In 
 
Order by: 
Available to: 
Price: 
 - 
$
57.99
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
78
Buy It Now
$0 Shipping
Condition: New
Location: Suwanee,GA,USA
BIG WILTON SWIVEL BENCH VISE 5" JAW WIDTH JAW OPENING 6 1/2" MODEL#110850. MODEL 845. MADE IN U.S.A. NICE USED CONDITION SHOWING USE WITH SOME ... moreGLUE RESIDUE SPOTS ON THE METAL. VISE IS HEAVY AT OVER 30 POUNDS OF STEEL IF THE SHIPPING COSTS LESS THAN CHARGED FOR FIXED PRICE SHIPPING. I WILL REFUND THE DIFFERENCE BY PAYPAL MINUS THE EBAY FINAL VALUE SHIPPING FEE. SEE MY OTHER ITEMS* WE COMBINE SHIPPING* SHIPPING THESE DAYS IS NOT CHEAP. WE COMBINE SHIPPING AT NO EXTRA COST FOR*SMALL ITEMS* AND* BY WEIGHT* FOR LARGE/ LONG ITEMS THAT WILL NOT FIT IN A FLAT RATE ENVELOPE OR FLAT RATE BOX( UP TO 70 POUNDS IF IT FITS) USPS FLAT RATE PRIORITY SHIPPING IS THE BEST DEAL BY WEIGHT. FOR USPS SHIPPING, PLEASE REMEMBER THAT THE TIME IN TRANSIT CALCULATOR IS A BEST CASE SCENARIO AND THAT THE USPS ESTIMATE IS RARELY CORRECT* MOST ITEMS HAVE A LOW START PRICE AND NO RESERVE. HERE IS YOUR CHANCE TO BID ON A REASONABLE PRICED ITEM INSTEAD OF THOSE INTERNET RETAIL STORE PRICES THAT EBAY IS FULL OF. GOOD LUCK. EBAY IS STILL AN AUCTION SITE! MANY FOLKS FORGET THAT EBAY WAS DESIGNED TO BE AN AUCTION SITE AND THESE MEMBERS HAVE PAGES AND PAGES OF ITEMS LISTED AT RETAIL OR ANTIQUE STORE PRICES. THIS IS NOT TRUE FOR ACMEGUIDE WHERE WE LIST MOST ITEMS AT A LOW START PRICE AND NO RESERVE. PLEASE HAVE FUN AND BID. $$ I ACCEPT OTHER FORMS OF PAYMENT $$ AUCTION PHOTOGRAPHS: WE USE ACTUAL PHOTOS OF THE ITEMS FOR SALE. IF WE USE THE EBAY SYSTEM, THERE WILL BE ONE STOCK PHOTO FROM EBAY AND THE OTHER PHOTOS WILL BE OF THE ITEM THAT IS LISTED FOR SALE. IMPORTANT* WE DO NOT MAKE MONEY ON SHIPPING. WE CHARGE WHAT IT COSTS AND TRY TO USE USPS PRIORITY SHIPPING BECAUSE IT HAS DELIVERY CONFIRMATION AND IS RELIABLE. IT COSTS A LITTLE MORE, BUT LIKE I SAID IT IS RELIABLE. IF YOU WANT TO SAVE A BUCK AND GO FOR USPS PARCEL SELECT JUST SAY SO AND WE WILL SEND YOU A NEW INVOICE. MORE IMPORTANT SHIPPING INFORMATION* THE SHIPPING TIME OF DELIVERY ESTIMATE QUOTED BY EBAY NEXT TO THE SHIPPING SERVICE IS A BEST CASE SCENARIO. LAR
$
39.99
Buy It Now
$0 Shipping
Condition: New
Location: Long Beach,CA,USA
$
74.99
Buy It Now
$0 Shipping
Condition: New
Location: Suwanee,GA,USA
$
69.99
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
130
Buy It Now
$0 Shipping
Condition: New
Location: Perth Amboy,NJ,USA
$
177.5
6d 7h 51m 39s
4 bids
$18 Shipping
Condition: Used
Location: Elgin,IL,USA
$
585
Buy It Now
$0 Shipping
Condition: New
Location: Auburn,WA,USA
$
109
Buy It Now
$6 Shipping
Condition: New
Location: Howell,MI,USA
$
84.99
Buy It Now
$0 Shipping
Condition: New
Location: Suwanee,GA,USA
$
93.03
Buy It Now
$0 Shipping
Condition: New
Location: Suwanee,GA,USA
$
179.99
Buy It Now
$41.99 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
76.59
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
Better Values Friendly Service Fast Shipping BRAND NEW 6" ACCU Lock Vise Unit overall dimension: 18/14" x 9" x 10" Jaw Width: 6" ... moreJaw Opening: 5.9" Jaw Height: 1-3/4" Accurate to.002" on parallelism and Squareness Each pound of force in horizontal induces 1/2 lb of downward force. Eliminating jaw tilt Sliding surface of the vise bed is flame hardened and ground Unit approx. weight: 53 lbs Quantity: 1 Shipping FREE SHIPPING in lower 48 States. Additional charge applies to APO. AK, HI, GU, PR, and VI addresses. Please contact seller for additional information. All items will be shipped Ground Service. Payments Paypal payment only please. Buyer can use MasterCard. Visa, Discover and American Express through Paypal. It is Safe, Fast& Reliable. In all cases payment is expected within 7 days of sale date. Contact Info We are here to help. If you have any questions or concerns regarding your purchase, please feel free to contact us at any time using the eBay messaging system. Please allow 24 to 48 hours to receive a response. We will do our best to answer all your questions as soon as we can. Policy All purchases come with a 14-days money back guaranteed. SHIPPING IS NON REFUNDABLE. NO EXCEPTIONS. Buyers are responsible for all postage fees on return. All Returns must have RMA(Return Authorization Number) issued from Seller or package will be refused.
$
135.95
Buy It Now
$0 Shipping
Condition: New
Location: Houston,TX,USA
$
229.95
Buy It Now
$0 Shipping
Condition: New
Location: Prospect,CT,USA
$
50.41
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
199.99
Buy It Now
$19.95 Shipping
Condition: Used
Location: Mansfield,OH,USA
$
126.92
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
93.93
Buy It Now
$10 Shipping
Condition: New
Location: Houston,TX,USA
$
68.29
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
38.85
Buy It Now
$0 Shipping
Condition: New
Location: Bridgeville,PA,USA
HD- Cross Slide Vise 4" For exact centering and accurate drilling, Cross- slide design provides two-axis precision adjustment for perfect bits placement, ... moreEasy sure attachments to any drill press table with multiple mounting lugs, Heavy duty cast iron(HT200) Cast aluminum handle, Outside surface: Polishing. Baking varnish processing, Lead screw: chrome plating(above one) Black coating(following two) Vise and cross slide have adjustable shims for fine adjustment, Precision thread clamping and cross slide screws, Cross travel: 3-1/2" Longitudinal travel: 5-1/2" Jaw depth: 1-1/4" Maximum jaw opening: 4" Overall height: 4-3/8" 100% Satisfaction Guarantee We offer a standard 30-days return policy on our eBay orders and some items are covered by a one-year manufacturer’s warranty. If you need to return your product for any reason. You can return your item for a complete refund of the original payment or a replacement will be processed. All freight on returned items is the responsibility of the buyer. To set up a return please contact us first. If the item is damaged, we may request photos of the damage to expedite the process. Upon receipt of the item, a refund or replacement will be processed. All items are inspected after receipt. Returned products must be in their original package and must be still in new and re-saleable condition. About Us Thank you for taking the time to learn about us. We are Committed to bring you the best products at the most affordable pricing. We are a company specialize in tools located in California. Shipping We ship within 1 business day after receiving payment and a tracking number is uploaded to your order when it is processed. We use USPS and FedEx for most orders. We are unable to guarantee a specific carrier. Payment We accept credit cards and debit cards through PayPal. California residents will be charged applicable tax during checkout. Contact Us The best way to receive a quick response is by using eBay"Ask a question" link. We work hard to of
$
74.95
Buy It Now
$0 Shipping
Condition: New
Location: Saint Charles,IL,USA
$
845
Buy It Now
$0 Shipping
Condition: New
Location: Auburn,WA,USA
$
54.99
Buy It Now
$23.49 Shipping
Condition: New
Location: Fort Mill,SC,USA
$
69.99
Buy It Now
$0 Shipping
Condition: New
Location: Covina,CA,USA
$
18.99
Buy It Now
$0 Shipping
Condition: New
Location: Long Beach,CA,USA
$
59.99
Buy It Now
$12.95 Shipping
Condition: New
Location: Battle Ground,WA,USA
$
179.99
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
227.14
Buy It Now
$0 Shipping
Condition: New
Location: Suwanee,GA,USA
$
99.95
Buy It Now
$13.95 Shipping
Condition: New
Location: Arlington Heights,IL,USA
$
97.12
Buy It Now
$0 Shipping
Condition: New
Location: Houston,TX,USA
$
99.99
Buy It Now
$0 Shipping
Condition: New
Location: Suwanee,GA,USA
CPO Model 11693. List Price: $99.99, CPO Price: $96.97, You save: $3.02(3% Availability: In Stock, Shipping: FREE Shipping Accurately moves your work ... morepiece in horizontal and longitudinal for precise positioning, Cast side knobs accurately dial in 0.1mm increments, Hardened V-grooved jaws hold round shaped objects both vertically and horizontally, Durable construction with fine grain cast iron castings, Black oxide coated screw provides consistent clamping pressure, Durable base has 5 bolt lugs for easy mounting on a machine table, Y-Travel, 4 9/10 in. Jaw Width, 3 in. Smooth Jaw Inserts# 11963-01, Max. Opening Capacity, 3 in. X-Travel, 4 9/10 in. Jaw Depth, 1 1/8 in. Cross Slide Drill Press Vise- 3 in. Jaw Width. 3 in. Jaw Opening, 1-1/8 in. Jaw Depth- 11693, Lifetime Limited, For full warranty information. Please contact us at 800-714-0969* Warranty valid for US customers only, Orders outside the US are not protected by manufacturer warranty. All orders are still covered by CPO's 30-day Money Back Guarantee) Shipping and customs charges for non-US orders will be calculated when the item is added to cart, All corded products are designed to work with North American 110/120V outlets only. Products used in foreign outlets without proper use of a voltage adapter/converter will not be covered by CPO's return policy or 30-Day Money Back Guarantee, CPO's commitment to 100% customer satisfaction is backed by a 30-Day Money Back Guarantee! If you are unhappy with the condition of your product. Send it back unused and we will replace it with a different one. If you changed your mind or are unhappy with your purchase. Simply return it unused for a refund* CPO's 30-Day Money Back Guarantee is for the amount of the merchandise ordered and does not cover any additional expenses related to installation. Materials, etc. CPO will cover the cost of return shipping in the event that an incorrect or defective item was sent. FAST SHIPPING! Most orders ship within 1 business day via UPS Ground shipping! Some
$
109.95
Buy It Now
$7 Shipping
Condition: New
Location: Narberth,PA,USA
$
15.99
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
467
Buy It Now
$0 Shipping
Condition: New
Location: Eastlake,OH,USA
$
131.04
Buy It Now
$0 Shipping
Condition: New
Location: Houston,TX,USA
$
137.96
Buy It Now
$0 Shipping
Condition: New
Location: Houston,TX,USA
PULL-TYPE DESIGN FOR UP TO 80% LESS DEFLECTION. ALL SIDES FLATNESS TO 0.0001" ACCURACY BOTH SIDES. SQUARE TO BOTTOM 0.0004" PARALLEL TO EACH ... moreOTHER TO 0.0008" CAN BE MOUNTED ON SIDE OR BASE BOTTOM KEYWAY ATTACHMENT TO LOCK ANDPOSITION THE VISE ON YOUR TABLE SLOT ACCURATELY. MAX. JAW OPENING: 6" JAW WIDTH: 6" JAW HEIGHT: 1-3/4" O.A.L: 15" CLAMPING FORCE: 10.000LBS W.T: 70 LBS Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
$
82
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
40.92
Buy It Now
$0 Shipping
Condition: New
Location: Long Beach,CA,USA
$
78.32
Buy It Now
$0 Shipping
Condition: New
Location: Mesa,AZ,USA
$
59.95
Buy It Now
Free Shipping
Condition: New
Location: Madison Heights,MI,USA
$
46.99
6d 7h 11m 44s
0 bids
Free Shipping
Condition: Used
Location: Elgin,IL,USA
$
29.99
Buy It Now
$0 Shipping
Condition: New
Location: Aurora,NE,USA
BATTERIES. TOOLS& MORE CONTACT US WARRANTY INFO? Air Tools? Air Riveters? Air Saws& Blades? Compressors& Tanks? Grease Guns? Grinders& ... moreGinding Discs? Hammers. Drills& Screwdrivers? Hopper Texture Guns? Hoses. Reels& Accessories? Nail Guns& Nails? Paint& Spray Guns? Punch Flange Tools? Sand Blasters? Sanders? Sockets. Ratchets& Impacts? Automotive? Accessory Lights? Air Compressors& Portables? Air Horns? Auto Body& Frame? Auto Maintenance& Care? Diagnostic Tools? Electrical. Wiring& Testers? Jacks. Engine Stands& Hoists? Specialty Tools? Tie Downs? Tires& Wheels? Truck. Trailer& Accessories? Batteries? 12 Volt SLA Batteries? 12AH SLA Batteries? 17 18 20 AH SLA Batteries? 32 33 34 35 AH SLA Batteries? 4 4.5 5 AH SLA Batteries? 7 7.2 7.5 8 AH SLA Batteries? 9 10 AH Batteries? Misc. 12V SLA Batteries? 6 Volt SLA Batteries? 10. 12 AH SLA Batteries? 4. 4.5, 5 AH SLA Batteries? APC Computer Back Up Batteries? Motorcycle Batteries? 12N12A-4A-1? 12N12A-4A-1 AGM? 12N14-3A? 12N7-3B? 12N9-4B-1? 12N9-4B-1 AGM? 6N2-2A? 6N2A-2C? 6N4-2A? 6N4B-2A? 6N5.5-1D? 6N6-1B? 6N6-3B? 6N6-3B-1? B54-6? YIX30L? YT12B-BS YT12B-4? YT14B-BS YT14B-4? YT7B-BS YT7B-4? YT9B-BS YT9B-4? YTX12-BS? YTX12A-BS? YTX14-BS? YTX14AH-BS? YTX14AHL-BS? YTX14L-BS? YTX16-BS-1? YTX20-BS? YTX20L-BS? YTX24HL-BS? YTX4L-BS? YTX5L-BS? YTX7A-BS? YTX7L-BS? YTX9-BS? YTZ10S? YTZ12S? YTZ14S? YTZ7S? NiCd Batteries? AA NiCd Button Top Cells? Sub C NiCd Cells w/Tabs? Optima Blue Top Batteries? Optima Red Top Batteries? Optima Yellow Top Batteries? Other Batteries? Power Wheel Batteries? Replacement for GREEN Battery? Replacement for RED Battery? Replacement Dewalt Batteries? 12 Volt Dewalt Replacements? 14.4 Volt Dewalt Replacements? 18 Volt Dewalt Replacements? 24 Volt Dewalt Replacements? 9.6 Volt Dewalt Replacements? Replacement Lincoln Batteries? 12 Volt Lincoln R
$
189.08
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
149
Buy It Now
$0 Shipping
Condition: New
Location: Madison Heights,MI,USA
$
34.99
Buy It Now
$0 Shipping
Condition: New
Location: Suwanee,GA,USA
You are buying a Used Wilton Columbian#4 Drill Press Vise with Stationary Base. It is not marked where it is made. But maybe USA? This item is used but ... morein really great condition. Please look at all pictures for more details. We Prefer PayPal and please submit your payment within 24 hours of auction end. We usually ship with USPS 1st Class or Priority mail as standard shipping. And will ship with USPS Express Mail if you choose to pay for that. We try and ship by next business day. Typically the same day, after payment is received We will ship to any country outside of the 50 United States IF YOU PAY FOR THE SHIPPING. Feel free to email us with any concerns or questions through the"Ask Seller A Question" option available in this listing. Thank you for considering shopping with us.
$
68.85
Buy It Now
$17 Shipping
Condition: New
Location: Houston,TX,USA
$
158
Buy It Now
$0 Shipping
Condition: New
Location: Madison Heights,MI,USA
$
76.95
Buy It Now
$0 Shipping
Condition: New
Location: Bellingham,WA,USA
ebay template Grizzly G1064 Cross Sliding-Vise. Click for more Pictures This item is open box. It does not appear to have been used before but there are ... moresome marks on the detachable plastic cranks. The item is well oiled and seems to work properly. 100% Satisfaction Guarantee If there is an error between what you received and the listing. Feel free to contact us during our business hours and allow us to resolve your issues before leaving us bad feedback. Business Hours: Monday- Friday 10:00am-5pm EST Local eBay Pickup: Buyers MUST present the Paypal receipt and photo ID upon pickup. Sorry. But we only answer emails and phone calls during our business hours. We offer a 14 day Money back or Exchange. EXCLUDING AS-IS/ For parts items. If there is a shipping damage. Please contact us as soon as possible so we can arrange return with shipping company. THANK YOU AND HAPPY BIDDING! Please bid only if you agree on our terms. Continental US Shipping Only. Seller reserve the right to choose method of shipping without notice. No sale outside continental US. No AK. HI, PR, GU, VI or APO/FPO shipments. We will only ship to a Paypal CONFIRMED address. Please make sure your address is up-to-date before comfirming payment We will attempt to ship your item within 48 hours after payment has been received. This item is eligible for pickup unless otherwise stated. We do not ship to any destinations that are not specified here. Refer to our pickup schedule for available times to schedule a pickup. If you are the winning bidder of pick up item. You can schedule a pickup time following checkout. GA customers will be charged 6% SALES TAX. United States USD 0.00 Handling Fee: $0.00, To be eligible for combine shipping discount all the items must end within three days of the first item. Please send us a invoice request for combine shipping once the auction ends. Note that some items like TVs are not eligible for combine shipping discount. Winning bidders must make payment within 3 days. Payments not received will automatically hav
$
64.95
Buy It Now
$0 Shipping
Condition: New
Location: City of Industry,CA,USA
BATTERIES. TOOLS& MORE CONTACT US WARRANTY INFO ▫▫ Air Tools ▫▫ Air Riveters ▫▫ Air Saws& Blades ▫▫ Compressors& Tanks ▫▫ Grease Guns ▫▫ Grinders& ... moreGinding Discs ▫▫ Hammers. Drills& Screwdrivers ▫▫ Hopper Texture Guns ▫▫ Hoses. Reels& Accessories ▫▫ Nail Guns& Nails ▫▫ Paint& Spray Guns ▫▫ Punch Flange Tools ▫▫ Sand Blasters ▫▫ Sanders ▫▫ Sockets. Ratchets& Impacts ▫▫ Automotive ▫▫ Accessory Lights ▫▫ Air Compressors& Portables ▫▫ Air Horns ▫▫ Auto Body& Frame ▫▫ Auto Maintenance& Care ▫▫ Diagnostic Tools ▫▫ Electrical. Wiring& Testers ▫▫ Jacks. Engine Stands& Hoists ▫▫ Specialty Tools ▫▫ Tie Downs ▫▫ Tires& Wheels ▫▫ Truck. Trailer& Accessories ▫▫ Batteries ▫▫ 12 Volt SLA Batteries ▫▫ 12AH SLA Batteries ▫▫ 17 18 20 AH SLA Batteries ▫▫ 32 33 34 35 AH SLA Batteries ▫▫ 4 4.5 5 AH SLA Batteries ▫▫ 7 7.2 7.5 8 AH SLA Batteries ▫▫ 9 10 AH Batteries ▫▫ Misc. 12V SLA Batteries ▫▫ 6 Volt SLA Batteries ▫▫ 10. 12 AH SLA Batteries ▫▫ 4. 4.5, 5 AH SLA Batteries ▫▫ APC Computer Back Up Batteries ▫▫ Motorcycle Batteries ▫▫ 12N12A-4A-1 ▫▫ 12N12A-4A-1 AGM ▫▫ 12N14-3A ▫▫ 12N7-3B ▫▫ 12N9-4B-1 ▫▫ 12N9-4B-1 AGM ▫▫ 6N2-2A ▫▫ 6N2A-2C ▫▫ 6N4-2A ▫▫ 6N4B-2A ▫▫ 6N5.5-1D ▫▫ 6N6-1B ▫▫ 6N6-3B ▫▫ 6N6-3B-1 ▫▫ B54-6 ▫▫ YIX30L ▫▫ YT12B-BS YT12B-4 ▫▫ YT14B-BS YT14B-4 ▫▫ YT7B-BS YT7B-4 ▫▫ YT9B-BS YT9B-4 ▫▫ YTX12-BS ▫▫ YTX12A-BS ▫▫ YTX14-BS ▫▫ YTX14AH-BS ▫▫ YTX14AHL-BS ▫▫ YTX14L-BS ▫▫ YTX16-BS-1 ▫▫ YTX20-BS ▫▫ YTX20L-BS ▫▫ YTX24HL-BS ▫▫ YTX4L-BS ▫▫ YTX5L-BS ▫▫ YTX7A-BS ▫▫ YTX7L-BS ▫▫ YTX9-BS ▫▫ YTZ10S ▫▫ YTZ12S ▫▫ YTZ14S ▫▫ YTZ7S ▫▫ NiCd Batteries ▫▫ AA NiCd Button Top Cells ▫▫ Sub C NiCd Cells w/Tabs ▫▫ Optima Blue Top Batteries ▫▫ Optima Red Top Batteries ▫▫ Optima Yellow Top Batteries ▫▫ Other Batteries ▫▫ Power Wheel Batteries ▫▫ Replacement for GREEN Battery ▫▫ Replacement for RED Battery ▫▫ Replacement Dewalt Batteries ▫▫ 12 Volt Dewalt Replacements ▫▫ 14.4 Volt Dewalt Replacements ▫▫ 18 Volt Dewalt Replacements ▫▫ 24 Volt Dewalt Replacements ▫▫ 9.6 Volt Dewalt Replacements ▫▫ Rep
$
59.99
Buy It Now
$12.8 Shipping
Condition: New
Location: Eagle,ID,USA
$
76.99
Buy It Now
$0 Shipping
Condition: New
Location: Suwanee,GA,USA
ebay template T& T Trading Group LLC, Jet 70440 JET-40 40-Inch Parallel Clamp. Retails for $66.86. ITEM: Jet 70440 JET-40 40-Inch Parallel Clamp CONDITION: ... moreGood Condition. Product is in open retail packaging. Slight bend in clamp. Sturdy and powerful 40-inch. 1,000-pound clamp ideal for both clamping and spreading Non-marring composite resin jaw faces Moveable rail stand/end stop Turns easy without binding Reversible clamping. Converts clamp to a spreader Manufacturer: Jet 70440 JET-40 40-Inch Parallel Clamp, Model: Our Goal is 100 Percent customer satisfaction. We love repeat customers. If for any reason you are not completely satisfied with your purchase please contact us asap and we will make it right for you. We leave positive feedback as soon as your item is paid for and we would appreciate 5 star positive feedback once you get your item and inspect it. If you are thinking of leaving anything less then positive feedback and 5 stars please contact and give us a chance to resolve the issue for you. We DO NOT ship internationally. Items must be paid for within 48 hours of the end of the auction. If items are present after 7 days from sale date. They will be re-listed. NO EXCEPTIONS. To Help enforce this we have ebay Case manager enabled. An unpaid item case will open up Automatically after 48 hours of non payment. SEE POLICY BELOW IF YOU ARE HAVING AN ITEM SHIPPED BY FREIGHT. Freight items are usually items over 150lbs FREQUENTLY ASKED QUESTIONS RETURN POLICY Q: What Is Your Return Policy? A: We offer a 14 day return on all defective items. If there is an issue with your order. Just contact us- we'll either send you a replacement or issue a full refund. Q: Do I Need To Contact You Before Returning An Item? A: Yes. You must contact us before returning any item. Q: How Does Return Shipping Work? A: Return shipping is FREE for all defective returns. We include a pre-paid USPS or UPS Return Label as part of the RMA email(US Only) Freight Items are not included in the Free return shipping policy Q: Do You Ch
$
98.95
Buy It Now
$0 Shipping
Condition: New
Location: Bellingham,WA,USA
$
19.99
Buy It Now
$0 Shipping
Condition: New
Location: Long Beach,CA,USA
$
159.99
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
22.39
Buy It Now
$0 Shipping
Condition: New
Location: Hebron,KY,USA
$
49.99
Buy It Now
$12.8 Shipping
Condition: New
Location: Eagle,ID,USA
Untitled Document Description Item: Pro Vise Stop Single Side(Model: 03-000) Condition: New in Box. Specifications Designed for use with Kurt style 6 ... morein vises(3-7/8" center to center distance) Versions for 4" 5" vises also available Low profile design stays below the top surface of vise jaws for cutter clearance Versatile design allows the 1/4" hardened stop rod to be quickly and accurately positioned Lever arm can be rotated out of the way for cutter clearance and accurately relocated for repeat setup Two sets of mounting holes for added versatility Locate long stock with the included stop rod collar Non-marring 1/4"20 nylon tip set screw used to secure stop rod mount without damage to lever arm Non-marring 1/4"20 flat point set screw used to secure stop rod without damage Body made from red anodized 6061-T6 aluminum, Double side versions also available Pro Stop The Pro Stop by Edge Technology Products is the world's first vise stop with the CNC machinist in mind. Its super low profile design stays completely below the top surface of the vise which means that you do not need to worry about it interfering with the cutting tool paths. Whether you are making 10 parts or 10.000 parts the ultra rigid Pro Stop will not move once you lock it down. It is an ideal datum surface to locate your parts. The Pro Stop is extremely versatile allowing you to quickly position the hardened steel contact rod in any location you need it. If you need a vise stop that adjusts to your every need, then you need the Pro Stop! The Pro Stop is CNC machined to exacting tolerances from 6061-T6 aluminum. The components is hard red anodized to resist wear and provide years of service. Patent Pending. Payment& Shipping Payments Accepted: Paypa l Shipping USPS. See Shipping and Payments tab for details. Note: If multiple items are purchased from our store we will combine shipping. Please request a package invoice before you pay. International: Worldwide shipping available. See Shipping and Payments tab for d
$
28.22
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
42.95
Buy It Now
$7.9 Shipping
Condition: New
Location: Arlington Heights,IL,USA
$
27.96
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
1 2 3 4 5 6 7 8 9 10
 In 

Past Items  
 
You are bidding on a slightly used Renzetti Traveler 2200 pedestal fly tying vise($194.95 retail) w/ optional Material Clip($9.95 retail) I bought a Marc Petitjean Swiss Base Vise shortly after purchasing this vise. I thought I would use this vise in the Camper. While out on our Trout Adventure weekends. So far, the vise has just sat in the box for the last two years. This is a great vise, in mint condition, and really should go to a good home where it will be appreciated.
Too much fly tying supplies to list. You get all that is pictured. Posted with
This is a used Thompson vise with some tying tools The jaw is in good condition It is being sold as is and no returns
The best buy on the market. Giving true rotary action and other features that cost much more on other fly-tying vises. The jaws swivel on two ball bearings to bind the materials around the hook when it rotates, making it faster and easier to tie professional-looking flies. The jaws, made of top-quality, tempered steel, hold hooks of all sizes completely immovable, yet open and close using a simple cam-arm system. Comes with a bobbin rest/wire holder that's indispensable for creating top-quality patterns. Includes C-clamp. Used but in great shape. I lately had the jaws reground. I love this vise but it doesn't see much use lately. I used it for tying dry flies. Small nymphs. Good Luck Bidding!
EVERYTHING HERE IS IN EXCELLENT CONDITION. APPEARS BARELY USED. NO DAMAGE OR ISSUES. THE BENCH IS 21" WIDE. IT COMES WITH EVERYTHING SHOWN BUT ONLY WHATS SHOWN. I DONT HAVE ANYTHING ELSE TO GO WITH IT.
Large Lot of Fly Tying Materials and Tools Universal Sunrise Table Vise"Universal Fly Tying Guide" by Dick Stewart Eight No. 3001 flies Six No. 3003 flies 3 Spools Tying Thread Spool Holder Glue Bottle 2 Picks Wax Packages of Materials: White Saddle x 2 Tan Saddle Mallard Muskrat Hare's Ear Dubbing Red Fur Yellow Fur Matural Bristle Peacock x 2 Gazelle Fur Cock Neck Feathers White Ornamental Feathers Barred Feathers x 2 Yellow Feathers Green Feathers Natural Wing/Tail Feathers Assorted Imit Woodduck Colored Felt Coil Antron Blend Amber Antron Blend Brown I ship Priority Insured.so you'll get it before Christmas! See my 100% Feedback and bid with confidence
You are bidding on a pre-owned very lightly used Rotary Fly tying vise. This particular brand is very high quality and made in the USA. Has the original box. Instruction manual warranty card, and even plastic bag. Great for fly tiers of any skill level.
Up for auction is a THOMPSON HEVY JAWS(only) for use on the Thompson fly tying vice. These jaws show some light wear but will work just fine and they are very easy to change out. Again this auction is for the jaws only. The jaws ship in a bubble envelope mailer. 0 false 18 pt 18 pt 0 0 false false false PLEASE READ PLEASE READ PLEASE READ PAY PAL IS THE ONLY PAYMENT I WILL ACCEPT. NO INTERNATIONAL SALES- DO NOT PAY UNTIL I SEND YOU AN INVOICE! I expect payment within 3 days after the auction has closed. I reserve the right to re-auction an item after the 3 days unless I hear from you. I try to describe an item as best I can so please E-mail me through"ask a seller a question" before you leave me a negative feed back so we can solve any problems. If you want it shipped priority. Or express mail please e-mail me to let me know as ... moresoon as you win the bid and I will send you an invoice with the corrected postage. Remember media or standard shipping is slow so have patience if that is the method you choose. NOT RESPONSIBLE FOR UNINSURED PACKAGES I will combine shipping on two or more of my items(within 7 days of each other) so E-mail me and let me know that is what you intend to do. With calls and some books the shipping and handling will usually be $1.00 for each additional call or book. You must notify me first to get the price brake; I will send you a final invoice with the combined shipping and final price. I will ship an item within 48(business) hours of receiving your payment. THANK YOU FOR BIDDING AND GOOD LUCK
Faded Fly Template Dyna-King the Prince Fly tying Vise(pedestal model) This is one of the vises we have been using for our tying classes. They are great for folks wanting a Dyna King on a budget. We have never had a problem with any of the vises we are using. Bid with confidence. The PRINCE is a compact and light weight vise with a large base. The head angle is set at a 30 degree complete with a 360 degree rotation and a built in material clip. Constructed with solid stainless steel materials and a rotary friction screw. Available in your choice of Pedestal or Clamp base. SALE PRICE $195.00 original MSRP $219.00. We are a full serivce Dyna-King dealer. If there is something you need please give us a call. Toll Free 1-855-323-3335 Trade up program: Our trade up program is quite simple. Tell us what you have, we offer you either a buyout price ... moreor our best trade in price. You get the new equipment you want. We will match or beat anyone’s deal on any item that we carry. Just that simple! See more great deals on Fadedfly.com Please feel free to call with any questions you may have. Toll Free 1-855-323-3335 SHIPPING: We offer FREE US shipping by USPS After you have won an auction or used the BUY NOW option. An instruction email will be sent to your eBay registered email address. After"Checkout Complete" you'll be redirected to Paypal to pay the Invoice. Payment- All payments must be received within 24 hours of Auction Close. If there are any challenges. Please take a moment and let me know. I am willing to work through just about any circumstance. If you know there will be issues, please call TOLL FREE before purchasing any of our items. Postage- Postal charges are clearly shown within the auction listing. Please bare in mind that our postal charges include more than the price of a stamp and includes actual postage costs. Packaging and handling. If you bid, you are deemed to have accepted the shipping charges quoted. International shipping may be subject to import duties or other taxes that are beyond our
Up for auction is this Nice large collection of fly tying gear. It all has very little use. What you see is what you get so please ask questions the photos don't answer and payment is due 48 hours after winning! Thanks
Years of acvcumulation went into this kit. There are some VERY interesting materials in this lot. Some cool Australian possum. Moose, elk, deer and some I'm not so sure of. There is a mix of old and new materials and tools. Cool old'Airex' vise in perfect working order and a brand new'AA' I don't know much about this kit, but here is what I can tell you. There are: 2 vise 16 tools- bobbins. Hackle pliers, scissors, bodkin, threader, hair stacker and MORE! See pics. 100's of hooks- dry. Wet, nymph and scud/shrimp brass beads dubbing tinsel Australian opossum elk. Moose and deer hair necks of hackle thread peacock hurl foam bodies Plumes Marabou Thread Krystal flash and MORE! Please have a look at all the pictures. I have taken photos of everything in this kit. You get everything in the pictures. Ask any and all ... morequestions prior to bidding. Thanks for looking
Universal Vise Corp Professor Fly Tying Kit#3-used. This kit is filled with fly tying equipment and supplies-looks like way more than what came with the original kit. It includes a complete Universal Fly tying Guide. The actual tools to hold the ties while being tied/wrapped(clamp, spool holder, little plastic bottle, scissors, clamp, awl) spools of thread, packet of"real eyes nickle" packages of colored Northern Deer tail, package of Umpqua"Strung Marabou White" pkgs of Universal Vise Corp Brown Antron Blend and Dry Fly Neck, Saddle and 4-5 other smaller packages of different material and some hooks. I'd say that the overall condition of the itrems/material is very good-the box is complete but does show wear and one corner is split. There is an unusual order when you open the box-I assume its from the deer tails? ... moreNOTES: I will gladly combine shipping whenever possible to offer you the lowest reasonable cost possible Payment is by Paypal and must be made within 5 days unless other arrangements have been made beforehand. We put delivery confirmation on any item over $10 in final value. If you want it insured. You will have to pay extra for that. Return Policy. While our return rate is extremely small. It can happen for a number of good reasons. When it does, we will ONLY refund the purchase price of the item(s) and the initial shipping cost after we have received the item(s) back. We DO NOT refund the return shipping costs. All shipping costs are based on US deliveries. We do sometimes ship internationally but shipping cost are higher and we require that it only be shipped by priority mail so that it can be traced if need be. We strongly encourage you to ask for a shipping estimate BEFORE you bid. We ship on Monday. Wednesday, and Friday. Any international shipments must be paid for through PAY PAL only and actual shipping costs will be determined upon winning bid. It is always better to email me with your questions BEFORE you bid. I generally answer your questions within hours and try as b
Awesome lot of Fly Fishing Equipment and 2 nice Fishing Bags In this lot contains the following and probably more: DHT Fly tying vise and bobbin. Sports Afield bonoculars, 2) May-Fly dry fly spray, 2) mepps aglia lures, 2 new) spin-flies spinners, 2 new) Triple Teazer lures, 2 used) flat fish, 1) used rooster tail, 1 new) leather belt pole holder, 1) small compass, 1) pair of fishing glasses, 1 new) needle fish lure, 1 new) chapstick, 1) Benadryl stick, 1) fly line dressing, 4) spools thread, 1) yarn, 1) needle nose pliers, 1) small snips, 1) Tie-Fast Knot Tyer, Misc Mucilin containers, 4) hemo-stadts, 2) nail clippers, 1) small tape measure, 1) Ketchum Release Tool, 3) splinter removers/nail clipper, 1) bottle of Iodine Tablets(50 ea) 1) pack of knotless leader 6.4lb 3 ea, 2) small Plano boxes, 1) bottle floatant, 1) bottle Doug's Head ... moreCement, 1) Tye-Master, 1) pack of size 6 tying hooks 25 ea, and 2 very nice Green tackle bags made by Atlantic. There are a few other things, bandanas, and misc. I will ship this all in the tackle bags and then in a big box. The cost of shipping will be determined by where you live. Thanks for looking
2 fly tying kits by Universal Vise of Massachuetts& Tack-L-Tyers of Illinois Click Images to Enlarge Up for auction are two(2) commercial fly tying kits made by different manufacturers. I have no idea how complete these are so consider them used. Included are: Fly Tying Kit. 461 by Tack-L-Typers of Evanston, Illinois- box measures 12" x 9" x 2" box contains an assortment of feathers, hardware and paint bottles(5) plus an instruction sheet. The paint in the bottles has dried so is probably not usable. The box is complete but shows wear particularly around the edges and 1 corner seam has partially torn- nice graphics on box top. Bantam 1 Fly Typing Kit by Universal Vise Corporation of Westfield. Massachuetts- 14" x 9" x 1-3/4" contains an assortment of feathers, hardware(including vise) and a bottle of laquer(looks ... moreusable) all still in original bags. Also has a nice instruction booklet. The box is complete and shows some light wear but 3 of the 4 corners have split. PLEASE READ THE TERMS OF SALE BELOW BEFORE BIDDING WHICH APPLY TO BOTH STATESIDE AND INTERNATIONAL BIDDERS! TERMS OF SALE: 1. INTERNATIONAL BUYERS NOTE: Import duties. Taxes and charges are NOT INCLUDED in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. I will NOT under-value merchandise or mark the item as a gift on customs forms as doing so is against U.S. and international laws. If you are going to bid on this listing. You are accepting this condition of sale. 2. I DO NOT end auctions early in answer to offers. buy it now' propositions, etc. 3. SAVE ON SHIPPING! I will combine items for shipping which END ON THE SAME DAY to reduce shipping costs so if you are a multiple item winner. DO NOT use the auto checkout for each item as I will email you a combined shipping cost to save you money! NOTE: If you do not want combined shipping. I will ship items ind
Quality HMH API Fly Tying Vise with clamp base. HMH A.P.I. vise. manufactured between 1981- 1994. Rotary vise manufactured by A.P.I. Cam lever says"HMH A.P.I. It is the redesigned model by HMH that has 2 set screws on the head to adjust the head angle. Has a"micro jaw" in place(this alone sells for $34.00) Not sure if the desk clamp piece is original. It has no markings on it at all. Vise is in very good condition. The head of the vise is excellent. The piece that attaches to the head to the standing rod shows some very slight wear on the finish. This item came from several large sporting goods estate s that we were able to purchase, so please check our other listings and future listings for lots of fishing. Fly fishing and fly tying items. Lots of vintage and brand new stuff!
Renzetti 3000 Rotary Vise. Great for smaller flies as jaws take up little room. Great shape with only a few blemishes on pedestal base. Comes with set of three jaws. Original box included.
Estate find vintage Regal fly vise. Vise has small chip in jaws but holds hooks firmly when inserted correctly, i tied a few size 6 wooly buggers to test and jaws hold a hook like a regal vise should. The stem is 4 1/2" in length which is suitable for a pedistal base, what you see in the pictures is what you get. Thanks for looking! I accept paypal only. Item ships U.S.A. only, ships usps delivery confirmation.
This Item is a package deal. Which includes all of the following-Deluxe regal Vise. Umpqua scissors, two bobbins with spools of 6/0 thread on them, whip finisher, deluxe hair stacker-multiple packs/Tiemco Salmon/Steelhead wet fly and streamer hooks sizes 2, 4, 6, 8-Tiemco dry fly hooks size 12, 20,and 22. tying materials-Marribu colors red, brown and chartruse-phesant tail, turkey feathers, peacock feathers with eyes and some sword, 3 packs of krystal flash, assorted chanelle in multiple colors including crystal flash chanelle for salmon/steelhead pink, blaze orange cotton candy and more, large gallon size ziplok bag of deer, Elk, moose and carribu body hair all of which are unopened in original individule packages-nice assortment, large piece of blaze orange foam, bead chain eyes brass and chrome one pack of lead plate and half a spool of ... moreheavy lead wire, some second grade hackle feathers-medium brown, plus scraps of this and that and some extra odds and ends! all of which makes this a killer grab bag of a bunch of good stuff for anyone who ties flys especially if you're just starting out! These items are spendy and i highly recomend taking advantage of the deal on these goodies! I hope you enjoy this stuff and put it all to good use!
For sale is a used Terra fly tying vise. Comes with the standard C-clamp mount and also includes the optional pedestal base. Jaws are solid and holds hooks well. An ideal vise for tying larger flies for bass and saltwater. But I have tied trout flies down to size 12 with it. Selling because I have recently upgraded to a Renzetti vise.
ORIGINAL THOMPSON FLY-TYERS VISE. IN ORIGINAL BOX- PRO VISE MODEL This item comes as seen with everything shown. Most items are still in the original package and are unopened.
For sale is a used Renzetti Apprentise Vise for hook sizes 14-2/0. This vise is not for small flies and would be great for small streamers. Comes with original packaging and clamp for desk placement. Please message with any questions.
Nice looking. Curved, cast iron vise. A bit of surface rust and a few paint splatters. Powered by The free listing tool. List your items fast and easy and manage your active items.
Excellent condition with a spool of green nylon rod winding thread. Powered by The free listing tool. List your items fast and easy and manage your active items.
FLY FISHING VISE BY SUNRISE INTERNATIONAL TAPERED JAWS ARE DESIGNED TO HOLD HOOKS SECURELY FROM A 6/0 CADMIUM PLATED SALTWATER HOOK. DOWN TO A NUMBER 22 MIDGE. THE GROOVED SHANK ENABLES YOU TO ROTATE THE VISE WITHOUT ALTERING THE HEIGHT ADJUSTMENTS. GOOD SHAPE AND INCLUDES ORIGINAL BOX TOP AND INSTRUCTIONS. Check my Feedback: 100% and FAST Shipping! 14 Day Return Policy too!
~ HUGE LOT Fly Tying Kit ~ ~ with Offset Rotary Vise. Tool Caddy, and LOTS of Materials ~ ~ COMPLETE! ~ This is not a formal kit but contains everything you need to start tying flies. Some of these items are new; however most are used. But all have plenty of serviceable life left. I am no fly tying expert, but I can list the items- some I've simply taken the name from the label. Questions indicate what I think they are, but I'm not sure. Please ask any questions for details. Kit/Lot includes the following items: I hope this doesn't remove the element of mystery/surprise when you open the box! Tools: Offset Rotary Vise w/C-Clamp(used but in very good condition; photoshopped into the lot photo. See other photo) Tool Caddy(homemade. Real wood; not shown in lot photo, see other photo) Flared-tip 4" Bobbin[new] Hackle Pliers. ... moreNon-slip[new] Bodkin& Threader combination tool, 4.5" Scissors[new] 4" Scissors, Thompson-style Whip Finisher. Large[new] Hair stacker. Black anodized aluminum[new] Leatherette pouch. 4" sq. Tweezers, Fly Tying Head Cement. Goo Thinned, 6ml oz bottle- not pictured] NOTE: Fly Tying Book is not included. But one is available for $12 more s/h included. Please ask for invoice. Fly Tying Made Clear and Simple" Skip Morris. Hooks: 125 hooks) Kobe Japanese Hooks: Dry flies#12(25 ct) Kobe Japanese Hooks: Wet flies#14(25 ct) Kobe Japanese Hooks: Streamer flies#10(25 ct) Kobe Japanese Hooks: Nymph flies#14(25 ct) Kobe Japanese Hooks: Curved Shank flies#16(25 ct) Brass Beads. Assorted sizes and colors(40) Thread Spools: most appear unused) Black Thread, Dk. Brown Thread, Flame Orange Floss, French Tinsel. Flat large, silver, UTC Wire Green medium, Feathers: 1/2 Cape Grizzly, 1/2 Cape Dark Dun(half of a Metz#1 cape) Hen Cape Badger, Hen Cape Dyed Black, Brown Hen Cape Fragment, Strung Saddle Hackle- badger, Strung Saddle Hackle- white, Purple Hackle, Hackle Packet(small) black, Black(Small) Hackle Feathers, Grizzly Body Feathers(wet hackle) Peacock
You are bidding on a partially used lot of fly tying materials. Orvis vise Orvis fly tying booklet several flies in excellent condition– use them or clip off the materials and have some hooks to tie your own flies with! A whole ringneck pheasant cape thread. Chenille, feathers, etc. CHECK MY FEEDBACK AND BID WITH CONFIDENCE!
HERTER'S No 11 Fly T ying Vise Clamp Trout Lure Tool Vintage c ast i ron f ly t ying v ise clamp Measures 9 in.at shortest point See my lis tings for another fly t ying vise Combined shipp ing a pleasure and a savings for the bidder
Simple. Sturdy, cast iron vise. The only condition issues I see are a paint slatter and a couple of small rust spots. Powered by The free listing tool. List your items fast and easy and manage your active items.
Fly tying bobbin with 2 spare spools. The bobbins have no identification. But t hey appear to Nor Vise brand. This item came from several large sporting goods estate s that we were able to purchase, so please check our other listings and future listings for lots of fishing. Fly fishing and fly tying items. Lots of vintage and brand new stuff!
We are Momentum Store! We having been purchasing items and estates for years now and have over 10 years of positive Ebay experience combined. Our storage facilities are FULL of amazing finds from antiques. Oddites, vintage items, new items, estates, and all the like. We have joined forces together to liquidate ALL inventory- so you find a wide arrange of items at any time- So check us regularly! And always feel free to message us regarding any items we may have, your interested in, or with any questions or concerns! Communication is key to successful relationships here on Ebay! GOOD LUCK! Any items sold during the Holiday Weekend will ship the following Monday- Otherwise handling time is usually 3 days max. Shipping is calculated- any difference in actual shipping will be refunded Please read ENTIRE listing and ask ANY questions prior to ... morebidding/ purchasing Feedback is posted after receiving feedback Negative and Zero feedback members should contact me prior to bidding to avoid bid cancelation After 7 days of auction. If no payment or communication, item will be relisted and unpaid case filed Lower 48 prefered- Alaska and Hawaii excepted. But may need shipping adjustments- No international shipping PLEASE REFER TO PICS AND ASK QUESTIONS PRIOR TO BIDDING TO ENSURE BEST JUDGEMENT VINTAGE FLY TYING STATION/ BENCH SUNRISE CLAMP/ VISE FEATHERS OF ALL SORTS LINE AND STRING A FEW TOOLS FOR TYING SOLD AS IS- AS FOUND- AS PICTURED- EVERYTHING IN PICTURES INCLUDED
From its warm. Earth tone, light absorbing finish to its 11 spherical hole pattern accessory bays, the Thompson Cobra Vise proudly takes its place within the long tradition of industry changing vises, tools, and accessories that D.H. Thompson is known for. Features: 5 lb. steel base for maximum stability. Nine options for easy positioning allow for optimal housing of your mirror. Hackle gauge, and other accessories. An easy grip handle on the neck allows you to alter the angle on your jaw a full 360 degrees at the touch of a finger. The remarkable Torque jaws accept an extremely wide range of hook sizes, from 28-4/0 plus! This vise comes equipped with the following optional accessories: Cobra Fully adjustable 2.5X Magnification Mirror. For optimal viewing while tying. Cobra Bobbin Rest. Hackle Gauge. Carrying case. This vise has been gently ... moreused by myself and is well taken care of. I received another vise that I use more often as a gift and this Cobra hasn't seen much use as of late. A good vise with a lot of valuable accessories. Purchased new this vise and it's accessories are worth over $230. Good Luck bidding! Ed.
THIS IS AN OLDER FLY TYING VISE MADE BY METAL SPECIALTIES. THERE IS SOME SURFACE RUST ON THE ITEM HERE AND THERE. THE VISE IS IN GOOD WORKING CONDITION. THE LOT ALSO CONTAINS 3 FISHING JIGS. THE VISE IS MADE IN ATHOL MASS. USA. PLEASE EMAIL WITH QUESTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items.
Regal standard 360 rotary with pedestal pocket base. It's a classic in excellent condition! New one costs $220. Posted with
Normal 0 0 1 135 771 6 1 946 11.1539 0 0 0 Smoky Hill Fly Tying Club Vise#2 Heavy Pedestal Base For Fly Tying Vise Fits Fly Tying Vise's w/ 3/8" Dia shaft The Smoky Hill pedestal may be used with any vise having a 3/8” stem. It is constructed of heavy steel weighing approximately 2 1/2 lbs. It has a felt pad on the bottom to protect against scratching the family Kitchen table or den deck. Knurled Post w/ 1/4-20 lock Screw. Measures 4" wide x 5 1/ 4" Long& 3" high* TyingVice NOT INCLUDED* THIS IS BEING SOLD as-is with no returns or exchanges. Ask any questions before biding. PayPal is preferable! Thanks for looking! Payment: I accept payment through PayPal. Payment by personal check item will not be accepted. Feedback will be given after feedback is received. Sale will be canceled if payment is not received within ... more7 days& appropriate feedback will be given. Shipping: Buyer pays shipping& handling. USPS
Used Dyna King Squire vise with two mounts. Condition as follows: Label is missing from pedestal base. Larger knob added to side(aluminum block threads were stripped so I tapped the next larger size) Jaws are used but in good shape. Jaw tips are flat. Dyna King quality speaks for itself. Sorry US and Canada only. Canada shipping is $10, I'll enclose the difference if the shipping is less. Only one available. Posted with
ULTRA RARE- ULTRA RARE- ULTRA RARE 1980'S BILL HUNTER/ API HMH NUMBERED LIMITED EDITION VISE HUNTER'S HMH PREMIUM VISE CARRY PREMIUM BRASS PEDESTAL HEAVY DUTY PREMIUM"C" CLAMP LONG"C" CLAMP POST 3 VINTAGE HMH POLISHED JAWS MAGNUM MIDGE TROUT 1 HMH OMNI JAW DOCUMENTATION ABSOLUTELY PRISTINE MINT COMPARE QUALITY CRAFTSMANSHIP AGAINST TODAY'S HMH(Any Vise) TOOL. NOT A TOY. BILL HUNTERS' WORDS O ffered is the Very Rare and Seldom Seen HMH/API Limited Edition Presentation Vise System. If you have been looking for a Bill Hunter Numbered Vise and Missed Out. This is your opportunity to grab one of the most Stunning Set Ups of any Custom or Production Built Vises. Bill Hunter worked with API in the early days of the API acquisition of the HMH Co. As a matter of fact, there were API employees assembling HMH New ... moreBoston Vises in Bill's basement. For those that haven't seen up close and personal one of Bill's New Boston Numbered Vise or the API Numbered Vise, your in for a Treat! Built like a Tank yet a piece of Sculpture integrating Brass, Bronze and Stainless Tool Steel. The API Numbered Presentation Vise is in Mint Condition and comes with 4 Jaws Total. 3 being NOS Hunter Hand Lapped Vintage Jaws and 1 New HMH Omni Jaw. HMH Premium Brass Pedestal and Short Stem, in Excellent Plus Condition. HMH Ultra Stout"C" Clamp and Long Stem in Mint Condition. I'll include a Quality Copy of the API's Original Glossy Pamphlet(copied onto Glossy Photo Paper) For those wondering what happen to the'other' Limited Edition Vise, it sold at a show. P lease Note; I have listed the'Numbered' Vise as"Used" when in fact it's Never Been Used- The Majority of the Extra Jaws comes from my collection and are the Bill Hunter Hand Lapped Jaws which have not been used. A category for New Old Stock would be welcomed category and appropriate for this Exquisite Vise. P hotograph No. 12 IS NOT the Numbered Vise Offered. It is my Personal HMH Numbered Vise demons
Vintage Lot Thompson Fly Tying Equipment Tools Equipment Fishing Spool Vise You get all thats pictured in lightly used condition Will be shipped loose all together as seen in last picture Please read the entire auction page before bidding.Payment must be made with in 6 days of close of auction.I ship 3-5 days after payment has been made.Most problems I've had are with new ebayers with low feedback scores.Due to these problems if your score is less than 15 you must contact me first before you bid so that you fully understand the terms of the auction.Its very simple.you bid.You win.you pay.If you dont agree with the terms of this auction dont bid.I only ship to United States of America(USA)
Fly tying bobbin with a spare spool. The bobbin and spool have no identification. But t hey appear to be Nor Vise brand. This item came from several large sporting goods estate s that we were able to purchase, so please check our other listings and future listings for lots of fishing. Fly fishing and fly tying items. Lots of vintage and brand new stuff!
This is THE RENZETTI Traveler 2000 C-Clamp vise. Everything is in excellent working condition. This vise is Rock Solid. It has been a great vice. But unfortunately, we're moving and I don't have a spot for it in the new new place. I hope she goes to a good home. We've tied a lot of flies together and this vise is a pure joy to tie on. It shows very little wear& tear, and is in perfect working order. I purchased this vise a few years ago for $170. The vise will come to you in the ORIGINAL BOX. With instructions included. And. As an added BONUS, I'm including the material clip($10 if you purchase it separate) which is invaluable if you are using the rotary function. Buyer to pay $11.00 shipping. Good Luck and Good Tying(and Fishing!
This has been a great tying vise for me. It will be tough letting it go. Require something larger now. Offering a right handed Renzetti traveler 2000 vise kit with both pedestal base and C-clamp options. included Renzetti 6" extention stem Renzetti Midge hair stacker Renzetti Bobbin cradle Generic shears Hackle pliers Hook& hackle gage
You are bidding on a used TMC Tiemco Rotary Vise II. This includes the vise. Base, and 2 Allen wrenches. I was told that this particular vise is a prototype. I don't know what this means or why it may be so. Information on this vise is hard to come by because it has gone through so many levels of development and there are many variations. I'm no expert on this vise. But here's all I know. This is the best write up I've seen. http:www.tiemco.co.jp/english/products/flytying_vt.html This vise was used by one of TMC's representatives or employees in the Roseburg. OR, area. It doesn't look like it's had any hard use because it appears to be in very good condition. Serial number 000687. There are several ways to adjust this vise because of the incredible number of adjusting points. My picture#10 shows the maximum height. ... moreIt holds a hook very securely. This vise has the standard jaws for hook sizes 32 to 1/0. There are no instructions that come with this vise. The main objection to this vise seems to be the price. So here's your chance to get one at a reasonable price. Retail value on this vise is somewhere between $700.00 up to insane. I've posted 12 pictures. But let me know if you want some additional pictures. Please ask any questions you have before bidding. I will allow returns on this item. But you're going to have to pay postage and insurance in both directions. USPS Priority $15. I can't sayinsurance.But it is included. Free shipping on additional feather items. Tools, or hooks. Just pay the highest item shipping price. Used. T hanks for looking and good luck bidding. Let me know if you want to pick this item up in Medford. OR, and save the shipping charges. USA 50 states only. No sales to other countries or US Protectorates. Which includes: American Samoa, Guam, Mariana Island, Marshall Islands, Micronesia, Palau, Puerto Rico, U.S.Virgin Islands. Powered by The free listing tool. List your items fast and easy and manage your active items.
Bobbin& spool are about 20 years old(est) Purchased when Nor Vise was pretty new to the market. I got it new and used it quite a bit. Tensioner on bobbin does not seem as strong as new but still seems to be functional. But is weaker.only disclaimer. Posted with
Hello bidders and welcome. Today you will be bidding on a Thompson COBRA Fly Tying Vise with Accessories& Hard Case. Posted below are some features I found on a website. If you have any questions please feel free to contact us using the information at the bottom of this page. Thank you and Happy bidding. FEATURES: Welcome to a New Era in Fly Tying. Never before has a vise so functional and so stunning been available on the market. From its warm.Earth tone, light absorbing finish to its 11 spherical hole pattern accessory bays. The Thompson Cobra Vise proudly takes its place within the long tradition of industry changing vises, tools, and accessories that D.H. Thompson is known for. Experience the New Era of Fly Tying as form and function combine in one powerful tool no fly tyer should be without. 5 lb. steel base for maximum stability- ... more11 options for easy positioning allow for optimal housing of your mirror. Hackle gauge, and other accessories. An easy grip handle on the neck allows you to alter the angle on your jaw a full 360 degrees at the touch of a finger. The remarkable Torque jaws accept an extremely wide range of hook sizes. From 28-7/0! WHAT IS INCLUDED IN THE PURCHASE: Cobra Vise- Cobra Dual Material Clip- Cobra Hook/Hackle Gauge- Instructions and Guarantee Card- Carrying Case with foam insert- An Allen Wrench- Attachment Bar We are a pawn shop and every item we list came out of our store. As such it is used and we list it that way. We offer 7 day cash back where the buyer pays return shipping. We ship via FedEx on Tuesdays and Thursdays. All items will leave our shop by 6pm on those days after payment has been processed. We only accept U.S. buyers and we only ship to the greater 48 states. No exceptions. Our store hours are 9am to 6pm Monday through Friday. If you have any questions feel free to email us at our e-bay account or you can call us at 337-436-0892. Thank you and Happy Bidding.
Renzetti Rotary Fly Tying Vise RH Traveler Series T2003R. Very nice. Lightly used Renzetti vise T2003 right hand Fly Tying Vise with box. Powered by The free listing tool. List your items fast and easy and manage your active items.
Offering a Vintage D H Thompson Fly Tying Vise in good working condition with some minor surface rust. Also included is a line tying spool. Please review pictures for details. Thanks for LOOKING.
Thompson F fly tying vise.Tying tools and supplies Plano 5000 box functions properly with no breaks or cracks only normal wear. See photo's for condition and contents. Please ask any questions before bidding Item sold'as is' no returns' Thank you for your interest!
Italian Fly Fishing Vise Morsetto Edera Roberto Pragliola RP Made in Italy Hello. This is an auction for a fly fishing vise. It is roughly 7 inches in length. It can be used in two different ways. It can be attached to something using the clamp attachment, or you can use the other attachment and screw the vise into a piece of wood. I bought this at an estate sale. Shipping and handling is by USPS first class mail to the USA only. This listing is open to the USA only. Please email me if you have any questions. Thanks for stopping by!
Fly Fishing Vise For Holding Comb Hello. This is an auction for what I am guessing is a fly fishing vise. I bought a bunch of fly fishing items at an estate sale and this was with it, so I am assuming that it has something to do with making fishing flies. I looked on ebay but I could not find a vise that was similar. Shipping and handling is by USPS first class mail to the USA only. This listing is open to the USA only. Please email me if you have any questions. Thanks for stopping by!
Up for bid today is a used fly tying vise lamp. The 16" arm allows it to bend in any direction so you can get light just where you need it. The adjustable base fits directly on the vise up to 3/8" The 12W halogen lamp and AC power adaptor are included. This item has been tested and works properly. Feedback Rating Requirements: If you have significant negative feedback or have a feedback rating of less than five(5) Please contact us PRIOR to bidding or your bid may be cancelled. Bids from people with less than 90% feedback will not be accepted. Invoicing: E-bay automatically sends out invoices when an item is purchased or won by auction. If you require an invoice as part of your check out. Please contact us prior to payment and we will send you an invoice. If you make multiple purchases, once bidding is complete, please request a ... morecombined shipping invoice directly from us before making any payments. Failure to contact us or request a combined invoice will forfeit your option for combined shipping, and you must pay shipping on each individual item. For eBay auction listings(excluding eBay Motors) We accept Paypal and all major credit cards via telephone to(910) 208-9401 during our business hours. We also welcome local pickup of our items and payment can be made at our store. There is a $2.00 local pickup fee and for in-state buyers local sales tax applies. For eBay Motors listings: We accept bank transfers and certified checks only. Please use the eBay checkout button at the top of the auction once the auction has ended. Payment must be received within 7 days of the close of the auction. Items not paid for in full within the 7 day period will be relisted and the bidder will be reported to eBay as a non-paying bidder. If you have any questions about your auction winnings. Please feel free to call us during our business hours at the number above. Shipping for this auction is determined by eBay's shipping calculator at the bottom of the page. Your order is professionally packed and shipped FAST via our A
This auction is for one"Original D.H. Thompson Model"A" Fly-Tyer's Vise" in Original Box and in excellent condition. This also has the original paper put-out by Thompson"Fly Tying Fundamentals" in the box.This has been stored for over 20 years is why it shows very light use, this also has the manufacturer as D.H. Thompson.Elgin, Illinois, magic words.The box shows a little wear. we will mail to U.s. Canada.
This auction features one fly tying Table Mount Vise Grip. The unit works well and is perfect forthe person who needs to tye some flys for their flyfishing expedition. The unti does have a purple and silver manufacturing sticker on it but I can't for the life of me figure it. The screw mount to attach the unit to a table works. P lease ask all of your questions before bidding as to resolve any shipping or functionality issues in advance of the purchase. This item will gladly be refunded if for any reason it does not work upon arrival. The costs of shipping the item in both directions will still be the responsibility of the winning bidder no matter why the unit may be returned. The product must be returned before a refund will be given and must contain all parts that were included in the original auction to be refunded. Please check the ... moreunit when it arrives(within 3 days) because after which the unit will not be taken back. Thanks for your time and consideration on this item please ask questions as early as possible to insure they can be answered before the ending time of the auction. Although I usually ship faster then 5 Handling days sometimes I get a little behind and it does take that many days. The winning bidder will be emailed the Fed-Ex/USPS Tracking number when the item ships so they can track the unit to their door. Have a great Day! Freegrazerfive
Heres a Cool Vintage Fly Tying Vise Magnifying Glass Cast Iron Base Excellent Condition Fully Adjustable. nice tight joints. Glass excellent condition as well Good Luck if you bid Paul
As shown. Missing the piece on the end of the L shaped screw that goes tight to the table. Please feel free to ask any questions and thanks for looking!
Vintage Herter's No. 11 Fly Fishing Trout Vise Lure Tool Cast Iron 1940's 1960's Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Vintage Herter's No. 11 Fly Fishing Tying Vise- Cast Iron- Table Clamp- Trout fishing lure tool- Mounts to a flat surface- works perfectly- This was used specifically in the 1940's thorough 1960's- 7 1/2" long- excellent condition- Great fisherman collectible. Please look at all the details in the pictures. Thanks for looking. If buying internationally. Please contact for a actual shipping cost. Items must be paid within 3 days. If this is an issue please let us know before bidding. Please Ask Questions Before Bidding. Please also take the time to check my feedback. Combined shipping for additional items purchased. Thanks for looking! Items can only be returned within ... more14 days. Please contact us if a problem happens to arise when you receive your item before leaving negative feedback as we would be happy to help and resolve the issue if possible. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! Posted with inkfrog terapeak. I000000. InkFrog Analytics.
This is for everything in the pics.email questions asap buyer pays 11.00 s/h thanks Good luck
VINTAGE GOODELL& PRATT HAND HELD MACHINE VISE FROM PIANO TUNING TOOL(LOT#6) VINTAGE LOT OF PIANO TUNING TOOLS FROM ESTATE SALE. I HAVE SEVERAL LOTS TO SELL. I HAVE 5 LOTS UP FOR AUCTION ALREADY THAT ARE CLOSING ON 1-24(THURSDAY) CURRENTLY I'M ADDING 6-7 ADDITIONAL LOTS. THERE IS SURFACE RUST ON SOME OF THEM, I HAVE USED STEEL WOOL AND BRASS BRUSH TO CLEAN SOMEWHAT. YOU ARE BUYING LOT AS IS WITH NO RETURNS. PLEASE CHECK OUT THE OTHER LOTS I HAVE FOR SALE IN MY EBAY STORE: AUTO2HOME UNDER THE CATAGORY"OTHER" STORE LINK BELOW- JUST CLICK ON LINK WILL COMBINE SHIPPING Visit My eBay Store Add me to your Favorite Sellers View My Feedback Items can be combined for reduced shipping. For combined shipping you must wait to pay until I combine invoices for you and send you one(1) invoice with the total. Any questions. E-mail me. View ... moreMy Other Items For Sale Other items sold at my store include: Fire alarms. Fire alarm related items, Cleaning supplies(Dust Mops) Swimming pool fountains, gloves· Hardware: Robe hooks. Hinges, Spray Paint Gun Parts(i.e. Binks, Graco, Devilbliss) Plumbing supplies, Electrical supplies, 40 Tapper Tooling(DeVlieg) Filters, Spark plugs, Drill bits· Children& Collectibles: Dicast cars. Toys, toddler clothing· Clothing: Men’s and Children’s· Jewelry: Sterling Silver Rings(Womens) and many more one-of-a-kind items! DISCLAMER-ANY ITEM YOU PURCHASE FROM ME IS LISTED TO THE BEST OF MY KNOWLEDGE. I GUARENTEE ALL MY PARTS AND PRODUCTS HOWEVER HOW YOU USE THEM IS YOUR FULL RESPONSIBILITY. I AM NOT RESPONSIBLE FOR ANY USE OR MISS USE OF ANY ITEM YOU MAY PURCHASE FROM ME. Buyer Information Before You Bid: Please look over all pictures and email me with any questions before you bid. Please make an informed choice when you buy and item. I will give 110% to list each item exactly as it is with NO frills. I want you to be happy! Please do not bid if you don't intend to pay. Return Policy: If for any reason the item you receive is not as described and you notify me wit
This vice is in really good condition(Very lite scratches on the jaws) I did not use it very long until I was given a Renzetti for a gift! Danvise has a Rear handle crank that is for Full 360 Degree True Rotary Tying. It has a quick release Hook cam and can handle down to size 24 hooks. Also has an adjustable bobbin cradle!
Up for auction is a gently used. But in great condition, fly tying vise, I have recently moved to Arizona and have no use for it.
Vtg Thompson Rod Winding Vise.In Great Working Condition. Table Mount Fly Tying Vise.6 1/2" tall. Estate Find. Flytying vise is Unmarked.Works Great But Probably started Life as somthing other then the use this Gentleman put it to.
Used Renzetti Master Vise in excellent used condition. Perfect working condition comes with the bobbin cradle and the visual enhancement plate. Standard features of the Master vise are: True 360 degree rotation; adjustable rotary tension. Adjustable and hide away material clip, solid brass bobbin cradle support, anti-corrosion coated patented jaws, adjustable patented jaw hinge to accommodate the full spectrum of hooks. Stainless steel stem, precision dual ball bearing rotary head, advance rotary actuator. The Renzetti Master Vise is so named because it does it all. Featuring a patented jaw mechanism that will securely hold hooks from# 28 to a 10/0. This is the True Rotary Vise for the tier who turns out everything from tiny trout flies to feather duster size billfish offerings. If you are a production tier or a serious saltwater buff. This ... moreis the vise to own. The Renzetti Master Vise has the traditional rotary actuator that allows the tier to rotate the jaws by spinning the rotary arm. Without question, The Master Series is the most advanced and most versatile vise available today. International bidders.Vise will be shipped insured and declared for final sale price
I am auctioning a fly tying workstation which is 21" wide by 12" deep. It has a heavy wood base with what looks like a formica surface. It has two arms on each side which extends from the back to the front and has 5 holes in each arm which holds tools. Thread bobbins etc. There is 8 dowels across the back to hold spools of thread or wire. There is a magnetic strip to hold hooks and a block of wood with a hole in it to hold a bottle of head cement. The vise can be mounted on either the right or left side. This set includes the following: 1 Sunrise Super AA Vise by Sunrise International 8 small spools of thread with various colors. These have had some thread used off of them 2 bobbins or thread spool holders 1 whip finisher 1 scissors 1 hackle pliers 1 hair stacker 1 tweezers 1 sharp pointed tool. Not sure what it is called. Looks ... morelike a mini ice pick 1 tube of dubbing wax 2 tags with a little chenile on each various feathers and furs pictured in the photos 1 book on fly tying 8-1/2" by 11" titled"Fly Tying Techniques" by Jacqueline Wakeford with 149 pages 1 book titled Practical Flies and Their Construction by Lacey E. Gee and Erwin D. Sias measuring 5-3/8" x 8-3/8" with 64 pages Instruction pamplet for the Sunrise Vise Instructions for using the Whip Finisher 1 book titled Making Your Own Fishing Rods by Mel Marshall 1 small package of small hooks All items are used but in good condition. The tools look nearly new. The board/table has some very light staining but still has a nice smooth surface. One wood button needs glued back in the hole where a screw is. All it does is cover the screw. The feathers. Fur, and thread all have had some use off of them. The bottle of head cement is dried up which most do after sitting for some time. Overall, this is in very good condition. The books have some wear but are still solid and very useable. The original instructions for the whip finisher, the vise and fly tying instructions have bends and folds and fairly heavy use but still very
THIS AUCTION IS FOR THE FLY TYING KIT BOX PICTURED ABOVE-BOX ONLY- IT IS IN FAIRLY GOOD SHAPE FOR IT'S AGE PICTURES SHOW WEAR MARKS THERE IS A SET OF INSTRUCTIONS IN THE BOX THAT IS INCLUDED FYI SHIPPING- ITEM IS NOT HEAVY- IT WILL BE THE EXPENSE OF PACKING MATERIALS AND POSTAGE WEIGHT& SIZE- WE DONT PROFIT FROM SHIPPING COMBINED SHIPPING IS AVAILABLE
It's a cotter pin vise. If you've got cotters. You need this, and, like beachfront property, they ain't making any more.
I have several bike tools for sale now. So please check them all out. All are from my personal shop, and have had very light use. Some are a little scratched up, but they are in excellent mechanical condition. I have priced each one at an average recent selling price, so they are each a great value. The AV-1 allows you to hold an axle in place using a bench vise. So it will not turn while work is done on the hub. Different diameter receptacles for front and rear axles Simple to use- just insert axle into proper diameter opening and tighten bench vise PLEASE READ QUESTIONS will be answered promptly. So please ask before buying or bidding. SHIPPING Please see shipping details for options. INTERNATIONAL Most items by Express or Priority for tracking and insurance. I do not ship to countries whose postal service does not provide tracking for ... morepriority mail. PICK-UP With cash within 48 hours. PAYMENT Items not paid for within 48 hours will be re-listed. RETURNS Please contact me IMMEDIATELY if you have any issues with an item. Items are accurately described. So please see all photos, read the description and know your size if it is an item of clothing. Do not purchase items just to see them. Accepting returns gets quite expensive. COMBINED SHIPPING Be sure to look at my other items. I am happy to combine shipping.
USED HMH Standard Pedestal Vise- KRF&T Manufactured Kennebec River Fly& Tackle Co. c.1994-2004( Post API Manufacturer) Current HMH Jaws fit this Vise. This vise has been cleaned up& professionally re-polished. The Chassis has also been polished on this vise. Please examine pictures carefully as they are part of the description on this refurbished vise. Ask any questions.
Exhibition Vise The HMH Exhibition Vise is back. You asked for it. We listened. The Exhibition Vise has all the same great features as the HMH Standard- infinite head angle adjustment. Ultra smooth 360º rotary action, hand polished stainless steel chassis, smooth disc drag rotary tension adjustment, quick change jaw feature and pure good looks. We've dressed the Exhibition out with a finely polished, solid brass base and our large nickel plated cam lever. We certainly don't stop there with this package. The Exhibition Vise comes complete with all three HMH jaws(Micro. Omni, and Magnum) our tube conversion tool(converts your vise into the best in-line rotary tube vise available) bobbin rest, profile plate, c-clamp and HMH tyer's tool bag. In other words, everything you need to tie any size, type and style of fly. The rest ... moreis up to you. All the features of the HMH Standard plus: Micro. Omni and Magnum Jaws, Tube Conversion Tool, Large Nickel Plated Locking Cam Lever, Solid Brass Pedestal Base, C-clamp Kit, Bobbin Rest, Profile Plate, HMH Tyer's Tool Bag, Optional Engraving on Brass Base(call) Jealous Fly Tying Friends, Lifetime Guarantee HMH Exhibition Vise: $735.00* I'm selling this 2005 HMH Exhibition vise complete with everything you see listed above. This is truly the ultimate vise for every tying scenario imaginable. From Trout to Tube flies to Tarpon. You're covered. The three interchangeable jaws cover hook sizes from 10/0 to 32 and the tube conversion makes it into a top level tube fly vise. Changing any of these out takes about twenty seconds. Just screw out one and screw in the other. All original paperwork is included, including warranty card. The brass base has begun to develop a patina and is not as gleaming bright as a brand new one. This is natural and happens over time. If you want the highly polished look you could have it polished. But I prefer the more subdued look of the patina. Everything is functionally sound with only minimal wear. I have used this vise very littl
This fly tying set includes the following: 1 Sunrise Super AA Vise by Sunrise International. And associated equipment 3 small spools of thread with various colors. various feathers and furs pictured in the photos 1 book titled FlyTying How to Get Started by Eric Leiser Instruction pamplet for the Sunrise Vise The black case included to store equipment is not of quality construction. But does an adequate job. All items are in good condition. The tools look nearly new. The feathers. Fur, and thread look to have had little use off of them, if any. Overall, this is in very good condition.
Up for auction is a gently used and well cared for Peak Rotary fly tying vise. This vise has all the upgrades and options. That when purchased separately would cost over $330.00. They are as follows: Rotary vise with pedestal- $149.95 Brass riser- $27.95"D" arm- $9.95 Midge jaws- $37.95 Saltwater jaws- $37.95 Brass screw kit- $14.95 Accessory Rod- $9.95"C" Clamp- $39.95 Materials clip- $9.95 Grand Total- $ 338.55 With this complete collection of accessories. You will be ready to tie any fly pattern you could imagine from tiny midges to saltwater monsters. The Peak vise is one of the highest rated true rotary vises on the market. Made in the USA and built like a tank. As you can see in the pictures, I have glued a magnet to the pedestal base. I use this to hold hooks, beads etc. and humbly submit that it is an improvement. ... moreWinter's not over yet, so now is the time to get a new vise and tie up some flies for spring! All questions welcomed. Happy bidding!
Fly tying table. Length: 1 ft 20 in. Width: 11 inch. Height: 4 ¾ inch. Base Thickness: ¾ inch. Quark bottom. 360 Pivot Arm Spool pegs and holders. Magnet Holder. 3 Hooks. Misc. Vice clip. Good Condition.
Thompson Pro Metal Fly Tying Vise w/ Heavy Base Fishing Flies click picture to enlarge Thank you for looking at my auction! Important note: Most of the items I sell are USED unless noted and are obtained from second hand sources and as such may show signs of age or wear. I do my very best to represent all items to the best of my knowledge. But may sometimes overlook or leave out potentially important information. If you have ANY questions about an item's condition or specifications. PLEASE ask questions before bidding! I will happily answer your questions as quickly as possible. As stated below. I do offer refunds but do not refund return shipping costs. Thank you f or your consideration; now on to the auction description! Thompson Pro metal fly tying vise with heavy metal base. I believe this is the Pro II model. Which came out in the ... moremid 1980’s. It has the word“Thompson” stamped on the closing lever tab at the end. This also has a homemade wire lead arm that was with it which isn’t original to the vise but I am including it as it is still useful. This vise is heavy and sturdy; the base is weighted and has a cork covered bottom. Condition of the vise is used. Very good. There is some very light rust showing on the knurled areas of the vise, and some small spots on the closing tab. A few faint scratches in places. It opens and closes smoothly and there are no dents or broken areas. Small spot of tape on the bottom. Buyer to pay for choice of either USPS Priority or Parcel Post shipping. Which includes free Delivery Confirmation. International buyers to pay for choices of International mailing options plus a $2.00 insurance fee; insurance ensures I can offer you lower priced shipping options that have protection for your purchase. Please be aware that International First Class shipping(if available) takes much longer to be delivered compared to Priority. Possibly up to 6 weeks for delivery depending on the country of destination. If you need to receive your parcel quickly I highly recommend Priority. Sorry. No
titles& descriptions Store Home Dyna-King Supreme Pedestal Base Fly Tying Vise- Leland Upgrade ~ Rollover to Preview ~, Item Condition: This vise is in very condition. The jaws have some glue residue. It comes exactly as shown in the photos. Owners manual and allen wrench included. Dyna-King Supreme Pedestal Base Fly Tying Vise Similar to our 1st production vise. Professional, with a multi angle adjustment adaptor head. One adjustment to the hex nut allows you to pre-set the amount of pressure necessary to move the vise body, by grasping the vise body and placing it in the angle you wish. Hook range: 8/0-22 Length. Jaw tip to end = 5-1/2” Height, Jaw tip to desk=7” Weight, with Pedestal=5.5 LB California’s Sonoma County is home to beautiful rolling hills. Picturesque vineyards, and a stunning rocky coastline. It’s also known for its fly ... moretying vises– thanks to Dyna-King! Since 1981, Dyna-King has been serving the fly tying community with vises of phenomenal quality and utility. Dyna-King vises set the pace for the industry and offer superb craftsmanship and unsurpassed holding power. As a family-owned and operated company with deep roots in the sport of fly fishing, Dyna-King has positioned itself as the leader in fly tying vises. Dyna-King offers a complete line of well-designed and finely constructed fly tying vises; put one on your fly tying desk today. California’s Sonoma County is home to beautiful rolling hills. Picturesque vineyards, and a stunning rocky coastline. It’s also known for its fly tying vises– thanks to Dyna-King! Since 1981, Dyna-King has been serving the fly tying community with vises of phenomenal quality and utility. Dyna-King vises set the pace for the industry and offer superb craftsmanship and unsurpassed holding power. As a family-owned and operated company with deep roots in the sport of fly fishing, Dyna-King has positioned itself as the leader in fly tying vises. Dyna-King offers a complete line of well-designed and finely constructed fly tying vises; put one on your fly tying d
Brass is class. The Sidewinder is the original Dyna-King full rotary vise. The vise up for auction has a low serial number(180) and comes with a set or regulars jaws. A set of midge jaws, a spare set of both jaws, a parachute tool, and a bobbin holder. Dyna-Kings are built to last, and this vise is in good condition. On Feb-05-13 at 17:39:44 PST. Seller added the following information: Brass is class. The Sidewinder is the original Dyna-King full rotary vise. The C-clamp vise up for auction has a low serial number(180) and comes with a set or regular jaws. A set of midge jaws, a spare set of both jaws, a parachute tool, and a bobbin holder. Dyna-Kings are built to last, and this vise is in good condition.
This Thompson adjustable fly tying vise with bench mount is in great working condition. The pictures you see are those of the actual item being auctioned.
Very lightly used and in excellent condition. This vise will make an excellent addition to your tool chest. It's not being used so it's got to go. My loss is your gain. Shipping via USPS- Priority Mail Flat rate. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13cb16bca1e-0xf6-
YOU ARE looking at A SARGENT& CO#93 VINTAGE BENCH SAW AND KNIFE SHARPENING VISE CLAMP TOOL. VISE IN GOOD USEABLE CONDITION. JAWS ARE 9-1/2" WIDE. VISE BODY SWIVELS FROM VERTICAL TO HORZONTAL POSITION look at pictures let me know if you need more info, If any questions or unsure of something. E mail, Thanks for looking. o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13cc29808bd-0xf4-
This is a very slightly used Regal fly tying vice with a wide variety of hooks along with 2 bobbins. Several years ago I thought I could be a fly fisherman. But it never worked out for me. I have tied less than a dozen flies on this vice. I have been feeling guilty about having it on my shelf for too long without using it. Happy bidding! Posted with
Used REGAL ENGINEERING Fly Tying Vise w/ 10 thread bobbins. Metal vise clamps to bench. Oak platform with holes for additional thread bobbins. hooks for tools.
Click to view larger image SunRise vise- Going out of Business Sale Details: This vise was a trade in. it is used and shows signs of use CONDITION: Please examine photo's carefully. You will receive it exactly how it looks in the picture· We will give you any and all details that we can about the item. if something about the item is not detailed(Scratches. Marks, Dirt, Etc. it is only because we did know about or see it and NOT because it's being hidden from you) Packaging: All items are packaged in bubble wrap or padded bubble wrap envelopes· Sometimes empty space around items is filled in with paper or foam Shipping: Orders processed within 24-48 hours of payment verification. Unless Holidays or weekends Which will be ship the next regular business day. All orders will include tracking numbers which can be tracked in your ... morewon/purchase history. We ship using Small Flat rate. Medium Flat rate, Flat rate Padded, and Sometimes large boxes shipped by weight. The USPS sets the prices on this. Shipping. Payment: 1. We accept payment via PAYPAL ONLY. 2. Payment must be made within 4 days of auction closing. Non-payment may result in a UPI(Unpaid Item) being put on your account. eBay will automatically close your account if you accumulate 4 UPI's total. 3. TOTAL AMOUNT DUE includes the final auction price plus S&H(Shipping and Handling) 4. S&H will be determined based upon the SHIP TO address. 5. Please list your special requests(color. Packages, etc. in the PAYPAL NOTES SECTION when you make payment. For the safety of both of us buyer/seller. We prefer PayPal payments only· Payments must be cleared no later than 4 days after the auctions end. IMPORTANT NOTE: We monitor our EBAY in box on a regular base and you should receive respond within 1-2 Hours at most. OTHER ACCESSORIES NOT SHOWN IN PICTURE ARE NOT INCLUDED! Please don’t leave a negative feedback without contacting us to resolve any issues with your order. WARRANTY/RETURNS: I will only do refunds if the item is not as descri
This auction is for a nice lot of fly tying tools. Included is a vise. 2 bobbins, hackle pliers, 2 whip finishers, hair stacker, 2 pairs of scissors. All are in good, ready to use condition. I will answer any questions that I can. Thanks for looking and have a great day! Check out my! Be sure to add me to your! PAYPAL IS THE ONLY FORM OF PAYMENT THAT I ACCEPT! If you need more photos of the item or if you need more information please contact me(for photos please send your email address) It is your responsibility to ask any questions that you might have BEFORE you bid. I do my best to answer questions within 48 hours. NO INTERNATIONAL SHIPPING I will always combine shipping whenever possible except when to do so may cause damage to items.
Set of Nor Vise table clamps. Original owner, ne v er used and in new condition. Thanks in Advance. Good Luck Bidding. The Norvise Clamp System allows your vise(andthread post) to be fastened securely to a table. Bench, board, or portable flytying box. The clamps are compact. Adjustable for very thinor thick working areas, and especially useful when traveling. This pricing is for qty 2 clamps(one for Norvise and onefor Thread Post)
Universal Bobbin Cradle(Rest) for fly tying vise. Fits any vise with a 3/8" stem. Griffin. Peak, Renzetti, etc. It is in excellent condition. No dents or bends. Rotates out of the way when not needed. Uses thumbscrew to tighten on vise shaft and another thumbscrew to adjust distance from vise. Combined shipping available for more than one of my items. Check out my!
Up for auction is a Folding Cross Country Ski Waxing Vise Table Stand. In nice condition. The arms that the skis rest on is adjustable and utility tray is removable. Please take a look at the large pictures to get a better idea of condition and email me if you have any questions. This item will be packaged good and if I overcharge for shipping I will refund the difference. I offer a full refund on this item for any reason as long as it is returned to me(at buyers expense) I will combine shipping on multiple items. My phone number is 231-675-2552 with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items.
PICK UP ONLY.or. SEE TSCMOVING posted below. or. Will meet your choice moving company for pick up. LOT#17JK. Here is a vintage work bench with wood vise and dovetailed drawer. It has a drysink like cut away area at back of table top. I believe this is to collect nut, bolts and screws. Measures 32" tall. Is 22" wide, 42" long. Great for any garage or work area. Would make a great island for your kitchen or vanity for a bathroom. We sell our items just as we found them, we do not clean them. SEE ALL MY PICTURES. EMAIL ME WITH ANY QUESTIONS BEFORE BIDDING. SEE ALL MY PICTURES FOR CONDITION AND COLOR AS IT IS USED. IF YOU WIN MORE THAN ONE. DON'T PAY TIL WE HAVE COMBINED YOUR ORDER. See all my pictures and email me with any questions. Cleared payment is expected within 5 days of auction end. 7% sales tax will be charged to ... moreall Indiana residents. Notice for all International buyers: NO INTERNATIONAL SHIPPING ON THIS ITEM. Contact me for details.Located in New Castle.Indiana. Located 40 miles east of Indianapolis, 20 miles south of Muncie, 25 miles west of Richmond. Call 1-765-529-2105 for an appointment to pick up or view. THIS IS PICK-UP ONLY or I WILL GLADLY WORK WITH THE SHIPPING COMPANY OF YOUR CHOICE or YOU CAN GO TO TSCMOVING.COM FOR A QUOTE. offers blanket wrap delivery inside your home at affordable prices. Enter your zip code and our item information will be pre-filled for you. Zip Code:
This auction is for the entire lot of Fly Tying supplies and instructional book by Eric Leiser. Supplies included from book content: vise.Bobbin, hackle pliers, dubbing needle, scissors, head cement,cake wax, hooks, Mallard quills with other feathers, Muscrat, Beaver and several other goodies for tying flies. I detailed everything in the pictures. Posted with
Normal 0 MicrosoftInternetExplorer4 Gerber Multi-tool. Vise Pocket Tool, Green, Used Very Nice condition Gerber Vise Pocket Tool Product Description: This pocket-sized pliers packs multiple functions into a tiny package that fits on a keychain. The Vise gives you more than a pliers capability thanks to a variety of handy tools included in the small mult-tool. The Vise pocket tool features an open length of 4 in. a closed length of 2.40 in. with black anodized aluminum handles and a variety of tools including: pliers bottle opener 1.5 in. serrated and straight edge blades file. Pliers are key-chain compatible and include a limited lifetime warranty. Features: Retractable Lanyard Strong mini-pliers Plain Blade Serrated Blade, Bottle Opener Med. Flat Driver Small Flat Driver File Special Features: Larger Nail Nicks, Lightweight. Anodized aluminum ... morehandles, Keychain compatible Includes Lifetime Limited Warranty Dimensions: Overall Length: 4.00" Closed Length: 2.40" Blade Length: 1.50" Width Open: 3.50" Width Closed: 1.00" Shipping Weight: 3.00 oz. Shipping is By USPS. International sales through eBay Global ship only. I only ship to a US address. I accept Paypal. Paypal bill me later. I always post feedback upon receipt of your feed back. If you have a problem please e-mail me before posting feedback. Thank you for bidding. Please look at my other auctions Returns: If it isn't as pictured contact me and lets work out a solution. An item returned for a refund will be minus any shipping charges. You are responsible for the return postage. Other Stuff: I only ship to a US address. International sales through eBay Global ship Payment is expected in 7 days. Non-payment disputes will be automatically filed after this time. We will ONLY ship to your eBay/ Paypal registered address. Ask questions before bidding- Please see my other listings Disclaimer for Knife Purchases By purchasing any knife from this seller: 1) the buyer assumes full responsibility to know and obey all applicable local. State,
Dyna-King Side-Winder Fly Tying Vise Excellent pre-owned condition. Has serial number 459 under octagonal barrel. Vise will come with pictured papers. Missing is the Bobbin wire and rest. And the rubber feet. The base has been re-painted. Good luck bidding.
The vise works well.PLEASE NOTE it is missing the pad that goes on the threaded shaft that clamps the vise down
Fly Tying Vise Clamp for Trout Fishing- Includes Tread. Vintage 3 1/2" clamp, Adjustable Includes thread guide, Condition: looks great- clamp moves smoothly. FAST SHIPPING! Order and pay for your purchase by noon Pacific time and normally it will go out same day. Weekends and holidays excluded. My guarantee: I do my best to be your eyes and accurately describe condition. I'm not perfect. Sometimes I miss details. It's hard to catch everything, especially on used items. If this item is not as described I will happily refund 100% of your purchase plus the return postage. Please contact me for a return authorization. As soon as the item is returned I'll refund your purchase. Powered by
Developed by George Le onard Herter in 1 952 as an alternative to fly tying vises that were of inferior quality. Used by him to devel op dozens of patterns including the black nose dace. Wrongly attributed to Art Flick. Used by Jacques Le onard Herter to ti e award winning patterns that ca ught fish. And did not simply decorate your hat. If you reco g nize this. You know the Herter's cat alog. I acquired this recently in a lot of materials. But it is not quite suitable for beginn ers in my upcoming class. So it is going on ebay. Used, it actually works. The vise is unmarked but the clamp is labeled Herter's number 9. A great bargain to add to your collection of Herters stuff. It wo rks(note y uk bug in jaws) and is in good condition. Pa ypal. International OK if you give me time to calculate shipping. I obey all ebay rules and my ... morebidder s do as well. Money refunded if you are not completely satisfied. Fly and other jiggery pokery on bench not included. You get only the vise. S orry. As always. No reserve and happy bidding!
You're bidding on a very lightly used Regal Midge sized jaws for Regal fly tying vises. What you see in the picture is it. Nothing else is included. The spring action on the jaws are nice. No chips or cracks where the hook is held. A nice addition for anyone who has a Regal Vise with a traditional head. If you have any questions. Please feel free to ask. Thanks for looking.
VINTAGE THOMPSON FLY-TYING VISE A heavy duty Pro Model. Nice condition. A little surface rust on vise tightening knob that's easily removed. From the Jack Paar Estate Sale in Greenwich. Ct
1963- 3" WILTON BULLET STYLE BENCH VISE. Mechanically solid vise. Jaws are in very good condition. The finish reflects age. This is not a refinished vise. Completely original. Can send other pics if you like. Great vise for age. This vise has many more years of use. Model 9300N. Nearly 50 years old. Posted with
THULE 589 VELO VISE FORK MOUNT( no lock cores) IN LIKE-NEW CONDITION(without the box) Everything included(except the Thule Lock Cores) so just install it on your vehicle roof-top rack and you're ready to go! This Thule 589 Velo Vise Fork Mount Bike Carrier will carry almost any type of bike. The Thule 589 Velo Vise may just be the world's fastest& easiest fork mount bike carrier for the loading& unloading of mountain&or road bikes. The Thule 589 Velo Vise will fit Thule square load bars&or Yakima round cross bars. It can also be adapted to car factory racks by using the Thule 532 Ride-On Adaptor. Self-centering skewer for quick& easy bike mounting Extra wide skewer opening for clearing fork's safety-tabs Wheel strap even accommodates high profile rims( an extra wheel strap is included- see pics) Dual-locking ... moredesign. Locks bike to carrier& carrier to rack using Thule lock cores( not included) DOES NOT ACCEPT DISC BRAKES! Very easy to install(installation instructions included) to adjust to whatever your particular situation may be(vehicle. Type of bike, etc. If you rack your bike. You can't do better that the Thule 589 Velo Vise Fork Mount Bike Carrier! This Thule 589 Velo Vise Fork Mount Bike Carrier was only used a few times& was thoroughly cleaned and well maintained after every use. It's in great shape& has absolutely NO fading from the sun as it was kept in my garage. A good deal for a clean Thule 589 Velo Vise Fork Mount Bike Carrier
You're bidding on one Used Thule 589 short tray velo vise fork mounted bike tray. In good working condition. Comes with lock and key and was kept in a garage for last two years. In great condition and perfect working order. Im missing the rear cap on the tray but it is not necessary for the tray to function. FREE SHIPPING Posted with eBay Mobile Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb%3A%60%3E-13cfe7f0e53-0xfb-
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Good ol vise
You are bidding on the original Regal rotary vise with bronze pedestal base. There's a 6.5" stem with swivel and traditional spring loaded jaws come with this. The one close-up on the body of the jaws show a chip taken out of the body. It doesn't affect the performance of this vise in anyway. The spring action on the jaws work great. No damage to the actual business end of the vise. Still has the original cork base under the bronze pedestal. I've also included the bobbin holder thats usually sold seperately. If you have any questions. Please feel free to ask. Thanks for looking.
You are bidding on an original Universal Rotary Fly Tying Vice. This vice has very little information available yet is one of the first successful rotary fly tying vices available to fly tiers The Vise is complete and in full working order. This vice date to the mid 1960's. Great gift for any collector or someone who enjoys using vintage quality tools Made in the USA. Universal Vise Corp. Westfield Mass. This is a piece of history, I have only seen one other vice(not in as good condition) come up for auction once before and I have never come across another in the many fishing museums and shops over the years. Good Luck! Measures 11" tall.
1 SMALL MARK ON SLEEVE BY THE JAWS. VERY SMALL AREA OF THE FELT IS LIFTED FROM THE BASE(STILL INTACT THOUGH) A COUPLE SMALL LIGHT COLORED MARKS ON THE BASE PART. THIS VISE IS FULLY FUNCTIONAL AND IS VERY GOOD CONDITION FOR ITS AGE!