|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$6.75 Shipping Condition: New Location: China Type: Thread Pipe Fittings Connector. Model: Pipe Fittings Connector. 1Pcs Pipe Fittings Connector. Material: Brass. 1 Roll PTFE Tape.
Buy It Now
$5.52 Shipping Condition: Brand New Location: China Our Pipe is made of PVC. Plain/Solvent Weld PVC Pipe Fittings are designed with female socket connections for sliding over the ends of unthreaded male ... morepipes. 50mm pipe for a 50mm fitting. Spigots and bushes go inside a fitting, a 50mm spigot will go inside a 50mm fitting eg 50mm elbow.
Buy It Now
Free Shipping Condition: New Location: Freehold, United States Our 2 ft swivel tip foam gun gives you extended reach and the ability to get into spaces other guns can't. Built to last, the quality components and construction ... morewill keep on working when other guns fail.
Buy It Now
Free Shipping Condition: New Location: China For Gema Powder Coating injector pump IG02. 50 x venturi Insert sleeve. I will reply to help you within 24 hours. (Give us a trust and you are very satisfied.). ... more100% New and High Quality, In-Kind Shooting !
Buy It Now
Free Shipping Condition: New Location: Milwaukee, United States Precision Oiler Super Lube® Oil With PTFE (High Viscosity) 7ml, Lot of 12.
Buy It Now
Free Shipping Condition: New Location: 金东区, China OD 3/4 - 4 in 19mm - 102mm Sanitary Weld Ferrule + Tri Clamp + PTFE Gasket SS304. 89MM (3-1/2") 102MM (4") 3.5". 102MM (4") 115MM (4-1/2") 4". 1 PTFE ... moreGasket. 19MM(3/4") 50.5MM(2") 1.5". 1 Tri Clamp.
Buy It Now
$5.52 Shipping Condition: Brand New Location: China Our Pipe is made of PVC. Plain/Solvent Weld PVC Pipe Fittings are designed with female socket connections for sliding over the ends of unthreaded male ... morepipes. 25mm pipe for a 25mm fitting. Spigots and bushes go inside a fitting, a 25mm spigot will go inside a 25mm fitting eg 25mm elbow.
Buy It Now
Free Shipping Condition: New Location: Lakewood, United States The Paasche RG-3S is a double action gravity feed airbrush. Included with the airbrush are all three spray heads which allow the RG to be used for a wide ... morerange of airbrushing applications. A PTFE allows the RG to handle any water or solvent based paint.
Buy It Now
$5.52 Shipping Condition: Brand New Location: China Dark Grey PVC Imperial BSP Threaded Pipe Fittings. FBSP= Female BSP Threaded, MBSP= Male BSP Threaded. BSP Threaded fittings are threaded together using ... morePTFE tape. Various Sizes Imperial BSP Threaded Pressure Pipe and Fittings.
Buy It Now
$6.00 Shipping Condition: New Location: Westland, United States SAMES KREMLIN SEAL KIT PTFE GRAPH/FPM 6035757 106.335. Z3
Buy It Now
Free Shipping Condition: New Location: Hibbing, United States No. 304 stainless steel fittings are for potable water, under ground and irrigation systems, agricultural applications such as barns, or anywhere high ... morecorrosion resistance is an asset. Installing stainless steel fittings requires the use of quality pipe joint compound or PTFE (polytetrafluoroethylene) tape formulated specifically for stainless applications. Meets ISO4144 standards.
Buy It Now
Free Shipping Condition: New Location: Freehold, United States 2 Professional Foam Gun Applicators. Heavy Duty Convertible Professional Spray Foam Gun PTFE Coated Adapter x2. Top quality foam gun dispenser. Our foam ... moreguns are the highest quality money can buy at this affordable price.
Buy It Now
$6.75 Shipping Condition: New Location: China Screw Style: Female to Male. Model: Thread Extension Connector. Type: Thread Extension Connector. 1Pcs Thread Extension Connector. Material: Brass. 1 ... moreRoll PTFE Tape.
Buy It Now
$15.09 Shipping Condition: New Location: Canada
Buy It Now
Free Shipping Condition: New Location: Hibbing, United States PVC Schedule 80 pressure fitting. Adapts pressure pipe to standard Male pipe threads. PTFE thread tape is recommended for threaded joints. (Slip x F.I.P).
Buy It Now
Free Shipping Condition: New Location: China For Gema Powder Coating injector pump IG02. 10 x venturi Insert sleeve. 100% New and High Quality, In-Kind Shooting !
Buy It Now
Free Shipping Condition: New Location: China 100 PCS Annular gap collector nozzle 24122 5 for Wagner PI-F1 C 4 Powder injector pump. Annula r g ap collector nozzle. Air nozzle. I will reply to help ... moreyou within 24 hours. (Give us a trust and you are very satisfied.).
Buy It Now
Free Shipping Condition: New Location: China Resistor kit 134376 for Versa Spray II Manual & Automatic Powder Spray Gun. Versa Spray II Resistor kit. All kinds of spare parts you can find in Ailin， ... morewe manufacture powder coating parts for over 14 years.
Buy It Now
Free Shipping Condition: New Location: China 100% New and High Quality, In-Kind Shooting !
Buy It Now
$5.52 Shipping Condition: Brand New Location: China Our Pipe is made of PVC. Plain/Solvent Weld PVC Pipe Fittings are designed with female socket connections for sliding over the ends of unthreaded male ... morepipes. 50mm pipe for a 50mm fitting. Spigots and bushes go inside a fitting, a 50mm spigot will go inside a 50mm fitting eg 50mm elbow.
Buy It Now
Free Shipping Condition: New Location: China 2/10pc F Type Jack Female Coax Connector Adapter Coupler Coaxial Cable For Video. 2/3 Way Pneumatic Air Hose Fitting 1/4" Quick Coupler Manifold Connector ... moreAdapter. 5/6mm Male Thread Quick Air Fitting Pneumatic Hose Connector Mini Pipe Joiner.
Buy It Now
$10.00 Shipping Condition: New – Open box Location: Coffeyville, United States APPROXIMATE WEIGHT: 1 LBS.
Buy It Now
Free Shipping Condition: New Location: Sacramento, United States Squeeze tube for convenient application. Hand Tools And Tool Accessories. Container Size: 1 oz. Color: White. US Hardware 6.8 in. Because of that, we ... moreare unable to cancel an order once it has been submitted.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: 金东区, China OD 3/4 - 4 in 19mm - 102mm Sanitary Weld Ferrule + Tri Clamp + PTFE Gasket SS304. 89MM (3-1/2") 102MM (4") 3.5". 102MM (4") 115MM (4-1/2") 4". 1 PTFE ... moreGasket. 19MM(3/4") 50.5MM(2") 1.5". 2 Sanitary Pipe Welding Ferrules.
Buy It Now
Free Shipping Condition: New Location: China 4 1095899 Throat, Tivar. 50 PCS 1095899 Throat Tivar. 2 1095898 Holder, pump throat. 4 1095910 Throat, Teflon, virgin. - 1095922 Pump, powder feed, corona, ... moregeneration II. 7 241041 Coupling, quick disconnect, socket end.
Buy It Now
Free Shipping Condition: New Location: China ☼Number of flat spray nozzle is 1081658#. At present, we have gotten lots of favorable reception from different countries. We have very strong technical ... moreforce and strict quality standard; and annual sales capacity is up to more than 6000 sets every year on average.
Buy It Now
$5.52 Shipping Condition: Brand New Location: China 32mm pipe for a 32mm fitting. Our Pipe is made of PVC. Plain/Solvent Weld PVC Pipe Fittings are designed with female socket connections for sliding over ... morethe ends of unthreaded male pipes. Spigots and bushes go inside a fitting, a 32mm spigot will go inside a 32mm fitting eg 32mm elbow.
Buy It Now
Free Shipping Condition: New Location: Davison, United States Graco 185886 SPACER TEFLON PTFE LOT OF 4. Condition is New. Shipped with USPS Ground Advantage.
Buy It Now
$6.75 Shipping Condition: New Location: China Model: Brass Y Strainer Connector. Type: Y Strainer. 1Pcs Thread Y Strainer. Screw Style: Female to Female to end.
Buy It Now
Free Shipping Condition: New Location: China 3.100% interchangeable for the original.
Buy It Now
Free Shipping Condition: New Location: China G1/8~G3/4 Male Thread Coupler Brass Air Connector Fitting Adapter Coupler Socket. 2~10pcs Pneumatic Quick Fitting Hose Connector Air Push In 90° Elbow ... morePipe Pv4~16. 5/6mm Male Thread Quick Air Fitting Pneumatic Hose Connector Mini Pipe Joiner.
Buy It Now
$6.75 Shipping Condition: New Location: China Model: Nickel Plate. 1Pcs Thread Check Valve. Material: Copper. Type: Check Valve. 1 Roll PTFE Tape.
Buy It Now
$5.00 Shipping Condition: New Location: United States General Purpose Lubricant, Wet, Sprayon, LU213, Net Fill 15 oz, Container Size 20 oz, Lubricant Container Aerosol Can, Vegetable Oil, PTFE Primary Additive, ... moreMin. 12 Degrees F, Max. Light Industrial.
Buy It Now
Free Shipping Condition: New Location: China For Gema Powder Coating injector pump IG06. 100% interchangeable for original 1006485#. 100 x venturi Insert sleeve. no middleman, save money.
Buy It Now
$10.00 Shipping Condition: New Location: Hernando, United States Connection Type: Flare. Design: Two Piece. Outer box is not designed to fully seal. Temperature Range: -4°F to 149°F (-20°C to 65°C). Primary Material: ... moreBrass. Seat Material: PTFE.
Buy It Now
Free Shipping Condition: New Location: Cle Elum, United States MPN: 40291C. Sealant Tape Length Each Roll: 1368 in. Buy 4 Rolls and Save! Thread seal tape (also known as PTFE tape or plumber's tape). Twice the density ... moreof standard thread seal tape, great for stubborn threadsTHREAD SEAL TAPE1/2X1368.
Buy It Now
$5.00 Shipping Condition: New – Open box Location: Hernando, United States Connection: Type CxC. Design: Full Port. Primary Material: Brass. Ball Material: Stainless Steel. They only apply to the lower 48 United States. Temperature ... moreRange: Up to 300°F (149°C).
Buy It Now
$10.00 Shipping Condition: New Location: Hernando, United States Design: Full Port. Primary Material: Brass. Ball Material: Stainless Steel. They only apply to the lower 48 United States. Temperature Range: Up to 300°F ... more(149°C). Outer box is not designed to fully seal.
Buy It Now
Free Shipping Condition: New Location: China This is the head of spray electrostaice powder coating gun wx958. During this period,we will repair or replace a defective product or part with a new ... moreor refurbished item.
Buy It Now
$3.57 Shipping Condition: Brand New Location: China The tube fittings are designed to connect copper pipes, ensuring a secure and leak-free connection. This brass tube fitting is suitable for use in HVAC ... moresystems and water pipelines, widely used in plumbing work.SpecificationColor: Brass ToneMaterial: BrassThread Size: Male 5/8 inch SAE，suitable for connecting 5/8" OD copper pipes.Connector Diameter: 21.9mm / 0.87 inchOverall Size: 44 x 44mm / 1.73 x 1.73 inch(L*H)Packing List: 2 x Brass Pipe FittingsAdvantageMade from quality brass, this fitting is durable and can withstand the harsh conditions of HVAC systems. With 45-degree flared construction, it allows you to connect copper pipes without soldering, bringing convenience to maintenance work.
Buy It Now
Free Shipping Condition: New Location: China 100 PCS Annular gap collector nozzle 24122 5 for Wagner PI-F1 C 4 Powder injector pump. Annula r g ap collector nozzle. Air nozzle. I will reply to help ... moreyou within 24 hours. (Give us a trust and you are very satisfied.).
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China Powder pump core of manual powder coating gun PTFE material(imported materials, with wear-resistant, non stick powder characteristics). Suitable most ... moreof powder pump.
Buy It Now
$5.52 Shipping Condition: Brand New Location: China Our Pipe is made of PVC. Plain/Solvent Weld PVC Pipe Fittings are designed with female socket connections for sliding over the ends of unthreaded male ... morepipes. 50mm pipe for a 50mm fitting. Spigots and bushes go inside a fitting, a 50mm spigot will go inside a 50mm fitting eg 50mm elbow.
Buy It Now
$5.52 Shipping Condition: Brand New Location: China Application: PVC Pipe and Fittings are suited to many applications. White Imperial BSP Threaded PVC Pressure Pipe Fittings. FBSP= Female BSP Threaded, ... moreMBSP= Male BSP Threaded. BSP Threaded fittings are threaded together using PTFE tape.
Buy It Now
Free Shipping Condition: New Location: China 1× flat jet nozzle. 100% New and High Quality, In-Kind Shooting !
Buy It Now
Free Shipping Condition: New Location: China Help to divide the water from the faucet, good diverter for sink, washing machine, dishwasher, and more. If you are looking for a professional and reasonably ... morefaucet diverter, then your research is here.
Buy It Now
Free Shipping Condition: New Location: Columbia, United States Up for your consideration is one (1) Grayloc Seal Ring 51231n-4 Size 5 PTFE CTD AISI 630. 40mm x 2mm thick, Thread Type M.
Buy It Now
$2.99 Shipping Condition: New Location: China Our Pipe is made of PVC. Plain/Solvent Weld PVC Pipe Fittings are designed with female socket connections for sliding over the ends of unthreaded male ... morepipes. Application: PVC Pipe and Fittings are suited to many applications.
Buy It Now
$5.52 Shipping Condition: Brand New Location: China 90mm pipe for a 90mm fitting. Spigots and bushes go inside a fitting, a 90mm spigot will go inside a 90mm fitting eg 90mm elbow. Our Pipe is made of PVC. ... morePlain/Solvent Weld PVC Pipe Fittings are designed with female socket connections for sliding over the ends of unthreaded male pipes.
Buy It Now
$5.52 Shipping Condition: Brand New Location: China Our Pipe is made of PVC. Plain/Solvent Weld PVC Pipe Fittings are designed with female socket connections for sliding over the ends of unthreaded male ... morepipes. Imperial Thread 1/2", 3/4", 1", 1-1/4", 1-1/2", 2".
Buy It Now
Free Shipping Condition: New Location: China Flat nozzle. Round nozzle. During this period, we will repair or replace a defective product or part with a new or refurbished item. Repairs will be processed ... morethrough the manufacturer, we will assist in the repair procedure in any way we can to expedite the process.
Buy It Now
Free Shipping Condition: New Location: China 100 PCS 1095899 Throat Tivar Venturi Suction Tube for Nordson powder coating pump. 4 1095899 Throat, Tivar. 100 PCS 1095899 Throat Tivar. 2 1095898 Holder, ... morepump throat. 4 1095910 Throat, Teflon, virgin.
Buy It Now
Free Shipping Condition: New Location: China Ons encore. powder coating pump / injector (PTFE, Tivar Material ). I will reply to help you within 24 hours. 100% New and High Quality, In-Kind Shooting ... more!
Buy It Now
$2.99 Shipping Condition: New Location: China Our Pipe is made of PVC. Plain/Solvent Weld PVC Pipe Fittings are designed with female socket connections for sliding over the ends of unthreaded male ... morepipes. Application: PVC Pipe and Fittings are suited to many applications.
Buy It Now
$5.00 Shipping Condition: New Location: Hernando, United States Connection Type: CxC. Design: Full Port. Primary Material: Brass. Ball Material: Stainless Steel. They only apply to the lower 48 United States. Temperature ... moreRange: Up to 300°F (149°C).
Buy It Now
Free Shipping Condition: New Location: 金东区, China OD 3/4 - 4 in 19mm - 102mm Sanitary Weld Ferrule + Tri Clamp + PTFE Gasket SS304. 1 PTFE Gasket. 2 Sanitary Pipe Welding Ferrules. The real color of the ... moreitem may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Buy It Now
Free Shipping Condition: New Location: China OD 3/4 - 4 in 19mm - 102mm Sanitary Weld Ferrule + Tri Clamp + PTFE Gasket SS304. 89MM (3-1/2") 102MM (4") 3.5". 102MM (4") 115MM (4-1/2") 4". 19MM(3/4") ... more50.5MM(2") 1.5". 2 Sanitary Pipe Welding Ferrules.
Buy It Now
Free Shipping Condition: New Location: 金东区, China OD 3/4 - 4 in 19mm - 102mm Sanitary Weld Ferrule + Tri Clamp + PTFE Gasket SS304. 89MM (3-1/2") 102MM (4") 3.5". 102MM (4") 115MM (4-1/2") 4". 1 PTFE ... moreGasket. 19MM(3/4") 50.5MM(2") 1.5". 2 Sanitary Pipe Welding Ferrules.
|
|
|
|
Heateflex Benchtop PTFE Recirculating Wafer Etch Bath Washer (UCT402-6-1-1-3)
Heateflex Benchtop PTFE Recirculating Wafer Etch Bath Washer(UCT402-6-1-1-3) Heateflex UCT402-6-1-1-3 Benchtop PTFE Recirculating Wafer Etch Bath Washer 120V. 20A, 50/60Hz Outer Dimensions: 23.25" x 15" x 16.5" Inner Dimensions: 20.25" x 11.25" x 11.25" If you have any questions please contact us prior to bidding. Phone: 805) 648-3300, Normal business hours are 8am- 5pm PST Monday through Friday, Recycled Goods is located at: 3820 N. Ventura Avenue. Ventura, CA 93001, PID 48441
|
|
|
VINTAGE GEM Gold Micromatic SE Safety Razor & New SS PTFE Blade
Vintage GEM Micromatic Safety Razor"GEM MICROMATIC" FLYING WING" BULLET TIP" Gold Plate all metal razor This one has the"Bullseye" or"Magic Eye" A small etched mark on the center of the razor head that reminded users to keep the razor head flat against the face as they shaved. Quality Made in the USA- Vintage 1940's TTO Twist-to-open tip for easy blade changes and cleaning Closed Comb Design for smoother. Non-clogging shaves Uses widely available Single Edge Razor Blades Includes one new GEM Stainless Steel PTFE Coated SE Blade. Considered by some to be one of the best for these vintage razors. Average Used Condition. Finish shows some finish wear. Razor operates smoothly and closes tight. Check out the photos. Considered mild to medium. Popular among Single Edge Shaverss CLEANED& SANITIZED ... moreWITH BARBICIDE* SHAVE READY*BARBICIDE IS RECOMMENDED FOR USE IN HOSPITALS. HEALTH CARE FACILITIES, BEAUTY SALONS, BARBERSHOPS AND HAIRSTYLING ESTABLISHMENTS FREE SHIPPING IN THE USA* WORLDWIDE SHIPPING OFFERED* 14 DAY RETURN POLICY#2360
|
|
|
*USED* Kitz 2" Ball Valve 316ss SCS14 Body:CF8M Class:150 Seat:H-PTFE $400.00
USED* Kitz 2" Ball Valve 316ss SCS14 Body:CF8M Class:150 Seat:H-PTFE $400.00-Shipping costs will vary depending on location. If you have any questions please call 713-644-4011. Everything is sold as-is. Where-is, without warranties, unless expressed in writing. Industrial Surplus Inc. is a surplus warehouse in Houston, Texas with several lay-down yards throughout the United States. We buy and sell ALL types of surplus equipment. Machinery and material nationwide. We make every effort to provide honest and full disclosure regarding the condition of our inventory and include photos, however the following should be considered prior to purchase. All items are sold as-is. With no warranty or guaranty expressed or implied. Though some items may be in the original manufacturers packaging, ALL are sold as Used Surplus. As with all"used" ... moreitems, there may be signs of use and wear, e.g. minor scratches, scuffs, or blemishes. Test results and maintenance records will also vary per item. Please feel free to contact one of our representatives at(713) 644-4011 with ANY questions regarding product condition or shipping options prior to purchasing. Bidding or submitting a best offer on eBay. We will be very happy to address any and all questions or concerns. M.R.
|
|
|
Glass 1000mL Seperatory Funnel with PTFE Stopcock Chemistry Biology 1L Lab
Hello, I am selling an Clear 1000mL or 1L Seperatory Funnel. This item is ready for immediate shipment. As shown in the picture there are no cracks or chips in the glass. This item came from a commercial lab. Great for lab use! Sold in As/Is condition. No international bidders unless you are using the Ebay Global Shipping Program! Free shipping! Payment must be received within 3 days of listing completion; Paypal is the only accepted form of payment. Check out my feedback for my shipping record! Any questions feel free to ask. Listing new items all the time.
|
|
|
TEQCOM TP-2W12P-C tefleon pneumatic PTFE 2 way valve ¾” port normally closed
TEQCOM TP-2W12P-C valve manufactured by International Polymer Solutions PTFE Pneumatic Valve- 2 Way- 3/4 in Port- Normally Closed Full functional with 3/4 inlet/outlet FNPT female NPT. Includes 1/8" actuating fitting and two 3/4" Teflon inlet/outlet fittings. Valve was functional when removed from equipment. O-rings changed and valve rebuilt. Product Overview: IPS PTFE Pneumatic Valve(TP Valve) features an all PTFE wetted surface design. The design is ideally suited for harsh chemical and corrosive media and environments. Polytetrafluoroethylene(PTFE) Commonly known by its popular E.I. DuPont trade name PTFE, is well suited to clean room and deionized water applications. Features: One Piece PTFE Body• Optimum Anti-Corrosion Design• Ideal for Hi-Temp Applications• Complete Media Isolation Materials of Construction: Body.PTFE Bellows/Poppet.PTFE ... moreBacking Plate.PTFE Piston.PVDF Cap.Polypropylene Spring.Stainless Steel Specifications Style 2 Way Port A Size 3/4 in Port B Size 3/4 in Port C Size 3/4 in Port Configuration Normally Closed Orifice Size 3/4 in Dimension C 5.60 in Dimension D 3.53 in Dimension E 1.93 in Dimension F 3.64 in Dimension G 1.21 in Dimension H 0.85 in Maximum Pressure@ Port A 50 psi Maximum Pressure@ Port B and C 10 psi Maximum Media Temperature 300 ºF Minimum Actuator Pressure 50 psi Maximum Actuator Pressure 80 psi Actuation Port Size 1/8 in NPT Mounting Hole Dimension 1/4-20 X.50 Features Complete Media Isolation Ideal for Hi-Temp Applications One Piece PTFE Body Optimum Anti-Corrosion Design C v Rating 2.8 Materials of Construction Backing Plate- PTFE Bellows/Poppet- PTFE Body- PTFE Cap- Polypropylene Piston- PVDF Spring- Stainless Steel AB Option This style TP Valve offer a continuous metered flow path to reduce the potential of chemical and bacteria build-up. Currently only offered in our 2-Way Normally Closed Port Configuration. The"AB" Option adds a metering screw and ble
|
|
|
KNF Flodos Diaphragm PTFE Liquid Resistant Pump PML 5169-UNF300 24V 46.9W #V02-M
KNF, PML 5169-UNF300*DC24V. 46.9W*USED. Work well. Package included: 1 pcs only*S hipping address: We ship the item to your Paypal address. So please double check it. C ombine shipping: If you buy more than 1 item. We will give you 10% discount of total shipping fee. S end out time: The item will be shipped out in 3 days after clear payment. D elivery time: Depending on destination.Post strike.Storm,volcano etc are not considered. Table of delivery time(typical countries) Typical Country Delivery Time Working Days 5- 10 11- 20 21- 25 25- 30 30 Working Days + Saturday + Sunday 7- 14 15- 24 25- 35 36- 42 42 United States Rate(item arrived) 60% 35% 5% x x United Kingdom Rate(item arrived) 31% 60% 9% x x Australia Rate(item arrived) 21% 68% 11% x x Germany Rate(item arrived) 15% 66% 19% x x Canada Rate(item arrived) 22% 71% 7% x x Singapo Rate(item ... morearrived) 41% 53% 6% x x Russia Rate(item arrived) 0% 42% 53% 5% x Brazial Rate(item arrived) 0% 38% 49% 13% x*P aying method: We accept Paypal only. P aying time:Payment must be made within 7 days after the auction end. D efect of item:Please contact us in 7 days after receving it and we will refund or reship it as you like. But the customers must pay shipping fee. S ize change:You can change it. But you need pay shipping fee. D islike item:If you dislike the item after your receiving it. You can send it back and we can refund after our receiving it. But you need pay shipping fee.
|
|
|
Burkert 2000A 3/2 PTFE BZ Angle Seat Valve Actuator Pilot 23-145 PSI / Warranty
Payment Policy Brand New Sony CyberShot 8 MP Di Burkert 2000A 3/2 PTFE BZ Angle Seat Valve Actuator Pilot 23-145 PSI/ Warranty Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description Burkert 2000A 3/2 PTFE BZ Angle Seat Valve Actuator Pilot 23-145 PSI/ Warranty Used Condition Burkert Angle Seat Valve Air Actuator Assy Burkert 2000A 3/2 PTFE BZ. NPT 3/2 Pmed 232 PSI, Pilot 23-145 PSI With Burkert 3513 Tube Assembly Inventory Number: 2S82059-04-14 Item Condition Used Condition Actual Picture of the item is provided. What you see in the picture(s) is what you get Note: In Quantity Auctions. The serial number of the item that you receive may vary from ... morethe item shown above. Payment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment instead of PayPal. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping& Handling Policy 1) Handling Time: We ship packages in 1 business day after receiving payment. However larger items and quantity orders take more time to pack. 2- Shipping Method: Our standard carrier is U
|
|
|
$194 VALUE! KIMBALL KIMAX 1000ml Separatory Funnel, PTFE stopper, #27 Stopper
For sale. One(1) KIMBALL Kimax, 1000 ml Pear-Shaped Seperatory Funnel, PTFE Stopcock, with#27 Ground Glass Stopper. Funnel is LIKE BRAND NEW OLD STOCK with no chips. Cracks or scratches. Thorough cleaning and sterilization(if necessary) are recommended before use. Storage liquidation of shuttered environmental laboratory. Acquire this Original Like New Old Stock at near HALF OFF the replacement cost! REPLACEMENT COST($194) here: Item(s) in photos are exact item(s) you will receive. Please review photos carefully and contact me with any questions you may have prior to bidding. Will Combine Shipping. If winner of multiple listings. Please wait for revised combined shipping invoice immediately sent upon auction(s) end. All items are shipped via Promptly& Securely with delivery tracking. I offer fast shipment upon payment! Your item(s) will ... moregenerally be mailed within the same day and/or at most 24 hours within receipt of payment! NOTE* Payment is due upon buyer/auction winner's receipt of invoice from Seller at auctions end. eBay Automatic Unpaid claim setting is set for 2 day and if unpaid. Item be automatically re-listed. If planning to bid. Please be prepared to pay upon receipt of invoice, thank you! NOTE* I only ship within the United States. We believe in leaving feedback for all of our customers. We pride ourselves on our customer service(all aspects of our transaction is handled the way we appreciate being treated) and will resolve any problems a customer might have. Sold"as is" without warranty expressed or implied. Buyer is responsible for determining the suitability of this product for their application. By Purchasing this item. Buyer assumes sole responsibility for its use and will hold Seller free from any liability with regard to its future use. It is agreed that the Buyer has a reasonable knowledge of its use and is solely responsible for its operation from the time they have physical possession of the item. ADDITIONAL LABORATORY GLASSWARE& INSTRUMENTS FUNNELS $151 VALUE! SE LA
|
|
|
ANTIQUE Ever-Ready SE SAFETY RAZOR with NEW GEM PTFE BLADE
American Safety Razor Corp. USA Antique Ever-Ready Safety Razor Nickel Plated Brass ~ Says. Ever-Ready BKLYN,N.Y. U.S.A. PAT. APP'D. FOR ~ Early 1900's design FLIPS OPEN FOR EASY CLEANING AND BLADE CHANGES USES READILY AVAILABLE SINGLE EDGE BLADES- INCLUDES 1 NEW GEM STAINLESS STEEL PTFE COATED BLADE NICE RAZOR. NOTICE SOME FINISH WEAR. BLADE DOOR IS TIGHT. TEETH ARE STRAIGHT. BLADE STOPS LOOK GOOD. WORKS PERFECT. LOOK OVER THE PHOTOS FOR MORE ON CONDITION CLEANED& SANITIZED WITH BARBICIDE* BARBICIDE IS RECOMMENDED FOR USE IN HOSPITALS. HEALTH CARE FACILITIES, BEAUTY SALONS, BARBERSHOPS AND HAIRSTYLING ESTABLISHMENTS FAST FREE SHIPPING IN THE USA* WORLDWIDE SHIPPING OFFERED* 14 DAY RETURN POLICY American Safety Razor Corp. USA#2312
|
|
|
Kontes Kimble Glass 5 Place Port Double Vacuum/Gas Manifold 4mm with PTFE Valves
Kontes Kimble Glass 5 Place Double Vacuum/Gas Manifold with 4mm PTFE Valves This manifold is for connecting inert gas and vacuum sources. 4 mm PTFE vacuum valves provide grease-free fine control· Sample contacts only PTFE and borosilicate glass· Beams are 1/2” 12.7 mm) OD. With upper-left and lower-right ends open· Ports have 9 mm OD openings· Distance between valves is 100 mm· 216060 series has tip o-rings; 216140 series does not· Plugs for 216140 series are 826601-0004· Plugs for 216060 series are 826501-0004· Manufactured from 33 expansion. Low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements* RETURNS- This item has a 14 day return policy once delivered for a refund. Excluding shipping costs. The item must be returned in its original condition as ... moreit was sold. Buyer must contact us before returning item by email or phone with details of the return. Buyer pays for return shipping costs. ALL ITEMS ARE DESCRIBED TO THE BEST OF OUR ABILITY. PLEASE REFER TO PICTURES. ITEMS ARE FROM SURPLUS INVENTORY. PLEASE FEEL FREE TO CONTACT US IF YOU HAVE ANY QUESTIONS AND WE WILL DO OUR BEST TO ANSWER. WE ALWAYS SHOW THE ACTUAL ITEM BEING SHIPPED ON SINGLE ITEMS. IF MULTIPLE ITEMS ARE AVAILABLE– WE TAKE 1 PHOTO BUT ITEMS WILL BE IN SAME CONDITION AND ARE SAME ITEM. WE DO ASSUME THAT THE BUYER IS KNOWLEDGEABLE AND PROFICIENT IN THE USE OF THIS TYPE OF EQUIPMENT. Seller assumes no responsibility for damage or actions resulting from the use or misuse of the item sold. We are not an authorized dealer for any of the products that we list on eBay. We are not a party to any manufacturer's warranty that may or may not apply. Shipping: Local FREE Pick-Up Option in Carlsbad. CA USA and Temecula, CA USA. Please message for appointment. We do reuse boxes and packing materials to help keep the cost of shipping down. We ship Monday- Friday. We value your feedback and comments. If you are 100% satisfied. Please lea
|
|
|
Teflon/PTFE Sheet, Virgin Grade, Natural, 1" x 11-1/2" x 12" (11.5 lbs)
Teflon/PTFE Sheet. Virgin Grade, Natural, 1" x 11-1/2" x 12" 11.5 lbs) A Virgin Grade. Natural, Teflon/ PTFE Sheet. This sheet is 1" thick, and 11-1/2" by 12" The net weight is 11.5 lbs. Please be aware that as we have multiple available the unit the winner will receive is unlikely to be the one shown. But will be in the same or better condition. Please take a look at all of the provided photos before placing your bid to thoroughly inspect the lot contents and condition. Item Condition: Used Return Policy: We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Listed for M.A. by G.L. Located at: EB9-A-3 Shipping weight is 13lbs. 0oz, shipped from our warehouse in California. zip 90221) Default Shipping Service: UPS Ground ... moreCalifornia residents will be charged 9.00% sales tax. Tennessee residents will be charged 9.00% sales tax. We have offices in both California and Tennessee and are required to charge tax to any shipment sent anywhere in either state. We accept the following methods of payment: For foreign orders we accept PayPal. We reserve the right to refuse other payment types at our discretion. We make our decision on a case by case basis. Due to previous problems with some foreign credit cards. After your item has shipped. We will email you the tracking info. ATTENTION FOREIGN BUYERS We will not make false statements on Customs Documents. When you buy an item it will not be listed as a"gift" It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import Taxes) could be due when the shipment enters your country. YOU are responsible for those duties/taxes; know your own country's rates/policies before you buy. Due to the various levels of service and care provided by the different postal services around the world. We cannot guarantee delivery outside the United States. Insurance is strongly suggested or may be required. If the item is returned/
|
|
|
TYGAFLOR PTFE SELF ADHESIVE TAPE 0.006” X 3” X 36 INS - 5 PACKS
TYGAFLOR PTFE SELF ADHESIVE TAPE 0.006” X 3” X 36 INS- 5 PACKS This auction comprises of 5 packs of self adhesive PTFE sheet. These are ex military for photographic test apparatus and as you can see, each pack cost £7.50 so we have £75 worth of product for just £5! Tygaflor PTFE(Polytetrafluoroethylene) provides excellent non-stick properties and is supplied in 1 meter lengths which are ideal for protecting heated welding plates and will ensure optimum PVC-u welding performance. gsrx_vers_577(GS 6.7.5(577)
|
|
|
1000ml,24/40,Glass Separatory Funnel,Pyriform,Pear Shape,PTFE Stopcock
1000ml.24/40,Glass Pyriform Separatory Funnel,Pear Shape,PTFE Stopcock,Chemistry Labware Made From Borosilicate Glass 3.3 Volume:1000ml Joints:24/40 Welcome to our store! We are honest and trustworthy seller. All pictures are of real products. Please just bid with confidence! Your satisfaction is our first priority. Thank you! Customers Note Shipping: We only ship to paypal confirm address. Please match your address with paypal before you make a payment. We ship worldwide! Buyers are responsible for duty tax. Please kindly leave your phone number for fill out international shipping label purpose. We use standard Singpost.Epacket,EMS Ship to worldwide. All products will be shipped out after 24 hours(except Saturday. Sunday, and Holidays) Combine shipping is available. Contact us: Please just contact us no hesitation via eBay message system ... moreif you have any question about the items you interested in. We will be very glad to help you. We try our best to reply to your emails ASAP.
|
|
|
Vintage uA201AHM Operational Amplifier with PTFE Teflon socket (3 pcs.)
Part: uA201AHM/ 8 pin Manufacturer: Fairchild Semiconductor(original Integrated Circuit) Condition: used Description: Vintage Linear Integrated Circuit/ Operational Amplifier. Metal case, military version, with rare PTFE teflon socket Lot of 3 pcs.
|
|
|
ITT BIO-TEK Sanitary Diaphragm Valve 1/2" Tri-Clamp, 316L SS, PTFE Stainless
Up for auction is a used 1/2" ITT BIO-TEK sanitary diaphragm valve with a Teflon(PTFE) diaphragm. Valve is in excellent condition. Shipping is USPS small flat rate box. Thanks for looking.
|
|
|
3/8" Stainless Steel Braided Hose Assembly, PTFE--- 8 Quantity
This Auction is for an quantity of 8 total shipped in a flat rate usps priority box. 3/8 Stainless Steel Braided Hose Assembly.Auction Quantity 8. In good condition. These are around 7 years old or so. Sold as is. 3/8 inch x 1/4 inch male npt fittings I ship once a week. Ready to be shipped: For the most accurate information please look at the pictures provided: All items that have been listed were obtained from a Industrial environment and have not been tested. We try to the best of our ability to provide an accurate description of each item that is being sold. But please refer to the picture or PDF for a better description. The item you receive may differ from the item in the picture due to multiple quantities of similar items. All measurements(lengths, widths, diameters) may not be exact so contact us if you want to ensure an exact measurement. ... moreAll items are sold as is, if you have any question please contact us for more information. Our goal is to provide the purchaser with as much information as possible.
|
|
|
Cole Parmer Direct Reading PTFE Glass Flowmeter 65mm Valve Hydrogen 42 std LPM
This auction is for one piece: Cole Parmer Direct Reading PTFE Glass Flowmeter 65mm Valve Hydrogen 42 std LPM_ Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Condition: used with some scratches but functions_ SS 316 Tri Clamp-or- Tri Clover aka. Tri-Clover Coin Cap SS316 Beer Brewery Microbrewery Wine Winery Still Distill Distillery SS_ Need Lab Glass? Click Image Below: To see stainless steel items. Click Image Below: Use the make offer button(if applicable) for multiple item purchases and enter quantity_ key words: Beer Brewery Microbrewery Wine Winery Still Distill Distillery SS Home-brew Homebrew Ale Lager Carbonate Carbonation Spirits Ferment Fermentation Yeast Propagate Lees Krausen Gyle Prime_ Our aim is to have every buyer satisfied with their purchase. If you require additional information not mentioned ... morein the description or further clarification of the functioning condition of an item. Please ask and we will respond to your request swiftly and to the best of our knowledge. Please refer to our“Store Pages” links located on the left side of our store homepage to review our full policies and detailed FAQ. No need to read the fine print with us as we stand behind our products.
|
|
|
Eppendorf Centrifuge 5430 5430R FA-45-30-11 ROTOR +AEROSOL-TIGHT +LOCK LID +PTFE
EPPENDORF CENTRIFUGE MODEL 5430 5430R FA-45-30-11 FIXED ANGLE ROTOR + AEROSOL-TIGHT QUICKLOCK LID + PTFE-Coated Rotor and Lid Tube Size: 1.5 ml/2.0 ml. 30 Position Fixed angle Rotor 30 position for Centrifuge Model 5430 5430R Minor scuffs. Overall good condition Low use. Clean SAVE 40% vs. new cost. Free packing. FEDEX shipping + insurance with Buy it Now. Shipping charges are for lower 48 states only. Contact me for international and other shipping. Shipping charges include all packing, shipping, insurance, fuel surcharges, etc.
|
|
|
Parker Hannifin 18-229-900 20PSIG Chemically Inert PTFE Liquid Manifold Valve
Search our eBay Store! Parker Hannifin 18-229-900 20PSIG Chemically Inert PTFE Liquid Manifold Valve SKU: JV-EDW-C-HANNIFIN18 Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge New Page 1 Parker Hannifin 18-229-900 20PSIG Chemically Inert PTFE Liquid Manifold Valve· P/N: 18-229-900· Unit is untested. 5x connection ports. There are minor scuffs and residue on this unit. Unit Dimensions(L”xW”xH” 4 1/8 x 4 1/8 x 1 7/8. As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10. With 10 being in new or excellent condition, this item is rated as an ... more8. SEE PHOTOS. All images taken in house of the unit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. D0 N0T bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medi
|
|
|
Iwaki SB-5SV-L-04 60ml/S.T 0.1MPa 1/4" Fitting PTFE/Stainless Steel Bellows Pump
Search our eBay Store! Iwaki SB-5SV-L-04 60ml/S.T 0.1MPa 1/4" Fitting PTFE/Stainless Steel Bellows Pump SKU: JV-JOH-C-IWAKIPUMPERS Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Iwaki SB-5SV-L-04 60ml/S.T. Max Capacity 0.1MPa Max Pressure 1/4" Fitting PTFE/Stainless Steel Bellows Pump. Model: SB-5SV-L-04. Unit is untested. Dimensions(L”xW”xH” 11-1/2 x 6-1/2 x 5. As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10. With 10 being in new or excellent condition, this item is rated as a 9. SEE PHOTOS. All images taken in house of the unit(s) ... morebeing sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. D0 N0T bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. Our Contact: S
|
|
|
Swagelok 1/4" 316 SS Braided PTFE Hose 24" with 3/8" FNPT & 1/2" MNPT Connectors
Item Description- Swagelok 1/4" T Series Braided Hose. PTFE Lined fitted with 3/8" Female NPT Connector on one end and 1/2" Male NPT Connector on the other Hose MPN: SS-4BHT-24 Fitting#1 MPN: SS-400-7-6 Fitting#2 MPN: SS-400-1-8 All 316 Stainless Steel Hose Specifications: SPECIFICATION SUMMARY, Body Material, PTFE, Connection 1 Size, 1/4 in. Connection 1 Type, Tube Stub, Connection 2 Size, 1/4 in. Connection 2 Type, Tube Stub, eClass(4.1) 37110201, eClass(6.0) 37-11-00-00, Hose Length, 22.7 in. 57.7 cm) Hose Size, 3/16 in. 4.8 mm) Inner Diameter, 0.16 in. 4.1 mm) UNSPSC(11.0501) 40142000, UNSPSC(4.03) 40141504, UNSPSC(SWG01) 40141504, Fitting#1 Specificatio ns( SS-400-7-6) SPECIFICATION SUMMARY, Body Material, Stainless Steel, Body Type, Female connector, Series, Swagelok tube and adapter fittings, End Connection 1 Size, 1/4 ... morein, End Connection 1 Type, Swagelok® tube fitting, End Connection 2 Size, 3/8 in, End Connection 2 Type, Female NPT, Cleaning, Swagelok SC-10, Fitting#2 Specifications( SS-400-1-8) SPECIFICATION SUMMARY, Body Material, Stainless Steel, Body Type, Male connector, Series, Swagelok tube and adapter fittings, End Connection 1 Size, 1/4 in, End Connection 1 Type, Swagelok® tube fitting, End Connection 2 Size, 1/2 in, End Connection 2 Type, Male NPT, Cleaning, Swagelok SC-10, We also have a compatible. Click the link to go straight to the listing. Item Conditions- ITEM CONDITION: Excellent. Lightly Used. Our New& Used Items are generally obtained from business closings or equipment upgrades. Some new items may have writing on boxes or stickers placed for inventory purposes of the business. Items that are not in original boxes and appear to be in new condition will be sold as"new other" All items sold as"new" are in factory packaging. Items sold as"Used" have been tested and/or inspected for functionality. We will try to indicate if item was inventory or removed from operational(or non-operational) equipment. Pictures are of the actual ite
|
|
|
Georg fischer, Manifold with, NW15 / DN15 PTFE diaphragm valve assembly
Georg fischer. Manifold with, NW15/ DN15 PTFE diaphragm valve assembly, with 5 valves attached. No signs of use. Valves can be removed if desired for individual use. Cat# P938. Loc. 31E.
|
|
|
Aldrich Separatory Funnel with PTFE Stopcock - 60mL
This is a 60mL Kimble Separatory Funnel with PTFE stopcock. As pictured.
|
|
|
VINTAGE GEM SE SAFETY RAZOR & NEW PTFE BLADE - MADE IN USA
VINTAGE GEM SINGLE EDGE SAFETY RAZOR Made in USA ~ Quality Razor ~ Push-button open for easy cleaning and blade changes Uses most any standard Single Edge Blade. Includes a New GEM Stainless Steel PTFE coated blade. GOOD USED CONDITION ~ NOTICE A SMALL DING IN OUTER BLADE HOLDER. DOES NOT EFFECT PERFORMANCE. WORKS GREAT CLEANED& SANITIZED WITH BARBICIDE* SHAVE READY*BARBICIDE IS RECOMMENDED FOR USE IN HOSPITALS. HEALTH CARE FACILITIES, BEAUTY SALONS, BARBERSHOPS AND HAIRSTYLING ESTABLISHMENTS 100% + feedback so Buy with confidence. Shipping USPS ASAP after payment is received. I'm not an expert on razors so please express any questions or concerns. Thanks. FREE SHIPPING IN THE USA* WORLDWIDE SHIPPING OFFERED#2414 ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1477ec135d1-0x106-
|
|
|
Beautiful Vintage GEM G-BAR SE Safety Razor & New PTFE Blade - USA
GEM G-BAR SAFETY RAZOR Manufacturer: American Safety Razor Company. Brooklyn, NY, USA. Dates in Production: Late 1940's through the 1950's. Type: Single Edge. Solid Bar Guard. Description: All metal with chrome plating. The letter"G" is molded into the sides of the handle. NICE Used Condition Notice some scratches on the blade door. Nice plating otherwise. See the photos. Works Great Easily flips open for cleaning and blade changes. Includes One new GEM Stainless Steel PTFE Coated SE Blade. Cleaned and Sanitized with Barbicide* Recommended for use in hospitals. Health care facilities, beauty salons, barbershops and hairstyling establishments. Notes of Interest: The name"G-Bar" is a name given by collectors because of the letter"G" being molded into the side of the handle. The G-Bar was originally sold ... moreas the"Heavy Flat Top" There are at least two variations of this. Possibly more. The differences are slight, but involve the seam area of the handle. Fast Free Shipping in the USA- Worldwide Shipping Offered- 14 Day Return Policy- Buy with Confidence#2337
|
|
|
Vintage GEM G handle Single Edge Safety Razor USA 1949 - NICE W PTFE BLADE
GEM Single-Edge SAFETY RAZOR"This is an example of a GEM"Featherweight" type single edge safety razor. It was made sometime around 1949. This one has the Nickel plated head"Many people swear by single edge razors. And the blades are still readily available. Nice old razor. Ivory color handle. Flip open top. Marked Gem Razor inside. Has'G' in circle on handle. Gem was made by American Safety Razor Corp. Brooklyn, NY USA, 1949 Very Nice Condition. May be NOS ~ Notice some small marks& scratches. Razor is sound and tight. Works great. Includes a new GEM PTFE coated blade. Shave Ready! CLEANED& SANITIZED WITH BARBICIDE* BARBICIDE IS RECOMMENDED FOR USE IN HOSPITALS. HEALTH CARE FACILITIES, BEAUTY SALONS, BARBERSHOPS AND HAIRSTYLING ESTABLISHMENTS 100% + feedback so Buy with confidence. Shipping USPS ASAP after ... morepayment is received. I'm not an expert on razors so please express any questions or concerns. Thanks. FREE SHIPPING IN THE USA- WORLDWIDE SHIPPING OFFERED- 14 DAY RETURN POLICY#2336
|
|
|
Set 3 Magnetic stirrers, teflon PTFE Spinbar with Pivot Rings 2.5cm, 3.6cm, 5cm
These are octagonal stir bars with built-in pivot ring has a white Teflon(PTFE) casing and an internal magnet made from alnico V(an alloy of aluminum. Nickel, iron, and cobalt) for a range of laboratory stirring applications. The octagonal shape creates more turbulence and a stronger vortex than a round, cylindrical shape or a polygonal shape. The magnet sits inside a Teflon(polytetrafluoroethylene, or PTFE) casing, which is chemically inert, can be used with corrosive chemicals, and helps reduce friction and wear while spinning. A built-in pivot ring minimizes contact between the bar and the container to help reduce vibration and wear during stirring. The casing material is FDA approved for use in food, drug, and cosmetic applications. Magnetic stir bars(sometimes called stirring bars. Spin bars, or fleas) are used to stir a liquid or solution ... morein biological, chemical, medical, and research laboratory applications. The stir bar is placed inside a container of liquid or solution that is seated on a magnetic stirrer(also called a magnetic mixer) which is a laboratory device that creates a rotating magnetic field using a rotating magnet or multiple stationary electromagnets. The rotating magnetic field causes the bar to spin, which stirs the liquid or solution. Stirring bars are offered in a variety of sizes and shapes, and they are encased in materials such as glass or plastic to help prevent contamination of the liquid or solution, to reduce friction, and to provide resistance to chemicals, abrasion, and heat. The bar may have a pivot ring or pivot point to minimize contact with the container, reduce friction, and improve its spinning. The size and shape of the container and the volume and viscosity of the liquid or solution to be stirred determine which stir bar shape, size, and casing will suit a particular application. New $13.50. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-1478703d0a5-0x115-
|
|
|
FEDERAL PROCESS M7000 THRED TAPER Automatic PTFE THREAD Taping Machine
FEDERAL PROCESS M7000 THIS CAME FROM A BUSINESS THAT RECE NTLY CLOSED DOWN. TH E TAPER IS IN GOOD USED CONDITION AND W ILL COME WIT H ALL OF THE EXTRA TAPE CARTRIDGES SHOWN. THERE'S S A FEW SCRAPES AND SCRATCHES ON THE CLEAR PLEXIGLASS WINDOW AND BLACK PAINT. OWNERS MANUAL IS AVAILABLE FOR FREE ONLINE. GUARANTEED IN GOOD WORKING CONDITION INFO OFF THE WEB: If you're currently wrapping threaded parts with PTFE tape by hand or using messy liquid pipe sealant. It can be costly and imprecise. With the Thred Taper automatic PTFE taping machine. You can always be assured a perfect wrap of PTFE tape at the least amount of cost. The Thred Taper Automatic PTFE Tape Machine can help you improve quality and increase productivity while saving money. The Thred Taper's measured PTFE tape dispenser automatically applies PTFE tape to most fittings ... morein about 3 seconds, saving you as much as 500% on your taping costs. For OEMs. It virtually eliminates product failure due to leaks. For suppliers, you can offer the value-added feature of fittings pre-wrapped with PTFE tape for hassle-free assembly. In addition, this compact, easy-to-use machine allows for quality and consistency that is unmatched by hand wrapping. Can apply 2-5 wraps of PTFE tape Virtually eliminates leaks Increases component reliability Fittings can be pre-wrapped with PTFE tape to eliminate field installation problems Tape dispenser applies 3/16” 1/4” 3/8” or 1/2” PTFE tape so you can use the proper width for a part Wraps American Tapered. British Straight and Metric Threads No messy liquid pipe thread sealants or pipe dope Parts wrapped with our high quality PTFE tape can be pressure-tested instantly Prevents shredding of PTFE tape into critical systems by maintaining a consistent“set back” from the fitting end Threaded rollers run the PTFE tape deep into the thread root for proper sealing of pipes. Fittings, valves, other threaded parts Ensures a superior bond which will not unwrap during storage or shipping Eliminates reverse wrapping. A common cause
|
|
|
Advance SAM 3240-X339CB-3A 3/8" 1/4" Tube Fittings Pneumatic PTFE Valve NO OIL
Search our eBay Store! Advance SAM 3240-X339CB-3A 3/8" 1/4" Tube Fittings Pneumatic PTFE Valve NO OIL SKU: JV-JOH-C-TEFLONSAM3240 Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Advance SAM 3240-X339CB-3A 3/8" 1/4" Tube Fittings Pneumatic PTFE Valve NO OIL. Model: 3240-X339CB-3A. Unit is untested. Dimensions(L”xW”xH” 6-1/8 x 3 x 1-1/4. As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10. With 10 being in new or excellent condition, this item is rated as a 9. SEE PHOTOS. All images taken in house of the unit(s) being sold. Except ... morefor multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. D0 N0T bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. Our Contact: SVC ASSET MANAGEMENT. IN
|
|
|
Used Whitey 1/4" Tube x 1/4" Tube OD Brass Ball Valve, B-42S4, 2500 PSIG, PTFE
Plourde's Toolbox Bargains. LLC Manufacturer: Whitey Item: One Piece Ball Valve Part Number: B-42S4 Actuator Type: Manual Body Material: Brass Flow Pattern: Straight(2-way) Service Class: General Orifice: 0.125" 3.2 mm) End Connection 1 Size: 1/4 in End Connection 1 Type: tube fitting End Connection 2 Size: 1/4 in End Connection 2 Type: tube fitting Handle Color/Style: Black Lever Ball/Stem Material: Brass O-Ring: PTFE Ring/Disc Material: PTFE-coated brass Cleaning: Standard cleaning SC-10 Lubricant: Dow M111 Tested: According to WS-22 Max Temperature with Pressure Rating: 150°F 2500 PSIG/ 172 BAR@ 65°C) Room Temperature Pressure Rating: 2500 PSIG@ 100°F(172 BAR@ 37°C) See pictures above for more details. Please feel free to contact us with questions. We combine shipments whenever possible to lower customer ... morecosts. International buyers are responsible for paying all import duty. Tax, and fees which may be collected by their country when the parcel arrives. We declare the exact purchase price as the value of the goods when completing the customs declaration. Plourde's Toolbox Bargains LLC makes no representation of any item(s) sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit(s) will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the item(s) The Purchaser, by bidding on this item, indicates their acknowledgment of and agreement to the terms of this disclaimer. found at eBay App Review
|
|
|
Cole Parmer Masterflex Pump Controller 7553-50 W/ PTFE Diaphram Pump 7090-42
COLE PARMER MASTERFLEX PUMP CONTROLLER WITH PTFE DIAPHRAM PUMP MODEL: 7553-50 PUMP MODEL: 7090-42 UNIT POWERS ON AND PUMPS. WE WILL GUARANTEE THE UNIT TO BE FUNCTIONAL. UNIT IS USED AND HAS SOME SCUFFS AND SCRAPES FROM NORMAL WEAR. ONLY WHAT IS PICTURED IS INCLUDED IN AUCTION. 14 DAY WARRANTY PAYMENT We accept payments in US Dollars through Paypal Please allow extra days to clear the fund if you pay by an eCheck If you prefer to pay with a Visa. Mastercard, or American Express card please contact me after the auction ends We will hold your order pending receipt of your payment for up to 3 days if no immediate payment is required If the payment is not received in 3 days the sale will be cancelled and the item will become available for sale WARRANTY AND RETURNS We guarantee our items not DOA unless otherwise stated in auction. We ask that you ... moreplease contact us first if you would like to return a purchase. If you have any issues or concerns with your purchase please contact us. We will do our best to make it right. Returns for defective items are accepted within 14 days of receipt. We offer an exchange or money back. Shipping for returned items that are not defective is the responsibility of the buyer. We ship exactly as described in auction. If manuals. Software, packaging etc. are not mentioned, they are not included. Returned items must be in the same condition as they were shipped. SHIPPING We ship 1-2 business days after cleared payment(excluding holidays and weekends) Shipping is via UPS Ground or USPS Priority Mail If you need a different method of s hipping please contact us before auction ends and we will do our best to accomodate you. INTERNATIONAL BUYERS We ship internationally on a case by case basis. If you are an international buyer please contact us before buying or bidding on any of our items. We will not ship internationally unless we are contacted first. Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please ch
|
|
|
Kimax glass separatory separation funnel 60 ml PTFE stopcock #16 0.06
Used Kimax separatory funnel. tip is broken as shown in the attached photo.
|
|
|
NELES JAMESBURY BALL VALVE 3/8" NPT 316 SS ALL STAINLESS BODY BALL STEM PTFE
Here's a 3/8 stainless steel ball valve made by Neles Jamesbury Seats PTFE 316 SS Ball 316 SS stem 150 PSI Working Pressure
|
|
|
STOPCOCK PLUG, Teflon, PTFE, Double Oblique, LOT OF 3, New/Used, 2 &4mm Bore
PTFE/Teflon® Stopcock Plugs Double-Oblique General Description A set of 3 most likely Corning®/Pyrex® brand. Dual angled bore replacement plugs. The bore diameters are about 4 mm on two of the plugs and about 2 mm on the third plug. This is a conveniently-sized lot because the taper lengths are the same. Yet the widths are different, resulting in a choice of two different taper angles. The two 4 mm plugs are unused and the 2 mm plug is possibly used. Each plug includes the white washer. Black o-ring and lock nut. The bore diameters are just over 4 mm. With stopcock plugs there are often body size variations within a given bore diameter. So be sure to check dimensions below to see if the other attributes are compatible with your glassware. Alinging the bores. As well as ensuring the taper has the same dimensions as your plug ... morehousing is critical. See the tables below for taper dimensions. Aligning the bores- The bore locations are as follows and are based upon the approximate center of the bore in relation to their distances from the top of the taper: On the upper side. The bore distances from the top are ~12.5 mm& ~23 mm(4 mm plug) 13 mm& 22.5 mm(2mm plug) On the lower side(the orientation in the 3rd photo) the bore distances from the top are ~23 mm& ~31.5 mm(4 mm plug) ~22 mm& ~30 mm(2mm plug) Retail: 250+(Similar plugs with only one bore retail for over $80 each. Product Details(4 mm Bore Plugs) Taper Length ~43 mm Diameter at narrow end of taper ~10.5 mm Diameter at wide end of taper ~18.75 mm Diameter near middle of the taper(~21mm down the taper) ~15 mm Product Details(2 mm Bore Plug) Taper Length ~43 mm Diameter at narrow end of taper ~9 mm Diameter at wide end of taper ~17.25 mm Diameter near middle of the taper(~21mm down the taper) ~13 mm Shipping See the shipping calculator for the cost to ship this item alone. Will be packaged in a new 200 lb. burst test shipping box. Insurance is included in the shipping calculator total. Insurance: Items will be professionally insured by
|
|
|
2000ml (2 Liter) Lurex Glass Reaction Flask Funnel w/ PTFE Stopcock on bottom
Up for sale is an excellent used piece of lab glassware made by Lurex. This is a reaction flask/funnel with a 2000ml(2 Liter) capacity with a PTFE valve at the bottom. The valve is in good working condition is fairly clean. The flat part of the reaction vessel is approximately 5-1/4" in overall diameter and the glass is approximately 5/8" thick. The glass is not 5/8" thick on the whole piece but just at the top where you would clamp the top of reaction vessel down. The overall length of the piece is 15" This piece weighs just shy of 3 lbs. Feel free to ask any questions regarding the reaction flask and make sure to check out my! Key words: Experiment. Glassware, Lab Glass, Flask, Open ended, Stock Cock, Valve, Hand Made, Thick.
|
|
|
C110474 Cole-Parmer Masterflex 7521-40 Console Drivew/ 77390-00 PTFE Tubing Pump
Click to Enlarge) Product ID# C110474 This Cole-Parmer Masterflex 7521-40 Console Drive with 77390-00 PTFE Tubing Pump looks to be in good cosmetic condition. Showing some signs of wear. It powers up, and the power light illuminates, and the pump head spins in both directions, and the speed is adjustable. However, this is the extent of my testing of it, and it is being sold as-is. Approximate overall unpacked dimensions: 14"L x 8"W x 8"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 42 dollars(for DOMESTIC shipments only- 48 contiguous states excluding ... moreHawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 14 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California and Texas Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa Clara County, the current basic state tax rate applies. F
|
|
|
Marmot Gopher Sleeping Bag Granite Gear Down XL Gore-Tex Nylon PTFE Membrane
Gopher Marmot Down Sleeping Bag. Granite Gear. Black. Gore-Tex laminated Nylon. PTFE Membrane. Size XL. Packing bag is included. It's made like a backpack(with two straps that fit over shoulders) Straps can be adjusted. Second pic is inside-out view. Rated at-20 to-40 F. Zipper Left. Used in excellent condition. Super fluffy. And full. No smells. Marmot does not make bags like this anymore. I don't think anyone does. Reading the label: Gore-Tex. Mashine wash warm. Not hot. Use mild soap. Tumble dry warm. Do not drip dry. Do not dry clean. Reading second label: Shell 100% nylon laminated with Gore-Tex, PTFE membrane. Lining 100% nylon Insulation: goose down.
|
|
|
FISKARS 5/8 In. Cut PTFE Coated Bypass Pruner Steel Durable Cutters Broken Parts
The handle does not spring open It gets stuck Still cuts Comes with picture items only
|
|
|
Chemglass Chromatography Column 24/40 Rodaviss Joint PTFE Stopcock Lot of 4
Chemglass Chromatography Columns Lot of 4 24/40 Rodaviss Joints PTFE Stopcocks 1 x ~18.50" from tip to tip- Small millimeter chip at end nosel 1 x ~18.50" from tip to tip 1 x ~16.50" from tip to tip. Fritted Disk C 1 x ~14.50" from tip to tip. Fritted Disk C Quantity- Lot of 4*Actual items pictured* Condition- Great clean condition. One millimeter chip on end of one out of the 4 columns. Otherwise no other chips or cracks. Very light scratches/marks. Actual items pictured. Used glassware may show signs of wear which may include residue or exterior markings. May need thorough cleaning and sterilization before use. RETURNS- This item has a 14 day return policy once delivered for a refund. Excluding shipping costs. The item must be returned in its original condition as it was sold. Buyer must contact us before returning item ... moreby email or phone with details of the return. Buyer pays for return shipping costs. ALL ITEMS ARE DESCRIBED TO THE BEST OF OUR ABILITY. PLEASE REFER TO PICTURES. ITEMS ARE FROM SURPLUS INVENTORY. PLEASE FEEL FREE TO CONTACT US IF YOU HAVE ANY QUESTIONS AND WE WILL DO OUR BEST TO ANSWER. WE ALWAYS SHOW THE ACTUAL ITEM BEING SHIPPED ON SINGLE ITEMS. IF MULTIPLE ITEMS ARE AVAILABLE– WE TAKE 1 PHOTO BUT ITEMS WILL BE IN SAME CONDITION AND ARE SAME ITEM. WE DO ASSUME THAT THE BUYER IS KNOWLEDGEABLE AND PROFICIENT IN THE USE OF THIS TYPE OF EQUIPMENT. Seller assumes no responsibility for damage or actions resulting from the use or misuse of the item sold. We are not an authorized dealer for any of the products that we list on eBay. We are not a party to any manufacturer's warranty that may or may not apply. Shipping: Local FREE Pick-Up Option in Carlsbad. CA USA and Temecula, CA USA. Please message for appointment. We do reuse boxes and packing materials to help keep the cost of shipping down. We ship Monday- Friday. We value your feedback and comments. If you are 100% satisfied. Please leave us a five star( positive feedb
|
|
|
ACE Glass 500mL Graduated Pressure-Equalizing Addition Funnel PTFE 24/40
500mL Graduated Pressure Equalizing Funnel. 24/40 Top, 24/40 bottom.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-147d04ef195-0x113-
|
|
|
Laboratory PTFE Stopcock, 2mm Bore, 8mm OD Sidearms, 11/25 Plug Size 85mm Length
Categories Other Pipetting Glassware Plasticware Lab Equipment Lab Bench Supplies Packing and Shipping Filtering Biotech Bargains specializes in the lowest prices on new old stock laboratory consumables and equipment. Forthcoming growth will greatly expand offerings. Laboratory PTFE Stopcock. 2mm Bore, 8mm OD Sidearms, 11/25 Plug Size 85mm Length Item: PTFE Straight Bore Stopcock. Stopcock Material: PTFE. Stopcock Bore: 2mm. Sidearm Outside Diameter: 8mm. Plug Size: 11/25. Approximate Overall Length: 85mm. $5 Flat Rate Shipping on All Orders! Use eBay Shopping Cart to combine items from multiple listings. Add unlimited items from our eBay store to this purchase for $0 additional shipping charges! Thanks for Looking! Payment via PayPal only is expected within 24 hours of purchase or invoice to ensure prompt packaging and shipping. If PayPal ... moreis not possible. Please inquire through the eBay message service. Items will ship according to the options set under the Shipping and Payments tab. While methods may vary among auctions. Every attempt is made to minimize shipping costs for customers. When purchasing multiple items, you can expect an invoice the same day with the least expensive shipping options offered. Expedited shipping is available; please inquire. Returns are accepted within 14 days of purchase for all items offered by Biotech Bargains. In the case of an item that does not match the description or is otherwise faulty. Return shipping will be provided. All other returns must be shipped back at the expense of the buyer. gsrx_vers_577(GS 6.7.5(577)
|
|
|
SET OF 4 STARNA CELLS, 10 MM QUARTZ, PTFE STOPPER, Useable Range: 170 to 2700 nm
2 USED. 2 NEW. I UNWRAPPED ONE OF THE NEW CELLS TO CHECK IT OUT. STARNA CATALOG NUMBER 1-Q-10. SET OF 4, MARKED‘7Q’ Window material: Spectrosil® Quartz or equivalent. Useable range: 170 to 2700 nm PATH LENGTH 10 mm EXTERIOR WIDTH 12.5 mm LENGTH 12.5 mm HEIGHT 45 mm INTERIOR WIDTH 10 mm INTERIOR LENGTH 10 mm NOMINAL VOLUME 3.500 ml NUMBER POLISHED WINDOWS 2 NEED MORE INFORMATION. PLEASE ASK. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
3 [THREE] CUVETTES, CELLS, PTFE STOPPERS, 10MM PL, 3.5ML ~1- Q ~ 1 -'5' ~ 1 - QS
3[THREE] CUVETTES. CELLS, PTFE STOPPERS, 10MM PL, 3.5ML VOLUME NO IDEA AS TO MANUFACTURE ALL 4 SIDES ARE CLEAR. PTFE STOPPERS. ALL 3 DIFFERENT. NO CHIPS OR CRACKS SEEN. ~ 1- Marked with'Q' ~ 1- Marked with'5' ~ 1- Marked with'QS' NEED MORE INFORMATION. PLEASE ASK.
|
|
|
Burkert 2000 A 13.0 PTFE RG 6316 PA6-GF30 Seat Valve
Burkert 2000 A 13.0 PTFE RG 6316 PA6-GF30 Seat Valve 2000 A 13.0 PTFE RG/ 6316 PA6-GF30 Item Condition: Used Quantity: 1 Unit Cosmetic Condition: 8 Functionality: Untested- Remarks: Actual Weight: 0.9Kg Dimension: 23x14x7- Comes with 14 days money back guarantee. We always strive to ship FAST via DHL worldwide(except for South America and Russia- see notes below) For single quantity listing. Winning bidder shall receive the actual item as shown. Accepts paypal and wire transfer payments only. Thank you. NOTE: Please note that upon paypal payment. Once the shipment address is provided, it will be best to provide your current phone number as well so we can write it down on the package. Locator: 140430-ATC. PB5101-30(1) PB5104-4(1) UNQ123 =================================================================================================================== ... moreTERMS AND CONDITIONS ON EACH SALE WARRANTY: All NIB(New-In-Box) NOB(New-Open-Box) and NNB(New-No-Box) comes with 14-days money back guarantee. All"USED" equipment had been tested and are guaranteed functional. Also comes with 14-days money back guarantee. All items that are declared"AS IS" have no warranty.No returns, and no refund. SHIPPING(DHL) In our quest to have the item arrived to you the soonest. We subsidize some of the shipping cost and make DHL as our standard courier. We send tracking number after each shipment. If we miss it. Please do not hesitate to send us a message. DHL shipping normally takes 2 to 5 working days to most worldwide destinations. Due to very high customs charges. We discourage DHL shipping to South American countries( Brazil,Ecuador, etc. and propose to use AIR PARCEL shipping instead. However, if you badly need the item and customs charges will not be a problem, we can still ship via DHL
|
|
|
STOPCOCK PLUGS, Teflon, PTFE, 2 mm Bore, 11/24, Straight Bore, LOT OF 7
PTFE/Teflon® Stopcock Plugs Straight Bore General Description A set of 7 replacement PTFE plugs. The bore diameters are about 2 mm. All are probably used. But in very good to excellent condition. Six plugs each include the white washer. Black o-ring and lock nut. One plug has only the white washer. Purchased new. The six complete plugs would cost about $330. With stopcock plugs there are often body size variations within a given bore diameter. So be sure to check dimensions below to see if the other attributes are compatible with your glassware. Aligning the bores. As well as ensuring the taper has the same dimensions as your plug housing is critical. The bore centers are about 12.5 mm from the top of the taper. See the tables below for taper dimensions. Product Details Taper Length ~24 mm Diameter at narrow end of taper ~9 mm Diameter ... moreat wide end of taper ~13.5 mm Diameter near middle of the taper ~11 mm Shipping See the shipping calculator for the cost to ship this item alone. Will be packaged in a new 200 lb. burst test shipping box. Insurance is included in the shipping calculator total. Insurance: Items will be professionally insured by a reputable 3rd party insurer. With USPS. All orders $20 and over in value will have insurance automatically included in the checkout/invoice total. With UPS, all shipments valued at $100 or less are insured by UPS. We will add insurance from the same 3rd party insurer for any UPS shipment exceeding $100 in value. Third party insurance is much less expensive than insuring through the shipping companies and we pass the savings on to you. Combined Shipping: When quantities greater than one are entered into a listing's shipping calculator. It will likely display a shipping charge that is higher than what will actually be charged. This overage may also appear during checkout with purchases of more than one item of the same item number. As well as multiple item number orders, if payment is made before an invoice is emailed. This happens because the system adds all the wei
|
|
|
Hamilton Gastight glass syringe 5 mL PTFE plunger
Hamilton brand Gastight glass syringe with PTFE plunger. Excellent condition; lightly used; no visible wear. Capacity is 5 mL with 0.05 mL gradations. Comes in original box with insert. Please check out my other lab supplies and glassware. Thanks for looking! 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-147f021e1d8-0x10e-
|
|
|
W.L GORE & ASSOC GORE-TEX GASKET EXPANDED PTFE SE TAPE (TWO PARTIAL ROLLS 30ft+)
W.L GORE& ASSOC GORE-TEX GASKET TAPE EXPANDED PTFE SE TAPE(TWO PARTIAL ROLLS APPROX 30FT) Check out my!
|
|
|
Teflon PTFE Solid Cylindrical Cylinder 12"x6"
Your bidding on Teflon PTFE Solid Cylindrical Cylinder 12"x6" Please look at the pictures. the picture are from the actual item your bidding on) It looks in Great Shape. No Further test were conducted. You will get the following item(s) Teflon PTFE Solid Cylindrical Cylinder 12"x6" ALL SALES ARE FINAL. No Returns Accepted. If you have Any Question please feel free to contact us. Shipping: Domestic: Our items are ship via UPS. USPS and/or FedEx within the United States. Any item that exceed $80 in value will be ship via UPS. No exceptions. Charges are calculated by eBay based on the destination + weight + dimensions of the package. Items will ship within 3 business days after payment clears. International: We usually ship via UPS. USPS and/or FedEx, depending on the destination country. Charges are calculated by eBay base ... moreon the destination + weight + dimensions of the package. Please include a contact phone number for shipping purposes. We will attempt to combine shipping wherever possible. Items is available for Local Pickup. However an appointment is required. Local Pickup's requires the payment to be done in Cash Only; this is done to comply with eBay and PayPal Protection Policies. Payment: Domestic: PayPal. Wire Transfer, Credit Card via PayPal(Visa/MC) All transaction must clear before the item is ship. Unsecured funds must clear prior to shipment. International: PayPal or Wire Transfer only(US dollar only) Duties Taxes are the buyer's responsibility. No credit card purchases are accepted. Sales Tax: Charged to all Arizona Purchases unless a physical copy of a valid tax exemption certificate is provided. Payment must be received within 48 hours of listing ending. Terms and Conditions: Your bid and/or your purchase is a contract. Once you have placed a bid and/or purchase an item. You have entered a legally binding contract to purchase the item if you are high bidder at
|
|
|
2 LOT FURON PP4-1 Spray Gun Nitrogen N2 & DI Water Teflon PTFE Clean Room
2 LOT FURON PP4-1 Spray Gun Nitrogen N2& DI Water Teflon PTFE Clean Room Search Click to see supersized image Click to see supersized image Click to see supersized image LOT of TWO used FURON PP4-1 Spray Gun for Nitrogen N2 and DI Water made of Teflon/ PTFE for use in a Clean Room. I'm not sure if these are for N2 or DI water or both. Please see pictures for complete item details. No manuals. Cords/cables, or additional items are included if not listed or shown. If you experience a problem please contact us FIRST. We strive to do our best to work with customers to resolve issues. WE COMBINE SHIPPING! BY BIDDING. YOU ACKNOWLEDGE YOU HAVE READ, UNDERSTAND, AND AGREE TO OUR TERMS OF SALE—ALL SALES ARE FINAL! Payment for items is expected to take place through PayPal and within 48 hours of the auction end date. Between auction end and ... morethe end of the payment period. BRING will hold the item in the interest of the winning bidder. However, transfer of ownership from BRING to the winning bidder does not take place until the payment has completed, and if payment has still not been completed after 4 days, it is BRING's sole discretion whether or not to re-list the item, offer it to the next highest bidder, or retain ownership. Additionally. If payment has not been received by the end of 4 days, an Unpaid Item Dispute will be posted to the buyers account. If payment has still not been received within 8 days from the auction end date, The Unpaid Item Dispute will become permanent on the buyers account. All items are shipped through USPS. When payment is completed by 1:00 PM Thursday. Items will ship that afternoon. Payments completed over the weekend will ship the following Monday afternoon. THIS IS IMPORTANT! We are a recycling facility! All items for sale have gone through our receiving and processing department. And are to be considered in used condition. As such, they may contain cosmetic and/or functional impairment. BRING Recycling will strive for thoroughness during pre-sale item inspection and attempt to
|
|
|
PTFE Open Mesh Fiberglass Dryer Conveyor Belt 16" Wide 20' Long Silcone Edge
574-825-4990 SKU: 53157 PTFE Open Mesh Fiberglass Dryer Conveyor Belt 16" Wide 20' Long Silcone Edge. Condition: Used Country of Manufacture: Unknown Consigner: C Items in Lot: 1 Lister: 4 Weight(lbs. Oz) 5.0 Belt has one splice at approx. 7' CONTACT INFO Contact us Monday- Friday 8am-5pm EST with any questions. BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: sales@bullseyeindustrialsales.net Bullseye Industrial Sales is your leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at 574-825-4990. Paypal. Credit Card, Wire Transfer in USD, Company ... moreCheck, Personal Check. If purchase is paid for with check item will not ship until check clears. Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS. UPS& Fedex. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO BUY THEN BEFORE YOU PAY. Call us and we will send you an invoice with combined shipping. If you are not satisfied w
|
|
|
12ea Heavy Wall Class A Volumetric Flask 100mL w/PTFE Stopper
12ea Heavy Wall Class A Volumetric Flask 100mL w/PTFE Stopper Kontes& Pyrex Flat UPS ground insured shipping in the CONTUS $16.50 No combinations on shipping glass
|
|
|
Cole-Parmer MasterFlex L/S (7523-70) Digital Pump w/ 77390-00 PTFE Head
800x600 Cole-Parmer Instrument Company MasterFlex L/S Digital Standard Drive Pump w/ 77390-00 PTFE Tubing Pump Head Description: This auction is for a digital pump made by Cole-Parmer. This unit powers on and responds to all controls. But no calibration has been done. The unit comes with the power cord and a 77390-00 PTFE tubing pump head. The exterior plastic has staining. But there is no damage to the control panel. Specs: Make: Cole-Parmer Instrument Company-Model: MasterFlex L/S Digital Standard Drive Pump-Part No: 7523-70-Type: Peristaltic-RPM: 1.6-100-Power: 0.1 HP-Pump Head: 77390-00 PTFE Tubing The unit in the pictures is the exact model and form as the one you will be receiving. If you have any questions. Please ask and I will do my best to answer them. Good luck. Shipping: The item will be packaged carefully and will weigh around ... more18 pounds with packing material. If we can. We will combine shipping on multiple items to save cost. We use both UPS and USPS for shipments. For international shipments: the postage calculator in eBay does not take into account parcel size and may not be accurate so please wait for our invoice which will reflect the actual cost of shipping the item. All shipments are insured and the cost is automatically added to the shipping charge. We do not ship damaged boxes. If a box arrives damaged and the item broken. Email us immediately and a claim will be filed and you will be refunded. The USPS consistently damages or loses items. Regardless of our packaging, so please tell us as soon as possible. We cannot resolve a problem unless it is reported to us in a timely fashion. Local pickup can be arranged and is highly recommended for heavier items. Contact us and we can schedule a time to have the item available at our facility. Payment: Payments must be in the form of Paypal. If you have less than 10 feedback. Please email us to confirm that you intend to pay. Payment within 48 hours of item ending ensures that your item is shipped within 1-2 business days of payment. An
|
|
|
Teflon PTFE stopcock assembly blue (4 mm)
Blue(4 mm size) PTFE stopcock assembly. All pieces included. Lightly used and in excellent condition; no stains. Please check out my other lab supplies. Thanks for looking!
|
|
|
C110919 White Knight PL120 PTFE/PFA Pneumatic Ultra-High Purity Chemical Pump
Click to Enlarge) Product ID# C110919 This White Knight Renaissance PL120 PTFE/PFA Pneumatic Ultra-High Purity Chemical Pump(120 liters per minute) looks to be in very good cosmetic condition. And appears to be unused. However, I have no way of testing it, and it is being sold as-is. Approximate overall unpacked dimensions: 13"L x 13"W x 9"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 71 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted ... morebased on winning bidders shipping address. The unpacked weight of this item is 40 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California and Texas Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa Clara County, the current basic state tax rate applies. For all Texas orders, the rate of 8.25% will be applied. Orders will be placed on hold for non-paym
|
|
|
CHEM OIL SPV8F8FT 10000 psi at 200f PTFE
$38 each or best offer($38 x 5) SOLD AS IS-Ask/Comment about anything BEFORE payment-We are a Fittings and Valves Surplus Warehouse. It's more than likely that we have more than one of this item(New or Used) if you have a list of items that you are looking for. You may send me a message and I'll see if I have them in stock* SHIPPING-Default shipping is UPS. if you want USPS. Please ask BEFORE payment) Can combine ship if buying more than one Auction/Fixed Price item. Please wait for me to send an invoice with new shipping amount BEFORE PAYING FOR EACH AUCTION ITEM RETURN POLICY If item is defective or damaged. Send it back within 14 days of purchase. Customer pays for own shipping to return item. A full refund will be given to customer.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14823bcf537-0x10d-
|
|
|
Cole Parmer Masterflex 7520 60 Console Drive W/ 77390 00 PTFE Tubing Pump
Cole Parmer Masterflex 7520 60 Console Drive W/ 77390 00 PTFE Tubing Pump This item power-up ok. But the tubing pump has a bent adjustment nob and it shows it in Picture#3, and it comes with our 30 days warranty. Please read the following terms of sale carefully. These terms constitute a legally binding agreement( contract) between the seller and buyer. By bidding on. Or purchasing, the product posted in this eBay listing, the winning bidder agrees to and accepts all of the terms of sale stated below. TERMS OF SALE: Only what is shown in the eBay photo and mentioned in the listing is included. Anything else should be understood to not be included. For sale is for the eBay item only. No service or tech support are included, but if you have a question feel free to ask and we'll answer if we can. All sales are final. Please understand that ... morethis is an auction/liquidation environment, not a retail store, so make sure the item is right for you, before bidding. PAYMENT: We accept payment by Paypal. And we only ship to the address which the buyer provides within the Paypal payment, no exceptions. If you would like to pay with a non-Paypal payment method. Please contact us before bidding to see if we can arrange something. Buyers are given 7 days from winning bid to pay. And payment is expected of all winning bidders If no payment is made within 7 days. An unpaid item reminder will be filed with eBay, and the buyer forfeits the auction win. We are required by state law to collect sales tax on all items shipping to a CA address. CA sales tax may be waived at our discretion. But only with a valid CA resale certificate- please contact us for resale exception*before* sending payment. DOMESTIC(US) SHIPPING: Local pickup is normally not available; exceptions are sometimes made. But only for higher-value orders. Please contact us first to see if we can make this arrangement for you, don't assume that we will be able to. We charge flat-rate shipping. And there is no extra cost to ship to AK, HI, PR, or PO boxes, these are
|
|
|
ACE GLASS 250mL Pressure Equalizing Addition Funnel PTFE Valve 24/40 Graduated
Ace Glass 250ml Addition Funnel with pressure equalizing tube 24/40 joints on top and bottom. With dropping tube inside the bottom joint PTFE Plug(included) capacity: 250ml Graduated Used Made in USA Check out my! 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14827889566-0x106-
|
|
|
.125" X 5.19" X 8.44" White Color PTFE Sheet TFE Plastic Panel
This is a piece of teflon sheet. The size is.125 X 5.19 X 8.44. There is a couple of marks on it as you can see in the photos. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1482b65f0cf-0xe3-
|
|
|
Laboratory Lab Magnetic Stir Bar ( Lot of 17 ) PTFE Stir Bar Kit W/ Case
Magnetic Stir Bar PTFE W/ Pivot Ring( Lot of 17) 2.5"3/4"1"1/2" Stir Bar Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Laboratory Lab Magnetic Stir Bar PTFE ( Lot of 75 ) 1 3/4",1 1/2",1",1/2" W/Case
Magnetic Stri Bar Set PTFE( Lot of 75) W/ Case Contains: 1-1 3/4" Long 1-1 1/2" 49-1" 24-1/2" Note: 1 of the 1" Stir Bars is Brown) Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Laboratory Lab Magnetic Stir Bar ( Lot of 16 ) 3",2",1.5",1",1/2" PTFE Stir Bar
Laboratory Lab Magnetic Stir Bar( Lot of 16) PTFE Stir Bar Kit W/ Case. Contains: 1-3" Long 1-2" 3-1.5" 5-1/2" 6-1" Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14833f0d8e2-0x100-
|
|
|
Chemglass Continuous Liquid Extractor 45/50 & 24/40 w/ 2mm PTFE Stopcock
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE ... moreNormal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE For sale is one used Chemglass Continuous Liquid Extractor. May be CG-1364 but it is not marked as such. For samples of 1 liter plus approximately 200mL of extracting solvent. Extractor has a 45/50 top outer joint and a 24/40 inner joint on the uptake tube. In very good used condition with no chips or cracks. Normal 0 false false false EN-US X-NONE X-NONE If you have any questions. Please email us before you buy. We are happy to combine shipping when feasible; click on the“Red Door” icon to enter our ebay store for more great deals! We are using the eBay shipping calculator to offer a fair shipping cost to this item. To make sure you are getting an accurate quote via the eBay shipping calculator. Make sure your zip code is the default zip code when calculating the shipping cost for this item. Changes to payment methods, expected payment dates, shipping method or price of shipping and handling cannot be negotiated after you ha ve bought this item. Loc J)J-ext We welcome international trade. Import duties. Taxes and charges are not incl
|
|
|
Kontes Glass 250mL Addition Funnel 24/40 Drip Tip, 24/25 Stopper, 2mm PTFE Stpck
Kontes Glass 250mL Addition Funnel 24/40 Drip Tip. 24/25 Stopper, 2mm PTFE Stopcock Brand: Kontes Part# 633031-0250 Capacity: 250mL Total Length: 12.5" Stopcock Bore Size: 2mm Sopcock Material: PTFE Teflon Bottom Joint Size/Type: 24/40 drip tip Top Stopper Size: 24/25(stopper not included) Use eBay Shopping Cart to combine items from multiple listings. Thanks for Looking! Payment via PayPal only is expected within 24 hours of purchase or invoice to ensure prompt packaging and shipping. If PayPal is not possible. Please inquire through the eBay message service. Shipping items will ship according to the options set under the Shipping and Payments tab. While methods may vary among auctions. Every attempt is made to minimize shipping costs for customers. When purchasing multiple items, you can expect an invoice the same day with the least ... moreexpensive shipping options offered. Expedited shipping is available; please inquire. Returns are accepted within 14 days of purchase for all items offered by Biotech Bargains. In the case of an item that does not match the description or is otherwise faulty. Return shipping will be provided. All other returns must be shipped back at the expense of the buyer.
|
|
|
Kontes 1000ml Graduated Addition Funnel, PTFE Stopcock With #24 Glass Stopper
Kontes 1 000ml Graduated Addition Funnel with Glass Stopper Great Glassware! Up for Auction here is a Kontes 1000ml Addition Funnel with a 24/25 joint. This is a great piece in great shape. Other than a coupe very light scratches that are barely noticeable is looks great There is also a EXTREMELY small chip on the drip tip(pictured) but it is very small and can really only be felt. I am also including the#24/40 glass stopper as well. Your really can't go wrong! Take a look at the pictures. This is the exact one that you will be receiving. Thanks! Shipping on this item will be $10.95. I personally pack these the best I can so you will receive them in the same shape they are in the pictures. I bubble wrap everything! Please note that for the time being I will only be shipping on Fridays due to a busy work schedule. Thanks for understanding. ... moreI appreciate it! I only ship to the Continental United States. I have had trouble shipping items out of the country in the past so I prefer to only ship in the United States. You are bidding on laboratory equipment which can be used in chemical and laboratory processes which are potentially dangerous. It is your sole responsibility as the buyer to judge the safety of a given procedure and to assess the compatibility of any lab items with the given procedure and as such the seller shall not be held liable for damage. Injury, or any other loss that may occur from the use of any product purchased. By your purchase of this equipment you are agreeing to hold harmless the seller and ebay in any event of accident, injury, damage, or loss that may arise, under any circumstance, from use of said lab items. These items are sold“as is” unless for some reason I have mislabeled them. I do the best I can in order to give an accurate description as I can. I want you to be happy with what you are getting! Thanks!
|
|
|
Kontes Glass 500mL Addition Funnel PTFE Stopcock, 24/25 Stopper, 24/40 Joint
Kontes Glass 500mL Addition Funnel PTFE Stopcock. 24/25 Stopper, 24/40 Joint Brand: Kontes Part# 186-633031-0500 Height: 355mm(14" Capacity: 500mL Material: Glass Stopcock Bore Size: 4mm Sopcock Material: PTFE Teflon Top Stopper Joint Size: 24/25 hex(not included) Bottom Joint Size: 24/40 Use eBay Shopping Cart to combine items from multiple listings. Thanks for Looking! Payment via PayPal only is expected within 24 hours of purchase or invoice to ensure prompt packaging and shipping. If PayPal is not possible. Please inquire through the eBay message service. Shipping items will ship according to the options set under the Shipping and Payments tab. While methods may vary among auctions. Every attempt is made to minimize shipping costs for customers. When purchasing multiple items, you can expect an invoice the same day with the least ... moreexpensive shipping options offered. Expedited shipping is available; please inquire. Returns are accepted within 14 days of purchase for all items offered by Biotech Bargains. In the case of an item that does not match the description or is otherwise faulty. Return shipping will be provided. All other returns must be shipped back at the expense of the buyer. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1483f7228e6-0x112-
|
|
|
Barnant 7090-4 PTFE Diaphragm Pump / Laboratory Pump
Your purchase is 100% guaranteed. If you are not happy with your purchase for any reason. Please contact us BEFORE leaving feedback. Starting dispute, or starting return through ebay/paypal. We provide easy return solutions if you are not fully satisfied. You can reach us at hurstassoc gmail or 515-708-3332. Barnant 7090-4 PTFE Diaphragm Pump/ Laboratory Pump Barnant 7090-4 PTFE Diaphragm Pump. Working condition. As pictured. 30 day warranty. About our Feedback: Please do leave us good feedback on all our categories. Unfortunately. Ebay has made it more difficult for smaller sellers and so anything less than perfect actually counts against a seller. Please let us know if there is anything we can do to accomodate so you can provide us with top ratings on all our categories! If there are any problems or questions, please do not hesitate to ... moreask! Powered by SixBit's eCommerce Solution
|
|
|
S2B9 Welch DryFast Dry Diaphragm PTFE 115V Vacuum Pump 2012b-01 Used
Item was turned on and has good compression. It has not been check for actual pumping ability.
|
|
|
1-1/2" Resistoflex Resistopure SS Smooth PTFE Tri-Clamp Braided Hose 22.5" Long
1-1/2" Resistoflex Resistopure SS Smooth PTFE Tri-Clamp Braided Hose Used. In Very Good Conditio n 316L Sanitary Stainless Approx. 22-1/2" Long Pipe Size: 1-1/2" Tri Clamp Sizes: 1-1/2" Construction: Natural smooth bore Teflon® PTFE liner. Flared through a platinum cured stainless steel wire and fabric reinforced silicone shell, creating uninterrupted product contact surface. Compliant with: All components compliant with USP Class VI All components compliant with USP MEM Elution Test FDA 21 CFR 177.1550 FDA 21 CFR 177.2600 ASME BPE Benefits: Zero entrapment potential Maximum drainability Minimal absorption Extended SIP life cycle Fully traceable to raw materials True sanitary I.D. dimensions Lightweight and flexible Low cost of ownership Fittings meet 3A. VNE. BPE and AMSE specifications THIS PRODUCT IS SANITARY FOR ... moreUSE IN BEER. FOOD, BEVERAGE, DAIRY, AND PHARMACEUTICAL APPLICATIONS, etc. We Accept: Pay Pal. Company/Personal check, checks will take a few days to clear. If for any reason you are not satisfied with your purchase. Please return it within 14 days of the date of receiving the item for a full refund including return shipping costs. Please email with questions. THANK YOU FOR YOUR INTEREST TL-RP1.5/22.5
|
|
|
2" Resistopure SS Silicone PTFE Tri-Clamp Braided Flex Hose Pipe 23.5" Long
2" Resistoflex Resistopure SS Smooth PTFE Tri-Clamp Braided Hose Used. In Very Good Conditio n 316L Sanitary Stainless Tri Clamp Ends Approx. 23-1/2" Long Pipe Size: 2" Tri Clamp Sizes: 2" Construction: Natural smooth bore Teflon® PTFE liner. Flared through a platinum cured stainless steel wire and fabric reinforced silicone shell, creating uninterrupted product contact surface. Compliant with: All components compliant with USP Class VI All components compliant with USP MEM Elution Test FDA 21 CFR 177.1550 FDA 21 CFR 177.2600 ASME BPE Benefits: Zero entrapment potential Maximum drainability Minimal absorption Extended SIP life cycle Fully traceable to raw materials True sanitary I.D. dimensions Lightweight and flexible Low cost of ownership Fittings meet 3A. VNE. BPE and AMSE specifications THIS PRODUCT IS SANITARY ... moreFOR USE IN BEER. FOOD, BEVERAGE, DAIRY, AND PHARMACEUTICAL APPLICATIONS, etc. We Accept: Pay Pal. Company/Personal check, checks will take a few days to clear. If for any reason you are not satisfied with your purchase. Please return it within 14 days of the date of receiving the item for a full refund including return shipping costs. Please email with questions. THANK YOU FOR YOUR INTEREST TL-RP2/23.5
|
|
|
HAMLET * 3/8" 5000 PSI FLOW CONTROL VALVE * R-PTFE/H-300
Concepts Industrial HAMLET* 3/8' 5000 PSI FLOW CONTROL VALVE* R-PTFE/H-300 C2-DH SW1 9/11/14 MA We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Shipping prices are as stated in the auction and is standard to all buyers. We combine shipments when applicable. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule. Please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. Items that are listed as parts only/ not working are sold as is and no returns will be accepted. Please ask any questions before purchasing item(s) Returns are only accepted for items that are D.O.A. or damaged. ... moreReturn policy DOES NOT cover items that are SOLD AS IS or DO NOT KNOW THE HISTORY OF. Please remember that our return policy is ONLY for FOURTEEN(14) DAYS. We will NOT accept anything after FOURTEEN(14) DAYS after item has been received without prior written approval. Customer Service is available to Answer Your Questions M-F 8:00am- 4:30pm EST We are closed on Saturday and Sunday but respond to all messages promptly during business hours! On Sep-11-14 at 09:14:44 PDT. Seller added the following information:
|
|
|
Vintage Laboratory Separatory Separation Funnel, 150ML?, Needs PTFE Stopcock SF1
150? ml Separatory Funnel. Unmarked, This was obtained from a laboratory that went out of business. This is an unmarked separatory funnel with the following specific characteristics and measurements: 150 ml( based on a comparison with other funnels. Since this is unmarked) Size 22 ground glass stopper top. Hole for PTFE Stopcock. 8.5mm on one end, 13mm on other(stopcock not included) 5mm bottom tube. Overall length of 9.5 inches. Max Width about 2.5 inches. Item SF01. Buyer pays for shipping in accordance with the ebay calculator. And I will combine shipping for items purchased within a day of each other and if paid for in one single Paypal payment. Please wait for a combined invoice in that case. THANKS FOR LOOKING! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-148688b349a-0x111-
|
|
|
lot of 17 Pyrex & Kimax Separatory Squibb Funnels & PTFE Stopcocks Lab Worldwide
lot of 17 Pyrex& Kimax Separatory Squibb Funnels& PTFE Stopcocks Lab Worldwide Offered: lot of 17 Kimax and Pyrex separatory lab funnels. 14 units w/ PTFE stopcocks: 1) Pyrex 500ml funnel w/ 3) Pyrex 125ml funnels(1) Kimax 125ml funnel(8) Pyrex 60ml funnels(1) Chemglass 50ml funnel(3) Pyrex 30ml funnels All pieces are in very good condition- No chips or cracks. Funnels are clean. A few have slight residue marks. Will receive exact funnels and stopcocks as dispayed. Please note PTFE stopcocks have PTFE gaskets& rubber gaskets(4 stop-cocks don't have the black rubber gasket.
|
|
|
O-Ring, PTFE, AS568A-129, Round, PK 5
Click to close full size. Approved Vendor. O-Ring. PTFE, AS568A-129, Round, PK 5. Model: 1RGF9. SKU: 406274. Price: US $18.57. Description. O-Ring. PTFE, AS568A Dash Number 129, Fractional Width 3/32" Actual Width 0.103" Color White, Cross Section Shape Round, Inside Dia. 1-9/16" Actual Inside Dia. 1.549" Outside Dia. 1-3/4" Radius- Axial Thickness- Thickness- Durometer Rating Very Hard, Durometer 55 Shore D, Temp. Range-100F to +500F, Meets/Exceeds- Includes- Package Quantity 5 RestrictionsNote: Polyurethane and FEP encapsulated O-rings with silicone or Viton are also available; on DrillSpot.com, search for"polyurethane O-rings" FEP encapsulated with silicone O-rings" or"FEP encapsulated with Viton O-rings. PTFE and Neoprene O-RingsRound cross-section.Neoprene O-rings meet SAE J200 and ASTM D2000 ... morestandards.PTFE operating temp. 100 to 500 F Neoprene operating temp. 40 to 275 F. Frooition www.frooition.com | eBay design. EBay store design, eBay shop design, eBay template design, eBay listing design. This listing is currently undergoing maintenance. We apologise for any inconvenience caused.
|
|
|
POLY TEMP JOINT PTFE Joint Sealant 1/4"X50' Anti Seize A Technology
POLY TEMP JOINT PTFE Joint Sealant 1/4"X50' Anti Seize A Technology Please Note The Following: Actual Picture: Condition: POLY TEMP JOINT PTFE Joint Sealant 1/4"X50' Anti Seize A Technology unit appears to be unused in mostly original packaging. I am not an expert on this product to know what a brand new roll would look like or amount that needs to be on the roll. Might be used) 1. Fast shipping. 2. If you have any questions regarding this item. Please contact me_before_ bidding. Expedited shipping can be arranged upon request. Other Notes of Interest. S&H: Multiple items purchased will be considered for discounted shipping. Shipments: All items will ship within 1 day of payment receipt. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges ... moreare the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
|
|
|
Reliable J40T / J45T Non-Stick PTFE Shoe for J Series Irons
PROFESSIONAL IRONING SHOE• This ironing shoes is made from heavy-duty aluminum with.6 mm PTFE. And are riveted for extra strength. A felt insert ensures a snug fit. The shoe provides a layer of insulation between the irons soleplate, and the fabric. PREVENTS SHINE• A Reliable ironing shoe reduces the temperature on the fabric, ensuring a proper finish to the material, and eliminating the risk of shine. The smooth PTFE allows the iron to glide over the fabric, making ironing easier. 6 MM THICKNESS• Reliable brand ironing shoes use an industry best.6 mm PTFE to ensure long life and to create an effective heat barrier. PERFECT FIT• Our iron shoes are made to fit Reliable irons perfectly, with a secure and snug fit. FEATURES• Fits J420, J450A and J490A iron station models. Product Dimensions: 10x0.5x6 inches
|
|
|
HTM ECS1-1204P-ARU4-PTFE POXIMITY SENSOR *USED*
Proximity Sensor Welcome to our eBay store! Please check out our eBay Store to review all of our available inventory! To make your purchase as simple and easy as possible. Please refer to the store policies listed below. After completing a Buy It Now purchase. You have two check-out options: Check-Out Now! Click the Pay Now button at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase. Check-Out Later If you do not choose to Check-Out now. You will be notified by eBay via e-mail that you are the winning bidder. There is no need to contact us to arrange payment. We will automatically send you an e-mail within three hours of an auction closing. Our message will contain a link to our simple and ... moresecure checkout system, where you will be able to quickly and conveniently pay for your purchase. Payment We accept the following forms of payment. PayPal Sales Tax For shipments to California addresses. We are required by State law to collect 7.5% Sales Tax. Shipping We offer a variety of shipping options. Including free shipping- please review the shipping tab for the item to see all of the available options. Customer Service FOR ANY QUESTIONS BEFORE BUYING THIS PARTICULAR ITEM. PLEASE CALL US AT 805-531-9523. We do our best to describe each item accurately. If an item arrives damaged or described incorrectly described. We will work with you to resolve the situation. We only accept returns on items that do not work upon receiving them. We do not accept returns because the wrong item was purchased or the buyer has changed their mind. You must let us know within 14 days of receiving the item to receive a refund. OUR GOAL IS TO ALWAYS ACHIEVE 100% CUSTOMER SATISFACTION Location: Z51H-1(AT) AT
|
|
|
STARNA CELL, 10 MM QUARTZ, PTFE STOPPER,CUVETTE, SPECTROPHOTOMETER
STARNA CELL. 10 MM QUARTZ, PTFE STOPPER STARNA CATALOG NUMBER 1-Q-10 Window Material: Spectrosil® Quartz or equivalent. Useable range: 170 to 2700nm PATH LENGTH 10 mm EXTERIOR WIDTH 12.5 mm LENGTH 12.5 mm HEIGHT 45 mm INTERIOR WIDTH 10 mm INTERIOR LENGTH 10 mm NOMINAL VOLUME 3.500 ml NUMBER POLISHED WINDOWS 2 PHOTOS SHOW ALL SIDES. NO CHIPS, CRACKS I CAN SEE NEED MORE INFORMATION. PLEASE ASK. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
Masterflex Console Drive Peristaltic Pump Model 77521-40 w/Head 7090-42 PTFE
Masterflex Console Drive Peristaltic Pump Model 77521-40 w/ Head 7090-42 THIS UNIT IS USED BUT IN EXCELLENT WORKING CONDITION. CHECK OUT MY OTHER ITEMS THANK YOU g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-148b9aee5a6-0x10a-
|
|
|
Dynalon Extra Large Stir Bar, PTFE, 27 x 108 mm (1 1/16 x 6¼")
Dynalon Extra Large Stir Bar. PTFE, 27 x 108 mm(1 1/16 x 6 ¼" Extra large polygonal stir bar for use in very large containers. Powerful permanent Alnico V magnetic core. PTFE has excellent chemical resistance and can be used up to 260°C. List price $124. RETURNS& WARRANTY: This item comes with a fourteen(14) calendar day. Full return privilege after delivery. An instrument can be returned for any reason within the 14-Day Right-of-Return period for a refund, excluding shipping costs. A purchased item may only be returned with an RMA(Return Material Authorization) number. To obtain an RMA number, simply contact us either by phone, by FAX or by e-mail with details of the return. One of your best warranties is knowing whom you're doing business with. Please click on the"ME" icon for more information. TECHNICAL ... moreSUPPORT: For any questions feel free to email and we will do our best to respond however. No technical support will be provided by the seller. All statements regarding products and their configuration are made to the best of our ability, and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. Unless specifically stated, power cords, software, manuals, etc. are NOT included. International Bidders welcome! Internationales Bewerber Willkommen! Bienvenue aux acheteurs internationale! Internationaal biedersonthaal Ofertantes internacionales bienvenida Internasjonale bidders velkomme SHIPPING& HANDLING: Buyer is responsible for all shipping costs. All items are professionally packed to arrive undamaged. UPS is our standard shipping carrier worldwide. On international orders we try to ship via the mail. But please be aware that there are size restrictions that may make it impossible to ship via the mail. USPS surface and airmail are not traceable outside the USA even if you insure it. Once shipped we are not responsible for what happens to it. All claims for lost or broken items must be handled by the buyer. I will gladly ship vi
|
|
|
SWAGELOK Barrel end Micro-Fit 6L-VV SS 1/2" PTFE 316 VIH & 316 WRC NPT *custom*
Custom welded Swagelok SS braided line with elbow and barrel connector. Approx. 13.25" long. I have no knowledge of how it was implemented-most likely used for a hydraulic or fuel line. Very stout for H-Duty or Hi-Press as are all SWAGELOK components. Valve and hose shop in town quoted $375+ tax for no-name. In-house parts w/ TIG welds for similar piece. Please ask if you have any questions. Thanks for looking.
|
|
|
250ML Squibb Seperatory Funnel Pyrex #6404 #22 W/ PTFE Stopper & Stopcock Qty:1
Squibb Seperatory Funnel 250ML Pyrex#6404 Stopper W/ PTFE Stopper& Stopcock Qty:1 Powered by The free listing tool. List your items fast and easy and manage your active items. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-148d8b19cff-0x109-
|
|
|
NRESEARCH 225T011 PTFE ISOLATION VALVE 12VDC 30 PSI 2-WAY
USED- NRESEARCH 225T021 PTFE ISOLATION VALVE 12VDC 30 PSI 2-WAY Good condition. Some may have short 2-3 inch leads. These were removed from functioning equipment. Link to specification sheet- I will be on vacation from July 17th until July 22nd. If you purchase between now and then shipping will be delayed.
|
|
|
NRESEARCH 225T031 PTFE ISOLATION VALVE 12VDC 30 PSI 3-WAY
USED- NRESEARCH 225T031 PTFE ISOLATION VALVE 12VDC 30 PSI 3-WAY Good condition. Some may have short 2-3 inch leads. These were removed from functioning equipment. Link to specification sheet-
|
|
|
LAB GLASS 90° Bend Vacuum Hose Inlet Flow Control Adapter 19/38 Joint PTFE Plug
Categories Other Glassware Flasks Erlenmeyer Flasks Spinner Flasks Round Bottom Flasks Recovery Evaporating Flasks Receiving Flasks Fernbach-Style Culture Flasks Delong Neck/Shaker Flasks Pear-Shaped Flasks Volumetric Flasks Filter Flasks Freeze Dry Flasks Flat Bottom Boiling Flasks Buchi Baffled Drying Flasks Beakers Low Form Griffin Beakers Tall Form Berzelius Beakers Water-Jacketed Beakers Media Storage Bottles Vials Graduated Cylinders Crystallizing Dishes Filtration Apparatus Aspirator Bottles Rotary Evaporator Bump Traps Homogenizers. Mortar& Pestle Dounce Tissue Grinders Ceramic Mortars and Pestles HPLC Reservoirs Well Plates Funnels Glass Filling Funnels Glass Powder Addition Funnels Addition Funnels Separatory Funnels Glass Buchner Filter Funnels Buchner Vacuum Filter Funnels Solvent Pouring Chrom. Funnels Porcelain Buchner Funnels ... morePorcelain Hirsch Filter Funnel Slide Staining Jars Dishes Centrifuge Tubes TLC Developing Chambers Adapters Vacuum Filtration Adapters Vacuum Take Off Adapters Reducing Connectors/Bushings Enlarging Connectors Vacuum/Hose Inlet Adapters Chromatography Flow Control Rotovap Vial Sampling Adapters Ace-Thred Connecting Adapters Distilling Connecting Adapters Condensers/Distillation Liebig Condensers Vigreux Columns Condensers Reflux Condensers Drying Tubes Distilling Receivers Kugelrohr Distilling Bulbs Chromatography Columns Chromatography Reservoirs Buchi Vapor Ducts Buchi Condensers Pressure Vessels and Tubes Consumables Culture Tubes Lab Equipment Magnetic Stir Bars Stainless Steel Lab Tools Polyurethane Ice Buckets Lab Supplies Microscope Slides Microscope Cover Glass Slips Plasticware Biotech Bargains specializes in the lowest prices on new old stock laboratory consumables and equipment. Forthcoming growth will greatly expand offerings. LAB GLASS 90° Bend Vacuum Hose Inlet Flow Control Adapter 19/38 Joint PTFE Plug Complete. No cracks or chips. Excellent used condition. Used glassware will show signs of wear sometimes including residue. Light scratches, stickers/tap
|
|
|
Kimax Class B 50mL Auto Zero w/ Reservoir Buret P2 3-Way PTFE Stopcock SHARP
For Sale, one(1) Kimax Model: 17051F-50. Class B, 50ml Buret, Automatic, Self Zeroing, Reservoir Fill, p2 3-Way PTFE Stopcock, Buret, in like new used condition. No chips. Scratches or cracks. Used in general purpose volumetric analysis and for repeated titrations where Class B tolerances are appropriate. Both the filling and overflow tubes accept 1/4 inch ID flexible tubing· Filled through a self-lubricating. Chemically-resistant PTFE stopcock plug· Designed from ASTM Specification E287. Class B requirements· Manufactured to the specifications found in ASTM E694· Calibrated to the accuracy requirements found in ASTM Specification E542· Manufactured from 33 expansion. Low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements PartNumber 17051F-50 Name Class B Automatic ... moreBurets Capacity(mL) 50 Graduation Range(mL) 1.5 to 50 Graduation Intervals(mL) 0.10 Tolerance(mL) ±0.10 Overall Length(mm) 735 P2 3-Way Bore Teflon Stopcock. Item(s) in photos are exact item(s) you will receive. Please review photos carefully and contact me with any questions you may have prior to bidding. Will Combine Shipping. If winner of multiple listings. Please wait for revised combined shipping invoice immediately sent upon auction(s) end. All items are shipped via Promptly& Securely with delivery tracking. All glass delivered securely and promptly as referenced below from my prior glass customers feedback's! This seller knows how to pack glass! perfect. Thanks! A+ $525 VALUE 2 LOT ACE SOLID ALL GLASS OVERHEAD MIXER STIRRER PROPELLER EXCELLENT As described. Packed very well. Thoroughly pleased. Thank you LOT OF 8. 150mL Hach Glass Bottle Reagent#19 Graduated Dropper or Stopper NICE Repete customer. On my favorite list VINTAGE ORIGINAL 2L PYREX HEAVY WALLED BOTTOM SIDE ARM FILTERING FLASK as advertised/ fast ship/ well packed/ thank you AAAAAAAAAA+++++++++ 2 LOT HAMMET SCI 250ml GRADUATED ADDITION FUNNELS PRESSURE EQUALIZING 24/40 PTFE Fast Shipping. Accurate D
|
|
|
Iwaki FW-40T1-26 Air Driven Pneumatic Bellows Pump Process Liquid PTFE/PFA 40T
Questions? Call us: 1-877-328-9236. Iwaki FW-40T1-26 Air Driven Pneumatic Bellows Pump Process Liquid PTFE/PFA 40T. Manufacturer: Iwaki Model: FW-40T1-26 Condition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Iwaki Condition: Used. Comes in non-original packaging. This pump is in Good cosmetic condition with only minor blemishes from prior use(mostly light scuffs and dusty residues) The insides of the tubes look clean. Notes: This was removed from a decommissioned system and not tested separately. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Iwaki FW-40T1-26 Bellows Pump, Specifications: Manufacturer: Iwaki, Model: FW-40T1-26, Max. flow: 40LPM, Fluid temperature: 10-100ºC, Max. speed: 80 strokes/minute, Pump connection: 1" PFA tube, Supply ... moreair connection: 3/8" PT(2) Wetted parts: PTFE. PFA, SKU: O31D007 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or
|
|
|
KimbleChase 18" Glass Column w/250 ml Reservoir, PTFE Stopcock, Chromatography
Basic glass column with 250 ml reservoir and PTFE stopcock plug. 18" overall length, stopper size: 2.
|
|
 |