Micromanipulator Micropositioner Kulicke Soffa Kulicke And Soffa Xyz Probe Positioner Machinist Machineshop Probe Positioner Cascade Microtech Micropositioner Probe Probe Station Micromanipulator Model Rucker Kolls Cascade Microtech Alessi Pull Tester Micromanipulator 3 Test Systems Micro Stop Sheetmetal Xyz Probe Positioner Micromanipulator Wafer Probe Air Vac Swiss Rework Board Machine Vac Swiss Rework Board Machine Nozzle Tools Electricians Avionics Micro Stop Sheetmetal Aircraft Tools Aviation Stop Sheetmetal Aircraft Tools Aviation Machinist 75000 Series Cymer Inc Unitek Miyachi Probe Head Probe Positioner Manipulator Rucker Kolls Model Aircraft Tools Aviation Sheetmetal Aircraft Tools Aviation Machinist Machineshop Kulicke Soffa Model Cascade Microtech Alessi Dcm100 Xyz Probe Microtech Alessi Dcm100 Xyz Probe Positioner Cascade Microtech Dcm Karl Suss Assy Stk Cutter Endmills Machinist Machineshop Tools Aviation Hi Lok Aircraft Aviation Tools Electricians Air Bearing Load Shear Tester Wentworth Labs Zephir Micro Stop Sheetmetal Aircraft Tools Micro Manipulator Canon Plug Pliers Cascade Microtech Summit Wire Bonding Micromanipulator 6200 Manual Probe Hand Ratchet 30 Day Warranty 60 Day Warranty Aircraft Tools Applied Materials Board Pcb Body Shop Bonding Pull Circuit Board Day Warranty Force System Handler Hard Drive Hdd Hi Lok Installed Hp Agilent Ingersoll Rand Lorlin Tested System Machine Magnetics Base Metal Seal Microscope Perkin Elmer Pick And Place Machine Positioner Power Supply Sata Selant Guns Sheetmetal Hi Lok Stainless Steel Table Temperature Force Tested Head Tested Station Tested System Wafer Tested Wire Bonders Rvsi Gauge Control Ball Bonders
 In 
 
Order by: 
Available to: 
Price: 
 - 
$
1051.60
Buy It Now
$150.00 Shipping
Condition: Used
Location: Des Moines, United States
Wafer Probe Station- Alessi Base. Comes with Leica Stereo Zoom 6- Photo microscope with 20X Nikon Eyepieces. 4" Chuck and two Signatone probe micropositioners ... morewith magnetic base(probe tips are not included) Works well.
$
2000.00
Buy It Now
Condition: For parts or not working
Location: Mundelein, United States
Karl Suss PA6 Wafer Probe Station, Bausch & Microscope. 2 units are available. The price is for one unit. Sold as it is. The cabinet is not included
$
75.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Seattle, United States
Wafergard GN Airgun Filter POU. Entegris Mykrolis. Easy-to-use, lightweight gas filter gun refills are designed for POU filtration of compressed gas in ... moresemiconductor applications. For use with silicon wafer, semiconductor, PCB production, laboratory, etc.
$
995.00
Buy It Now
$19.00 Shipping
Condition: New – Open box
Location: Menlo Park, United States
$
5000.00
Buy It Now
Condition: For parts or not working
Location: Gilroy, United States
The eyepieces are 10X W.F.
$
79.99
Buy It Now
$33.43 Shipping
Condition: Used
Location: Leander, United States
(1) FormFactor Wafer Probe Carrying Case. Manufacturer: FormFactor. Lab & Test. Se habla espanol!
$
124.99
Buy It Now
$52.84 Shipping
Condition: For parts or not working
Location: Anaheim, United States
We are located in Anaheim, CA. Misc Information. Not available for this item.
$
7500.00
Buy It Now
Condition: Used
Location: Milpitas, United States
Farmon I.D.451056. Price is for one unit. 562 South Milpitas Blvd. Whenever necessary.
$
300.00
Buy It Now
Condition: For parts or not working
Location: Burnsville, United States
Click to Enlarge) Product ID# C89123 This Rucker& Kolls R&K 1032 Wafer Prober Probe Station looks to be in decent cosmetic condition. Showing ... moresome signs of wear. I hooked it up to my air compressor, and powered it up, and the digital display comes on, but I could not get it to do much of anything. I pressed all of the buttons, but none of them had an effect, other than the"Lamp Override, which only made the"Lamp On" light illuminate. It is being sold as-is, for parts or repair. Approximate overall unpacked dimensions: 32"L x 29"W x 17"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 172 pounds Buyer pays freight plus a fixed handling fee of 0 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this time frame. The rate will expire. We reserve the right to re-quote the freight charges in the event of a payment delay. Auction Ter
$
1170.00
Buy It Now
Condition: Used
Location: Saint Paul, United States
Only the DuoChuck unit is included as pictured. Only what is pictured. This unit powers up and appears to be very clean and complete.
$
196.00
Buy It Now
$22.79 Shipping
Condition: New – Open box
Location: Albuquerque, United States
The probe is new and in its original box with the disk. Max Temp 1100ºC. What is shown in the photos is what you will receive.
$
1.00
Buy It Now
Condition: Used
Location: West Palm Beach, United States
NBK, Wafer probe station. - Probe Technology Corporation, (Wafer probe station). - Keller Technology Corporation, Wafer prober. - Sybron Corporation, ... more(Ultra pure cleaning system). - Laurell, Spin coater (We have 2 of them).
$
275.00
Buy It Now
$12.00 Shipping
Condition: Used
Location: Mountain View, United States
$
2199.95
Buy It Now
$250.00 Shipping
Condition: For parts or not working
Location: Longwood, United States
Wentworth MP-1300 FASPROBER Manual Wafer Prober Comes with what you see in the pictures. If you don't see it. You probably wont get it. Specifications ... moreare from a 3rd Party and may vary slightly due to upgrades. Options, or revisions this unit may or may not have. The unit powers up but we do not have the expertise to test it after that. The key pad seems to have some keys that stick. The Unit's Serial Number Tag Reads: Serial Number: 80 Model Number: MP1300 Voltage: 115 VAC Amps: 5 A Cycles: 60 Hz Key Features: 4" Dia. Chuck, Vacuum Hold Down Stage for the Wafer, Stage Travel 6" x 8" Probe Platform Pneumatic Lift, Accommodates up to eight vacuum or magnetic probe manipulators or a probe card, Bausch and Lomb Microscope(there is no light source provided) For More Pictures Please Click the Following: $75.00 minimum for packaging. Handling, and order processing. Shipping to be determined by destination. If you have any questions please email us at: or call Michael at 1-866-MHZ-ELEC(1-866-649-3532) Toll Free. Also. Please to view or other auctions! 10/17/05 Powered by The free listing tool. List your items fast and easy and manage your active items.
$
975.00
Buy It Now
Condition: For parts or not working
Location: Saint Paul, United States
Only the DuoChuck unit is included as pictured. Only what is pictured. Powers up and appears to be in pretty nice shape.
$
1200.00
Buy It Now
Condition: Used
Location: Milpitas, United States
Signatone S-1008 wafer probing station.
$
1252.65
Buy It Now
$700.00 Shipping
Condition: For parts or not working
Location: Ventura, United States
Click here to see description.
$
5900.00
Buy It Now
Condition: Used
Location: Santa Ana, United States
$
75000.00
Buy It Now
Condition: Used
Location: Morgan Hill, United States
841 Teradyne Planarization kit for Electroglas Model #961-788-00. 842 Xynetics Electroglas 2001X MUX boards. 385 ELECTROGLAS 251074-002 / 251074002. 254 ... moreElectroglas 244288-001 Tester Interface PCB Board Rev. AC.
$
299.00
Buy It Now
$94.12 Shipping
Condition: Used
Location: San Jose, United States
Magne-Tron Instruments M-800 Wafer Resistivity Probe.
$
400.00
Buy It Now
$5.40 Shipping
Condition: Used
Location: Salem, United States
Cascade Microtech Microwave Wafer Z Probe ZProbe ZK20-MCN-13B02-100 NICE!. Condition is Used. Shipped with USPS First Class Package.Each of these probes ... moreare gently used!I have multiple available, you are buying 1 probe.FDA DisclaimerThe sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation and you are a first time buyer, you must verify your status as an authorized purchaser of this item before item(s) can be shipped.
$
45.00
Buy It Now
$35.17 Shipping
Condition: New – Open box
Location: Morgan Hill, United States
Template By Froo! SVTR Wafer Probe Inspection Station w/ 8" Prober Chuck. PPC& Olympus Microscope· WHAT IS IT? This listing is for(1) used ... moreElectroglas EG 2001 Wafer Probe Inspection Station w/ 8" Prober Chuck. PPC TC2000 Vision Module, Joystick& Olympus Microscope. This sale includes shown components ONLY. No other unseen parts or accessories will be included. DOES IT WORK? UNKNOWN(unit was purchased in a bulk of surplus equipment) We do not have the time. Equipment, or expertise to test it further. This means that it is being sold as-is. As-pictured with the assumption and understanding that additional calibration, parts or repairs may be required and should be expected. HOW’S IT LOOK? Fair. Older systems with some cosmetic scuffs or blemishes(see photos) CAN I RETURN IT? No. Returns will not be accepted for this item. Please as questions if needed and bid accordingly. Please read the terms below for more information on our store. Policies, and details specific to this listing. About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted Monday- Friday, 8am- 5pm PST at(760)806-6600. WE BUY SURPLUS TEST EQUIPMENT- MESSAGE US FOR DETAILS* Payment Our ordering system is fully automated and powered by eBay and PayPal Secure Servers. If you purchase an item through our official store your payment is due immediately upon checkout. Item(s) are also available for sale through channels other than eBay and from time to time may be sold before the eBay auction ends. In which case we reserve the right to end the auction early. We will accept PayPal. Company Check, Personal Check, Bank Check or Major Credit Card. All funds must be in US Dollars and unsecured funds must clear p
$
15999.00
Buy It Now
Condition: Used
Location: Singapore
WENTWORTH LABS 6" MANUAL PROBE STATION/ WAFER PROBER (MITUTOYO MICROSCOPE) w/ TEMPTRONIC THERMO CHUCK. Type: Manual Probe Station/ Wafer Prober. Mitutoyo ... moreWF Trinocular Phototube/ Head. (1 pair) Mitutoyo WF 10x/24 Eyepieces.
$
1250.00
Buy It Now
$27.70 Shipping
Condition: Used
Location: Salem, United States
Nice system!In used shape!Comes as shown with the hard case!Have 4 identical units availableFDA DisclaimerThe sale of this item may be subject to regulation ... moreby the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation and you are a first time buyer, you must verify your status as an authorized purchaser of this item before item(s) can be shipped.
$
350.00
Buy It Now
$5.40 Shipping
Condition: Used
Location: Salem, United States
Cascade Microtech Microwave Wafer Z Probe ZProbe ZK20!. Condition is Used. Shipped with USPS First Class Package.Each of these probes are gently used!I ... morehave multiple available, you are buying 1 probe.FDA DisclaimerThe sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation and you are a first time buyer, you must verify your status as an authorized purchaser of this item before item(s) can be shipped.
$
499.95
Buy It Now
$25.49 Shipping
Condition: For parts or not working
Location: Phoenix, United States
M-800A Wafer Resistivity Probe. Photo gallery. FIRST if there is a problem or concern. This item is being sold Untested and AS-IS.
$
685.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Rincon, United States
This SensArray wafer is new open box surplus. The factory bag has a tear (photo #3) and the box has shelfwear from storage. ALASKA, HAWAII, APO/FPO & ... moreU.S. TERRITORIES.
$
250.00
Buy It Now
$15.00 Shipping
Condition: Used
Location: Richardson, United States
$
3500.00
Buy It Now
$85.00 Shipping
Condition: New – Open box
Location: Killeen, United States
$
7300.00
Buy It Now
$180.00 Shipping
Condition: New – Open box
Location: Campbell, United States
Wafer Sight Thickness Gauge ( WSTG48. and WSTG83 ).
$
599.99
Buy It Now
Condition: Used
Location: Sparks, United States
P/N 0364048-000. This will aide in providing a more accurate quote. This fee will vary depending on the size of the item. Nevada Surplus. Everything Else ... more/ Other. Automotive / Aviation. Sparks, NV 89441.
$
961.80
Buy It Now
$700.00 Shipping
Condition: For parts or not working
Location: Ventura, United States
Click here to see description.
$
38000.00
Buy It Now
Condition: Used
Location: Morgan Hill, United States
R98224 Xynetics Electroglas Model 2001X 8" Wafer Probe Prober Station(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click ... moreto Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# R98224 This Xynetics Electroglas Model 2001X 8" Wafer Probe Prober Station is in fair cosmetic condition with many signs of prior use and wear. It comes as shown in the photos and it has not been powered on. Many pieces are missing. However. I lack the knowledge or experience to test this unit, so due to no testing, it is being sold as-is for Parts or Repair. Please see photos for more detail. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos. It is not included. Unpacked dems 45"x32"x44" Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 496.00 Pounds Buyer pays freight plus a fixed handling fee of $25.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Frei
$
1325.00
Buy It Now
$37.00 Shipping
Condition: Seller refurbished
Location: San Jose, United States
RF Front end is our own longer reach (>6") design with better functionality. RF noise probing. 10+ More units available price is per One Unit. Base footprint: ... more1.50" X 2.00". this positioner with probers Including: Summit 12K, S-300, Elite 300, Signatone (1160 and Checkmate series).
$
400.00
Buy It Now
$12.00 Shipping
Condition: Used
Location: Richardson, United States
$
4499.99
Buy It Now
$145.10 Shipping
Condition: New – Open box
Location: Phoenix, United States
29 pt RTD Sensors. Connection: D-type, high density, sub-miniature with 64 pins. (2 connectors for 18-34 sensors per wafer.). Wafer Size: 300 mm. Accessories ... morewith the Process Probe Lead Materials: Polyimide coated copper.
$
9500.00
Buy It Now
Condition: Seller refurbished
Location: Freehold, United States
Steel platen accepts DC/HP/CAP Positioners (magnetic or vacuum mount). Mitutoyo Microscope with three long working distance objectives, 2x, 10x, 20x and ... more10x eyepieces.
$
9894.50
Buy It Now
Condition: Seller refurbished
Location: North Billerica, United States
MICROMANIPULATOR 6000. MICROMANIPULATOR 6000 4" WAFER PROBE STATION. 2 Micro Manipulators. (1 YEAR WARRANTY ON PARTS). S erving the needs of Colleges ... moreand Universities worldwide.
$
5997.00
Buy It Now
Condition: Used
Location: Farmingdale, United States
Make: Signatone. Manual Wafer Probe Station. Model: S-251-6.
$
899.00
Buy It Now
$72.24 Shipping
Condition: Used
Location: Garland, United States
300mm wafer with 17 RTD points. All RTD points working. Wafer PN 1840A-12-5010A, SN 55812. It is to display the operational performance of the wafer .
$
500.00
Buy It Now
$43.54 Shipping
Condition: Used
Location: Wake Forest, United States
No other warranty implied.
$
749.00
Buy It Now
$82.24 Shipping
Condition: Used
Location: Garland, United States
300mm wafer with 17 RTD points. One RTD point (13) NOT working. Wafer PN 1840A-12-5180A, SN 53289. It is to display the operational performance of the ... morewafer . Process Probe™ 1840.
$
749.99
Buy It Now
$15.15 Shipping
Condition: Used
Location: Leander, United States
Manufacturer:Cascade Microtech. Manufacturer: Cascade Microtech. (1) Cascade MPH Probe Holder. MPH series Micro Probe Holder. Notes:This probe holder ... moreis in Good working condition. All the dials turn smoothly with light fingertip pressure.
$
749.99
Buy It Now
$15.15 Shipping
Condition: Used
Location: Leander, United States
Manufacturer:Cascade MicroTech. Manufacturer: Cascade Microtech. (1) Cascade MPH Probe Holder. MPH series Micro Probe Holder. Notes:This probe holder ... moreis in Good working condition. All the dials turn smoothly with light fingertip pressure.
$
4500.00
Buy It Now
$69.99 Shipping
Condition: Used
Location: Santa Clara, United States
6035-150 TMA-2TC.
$
500.00
Buy It Now
$43.54 Shipping
Condition: Used
Location: Wake Forest, United States
No other warranty implied. ITEM#1005273.
$
380000.00
Buy It Now
Condition: Used
Location: Morgan Hill, United States
38 sets of EG 2001 wafer probe.
$
4500.00
Buy It Now
$69.99 Shipping
Condition: Used
Location: Santa Clara, United States
$
291900.00
Buy It Now
Condition: Seller refurbished
Location: North Billerica, United States
Well suited for University Nanotechnology lab or R&D facilities All machines listed below will be refurbished and shipped in good condition. Fully ... moreoperational. Allow 8-12 weeks for delivery 4" 100mm) wafer fab for 1 micron geometries Diffusion furnace. 3 tube(custom gas cabinet quoted separately) PVD Electron beam evaporator with 4 pocket gun Table top RIE(Reactive Ion Etcher) Programmable photo resist spinner 4" mask aligner. 1 micron resolution(shown in photo) 400x microscope with dark field(1) 4 foot polypropylene wet station with hotplate and(1) 6 foot polypropylene wet station with hotplate Profilometer Plasma asher High resolution probe station with 2 probes Spin rinser dryer Wire bonder Die bonder Die shear/pull tester High temperature vacuum oven(400c for wafers) Vapor prime oven Hepafilter oven We accept Purchase Orders from Universities and Colleges Call us for details and photos at 978-771-0481 FREE SHIPPING IN THE US MAINLAND.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-146c01a6aab-0x117-
$
75000.00
Buy It Now
Condition: Seller refurbished
Location: Freehold, United States
Cascade Microtech S300 semi-automatic and manual RF/Microwave Probing System. The S300 supports wafer sizes and shards from 0.5 in. (1 mm) all the way ... moreup to 12 in.
$
35000.00
Buy It Now
Condition: Used
Location: Morgan Hill, United States
We sell the ELECTROGLAS EG 4085X wafer probe or prober at fully refurbished.Complete,working condition to OEM spec. The system is in our Santa Clara facility. ... moreLead time is 6 weeks against official PO and payment. The valid term is subject to sales.Please contact us for availability. Here is the configuration for the system for your reference.The actual configuration will be specified in our official quotation. Wafer Size Range: 200 mm Cassette to Cassette Temperature Control Chuck optional Automatic Alignment OCR Camera Weight: 850 lbs Installation with warranty is optional at extra cost. We also have the following.Please contact us for availability. EG 2001 probe* EG 4085 probe* EG 2080 probe* EG 2010 probe PLEASE NOTE: WE ARE SELLING ALL ITEMS AT"AS-IS" We have good source for the following used semiconductor equipment and New Semiconductor Equipment/ System. Please contact us by e-mail for more information.We will do our best to meet your budget. Rapid Thermal Process: AG Associates Heatpulse 610 | Heatpulse 410 | Heatpulse 210 Plasma Asher Descum: Matrix 105R | Matrix 105/205/106 | Branson IPC L3200 |Branson IPC 2000/3000/4000 | Gasonics L3510 | Gasonics Aura 1000 | Gasonics Aura 3010 | Gasonics Aura 2000LL Plasma Etch/RIE/ICP: Tegal 901e | Tegal 903e |Tegal 901e TTW | Tegal 903e TTW | Lam Rainbow 4420/4428 | Lam Rainbow 4520/4528 | Lam Rainbow 4620/4628 | Lam Rainbow 4720/4728 | Lam AutoEtch 490 | Lam AutoEtch 590 | Lam AutoEtch 690 | Lam AutoEtch 790 | Matrix 303 | Gasonics AE 2001 | STS Multiplex ICP Sputtering Deposition System: AccuSputter AW 4450 | Perkin Elmer 4450 Sputter | Perkin-Elmer 4410 | Perkin Elmer 2400 Sputter Systems Metrology and Tester: Tencor M-Gage 300 | Hitachi CD-SEM 8840 | Hitachi CD-SEM 8820 | Hitachi FE-SEM 4700 | Hitachi FE-SEM 4500 | HP 4062UX Tester | HP 4145A/B Tester | EG 2001 Wafer Probe | EG 1034 Wafer Probe Please Note: We do not arrange the shipment overseas. For international shipping. Please send us your account(FEDEX) or ask your forwarder to pick up the item
$
195.00
Buy It Now
$148.54 Shipping
Condition: For parts or not working
Location: Hurricane, United States
Item sold as/is for parts or repair. Item has minor scuffs and scratches from general use. (SEE PICTURES).
$
38000.00
Buy It Now
Condition: Used
Location: Morgan Hill, United States
Can talk about the price depending on the original condition.
$
2950.00
Buy It Now
Condition: Used
Location: Freehold, United States
Probe card holder for the Summit and the S300 Cascade wafer probers.
$
499.99
Buy It Now
$14.95 Shipping
Condition: Used
Location: Leander, United States
Manufacturer:Cascade Microtech. Manufacturer: Cascade Microtech. (1) Cascade MPH Probe Holder. MPH series Micro Probe Holder. Model:Micro Probe Holder. ... moreNotes:This probe holder is in Good working condition.
$
1610.18
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Albuquerque, United States
The physical condition is good, but there may be signs of previous use and handling. These products are subject to export restrictions under U.S. law. ... moreSerial numbers or country of manufacture may vary.
$
75000.00
Buy It Now
Condition: Seller refurbished
Location: Freehold, United States
12" wafer Prober. The S300 supports wafer sizes and shards from 0.5 in. (1 mm) all the way up to 12 in. design de-bug or IC failure analysis, the S300 ... moreprobe station has the precision and versatility.
$
500.00
Buy It Now
$38.00 Shipping
Condition: Used
Location: Richardson, United States
$
1201.20
Buy It Now
$600.00 Shipping
Condition: For parts or not working
Location: Ventura, United States
Click here to see description.
$
199.99
Buy It Now
$15.85 Shipping
Condition: For parts or not working
Location: Valencia, United States
1 GGB Industries Picoprobe 18B Wafer Probe. 1 GGB Industries PicoProbe Model 12B Active Microprobe. 2-0 top GGB box.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
Signatone wafer probe station-analytic probing station
Signatone wafer probe station-analytic probing station. S-1000. Appears to be a nice unit. Does not include any micromanipulators. Will ship with what is seen in photos only. This item was purchased for resale and was NOT used by seller. This item can be previewed and inspected by appointment only at our location in Glendale. AZ. If you have any questions, please call us at(602) 618-8452. Please ask ALL questions prior to bidding! These units are sold" As-Is" with"N o Warranties" and"A ll Sales are Final" Payment by Pay Pal or Credit Card. NOTE: Arizona Residents are responsible for sales tax. Unless, you send proof of resale certificate. Please email us for shipping quote if outside the continental US. Shipping Information: Pick-up location: Glendale. AZ(Located just West of Phoenix, AZ. Buyer releases Desert ... moreSilicon LLC from any liabilities from this unit. All liabilities will be the responsibility of the buyer. Merchandise must be paid for within 3 days. Good Luck and Happy Bidding! EMAIL: Surplus Materials and Equipment are sold as is and Desert Silicon shall not be liable for any use of misuse of this product.
GGB Industries Picoprobe 10-50/120-250-BECU-2R-700 Micro Manipulator Wafer Probe
GGB Industries Picoprobe 10-50/120-250-BECU-2R-700 Micro Manipulator Wafer Probe What you see what you get. One unit per order Condition: As pictured Please Note the following: 1. 20 days warranty. 2. If you have any questions regarding this item. Please contact me_before_ bidding. Expedited shipping can be arranged upon request. Other Notes of Interest S&H: Multiple items purchased will be considered for discounted shipping. Shipments: All items will ship within 48 hours of payment receipt.
MDC Mercury Probe, 6"/150mm wafer compatible
For Sale is One MDC Mercury(Hg) Probe Includes what is shown in the pictures above. MDC three function Mercury Probes allow rapid. Non-destructive contact to semiconductors and oxides for room-temperature measurements. All probes have coaxial mercury dot and ring contacts and a stainless steel back contact. All probes use a safe, vacuum mercury delivery system. Probes include controller with vacuum pump, cables, and comprehensive operator's manual. Mercury is not included. The Mapping Mercury Probe allors precise manual positioning of a sample, using vernier controls. Typical Applications: SiC, GaAs, 2DEG, GaN, InP, CdS, InSb and others! Characteristics: Size: Platforms exist in the 6' to 12' versions. Repeatability of Contact Area: 1.1% Dot Contact: Diameter of the mercury dot contact is nominally.030' 760um) Other sizes ... moreare available on request. Area Ratio: 48.6: 1, Contact Spacing: Nominally.015' 400um)
Electroglas EG 2001 Wafer Probe Inspection Station w/ 8" Prober Chuck, SVTR PPC
Template By Froo! SVTR Wafer Probe Inspection Station w/ 8" Prober Chuck. PPC& Olympus Microscope· WHAT IS IT? This listing is for(1) used Electroglas EG 2001 Wafer Probe Inspection Station w/ 8" Prober Chuck. PPC TC2000 Vision Module, Joystick& Olympus Microscope. This sale includes shown components ONLY. No other unseen parts or accessories will be included. DOES IT WORK? UNKNOWN(unit was purchased in a bulk of surplus equipment) We do not have the time. Equipment, or expertise to test it further. This means that it is being sold as-is. As-pictured with the assumption and understanding that additional calibration, parts or repairs may be required and should be expected. HOW’S IT LOOK? Fair. Older systems with some cosmetic scuffs or blemishes(see photos) CAN I RETURN IT? No. Returns will not be accepted for this item. ... morePlease as questions if needed and bid accordingly. Please read the terms below for more information on our store. Policies, and details specific to this listing. About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted Monday- Friday, 8am- 5pm PST at(760)806-6600. WE BUY SURPLUS TEST EQUIPMENT- MESSAGE US FOR DETAILS* Payment Our ordering system is fully automated and powered by eBay and PayPal Secure Servers. If you purchase an item through our official store your payment is due immediately upon checkout. Item(s) are also available for sale through channels other than eBay and from time to time may be sold before the eBay auction ends. In which case we reserve the right to end the auction early. We will accept PayPal. Company Check, Personal Check, Bank Check or Major Credit Card. All funds must be in US Dollars and unsecured funds must clear p
C88127 Signatone Semi-Automatic Wafer Prober Probe Station for parts/repair
C88127 Signatone Semi-Automatic Wafer Prober Probe Station for parts/repair(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C88127 This Signatone Semi-Automatic Wafer Prober Probe Station looks to be in decent cosmetic condition. Showing some signs of wear. It appears to be missing its nameplate, so I do not know the model or serial numbers. It is missing a few of its buttons. I plugged it in, and it powered up, and the power switch illuminates, but I could not get it to do anything else. It did not seem to respond to any of the buttons. It does not include a microscope or a chuck. It does feature an X-Y Stage with Linear Encoders, but the X-Axis(side to side) gets stuck at about the half-way point when moving it to the left. It is being sold as-is, ... morefor parts or repair. Approximate overall unpacked dimensions: 18"H x 33"W x 26"L. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. Shipping. Buyer pays a fixed handling fee of $20.03(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Buyer has the choice of arranging for pickup. Or requesting a shipping quote after the auction ends. Winning bidders of freight items should complete the checkout process and will be billed for shipping after we have received quotations from our carriers. The unpacked weight of this item is 151.00 Pounds Freight Shipments: Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this timeframe. The rate will expire. We reserve the right to requote the freight charges in the event of a payment delay. Auction Terms. Upon end of auction. The winning bidder should proceed to"Check Out" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(excep
Signatone Manual Wafer Prober Station: 4" Chuck, Probe Positioner & Nikon Scope
Template By Froo! Signatone Manual Wafer Prober Station: 4" Chuck. Probe Positioner& Nikon Scope· WHAT IS IT? This listing is for(1) used Signatone Manual Wafer Prober Station: 4" Chuck. 2) Probe Positioners& Nikon EPOI 731211 0.5X Scope with light source, M3 0.11 Objective, and HKW10XEP eye pieces. This sale includes shown components ONLY. No other unseen parts or accessories will be included. Normal 0 false false false EN-US X-NONE X-NONE· DOES IT WORK? UNKNOWN(unit was purchased in a bulk of surplus equipment) All the mechanical features are operational but we do not have the time. Equipment, or expertise to test it further. This means that it is being sold as-is. As-pictured with the assumption and understanding that additional calibration, parts or repairs may be required and should be expected. HOW’S IT LOOK? ... moreFair. Some minor cosmetic scuffs or blemishes(see photos) CAN I RETURN IT? No. Returns will not be accepted for this item. Please ask questions if needed and bid accordingly. Please read the terms below for more information on our store. Policies, and details specific to this listing. Join Our Tharitis Newsletter! About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted Monday- Friday, 8am- 5pm PST at(760)806-6600. WE BUY SURPLUS TEST EQUIPMENT- MESSAGE US FOR DETAILS* Payment Our ordering system is fully automated and powered by eBay and PayPal Secure Servers. If you purchase an item through our official store your payment is due immediately upon checkout. Item(s) are also available for sale through channels other than eBay and from time to time may be sold before the eBay auction ends. In which case we reserve the right to end the auction earl
Cascade Alessi REL-4800A Manual Probe Station 8" Wafer Prober + Scope Objectives
Template By Froo! Cascade Alessi REL-4800A Manual Probe Station 8" Wafer Prober + Scope Objectives· WHAT IS IT? This listing is for(1) used Alessi REL-4800A Manual Probe Station 8" Wafer Prober with 8" Chuck. RCZ Remote Focus, AUC-11, MH-8272-120& MH-7267-54 Manipulator Postioner arms, Mitutoyo WX 10X/24 Ete pieces, light source, and(3) objectives: M Plan APO 2, 10, and 20, and Panasonic WV-PS10A Camera Drive with GP-KR222 Camera piece. The X-Y Platform Stage moves freely(but not loosely) from front to back and left to right, and the outside stage lifts up and down with a pull of the lever. In other words, all manual mechanical functions appear to be in acceptable condition. We also have tables. Dark box light chambers and other accessories that will be sold separately. Please visit our store or call(760)806-6600 if ... moreyou need assistance. This sale includes shown components ONLY. No other unseen parts or accessories will be included. DOES IT WORK? UNKNOWN. All mechanical functions have been tested and appear to be working properly. However. We have not looked closely at the scope nor do we have the expertise to test this system any further. Therefor, it is being sold as-is with the assumption and understanding that additional calibration. Parts or repairs may be required and should be expected. HOW’S IT LOOK? Good to Fair. Some cosmetic scuffs or blemishes(see photos) CAN I RETURN IT? No. Returns will not be accepted for this item. Please ask questions if needed and bid accordingly. Local pick-up or FREIGHT shipping only- if you require a custom built crate an additional fee will apply! Please read the terms below for more information on our store. Policies, and details specific to this listing. Join Our Tharitis Newsletter! About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in custom
Cascade Alessi REL-4100A Analytical Prober Manual Wafer Probe Inspection Station
Template By Froo! Cascade Alessi REL-4100A Analytical Prober Manual Wafer Probe Inspection Station· WHAT IS IT? This listing is for(1) used Alessi REL-4100A Manual Wafer Probe Inspection Station/ Analytical Prober with Bausch& Lomb(B&L) Microscope. Light Source and(3) objectives: 0.4, 8 and 25X. There is no chuck. The X-Y Platform Stage moves freely(but not loosely) from front to back and left to right, and the outside stage lifts up and down with a pull of the lever. In other words, all manual mechanical functions appear to be in acceptable condition. We also have objectives. Tables. Dark box light chambers and other accessories that will be sold separately. Please visit our store or call(760)806-6600 if you need assistance. This sale includes shown components ONLY. No other unseen parts or accessories will be included. DOES ... moreIT WORK? UNKNOWN. All mechanical functions have been tested and appear to be working properly. However. We have not looked closely at the scope nor do we have the expertise to test this system any further. Therefor, it is being sold as-is with the assumption and understanding that additional calibration. Parts or repairs may be required and should be expected. HOW’S IT LOOK? Fair. Some cosmetic scuffs or blemishes(see photos) CAN I RETURN IT? No. Returns will not be accepted for this item. Please ask questions if needed and bid accordingly. Local pick-up or FREIGHT shipping only- if you require a custom built crate an additional fee will apply! Please read the terms below for more information on our store. Policies, and details specific to this listing. Join Our Tharitis Newsletter! About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted M
Micromanipulator 6000 Manual Prober Wafer Probe Station + Olympus Microscope
Template By Froo! Micromanipulator 6000 Manual Prober Wafer Probe Station + Olympus Microscope· WHAT IS IT? This listing is for(1) used Micromanipulator 6000 Manual Prober/ Wafer Probe Station with Olympus microscope. K20X eye pieces, 6, 20, and100X objectives, light source, and no chuck assembly. This sale includes these listed components ONLY. No other unseen or unmentioned parts or accessories will be included. DOES IT WORK? T he prober is missing parts and is not a complete working system. This means that it is being sold for parts or repair with the understanding that additional parts. Calibration or repairs will be required. HOW’S IT LOOK? Fair. Older machine with cosmetic scuffs and blemishes(see photos) CAN I RETURN IT? No. Returns will bot be accepted. Please bid accordingly. Please read the terms below for more information ... moreon our store. Policies, and details specific to this listing. Join Our Tharitis Newsletter! About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted Monday- Friday, 8am- 5pm PST at(760)806-6600. WE BUY SURPLUS TEST EQUIPMENT- MESSAGE US FOR DETAILS* Payment Our ordering system is fully automated and powered by eBay and PayPal Secure Servers. If you purchase an item through our official store your payment is due immediately upon checkout. Item(s) are also available for sale through channels other than eBay and from time to time may be sold before the eBay auction ends. In which case we reserve the right to end the auction early. We will accept PayPal. Company Check, Personal Check, Bank Check or Major Credit Card. All funds must be in US Dollars and unsecured funds must clear prior to shipment. We will accept wire transfers for an additional
Rucker & Kolls 240 Manual Probe Station Wafer Semiconductor Analyzer Tester #2
Search our eBay Store! Rucker& Kolls 240 Manual Probe Station Wafer Semiconductor Analyzer Tester#2 SKU: JV-MAT-B-WAFERPROBE240 Condition: For parts or not working Packaging: OEM Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Rucker& Kolls 240 Manual Probe Station Wafer Semiconductor Analyzer Tester*AS-IS FOR PARTS OR REPAIR* Model: 240 Physical Condition: Good. Minor scuffs/scratches/sticker residue and signs of use. Some rust is present on part of the unit. Unit appears to be incomplete. Please see photos. Functionality/Degree of Testing: Unit powers on with indicator light. We do not have the necessary resources ... moreto further test this unit. Dimensions(L" x W" x H" 15*13.75*11.25 BEING SOLD AS-IS FOR PARTS OR REPAIR. THE FDA DISCLAIMER BELOW IS ONLY FOR MEDICAL DEVICES. SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shi
HyperVision Visionary 1 Inspection System, With Alessi 4100-A Wafer Probe
Applied Materials HyperVision Visionary 1 Inspection System. Alessi 4100-A Wafer Probe W/ Storage Enclousre. Comes w/ 2) Alessi ECJ-06. 1) Compaq Deskpro 386/20e(1) Sony color video printer UP-5000. Subject to prior sale! Photos show everything that is included. For more information. Or to contact us, please feel free to visit our ME page. 14 day Right of Return if not satisfied. Thanks for looking! Please visit our store for more great items! 8786- BLDG 3 Floor
Karl Suss PM-8 Analytical Wafer Prober Manual Probe Station +6" Temptronic Chuck
Template By Froo! Karl Suss PM-8 Analytical Wafer Prober Manual Probe Station +6" Temptronic Chuck· WHAT IS IT? This listing is for(1) refurbished Karl Suss PM-8 Analytical Wafer Prober. This manual Probe Station(serial number 4321) has the long rail bridge mount option with Fine Motion Adjustment. It comes with the following: 6" Temptronic ThermoChuck with mini-chamber and Karl Suss Air Dryer Mitutoyo Microscope with WF10x/24 Eye Pieces. M Plan APO x2, 10, and 20 Objectives, and LampLink Illuminator(fiber cable not included) Anti-Vibration Isolation Pillars NetzGerat EA-3008/24 Power Supply*This sale includes these listed components ONLY. No other unseen or unmentioned parts or accessories will be included. DOES IT WORK? YES The PM-8 Prober was serviced in September 2013 and all mechanical components are functioning properly. ... moreMeaning the bridge mount, stage, and chuck all move firm and freely as they are supposed to. Any damaged or worn components have been replaced. The rest of this system has been checked as follows: The power supply powers on and controls the stage as intended. No other testing performed The illuminator powers on but we do not have the fiber cable to test it further The air dryer powers on and does not display any errors. But it have not been tested any further The Microscope and objectives have no sign of obvious damage and are believed to be in good working order This is a near-complete system. But additional parts, labor, calibration, and/or installation may be required and should be expected. We are NOT guaranteeing that this sale includes everything that YOU may need to get up and running at your facility, but we warranty the PM-8 Probe Station is fully functional and will be professionally packaged and shipped so that it works as intended upon delivery. All other components are being sold as-is, as-pictured with no warranty. HOW’S IT LOOK? Good, some minor cosmetic scuffs or blemishes(see photos) HOW WILL THIS SHIP? Freight or local pickup only. 1) skid with wrap include
Signatone S-1007 Wafer Probing Prober Probe Station with Temptronic Chuck
Signatone S-1007 Wafer Probing Prober Probe w/ TempTronic Chuck For sale is a Signatone S-1007 Wafer Probe Station with TempTronic Chuck with Bausch and Lomb Microscope. Note: Please feel free to call or email with any questions. We would be happy to provide additional information. tkole@shadowmicrotek.com 408 705 0172 Shipping Shipping charges are the responsibility of the buyer. We can provide assistance with providing options for freight providers for the loading and shipment of this item. Payment Methods Accepted Wire Transfer or Company Check payment methods are preferred. PayPal can be used but is subject to an additional 2.9% fee. All payment methods are subject to clearing into our account prior to shipment of the oven.
Pair of Alessi Wafer Probes NICE CONDITION for Wafer Probe Station
Nice Matched Pair of Alessi(Now Cascade Microtech) Micro-positioners/ manipulators for use on a Wafer probe station for DC/ Low frequency probing. They measure are about 6-1/2 inches in overall length X 2 inches wide X 2-1/4 inches tall not including adjustment knob or positioning joystick. These have a magnetic base for use on a probe station with a steel platen-mounting surface. These 2 manipulators were originally purchased as a set and have consecutive Serial Numbers(098914& 098915) Some extension arms/ needle holders with needle probes ARE included as shown in last pictures. What you see is what you get except for the ruler in the picture. These items are beautifully constructed and are in good– very good overall physical and mechanical condition. Please note that I am selling these items as USED. STRICTLY AS-IS. I ship within 3 ... moredays of receipt of funds. CALIFORNIA residents pay sales tax. Item will ship upon receipt of guaranteed funds. PayPal Will ONLY be accepted from users with a CONFIRMED ADDRESS* AND* the Item MUST ship to that SAME ADDRESS.
Cascade Microtech SUMMIT 12k Wafer Probe Station: 200mm Semi-Automatic 8" Prober
CASCADE SUMMIT 12K PROBE STATION*Call(760) 806-6600 to RENT this item* DESCRIPTION The Summit™ series of semi-automatic probe systems. With PureLine™ and AttoGuard® technology, allow you to access the full range of your test instruments for 200 mm and 150 mm wafers. Whatever your application: RF/Microwave, device characterization, wafer level reliability, e-test, modeling, or yield enhancement, Summit series platforms lead the industry in on-wafer measurements. Summit series probe stations are easy to configure with your choice of measurement performance, chuck size, thermal range and microscope options. All platforms are-60°C to 300°C compatible to ensure an upgrade path to meet your future needs. Cascade Microtech provides many accessories for the Summit platform for a wide range of applications to suit your unique test needs. ... moreThe Cascade Microtech SUMMIT 12000B series Prober features: Best solution for low-noise and 1/f measurements with advanced PureLine. AutoGuard and MicroChamber® technologies Minimize AC and spectral noise with effective shielding capability, Precision linear-motor for accurate positioning with temperature compensation and automated XYZ and theta correction for enhanced positioning accuracy, Unattended testing over multiple temperatures with VueTrack™ technology and High-Temperature Stability(HTS) enhancement, eVue™ digital imaging system with enhanced optical visualization. Fast set up, and in-die and wafer navigation, Powerful automation tools. Such as automatic die-size measurements and wafer alignment, The SUMMIT 12K offers flexibility and application-tailored solutions: RF/ Microwave device characterization. 1/f, WLR, FA and design debug. Complete solution for small- and large-area multi-site probe cards, Hands-Free microscope remote control. Arm rest, and quick-access control panel. Quick and comfortable wafer access via locking roll-out stage, Notes/ Included Options 12971B- Cascade Summit 12K. Model 12971B, NUCLEUS 3.3.6- Nucleus SW. Ver. 3.3.6, ATTO- Micro Cham
Micromanipulator XYZ Wafer Probe Positioners 2ea, Left/Right w/Magnet Base 6.5"
These are Micromanipulator brand XYZ Wafer Probe Positioners with Magnetic Bases. They are basically the same only mirror image of each other. Overall length is 6-1/2" These are in good shape. The adjustment controls are functional however one is missing the screw on tip(like a pen vise) that holds the probe tip. They have the numbers#1069 and#774 on the face. 14 DAY RETURN PRIVILEGE If we have made a mistake in the description so that your purchase is not as described. Or if your item is damaged in shipping we will gladly accept your return if sent within 14 days after you receive it. We will immediately refund your full purchase price including original shipping and we will reimburse you for the return shipping as well. Note: RETURN PRIVILEGE AND SHIPPING AMOUNTS GIVEN ARE VALID ONLY FOR SALES WITHIN THE CONTINENTAL UNITED STATES- ... moreCall for details if not in the US. We prefer Paypal payment within 3 days of auction close unless arrangements are made in advance. We will leave positive feedback right away. And hope that you will do the same once you've received the item and are happy with the transaction. We ship to most countries. However, please contact us to be sure we can ship to you and to determine shipping amount We will usually ship within 1-2 days of receipt of payment. NO RESERVE and NO BS! If you have any questions please call Jan 408-393-9418. Powered by SixBit's eCommerce Solution
Lot of 10ea Wafer Probe Micropositioners/Inkers/bases, 3-1/2"
This is a lot of 10 Probe Micropositioners. 5 are the base units and there are 3ea that have the tips for holding the probes and 2ea are apparently inkers. The base units are approx 3-1/2" Please study the pictures as the manufacturer is unknown. 14 DAY RETURN PRIVILEGE If we have made a mistake in the description so that your purchase is not as described. Or if your item is damaged in shipping we will gladly accept your return if sent within 14 days after you receive it. We will immediately refund your full purchase price including original shipping and we will reimburse you for the return shipping as well. Note: RETURN PRIVILEGE AND SHIPPING AMOUNTS GIVEN ARE VALID ONLY FOR SALES WITHIN THE CONTINENTAL UNITED STATES- Call for details if not in the US. We prefer Paypal payment within 3 days of auction close unless arrangements are made ... morein advance. We will leave positive feedback right away. And hope that you will do the same once you've received the item and are happy with the transaction. We ship to most countries. However, please contact us to be sure we can ship to you and to determine shipping amount We will usually ship within 1-2 days of receipt of payment. NO RESERVE and NO BS! If you have any questions please call Jan 408-393-9418. Powered by SixBit's eCommerce Solution
Two Micromanipulator MM Signature XYZ micro probe fine positioner wafer test
Micromanipulator You are bidding on two XYZ positioner. One has marking of Micromanipulator MM and the other has marking of signature. Unable to test. These look like from the 1980's See what previous buyers have said about their purchase with us and bid with confidence: Amazing service& product- GREAT communication. I highly recommend this seller! Buyer: Unit exactly as described. No issues at all, fast shipping, smooth transaction! Buyer: Item as described. A++ all the way, thanks a ton!Buyer: Thank u for the fast shipping. Item works great, thanks once again Buyer: Super fast fast fast shipping. Perfect descrip. Saved a ton of $$$! Thanks! Buyer: pimlico1825( 561) Items arrived as described. Fast shipping, thanks Buyer: nik-cam( 621) Great job supper fast shipping Buyer: hunter397( 71) Great Seller. 100% Satisfied, Thank you!Buyer: ... moreyourmobilestore( 412) Quality product and an excellent price. With speedy delivery. A+++++++++++Buyer: heymjln( 223) What you will receive: Two XYZ positioners as pictured Shipping: Shipping charges are not refundable. If payment is received the same day auction closes. Your order will be shipped within 24 hours or sooner. Tracking number is provided Delivery Confirmation Number: FREE Payment: ONLY Paypal is accepted. No Checks please. Payment must be received within 3 days after auction close. Paypal: Will only ship to your paypal address OR other location with PRIOR APPROVAL. Local Pickup: No local pickup please. Warranty: Sold AS-IS. All sales final Feedback Policy: Our goal is to give all buyers a 5 star transaction in all areas important to you and the survey feedback collected by ebay. Please let us know how we can improve. All feedbacks are welcome. If you are satisfied with your purchase. Please leave a feedback. Our goal is a satisfied customer and positive feedback for buyer and seller. I will answer all email questions within 6 hours. Thank-you and good luck.