998 this is a very nice machine and works great. Please let me know if you have any additional questions. Item is available for local pick up. Please contact me for a shipping price. This item is sold as is we are also selling this item locally and reserve the right to end auction at anytime before auction ends if sold locally Thanks And happy bidding
|
|
|
Porter Cable Deluxe Plate Jointer 557 7.5 amp 3 3/8"
Porter Cable Deluxe Plate Joiner Model 557 7.5 amp 3 and 3/8" with manual. Blade, dust bag, and case. Occasionally used by home hobbyist woodworker. Currently for sale at Home Depot for $199.99. Thanks for looking!
|
|
|
FREUD PLANER / JOINTER KNIVES HPS 15 X1 X 1/8 IN.
SHARPENED PROFESSIONALLY AT LEAST ONCE. IN EXC CONDITION, SOLD AS IS!
|
|
|
INCA Planer Roller Head Attachment for INCA 8” Jointer, Used.
INCA Planer Roller Head Attachment for INCA 8” Jointer. Used: This Planer roller attachment fits over the jointer cutting head and clamps to the bed. This provides a height adjusted set of rollers to manually feed stock through for planning. It is made of cast aluminum and has a plastic adjusting knob for height adjustment. It appears to be complete and in very good condition. The clear plastic cover of the height adjustment indicator is broken. This INCA attachment is sold with the Kent’s Tools 30 Day Satisfaction Guarantee. For more eBay items visit:
|
|
|
Sears/Craftsman 6 1/8" Bench Top Jointer-Planer
Item is in Very Good Condition- Manual and Extra Blades Included SPECIFICATIONS: Drive: Multi-V belt Motor: 1.5 HP 10.000 RPM, 9.4 AMPS@ 120 VAC, 60Hz Size: 24"L x 4 5/8"H Adjustments: 0-45 degrees Cutterhead: Permanently lubricated ball bearings. Safety stop Fence: steel. Center mount single action tilt adjustment; transverse adjustment across full width of table Infeed: 14 3/8"L x 6 3/8"W Outfeed: 14 3/8"L x 6 3/8"W Adjustment: Infeed Table. 0" to 1/8" cut depth Accessories: 2.5" to 1.25" vacuum adapter. 2) hold-down/push blocks Weight: 53 pounds
|
|
|
MAGNA-SET JOINER / JOINTER PLANER MAGNETIC KNIFE SETTING JIG FOR 4" TO 8" KNIVES
MAGNA-SET JOINER/ JOINTER PLANER MAGNETIC KNIFE SETTING JIG FOR 4" TO 8" KNIVES Description Magna-Set Jointer Magnetic Knife Setting Jig For 4" To 8" Knives Magna-Set Jointer Knife Adjustment Jig For 4" To 8" Jointers. Condition is excellent used and comes in factory box. Micro adjustable to 0.001-Inch. For both steel and carbide knives. Set up jointer or planer knives quickly and accurately. Keep fingers safe from razor sharp cutter knives. Please email any questions.Sold with 14 day return policy. Free Secure Shipping to USA(Lower 48) and Canada. Payment and Shipping Payment required 3 days after auction end. Free to US(Lower 48) and Canada.Shipped within 3 day after payment. Click Photos to Enlarge inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
18 inchpowermatic planer, delta unisaw, 8 inch rockwell jointer, grizzly dust co
powermatic 180 planer 7.5 ho Rockwell unisaw 5 hp Grizzly Dust collector rockwell 8 inch jointer mdl 37-315 Rockwell radial arm saw 4 foot by 8 foot work table- goes with table saw Everything is clean. Runs as it should, and nice. Your welcome to look and run tools. Asking 4.000 for everything. All items are single phase
|
|
|
CRAFTSMAN KNIFE SETTING GAUGE WITH THREE 6 1/8" JOINTER BLADES
These are used with some wear and tarnishing. Pictures show better than I can describe. There is Craftsman Knife Setting Gauge and 3 Craftsman 6 1/8 blades and pictures show justg what is available. Any questions please e-mail. US ONLY. US ONLY AND WON'T SHIP INTERNATIONAL, INTERNATIONAL BIDS WON'T BE HONORED, NO EXCEPTIONS. Paypal only. Priority mail 8.00 to 12.35 depending where you live and combine to save on shipping. Insurance optional, but not responsible if not insured. Will refund if not as described.
|
|
|
~Clean Working STANLEY - BAILEY NO. 7 Wood Jointer Plane Type 8 (1899 - 1902)~
This is a very nice early Stanley- Bailey No. 7 Jointer Plane Type 8- 1899- 1902) Appears to be all original One Patent date on Lateral Adjuster 7-24-88 B Casting on back or lever cap Plane is in excellent working condition. Some discoloring on side of bed. Tote is solid but has numbers carved on side. Please review condition and pictures. If you have any questions. Please email me. Thanks for looking. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Delta Rockwell 5" OD 5/8" ID Pulley Cat No. 5500 Band Scroll Table Saw Jointer
PULLEY FOR VINTAGE DELTA ROCKWELL TOOLS. CAT. PART NUMBER 5500 5" OUTSIDE DIA. WITH A 5/8" KEYED BORE. PULLEY IS IN EXCELLENT CONDITION AND COMES WITH KEYWAY AND SET SCREW.
|
|
|
Bridgewood 8" Jointer BW8J
Excellent condition! 8" jointer, Bed: 9"x67" Fence: 3-7/8 in. x 38-1/4 in. Motor: 1 1/2 hp, Includes extra blades,
|
|
|
VINTAGE DELTA ROCKWELL 3450 MOTOR, 3/4 HP, SAW, JOINTER, SANDER, EXCELLENT, 5/8
Here is a great factory-issue motor off a barely-used combination machine. Works great. This is a scarce one. The 3450 RPM with the high power upgrade. These are usually 1/2 HP with 1/2 shafts, this one is 3/4 HP with 5/8" double shaft. Guaranteed. PLEASE LOOK AT ALL THE PHOTOS. THEY ARE THE PRIMARY DESCRIPTION AND SUPERCEDE ANY WRITTEN NARRATIVE. I often include dimensions in the photos so please look at all the photos before asking the dimensions of the item. I ALWAYS COMBINE SHIPPING FOR MULTIPLE PURCHASES. So look at my other items and ask me to send a combined invoice before you pay. TERMS and CONDITIONS– Please read all this below because this language governs the terms and conditions of this sale. By bidding on my auction you agree to the following terms: QUESTIONS– please ask any questions you have BEFORE you bid. DO NOT SEND ... moreME YOUR PHONE NUMBER- I do all business by email so there is a record of what was asked and answered. You should assume that I will post your question and my answer in the question forum. PAYMENT TERMS- If you are the winning bidder I need to hear from you within three days and have payment in hand within seven days. PAYPAL ONLY. AUCTIONS SHIPPING TO IOWA ADDRESSES WILL BE CHARGED 6% STATE SALES TAX. REFUND POLICY– You may return the item for any reason within seven days of receipt and I will refund the purchase price no questions asked. But I will not refund the return shipping charges. Returned items must be in“as-sold” condition, any repairs or modifications void the refund offer. I do not give partial refunds– do not tell me you want to keep the item but don’t think it was worth what you paid. Just return the item and I will refund your money. SHIPPING COST– I ship by USPS Priority Mail or UPS only. The shipping calculator shows what you will be charged for shipping in the US. Please do not ask me to ship by bus or parcel post because those shipments cannot be properly tracked. INTERNATIONAL SHIPPING- I will ship internationally. But only through eBay’s forwarding serv
|
|
|
Vintage Stanley No 8 jointer plane, VGC, 1925-28, Rosewood handles
Vintage Stanley No 8 jointer plane. VGC, 1925-28, Rosewood handles This is the Stanley No 8 jointer plane. This is the largest they made, went out of production in 1961 This example actually dates to 1925-28 so it has all the same features as the last ones they made in'61. The blade is a replacement new Record one, honed ready for use 24" long. 2 5/8 wide blade, the blade is wider than all the smaller planes. Both rosewood handles are in good condition. Rear handle has been repaired at some time. Ask for a courier price if not shown. Italy £22 We sell a lot of bench planes. Block planes, rebate& router planes etc. All are stripped. Cleaned and examined for cracks etc. The horrible original crackly varnish is almost always removed and the handles refinished. All are oiled and reassembled with professionally reground and honed ... moreblades. Bodies are repainted if needed whilst stripped down. Payment to be received within 7 days. Unless you request us to hold the item for you. If you would like us to hold the item more than 7 days we would prefer you to pay(without postage) PLEASE DO NOT ASK FOR THE CORRECT POSTAGE. The correct postage is shown automatically on your screen depending upon where you are. We always combine lots for the cheapest postage, if you win more than one lot, it will normally be reassessed and invoiced on Monday. Items are posted within 2 working days of payment. On 05-Oct-14 at 06:25:23 BST. Seller added the following information:
|
|
|
Vintage Sears Craftsman 4-1/8" Jointer Planer Benchtop Model 149.236221
Description: This Craftsman 4-1/8” Joiner Planer is model no. 149.236223. This planer is a benchtop model that has a 5/8 HP motor capable of producing 16.000 cuts/min. It has a max depth cut of 1/8” and the fence tilts 45 degrees in and out. It is clean and in good working condition. The only noticeable flaw is the rust that that has began to develop on this planer from it not being using. This rust is mostly on the backside of the planer and it should not be that difficult to clean up if you choose to do so. The good news is that the cutter knifes are sharp and rust-free. I have taken the rust on the base into consideration and priced this one to sell fast so don’t miss out on this deal! 0 0 1 102 584 Towson University 4 1 685 14.0 Normal 0 false false false EN-US JA X-NONE Shipping: All shipping will be done within 1-2 business days of ... morethe auction ending via USPS safely and securely with Delivery Confirmation. If you ever question my integrity. Check my feedback! 100% Positive Feedback= 100% Guaranteed Authenticity& Satisfaction on ALL of my Items Please feel free to contact me with any questions/concerns and God Bless Return Policy: It is my goal to provide all of my customers a pleasurable experience with the utmost professionalism. I do my best to describe all of my items as accurately as possible. If you feel that I wrongly described an item or made a mistake. Please contact me before leaving feedback. I will offer a refund up to 14 days after receiving the item. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14902f91255-0x10f-
|
|
|
Craftman 6 1/8 jointer/planer knives set of two 22994 *BRAND NEW IN PACKAGE*
I am selling a Craftsman 6 1/8 long set of two jointer/planer knives. The model number is 22994 and it is brand new unused in the original packaging. I am selling the knife set with no reserve and at a low starting price. Thanks for your interest.Happy biddng
|
|
|
Rockwell Delta 8" jointer base casting
good condition. This is not broken. switch side. Parting out machine. Let me your what you need and I will list. will ship for exact cost. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-1490a8f9ece-0x108-
|
|
|
Yates American Table Extension Set For 8" Table Saw/4"Jointer/Disc Sander Combo
Hard to find original Yates American 8" table saw combination machine extension set. All cast iron. And in very good condition.
|
|
|
Vintage Delta Rockwell 6" Jointer 2" x 5/8" Bore Cutter Head Pulley
Vintage Delta Rockwell 6" Jointer 2" x 5/8" Bore Cutter Head Pulley In nice used condition. But does show some signs of use. Please view all the photos carefully before bidding. Thank you!
|
|
|
Vintage Sears 103.21041 Jointer 4" table saw side mount SImpsons 8" saw COMPLETE
This is a vintage Sears Simpsons side mount Jointer from a 8" Table Saw and Jointer combo model# 103.21041. Its 20" long and 6" wide with a 4" cutter head. Its in great working condition and is complete and ready to use. Please see all 12 photos. I have other parts from this table saw jointer listed so please see my other auctions.Please email me if you have any questions. Shipping will be $20. Thanks and good luck.
|
|
|
Stanley No 8 Jointer Plane, Type 4, 1874-1884
This is a Stanley No 8 jointer plane. It is a type 4 that dates to between 1874 and 1884. The plane is in good and has been repainted. There are several ares of minor pitting on both shoulders and the sole. The knob is very good with no cracks or repairs. The tote has a repaired horn. There are no seized. Missing, broken or other repaired parts.The cutter has a new edge but modest pitting remains. The plane produced the shavings shown. The plane is a great display. It is fully functional and if you choose. It is shop ready when received. This plane is a very good use. The auction will be shipped to your Pay Pal address. Use the calculator for S&H in the US. Somewhat higher elsewhere(This will weigh about 9 lbs, packed. Out of country folks should advise their address for an accurate shipping charge. My experience shipping to Canada is, ... moreif I can get the auction in a padded envelope, the charge is about the same as shipping in the US. However, if it must go in a carton or box, charges go up and have to be recalculated for your postal code. When the shipping weight exceeds 4lbs, all out of country shipments must go by Priority air mail. Regular mail rates(1st Class mail) no longer apply, and can’t be used. As an added service for Canadian bidders. I can now ship any auction that exceeds 4lbs, totally within Canada Poste. There may be a day or two, delay in shipping, as this involves a road trip for me. However, the shipping expense will be reduced to about half what it would be, originating in the US. Please email me, with your postal code, to clarify what you might expect. Multiple auctions to the same address will reduce the S&H. If you make a multiple purchase that involves a“Buy it Now’ item. You will have to pay the entire price that includes a S&H figure. I will credit back any excess charges on the entire purchase. Paypal is preferred. But you may use any of the Ebay mandated payment methods. Out of country folks are always welcome, but must use paypal. A further note for International Buyers: Imp
|
|
|
Delta DJ 20 8 inch wood jointer
This unit is in excellent condition. It has minor pitting on the tables, Motor is 230Vac. 60 Hz, single phase. 1-1/2 HP, Total table length is 88 inches, Max depth of cut is 5/8" With 5/8 x 5/8 rabbet, New in 1999. Unit has been used less than 100 hrs, No missing parts except the dust collector nozzle. Blades may need sharpening. Manual can be downloaded from Delta at no charge To see the manual ask for Model 37-350. Type 2 Delta 50-276 Mobile Base is included, Replacement cost is over $2500.00,
|
|
|
DELTA DJ-20 8" Jointer W/ Starter, 1Phase, 220v + Mobile Base
GREAT MACHINE.RUNS GREAT. AS YOU SEE IN THE PICTURES EXTRA SET OF BLADES MAKE YOUR MOVE. READY TO ROCK AND ROLL AND MAKE YOU SOME MONEY.
|
|
|
DELTA ROCWELL 8" JOINTER
ROCKWELL/DELTA 8" JOINTER 8" WIDE BLADES TABLE LENGTH 66" BELT DRIVEN- CONVERTED TO 120 V BLADES ARE CHIPPED THIS UNIT IS FROM THE 60'S*PLEASE NOTE* THIS ITEM IS SOLD AS IS AND IS FOR LOCAL PICK-UP ONLY! PICK-UP WILL BE BETWEEN THE HOURS OF 7:30AM- 2:30PM MONDAY- FRIDAY NO EXCEPTIONS!
|
|
|
Craftsman 6 1/8" Jointer Set of 3 Blades / Wedge / & Cap Screws / OO 314
Hello Folks. These have been removed from a used tool. I see No damages, included are: 6 cap screws, 3 cutter knives, and 3 cutter wedges. Please see all pics. Please check out our Ebay store for other great bargains. As always. Please don't hesitate to email us with your questions. Please know that if you have not emailed us, and your payment has not been made in seven days of purchase then we do turn over the unpaid item to Ebay for collection and to recoup our Ebay fees. Thank you for your understanding in this matter.
|
|
|
2013 Grizzly 8" x 76" Jointer Model G0490
Item Specs: 8" x 76" Jointer, Model G0490, New in 2013, Used for one cabinet job, Located in CT, You will receive an invoice via email or Ebay for the full amount owed. Including shipping. Please do not pay until you have received the invoice. Items not paid within 10 days from the end of an auction will be relisted. Payments by check will be held up to 4 days until the check clears. We can ship by LTL. Partial or full, van or flatbed, double drop, or export container. Freight costs are to be quoted at the time of sale. All freight costs are to be paid by the buyer prior to pickup. Please contact a sales representative for a shipping quote. We ship within 5 business days of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs. ship via UPS ground. Freight may be booked with ... moreany carrier. But usually goes out on the best available. Extra shipping charges: Lift gate truck- Add $128 Residential Delivery- Add $80 If a rigger. A lift gate truck, or a residential delivery is necessary, please notify us prior to quoting shipping. If buyer chooses to use their own freight. Shipping account, and or carrier, they will be responsible for all scheduling, paperwork, claims, and any damages incurred in transit. Local pickup is always welcome. No handling fees apply on local pickup. Any item not picked up within 30 days from the end of an auction will be charged 10% of item(s) cost per month for storage. You are bidding on a used item. Please be sure to ask any and all questions prior to bidding. SOLD AS IS/WHERE IS. We will do our best to answer specific questions but please be aware that the equipment may no longer be located within the original facility and historical information and photos may be limited. Please contact us for return details as they change from listing to listing. For more information. Please call at 860-484-4449. Or email him at bradym@globalmachinebrokers.com
|
|
|
8" POWERMATIC JOINTER, 2HP, 3 PHASE $1,150.00
8" POWERMATIC JOINTER. 2HP, 3 PHASE, VERY GOOD CONDITION, NO RUST, CURRENTLY IN USE, ONE OWNER. Being replaced by 12" jointer. Three sets of knives included. MADE IN USA. Pick up at our dock, or we will crate for shipping via your carrier. $1,150.00. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14942ab9fb2-0x114-
|
|
|
Craftsman 6 1/8-inch Jointer-Planer model 113206931, Vintage Craftsman Planer
Up for purchase is a vintage(around 1979) Craftsman 6 1/8-inch Jointer-Planer model#113206931 in pristine condition. Has been kept in a climate controlled environment for the length of its life. All it needs is its blades sharpened or you can purchase new blades. Only used a handful of times so there is lots of life left. Please contact with questions. Owners manual can be downloaded online for your use. Pick up only
|
|
|
Craftsman 6-1/8" jointer, excellent condition. LOCAL pickup only
Craftsman 6-1/8 jointer. Excellent condition. No rust. No abuse. Knives are sharp. No nicks. Comes mounted on original factory stand. Includes owners manual. Please note: Local pick up only. Cannot ship.
|
|
|
INDUSTRIAL DAYTON 8 " JOINTER 220 VOLT
UP FOR AUCTION DAYTON 8" JOINTER 220 VOLT IT IS IN GOOD SHAPE AND WORKS WELL 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-1494a326e8e-0x115-
|
|
|
Craftsman JOINTER & Motor-1/2 HP Motor-4 3/8" Blades Runs Strong! SOUND!
Stores Hi. I have just added free shipping! A Rare find. Beautiful. Listed first in the 1947 Sears Wish book. Page 1149B! This model was made for many, dependable years. This table is 5 1/2 wide by 25 inches long. She has three cutting blades. Which are 4 3/8 inches wide and they are sharp with NO nicks or cuts! NO bearing play in either one. This gal was well taken care and you will like it or your money back! No questions asked. The motor is A 1/2 Horsepower made by the Delta Electric Company. Which even has A length of wire with some olde asbestos clad insulation! Factory Battleship Gray. Factory Fence and Knobs. Blade adjustment works just like they did in the 50s. She is Switch ready for your workshop. Ready to go to work! I have the original Base for this gal; if you are interested and/or close. I can shoot you some pictures? This will ... morego out either Fed Ex or UPS. In either case. Please allow me about A week? If it will be cheaper for you, I may ship these separately via the Post Office and I will refund any extra funds. Check out my other olde Craftsman tools-
|
|
|
DELTA MODEL DJ20 37350 8" WOOD JOINTER *SINGLE PHASE* + BASE
Call Us Today! 626.330.4647| DELTA MODEL DJ20 37350 8" WOOD JOINTER*SINGLE PHASE* + BASE, MODEL DJ20 8" WOOD JOINTER SINGLE PHASE SERIAL NO: 7092 1.5 HP 230 VOLTS 60 HZ MADE IN BRAZIL STAND MODEL: 52-671 MEASURES: 76.5" x 27" x 39" WEIGHT: 474 LBS Copyright 2014 1 Machinery Sales.com | All Rights Reserved, Descriptions Please read descriptions carefully. We list any features, specifications and details we know and/or research. If you don’t see the information you need or notice any discrepancy; Contact Us! We are here to answer all your questions regarding our eBay Listings and our eBay Store. Payments We accept Visa. MasterCard and Discover via PayPal. Payments are expected within 3 days after the close of the auction. An eBay Non-Paying Bidder Notification will be filed if payment has not been received. Item(s) ... morewill be relisted after few days and no payment from previous transaction will be accepted. Sales Tax is calculated on the final auction cost plus shipping charges and must be paid prior to shipment. Storage We offer storage services from small items to full containers. We also offer container loading. Contact us for prices. For buyers bidding on. Or buying multiple items, we will hold them for up to 7 days at no charge, after 7 days fees may apply. Contact us when you are planning to bid on multiple items across multiple days. Feedback Positive feedback will be left after payment has been received. If after receiving your item. You have concerns, questions or the item is not what you expected please Contact Us! We want to make your transaction a pleasant experience. Don’t leave Negative or Neutral feedback before doing it. We are professionals and we are here to help you. Return Policy We accept returns for all our items listed as working. Items listed in“AS IS” condition or“For Parts or Repair” have no warranty. Read our descriptions carefully. We give 14 days to Contact Us and return the item. Refund can be process in the form of exchange. Merchandise, store credit or money bac
|
|
|
Jointer 8" 1 1/12 HP 3450 RPM
Great condition ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-149564ec516-0x111-
|
|
|
Delta Rockwell 8" x 66" Jointer Single Phase 110, 220V. New bearings, etc.
We have two joiners so one has to go. This 8" Rockwell(shown in the back of our 6" long-bed on one photo) is complete with dust collection fittings and knife setting jig. It has new bearings and redone electricals. This type of electrical starter provides great protection for the 1.5HP motor. I just had the knives sharpened and I believe I have an extra set of knives. And if not, I will discount accordingly. Joins perfectly and runs on either 110 or 220 single phase. It is set up for 220V single phase now and it could be changed easily to 110V. If you are wanting to try it out, we can wire it again to 220 in the shop. A beautiful machine that should last for a few more generations. We need the space for our next project so shoot me an offer. Too. I think this would be perfect for a garage-based woodworker or as a second joiner in ... morea mill shop.
|
|
|
Powermatic 60B 8 inch jointer
5HP 3 phase. 8 years old. Has had light duty. Extra set of three knives included with original setup tools and manual. Operational
|
|
|
WALLACE JOINTER 8" (Woodworking Machinery)
Older Wallace 8" jointer direct drive. Helical 3 blade cutter head, 40" bed, 38" fence, 110v operation. Works great. Thanks for looking. See my other listings. Pick up only Posted with g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-149594f931a-0x115-
|
|
|
jointer 8" grizzly INC. model G0500 4 knife 75" table with Handwheels
Used but almost NEW 8 in. JOINTER 2HP 4 Knife EXTRA LONG 75" table with Handwheels adjustment prewired at 220v model Go500 12 amps draw can be rewired for 110V with INSTRUCTION MANUAL for Go500
|
|
|
Craftsman 6 1/8" Bench Top Jointer - Planer 15000 CUTS PER MINUTE, 5000 RPM 1HP
Craftsman 6 1/8" Bench Top Jointer- Planer 15000 CUTS PER MINUTE. 5000 RPM 1HP THIS ITEM IS USED! PLANER WAS TESTED AND WORKS GOOD. ALL ADJUSTING PIECES WORK. HOWEVER SOME ARE LITTLE HARDER TO MOVE WITH. WD40 WILL PROBABLY HELP. PLEASE SEE ALL PICTURES FOR A BETTER IDEA OF THE COSMETIC CONDITION. Picture is actual item you will receive. Please see pictures for best item description. Please read the item description and look at the photos carefully before bidding We will describe the item to the best of our ability. PLEASE ASK QUESTIONS PRIOR TO BIDDING. WE WILL BE MORE THAN HAPPY TO ANSWER QUESTIONS THE BEST WE CAN. Buyer assumes responsibility for all shipping and processing charges. THIS AUCTION IS FOR 1(one) item unless otherwise specified. Delaware Gold& Pawn reserves the right to end any auction at anytime! All of our items ... morewill typically ship within 1-2 Business days After payment is confirmed. WE ONLY ACCEPT PAYMENT THROUGH PAYPAL AND ONLY SHIP TO U.S. ADDRESSES Except Hawaii. Alaska and Puerto Rico. We use only UPS Ground Service and are not able to ship to P.O Boxes and APO's. Be sure to check out our other items and save us as a favorite seller! Keep an eye on our auctions. You never know what we might have! We are a Pawn Shop and buy most of items from our walk-in customers. We Strive for nothing less than 5 Star FeedBack and 100% satisfied buyers! If for any reason you are not completely satisfied with your purchase before leaving feedback Please contact us with any questions or concerns at 302-384-6734 ask for Don In Internet dept. We appreciate you looking at our items. Good luck and Happy Bidding. Start_elivehelp_btncode end_elivehelp_btncode
|
|
|
Rockwell Delta 8" jointer and dico base art nevo
good condition. Parting out machine. Let me your what you need and I will list. Good condition. table has some light markings. Comes with 2 horse china motor. Will sell base for $500, has all original screws. Will deduct if you don't want the motor. also have another same jointer you can have if you like it better. call 321 460 3256 for questions.
|
|
|
8" CRAFTSMAN Jointer-Sander Disc Table Radial Saw Sanding Plate Wheel #9-2274,
CRAFTSMAN JOINTER SANDER 8" PLATE CAT. No. 9-2274 WITH 3/8-1/2" HOLE. THIS IS THE"EXTRA" DISC WHICH NEVER SAW USE AND HUNG ON A PEG FOR YEARS.
|
|
|
Dispoz-A-Blade Jointer Knife System, for most 8" Jointers Esta USA DispozABlade
Original owner of the Dispoz-a-Blade System from an 8" Jointer. Includes four holders and eight double edged blades. New this sells for over $400.00! I used these with a Grizzly Jointer but they will fit other makes with a standard 8" head. I.e. Jet, Delta, Powermatic, etc. I have moved to a 12" Jointer so I no longer have a use for the system. Works Great! From ESTA USA SELF-SET planer and jointer knives. From Dispoz-A-Blade, provide instant, accurate and economical knife changes in almost every popular machine.Unlike every other quick-change knife system. The Self-Set knife installs in your machine's original cutter head without the need to buy and install a costly special cutter head. Self-Set knives require no machine modifications or the use of jack screws. Springs, setting gauges, jigs or measuring tools. Instead, ... morethey take advantage of the company's disposable double-edge HSS inserts. The time it takes to change knives has now been reduced to the time needed to loosen the cutter head gib bolts. Replace the dull edge and retighten. This will be well packed for safe travel. Sorry. The postage is slightly higher due to Insurance and Signature Confirmation. Please read the complete item listing and our Terms and Conditions below before you decide to bid or purchase. I have 100% feedback. Bid with Confidence! Thank you! Please read the complete item listing and our Terms and Conditions before you decide to bid or purchase. If you have any questions at all. Please contact us as we are here to help. We strive to be a great seller and our feedback reflects that. We appreciate your understanding. Thank you! Terms and Conditions for this listing: Unless stated in the item description above. The item is sold AS-IS. No refunds or exchanges, please bid carefully! No International bidders. Contiguous United States bidders only. No other area bids honored, sorry. It is your responsibility to know what you are buying. We do our best to describe in detail what the item is. If you are unsure of anythi
|
|
|
banner logo era 1910 A+ CLEAN STANLEY TOOLS 8 JOINTER wood plane woodworking
Stanley Tools. 1910 TM era Stanley tools No 8 smooth bottom jointer plane. Very crisp and clean shape and a great old tool that would be an upgrade to any collection. Proper parts with banner logo on the iron. Low knob front. Cap is nice, japanning is prob 90% or better. Mouth and bottom are probably as good as it gets for this era Stanley. Used but not abused. I think you'll be pleased with the shape of this plane. A nice decent No 8. Please check pictures. for more great items! PayPal accepted. Checks welcomed. We ship within 2-3 days after payment, many times earlier. BUYER TERMS: Buyer to pay priority mail shipping fee. We quality pack items. But once it leaves from the post office it is out of our control. All paper items zip-locked, if they fit, to protect from water damage. ANY CLAIM FOR ITEMS DAMAGED OR LOST IN SHIPPING OR POST ... moreFOR WHICH INSURANCE HAS NOT BEEN PURCHASED WILL NOT BE ENTERTAINED. Please email me with any questions prior to bidding. I list a wide variety of items and I try my best to describe items accurately. Accurately includes; general condition and/or working condition of the item. If there is a nuance of condition specific to your collectable please ask prior to bidding. If you do not ask and I happen to miss condition/functions I will not refund or partial refund. As is. Where is unless you ask first. I check my email many times during the day so feel free to contact me with questions. txzj pxzj6557 txzj39 txzj50
|
|
|
Craftsman 6-1/8" Jointer/Planar
This is a Craftsman 6-1/8" Jointer/Planar 3 Cutter Knives 15.000 Cuts per Minute Fence tilts 45 degrees inward and outward 1/8" Max depth cut 2HP motor Model 351.22724 Code No. 9808 Practically brand new. Only used a few times. Blades are sharp and cut well.
|
|
|
CRAFTSMAN CONTRACTOR SERIES 2 H.P. 6-1/8 INCH JOINTER PLANER
You're viewing a Craftsman Contractor Series 36-inch jointer-planer. This is a professional unit driven by a powerful 2 h.p. motor. So the sky's the limit when it comes to flexibility, power and precision. The rear gate swings from 45 to 90 degrees in a snap while the 6-1/8 inch 3 blade cutter cuts at a rate of 12,900 cuts per minute. to make quick work of any hardwood! Seller will also provide a disk version of the instruction manual for a Craftsman jointer. This premium machine features manual and intricate adjustments to insure accuracy. Squareness and flatness of all cuts including adjustments to the fence tilt scale itself. There are also 90 degree and 45 degree fence stops located on the left end of the fence. A fence lock knob facilitates repeatability and consistency. The slide bracket allows the work to be cut on any part ... moreof the rotating blades(to assure a sharp cut every time) It's simple to adjust the planing depth up to 1/8-inch by setting the differential between the infeed and outfeed tables using the depth of cut handwheel to the right of the unit. Infeed and outfeed tables are also adjustable to insure parellel. In addition to standard jointing and planning functions. The machine can perform custom chamfering and beveling operations thanks to it's easy to use precision controls. The unit is sold"as is. so do your research before purchasing. Model#113.232211, Serial#92306R0029. I have tested the unit and can verify that everything is in apparent working condition. I'm a veteran shipping manger. So unit will be securely packaged for shipment. Contact seller for shipping arrangements along with shipping and handling charges. Buyer agrees to a 30% restocking fee if returned for any reason. If this item goes to an international buyer, I will only ship to countries to which I can insure the shipment and that I can receive signature confirmation. I will only ship to the address listed on your profile.FOB Origin.
|
|
|
Vintage Sears Craftsman Badge/Logo/Emblem Table Saw, Jointer,.. etc, 3 5/8" wide
Sears Craftsman Red Oval Badge. Badge is 3 5/8" wide and 1 1/4" tall with fasteners spaced at 2 3/4" Includes mounting fasteners as shown. Removed from a 60's Craftsman model 113.27520 10" Table Saw. Will fit other Craftsman tools of similar vintage. Combined shipping discounts are provided when possible on multiple items. Feel free to contact us for a specific quote prior to bidding. Discounts will appear on a combined invoice after each purchase. Delivery Confirmation is included in the Domestic Shipping and Handling Charges. International buyers are responsible for all additional shipping costs such as duties. Taxes, and customs clearance fees.
|
|
|
sears craftsman 41/8 jointer planer 5/8 hp 149.236223
Used. Works.
|
|
|
Authentic Original Poitras Woodworking Machinery 8" Jointer JT-205 Brochure
POITRAS 8" JOINTER MODEL JT-205 SALES BROCHURE This listing is for one original Poitras Machinery sales brochure. Single sheet. Describes the construction and dimensions of their Model JT-205 8" jointer. This paperwork came from a working machinery dealer and has hole punches. Soiling, and mild wrinkles. Please see photos for exact condition. Shipped lettermail anywhere in Canada and the USA for $10. Between two pieces of archival grade magazine board in a 9x12 envelope marked"Do Not Fold" I will ship promptly. But the item is in Canada and may take up to six weeks for delivery. I do not have time to respond to impatient buyers because of the slowness of the postal system. If your item takes longer than six weeks to arrive I will definitely work with you to resolve the issue but until that time I will not respond. Item ... moreis insured for full purchase price less shipping. Sorry, no tracking number is available. No returns/refunds. I WILL COMBINE SHIPPING FOR UP TO FIVE ITEMS. I will also. Upon request, hold your shipment by up to a week to allow you to fill your order. In every five item package I send out I'll add a bonus item. I have a large collection of vintage wood and metal working catalogs and manuals from all the major manufacturers that I will be listing in the future. Please see my other auctions and keep checking back for more items like this.
|
|
|
RYOBI JP155 6 1/8" BENCHTOP JOINTER PLANER VARIABLE SPEED GOOD USED CONDITION
This is a very nice used Ryobi JP155 Benchtop Jointer Planer. I've used this sparingly in my shop for about 2 years and it has served me well. This has ample power to handle even the largest pieces of wood. I was surprised at the ability of this small jointer to work through some very tough old barn wood I was working with. The variable speed feature is really nice for finding your feed rate. The unit has a two-blade cutter head and blades are readily available online. Although this has a couple good nicks in the blades. It still has plenty of surface area for jointing smaller pieces. No lack of power here! The feed deck has a pretty good gauge in it but this doesn't affect the feed in any way. This has a tilting, adjustable fence with cutter guard, also a vacuum port for dust collection. Sorry, no manual or box. Check my other auctions ... morefor more good used tools. PLEASE PAY WITHIN 5 DAYS OF AUCTION CLOSING VIA PAYPAL ONLY. SHIPPING IS A FLAT RATE OF $16 ANYWHERE IN THE LOWER 48 STATES VIA UPS GROUND SHIPPING WITH TRACKING.
|
|
|
Delta LONG bed jointer 8 inch dovetail and base 37-315 with mobile base
Nice Delta 8 inch long bed jointer. Model 37-315 Original Delta motor 115/230 volt 1.5 hp single phase Please see pics for condition.
|
|
|
Rockwell Delta 8" 240 Volt Industrial Jointer
Rockwell Delta 8" Industrial Jointer. 240v. In good working condition. As taken from service. Light use in our custom Mill-work shop which we have closed down. Blades are installed but there condition is unknown. Would recommend sharpening or replacement before putting into service. Local Pick-up Preferred. However, I could pallet and shrink wrap for $50.00 Additional. Freight would be additional as well.
|
|
|
Jointer 8" grizzly INC SLIGHTLY USED G0500 4 knife 75" table with Handwheels
Used but almost NEW 8 in. JOINTER 2HP Motor 3450 RPM with 4 Knife cutterhead speed of 5500 RPM cuts per minute 22.000 EXTRA LONG 75" table with Handwheels adjustment with magnetic w/thermal oyerload protctor switch prewired at single- phase 220v model Go500 12 amps draw can be rewired for 110V comes with INSTRUCTION MANUAL for Go500
|
|
|
(2) Vintage Sears Craftsman/King Seeley 4 3/8" Jointer Table Slides,Brkts & Gibs
2 Pair Sears Craftsman 4 3/8" Jointer Slide Assembly. Holes on the top and bottom castings are 1 5/32" apart. Assembly is tight and shows no wear. Can be used on the infeed or outfeed table. Upper Slide- 29421 Lower Slide- 29419 Gib RH: 29422 Gib LH: 29423 Removed from a 60's Craftsman model 103.23340 4 3/8" Jointer. Will fit other 103.xxxxx series jointers of similar vintage. Please see our positive feedback and premium seller ratings. Ships Free with Tracking and Insurance. 30 day Money Back Returns. Thanks, Mike.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-149bd4810d2-0x105-
|
|
|
Delta Homecraft 4" Jointer Table Screw Hand Knob, Handle, Stud, HJ-12, J-8
Delta Homecraft 4" Jointer Hand Knob. Stud, HJ-12, J-8 Shows use. See photos. No cracks. Breaks or repairs, good threads. Fully functional. See my other auctions for additional vintage Homecraft machinery parts. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-149c1bc2c08-0x105-
|
|
|
Vintage Jointer Three Blade Assembly With 6 1/8" Blades ~ 5/8" Shafts ~ Heavy!
This is a Vintage Jointer Three Cutter Blade Assembly. I do not know what brand it is and there is no maker's mark present. The removable blades measure approx. 6 1/8" and do not appear to have carbide inserts. They are in good condition. As you can see in the photos. There are two 5/8" dement shafts; one is 1" long and the other is 2 1/4" long and has a slot, as you can see in photo#2. The body. Itself, measures approx. 2 7/16" in diameter. The assembly is very, very solid and heavy, weighing in at over 7 pounds! The pictures above show the condition of the actual item you will receive. As I don't use stock photography. I have no other accessories, manuals or extras that are not pictured. It has an overall somewhat rusty patina, but it appears to be in very good condition besides that, and there are no cracks, ... morechips or dents that I cam see. Basically, it looks as it does in the photos… Because of the vintage nature of this unit. And because I was unable to test it, I am selling this piece"as is” and as a collectible. I will very carefully ship this Vintage Jointer Three Cutter Blade Assembly to you via USPS Priority Mail. I ship within one business day. I'll be sure to send you a follow-up message containing a Tracking Number! Thank you for bidding!
|
|
|
Powermatic 60 jointer - 1970's - 8" long bed 95 % restored.
Powermatic 60 jointer- 1970's- 8" long bed 95% restored. Needs 3 mounting bolts. And hardware to the part in picture 5. Blades were removed and sharpened. Pickup in Norwich. CT, only'
|
|
|
Craftsman 6 1/8-in Jointer/ planer - Benchtop - Used- plus new knives
You are bidding on a used benchtop Craftsman 6 1/8-in Jointer/ planer with dust bag. Push blocks, and a new set of knives. The jointer/ planer is in working condition. Sorry this item is too heavy to ship. Local pick up only. Adjustable infeed Table for cuts up to 1/8 in. deep. Plane boards up to 6-1/8 in. wide with two high-speed steel cutting blades. Delivers 8000 rpm. 16000 cuts per minute, 1-1/2 hp maximum developed motor, Fence adjusts up to 45 degrees inward/outward for bevel and chamfer cuts, Rear chip discharge, On/off safety switch with removable key, Includes two structural foam push blocks, Includes new set of knives,
|
|
|
(6) Sets Vintage Sears Craftsman/King Seeley 4 3/8" Jointer Leveling Jacks
6) Sets Vintage Sears Craftsman/King Seeley 4 3/8" Jointer Leveling Jacks(6) Leveling Jacks 18516(6) x611(6) x232 Removed from a 60's Craftsman model 103.23340 4 3/8" Jointer. Will fit other 103.xxxxx series jointers of similar vintage. Please see our positive feedback and premium seller ratings. Ships Free with Tracking and Insurance. 30 day Money Back Returns. Thanks, Mike
|
|
|
Vintage Sears Craftsman/King Seeley 4 3/8" Jointer, Elevation Handwheel Lifter
Sears Craftsman 4 3/8" Jointer Handwheel and Lifter Assembly. Handwheel is 2 1/2" in diameter and fits a 3/8" diameter shaft. The handle is 1 3/16" long. Handwheel: 18620 Set Screw: X-109 Lifter assembly Removed from a 60's Craftsman model 103.23340 4 3/8" Jointer. Will fit other 103.xxxxx series jointers of similar vintage. Please see our positive feedback and premium seller ratings. Ships Free with Tracking and Insurance. 30 day Money Back returns. Thanks, Mike
|
|
|
Vintage Craftsman/King Seeley 4 3/8" Jointer Knives/Blades, Sharp. Set of 3
Set of 3 Vintage Original Sears Craftsman 4 3/8" Jointer Knives. Sharp 4 3/8" long. 11/16" wide, 1/8" thick Knives: 18127 Removed from a 60's Craftsman model 103.23340 4 3/8" Jointer. Will fit other 103.xxxxx series 4 3/8" jointers of similar vintage. Please see our positive feedback and premium seller ratings. Free shipping within 48 hrs and Free Tracking and Insurance. 30 day Money Back Returns. Thanks, Mike
|
|
|
Delta Homecraft 8" table saw and 4" jointer model 37-110
Very good mechanical condition. Original motor. Where have you seen a complete set before? The jointer is always missing. One new belt. I have used both the saw and the jointer. And I love this set, but I am out of room for collectibles. I need winter space. Original owners manual for jointer! This was a"barn find" I couldn't pass up. Fence and miter gauge are accurate and not bent. There are no signs of repairs to anything on the set. Stand is wheeled, but they are new. I have run both the saw and jointer at the same time, but I think you're supposed to disconnect one of the belts which is easy since the motor is hinged. New cord to motor and switch. All the thick steel makes this a very heavy beast. This team will outlast you. Jointer appears to have minimal use. Parts value eclipses asking price. Local pick up only. 20175. ... moreNot a beginners saw. No safety features except jointer blade guard.
|
|
|
Craftsman 6-1/8" Jointer-Planer with Metal Rolling Stand Model 113.20680
Original owner with big plans. Yep. Big plans. Lightly used. 1/2hp motor. Rolling stand. Fence tilts to 45deg. Had blades sharpened to sell. Nothing wrong. Just need the space for bigger plans. You'll see when you come pick it up. 20175 zip code. You can try it before you leave with it. If it doesn't work as I've said. I'll credit you back on Paypal.
|
|
|
8" cutter moulder head, carbide 173 stagger shaper planer jointer Blades 2-3/8"b
All carbide tips in very good shape. a few have very small chips. 2-3/8" bore(tapered on ends see photos) 8" cut, 6.5" Diameter. no shipping combos on this one. very heavy. as is.
|
|
|
Delta DJ-20 8'' Precision Jointer w/User Manual Working! Buy with Confidence
Click on pictures to enlarge LOCAL PICK UP IS AVAILABLE AT NO COST(If there are any issues with the item please call or email before opening a case or leaving a negative feedback. We will resolve the issue within 24 hours) Item Details: Delta DJ-20 8' Precision Jointer w/User Manual MODEL: 37-350 SIZE: 8' USER MANUAL: IS INCLUDED CONDITION: USED/WORKING Comes as pictured Warranty:Guaranteed against DOA Lister 55477 5/6/2014 Payment Details: We accept payment through Paypal. PayPal provides fast and secure transactions. We ship to confirmed PayPal address. No Checks or escrow. Canadian buyers are responsible for all custom- brokerage- GST and PST charges Shipping Information: We usually ship within 1-2 days after payment has been received. We allow FREE local pickup please call at 303-219-3918/303-521-3869 to arrange pickup. Our address ... morefor pickup is SUM Computers Inc. 4945 Monaco St Commerce City CO 80022 Warranty Information: All items come with non DOA(Dead on Arrival) warranty unless stated otherwise. If the item arrives damaged please let us know and we will file a claim with the shipping company. Sorry we do not offer any warranties on the batteries software and operating system issues. Feedback and Contact Information: Our system is automated and will leave positive feedback upon receiving positive feedback. Please contact us if there are any issues with the item. Please give us an opportunity to resolve the issue before leaving any bad feedback. We try our best to explain the item with utmost accuracy but sometimes there are human errors. Please do not hesitate to email us with any questions or concerns. Why Buy from US! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Ridgid 6-1/8" Jointer Planer (LIGHTLY USED. INCLUDES ROLLER STAND) LOCAL PICKUP
This is a terrific and highly rated jointer by Ridgid. I used the tool for one small project and no longer need it. I would certainly keep it if I had a continuing need. The alignment and squaring are intact. The knives have never been turned and so are new on one side. One would have to spend well over $500 to get a jointer of this quality. Product Description 1 HP heavy-duty motor heavy duty induction motor operates on 120V or 240V. Totally enclosed to prevent sawdust contamination, fan cooled for longer life, belt drive delivers smooth consistent power Heavy duty. Cast iron bed minimizes vibration, machine ground surfaces for precise jointing/planing, sturdy heavy gauge wide stance cabinet with built-in sawdust collection port and on-board tool storage Dual bevel fence with stops at 45°. 90° and 135° Convenient dust port ... morequickly slides out of the way when not in use. Provides on-board storage for blade alignment tools Versatile bed/table long 45" bed gives greater support to large workpieces. Rabbeting ledge for precise rabbets up to 1/2" deep, adjustable front and rear tables.
|
|
|
Delta DC 20, 8" Precision Jointer Mdl 37-680, Ideal Gift for Serious Woodcrafter
Floor standing. On genuine Delta accessory Mobile Base, Heavy(450 pounds) rugged Cast Iron on steel floor stand. Made in the USA, Used less than 100 hours, Single Phase. Heavy Duty 1-1/2 HP motor, 240 Volt single phase motor, 20 foot 12AWG power cord, Can be wired for 120 Volt, Cutting capacity 8" 203mm) width. 5/8" 16mm max) depth, with 5/8 Rabbeting(Photo) Three knife cutter head at 15.500 cuts per minute for smooth finish, Front and rear cutter head guards for safe operation, Includes Pushblocks for safe feeding thin or short stock, 78" long infeed and outfeed tables for precision flattening of warped stock, Fence can be adjusted to positive stops for plus to minus 45 degrees and 90 degrees(Photo) On/ off switch can be locked out to prevent unauthorized use Buyer provides lock, Factory manual illustrates how to adjust and ... moreoperate the machine Manual provides guidance for producing quality work, Buy this or buy new at $1799.00 to $2199.00
|
|
|
Rockwell Delta 8" jointer chip chute
good condition. surface rust. repainted not bent or beat up.
|
|
|
Delta DJ-20 8'' Precision Jointer 3 Phase
This is a Delta 8" Jointer 3 Phase. I bought this from a closed down detention center. I bought the whole carpentry shop. I was told that they all worked before the facility closed. But, I am not able to test these, because they are in my garage and I do not have the power to run the 3 phase required. Please ask any questions you have and I will try to answer them the best I can. I am not trying to scam anyone. Please refer to my Feedback, I am a very honest seller. I priced this accordingly since I can not run it for you. This is a pick up only. I will allow you however to send your own freight company to my house to pick this up. It is on a skid and extremely heavy.
|
|
|
2" bore 3-1/2 wide CARBIDE Tipped Jointer Shaper Cutter 8" Diameter 132
staggered cutting surface with circular blades on the end. 2" bore. 8" diameter and 3 1/2 cutting height. seems to have all carbide intact. see pictures for details. as is.
|
|
|
Powermatic 60 Cutterhead 8 inch Jointer
Cutterhead with knives. Gibs, and shims from 1975 machine. Surface rust removed, all parts cleaned and reinstalled. Original Powermatic knives have never been sharpened and have a couple of nicks. Cutterhead diameter = 2.7" Cutting circle = 2.85" Shaft diameter(bearing) = 0.78125" Shaft diameter(pulley) = 0.75"
|
|
|
Delta Milwaukee No. 5275 PULLEY (2 3/4"; 5/8 bore) from 6" jointer
Used JTR-8 number 5275 PULLEY from DELTA Milwaukee 6" Short bed Jointer; serial number 54-4598(circa 1947) 2 3/4" OD; 5/8" bore. With key way and set screw Cast alloy construction 7/16" 14 thread Con dition: From working jointer. Ready to go back to work. Questions? contact me and I will answer as best I can. Payment must be made within 5 business days. Happy to combine shipments Buyer pick up always OK
|
|
|
Used Bridgewood 8" jointer, used, good condition, woodworking machine
Hello. I have a Bridgewood jointer for sale. 8 inch width, 67" over-all length. This jointer is used, it is in good condition, although it has some scuffs/ dings, and some staining and light pitting on the table. Will not affect usability. The tables should be aligned before using. This is a sliding dove-tail type setup.Comes with 2 sets of blades, they will need to be sharpened before use. 3 phase power, this is why I can't use it in my home shop, I don't have 3 phase at home. Feel free to email me for more photos. Local pickup, I can help load but it is heavy, you will need 2-3 strong people, additionally, to help. Buyer must pick up locally or arrange for pickup, including all expenses, packing, wrapping, palletizing, shipping and insurance. I will be glad to help load onto a truck but if you pick up, you will need 3-4 people ... moreor a forklift, this weighs about 350 pounds. Thanks for looking, and happy bidding!
|
|
|
RIDGID Model JP06101 6-1/8" JOINTER / JOINER / PLANER **LOCAL PICKUP ONLY**
THANK YOU FOR VIEWING! WE ARE PROUD TO PRESENT THE FOLLOWING FANTASTIC DEAL FOR YOUR PURCHASING PLEASURE RIDGID Model JP06101 6-1/8" JOINTER/ JOINER/ PLANER*LOCAL PICKUP ONLY* THIS ITEM IS AVAILABLE FOR LOCAL PICKUP ONLY- IN THE TAMPA. FL AREA Please contact us for more information or assistance. Item Condition: PLEASE READ ALL DESCRIPTIONS AND VIEW ALL PHOTOS- UNIT POWERS ON IN WORKING CONDITION- CAME FROM A PROFESSIONAL CABINET MAKER THAT WAS RETIRING AND MOVING- UNIT HAS WEAR. DUST, RUST, AND BLEMISHES FROM USE- HAS SOME WOOD CHIPS IN THE DUCT AND COULD USE A GOOD CLEANING- MEASURES APPROX. 46" ACROSS AND STANDS APPROX. 34" TALL- INCLUDES ATTACHMENTS SHOWN- WE RECEIVE ALL OF OUR ITEMS FROM LOCAL ESTATES. AUCTIONS, AND PROPERTY LIQUIDATIONS- ALL OF OUR ITEMS ARE PRE-OWNED- ALL ITEMS MAY HAVE WEAR, BLEMISHES, AND IMPERFECTIONS- ... moreALL ITEMS MAY HAVE DUST AND/OR DIRT BUILD UP AND MAY NEED TO BE CLEANED OR WIPED DOWN- WE SELL IT LIKE WE GET IT- BUYER WILL RECEIVE THE EXACT ITEMS SHOWN IN THE PHOTOS(NOTHING LESS AND NOTHING MORE) VERY RARE FINDS- EVERYTHING WE SELL IS ALWAYS SOLD AS IS WITH NO WARRANTIES OR GUARANTEES IMPLIED- INCLUDES ALL ITEMS PICTURED- SELLING AS IS WHERE IS- AS DESCRIBED PLEASE READ ALL OF THE IMPORTANT INFORMATION BELOW EVERYTHING we sell is ALWAYS sold" AS IS. WHERE IS" WITH NO GUARANTEES OR WARRANTIES. Please CLICK ON THE PICTURES and look at ALL of the photos VERY CAREFULLY. All of our items are PRE-OWNED and most have imperfections of some type. Winning buyers will receive EXACTLY what is shown and described in the purchased listing(s) If you do not see something in the photos or text. PLEASE assume that it is not included with your purchase. PLEASE make sure you enter the most accurate and up-to-date shipping address during the checkout process. We apologize that we cannot ship to PO BOX addresses. Please provide a confirmed physical address for delivery. We are unable to guarantee dates for package deliveries. Any delivery date shown to you is simply a guess fro
|
|
|
Craftsman-CUTTER HEAD ASSEMBLY- 6-1/8 JOINTER / PLANER -113.206933- Part # 21450
Vintage SEARS/ CRAFTSMAN Model No. 113.206933- 6-1/8" JOINTER/ PLANER"CUTTER HEAD ASSEMBLY" only- Part No. 21450 Price Includes Shipping! We have for your consideration a used part number 21450- CUTTER HEAD ASSEMBLY" only- that came off a Sears/ Craftsman Model No. 1 13.206933- 6-1/8" JOINTER/ PLANER. The CUTTER HEAD ASSEMBLY would appear to be in average to good overall used condition. I do not see any obvious cracks- breaks and/or repairs. The bearings turn freely and smoothly- in my opinion would seem to be ok. 14.00 Normal 0 false false false EN-US X-NONE X-NONE The c utter head may fit different model jointers- please check your owners manual for part number compatibility. Just FYI– if you don’t have a manual for your tool– you can google the model number and usually find a free download of the manual for your ... moremodel tool– to compare part numbers. Please refer to all 12 of the pictures for measurements. The arbor shaft measures- 5/8" in diameter. Cutter head assembly- will need some cleaning. What can we say- please take a good look at all(12) pictures. Please note: there are no other items and/or attachments of any sort included in the sale- what you see is what you are getting" The"CUTTER HEAD ASSEMBLY" is used and does show some wear- scratches- nicks- tarnish& staining with some areas of surface rust from normal use(see pics) The cutter blades look to be in pretty good shape- some nicks(see pics) we only mention this for accuracy as it does not detract from the usefulness of the part. Just a reminder- what you see is what you are getting- and once more- Price Includes Shipping! Please look at the pictures carefully and do not hesitate to ask questions before bidding. Thanks for doing business with us! Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 OK. Time for the LARGE Fine Print: In the interest of making this a very pleasant experience for everyone. We would respectfully ask that all potential bidders read the below statements. 1
|
|
|
Ridgid JP0600 6-1/8" Jointer/Planer 5669-1
Ridgid JP0600 6-1/8" Jointer/Planer 5669-1 Shipping Info: Weight:250 Size:8*24*40 QUESTIONS Please ask all questions 48 hour before the end of sale. Please note our eBay department is closed on Saturdays and Sundays. We will work to answer your questions as quickly as possible. Local pickup available at; urtoolshop.com 144 broadway hillsdale nj 07642 If you plan to pick up your item up at our Hillsdale NJ shop. Please, we need one day notice. Your item is in our warehouse and it will have to be pulled and moved to the shop for pick up. SALE ENDING; urtoolshop.com reserve the right to end this sale at any time as the item is for sale locally. If item is removed it was sold locally. We attempt to remove item/s posted on eBay that have sold out of our brick and mortar shop in a timely manner. If in the event an item/s is purchase on eBay ... moreand it has sold out of our store, we will cancel the eBay sale and issue a full refund to the buyer. Feedback; If you are not happy with your item. Please contact us before leaving negative feedback. We want you happy with your purchase. We will work with you to make your purchase right. ITEMS; All items are sold as used condition unless specified as new. Items are sold as is with no warranty. Missing parts. Used items could be missing parts, please review the description and photographs for possible missing parts. You are buying used equipment at used prices. Condition unknown" is defined as the item may or may not run. PAYMENT; Payment must be received within 24 hours of the close of the sale or auction purchase. Seller reserve the right to cancel the transaction and relist the item if payment is not received within this time frame and will result in a Non-Pay Bidder alert filed with eBay to cover the closing fees of the auction. SHIPPING& HANDLING; Local pickup is available; Loading and shipping are the buyer’s responsibility. Buyer is responsible for all shipping costs. urtoolshop.com can transport up to 100 miles round trip for $2.00 per mile toll additional. We c
|
|
 |