Micromanipulator Micropositioner Kulicke Soffa Kulicke And Soffa Xyz Probe Positioner Machinist Machineshop Probe Positioner Cascade Microtech Micropositioner Probe Probe Station Micromanipulator Model Rucker Kolls Cascade Microtech Alessi Pull Tester Micromanipulator 3 Test Systems Micro Stop Sheetmetal Xyz Probe Positioner Micromanipulator Wafer Probe Air Vac Swiss Rework Board Machine Vac Swiss Rework Board Machine Nozzle Tools Electricians Avionics Micro Stop Sheetmetal Aircraft Tools Aviation Stop Sheetmetal Aircraft Tools Aviation Machinist 75000 Series Cymer Inc Unitek Miyachi Probe Head Probe Positioner Manipulator Rucker Kolls Model Aircraft Tools Aviation Sheetmetal Aircraft Tools Aviation Machinist Machineshop Kulicke Soffa Model Cascade Microtech Alessi Dcm100 Xyz Probe Microtech Alessi Dcm100 Xyz Probe Positioner Cascade Microtech Dcm Karl Suss Assy Stk Cutter Endmills Machinist Machineshop Tools Aviation Hi Lok Aircraft Aviation Tools Electricians Air Bearing Load Shear Tester Wentworth Labs Zephir Micro Stop Sheetmetal Aircraft Tools Micro Manipulator Canon Plug Pliers Cascade Microtech Summit Wire Bonding Micromanipulator 6200 Manual Probe Hand Ratchet 30 Day Warranty 60 Day Warranty Aircraft Tools Applied Materials Board Pcb Body Shop Bonding Pull Circuit Board Day Warranty Force System Handler Hard Drive Hdd Hi Lok Installed Hp Agilent Ingersoll Rand Lorlin Tested System Machine Magnetics Base Metal Seal Microscope Perkin Elmer Pick And Place Machine Positioner Power Supply Sata Selant Guns Sheetmetal Hi Lok Stainless Steel Table Temperature Force Tested Head Tested Station Tested System Wafer Tested Wire Bonders Rvsi Gauge Control Ball Bonders
 In 
 
Order by: 
Available to: 
Price: 
 - 
$
4999.00
9d 21h 2m 25s
0 bids
$6650.00 Now
Condition: Used
Location: Dublin, United States
Karl Suss MJB-3 Mask Aligner 500 watts, computer. needs optics and other items.
$
2000.00
Buy It Now
Condition: For parts or not working
Location: Mundelein, United States
Karl Suss PA6 Wafer Probe Station, Bausch & Microscope. 2 units are available. The price is for one unit. Sold as it is. The cabinet is not included
$
500.00
Buy It Now
Free Shipping
Condition: Used
Location: Dallas, United States
SUSS RF Microwave positioner PH250 3um resolution.
$
1000.00
Buy It Now
Condition: For parts or not working
Location: Rehoboth, United States
KARL SUSS KG RC8 SPIN COATER. Model RC 8 MS 3, serial no. RC2667, made in France. Mfg. info sheet on file.
$
3950.00
Buy It Now
Condition: For parts or not working
Location: Rehoboth, United States
Karl Suss Kg MASK ALIGNER TYPE 1169901. WE CAN HELP ARRANGE.
$
4500.00
Buy It Now
$700.00 Shipping
Condition: For parts or not working
Location: Canada
C98958 Karl Suss MJB3 Standard Mask Aligner w/ Splitfield Microscope type 401000(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) ... moreClick to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C98958 This Karl Suss MJB3 Standard Mask Aligner with Splitfield Microscope(type 401000. S/n 1127) looks to be in good cosmetic condition, showing some minor signs of wear. It powers up, as does the illuminator. However, this is the extent of my testing of it, and it is being sold as-is. We recommend having this system crated for shipment, the cost of which will be the responsibility of the buyer. Approximate overall unpacked dimensions: 24"L x 22"W x 23"H. Here are links to a couple more pictures: Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 0.00 Pounds Buyer pays freight plus a fixed handling fee of $20.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calen
$
5000.00
Buy It Now
Condition: For parts or not working
Location: Gilroy, United States
The eyepieces are 10X W.F.
$
10000.00
Buy It Now
Condition: For parts or not working
Location: Gilroy, United States
"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. I loosened all of ... morethe bolts to the vacuum chamber, but I was unable to get it open.
$
3150.00
Buy It Now
Condition: Used
Location: Hollister, United States
It shows signs of use and handling, such as, minor scuffing and scratching. Otherwise, the physical condition of the unit is good and clean. It was removed ... morefrom a Karl Suss 116AA002 Top-side Mask Aligner.
$
1249.90
Buy It Now
Free Shipping
Condition: Used
Location: South Korea
$
429.90
Buy It Now
Free Shipping
Condition: Used
Location: South Korea
KARL SUSS MA6 COLD LIGHT MIRROR UV400.
$
499.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Phoenix, United States
Karl Suss MicroTec 260PC115/614PC115 Card/Module/Board 01.26010593 for Mask Aligner Model MA 150 Comes with and what you see in the pictures. If you don't ... moresee it. You probably wont get it. Specifications are from a 3rd party and may vary slightly due to upgrades. Options, or revisions this unit may or may not have. This unit is believed to be NEW. Old stock from Intel surplus. The Board's Information Reads: 614PC115 Revision: 02 Serial Number: 3053 The Tag with the Unit Reads: Part Number: 260PC115 The Tag on the Bag Reads: Part Number: 01.26010593 For More Pictures Please Click the Following: For Domestic Customers: Packaging. Handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $10.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination. If you have any questions please call Michael at 1-866-MHZ-ELEC(1-866-649-3532) Toll Free. Also. Please to view or other auctions! 03/07/12 Powered by The free listing tool. List your items fast and easy and manage your active items. On Oct-31-13 at 21:13:16 PDT. Seller added the following information: Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
$
450.00
Buy It Now
$37.01 Shipping
Condition: Used
Location: Wake Forest, United States
Previously used in a Karl Suss MA6.
$
3000.00
Buy It Now
$84.41 Shipping
Condition: Used
Location: Bosque Farms, United States
We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. ... moreIf one is pictured it is for testing purposes only unless it is atta.
$
175.00
Buy It Now
Free Shipping
Condition: New
Location: Temple, United States
Karl Suss MA150 Mask Aligner Lift Assy. Set of 2ea.
$
595.00
Buy It Now
Free Shipping
Condition: Used
Location: Temple, United States
$
4199.90
Buy It Now
Free Shipping
Condition: Used
Location: South Korea
KARL SUSS MA200 ZE1000GVP/202516 UV Lamp housing.
$
599.90
Buy It Now
Free Shipping
Condition: Used
Location: South Korea
SEMIPARTS SOLUTION.
$
3950.00
Buy It Now
Condition: Used
Location: Hollister, United States
This sale is for a Karl Suss iEi PAC-106GW-R21 Computer, which is used working surplus. The physical condition of the computer is good and clean. It was ... moreremoved from a Suss ACS200 Coater system. System removed from: Suss ACS200 Coater.
$
1085.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Hudsonville, United States
$
549.90
Buy It Now
Free Shipping
Condition: Used
Location: South Korea
SEMIPARTS SOLUTION.
$
449.90
Buy It Now
Free Shipping
Condition: Used
Location: South Korea
$
8000.00
Buy It Now
Condition: For parts or not working
Location: Sherman Oaks, United States
It will need a good cleaning and inspection before use. I am not sure that it has a lamp in it or if it does have a lamp if the lamp is working. It is ... morelocated in Sherman Oaks, CA just outside of Los Angeles and will need to be picked up.
$
2499.90
Buy It Now
Free Shipping
Condition: Used
Location: South Korea
$
1754.33
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
Karl Suss 200.0644.6 CHUCK 6" SUSS Used. This Karl Suss 200.0644.6 is used working surplus. The physical condition is good, but there are signs of previous ... moreuse and handling. Serial numbers or country of manufacture may vary.
$
1400.00
Buy It Now
Free Shipping
Condition: Used
Location: Hollister, United States
Karl Suss Kuhnke 65 127 Pneumatic Manifold 30 Solenoid Assy Suss 116AA002 Mask Aligner used working. This sale is for a Karl Suss Kuhnke 65.127 Pneumatic ... moreManifold 30 Solenoid Assembly, that is used working surplus.
$
1400.00
Buy It Now
Free Shipping
Condition: Used
Location: Hollister, United States
This sale is for a Karl Suss 165776 Mask Aligner 116AA002 Pre-Aligner (8” wafer size), that is used working surplus. The physical condition of the unit ... moreis good and clean. It was removed from a Karl Suss 116AA002 Top-side Mask Aligner.
$
1400.00
Buy It Now
Condition: Used
Location: Hollister, United States
Karl Suss 200AA04102 Top Side Aligner Microscope Assy Suss 116AA002 Mask Aligner (200mm) used working. This sale is for a Karl Suss 200AA04102 Top Side ... moreAligner Microscope (200mm), that is non-complete and is being sold as is for parts.
$
75.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Killeen, United States
Karl Suss Mask Aligner MA150 Inductive Proximity Sensor. Karl Suss Part#IFF 08.24.15/L.
$
210.00
Buy It Now
$9.00 Shipping
Condition: New
Location: Temple, United States
Model#260PC158. Karl Suss Microtech MA150 Mask Aligner.
$
1100.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Killeen, United States
P/N: 01005006. Karl Suss Mask Aligner MA150 Transport/Load Arm.
$
1600.00
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Killeen, United States
Karl Suss MA150 Mask Aligner Spares. Model#AL300. Part#0015PP.
$
375.00
Buy It Now
$22.13 Shipping
Condition: Used
Location: Wake Forest, United States
Karl Suss MJB3 chuck up to 2.00" wafers. Previously from a Karl Suss MJB3.
$
4500.00
Buy It Now
Condition: Used
Location: Hollister, United States
This sale is for a Karl Suss 614PC226 Circuit Board Rev 00, which is used working surplus. The physical condition of the board is good and clean. It was ... moreremoved from a Suss ACS200 Coater system. Model#: 614PC226.
$
399.90
Buy It Now
Free Shipping
Condition: Used
Location: South Korea
$
1250.00
Buy It Now
$160.05 Shipping
Condition: Used
Location: Toms River, United States
We will open an unpaid item case if we haven’t heard from you by then.
$
12499.99
Buy It Now
Condition: For parts or not working
Location: Phoenix, United States
Adapter Kit MA56 MPM GAASW-SPEC: for 50mm ±1mm dia. Wafer thickness max 630 microns. Position of the proximity balls adjustable between 30 mm and 2". ... moreTwo separated vacuum areas: one smaller than 8 mm, one between 20 and 32 mm, and the other ring system is switchable.
$
3950.00
Buy It Now
Condition: Used
Location: Freehold, United States
Cable ports for maintaining darkness while running cables into box. Light tight enclosure for wafer probers.
$
125.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Killeen, United States
Karl Suss Mask Aligner MA150 Inductive Proximity Sensor. Karl Suss Part#61000213. Balluff#BES 516-300-S170.
$
150.00
Buy It Now
Free Shipping
Condition: New
Location: Temple, United States
Karl Suss Microtech MA150 Mask Aligner.
$
315.00
Buy It Now
Free Shipping
Condition: Used
Location: Hollister, United States
This sale is for a Karl Suss Kuhnke 65.127 Pneumatic Manifold 4 Solenoid Assembly, that is used working surplus. The physical condition of the unit is ... moregood and clean. It was removed from a Karl Suss 116AA002 Top-side Mask Aligner.
$
3500.00
Buy It Now
Condition: Seller refurbished
Location: Freehold, United States
Light tight enclosure for wafer probers. Easy lift front panel.
$
350.00
Buy It Now
$22.13 Shipping
Condition: Used
Location: Wake Forest, United States
Karl Suss MJB3 chuck up to 1.25" wafers. Previously from a Karl Suss MJB3.
$
299.99
Buy It Now
$30.96 Shipping
Condition: For parts or not working
Location: Phoenix, United States
Karl Suss MA25/MA 25 Mask Aligner Integrator Board. Specifications are from Karl Suss and may vary slightly due to upgrades, options, or revisions this ... moreunit may or may not have. It is being sold as-is.
$
29000.00
Buy It Now
Condition: Used
Location: Freehold, United States
C98958 Karl Suss MJB3 Standard Mask Aligner w/ Splitfield Microscope type 401000(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) ... moreClick to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C98958 This Karl Suss MJB3 Standard Mask Aligner with Splitfield Microscope(type 401000. S/n 1127) looks to be in good cosmetic condition, showing some minor signs of wear. It powers up, as does the illuminator. However, this is the extent of my testing of it, and it is being sold as-is. We recommend having this system crated for shipment, the cost of which will be the responsibility of the buyer. Approximate overall unpacked dimensions: 24"L x 22"W x 23"H. Here are links to a couple more pictures: Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 0.00 Pounds Buyer pays freight plus a fixed handling fee of $20.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calen
$
399.99
Buy It Now
$30.96 Shipping
Condition: For parts or not working
Location: Phoenix, United States
Part Number: 21401128. Specifications are from Karl Suss and may vary slightly due to upgrades, options, or revisions this unit may or may not have. It ... moreis being sold as-is. The Unit's Information Reads.
$
1575.00
Buy It Now
Free Shipping
Condition: Used
Location: Hollister, United States
System removed from: Karl Suss ACS200 Coater Wafer Carrier Assembly. This sale is for a Cybor 25823-18 05026-00CL B Pump, that is used working surplus. ... moreThe physical condition of the pump is good and clean.
$
1400.00
Buy It Now
Free Shipping
Condition: Used
Location: Hollister, United States
This sale is for a Karl Suss ACS200 Coater Wafer Carrier Assembly, that is used working surplus. The physical condition of the assembly is good and clean. ... moreIt was removed from a Suss ACS200 Coater. System removed from: Karl Suss ACS200 Coater Wafer Carrier Assembly.
$
449.99
Buy It Now
$30.96 Shipping
Condition: For parts or not working
Location: Phoenix, United States
Specifications are from Karl Suss and may vary slightly due to upgrades, options, or revisions this unit may or may not have. It is being sold as-is. ... morePart Number: SMP-E212-A1 / C8451-A1-A201-2. Serial Number: 5654.
$
2950.00
Buy It Now
Condition: Used
Location: Freehold, United States
Light tight enclosure for wafer probers. Easy lift front panel. Cable ports on both sides of box.
$
250.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Canyon Lake, United States
$
499.99
Buy It Now
$30.96 Shipping
Condition: For parts or not working
Location: Phoenix, United States
Specifications are from Karl Suss and may vary slightly due to upgrades, options, or revisions this unit may or may not have. It is being sold as-is. ... more(1) Are you the end-user of this item?.
$
749.99
Buy It Now
$30.96 Shipping
Condition: For parts or not working
Location: Phoenix, United States
Part Number: 61401145. Specifications are from Karl Suss and may vary slightly due to upgrades, options, or revisions this unit may or may not have. It ... moreis being sold as-is. If you don't see it, you probably won't get it.
$
800.00
Buy It Now
$16.00 Shipping
Condition: Used
Location: Hollister, United States
Used Working. -New or Like New. Tested/Evaluated and Non-functioning. -Tested for Key Functions. -Tested for Full Function. Collectible Electronic. Specialty ... moreElectronic. R2/Ready for Repair.
$
6200.00
Buy It Now
$37.01 Shipping
Condition: Used
Location: Wake Forest, United States
Previously used in a Karl Suss MA6.
$
32500.00
Buy It Now
Condition: Used
Location: Freehold, United States
Ask sales person for available chucks and mask holders. 110V, 60 Hz.
$
7600.00
Buy It Now
$47.01 Shipping
Condition: Used
Location: Wake Forest, United States
Previously used in a Karl Suss MA6.
$
30000.00
Buy It Now
Condition: Used
Location: Santa Barbara, United States
MJB-3 Mask Aligner, 200 W. Good working condition.
$
1350.00
Buy It Now
$15.00 Shipping
Condition: Used
Location: Temple, United States
P/N: 05218. Karl Suss Microtech Z- Axis Drive Motor Assembly. Sanyo Denki 103-715-6 Stepping Motor.
$
2590.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Milpitas, United States
1 2 3
 In 

Former Listings  
 
Karl Suss PH150 Micromanipulator Micropositioner Probe head
Karl Suss PH150 Manual Micropositioner Probehead Vacuum base Stages accuate and move smoothly As with any used equipment it has a few surface scratches. Half of the vacuum hold down adjustment screw head is missing but it can still be adjusted. It appears to simply be a bored machine screw that had its head cut off and then the screw was slotted. 4 lbs shipping weight. Item is sold as shown We are unable to test the operation of the tool Photos show item you are bidding on All sales are final with no right of return or exchange. Ships only to US Item must be paid for within 3 days or it will be relisted DISCLAIMER OF WARRANTIES.THE EQUIPMENT DESCRIBED ABOVE, BEING SOLD, IS SOLD IN“AS IS” CONDITIONS AND THAT WE EXPRESSLY DISCLAIM HEREBY, ANY AND ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING FITNESS FOR A PARTICULAR PURPOSE. YOU’RE PAYMENT OF ... moreTHE GOODS AND EQUIPMENT INVOICED HEREON CONSTITUES ACCEPTANCE OF THIS DISCLAIMER Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
Micromanipulator Karl Suss KSM PH PM Series Micropositioner 130 / 150 Probe Head
Template By Froo! Micromanipulator Karl Suss KSM PH PM Series Micropositioner 130/ 150 Probe Head· WHAT IS IT? This listing is for(1) used Micromanipulator Karl Suss KSM PH PM Series Micropositioner 130/ 150 Probe Head. This sale includes shown components ONLY. No other unseen parts or accessories will be included. DOES IT WORK? We presume this item to be in good working order. However. We do not have the time, equipment, or expertise to test it further, which means that it is being sold as-is, as-pictured with the assumption and understanding additional calibration, parts or repairs may be required and should be expected. HOWS IT LOOK? Good to Fair. No major cosmetic scuffs or blemishes(see photos) CAN I RETURN IT? Yes. But returns will only be accepted if the item is damaged during shipment. Or you receive the wrong item all together(buyer ... moreprotection) Right of Return(ROR) is valid for 14 days after initial receipt of item and does not cover buyer’s remorse. Please read the terms below for more information on our store. Policies, and details specific to this listing. About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted Monday- Friday, 8am- 5pm PST at(760)806-6600. Payment Our ordering system is fully automated and powered by eBay and PayPal Secure Servers. If you purchase an item through our official store your payment is due immediately upon checkout. Item(s) are also available for sale through channels other than eBay and from time to time may be sold before the eBay auction ends. In which case we reserve the right to end the auction early. We will accept PayPal. Company Check, Personal Check, Bank Check or Major Credit Card. All funds must be in US Dollars
Karl Suss PH150 Manual Probe Head
Fiber Optic Tools and Supplies BUY | SELL | TRADE surpluseq.com Description, Karl Suss PH150 Manual Probe Head Used Used Karl Suss PH150 Manual Probe Head Product Type: Type@ Model/Part No:PH150 Our Item ID: 253255 Description Specific Details: This used Karl Suss Probe Head Micropositioner is in good physical condition. There are some scratches on the unit due to normal wear. There are two micrometers(0-10mm) for XY axis movement control. Unit will require additional micrometer for full operation. Unit will also require gasket for vacuum base to function properly. Kindly contact us if you have further questions regarding this item. Actual item shown. Sold as pictured. Condition: Product Type: Used Terms of sales: Sold As-Is Physical Condition: Good Working Condition: Partially Functional Tested Condition: Tested 2.00 | 8.00 x 8.00 x 8.00 ... more| 0. Manufacturer"s Product Information: Description: The SUSS line of manual probeheads offers the advantages of proven high quality. Superior mechanical and ergonomic design, and complete product line compatibility. The SUSS PH150 has proved to be the most accurate and robust positioner on the market. By using the finest precision components and expert assembly techniques. SUSS achieves true submicron positioning with zero backlash. The PH150 incorporates an independent and uninfluenced XYZ stage system which is free of mechanical cross-talk deviation. Each stage is made of hardened steel and precision cross roller bearings assembled under exact torque measurements. In addition to superior mechanical design. SUSS always adheres to detail regarding ergonomics and flexibility. Each axis has 10 mm of travel with 50 or 100-tpi(threads per inch) high-resolution screws. The Z-axis screw is ergonomically located at the rear of the probe head body so as not to transmit finger pressure to the probe needle on touch down. The user has the choice of a Z axis with left or right-handed threads. The PH150 vacuum base system has superior holding strength. The entire footprin
Karl Suss PM-8 Analytical Probe Station (with: Video, Laser, PH150/120 probers)
The sale includes all of the following items: 1) Karl Suss PM8(Type 11500085) 1/ea- objective) 100X/73 Nikon. 50X/45 CF Plan, 20X/35 Nikon, 10X/21 Nikon, 5X/13 CF. 2) CFI 10x/22 eye pieces(1) PM8 power supply[EA-3008/24] 1) Javelin video smartcam[JE3762DPS] 1) Javelin video control unit[JV2000] 1) Photonic Instruments optical fiber probe[2205] 1) Spectra Physics Laser. With pulse generator& foot peddle[337201-00] 1) LEP LTD power supply 6-12V. 1) Lens care kit(1 set) shipping hardware(1) Probe card probing fixture(1) 8" Ablation laser chuck& platon fixtures(1) Micromanipulator FET probe power supply[FET PS4] 1) PicoProbe arm- model 18C{serial# 12178} 1) PicoProbe arm- model 12C{serial# 10004} 1) PicoProbe arm- model 19C{serial# 11201} 3) Suss PH150/2 manipulators-vacuum base{serial# 53732. 57592, 53896} 1) Suss PH120 manipulators-vacuum ... morebase{serial# 24122} 2) PicoProbe tips[12C-4-35] 3) PicoProbe tips[12C-4-10] 3) PicoProbe tips[T-4-60] 5) PicoProbe tips[12C-4-22] 10) PicoProbe tips[T-4-22] 4) PicoProbe tips[18C-4-20]
Karl Suss Micromanipulator Micropositioner Probe head XYZ Stage
Karl Suss Micromanipulator Micropositioner Probe head XYZ Stage Used in very good condition. I'm not sure of the exact model number so please be sure to look at all of the photographs. This came from and R&D laboratory that made their own wafer handlers. They kept everything clean-room clean and this saw very little production use. Comes only with what you see in pictures. Items are guaranteed to be exactly as described. Comes with 14 day return policy. We want you to be satisfied with your purchases from us. WE HAVE MORE Turbo Pumps and Micromanipulators on eBay this week:
Karl Suss PM-8 Analytical Wafer Prober Manual Probe Station +6" Temptronic Chuck
Template By Froo! Karl Suss PM-8 Analytical Wafer Prober Manual Probe Station +6" Temptronic Chuck· WHAT IS IT? This listing is for(1) refurbished Karl Suss PM-8 Analytical Wafer Prober. This manual Probe Station(serial number 4321) has the long rail bridge mount option with Fine Motion Adjustment. It comes with the following: 6" Temptronic ThermoChuck with mini-chamber and Karl Suss Air Dryer Mitutoyo Microscope with WF10x/24 Eye Pieces. M Plan APO x2, 10, and 20 Objectives, and LampLink Illuminator(fiber cable not included) Anti-Vibration Isolation Pillars NetzGerat EA-3008/24 Power Supply*This sale includes these listed components ONLY. No other unseen or unmentioned parts or accessories will be included. DOES IT WORK? YES The PM-8 Prober was serviced in September 2013 and all mechanical components are functioning properly. ... moreMeaning the bridge mount, stage, and chuck all move firm and freely as they are supposed to. Any damaged or worn components have been replaced. The rest of this system has been checked as follows: The power supply powers on and controls the stage as intended. No other testing performed The illuminator powers on but we do not have the fiber cable to test it further The air dryer powers on and does not display any errors. But it have not been tested any further The Microscope and objectives have no sign of obvious damage and are believed to be in good working order This is a near-complete system. But additional parts, labor, calibration, and/or installation may be required and should be expected. We are NOT guaranteeing that this sale includes everything that YOU may need to get up and running at your facility, but we warranty the PM-8 Probe Station is fully functional and will be professionally packaged and shipped so that it works as intended upon delivery. All other components are being sold as-is, as-pictured with no warranty. HOW’S IT LOOK? Good, some minor cosmetic scuffs or blemishes(see photos) HOW WILL THIS SHIP? Freight or local pickup only. 1) skid with wrap include
Karl Suss PM-8 8" (200mm) Semi-Automatic Probe Station
Description: Karl Suss PM-8 Semi-Automatic Probe Station Item is used. But has been tested by Karl Suss certified service engineer. Accommodates up to 8” 200mm) Wafers Ambient DC Chuck Granite Base with FIne Glide Stage Mitutoyo Finescope with 10x Eyepieces. 2x, 10x, 20x Objectives Fiber Optic I lluminator Vacuum Manifolds Probe Card Holder 50mm x 50mm Motorized Microscope Movement Microscope Movement Control Electronics and Joystick New Windows PC with Monitor. Keyboard and Mouse, and Prober Bench Software Vibration Isolation Table Options: Installation and Training Available New Wave Research EZ Laze II Green/UV Available Karl Suss PH150 Micropositioners Available Shipping& Handling: Freight- contact us for shipping quote This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. ... moreare not included unless pictured or described. If you have any questions. Please contact us before purchasing. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14572b926e5-0x114-
Karl Suss CIC1000 Constant Intensity Controller For Mask Aligner 1000 Watt
Karl Suss CIC1000 Constant Intensity Controller For Mask Aligner 1000 Watt Good cosmetic condition. Guaranteed to be working perfectly. Packed professionally in Instapak 2 part foam for added shipping security! NO 3rd party shipping on buyer accounts California residents must pay 8.5% Sales Tax. Businesses purchasing for resale must provide CA state tax ID information. Payment is due within 7 days of auction's end. Buyer pays for shipping SEE BELOW. When possible. Multiple items will be shipped together to reduce shipping costs. Insurance for the amount of the auction is included in the shipping price. Flat fee shipping amounts apply to lower 48 states ONLY! OVERSEAS BUYER PLEASE CONTACT ME REGARDING ACCEPTED PAYMENT METHODS BEFORE MAKING A PAYMENT. If you need additional information or have any questions. Please contact me BEFORE placing ... moreyour bid. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Listing created with from Black Magik Software.
Karl Suss 2203 Optical Bridge with Vacuum Stage and B&L MicroZoom II 11500018
For sale is Karl Suss 2203 Optical Bridge with Vacuum Stage and B&L MicroZoom II 11500018. This is parts unit that was modified to work without the base. It comes with Optical Bridge Mount with B&L MicroZoom II High Performance Microscope with Lenses(30x; 50x; 20x; 1.5x) and Vacuum Stage. Crating and packaging is FREE. Shipping is about $100 within Cont. United States.
KSM KARL SUSS PH150 MANUAL PROBE MANIPULATOR HEAD WITH VACUUM BASE
NEVER USE STOCK PICTURES! Shipping Information Usually will ship within the next day after receipt of payment. Saturday shipping when possible. Will provide insurance for items valued over $20.00! Always glad to combine shipping International buyers please check customs charges. They are not included in shipping cost! International buyers please check shipping cost before bidding! First class can take up to 8 weeks to deliver. Only Canada can first class be tracked Payment Information We gladly accept PayPal Payment must be made within 3 business days Texas residents need to add 8.25% sales tax. PLEASE SEE PICTURES FOR DETAILS. IF IT IS NOT IN THE PICTURE, IT IS NOT INCLUDED! PLEASE ASK QUESTION BEFORE BIDDING! You are bidding on A KARL SUSS MANUAL PROBE MANIPULATOR PH150 VACUUM BASE Description: The SUSS line of manual probeheads offers ... morethe advantages of proven high quality. Superior mechanical and ergonomic design, and complete product line compatibility. The SUSS PH150 has proved to be the most accurate and robust positioner on the market. By using the finest precision components and expert assembly techniques. SUSS achieves true submicron positioning with zero backlash. The PH150 incorporates an independent and uninfluenced XYZ stage system which is free of mechanical cross-talk deviation. Each stage is made of hardened steel and precision cross roller bearings assembled under exact torque measurements. In addition to superior mechanical design. SUSS always adheres to detail regarding ergonomics and flexibility. Each axis has 10 mm of travel with 50 or 100-tpi(threads per inch) high-resolution screws. The Z-axis screw is ergonomically located at the rear of the probe head body so as not to transmit finger pressure to the probe needle on touch down. The user has the choice of a Z axis with left or right-handed threads. The PH150 vacuum base system has superior holding strength. The entire footprint is encompassed by a rectangular rubber lip. Actuation is controlled by a convenient. Bodymounted, easy touc