In 
 
Order by: 
Available to: 
Price: 
 - 
$
46.05
Buy It Now
$20.55 Shipping
Condition: New
Location: United Kingdom
$
46.12
Buy It Now
$20.61 Shipping
Condition: New
Location: United Kingdom
$
198.99
Buy It Now
$0 Shipping
Condition: New
Location: Long Beach,CA,USA
THIS BRAND NEW ARC WELDER MACHINE 110-220 V. BRAND NEW NEVER USED COMPLETE WITH CABLE TORCH AND CABLE GROUND SPECIFICATION MODEL BX1-200 C/B RATED OUTPUT ... moreCURRENT 200 AMP RATED CURRENT VOLTAGE 110-220 VOLTS RATED FREQUENCY 50-60 HZ RATED INPUT CAPACITY 10.5 KVA NO LOAD VOLTAGE 50V RATED DUTY CYCLE 20% RATED DUTY VOLTAGE 26 V. CURRENT RANGE 65-200 AMP. COLOR MAY VARY FREE SHIPPING COST TO THE LOWER 48 STATES ONLY FREE SHIPPING COST DOES NOT APPLY TO INTERNATIONAL SHIPMENTS PAYPAL VERIFIED AS OF 2002 We only accept PayPal. If paying with PayPal please wait for your payment information to update. DO NOT CLICK'PAYMENT SENT' if you are paying with PayPal. This makes it difficult to find your payment information and will delay shipping time. Most items are eligible for a shipping combination. These items must be paid for together. And recieve a 20% discount off total shipping costs. Please wait to receive your combined invoice, do not go through checkout until your combined invoice has been sent! Shipping Policy Please note that it is the buyer's responsibility to maintain their shipping address updated. Items will be shipped to the address registered as the shipping address with Ebay/and-or/Paypal at the time of payment. Any updates to the shipping address must be made prior to payment. We do not ship to unregistered addresses. Your address must be registered with both Ebay and Paypal. We DO offer shipping to PO Boxes. However all shipments to PO Boxes must be made through USPS. If you require shipping to a PO Box you must pay using the USPS shipping option. We DO NOT allow pickups. No pickups. No exceptions. It is the buyer's responsibiity to receive the package. Or pick it up from the carrier's location. If a package is returned to us because the Buyer failed to pick it up, or receive it then they will be issued a refund for the Purchase Price of the item, not including Shipping And Handling Costs and minus both a 15% restocking fee and return shipping costs. Most of our shipments take place 1 bus
$
63
Buy It Now
Free Shipping
Condition: New – Open box
Location: Coffeyville,KS,USA
ARCOS WELDING RODS/ FILLER MATERIAL 316/316L DIAMETER: 1/8" 3.2MM LENGTH: 36" 914MM 10 POUNDS TENSILE STRENGTH FOR PIPE WELDING: 87.000 PSI ... moreTENSILE STRNEGTH FOR ALL OTHER WELDING; 88.000 PSI STAINLESS ALLOY MADE IN THE U.S.A. PLEASE READ BEFORE BIDDING. MAKING AN OFFER, OR PURCHASING Please DO NOT PAY until invoiced. WE COULD POSSIBLY SAVE YOU MONEY ON SHIPPING SHIPPING: All shipping/handling costs will be the sole responsibility of the buyer. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address so we can get the item shipped to you. Do not forget about any other charges which are charged by the carrier. This is something we have no control over and is an additional charge to shipping. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOES NOT WORK AT ALL UNLESS IT WAS LISTED AS BEING PARTS ONLY OR NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. AFTER SELLER AGREES TO SENDING THE ITEM BACK AND THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE A REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: Please note we are not experts in the parts or related fields. We may not be able to answer all of your questions but we will do our best to find all information requested. Approximate weight: 10 lbs. Please contact us for any questions or concerns. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. Thank you for your interest in our items. We always appreciate the business opportunities. Be sure to add us to your favorites list and check out our other items. VJP/596/RIGLOFT FLOOR/5)WC
$
31.5
Buy It Now
Free Shipping
Condition: New – Open box
Location: Coffeyville,KS,USA
ESAB SPOOLARC 86 WELDING RODS/ FILLER MATERIAL 138YF30 DIAMETER: 3/32" 2.4MM LENGTH: 36" 914MM CARBON STEEL WELDING ER70S-6 MADE IN THE U.S.A. ... morePLEASE READ BEFORE BIDDING. MAKING AN OFFER, OR PURCHASING Please DO NOT PAY until invoiced. WE COULD POSSIBLY SAVE YOU MONEY ON SHIPPING SHIPPING: All shipping/handling costs will be the sole responsibility of the buyer. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address so we can get the item shipped to you. Do not forget about any other charges which are charged by the carrier. This is something we have no control over and is an additional charge to shipping. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOES NOT WORK AT ALL UNLESS IT WAS LISTED AS BEING PARTS ONLY OR NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. AFTER SELLER AGREES TO SENDING THE ITEM BACK AND THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE A REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: Please note we are not experts in the parts or related fields. We may not be able to answer all of your questions but we will do our best to find all information requested. Approximate weight: 10 lbs. Please contact us for any questions or concerns. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. Thank you for your interest in our items. We always appreciate the business opportunities. Be sure to add us to your favorites list and check out our other items. VJP/577/RIGLOFT FLOOR/36)WC
$
26.99
Buy It Now
$0 Shipping
Condition: New
Location: Paramount,CA,USA
Untitled Document BEST PRICE'D TOOLS& SALES 80 watt iron plastic welding kit Features: Heats up quickly to a maximum temperature of 525 degrees ... moreF. Great for repair problems like TPO. TEO and PP materials used in car bumpers. Input power: 120V AC. 60 Hz, Plug type: two-prong polarized plug. Welding kit includes standard multipurpose welding rod w/ power cord. Repair sticks, reinforcing mesh, welder stand, and wire brush. payment Paypal is the only form of payment accepted. Payment is expected within 7 days of purchase or wining bid. shipping. Shipping is available for the following: United States. Canada, Hawaii, Puerto Rico. International shipping is available. Shipping costs may vary. All orders are usually shipped the same day after purchase and payment is received Most likely 1 business day after purchase Mon-Fri. Shipping is also available on Saturdays. Payment must be received before 1:00 p.m. PST. Tracking number will be updated to the order after item has been shipped. terms. We stand behind every product we sell. If there's anything wrong with the item you received. Please contact us. No questions asked! You may return the product within 14 days of receipt for a complete refund. Return shipping is the responsibility of the buyer. Buyer is responsible for all return shipping costs. Item must be returned in new condition. As received with all accompanied accessories and literature. Buyer assumes all risk of liability with respect to the purchase and use of the product/item. All of our pictures are photos of actual items. help For help with your order or if you have any questions regarding our products. Please contact us through eBay's internal message system. All messages are answered within 24hrs. 7 days a week. Feedback will be posted right away after product has been shipped. Positive feedback is expected after item has been received. We pride ourselves on making sure each and every customer is satisfied after the sale is complete. If there are any issues or problems please send us a mess
$
27.99
Buy It Now
$0 Shipping
Condition: New
Location: Paramount,CA,USA
$
25.99
Buy It Now
$0 Shipping
Condition: New
Location: Covina,CA,USA
$
31.99
Buy It Now
$0 Shipping
Condition: New
Location: Paramount,CA,USA
$
26.99
Buy It Now
$0 Shipping
Condition: New
Location: Santa Fe Springs,CA,USA
$
26.99
Buy It Now
$0 Shipping
Condition: New
Location: Santa Fe Springs,CA,USA
$
13.95
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
21.31
Buy It Now
$11.68 Shipping
Condition: New
Location: United Kingdom
$
29.99
Buy It Now
$0 Shipping
Condition: New
Location: Santa Fe Springs,CA,USA
$
6.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
37.98
Buy It Now
$0 Shipping
Condition: New
Location: Big Spring,TX,USA
$
37.99
Buy It Now
$0 Shipping
Condition: New
Location: Wooster,OH,USA
$
14.1
Buy It Now
$13.99 Shipping
Condition: New
Location: Middlebury,IN,USA
$
7.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
10.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
27.95
Buy It Now
$0 Shipping
Condition: New
Location: Vancouver,WA,USA
The 1/8 in. AWS Mild steel electrodes feature good penetration and fast deposition rates. Other benefits include low spatter and easy slag removal. Get ... morea nice bead at a great price with these AWS welding rods and handle a variety of welding applications. Light slag and deep penetration Amperage(amps) 75-125 Material: Mild steel Melting point(deg F) 2500- 2730 °F 1/8 in. AWS Mild steel Welding Electrode Rods come with plastic holder Tensile strength: 60.000 PSI SHIPS SAME DAY IF PAID FOR 4PM PST THANKS Payment: We prefer You may pay instantly with PayPal by clicking the pay now button at the top. Return Policy: NO QUESTIONS ASKED! You may return the product within 30 days of receipt. Item must be returned in new condition. As received with all accompanied accessories and literature, including the factory carton. Shipping, handling is not refundable unless item is returned because of defect. If item is found defective return shipping will be refunded to the buyers paypal account once the item is verified defective. Buyer is responsible for return shipping costs and logistics for all returned items that are not defective. You must contact us within 30 days of receipt, to request an RMA number. Items received without an RMA number, will be refused and returned to the sender. Terms: Buyer assumes all risk of liability with respect to the purchase and use of the product/item. All of our pictures are photos of actual items. Colors or packaging of items delivered may vary from those photographed Payment is expected within 7 days of auction close. We cannot guarantee availability of product if we do not receive payment within 7 days. Shipping: Free shipping to the all of USA unless otherwise stated. Shipping discounts for multiple items will be done on a case by case basis for international buyers. WE SHIP FASTER and SAFER THAN MOST SELLERS JUST CHECK OUT OUR FEEDBACK! We stock all available items. And we ship from our warehouse. Most orders are shipped the same or next business day after payment received. We ship
$
32.99
Buy It Now
$0 Shipping
Condition: New
Location: Santa Fe Springs,CA,USA
$
12.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
11.68
Buy It Now
$6.46 Shipping
Condition: New
Location: United Kingdom
$
58.88
Buy It Now
$0 Shipping
Condition: New
Location: Fort Lauderdale,FL,USA
$
21.98
Buy It Now
$11 Shipping
Condition: New
Location: United Kingdom
$
97.99
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
New Page 7 Our Feedback Score | Fast Shipping | Best Customer Service | Satisfaction Guaranteed 250AMP. Fan Cooled ARC Welder, Suitable For Home Or Business ... moreApplications, Portable Design With 2 Wheels Included, Rated Input Voltage: 110V/220V(Dual Mode) Rated Frequency: 50/60HZ, No-Load Voltage: 50V, Current Range: 70-250A, Rated Duty: 10% Rated Input Capacity: 14.2 KVA, Class Of Insulation: H, Stick Rod Diameter: 2mm-4mm, Convenient Top Mount Handle, Step Less Current Regulator, Completed Kit Comes With Ground Cable. Working Clamp, Face Shield, Wire Brush/Hammer& Electrodes, Free Ground Shipping To Lower 48 States In US, in titles& description We accept instant PayPal payment or credit/debit card through PayPal. Payment in full is expected within 5 days after purchase or product availability will not be guaranteed after 5 days. All orders will be processed within 1 business day. Payment received on the weekends will be process on the next business day. Please contact us if you have any questions. All e-check payments such as bank transfer or credit card will be processed once payment clears. For accurate and fast service. Please update your shipping address or choose the correct shipping address before submitting payment. Positive feedback will be left immediately after payment is received in full. We would appreciate it if you could do the same. If you have any problems or concerns. Please contact us prior to leaving feedback and we will gladly assist you. Satisfaction guaranteed. We DO NOT SHIP TO PO BOXES. And that the customer needs to provide a physical address. All orders are processed and shipped within 1-2 business days. Shipping insurance will be included at no extra charge. We will provide you with a tracking number within 2 business days after receipt of payment. Tracking information can be view in buyer's purchase history under summary tab. Please contact us at anytime if you have any further questions or concerns. Your questions will be respond within 24 hours except weekends. All package
$
70
Buy It Now
$15 Shipping
Condition: Used
Location: Waterford,WI,USA
$
89.95
Buy It Now
$0 Shipping
Condition: New
Location: Bowling Green,MO,USA
$
9.25
Buy It Now
Free Shipping
Condition: New
Location: Oscoda,MI,USA
$
13.99
Buy It Now
$0 Shipping
Condition: New
Location: Broken Arrow,OK,USA
$
4
Buy It Now
$61 Shipping
Condition: New
Location: Poland
$
13.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
12.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
31.48
Buy It Now
$0 Shipping
Condition: New
Location: Romulus,MI,USA
$
19.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
32.95
Buy It Now
$0 Shipping
Condition: New
Location: Vancouver,WA,USA
The 1/8 in. AWS Mild steel electrodes feature good penetration and fast deposition rates. Other benefits include low spatter and easy slag removal. Get ... morea nice bead at a great price with these AWS welding rods and handle a variety of welding applications. Light slag and deep penetration Amperage(amps) 75-125 Material: Mild steel Melting point(deg F) 2500- 2730 °F 1/8 in. AWS Mild steel Welding Electrode Rods come with plastic holder Tensile strength: 60.000 PSI SHIPS SAME DAY IF PAID FOR 4PM PST THANKS Payment: We prefer You may pay instantly with PayPal by clicking the pay now button at the top. Return Policy: NO QUESTIONS ASKED! You may return the product within 30 days of receipt. Item must be returned in new condition. As received with all accompanied accessories and literature, including the factory carton. Shipping, handling is not refundable unless item is returned because of defect. If item is found defective return shipping will be refunded to the buyers paypal account once the item is verified defective. Buyer is responsible for return shipping costs and logistics for all returned items that are not defective. You must contact us within 30 days of receipt, to request an RMA number. Items received without an RMA number, will be refused and returned to the sender. Terms: Buyer assumes all risk of liability with respect to the purchase and use of the product/item. All of our pictures are photos of actual items. Colors or packaging of items delivered may vary from those photographed Payment is expected within 7 days of auction close. We cannot guarantee availability of product if we do not receive payment within 7 days. Shipping: Free shipping to the all of USA unless otherwise stated. Shipping discounts for multiple items will be done on a case by case basis for international buyers. WE SHIP FASTER and SAFER THAN MOST SELLERS JUST CHECK OUT OUR FEEDBACK! We stock all available items. And we ship from our warehouse. Most orders are shipped the same or next business day after payment received. We ship
$
75
Buy It Now
$15 Shipping
Condition: Used
Location: Waterford,WI,USA
$
77.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
$
13.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
75
Buy It Now
$15 Shipping
Condition: Used
Location: Waterford,WI,USA
$
21
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
19.94
Buy It Now
$0 Shipping
Condition: New
Location: Romulus,MI,USA
$
21.93
Buy It Now
Free Shipping
Condition: New – Open box
Location: United Kingdom
$
16.14
Buy It Now
$0 Shipping
Condition: New
Location: China
$
25
Buy It Now
$15 Shipping
Condition: Used
Location: Pittsburgh,PA,USA
$
14.99
Buy It Now
$0 Shipping
Condition: New
Location: Pacific,MO,USA
$
12.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
14.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
137.7
Buy It Now
$22.96 Shipping
Condition: New
Location: Latvia
$
19.99
Buy It Now
$0 Shipping
Condition: New
Location: China
$
20.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
15.05
Buy It Now
Free Shipping
Condition: New
Location: United Kingdom
$
31.6
Buy It Now
$27.48 Shipping
Condition: New
Location: United Kingdom
$
20.37
Buy It Now
$10.98 Shipping
Condition: New
Location: United Kingdom
$
7.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
20.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
29.56
Buy It Now
Free Shipping
Condition: New
Location: United Kingdom
$
14.92
Buy It Now
$0 Shipping
Condition: New
Location: China
$
46.94
Buy It Now
$0 Shipping
Condition: New
Location: Latvia
1 2 3 4 5 6 7 8 9 10
 In 

Past Items  
 
For sale is a used PHOENIX Dry Rod II Type 2 Welding Electrode Oven Drier 20 lb Capacity 100-300deg. 115/230VAC. The cord connection is busted on the back of the machine. But as long as you leave the cord on it you don't have to worry about it. Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items.
This item is: 4 lb 10oz: Unibraze NI 99 1/8" Welding Rod Stick Electrode Nickel Warehouse Location: welding rod#403_ By bidding and or purchasing this at this auction you(the buyer) agree to the following terms and conditions: 1. All items are sold“AS IS” No warranty or liability is expressed or implied. 2. The buyer agrees that: All items are shipped without insurance. It is the buyers responsibility to let us know if they want insurance on the item. Insurance cost is $2.00 for every $50 insured. In $50 increments. The buyer agrees that if no insurance is purchased and the item is not received or received damaged that no claim shall be brought against the seller. 3. We only ship to PayPal confirmed street addresses. No exceptions. No PO Boxes, APO, FPO or similar addresses. 4. The buyer agrees that the item fits the buyers purpose prior ... moreto bidding. 5. The buyer agrees that once we have delivered and shipped the item at USPS. UPS or FEDEX the item(s) delivery, handling, product damage, and non-delivery is the responsibility of the buyer. The buyer agrees to indemnify and hold harmless the seller from any claims arising out of any conditions after the item has been delivered to the place of shipment. 6. We only ship to the continental United States. The shipping price quoted is for the continental United States Only. All other locations will be charged extra. Out of county buyers agree to pay any additional charges that we ask them to pay including but not limited to import duties. Shipping costs, packaging costs, time costs, and other costs. 7. All our items are wholesale. Overstock, unclaimed, foreclosure purchase or salvage goods. Most boxes have been opened for inspection and photos. If items are listed as new they may not come with original packaging. 8. The buyer agrees there will be no refunds for
As with most items I sell. This is part of a liquidation from an local estate. Please help me out by closely reviewing the pics to best judge what you are bidding on. Description: Welco 14 FC Nickel Silver Alloy Torch Welding Rod. I do not know what type of alloys it is made of. A magnet will not stick to the rod. Approximately 3.75 pounds total. Picked from an dirty environment. Dusty/dirty to the touch. Rods may not usable, or at least not as intended. The Flux Coating is loose and falling off( please see attached photos) Some rods/areas have heavy loss of Flux Coating. I am not familiar with this type of thing. It is possible that I may be missing something regarding wear. Please see the provided photos to best judge for yourself. Yes we will combine shipping. email us for a quote) Shipping cost is actual based on size and weight of package. ... moreBoxed with bubble wrap and packing peanuts. No envelopes. We do not profit from shipping charges. We do not charge for packing supplies. No additional fees. Items paid for on Friday will be shipped the following Monday. Otherwise we usually ship within 24 hours of payment. Domestic Shipping: Will be USPS Mail. Shipping will be actual cost based on package weight and size. You can use the Ebay provided Postal Calculator to determine your shipping cost via USPS Parcel Post or Priority Mail. International Shipping: Will be shipped USPS Priority Mail International only. No other method may be used. To determine this amount. You may scroll down below to the Ebay provided Postal Calculator, or you can email me for a quote. International Buyers: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not m
2.5' BY 5' SECTIONS OF CAST IRON T SLOT TABLES CAN BE BOLTED TOGETHER IN DIFFERNT CONFIGURATIONS. OUR SHOP USE THESE DAILY, WE MEDIA BLASTED THEM HAD THEM SURFACED AND PUT 1/2-13 TAPPED HOLES EVERY 6 INCHS FOR FIXTURING AND WILL LAST MANY LIFE TIMES FOUR SECTIONS AVAILABLE THIS AUCTION IS FOR ONE SECTION AND THEN ITS YOUR OPTION TO TAKE ANY NUMBER OF SECTIONS YOU WANT, I WILL BAND THESE TO A PALLET AND LOAD ONTO YOUR PREARRANGED CARRIER AT NO CHARGE,NO RESERVE ONE SECTION WEIGHS 730 LBS(ONE SECTION HAS A MINOR CRACK ON BOTTOM OF CASTING BUT WILL NOT EFFECT ITS USABILITY,LAST PICTURE IS OUR TABLE AFTER MUCH HARD USE AND IS FOR REFERENCE ONLY)
PHOENIX DRY ROD II TYPE 2 120/230/240 AC 150 WATT ADJUSTABLE TEMPERATURE FROM 100-300 F 38-149 C SERIAL# 00207220061050. In good working condition Has marking from felt marker. Has minor scrapes and scratches. THE TEMPERATURE THAT YOU SEE IN THE PICTURE IS AFTER THE OVEN WAS POWERED UP FOR 30 MINUTES 20 lb(10 kg) storage capacity for 14 in or 18 in electrodes. Rod elevator for quick removal of electrodes, Adjustable thermostat provides temperature control in the field, Body and lid insulation minimizes heat loss and energy usage, Safety Yellow color increases field visibility, Spring latch tightly secures insulated lid for transport 120/240V dual volt heating elements, IF THE BUYER IS NOT 100% SATISFIED WITH PURCHASE. WE WILL GIVE FULL REFUND AS SOON AS ITEM IS RETURNED. BUYER PAYS RETURN SHIPPING UNLESS ITEM IS DEFECTIVE. BUYER MUST HAVE ... moreITEM PAID IN FULL 7 DAYS AFTER AUCTIONS END. ALL SALES CONSIDERED FINAL 5 DAYS AFTER DELIVERY DATE. If you feel the need to leave negative feedback. Please contact us first to allow us to resolve your issue before doing so.
2) PHOENIX 10 LB. WELDING ROD OVENS USED WORKING CONDITION SINGLE PHASE 120 VOLT 100 WATTS 2 OVENS
JACKSON WELDING ROD HOLDER CLAMP. AND SMALL AMATI HAMMER MADE IN ITALY. CLAMP MADE IN U.S.A. USED. PRETTY GOOD SHAPE CLAMP DOES HAVE A LITTLE BURN MARKS. SEEE PICS.
Phoenix Dry Rod II Electrode Welding Rod Stabilizing Oven Type 5 Prev Stop Play Next NO RESERVE! This auction is for a used Phoenix Dry Rod II Electrode Welding Rod Stabilizing Oven Type 5 Portable Auction For U.S. Only! FedEx Shipping Only! Auction: Includes/ Features: Phoenix Dry Rod II Electrode Welding Rod Stabilizing Oven Type 5 Portable 50 lb(25 kg) storage capacity for 14 in or 18 in electrodes Adjustable thermostat provides temperature control in the field Body and lid insulation minimizes heat loss and energy usage Spring latch tightly secures insulated lid for transport Temperature: 100°F- 300°F Adjustable Voltage: 120/240 Volts- Single phase Power cord Condition: 90% overall Cosmetic Condition Has some dings& a puncture on the inside lining of the oven lid(purely cosmetic) This item is sold with a fourteen day return ... morepolicy if it is returned in the same condition. Sorry. We cannot refund shipping charges. Items paid for by Paypal will only be shipped to your Paypal Confirmed address. There are no EXCEPTIONS! FedEx Shipping Only! Standard flat rate shipping fees apply to the lower 48 States only. If you do not live in the lower 48 states please e-mail me before you bid. And I will quote you on shipping. Please Do Not Request for a“Buy it Now” on this Item. WSS Items within the United States will be shipped either by FedEx or USPS. All items will be shipped with a Delivery Confirmation or tracking number for proof of delivery. Delivery Confirmation is not a tracking number. The Delivery Confirmation can only tell us when a package has been delivered. All items shipped internationally will be shipped by USPS Priority Mail insured. All items shipped internationally will not be declared a lower value. The item will be declared for what it sold for. I appreciate all bids and will do everything to ensure your satisfaction. Payments must be received within 7 days from close of the auction. If payment is not received within the allotted time. I will file you as a Non-Paying Bidder! You will have s
Keen KT-15 Electrode Stabilizing Oven In Good Used Working Condition Take A Good Look At The Pictures. Some signs of Scratches THE TEMPERATURE THAT YOU SEE IN THE PICTURE IS AFTER THE OVEN WAS POWERED UP FOR 30 MINUTES serial# 410549. These lightweight portable ovens are designed to protect electrodes during transfer from the holding oven to the job. They are light and easy to carry. The square shape gives these ovens greater stability vertically or horizontally. The KT-15 portable models are equipped with an"on" indicating light. The oven will operate on 120V or 240V with no modification other than cord cap. When attaching the plug to the power cord. Be sure the plug is an approved component and is rated for the proper voltage and amperage. All units meet electrical code requirements when used with a grounding plug and a grounded ... morereceptacle. Electrode Capacity: 15 lbs. 6.8 kg) 18" 45.7 cm) rods. Volts: Dual voltage 120V/240V. Watts: 70W. Temperature: Constant Input- Max 300°F Insulation: 1" 2.54 cm) Thermal Insulating Wool. IF THE BUYER IS NOT 100% SATISFIED WITH PURCHASE. WE WILL GIVE FULL REFUND AS SOON AS ITEM IS RETURNED. BUYER PAYS RETURN SHIPPING UNLESS ITEM IS DEFECTIVE. BUYER MUST HAVE ITEM PAID IN FULL 7 DAYS AFTER AUCTIONS END. ALL SALES CONSIDERED FINAL 5 DAYS AFTER DELIVERY DATE. If you feel the need to leave negative feedback. Please contact us first to allow us to resolve your issue before doing so. Interior Dimensions: 3.3D" 8.38 cm) x 19" 48.26 cm) Net Weight: 13 lbs. 5.9 kg) Shipping Weight: 16 lbs. 7.3 kg) Shipping Dimensions: 10.5" 26.67 cm) x 9" 22.86 cm) x 22.75" 57.78 cm) Receptacle Load: 120V- 12 Amp.
Phoenix/ Dry Rod brand welding rod dryer in near new condition. I would list it as new but it has been sitting around on a shelf and has developed some mild blemishes in the cadmium coating around the top as can be seen in the photo with the lid open. But as you can see from the photos. It has never been used and comes with all the original papers including the instruction manual. This dryer holds 50 lbs. of rod. The dimensions are 21" high x 9" x 9"
selling 25lbs of welding rod. They are in good shape 1/4 x 18"Long. See picture's.
This is a used Gullco 120 volt welding rod stabalizing oven. It is a model 10A-20J. It is 100 watt single phase and has a temperature of 135c. It is in good working condition. It is unfortunately missing the carrying handle. But I bet a welder could put one on! Manufactured on 10-20-10. It has scratches from being used and some white and blue paint on it apparently for identification. Being sold as is. Payment due within 7 days of auction end. Shipping via UPS ground. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13e806ada34-0xff-
This is a very used 120 volt 100 watt welding rod stabalizing oven. This is a Phoenix oven but I have no idea the model. Very banged up and was painted red at some point. Paint is chipped and scuffed but the rod dryer works just fine. Being sold as is. Payment due within 7 days of auction end. Shipping via UPS ground.
about 22 piece lot of used welding lead connectors and rod holders. there are about 12 piece of connectors.8 welding rod holders and 2 ground clamps. the pictue is a new ground clamp i found,it is not in the group picture, still has tag. some of the pieces say tweeco and lenco. these are used but are still good and can be used for parts package is about 20 pounds, will ship usa for 14.99Check out my! Be sure to add me to your!
Up for bid is a vintage welding rod container/holder. Not sure of metal type but think it is pewter. Container measures approximately 2 1/2" round and 16" long. Top seals tightly. Well made construction. No mfg marked on it. Maybe homemade from a skilled craftsman. Nice collectible item. Please ask questions before bidding. PAYPAL only. Prompt shipping in USA and payment is due within 3 days of close of auction. Thanks for looking.
DME AABACO WELDING ROD 1/8" SS 11S17 QTY(16) NEW APPROX 14" LONG FROM ONE END TO OTHER RODS ARE NEW/UNUSED AND COME WITH A DOA WARRANTY! CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Insurance is optional. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual domestic shipping please E-mail in advance for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American ... moreExpress Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# Systech Inc. will wait 10 days for all checks to clear before shipping. Please send payments to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items
These rods are size 1/4" x 18" Murex E7018 H4R Sold As Is. Please e-mail any questions you might have before bidding. Shipping may vary due to location. Quoted highest shipping but location may determine lower cost. Please check before bidding for exact quote on shipping.
Hi. Clearing out some of my extra oxy-acetylene parts. Up for consideration is a Victor J27 torch body. This is probably an old wartime aircraft torch, And this was rebuilt by the local welding supply store. I'm not sure if they send it out or do it in house. The body was beadblasted and everything is very clean. The valves/knobs turn very smoothly as they should, And they hold the pressure when off. The threads are basically perfect. The only bummer is someone used some type of pliers to remove the center, And there are a couple chew mark right below the valve body. Not too bad though. This is a really nice piece to add to your set. I really should keep this but I have a great J28 setup that works great although it is heavier and longer. That is why I'm keeping the tips and cutting attachment! Great for light duty sheetmetal welding ... moreand brazing for long periods of time-super light! Perfect for road bike frames and chopping up hot rods. Shipping $9. Thanks! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13ebc05ec21-0x104-
Hi Clearing out some of my extra oxy-acetylene torch pieces. Up for consideration is a war-time AIRCO 9100 torch with 2 STYLE 919 tips no 2& 3. This hasn't been used for a while now but should be in working condition. The knobs or valves turn freely with good resistance and hold pressure off. The tips are not plugged up and all the threads are in good shape. I added the cut hose nuts to keep the threads from getting banged up. This has some wear to the plating. This is perfect start to a great aircraft torch setup! Super light and great for brazing or sheetmetal welding for hours. Perfect for bicycle frames or chopping hot rods! Shipping $9 USPS priority. Thanks! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13ebc05ec46-0x106-
This is a rod shear/cutter made by Armstrong- Blum- Marvel. It is in excellent working condtion. I have listed it as used but it does not look like it has been used. All of the cutting edges are sharp. It has openings for 1/8" 3/16" 1/4" 5/16" 3/8" dia, rods. Thanks for looking. No shipping outside of the USA
LINCOLN ELECTRIC WELDING ROD NEW IN CONTAINER THIS SALE IS FOR ONE 5 POUND CONTAINER 6013-3/32. 5 POUND CONTAINER WE HAVE 4 OF THIS ITEM AVAILABLE IF MORE WANTED TO SAVE ON SHIPPING
Electrode Quiver EQ-50si welding rod oven. In nearly new condition. I plugged it in and warmed up a container of 7018 once to be sure it worked and the rods were dry for a job. Runs off of 120v and includes the four part divider. When empty the unit is relatively light-about 25 lbs. Thermostat operates from 50-300 degrees. I am not sure of the manufacturer thought the unit was purchased by the government and disposed of as surplus.
Rotunda Rod Hopper including welding rods.
These items up for auction are 3 Electrode Quiver welding rod stabalizing ovens model EQ-97SI. I won these items as part of a lot from an auction of a closed down shop. These items were working when removed from service. I tested these items by plugging them in. Turning them on and letting them heat up. They all heated up perfectly. These items have normal wear and tear like dings and scratches and dirt. One of them is missing the plastic know on the top and 2 of the units are missing 2 of the rubber feet. None of these defect affect the operation of the units. The pics above are pics of all 3 units you will be receiving. Specs are as follows: Manufacturer- Electrode Quiver CE Model EQ-97SI Input 110- 120 V 250 watt Capacity 20 lbs up to 18" rods Temp range 80 degrees C- 150 degrees C Normal 0 My Prices are not set in stone. If you do ... morenot like my price just make me an offer. You never know I might just accept it. Ships to US. Canada and Mexico via UPS. This can also be picked up locally. I will allow a 14 day return policy with a full refund for the item. Shipping cost will not be refunded and return costs are the buyers responsibility. As you can see from my feedback I go out of my way to make my customers happy and pride myself on that. If you have any questions at all please don't hesitate to ask. You might find them lower priced than mine but they are not going to give you the customer service that i do. I care that my customers are happy. I will make your transaction as easy as it can get from the time you buy it until the time you get it and decide you are happy with it. Just check my feedback you will not be sorry.
Selling Rod Gaurds welding stick holders. 4) in total,keeps all of them safe and dry. and mine come with an addition of Welding rods inside each one.this one is-stainless steel. So the shipping weight will obviously be increased due to some being over half full and some a little less. Look for my other welding equipment for sale at the same time to get a multi-purchase discount on shipping!
Vintage torches& a cutting head. Probably need rebuilt but I don't know for sure.
CLICK ON THE LINK ABOVE TO CHECK OUT MORE ITEMS AT OUR STORE! NEW! BLUE DEMON WELDING PRODUCTS 1/8" x 36" ER316L Welding Rod- 1 lb Tube Catalog Number: ER316L-125-01T Specifications: Model Number: ER316L-125-01T Alloy: ER316L Diameter: 1/8" 3.2 mm) Length: 36" Weight: 1 lbs(0.45 kg) Heat: E72540 Lot: 3396 AWS: A5.9 NOTES: Dual Imprint- CSSC ONLY STOCKS THE BEST AND MOST TRUSTED NAMES IN THE INDUSTRY Swagelok. Kunkle, Fisher, Badger, Magnetrol, United Electric, Krom-Schroder, Wiedmuller, Omega, Omegalux, Bi-Torq, SMC, Turck, Ferraz Shawmut, Rittal, Panduit, Marathon, MTE, Littelfuse, Bussmann, Lapp Group, Hoffman, Harting, Fluke, Dongan, Cutler-Hammer, Eaton, Crouse Hinds, CMP, Brook Crompton, ABB, Apollo, Conbraco, Circle Valve, Sud-Chemie, Square-D, King Instruments, CEMP, Dayton, and many more! WE GUARANTEE OUR PRODUCTS- ... moreIF YOU AREN'T SATISFIED WITH YOUR PRODUCT SEND IT BACK WITHIN 7 DAYS AND WE WILL FULLY REFUND YOUR MONEY! WE SHIP ALL ITEMS VIA FED-EX 2-DAY AIR UNLESS NOTED OTHERWISE SHIPPING IS FREE UNLESS NOTED CLEARLY ALL PURCHASES RECEIVED BEFORE 6:00 PM EST WILL BE SHIPPED THAT DAY IF YOU HAVE ANY QUESTIONS PLEASE SHOOT US A MESSAGE AND WE WILL BE HAPPY TO ANSWER THEM! Powered by
Old welding rods electrodes in old condition but apear to be unused. since im not a welder im not sure
Rod Guard® Cannisters& Accessories provide great storage and inventory control for all your welding electrodes. Rods and filler metals. And every one of them is made in America- and built to last. Holds up to 10 lbs. of 12" or 14" electrodes.
J. Little Mercer Co. Inc. SELLING the whole lot. Will not break down HUGE welding rod mig and tig wire lot aluminum stainless steel unused sealed about 1200 lbs MIG wire: Inweld 309L Stainless.045" dia(9) 25# rolls. 309 molt-1.045" 11) 25# rolls. Steel.045' dia(2) rolls. TIG: 3/32 x 36" alum(4) boxes 5# each. Stick rod: Caultec SMA 1/8" rod 5.5" 11) boxes. Caultec SMA 5/32" 33# 3) boxes. Lincoln 308 5/32" 50# 4) boxes. Lincoln 308L 5/32" 5# 7)boxes. Lincoln 309L 3/32 8# 5) cans Inweld 309 3/32 10# 12 boxes. 309 mo 3.2mm 5 kg(4) boxes. 309L 1/8" 10# 2) boxes Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. ... moreJust e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping. Sorry No PayPal
This auction is for the following items: PHOENIX DRYROD Electrode Welding Dry Rod Stabilizing Oven THERE IS A HOLE ON THE SIDE OF THE BOX Shows signs of normal usage. Item shows normal wear with scuffs and scratches. Unit is in working condition. This auction includes everything pictured! WE ARE NOT RESPONSIBLE FOR TYPO’S PLEASE LOOK AT ALL PICTURES CAREFULLY AND ASK QUESTIONS B4 BIDDING* We do not have a history of the products we sell. We make purchases from different sources for resale purposes. Happy bidding J! PLEASE READ the following Terms for COMPUTERS. NETBOOKS, LAPTOPS, IPAD or the likes there of: NORMAL WEAR: Normal wear on a used laptop can be considered minor cover scratches. Minor wear to the keyboard; minor screen scratches/rub marks that have no impact on the picture, etc. We are not responsible for software contents that ... moreare left on such devices and this includes the operating system. We recommend for you to contact the manufacturer or download a copy of the OEM restore software. BATTERY POLICY for all electronics and power tools. Basically anything that takes a battery. Used batteries are variable. Some last a few minutes. Some last a few hours. It is impossible to test and guarantee each and every battery's length of charge. We test that all batteries hold a charge(in other words are not DOA) Our standard policy is to guarantee that your battery will hold a charge but not the length of that charge. Terms& Conditions: Payment: Payment must be made within 3 days. After which appropriate action will be taken. Payment MUST BE MADE via confirmed US Registered PAYPAL ONLY! WE WILL NOT END AN ACTIVE AUCTION EARLY. HIGHEST BIDDER WINS THE AUCTION! Shipping: We offer free shipping on all of our products unless duely noted. We ship on the following days:Tuesday.Thursday, Friday· We will ship only to a confirmed PayPal address and only in Contiguous U.S. Lower 48 States) Products will be shipped within 3 business days of cleared payment. Items will be carefully and professi
Here is a very nice working Pheonix Dry Rod 2. This is in perfect working condition. It was tested. It is extremely clean.
you are bidding on a used early 1950's roadmaster.Cleveland welding co. bike. it has some rust in places.tires have dry rot but hold air.new departure hubs.skip tooth drive train.bike rides like a tank.being sold without the pedals.being sold as is as seen condition.serial number E38274 ACw.wheels are straight considering their age.i have the tank listed separate.TANK NOT INCLUDED.could easily combine shipping charges if interested if you purchase the horn tank on my separate listing.seat has tear.any questions please ask.please don't wait till 3 minutes before auction end to ask a question.i took a pic of the tire to show that the center bead(strip)isn't even worn off.you are bidding on this bike in as is as seen condition.hopefully there are more bids that watchers.the quicker the payment the quicker the shipping.sure would ... morehate to strip it and sell it for parts next week.united states shipping only.no Hawaii or Alaska.just lower 48 states thanks.happy bidding
Welding Rod Consumables Electrodes Low-Hydrogen Hardfacing Electrode.Patricio
Great Price! This has several small scratches. But that does not impact the functionality of the great helmet. No major scratches and works great! The Metal Man“BAD ROD” Large Window 9-13 Variable Shade/Grind Mode Auto-Darkening welding helmet features an Industrial Grade German made lens for excellent clarity. Comfortable design with the Hot Rod graphics to show your style. 3.82” X 2.44” Large viewing are allows the operator to see more of the work area. Features include auto on/off. Internal controls including 9-13 shade control. Grind Mode, Dial Sensitivity and Delay adjustments Grind Mode feature allows the user to wear the helmet while grinding. This helmet features a ratchet style head gear with 5 point adjustment and large(2/3 rds the head band) washable/replaceable sweat band Safety standard approvals include ANSI Z87.1-2003. CSA ... moreZ94.3. And CE for safe, reliable operation you can count on. Specifics: Viewing Area 3.82 in. x 2.44 in. Variable Shade Control 9 to 13• Grind Mode• Auto On/Off• Adjustable Sensitivity• Adjustable Delay• Switching Time 1/25.000 second• Solar Power Supply plus replaceable battery• Low Amp to 2 Amp• UV/IR Protection to Shade 16• ANSI and CSA Approval• 5 Point Adjustment Head Gear• Magnifier(Cheater) lens compatible Like our product? Return the favorand"Like" us on Facebook to hear about our eBay Deal of the Week! https:www.facebook.com/MetalManWorkGear
HENKAL KEEN DRY OVEN FACTORY SET@ 275 DEGREE.PERFECTLY FITS 50LB CAN OF RODS. FREE INSIDE DIMENSIONS: 10 1/2" X 9" X 22 3/4" EXCELLENT WORKING CONDITION, VERY GOOD APPEARANCE, PROFESSIONALLY USED AND MAINTAINED. AND PROBABLY BEST OF ALL IS PRICED WAY BELOW NEW. WILL FAST SHIP TO THE LOWER 48 UNITED STATES, AFTER PAYPAL PAYMENT IS RECEIVED. QUESTIONS, COMMENTS, CONCERNS CONTACT ME I'LL ANSWER. THANKS FOR LOOKING
CLICK ON THE THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a BARNES BOWMAWELD 25180 128.000 PSI HIGH STRENGTH WELDING ROD. 6 ticks. Priced to sell. No foreign bidders. No exceptions. NO CANADIANS. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Ever. This listing was posted using command line interface provided by. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I do collect sales tax on in-state purchases.
PHOENIX 1205500 10# DRY ROD OVEN FOR WELDING 14" OR 18" ELECTRODES RODS Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description: PHOENIX 10# ROD OVENS Model# 1205500 10 lb(5 kg) storage capacity for 14 in or 18 in electrodes Rod elevator for quick removal of electrodes 10 ft cord locks into the oven base to create a fixed connection Body and lid insulation minimizes heat loss and energy usage Indicator light. Voltage: 100-240 Volts- Single phase Temperature: 300°F Preset Heating element: 60 watts Thermostat: Preset Insulation: Fiberglass batt(1.50 inches) Chamber depth: 19.75 inches Chamber diameter: 2.88 inches Each unit appears to be in GREAT used condition- like new. Refer to pictures for details. Retail, this item would cost over $270.00 each! You are purchasing ... moreone per order, however, more are available for immediate purchase! For other great deals on Construction Surplus items, Please check out our store! We are surplus equipment dealers with a wide range of products for sale. We are not experts in any particular item or category we advertise. We do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best as we can. All statements and configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or
This auction is for a mixture of 11.33 pounds of welding rod and 3 pounds of lead as follows with letter referenced to the picture: A = 2 pounds of Uni-3000 Uniweld part#L17F1 3/32- Dense deposits on dirty oil soaked cast; iron; controlled penetration; Oxide desolving Arc B = 2 pounds of Uni-1800 FC Uniweld part#CS2DX 1/16 High tensile strength Brazing alloys; Excellent subtitute for silver brazing on steel; Thin flowing for close fitting joints C = 4 pounds of Uni-4000 Uniweld part#P17H1 1/8- Superior Versatility; Dense porosity free deposits; rapid deposition; Excelent arc stability D = 4 pounds of Uni-4100 Uniweld part#P21F2 3/32- Forms a smooth filet; Requires little or no finishing; Can be used on all know weldable and brazable aluminum; Deposits have good color match E = 1 pound of#6011 F = 3 pounds lead G = 1/3 pound of Sears Arc welding ... morerods; mild steel AC/DC; 1/16 X 9 inches. Please ask all questions before bidding.
120 Lincoln Welding rods(7024-1) 3/16 Found Rods in a shop we were cleaning up. I am not a welder do not know to much about rods. Please ask any question relating to item.
This item is: 7lbs 8 oz: Dytron 508 5/32" 80.000 PSI Welding Rod Stick Electrode Rod may not be shipped in orginal packaging so that it can fit in a Flat rate box for shipping Rod is unused. Partial opened container, may have minor blemishes that do not affect the functionality from handling. Warehouse Location: welding rod#200_ By bidding and or purchasing this at this auction you(the buyer) agree to the following terms and conditions: 1. All items are sold“AS IS” No warranty or liability is expressed or implied. 2. The buyer agrees that: All items are shipped without insurance. It is the buyers responsibility to let us know if they want insurance on the item. Insurance cost is $2.00 for every $50 insured. In $50 increments. The buyer agrees that if no insurance is purchased and the item is not received or received damaged that no claim ... moreshall be brought against the seller. 3. We only ship to PayPal confirmed street addresses. No exceptions. No PO Boxes, APO, FPO or similar addresses. 4. The buyer agrees that the item fits the buyers purpose prior to bidding. 5. The buyer agrees that once we have delivered and shipped the item at USPS. UPS or FEDEX the item(s) delivery, handling, product damage, and non-delivery is the responsibility of the buyer. The buyer agrees to indemnify and hold harmless the seller from any claims arising out of any conditions after the item has been delivered to the place of shipment. 6. We only ship to the continental United States. The shipping price quoted is for the continental United States Only. All other locations will be charged extra. Out of county buyers agree to pay any additional charges that we ask them to pay including but not limited to import duties. Shipping costs, packaging costs, time costs, and other costs. 7. All our items are wholesale. Overstock, unclaimed
This item is: 6 lb of 6010 Welding Rod Stick Electrode 5/32" Lincoln Electric Fleetweld 5P Welding Rod will be removed from metal tin and shipped in a flat rate box. Warehouse Location: welding rod#402_ By bidding and or purchasing this at this auction you(the buyer) agree to the following terms and conditions: 1. All items are sold“AS IS” No warranty or liability is expressed or implied. 2. The buyer agrees that: All items are shipped without insurance. It is the buyers responsibility to let us know if they want insurance on the item. Insurance cost is $2.00 for every $50 insured. In $50 increments. The buyer agrees that if no insurance is purchased and the item is not received or received damaged that no claim shall be brought against the seller. 3. We only ship to PayPal confirmed street addresses. No exceptions. No PO Boxes, APO, ... moreFPO or similar addresses. 4. The buyer agrees that the item fits the buyers purpose prior to bidding. 5. The buyer agrees that once we have delivered and shipped the item at USPS. UPS or FEDEX the item(s) delivery, handling, product damage, and non-delivery is the responsibility of the buyer. The buyer agrees to indemnify and hold harmless the seller from any claims arising out of any conditions after the item has been delivered to the place of shipment. 6. We only ship to the continental United States. The shipping price quoted is for the continental United States Only. All other locations will be charged extra. Out of county buyers agree to pay any additional charges that we ask them to pay including but not limited to import duties. Shipping costs, packaging costs, time costs, and other costs. 7. All our items are wholesale. Overstock, unclaimed, foreclosure purchase or salvage goods. Most boxes have been opened for inspection and photos. If items are listed as new they m
This item is: 50 lb: 3/32" 7018 Welding Rod Stick electrode Opened. Some flux missing Rods may be removed from orginal package for shipping in order to fit in shipping packaging. By bidding and or purchasing this at this auction you(the buyer) agree to the following terms and conditions: 1. All items are sold“AS IS” No warranty or liability is expressed or implied. 2. The buyer agrees that: All items are shipped without insurance. It is the buyers responsibility to let us know if they want insurance on the item. Insurance cost is $2.00 for every $50 insured. In $50 increments. The buyer agrees that if no insurance is purchased and the item is not received or received damaged that no claim shall be brought against the seller. 3. We only ship to PayPal confirmed street addresses. No exceptions. No PO Boxes, APO, FPO or similar addresses. ... more4. The buyer agrees that the item fits the buyers purpose prior to bidding. 5. The buyer agrees that once we have delivered and shipped the item at USPS. UPS or FEDEX the item(s) delivery, handling, product damage, and non-delivery is the responsibility of the buyer. The buyer agrees to indemnify and hold harmless the seller from any claims arising out of any conditions after the item has been delivered to the place of shipment. 6. We only ship to the continental United States. The shipping price quoted is for the continental United States Only. All other locations will be charged extra. Out of county buyers agree to pay any additional charges that we ask them to pay including but not limited to import duties. Shipping costs, packaging costs, time costs, and other costs. 7. All our items are wholesale. Overstock, unclaimed, foreclosure purchase or salvage goods. Most boxes have been opened for inspection and photos. If items are listed as new they may not come with origina
This item is: 4 lbs 8 oz: 5/32" x 14" Prostar 6013 ED031161 welding rod stick electrode Rod may not be shipped in orginal packaging so that it can fit in a Flat rate box for shipping Rod is unused. Partial opened container, may have minor blemishes that do not affect the functionality from handling. Warehouse Location: welding rod#206_ By bidding and or purchasing this at this auction you(the buyer) agree to the following terms and conditions: 1. All items are sold“AS IS” No warranty or liability is expressed or implied. 2. The buyer agrees that: All items are shipped without insurance. It is the buyers responsibility to let us know if they want insurance on the item. Insurance cost is $2.00 for every $50 insured. In $50 increments. The buyer agrees that if no insurance is purchased and the item is not received or received damaged ... morethat no claim shall be brought against the seller. 3. We only ship to PayPal confirmed street addresses. No exceptions. No PO Boxes, APO, FPO or similar addresses. 4. The buyer agrees that the item fits the buyers purpose prior to bidding. 5. The buyer agrees that once we have delivered and shipped the item at USPS. UPS or FEDEX the item(s) delivery, handling, product damage, and non-delivery is the responsibility of the buyer. The buyer agrees to indemnify and hold harmless the seller from any claims arising out of any conditions after the item has been delivered to the place of shipment. 6. We only ship to the continental United States. The shipping price quoted is for the continental United States Only. All other locations will be charged extra. Out of county buyers agree to pay any additional charges that we ask them to pay including but not limited to import duties. Shipping costs, packaging costs, time costs, and other costs. 7. All our items are wholesale. Overstock, un
This item is: 4 lbs 14 oz: Stoody Thermadyne Rod#21 welding rod stick electrode Rod may not be shipped in orginal packaging so that it can fit in a Flat rate box for shipping Rod is unused. Partial opened container, may have minor blemishes that do not affect the functionality from handling. Warehouse Location: welding rod#209_ By bidding and or purchasing this at this auction you(the buyer) agree to the following terms and conditions: 1. All items are sold“AS IS” No warranty or liability is expressed or implied. 2. The buyer agrees that: All items are shipped without insurance. It is the buyers responsibility to let us know if they want insurance on the item. Insurance cost is $2.00 for every $50 insured. In $50 increments. The buyer agrees that if no insurance is purchased and the item is not received or received damaged that no claim shall ... morebe brought against the seller. 3. We only ship to PayPal confirmed street addresses. No exceptions. No PO Boxes, APO, FPO or similar addresses. 4. The buyer agrees that the item fits the buyers purpose prior to bidding. 5. The buyer agrees that once we have delivered and shipped the item at USPS. UPS or FEDEX the item(s) delivery, handling, product damage, and non-delivery is the responsibility of the buyer. The buyer agrees to indemnify and hold harmless the seller from any claims arising out of any conditions after the item has been delivered to the place of shipment. 6. We only ship to the continental United States. The shipping price quoted is for the continental United States Only. All other locations will be charged extra. Out of county buyers agree to pay any additional charges that we ask them to pay including but not limited to import duties. Shipping costs, packaging costs, time costs, and other costs. 7. All our items are wholesale. Overstock, unclaimed
This item is: 39 lbs: 1/4"x 18" Murex 7018 MR H4R welding rod stick electrode Rod may not be shipped in orginal packaging so that it can fit in a Flat rate box for shipping Rod is unused. Partial opened container, may have minor blemishes that do not affect the functionality from handling. Warehouse Location: welding rod#203_ By bidding and or purchasing this at this auction you(the buyer) agree to the following terms and conditions: 1. All items are sold“AS IS” No warranty or liability is expressed or implied. 2. The buyer agrees that: All items are shipped without insurance. It is the buyers responsibility to let us know if they want insurance on the item. Insurance cost is $2.00 for every $50 insured. In $50 increments. The buyer agrees that if no insurance is purchased and the item is not received or received damaged that no ... moreclaim shall be brought against the seller. 3. We only ship to PayPal confirmed street addresses. No exceptions. No PO Boxes, APO, FPO or similar addresses. 4. The buyer agrees that the item fits the buyers purpose prior to bidding. 5. The buyer agrees that once we have delivered and shipped the item at USPS. UPS or FEDEX the item(s) delivery, handling, product damage, and non-delivery is the responsibility of the buyer. The buyer agrees to indemnify and hold harmless the seller from any claims arising out of any conditions after the item has been delivered to the place of shipment. 6. We only ship to the continental United States. The shipping price quoted is for the continental United States Only. All other locations will be charged extra. Out of county buyers agree to pay any additional charges that we ask them to pay including but not limited to import duties. Shipping costs, packaging costs, time costs, and other costs. 7. All our items are wholesale. Overstock, unclaimed, f
This item is: 30 lb: In Bad Condition: 1-a2a Welding Rod Stick electrode. I do not know the mfg. I do not know the rod size. The rods have rust. Some corrosion, and some flux problems. Rods are opened. By bidding and or purchasing this at this auction you(the buyer) agree to the following terms and conditions: 1. All items are sold“AS IS” No warranty or liability is expressed or implied. 2. The buyer agrees that: All items are shipped without insurance. It is the buyers responsibility to let us know if they want insurance on the item. Insurance cost is $2.00 for every $50 insured. In $50 increments. The buyer agrees that if no insurance is purchased and the item is not received or received damaged that no claim shall be brought against the seller. 3. We only ship to PayPal confirmed street addresses. No exceptions. No PO Boxes, APO, FPO or ... moresimilar addresses. 4. The buyer agrees that the item fits the buyers purpose prior to bidding. 5. The buyer agrees that once we have delivered and shipped the item at USPS. UPS or FEDEX the item(s) delivery, handling, product damage, and non-delivery is the responsibility of the buyer. The buyer agrees to indemnify and hold harmless the seller from any claims arising out of any conditions after the item has been delivered to the place of shipment. 6. We only ship to the continental United States. The shipping price quoted is for the continental United States Only. All other locations will be charged extra. Out of county buyers agree to pay any additional charges that we ask them to pay including but not limited to import duties. Shipping costs, packaging costs, time costs, and other costs. 7. All our items are wholesale. Overstock, unclaimed, foreclosure purchase or salvage goods. Most boxes have been opened for inspection and photos. If items are listed as new they ma
This item is: 20 lb of 6011 Welding Rod Stick Electrode 3/32" Welding Rod will be removed from metal tin and shipped in a flat rate box. Warehouse Location: welding rod#400_ By bidding and or purchasing this at this auction you(the buyer) agree to the following terms and conditions: 1. All items are sold“AS IS” No warranty or liability is expressed or implied. 2. The buyer agrees that: All items are shipped without insurance. It is the buyers responsibility to let us know if they want insurance on the item. Insurance cost is $2.00 for every $50 insured. In $50 increments. The buyer agrees that if no insurance is purchased and the item is not received or received damaged that no claim shall be brought against the seller. 3. We only ship to PayPal confirmed street addresses. No exceptions. No PO Boxes, APO, FPO or similar addresses. 4. ... moreThe buyer agrees that the item fits the buyers purpose prior to bidding. 5. The buyer agrees that once we have delivered and shipped the item at USPS. UPS or FEDEX the item(s) delivery, handling, product damage, and non-delivery is the responsibility of the buyer. The buyer agrees to indemnify and hold harmless the seller from any claims arising out of any conditions after the item has been delivered to the place of shipment. 6. We only ship to the continental United States. The shipping price quoted is for the continental United States Only. All other locations will be charged extra. Out of county buyers agree to pay any additional charges that we ask them to pay including but not limited to import duties. Shipping costs, packaging costs, time costs, and other costs. 7. All our items are wholesale. Overstock, unclaimed, foreclosure purchase or salvage goods. Most boxes have been opened for inspection and photos. If items are listed as new they may not come with original pac
This item is: 2 lbs 8 oz: 1/8" 1717 FC Harris Welco welding rod stick electrode 18" Rod may not be shipped in orginal packaging so that it can fit in a Flat rate box for shipping Rod is unused. Partial opened container, some flux problems Warehouse Location: welding rod# 208_ By bidding and or purchasing this at this auction you(the buyer) agree to the following terms and conditions: 1. All items are sold“AS IS” No warranty or liability is expressed or implied. 2. The buyer agrees that: All items are shipped without insurance. It is the buyers responsibility to let us know if they want insurance on the item. Insurance cost is $2.00 for every $50 insured. In $50 increments. The buyer agrees that if no insurance is purchased and the item is not received or received damaged that no claim shall be brought against the seller. 3. We only ... moreship to PayPal confirmed street addresses. No exceptions. No PO Boxes, APO, FPO or similar addresses. 4. The buyer agrees that the item fits the buyers purpose prior to bidding. 5. The buyer agrees that once we have delivered and shipped the item at USPS. UPS or FEDEX the item(s) delivery, handling, product damage, and non-delivery is the responsibility of the buyer. The buyer agrees to indemnify and hold harmless the seller from any claims arising out of any conditions after the item has been delivered to the place of shipment. 6. We only ship to the continental United States. The shipping price quoted is for the continental United States Only. All other locations will be charged extra. Out of county buyers agree to pay any additional charges that we ask them to pay including but not limited to import duties. Shipping costs, packaging costs, time costs, and other costs. 7. All our items are wholesale. Overstock, unclaimed, foreclosure purchase or salvage goods. Most boxes ha
This item is: 10 lbs: 1/4" x18" 7018 welding rod stick electrode Some flux missing.Most intact Rod may not be shipped in orginal packaging so that it can fit in a Flat rate box for shipping Rod is unused. Partial opened container, may have minor blemishes that do not affect the functionality from handling. Warehouse Location: welding rod#202_ By bidding and or purchasing this at this auction you(the buyer) agree to the following terms and conditions: 1. All items are sold“AS IS” No warranty or liability is expressed or implied. 2. The buyer agrees that: All items are shipped without insurance. It is the buyers responsibility to let us know if they want insurance on the item. Insurance cost is $2.00 for every $50 insured. In $50 increments. The buyer agrees that if no insurance is purchased and the item is not received or received ... moredamaged that no claim shall be brought against the seller. 3. We only ship to PayPal confirmed street addresses. No exceptions. No PO Boxes, APO, FPO or similar addresses. 4. The buyer agrees that the item fits the buyers purpose prior to bidding. 5. The buyer agrees that once we have delivered and shipped the item at USPS. UPS or FEDEX the item(s) delivery, handling, product damage, and non-delivery is the responsibility of the buyer. The buyer agrees to indemnify and hold harmless the seller from any claims arising out of any conditions after the item has been delivered to the place of shipment. 6. We only ship to the continental United States. The shipping price quoted is for the continental United States Only. All other locations will be charged extra. Out of county buyers agree to pay any additional charges that we ask them to pay including but not limited to import duties. Shipping costs, packaging costs, time costs, and other costs. 7. All our items are wholesale. Overst
HARRIS Stay-Silv® 15 Silver Brazing Alloy- ROUND ROD Style- 1 Tube: 20 FULL FLAT STICKS AT 20 INCH LONG 5 FLAT STICKS AT 18 INCH LONG
HOBART Model T-300 This machine is like brand new. It was never used. There is no dust inside. It is super clean. Before putting this up for auction we tested it in all the ranges. It includes the original owners manual It has 30' of copper lead with a rod holder. It also has a copper ground cable with a ground clamp. All you need is a welding hood and some welding rod. INPUT(POWER SOURCE) SINGLE PHASE 230/460/575- VOLTAGES. 110/55/44- AMPS. 60 HZ. RATED OUTPUT 300 AMPS AC@ 440 VOLTS 300 AMPS DC@ 60% DUTY CYCLE WEIGHT 407 LBS. I will skid and load it. Get your own shipper or I can get a shipping quote for you. Just send your address and dock access or forklift capabilities. Please with any questions Winner must make contact including payment arrangements within 3 days of auction end. Payment must be received within 10 days of auction ... moreend. I reserve the right to resell any item if I have not received contact from the winner within 3 days, and or received payment for any item within 10 days of the auction end. I accept PayPal. I try to descibe exactly what the item is. Please email any questions. All sales final. I do participate in leaving feedback on Ebay. Thanks for looking and good luck! Powered by The free listing tool. List your items fast and easy and manage your active items.
You are bidding on a Certanium 702 1/8" Diameter Welding Rods(15 lbs. with Rod Hard Case The rods are brand new in the package. However the case is used. Case says Certanium 707. But the rods are Certanium 702 rods. Auction only includes item(s) pictured unless otherwise specified. Please read our terms& conditions. And feel free to contact us with any questions or concerns you may have. Terms and Conditions: Please keep in mind that we are not the original owners of the items that we sell. We describe the items to the best of our ability to give our customers the best possible service. All items have been inspected to ensure customer satisfaction. Please ask questions and be specific! The more questions you ask. The better we can serve you. Standard order processing is 5 business days. Shipping Policies: Quoted Flat Rate US Domestic ... moreShipping applies to items that can be shipped US Priority Mail. USPS, UPS Ground Shipping, and FedEx Ground Shipping. Expedited shipping can be accommodated for an additional fee. Combined Shipping. Insurance, and Signature Confirmation are available per request. All items are securely packaged to ensure a safe delivery. Return Policy: If you are dissatisfied with a product do not hesitate to contact us! You may return an item within 30 calendar days of the invoice date. All returns must be returned in the condition they arrived in(i.e. new items must be returned in new condition. Etc. If there are any problems with anything you have received. Please contact us before escalating any issues. We will be happy to accommodate. Disclaimer: We take immense pride in our listings and we strive to make customer satisfaction our number one priority. Our goal as a seller is to become a top seller partner within the eBay community. Again. If you are unhappy with an item please do not hesitate to contact us! We are always willing to make this the best experience for both buyer and seller. Thank you! Good Luck and Happy Bidding!
This auction is for a used tig welding rod holder. It is home made out of aluminum It measures 16 x 8 It has four tubes. They are 1 3/4. 1 1/2, 1 1/2 and 1 inch It has holes through the support for mounting. Thanks for looking and happy bidding!
50 feet of ark welding.Rod,stick wire leads for welding,in good shape.No cracks or cuts,dont know what brand tho
PHOENIX DRY ROD 50A Welding Rod Electrode Stabelizing Oven 50# box AT THE END. This auction is for a Phoenix Dry Rod 50A electrod stabilizing oven. This oven holds 50 pounds of rod.Works on 120 volt AC and heats up great. Email with any questions.Sold with no reserve. Please check my other auctions for more great items. Enjoy! Paypal is accepted and preferred. Payment is expected within 48 hours of purchase. Items are shipped USPS. Unless weight or size exceed shipping requirements. Fed Ex is used for larger items. Delivery confirmation is required. Add To Favorites My Auctions Feedback Template and Photo By Olde*Blue*Barn*Primitives Copyright © 2008. 2009 e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13fff559ce6-0xf2-
I am a wannabe welder. I bought all the things I was told I needed. I have 2 hoods. Gloves, 2 welders, this oven, a rolling table for the welders to move around, a welding shirt, metal to practice on, and all the"jobs" awaiting me to weld. One thing I do not have. Is the"ability" to weld, well. to weld nice straight clean welds. My welds are ugly. I do not want to weld anymore. I am done with my ugly welding. So. Here is my oven, you can have it at a steal. My inabilities is your gain. It is what the title said. A Henkel Kleen 20 pound welding rod oven. Model K-15- 120 volts, 1 phase, 100 watts of pure energy. It is blue, and square. tall, with a bit of an attitude. Sometime in a previous life, someone etched a number on it, why, I do not know. Also, I do not think the handle is original, I do not why that is there either. ... moreShipping is for USA lower 48. All other addresses will be calculated. Because I am a returning seller to Ebay. Your feedback is important to establish trust with future buyers. I would very much appreciate pos. feedback once you receive the item and are satisfied with your purchase. I will reciprocate in kind. Thanks. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1400ec852df-0xf2-
81mm Cartridge This listing is for the plastic cartridge only.no contents. Many people use these as canisters for their welding rods. It has a lid that screws on. 23" long. Please see the detailed photos and email me with any questions. Pictures are provided to best represent the item and act as the majority of the description. If you have any questions. Please click the"Ask Question" link at the bottom of the page to contact us. to view our other items. to add us to your favorite sellers list. Items valued above $50 USD are not available for international shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1400f462ecd-0xf8-
Confirmed Paypal Address only please. As pictured 3.5 lbs ER308 2.0& Other Welding Rod s. My Motto: Most items will ship within one business day I always aim to have the lowest price. If you find a lower price item of the same type and quality, please let me know and I will work with you on price Please ask any questions Guaranteed to work as stated. Or your money back I do my best to listing items as accurately as I can. If you have any problem with the item you purchased please contact me and I will resolve the issues Returned items will have a 20% restocking fee(IT COVERS OUR SHIPPING AND HANDING COST TO LIST AND RELIST THE ITEMS) No returns on open software or laptops Please Examine Photographs Closely As They Are An Important Part Of The Listing And Are A Part Of The Description Of The Listed Item Please do not assume that anything ... moreelse comes besides what is pictured. Thank you· NEW: Never used. Comes with everything new, Package might be open just to check content· New other: new. Never used, but might be missing box, or have some marks on it Normal 0 false false false EN-US X-NONE X-NONE
Neoweld welding rod oven works fine
Used F& M Mafco Electrode Holder. It is used and it looks used. It works good. Just like it should, the jaw spring is tight and it is comfortable in your hand. Please read ALL important information below. So there will NOT be any confusion when your item arrives. Such as Item Description. Payment, Terms, Shipping, and Services. If you bid on our items, I am assuming you Read and Agreed to all the Terms listed below. If you have any questions, Please feel free to contact us at anytime. Thanks so much! Happy Ebaying! Payment Methods: We accept PAYPAL ONLY! The winner of our item(s) should send your payment within 5 days of auction ending. If you are winning more than one item. You can wait until all items have ended to pay all together. If you are unable to pay within the 5 days please contact us and we will work something out. Shipping& ... moreHandling: We will ship out your item(s) USUALLY within 2-3 business days when payment arrives. Items will not ship out on Weekends. This information is provided by the carrier and excludes weekends and all Major Holidays. Note: Delivery times may vary. Particularly during peak periods. We will ship worldwide. however shipping time takes longer. and cost more. If your okay with that then yes we will ship worldwide. All our items will be shipped to buyers paypal address. Please make sure your address is correct with paypal before you bid. Every package will have a Tracking Number provided. Which you can go to and track your item at anytime after shipping. We do Combine shipping. However if you want combine shipping contact us first to let us know what it is you want to be combined. as some items can Not be combined in shipping. But with most cases we do combine shipping on orders to save you money. However if your items are being combined with shipping. wait for us to send you an invoice with the total amount before paying. so there will not be any confusion. Please do not wait until the auction has ended to ask me for combined shipping as like i said above.
THIS IS A STORAGE LOCKER FIND. THEY ARE LINCOLN ELECTRIC OPIPELINER WELDING RODS. THERE ARE 2 TUBES 1 IS 5/32" X 14" 4.0mm X 350mm.THAT LOOKS FULL AND THE OTHER IS 5.0mm X 350mm 13/16" X 14" THIS 1 HAS ABOUT 13 RODS. THE RODS HAVE 8010-P1 PIPLINER 8P+ THE CONTANERS ARE ROUGH. PLEASE LOOK AT ALL PHOTOS CAREFULLY. Q'S ARE WELCOME.
STEINAL HG 2000 E ELECTRONIC CONTROL VINYL FLOOR WELDER 240VOLTS ADJUSTABLE HEAT SETTING IN GOOD WORKING ORDER COMES WITH 12 COILS OF WELDING ROD VARIOUS COULORS AND LENGTHS COILS 100 METRE WHEN FULL MOST COILS NEARLY FULL. SEE PHOTOS) ANY QUESTIONS PLEASE ASK
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE ITEM DESCRIPTION: Th is auction is for a Military Surplus Ammo Tube. These Make a Great Welding Rod Holder. They have a screw-on top with o-ring seal. And a convenient carry handle. It will hold any rod or similar item up to about 20" long. It is in good pre-owned condition. Please see photos for the actual condi tion of this item. See our other auctions for many other great items! We do try to combine like items that close within a three day period and that are paid for together in one payment to save you on shipping costs. So please email us for a combined total due if you win more than one like item! PP429 Normal 0 false false false EN-US X-NONE X-NONE HELLO! EVERY EBAY SELLER HAS THEIR OWN UNIQUE TERMS OF SALE. SO PLEASE TAKE JUST A MOMENT ... moreTO READ THE ENTIRE AUCTION PAGE TEXT AND TO ACCEPT ALL OF OUR AUCTION TERMS BEFORE PLACING A BID TO HELP AVOID ANY MISUNDERSTANDINGS. REMEMBER, YOU ARE AGREEING TO THESE TERMS IN ADVANCE BY PLACING A BID. THANK YOU! SHIPPING CHARGES& SCHEDULE: Sellers are ONLY allowed to ship items to your registered address as provided to us by PayPal. Please do NOT ask us to ship to a different address. The auction winner will pay shipping charges as shown in the eBay shipping calculator below. All items shipped through the USPS include Delivery confirmation for your protection. We do allow free local pick-up by appointment only. Subject to my availability, in Escondido, CA 92029. Items will be shipped on the next Friday weekly shipping day following receipt of your cleared payment. Note that PayPal e-checks can take over a week to clear. We ship through both the USPS and Fed-Ex(we do not use UPS) once each week, normally on Friday afternoon. Your cleared payment must be received before 5PM Pacific Time on Thursday for your item to ship on Friday. That means that your item will ship between one to five business-days after receipt of your cleared payment, depending upon the day of the wee
Lot of welding and torching equipment with 3 nozzle cleaning files. 2 torch nozzles, 2 strikers, 1 metal marker, 1 honing stone, three lots of 7018 welding rod 9/32-1/8-3/32 diameters, one lot of 6011 welding rod 3/32 diameter Posted with{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-1405e1648c3-0xff-
Greetings to all my customers. Please keep in mind that everything I sell we have a limited supply of or we MAY HAVE ONLY 1. This means if you see something that is a really good deal and you can stock up you should. Because once it is gone then it is gone. Also. Please keep in mind that if there is a problem with an item contact me. I will resolve it to your liking. I have a 100% Satisfaction policy I intend on keeping strong:
i000000. Click to Enlarge Click to Enlarge Click to Enlarge Just one of inkFrog's Creations: Description Phoenix Dry Rod Type 1 Electrode Stabilizing Rod Oven Used but in good working condition As the smallest portable rod oven available from Phoenix. The DryRod®II Type 1 oven is ideal for the individual welder. Type 1 ovens have a capacity of 10 lb and can be filled from a large capacity storage oven to keep electrodes moisture-free until use. The oven chamber temperature remains fixed at a consistent 300°F(150°C) ensuring electrodes remain moisture-free in the field and pass inspection. Type 1 ovens provide unmatched durability and are designed to be repaired rather than replaced. Built with heavy gauge steel and powder coated to withstand challenging conditions. The Type 1 will remain in use for multiple projects. Specs: ... moreVoltage: 100-240 Volts- Single phase Temperature: 300°F Preset Heating element: 60 watts Thermostat: Preset Thermometer: No thermometer option Insulation: Fiberglass batt(1.50 inches) Chamber depth: 19.75 inches Chamber diameter: 2.88 inches Location: APG05-2 AU00016 Line#19: Payment and Shipping Payment is expected with in 5 days of Auction end. We accept PayPal as well as more conventional options. We ship the next business day after payment is received. All our books are carefully packaged to avoid damage in transit and are shipped with delivery confirmation. Most items are shipped via USPS Media Mail but we also offer Priority Mail service. We will combine shipping when possible. inkfrog terapeak.
ESAB TIGROD ER80S-B2 CHROME NOLY TIG ROD GTAW MILE STEEL WELDING ROD LOT OF 3 Click Photos to Enlarge Click to Enlarge Click to Enlarge Description Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 ESAB TIGROD WELDING ROD M odel: TIGROD ER80S-B2 QTY: 3 chrome-moly TIG rod Stress Relieved 1 hr@ 11500 F(6200 C) Yield Stress 81 ksi. 559 MPa Tensile Strength 95 ksi. 655 MPa Elongation in 2” 29% This item appears to be in good used condition. Refer to pictures for details. Retail, this item would cost over $375.00 each! Bid now& $ave! For other great deals on Construction Surplus items, Please check out our store! Our customers are our top priority; If you are not completely satisfied with your purchase or you feel like we deserve less than a 5 star rating. Please call us before leaving feedback. We are surplus equipment ... moredealers with a wide range of products for sale. We are not experts in any particular item or category we advertise. We do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best as we can. All statements and configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. We offer a 14 day money back or exchange– buyer pays return freight* Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engravin
5 CASES OF LINCOLN WELDING ELECTRODE RODS! NEW CONDITION! MODELS 8P+ 5.0 MM 3/16" 7018 3/32 2.4MM COMES AS SHOWN IN THE PICTURES! WE HAVE MORE WELDING RODS IN STOCK! EMAIL US WITH YOUR QUESTIONS! WE APPRECIATE YOUR BUSINESS! CHECK OUR STORE FOR MORE WELDING EQUIPMENT!
3 SEALED BOXES OF OERLIKON WELDING ELECTRODE RODS! NEW CONDITION! MODELS 308L-16. 1/16 COMES AS SHOWN IN THE PICTURES! WE HAVE MORE WELDING RODS IN STOCK! EMAIL US WITH YOUR QUESTIONS! WE APPRECIATE YOUR BUSINESS! CHECK OUR STORE FOR MORE WELDING EQUIPMENT!
3 SEALED BOXES OF HOBART WELDING ELECTRODE RODS! NEW CONDITION! MODELS 308L-17. 16 3/32 1/8 COMES AS SHOWN IN THE PICTURES! WE HAVE MORE WELDING RODS IN STOCK! EMAIL US WITH YOUR QUESTIONS! WE APPRECIATE YOUR BUSINESS! CHECK OUR STORE FOR MORE WELDING EQUIPMENT!
Only used it a few times. And worked great. Good quality, made in Italy. Works on 220 volts. Comes with case, cables, manual, and a free welding mask.
Description You are bidding on one(1) used Phoenix Bench DryRod Electrode Stabilizing Oven. Type: 300. Model: 16C. Temperature Range: 100- 550 Deg. F. 1000 Watts. 120 Volts AC. Condition Item is used; works fine. Small dent on top of the oven. Shipping& Handling I can ship USPS or FedEx Ground. Buyer pays $105.56 shipping and handling(shipped in 48 States) We will combine shipping and reduce S&H charges in most cases. I accept PayPal. Tax Louisiana residents will be charged a 4% sales tax.
Welding Stinger Lead 11' in length with Tweco Rod Holder# A-732 300 AMPS Tweco Twist Connector This a used stinger lead with signs of some wear. Has been in storage and still works fine. The cable is in good condition with no breaks in the cable cover showing the copper wire. SHIPPING within the USA only PAYMENT via PayPal within 3 Days please Please contact me if you have any questions Thanks
This auction is for a Lincoln Electric Viking Street Rod 2450 Series Welding Helmet. This item features auto darkening welding hood with 4x5 in. cartridge and 3.82x2.44 in viewing area. Infinite control of shade sensitivity and delay. 4 arc sensors, magnifying cheater lens capable and hard hat adapter capable. This item is used and does have some surface scratches as well as some scratches on the lens(nothing too major) This item is used and is being sold AS IS and there will be no refunds provided. If you have any questions or would like additional pictures please feel free to email me and I will be glad to get back to you. Allow 24 hours for replies and if you would like more pictures please enclose your email address. This is an AS IS sale. Item Condition: Most of our items are used unless otherwise stated. Condition is our opinion only; ... moreall pertinent questions should be asked prior to bidding. Normal wear and tear is to be expected. We are more than glad to send more pictures of the items you are interested in; so please ask for additional photos. Bidding: Please ask questions before bidding. Please do not bid unless you intend to purchase the item. Serious bidders only! Payment: Payment is due within 5 days of the auction’s end. If you cannot pay by the end of those 5 days. Please contact us so that we will not file you as a non pay bidder. Feedback: If there are any issues or concerns please contact us prior to leaving feedback. Feedback is now permanent and once it is left we cannot do anything to resolve the issue. Once we receive positive feedback. We will be glad to do the same for you. Shipping: We ship within 3 days of receiving clear payment. Confirmation/tracking numbers will be provided when the item has been shipped. Local pickup is available upon request. Also we are more than glad to combine shipping upon emailed request. Contact us before payment on combined shipping.
one opened can of 308-16 3/32x9 steel welding rod. thee are 123 sticks left in the can. all are in good shape. spec is aws a5.4 and new was a six pound can. lot# 955550. I have two listings for welding rod and will combine shipping. thanks for looking.
MUREX WELDING RODQUIVER 18” Rods Box: 457mmL x 110mm T x 120mm W P/n: 1380485 Power: 110Volts. Watts: 150, Hz: 50 S/n: 089 Full working order Been in our stores for years not plugged inor used. Had rods stored in it Cost new £51.00 inc VAT No VAT. Sell worldwide, please ask for an accurate quote Goods will only be released/dispatched uponreceipt/ banks confirmation of cleared funds All Shipping& Packing costs to thepurchaser 01384 636683
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Phoenix"DryRod" Type 300 Electrode Stabilizing Oven Phoenix Type 300. Model 16. Interior dimensions: 17-3/4" diameter X 19-1/2" long. Temperature range: 100 to 550 degrees Fahrenheit. Input power: 1/60/120V AC at 1,000 Watts. NOTE: The welding rod that you see in the interior photograph is NOT included with this item. The interior shelves are in good condition. No foreign bidders. No exceptions. NO CANADIANS. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup ... moreis always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Buyer agrees to pick-up items paid for. Within 45 days of payment, and further understands that storage beyond reasonable time damages the seller. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, whichever comes first, are forfeited as abandoned and as payment for storage costs and liquidated damages, with no refund given. Buyer assumes responsibility to ensure safety of this item. The seller is unable to make any guarantees regarding safety of this item.
Drader Welding Rod and Welding tips As some of you who see this will know I just sold my last Drader Injectiweld welder. I am selling what I have left for welding rods and welding tips. I have about 6 lbs or so of White HDPE welding rod. I also have the following Drader Intectiweld- Welding tips. All of these fit a Drader Injectiweld W30000. 1) Prototype tip. 2) Bull nose tip. 3) conical tip. 4) 1/4" Filet tip. 5) Butt weld tip. All of these put together will cost you about $600.00 new. A few of the tips are slightly used and for that- I'll sell them all for $300.00.
Excel Excelene Welding Cable 2.Standard Ends Jackson Ground Clamps and Rod Clamps on the Ends great condition that's Over 50 feet Each Cable