Bit By Irwin Ind Tools Mini Lathe Bits Sherline Micro 100 Boring Bar 5 Used Solid Carbide Boring Bars Mo-Max Cobalt Carbide Tipped Lathe 3 Used Solid Carbide Boring Bars Machinist Gunsmith South Bend Carbide Tipped Tool Bits Machinist Lathe Cut Brazed Carbide Cleveland Mo-Max Hss Lathe Tool Bits Cobalt Alloy Cobalt Tool Bits Lathe Tools Bits Machinist Gunsmith Metal Lathe Tool Bits Carbide Tip Lathe Lathe Cutting Bits Tool Bits 1 4 4 Used Solid Carbide Boring Bars Metal Lathe Bits Mo Max Lathe Bits Sherline Taig Machinist Gunsmith Cobalt Tools Bits Sherline Taig Bit Machinist Gunsmith 6 Used Solid Carbide Boring Bars Solid Carbide Boring Bars Carbide Burr Mini Lathe Bits Sherline Taig Machinist Mo-Max Rex Carbide Lathe Tool Bits Rotabroach Annular Cutter Hss Lathe Bits Boring Bars Lathe Tools Bit 1 Hss Tool Bits Carbide Burrs South Bend Atlas Machinist Gunsmith Lathe Cutting Tools Bars 3 8 Precision Solid Carbide Cobalt Hss Bits Assortment Micro 100 Style Hougen Rotabroach Speed Steel Lathe Mill Bits Annular Cutter 3 8 Mini Lathe Long Carbide Burr Rex 95 Boring Bars Bits Lathe Tools Bits Carbide Lathe Bits Tools Bits 5 Bits Machinist Gunsmith Rex Aaa Tools Bits 3 8 Bits 5 16 Hss Countersinks Rotabroach 8 Carbide Tip Tools Bit 3 Bits High Speed Cobalt Lathe Carbide Retaining Ring Tools Bits 1 Boring Bits Cutter Bits Carboloy Carbide Lathe Cutters Kennametal Carbide Tip Lathe Bits Sherline Unimat Machinist Gunsmith Retaining Ring Boring Bars Hougen Tools Bits Machinist Cobalt Carbide Mini Lathe Tools Bits Lathe Tools Bits 3 8 3 8 Mini Lathe Bits Mini Lathe Bits Sherline Unimat Machinist Tools Bits 1 4 Micro 100 Lathe Cut Tools Hss Tools Bits Bits 5 8 Carbide Tool Bits Metal Lathe Tools Tools Bits 1 2 Hss Lathe Lathe Hss Machinist Gunsmith Tools 1 4 Mini Lathe Bits Sherline Cobalt Alloy 1 Lathe Cut Square Tool Bits Hss Lathe Cut Carbide Rotary 4 Carbide Tip Mill Tools Bits Vr Wesson Cobalt Alloy 3 Carbide Lathe Tool Lathe Cutting 5 16 Mini Lathe Bits Sherline Hss Lathe Tools Bits Grooving Tool Carbide Tip Hss Super Mo-Max Boring Bars Cutter Bit Bits Sherline Taig Machinist Gunsmith Tools Burr 1 Bits 3 4 Boring Tools Carbide Burr Set 7 Used Solid Carbide Boring Bars Rex Aa Countersinks 3 Mini Lathe Carbide Tip Tools Bits Carbide Bits Steel Lathe 2 Used Solid Carbide Center Drill Carbide Set 20 Cobalt 1 2 Lathe Tools Bits Machinist Mini Retaining Ring Boring Bars Lathe Tool Bits Lathe Tool Bits Lot Lathe Tools Bit Purpose High-Speed Steel Jobbers' Drill Bits 5 16 Carbide Lathe Carbide Tip Lathe Tools Bits Hss Square Carbide Tipped Lathe Tools 10 Carbide Tip Cut Off Tools Cut Tools Mill Machine Bits Grooving Tools Fly Cutter Rotary Burr Lathe Tooling Lot Carbide Bur Hole Cutter 5 16 Shank Radius Cutter Tools Bits 5 8 Drill Countersinks Carbide Cutter Cutoff Blade Threading Tool Tools Post Annular Cutter Bits Tools Bits Shank Square Shank Magnetic Drill Deburring Tools Shaper Bits Cnc Router Bits Machinist Tools Lathe Milling 2 Lathe Tools Bits Machinist Gunsmith Bit Sherline Lathe Tools Cutter Bits Rotary File Carbide Tip Boring Bars Tools Bit Shank Flute Straight Cut Tools Bits Bits For Tools Post Hss Square Tool Bits Counter Sink 1 2 Carbide 1 2 Hss 1 2 Shank 1 2 Shank Countersinks 1 2 Square 1 2 X 1 2 1 4 1 4 Shank 1 8 Shank 1 Sct Solid Carbide Boring Bars 1 Used 1 X 1 1 X 6 10 Cobalt 10 Pieces 1-1 2 1-1 4 16 Hss 16 Machinist 16 Shank 16 X 2 16 X 3 2 Flute 2 Inch 2 Inserts
 In 
 
Categories
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
1/4'' Double Cut Tungsten Steel Carbide Rotary Burr Die Grinder Shank Bit Set US
$
33.24
Buy It Now
Free Shipping
Condition: New
Location: Hebron, United States
Sander Pad & Sanding Blocks. Belt Sander Belts. Detail Sander Sandpaper. Woodworkers like to have many tools in their arsenal to shape and refine wood ... morecreations. Various bits give you different options and creative angles and shapes to work with.
10 PCS 1/2" X 1/2" X 4" M2 HSS TOOL BIT SQUARE LATHE FLY CUTTER MILL BLANK
$
49.99
Buy It Now
Free Shipping
Condition: New
Location: Tracy, United States
10PC Phillips Screwdriver Bit #2 x 2'' Power Bit Set #2 Phillips Chrome Vanad...
$
5.00
Buy It Now
Free Shipping
Condition: New
Location: Portland, United States
Power Bit Set #2 Phillips Chrome Vanadium, High Torque1939 Bit Length: 2" Designed to handle high torque applications. High quality chrome vanadium steel ... morefor long life and increased durability Precision milled tips that won't slip. Can be used with all hand, power, or cordless screwdrivers and drills.
8Pcs Tungsten Carbide Burrs Rotary Burr Set Head 1/4'' Shank Die Grinder Bit US
$
20.42
Buy It Now
Free Shipping
Condition: New
Location: Kansas City, United States
Quantity 8Pcs. 2 x Spherical Rotary Burr. 2 x Cylinder Rotary Burr. 2 x Torch Rotary Burr. 2 x Cylindrical Ball Rotary Burr. Ensure your burr shank is ... morewell inserted into your collet and clamped down tightly.
5 pc 3/8" Lathe Indexable Carbide Insert + Turning Tooling Bit Holder Set
$
25.99
Buy It Now
Free Shipping
Condition: New
Location: Tracy, United States
Inserts can be rotated to a new cutting edge without changing the position of the tool holder (each has three sides). 3/8" shanks. 2 pieces style "B" ... morefor turning, facing, boring, and for lead angles.
20Pcs Tungsten Carbide Steel Rotary Burr Die Grinder Bit 1/8in Shank Carving Set
$
17.48
Buy It Now
Free Shipping
Condition: New
Location: Whippany, United States
✨ Efficient: Machining hardness reach HRC70, for the most work,rotary burr set it can replace petiole small wheel. Quantity 20PCS. ✨ Double Cut Head: ... moreDouble-cut style has rows of cutting teeth cut in two intersecting direction s for fast material removal and a rougher finish.
8Pcs Tungsten Carbide Burrs Rotary Burr Set Head 1/4'' Shank Die Grinder Bit US
$
23.98
Buy It Now
Free Shipping
Condition: New
Location: Whippany, United States
Quantity 8Pcs. 2 x Spherical Rotary Burr. 2 x Cylinder Rotary Burr. 2 x Torch Rotary Burr. 2 x Cylindrical Ball Rotary Burr. Materia YG8 Tungsten Steel. ... moreGroove Double Rotary. SF-3: Tree shaped radius end 3/8" x 3/4"-1/4"shank.
1" Cylinder Single Cut HSS Rotary Burr File - American Made
$
6.00
Buy It Now
$4.98 Shipping
Condition: Used
Location: San Antonio, United States
Grobet USA Rotary Burr File We have many of these. We hand pick and inspect each one for condition and sharpness before shipping. Quantity of 1- HSS- ... more1" diameter- Shank: 25" Lightly used. 95 to 99% overall condition* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
Diablo DSC-S45 45 pc Screwdriving Set (45-Piece)
$
21.95
Buy It Now
Free Shipping
Condition: New
Location: Baldwin, United States
Includes: (1) 1 in. and (3) 2 in. #1 Square Drive Bit, (6) 1 in. and (1) 2 in. #2 Square Drive Bits, (1) 1 in. #3 Square Drive Bit, (1) 1 in. #10 Torx ... moreDrive Bits, (1) 1 in. #15 Torx Drive Bits, (4) 1 in.
20PC 1/4" CARBIDE TIP TIPPED CUTTER TOOL BIT CUTTING SET FOR METAL LATHE TOOLING
$
24.95
Buy It Now
Free Shipping
Condition: New
Location: Vancouver, United States
Description: An exceptional value for carbide lathe tool bits! Twenty piece set offers tremendous savings over bits sold individually. Includes ten C-2 ... moregrade bits and ten C-6 grade bits for cutting steel and alloys. 1/4" Specifications: 1/4" 10- C-2 Grade Bits 10- C-6 Grade Bits For cutting steel and alloys. SHIPS SAME DAY IF PAID FOR BY 4PM PST. Thanks for Looking Payment: We prefer You may pay instantly with PayPal by clicking the pay now button at the top. Return Policy: NO QUESTIONS ASKED! You may return the product within 30 days of receipt. Item must be returned in new condition. As received with all accompanied accessories and literature, including the factory carton. Shipping, handling is not refundable unless item is returned because of defect. If item is found defective return shipping will be refunded to the buyers paypal account once the item is verified defective. Buyer is responsible for return shipping costs and logistics for all returned items that are not defective. You must contact us within 30 days of receipt, to request an RMA number. Items received without an RMA number, will be refused and returned to the sender. Terms: Buyer assumes all risk of liability with respect to the purchase and use of the product/item. All of our pictures are photos of actual items. Colors or packaging of items delivered may vary from those photographed Payment is expected within 7 days of auction close. We cannot guarantee availability of product if we do not receive payment within 7 days. Shipping: Free shipping to the all of USA unless otherwise stated. Shipping discounts for multiple items will be done on a case by case basis for international buyers. WE SHIP FASTER and SAFER THAN MOST SELLERS JUST CHECK OUT OUR FEEDBACK! We stock all available items. And we ship from our warehouse. Most orders are shipped the same or next business day after payment received. We ship with Fedex ground or with the US Postal Service to physical addresses. Some items may be shipped to PO Boxes. Please inquire before bidd
5pcs Extra Long Carbide Burrs Set Shank Carbide Double Cut 1/4" Die Grinder Bits
$
29.99
Buy It Now
Free Shipping
Condition: New
Location: Cranbury, United States
Pro Combination Drill & Tap Bit Set w/ Quick Change Adapter 1/4" Hex Shank 13pc. 1/4 3/8 1/2 External Socket Torx Bit 35pc E Tamper Proof Security Star ... moreFemale. 60Pcs Master Torx Bit Socket and External Torx Socket Set | S2 and Cr-V Steel.
3/32" x 1/2" x 4" Inch Lathe Parting Cut Off Tool Holder Blades 5 Pieces HSS M2
$
31.00
Buy It Now
Free Shipping
Condition: New
Location: Jamaica, United States
CUT OFF PARTING BLADES SET OF 5 PCS ( 3/32" X 1/2" X 4"). Hawkwerkzegue comprises of a dedicated and skilled team of engineers with an aim of providing ... moreyou tools of highest indian industrial standards.
Cobalt / Vanadium Alloy Lathe Milling Tool Bits Vintage Tooling ** Lot of 85 **
$
36.00
2d 8h 8m 38s
1 bids
$9.00 Shipping
Condition: Used
Location: Barberton, United States
For sale here is a lot of two (2) used machining alloy steel tool bits of various sizes and lengths. 1/2",3/8",5/16",and 1/4" square tooling stock are ... morerepresented with brands including REX, Latrobe, EVM, Super Dread, Simmonds,Bethlehem, and MO-MAX. This lot contains 85 pieces and weighs 6.0 lbs. Above pictures show the lot and sublots. I accept PayPal and good checks to clear in advance of shipment. Buyer pays $9.00 Ground shipping cost to continental US destinations.
4Pcs Lathe Turning Tools 10Pcs Lathe Indexable Carbide Insert Boring Bar Holder
$
29.26
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
Lathe Accessories. S12M-SCLCR09 lathe tool holder. Twist Drill Bit. SCMCN1212H09 lathe tool holder. SCLCR1212H09 lathe tool holder. SCLCL1212H09 lathe ... moretool holder. Only a wrench is needed to replace the blade and gasket.
7 PC SET, 1/2" INDEXABLE TURNING TOOLS W/ CARBIDE INSERTS INSTALLED XS067
$
77.00
Buy It Now
$3.00 Shipping
Condition: New
Location: Thompson, United States
1/2" SQUARE INDEXABLE. TURNING TOOLS. LIST OF TOOL HOLDERS - INSERT INSTALLED ON EACH TOOL HOLDER. 7 PIECE SET. SET INCLUDES SCLCL 08-2J - CCMT 21.51. ... moreQA 1/2R-03 - CK3.
5 pc 1/2" Lathe Indexable Carbide Insert + Turning Tooling Bit Holder Set
$
27.99
Buy It Now
Free Shipping
Condition: New
Location: Tracy, United States
VISIT OUR STORE YOU MAY ALSO BE INTERESTED IN: iGAGING MAG& LIGHT SUPER BRIGHT MAGNETIC WORKBENCH LIGHT Bag of 25 Mushroom Plugs- 3/4" x 5/16" ... more1" SCREW THREAD MICROMETER MULTI ANVIL 1/4" Mini Snap In Hex Shank Keyless Electric Drill Chuck 9 Pair WAVY STEEL PARALLEL SET Machinist Tool 0.0002" 20 pairs Ultra Thin Parallels Matched Pairs GRANITE CHECK STAND SURFACE& DIAL INDICATOR 12" Center Finding Rule- Bevel Angle Gauge Pro FRONT END SERVICE TOOL KIT 1" 2" INSIDE MICROMETER w/CARBIDE TIPS- 5- 1/2" MINI LATHE INDEXABLE CARBIDE INSERT TOOL BIT SET BRAND NEW* IN STOCK* Available For Immediate Shipping Click Small Images to Enlarge Click Small Images to Enlarge- Top quality indexable lathe bits. With replaceable tips! Inserts can be rotated to a new cutting edge without changing the position of the tool holder(each has three sides) C6 carbide tips with chip breaker. 1/2" shanks. Features: Includes 5 inserts TCMT110204 2 pieces style"A" for turning. Facing, boring, and chamfering 2 pieces style"B" for turning. Facing, boring, and for lead angles 1 piece style"E" for turning. Facing, boring, chamfering, threading, and V-grooving Hex wrench Nice wooden storage case Real People. Real Buyers. Real Products. Real Feedback. Recent feedback that we received on this product: good stuff.Fast shipping,work great rornme 370457645309 great product very fast shipping overall very pleased fast5racing 370457645309 Very nice items. Shipped promptly, great transaction, thanks! A+++++ lexustyle 370457645309 Exactly as advertised with speedy shipping. ++++++++++++++++++ 1eagleglobeandanchor 370457645309 Great transaction! FAST delivery. Will buy again. copperslug 370457645309 page for Deal of The Week Important Information Shipping: WE SHIP FASTER and SAFER THAN MOST SELLERS! We stock all available items. And we ship from our warehouses. We never use drop shipping. Most orders are shipped the same or next business day after payment received. We ship
11 PCS 5/16“ CARBIDE TIP TIPPED CUTTER TOOL BIT CUTTING SET METAL LATHE TOOLING
$
34.95
Buy It Now
Free Shipping
Condition: New
Location: Woodland, United States
Handle a variety of projects with this versatile lathe tool set! The lathe tool set includes a cranked turning/facing tool, a cranked facing tool, a cranked ... moreknife tool, a rough boring tool, an inside corner tool and a recessing tool.
1/4-28 Threaded Collet Set 40, 30, 21, 10, 1/4 For Pneumatic Angle Drill
$
15.00
Buy It Now
$4.59 Shipping
Condition: Used
Location: San Antonio, United States
Threaded Collet Set. - For use with straight shank drill bits. - Sizes include #40, #30. #21/20, #10, and 1/4. - Located on the top right of the page.
2 NEW! Benchmark 1/2" Carbide Chamfer Tool 2FL 90° D/E 925000090DEC4
$
31.00
2h 24m 2s
12 bids
$8.65 Shipping
Condition: New
Location: Lansing, United States
Superior Machine & Tool, Inc. Product Condition: New.
20PC 3/8" CARBIDE TIP TIPPED CUTTER TOOL BIT CUTTING SET FOR METAL LATHE TOOLING
$
34.95
Buy It Now
Free Shipping
Condition: New
Location: Vancouver, United States
Description: An exceptional value for carbide lathe tool bits! Twenty piece set offers tremendous savings over bits sold individually. Includes ten C-2 ... moregrade bits and ten C-6 grade bits for cutting steel and alloys. 3/8" Specifications: 3/8" 10- C-2 Grade Bits 10- C-6 Grade Bits For cutting steel and alloys. SHIPS SAME DAY IF PAID FOR BY 4PM PST. Thanks for Looking Payment: We prefer You may pay instantly with PayPal by clicking the pay now button at the top. Return Policy: NO QUESTIONS ASKED! You may return the product within 30 days of receipt. Item must be returned in new condition. As received with all accompanied accessories and literature, including the factory carton. Shipping, handling is not refundable unless item is returned because of defect. If item is found defective return shipping will be refunded to the buyers paypal account once the item is verified defective. Buyer is responsible for return shipping costs and logistics for all returned items that are not defective. You must contact us within 30 days of receipt, to request an RMA number. Items received without an RMA number, will be refused and returned to the sender. Terms: Buyer assumes all risk of liability with respect to the purchase and use of the product/item. All of our pictures are photos of actual items. Colors or packaging of items delivered may vary from those photographed Payment is expected within 7 days of auction close. We cannot guarantee availability of product if we do not receive payment within 7 days. Shipping: Free shipping to the all of USA unless otherwise stated. Shipping discounts for multiple items will be done on a case by case basis for international buyers. WE SHIP FASTER and SAFER THAN MOST SELLERS JUST CHECK OUT OUR FEEDBACK! We stock all available items. And we ship from our warehouse. Most orders are shipped the same or next business day after payment received. We ship with Fedex ground or with the US Postal Service to physical addresses. Some items may be shipped to PO Boxes. Please inquire before bidd
5 pc 1/4" Indexable Carbide C6 Insert Tool Bit & Holder Mini Lathe Set
$
22.99
Buy It Now
Free Shipping
Condition: New
Location: Tracy, United States
Inserts can be rotated to a new cutting edge without changing the position of the tool holder (each has three sides). 1/4" shanks. 2 pieces style "B" ... morefor turning, facing, boring, and for lead angles.
8Pcs Tungsten Carbide Burrs 8mm Rotary Burr Set Head 1/4'' Shank Die Grinder Bit
$
23.98
Buy It Now
Free Shipping
Condition: New
Location: Whippany, United States
They are essential tools for professionals and hobbyists alike. ✨Compatible with High-Speed Tools: These burrs work seamlessly with high-speed electric ... moregrinders or pneumatic tools, ensuring efficient material removal and shaping.
Tungsten Carbide Burr Bit Set cutting carving routing bur For Dremel Rotary Tool
$
10.89
Buy It Now
Free Shipping
Condition: New
Location: Brooklyn, United States
These Burr Bits Work On. Routing, And. Shank Length: 22mm. Brass, Copper & Bronze. Plastic, Carbon Fiber Reinforced Plastic (CRP), Glass Fibre Reinforced ... morePlastic (GRP). And More - They Are Perfect For.
SB-1 SOLID CARBIDE BURR 1/4 shank - DOUBLE CUT - 1/4 cut diameter FREE SHIPPING
$
12.50
Buy It Now
Free Shipping
Condition: New
Location: Watkinsville, United States
1/4" Shank. 90 degree cutting angle.
Crucible Steel Co. 5 REX AAA HSS 1/4" Lathe Tool Bits, New Old Stock
$
28.00
Buy It Now
$5.00 Shipping
Condition: New
Location: Dallas, United States
BOX NOT INCLUDED Crucible Steel Company Lathe tool bits, Rex AAA High Speed Steel. 1/4 "New old stock Manufactured in 1959. Price is for 5 pieces. 
8Pcs Tungsten Carbide Burrs Rotary Burr Set Head 1/4'' Shank Die Grinder Bit US
$
21.55
Buy It Now
Free Shipping
Condition: New
Location: Brooklyn, United States
Nail Grinder for Human Toenail Sander for Thick Nails Cordless 4 Speeds. 2 x Cylindrical Ball Rotary Burr. 2 x Spherical Rotary Burr. 2 x Torch Rotary ... moreBurr. 2 x Cylinder Rotary Burr. Ensure your burr shank is well inserted into your collet and clamped down tightly.
HSS 3/32'' x 1/2'' x 4-1/2'' Cut Off Blade Cut-Off Parting Blade High Speed
$
11.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Nice- Original Williams High Speed Cut-off Blade. Stamped WILLIAMS HIGH SPEED 2410 3/32 x 1/2. In fine order. As shown. Always combine shipping- If you ... moreare planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
SC42D Cut Solid Carbide Burr Bur Cutting Tool Die Grinder Bit 1/8" MADE IN USA!!
$
9.95
Buy It Now
Free Shipping
Condition: New
Location: Morrow, United States
Can't beat that". Quality made right here in USA. Will buy from again! "High quality USA Made. Perfect for my project". "good quality tools!". Will buy ... morefrom again!
6×Rotary File Rotary Bit Set port and polish kit cylinder head aluminum porting
$
32.19
Buy It Now
Free Shipping
Condition: New
Location: China
Could cut cast iron, cast steel, carbon steel, alloy steel, stainless steel, copper, aluminum, marble, jade, bone, etc. There are total 6 pieces burrs ... morein various shapes that you can use for many purposes.6mm round shank would fit many electric powered or pneumatic powered tools.
4Pcs Long Reach Rotary Burr Double Cut Tungsten Carbide Bit 1/4 Inch Shank US
$
19.72
Buy It Now
Free Shipping
Condition: New
Location: Hebron, United States
4Pcs Milling Cutter. Tactical Fast Micro Red Dot Riser Mount Fit For H1 H2 T1 T2 20mm Picatinny Rail. Dual Chamber is crossover lines, easy to block the ... morelines, more suitable for the object of relatively low density material.
6pcs 10mm Rotary Aluminum Cut Burr 6mm 1/4" Shank 150mm Long Reach Carbide Burs
$
24.69
Buy It Now
Free Shipping
Condition: New
Location: United States
6pcs Rotary Files. ✔ Material: Tungsten Steel. ✔ Single cut style has rows of cutting teeth cut for fast material removal and a rougher finish. Be careful ... moreand do not to force too much (the pressure is generally not more than 4 kg).
4 Rotary Burr Set Head Tungsten Carbide Burrs 1/4'' Shank Double Cut Carbide Bit
$
18.75
Buy It Now
Free Shipping
Condition: New
Location: Del Mar, United States
Tool Bit Material Alloy/ tungsten steel. 4Pcs Milling Cutter. Dual Chamber is crossover lines, not easy to block the lines, more suitable for the object ... moreof relatively low-density material. Specification of handle: 6mm.
LOT ( 4 PCS ) NEW 1/2" BALL CARBIDE DOUBLE CUT BURS BURRS TOOL MACHINIST BITS
$
0.99
5d 11h 29m 10s
1 bids
Free Shipping
Condition: New
Location: Kingman, United States
MANUFACTURER UNKNOWN ! LOT OF ( 4 ) !
1 NEW 1/4" (.250) SHANK CARBIDE BURRS. SB1L. DOUBLE CUT. END CUT USA MADE {G78}
$
9.95
Buy It Now
Free Shipping
Condition: New
Location: Mentor, United States
Diamond cut burrs are very effective on heat treated and tough alloy steels. Surface finish and tool life is reduced. DIAMOND CUT. COMMON SHAPE FOR ANY ... moreJOB. We describe our tooling as it is, we do not hide anything.
NEW FREUD Diablo DSC-S24 24 pc Screwdriving DRIVE BIT TORQUE RESISTANT Set CASE
$
17.99
Buy It Now
Free Shipping
Condition: New
Location: Redding, United States
Includes: (1) 1 in. and (2) 2 in. #1 Square Drive Bit, (1) 1 in. and (1) 2 in. #2 Square Drive Bits, (1) 1 in. #3 Square Drive Bit, (1) 1 in. #10 Torx ... moreDrive Bit, (1) 1 in. #15 Torx Drive Bits, (2) 1 in.
Qty8 8x High Speed Steel Lathe Cutting Tool Bits Bar HSS Apx 5/16 x1/8 x1 1/2in
$
7.99
Buy It Now
$5.00 Shipping
Condition: Used
Location: Atlanta, United States
These measure 0.322x0.142x~1.5in(8.15x3.6x~38mm) the length can vary a little. They have a 0.169in(4.29mm) hole. The picture is a random sample of what ... moreyou get. They each have a unique serial number. Most are sharp or resharpened or may have some use. They may have some stains or small amount of residues or rust. Might be slightly magnetic. The hole may not be centered if one side or the other has been sharpened more. Work well on aluminum. Brass and plastics, have not tried anything else. You get 8 of them.
Diablo by Freud DSC-S14 14 pc Screwdriving Set (14-Piece)
$
15.00
Buy It Now
Free Shipping
Condition: New
Location: Baldwin, United States
Includes: (3) 2 in. #2 Square Drive Bits, (1) 2 in. #15 Torx Drive Bit, (3) 2 in. #20 Torx Drive Bits, (2) 2 in. #25 Torx Drive Bits, (1) 2 in. #30 Torx ... moreDrive Bit, (1) 2-3/8 in. Magnetic Drive Bit Holder, (1) 5/16 in.
1/4 Head Tungsten Carbide Double Cut Rotary Burr Set w/ 1/8 Inch Shank Bit,10pcs
$
11.99
Buy It Now
Free Shipping
Condition: New
Location: Walnut, United States
Be careful about mounting and handling the burr correctly. 10Pcs Rotary Tool Drill. Shank Length:35mm-45mm. Groove: Double Cut (or Diamond Cut). Grinding ... morethe hole to an accurate shape. Cutting Dia:6mm.
6pcs 10mm Rotary Aluminum Cut Burr 6mm 1/4" Shank 150mm Long Reach Carbide Burs
$
24.99
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Brand new & high quality High production efficiency & long service life Easy to use, safe, reliable and durable Commonly used to process cast iron, cast ... moresteel, alloy steel, copper, aluminum, marble, jade, bone etc. Color: Gloss Material: Tungsten Steel Hardness: HRA≥85 Shank diameter: 6mm (about 1/4") Cutting edge diameter: 10mm Total Length: 148mm-168mm (see picture) Quantity: 6pcs/set Note: 1. Please make sure to hold the cutting tools in place when the carbide burs are used in pneumatic or electric machines as the speed will generally reach as high as 6000-40000 rev / min.
1/2" Titan SA-5 Carbide Burr Double Cut Cylindrical 1/4" Shank 1" LOC 2.75" OAL
$
13.82
Buy It Now
Free Shipping
Condition: New
Location: Prairie Village, United States
Shank Length. Head Length.
4 NEW CBN TIPPED CARBIDE BORING BARS .360" HEAD WIDTH 3/8" SHANKS CBN-B3601150
$
39.00
9h 32m 6s
9 bids
$10.25 Shipping
Condition: New – Open box
Location: Ellington, United States
SCT #CBN-B3601150. 3/8" Shanks.360" Head Width.
3 NEW! Harvey 90° Carbide Radius Point Engraving Cutter .005R 1/4"SHK 48430
$
11.00
2h 42m 2s
3 bids
$8.65 Shipping
Condition: New
Location: Lansing, United States
1301 Sunset Avenue | Lansing, MI 48917. Product Condition: New.
Lathe Tool Bit High Speed Steel Lot Of 13 : 3/8” & 5/16” & 1-4”
$
24.95
Buy It Now
$5.88 Shipping
Condition: Used
Location: Belleville, United States
Lathe Tool Bit High Speed Steel Lot Of 13 : 3/8” & 5/16” & 1/4”7 @ 3/8”5 @ 5/16”1 @ 1/4”Pre-owned with general age & usage wear. See photos as part of ... moredescription.Prompt & secure handling & shipping. USPS Ground Advantage shipping.
Acme grooving tool cut off tool/parting tool blade 5 3/4 L X .810”W X .125 Thick
$
5.00
8h 22m 10s
0 bids
$5.35 Shipping
Condition: New – Open box
Location: Greensburg, United States
10Pcs Head Tungsten Carbide Steel Rotary Burr Die Grinder Bit Shank Carving Set
$
11.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
Material: Tungsten Steel. This set is a professional grinding heads for teeth drill machine, necessary tool for polishing and smoothing. not have a now?. ... moreEasy to and, directly wash it from water and it through alchhol, save you much.
MICRO 100 ITL-2301000 LH carbide thread boring bar (for #10 to 48 TPI) 5/16 Shk
$
28.50
Buy It Now
$3.50 Shipping
Condition: New
Location: Hoffman Estates, United States
1/4'' Double Cut Tungsten Steel Carbide Rotary Burr Die Grinder Shank Bit Set
$
11.60
11h 34m 25s
0 bids
Free Shipping
Condition: New
Location: Monroe Township, United States
Type: Rotary Burr. These 5PC HSS rotary burrs are perfect forjobs like Model making and the like. 5 x rotary burrs. Using an engraving machine or mini-Drill ... morevarious forms of cutting part provide efficient processing which materials length is about 40mm.
Lot Of 13 Piece E.P. Heller Co. Solid Carbide Bits Variety
$
25.00
Buy It Now
$12.45 Shipping
Condition: Used
Location: Jacksonville, United States
Condition is pre-owned. Bits have normal use wear see photos.
1 NEW MICRO 100 SOLID CARBIDE THREADING BAR. IT-2301000. USA MADE (A148)
$
27.95
Buy It Now
$5.00 Shipping
Condition: New
Location: Mentor, United States
Max bore depth: 1000. We describe our tooling as it is, we do not hide anything. MADE IN USA.
8Pcs Tungsten Carbide Burrs Rotary Burr Set Head 1/4'' Shank Die Grinder Bit US
$
21.25
Buy It Now
Free Shipping
Condition: New
Location: Brooklyn, United States
20 /30 oz Splash Spill Proof Magnetic Slider Lid for YETI Rambler Tumbler Cup. 2 x Cylindrical Ball Rotary Burr. 2 x Spherical Rotary Burr. 2 x Torch ... moreRotary Burr. 2 x Cylinder Rotary Burr. Ensure your burr shank is well inserted into your collet and clamped down tightly.
5x File 1/4in Hex Shank Double Cut Metal Grinder Drill Bit Set
$
14.00
Buy It Now
Free Shipping
Condition: New
Location: United States
Made of high quality high speed steel, not easy to deform and very durbale for long use. Note: file handle is 1/4in hex handle. Choose a suitable grinding ... moretool. Make sure that the file is installed firmly before grinding.
Accusize Industrial Tools 8-Piece HSS Tool Bit Set, 1/2'' Shank Lathe Bits Sets
$
59.00
Buy It Now
$12.99 Shipping
Condition: New
Location: United States
1 (ONE) Accusize Industrial Tools 8-Piece HSS Tool Bit Set, 1/2" Shank Lathe Tools. 80° Lathe tool (left hand). 80° Lathe tool (right hand). 60° Lathe ... moretool (left hand). 60° Lathe tool (right hand). External cutter.
Lot of (49 ) Various Size USED & NEW Lathe Bits Blanks & Cutting: MO-MAX, REX +
$
5.00
1d 2h 55m 59s
0 bids
$40.00 Shipping
Condition: Used
Location: Scarsdale, United States
This lot includes 49 lathe bits blanks and cutting tools of various sizes from brands such as MO-MAX and REX+. The collection includes 52 pieces in total ... moreand is perfect for those in the metalworking industry seeking to expand their tool collection. Each item has been carefully inspected to ensure quality and reliability, providing you with the tools you need to complete your projects with precision.
HSS LATHE FORM TOOL SET SQ SHANK 1/4" X 1/4" X 2.5" HARD M2 GRADE 6MM
$
39.89
Buy It Now
Free Shipping
Condition: New
Location: Jamaica, United States
HSS lathe turning tools/ HSS lathe cutting tool/ High speed steel tool bit set – Set of 8 Pcs. Set consists of different High Speed Tool Bit / M2 Tool ... moreBit for turning and facing work on lathe. INTERNAL BORING BAR BLIND HOLES-Internal Threading 60.
1/4'' Double Cut Tungsten Steel Carbide Rotary Burr Die Grinder Shank Bit Set
$
12.39
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Type: Rotary Burr. These 5PC HSS rotary burrs are perfect forjobs like Model making and the like. 5 x rotary burrs. Using an engraving machine or mini-Drill ... morevarious forms of cutting part provide efficient processing which materials length is about 40mm.
Cogsdill/ DeBurr Master #20/21 (5/32) In/Out Deburring Tool Aircraft Tool
$
20.00
Buy It Now
$4.59 Shipping
Condition: Used
Location: San Antonio, United States
Cogsdill/ DeBurr Master Deburring Tool. - Located on the top right of the page.
AR8 C6 - 1/2" Lathe Turning Tool Bit Right Hand Carbide Tipped Made In USA L3
$
10.78
Buy It Now
$5.00 Shipping
Condition: New
Location: Cochran, United States
Grade C6: For general purpose use in steel. For turning to a square shoulder.
TPGB-321 Single Carbide Insert
$
8.00
Buy It Now
$5.00 Shipping
Condition: New
Location: Eagle Point, United States
2 PCS 1/2" X 1/2" X 4" HSS TOOL BIT SQUARE LATHE FLY CUTTER MILL BLANK
$
18.50
Buy It Now
$4.00 Shipping
Condition: New
Location: Huntington Beach, United States
| | | | | | | All Industrial part# ALL-19766-10, M2 ground high speed steel tool bits show exceptional results on mild steel. Alloys and tools steels. ... moreCommonly used on a lathe. A milling machine flye cutter or a metal shaper. This tool bit makes for a great finishing tool. Dimensions: 1/2" width x 1/2" height x 4" OAL. We combine shipping! Complete the buy it now and we'll send you a combined shipping invoice to pay from, For additional sizes and great pricing on tool bits please visit the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships from USA- same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote New machine or tooling up for a big job? Contact us for best pricing guarantee! 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will be shipped within 1-2 business days after full payment is received(same day if possible) For international orders, buyers are fully responsible for duties and custom fees which may be charged upon delivery(please contact your local post office to determine estimated taxes and duty fees) While we can ship to P.O. boxes, Hawaii, Alaska, Puerto Rico, and international addresses, there m
25 NEW 1/8" (.125) SHANK CARBIDE BURRS. GREAT VARIETY OF SHAPES. USA MADE K46
$
39.95
Buy It Now
Free Shipping
Condition: New – Open box
Location: Mentor, United States
GREAT VARIETY OF SHAPES. STANDARD SIZE SHANKS. A FEW DIFFERENT SHAPES FOR MANY DIFFERENT JOBS. SO YOU MAY GET DIFFERENT QUANTITIES OF DIFFERENT SHAPES ... moreFROM WHAT I HAVE SHOWN ABOVE. ALL GREAT QUALITY.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
LOT OF 5 LEATHERMAN MICRA MULTI TOOL SCISSORS KNIFE POCKET MINI ASSORTED SILVER
LOT OF 5 LEATHERMAN MICRA MULTI TOOLS SILVER. MAY HAVE LOGOS OR ENGRAVINGS. IN GOOD USED CONDITION. MAY NEED A LITTLE CLEANING. ALL PARTS ARE COMPLETE AND FUNCTIONAL AND HAVE BEEN OILED. THESE RANGE FROM GOOD TO LIKE NEW CONDITION. I SHIP VIA USPS SMALL FLAT RATE BOX. I CAN FIT A LOT OF THESE TOOLS IN A BOX SO IF YOU WIN MULTIPLE MICRA AUCTIONS, I WILL COMBINE TO SAVE YOU MONEY. I ship worldwide. Payment must be made within 3 days of auctions close unless prior arrangements are made. All sales are final. I will combine multiple auctions on like items when possible. Please feel free to ask any questions. Thanks for bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
MATCO 4 Piece Carbide Burr Set # ZK$
Three of the burrs are in very good condition.The fourth one(pictured third from the left) shows more use
CLOCK JEWELRY FABRICATION REPAIR TOOL DRILL BITS CARBET REPOINTED CARBIDE
PRICED TO SELL! Please call me at 408 757 1602 with any questions instead of emailing– I really have no time to answer emails and do not really know much about the items that I am selling. They all came from a clock shop that closed a while ago and I purchased them just because I badly wanted some of their tools and now I am selling their inventory on eBay to repay for my investment. VINTAGE CLOCK JEWELRY FABRICATION REPAIR TOOL DRILL BITS CARBET REPOINTED CARBIDE I DON’T KNOW MUCH ABOUT THIS ITEM. THEREFORE I AM SELLING IT AS IS, WHATEVER IT IS. I AM JUST TAKING THESE ITEMS OUT OF BOXES AND MAKING AS MANY PICTURES AS I CAN TO SHOW ALL THE DETAILS. I TRY TO HELP WITH A VERBAL DESCRIPTION BUT UNINTENTIONALLY I CAN NAME IT WRONG AND I DON’T WANT TO MISLEAD YOU. I CANNOT GIVE ANY GUARANTEE. I AM SELLING FOR PARTS OR REPAIRS ONLY. I DON’T WANT ... moreANY PROBLEMS AND DON’T WANT TO DEAL WITH RETURNS. PLEASE BID ONLY IF YOU KNOW EXACTLY WHAT YOU ARE DOIING AND CAN AFFORD TO BUY. OUR DESCRIPTION: PLEASE CHECK MY OTHER ITEMS! PLEASE CHECK MY OTHER ITEMS! PLEASE CHECK MY OTHER ITEMS! PLEASE CHECK MY OTHER ITEMS! CLICK HERE TO SEE MY I made a lot of pictures to show details and am sorry for my unprofessional comments– please do not rely on my unprofessional opinion and bid on the pictures only. Everything is listed as is, exactly as pictured. You will receive the exact item as it was pictured. if you buy several items I will combine shipping. Payment is due in three days, if you cant pay on-time please let me know, otherwise after 3 days your account will be blocked and you will not be able to bid on more of my items in the future. If you choose economy shipping option, the item will be shipped at your own risk by the least expensive method, please choose the EXPEDITED shipping option for speedy insured delivery. I do have a 14 days return policy– please read it before you bid. I don’t change the terms of the purchasing contract after the sale– please ask all questions and concerns before you bid. I do leave POSITIVE feedbac
Antique Dentist's Drill Assembly with Tooling and Second hand Piece
This is a used Dentist Desktop Electric Drill Assembly that we got for my wife for her art work of mixed media. It works and has varialble speed as controlled by a foot pedal. It's a wee bit slow for her. She prefers her Dremel Tool for fine detail word or her die grinders for larger pieces. While it works. The electrical cords must be replacesd as these originals show deterioration to the point of being a hazard. Included is a box of various burrs and polishing items in case you wanted to get into a new profession. It comes with a second hand piece however the little thing-a-ma-jig to lock it into the what'ch'ma'call-it is broken. Yes, I do try to use the proper techical terms. Show this to your kids and tell'em if they don't take care of their teeth. They won't be going to a real dentist, you'll take care ... moreof it. Shipping to the lower(where else would they be? 48 States via USPS with that overpriced insurance and delivery confirmation is $28.75. I'm out of town a couple of days a week and can't ship quickly.
ZEPHYR TOOLS ZT680-QC AIRCRAFT MICRO STOP COUNTER SINK WITH BIT AIRCRAFT TOOL
ZEPHYR TOOLS ZT680-QC AIRCRAFT MICRO STOP COUNTER SINK WITH BIT AIRCRAFT TOOL ZEPHYR TOOLS ZT680-QC AIRCRAFT MICRO STOP COUNTER SINK WITH BIT. THIS IS A USED MICRO STOP THAT IS IN WORKING CONDITION. IT HAS THE QUICK CHANGE SHANK. THIS ONE HAS A 1/4" THROW. PLEASE LOOK AT THE PICTURES THOROUGHLY BEFORE PLACING A BID. UNFORTUNATELY DUE TO USPS RAISING THEIR PRICES. WE HAVE HAD TO RAISE SHIPPING. WE DO COMBINE SHIPPING. IF IT FITS IT SHIPS! WE STRONGLY SUGGEST COMBINED SHIPPING ON MULTIPLE ITEMS. If a problem arises with anything we sell please contact us first before feedback is left.We will do whatever is needed to make you happy.Thanks California bidders are subject to state sales taxes to be paid by bidders.We are a California corp and pay taxes on items sold in Ca.Thanks Please make payment withing 7 days unless you are combining flat ... morerate shipping and have notified us.California residents are subjuct to state tax. We gladly combine shipping.We use usps flat rate mail for the majority of our shipping. We ask one thing from our customers.If you win an auction please pay for the auction.This is our livelihood and how we support our families.We look forward to serving for years to come. I am Tony Lauriano( TLAURIANO) 10 years selling on EBAY. I will be providing top notch customer service for years to come.I am looking to increase my previous customer base and expand into new markets. I offer fast friendly service. A 7 day refund and a pledge to make our customers happy. You can contact us through the ask seller link provided on this page
Milwaukee Steel Hawg Magnetic Drill, Cat No. 4245
Milwaukee Steel Hawg Magnetic Drill. Cat No. 4245. Comes with 1 bit. Non-working. Parts only. Magnet is not engaging. Power switch was reported as bad. SN 782-1659. 120 Volts. 11.5 Amps, 2 speed. High Speed: 1000 RPM no load. Low Speed: 500 RPM. Cutter Capacity High Speed: 1/2" to 1" Diameter. Cutter Capacity Low Speed: 1 1/16" to 2" Diameter. Unit Dimensions: 18 1/2"L x 13"T x 4 1/2"W approx. Unit Weight: 37 lbs approx. All items are sold AS IS and as shown without warranty. This does not mean the item doesn't work. Only that we have not tested it and/or do not have the capability to test it. Payment must be made within 4 days* We want you to be completely satisfied with your order. Please contact us should you have any concerns so that we can immediately address them. If you have questions you can ... morereach Wade at 503-730-3131. Pacific Standard Time
MICRO 100 CARBIDE TIPPED BORING BARS AND TOOL HOLDING BAR MACHINIST TOOLS *F
MICRO 100 CARBIDE TIPPED BORING BARS AND TOOL HOLDING BAR Condition/I n fo: Micro 100 TBB.375. 6 inches long; Micro 100 TBB.500, 7 inches long, and the last one holds cutting tools, slot is.191, shaft dia is.625 and length is 5" I also have 2 more, not pictured that I will include in this lot at no extra charge. Zoom in to see more detail. All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Many items will fit into a medium flat rate box for $12.35. Notify me when you are done bidding and wait for me to send you an invoice. Foreign ... morebuyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured. Check out my other items! Be sure to add me to your favorites list! Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
LOT OF 20 1/4" CUTTING TOOL BITS FOR ATLAS CRAFTSMAN METAL LATHE
NICE LOT OF 20 1/4" CUTTING TOOL BITS FOR ATLAS CRAFTSMAN METAL LATHE. WILL ALWAYS COMBINE SHIPPING WHEN POSSIBLE. ANY QUESTIONS FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items. 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13e059829f8-0xf3-
6pc Milling Cutter Set
HSS. 6pc Some look like they have not been used, all appear to be sharp 3/4" Shank. 3/4" 7/8" 1" 1 1/8" 1 1/4" 1 1/2" Includes wood block.
15 Vintage VASCO SUPREME 3/8" sq 5% Cobalt Made In USA Machinist Lathe Tool Bits
From an estate a lot of vintage Made in The USA not import HSSCO 3/8 square VASCO SUPREME tool bits(Vanadium Alloys Steel Co.a div of Anchor Drawn Steel in PA. Most have the name on them but i believe the whole lot are the same as they all have scribing on them from previous company. From what i can tell from researching this brand these have 5% cobalt in them.See spec sheet below.Also from reserching the Practical Machinist forum these are excellent form holding tool bits. Please see my other auctions as i will be listing more lots of these. Please ask any questions before bidding. Thank you and Happy Bidding! Tool Steels Vasco Supreme(tm) Related Metals: ASP 2015(tm) T15 CPM REX T15(HS)tm) Dyna-Van(tm) Supreme)tm) CPM REX T15(tm) CPM T15(HS)tm) Specifications: ASTM A600(T-15) DIN 1.3202 UNS T12015 Chemistry Data Carbon 1.5- 1.6 Chromium ... more3.75- 5 Cobalt 4.75- 5.25 Iron Balance Manganese 0.15- 0.4 Molybdenum 1 max Phosphorus 0.03 max Silicon 0.15- 0.4 Sulphur 0.03 max Tungsten 11.75- 13 Vanadium 4.5- 5.25 Posted with
5/8" x 1/4" CARBIDE BURRS
3 pcs) Resharpened 5/8" x 1/4" CARBIDE BURRS Stock location F8-1 Any questions please feel free to contact us. Increase Sales by 18% and double your hits- Vendio Gallery. Jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13e0a67f249-0xe3-
MACHINIST LOT OF 56 COBALT HI SPEED LATHE TOOL BITS / THREADING & GROOVING
I HAVE 56 HI SPEED TOOL BITS. MOST ARE NEWER OLD STOCK, ALL BUT 3-4 TIPS ARE VERY SHARP, ALL ARE USEABLE, SOME HAVE LIGHT STAINING OR LIGHT RUST FROM SITTING. THEY HAVE BEEN STORED AWAY FOR YEARS, I DO HAVE MORE TOOLING, CHECK OUT MY OTHER ADS FOR SOME, AND MORE TO LIST LATER. THESE ARE OD& ID THREADING TIPS, OD& ID GROOVING, SOME ARE FORMING, 1 NEW 1/4" WIDE CUT OFF TOOL BIT UP BY THE 12 IN. SCALE ON THE RIGHT. THE LONGER OD THREADING TIPS ARE 3/8 WIDE X 3/4 TALL. THE SMALLER ONES ARE FOR ID TH'D. AND ARE 3/8'S& 1/2" SQ. SOME FORM TOOLS ARE 3/8" 1/2" WIDE. THE 12" SCALE& QUARTER DO NOT COME WITH TOOLING. SALES AND SHIPPING IN USA ONLY
HOUGEN 3-12234 ROTABROACH ANNULAR CUTTER DRILL 1-1/16" BIT 3" DEPTH Ships Free!
Comes just as you see it pictured. This item will be shipped anywhere in the lower 48 states via UPS. At this time we do not post outside the contiguous United States. Items shipped are insured for the purchase price. Please allow 2-3 business days handling time from the time of payment. Please feel free to contact us at any time to ask questions about shipping and we will answer them to the best of our ability.
49 Rare Antique Metal Lathe Tool Cutter Bits-Vintage Machinist Tools
I recently obtained metal lathe related tools and accessories which I will be listing in several auctions. Items include several sets of chuck jaws. Steady rest, tool cutting bits, tool holders, live and dead centers and a vise. These are all for small to mid size lathes. I do not know the make of lathes these items originally came from, many items can fit a variety of different lathes. These items are all used in useable condition showing normal wear and usage. I can combine shipping on most of these items and due to weight I will use USPS flat rate priority boxes to ship if this is the cheapest and items will fit. View photos and measurements provided for condition and to see if items meet your needs. This listing is for the following: This listing is for 49 antique tool cutting bits for use on a metal lathe. These tools are hard to find ... moreif you have a very early lathe. I couldn’t find them on ebay or in my tool catalogs that go back to the 1920’s. I do not have the tool holder for these bits. These came in a homemade wood box with holes drilled for bits. These bits are in good condition and can be re-shaped and sharpened to meet your needs. The box is included with this lot. This lot sells without reserve and“as is” I do not take offers after the auction ends on items that do not sell. If you are interested in this lot. Make a bid. This lot ships with a USPS tracking number, buyer may request insurance. I DO NOT SHIP OUT OF THE UNITED STATES. RETURN POLICY* On items I sell I try to provide as much descriptive and photographic information on condition. Size, known damage and what it is you are buying as my space and knowledge will allow. I try to provide as accurate information as possible and will try to answer additional questions when asked, if possible. If an item is listed as untested or unknown if item works, it is usually because I have no ability or means of testing it, not that the item does not work, it means I do not know. For this reason if an item is listed as selling“as is” there is no
Universal Series C Spade Drill Bit Inserts 1 29/32" HSS
Universal Series C Spade Drill Bit Inserts 1 29/32" HSS Material: HSS Size: 1 29/32 Thickness: 5/16 Locating Area: 1 1/4 Series: C. AMEC equivalent: 10234-0129. This item is in good used condition and fully functional. If buying more than one item. Wait for invoice for combined shipping. On Jan-01-13 at 08:01:36 PST. Seller added the following information:
5 Pcs. Lot Solid Carbide-Groove Boring Bar-Micr 100
ALMOST NEW- 5 Micro 100 Carbide Boring Bars- used only 1 time to take out.020 of plastic. You wont be dissapointed. Check out my other auctions. I have plenty more of the same size. All 5 still have there sharp points. So i have to list them as used but are almos new. If you had to buy these new you would be paying almost $40 a piece. You can own all five for that price. I have sold over a thousand bars and have no complaints to date. RRL-087-20 is the number on the boring bar Will combine shipping if win other auctions Free shipping to US. Shipping to Canada is $6.00 Posted with Posted with
HSS Steel High Speed 1 1/4" Drill Bit 1 3/4" Shank Machinist Tool **NO RESERVE**
GEMSYMONS ESTATE TREASURES GOLD& SILVER MAKE A GREAT GIFT OR INVESTMENT VALUE HAS NEVER BEEN BETTER.99 CENTS OPENING BID ALL ITEMS NO RESERVES! WE OFFER A TRUE ABSOLUTE AUCTION EVERYONE GETS AN EQUAL CHANCE All items are estate items. They may be new or used, but it will be clearly stated which. We sell nothing damaged or broken. No jewelry items are plated or filled unless clearly stated. We take pride in all the items we sell and want every transaction to be a happy one. We offer a 14 day no questions asked return policy. We value our feedback, so please contact us prior to leaving less than positive feedback so we may correct any problem you may have with your purchase. We are not perfect but we try our best to please our buyers. My name is Les and I will be happy to help any way I can. Thanks For Your Business! ITEM UP FOR AUCTION ... moreDESCRIPTION: H SS Steel High Speed 1 1/4" Drill Bit 1 3/4" Shank Machinist Tool(Great Shape. Very Little Use) SPECIAL NOTE: THIS ITEM IS TOP QUALITY. IN PERFECT WORKING CONDITION AND CAME FROM A HIGH END MACHINE SHOP E STATE. IT S IN GREAT OVERALL SHAPE. PLEASE CHECK OUT OUR OTHER AUCTIONS THEY DON'T COME ALONG THIS NICE THAT OFTEN. THESE ITEMS ARE BEING OFFERED WITH NO RESERVE! THIS IS A GREAT CHANCE FOR ALL OUR BUYERS TO GET SOME OF THE BEST WE HAVE TO OFFER. MOST SITES WOULD LIST TH IS ITE M WITH A RESERVE TO START! THIS ITEM WOULD MAKE A GREAT GIFT OR ADDITION TO YOUR BUSINESS. TOP QUALITY& MADE TO LAST. SIMPLY THE BEST! SORRY NO INTERNATIONAL BIDDING ON THIS ITEM U.S. BIDDING ONLY PAYMENT POLICY ALL PAYMENTS MUST BE MADE WITH 7 DAYS OF AUCTION END ALL PAYMENTS MUST BE MADE BY PAYPAL WE RESERVE THE RIGHT TO RELIST ANY ITEM AFTER 7 DAYS OF AUCTION END THAT IS NOT PAID FOR SHIPPING POLICY ALL ITEMS ARE SHIPPED WITH 3 DAYS OF AUCTION END $ 4.99 WILL BE CHARGED FOR THIS ITEM NO COMBINED SHIPPING FREE COMBINED SHIPPING ON JEWELRY ITEMS ONLY UP TO 7 DAYS FROM FIRST PURCHASE NO COMBINED SHIPPING ON NON-JEWELRY ITEMS RETURN POLICY ALL RETURNS MUST BE MADE WITHIN 14
10pc pak, #83 (.0120) Re-sharpened Carbide Drll Bits
10pcs#83(0120) Re-sharpened Carbide Drill Bits. These micro drill bits are NOT DULL like some other auctions on Ebay. They have been resharpened to almost new quality by a Precision Repointing company that specializes in repointing only this type of drill bit. Protective Plastic case included! All the bits have a 1/8 shank great for CNC machines. Hand held motorized tools or drill presses. They have an aprox. overall lenght of 1 1/2" and all have the correct I.D. rings on them. All the bits have been ultrasonically cleaned to remove loose debris from the flutes. If you need tiny precision holes these are the bits you need. May different types of industries have purchased these sames bits from me. PCB drilling. CNC machining, Watch repair work, Carburator adjustments, Jewelry work, Rail Road modeling, Doll house building and the list ... morecan go on. I will ship USA and International! USA buyer pays shipping and handling cost of $5.50(USPS Priority) Canada buyers pay $8.00 for USPS First Class Mail International. All other In ternational buyers pay $9.95 for USPS First Class Mail International. Please view my other auctions.
1 1/2" (1.500") High Speed Steel Twist Drill With A #3 Morse Taper / Rust
Lighty used. A little rusty but that will go away one used. Extra long 9 1/2" flutes. 3 morse taper best of my knowledge. 15 1/2" overall length. Very expensive new!all offers considered.
HYDRAULIC PORT COUNTER BORES - High speed steel - Eclipse Mfg. Made in U.S.A.
Personal tools of Master Machinist Eclipse Tool# Tube dia. Tube# Thrd. Shank Dia. Condition 4051402 1/8 2 5/16-24 1/2 Used- Slight Modification 4051404 1/4 4 7/16-20 1/2 Used-Excellent Cond. 4051406 3/8 6 9/16-18 1/2" All 3 sets w/tap's included. Mil. Spec. 33649. F04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13e137fdf03-0xef-
13/16" Dia. DRILL BIT MORSE TAPER #3
13/16" dia. drill#3 morse taper length of cut 5" overall length 10" needs to be s harpened will combine shipping on multiple items if possible
TOOL BITS 4) MO-MAX 5/8" SQUARE OLD USED MACHINIST TOOLMAKER LATHE GRIND INSPECT
TOOLBITS(2) MO-MAX COBALT 5/8" SQUARE 4-1/2" LONG. USED AS PARALLELS NOT TOOLBITS! $43 EACH IF NEW! TOOLBIT(1) MO-MAX COBALT 3/4" SQUARE X 5" LONG. CHIPPED AS SHOWN BUT USED AS PARALLELS NOT TOOLBITS. $67 IF NEW. TOOLBIT(1) MO-MAX COBALT 1/2"X1"X8" TOOLBIT USED AS A PARALLEL! ENGRAVED AS SHOWN. $115 EACH IF NEW! ALMOST A $300 DOLLAR VALUE! FOR YOUR LATHE OR BRIDGEPORT OR FOR BENCH-WORK AS NEEDED. PREVIOUS OWNER USED THEM AS PARALLELS! THESE ARE MARKED"MO-MAC COBALT" ALL ARE IN GREAT USED AS PARALLELS SHAPE AS SHOWN! THANKS FOR LOOKING MANY MORE ITEMS LISTED AND MANY ON SALE! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple ... morepurchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price shipping for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us in the exact same condition as you received them(all accessories and boxes included as sent to you) Returns/exchanges must be received within 14 days of your winning bid. We are glad to refund any purchase but we are sorry there is a 15% restocking fee. Include your name. Address, item# daytime telephone# how you paid, and if you are requesting a refund or exchange. SEE OUR STORE! STARRETT 6" SCALE IS NOT INCLUDED. FEEDBACK: I leave feedback on all of my transactions once the transaction is complete. What this means is that when you have received your item and have left feedback stating that you are satisfied. I will then leave appropriate feedback finalizing th
4 Pc. long PTD #30 / .1285" Drill bits machinist aviation aircraft tool
MACHINIST/ AEROSPACE TOOLS 4 Pc. LOT PTD- PRECISION TWIST DRILL: 4- 30/ 1285" NOTE: THESE DRILL BITS WERE USED and ARE IN VERY GOOD USABLE CONDITION! A COUPLE HAVE MINOR SURFACE RUST ON THE SHANKS. THIS IS STRICTLY A COSMETIC ISSUE. NICE LOT/ NICE PRICE YOU WILL NOT BE DISAPPOINTED SQUARE IS FOR REF. ONLY PLEASE VISIT MY STORE! ALL OF MY ITEMS ARE PACKAGED AND SHIPPED WITH GREAT CARE! ALSO DELIVERY CONFIRMATION IS INCLUDED AND THE TRACKING# WILL BE UPLOADED TO EBAY AND PAYPAL FOR EASY ACCESSIBILITY! THANKS AND TAKE CARE! On Aug-27-10 at 18:58:39 PDT. Seller added the following information: HELLO! I COMBINE S/H ON MULTIPLE PURCHASES! PLEASE WAIT FOR A INVOICE WHEN PURCHASING MORE THAN ONE ITEM. THANKS FOR VISITING! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Nice Assortment Of 4 Kaiser Solid Carbide Boring Bars Great Shape
Been in Aerospace tool and die trade for over 25 years. Time to retire. Assorted lot of 4 Kaiser. Solid carbide boring bars. Lightly used. There is: 1) 615.212(1) 615.215, 1) 615.222, 1) 615.223. All are in excellent condition. If you have any questions, please ask. Thanks for looking. Posted with
Lot of 59 Pieces Machinist, Toolmaker, Drill Bits, Taps and Cutting Tools
Found in 1930's tool box. Lot of 59 Pieces of Machinists tool drill bits. Etc. Please look carefully at the pictures as I am unfamiliar with these parts and they are sold as is. Normal 0 MicrosoftInternetExplorer4 The two items on the far Left on last row are magnetic. Buyer will receive exact item shown and sold as is pictured. Item will be carefully packaged and shipped via USPS upon receipt of cleared Paypal payment. Please contact us with questions. Thank You!
HOUGEN ROTABROACH ANNULAR CUTTER BITS LOT OF 3 9/16" 1-1/4" 1-1/2"
HOUGEN ROTABROACH ANNULAR CUTTER BITS LOT OF 3 9/16" 1-1/4" 1-1/2" Click Photos to Enlarge Click to Enlarge Click to Enlarge Description Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 HOUGEN ROTABROACH ANNULAR CUTTER BITS Model: 12248. 12240, 12218(1) Hougen 12248- 1-1/2 X2 3/4 SHK HOUGEN HSS ANNULAR CTR(1) Hougen 12240- 1 1/4" Diameter. 2" Depth M2 High Speed Steel Cutter(1) Hougen 12218 9/16-Inch Diameter Rotabroach 2-Inch D.O.C. This lot appears to be in good used condition. Refer to pictures for details. New, this item would cost up to $165.00 each! Bid now& $ave! For other great deals on Construction Surplus items, Please check out our store! We are surplus equipment dealers with a wide range of products for sale. We are not experts in any particular item or category we advertise. ... moreWe do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best as we can. All statements and configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. We offer a 14 day money back or exchange– buyer pays return freight* Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in the pictures. Customer satisfaction is our top priority! E-mails will be answ
top notch boring & grooving tool with 9 inserts.l.h..
5/8"sq. shank x 4 1/4" long.clamp is worn were it holds insert.still works good. will combine shipping.
kennametal dropped head top notch grooving bar with 3 inserts.1 1/4" square x6"
with 3 new inserts.1@ 071 groove-1@ 1/8 wide radius.1 threader.holds# 3 top notch inserts.will combine shipping.
snap tap threading bar with 3 inserts. 1 1/4" square x6"
comes with 3 inserts.will combine shipping.
valenite cut off block & blade.
minimal use.very good cond.156 wide blade.3/16 wide insert.will combine shipping. 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13e3aff3571-0xf2-
Wildex Canada Large Indexable End Mill?? 15/16" Shaft, 1 3/8" Head Dia.,6" Long
Wildex XLBN 150 Canada Indexable End Mill. Dimensions shown in Title. First. Let me say that you probably know a lot more about what I'm selling than I do. I will be listing many machinist tools over the next few days so please check my other items. I am not a machinist and might not have some of the descriptions correct. These tools were purchased from an estate along with other tools that I could use, as I am a woodworker. They are pretty much as I found them. I'm hoping the pictures will help describe them to you. Please ask questions as I probably won't be trying to explain condition etc. for things I'm not familiar with. I'll ship by USPS or UPS whichever you prefer. I don't add any cost for time and packing materials. Just my actual shipping cost. I'll be happy to combine shipping to save you shipping costs. ... moreCheck my feedback as a seller over the last several years to see that I am an honest seller. Doing this a hobby. Although I don't usually accept returns, if you're not satisfied with any item please contact me and I will work things out to your satisfaction!
kennametal dropped head top notch grooving bar with 7 inserts.1 " square x5"
with 7 new inserts.2@ 195 groove-5 threaders.holds# 3 top notch inserts.will combine shipping.
LIGHTLY USED CARBOLOY TURNING TOOL HOLDER TROON 23-2 with INSERTS (RCMT)
LISTING IS FOR A USED TURNING TOOL HOLDER BRAND- CA RBOLOY STYLE- TROON 23-2 SHANK- 218" x.750" OAL- 4.00" USES INSERTS- RCMT(10 INSERTS ARE INCLUDED) CONDITION- LIGHTLY USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL ... moreAS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PL
Assorted SANDVIK Made in Sweden, Vintage Machinist Lathe Cutting Tools
Great Estate Sale find. Set of 5 assorted Sandvik Machinist Lathe Cutting tools made in Sweden. 5 pieces. Do not know a thing about them. If you need measurements. Etc. Email me. See photo. High bidder will pay by Pay Pal only. And add $5.50 for US Priority shipping. All items pictured as described. And sold"AS IS" There are no refunds.
48 CARBIDE TIP TIPPED CUTTING TOOL BITS LATHE NEW & USED MACHINIST TOOLS *2
48 CARBIDE TIP TIPPED CUTTING TOOL BITS LATHE NEW& USED MACHINIST TOOLS Condition/I n fo: This lot has new and used too bits. Some are still in sealed bags from MSC. All my tool auctions come with satisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Auctions must close within the same week for combined shipping. Notify me when you are done bidding and wait for me to send you an invoice. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to ... morehave your shipment insured. Check out my other items! Be sure to add me to your favorites list! Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
brazed carbide lot of (10) lathe tool bits machinist
10 bits-4) 4"x 3/4"x 1-1/8"2) 4-1/2"x 3/4"x 3/4"4) 3-1/2"x 5/8"x 5/8" RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13e3b5ed538-0xf8-
E-Z BURR DEBURRING KIT-BH-061 IN NEW CONDITION
E-Z BURR DEBURRING KIT-BH-061 IN NEW CONDITION ONLY USED A FEW TIMES
CARBOLOY TOOL BITS (4)
CARBOLOY TOOL BITS(4) AL-8 78B- 370 AR-8) 883 AR-8) AL-8 78B- RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13e3ca887aa-0x100-
19 HHS Mini Lathe 5/16" Bits Sherline Taig Machinist Gunsmith Tool lot
This auction is for a lot of 19 mini lathe cutter bits in 5/16" shank. Makers: Rex aa. Rex aaa, M2, Mohawk Extra, some are not marked Many bits have custom cutting profiles ground into them Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show auction items from different angles and next to a ruler to indicate size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
31 (17 new) Old Stock Machinist Lathe Cutting Milling Tool Bits most is 3/8"
31(17 new) Old Stock Machinist Lathe Cutting Milling Tool Bits most is 3/8" Personal machinist tool collection of 75 year old man from Cumberland. Maryland. He worked at the Celanese Corporation and Allegany Instrument Company. His tools/books will be sold in approximately 80 listings over the next week. All auctions will be 10 days, starting at $4.99 and NO Reserve! Please check them all out. This auction is for 31 vintage machinist's lathe cutting tools. This old machinist had a pile of them. I would imagine this is the good ole steel. Hardened, high speed, etc. Different tips and sizes, 17 pieces of stock are new. All but 6 are 3/8" x 3/8" x various lengths. 6 are 1/4" x 1/4" There is 3 pounds worth. As you can see. Used, re-sharpened, different sizes and tips, different brand names, looks like good stock. ... moreYou guys know more about it than me. Please look at all pictures for best description and condition and contact me with any questions through the eBay system. Thanks for stopping by and Godspeed! I accept payment by PayPal. Please checkout using the eBay system. Cash is fine on items picked up. Any problems at all email me through the eBay system. Shipping Costs are OUT OF CONTROL and out of my control. If cost looks high. Please make sure you look at shipping details for other options. Also, make sure you enter your correct zip code into the shipping calculator. For shippable items I will offer USPS Priority, First Class, Parcel Post, Media, and UPS Ground. Some items will be"Standard" shipping and I will choose one of the methods based on the size and weight of the item and your location(I am on the east coast, about 3,000 miles from the west coast) As of January 1, 2013 I have shipped 6,000+ packages worldwide. I do not and have never over-charged for shipping. If the costs does not look right, email me with your zip code and I will check it out. My classes on s/h cost for eBay Sellers is FREE! I almost always ship the next day of cleared payment. Not when you bought
MILWAUKEE 49-57-8058 11/16" ANNULAR CUTTER w/CENTER PUNCH
MILWAUKEE 49-57-8058 11/16" ANNULAR CUTTER w/CENTER PUNCH USED IN GOOD CONDITION
10pc pak, #79 (.0145) Re-sharpened Carbide Drill Bits
These are#79(0145) Re-sharpened Carbide Drill Bits. These micro drill bits are NOT DULL like some other auctions on Ebay. They have been resharpened to almost new quality by a Precision Repointing company that specializes in repointing only this type of drill bit. Protective Plastic case included! All the bits have a 1/8 shank great for CNC machines. Hand held motorized tools or drill presses. They have an aprox. overall lenght of 1 1/2" and all have the correct I.D. rings on them. All the bits have been ultrasonically cleaned to remove loose debris from the flutes. If you need tiny precision holes these are the bits you need. May different types of industries have purchased these sames bits from me. PCB drilling. CNC machining, Watch repair work, Carburator adjustments, Jewelry work, Rail Road modeling, Doll house building and the list ... morecan go on. I will ship USA and International! USA buyer pays shipping and handling cost of $5.50(USPS Priority) Canada buyers pay $8.00 for USPS First Class Mail International. All other In ternational buyers pay $9.95 for USPS First Class Mail International. Please view my other auctions.
10pc pak, #56 (.0465) Re-sharpened Carbide Drill Bits
These are#56(0465) Re-sharpened Carbide Drill Bits. These micro drill bits are NOT DULL like some other auctions on Ebay. They have been resharpened to almost new quality by a Precision Repointing company that specializes in repointing only this type of drill bit. Protective Plastic case included! All the bits have a 1/8 shank great for CNC machines. Hand held motorized tools or drill presses. They have an aprox. overall lenght of 1 1/2" and all have the correct I.D. rings on them. All the bits have been ultrasonically cleaned to remove loose debris from the flutes. If you need tiny precision holes these are the bits you need. May different types of industries have purchased these sames bits from me. PCB drilling. CNC machining, Watch repair work, Carburator adjustments, Jewelry work, Rail Road modeling, Doll house building and the list ... morecan go on. I will ship USA and International! USA buyer pays shipping and handling cost of $5.50(USPS Priority) Canada buyers pay $8.00 for USPS First Class Mail International. All other In ternational buyers pay $9.95 for USPS First Class Mail International. Please view my other auctions.
Cleveland Twist Drill Index Set METRIC 1MM -13MM 20 pcs
Cleveland Twist Drill Index Set METRIC 1MM-13MM about 20 pcs(or more) Some of the drills are new and others are used. As shown in pictures. The complete tool set contains 25 pieces but this set came incomplete and at least have 20 drills in it. COMBINE SHIPPING. If you want to buy more of our store items please do so and request an invoice before paying as we combine shipping. QUALITY GUARANTEE: We inspect and test all items that come into our shop. However. We deal with a large variety of items and our knowledge of some items is quite limited. Because of this we offer a 48 hour inspection period on all items that we sell. If you happen to find a problem with your item that we missed, please let us know within 48 hours of delivery. We will repair the item or refund your money if there is a problem that we cannot fix. Good customer service ... moreis our only goal. Please let us know immediately if there is a problem with your item. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Please note that we are not related with any of the companies that manufacture the products that we sale therefore if you have any questions regarding our products you can contact us directly. On Apr-27-13 at 14:28:21 PDT. Seller added the following information:
Heavy duty Hss tool bits 1"x1" various lengths
Up for bid today are these Heavy duty Hss tool bits 1"x1" various lengths.
1589. Five 3/8 Inch Boring Bars Lathe Flycutter 4 1/2"long Carbide Tipped
These are five 3/8 inch boring bars. Three of them are four inches long. Two of them are five inches long. They are in good usable condition. They appear to have been made for a cut off tool but we have used them for boring bars and as flycutter tools. They have all been sharpened and dipped in a plastic to protect them. The front of the carbide is wider than the rest of the tool so this gives them the correct clearance for them to be used as boring bars or flycutter or lathe bit. I do not leave feed back until the buyer leaves feed back. If you have a problem contact me. I have always been able to work something out. I try to give a fair description and take plenty of pictures so you can have confidence in what you are buying. When used items are being sold. Be aware that normal wear and tear will be present. If there are any major flaws, ... moredamage, or defects we will try to accurately describe such or have pictures showing it. But if you have any questions about any items feel free to e-mail me. I ask for 3 days for shipping but usually ship the day after I receive payment. Sometimes the same day. If you are bidding on more than one of my items and want to wait to see if you get the last item before you pay just let me know. That way you can save on the shipping and postage as I'll pack it all in one package and then send you the invoice for it all. If the postage price quoted by Ebay is one dollar or more over than the actual postage cost we will refund the difference. If there is anything else that I can help you with don't hesitate to ask. Powered by The free listing tool. List your items fast and easy and manage your active items.
Guhring Jobbers Drill,3FL,33/64,13.1MM.Solid Carbide High Precision 150Deg Point
For auction Guhring used 3 flute solid carbide titanium coated high precision straight shank 33/64. 13.1 mm =.5157 diameter jobber drill. oal=4" flute length =2" Drill has been used in cnc machine drill point look as new but along cutting sides of flutes there is visable chipping that can be seen in pictures that show as black spots this should not be problem for most drilling work. Thanks for looking. WILL ONLY SHIP TO USA See my other items will combine shipping Guhring Carbide Drills- GS200 GS200 U The GS200 three-flute carbide drill provides a reamer class finish in a high penetration rate design. Three flutes give added support in the cut for an accurate hole location and exceptional surface finish. A 150º point angle helps eliminate exit burrs in many applications and the three flute construction is an advantage when ... morebreaking thru on angled exit surfaces. The GS200 U is a universal design that does not require a pre-spot drilling operation. Available in bright and TiN coated versions as stocked items.
circle 1" shank boring bar,with 4 inserts.coolant thru.
looks like its only been used once.excellent cond. will combine shipping.
vintage Mayhew milling bit cutting fabrication 3022 1/2 USA tool metal working
Here is a vintage bit I do not know much about it but looks to me to be a milling bit of some sort. The shank does have a little surface rust. I have this marked used but I am not sure it ever was used but it is pre owned. The bit is marked Mayhew made in USA 3022 1/2. The square part on the shank does measure approximately 1/2 inch the tip of the cutting end measures approximately 3/4 inch and this is approximately 7 inches in total length.This looks to be in great condition and a very solid well made tool.This does say made in USA and looks to be from a time when that just being marked USA meant it was a quality tool.Please feel free to ask any questions. I only accept paypal.Will usually ship within two business days after receiving cleared payment.Ship only to the 50 United States.You must have a mailing address in the states.Please pay ... morewithin 3 days after auction ends.I will leave feedback after you are satisfied with item.I do my best to honestly accurately and clearly describe all items.All items"as is"If you have any further questions please do not hesitate to ask
Lot of 14 Machinist Tools Lathe Mill Bur Rotary File Bits Grumman Aviation
These are part of my grandfathers tool collection as he was a machinist for Grumman Aerospace from the 1940's till about 1970.All the tools are considered used as I have no idea whether or not they are used or new. Powered by The free listing tool. List your items fast and easy and manage your active items. 2fiuqm.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bifc%3E2fiuqm-13e5614e012-0xf8-
Kaiser Thinbit Tool Holder 3/8 Shank
Kaiser Tool Co. Thinbit tool holder. I can find no model or part number on this. But someone has etched"small" on the side. In very good condition, with only one tiny nick on the reverse side(opposite the cutter side) Made in the USA. Measures 4-3/8" long overall. The insert in it is 1/4" height and about 7/16" long. Holding it up to a straight edge. It looks to be 1/16" thick. Pretty sure it is a carbide insert.
Lathe Carbide Tipped Tool Bits (5) 1/2" x 1/2" Shank Sharp Tools, Good Condition
For your consideration are these(5) Lathe Carbide Tipped Tool Bits. 1/2" x 1/2" Shank Turning Tools. Made in the U.S.A. Sandvik. Carboloy, Armide. Bits are sharp. Tools are in good used working condition. Please take a look at my other Ebay Stores. I have a lot of nice items listed there. MB9. 3-3198- 2 International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. By purchasing this item the buyer accepts all responsibility for any accident. Injury or, property damage to himself or other people resulting from the use, abuse or misuse of this item. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13e62e3c25f-0x100-
lathe tool lot male/female radii shop made in the 40 s-50s see pix
shop made years ago from automatic screw machine circular toos for female and tool steel for the male tools with posts see tool holder for tool posts it is 1/2 x 1 x 5 circular tools are mouted via the threaded or thru hole id i lost the list of sizes years ago 7# bare weight plus $1.00 handling will ship in pm sfrbox if they fit or buyers choice please feel free to ask questions
LOT OF PRECISION HSS TOOL BITS
aims LOT OF PRECISION HSS TOOL BITS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Lot of HSS tool bits in good condition. Specifications: Shanks: 5/16" x 5/16" 3/8" x 1/2" 3/8" x 3/8" Overall Length: 1-1/2" to 4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOT OF PRECISION HSS TOOL BITS Reliable Tool Inc. c 2011 | Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e66e3cfba-0x104-
20 Cobalt Alloy 3/8" Mini Lathe Bits Sherline Taig Machinist Gunsmith Tools Lot
Ebay Base This auction is for 20 cobalt alloy lathe cutter bits in 3/8" shank. These high quality bits are Rex95& RexAAA made by Crucible. Circle C by Firth Sterling. Mo-Max Cobalt by Cleveland Twist Drill. All the bits have custom cutting profiles ground into them. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
10 Solid Carbide Boring Bars 3/8 Lathe Bits Machinist Gunsmith Milling Tools Lot
Ebay Base This auction is for 10 solid tungsten carbide boring bar Lathe bits in 3/8" shank. Most are sharp and ready to use. one or two might need light dressing before use. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb%3A%60%3E-13e670a607d-0xfb-
MACHINISTS LARGE SIZE USED BITS - LOT OF 6 -- FREE SHIP IN USA
MACHINISTS LOT A COUPLE UNUSUAL SIZE& SHAPE UNTOUCHED UNCLEANED PLEASE USE PHOTOS YOU RECEIVE ALL 6 BITS AS PICTURED $19.99 START.NO RESERVE. FREE SHIP IN USA!
lathe carbid tool bits
Up for BID 15 used cemented carbid tool bits 5/8 size 5 AR- 10 bits. 3 AR- 12 bits, 1 C- 10 and 1 C- 49 and 5 assorted grades. please let me know if more information is needed. thank you.
5 Tungsten Carbide Lathe Bits Hardinge Special 3/8
5 Tungsten Carbide Lathe Bits 3/8 x 2 1/5” new and used the bits all some rust and dirt from storage item# 2) TF 37. ILT37S, C-14537, ERT-37, RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13e670a6162-0x102-
FMT COBALT 13/16X1" ANNULAR CUTTER
~~~ NO RESERVE ~~~ ~~~ FREE SHIPPING ~~~ FMT COBALT 13/16X1" ANNULAR CUTTER The tool is previously owned and does show signs of being used and is in good working condition! All items included in the auction are depicted in the photographs provided. If you are the winning bidder please include your phone number on your PayPal payment so we can contact you directly with any questions regarding shipping. Thank you& happy bidding! This auction includes everything pictured unless mentioned otherwise- ¦: ¦: Another great auction from BIXBYSALES15210! ¦: ¦: CHECK OUT OUR FEEDBACK AND BID WITH CONFIDENCE. THANK YOU. Please do not hesitate to send me an email. A message through eBay, or give me a call@ 918-366-6000: M-F 10am-5pm central) with any questions you may have about this, or any of my other auctions! NORMAL OFFICE ... moreHOURS(CENTRAL TIME ZONE) MON-FRI 9- 5:30. SAT 10- 4:30 WE ARE NOT OPEN MOST FEDERAL HOLIDAYS. WE ARE NOT OPEN ON SUN. PLEASE ALLOW 24- 48 HOURS FOR EMAIL RESPONSE. International Shoppers Due to Paypal’s reluctance to accept any form of international shipping tracking confirmation numbers we can not at this time ship outside the United States! Payment PAYMENTS MUST BE MADE BY PAYPAL OR IN PERSON WITHIN 1 WEEK UNLESS ARRANGEMENTS ARE MADE BEFORE THE CLOSE OF THE AUCTION. IF IT WILL TAKE YOU LONGER THAN ONE WEEK TO PAY PLEASE CONTACT US BEFORE YOU BID! Local Pickup LOCAL PICKUPS ARE ALWAYS ALLOWED. BUT DON'T FORGET IF YOU PICK IT UP IN PERSON THERE WILL BE SALES TAX! OKLAHOMA 8.517% Shipping BIXBYSALES15210 ships using a professional packaging and shipping company! They handle all aspects of the items shipment including packing. Tracking, and any shipping damage claims. The shipping company retains the right to ship by whatever means deemed necessary to get your item to you safely! Standard shipment times will be 4 days from date of payment with many items shipped sooner. If you are the winning bidder please include your phone number on your paypal payment so w
CUT OFF TOOL FOR B & S. SCREW MACHINE. .100 WITH. I.D.=3/4
CUT OFF TOOL FOR B& S. SCREW MACHINE. 100 WITH. I.D.=3/4
MILLING CUTTING BITS, ROUTER, SET OF FIFTEEN HSS PIECES ROEBUCK AND DORMER HSS.
MILLING OR ROUTER CUTTING BITS. SET OF FIFTEEN HSS PIECES. ROEBUCK AND DORMER HSS. THREADED SHANK END. GOOD QUALITY CUTTING LIFE IN BITS. ROEBUCK SIZES 10mm 020174 9.5mm 020173 9.0mm 020172 8.5mm 020171 8.0mm 020170 7.5mm 020169 7.0mm 020168 6.5mm 020167 6.0mm 020166 5.5mm 020165 4.5mm 020163 DORMER SIZES. 5.0mm C141 4.0mm C141 3.5mm C141 2.5mm C141 MORE ITEMS LISTED, MORE ITEMS BEING LISTED. AIM TO DISPATCH NEXT WORKING DAY, WHEN PAYMENT RECEIVED.
Ingersoll TGFPR 25.4-4 Face Grooving Indexable Tool Holder
Ingersoll TGFPR25.4-4 Turn Line T Clamp Ultra Plus Face Grooving Lathe Tool. Indexable and holds inserts from 2mm, 3mm and 4mm wide. This tool ran a tool test and was then put back in the salesmans trunk stock so the only marks on the tool body are the lines were the cnc clamped on it. List Price is $133.00 EDP Designation Insert Seat Size H(inch) B(inch) L(inch) F(inch) E(inch) Tmax(inch) Dmin(inch) 2830032, TGFPR25.4-4, 2. 3, 4, 1.000, 1, 6.00, 0.87, 0.189, 2.36. ING 2830032. Check out my! Be sure to add me to your! We have partnered with a large Manufacturing Company and have many items not yet listed, Be sure to add us to your favorites to see many more surplus items in the near future. At Red Earth Tool we photograph each item so what you see is what you get. Also we will combine shipping on items, However PLEASE DO NOT PAY PRIOR TO ... moreSHIPPING CHARGE ADJUSTMENTS. As once you pay we cannot correct shipping charges. All sales are shipped USPS or UPS and rates are continental United States Only but most other carriers can be used at the buyer’s request. Although shipping charges will be adjusted accordingly. Most items paid for by 11:00 am Monday through Friday ship same day. Holidays excluded, all others ship next business day(Saturdays& Sundays excluded) Oklahoma Residents add 8.725% sales tax. Anything sold outside the USA does not include Taxes. Tariffs or international shipping charges, all additional costs are the sole responsibility of the buyer and will not be incurred by Red Earth Tool. We try to be perfect in our descriptions but some errors do occur. If you see one please do not assume and ask questions. We will respond to your questions quickly and correct the listing so that your experience is a positive one. All items listed are sold in“AS-IS” condition. No warranty. Expressed or implied, applies to any items listed for sale by this eBay seller. We will do our best to answer all questions in a prompt and thorough manner in the order they are received. All items will be carefully
5 USED CLEVELAND MO MAX TOOL BITS 1/2" SQUARE COBALT 1336
YOU ARE BIDDING ON 5 USED CLEVELAND MO MAX TOOL BITS 1/2" SQUARE COBALT THE OTHER ENDS ARE NEW AND BEVELED DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items. 1t.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13e789bcd59-0xf5-
SNAP ON MATCO AND MAC TOOLS LOT CARBIDE BURR SET PRY BARS DEAD BLOW HAMMERS
SNAP ON MATCO AND MAC TOOLS LOT CARBIDE BURR SET PRY BARS DEAD BLOW HAMMERS UP FOR AUCTION IS A. LOT OF WELDING TOOLS(SEE BELOW) CONDITION: PRE-OWNED. SHOW NORMAL USAGE, VERY GOOD SHAPE INCLUDES: SNAP ON SPBS18 18" ORANGE HANDLE STRIKING PRY BAR SNAP ON SPBS24 24" ORANGE HANDLE STRIKING PRY BAR MAC TOOLS CH24DFB 24 OZ DUAL FACE DEAD BLOW HAMMER MAC TOOLS CH5CDS 28 OZ DEAD BLOW HAMMER SNAP ON CTS561CLG CORDLESS SCREWDRIVER SNAP ON CTLED566 FLASHLIGHT SNAP ON CTC 572 BATTERY CHARGER MAC TOOLS CB4S CARBIDE BURR SET 2 MATCO TOOLS MAGNETS THANK YOU FREE SHIPPING! STATES 5 DAY HANDLING TIME. 99% ARE SHIPPED WITHIN 2 BUSINESS DAYS PLEASE BID WITH CONFIDENCE AS OUR 100% FEEDBACK WILL ASSURE YOU! ABOUT US: WE ARE NEW TO THE EBAY COMMUNITY. OFFERING A VARITY OF PRODUCTS! FROM JEWELRY TO POWER TOOLS! EVERY WEEK WILL BE DIFFERENT! SO MAKE SURE ... moreYOU COME BACK AND CHECK US OUT! YOU WON'T BE DISAPPOINTED! RETURN POLICY: WE DO HAVE A RETURN POLICY OF 14 DAYS. IF YOU ARE NOT SATISFIED IN ANY WAY. YOU CAN RETURN YOUR ITEM FOR A FULL REFUND. ALL WE ASK IS THAT YOU LET US KNOW WHY YOU ARE RETURNING THE ITEM AND GIVE US THE OPPORTUNITY TO RESOLVE ANY ISSUES BEFORE OPENING A CASE OR LEAVING NEGATIVE FEEDBACK AND ANYTHING LESS THAN A 5 STAR RATING. EBAY DOES PENALIZE SELLERS FOR ANYTHING LESS THAN A 5 STAR RATING. WE WILL WORK WITH YOU IN EVERY WAY POSSIBLE TO INSURE YOU'RE TRANSACTION WITH US IS AS HONEST AND PLEASANT AS POSSIBLE. EMAILS: IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL US AND WE WILL GET BACK TO YOU WITH IN 24 HOURS. YOU ARE VERY IMPORTANT TO US. HOWEVER WE ARE CLOSED ON THE WEEKENDS AND HOLIDAYS, PLEASE ALLOW ADDITIONAL TIME FOR A RESPONSE DURING THOSE HOURS. THANK YOU AND HAPPY BIDDING! 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-13e78f27d2d-0xfd-
5 Refurbished Groove Lathe Bits 1/2" x 1/2" x 3" Offset Carbide Tip made USA
you are bidding on. 5 Refurbished Groove Cobalt Steel lathe Bits. Size is 1/2" x 1/2" x 3" long. The cutting tips are.1562" 5/32" in width. All 5 bits are the same. They are offset with new Carbide Tips Buyer pays $5.50 for shipping.
18 Cobalt HS Mini Lathe 3/8" Bits Sherline Taig Machinist Gunsmith Tool Lot
T his auction is for a lot of 18 mini lathe cutter bits in 3/8" shank. Makers: Rex aaa. Vasco Supreme, circle C, and others most bits have custom cutting profiles ground into them. One bit is carbide tipped Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show items from different sides and angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
8 Tungsten Carbide Lathe Bits 1/2” x3 1/2 S4 Uddenholm Swedish
8 Tungsten Carbide Lathe Bits 1/2 x3 1/2” S4 made in Sweden by uddenholm new and used the bits all have some rust and dirt from storage
4 Tungsten Carbide Lathe Bits 3/4 G5 Sheffield England
4 Tungsten Carbide Lathe Bits 3/4 x5 1/2” G5 made in Sheffield England new and used the bits all some rust and dirt from storage
5 Tungsten Carbide Lathe Bits 5/8 G5 Sheffield England
5 Tungsten Carbide Lathe Bits 5/8 x5” G5 made in Sheffield England new and used the bits all some rust and dirt from storage
Accupro boring bar bore bar solid carbide .360x.750x3/8 MSC p#05253406
Accupro solid carbide boring bar.360" min. I.D. 750" depth 3/8" shank 2-1/2" O.A.L. Slight wear.
LOT OF TAPER SHANK LATHE DRILL BITS WITH GOOD SHARP EDGE MACHINIST
This Sale is for A LOT of: LOT OF(6) TAPER SHANK LATHE DRILL BITS WITH GOOD SHARP EDGES. Very sharp! PLEASE NOTE: THE SCALE THAT IS IN THE PICTURES IS FOR REFERENCE ONLY AND IS NOT PART OF AUCTION. Please check my other items/ auctions because I will be selling more machinist tools. Bits, calipers, etc. California residents but sales tax of 8% will be applied at time of check out. Sorry. Please note that I am not a machinist so unfortunately. I can't answer any questions regarding this auction. Please check our Feedback. We STRIVE for 100% feedback. That is why we always take the extra time and care to make sure YOUR item is packaged safely then shipped quickly! Sorry. NO International sales. We only ship within The USA. Buyer shall be responsible to add APPROPRIATE insurance fees to payment if so desired. Payment shall be done only through ... morePayPal. Payment shall be done immediately after auction has ended. Some boxes may have inked out markings, wrinkl es. Flaps missing, etc, if so, it is reflected in our very low prices. We always ship your item promptly after your payment has been confirmed by PayPal.
Milling machine, Machinist Vintage Surface Gage Gauge for mill milling lathe
This Sale is for a: Vintage Milling Machine. Machinist Surface Gage. Please check my other items/ auctions because I will be selling more machinist tools. Bits, calipers, etc. California residents but sales tax of 8% will be applied at time of check out. Sorry. Please note that I am not a machinist so unfortunately. I can't answer any questions regarding this auction. Please check our Feedback. We STRIVE for 100% feedback. That is why we always take the extra time and care to make sure YOUR item is packaged safely then shipped quickly! Sorry. NO International sales. We only ship within The USA. Buyer shall be responsible to add APPROPRIATE insurance fees to payment if so desired. Payment shall be done only through PayPal. Payment shall be done immediately after auction has ended. Some boxes may have inked out markings, wrinkl es. Flaps ... moremissing, etc, if so, it is reflected in our very low prices. We always ship your item promptly after your payment has been confirmed by PayPal.
LOT OF 20 TOTAL LATHE TOOL BITS SOME CARBIDE SOUTH BEND ATLAS CRAFTSMAN LOGAN
LOT OF 20 TOTAL LATHE TOOL BITS SOME CARBIDE SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I DO SHIP INTERNATIONALLY I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is 100% and I aim to keep it that way by WORKING WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE ... moreOF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY OTHER LISTINGS
17 Cobalt Alloy 5/16" Mini Lathe Bits Sherline Taig Machinist Lot Gunsmith Tools
Ebay Base This auction is for 17 cobalt alloy mini lathe cutter bits in 5/16" shank. These High quality bits are Rex 95& Rex AA made by Crucible. Mo-Max Cobalt made by Cleveland twist drill. Crusader by Chicago Latrobe. All the bits have custom cutting profiles ground into them. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
MACHINIST TOOL LATHE MILL*KEO HIGHSPEED KEY SEAT CUTTERS LOT OF 4* 60-61, 806-91
UP FOR AUCTION MACHINIST TOOLS& PARTS KEO HIGH SPEED KEY SEAT CUTTERS· LOT OF 4. 2 ARE NEW IN BOX· 2 USED BUT IN GOOD CONDITION· 605-61& 806-91* PLEASE REFER TO ALL PICTURES TO SEE CONDITION* SOME MINOR SCRATCHES FROM USE. IN GOOD CONDITION. PLEASE REFER TO ALL PICTURES TO SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE* Being SOLD AS IS– Do not know much about machinist tools but will try to describe as best I can. I am in the learning process. So any feedback will be appreciated. No RETURNS. I will combine shipping for more than one purchase. Please look at our other listings. We have a large array of machinist tools up for auction. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS ... moreAND WILL TRY TO WORK WITH YOU AS BEST I CAN. SERIOUS INQURIES ONLY. Please wait until auction has ended and invoice has been received to confirm all costs to buyer.
Lot of Used Assorted Drill Bits Over 3 lbs in Lot
Lot of used drill bits Please ask questions before bidding
Lathe HSS Tool Steel Cutting Bits Lot 3 pcs Mo-Max 1/4" & Haynes Stellite & misc
Up for auction is a Lot of 3 used cutting tools. They are: Mo-Max Cobalt 1/4 Cleveland USA. Measure 2 1/2" long Haynes Stellite Alloy 98-M2-6-51 measures 3 1/16" long. One small chip on square end. plus one misc cutting tool. Unmarked measures 5" long, some corrosion, scratches and signs of age/use. Please read this entire auction for everything needed to place your bid with confidence. With a reputable seller. PAYMENT. An invoice will be sent by ebay directly after auction is completed. I only accept Pay Pal. SHIPPING. I will combine items when possible to save you money on postage. Shipping charges are for postage and items will be sent in secure packaging. I mainly ship via USPS and will ship via UPS only if requested. You may also pick up items. Please contact. Me by email to make those arrangements if possible. All items ... moreship with confirmation(on domestic shipments only) THE AUCTION. If you have any questions about what is being sold. Please feel free to e-mail me& I will try and return an answer as soon as possible. Payment must be received within 7 days of end of auction. Or sale may be void and item will be relisted. Thanks for looking and good luck bidding! Also don’t forget to check out our many other diverse items for sale.
Repair Plug Cutter Set
These are used but still in good shapePlug Cutters are Carbide Tipped- 1/2" Shank DiameterThe bevel bit cuts a tapered hole in the surface to be repaired; for example. A deep gouge in the countertop, or a faucet hole that has been drilled in the wrong location. The 3-flute plug cutter cuts the corresponding tapered plug; that when finished, will give virtually undetectable repair. Effective for repairs 1-3/4" in diameter. Posted with
2 Count Lot of MO MAX High Speed 3/16 Tool Bit FREE US Shipping!
Description Thank you for viewing my listing. You're considering a 2 count lot of very good used Mo Max High Speed 3/16 curved cutting tool bits Plenty of life left in both and shipping is FREE! Be Sure To Check Out My EBAY Store for hundreds of other great items! Payment via Paypal and credit cards(through paypal) and due within 5 days of auctions end. Fantastic"buy it now" price! Secure USPS First Class shipping with delivery confirmation is FREE! International shipping is $9.95) 14 day money back guarantee!
FASTENAL FMT 1-7/8" DIAMETER 1" DEPTH ANNULAR CUTTER #0308361
FASTENAL FMT 1-7/8" DIAMETER 1" DEPTH ANNULAR CUTTER#0308361 Click Images to Enlarge Item Description Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 FASTENAL FMT 1-7/8" X 1" ANNULAR CUTTER Model: 0308361 1-7/8" High Speed Steel Annular Cutter 1" depth Each unit appears to be in great unused condition. Refer to pictures for details. Retail. This unit would cost over $140.00 each! You are purchasing one per order. However, more are available for immediate purchase! For other great deals on Construction Surplus items, Please check out our store! Chekc out our and our! We are surplus equipment dealers with a wide range of products for sale. We are not experts in any particular item or category we advertise. We do not have the ability or expertise to test equipment for functionality beyond ... moreplugging it in and describing what we observe as best as we can. All statements and configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in the pictures. Customer satisfaction is our top priority! E-mails will be answered as promptly as possible during business hours. However, please f eel free to call us at 1-800-800-6011. We are open Monday- Friday. 8 to 5 pm. We l
Vibro-Tool- Burgess- Crafts-Wood Engraving-Leather Tooling
You are bidding on This vintage Vibro-Tool. This is in great working condition and as you can see from the pictures. All parts are included along with manual.It is in its original wooden case with clasp. Good Luck Bidding. THIS IS A NO RESERVE AUCTION! A shipping calculator is provided within the listing. If you will enter your zip code, it will tell you the exact shipping charge to your area. Please e-mail with any questions prior to bidding. If you would like additional pictures, please be as specific as possible as to what you would like to see. In order to guarantee the sale, contact must be established within 3 days and payment received within 7 days of auction close. If paid with a personal or business check, shipping will be delayed 10 days to allow the check to clear. If item is not as represented in the description, your full purchase ... moreprice will be refunded upon return of the item in the same condition as when sold. Check my other auctions and save money on combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. On May-05-13 at 18:28:04 PDT. Seller added the following information: Use the FREE Counters 1 million sellers do- Vendio! 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13e88b29885-0xf9-
Enco Lathe 4 way Turret Tool Post 3 1/2 Square 1/2" Tool Bit
Enco Lathe 4 way Turret Tool Post 3 1/2 Square 1/2" Tool Bit This item is in good used condition and fully functional. Will ship by USPS Priority Mail Medium Flat Rate Box and cost $12.35. Powered by SixBit's eCommerce Solution
Radius Cutting Tool Holder 3/8 tool Bit
Radius Cutting Tool Holder 3/8 tool Bit Tool holder is the size of a Armstrong No 2 tool holder 5/8 wide and 1 3/8 tall. 8" over all length. It is 3 1/4" from the bottom of the tool holder to the bottom of the cutting tool. When you turn the knob the tool bit rotates horizontally. Items have markings by previous owner. This item is in good used condition and fully functional. Will ship by USPS Priority Mail Medium Flat Rate Box and cost $12.35. Powered by SixBit's eCommerce Solution
VALENITE MCLPL-16-5 CP** 54* Turning Tool Holder Shelf Worn
Valenite ValTurn LOC-A-DEX MCLPL-16-5 Left Hand Turning with 1.0" Square Shankto to fit CP* 54* Series Inserts. This item looks new with very minor scratches from shelf wear and no marks where it was locked in to the lathe. PVAL MCLPL165. Check out my! Be sure to add me to your! We have partnered with a large Manufacturing Company and have many items not yet listed, Be sure to add us to your favorites to see many more surplus items in the near future. At Red Earth Tool we photograph each item so what you see is what you get. Also we will combine shipping on items, However PLEASE DO NOT PAY PRIOR TO SHIPPING CHARGE ADJUSTMENTS. As once you pay we cannot correct shipping charges. All sales are shipped USPS or UPS and rates are continental United States Only but most other carriers can be used at the buyer’s request. Although shipping charges ... morewill be adjusted accordingly. Most items paid for by 11:00 am Monday through Friday ship same day. Holidays excluded, all others ship next business day(Saturdays& Sundays excluded) Oklahoma Residents add 8.725% sales tax. Anything sold outside the USA does not include Taxes. Tariffs or international shipping charges, all additional costs are the sole responsibility of the buyer and will not be incurred by Red Earth Tool. We try to be perfect in our descriptions but some errors do occur. If you see one please do not assume and ask questions. We will respond to your questions quickly and correct the listing so that your experience is a positive one. All items listed are sold in“AS-IS” condition. No warranty. Expressed or implied, applies to any items listed for sale by this eBay seller. We will do our best to answer all questions in a prompt and thorough manner in the order they are received. All items will be carefully packaged and shipped in the manner specified. Our seller rating is very important to us; if you have any problems we will do our best to resolve the issue quickly and fairly. Please contact us with any issue that arises prior to leaving feedback. Thank
lathe tooling lot, tooling holder, inserts, counter sink drills
Up for auction is alot of tooling. Tool holders, bore bars and a ton of stuff. Its all for sale, everything you see is what you get. Most all tool holders have like new carbides/inserts" in them, the ones on the top right I searched and found they are around 83 bucks each just the holder. According to researching there is over $1,500.00 here. Depending on how you look at it. The bore bars well, as you see there are a few new ones and alot that are set up ready to go. All different sizes and assortments. Thanks and good luck bidding! Any questions please call. 715-820-2124 Craig
Cincinnati Milling Machine Co. cutters shaper tools Bridgeport 8 tools & holder
Cincinnati Milling Machine Co. various tool bits 8 pieces various size cutter with 5/8" shank with wooden holder stand(Same as Bridgeport shaper tools) Used Buyer pays shipping Accept Paypal or MO On Apr-14-13 at 12:17:43 PDT. Seller added the following information: Very similar to Bridgeport& other shaper cutters
5 CARBOLOY BRAZED CARBIDE-TIPPED TOOL BITS 370, C10
aims 5 CARBOLOY BRAZED CARBIDE-TIPPED TOOL BITS 370. C10 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Carboloy. Model# 370. C10 This is a lot of Unused Carbide Tipped Tool Bits. For general-purpose grooving. Turning, facing, chamfering. Specifications: Shank Size: 5/8" Tip Width: 3/16" O.A.L. 5" Comes as shown In pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large ... moreselection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals!Bidding starts at a dollar with no reserve. 5 CARBOLOY BRAZED CARBIDE-TIPPED TOOL BITS 370. C10 Reliable Tool Inc. c 2011 | Powered by
7 CARBOLOY BRAZED CARBIDE-TIPPED TOOL BITS 350, C8
aims 7 CARBOLOY BRAZED CARBIDE-TIPPED TOOL BITS 350. C8 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Carboloy. Model# 350. C8 This is a lot of Unused Carbide Tipped Tool Bits. For general-purpose grooving. Turning, facing, chamfering. Specifications: Shank Size: 1/2" Tip Width: 5/32" O.A.L. 3-1/2" Comes as shown In pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large ... moreselection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals!Bidding starts at a dollar with no reserve. 7 CARBOLOY BRAZED CARBIDE-TIPPED TOOL BITS 350. C8 Reliable Tool Inc. c 2011 | Powered by;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e8e47fe84-0x102-
15 Cobalt 1/4" Mini Lathe Tool Bits Sherline Taig Unimat Machinist Gunsmith Lot
Ebay Base This auction is for 15 Cobalt alloy HSS mini lathe bits in 1/4" shank. These high quality bits are Mo-Max Cobalt by Cleveland Twist Drill. Rex 95. Rex AA& Rex M-2 by Crucible. Vasco Supreme T-15 by Vanadium Alloys and others. Most are sharp and ready to use. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each picture shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
Roll Forged 1 1/2" High Speed Drill Bit - 11 1/2" in length
Roll Forged 1 1/2" High Speed Drill Bit 11 1/2" in length Republic USA I've listed this as used. But appears to never have been used. However, I am not 100% certain. It is in excellent condition. Please email with any questions. Thanks for looking.
Armstrong Cutting Tools, Tool Bits Box, 2307 5/8"
An old box for From Armstrong Cutting Tools- Tool Bits#2307. 5/8" Please view all pictures and ask any questions before bidding. Thank you
5/8" x 2.92" Stagger Tooth Milling Cutter - 1" Shank
5/8" x 2.92" Stagger Tooth Milling Cutter- 1" Shank Head Diameter OD- 2.92" Shank Diameter- 1" Overall length is about 6" I can't get the bolt loose to take the cutter off the shank to get the specifics of it. Used. Looks to be in pretty good condition- look at pictures to get an idea of condition for yourself. I picked this up with a bunch of other metal working tools at an auction. I will be listing the other parts/tools in the near future. I do not know anything about this type of tool or this industry but will try to answer all questions the best I can. Please do not assume anything about this part without asking first. You are getting the part pictured& listed in the title only. Nothing more. Check out my other items! Be sure to add me to your favorites list! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13e8e487a2f-0xfa-
1" x 3.88" Stagger Tooth Milling Cutter - 1 1/4" Shank
1" x 3.88" Stagger Tooth Milling Cutter- 1 1/4" Shank Head Diameter OD- 3.88" Shank Diameter- 1 1/4" Overall length is about 6" I can't get the allen bolt loose to take the cutter off the shank to get the specifics of it. Used. Looks to be in pretty good condition- look at pictures to get an idea of condition for yourself. I picked this up with a bunch of other metal working tools at an auction. I will be listing the other parts/tools in the near future. I do not know anything about this type of tool or this industry but will try to answer all questions the best I can. Please do not assume anything about this part without asking first. You are getting the part pictured& listed in the title only. Nothing more. Check out my other items! Be sure to add me to your favorites list!
UTD 1" x 1/2" HS-12 21A 10 Tooth Concave Cutter - 3 1/4" OD x 2 1/4"
UTD 1" x 1/2" HS-12 21A Concave Cutter- OD x 2 1/4" Head Diameter OD- 3 1/4" Head Diameter at bottom of cutting edge- 2 1/4" so each tooth cuts 1" wide and 1/2" deep) 1" ID on the head. Shank Diameter- 3/4" Used. Looks to be in pretty good condition-There is a couple small chips- look at pictures to get an idea of condition for yourself. I picked this up with a bunch of other metal working tools at an auction. I will be listing the other parts/tools in the near future. I do not know anything about this type of tool or this industry but will try to answer all questions the best I can. Please do not assume anything about this part without asking first. You are getting the part pictured& listed in the title only. Nothing more. Check out my other items! Be sure to add me to your favorites list! ... more336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13e8e487a3f-0xff-
Whitney Tool Company WTC M42 1 1/2" x 5/8" Staggered Tooth Cutter
Whitney Tool Company WTC M42 1 1/2" x 5/8" Staggered Tooth Cutter Model# LTS4840M42 Head Diameter OD- 1.5" Head Width- 5/8" Shank Diameter- 1" Used. Looks to be in pretty good condition- look at pictures to get an idea of condition for yourself. I picked this up with a bunch of other metal working tools at an auction. I will be listing the other parts/tools in the near future. I do not know anything about this type of tool or this industry but will try to answer all questions the best I can. Please do not assume anything about this part without asking first. You are getting the part pictured& listed in the title only. Nothing more. Check out my other items! Be sure to add me to your favorites list!
Advent 24/48 Pitch, 19 Tooth, Spline Mill Solid Carbide Tool 3/4" Shank
Advent 24/48 Pitch. 19 Tooth, Spline Mill Solid Carbide Tool 3/4" Shank. Aluminum Titanium Nitrite coating, 0.75" shank 1.5" long cut 4" overall length LOC: WH WO: 012188, Have stickers indicating"resharp+AlTiN recoat" Look unused. Sharp and defect free. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
TMFM 16/32 Pitch, 17 Teeth, 30 Deg. Spline Milling Solid Carbide Tool 3/4" Shank
TMFM 16/32 Pitch. 17 Teeth, 30 Deg. Spline Milling Solid Carbide Tool 3/4" Shank. Angle 30 degrees, Aluminum Titanium Nitrite coating, 0.75" shank 1.5" long cut 4" overall length LOC: WH WO: 014060, Have stickers indicating"resharp+TiAlN recoat" but look perfect. Sharp and defect free. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
HSS COBALT tool bits blanks vasco hypercut m42 vasco supreme m15 lot of (16)
16) bits- came out of a machine shop together in same box- 1/2 are marked to what grade of cobalt- the rest are for sure HSS- could be determined by rockwell test- 5)vasco hypercut. Is m42 cobalt( hss steel that can be hardened to rockwell 70) 1) vasco supreme- m15 cobalt-3) bits are marked with Sweden on them-and the rest are ground without makers mark-5 LBS& 2.2 ounces total weight of the 16 bits- sizes are marked on the bits in pics- $ scraping out at more than 65.00 in cobalt.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13e8e48969f-0xfb-
SGS CARBIDE MADE IN USA 2 FIBERGLASS ROUTER BITS #6M STYLE D & #5 STYLE D
2 ROUTER BITS FOR FIBERGLASS& COMPOSITE MATERIALS SGS MADE IN USA 73050#5 STYLE- D& 83051#6M STYLE-D EXCELLENT CONDITION.6M HARDLY LOOKS USED YOU RECEIVE THE ACTUAL BITS IN PHOTOS BOTH BITS. $19.99.FREE SHIP IN USA ESTATE FIND. IM NOT A MACHINIST BUT WILL ANSWER ANY QUESTIONS I CAN
Help