|
Vintage German Micrometer 75-100mm Keilpart Widia Hartmetall Auflage Part S.394
Up for bid is a vintage German Made Micro meter(75-100mm) which comes in its original box. I could not find out alot of information on this tool.most websites were in German and I could not find anything like it by the same maker. But here is all the information I could get off the tool itself. It appeas to be in great condition(see closeup images) On the handle on one side is a plate that reads: Keilpart(With the Keilpart emblem) and underneath reads Widia Hartmetall Auflage On the other side of the handle is a plate that reads: Spindelgewinde 75-100mm 1/100 Gehartet u. geschliffen There is an S. 394 stamped on the black metal part of the micrometer(I am assuming a part number) I am not familiar with how this tool works so it is being sold as is. I can tell you that all the dials spin. If you have further questions. Please do not hesitate ... moreto ask.
|
|
|
WIDIA GTD 11615 3/8-16 NC HS TAP SET !
UP FOR AUCTION: WIDIA GTD 11615 3/8-16 NC HS TAP SET. GENERAL CONDITION: PRE-OWNED. WORKING CONDITION: GOOD. COSMETIC CONDITION: GOOD. BRAND NAME: WIDIA GTD. MODEL# 11615. COLOR: SILVER. ITEM SPECIFICS: CONTAINS SOME VERY LIGHT SCRATCHES. ANY DEFECTS OR OBVIOUS DAMAGE: NO DAMAGE. THIS AUCTION INCLUDES: WIDIA GTD TAP SET ONLY. EVERYTHING COMES AS SHOWN IN PHOTOS! AUCTION WINNER: WHEN YOU RECEIVE YOUR ITEM. PLEASE CONTACT US IF YOU ARE UNHAPPY WITH THE DESCRIPTION OF THE ITEM. WE HOPE TO EARN YOUR 5 STAR POSITIVE FEEDBACK THROUGH GREAT CUSTOMER SERVICE AND WE WANT YOU BACK AS A SATISFIED CUSTOMER AGAIN! THERE IS NO RESERVE! Check out my! Be sure to add me to your! AUCTION DETAILS: ALL BIDS ARE FINAL! THERE IS NO RESERVE! PAYPAL ONLY! PAYMENT MUST BE RECIEVED WITHIN(3) DAYS OF AUCTIONS END OR I WILL RE-LIST THE ITEM AND TAKE ACTION THROUGH EBAY! ... morePLEASE. SERIOUS BIDDERS ONLY! I DO N OT CANCEL AUCTIONS OR BIDS! SHIPPING INSIDE THE U.S. ONLY TO CONFIRMED PAYPAL ADDRESS ONLY! NO EXCEPTIONS! NO INTERNAIONAL SHIPPING! NO EXCEPTIONS! IF ANY PROBLEMS ARISE AFTER THE END OF THE AUCTION. PLEASE CONTACT ME HERE. DIRECTLY ON EBAY, NOT VIA E-MAIL! I ALWAYS TRY TO KEEP MY CUSTOMERS HAPPY AND EARN 5 STAR POSITIVE FEEDBACK IN RETURN! I AM ALSO WILLING TO ANSWER ALL YOUR QUESTIONS BEFORE THE AUCTIONS END WITH AT LEAST(1) DAY NOTICE. GOOD LUCK!
|
|
|
WIDIA GTD 11551 110-24 NC HS TAP SET !
UP FOR AUCTION: WIDIA GTD 11551 110-24 NC HS TAP SET. GENERAL CONDITION: PRE-OWNED. WORKING CONDITION: GOOD. COSMETIC CONDITION: GOOD. BRAND NAME: WIDIA GTD. MODEL# 11551. COLOR: SILVER. ITEM SPECIFICS: CONTAINS SOME VERY LIGHT SCRATCHES. ANY DEFECTS OR OBVIOUS DAMAGE: NO DAMAGE. THIS AUCTION INCLUDES: WIDIA GTD TAP SET ONLY. EVERYTHING COMES AS SHOWN IN PHOTOS! AUCTION WINNER: WHEN YOU RECEIVE YOUR ITEM. PLEASE CONTACT US IF YOU ARE UNHAPPY WITH THE DESCRIPTION OF THE ITEM. WE HOPE TO EARN YOUR 5 STAR POSITIVE FEEDBACK THROUGH GREAT CUSTOMER SERVICE AND WE WANT YOU BACK AS A SATISFIED CUSTOMER AGAIN! THERE IS NO RESERVE! Check out my! Be sure to add me to your! AUCTION DETAILS: ALL BIDS ARE FINAL! THERE IS NO RESERVE! PAYPAL ONLY! PAYMENT MUST BE RECIEVED WITHIN(3) DAYS OF AUCTIONS END OR I WILL RE-LIST THE ITEM AND TAKE ACTION THROUGH EBAY! ... morePLEASE. SERIOUS BIDDERS ONLY! I DO N OT CANCEL AUCTIONS OR BIDS! SHIPPING INSIDE THE U.S. ONLY TO CONFIRMED PAYPAL ADDRESS ONLY! NO EXCEPTIONS! NO INTERNAIONAL SHIPPING! NO EXCEPTIONS! IF ANY PROBLEMS ARISE AFTER THE END OF THE AUCTION. PLEASE CONTACT ME HERE. DIRECTLY ON EBAY, NOT VIA E-MAIL! I ALWAYS TRY TO KEEP MY CUSTOMERS HAPPY AND EARN 5 STAR POSITIVE FEEDBACK IN RETURN! I AM ALSO WILLING TO ANSWER ALL YOUR QUESTIONS BEFORE THE AUCTIONS END WITH AT LEAST(1) DAY NOTICE. GOOD LUCK!
|
|
|
Widia / Hanita SPCL4167743, 1/2 x 1/2 x 5/8 x 2 1/2 Solid Carbide End Mill 2 ea.
You are bidding on( 2) USED Widia/ Hanita SPCL4167743. 1/2" x 1/2" x 5/8" x 2 1/2" Solid Carbide End Mill USED. P/N SPCL4167743. Size- 1/2" Shank Dia. 1/2" Flute Length- 5/8" OAL- 2 1/2" No. of Flutes- 6- Centercutting. Radius- 0.060" Material- Solid Carbide. Finish/ Coating- TiALN. Condition- USED- In Excellent Condition- SEE PHOTOs. Made in USA FREE SHIPPING in the USA only. We use Ebay Shipping Calculator to figure our shipping. We ship USPS Priority Mail unless item is listed with different shipping details. We Combine Shipping for Multiple Items. 09J Tools. Powered by
|
|
|
Kennametal Widia Widax 258-37-941 CAT-50 V-Flange Tool Holder Adapter
Up for sale here is a Kennametal Widia Widax 258-37-941 CAT-50 V-Flange Tool Holder Adapter. Used in good condition. Feel free to ask any questions. SCT2191a 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13e68723841-0xf9-
|
|
|
WIDIA ANSI Boring Bar For Internal Turning. 1 1/2" dia, 14"long A24U-MDUNR4
Radial Rake Angle: Wholesale: $411.59 Package Quantity: 1(EA) Quantity: x 1(EA) Availability: Fastenal Part No. SKU) 3351510 Manufacturer Part No. 2951412 UNSPSC: Manufacturer: Category: 10.000 Model Compatibility: A-MDUN-3[DEG] LW ANSI Catalog Number: A24UMDUNR4 Coolant Supply Size: 1/4"18 NPT Cutting Height(in) 0.00000 Cutting Height(mm) 50.800 Unit of Tool: Inch Type: Boring Bar Axial Rake Angle: 5.000 Clamping System: Top& Hole Clamp ISO Catalog Number: A24UMDUNR4 Adapter/Shank/Bore Dia(in) 1.5000 Adapter/Shank/Bore Dia(mm) 38.100 Gage Insert: DN.432 Min Bore Dia-Ax Grv Dia(in) 2.0000 Min Bore Dia-Ax Grv Dia(mm) 50.800 Tool Length(in) 14.0000 Tool Length(mm) 355.600 Product Weight: 6.705 lbs. Applications: Internal Boring Facing Notes: ANSI Boring Bar For Internal Turning This info comes from the Fastnail cataloge. The item being ... morelisted is USED. All of the technical information does apply for the listed item. Also the listed item comes with 2 new tips. This will ship USPS priority flat rate medium box. This is a NO RESERVE AUCTION. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e6aecc82e-0x105-
|
|
|
VHM - Bohrer D=6,1mm 4*D TIN Widia 640
Bohrer ist neu nachgeschliffen und neu TIN beschichtet worden. Bohrer befindet sich im sehr guten Zustand und hat keine Ausbrüche. Hochleistungsbohrer Rechnung mit ausgew. MwSt. wird der Sendung beigelegt. Foreign bidders are welcome! 19% MwSt sind im Preis enthalten. Unsere USt-ID.Nr: DE 177383372 Steuer-Nr. FA Vechta 68/126/03450 Erstellt durch Das kostenlose Einstell-Tool. Stellen Sie Ihre Artikel schnell und bequem ein und verwalten Sie Ihre aktiven Angebote. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13ee4bebb24-0xfe-
|
|
|
Widia GTD 244 Helical Mill Machine Tool Steampunk
Widia GTD 244 Helical Mill Widia GTD 244 helical mill. At least that's what I think this thing is. 4" long(6" including shaft) 2.25" diameter. Very good condition, some wear to clamp area of shaft. Might make a cool part for a steampunk project. I will ship this item within the 48 continental United States only. It usually takes me around 3 business days from receipt of payment(weekends are not business days) to ship packages. However. If you need an item quickly, please let me know in advance and I will do my best to get it out of the door as soon as I can. PayPal only. Payment is due within three days of invoice. By bidding you agree to abide by these terms. I don't ship internationally or end auctions early. Sorry. Thanks. Dave manualdave
|
|
|
VALENITE/WIDIA 2" Facemill Cutters with 34 Inserts!
Up for auction are two VALENITE/WIDIA 2" CUTTERS with 34 inserts. These are used but in very good condition. One is just like new. They work really nice on alloy steel with 0.04-0.05 depth of cut. I used these for one specific job and now there is no need for them. I spend over $1500 when I got these brand new last year. Bid with confidence as all sales are final. NO RETURNS! They take 0.750 arbor Inserts: RCMT/1606-RDHT/1605 34 inserts Included. 30 of them are brand new and 4 used but still usable. 6 CUTTING EDGES! ALL SALES ARE FINAL! 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13f857e9f4e-0xf5-
|
|
|
FIVE WIDIA AND OTHERS 3/4" HSS RADIUS ROUGHING ENDMILLS W/ 3/4" SHANKS
aims FIVE WIDIA AND OTHERS 3/4" HSS RADIUS ROUGHING ENDMILLS W/ 3/4" SHANKS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Widia and Other Manufacturers. These are 5 NEW HSS Radius Roughing Endmills. Specifications: Material: High Speed Steel. Cutting Diameters Include: 3/4" Overall Lengths: 4" to 5-1/4" Shanks: 3/4" Length of Cut Range: 1-1/2" to 3" Flutes: 4. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. FIVE WIDIA AND OTHERS 3/4" HSS RADIUS ROUGHING ENDMILLS W/ 3/4" ... moreSHANKS Reliable Tool Inc. c 2011 | Powered by
|
|
|
Schneidkopf UT40 267.52.270 9I Kennametal - WIDIA-WIDAFLEX
Artikelbeschreibung Schneidkopf Hersteller: WIDAFLEX UT40 267.52.270 9I Industrieware Lieferumfang: 1 Stück Zustand: Gebraucht. Mit Lager- Gebrauchsspuren. Bitte beachten Sie das gezeigte Bild, Sie erhalten den dort gezeigten Artikel. Auf dem Bild zu sehende Wendeschneidplatten sind kein Bestandteil der Auktion! mit Lagerspuren Der hier angebotene Artikel stammte aus einer Firmeninsolvenz- Für Fragen stehen wir Ihnen gerne per E-Mail zur Verfügung. Unsere Waren Die hier angebotenen Artikel. Stammen aus Insolvenzen oder Betriebsauflösung. Wir weißen Sie ausdrücklich darauf hin, dass wir die Artikel als Gebrauchtware verkaufen. Auch wenn es sich teilweise um Neuware handelt. Die Artikel werden unsererseits NUR einer Sichtprüfung und keiner technischen Prüfung unterzogen. Daher kann der Artikel optische. ... moreTechnische Mängel bzw. Defekte aufweisen, die nicht aufgeführt sind. Grundsätzlich handelt es sich bei den von uns angebotenen Artikeln. Um Industrieware-qualitativ Hochwertiger- als z.B. aus den gängigen Baumärkten! Wir unterscheiden die Qualität-Zustand der Ware in 3 Kategorien: Neuware= unbenutzt evtl. mit OVP neuwertig= sehr gut erhalten mind.90% gebrauchte Ware= alles unter 90% Bitte beachten Sie hierbei. Dass Lagerspuren wie z.B. leichter Flugrost oder auch Beschriftungen für uns keine Qualitätsminderung darstellen! Der Artikel wird nach bestem Wissen und Gewissen unter Ausschluss der Gewährleistung angeboten bzw. verkauft. Bezahlung& Versand Zahlungsmöglicheiten: PayPal Überweisung Barzahlung bei Übergabe s. Artikelbeschreibung Versand: Versand innerhalb Deutschlands Versand innerhalb EU auf Anfrage Versand Weltweit auf Anfrage Für Großposten bzw. sperrige Artikel ist eine Vermittlung an unsere Partner-Spedition möglich Versand erfolgt ausschließlich per DHL. Zu Ihrer Sicherheit und Nachverfolgung. Bis 1kg/versichert: 3.60 Euro Versandkosten in der BRD 1kg bis 3kg/versichert: 4.50 Euro V
|
|
|
Kennametal Widia 1.500" Indexable Face Mill Cutter (WEM6401500HP06W4)
Kennametal Widia Indexable Face Mill Cutter(WEM6401500HP06W4) Nominal Diameter: 1.500" Maximum Diameter: 1.752" Shank Diameter: 1.250" Overall Length: 4.000" Number of Flutes: 4 Direction: Right Hand Maximum RPM: 12.000 Coolant Fed: Yes Compatible Insert: HP.T06T3. This item is in good condition and comes as shown. Will ship out one day after receipt of payment.
|
|
|
WIDIA HANITA SOLID ENDMILLS & HOLEMAKING BOOK
aims WIDIA HANITA SOLID ENDMILLS& HOLEMAKING BOOK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Solid Endmill& HoleMaking Book in Good condition. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. WIDIA HANITA SOLID ENDMILLS& HOLEMAKING BOOK Reliable Tool Inc. c 2011 | Powered by
|
|
|
WIDIA CIRCLE MICRO COOLANT FED INDEXABLE BORING BAR MODEL CCB125045R 1/4" SHANK
Widia Circle Super Precision Micro Coolant Fed Indexable Boring Bar Model CCB125045R 1/4" Shank x 4" Overall Length Coolant Fed Good Condition! No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- ... moredo NOT pay eBay auction end notice. I f you pay immediately following auction end- we will ship. Payment MUST be received within 5 business days of earliest auction end. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. We do not issue partial refunds. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-143a42099a1-0xfb-
|
|
|
WIDIA Circle Steel Shank Boring Bar QSBIW37553R
3/8 Steel Shank. I bought this here on e-bay a couple years ago as a used once item and then I never used it. Comes with 3 inserts and wrench.
|
|
|
Widia / Hanita 4FL4V05S, 1 1/4" x 1 1/4" x 2 1/4" x 5", TiALN End Mill Regrind
You are bidding on( 1) Regrind- Widia/ Hanita 4FL4V05S. 1 1/4" x 1 1/4" x 2 1/4" x 5" TiALN End Mill Regrind. P/N 4FL4V05S. Size- 1 1/4" 1.2500" Shank Dia. 1 1/4" Flute Length- 2 1/4" OAL- 5" No. of Flutes- 4- Centercutting. Material- Solid Carbide. Finish/ Coating- TiALN. Regrind& Recoated FREE SHIPPING in the USA only. We use Ebay Shipping Calculator to figure our shipping. We ship USPS Priority Mail unless item is listed with different shipping details. We Combine Shipping for Multiple Items. Powered by SixBit's eCommerce Solution
|
|
|
PUNTA LEGNO WIDIA DIA 22 SV x 58 DX DSCN2066
PUNTA LEGNO WIDIA DIA 22 SV x 58 DX.
|
|
|
PUNTA LEGNO WIDIA LANCIA DIA 12 DIA 22 DIA 24 x 67 DX DSCN2114
PUNTA LEGNO WIDIA LANCIA DIA 12 DIA 22 DIA 24 x 67 DX.
|
|
|
PUNTA LEGNO WIDIA DIA 18 SV DIA 20,5 x 59 DX DSCN2065
PUNTA LEGNO WIDIA DIA 18 SV DIA 20.5 x 59 DX. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14473619dee-0x11a-
|
|
|
PUNTA LEGNO WIDIA LANCIA DIA 14 DIA 18 x 61 DX DSCN2064
PUNTA LEGNO WIDIA LANCIA DIA 14 DIA 18 x 61 DX.
|
|
|
PUNTA LEGNO WIDIA LANCIA DIA 17,3x73 DX DSCN2063
PUNTA LEGNO WIDIA LANCIA DIA 17.3x73 DX.
|
|
|
PUNTA LEGNO WIDIA DIA 10x57 SX DSCN2058
PUNTA LEGNO WIDIA DIA 10x57 SX.
|
|
|
PUNTA LEGNO WIDIA DIA 10x60 SX DSCN2057
PUNTA LEGNO WIDIA DIA 10x60 SX.
|
|
|
PUNTA LEGNO WIDIA DIA 10x70 SX DSCN2056
PUNTA LEGNO WIDIA DIA 10x70 SX.
|
|
|
PUNTA LEGNO WIDIA DIA 10,5x60 DX DSCN2108
PUNTA LEGNO WIDIA DIA 10.5x60 DX.
|
|
|
PUNTA LEGNO WIDIA DIA 10,5x57 DX DSCN2107
PUNTA LEGNO WIDIA DIA 10.5x57 DX. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14475434be7-0xff-
|
|
|
PUNTA LEGNO WIDIA DIA 10,3x57 DX DSCN2106
PUNTA LEGNO WIDIA DIA 10.3x57 DX.
|
|
|
PUNTA LEGNO WIDIA DIA 10x57 DX DSCN2102
PUNTA LEGNO WIDIA DIA 10x57 DX.
|
|
|
PUNTA LEGNO WIDIA DIA 8x51 SX DSCN2098
PUNTA LEGNO WIDIA DIA 8x51 SX.
|
|
|
PUNTA LEGNO WIDIA DIA 10x61 SX DSCN2097
PUNTA LEGNO WIDIA DIA 10x61 SX.
|
|
|
PUNTA LEGNO WIDIA DIA 10x74 SX DSCN2096
PUNTA LEGNO WIDIA DIA 10x74 SX.
|
|
|
PUNTA LEGNO WIDIA DIA 8x73 SX DSCN2095
PUNTA LEGNO WIDIA DIA 8x73 SX.
|
|
|
PUNTA LEGNO WIDIA LANCIA DIA 10x68 SX DSCN2094
PUNTA LEGNO WIDIA LANCIA DIA 10x68 SX.
|
|
|
PUNTA LEGNO WIDIA DIA 8,5 DIA 18,3 DX DSCN2113
PUNTA LEGNO WIDIA DIA 8.5 DIA 18,3 DX.
|
|
|
PUNTA LEGNO WIDIA DIA 8,5 DIA 19,3 DX DSCN2112
PUNTA LEGNO WIDIA DIA 8.5 DIA 19,3 DX.
|
|
|
Drehhalter MCLNR-25x25M16 NK1 von Widia C1622
Drehhalter MCLNR-25x25M16 NK1 von Widia 25 x 25 mm Gesamtlänge 150 mm rechte Ausführung gebraucht Die Lieferung erfolgt inkl. Rechnung mit ausgewiesener MwSt. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-144b0edba4a-0x106-
|
|
|
WIDIA INDEXABLE THREADING TOOL HOLDER MODEL LSASR-163 W/ INSERTS
Widia Indexable Threading Tool Holder Model LSASR-163 1" Shank x 6" Overall Length Includes Arno Solid Carbide Unused Inserts Model 16ER-V-PG16 AK20 From Manufacturer's Website: ANSI Code: LSASR163 Axial Rake Angle: 10[DEG] Clamping System: Dual Clamping Cutting Height(in) 1.00000 Gage Insert: LT16ER Head Length(in) 1.2000 Head Length(mm) 30.480 ISO Code: LSASR163 Radial Rake Angle: 1.5[DEG] Shank Height(in) 1.0000 Shank Height(mm) 25.400 Shank Width(in) 1.0000 Shank Width(mm) 25.400 Style: External Tool Length(in) 6.0000 Tool Length(mm) 152.400 Type: Threading Tool Holder Unit of Tool: Inch Product Weight: 1.6653 lbs. Applications: External Threading Notes: ANSI Tool Holder For External Threading Dual clamping system, Center clamping and/ or top clamp, Reliable TopClamp locking and/ or screw locking for unhindered chip flow ... moreguarantees precise insert positioning accuracy, No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the co
|
|
|
Stock Barrette, utensili tornio, punte. tutto materiale in WIDIA Metallo duro HM
Stock composto da barrette. Utensili e punte.Tutto il materiale mostrato nelle foto è composto interamente in WIDIA. Il materiale che viene venduto e quello mostrato nella foto dell inserzione. Di preciso non so descrivere questi articoli. Dato che non ho conoscenze sufficienti, l'unica cosa che so e che questo materiale proviene da uno stock fallimentare. Di una azienda specializzata nel settore della tornitura e fresatura. Per quanto riguarda lo stato degli oggetti. Io li definisco come usati. Osservando gli oggetti sono riuscito a identificare le misure delle punte piu grandi che sono: N° 2 punte da 20 mm. N° 1 punta da 18 mm. N° 1 punta da 12 mm. N° 1 punta da 10.5 mm. Base d'asta 1€ non fatevi scappare quest'occasione. Questo è l'unico materiale in Widia che ho disponibile nello stock. Quindi ... moresara in vendita solo per questa volta. Vi consiglio di visitare anche gli altri oggetti che ho messo in vendita. Buon asta a tutti.
|
|
|
206-169 Cutoff Toolholder Separator USED Widia-Manchestrer 1 pc
You are bidding on: 1 pc 206-169 Cutoff Toolholder Separator USED Widia-Manchestrer T ake a look! We have Carbide Inserts. Drills, End Mills, Reamers with new stuff all the time, Check Back Often or Contact us at shopsupplies@hotmail.com Thanks For Looking! Payment We currently accept PayPal.We can also make arrangements if PayPal is not an option. Please contact us to do so. Shipping If you are buying more than 1 item we will combine the shipping charges. We recommend insurance for our international customers shipping USPS priority mail. Please note that when shipping USPS international flat rate packages they are not trackable in any way after they are shipped. Returns If You are unsatisfied for any reason please contact us to resolve the issue or arrange a return of your item. We want you to be 100% satisfied. If you are satisfied with ... moreyour purchase please leave 5 STAR* Feedback! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
widia 170 transport
Up for sale is the Wadia 170 iTransport. Amazing performance for so little money. So. Good that it can replace transports costing big bucks. Its performance can be improved further with the CI Audio power supply. Item is in great condition and I never have had any problems. Selling to conus only.
|
|
|
1Pc. WIDIA VHM Drill D=17,5 mm Spiral Drill
The description of this item has been automatically translated. If you have any questions. Please feel free to contact us. 1STK WIDIA VHM TWIST DRILLS. D = 17.5 MM CUT LENGTH = ABOUT 60 mm TOTAL LENGTH = APPROX 115 mm nachgeschliefen and coated. In several articles. We only charge shipping costs once. Look at my other items! The bearings are still many different We ndeplatten. Vhm cutters, twist drills Vhm available email me if interested. CLICK ON THE SOLID CARBIDE MILLING CUTTERS THEY WANT increase CLICK ON THE SOLID CARBIDE MILLING CUTTERS THEY WANT increase CLICK ON THE SOLID CARBIDE MILLING CUTTERS THEY WANT increase CLICK ON THE SOLID CARBIDE MILLING CUTTERS THEY WANT increase CLICK ON THE SOLID CARBIDE MILLING CUTTERS THEY WANT Zoom increase 20. 3,201 3, Tool Type, Spiral Drill, Material, For Metalworking, Cutting Material, Vhm Hard ... moreMetal,
|
|
|
Gebogene Hartmetall-Drehmeißel links 20X20 WIDIA
Für den preisbewussten Käufer der heutigen Zeit Hallo, hier bieten sie auf ein gebrauchte. Gebogene Hartmetall-Drehmeißel links 20X20 WIDIA GBX2KI404A3033 1X Gebogene Hartmetall-Drehmeißel links 20X20 WIDIA TH10 DIN 4972 ISO mit quadratischem Schaft Zustand gebraucht siehe Bilder Versandkosten innerhalb Deutschlands Kostenlos. WORLDWIDE SHIPPING Versand Deutschland Standard 4.10 EUR(Optional: Abholung 0,00 EUR) Zahlung Akzeptierte Zahlungsmethoden: Vorkasse(Überweisung) Barzahlung, PayPal. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-146ae71f733-0x10d-
|
|
|
7H2SS 0.9610" Drill Dia WIDIA Metcut Straight Shank Spade Blade Holder 1-1/4" SH
WIDIA Metcut Straight Shank Spade Blade Holder. 1-1/4" SHANK. 7H2SS. 0.9610" Drill Dia ANSI Code: 7H2SS Adapter/Shank/Bore Dia(in) 1.2500 Adapter/Shank/Bore Dia(mm) 31.750 Coolant Supply Size: 1/4"18 NPT Drill Diameter Max(in) 1.3800 Drill Diameter Max(mm) 35.052 Drill Diameter Min(in) 0.9610 Drill Diameter Min(mm) 24.409 Flute Type: Helical Gage Length(in) 5.5600 Gage Length(mm) 141.224 Hand of Tool: Right ISO Code: 7H2SS Max Drill Depth(in) 3.5600 Max Drill Depth(mm) 90.424 Overall Length(in) 8.0000 Overall Length(mm) 203.200 Seat Size/ Series: 2 Shank Length(in) 2.4370 Shank Length(mm) 61.900 Shank Type: Straight Type: Spade Blade Holder Unit of Tool: Inch Product Weight: 2.063 lbs. Applications: Helical fluted drills assist chip removal in vertical machining applications by helping the chip"climb" out of the hole ... moreHelical flutes also assist in curling and breaking chips Straight shank used for general tool holding in turrets. End mill adapters, collet chucks, etc. Through-the-spindle coolant is preferable for optimum drilling with spade blades Flood coolant not recommended except for very short holes at 1XD or less Through coolant must be used for depths greater than 1XD If through-the-spindle coolant is not available. Then coolant glands or inducers should be used to provide through coolant capability All WIDIA-Metcut spade blade holders are manufactured with both the option of through coolant or with a rotary coolant gland Notes: Replace blade Torx screws on a regular basis to assure proper performance. Spade blade holders generally can accommodate a range of blade sizes up to 1.30 to 1.35 times the smallest blade size. It is therefore possible to cover the entire range of holes sizes with just a few spade drill holders. Contrast this with the inventories required for indexable drills and taper shank steel drills. Please See All Photos if you have any questions or would like any extra photos please contact me the items shown in the photos is the items you will receive I go to
|
|
|
LOT OF 11 TAPS WIDIA GTD NORTH NORTH ATTLEBORO KENNAMETAL
Up for sale a LOT OF 11 TAPS WIDIA GTD NORTH NORTH ATTLEBORO KENNAMETAL 7/16-20 NF G HS 3/8-16 NC HS GH 3 302A 5/16-18 NC HS H H1 1/4-20NC HSS-E G H5 5/16-18 NC HSS-E G H5 1/4-28 NF HS 1/8-27 NPT180 PROOJ AND MORE Please see photos for more details and condition. THANK YOU Please send an e-mail with any questions. Payment must be made with pay pal or other methods. RETURN POLICY: We offer a 100% satisfaction guarantee. If you are unhappy with your purchase you can return within 30 days for a full refund, Thanks for viewing and have a great day- Check out my! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-146b48cd423-0x10d-
|
|
|
Widia 2" HD mini face mill
The face mill comes with the inserts in the face mill itself. One side of the inserts are used. The other sides have never been used. Comes with extra screws and screw driver to change inserts. In almost brand new condition, just switched to a different brand of cutter. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-146b48e9ffc-0x110-
|
|
|
Widia 1" Tool Holder MSKNR-16-4 D Boring Bar 9T6 Made In USA
Preowned tool holder by Widia• MSKNR-16-4 D• right hand style K. 15 degree end cutting edge angle for negative square SNM inserts• couple spots of surface rust on the back side- see photos• includes case(Loc:A300)
|
|
|
Widia 1.225.04.544.00 A=4; 3225; R
Used. Minimal use. Like new.
|
|
|
WIDIA HANITA 16 X 16 X32 X 92 END MILL 4 FLUTES / MILLING CUTTER 477716006LT
WIDIA HANITA 477716006LT TIALN SC FIN 4FL 16 X 16 X 32 X92 1920438 SELLING AS USED ALTHOUGH NO SIGNS OF USE! PLEASE SEE ALL THE PICTURES. DELIVERY PRICE QUOTED TO MAINLAND UK ONLY. PLEASE ASK FOR OTHER AREAS. YOU ARE LOOKING AT A OLIVER 4 HEAD SINGLE ENYOU AR THANK YOU FOR TAKING A LOOK PLEASE HAVE A LOOK AT MY OTHER ITEMS Any questions please ask 07926 048237
|
|
|
JOB LOT IZAR / CARBMAX / WIDIA 10MM END MILLS / ROUGHING CUTTERS / CHIP BREAKERS
10MM VHM STG 31.42 CARBMAX 2 FLUTE 10MM END MILL 3 FLUTES 8MM END MILL 3 FLUTES 8 X 10 X 19 X 69 10MM END MILL WITH RADIUS HSSC03 STG 56.00 CARBMAX 8MM 3 FLUTES 10MM HSSC03 STG 56.00 3 FLUTES 10MM CARBIDE WITH RADIUS TITEX PLUS D3245TCN/ FA30/ 45MM e8 HSS-E C08 10MM HSSC08 STG 56.00 10MM IZAR 4439 N HSS-EC08/ STG. 54.4 10MM NU-CUT HSSC08 ROUGHING CUTTERS 10MM IZAR 6644 NRF PMX STG54.4 8MM 3 FLUTES 10MM X 22 12.8518 3710 SP.56NC HSS.C08 4 FLUTES 8MM DIAMETER HSSC08 STG 43.53 WIDIA 8MM DIAMETER HSSC08 STG 43.53 16 ENDMILLS DETAILS AS ABOVE GOOD USED CONDITION PLEASE SEE ALL THE PICTURES. DELIVERY PRICE QUOTED TO MAINLAND UK ONLY. PLEASE ASK FOR OTHER AREAS. YOU ARE LOOKING AT A OLIVER 4 HEAD SINGLE ENYOU AR THANK YOU FOR TAKING A LOOK PLEASE HAVE A LOOK AT MY OTHER ITEMS Any questions please ask 07926 048237
|
|
|
WIDIA Milling Insert, M1200MINI Series, HNGJ0704ANENLD, Grade TN5515
10 inserts per package. WIDIA. TN5515
|
|
|
Widia 5088022 6FL Refurbished 12.019mm Coolant Carbide Reamer 19mm SD 94mm LOC
Widia 5088022 6FL Refurbished 12.019mm Coolant Carbide Reamer 19mm SD 94mm LOC Left Side: Right Side, Manufacturer: Widia Model: 5088022 Description: 6 Flute Refurbished 12.019mm Coolant Carbide Reamer 150mm OAL 19mm SD 94mm LOC Packaging Condition Details: Slightly Distressed Reamer Cutting Diameter: 12.019mm Shank Diameter: 19mm Length of Cut: 94mm Overall Length: 150mm Flutes: 6 Material: Carbide(measurements are hand measured) Includes: Widia 5088022 6FL Refurbished 12.019mm Coolant Carbide Reamer 19mm SD 94mm LOC Item Condition: Manufacturer refurbished Packaging Condition: Slightly Distressed We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. We do not accept international credit ... morecards. To make a direct payment via credit card, please contact us directly by phone. All Utah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Orders with a value of $250 or more will require an adult signature at delivery. No exceptions. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order. Each
|
|
|
Good Condition Widia GTD 13328-1/2 13NC H3 Gun Tap Inv #2437
Payment is expected within 4 days of auction close. If this is a problem. Please just email me) To our California Customers: Please be advised that sales tax will be added to your order(9% Thanks for shopping with AJ's Super Pawn:o) Domestic items usually ship within 48 business hours of a cleared payment. Mon-Fri. UPS tracking and insurance is included. Express shipping available. PO Box Addresses will ship via USPS Priority Mail. Please note your shipping price may be higher. International Buyers: Our shipping rates include delivery fees only. Applicable duties and taxes levied by your local government ARE NOT included and will be payable by you as the importer of merchandise. Sorry. We cannot mark any items as"Gift" or lower the value on customs documents. Good Condition Widia GTD 13328-1/2 13NC H3 Gun Tap Inv#2437 Click ... moreto Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Brand name: Widia Model: GTD 13328 Product type: Gun Tap Serial number: 2750* Inventory number: 2437 Condition: Good in original box! For your consideration, The Widia GTD Gun Tap! Item is used. But in good condition! Comes in the original packaging. Questions? Comments? Concerns? JUST ASK! Actual item pictured for your review: Please see photos for condition* UPS GROUND Time in Transit: QUALITY GUARANTEE: We inspect and test all items that come into our shop. However. We deal with a large variety of items and our knowledge of some items is quite limited. Because of this we offer a 48 hour inspection period on all items that we sell. If you happen to find a problem with your item that we missed, please let us know within 48 hours of delivery. We will repair the item or refund your money if there is a problem that we cannot fix. Good customer service is our only goal. Please let us know immediately if there is a problem with your item. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check w
|
|
|
WIDIA FACEMILL M100 239.10.214 80MM (LOC1000)
SAVE BIG MONEY! I ship 6 days a week. I offer money back guarantees. I will always combine shipping. I also have large quantities of lathe tool holders. Boring bars, and face mills. Please email if interested. INTERNATIONAL SHIPPING PRICE VARIES FOR ANY QUESTIONS PLEASE CALL JASON PUURI AT 517-420-5401 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Torx Wrench Set (German made, WIDIA) (VE-A)
WING TORX 7 set w/metal stand. Almost brand new: T-6. T-7, T-8, T-9, T-10, T-15, T-20
|
|
|
Widia 5088022 12mm - 20mm Carbide Step Reamer 95mm LOC 150mm OAL 6FL
Widia 5088022 12mm- 20mm Carbide Step Reamer 95mm LOC 150mm OAL 6FL Left Side: Right Side, Packaging Indicates Remanufacturing Manufacturer: Widia Model: 5088022 Description: 12mm- 20mm Carbide Step Reamer 95mm LOC 150mm OAL 6FL Packaging Condition Details: Open Packaging Cutting Diameter: 12mm. 16mm, 20mm Shank Diameter: 20mm Length Of Cut: 95mm Overall Length: 150mm Flutes: 6 Material: Solid Carbide Type: Step Reamer*Stock Image* The picture below is a stock photo. The packaging for the item you will receive may vary slightly but the item is the same model and in the same condition as described. Includes: Reamer Item Condition: Manufacturer refurbished Packaging Condition: Open Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: ... moreWe accept Visa. MasterCard, Discover and American Express. We do not accept international credit cards. To make a direct payment via credit card, please contact us directly by phone. All Utah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Orders with a value of $250 or more will require an adult signature at delivery. No exceptions. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or ph
|
|
|
One Lot of over 140 New Carbide Inserts Valenite and WIDIA
One Lot of over 140 New Carbide Inserts Valenite and WIDIA.
|
|
|
WIDIA GTD 16235 TAP TAPERED 1 1/2" -11 1/2NPTF 5F PIPE
Used once.
|
|
|
GERMANY! WIDIA WIDAX-HEINLEIN MODEL 229.25.710 INDEXABLE END MILL 1-1/4" SHANK
Widia Widax-Heinlein Indexable End Mill Model 229.25.710 1-1/4" Diameter Shank ~1-1/2" Cut Diameter No Reserve! Check my other auctions for mor e quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you ... morepay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
3/8" WIDIA CIRCLE QSBIW-375-5-3R STEEL BORING BAR Through Coolant 5" OA inserts
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE In this auction is offered GTD WIDIA CIRCLE QSBIW-375-5-3R STEEL BORING BAR 3/8" shank diameter 5" OA. Through Coolant. Boring bar comes with lot of 7 new inserts. It takes insert WP.2151, insert screw QTM20. Boring bar was used and has some wear marks. See pictures for better detail. Thanks for stopping by. Normal 0 false false false EN-US X-NONE X-NONE- Normal 0 false ... morefalse false EN-US X-NONE X-NONE SHIPPING: All items are shipped via USPS. Priority mail comes with tracking information to check on the delivery status of your mailing. We ship next or not more than 2 business days after payment is cleared. International Shipping Policies Addendum: If not quoted at the end of auction. Bidder is to email me for exact shipping fee. Items will be shipped via USPS Priority Air Mail(this is the only service which comes with tracking information to follow the package) or economy priority flat rate and First class air mail(up to 4 pounds) All international sales are final, and no refunds, items sold as is. We will not be responsible for any international customs clearance. Duties, and taxes. Some countries are notoriously know for their slow or unreliable shipping service(Russia. Italy) We prefer to ship only registered priority to these countries so contact prior bidding is required. If you have any questions contact us. PAYMENT: Payment is to be received within three(3) days of the auction end. Winning bidde
|
|
|
Widia Carbide indexable milling cutter & 50 cat arbor with inserts
This auction includes everything in the picture. Widia 4"Cutter head 50 cat taper valenite arbor and 5 new inserts. Both arbor and cutter head part numbers can be seen in the photos. All insert pockets are good. Widia is one of the best tooling companies in the world. Buy this complete setup for less than the cost of the arbor. Please allow 4 business days for handling. Thanks
|
|
|
WIDIA 12396461 KENNAMETAL INDEXABLE ENDMILL 5/8 SHANK
WIDIA 12396461 KENNAMETAL INDEXABLE ENDMILL 5/8 SHANK THIS APPEARS TO BE IN GOOD USEABLE CONDITION. THE INSERTS ARE SHOT. BUT THERE IS GOOD SUPPORT TO THE INSERTS EVEN THOUGH IT DOES HAVE SOME WEAR. Payment Please plan on paying with 24 hours of auction end. If there are any problems. Please contact me. Questions If you have any questions. Do not hesitate to ask. Shipping/ Combined Shipping Please wait for the invoice having combined shipping on it. Otherwise I cannot refund overpayment. If you do not receive an invoice. Kindly remind me. Sometimes I take a couple extra days to get an item out the door. If you are concerned. Please ask. If you need an item immediately. Please contact me as well. I try to accomodate my buyers! I combine shipping. So check out my. Powered by SixBit's eCommerce Solution
|
|
|
9x Rubi Widia Scoring/Cutting Wheels 6, 10, 12, 13,22,30mm For Rubi Tile Cutters
Job Lot 9x Rubi Tools Widia Scoring/Cutting Wheels 6mm(1/4" 10mm(3/8" 12mm, 13mm, 22mm, 30mm For Rubi Tile Cutters Some new(packaging is a bit dusty) and some only very little used- please see pictures
|
|
|
Widia / Metcut 5105068, 0.7078" (17.9mm) TiALN Solid Carbide Step Reamer Regrind
You are bidding on( 1) Widia/ Metcut 5105068. 0.7078" 17.9mm) TiALN Solid Carbide Step Reamer Regrind. P/N 5105068. Size- 0.7078" 17.978mm Length of Cut- 8 1/4" OAL- 10 5/8" No. of Flutes- 7 Coolant Fed Material- Solid Carbide Finish/ Coating- TiALN Condition- Regrind- SEE PHOTOs Made in USA. FREE SHIPPING in the USA only. We use Ebay Shipping Calculator to figure our shipping. We ship USPS Priority Mail unless item is listed with different shipping details. We Combine Shipping for Multiple Items. 15-R-61 Powered by SixBit's eCommerce Solution.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14a50bff58f-0x114-
|
|
|
WIDIA 3/4-14 HS NPT 5F SEMI INTERUPTED TAP STK1455
WIDIA 3/4-14 HS NPT 5F SEMI INTERUPTED TAP STK1455 Customer service is very important to our business. We continually strive to improve our services in order to meet our customers’ expectations. Combined shipping is provided whenever possible to help save our customers money for multiple item purchases. If you are concerned you purchased the wrong item? If you would like to know where you package is in transit? If you have an issue with an item you received? BEFORE opening an Ebay case PLEASE contact us directly to resolve any concerns or issues you may have. Our business hours are Monday- Friday 8:00am thru 5:00pm and you can reach us at 256-395-0077.
|
|
|
FRESA 20 MM MARCA WIDIA DE METAL DURO INTEGRAL EN BUEN ESTADO
ACUMULA MAS ARTICULOS Y PAGA SOLO UN ENVIO TARIFAS SEGUN CORREOS TODOS LOS ARTICULOS SE ENVIAN POR CORREO CERTIFICADO CUALQUIER DUDA PREGUNTE ANTES DE PUJAR SI EN 7 DIAS NO SE A RECIBIDO EL PAGO SE ABRIRA UNA RECLAMACION EN EBAY SE PUEDEN RECOJER LOS ARTICULOS EN MANO Y AHORRAR EN LOS GASTOS DE ENVIO COMPRANDO MAS DE 150 EUROS EN ENVIO ES GRATUITO
|
|
|
Widia 112940406 1/2" 4V05S End Mill 1/2" SD 1" LOC 3" OAL 4FL
Widia 112940406 1/2" 4V05S End Mill 1/2" SD 1" LOC 3" OAL 4FL Left Side: Right Side, Packaging Indicates Reconditioning Manufacturer: Widia Model: 112940406 Description: 1/2" 4V05S End Mill 1/2" SD 1" LOC 3" OAL 4FL Packaging Condition Details: Open Packaging Cutting Diameter: 1/2" Shank Diameter: 1/2" Length Of Cut: 1" Overall Length: 3" Flutes: 4 Material: 4V05S Type: Square End Includes: End Mill Item Condition: Manufacturer refurbished Packaging Condition: Open Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. We do not accept international credit cards. To make a direct payment via credit card, please contact ... moreus directly by phone. All Utah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Orders with a value of $250 or more will require an adult signature at delivery. No exceptions. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order. Each item without an asterisk( in the title will cost an additional $2 to ship. He
|
|
|
9 WIDIA SQUARE INSERTS SNMT433ur GRADE TK15
9 WIDIA SQUARE INSERTS SNMT433 GRADE TK15 WITH SLIGHT WEAR
|
|
|
Widia Precision Boring Head RFX320FBH038050
Widia Precision Boring Head RFX320FBH038050 ROTAFLEX™• Precision Fine Boring Heads(FBH) with Insert Holders. 0004" 0.01mm) diameter adjustment. Basic body shipped without boring bars. PLEASE CONTACT US BEFORE LEAVING NEGATIVE/ NEUTRAL FEEDBACK. WE WILL WORK WITH YOU TO MAKE THINGS RIGHT AND ANY ITEM MAY BE RETURNED FOR A FULL REFUND. PAYMENT: Major credit cards accepted via paypal or by calling store. Store hours Mon-Wed 9:30AM to 4PM. Thurs and Fri 9:30AM to 5:00 PM. Sat 10AM to 2PM(412)221-7333. PLEASE NOTE: Item may also be for sale in store and occasionally sell over the weekend. In this case we will refund any payments made for said item and leave buyer positive feedback. Local pickup is always welcome and shipping fee negated
|
|
|
WIDIA CIRCLE FCBI20350015R CARBIDE BORING BAR
Selling WIDIA CIRCLE FCBI20350015R CARBIDE BORING BAR Front of bar is.195 dia x 1.0" long CARBIDE MIN BORE DIA THAT CAN CUT =.250 Body is 1/2" STEEL Overall length of bar is 2-1/2" BAR IS COOLANT THRU.IT IS CURRENTLY PLUGED WITH BRASS CHIPS I strive on shipping the following day you make the payment. I only sell items that are in perfect working condition(No Junk Here) If for any reason you are not satisfied with your purchase just let me know and your Money Back GUARANTEE. You pay for return shipping cost item unused state. I can offer you a small discount.
|
|
|
WIDIA M370 INDEXABLE 1" END MILL WITH CARBIDE INSERTS - M370D100Z02C100W008L600
Up for sale is a Widia M370D100Z02C100W008L600 2 flute end mill with a box of carbide inserts& TX#8 wrench. I milled a flat down the shank. 1.00" cutting diameter& 1.00" shank 6" overall length Coolant holes for thru-spindle coolant Come with six W0EJ080412SRMM TN7535 triangular carbide inserts for cutting steel. Inserts are double-sided so there are 6 cutting edges per insert. Made in USA NOTE: Ships within the USA only. No international orders accepted.
|
|
|
WIDIA GUN HSS TAPPING 9/16" x 18 TPI NF H3 SPIRAL POINT TAP
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! NEED A SPECIFIC ITEM& YOU CAN'T FIND IT ANYWHERE. WE HAVE IT! CALL US@ 909.544.8882 ASK FOR BRANDON! The Item You Are Bidding On Is a Tap. Features: ALL ITEMS FEATURE A NO HASSLE RETURN POLICY. PLEASE READ FULL DESCRIPTION FOR ALL ITEM DETAILS! Item Specifications: Manufacturer: Interstate. Type of Tap: GUN. Size: 9/16"18 Overall Length: 3-1/2" Item Comes Exactly as Shown in Pictures. If You Want To Arrange Shipping Please Contact Us For A Quote. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted.
|
|
|
WIDIA 2" INDEXABLE FACE MILL, M1200HF200Z04S075HN09, WITH CARBIDE INSERTS
Up for sale is a used Widia 2" indexable face mill. Mfg P/N M1200HF200Z04S075HN09. 4 flutes Accepts 3/4" arbor Coolant holes for thru-spindle coolant Comes with 10 double-sided carbide inserts(4 partially used& 6 extras) P/N HNGJ090543ANSNHD TN6540. There are 12 cutting edges per insert. Made in the USA. NOTE: Ship free within the USA. No international order accepted.
|
|