|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: Lansing, United States KOMOS stainless steel draft tower with Intertap faucets, EVABarrier draft line, and Duotight push-to-connect fittings. It's also PVC-free and BPA-free. ... moreIntertap faucet(s). Stainless steel faucet shank(s) with Duotight tailpieces.
Buy It Now
Free Shipping Condition: New Location: China Well matched with the adjustable beer tap, suitable for most beer and for cola kegs. Feature: 1. It is used to connect beer kegs to distribute beer or ... morebeverages, practical. Application: A device for connecting the bottle body to the tap in the process of bottling alcoholic products.
Buy It Now
Free Shipping Condition: New Location: Hibbing, United States ALL STAINLESS STEEL CONSTRUCTION. T-BOLT IS THREADED THE ENTIRE LENGTH TO ALLOW FOR MAXIMUM RANGE OF SIZE AND TENSION. CLAMP WILL HANDLE HIGH TORQUE CREATING ... moreEVEN SEALING PRESSURE AROUND THE COUPLING SHANK. INCLUDES NYLON LOCKING NUT. NOTE DUE TO POSSIBLE FLUCTUATIONS IN HOSE O.D. EACH INDIVIDUAL INSTALLATION SHOULD BE CHECKED.
Buy It Now
Free Shipping Condition: New Location: Hibbing, United States ALL STAINLESS STEEL CONSTRUCTION. T-BOLT IS THREADED THE ENTIRE LENGTH TO ALLOW FOR MAXIMUM RANGE OF SIZE AND TENSION. CLAMP WILL HANDLE HIGH TORQUE CREATING ... moreEVEN SEALING PRESSURE AROUND THE COUPLING SHANK. INCLUDES NYLON LOCKING NUT. NOTE DUE TO POSSIBLE FLUCTUATIONS IN HOSE O.D. EACH INDIVIDUAL INSTALLATION SHOULD BE CHECKED.
Buy It Now
Free Shipping Condition: New Location: Lexington, United States 2PCS Keg Coupler Barb Connector,Stainless Steel 304 Beer Kegerator Sankey Couplers,Hex Nut 5/8"G Thread x 1/4" Barb Beer Line Tailpiece Nipple Fitting ... morewith Sealing Gasket Washer. 3-When purchasing pipe fittings, consider the application, as this will affect material, shape, size and required durability.
Buy It Now
Free Shipping Condition: New Location: China Function: Brewing Beer. Feature: 1. BEER DISPENSER PRACTICAL ACCESSORY Beer faucet extension rod, caliber G5/8, length about 75mm, easy to connect beer ... morekegs or wine dispensers. Item Type: Draft Beer Locking Flange.
Buy It Now
Free Shipping Condition: New Location: United States 【4-1/8 Shank Easy to Install】: Built-in 1/4” barbed fitting and 4-1/8” Shank is widely used to attach a beer or wine line through a wall, refrigerator, ... moreor cabinet. Use the spring to upgrade the faucet to a self-close faucet, or use it as a standard beer tap without the spring!
Buy It Now
Free Shipping Condition: New Location: Bristol, United States Single Tap Jockey Box Kit-No Cooler No Tank. Questions? Give us a call 1-866-235 BEER(2337) ext.140 Single Tap Jockey Box Kit-No Cooler No Tank Item# ... more50COIL-SKT If you have an old cooler sitting in your basement. This kit has everything you need to make your own jockey box. Great for catering companies, frat parties, camping or those weekly tailgate parties! Fill the cooler up with half ice and water and you are ready to go. Kegs must be kept cold at all times. Features• Make your own jokey box• Coil Tubing Dimensions: 50'L x 5/16" Outside Diameter• Outside diameter of coil is 9" All coils are made of 304 beverage grade stainless steel tubing. 1) 3" Steel Shank. 1) 3" Cooler Coupling. 1) Chrome Faucet. 1) Black Faucet Handle. 1) 5' Beer line jumper with connectors. 1) 5' Air line jumper with screw clamps. 1) Double gauge CO2 regulator. 1) US Sankey lever handle coupler. Check Out Our for other Keg Supplies. Draft Beer Equipment and much more! Questions? We're Here To Help: How Much is Shipping? Shipping is calculated accurately based on item weight and your location. You can get a quick quote by clicking the"Shipping& Payments" tab and entering your zip code. If you are outside of the USA, select your country to see international rates* Canada will need to enter postal code) If you're purchasing multiple items from us we will combine shipping at a lower rate. Check out our Smart FAQ! Click the"Ask Seller A Question" link at the top right of this auction(under our seller information) to take a look at our frequently asked questions list in full. If your question is not answered there. Feel free to contact us using the form, or call us toll free 866-235-BEER(2337) Please note. International shipping rates are calculated by weight and are accurate. It's sometimes very expensive, but unfortunately beyond our control, we use the most affordable rates available. What you pay are the actual costs- we do not overcharge and attempt to profit on shipping c
Buy It Now
Free Shipping Condition: New Location: Bristol, United States Sanke Keg Coupler. Complete Single Tap Jockey Box Kit-No Cooler. This kit includes all of the hardware that you need in order to convert your cooler to ... morepour ice cold draft beer almost anywhere! 3" Cooler shank and 3 1/8" faucet shank.
Buy It Now
Free Shipping Condition: New Location: China Feature: 1. Also can use for other scenes which need the G5/8 thread to 5/16in barb fitting. Item Type: Keg Coupler. This beer barrel coupler adapter ... moreis suitable for professional and family brewer.
Buy It Now
Free Shipping Condition: New Location: China Well matched with the adjustable beer tap, suitable for most beer and for cola kegs. Feature: 1. It is used to connect beer kegs to distribute beer or ... morebeverages, practical. Application: A device for connecting the bottle body to the tap in the process of bottling alcoholic products.
Buy It Now
Free Shipping Condition: New Location: Lexington, United States 4PCS Keg Coupler Barb Connector,Stainless Steel 304 Beer Kegerator Sankey Couplers,Hex Nut 5/8"G Thread x 1/4" Barb Beer Line Tailpiece Nipple Fitting ... morewith Sealing Gasket Washer. 3-When purchasing pipe fittings, consider the application, as this will affect material, shape, size and required durability.
Buy It Now
Free Shipping Condition: New Location: Aurora, United States With our easy-to-use Kegerator Conversion Kits, you can quickly and economically transform almost any refrigerator or freezer into an amazing beer dispenser! ... moreThis high quality dual gauge CO2 regulator is perfect for draft beer dispensing, and ideal for kegerator conversions!
Buy It Now
Free Shipping Condition: New Location: Denver, United States
Buy It Now
Free Shipping Condition: New Location: United States Connect long shank compensator beer tap directly to a beer or soda keg,enjoy your party on the go. Adjustable liquor, the amount of bubbles,longer spout ... moreand smooth interior make it little foam. 1 Beer Tap.
Buy It Now
Free Shipping Condition: New Location: United States Feature: 1. Item Type: Beer Tap. Adjustable liquor flowing, the amount of bubbles,longer spout and smooth interior make it little foam. 1 x Beer Tap. ... moreMaterial: Brass. 1 x Handle. If you do not receive our reply within 48 hours, pls.
Buy It Now
$15.05 Shipping Condition: Used Location: Downey, United States Condition is Clean well cared for Used. Made from 304 stainless steel, the Perlick Perl is a high-end, ultra-durable draft beer faucet. You can use this ... morefaucet to serve a wide range of beers, as well as wine on tap, kombucha on tap, large-batch cocktails, or anything else you're pouring.
Buy It Now
Free Shipping Condition: New Location: Bristol, United States Stainless Steel Cooling Coil. Left Hand, 120' x 3/8" O.D. Length 120' Tubing 100' x 3/8" 20' x 1/4" O.D. 304 Stainless ... moreSteel/ Restriction 36lbs/ Dimensions 9-1/2" Diameter x 10" Height/ Includes Grommets, Ferrules, and Hex nut fittings for easy connection to shanks/ Liquid Content 1/2 oz per foot. Stainless Steel Cooling Coil. Left Hand, 120' x 3/8" O.D. Stainless Steel coils are available in lengths from 50' to 120' and are used in an ice-water bath to chill beer down to the ideal dispense temperature of 36-38° F. They are only intended for use with draft beer, and should never be used with any other beverages. Use with wine, cider, citrus drinks, and other acidic beverages will cause pitting and rusting and may even cause holes in the tubing. Length 120' Tubing 100' x 3/8" 20' x 1/4" O.D. 304 Stainless Steel Restriction 36lbs Dimensions 9-1/2" Diameter x 10" Height Includes Grommets. Ferrules, and Hex nut fittings for easy connection to shanks Liquid Content 1/2 oz per foot SETUP& USE INSTRUCTIONS Use rough crush or cubed ice(A) Completely fill cooler with ice for best results. B) Add water until coil(s) are completely covered with ice and water. Adjust CO2 regulator pressure to 12-14 P.S.I. A) Slowing increase pressure until the desired flow rate is achieved. B) DO NOT EXCEED 45 P.S.I. Warm keg beer will cause foam. A) For best results. Keg of beer should be kept out of direct sunlight and insulated with a keg jacket or blanket to limit the temperature increase. B) Do not let the keg temperature exceed 80°F. Ice keg to lower temperature) C) The warmer the keg temperature gets. The more pressure is required for dispensing. Un-used keg beer may be saved for another days use by taking the following steps: A) Bleed off pressure. Excessive keg pressure will over carbonate the beer. B) Re-pressurize to 12-14 lbs. D) Unused portion MUST BE refrigerated. MAINTENANCE INFORMATION Clean coils after each use
Buy It Now
$45.00 Shipping Condition: New Location: Saint Louis, United States Includes standard faucets & shanks. Tower includes 6'ft of 3/16" FDA approved clear vinyl lines. Mounting hardware is included. Specs - 27 1/2"L x 20"H ... more- Tip of faucet to the countertop is 15 1/2".
Buy It Now
$55.00 Shipping Condition: New Location: Saint Louis, United States SSP-6 - NEW - 6 Faucet HEAVY DUTY BRUSHED 304 Stainless Steel Pass Thru Biergarten Tower with 4" O.D. pipe.
Buy It Now
Free Shipping Condition: New Location: Lexington, United States [O.D 1/4" Keg Coupler Barb] Usually connect I.D 1/4" or 3/16" beer tubing. The beer barb can be deeply embedded into the tubing to secure the tubing and ... morenot easily fall off. Pls, soften the tubing in hot water for easier installation before connecting the tubing to the barb.
Buy It Now
Free Shipping Condition: New Location: South Bend, United States For added convenience, Kegco has also included other features like a lightweight 5 lb. The order will be processed and completed by automatic warehouse ... moresystem within 5 minutes.
Buy It Now
$16.85 Shipping Condition: Used Location: Fresno, United States Introducing the Dual Beer Tower Keg Beer Dispenser Kit with 2 Faucet Tap Handles. This is listed used. It was a display model so no liquids ran through ... moreit. It does noted scrapes and minor scratches.
Buy It Now
Free Shipping Condition: New Location: Bristol, United States Designed to dispense many different styles of beer. Standard US style beer dispensing faucet for any beer tower. Use with a new installation or to replace ... morean old one. Lever made of Brass too. Lever Thread 3/8" X 16 UNC.
Buy It Now
Free Shipping Condition: New Location: Aurora, United States 5' of NSF / FDA food safe beverage tubing with hex nut connectors (X2). Includes faucet / shank wrench for easy maintenance.
Buy It Now
$50.00 Shipping Condition: New Location: Saint Louis, United States This dispenser is designed to mount on a wall that has the beer cooler directly behind the wall instead of using long beer shanks that compress the cooler ... morecausing the faucets to loosen and spin. The outside tray is 24" L x 14" H x 6" W and has a centered drain.
Buy It Now
Free Shipping Condition: New Location: Denver, United States 【SAFE MATERIAL】 : This Stout Beer Faucet Made Of Food Grade 304 Stainless Steel, No Harm To The Human Body, And Not Easy To Rust, Very Durable, Will Last ... moreLonger Than Brass Faucets. application ：nitro coffee ,stout beer.
Buy It Now
Free Shipping Condition: New Location: Sioux Falls, United States Skip the standard CO2 draft beer spout and upgrade to the G. Francis Nitro and Stout Keg Faucet for smoother, creamier, and richer pouring. 304 stainless ... moresteel pull forward lever design ensures durability and longevity against acidic beverages and wear and tear while protecting the integrity of your brew.
Buy It Now
Free Shipping Condition: New Location: China Beer Dispenser Practical Accessories: Beer tap extension rod, caliber G5/8, length 330mm, easy to connect beer, wine lines for beer. Length: Approx. 330mm ... more/ 13.0oz. The beer faucet can also be installed in the box as a picnic faucet when going out, practical and portable.
Buy It Now
Free Shipping Condition: New Location: Hibbing, United States ALL STAINLESS STEEL CONSTRUCTION. T-BOLT IS THREADED THE ENTIRE LENGTH TO ALLOW FOR MAXIMUM RANGE OF SIZE AND TENSION. CLAMP WILL HANDLE HIGH TORQUE CREATING ... moreEVEN SEALING PRESSURE AROUND THE COUPLING SHANK. INCLUDES NYLON LOCKING NUT. NOTE DUE TO POSSIBLE FLUCTUATIONS IN HOSE O.D. EACH INDIVIDUAL INSTALLATION SHOULD BE CHECKED.
Buy It Now
Free Shipping Condition: New Location: Burke, United States Triple Tap Draft Beer Tower, Stainless Steel 3" Flange Brewing Tower Stainless Core Keg Tap Dispenser Self-Closing Faucet Spring 1/4" Barb Fitting Kit ... morefor Kegerator Countertop Installation. 【Tight Connection with Faucet Wrench, No Leakage】You can seal the connection between the 3 tap kegerator tower and beer tap tightly with the practical faucet wrench, and attach the hose to the tubing connector tightly with a hose clamp, which will avoid beer leakage effectively.
Buy It Now
Free Shipping Condition: New Location: Denver, United States Up for sale is one professionally refurbished dual-tap beer dispensing tower. Complete with foam liner, hoses, O-rings, and fixtures Very minimal cosmetic ... moreimperfection on this unit(please see photos) And it's in overall great condition The foam liner and hoses are all brand new The tower is made of polished chrome(very lightly"brushed" And the taps are made of stainless steel components This unit has been professionally refurbished by a technician with over 30 years experience in the draft beer industry A must have for any commercial or home bar! Your order will be carefully packaged and shipped within 24 hours of payment cleared Ships via USPS Priority Mail(1-4 days) or USPS Standard Mail(2-9 days) Your choice! A tracking number will be provided to you once your order has been shipped All of my items are backed by my full 14 Day 100% Money Back Guarantee Always feel free to message me with any questions you may have. And Thanks for looking! lnternational Buyers: If you're outside of the continental USA. Please message me for a shipping quote and I'll respond back promptly Please be sure that the shipment of this product to your country complies with your local laws and import regulations
Buy It Now
$24.50 Shipping Condition: New Location: Saint Louis, United States Attached keg jumper hose - a hollow shank out the back of the box allows us to use 6' of 5/16" id hose with standard hex nut fitting that is attached ... moreto the coil. The hose can also be pulled back inside the cooler when the event is finished.
Buy It Now
Free Shipping Condition: New Location: Aurora, United States Pull forward for most of your pour, then push back for a creamy, lacy head finish. Great for nitrogen stout beers like Guinness, or nitro coffee! This ... morebeer / coffee / beverage tower has been upgraded with high quality stainless steel hardware for longer life and better performance!
Buy It Now
Free Shipping Condition: New Location: United States The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A convenient knob style pressure dial that ... morecan be adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines.
Buy It Now
$14.95 Shipping Condition: New Location: United States Tower Finish: Polished Stainless Steel. A mounting gasket and four screws are included for easy mounting.NSF approved. Height to top of column: 14.5". ... moreFinish Polished Stainless Steel. We bring over a decade of experience and knowledge from the brewing and beverage industry online.
Buy It Now
Free Shipping Condition: New Location: Bristol, United States Save money over the cost of our assembled Jockey Box models! Serve cold draft beer in style at your next party or event. Our 3/8" X 50' coil has a 1/4" ... morex 20' coil attached to increase line restriction to decrease foaming and to slow the flow for even better cooling.
Buy It Now
Free Shipping Condition: New Location: Hibbing, United States ALL STAINLESS STEEL CONSTRUCTION. T-BOLT IS THREADED THE ENTIRE LENGTH TO ALLOW FOR MAXIMUM RANGE OF SIZE AND TENSION. CLAMP WILL HANDLE HIGH TORQUE CREATING ... moreEVEN SEALING PRESSURE AROUND THE COUPLING SHANK. INCLUDES NYLON LOCKING NUT. NOTE DUE TO POSSIBLE FLUCTUATIONS IN HOSE O.D. EACH INDIVIDUAL INSTALLATION SHOULD BE CHECKED.
Buy It Now
Free Shipping Condition: New Location: Hibbing, United States ALL STAINLESS STEEL CONSTRUCTION. T-BOLT IS THREADED THE ENTIRE LENGTH TO ALLOW FOR MAXIMUM RANGE OF SIZE AND TENSION. CLAMP WILL HANDLE HIGH TORQUE CREATING ... moreEVEN SEALING PRESSURE AROUND THE COUPLING SHANK. INCLUDES NYLON LOCKING NUT. NOTE DUE TO POSSIBLE FLUCTUATIONS IN HOSE O.D. EACH INDIVIDUAL INSTALLATION SHOULD BE CHECKED.
Buy It Now
Free Shipping Condition: New Location: San Bernardino, United States Item model number KC D4743TT-BRUSH. This 3-faucet brushed stainless steel draft beer Tower is great for adding a 1/6th keg Product to your direct draw ... morekegerator. Size 3 Faucet. Three 5' Clear Beer Lines with Stainless Steel Nozzle and Hex Nut Assemblies.
Buy It Now
Free Shipping Condition: New Location: Bristol, United States All you need is a cooler, drill, and our Jockey Box Stainless Coil Kits to build your own high quality draft dispensing system. Serve cold draft beer ... morein style at your next party or event. Custom jockey box coils and coolers are available.
Buy It Now
Free Shipping Condition: New Location: Aurora, United States With our easy-to-use Kegerator Conversion Kits, you can quickly and economically transform almost any refrigerator or freezer into an amazing beer dispenser! ... moreThis high quality dual gauge CO2 regulator is perfect for draft beer dispensing, and ideal for kegerator conversions!
Buy It Now
Free Shipping Condition: New Location: Bristol, United States Choose which direction you would like it coiled(use one left and one right for a 2 tap jockey box). Custom jockey box coils and coolers are available. ... more304 Beverage Grade Stainless Steel Tubing. Failure to do so may substantially delay the processing of your credit.
Buy It Now
Free Shipping Condition: New Location: China Feature: 1. Also can use for other scenes which need the G5/8 thread to 5/16in barb fitting. Item Type: Keg Coupler. This beer barrel coupler adapter ... moreis suitable for professional and family brewer.
Buy It Now
Free Shipping Condition: New Location: China Feature: 1. Item Type: Beer Tap Tower Shank. It can be connected with beer hose and beer tap, easy to install and use. Selected high‑quality stainless ... moresteel materials, with good durability. Material: Stainless Steel.
Buy It Now
Free Shipping Condition: New Location: Hibbing, United States ALL STAINLESS STEEL CONSTRUCTION. T-BOLT IS THREADED THE ENTIRE LENGTH TO ALLOW FOR MAXIMUM RANGE OF SIZE AND TENSION. CLAMP WILL HANDLE HIGH TORQUE CREATING ... moreEVEN SEALING PRESSURE AROUND THE COUPLING SHANK. INCLUDES NYLON LOCKING NUT. NOTE DUE TO POSSIBLE FLUCTUATIONS IN HOSE O.D. EACH INDIVIDUAL INSTALLATION SHOULD BE CHECKED.
Buy It Now
Free Shipping Condition: New Location: Aurora, United States Build your own KEGERATOR or KEEZER! Our DIY Kegerator Conversion Kits make it easy to quickly and economically transform any suitable refrigerator or ... morefreezer into an amazing beverage dispenser! This high quality dual gauge CO2 regulator is perfect for draft beer dispensing, and ideal for kegerator conversions!
Buy It Now
Free Shipping Condition: New Location: Miami, United States PRODUCT SIZE:Beer Line 5ft Length ID 3/16" OD 7/16" Kegerator Beer Faucet Door Draft Shank With Elbow 1- 2/5" X 3/16" Brass Tube. SPECIAL SPANNER WRENCH: ... moreMade of stainless steel, Convenient for assemble Beer Tower or Beer keg.
Buy It Now
$40.00 Shipping Condition: New Location: Saint Louis, United States DTW62SS-R - NEW -- MADE IN THE U.S.A. Stainless Steel Counter Top Drip Tray with GLASS RINSER - Stainless Steel Form Fitted Grill. 2 Drain holes 15" in ... morefrom each side of the pan 2-1/2" down from top edge.
Buy It Now
$155.00 Shipping Condition: New Location: Saint Louis, United States This dispenser is designed to mount on a wall that has the beer cooler directly behind the wall instead of using long beer shanks that compress the cooler ... morecausing the faucets to loosen and spin. The outside tray is 48 " L x 14" H x 6" W and has a centered drain.
Buy It Now
$2.85 Shipping Condition: New Location: Carmichael, United States NEW: This is to connect a Barbed corny keg disconnect (1/4" MFL to a barbed shank. This is the practically the only shank that is used in standard towers. ... moreAre you having trouble with a foamy pour?. do you have to turn the pressure all the way down and you end up with flat beer?. ).
Buy It Now
$21.75 Shipping Condition: New Location: United States Look no further than Kegco's Ultimate Tower Kegerator Conversion Kit to help you throw the ultimate backyard party or barbecue! bottle of beer line cleaner, ... more16 oz. bottle of Star San, and faucet brush to make it easier than ever to keep your new kegerator squeaky clean between kegs.
Buy It Now
$15.50 Shipping Condition: New Location: United States This is a classy and easy upgrade as the 3" column matches with most kegerator beer dispensers. The removable top makes the back of the draft beer shanks ... moreeasy to access for any maintenance. The tower kit includes stainless steel shanks, beer fittings, stainless steel faucets and faucet knobs for pure stainless steel quality and a polished look.
Buy It Now
Free Shipping Condition: New Location: Lewistown, United States LEVER HANDLE KEG COUPLER: This refers to a D System Keg Coupler that has a strong construction made of nickel-plated forged brass. The probe, on the other ... morehand, is made of stainless steel. It features an easy-to-use design, w you only need to pull the lever handle out and down, in that order, to couple the keg.
Buy It Now
$9.95 Shipping Condition: New Location: United States KEGCO DELUXE TOWER CONVERSION KIT COMPONENTS. Keg Coupler Kegco KT85D-L D System Keg Coupler. Designed with style and convenience in mind, this drip tray ... moreis constructed from 100% stainless steel and has an attractive brushed finish that will look great on any kegerator.
Buy It Now
Free Shipping Condition: New Location: Huntsville, United States For a cleaner looking install, you may want to run the power cord through a small hole you drill through the side or back of your kegerator. Be careful ... moreto avoid refrigerant lines if you decide to drill through the side or back of your kegerator.
Buy It Now
Free Shipping Condition: New Location: Hibbing, United States ALL STAINLESS STEEL CONSTRUCTION. T-BOLT IS THREADED THE ENTIRE LENGTH TO ALLOW FOR MAXIMUM RANGE OF SIZE AND TENSION. CLAMP WILL HANDLE HIGH TORQUE CREATING ... moreEVEN SEALING PRESSURE AROUND THE COUPLING SHANK. INCLUDES NYLON LOCKING NUT. NOTE DUE TO POSSIBLE FLUCTUATIONS IN HOSE O.D. EACH INDIVIDUAL INSTALLATION SHOULD BE CHECKED.
Buy It Now
$12.95 Shipping Condition: New Location: Saint Louis, United States HTK1- HOME TAP KIT Converts a standard refrigerator into a beer dispenser. Kit includes: 1. New commericial grade double gauge co2 regulator. This is ... morethe same regulator used by most Beer Distributors. It has a 55-65 psi safety, inlet filter, self seal inlet ring and pressure adjusting screw. 2. U. S. Sankey lever handle Coupler that will accept all U. S. domestic beers. 3. Deluxe Polished Chrome faucet with Brass Lever. 4. Black Plastic Faucet Knob. 5. Pressure Line Assembly( 5 feet of 5/16 Red Pressure Tubing and Two Plastic Clamps. 6. Beer Line Assembly( 5 Feet of F. D. A. Brewery Approved 3/16 Clear Beer Tubing with Attached Tail Piece and Hex Nut, Washer, Plastic Clamp. 7. 5 1/8" Nipple Shank Assembly. 8. Spanner wrench. 9. Directions. Shipping on this auction will be $9.95. Insurance included up to $100.00. We do not ship outside the USA. We accept PAYPAL only for payment. For any questions before you buy, please contact us at 1-800-282-3384. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Free Shipping Condition: New Location: Denver, United States The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A convenient knob style pressure dial that ... morecan be adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines.
Buy It Now
Free Shipping Condition: New Location: Denver, United States Stout Beer Faucet Coffee Faucet Nitro Snap Tap Lock, 304 Food Grade Stainless Steel Nitrogen Keg Faucet, 304 Stainless Steel Beer Keg Faucet Handle，Sturdy ... moreNo Leaks. 【SAFE MATERIAL】 : This Stout Beer Faucet Made Of Food Grade 304 Stainless Steel, No Harm To The Human Body, And Not Easy To Rust, Very Durable, Will Last Longer Than Brass Faucets.
|
|
|
|
USED CLEVELAND TAPER SHANK DRILL #2 41/64" X 8-7/8" OAL HSS USA 1221
YOU ARE BIDDING ON ONE USED CLEVELAND TAPER SHANK DRILL#2 41/64" X 8-7/8" OAL HSS USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
WELDON QA 50 SHANK TOOL ARBOR 3/8" ENDMILL HOLDER END MILL QH-2 LOT C2222
LOT C2222 WE ARE OFFERING A WELDON QA 50 SHANK TOOL ARBOR 3/8" ENDMILL HOLDER QH-2A WE HAVE MANY MORE OF THESE HOLDERS LISTED. YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES PLEASE check out my other items! Be sure to add me to your favorites list! ANY QUESTIONS CALL 937-320-2298
|
|
|
WELDON QA 50 SHANK TOOL ARBOR 3/8" ENDMILL HOLDER END MILL QH-2 LOT C2233
LOT C2233 WE ARE OFFERING A WELDON QA 50 SHANK TOOL ARBOR 3/8" ENDMILL HOLDER QH-2A WE HAVE MANY MORE OF THESE HOLDERS LISTED. YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES PLEASE check out my other items! Be sure to add me to your favorites list! ANY QUESTIONS CALL 937-320-2298
|
|
|
WELDON QA 50 SHANK TOOL ARBOR 1/2" ENDMILL HOLDER END MILL QH-3 LOT C2248
LOT C2248 WE ARE OFFERING A WELDON QA 50 SHANK TOOL ARBOR 1/2" ENDMILL HOLDER QH-3 WE HAVE MANY MORE OF THESE HOLDERS LISTED. YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES PLEASE check out my other items! Be sure to add me to your favorites list! ANY QUESTIONS CALL 937-320-2298
|
|
|
WELDON QA 50 SHANK TOOL ARBOR 1/2" ENDMILL HOLDER END MILL QH-3 LOT C2249
LOT C2249 WE ARE OFFERING A WELDON QA 50 SHANK TOOL ARBOR 1/2" ENDMILL HOLDER QH-3 WE HAVE MANY MORE OF THESE HOLDERS LISTED. YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES PLEASE check out my other items! Be sure to add me to your favorites list! ANY QUESTIONS CALL 937-320-2298
|
|
|
WELDON QA 50 SHANK TOOL ARBOR 3/8" ENDMILL HOLDER END MILL QH-2 LOT C2234
LOT C2234 WE ARE OFFERING A WELDON QA 50 SHANK TOOL ARBOR 3/8" ENDMILL HOLDER QH-2A WE HAVE MANY MORE OF THESE HOLDERS LISTED. YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES PLEASE check out my other items! Be sure to add me to your favorites list! ANY QUESTIONS CALL 937-320-2298 On May-03-13 at 14:33:30 PDT. Seller added the following information:
|
|
|
WELDON QA 50 SHANK TOOL ARBOR 3/8" ENDMILL HOLDER END MILL QH-2 LOT C2232
LOT C2232 WE ARE OFFERING A WELDON QA 50 SHANK TOOL ARBOR 3/8" ENDMILL HOLDER QH-2A WE HAVE MANY MORE OF THESE HOLDERS LISTED. YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES PLEASE check out my other items! Be sure to add me to your favorites list! ANY QUESTIONS CALL 937-320-2298
|
|
|
WELDON QA 50 SHANK TOOL ARBOR 1/2" ENDMILL HOLDER END MILL QH-3 LOT C2250
LOT C2250 WE ARE OFFERING A WELDON QA 50 SHANK TOOL ARBOR 1/2" ENDMILL HOLDER QH-3 WE HAVE MANY MORE OF THESE HOLDERS LISTED. YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES PLEASE check out my other items! Be sure to add me to your favorites list! ANY QUESTIONS CALL 937-320-2298
|
|
|
WELDON QA 50 SHANK TOOL ARBOR 3/8" ENDMILL HOLDER END MILL QH-2 LOT C2227
LOT C2227 WE ARE OFFERING A WELDON QA 50 SHANK TOOL ARBOR 3/8" ENDMILL HOLDER QH-2A WE HAVE MANY MORE OF THESE HOLDERS LISTED. YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES PLEASE check out my other items! Be sure to add me to your favorites list! ANY QUESTIONS CALL 937-320-2298
|
|
|
SOMMA TOOL RSS3 REVOLVING STOCK STOP 1-1/2" SHANK
SOMMA TOOL REVOLVING STOCK STOP MADE IN USA PART NO. RSS3 1-1/2" DIA. SHANK Very good used condition. As pictured. Payment due within seven days after auctions ends. Check. M/o, or PayPal accepted. $10.50 for USPS Priority Mail shipping with delivery confirmation. Thanks for looking!
|
|
|
Used Magic Chuck #4 Master Holder with 4MT shank Holds 2-3/8'' Collets Collis
LISTING IS FOR A USED MAGIC CHUCK MASTER HOLDER BRAND- COLLIS PART# 63744 CHUCK SIZE- 4 COLLET HOLE DIAMETER- 2-3/8" SHANK- 4M T CONDITION- GOOD USE D SOME SURFACE RUST PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN ... moreEXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAVE A
|
|
|
2 USED, SHARP STRAIGHT SHANK HSS TWIST DRILLS 13.80mm (.5433") high Speed
LISTING IS FOR 2 USED HSS TWIST DRILLS MADE IN THE USA DIAMETER- 13.80mm(5433" FLUTE LENGTH- 4.00" OAL- 8.00" CONDITION- GOOD USED DRILLS ARE SHARP Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, ... moreAMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAVE
|
|
|
Taco SDG-2 Self Opening De Head with Chasers 9/16" 1" Shank
Description Taco SDG-2 Self Opening De Head with Chasers 9/16" 1" Shank Good Working& Cosmetic Condition Comes with Everything Shown Payment Payment must be made within 3 days of purchase. To pay by Visa/MC please call 973-610-2326. Terms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools and metalworking equipment. precision inspection equipment. testing and measurement ... moreequipment. construction equipment.and more. We are committed to 5-star service. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions.
|
|
|
TECHNIKS ER11 Collet Chuck 1/2" Shank Diameter
ebay template TECHNIKS ER11 Collet Chuck 1/2" Straight Shank SPECIFICATIONS catalog number collet series D D11 L lbs 1/2"xER11M-140 ER11 1/2" 0.63" 6.25" 25*Specifications subject to verification Payment We accept Check. Credit Card, or PayPal. We accept all major credit cards except American Express. Payment is due within 5 days of purchase. Orders are not processed until they’re paid in full. Our invoice will include a subtotal of item(s) purchased. Sales tax for in-state purchases[CA] and a rigging/packaging charge if applicable. Please wait for a complete invoice with estimated shipping price before sending payment. Machinery Exchange reserves the right to open an Unpaid Dispute against buyers who do not pay or contact us in regards to payment. Machinery Exchange reserves the right to re-list or re-sell a purchased ... moreitem if we do not receive payment. Terms Listed Items- Items listed on eBay are available for immediate purchase through our showroom as they are advertised through various trade publications. This item is subject to prior sale. We reserve the right to end an auction early if the item sells through another outlet. We will not end an auction if it has less than eight hours remaining or the item reserve has been met. Machinery Turn-around Time- Your order is processed after it is paid for in full. Average turn-around time varies depending on the item you have purchased. Many factors come in to play when purchasing industrial equipment. Machines must be'blocked' for shipment before they can be removed from our showroom and loaded on to a freight truck. We hire an outside technician to prepare the machine for shipment. Machinery movers may also be contracted to remove the machine from our showroom and load it on to a freight truck. Our turn-around time depends on the schedules of these outside sources. Generally an item can be ready to ship within five business days of purchase. Please contact us if you need detailed information on this items availability. We will do ou
|
|
|
HERTEL ER11 Collet Chuck 1/2" Shank Diameter
ebay template H ERTEL ER11 Collet Chuck 1/2" Straight Shank SPECIFICATIONS catalog number collet series D D11 L lbs HSS050ER11400 ER11 1/2" 0.63" 4.00" 6*Specifications subject to verification Payment We accept Check. Credit Card, or PayPal. We accept all major credit cards except American Express. Payment is due within 5 days of purchase. Orders are not processed until they’re paid in full. Our invoice will include a subtotal of item(s) purchased. Sales tax for in-state purchases[CA] and a rigging/packaging charge if applicable. Please wait for a complete invoice with estimated shipping price before sending payment. Machinery Exchange reserves the right to open an Unpaid Dispute against buyers who do not pay or contact us in regards to payment. Machinery Exchange reserves the right to re-list or re-sell a purchased item ... moreif we do not receive payment. Terms Listed Items- Items listed on eBay are available for immediate purchase through our showroom as they are advertised through various trade publications. This item is subject to prior sale. We reserve the right to end an auction early if the item sells through another outlet. We will not end an auction if it has less than eight hours remaining or the item reserve has been met. Machinery Turn-around Time- Your order is processed after it is paid for in full. Average turn-around time varies depending on the item you have purchased. Many factors come in to play when purchasing industrial equipment. Machines must be'blocked' for shipment before they can be removed from our showroom and loaded on to a freight truck. We hire an outside technician to prepare the machine for shipment. Machinery movers may also be contracted to remove the machine from our showroom and load it on to a freight truck. Our turn-around time depends on the schedules of these outside sources. Generally an item can be ready to ship within five business days of purchase. Please contact us if you need detailed information on this items availability. We will do our best t
|
|
|
KENNAMETAL ER11 Collet Chuck 1/2" Shank Diameter
ebay template ER11 Collet Chuck 1/2" Straight Shank SPECIFICATIONS catalog number collet series D D11 L lbs SS050ER11700 ER11 1/2" 0.63" 7.00" 26*Specifications subject to verification Payment We accept Check. Credit Card, or PayPal. We accept all major credit cards except American Express. Payment is due within 5 days of purchase. Orders are not processed until they’re paid in full. Our invoice will include a subtotal of item(s) purchased. Sales tax for in-state purchases[CA] and a rigging/packaging charge if applicable. Please wait for a complete invoice with estimated shipping price before sending payment. Machinery Exchange reserves the right to open an Unpaid Dispute against buyers who do not pay or contact us in regards to payment. Machinery Exchange reserves the right to re-list or re-sell a purchased item if we ... moredo not receive payment. Terms Listed Items- Items listed on eBay are available for immediate purchase through our showroom as they are advertised through various trade publications. This item is subject to prior sale. We reserve the right to end an auction early if the item sells through another outlet. We will not end an auction if it has less than eight hours remaining or the item reserve has been met. Machinery Turn-around Time- Your order is processed after it is paid for in full. Average turn-around time varies depending on the item you have purchased. Many factors come in to play when purchasing industrial equipment. Machines must be'blocked' for shipment before they can be removed from our showroom and loaded on to a freight truck. We hire an outside technician to prepare the machine for shipment. Machinery movers may also be contracted to remove the machine from our showroom and load it on to a freight truck. Our turn-around time depends on the schedules of these outside sources. Generally an item can be ready to ship within five business days of purchase. Please contact us if you need detailed information on this items availability. We will do our best to expedi
|
|
|
Rotating Bar Stop from W&S Co. w/ 1-1/2" Shank #M-1458
Rotating Bar Stop from W&S Co. w/ 1-1/2" Shank#M-1458, Click to View Image Album Click to View Image Album Rotates freely but the bearing feels a little rough. Probably can be slammed by an air bar feed at least 50.000 more times before it needs overhauling. Warner& Swasey Co. M-1458 We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter service rates. That means we are shipping at the lowest rates UPS offers. If we ship to a stand alone business the UPS rate is usually $2.50 less. If your business ... morehas a separate driveway entrance from any residence; state that and request the B to B rate. two. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR. Formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we have a difficult to package or extra heavy item and there will be a packing charge listed in the auction. If you are bidding on any item that weighs more then 150 lbs. you can be sure the shipping quote listed is incorrect. eBay doesn't allow our auction listing service the ability to put motor feight costs into the shipping column. Payment Call(949) 294-2171 and we will process commercial sal
|
|
|
Groving Tool Manchester Adjustable 1 1/2" Shank, nice for cnc turret, # T-1180A
Manchester Adjustable Groving Tool 1 1/2" Shank. Number on Head# T-1180A, Real nice usable condition. Selling as is. Free shipping in USA ONLY
|
|
|
8.2 MM EXTENDED DRILL #1 MORSE TAPER SHANK 9 7/8" #7988
DESCRIPTION: 8.2 MM EXTENDED DRILL#1 MORSE TAPER SHANK OVERALL LENGTH APPROX. 9 7/8" USED BUT APPEARS TO BE IN GREAT SHAPE. SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. We have many years in the machine tooling industry but we don't know everything. If a mistake is made on any of our listings. It is unintentional and no fraud or misrepresentation is ever intended. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer unless otherwise stated in the ad. 3: We do offer a money back ... morerefund. The item must be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 4: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. We do inspect all items prior to listing but are unable to test some items at our location. 5: When we say it is NEW; It will be never used or old stock. 6 Concerning calibration of items; no items are calibrated unless otherwise noted. 7: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. F
|
|
|
GEOMETRIC 9/16 DS THREADING HEAD, 5/8"" shank Bump or Pull off W/1/2" 13 chasers
Alining type W/1/2" 13 and 1/2" 20 projection chasers believe to be new. Shank has a set screw in it for a stop, has a strong spring and head works good
|
|
|
SOMMA No. 2 1" Shank, 1" Toolholder W/ 1/2" Collet Tool Holder
Used in good condition. With 1/2" split collet;
|
|
|
USED DIE HEAD 3-1/2" DIAMETER HEAD 1-1/4" SHANK 1229
YOU ARE BIDDING ON ONE USED DIE HEAD 3-1/2" DIAMETER HEAD 1-1/4" SHANK CHASERS MEASURE 1-5/16" OAL X.466 THICK X.925 DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Lot of 10 used MORSE TAPER SHANK DRILLS lathe mill drilling tools13/64 to1/2 16A
This auction is for 1 Lot of 10 used MORSE TAPER SHANK DRILLS lathe mill drilling tools Best Offers Responded to within 24 hours. We are a seller and buyer of industrial equipment with over 35 years experience. Purchase our products with confidence. If you are not satisfied returns are gladly accepted. Contact us about all of your industrial equipment needs: All best offers on Ebay will be responded to within 24 hours. Thanks for looking! My Policies: 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and we will try to work it out with you. We usually ship the next business day after payment is received. We also offer Expedited shipping on all products. Look under shipping options near the top of the page. We reserve the right to ship via the fastest and most affordable ... moremethod for our customers. We will always try to combine shipping. Although we will add a small supplies charge to each shipment to cover costs. Checkout my feedback and buy with confidence! No liability expressed or implied on installation or suitability for a particular use. Visit our Ebay stores for more great items and ProStores website at WWW.INDUSTRIALSURPLUSSTUFF.COM Pictures are typical of the units described. I DISCLAIM ANY WARRANTY OF SUITABILITY FOR A PARTICULAR PURPOSE AND/OR NON-INFRINGEMENT. IN NO EVENT SHALL I BE LIABLE FOR ANY DAMAGES EXCEPT ACTUAL DAMAGES UP TO. BUT NOT EXCEEDING, THE AMOUNT PAID TO ME FOR THE PRODUCT, INCLUDING: I SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INDIRECT DAMAGES OR LOST PROFITS WHETHER OR NOT ADVISED OF SAME. I am not a distributor of original manufacturers and I am not a party to any manufacturers warranty that may or may not apply. Another auction from Surplus and Used Electrical Stuff. Powered by
|
|
|
Lot of 2 MORSE TAPER SHANK DRILL BIT lathe mill tool USA 9/16 metil Drill Bits
This auction is for 1 Two 9/16 metil Drill Bits Best Offers Responded to within 24 hours. We are a seller and buyer of industrial equipment with over 35 years experience. Purchase our products with confidence. If you are not satisfied returns are gladly accepted. Contact us about all of your industrial equipment needs: All best offers on Ebay will be responded to within 24 hours. Thanks for looking! My Policies: 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and we will try to work it out with you. We usually ship the next business day after payment is received. We also offer Expedited shipping on all products. Look under shipping options near the top of the page. We reserve the right to ship via the fastest and most affordable method for our customers. We will ... morealways try to combine shipping. Although we will add a small supplies charge to each shipment to cover costs. Checkout my feedback and buy with confidence! No liability expressed or implied on installation or suitability for a particular use. Visit our Ebay stores for more great items and ProStores website at WWW.INDUSTRIALSURPLUSSTUFF.COM Pictures are typical of the units described. I DISCLAIM ANY WARRANTY OF SUITABILITY FOR A PARTICULAR PURPOSE AND/OR NON-INFRINGEMENT. IN NO EVENT SHALL I BE LIABLE FOR ANY DAMAGES EXCEPT ACTUAL DAMAGES UP TO. BUT NOT EXCEEDING, THE AMOUNT PAID TO ME FOR THE PRODUCT, INCLUDING: I SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INDIRECT DAMAGES OR LOST PROFITS WHETHER OR NOT ADVISED OF SAME. I am not a distributor of original manufacturers and I am not a party to any manufacturers warranty that may or may not apply. Another auction from Surplus and Used Electrical Stuff. Powered by
|
|
|
Lot of 2 MORSE TAPER SHANK DRILL BIT lathe mill tool USA 11/16 16-A-7805-B
This auction is for 1 Drill Bit 11/16 16-A-7805-B Best Offers Responded to within 24 hours. We are a seller and buyer of industrial equipment with over 35 years experience. Purchase our products with confidence. If you are not satisfied returns are gladly accepted. Contact us about all of your industrial equipment needs: All best offers on Ebay will be responded to within 24 hours. Thanks for looking! My Policies: 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and we will try to work it out with you. We usually ship the next business day after payment is received. We also offer Expedited shipping on all products. Look under shipping options near the top of the page. We reserve the right to ship via the fastest and most affordable method for our customers. We will ... morealways try to combine shipping. Although we will add a small supplies charge to each shipment to cover costs. Checkout my feedback and buy with confidence! No liability expressed or implied on installation or suitability for a particular use. Visit our Ebay stores for more great items and ProStores website at WWW.INDUSTRIALSURPLUSSTUFF.COM Pictures are typical of the units described. I DISCLAIM ANY WARRANTY OF SUITABILITY FOR A PARTICULAR PURPOSE AND/OR NON-INFRINGEMENT. IN NO EVENT SHALL I BE LIABLE FOR ANY DAMAGES EXCEPT ACTUAL DAMAGES UP TO. BUT NOT EXCEEDING, THE AMOUNT PAID TO ME FOR THE PRODUCT, INCLUDING: I SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INDIRECT DAMAGES OR LOST PROFITS WHETHER OR NOT ADVISED OF SAME. I am not a distributor of original manufacturers and I am not a party to any manufacturers warranty that may or may not apply. Another auction from Surplus and Used Electrical Stuff. Powered by
|
|
|
Lot of 2 MORSE TAPER SHANK DRILL BIT lathe mill tool USA 13/16
This auction is for 1 Two 13/16 Metil Drill bit Best Offers Responded to within 24 hours. We are a seller and buyer of industrial equipment with over 35 years experience. Purchase our products with confidence. If you are not satisfied returns are gladly accepted. Contact us about all of your industrial equipment needs: All best offers on Ebay will be responded to within 24 hours. Thanks for looking! My Policies: 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and we will try to work it out with you. We usually ship the next business day after payment is received. We also offer Expedited shipping on all products. Look under shipping options near the top of the page. We reserve the right to ship via the fastest and most affordable method for our customers. We will ... morealways try to combine shipping. Although we will add a small supplies charge to each shipment to cover costs. Checkout my feedback and buy with confidence! No liability expressed or implied on installation or suitability for a particular use. Visit our Ebay stores for more great items and ProStores website at WWW.INDUSTRIALSURPLUSSTUFF.COM Pictures are typical of the units described. I DISCLAIM ANY WARRANTY OF SUITABILITY FOR A PARTICULAR PURPOSE AND/OR NON-INFRINGEMENT. IN NO EVENT SHALL I BE LIABLE FOR ANY DAMAGES EXCEPT ACTUAL DAMAGES UP TO. BUT NOT EXCEEDING, THE AMOUNT PAID TO ME FOR THE PRODUCT, INCLUDING: I SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INDIRECT DAMAGES OR LOST PROFITS WHETHER OR NOT ADVISED OF SAME. I am not a distributor of original manufacturers and I am not a party to any manufacturers warranty that may or may not apply. Another auction from Surplus and Used Electrical Stuff. Powered by
|
|
|
1-15/16" Dia. 1-1/2" straight shank FLAT BOTTOM cutting bottoming cut drill bit
Item. Large Straight Shank Bottoming twist Drill Bit Manufacturer. DTC Company Diameter. 1.937" Shank Size. 1-1/2" Round straight with a Flat edge for a set screw Overall Length. 8" Flute Length. Will pull chips out through 5" Type. 2 Flute hs hss high speed steel We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping ... moreamount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9395
|
|
|
EIGHT #2 MORSE TAPER SHANK DRILLS - 9/16" TO 49/64"
aims EIGHT#2 MORSE TAPER SHANK DRILLS- 9/16" TO 49/64" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 8 used Taper Shank HSS Drills in good condition. Specifications: Drill Sizes Range: 9/16" to 25/32" Shank Sizes: 2 Morse Taper. Lengths of Cut Range: 2-1/4" to 5" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. EIGHT#2 MORSE TAPER SHANK DRILLS- 9/16" TO 49/64" Reliable Tool Inc. c 2011 | Powered by
|
|
|
CHECK THIS! CRITERION 1/2" BORING HEAD - #DBL-202 WITH R8 SHANK
Search Titles and Descriptions Categories Policies Gallery CHECK THIS! CRITERION 1/2" BORING HEAD- DBL-202 WITH R8 SHANK CHECK THIS! CRITERION 1/2" BORING HEAD- DBL-202 WITH R8 SHANK CHECK THIS! CRITERION 1/2" BORING HEAD- DBL-202 WITH R8 SHANK CHECK THIS! CRITERION 1/2" BORING HEAD- DBL-202 WITH R8 SHANK CHECK THIS! CRITERION 1/2" BORING HEAD- DBL-202 WITH R8 SHANK CHECK THIS! CRITERION 1/2" BORING HEAD- DBL-202 WITH R8 SHANK CHECK THIS! CRITERION 1/2" BORING HEAD- DBL-202 WITH R8 SHANK Boring head and shank are in very good physical condition but I can't guarantee shank's concentricity. Here is a small head that will be in constant demand in any shop. Note the wide base bearing surface that assures maximum rigidity even when the bar holder is in an offset position. This wide base design is a Criterion ... moreinnovation that increases bearing surfaces by 50% over older models. Specifications Dial Movement: 0.001" per diameter divisions. Head Diameter: 3. Overall Head Length: 2-13/32" Boring Bar Hole Size: 1/2" Center Distance Between Holes: 5/8" Cross Hole Diameter: 1/2" Offset: 5/8" Shank: R8. Item comes as shown. Copyright c 2012 Bid On Industrial. Powered by
|
|
|
CRITERION S - 1 1/2A BORING HEAD WITH 1/2" SHANK
Selling this boring tool made by Criterion Closed up the shop several years ago and I am still cleaning up.
|
|
|
CRITERION S-3 BORING HEAD 1 1/2" STRAIGHT SHANK WOW
CRITERION S-3 BORING HEAD 1 1/2" STRAIGHT SHANK WOW Criterion S-3 BORING HEAD 1 1/2" STRAIGHT SHANK 4 1.2" LONG 1" CAPACITY HOLE WITH INSERT IN VERY GOOD CONDITION PLEASE EMAIL WITH ANY QUESTIONS All purchases are expected to be paid within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Addresses. International buyers are responsible for payment of any taxes and tariffs levied by their government. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE PLEASE CONTACT US 718-370-3275 WE ARE LOCATED ... moreAT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-FRI. 8AM TO 4PM SAT. YOU CAN CONTACT CUSTOMER SERVICE@ 718-370-3275
|
|
|
CARBOLOY INDEXABLE BORING BAR W/ 1/2" SHANK & 4 INSERTS - #SI-SDJCR-8-2
aims CARBOLOY INDEXABLE BORING BAR W/ 1/2" SHANK& 4 INSERTS- SI-SDJCR-8-2 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Carboloy. This is an Indexable Boring Bar with 4 Inserts in good condition. Model# SI-SDJCR-8-2 Specifications: Bore Diameter: 487" Shank: 1/2" Overall Length: 5-1/4" Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CARBOLOY INDEXABLE BORING BAR W/ 1/2" SHANK& 4 INSERTS- SI-SDJCR-8-2 Reliable Tool Inc. c 2011 | Powered by
|
|
|
USED KENNAMETAL KENBORE B8620 BORING BAR With BORING HEAD (2-1/2"-Shank) TNMG
LISTING IS FOR A USED KENNAMETAL KENBORE BORING BAR BRAND- KENNAMETAL KENBORE MADE IN THE USA PART# B8620 SHANK SIZE- 2.50" ONE BORING HEAD IS INCLUDE D HEAD IS IN POOR CONDITION AND NE EDS REBUILT HEAD IS ALSO MISSING THE SHIM BORING HEAD PART# A2 03 2 USES INSERTS- T NMG(NOT INCLUDED) CONDITION- BAR IS IN GOOD USED CONDITI ON HEAD IS IN POOR CON DITION AND NEEDS REBUILT HEA D IS ALSO MISSING THE SHIM Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS ... moreAT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESS
|
|
|
SANDVIK BALAS C12 FLEXI-GRIP COLLET CHUCK W/ COLLET 1-1/2" SHANK
SANDVIK/ BALAS C12 FLEXI-GRIP COLLET CHUCK PART NO. S14-6"C12 1-1/2" SHANK. 1-1/4" COLLET INCLUDED Good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, credit card, or PayPal accepted. Winning bidder to add $11.50 for USPS Priority Mail shipping with delivery confirmation. Thanks for looking!
|
|
|
Sutton DT4 2-12 Tap Tapping arbor, 1 1/2" OD shank, wt tapping blade BSP 3" x11
For sales is one pcs excellent condition Sutton DT4 2-12 Tap Tapping arbor. With 1 1/2" OD shank, Comes installed with one set tapping blades(6pcs/set) size BSP 3" x 11. Bottom type. Welcomed to visit my ebay shop: toolingstation. Combined postage provided. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-13e6e9772f0-0xf4-
|
|
|
EXTENSION SLEEVE MALE #2 MORSE TAPER SHANK TO FEMALE #2 MORSE STUB #9498
DESCRIPTION: EXTENSION SLEEVE MALE#2 MORSE TAPER SHANK TO A FEMALE#2 MORSE TAPER SOCKET RMS 310-2211 5-1/4" LONG USED; MAY SHOW SIGNS OF USE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1 business day. Shipping charges are the responsibility of the buyer. We do offer a money back refund. The item must be received back in its original condition and we must be notified through eBay messages within 14 days of receiving item. Shipping fees are non-refundable. Customer satisfaction is very important to us. Please email us with any issue you may PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident ... moreor consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
KOMET ABS 50 2-1/2" SHANK MASTER TOOL HOLDER
KOMET ABS 50 MASTER HOLDER PART NO. ABS 50N TC2.5-5 2-1/2" DIAMETER SHANK Very good used condition. As pictured. Payment due within ten days after auctions ends. Check. M/o, or PayPal accepted. Winning bidder to add $11.50 for USPS Flat Rate Priority Mail shipping with delivery confirmation. Thanks for looking!
|
|
|
LOT OF 2 ENDMILL HOLDERS R8 SHANK 3/4" & 1-1/4"
aims LOT OF 2 ENDMILL HOLDERS R8 SHANK 3/4" 1-1/4" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a lot of 2 Endmill Holders with R8 Shank in good condition. Specifications: Capacitiy: 3/4" 1-1/4" Shank: R8. Overall Lengths: 6-1/4" 7" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF 2 ENDMILL HOLDERS R8 SHANK 3/4" 1-1/4" Reliable Tool Inc. c 2011 | Powered by
|
|
|
#5MT Shank 1/2 Endmill Holder (my ID-G6)
Buyer to assume all shipping cost. I do combine shipping so shop for more and save some on shipping. Happy Bidding
|
|
|
BALAS SANDVIK C8 FLEXI-GRIP COLLET CHUCK 2" SHANK
SANDVIK/ BALAS FLEXI-GRIP COLLET CHUCK PART NO. S16-6"C8-1 2" STRAIGHT SHANK. MULTIPLE LISTING. WE GLADLY COMBINE SHIPPING COST! Very good used condition. Payment due within ten days after auctions ends. Check. M/o, or PayPal accepted. Winning bidder to add $10.50 for USPS Priority Mail shipping with delivery confirmation. We gladly combine shipping on multiple items purchased! Thanks for looking!
|
|
|
3/8' ID CNC TOOL HOLDING BUSHINGS 1-1/2" STRAIGHT SHANK WITH GROOVE
ID CNC TOOL HOLDING BUSHINGS 1-1/2" STRAIGHT SHANK WITH GROOVE 3-3/4" LONG WITH 2-1/4 SCREWS TO CLAMP DIRECTLY ON TO DRILL BUSHING IS STAMPED 85721 ON FACE TYPE BUSHING IS UNKNOWN WAS USED MABEY 1 OR 2 TIMES
|
|
|
TAPMATIC RIVERSIBLE TAPPING ATTACHMENT w/ 1/2" SHANK - #100XB
aims TAPMATIC RIVERSIBLE TAPPING ATTACHMENT w/ 1/2" SHANK- 100XB read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in U.S.A. by Tapmatic. This is a Reversible Tapping Attachment in good condition. Model# 100XB Features: TAPMATIC The World Standard For Manual Tapping Applications. Greater Thread Accuracy. Higher Production. Consistent Trouble Free Performance. Self-Reversing Tapping Units For Manually. Operated Drilling And Milling Machines. Pre-Selective Torque Drive: Prevents tap breakage. 1.75 x 1 Reverse Ratio: Increases productivity. Self-Feed: Ensures gauge perfect threads. Re-Entry Cushion: Eliminates cross-threading. Specifications: Capacity: M0.5-M2. Rubber-flex Collet: 9/64" Max. RPM: 2.000. Shank: 1/2" Straight. Overall Length: 5-1/4" Comes as shown in ... morepictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. TAPMATIC RIVERSIBLE TAPPING ATTACHMENT w/ 1/2" SHANK- 100XB Reliable Tool Inc. c 2011 | Powered by
|
|
|
U.S.A!! 4 NIAGARA / OTHERS HSS CORNER ROUNDING ENDMILLS WITH 1/2" SHANK
aims U.S.A! 4 NIAGARA/ OTHERS HSS CORNER ROUNDING ENDMILLS WITH 1/2" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Niagara. Melin. These are 4 HSS Corner Rounding Endmills in good condition. Specifications: Sizes: 1/4" 1/2" 1/8" 1/16" Shank Size: 1/2" Overall Length: 3-5/8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A! 4 NIAGARA/ OTHERS HSS CORNER ROUNDING ENDMILLS WITH 1/2" SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
U.S.A!! 4 BRUBAKER / OTHERS HSS CORNER ROUNDING ENDMILLS WITH 1/2" SHANK
aims U.S.A! 4 BRUBAKER/ OTHERS HSS CORNER ROUNDING ENDMILLS WITH 1/2" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Brubaker. Quinco. These are 4 HSS Corner Rounding Endmills in good condition. Specifications: Sizes: 1/8" 5/16" 1/2" 1/4" Shank Size: 1/2" Overall Length: 3-5/8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. U.S.A! 4 BRUBAKER/ OTHERS HSS CORNER ROUNDING ENDMILLS WITH 1/2" SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
KOMET 2" Indexable insert Drill UV5704060 with 1-1/2" Shank. Used
KOMET 2" Indexable insert Drill#UV5704060 with 1-1/2" Shank Looks like it can drill to aprox 2-1/2" deep. Total length of drill is 8-3/4" Used working condition You get the tool just as you see it in the pictures. Posted with
|
|
|
COOLANT FED INDEXABLE SPADE DRILL TOOL HOLDER w/ 1-1/2" SHANK - 2.434" DIA.
aims COOLANT FED INDEXABLE SPADE DRILL TOOL HOLDER w/ 1-1/2" SHANK- 2.434" DIA. read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Coolant Fed Indexable Spade Drill Holder in good condition. Features: Used for deep hole drilling. Specifications: Current Cutting Diameter: 2.434" Shank: 1-1/2" round) Flute Length: 4" Overall Length: 7-3/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. COOLANT FED INDEXABLE SPADE DRILL TOOL HOLDER w/ 1-1/2" SHANK- 2.434" DIA. COOLANT FED INDEXABLE ... moreSPADE DRILL TOOL HOLDER w/ 1-1/2" SHANK- 2.434" DIA. Reliable Tool Inc. c 2011 | Powered by
|
|
|
Three 5/8" Shank Boring Bars S10R-SCLCR 2 SANDVIK. Used
Three 5/8" Shank Boring Bars S10R-SCLCR 2 One of the three bars is marked Sandvik. No names on the other two All are in well used condition. All of the bars had their shanks cut short. They have a total length of aprox 3-7/8" to 4-7/8" log You get it just as you see in the pictures Posted with
|
|
|
Four 1/2" Shank Boring Bars S08M-SCLCR 2 SANDVIK. Used
Four 1/2" Shank Boring Bars S08M-SCLCR 2 SANDVIK. Used Three of the four bars are marked SANDVIK All are in well used condition. Two of the bars had their shanks cut short Two bars were ground on. Looks like to make the head thinner You get the inserts that are in the pictures You get it just as you see in the pictures Posted with
|
|
|
Four 3/8" Shank Boring Bars A06M-SCLCR 2 SANDVIK. Used
Four 3/8" Shank Boring Bars A06M-SCLCR 2 Three of the four bars are marked SANDVIK All are in well used condition. Three of the bars had their shanks cut short Three bars were ground on. Looks like to make the head thinner You get the inserts that are in the pictures You get it just as you see in the pictures Posted with
|
|
|
1/2" Shank Boring Bar SANDVIK Coromant S08M-SCLCR. 2.
1/2" Shank Boring Bar SANDVIK Coromant S08M-SCLCR. 2. Very good condition. Looks like it was never used Total length is aprox 6" You get it just as you see in the pictures Posted with
|
|
|
3/8" Shank Boring Bar SANDVIK Coromant S06M-SCLCL 2.
3/8" Shank Boring Bar SANDVIK Coromant S06M-SCLCL 2. Very good condition. Looks like it was never used Total length is aprox 6" You get it just as you see in the pictures Posted with 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13e6f6ce74e-0x101-
|
|
|
SOLID CARBIDE INDEXABLE BORING BAR W/ 1/2" SHANK & 9 INSERTS
aims SOLID CARBIDE INDEXABLE BORING BAR W/ 1/2" SHANK& 9 INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Solid Carbide Indexable Boring Bar with 9 inserts in good condition. Features: Excellent cutting performance in wide range of boring size even at vibration cutting condition. Applied for various workpiece such as steel. Stainless steel, cast iron, etc. Assures longer tool life and excellent surface finish. Specifications: Current Bore Diameter: 0.518" Approx. Shank: 1/2" Clamping System: Screw On. Overall Length: 4" Come as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by ... morevisiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SOLID CARBIDE INDEXABLE BORING BAR W/ 1/2" SHANK& 9 INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
Jacobs #33 Drill chuck N0. 2 MT shank includes Key - From personal tools
Jacobs#33 drill chuck Made in USA 5/64-1/2 inch capacity No. 2 Morse Taper shank(Jacobs brand) Excellent condition this is from my personal tools Includes Jacobs K32 chuck key Posted with
|
|
|
Nicola Chicago 2 Small Shank Trombone Mouthpiece Small Lead MPC
This is a used Ni cola Chicago 2 small shank trombone mouthpiece. This mouthpiece is in good condition. There are nicks. Scratches and insertion marks. The plating is missing from a few spots on the shank and the shank has a few splits.It is 2.8 inches long and appear to have been cut down. The ID is.970 and the rim is fairly wide. Looks to be a lead, jazz mouthpiece with a small cup. Photos have been taken from several angles to allow you to check condition. If you click the pictures. They will supersize for a better view. Please check my store for other auctions for brass mouthpieces and accessories. The mouthpieces I sell have been cleaned and polished. The backbore has been brushed out and the shanks have been trued. If needed. All mouthpieces receive a final cleaning and inspection before they are shipped. There is generally a good supply ... moreavailable in my store, so check back from time to time to see what is for sale. Mouthpieces are bagged. Wrapped in bubble wrap, and shipped in a padded mailer. Shipping is free in the United States. This will ship via First Class Package International for overseas sales. International buyers may have to pay VAT. Customs fees, local delivery charges, and the package could be held in customs for several weeks. There is no tracking for 1st Class International. You will receive a customs number, which may help you locate the package in customs. International shipping has taken as long as 6 weeks in a few cases. Please be patient and allow time for delivery. I will combine shipping on lots and only seek to get back my cost for supplies and postage. Check my feedback and bid in confidence. If you have any questions. They will be answered as soon as possible. I've been on eBay for 16 years and, after retiring, have found buying and selling here rather enjoyable. Your business is appreciated and I’ll do my best to provide you with 5 star service. Trips are made to the post office nearly every afternoon and will do my best to ship same day, if purchased before noon.
|
|
|
VALENITE LOC-A-DEX 2" DIA X 1-1/4" SHANK INDEXABLE END MILL W/ INSERTS
Valenite LOC-A-DEX Indexable End Mill 2" Dia x 1-1/4" Shank 3 Station Includes 8 Unused Carbide Inserts& 2 Spare locating pins Good Condition. Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
CRITERION 1/2" BORING HEAD W/ R8 SHANK - #DBL-202 ,set ,bar,1×1/2" adapter, read
1 PC'S.Criterion 1/2" Boring head DBL-202 1div.=.001dia. R-8 BRIDGEPORT SHANK 1PC'S R-8 ADAPTER to a 1×1/5" 1.499) straight shank. With flat With locking washer. Washer, bolt at back to fasten True taper to match R-8. Concentric turned This adapter does NOT have a anti rotation pin. but great for your other R-8 holders also, drill chucks,ettc, in reason. 1PC'S 1/2" boring bar. With interchangeable standard insert Almost 2" max reach I just need to wipe items with some oil.I'll guarantee the boring head works perfect, NOTE. the two outside set screws are for the gib, the one in the center is the one for adjusting the cutting dia.lock and unluck) their is some backlash even when they are new, always note your dial reading in cw or ccw position, if you over shoot by.001 go back opposite direction.01 then ... morereset. No instructions included, just in case you are new to a Criterion boring head) or disregard this Note, if I did not phrase it correctly. This combo pack boring head. And adapter for larger machines, saves you allot of flexibility between machines. Time and money saver. Posted with
|
|
|
VALENITE TENSION COMPRESSION TAP HOLDER W/ BT 40 SHANK & 2 TAP SENTRY HOLDERS
Valenite Tension Compression Tap Holders with BT-40 Shank Model 12-M-8 312-52-40BT Includes 2 1/2" Tap Sentry Holders Good Condition. Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
JACOBS .04" - 1/2" SUPER DRILL CHUCK 14N W/ 5/8" SHANK FREE SHIPPING
SquareTrade © AP6.0 JACOBS.04" 1/2" SUPER DRILL CHUCK 14N W/ 5/8" SHANK FREE SHIPPING You are bidding on a nice Jacobs Ball Bearing Super Chuck. Catalogue No. 14N with a 5/8" Diameter Straight Shank and key. The Jacobs Ball Bearing Super Chuck is specifically engineered for heavy-duty. Close tolerance production drilling. It is adaptable to a wide range of production drilling equipment, jig borers, milling machines, lathes and radials. Utilizing a ball thrust bearing to reduce friction in the chuck closing mechanism, it permits the application of more gripping force on drill shanks to maximize drilling torque under the most demanding machining conditions. Features One of the world's most accurate key type chucks. Chuck Capacity- 04 to 1/2" capacity#3 Jacob Taper Mount Jacobs taper held to better than.0002" ... moreaccuracy for best mating with the drill chuck Ball bearing construction maximizes gripping force and drilling accuracy. Jaws center-ground for absolute straightness and alignment. Jaws specially treated to ensure extended thread life and high gripping surface hardness. One-piece sleeve eliminates crack between driving teeth often found in other designs. Through-hardened sleeve teeth plus hardened nose and keyholes provide outstanding wear resistance. Fluted sleeve standard. Each chuck 100% inspected for performance and precision. For more information see: http:www.jacobschuck.com/images/products/JC-003%20Super%20Chuck%20Bearing%20No%20Crops.pdf We have over 300 BT& Cat 45 and 50 tool holders for sale- see my other auctions for great deals. I will fully guarantee this item- new cost over $300. We have lots of quality tools available- see my other auctions. Shipping in the Continental US is FREE- I have very competitive rates for our always welcomed International bidders. Thanks for looking! If you have any question on this item please call us at 1-800-826-3433(9- 5pm Eastern) Pay me securely with your Visa or MasterCard through PayPal! Powered by
|
|
|
CRITERION DBL-203 BORING HEAD 3/4" TOOL BORE BT 40 SHANK 1-1/2" 18 THREAD .001"
Criterion DBL-203 Boring Head.35" 11" Capacity BT-40 Shank 1-1/2"18 Threaded mounting hole in head 3/4" Boring Bar Hole 15/16" on Center 3/4" Cross Hole.001" Graduations Good Condition. Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
USED COGSDILL ROLL-A-FINISH BURNISHER R-2750 4MT SHANK 2.750'' 2-3/4''
LISTING IS FOR ONE BURNI SHER BRAND- COGSDILL ROLL-A- FINISH PART# R-2750 SIZE- 2.750' SHANK- 4MT OVE RALL LENGTH- 16.50' GOOD USED CON D ITION Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS ... moreAND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT HOLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAVE AT 1.800.535.
|
|
|
8 HSS DRILLS WITH #2 MT SHANK
aims 8 HSS DRILLS WITH#2 MT SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 8 used Taper Shank HSS Drills in good condition. Specifications: Drill Sizes Range: 15/32" to 23/32" Shank Sizes: 2 Morse Taper. Lengths of Cut Range: 1-1/2" to 3-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 8 HSS DRILLS WITH#2 MT SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
8 CLEVELAND AND OTHERS HSS DRILLS WITH #2 MT SHANK
aims 8 CLEVELAND AND OTHERS HSS DRILLS WITH#2 MT SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Cleveland and Other Manufacturers. These are 8 used Taper Shank HSS Drills in good condition. Specifications: Drill Sizes Range: 31/64" to 49/64" Shank Sizes: 2 Morse Taper. Lengths of Cut Range: 2-1/2" to 6-1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 8 CLEVELAND AND OTHERS HSS DRILLS WITH#2 MT SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
B&A Spline Shank Rotary Hammer Bit 1/2" x 17" Made in USA
Full refund minus shipping charges if the item is returned in same condition. SHIPPING COST WILL NOT BE REFUNDED 10% restocking fee will be charged. B&A Spline Shank Rotary Hammer Bit 1/2" x 17" F9 Made in USA Scratches, Blemishes Throughout Throughout From Previous Use Please View Photos For Farther Description. Includes Pictured Items Only o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13e751b7146-0xfe-
|
|
|
Jacobs Drill Chuck No. 6A 0"- 1/2" Capacity 33 Taper 3-1/2" Shank
This item is a Jacobs Drill Chuck. No. 6A 0" 1/2" capacity. 33 Taper 3-1/2" Shank Overall dimensions: 7" x 2-1/2" x 2-1/2" Key is not included. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent ... moreupon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All item
|
|
|
Jacobs 32B Drill Chuck 0 to 3/8" Capacity 1-5/8" Shank 1/2"-20 Threads
This listing is for a Jacobs 32B drill chuck. The chuck has a 0-3/8" drill bit capacity and a 1-5/8" shank. The chuck has 1/2"20 threads. Key is not included. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent ... moreupon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. IR B- SN
|
|
|
Jacobs 14N Ball Bearing Super Drill Chuck 0 to 1/2" Cap. 3" Shank 2 Morse Taper
This listing is for a Jacobs 14N ball bearing super drill chuck. The chuck has a 0-1/2" drill bit capacity and a 3" no. 2 Morse taper shank. Key is not included. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent ... moreupon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. IR B- SN.
|
|
|
PB Drill Chuck 1/2" Cap. 5/8" ID Shank Insert Hole
This listing is for a PB drill chuck. The chuck has a 1/2" drill bit capacity and a 5/8" diameter shank insert hole. Key is not included. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size ... moreof the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. IR B- SN. On Jan-08-13 at 09:52:08
|
|
|
LFA J33 Drill Chuck 0-1/2" Cap. 4" Shank No. 3 Morse Taper
This listing is for a LFA J33 drill chuck. The chuck has a 0-1/2" drill bit capacity and 4" no. 3 Morse taper shank. Key is not included. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size ... moreof the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. IR B- SN. On Jan-08-13 at 09:46:15
|
|
|
Jacobs Ball Bearing Super Chuck Model 8-1/2N 1/4" Capacity, 1/2" Straight Shank
Used 1/4" Jacobs Super Chuck with a new 1/2" shank Jacobs Arbor Capacity.04-1/4 Inches. 0-6.4MM A new chuck lists for $126.35 and the arbor is $18.20 Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime.
|
|
|
21/32 Twist Drill bit Morse Taper #2 Shank mt2 2mt SPLIT POINT TIP Made in USA
Item. Morse Taper Shank Twist Drill Bit for steel SPLIT POINTED Manufacturer. Some by C-L Chicago Latrobe. FB Tools, UB Twist Drill, National Twist Drill and LSI Lear Siegler Inc, all are Made in the US America Diameter. 21/32" Shank Size. Morse Taper#2 Overall Length. Ranges from 7" to 7-1/2" Type. 2 Flute hs hss high speed steel SPLIT POINT TIP Condition. Nice sharp used This is not an actual photo but it is pretty much identical to the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you ... moreare willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listi
|
|
|
2-1/2" Morse Taper 5 shank FLAT BOTTOM cutting bottoming cut drill bit mt5 USA
Item. Morse Taper Shank Bottoming twist Drill Bit Manufacturer. Cleveland Twist Drill Company Made in the US America Diameter. 2-1/2" Shank Size. Morse Taper#5 Overall Length. 11" Flute Length. Will pull chips out thru 3-3/4" Type. 2 Flute hs hss high speed steel We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping ... moreamount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9395 lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13e765b5b8a-0xf1-
|
|
|
4 MORSE TAPER SHANK 1 5/16" x 13 1/2" DRILL BIT lathe mill mt tool LSI USA
sharp used 4 morse taper shank drill- flatnose LSI USA 1 5/16" x 13 1/2" long please check my other auctions and happy bidding! we can combine several bits in a large USPS flatrate box for $16.85 to anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
4 MORSE TAPER SHANK 1 9/32" x 12 1/2" DRILL BIT lathe mill mt
sharp used 4 morse taper shank drill mfg not marked 1 9/32" x 12 1/2" long please check my other auctions and happy bidding! we can combine several bits in a large USPS flatrate box for $16.85 to anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13e765b5b86-0x106-
|
|
|
4 MORSE TAPER SHANK 1 9/32" x 14 1/2" DRILL BIT lathe mill mt UNION BUTTERFIELD
sharp used 4 morse taper shank drill Union Butterfield USA 1 9/32" x 14 1/2" long please check my other auctions and happy bidding! we can combine several bits in a large USPS flatrate box for $16.85 to anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
USED TAPER SHANK DRILL 57/64" X 9-1/4" X 5-1/4" FLUTE MT#2 HSS USA 1058
YOU ARE BIDDING ON ONE USED TAPER SHANK DRILL 57/64" X 9-1/4" X 5-1/4" FLUTE MT#2 HSS USA CLEVELAND DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
3/4" X 9 1/2" LONG REAMER STRIGHT SHANK DRILL LAHTE MILL LIGHTLY USED
LIGHTLY USED 3/4" X 9 1/2" LONG STRIGHT SHANK CHUCKABLE REAMER. IN VERY GOOD CODITION& VERY SHARP. CHECK MY OTHER ADS FOR MORE TOOLING. SALES& SHIPPING TO USA ONLY. PAYMENT DUE IN 24 HRS. I WILL SHIP NEXT DAY. THANK YOU.
|
|
|
HUGE Morse Taper Shank Boring Bar & (3) Carbide Tipped Bits, 2" dia x 16" Long
HUGE Morse Taper Shank Boring Bar& 3) used Carbide tipped Bits. The bar is approx. 2" diameter x 16" long. It is a straight cutting tool. The bar shaft is actually tapered slightly. 2" is the widest. The Morse Taper is a#5 with measurements of approx. 1 1/2" on the small end x 1 3/4" on the large end. The only markings we can see are on the end and read"T44502" The bar holds a 1/2" square tool bit and we include 3 used ones with the tool. A 3 letter scribe is noted and pictured. Shipping and handling costs for this listing will be $11.95 within the U.S.A. We will ship internationally if a cost or calculator shows below. Or please inquire for international shipping costs. Visit our eBay store for more great values. We will ship promptly. We want your 5 star feedback and will do all we can to make ... moresure you are satisfied with your purchase. Please contact us first if you have any issues with your order upon receipt. Michigan sales will be invoiced with sales tax. Thank you! 0113034642)
|
|
|
Jacobs 14N Heavy Duty Super Drill Chuck 0 - 1/2 Straight Shank Arbor A4003
Jacobs# 14n 0- 1/2 ball bearing super chuck. This came from an estate. The shank is marked"Jacobs MFG Co. Hartford Conn Straight Shank Arbor A4003"
|
|
|
ERICKSON DA500 FLOATING REAMER HOLDER WITH 2" SHANK + (30) COLLETS LOT C2060
LOT C2060 WE ARE OFFERING A ERICKSON/ KENNAMETAL DA500 FLOATING REAMER HOLDER WITH 2" SHANK AND 1-1/2" DIA. HOLE THROUGH PLUS(30) DA500 COLLETS! COLLET SIZES RANGE BETWEEN 3/8" AND 1-5/8" YOU WILL GET: 10) COLLETS BY 16THS(10) COLLETS BY 32NDS(10) COLLETS BY 64THS NO DUPLICATES SIZES. YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES PLEASE check out my other items! Be sure to add me to your favorites list! ANY QUESTIONS CALL 937-320-2298
|
|
|
CLEVELAND 242 1/2 BIT BRACE SHANK BURRING REAMER FOR PIPE 1/4 - 1-1/4, FAST SHIP
CLEVELAND 242 1/2 BIT BRACE SHANK BURRING REAMER FOR PIPE 1/4 TO 1-1/4 THIS BURRING REAMER IS PREOWNED. BUT LOOKS& WORKS GREAT. AS YOU CAN SEE IN THE PICTURES IT IS IN VERY GOOD CONDITION. BUYER IS RESPONSIBLE FOR READING AND UNDERSTANDING ALL POLICIES( YOU CAN BUY WITH CONFIDENCE. 100% SATISFACTION OR YOUR MONEY BACK. PLEASE FEEL FREE TO ASK ANY QUESTION OR CONCERNS. WE WILL GLADLY ANSWER. PAYMENTS: PayPal PAYMENTS MUST BE MADE WITHIN 4 DAYS AFTER THE PURCHASE. IF PAYMENT IS NOT MADE AFTER 4 DAYS. WE WILL NOTIFY EBAY FOR NON PAYMENT AND RELIST THE ITEM. SHIPPING: WE ONLY SHIP TO CONFIRMED ADDRESSES. SHIPMENTS TO P.O BOXES WILL BE CHARGED AN EXTRA $10. SHIPPING PRICE LISTED IS FOR THE THE 48 US CONTIGUOUS STATES ONLY. PLEASE CONTACT US PRIOR TO PURCHASE IF YOU LIVE OUTSIDE THE CONTINENTAL US( SHIPPING PRICES MAY VARY) SHIPMENTS ARE MADE ... moreQUICKLY AFTER ITEM IS PAID. INTERNATIONAL SHIPMENT THE BUYER WILL BE RESPONSIBLE TO PAY ALL THE DUTIES IN THEIR COUNTRIES. FEEDBACK: WE WILL LEAVE POSITIVE FEEDBACK FOR ALL SMOOTH TRANSACTIONS. WE ASK FOR THE SAME IN RETURN. WE DO OUR BEST TO DESCRIBE THE ITEM. OUR GOAL IS TO MAKE YOUR SHOPPING EXPERIENCE A GREAT ONE. WE WILL LEAVE FEEDBACK AS SOON AS FEEDBACK IS LEFT FOR US. RETURNS: IF YOU ARE NOT COMPLETELY SATISFIED WITHIN 14 DAYS AFTER YOU RECEIVE THE ITEM. PLEASE CONTACT US AND RETURN THE ITEM FOR A FULL REFUND, MINUS THE SHIPPING COST. NO QUESTIONS ASKED) NO REFUND UNTIL ITEM IS RETURNED. REMINDER: PLEASE. DO NOT ASSUME ANYTHING. IF IT IS NOT SHOWN IN PICTURES OR WRITTEN IN THE DESCRIPTION, CHANCES ARE IT IS NOT INCLUDED! AGAIN, IF YOU UNSURE OF ANYTHING, PLEASE FEEL FREE TO CONTACT US AT(914) 447- 2238 IF YOU HAVE PURCHASED AND HAVE ANY ISSUES. PLEASE DO NOT FILE A DISPUTE OR LEAVE A NEGATIVE FEEDBACK BEFORE CONTACTING US FIRST. I GUARANTEE A RESPONSE TO YOUR EMAIL OR PHONE CALL. WE WILL RESOLVE ANY ISSUES YOU MAY HAVE. A $ 25.00 RESTOCKING FEE WILL BE CHARGED FOR ANY BUYERS THAT BACK OUT OF A PURCHASE WITHOUT A GOOD REASON. INTERNA
|
|
|
1/2" (.500) HSS # 1 MORSE TAPER SHANK 6 Str flutes - 6-7/16"OAL Made in the USA
You are bidding on one BRUBAKER TOOL 1/2" 500) HSS#1 MORSE TAPER SHANK 6 Straight flutes- 6-7/16"OAL Made in the USA Solid Type Jobbers# 1 Morse Taper Shank Reamer. 6-7/16" OVERALL LENGTH 3" FLUTE LENGTH There are 6 Straight Flutes. Made in U.S.A.
|
|
|
3/16" Corner Rounding End Mill -1/2" Shank, Uncoated, Cobalt Steel,
3/16" Radius-1/2" Shank. Uncoated, Cobalt Steel, Corner Rounding End Mill Item Number: DK55RC6ACO Radius: 3/16" Style: Standard Material: Cobalt Size 7/8" Shank Diameter: 1/2" Type: Corner Rounding Number of Flutes: 4 Flutes This is a used item There are light tool parks but this piece is in overall great shape Please email any questions Thanks
|
|
|
7x Niagara HSS/HSSCO Cobalt 3/8" Shank 2/4 Flute Square End Mill 1/4" 1/8" 3/16"
Search our eBay Store! 7x Niagara HSS/HSSCO Cobalt 3/8" Shank 2/4 Flute Square End Mill 1/4" 1/8" 3/16" SKU: JV-HAN-B-L7NIAG38 Condition: For parts or not working Packaging: OEM Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge 7x Niagara HSS/HSSCO Cobalt 3/8" Shank 2/4 Flute Square End Mill 1/4" 1/8" 3/16" Cutter Diameter: Varies Shank Diameter: 3/8” Length of Cut: Varies Overall Length: Varies. M42 Cobalt HSS& High Speed Steel-Right Hand Medium Helix. Right Hand Cut. Includes: 1x#52081 1/4x3/8x5/8x2-7/16 4FL HSSCO Square. 2x#20081 1/4x3/8x1/2x2-5/16 2FL HSS Square. 2x#20061 3/16x3/8x7/16x2-5/16 ... more2FL HSS Square. 2x#20041 1/8x3/8x3/8x2-5/16 2FL HSS Square. Physical Condition: Good– light wear on cutting faces. Minor scuffs/scratches. Functionality/Degree of Testing: We do not have the necessary resources to test this unit. BEING SOLD AS-IS FOR PARTS OR REPAIR. PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to t
|
|
|
CRITERION DBL-204 Boring Head + 1-1/2 Straight Shank
CRITERION DBL-204 Boring Head Actual Size Dia. 4" Boring Bar Hole Size: 1" 1-1/2" 18 threaded back permits the use of a variety of shank. Condition: used. Excellent + CRITERION 1-1/2 Straight Shank Please look over the photos and ask any questions you may have before bidding. Check out my other listings and my for more original parts and tooling. Always combine shipping. I'll be happy to try to answer any questions you may have- e-mail me and I'll get back to you as soon as I can. International buyer please e-mail me for shipping quote. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13e784504c4-0x102-
|
|
|
STRIPPIT PUNCH AND DIE 0.202" OD X 5-5/16" X 1/2" SHANK #8996
Description: STRIPPIT PUNCH AND DIE Punch: 0.202 od x 5-5/16 x 1/2" shank Die: 0.210 ID x 1-7/8" od x 1-1/8" USED; SHOWS SIGNS OF USE TERMS and CONDITIONS We try to describe every item to the best of our ability. Although we do have experience. We don't know everything. Please ask questions and we will try to get you the correct answer. 1: Will ship using USPS Flat Rate Service most of the time. If you order multiple items. Please wait for an invoice to pay and we will combine shipping to save you money. 2: Refunds are accepted if the item is not as described. We must be notified within 14 days of receiving item. Shipping fees are non-refundable unless we have made an error. 3 Concerning calibration of items; no items are calibrated unless otherwise noted. 4: Customer satisfaction is very important to us. Please email us ... morewith any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
ALBRECHT CHUCK 1/32"- 1/2". 5/8" shank 130 J33 taper
Estate Find. Albrecht Chuck. Made In Germany. 1/32-1/2.1-13,130 J33 are the numbers found on the body of this chuck. Used and in excellent condition.
|
|
|
DRILL BIT LOT 2 WOOD STEEL 1/2"x24" STRAIGHT SHANK 3/8 LONG WIRE PULLER NEW USA
DRILL BITS LOT OF 2 WOOD STEEL 1/2x24 INSTALLER STRAIGHT SHANK EXTRA LONG HEW USA Up for your consideration is this nice LOT OF 2 Brand New WIRE PULLING extra long 1/2" drill bits. These drill bits were manufactured for boring holes in wood or steel. Each of the two bits is 24 inches long and has a drilling diameter of 1/2-inch with a 3/8" shank. These bits are great for drilling a 1/2-inch diameter hole through thick wood or steel walls for installing various kinds of wiring or tubing. The fluted area of each bit is approximately 4 inches long. Please be sure to see the other drill bits we have listed. FEATURES: Wood/steel drill bits. LOT OF 2, Straight shank, 24" length, 1/2" bore, Made in USA There is a small hole drilled near the front end(through the fluted area) so that once you drill through the wall you can attach ... morea lead and pull your wire back out through the wall. INCLUDED: The actual LOT OF 2 wood/steel drill bits pictured NOT-INCLUDED: The original factory packaging or paperwork. SIZE: Each of the 2 drill bits measures about 24" long x 1/2" in diameter. COLOR: Steel gray TYPE: For boring 1/2" holes in wood or steel COUNTRY: Proudly made in America MATERIAL: High Speed Steel CONDITION: This LOT OF 2 drill bits comes to you in overall Excellent Condition. They are in brand new condition. Just without factory packaging. Please take note that these are close-up high-resolution pictures and show much more detail than you would have if looking at it with the naked eye. It's like looking at them with the aid of a jeweler's 10-power loop. These pictures will show far more detail and may actually make the piece look worse than it does in your hand. AUTHENTICITY and your SATISFACTION are UNCONDITIONALLY 100% GUARANTEED! Once you get it- if you are not thrilled just let me know- I gladly accept returns. Check my feedback and buy with complete confidence I have been selling on eBay everyday for over 10 years. SHIPPING DETAILS: The buyer gets FREE securely packed EXPEDITE
|
|
|
HOUGEN ROTABRAOCH 13/16" ANNULAR CUTTERS LOT OF 2 3/4" DIA SHANK 12226
HOUGEN ROTABRAOCH 13/16" ANNULAR CUTTERS LOT OF 2 3/4" DIA SHANK 12226 Click Images to Enlarge Item Description Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 HOUGEN ROTABROACH 13/16” ANNULAR CUTTERS Model: 12226 QTY: 2 Accessory for the"12.000 Series" Cutters 13/16-inch cutter diameter Made of hardened high speed tool steel and precision ground Features a 3/4-inch diameter shank. Each item appears to be in good used condition. Refer to pictures for details. Retail, this item would cost over $62.00 each! You are purchasing one lot of 2 per order, however, more are available for immediate purchase! For other great deals on Construction Surplus items, Please check out our store! Check out our and our! We are surplus equipment dealers with a wide range of products for sale. We are not experts in ... moreany particular item or category we advertise. We do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best as we can. All statements and configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in the pictures. Customer satisfaction is our top priority! E-mails will be answered as promptly as possi
|
|
|
Horizontal Mill Arbor NMTB-40 1" Shank Dia 9-1/2" Long
Welcome! Up for sale is a Horizontal Mill Arbor NMTB-40 1" Shank Dia 9-1/2" Long. Retaining nut not included. Used in good condition. Feel free to email any questions! SCT2134
|
|
|
USED 21/32" Counter Bore With Pilot Hole 3/16" And 1/2" Shank B 42
Used MR& T 21/32" Counter Bore With Removeable Pilot Hole 3/16" and 1/2" Shank
|
|
|
USED 3/4" Counter Bore With Removeable Pilot Hole 1/4" And 1/2" Shank B 39
Used M.R.T 3/4" Counter Bore With Removeable Pilot Hole 1/4" and 1/2" Shank 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13e7dc87d39-0xfb-
|
|
|
MACHINE REAMER #3 MORSE TAPER SHANK 25.400 MM L&I 10-1/2 LONG #2359A
DESCRIPTION: MACHINE REAMER#3 MORSE TAPER SHANK L&I 25.400 MM OR 1.0000 10-1/2 LONG INVENTORY#2359A USED ITEM MAY SHOW SIGNS OF USE SEE OUR STORE FOR OTHER GREAT DEALS. WE GLADLY COMBINE SHIP. TERMS and CONDITIONS We try to describe every item the best that we can. That is hard to do sometimes; Especially when we don't know what some of this stuff is or what it does. We do our best. Therefore; NO FRAUD OR MISREPRESENTATION IS INTENDED. 1: Will ship using USPS Flat Rate Service most of the time. 2: We will combine shipping on most all items. When multiple purchases take place; We will pack the items in the smallest possible box to save on shipping charges for the buyer. Products are shipped in 1- 5 days. Shipping charges are the responsibility of the buyer. 3: We Do Not End Auctions Early. 4: We do offer a money back refund. The item ... moremust be received back in its original condition and we must be notified through eBay messages within 7 days of receiving item. Shipping fees are non-refundable. 5: When we say the item APPEARS to be in Great. Good, or Poor shape; Does not mean the item or items is or are definitely in such shape. When bidding on an item; You take the chance that the item or items may or may not work to your expectations. 6: When we say it is NEW; It will be never used or old stock. 7 Concerning calibration of items; no items are calibrated unless otherwise noted. 8: Customer satisfaction is very important to us. Please email us with any issue you may have and we will do our best to address any concern. PAYMENT TERMS PayPal LIABILITY We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. Products are sold AS-IS without warranty or guarantee. Unless stated otherwise in the description or covered by the manufacturer's warranty. Thank You. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Froo www.froo.com | Froo Cross Sell
|
|
 |