DVB DSNG MPEG-2 ENCODER MODULATOR SET SDI/CVBS INPUT ASI/70MHZ OUTPUT
FOR SALE DVB DSNG MPEG-2 ENCODER MODULATOR SET SDI/CVBS INPUT ASI/70MHZ OUTPUT TESTED
|
|
TANDBERG TT1260 DVB DSNG MPEG 2 PROFESSIONAL RECEIVER
FOR SALE TANDBERG TT1260 DVB DSNG MPEG2 4:2:2 PROFESSIONAL RECEIVER Price is for one unit The TT1260 Contribution Receiver has formed the basis of TANDBERG Television’s MPEG-2 SD 4:2:2 receive solution for many years. Contribution and distribution of video services requires decoding capability of premiere quality. The wide variety of scenarios in which such receivers are used require that the receiver must be extremely flexible in operation. And incorporate a large and sophisticated array of features. The Ericsson TT1260 is a professional grade integrated receiver decoder. Leading the field with a level of quality and large feature range that make the unit the perfect choice for contribution, distribution and mobile applications. The TT1260 is designed to decode MPEG-2 SD 4:2:2 video and present it for onward use at the highest possible quality. ... moreMatching the high quality video capabilities. The TT1260 similarly supports all major professional audio standards. This highly flexible unit offers a vast array of input interface options- allowing the receiver to connect to almost every type of satellite, terrestrial, or telco network. Tested.Working fine
|
|
DVB DSNG QPSK MODULATOR RADYNE DVB3030
Radyne ComStream’s modulator offers a frequency-agile IF output from 50 to 90 or 100 to 180 MHz in 100 Hz steps. Variable data rates from 1 Mbps to 78.75 Mbps can be set in 1 bps steps. The modulator is fully compliant with ETS(European Telecom Standard) DVB and MPEG-2 standards. The DVB3030 is ideal for use in digital video hub uplinks. Flyaway and mobile satellite news gathering vehicles. Other applications include broadcast data distribution. The DVB3030 is programmable from the front panel. Menus are specifically designed for ease of use and quick online operation as well as changes in modulator configuration. All aspects of the modulator are also monitored and controlled through the RS232 and RS485 serial control ports or through an Ethernet port. Operating parameters. Such as data rates and IF frequencies can be readily set and changed ... moreat the front panel or remote serial interface. HIGHLIGHTS 1.0 to 78.75 Mbps(Variable in 1 bps steps) 1.0 to 45.0 Msps Symbol Rate QPSK or BPSK Operation Viterbi(K=7) Rate 1/2. 2/3, 3/4, 5/6, 6/7, 7/8 Reed-Solomon Outer Coding Low Profile Chassis-1U High(1.75” Frequency-Agile 50- 90 or 100- 180 MHz in 100 Hz Steps User-Friendly Front Panel Interface Optional Redundancy Configuration Meets European Telecom Standard 300-421
|
|
DVB DSNG OUTDOOR EXTENDED TWTA 400W XICOM XT-400K 13.75-14.5 GHZ
FOR SALE DVB DSNG OUTDOOR EXTENDED TWTA 400W XICOM XT-400K 13.75-14.5 GHZ CAN WORK WITHOUT CONTROLLER HAVE MANUAL IN PDF TESTED. WORKING FINE PRICE IS FOR ONE AMPLIFIER
|
|
DVB DSNG MPEG-2 ENCODER GENERAL INSTRUMENT/MOTOROLA SE-1000
The Motorola Digital Video Encoder. Model SE- 1000. Provides Motorola's fifth generation video. Compression technolo. Gy in a compact chassis that. Is ideally suited for the cable headend and small. Broadcast applications. Model SE-1000 accepts. Either analog composite or digital CCIR-601 video. And performs MPEG-2 compression using highly. Refined Motorola compression techniques that. Provide high video quality at low bit rates. Video. Compression uses I-frame refresh to facilitate. Seamless MPEG- 2 stream splicing. The video. Compression data rate is controlled by a simple. Front panel interface with pre-set configurations. Tw. O stereo audio channels are compressed with. Either Dolby® brand AC-3 or MPEG layer II audio. Coding. Data services for PSIP insertion or other. Applications are combined with the compressed. Audio and video ... moreto form a transport stream. The. Motorola SE-1000 provides three types o. F outputs, DVB-ASI. Digital headend expansion interface. DHEI) And DS-3, for easy interoperability with. Cable headends and broadcast equipment. The Motorola SE-1000 is ATSC and DVB. Compliant
|
|
DVB DSNG LNR COMMUNICATION L-BAND UPCONVERTER 70MHZ INPUT 875-1450MHZ OUTPUT
FOR SALE DVB DSNG LNR COMMUNICATION L-BAND UPCONVERTER 70MHZ INPUT 875-1450MHZ OUTPUT MAX GAIN 35DB TESTED. WORKING FINE
|
|
DVB DSNG MPEG-2 4:2:2 ENCODER TANDBERG EVOLUTION E5611 #3
E5611. MPEG. 2 E. NCODER. Based on a TANDBERG Television. Designed compression solution. The. E5611 sets new encoding standards. It delivers high performance compression and flawless picture quality in a. Multitude of applications. 0003 03. 01. The TANDBERG E5611 gives high quality images at very low bit rates for maximum bandwidth uti. Lisation. While Reflex™ statistical multiplexing and unbeatable fully exhaustive motion estimation ensure high performance compression ability and quality. Extensive bit rate range with high quality images. Reflex™ statistical multiplexing support• Optimum. Bandwidth utilisation. Pixel Perfect” fully exhaustive motion estimation. Key features. MPEG. 2 4:2:2P@ML and 4:2:0MP@ML encoding. Extensive bit rate range. Fully exhaustive motion estimation. TANDBERG noise reduction. Reflex™ statistic. Al multiplexing. ... moreLow delay modes. MPEG Layer II and Dolby Digital. . AC. 3) audio encoding. Dolby. . 5.1 and Dolby. . E Pass through support. Real. Time graphical input display monitor. 3 expansion slots. Options. Composite PAL/NTSC and analogue component video input. RS. 232 and RS. 422 low and high speed data inputs• Additional audio(4 mono or 2 stereo channels per module) QPSK modulated output(70MHz +/ 20MHz) TANDBERG RAS Encryption for secure transmissions. ASI optical and SSI(SMPTE310) output interfaces. ATM/Telco interfaces supporting both AAL. 1 and AAL. 5 with a range of physical interfaces. Basic Interoperability Scrambling System(BISS) PRICE IS FOR ONE ENCODER ASK ABOUT SHIPPING PRICE FOR YOUR COUNTRY
|
|
DVB DSNG MPEG-2 SCIENTIFIC ATLANTA D9020 ENCODER
The Continuum DVP™ Model D9020 Encoder offers a cost-effective. Compact solution allowing Headend operators to convert NTSC/PAL programs into compressed MPEG-2 format. Requiring only 1RU of space. The encoder offers two stereo pairs of audio(including SAP) Analog and SDI video inputs, and dual DVB-ASI trans. Port outputs. Closed-captioning. V-Chip and DVB WST are supported. For ease of use. The encoder support. S stand-alone operation with an intuit. Ive front panel control. With on-board web page generation. The encoder is easily contro. Lled and monitored via an Ethernet connection and a Web Browser. For applications requiring a full network interf. Ace. SNMP v2 with a simple MIB is supported. Features• Broadcast quality MPEG-2 video encoding in both NTSC and PAL formats• Composite and SDI. NTSC and PAL video input interfaces• Spatial-temporal ... morevideo pre-processing• VBR and CBR video encoding• ® Digital(AC-3) audio encoding(support. For SAP) With analog or digital inputs• Web browser and remote control via SNMP. S. Upported by ROSA™ network management system• Fully user-configurable. With factory and user presets• Support of VBI services including closed-captioning. V-Chip and DVB WST• Form C contact closures to indicate alarms. Both major and minor, and power faults• Stand-alone operation. With front panel control• Small profile. 1RU stackable chassis AC-3 audio encoding mode only PRICE IS FOR ONE ENCODER
|
|
DVB-S/S2 MPEG-2/4 DSNG L-BAND UPCONVERTER DOWNCONVERTER VERTEX LT-3000
UPCONVERTER Input Frequency Range 50 to 90 MHz Input Impedance 75 Ohms Input Level Range-20 to-40 dBm Output Frequency Range 950 to 1525 MHz Output Impedance 75 Ohms VSWR(In and Out) 1.5: 1 Conversion Gain 10 to 30 dB(0.5 dB steps) Gain Linearity(over 10 dB) +0.5 dB Gain Linearity(over 20 dB) +1.0 dB Gain Stability(0 to +50 °C) +0.5 dB Frequency Response(over any 36 MHz) +0.75 dB Frequency Response(over 575 MHz) +1.0 dB Output Power(1 dB GCP) +6 dBm(minimum) 3rd Order Intermodulation(for 2 car. each at-5 dBm o/p) 40 dBc Spurious(at 0 dBm output) 55 dBc Transmit Spectrum Sense Non-Inverting(Inverting option) DOWNCONVERTER Input Frequency Range 950 to 1525 MHz Input Impedance 75 Ohms Input Level Range-75 to-35 dBm Output Frequency Range 50 to 90 MHz Output Impedance 75 Ohms VSWR(In and Out) 1.5: 1 Conversion Gain 30 to 50 dB(0.5dB steps) ... moreGain Linearity(over 10 dB) +0.5 dB Gain Linearity(over 20 dB) +1 dB Gain Stability(0 to +50 °C) +1 dB Frequency Response(over 36 MHz) +0.75 dB Frequency Response(over 575 MHz) +1 dB Output Power(1 dB GCP) +6 dBm Spurious Over 52 to 88 MHz(at-5 dBm output) 50 dBc Receive Spectrum Sense Inverting or Non-Inverting Noise Figure 15 dB max
|
|
DVB DSNG MPEG-2 4:2:2 ENCODER TANDBERG EVOLUTION E5411 S/W 3.8
E5411. MPEG. 2 E. NCODER. Based on a TANDBERG Television. Designed compression solution. The. E5411 sets new encoding standards. It delivers high performance compression and flawless picture quality in a. Multitude of applications. 0003 03. 01. The TANDBERG E5411 gives high quality images at very low bit rates for maximum bandwidth uti. Lisation. While Reflex™ statistical multiplexing and unbeatable fully exhaustive motion estimation ensure high performance compression ability and quality. Extensive bit rate range with high quality images. Reflex™ statistical multiplexing support• Optimum. Bandwidth utilisation. Pixel Perfect” fully exhaustive motion estimation. Key features. MPEG. 2 4:2:2P@ML and 4:2:0MP@ML encoding. Extensive bit rate range. Fully exhaustive motion estimation. TANDBERG noise reduction. Reflex™ statistic. Al multiplexing. ... moreLow delay modes. MPEG Layer II and Dolby Digital. . AC. 3) audio encoding. Dolby. . 5.1 and Dolby. . E Pass through support. Real. Time graphical input display monitor. 3 expansion slots. Options. Composite PAL/NTSC and analogue component video input. RS. 232 and RS. 422 low and high speed data inputs• Additional audio(4 mono or 2 stereo channels per module) QPSK modulated output(70MHz +/ 20MHz) TANDBERG RAS Encryption for secure transmissions. ASI optical and SSI(SMPTE310) output interfaces. ATM/Telco interfaces supporting both AAL. 1 and AAL. 5 with a range of physical interfaces. Basic Interoperability Scrambling System(BISS) ASK ABOUT SHIPPING PRICE FOR YOUR COUNTRY
|
|
DVB DSNG MPEG2/4 IF TO L-BAND UPCONVERTER VERTEX RSI UCB0-008 950-2150MHZ
RF OUTPUT CHARACTERISTICS Frequency range L-Band* 950- 2150 MHz Step size 125 kHz Impedance 50 ohms. Type"N"F connector Return loss 19 dB Min. 21 dB Typ. RF Monitor-20 dBc Nom. 50-ohms, SMA-F connector Frequency Stability 1x10-9/day +/2x10-8 0o C to +50o C IF INPUT CHARACTERISTICS Frequency range 70 +/20 MHz Input Power Range(nominal) 70 to-15 dBm Impedance 75 ohms. BNC-F connector, 50 ohms optional) Return loss 26 dB Min. IF Monitor-33 dBm Nom. 50-ohms, BNC-F connector IF/RF PERFORMANCE Frequency sense Positive(no spectral inversion) Gain at Max. setting 29- 34 dB IF Attenuator 0 to 25 dB Min. in 0.1 dB steps. Local/Remote) L-band Attenuator 0 to 20 dB Min. in 0.1 dB steps. Local/Remote) Output 1 dB compression +14 dBm Min. +16 dBm Typ. Gain variation IF band 1.0 dB P-P Max. 0.6 dB Typ. RF band 950- 1450 MHz 1.5 dB Max. 950- 1750 ... moreMHz 2.0 dB Max. 950- 1950 MHz 3.0 dB Max. 950- 2150 MHz 3.5 dB Max. Gain slope 0.11 dB Max. Gain stability +/0.25 dB/day Max. Group delay +/ 20 MHz +/ 40 MHz linear 0.01 ns/MHz Typ. 0.01 ns/MHz Typ. parabolic 0.004 ns/MHz2 Typ. 0.01 ns/MHz2 Typ. ripple 1.0 ns p-p Max. 1.0 ns p-p Max. AM/PM conversion 0.1o/dB Max. to 0 dBm output Noise figure 18 dB Max. 16 dB Typ. Intermodulation distortion 45 dBc Min. with 2 carriers at 0 dBm output Spurious carrier related-50 dBc Max. at 0 dBm output non-car. related-65 dBm Max. L Band attenuation = 5 dB) AC line spurs fundamental-50 dBc Max. sum of all harm. 53 dBc Max. Second Harmonic of Input-50 dBc Max. at-30 dBm input Second Harmonic of Output-55 dBc Max. at 0 dBm output Phase Noise-50 dBc/Hz Max. at 10 Hz-70 100 Hz-80 1 kHz-86 10 kHz-105 100 kHz-115 1 MHz
|
|
DVB DSNG 4:2:2 MPEG-2 ENCODER QPSK MODULATOR TIERNAN TE-600
TE600 MPEG-2 DSNG Encoder is an MPEG-2 encoder for single or multi-channel DSNG. The video inputs are either composite video(PAL or NTSC) or serial digital component video. There are two stereo analog audio inputs and two serial digital audio inputs. The compressed digital output is a DVB®-compliant MPEG-2 transport stream on two DVB® ASI interfaces and a QPSK modulated 70 MHz carrier. PGCA Encryption for secure programming.
|
|
DVB DSNG ADVANCED QPSK MODULATOR SCIENTIFIC ATLANTA D9390
Description Scientific-Atlanta’s PowerVu® Advanced Modulator now offers DVB-compliant higher order modulation technology in two unique configurations in order to meet satellite operator needs. A standalone 1RU. Multi-mode D9390 modulator is shown in the diagram. The same technology has been repackaged as a multi-mode. One-card D9752 modulator solution that can be installed in the Originator™ encoding platform. Both products feature DVB-compliant QPSK. 8PSK and 16QAM-capability and also utilize flexible digital signal processing techniques for versatility. The PowerVu Advanced Modulator accepts redundant DVB-ASI(single DVB-ASI in the modulator card) and outputs a QPSK. 8PSK or 16QAM modulated signal. This higher order modulation can save operators money. As it requires less transponder space for a given transmission bit rate. Or a higher ... morebit rate in a given bandwidth. The standalone Advanced Modulator and the Advanced Integrated Modulator card may be used in conjunction with Scientific-Atlanta’s PowerVu digital content distribution system or any DVB-compliant encoding or multiplexing product. For single channel or multiple channel applications. The modulator complies with all applicable ITU-R and IESS recommendations and is CE approved. Key Features• MPEG-2 Compliant• DVB-S(EN 300 421) and DVB-DSNG(EN 301 210) compliant• Switching capability between QPSK. 8PSK and 16QAM operation• Frequency agile output for operation anywhere within a transponder centered at 70 MHz or 140 MHz IF• User-friendly menu-driven front panel control for standalone operation• Card-based solution that fits in the Originator chassis for a complete DSNG system in one 2RU package• Fully variable selectable symbol rates from 1.042 Mbaud to 35 Mbaud• Usable information rates from 0.961 Mb/s to 96.0 Mb/s• Programmable Forward Error Correction(FEC) rates• 1:1 automatic redundant configuration including DVB/ASI protect. MUX protect and modulator protection• Redundant power supplies. Providing maximum transmission protection• CW mod
|
|
DVB DSNG DVB-S/S2 MPEG 2/4 SSPA 25W KU BAND AMPLIFIER L-BAND TO 14.0-14.5GHZ
SPECIFICATIONS PERFORMANCE Model DBE-140145-25-N-48 DBE-140145-16-N-48 Transmit Frequency 14.0-14.5 GHz Input Frequency 950-1450 MHz LO Frequency 13050 MHz Frequency Sense Non-Inverting Maximum Input Level w/o Damage + 10 dBm Max Reference Signal Frequency: External 10 MHz Input Power: 5 to +5 dBm at Input Port Phase Noise: 125 dBc/Hz max@ 100 Hz-135 dBc/Hz max@ 1 kHz-140 dBc/Hz max@ 10 kHz P1dB Output Power 44 dBm 42 dBm Rated Output Power 44 dBm 42 dBm Small Signal Gain 70 dB nominal Intermodulation with two equal carriers(5 MHz apart) at 3 dB total power backoff from Rated Power-25 dBc Spectral Regrowth at 2dB below Rated Power at 1.5x symbol rate offset for OQPSK-30 dBc Phase Noise Meets IESS-308 Output Spurious-60 dBc Receive Band Noise Power-150 dBW/4kHz maximum IF Input VSWR 2:1 max RF Output VSWR 1.3:1 max PRIME Upconverter Power ... more24 VDC(15-30 VDC) on IFL 30W max. 22W typical HPA Power 48 VDC(min. 36 VDC. Max. 60 VDC) INTERFACES IF Port Connector Type N Female IF Input Impedance 50 Ohm RF Port Connector WR-75 DC Connector 3-Pin Male- ITT Cannon CB2-16-10PS(mating CB6E16-10SS) Monitor and Control Connector 26-Pin Female- ITT Cannon KPT02E16- 26S(mating KPT06E16-26P) Discrete Monitor Signals Prime Power. TX Active, HPA Off, Over Temp. DC-DC Good Discrete Control Signals TX Enable LED Indicators Prime Power. TX Enable, HPA Off, Over Temp ENVIRONMENTAL SPECIFICATIONS Operating Temperature-40oC to +50oC ambient air temperature Water Ingress IP-24 MECHANICAL SPECIFICATIONS Size 7.0” W x 5.2” H x 9.0” L(165 mm W x 120 mm H x 203 mm L) Weight 9.2 lbs(4.2 Kg) AMPLIFIER ONLY. WITHOUT ANOTHER THINGS FROM PHOTOS TESTED. WORKING PROPERTY CAN BE UPGRADE TO EXTENDED MODE 13.75-14.5GHZ WITH ORIGINAL PARTS +400$
|
|
DVB DSNG MPEG2/4 KU BAND AMPLIFIER XICOM XTRD-400K 400W
XTRD-400K Ku-Band. High Power. Rack Mount Amplifiers. 400 Watts. Power Factor Correction. Digital Display& Control. Interface. High Efficiency. The XTRD-400K is a highly efficient rack. Mountable traveling wave tube amplifier. TWTA) designed for fixed and mobile uplink. Applications. The unit includes RF gain control. A solid. State pre-amplifier. RF filters, cooling, and. Monitoring and control(M&C) systems. Rack space is conserved because the. Amplifier occupies only 3 rack units(5¼. Inches) of a standard 19-inch rack cabinet. Nominal weight is 56 pounds. The unit features a menu driven front. Panel display and RS-232/422/485 serial port. Interfaces for complete computer control. RF, Traveling wave tube. And default parameters. Are easily monitored on the four line front. Panel display. Gain control is provided via the front ... morepanel. Or through the serial interface. The XTRD-400K incorporates high. Efficiency. Dual stage collector TWTs. Reliability is enhanced because both prime. Power consumption and internal operating. Temperatures are reduced for both the linear. And saturated modes of operation. Power factor correction circuitry is also. Included which minimizes line current. Distortion and reduces the required Volt- Amps input. The automatic features of the high. Frequency resonant conversion power supply. Include quick recovery from prime power. Outages and mulitiple helix fault resets(three. Fault cycles. NOT WORKING. AS-IS. NO RETURN. NO REFUND ONLY AMPLIFIER
|
|
DVB DSNG MPEG2/4 OUTDOOR KU BAND AMPLIFIER XICOM XT-400K 400W
FOR SALE DVB DSNG MPEG2/4 OUTDOOR KU BAND AMPLIFIER XICOM XT-400K 400W HV NOT WORKING AS-IS. NO RETURN. NO REFUND HAVE MANUAL IN pdf
|
|
DVB DSNG MPEG2/4 EXTENDED KU BAND UPCONVERTER STS 140MHZ IN 13.75-14.5GHZ OUTPUT
FOR SALE DVB DSNG MPEG2/4 EXTENDED KU BAND UPCONVERTER STS 140MHZ IN 13.75-14.5GHZ OUTPUT
|
|
DVB DSNG MPEG2/4 L-BAND UP/DOWN CONVERTER NSI/VERTEX
up converter input 70 Mhz output 950-1450Mhz BUC supply- 24V 10Mhz down converter input 950-1450Mhz output 70 Mhz
|
|
DVB/DSNG/IP MPEG-2/4/H.264 ENCODER THOMSON VIBE EM-2000 ASI IP OUTPUT
KEY FEATURES› MPEG-4 AVC main and high profile at level 3› MPEG-2 main profile at main level› Adaptive field/frame encoding› CBR and VBR with Thomson Flextream™› ASI and Gigabit Ethernet interfaces› SDI and analog video inputs› AES and analog audio inputs› Advanced filtering with dedicated pixel based motion estimator› Custom slide support› Control and monitoring by Web browser or Thomson XMS™ Management system› Low power consumption› LCD with keyboard› Robust optional features. Including: Automatic loudness control- Dolby Digital/Dolby Digital Plus 5.1 encoder- DVB subtitle transcoder- SD/HD decoder with professional de-jittering- MPEG-4 low latency compression delay- Logo Inserter- Fixed key scrambling
|
|
DVB DSNG HD/SD MPEG-4 H.264 ENCODER MOTOROLA SE-6601A ASI/IP OUTPUT
Product Overview The 6400/6600 Series supports Standard Definition(SD)and High Definition(HD) encoding and transcoding for satellite. Cable, and IPTV applications. This high performance video processing platform supports MPEG-4 SD and HD encoding and transcoding and has been designed to meet future processing demands for both 1080P/50Hz and 1080P/60Hz resolutions. The SE- 6400/6600 series’ optional dual power supplies offer ultimate flexibility for 24/7 delivery operations. Flexible input options simplify headend architectures. Reduce box count, and increase reliability. As well as reduce capital and operational costs. For multi-program transport applications, there is support for StatmuxIP. Motorola’s statistical multiplexing solution for both headend and distributed applications. Advanced pre-processing support complements advanced compression ... morealgorithms to deliver exceptional video quality. Through perceptual video processing(PVP) technology. Which utilizes the patented IPeG™(Integrated Perceptual Guide) The SE-6600 series optimally applies noise reduction and detail preservation to video content. Its perceptual mapping algorithm effectively steers the unit’s powerful filtering technology to remove random, quantization. And impulse noise while conserving the detail that the eye cares most about. The net result is the delivery of better pictures at lower bit rates. Highlights Include: Support for MPEG-4 AVC ○○Main and High Profile@ Level 3.1(SD) ○○High Profile@ Level 4.0(HD) Multi-pass CBR and VBR encoding• Input flexibility ○○SD/ HD/ 3G/ Dual Link— Serial Digital Interface ○○MPEG-2 and MPEG-4 AVC transport over UDP/ IP or ASI ○○Off-air ATSC RF input(SE-6401R and SE-6601R) ○○ASI output(on SE-6601A) Integrated low-resolution proxy(PIP) Motion Compensated Temporal Filter video pre-processing• Perceptual Video Processing(PVP) video pre-processing(on SE-6600 series) ○○Adaptive Detail Preservation(ADP) ○○3D Noise Reduction(3DNR) Constrained Fidelity(CF-CBR) capped VBR mode• Statist
|
|
DVB-S/S2 DSNG MODULATOR RADYNE DM240XR L-BAND OUTPUT
The DM240XR is DVB-S2 ready and can easily be upgraded in the field. The DM240XR provides a comprehensive set of advanced S2 features. The DM240XR extends its dominance in broadcast applications through increased data rate capability and the addition of 16APSK and 32APSK support. Proven performance operating near Shannon’s limit offers results with 30% better bandwidth efficiencies and carrier to noise figures below the noise floor. The DM240XR includes the ability to select the output frequency of 70/140 MHz or L-Band operation without any hardware modifications. The modulator offers a frequency agile IF output from 50 to 90 MHz. 100 to 180 MHz and 950 to 2050 MHz in 100 Hz steps. The DM240XR offers high data rates(up to 190 Mbps for the DVB-S2 and 238 Mbps for the DVB-S) and the most flexible modulation schemes available(QPSK, 8PSK, 16-QAM, ... more16APSK and 32APSK) The DM240XR offers the flexibility to support up to three different data interfaces. The XR includes a built-in ASI interface along with the Plug-In Interface Card(PIIC) system which allows for the selection of two additional data interfaces that can be easily upgraded in the field. Supported interfaces include DVB-ASI. HSSI, RS-422, M2P/DVB, LVDS M2P/DVB and Ethernet(Pro-MPEG CoP 3 and Bridge modes) Remote interfacing can be achieved through one of three onboard connections: Ethernet(Web or SNMP) RS-485, or RS-232. Additionally, FTP capability for firmware upgrades allows a quick, reliable method to update installed systems. The front panel offers push-button control of all features and a backlit LCD display. DVB-CID ETSI TS 103 129 is the ETSI standard for combating satellite interference and is largely based on Comtech EF Data’s award-winning MetaCarrier® technology. MetaCarrier technology embeds and detects a small message and unique ID within a video or data satellite carrier. This embedded message and ID significantly reduce the time to identify and clear interference sources. The MetaCarrier is embedded using spread spectrum techniques wit
|
|
DVB-S MPEG2/4 DSNG MODULATOR RADYNE DM240 L-BAND OUTPUT #1
H. IGHLIGHTS. Features and Software Upgrades Readily Available. Through Easy-To-Install PCMCIA Feature Cards. Data Rates up to 238 Mbps(In 1 bps Steps) QPSK. 8PSK and 16 QAM Operation. Rate 1/2. 2/3, 3/4, 5/6, 7/8, 8/9. Reed-Solomon Outer Coding. Frequency-Agile 50 to 90. 100 to 180, or. 950 to 1750 MHz. EN 301-210. DVB and MPEG-2 Compliant; ITU-1294 System B(DSS) Optional) Low-Profile Chassis- 1 Rack Unit(1.75" High. User-Friendly Front Panel Interface. Optional Redundancy Configuration Monitor Port. Available.
|
|
DVB DSNG C-BAND UP/DOWN CONVERTER EF DATA/LNR/NARDA V2200
The V2200 consists of a 1RU chassis and one or two converter trays. The chassis is comprised of redundant fans. A system M&C processor. IF and RF switches(optional) and front-panel controls and display. Each converter tray is equipped with a power supply and reference oscillator in addition to the converter module. The converter trays can be configured in any combination of the following: C- or Ku-Band. Up or down converter, 70 or 140 MHz IF. This flexible architecture allows multiple and varied system configurations in one-half the space fo the industry standard. Likely configurations include:
|
|
DVB DSNG MPEG-2 ENCODER /MODULATOR TANDBERG E5740 50-180 MHZ #1 OUTPUT
FOR SALE DVB DSNG MPEG-2 ENCODER/MODULATOR TANDBERG E5740 50-180MHZ OUTPUT
|
|
DVB/DSNG MPEG-2/4 25W C-BAND OUTDOOR AMPLIFIER COMTECH CSAT/5060S-025
Introduction The CSAT-5060 and CSAT-6070 C-Band Transceivers provide superior performance. Long-term reliability, and ease of installation. A very price-competitive product, these transceivers embody the best design efforts of our highly experienced RF engineering team. Typical Users• Cellular Providers• Maritime• Oil& Gas Full Rated Power The CSAT-5060 and CSAT-6070 deliver the full rated power. Or more, measured at the 1 dB compression point and at the output flange. You will know the useable output power you are paying for, and receive full value for your investment. Common Applications• VSAT point-to-point applications– TDMA. DAMA, SCPC/MCPC Phase Noise The dual synthesizers in this family of transceivers deliver superior phase noise performance. Exceeding Intelsat specifications by a substantial margin. Your applications will benefit ... morefrom outstanding spectral purity and the ability to operate in multi-carrier environments with less worry. Third Order Intercept(TOI) The design provides a high TOI that allows multi-carrier applications without the issues normally encountered in low power environments. The CSAT-5060 and CSAT-6070 deliver performance usually found only in split converter SSPA systems. Small. Compact Design The transceivers are enclosed in a single unit chassis. This design allows quick. Easy installation for all models in this family of transceivers. Full Monitor and Control(M&C) A variety of full monitor and control methods are designed into the CSAT-5060 and CSAT-6070: Convenient connection using an optional small. Hand-held terminal• Easy access via EIA-232 or EIA-485 connections• Remote management via the CDM modem family or the PC-based SatMac proprietary M&C software
|
|
DVB/DSNG/IPTV MPEG-2 ENCODER SCIENTIFIC ATLANTA D9040 ASI/IP OUTPUT
To help optimize bandwidth utilization in digital transmission systems. The Model D9040 Encoder is designed to deliver high-quality MPEG-2 video in a small amount of bandwidth, allowing efficient utilization of bandwidth constrained mediums such as satellite. The PowerVu® Network Centre(PNC) can provide control of multiple D9040 encoders. Providing conditional access and managing the services through the primary distribution chain for programmers and broadcasters. MPEG-2 video encoding(migration path to AVC in future) Pre-analysis with 3:2 pull-down inversion, Adaptive motion compensated temporal filtering with PreSightPlus noise reduction, 1 RU. Low power consumption, stackable, Dual redundant power supplies, Four audio channels as either embedded. Analog or digital audio input, Dolby® Digital/AAC pass-through and MPEG-1 Layer ... moreII audio encoding, Integrated Frame synchronizer with internal reference, PowerVu VBI and DVB VBI support, SDI or composite input, DPI via SCTE 35 support triggered by contact closure, PRICE IS FOR ONE UNIT
|
|
DVB/DSNG MPEG-2/4 KU-BAND UPCONVERTER COMTECH UT-4514 IF INPUT 14.0-14.5 GHZ OUT
Application The Comtech EF Data(CEFD) UT-4514 Up Converter is the ultimate in high performance and cost effective Ku-Band frequency conversion. The UT-4514/X can be used for SCPC. DAMA, and TDMA, as well as full transponder HDTV and analog TV. Spectral purity and stability characteristics fully meet or exceed the requirements of all domestic. International, and regional commercial satellite networks. High Gain The UT-4514 has +10 dBm minimum output level at the 1 dB compression point and 35 dB of gain as a standard. This capability permits longer cable runs to the modem rack or compensates for elaborate splitting networks without adding expensive options such as external line amplifiers. Low Phase Noise The phase noise performance of the UT-4514 exceeds the Intelsat phase noise mask for IBS and IDR services by more than 8 dB. This allows ... morephase dependent demodulators to perform better. The close-in phase noise is very low. Making the converter ideal for low bit rate digital circuits such as those used in DAMA hub earth stations.
|
|
DVB DSNG MPEG-2 ENCODER /MODULATOR TANDBERG E5611 50-180 MHZ OUTPUT
FOR SALE DVB MPEG 2 ENCODER/MODULATOR 4:2:2 TANDBERG E5611 SDI/CVBS/COMP INPUT. ASI/IF OUTPUT TESTED. WORKING FINE
|
|
DVB/DSNG MPEG-2/4 L-BAND UPCONVERTER ADVENT AU-3725 950-1525 MHZ OUTPUT + DC
FOR SALE 70 TO 950-1525MHZ DVB UPCONVERTER 2 OUTPUTS WITH BUC DC POWER AND WITHOUT TESTED. WORKING FINE
|
|
DVB/DSNG MPEG-2 ENCODER TANDBERG E5710 ASI OUTPUT
MPEG-2-based digital video headends continue to be a critical part of the encoding landscape for terrestrial. Telco, satellite and digital cable service providers. The ability to obtain excellent picture quality at low bit-rates remains the most important performance factor for encoders and is a hallmark of Ericsson’s E5710 MPEG-2 encoder. The E5710 is ideal for real-time broadcast-quality encoding. Digital video turn-around and efficient video delivery over any last-mile network. The E5710 is a highly reliable and adaptable MPEG-2 encoding platform with an extremely flexible backplane. Enabling many options for audio encoding, re-multiplexing and multiple output formats. For service providers with sufficient bandwidth who want to rely on MPEG-2’s outstanding performance and long development history for their television services. The E5710 ... moreis the industry gold standard for MPEG-2 encoding. With a myriad of feature upgrades, software licensing options and performance enhancements available.
|
|