|
AGFA 9000PS STAR PLUS Image setter
AGFA 9000PS STAR PLUS Image setter Description: ALL ITEMS ARE SOLD AS IS. So please read below and ask all questions prior to bidding. Item Information Item Description: AGFA 9000PS STAR PLUS Image Setter Condition: This item is old and used. The front plastic panel is cracked in the bottom right corner which can be seen in the pictures. The plastic is very yellowed from age. There are some markings and stains on the casing as well the bottom has quite a few markings and scratches. Testing Done: This machine powers on and that is the only testing we have done. You can see from the pictures which lights come on and what colors they are. Otherwise NO OTHER testing has been done with this item. It is unknown if the machine works properly and we did not open up the machine at all. Additional Accessories: No Accessories come with this item. This ... moreis a used item that if tested. Was subjected only to a quick power-on test and visual inspection. If the unit does power on, it was left on only long enough to be photographed. We do not have the expertise or equipment to do further testing. We do not test any accessories or parts installed in the unit. We do not remove the covers or cases on the unit to examine the inside, unless stated in the description. Unless otherwise stated. All items are sold AS IS FOR PARTS OR REPAIR and are not guaranteed as fully functioning item. Nor do we claim them to be. What you see in the photos is what you are bidding on. If it is not in the photos, is is not included. Hours of operation: Good Point Recycling is open for local pickup and available to answer questions. Monday through Friday from 8:00AM to 3:00PM. Please be aware that we are closed on weekends and all major holidays. Payment Policy: PayPal is the only payment method accepted. Payment for won item is expected no later than 4 days after the auction closes unless prior arrangements are made. We reserve the right to open an unpaid item case with the eBay Resolution Center. Or relist an item that is not paid for, within 4 da
|
|
|
Plate Burner Plate Maker NuArc
Pick up only located 08302 nj Works fine. Good condition. Glass top and vacuum board is fine on both sides
|
|
|
Heidelberg CreoTrendsetter 3224 CtP Platesetter
HEIDELBERG CREO TRENDSETTER 3224 CTP. CTP Computer-To-Plate Platesetter. Trendsetter. Laser. Thermal squarespot laser head. Max. Plate size: 32'x44' 813x1118mm) Min. Plate size: 13'x15.52' 330x394mm) Productivity 11 plates/hr. Resolutions 1200 DPI-2400 DPI. Aluminum Thermal Plates. Machine Dimensions 2743x914x1092mm. Machine weight 1.150 LBS. Also. Processor and Rip. Buyer pays loading and shipping cost. No out of the country bidders please. If you are not a US bidder and bids. Your Bid will be removed. I have had too many out of country. Non paying bidders. Call Chase with question: 612-998-5313
|
|
|
Agfa AccuSet 1000 & Rapiline 20-OLP & Navigator Xitron GPS Software
Agfa AccuSet 1000& Rapiline 20-OLP& Navigator Xitron GPS Software This unit is for sale for repair or parts, Was working the service repair agent suggested to purchase a motor(installation guide included) No longer needed, Navigator Xitron GPS Ripp Software included and Computer Card Manuals included Customer pays actual shipping and Freight cost. And insurance, we will co-ordinate with shipper. The machine will be ready for pick up on Wooden Pallets. If you have any questions. Please ask. Specifications. Electrical Requirements: 115V. 8A, 50/60Hz Imaging System: visible red laser diode/single facet prism Maximum Imaging Speed: 600 dpi: 30" per minute 1200 dpi: 15" per minute 1800 dpi: 10" per minute 2400 dpi: 7.5" per minute 3000 dpi: 5" per minute Maximum Line Screen: 175 lpi Media Widths: 12" 13.3" ... more14" On Line Processor Option: on line processor is available for AccuSet series. call for price Output Media: RLD-sensitive film. Polyester plate or RC paper Physical: width: 32" height: 39" depth: 29" weight: 355 lbs Repeatability: +/ 1 mil Resolution: 600. 1200, 1800, 2400 or 3000 dpi Spot Size: 35 microns(600 dpi) 20 microns(all other resolutions) Suggested Film Processors: Rapiline 17. Omega 20, DT-22, Multiline 15, Devotec 20 Suggested Poly-plate Processors: SMOX-22 Suggested RIPs: Star 400. Star 600, Star 800, Viper, Taipan, Harlequin, Xenith Take Up Capacity: 45'
|
|
|
AB Dick Presstek DPM 2340 Computer to Plate System w/ RIP 2006- Excellent Shape!
AB Dick Presstek DPM 2340 Computer to Plate System w/ RIP 2006 in Excellent Shape! works fine and gets regular use. feel free to call with questions during business hours M-F 973-473-2700 or send a message through eBay for local pickup only. there is an off chance delivery can be arranged for a negotiated fee- please call re: this as well please observe photos carefully- what you see is exactly what you get thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14aef2d5f0d-0x10f-
|
|
|
Galley Cabinet with 65 Galley Drawer #643
Galley Cabinet has 65 Galley drawer 9x13 Pick up in Canton Ohio
|
|
|
16" x 20" Vertical Goodkim Camera
16" x 20" Vertical Goodkin Camera Fully operational and ready to be used. Local Pickup Only. No reasonable offer refused. Location Glendale. NY. Other printing items also available. 75 Years printing business going out of business.
|
|
|
Kodak / Creo Trendsetter 800 Quantum Computer to Plate CTP Platesetter
Kodak/ Creo Trendsetter 800 Quantum Computer to Plate Machine 2001 Creo Trendsetter 800 remanufactured in 2005 by Kodak. 40w Laser with 1800 hours Print Console on Dell PC Crating for International Shipping This machine is in excellent condition and has been completely tested. Please message or call with any questions. 201) 410-3537 WE SERVICE ALL KODAK CTP MACHINES.
|
|
|
Screen Katana 5055 Imagesetter with On Line Processor
1999 Screen FT-R5055 with On-Line Film Processor(Fuji Branded) Electrical Requirements: 100-120V/200-240V. 0.4 kW, single phase Imaging System: flatbed. 635 nm laser diode, polygon mirror Internal Punch: optional Maximum Imaging Width: 22.6" for film& paper. 1.8" for polyester plate Maximum Line Screen: 250 lpi Media Widths: 10" 12" 14" 16" 18" 20" 22" 24" On Line Processor: Screen standard LD-M1060 Output Media: HN-sensitive film. Polyester plate or RC paper Physical: imagesetter only width: 41.8" height: 39.5" depth: 30.7" weight: 440 lbs Repeatability: +/ 1 mil Resolution: 1000. 1200, 1500, 1800, 2400 or 3000 dpi
|
|
|
Rebuilt Agfa Drive Roller for an Agfa 9400 9550 9800 Imagesetter
Rebuilt Agfa Drive Roller for an Agfa 9400 9550 9800 Imagesetter In Rebuilt Unused Condition Fast and Free Shipping Pay me securely with any major credit card through paypal! Terms: We accept Paypal. Sales tax will be charged on all sales delivered in California. Shipping: We ship USPS. We post feedback on all transactions. Thanks- Powered by The free listing tool. List your items fast and easy and manage your active items. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
ABDICK DPM 2340 PLATEMAKER
ABDICK DPM 2340 PLATEMAKER. Features• Easy to operate. 45 plates per hour at 900 dpi. Internal drum. 900 to 3600 dpi in 17 discrete steps. Accurate ripped image preview. Daylight loading material cassettes. In-line dual-tank processor. Outputs plates and film in sizes up to 14"W x 20"L(356mm x 508mm) Multiple plate medias for different job requirements. Accepts PostScript® and PDF files from most computer platforms. Harlequin-based software RIP. Pentium®-based RIP computer w/ Windows 2000® operating system. Specifications Physical Specifications Dimensions without plate catcher: 54"H x 45"L x 28"W(137cm x 114cm x 71cm) Dimensions with plate catcher: 54”H x 45"L x 41"W(137cm x 114cm x 104cm) Weight: 675 lbs. 306kg) Operating Specifications Plumbing/Ventilation: No plumbing required. Do not ... moreinstall machine in a spray powder environment. Environmental Specifications: 30% to 70% relative humidity(RH) 65° to 80° F. 19° to 27° C) Laser Class 1 Laser Product(Red Laser Diode) According to EN60825-1:1994. Certifications UL. CSA, CE, FCC. Electrical Requirements 180 to 250 volts AC. 50/60 Hz; 20 Amps@ 60 Hz; 16 Amps@ 50 Hz. Receptacle NEMA L6-20R. US only(must be supplied by customer) Printers RIP Specifications Type Harlequin®-based software RIP. Input Accepts PostScript® and PDF files from most computer platforms. Fonts 35 standard fonts. Additional fonts downloadable, font management. Rip Station Intel® Pentium® processor. Windows 2000®, 10/100baseT Ethernet® card. Ultra wide differential SCSI. Monitor, keyboard, mouse. Output Specifications Plate Media Size 133/8"W x 20"L(340mm x 508mm) Film Media Size 14"W x 20"L(356mm x 508mm) Minimum Media Size 9"W x 12"L(229mm x 305mm) Image Size Maximum w/ Plate 133/8"W x 191/4"L(340.3mm x 489mm) Image Size Maximum Film 14"W x 191/4"L(356mm x 489mm) Media Provided in a 200' 61m) roll in widths from 9" to 133/8" 228mm x
|
|
|
PRINTING PRESS REGISTER PUNCH FOR RYOBI/OTHER PRESSES
Up for your consideration is a Pin Register punch for a Ryobi Press. Its used to punch plates and OVM for registering images in pre-press. Can also be used for registering other presses. If your looking at this you know what it is. I'm not getting into specifics. Unit is in very nice physical condition and works as good as the day it was new. I got out of printing 10 years ago and found this in my garage. I bought this new and only used it for a few years. As you can see its in very nice condition. Shipping fee quoted is just for the CONUS. Inquire for shipping outside of U.S.
|
|
|
Nuvera 120 XEROX NUVERA120 Digital Black and White Press Copier
UP FOR AUCTION: USED XEROX NUVERA-120 DIGITAL NETWORK PRINTER/COPIER. IN GOOD WORKING CONDITION. TO BE PICK UP AT OUR LOCATION. Last recorded number of copies is 5.588,591 in Xerox service file. This unit is registered to our company and we do have all records of service. READY TO BE PICKED UP. CAN GO BACK ON XEROX"PER-CLICK" MAINTENANCE. Or. INDEPENDENT SUPPORT. WE WILL HELP LOAD.
|
|
|
NELA Plate Bender HAO 215 A.-Nr. 52418 2001 230V 50Hz 6 bar 0,1kW
see pictures for details cal arnie with any questions@ 847-636-7380.
|
|
|
NELA Plate Punch Model HAP 754 A.-Nr. 52417 2001 6 bar
see pictures for details call arnie with any questions@ 847-636-7380.
|
|
|
EFI Fiery X3eTY2_6555C-KM System Software v1.1
EFI Fiery X3eTY2_6555C-KM System Software v1.1 For Konica Minolta BizHub Pro. 6500/6501/5501/5500. Disc in great condition and in working order. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-14b04eaafd6-0x113-
|
|
|
MITSUBISHI PURUP-ESKOFOT DPX 5080 SYSTEM PLATEMAKER PLATESETTER
Made great plates till we went in a different direction. Highly recommend qualified equipment mover as our back door is 3-4 feet above floor level(it came in the same way just fine) Also recommend qualified setup to tweak/adjust as needed. Drawer a little tight- nothing a good tech couldn't adjust. Used several years but never heavily. We are a small shop. The technician who worked on it over the years thinks it's worth $5.000- $7,500.
|
|
|
Mitsubishi CP-50S Plate Maker & Hamada 611 CD
Selling a Mitsubishi CP-50S Plate Maker and a Hamada 611 CD Offset Press Machine. Both machines are in excellent condition.
|
|
|
Ripit SpeedSetter poly plate maker
SpeedSetter Ripit poly plate maker Comes with small processor ST-14. Both machine has been pulled out of small printshop Was kept as an back up for the existing system. Sold as is.All functioning,NO RIP. We can ship domestic and International for addition fee. For further info please contact Ron 201.519.0219.
|
|
|
Brown Manufacturing Black light X-po Machine Exposure Unit
Up for sale is a brown manufacturing black light exposure unit used in screen printing and is in pretty good condition was found in a storage locker so don't know the history please see photos for actual item
|
|
|
HEAD DRV2 board for PT-R 8000 CTP Platesetter Used
Used HEAD DRV2 board for PT-R 8000 CTP Platesetter. Comes with head drive parameters. Comes with 3 months Warranty. Comes packed in a protective package. Will ship worldwide by EMS Japan postage only. only to countries that have EMS postage tracking service) no shipping to India or PO Box) Shipping Time: 7 to 21 days approx' depending on location. Shipping cost apply and all shipments are the buyers responsibility to pay additional costs such as duties. Taxes,and customs clearance fees if applicable at buyers location. Must be installed by a qualified service engineer. Please visit our web page as follows. Thankyou.
|
|
|
Kodak Pre-Press Plate Processor Sword Excel NE 32 - Chemistry & Delivery Table
Kodak Pre-Press Plate Processor Sword Excel NE 32- 6 Chemistry Cubes& Delivery Table- UMBELIEVABLE DEAL 4 SKIDES ALL THESE ITEMS HAVE BEEN CLEANED LIKE BRAND NEW. ALL SKIDDED UP READY TO BE SHIPPED OR PICKED UP- AS IS- CAN BE USED AS SPARE PARTS MACHINE OR USED FOR A NEW STARTUP PRINTSHOP. GREAT PRICE FOR THE PRODUCT. THE CHEMISTRY ALONE IS WORTH OVER $600 BUCKS. INCLUDES 6 CUBES OF CHEMISTRY AS SEEN IN PICTURE. 3) KODAK 877 PLATE FINISHER. 3) KODAK 980 PLATE DEVELOPER. ALSO INCLUDES PLATE DELIVERY SYSTEM& TABLE AS SEEN IN PHOTO ALSO. ANY QUESTIONS SEND ME AN EMAIL-
|
|
|
SCITEX/CREO PSM Rip for Imagesetter- Dongle AND SFLM Fiber Optic Board for Mac
This auction is for the CREO PSM 7.1 also previously SCITEX. Software CD, dongle and SFLM fiber optic board which is installed in a Macintosh G4(which can be included for a little extra) This software and board are in perfect order ready to connect to your imagesetter or platesetter.
|
|
|
Douthitt plate burner
Model Magic 83 Excellent condition hardly used. we burned our 28 x 40 plates before CTP came in.
|
|
|
Lead Slug & Rule Cutter, Economy Model
Price includes shipping to lower 48 states for commercial addresses only.
|
|
|
Plate Punch for Komori 20x26 Press
Used plate punch from a Komori 20x26. Made in America. No longer have the press and need to clean up the shop. Make an offer! Needs to go! Local pickup preferred. But can arrange for Craters and Freighters to ship at cost. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14b17823428-0x111-
|
|
|
Scitex Dolev RF Modulator Driver 506C29034
This modulator driver was removed from a Scitex internal drum system and has a 30 day warranty. BN:14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14b24364b11-0xfd-
|
|
|
Itek Graphix 617s Silvermaster Paper Poly Platemaker Developer Plate Maker press
Itek Graphix 617s Silvermaster Paper OR Poly Plate Maker& Developer In great shape& still gets occasional use. Would keep it but we are closing up shop. Works great with laser printer output. Local pickup only. we will help you load it onto your truck. Please feel free to call with any questions during business hours M-F: 973-473-2700(or email us on here)
|
|
|
Todias TQ+ Densitometer with Case, Manual, Calibration Sheet
Up for auction is a used Tobias TQ+ Densitometer I don't know much about this item. I plugged in the power cord and it powered on. The LED readout is clear. I do not know how to use this but. It showed different values using the calibration sheet. Comes with everything shown in the photos: Densitometer-AC adapter-calibration sheets-RS-232 serial port. Cable and connectors-manual-Carry case 14-day guarantee that this item is as described and not DOA. Please ask any questions before bidding Payment is by Paypal within 48 hours of the auction end. Ships within 1 business day of cleared payment. Ships to all 50 states Priority Mail. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14b24364aa3-0x101-
|
|
|
Agfa Rapiline 28 Plus Film Processor operations board
I upgraded my film processor and we are parting out our old Agfa Rapiline 28 Plus processor. This auction is for the Main Display Board. It powers up and works fine. We also have lots of other parts from this machine. Contact me if you are looking for anything else.
|
|
|
VINTAGE HAMILTON LETTEPRESS TYPE DRAWER TRAY SET OF CAST IRON LEGS BRACKETS
Please note in the pictures the spots that are pitted from oxidation. Mostly at the rear mounting pads. The dimensions shown on the sketch are approximate.
|
|
|
Ryobi High Precision Punch #RP520-220F Heidelberg, Hamada, itek & others
Here is a lightly used very lightly used high precision plate punch. This unit was only used a half a dozen times. It will work on the whole ryobi 3302/3304 family of presses as well as some hamadas and heidelbergs. This is really a universal plate punch for this fornmat of press. I think I paid over 8k for this unit new. It looks like new and operates the same. It will function as it should. The unit is being sold as is where is no warranties expressed or implied. I am closing down a location and the excess inventory and parts needs to be liquidated. Any questions please ask and all you will receive is what shown. No press, nothing else(I had to say that since some people would expect it to be operate somehow magically) I will ship the unit I'd rather not but if you want to send a call tag or send a truck or pickup I will work with you ... morein any way possible. This is a precision unit and I'd hate to have it bounce all over the world but if you are good with that then that's fine. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14b24364a61-0x112-
|
|
|
ECRM VR45 Supply and Take-Up Cassettes
ECRM VR45 Supply and Take-Up Cassettes $280 for the set. We will send an invoice at the auction's end and charge the actual shipping costs for UPS Ground to your location.
|
|
|
5 Supply Cassettes - Brand Unknown
We have acquired 5 Supply Cassettes for an unknown machine. They accommodate a 12" Roll of Film. 1 of the Cassettes may leak light. We will send an invoice at the auction's end and charge actual shipping costs for UPS Ground to your location.
|
|
|
Itek 616 S Platemaker
Great Running Plate Maker. Can be seen running.
|
|
|
MITSUBISHI DIAMOND PLATE J 32-2 PLATE PROCESSOR DEVELOPER WESTERN LITHOTECH
MITSUBISHI DIAMOND PLATE J32-2 PLATE PROCESSOR DEVELOPER WESTERN LITHOTECH this unit is rare to find- catch it fast! In Great Condition Machine Dimensions: w@48" h@37" l@61.5" we have other equipment too. check them out! Shops merged with ours and too much of the same equipment: Message me with any questions relating to my listings. Have other eqiupment going up too! To avoid any confusions we selling this unit AS IS. As we researched units like this sell on the net for more SHIPPING: Unit weight is about 610 lb. It need to be pick up or ship on the pallet. If you only looking for parts off this unit and do not like to ship it whole. I'll gladly take these parts off the unit for you, and ship them by Mail or UPS. If disassemble require more then 60 minutes of my time I'll have to ask you for some compensation, other ... morevise I'll do this for free. Local pick up preferred and strongly advised! I hope that you will be able to PICK IT UP it our place in Southampton. PA 18966. We will help you with shipping arrangements. If unit required to be packaged then packaging cost will added to the shipping. Typically we charged about $80 to package items of this size and put them on the pallet. We can deliver unit for packaging and shipping to local(to us) transportation hub. We strongly recommend to insure this unit! You can use any shipping company that you like estimated weight of unit is about 610 lb. + packing material We do have shipping dock Estimated packaging for such unit will be around $80 Payments: C A S H ON PICK UP preferred. DELIVERY SERVICE AVAILABLE Happy bidding folks!
|
|
|
A .B, Dick Stylus 1411 Vintage in Original Tube Advertising Graphic Design
A.B. Dick Stylus 1411 Vintage in Original Tube Advertising Graphic Design its 470& 472 great shape buy now! 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-14b3111122e-0x108-
|
|
|
RYOBI Press 520GX 522GX 524GX Press Cart Press Dolly
RYOBI Press 520GX 522GX 524GX Press Cart Press Dolly Shipping: Free local pickup or ships by UPS to most commercial addresses in the continental USA for around $35. Please read below( Shipping) and know that this is NOT a firm quote. We do ship internationally. So please contact us for a quote. This RYOBI press cart is for the 520GX series presses. Tested and work well! Actual listed item pictured above is in the PFS showroom located in Orange County. California. We really want to sell this item! Feel free to"Bid" Best Offer" or"Buy It Now. Print& Finishing Solutions is the RYOBI MHI importer/ distributor for the 14 Western USA states and proud GSNA member. We sell and service the complete RYOBI product line in the Western territory directly and through a network of local authorized dealers and service partners. For ... morepurchases outside of the 14 Western USA stated. Please contact PFS for details or visit the below GSNA web site for information about your local distributor. For additional information. Please visit us at www.ryobi-group.com www.ryobimhi-west.com www.printfs.com RYOBI presses are sold FOB PFS’s dock in Placentia. California. If you require local installation. Training, etc. please contact us for a quote. This is our business and we know how to do it right the first time. RYOBI Press Parts& Service Support If you require parts or service support for an existing RYOBI press. Please contact us today. We have over $250k of RYOBI parts inventory on-hand today and most non-stock parts are available in 5-business days or sooner as required. PFS staffs RYOBI regional parts and service specialists. Contact us today at 800-398-5283. Spanish/ Espanol Support espanol.printfs.com Actual listed machine pictured above is in the PFS showroom located in Orange County. California. We really want to sell this equipment! Feel free to"Bid" Best Offer" or"Buy It Now" we are very motivated to move this equipment. Call us if you have any questions) 800-398-5283/ 714-238-11
|
|
|
Barudan BN-III Automatic Bobbin Winder Machine
Machine is Fully Fuctional. Has been stored for a couple of years, Has a little dust on it but can be clean. Export model to USA. 110 volt with standard three prong household plug in. Buyer pays shipping and handling cost, Seller offers local pick up.
|
|
|
AGFA PAC Board (APIS Interface) Removed from Working RIP
This is the PAC board from My RIP. I plugged it in and it works fine.
|
|
|
CTP PLATESETTER AB DICK DPM34 platemaker
AB DICK DPM 34 Platesetter. Very Good condition. Has been under service contract in a community college print shop. Used very little. Complete with Manuals and software. Please call 615-417-7245 with any questions or to make an appointment to see it. We will not ship it. But we have a loading dock and forklift available to assist you in loading. Thanks, David
|
|
|
Printers & Composers Type Tongs or Tweezers for Vintage Hot-Type Letterpress Use
These are not your mother's tweezers. Straight out of her purse! Grab small pieces of lead(led) type with these vintage brawny printer's type tongs(or tweezers. If we must) This pair was part of a near-century-old print shop in Wahoo. Nebraska, which went out of business recently. The compositors(those who assembled the pages to be strapped into the presses) needed these tongs to grab the individual letters. The thick spring-steel tweezers are meant to grab hold tightly. Without bending. Nearly 4" long. No maker or origin name.
|
|
|
Xerox Nuvera 100EA
Xerox Nuvera TM Digital Production System Specifications TM Xerox Nuvera Digital Production System Ultimately configurable and flexible. The Xerox Nuvera TM 100/120 Digital Production System thrives with your proven workflow and in your production environment. The Xerox Nuvera TM Digital Production System. where your unique needs meet their unique solution. New opportunities. New realities. A truly new system that you design. Perfectly tailored to your production needs. Xerox Nuvera TM 100/120 Digital Production System For more information on the Xerox Nuvera 100/120 Digital Production System. Call 1-800 ASK XEROX or visit us on the Web at: Basic Finisher Module(System configurable with 0 or 1 module) Capacity based on 20 lb bond/75 gsm(unstapled) Top tray: 250 sheet capacity Stacker: 3.000 sheet capacity; offset between sets or jobs One ... moreor two staples. Up to 70 sheets Finishing Transport Module Interface to inline production document finishing devices Top tray: 250 sheets(20 lb bond/75 gsm) Document Finishing Architecture(DFA) compliant Electrical Requirements• 200- 240 VAC. 30 amp, 50/60 Hz wall service- Printer. Feeder and Finisher modules included• Optional 50 amp to 30 amp Converter Box available• Optional modules require standard 100- 240 VAC. 50/60 Hz wall service• Power consumption: 0.723 kw(standby) 4.275 kw(running) Environmental Requirements 1• Temperature: 50° to 90° F(10° to 32° C) Relative Humidity: 15 to 85% wet bulb limitation 77° F• Run Mode Heat Emissions: configuration dependent; con- sult Installation Planning Guide Certifications• Section 508 of the Rehabilitation Act(pending) Corporate Environmental Leadership Team policy of maintaining a waste-free customer office• UL 60950. Third edition, CSA 22.2 no. 950& ICES-003-2 B and IEC 60950. Third edition Physical Characteristics Feeder Module(same measurements for Inserter) Specifications Optional Integrated Document Scanning Scan Rate Speed based on 8.5" x 11"A4-sized media: One sided: 120 images per minute
|
|
|
Fuji Saber Luxel V9600 Fully Automated Violet CTP System
Fuji Saber Luxel V9600 Fully Automated High Speed Violet Platesetting System. This dual beam Saber was installed new in Dec- 2005 and is in Excellent Condition. Equipment was de-installed by Fuji and can be prepared for over seas shipping. A Fuji 1260 processor can be included for an additional $4K. We only accept wire payment for this auction. Please call. 973-208-1981 with any questions. Thank you!
|
|
|
ECRM VLR36 Supply Cassette
Supply Cassette for the ECRM VLR36. We will send an invoice at auction's end and charge the actual shipping costs for UPS ground to your location.
|
|
|
Agfa Galileo VS CTP with Agfa LP 82 Ultra Online
3 machines in all Agfa Galileo VS CTP Product Category CTP- Computer-To-Plate Platesetter Manufacturer Agfa Model Galileo VS Maximum Image Area 40.80 x 28.80' Material Type metal plates; 410nm; 0.006-0.012' thick Material Size from 17.72 x 14.5' to 44.5 x 32.29' Resolution 1200-2400dpi Laser Type violet laser diode(410nm) Interface Technology internal drum Repeatability 0.0005' Productivity/Speed 25 to 17 plates per hour depending on resolution RIP Compatibility ApogeeX Processor Compatibility on-line plate processor Automatic Features semi- or fully automated plate loading Additional Features IntelliTrackTM slide mechanism for precise imaging Options multiple plate supply capability via: Galileo Plate Manager Dimensions 53' x 53' x 95' 135x135x241cm) Weight 3300lbs(1500kg) Agfa LP 82 Ultra Online S/N 2065 ... morePlatesize. Min 225 x 290 mm(8.86 x 11.42” Platesize. Max 820 x 1130 mm(32.28 x 44.49” Plate thickness. Min- max 0.15-0.20-0.30 mm(0.006-0.008-0.012” 0.35- 0.40 mm(0.013-0.16” on request) Processing speed 25 mm/sec Throughput* 117 pl/hr(portrait 745 x 605 mm) 85 pl/hr(portrait 1030 x 790 mm) Tank content. Developer 5,5 l(1.45 US gallon) Tank content. Wash-off 10 l(2.64 US gallon) Tank content. Rinse 3,5 l(0.92 US gallon) Tank content. Finisher 3,5 l(0.92 US gallon) Items are in used condition. Contact if interested in more items for bulk shipping. I HAVE SEVERAL OTHER ITEMS FOR SALE. PICTURES AVAILABLE ON REQUEST. PROVIDE AN E-MAIL OR PHONE NUMBER. The item is located in Rochester. NY and the winning bidder will be solely responsible for scheduling pickup of the unit at its current location with all associated costs. I will prepare and help load for shipping. I will palletize as well if requested. I have several other items for sale if interested, feel free to contact me with questions. Include an e-mail address or phone number for faster response time. Items are also for sale locally. I reserve the right to end a listing at any time for this reason. Thank you for looking. Disclai
|
|
|
Agfa Avantra 20/25-OLP Film processor
This is a working AGFA Film processor Model 20/25-OLP. It comes with chemical fill tanks and a SelcetSet Avantra 25E. We stopped using the processor in July of last year. All chemicals were drained andthe machine was cleaned prior to being stored.
|
|
|
Glunz & Jensen Daylight Feed Box
Glunz& Jensen Daylight Feed Box for Multiline 550
|
|
|
Agfa Rapiline 43 Film Processor Racks
Agfa Rapiline 43 Film Processor racks. Good condition
|
|
|
2007 Glunz and Jensen Raptor Pro 68 S Violet Processor
This Processor was excess from a merger. We can load on truck. It is on a pallet. Buyer is responsible for shipping. We can recommend a trucking company if needed. Call Bill Puzzuoli 1-313-598-8455 or e-mail billpuzzuoli@aol.com
|
|
|
Kodak Approval XP4/800XL-AC Laminator/Dell Workstation
Kodak Approval proofing system and workstation. Still operational. Includes process material and predominate. Laminator belt has streak approximate.25" wide in teflon belt that affects proof quality. Also includes calibration module for running test strips.
|
|
|
2011 Kodak Trendsetter 800 IV Computer to Plate CTP Platesetter
2011 Kodak Trendsetter 800 IV Computer to Plate Engine Includes: 2011 Kodak Trendsetter 800 IV CTP Engine Thermal 2.5 Laser Head with 400 Imaging hours Print Console on Dell PC(with dongle) Prinergy Evo 5.1 Workflow UDRC FREE CRATING It is in excellent condition. Please message or call with any questions. 201) 410-3537
|
|
|
Heidelberg Quickmaster 1997 QM46-2 Color Printing Press REDUCED! AB Dick Ryobi
Press has been sitting for a few years. Contact us for details. Questions and more pictures We do have a forklift. sold as is Efficiency in Small-Format Offset Printing. Compact feeder with pile board for all formats Electronic sheet monitoring and arrival control for reliable paper travel AutoPlate for automatic plate changes Register setting on the fly saves time Large rapid-response inking unit for excellent print quality Alcohol-free direct continuous dampening system for consistency in the production run and rapid drying Joint washing of inking and dampening units for rapid job changes Logical operation that is easy to learn The QM 46- good things come in small packages The QM 46 is the ideal press for high-quality print items for private and business use. Its compact design means that only the smallest of footprints is needed to exploit ... moreits strengths to the full. And its high level of automation makes the press easy to operate for both one and two-color jobs. Last but not least, investing in a QM 46 will quickly pay off for you and your customers thanks to its productivity and cost-effectiveness. Specifications Printing stock Min. sheet size 140 mm × 89 mm(5.51 in × 3.50 in) Min. sheet size with add-on for small formats 100 mm × 100 mm(3.94 in × 3.94 in) Max. sheet size 460 mm × 340 mm(18.11 in × 13.39 in) Max. print format 453 mm × 330 mm(17.83 in × 12.99 in) Thickness 0.04 mm– 0.3 mm(0.0016 in– 0.012 in) Gripper margin 7 mm(0.28 in) Plates Length × width 505 mm × 340 mm(19.88 in × 13.39 in) Substrate Metal/polyester Thickness 0.1 mm– 0.2 mm(0.0039 in– 0.0079 in) Pile heights(including pile carriage) Feeder 490 mm(19.29 in) Delivery 540 mm(21.26 in) Sample configuration Dimensions of the Printmaster QM 46-2 Number of printing units 2 Length 1.50 m(59.06 in) Width 1.27 m(50 in) Height 1.53 m(60.24 in) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-14b40181ae6-0x106-
|
|
|
AB Dick DPM 34HSC Computer to plate poly system REDUCED!!!
S/N 21720000 DPM34 HSC outputs three plate sizes: 13" 13.2" and 13.375" ThinDrum™ technology. High speed production. High resolution: 2400 dpi. 175 lpi. Harlequin® RIP; PostScript® Level 3. Accurate RIPped image preview. Unique plate positioning plug-in. Intel®-based computer with Windows® 2000 operating system. Accepts Postscript® and PDF files. Daylight loading material cassettes. In-line dual-tank plate processor. The Digital PlateMaster 34 SC/HSC from A.B.Dick Company is an easy-to-use. High-resolution platesetter designed for use with small-format portrait presses. This affordable direct-to-plate solution features a fully integrated Harlequin® RIP and internal polyester plate processor. The DPM34 SC/HSC streamlines your workflow by seamlessly blending the precision and efficiency of digital ... moreplatemaking with the functionality of conventional printing. Producing press-ready plates from your desktop computer eliminates many steps from the pre-press process. Less operator involvement and fewer materials are required which means greater accuracy. Reduced costs and faster turnaround. With screen rulings up to 175 lpi. The DPM34 SC/HSC is ideally suited for a wide range of applications– from simple spot color jobs to more intricate process color work. And, an image area of 12.6" x 19.2" 320 x 489 mm) lets you print two-up, full-bleed. Packing and palletizing per for load in your transportation addition $225.00. For further info.please contact Ron 201.519.0219 info@zenith-graphics.net. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14b40181b4e-0x11c-
|
|
|
Kodak 800XL Laminator Wide Format .
You are bidding on a kodak 800xl wide format laminator. Used condition. Has been in storage for a while. I have not tested it. Freight shipping or local pickup. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14b430f4858-0x108-
|
|
|
Antique Hobart Printer's Type Cabinet with 54 Drawers Troy Ohio
Antique Hobart Printer's Type Cabinet with 54 Drawers built in Troy. Ohio. Measures approximately 43 1/2 inches high. 33 1/2 inches wide, and 15 inches deep. Bottom middle drawer made of metal is missing. However the front is intact. See photo. The veneer on one side panel is slightly buckled.
|
|
|
Screen PT-R 4100 REDUCED
2005 Screen PT-R 4100 Thermal plate system 16 diodes lase chanels. Machine have very low plate usage. Rip:Xenith Sierra Ver. 3.2. Xitron raster blaser/Xitron blue box. On Proactive server. Addition fee for locking down system/load on your truck For addition information.Please contact Ron 201.519.0219 info@zenith-graphics.net
|
|
|
hiedelburg plate punch
plate punch for hiedelburg printmaster or quickmaster questions scott 412-352-6668
|
|
|
accuset 1500 Plus with online processor
Agfa Accuset 1500 Plus Imagesetter Platesetter and Processor Harlequin Rip w computer Drivers for Accuset 1 take up cassette 13.3 plate Plate Processor- MFG date 2004 Accuset used to run Polyester plates Processor has cracked water tank that has been patched with no leaks.
|
|
|
Screen CTP Model 4100 E
2005 Screen PT-R 4100 E Thermal plate CTP 16 diodes laser channels. Very low plate usage. Rip:Xenith Sierra Ver. 3.2. Xitron raster blaster/Xitron blue box. On proactive computer server. Had chiller attached. Addition fee for locking down/packing and load. For addition info please contact Ron at 201.519.0219.
|
|
|
X-Rite X-riteDot CTP30 Paper & Plate Meter reader Xrite ccDot Dot
16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14b56cb0461-0x10f-
|
|
|
Kodak Sword Excel NE 34 Plate Processor and Delivery Table
Item is currently in use at our printing facility. Below is information copied from the web. The Kodak Sword NE34 Processor is for developing single sided conventional or thermal plates. Compatible with Kodak Sword thermal plates. And Azura chem-free thermal plates. Minimum plate width is 11" And maximum plate width is 35" Developer tank capacity is 10 gallons. Finisher tank capacity is 3/4 gallon. Uses spray bar to disperse chemistry. Does not have an immersion tank. OPTIONS: Feed and exit tables.Electrical requirements: dedicated 220 v. Single phase, 50/60Hz, 20amp. Dimensions: 44"L x 58.5"W x 41.6"H(not including exit table or feed tray which are optional) Weight: 792lbs. NOTE: Buyer is responsible for verifying with their plate supplier that this processor will work with the plates they intend to use. Due to the ... morewide variety of thermal plates available in the market, we cannot guarantee compatibility with a specific plate. Power Cord, Dimensions: 57D x 44W x 51H, Weight: 792 lbs. Crated Dimensions: 61D x 48W x 53H. 1107 lbs.
|
|
|
Contex - Contex Flex50i wide/large flatbed scanner
The large flatbed surface. Fast scanning speeds and ultraflexible design makes the Contex HD iFLEX the perfect solution for the demanding user. Protect fragile originals by placing them gently on the scanner bed or utilize the flexibility to scan books, textile, wood, original artwork or anything you would like to transform into digital content. The HD iFLEX is the most flexible A2/C-size flatbed in the market and can even scan up to A1/D-size documents. Ultra-fast one touch scanning. Scan the entire image in just 4 sec. Single camera with full 600 x 600 optical resolution and true optical lenses for market leading results. Get more: Scan up to A1/D-size document on an A2/C-size flatbed scanner. Unrestricted design. Scan with lit closed. Lifted, open or removed. USB and Gigabit Ethernet with xDTR2, Combine materials like never before. You ... morecan place anything on the scanner bed and let the HD iFLEX do the scanning. The HD iFLEX supports scanning any shape or size and can be used to scan original artwork. Create product catalogs or make digital archives of your most fragile originals. A simple guide in Nextimage will help scanning documents twice the size of the scan bed. Simply place the documents and follow the guide. This truely makes the HD iFLEX an A1 scanner in a A2 size. The Contex HD iFLEX gives you a very beneficial ROI. Keeping the outstanding, renowned Contex CCD quality. Shadows are normally unwanted when scanning originals with folds and other shapes. The iFLEX scanner has ultra-bright LED light that best emulates natural light in a flatbed design and eliminates unwanted shadows in your originals. When scanning shapes. Like brail, carvings or plants, the light source is carefully designed to capture the shadows that make up the shapes of the objects. We call this Natural Light. The HD iFLEX’s high color fidelity can be delivered in Adobe RGB. SRGB or even RAW RGB in full 48-bit color. Combined with true camera optics, a single 4-channel CCD in full 600 x 600 dpi optical resolution the HD iFLEX wil
|
|
|
SCREEN Ultima 16000 CTP Platesetter Tail Clamps, Part #S100068437V01
SCREEN PlateRite Ultima 16000 CTP Platesetter- Tail Clamps. Part#S100068437V01-Trail Edge Clamps are completely rebuilt and function like new. Includes 6 months warranty-Compatible with Screen Ultima PT-R16000 and 16000II CTP. Plus OEM equivalents. If for any reason you are not happy with its performance. We will exchange it or refund your money. Send in your worn out clamps for store credit- please contact us for more details. The team at iFix.com understands your needs. And we’ve built a successful company by responding to your demanding requirements. When you need parts for a platesetter to get it up and running quickly. We know you require four things: Quality components Economical price Dependable source Fast response iFix.com has gained a reputation as the“go-to” imaging systems parts supplier for dealers. Service representatives and ... moreend users around the world. And now we look forward to serving your parts requirements. If you are servicing an Agfa. Creo/Kodak. Fuji. Heidelberg or Screen platesetter. Chances are we have the part you need. When you contact our certified Parts Experts. We will tell you immediately if we have the part, and when it will ship. If the part is in stock, it can be shipped the very same day. So. If you need affordable quality parts, save yourself valuable time and money… Begin your search at iFix.com
|
|
|
HAMADA 612 ,SINGLE COLOR PRESS ,KOMPAC DAMPENING ON MAIN HEAD & T-51 HEAD
YOU ARE BIDDING ON A USED HAMADA 612. SINGLE COLOR PRESS. KOMPAC DAMPENING ON MAIN HEAD& T-51 WITH CONVENTIONAL DAMPENING. Sheet Size 31 cm x 46 cm(12”x 18” LOADED ON YOUR TRUCK OR CONTAINER BERLIN. NEW JERSEY 08091 I WILL LOAD ON YOUR TRUCK OR CONTAINER FREE OF CHARGE. FREIGHT IS THE RESPONSIBILITY OF THE BUYER. EMAIL ME AT BALLY@CRYSTALGRAPHIC.COM WITH ANY QUESTIONS PRIOR TO THE END OF THE AUCTION. BUYER WILL SEND AT LEAST 15% DEPOSIT OR FULL PAYMENTWITHIN 24 HRS by paypal.AND THE BALANCE PAYMENT MUST BE REC'D WITHIN 5 DAYS. CALL 718-523-0552. WE HAVE THE RIGHT TO END THIS AUCTION OR CANCEL ANY BIDS AT ANY TIME SINCE THIS PRESS IS BEING ADVERTISED LOCALLY.
|
|
|
Fujifilm Celix 4000 Imagesetter for Parts
When we recived this machine there was slight damage to the top cover. We had recent added another machine that we used so I cant testify that it is working. Seems to be repairable. But we make no guarantees. Buyer is responsible for all shipping costs.
|
|
|
Lanier LDD345 Digital Duplicator Ricoh DX4545 NETWORKED 11x17 Prints LOW METERS
The Lanier LDD345. Comes as shown here, IS IN EXCELLENT COSMETIC CONDITION, IS MAKING AN EXCELLENT PRINT, HAS LOW METERS of 238,059 PRINTS made on ONLY 1,283 MASTERS, MAKING it NEARLY NEW. This unit is also sold as the Ricoh DX4545, Standard SD345, Savin 3275DNP, some others. This unit is FULLY TESTED BY A TECH PRIOR TO LISTING& IS EXACTLY AS DESCRIBED. The Lanier LDD345 prints up to 120 prints per minute up to 600 dpi& has the following features/options installed: DIGITAL Scanner, Prints Up To 11x17 Print, Black Drum Installed, Network Computer Interface( allows for download of image& text from a computer or network) 50% Reduction, 200% Enlargement, Handle Paper weights of 13-110 lbs, Economy Mode, Confidential Mode, Auto/Manual Scanning Contrast, Line/Photo Mode, Operators CD Manual, Storage Pedestal. Ricoh recommends this unit ... moreto make 500,000+ prints per month& this ones meter shows LESS THEN ONE MONTH'S VOLUME of ONLY 228,059 PRINTS MADE, MAKING THIS UNIT NEARLY NEW. This unit is typically used by Printers, Churches, Schools, Anyone who needs to do large volumes of printing at a fraction of the cost of copying. Although we test& make every effort to accurately describe the equipment, please be advised they are liquidation, therefore sold, as is, FOB Center Moriches, NY. Check out our feedback profile of our many satisfied clients.I will ship to the lower 48 states of the continental U.S. for $290 FOR Shipping or you can pick up on Long Island as soon as funds clear. Payment can be made by Visa, Mastercard, AMEX, or Paypal.Good Luck& Enjoy Life! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-14b658bb582-0x111-
|
|
|
SRS Stoesser Register System Plate Punch Bacher for your Heidelberg Press
SRS Stoesser register system plate punch In excellent used condition. Make sure it is compatible with your press. If you have any questions. Please ask before you buy.
|
|
|
Creo Scitex Kodak TSP 75 UNI Board Lotems Dolevs
For sale TSP 75 UNI board for Creo Scitex and Kodak systems. This board is fully functional. It has been tested and pass all diags. This board can replace any TSP Board. This one is the only model you can use in a Brisque5 and MAC G5. If you have any questions and need support for any Creo Kodak system. Please call 513-312-7154 free shipping in the US only. Request price for international shipping.
|
|
|
Stoesser Register System Plate Punch registration Alternative process
Registration punch used for offset plates but I used it for alternative photo process image registration and alignment 20x20 lucite bed.
|
|
|
GTI CVX-1 Color Viewing Station in EXCELLENT condition
I am selling my Color viewing station. We used it for in-house color proofing of photographs before they were sent to the printer. It was used very little. Always in a smoke free environment. It is in like new condition. There are 4 bulbs in the unit. 84 total hours used, 2416 more hours before they need to be replaced. The viewing area is 29inches by 52 inches. Plenty of room for viewing large prints or multiple smaller prints. The Viewing station is on a floor stand and the table top is 41inches above the floor, the area makes for a great work space. There is one print bar tat will hold your prints. This item is located in our home office in North Florida and will need to be shipped by freight. ABF Freight Truck is a great shipping company that shipped to us from NYC. The viewing station is in amazingly clean/new condition. The bulbs have ... moreover 2400 hours of life in them. The unit has been in a non-smoking home office atmosphere with climate control. This unit brand new is $4700 plus shipping. If you are interested, I can send you more photographs of the entire unit so you know you are buying in confidence. Dimensions- Viewing Size 29 x 52" 74 x 132 cm) Overall Size 88 x 54 x 31" 224 x 137 x 79 cm) Lamp Type GraphicliteT8 fluorescent lamps Weight 263 lbs(120 kg) More info n the dark about the right viewing station for you? GTI has a lavish array of D50 stations that make accuracy and consistency easy: the CVX-1 29 x 52" Viewing Station, with state-of-the-art electronic ballasts, also has Graphiclite T8 fluorescent lamps and Munsell N8/gray surround to give you even light, improved rear wall illumination, and reduced glare. The LiteGuard II LED keeps you constantly updated about lamp warm-up, lamp hours, and remaining lamp life. Removable side walls are included. ISO compliant. So, lighten up. Enhanced rear wall illumination LiteGuard II All units include the LiteGuard II, which displays lamp warm up, lamp hours, and remaining lamp life. The CVX comes complete with side walls(removable) and D50 lig
|
|
|
AB DICK DIGITAL PLATEMAKER dpm 2340
This computer to plate maker is in perfect working condition and is under power and can be viewed in operation. It is easy to operate as it runs just like a printer. The plate maker prints perfect crisp print ready plates from your pdf's. The plate maker comes with the computer to run the plate maker and all the operator manuals and software disks. It also has a new roll of 12" wide material in the magazine. We will strap this unit to a pallet and build a crate around the machine and load it on the winning buyers arranged transport. We have had zero issues with this unit and are selling it because we lost the contract that required us to use this machine. If you would like a shipping quote please email me your zip code and if you are at dock level or have a forklift to unload and I will respond with a quote from my preferred carrier.
|
|
|
nuarc 26-1k plate burner great compact unit look save
Here is a really nice NuArc plate maker. The model number is 26-1k. This is a great compact unit. It is clean and has seen very light use. I am closing down one location and the excess inventory and equipment needs to be liquidated. This is being sold as is where is no warranties expressed or implied. I would prefer local pickup however is you want to arrange shipping through uship or your own freight company then I will strap. Wrap and load onto the truck for 50.00 and you'll pay the actual freight cost. Any questions please ask and thanks for looking.
|
|
|
HELL- LINOTYPE QUASAR IMAGESETTER
You are buying a Hell- Linotype Quasar Imagesetter in UNDETERMINED Condition. Being SOLD AS-IS. Have no way of testing unit beyond the start up.We will contact the buyer within 24hrs of end of auction and expect the same from buyer. We would PERFER Buyer arranging their own shipping. However. If we are to arrange shiiping, We will need to get your method of payment, shipping address and logistics- are you dock high or have forklift, commerical or residential, hours of operation, special delivery situation, etc. We accept Paypal and all major credit cards direct- please call 337-993-3322 for credit card payments, also Cash and certified funds for local pick-up. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NUArc N 750 plate exposure system
This plate burner was used in a very small in house print department that has closed down the machine is fully functional and can be picked up in zip code 22901 or we can palletized this machine for $50.00 and have it ready for ltl pick up buyer aranges trucking
|
|
|
Mega Stahl Offset Plate Reviewing Stand and Combi Reviewing Stand
Measurements: 78-1/2"W x 30"D x 111-1/2"H Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
A.B. Dick dpm 2340 plate maker for parts needs spinner motor 2002 model
A.B. Dick 2340 plate maker. Spinner motor out. Comes with computer. would be great for someone needing a parts machine. Can send more pictures per request. located in Kernersville NC
|
|
|
agfa accuset 1500 imagesetter take up reel
Cassette Take up for an AGFA 1500 Imagesetter
|
|
|
Fuji Luxel F9000 CTF system
1999 Fuji Luxel F9000 Imagesetter system Includes on line processor- AP-1250X. Harliquin Rip includes on Proactive computer. Clean machine.Under power. For further info please contact Ron at 201.519.0219.
|
|
|
Heidelberg QM 42 2 color press
Heidelberg Quick Master 42 2 Color Press. One color unit needs hangers repaired. Currently using it as a one color press as we are not capable of making repair ourselves.
|
|
|
Punch Press - Rosback Foot Operated - Antique
This is a foot powered floor model hole punch by"Rosback" This machine is in near mint condition with(11) punches and operates as if it were new. Excellent for punching paper. Plastic, or leather. You can still clearly see the great decal reading"ROSCO Punching Machine MFD by F.P. Rosback Co. Benton Harbor, Mich. Largest Perforator Factory in The World" This machine is vintage from 1910s and made of wood with a cast iron base. The bottom shelf measures 28 1/4"L) x 15"W) at a height of 34" The upper shelf is 28 1/4"L) x 14"W) and sits at a height of 44" The machine foot print is 18" x 26" and the machine itself measures 33" x 26" at its widest dimension.If you are not going to use it for punching, it would make a fantastic- Stand Up Laptop Computer Desk- Front Lobby Plant ... moreStand- or Bar.This is a large item that will require freight shipment. Please contact me for a freight quote. Please note that shipping cost listed is an estimate only and subject to change based on your location. If you pick it up we will be glad to load it for you.Thanks for looking.
|
|
|
Agfa Avantra 44S with online processor
Agfa Avantra 44S with On line processor MFD: 08.1998. S/N 6141. Complete full size imagesetter. Has Apogee 2.2 Rip on PC computer. Machine is under power. In good working condition. Will dismantle and pack.Palletize and load for addition fee. For further information please contact Ron at 201.519.0219.
|
|
|
Nuarc sst1418 Horizontal Graphic Arts Camera system
NuArc SST-1418 Graphic Arts Horizontal Camera with Owners Manual Good condition Purchased in 1970 Shipping may pose an issue though. It is 6' long by 4' high 326 lbs. if you want it shipped you will have to pay the crating and freight fees or it can be picked up local in Pittsburgh. PA. Any questions please contact me. I do combine shipping on multible items after the auctions are completed. I will only ship to paypal confirmed address if paypal is used. gsrx_vers_586(GS 6.8(586)
|
|
|
ABDick DPM PrinterRIP & ScanMaster
2- ABDick PrinterRips with Monitors and 1 ABDick ScanMaster w/ software and drivers.
|
|
|
Konica 5100t EV-Jetsetter "Digital Imagesetting System"
The unit is clean& fully functional.
|
|
|
AGFA C95 Plate processor with plate stacker
AGFA C95 PLATE PROCESSOR BUYER MUST ARRANGE FOR PICKUP AND DELIVERY MODEL: AZURA C95 SERIAL# AC11410A PRODUCTION MONTH/YEAR: 01/08 VOLTAGE: 208- 230 PHASE: 2W+PE CURRENT(A) 6 POWER CONSUMTION: 1350 HZ: 50- 60
|
|
|
HEIDELBERG LINOTYPE-HELL SAPHIR SCANNER
Up for auction is a used Linotype Hell Saphir Scanner(Product ELS-2000) This unit was pulled from a working system at a commercial offset print shop several years ago and has been sitting in my basement since then. I have no way of testing the unit but the unit powers up and the power light. Ready light and lamp on the scan bed all illuminate and stay lit(see pictures) That is all I can guarantee on this sale. Comes with a power cord and also what appears to be a SCSI cable. All sales are final but product is guaranteed to be as listed.
|
|
|
Xante platemaker 3 MAX SIZE 13" X 36"
Xante Platmaker 3. Max Size- 13" a 33"
|
|
|
AGFA AVANTRA 30 IMAGESETTER DEC BOARD 209714-502 209713-901A
Consists of a single AGFA AVANTRA 30 DEC BOARD. This item is used and was pulled from a working AGFA AVANTRA 30 ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14b8db174b1-0x118-
|
|
|
Rare Printer's Line Gauges (Pica Sticks) of brass & steel, Letterpress, Graphics
Two antique printer's line gauges(pica sticks" made of brass and steel.
|
|
|
1975 Heidelberg SORDZ 36 inch 2 color Printing Press
1975 Used Heidelberg SORDZ Offset Printing Press. 2 color 36 inch with conventional Damps. Powder Spray in good working condition. For more information please call Dan at 214-222-2288 or email We can Load this press on your truck or into your Container for a small Fee. Thank you for looking at Dadds Equipment Company LP
|
|
|
Used Bell & Howell 6 Station Direct Mail Inserter Inserting Sealing Florida FL
You are looking at a used 6 station Bell& Howell inserter for use in direct mail production. We recently upgraded one of our inserting machines and took this one out of service. It could use a little cleaning. But everything works as it should- this machine is mechanically sound. Please ask all questions prior to bidding. Winning bidder will need to arrange pickup or shipping. We will assist with readying the machine for shipping and help load it, but we will not arrange shipping. Bid with confidence as I have over 500 transactions and excellent feedback. Thanks for looking and good luck.
|
|
|
Contex Hd 3650 Plus CCD Scanner $14K New! $6500.!
Best Scanner series ever! Extremely Fast. Rarely Used. Beautiful Scans! Has the Plus Option installed. Also comes with stand. Has Next Image Software bundled as well. Shipping is arranged by the seller. Shipped in original box with the box strapped to a pallet. Over $3000.00 in options is included! Base Model Plus Model Optical resolution 600 dpi, Optical resolution 600 dpi, Enhanced Resolution 1200 dpi, Enhanced Resolution 9600 dpi, Scanning Speed in 400 dpi turbo 1.5"s in 24-bit RGB 3.0"s in 8-bit Index 12.0"s in Graytone& B/W, Scanning Speed in 400 dpi turbo 3.0"s in 24-bit RGB 3.0"s in 8-bit Index 12.0"s in Graytone& B/W, Productivity(documents/hour) 204 D-size. RGB Color, 200dpi 768 D-size. Monochrome, 200dpi 192 A1-size. RGB Color, 200dpi 732 A1-size. Monochrome, 200dpi, Productivity(documents/hour) ... more360 D-size. RGB Color, 200dpi 768 D-size. Monochrome, 200dpi 348 A1-size. RGB Color, 200dpi 732 A1-size. Monochrome, 200dpi, Scan Accuracy 0.1% +- 1 pixel, Scan& Media Width Max Scan Width: 36" 914 mm) Max Media Width: 44" 1118 mm) Unlimited Scan Length, Maximum Thickness 0.6" 15mm) Automatic Thickness Adjustment, Digital Image Processing Dual 2-D Adaptive Enhancement& Adaptive Gray, Embedded in Hardware Color Feature Extraction. ADL + Error Diffusion Halftoning 2-D Sharping. Softening, Blur Filter& Adaptive Thresholding, Scan Modes 24-bit Color. 8-bit Feature Extraction/ Indexed Color 8-bit Graytone. Copy Modes with Grayshades 1-bit B/W. B/W Dual 2-D Adaptive Modes, Color Adjustment 3x3 Matrix Multiplier. Independent RGB Tone Curves(Gamma) Independent B/W Point Setting, Color Space sRGB, Sensors Three(3x) 4-linear CCD(four channels: RGB + Panchromatic BW) 48-bit Color Data Capture. 16-bit Graytone Data Capture, All Digital Cameras, Auto-Maintenance System,
|
|
|
harlequin rip with proofing & trapping fir di presses, ctp, ctf wide format etc
Here is a harlequin rip. This unit can be used to drive di presses. CTP, CTF, wide format printers, copiers and more. The version is 6(I believe) This has been upgraded with proofing and trapping. The unit works as it should and has the interface card included. All manuals and software disks and of course the dongle is included. I am closing down one location and the excess inventory and equipment needs to be liquidated. This is being sold as is where is no warranties expressed or implied. Any questions please ask and thanks for looking.
|
|
|
Vintage Paper Counter | Quick Counter | from the Decor Note Co. | St. Paul, MN
This is a vintage paper counter from the Decor Note Company- St. Paul. Minnesota. It is in excellent condition with few signs of wear and works. it comes with original box(in good condition) original instructions(in average condition with the top torn) the Quick Counter tool I'm not sure of the year of manufacturing. PLEASE READ: Compatibility is the responsibility of the buyer. Please ask questions and research all of your purchases. I strive to answer questions as soon as possible. Usually the same day. Paypal payments only. Ships to the United States and globally through eBays Global Shipping Program. I will only ship to Paypal confirmed address. Shipping is usually within 24 hours of confirmed payment. If you have questions about shipping contact me before you bid. Please pay immediately after winning bid. An"Unpaid Item Case" ... morewill automatically be opened after 48 hours. Thank you and good luck!
|
|
|
3/4" x 11/16" Vintage Calumet Country Club Letter Press Print Block / Golf Club
3/4" x 11/16" Vintage Calumet Country Club Letter Press Print Block/ Golf Club Thank you so much for stopping in and good luck with all your purchases. While you are here please don't forget to take a look at all my Flags. Tapestries, Wall Hangings and Other Collectibles and more.
|
|
|
Herkules Pro Imagesetter with Delta RIP and Delta Tower Currently in Use
Currently in use. Works great. Delta RIP and Tower. Glunz& Jensen LPS 860 Processor. Inline. Fixer heater needs to be replaced, but works fine disconnected. 2 extra supply cassettes.
|
|
|
Fully functioning Agfa imagesetter and processor. Ready to go.
This palladio functions well. But may also be a great purchase for parts to keep your machine running.
|
|
|
Platesetter Creo Lotem 400 - Complete Turnkey
Creo Lotem 400 Platesetter– Complete Turnkey The compact Lotem 400 platform fits easily into tight spaces CTP Output Devices 4-page CTP solutions for all production needs Creo 4-page CTP devices lead the industry with unmatched efficiency. Ease-of-use, image quality and advanced features for printing operations of any size. From the entry-level model to automated high-speed devices with SQUARE spot imaging, every Creo platesetter is a solid business investment that combines superb quality and reliability with a built-in upgrade path, allowingthe equipment to grow in capabilities to serve your evolving business needs Notes: Plates after imaging can be put directly on press No developing required. 1. Included Monitor. Keyboard and Mouse. 2. Hitachi Compressor with regulator 3. Harlequin Xitron Navigator Rip with Monitor. Keyboard, Mouse Customer ... morewill have to make arrangements for delivery. Optional: Installation and warranty are available.
|
|
|
Agfa® Avantra 36/44 Imagesetter with On Line Film Processor CONDITION UNKNOWN
Consists of an AGFA® AVANTRA 36/44 IMAGESETTER with ON-LINE FILM PROCESSOR. CONDITION UNKNOWN. IMAGESETTER ORIGINALLY SHIPPED AS AN AVANTRA 36 AND WAS FIELD UPGRADED TO AN AVANTRA 44. CONDITION OF THIS ITEM IS UNKNOWN. THERE IS NO RIP WITH THIS IMAGESETTER. PHOTOS ARE BELIEVED TO BE OF THE ITEM WHEN REFURBISHED SEVERAL YEARS AGO. NO CURRENT PHOTOS ARE AVAILABLE. Located approximately one and one half(1 1/2) hours from our offices near Houston. Texas. Imagesetter was taken out of service approximately 2 years ago when replaced by a new platesetter. Imagesetter is very dirty. Imagesetter appears to be complete with all components except RIP. No guarantees on this. THERE IS NO RIP WITH THIS ITEM. THERE IS NO WARRANTY WITH THIS ITEM. YOU SHOULD BID ON THIS ITEM AS PARTS ONLY. AVAILABLE FOR PICK UP ONLY. WE WILL NOT SHIP. WE WILL NOT PALLETIZE. ... moreWE WILL NOT LOCK DOWN UNLESS CONTRACTED TO DO SO. SELLING FOR ONE OF OUR CUSTOMERS- WE DO NOT OWN THIS ITEM. Also available at this location: AGFA® Avantra 25S Stand Alone Imagesetter and BasysPrint Platesetter. We can list these items if you have an interest. If you are only interested in the parts, we could part this item out for you. Contact us. All items are subject to prior sale. Information is from published sources. We reserve the right to correct any errors. All of our items may be advertised locally and subject to prior sale. ©2015 DGS
|
|