In 
 
Order by: 
Available to: 
Price: 
 - 
$
1000.00
Buy It Now
Condition: Used
Location: Gansevoort, United States
Powermatic 87 20 inch vertical Bamdsaw 3 phase ..
$
800.00
Buy It Now
Condition: Used
Location: Manassas, United States
Powermatic Bandsaw Model# 141 Part. Many of the 141 parts will also fit a model 143. USA made I am Parting out a full saw so ALL parts are available! ... moreCheck my Store! Feel free to ask any questions!
$
2000.00
2d 22h 11m 33s
14 bids
Condition: Used
Location: Brooklyn, United States
This is a production class Dual Drum Sander that is loaded with features. A 7.5HP motor drives the dual steel drums. Which have a hard durometer rubber ... morecoating to ensure a flat, mar free finish. Independently adjustable rear drum makes fine tuning easy. A heavy cast iron table incorporates four solid jackscrews with chain drive timing to keep it level at all times. The heavy-duty poly conveyor belt provides a positive grip on the stock. The 1/4HP feed motor is coupled to a two-speed forward/reverse gearbox that will sand 8 and 12 surface feet per minute. The heavy steel cabinet provides vibration free sanding, with plenty of storage space underneath. 7.5HP motor for plenty of power, Independently adjustable rear drum for fine tuning, Hard durometer rubber coating on steel drums provides flat. Smooth finish, Two-speed gearbox for wide range of sanding projects, Full size cast iron table for solid support, Forward/reverse poly conveyor belt grips stock evenly, Dual dust ports with directional baffles for more efficient dust removal, Standard Equipment: Two speed gearbox, Dual 4" dust ports, Sandpaper installed on drums, Tool kit, Part Number, 1791320 Maximum Board Width, 37 Minimum Board Length, 9" Maximum Board Thickness, 5¼" Minimum Board Thickness, 1/32" Drum Diameter, 6" Sanding Drums(number of drums) 2 Drum Length, 37" Drum Speed, 1700 RPM, Conveyor Motor, 1/4 HP Dust Port Outside Diameter, 4" dual ports) Dust Collection Minimum CFM Required, 1200 cu.ft/min, Motor Power, 7½ HP, Motor Voltage, 230 V Motor Phase, 1 Ph, Model Number, DDS-237 Brand, Powermatic Overall Dimensions, 60 x 45 x 45 Height, 45 inch, Width, 45 inch, Length, 60 inch, Net Weight, 962 pound,
$
169.99
Buy It Now
Free Shipping
Condition: New
Location: Murfreesboro, United States
New Arbor Assembly Fits Powermatic Model 66 Tablesaw Part Number: 2024018 This is a brand new part. And a great opportunity to win huge savings! $ 7.95 ... moreUPS Shipping Only. Shipping available to lower 48 states only. No APO/AE. Notice to All Potential Bidders: Shipping costs are posted for this item. Should they not meet your expectations. Please DO NOT bid on this item. Part Number 2024018 Height 2.3 inch Width 2.5 inch Length 6.7 inch Net Weight 3 Lbs. Those paying with PayPal. Tracking numbers will be posted in your PayPal account within one(1) BUSINESS day following payment. Items listed by eqss1/ equipmentsalesandsurplus.com may be removed at any time. Provided there are no bids. Thank You. And Good Luck!
$
110.00
Buy It Now
$10.50 Shipping
Condition: Used
Location: Heber City, United States
Part is in great working condition.
$
350.00
3d 18h 46m 9s
0 bids
$475.00 Now
Condition: Used
Location: Stow, United States
6" X 48" Powermatic Belt& Disc Sander Serial Number: 9230029 Equip and Specs: Model: 30B Belt size: 6" x 48" Disc size: 12" ... moreBelt table: 7" x 17" tiling Disc table: 7" x 17" tilting Approximate size: 30" x 37" x 56" Includes 2 additional new sanding belts Elect Specs: 1-1/2 HP; 220/440/3/60 Condition: Very Good Location: 26470 Lakeland Blvd. Euclid, OH 44132 Guarantee: 30 day return privilege- freight prepaid by buyer Terms: Net with order Price: F.O.B. Location $975.00 Stock# S212127 If you have any questions regarding this machine or its tools. Please don't hesitate to email us with questions. Most emails will be responded to within 24 business hours. Include the Stock number with your email. Here at Small Tools Inc. Our highly skilled staff fully runs and tests the machines for sale to ensure you get a quality product. If you are able to. Stop in to our warehouse. We can put you in the driver's seat and have you operate all of the machine's features before you buy. We pride ourselves on being an honest American-owned company. We can also send videos upon request of the machinery in action if you aren't able to make it in to our facility. Shipping is of the responsibility of the buyer. But a free quote can be given after purchase has been made. Contact us for more information on shipping or arrangements. This machine is subject to prior sale in our brick-and-mortar building unless otherwise noted. Thank you for looking! Very Truly Yours, Small Tools Inc. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
$
4000.00
1d 2h 45m 31s
0 bids
Condition: Used
Location: Burlington, United States
Powermatic Model 29 Tilting Spindle Wood Shaper for sale by owner. Used in a commercial setting, manufacturer of high-end furniture. Serial Number 010929042, ... moreStock Number 1791244. Please contact Skram Furniture Company with any questions (336) 222 - 6622 or [email removed by eBay]. 
$
30.00
Buy It Now
$5.50 Shipping
Condition: Used
Location: Heber City, United States
Part is in great working condition.
$
26.15
Buy It Now
Free Shipping
Condition: New
Location: Belleville, United States
Powermatic no. 3312130, 6760046, and 6860800. This is the cursor with new mounting screws and washers for the US made Accu-Fence T-Square fences. This ... morewill fit the Accu-Fence on the contractor saw and the bigger industrial saws.
$
1850.00
Buy It Now
Condition: Used
Location: Terrell, United States
For sale is a used Powermatic 66 Table Saw, 5HP, 230 V, 3 phase. 10" blade.
$
32.00
6d 19h 43m 10s
0 bids
$10.90 Shipping
Condition: Used
Location: Yonkers, United States
Powermatic Table Saw Top Adjusting DogsAs per pics all good
$
110.00
Buy It Now
$13.50 Shipping
Condition: Used
Location: Heber City, United States
$
589.00
6d 9h 26m 12s
0 bids
$775.00 Now
Condition: Used
Location: Lexington, United States
Single Phase 110. Small weld repair.
$
1500.00
Buy It Now
Condition: Used
Location: Red Bank, United States
Powermatic 1150 With The factory speed reduction assembly that brings the RPM down to 200. That is why the head is longer than a regular 1150. I have ... morehad this for about 10 years and it run and looks great.
$
3750.00
Buy It Now
Condition: Used
Location: Bonita Springs, United States
This is Powematic#2749003. This is a 3/4" spindle assembly for the Powermatic 26. 27, and 27S shapers. This will fit the straight shank machines ... moreonly. There was a 2 year period when they went to a tapered spindle so check yours first. If your top was surface ground rather than Blanchard ground, you probably have tapered spindles. Shipping on this item is free via USPS or UPS. I do combine shipping wherever possible. I do ship internationally. Just email me and I will quote shipping to your country.
$
750.00
Buy It Now
Condition: Used
Location: Syracuse, United States
Powermatic Model 013 120/230 Heavy Duty Cast Iron Edge Sander. Works good!
$
19.00
Buy It Now
Free Shipping
Condition: New
Location: Belleville, United States
Powermatic Tablesaw Model 66 Sawblade Arbor Nut Wrench Cast Iron L15 Wrench in good used condition. Length is 8 3/4" Feel free to ask for more pictures ... moreand/ or ask questions Winning bidder to pay shipping/ handeling from zip code 49738- I ship world-wide! Thanks for looking!
$
3200.00
Buy It Now
Condition: Used
Location: Dekalb, United States
Powermatic 180 planer. Pallets that need to be enlarged will require a larger pallet fee. The larger and taller a machine is the more likely they will ... morerequire more than your average pallet.
$
12.50
Buy It Now
$2.00 Shipping
Condition: New – Open box
Location: South Lyme, United States
Untitled Document Free. Fast Shipping Every Business Day! Powermatic Scroll Saw Model 95 Instruction and Parts Manual for serial No. 1-101 and up Click ... morefor Our Complete Catalog Manual Description: Number of Pages: 9. This is a reproduction. Not a photocopy, of an original Powermatic Scroll Saw Model 95 Instruction and Parts Manual. For scroll saws with serial numbers from 1-101 and up. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I may have more than one manual that covers your machine. And I am adding new manuals all the time. I do not carry additional parts for machinery. Except for what is listed.
$
185.00
Buy It Now
$22.00 Shipping
Condition: Used
Location: Heber City, United States
Bearings Spin Smoothly.
$
1995.00
1d 5h 36m 12s
0 bids
$2600.00 Now
Condition: Used
Location: Louisville, United States
Like new Powermatic 6" Jointer 100th Anniversary Edition. The jointer has a 1HP motor wired 115V but can be changed to 230V. Factory installed Helical ... moreCutterhead that cuts great and has been used very little. Also included is the matching rolling base. Tabletop length is 66 inches, and the fence is 38”. This 100th Anniversary jointer was only offered for a short period of time. Weight 350lbs. Local pickup only in Louisville, KY.
$
42.00
Buy It Now
$8.75 Shipping
Condition: Used
Location: Heber City, United States
Powermatic 141 Bandsaw Drive Shaft Pulley. This is a heavy cast pulley. Bore is 3/4". Part is in great working condition.
$
3799.99
Buy It Now
$8.95 Shipping
Condition: New
Location: Ontario, United States
Powermatic PM1500 Bandsaw, 3HP 1PH 230V. Exclusive Powermatic T-Square style Accu-Fence maximizes accuracy and safety. 14 ½” of throat and 14” of resaw ... moreprovide more capacity than a traditional 14” bandsaw.
$
1700.00
Buy It Now
Condition: Used
Location: Broadview Heights, United States
POWERMATIC Model 30. 6" BELT & 12" DISC COMBINATION SANDER. Robbins & Myers 3/4HP MOTOR 1PH. WE ALSO INVENTORY A WIDE RANGE OF EDM CONSUMABLES INCLUDING ... moreBRASS WIRE, FILTERS AND WIRE GUIDES. DISC TABLE IS 16 1/2" WIDE.
$
125.00
Buy It Now
$13.50 Shipping
Condition: Used
Location: Heber City, United States
Powermatic Bandsaw Lower Pulley Drive Shaft Assembly. Bearings Spin Very Smoothly. Shaft is 6" Long. Shaft OD is 3/4" on Both ends. This is a heavy cast ... moreenclosure.
$
18.75
Buy It Now
Free Shipping
Condition: New
Location: New Port Richey, United States
$
1500.00
Buy It Now
Condition: Used
Location: Los Angeles, United States
Low & High Gear Box. 3/4HP Motor. Takes 95" Blade. From 1950s. Made In USA. All original, even peeling paint. Everything works on it. Because of the gear ... morebox & various pulleys it will cut anything: steel, brass, wood, plastic.
$
215.00
Buy It Now
$45.00 Shipping
Condition: Used
Location: Heber City, United States
Powermatic 141 Bandsaw Motor (Robbins & Myers). 1 Phase 3/4 HP. This is the original motor for this band saw and is in excellent working condition. Motor ... moreis in excellent working condition and bearings spin smoothly.
$
12.50
Buy It Now
Free Shipping
Condition: New
Location: Belleville, United States
This is the Powermatic lock knob for most 15" planers. This knob is for the table locking rods which keep your table locked when planeing. Officially ... moreit will fit the Jet and Powermatic machines, but I am sure it will fit the other 15" machines out there.
$
2250.00
Buy It Now
Condition: Used
Location: Baltimore, United States
Fixture & Dresser. Model: 100. Bed: 12″ x 24″. Knife Size: 12″ x 7/8″ x 1/8″. Extra Set of Straight Blades. Rate of Feed: 15 FPM. FOB Our Baltimore, MD ... moreWarehouse. Weight: approx.
$
3295.00
Buy It Now
Condition: Used
Location: Bonita Springs, United States
Model 81. Vertical bandsaw
$
1750.00
Buy It Now
Condition: Used
Location: Pomona, United States
Thanks For Taking The Time To Visit And Consider Our listing.It's Very Much Appreciated! Thanks For Taking The Time To Visit And Consider Our listing.It's ... moreVery Much Appreciated! Important Bidding/Buying Information Related To This Listing Each item is described to the best of our ability We Have Done Our Best To Describe It In Detail;However. This Is A Used Item And In Our Opinion A Good One;However, Opinions Can& Will Differ On Occasion And Because Of This We Ask That You Be 100% Sure You Know What Your Buying& What To Expect When It Arrives Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit& Inspect It Yourself In Person;However.Should This Not Be Possible Or Practical Please Review The Photos& Ask As Many Questions As Possible So You Know What To Expect When It Arrives! Notice; This Has Been.Inspected And Tested For It's Function Only.We Can Not& Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It's Installation,Operation& Safe Guarding. Any And/Or All Issues Or Concerns With Regards Safety Are The Buyers Sole Responsibility And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above Machine Details; 1) Pre-Owned Powermatic Model 1150 Variable Speed floor Model Drill Press. Spec's; SPINDLE TRAVEL: 6" QUILL DIAMETER: 2-3/16" COLUMN OUTSIDE DIAMETER: 3" COLUMN WALL THICKNESS: 3/16" COLUMN LENGHT FLOOR MODEL: 66" TABLE WORKING SURFACE PRODUCTION TABLE: 12" X 18" BASE WORKING SURFACE: 13" X 15-1/2" CAPACITY IN CAST IRON: 5/8" CAPACITY IN STEEL: 1/2" THROAT DEPTH: 7-1/2" APPROX. SPINDLE SPEEDS. 450-4800 RPM Condition- Runs Good;However. Original Speed Dial#s Were Worn Off& Had To Be Hand Written.Looks Fair! Thanks For Looking Davis Machinery LLC Important Safety Notice.There are no safety devices or E-stops on this machine and there are no safe guards to protect the operator.Upgrades are require
$
25.00
Buy It Now
$5.50 Shipping
Condition: Used
Location: Heber City, United States
Powermatic 141 Band Saw Table Tilt Stabilizer Bracket and Bolt.
$
33.95
Buy It Now
Free Shipping
Condition: New
Location: Melrose, United States
High quality rubber performs the best on bandsaw wheels. Replace your tires the RIGHT way - with rubber tires! Endless Band. High Quality Rubber- MADE ... moreIN USA!
$
125.00
Buy It Now
$22.00 Shipping
Condition: Used
Location: Heber City, United States
Powermatic Bandsaw Upper or Lower Wheel. Part is in great working condition.
$
3850.00
Buy It Now
Condition: Used
Location: Houston, United States
More woodshop machinery photos at this link: http:www.pleasantstmachinery.com/ and a few videos here too and short youtube clip of 12 inch Powermatic ... moreJointer here: https:www.youtube.com/watch?v=UxHpUNMhi-o Powermatic FS305 12 inch jointer. Made by SAC Italy. Parallelogram- type lever for raise/lower infeed. Works smooth. Longbed 50 inch infeed, 40 inch outfeed. Large cutting radius 4.5 inch 3knife cutterhead. Heavy european style fence, tilting 6x40 inch. Runs very well, needs some fingers at cutter head block replaced. Wired 230v 3phase. We can install disposable knife system for small extra cost. Knives are sharp with no nicks. Sold used. Tested, ready to run and cut wood. If you want a rebuild. We will replace bearings and belts, update electricals, install new knives, and adjust the bed to level within a few thousandths(most manufacturers ship new at about 10 thou. freight should be about $225-$375 to a business address. $35 fee to band to standard pallet 42 inch x 96 inch wide x 40 inch tall, approx wt. 1200 lbs, SHIPPED F.O.B. from 60115, no charge to load a flatbed or your own truck with no pallet Email us your business zip and we will get a freight quote. We do not mark it up if you pay direct to freight companay(at our discounted rate! we enjoy visitors by appointment in our 20.000 sq foot workshop 60115, please phone first(815)758- 6534 More woodshop machinery photos at this link: and a few videos here too We specialize in solid wood processing machines. Share extensive rebuild knowledge, and stock 20,000 sq. foot of used machines. You get our 40 years of experience as woodworkers and manufacturers PLUS 20 years as used equipment rebuilders and dealers, to help you choose the right woodworking equipment for your shop. We have been serving skilled craftsmen, world-class manufacturers, and serious hobbyists since 1989. We stand behind the used equipment we sell, guarantee our rebuilt woodworking machinery, and want you to be satisfied with your machine. Please Call(815)758-6534. Thanks fo
$
99.99
Buy It Now
$24.99 Shipping
Condition: Used
Location: Union Grove, United States
Model 30 disc sander. Machine Part.
$
39.99
Buy It Now
Free Shipping
Condition: New
Location: Murfreesboro, United States
The bags fit Powermatic models:PM1300, PM1300TX, PM1900 & PM1900TX. 10 piece set of dust collector bags which fit all Powermatic Model 1300 & 1900 dust ... morecollectors which use lower plastic bags. These bags are top notch quality and made of thick clear polyethylene.
$
75.00
Buy It Now
$20.00 Shipping
Condition: Used
Location: Heber City, United States
Powermatic Bandsaw Lower Wheel Cover. Part is in great working condition.
$
52.00
Buy It Now
$13.50 Shipping
Condition: Used
Location: Heber City, United States
Powermatic 141 Bandsaw Motor Mount Plate. Part is in great working condition.
$
125.00
Buy It Now
$22.00 Shipping
Condition: Used
Location: Heber City, United States
Powermatic Bandsaw Lower Wheel. Part is in great working condition.
$
95.00
Buy It Now
$29.95 Shipping
Condition: Used
Location: Heber City, United States
Powermatic Bandsaw Upper Wheel Cover.
$
17.75
Buy It Now
Free Shipping
Condition: New
Location: New Port Richey, United States
$
129.99
Buy It Now
$83.44 Shipping
Condition: Used
Location: Union Grove, United States
Powermatic 6 X 48 Belt Sander Grinder Part. AJAX (1HP).
$
75.00
Buy It Now
$10.50 Shipping
Condition: Used
Location: Heber City, United States
Part is in great working condition.
$
299.99
Buy It Now
$80.87 Shipping
Condition: Used
Location: Union Grove, United States
Powermatic 6 X 48 Belt Sander. Tilt Table Assembly (DS 112). Machinery Part.
$
19.75
Buy It Now
Free Shipping
Condition: New
Location: New Port Richey, United States
$
125.00
Buy It Now
$55.00 Shipping
Condition: Used
Location: Heber City, United States
Powermatic 1150 Drill Press Head Casting. No Cracks in Casting. Bore for Column is 3". Bore for Quill is 2-1/8".
$
2199.99
Buy It Now
Condition: Used
Location: Middlebury, United States
Dose not have blade guard. Prefer to pick it up yourself?. Will there be a dock or forklift. Need it urgently?. Call us and we will do what we can to ... moreget it to you quickly. Unless otherwise specifically agreed to in writing by.
$
1100.00
Buy It Now
Condition: Used
Location: Havertown, United States
Powermatic model 25 shaper newer quill 2HP 3 Phase 3/4" spindle No fence. Shaper is in good condition.
$
48.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Phoenix, United States
$
1200.00
Buy It Now
$600.00 Shipping
Condition: Used
Location: Lake Benton, United States
Powermatic #30A 6" Belt x 12" Disc Sander/Grinder, Motor: 1.5 Hp, 115/230v, 1ph. Works great
$
45.00
Buy It Now
$10.90 Shipping
Condition: Used
Location: Walnut Creek, United States
Powermatic Disc/belt Sander/Grinder table clamp 30113 (L or R?) (929-1). This is for a pair of clamps with Allen head bolts. Works on Model 30, model ... more33 and model 35. Maybe others.
$
800.00
Buy It Now
Condition: Used
Location: Melbourne, United States
Powermatic Industrial Grinder 2hp. Single phase 220v. Runs smooth and wheels are in great condition. 24.75 spread staggered disc looks to be 11 and 10. ... moreRecently serviced and electrical inspection. Can pallet for truck freight
$
99.99
Buy It Now
$19.99 Shipping
Condition: Used
Location: Union Grove, United States
Powermatic 6 X 48 Belt Sander. Machinery Part.
$
1480.00
Buy It Now
Condition: Used
Location: Placentia, United States
(Powermatic Shaper. Motor: 5 HP, TEFC. Weight: 500 lbs. Fence Size: 16" L x 1" W x 5" H (Each Side). 2) Demo/Floor Model: Demonstration use only, like ... morenew. There is no warranty, unless otherwise specified.
$
750.00
Buy It Now
Condition: Used
Location: Santa Maria, United States
powermatic mod. #30 Disc-Belt Sander ,Rebuilt. Condition is "Used". New leeson 1HP motor Mod.#115879,new square D motor starter,, All new bearings, new ... morebelts ,dust blower rebuilt, new hoses,new 12ga. wire&plug,,With manual
$
1080.00
Buy It Now
Condition: Used
Location: Archbold, United States
419-445-1111 SKU: DIS2220 Powermatic 15" Floor Model Drill Press. Model 1150A S/N: 7815S178. In Stock: 1 Brand: Powermatic Condition: Used Model: ... more1150A Listed By: Connie Powermatic 15" Floor Model Drill Press. Model 1150A S/N: 7815S178 Powermatic Drill Press Model# 1150A Serial# 7815S178 Specifications Spindle: steel. 10-spline, 33 Jacobs Taper with 0"1/2" Capacity chuck Spindel travel: 6" Quill Diameter: 2-3/16" Column outside Diameter: 3" Column Length" 66" Table working surface: 12" x 18" Drilling capacity(steel) 1/2" Tapping capacity(steel) 3/8" Drilling capacity(cast Iron) 5/8" Tapping Capacity(cats iron) 1/2" Throat depth: Drills to center of 15" dia. Spindle nose to: Table: 37-1/4" Base: 47-1/4" Key Chuck to: Table: 36-3/4" Base: 47-1/4" T-slots use Standard T-Bolts: 1/2" Spindel Speed 1200 rpm motor: 260-560-1050-1875-3550RPM Motor Brand: LEESON Model: C6T11FB3B Motor RPM: 1140/950 RPM Phase: 3 PH Power: 3/4 HP Voltage: 208-230/460 V-AC Plug has been removed See pictures for more information. At Dave's Industrial Surplus we strive to make every transaction as smooth as possible. This begins before items are listed. We go through every item with a fine tooth comb to make sure all items are both clean. And complete. We have over 10 years combined experience in Industrial Surplus. We know what we sell so feel assured that you are going to be dealt with in a professional manor from the beginning to the end of your transaction with us. Don't hesitate to contact us with any questions you may have. We love to hear from you. Payment must be received within 4 days of items end. If more time is required please contact us PRIOR to your purchase of any of our items. We prefer Paypal. Please contact us for other payment types accepted. We will not ship any items paid for with a echeck until the check clears our bank. This could take as many as 10 days. We ship via LTL. USPS, or UPS Ground. If you require a
$
1699.99
Buy It Now
$8.95 Shipping
Condition: New
Location: Ontario, United States
Model 1790812K. Support column is fully adjustable for horizontal, vertical or angled feeder position. Feeder body, column base and joints are cast iron ... morefor heavy duty operation. 5 Year - Woodworking Machinery.
$
6599.99
Buy It Now
$8.95 Shipping
Condition: New
Location: Ontario, United States
Powermatic OES9138 Oscillating Edge Sander, 3HP 3PH 230/460V. Heavy-duty oscillating gearbox and shaft for long maintenance-free use. Style (Type) Horizontal/Vertical ... moreOscillating Edge. Large radius end table has 6" vertical travel and 45?.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
2-PAGE 1958 "WIZARD POWERMATIC 12" OUTBOARD MOTOR AD
Click to view supersized image Click to view supersized image outperforms any"15" Here's a GREAT looking ad for all you owners. Restorers, or past lovers, of the Wizard outboards of the 1950's. This picture screams"Frame me! It was found in an outdoors magazine from 1955 and is an ORIGINAL magazine advertisement. Not a copy or reprint. It is approximately 16" X 11" This 57 year old ad is in EXCELLENT. CLEAN CONDITION and will look fantastic when properly matted and framed. Click on the image for a SUPERSIZED view! Vintage ads not only look great when displayed with your collection. They add atmosphere to any room and make terrific retro wall art. They also make great gifts to commemorate birthdays or special events in someone's life. All payments must be in U.S. funds. PayPal is acceptable. PLEASE NOTE: ... moreI DO NOT ACCEPT PERSONAL CHECKS! I combine winning auctions and ship up to 5 ads for one s/h fee. S/H for ads under 8 ½ X 11 is $2.50 to the US. Add $2.00 for s/h outside the United States. Check out my other auctions and save. As I will always combine items to save you shipping costs. Thanks for looking and good luck bidding! I never cut out the ads. you get the whole page to display as you see fit! Payment I accept the following forms of payment: PayPal
CROSSMAN CROSMAN Powermatic 500 OLD PARTS, BAR REL, B B TUBE & MORE !
Hello Antique a i r g u n collectors, You are bidding on 1 used part from the 19 6 0's-70's that fits; Crosman P owermatic 500 B B r i f l e. This CONSIST OF 5 PARTS, IT IS THE BAR RE L, THE B B TUBE. THE B B TUBE SPRING. THE ALUMINUM B B LOAD PORT SUPPORT AND THE OUTER BAR R EL CASING TO HOUSE IT ALL. RARE PARTS! SEE PICT URES. GOOD PART to fix SOME CHILDHOOD MEMORY TOY. But no guarantee on these 40 year old parts. NOTE; some finish loss but at this age it is expected.SOME PIT RUST-SEE PICTURES, NO cra cks or chips. Part is as is. SERIAL NUMBER on this was 00358877 so it was before Crosman started the date code serial number in 1975. That makes this B B g u n in the age of 1969-1974 Part is no longer made by Crosman. Model 500 Powermatic CO2. One powerlet, B B, se m i- auto re peat er 1969-1977 Ebay this cannot shoot any projectiles. ... moreAny more questions? Please ask. To all Ebayers; If you have any questions about the item. Need more pictures? need me to check something? PLEASE contact me! before you bid or purchase the item! I don’t like getting negative or neutral feedbacks because no one asked questions on these items. It is your responsibility to evaluate this part with questions before bidding. Thank you. Shipping USA ONLY. All 50 states.As is, no returns, I accept mail in payments also. Payment must be received within 1 day of end of auction or item may be resold– nonpaying bidder will be reported to eBay. Thanks Benjamin. Air, Sheridan, Crosman, Crossman, airgun, rifle, pelletgun, pistol, pellet, Co2, bbgun, bb gun, air rifle, ben, gun parts, parts, magazine, daisy, airgun, pelletgun, bbgun, pellet, sheridan, bb, rifle, scope, gun, daisy, airrifle, pelletrifle, air, shot, BBs, old, pump, vintage,
Vintage 1955 WESTERN AUTO WIZARD Powermatic 12, Super Ten, Fishin' 5 Outboards
Vintage 1955 WESTERN AUTO WIZARD Powermatic 12. Super Ten, Fishin' 5 Outboard Motor Original Color Advertisement Great ad for framing for the collector.full page. This original advertisement is from the February 1955 issue of OUTDOOR LIFE magazine.
1954 WIZARD "POWERMATIC 12" 12 HP OUTBOARD MOTOR AD
Click to view supersized image"Closest thing to flying. on water! Here's a GREAT looking ad for all you owners. Restorers, or past lovers, of the Western Auto Wizard outboards of the 1950's. This picture screams"Frame me! It was found in an outdoors magazine from 1954 and is an ORIGINAL magazine advertisement. Not a copy or reprint. It is approximately 8" X 11" This 59 year old ad is in EXCELLENT. CLEAN CONDITION and will look fantastic when properly matted and framed. Click on the image for a SUPERSIZED view! Vintage ads not only look great when displayed with your collection. They add atmosphere to any room and make terrific retro wall art. They also make great gifts to commemorate birthdays or special events in someone's life. All payments must be in U.S. funds. PayPal is acceptable. PLEASE NOTE: I DO NOT ... moreACCEPT PERSONAL CHECKS! I combine winning auctions and ship up to 5 ads for one s/h fee. S/H for ads under 8 ½ X 11 is $2.50 to the US. Add $2.00 for s/h outside the United States. Check out my other auctions and save. As I will always combine items to save you shipping costs. Thanks for looking and good luck bidding! I never cut out the ads. you get the whole page to display as you see fit! Payment I accept the following forms of payment: PayPal
SCHWINN POWERMATIC BMX BICYCLE 20" MAGS FREESTYLE
THIS IS A USED IN GREAT SHAPE SCHWINN PREDATOR BMX FREESTYLE BICYCLE WITH FOOT PEGS AND MAG RIMS. A GREAT BIKE AT A GREAT DEAL.Domestic shipping only CHECK OUT OUR STORE FOR MANY MORE DEALS ON BMX PARTS AND BIKES AS WE ARE GROWING DAILY! We like to see the customer pleased and strive for five star excellence so if there would happen to be any problems please email us before posting feedback and we will do our best to keep you satisfied! WE ARE ALWAYS TRYING TO LEARN AND GROW AND GET BETTER SO WE ASK YOU TO PLEASE NOT ONLY LEAVE US POSITIVE FEEDBACK BUT RATE US WELL IN ALL OF THE CATAGORIES ALSO. AND IF FOR SOME REASON WE MAKE A MISTAKE OR SOMETHING HAPPENS TO WHERE YOU FEEL YOU CAN NOT RATE US AT 100% PLEASE GIVE US A CHANCE TO RESOLVE THE MATTER BEFORE YOU RATE US AND GIVE US THE OPPORTUNITY TO TRY AND STILL EARN YOUR 100% RATING AS THIS ... moreIS HOW WE ARE JUDGED AND WE ARE A SMALL NEW HOME BASED BUSINESS THAT IS TRYING TO GROW DAILY. THANK YOU IN ADVANCE AND WE HOPE TO BUSINESS WITH YOU SOON. Dave and Becky NICHOLS WE-SALE STORE
1999 SCHWINN POWERMATIC MAG BMX BIKE CRO-MOLY X-S MAG WHEELS/RIMS RED GYRO COOL!
1999 SCHWINN POWERMATIC MAG BMX BIKE CRO-MOLY X-S MAG WHEELS/RIMS RED GYRO COOL! Click Photos to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description Here is a super cool older SCHWINN POWERMATIC"MAG" FREESTYLE 20" BMX bike. BMX bikes are super cool! I was told this is approx a 1999 model. The serial number is ACF8D 2751 F-P. I believe this bike to be bascially all original parts from when it was new! see pics and be your ... moreown judge) The bike features; a cool lightweight 4130 CRO-MOLY original paint and decals frame. Cro-Moly forks, Tektro brakes, Gyro headset, X-S neck, cool X-S MAG wheels, X-S seat and seat post clamp, and more! I was told these bikes were lower in production and have a small"cult following" of people that really like and enjoy them! This is a super cool bike you can ride and have fun with. BMX bikes are getting more popular! They make a good investment that will only go UP in value. Most were abused and throw away back in the day and are getting much harder to find now! They will only be worth more money in the future! You will LOVE this bike! I believe this to be a fairly nice original unmolested bicycle unless otherwise noted. Comes as you see it with parts shown. The distance from the center of the head tube to the center of the seat post tube is approx 20 1/2" NOTED FLAWS It is not 100% flawless but is ok. The paint looks ok for a 10+ year old bike! has chips and scratches but is not bad for its age) The chrome is shiney but is not perfect show quality. The hand grips ends are open. If you click on any of the pics they get very large to show lots of detail. Pl
Powermatic 2 electric cigarette injector roller
Powermatic 2 cigarette injector roller.Makes cigarettes in second,regulars and 100's,this machine is in excellent condition,comes with tray,ac cord and brush
CROSSMAN CROSMAN Powermatic 500 FRONT SIGHT !
Hello Antique air gun collectors, You are bidding on 1 used part from the 19 6 0's-70's that fits; Crosman P owermatic 500 B B r ifle. This is the FRONT SIGHT. RARE PART! SEE PICT URES. NOTE; SEE A LOT OF PICTURES. NOTE; some finish loss but at this age it is expected. NO cra cks or chips. SOME SCRATCHES on this plastic part. Part is as is. SERIAL NUMBER on this r ifle was 00358877 so it was before Crosman started the date code serial number in 1975. That makes this B B gun in the age of 1969-1974 Part is no longer made by Crosman. Normal 0 false false false MicrosoftInternetExplorer4 Model 500 Powermatic CO2. One powerlet, B B, semi-auto repeater R ifle 1969-1977 Ebay this cannot shoot any projectiles. Any more questions? Please ask. To all Ebayers; If you have any questions about the item. Need more pictures? need me to check something? ... morePLEASE contact me! before you bid or purchase the item! I don’t like getting negative or neutral feedbacks because no one asked questions on these items. It is your responsibility to evaluate this part with questions before bidding. Thank you. Shipping USA ONLY. All 50 states.As is, no returns, I accept mail in payments also. Payment must be received within 1 day of end of auction or item may be resold– nonpaying bidder will be reported to eBay. Thanks Benjamin. Air, Sheridan, Crosman, Crossman, airgun, rifle, pelletgun, pistol, pellet, Co2, bbgun, bb gun, air rifle, ben, gun parts, parts, magazine, daisy, airgun, pelletgun, bbgun, pellet, sheridan, bb, rifle, scope, gun, daisy, airrifle, pelletrifle, air, shot, BBs, old, pump, vintage,
2 POWERMATIC 90 WOOD LATHE 6" & 3 1/4" FACEPLATE 1-1/2" x 8 TPI ~VGC LQQK~
2 Powermatic Model 90 Wood Lathe Face Plates. 6" 3 1/4" Estate sale find in Great condition. Both have 90% of their original paint. Both are Inboard/right hand thread with 1-1/2" x 8 TPI mount. The 6" has a indentation/straight line on face side. Don't know how or why it's there. Rest assured it's not a crack. Will make a nice addition to your wood turning tool collection. Be sure to view all pictures and please feel free to ask any and all questions BEFORE bidding. Thank you for looking. All Sales Are Final.
Mattison Straight Line Rip Saw Woodworking In line diehl powermatic
Mattison Straight line Rip Saw This unit was in service until the local shop closed. Delivery available to certain locations please ask. ~~ Model 202 ~~ 15 HP 3 phase~~ 1 1/2" diameter arbor. 4" maximum depth of cut, overhead arbor design 12" minimum stock length. 24" maximum rip cap to the right of the blade 77" x 65" table size Please read auction terms: This equipment is surplus and has not been tested. It's being sold as is. Items not paid for within 4 business days will be relisted* Please inquire about our PayPal policy BEFORE paying using these methods* Our preferred payment method is wire transfer or company check PLEASE allow a week for corporate processing of payment AND 4 to 5 days processing after payment is received Invoices will be provided Subject to prior sale Shipping prep and charges are ... moreresponsibility of the purchaser All freight shipments require a complete address. A contact name, a contact phone number and a contact email. Freight shipments also require your indication of'Business with a dock' Business without a dock' and whether there is a forklift/ pallet jack available or if you require'Residential' delivery. Freight quote is based on the information that you supply to us. Michigan residents add 6% sales tax without a resale certificate As is. Where is FOB Midland. MI Mid-Michigan Industrial Surplus. LLC For existing feedback on EBay see our established electrical company Potential Electrical Supply. Both companies are located on the North side of Midland Michigan at 3045 and 3063 E. Mercantile Drive easy access on and off of US-10 Eastman road exit. Mid-Michigan Industrial Surplus. LLC statement regarding the equipment we sell: Information regarding the history and condition of the equipment we offer has been included exactly as it has been received in the description of the property. Normally. The property has not been operated or tested by Mid-Michigan Industrial Surplus, LLC to determine its fitness for a purpose. The Property is s
Powermatic Model 64 10" Artisan's Table Saw 115/230V 3400RPM 180A 1Ph Used
Description, Used Model/Part No: 64. Our Item ID: 12588 Specific Details, 1) Powermatic Mod 64 10" Artisan's Table Saw 115/230V 3400RPM 180A 1Ph Used Our Description, Powermatic Model 64 10" Artisan's Table Saw. 115/230 Volts, 3400 RPM, 180A, 1 Phase, 1-1/2Hp 60Hz, Used. Exclusions T6. Condition Item Tested? Tested Physical Condition: Good; Working Condition: Fully Functional 0||1. | | | | Contact, Mailing Address: Electrical Equipment Sales. Inc. PO Box 10926 Glendale. AZ 85318 USA Phone: Email: View ElectricalSurplus.net Other eBay Auctions. Payment, We accept the following forms of payment: Credit/Debit Cards: Accepted for US and international orders. ElectricalSurplus accepts Visa. MasterCard, and American Express directly. Shipping to the cc billing address may be required. Checks& Cashiers Checks: Accepted for ... moredomestic and Canadian orders in US Dollars only. Please allow 5-10 days in some instances. We generally ship when check clears. Unless pre-authorized. Check must include the eBay item number! PayPal: Accepted for US and international orders. Shipping to the verified PayPal address may be required. Wire Transfers: Accepted for all orders and are the preferred payment method for larger international orders. Please add $20 bank fee for all wire transfers under $1k. Contact us for our bank information and details. Payment must include the eBay item number! Credit Terms: Available to pre-authorized buyers at our discretion. Sales Tax: Arizona(AZ) sales tax collected at 9.5% Shipping, Use the shipping quote calculator. Or contact our shipping department We use mostly FedEx and some USPS. Most items are shipping within 3 days. Except if creating or palletizing. Buyer pays all shipping costs unless agreed to in writing prior to bidding. We are not responsible for upload errors in e-Bays listing software. If an item appears to be damaged due to shipping. PLEASE SAVE ALL PACKAGING MATERIAL and contact customer service immediately. Domestic We use FedEx with most packages. Or USPS for some
Powermatic Hollow Chisel Mortiser Model 719A
Chisel and bit capacity of 1/4- to 1-inch, Adjustable stops for setting depth of cut, Swing away plate allows access to chuck, Adjustable operating handle, Serious craftspeople looking for a dedicated shop machine should consider the Powermatic hollow chisel mortiser. This tool features heavy-duty cast-iron construction. And its 1-horsepower motor turns 1,725 rpm, supplying plenty of power-we made 1/2-inch cuts in a few choice hardwoods with no problem at all. The sliding table rides smooth and sure with depth and length stops and front-mounted hand wheels for linear and cross adjustments. Rack-and-pinion gearing raises and lowers the entire motor head and feeds the mortiser solidly into work. We like the removable, see-through plates for easy access to the chuck and find the lock knob for securing the chisel convenient. Tim Block Posted ... morewith
POWERMATIC 141 BANDSAW WOOD WORKING MACHINE 14" 1HP 3PH
BT# 10518 TJ You are looking for: POWERMATIC 141 BANDSAW WOOD WORKING MACHINE 14" 1HP 3PH USED ITEM. IN GOOD WORKING CONDITIONS! 30 DAYS WARRANTY! Manufactured by: POWERMATIC. Additional info: BANDSAW WOODCUTTING WORKING MACHINE Model: 141 Series 67-3425 Voltage: 208/220/440V Amperes: 3.4-3.4/1.7 1 HP Phase 3 RPM: 1725/1425 Click over the picture below to access the photo gallery: PLEASE LOOK CAREFULLY AT THE PICTURES TO SEE THE DETAILS Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 2 business days We ship with: Powered by
PowerMatic Drill Press Model 1200.
Used Powermatic drill press. Model 1200. Serial number 5-5968. Came straight from fab shop.It was working when i purchased. But it hasn't been tested since. HP 1. Volts 220/440. 3 phase. Item is used and being sold as is. Thanks for looking. Posted with Posted with 37,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28d03%3C%3E37-13e03ea4290-0x101-
POWERMATIC 16" HEAVY DUTY DRILL PRESS 2HP 200-230V DRILLING MOTOR 1740RPM 6560
BT# 11881 B06A2-075.3Y You are looking for: POWERMATIC 16" HEAVY DUTY DRILL PRESS 2HP 200-230V DRILLING MOTOR 1740RPM 6560 USED ITEM. FULLY TESTED! IN GOOD CONDITIONS. 15 DAYS WARRANTY! Manufactured by: POWERMATIC. Additional info: DRILL PRESS 16 INCH. Model: 6560 Power: 2 HP Voltage: 200-230/460 V PH: 1 Hz: 60 RPM: 1740 Click over the picture below to access the photo gallery: PLEASE LOOK CAREFULLY AT THE PICTURES TO SEE THE DETAILS Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 2 business days We ship with: Powered by
Powermatic 1150 / 1150A Drill Press Part Column Table Base
Powermatic 1150/ 1150A Drill Press Part Column Table Base Search KKingston 2G b 667MH Up for bid is an 1150 Powermatic drill press column base. I f you need more pictures or have any questions. Please ask before bidding. Please read my full description and terms of sale before placing a bid. Payment must be made within 5 business days of auction close. Paypal accepted as well. Shipment to a confirmed Paypal address only. Local pick up is always FREE! International Bidders: All international shipments will be shipped by FED EX only. I try my best to describe all items I sell to the best of my ability. However. Sometimes something may be missed or overlooked in my description. That's why I offer a 100% return policy. So if you get your widget and it's not the widget you thought you were buying. Please let me know about it so I have ... morea chance to fix said widget before pushing the red button. I do not misrepresent items j ust to sell them. Any problems you may have with your purchase can be worked out. If you shopping experience was anything less than 5 stars. Please contact me immediately. I appreciate the opportunity to correct any issues you have before you leave feedback. Barn Find Treasures brings you all kinds of great items from off the beaten trail. Estate sales. Auctions and the like. So check back with us often because you never know what I will find next. Please ask me if you are looking for something specific. If I have it. I will post it with a buy it now for you. The best way to conact me is through Ebay mail. I try my best to answer all inquiries the same business day.
POWERMATIC model 73 Dust collector
Powermatic shop vacuum. Great condition, works well. A steal for anybody
Powermatic Disc Sander Grinder Pedestal Stand with Chute
Powermatic Disc Grinder Pedestal Stand with Chute. May work with Delt a Rock we ll. Jet, Burr King, Wilton or others, made for 12" Powermatic model 35 Di sc Sander Grinder. Dimensions are 15" x 16" x 33" a nd mounting holes are 8" on c enter. It's hard to tell from the pics but the main column is tapered from roughly 7.5" wide at bas e to 5.5" wide at top. If you have any questions. Be sure to ask. Weighs about 45lbs with no packaging.
POWERMATIC Heavy Duty Ball Bearing Grinder 1 H.P. 220 Volts 3 Phase EUC
POWERMATIC Heavy Duty 1 HP Ball Bearing Grinder. Features include: 220 Volts* 3 Phase* 3.2 AMPS* 1750 RPM* Frame 204* Type P.N.G* Serial# 322944* Grinding Wheel Size 10" diameter x 1" width x 7/8" bore All Original Condition. Was working as it should when recently taken out of service. Excellent used Condition. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60%3F3%3Aa%3E-13e0423ef4b-0xfa-
POWERMATIC PLANER KNIFE GRINDER FR-48 TVA48S34T286D P WOODWORKING SHARPENING
Powermatic planer knife grinder. GRINDERTVA48S34T286D P Marathon electronics PH1 FR-48 HP.33 RPM 3450. Fits 160-225 models. Works great shows its share of scratches but works great and that is what really matters. Please check out my other auctions.
Powermatic 26 shaper w/ mobile base mint condition! Never used...then restored.
Barely ever even used. Then restored by a retired machinist. Most likely came from Boeing's wood shop where he worked, why they would need a shaper I have no idea. Has brand new Marathon 3hp motor in it!3phase) I might have a 3hp single phase for it. Bearings are smooth. Comes w 3/4 and 1/2" spindles. Custom heavy duty welded mobile base. Has 2 extension wings for extra work space. And comes with reversing switch. Also note that all the throat plates are there, as well as all the fence hold downs-the stuff thats always missing on a shaper.which tells you that this thing has been babied. I have a set of wrenches that came with it too. Trying to figure out if they are for the shaper. Will have video of it running soon. Be sure to check my other listings for similarly restored PM stuff. Local pickup or I drop off at Phila area freight ... moreterminal with it bolted to a skid and shrink wrapped. Crating is extra. Posted with
POWERMATIC 5 HP MODEL 66 TABLE SAW WITH BENCH AND FENCE.
Please read before bidding: IF PAYING WITH PAYPAL. I WILL ONLY SHIP TO THE ADDRESS THEY PROVIDE. IT'S THEIR RULES, NOT MINE! PAY BY A DIFFERENT MEANS AND I CAN SHIP ANYWHERE YOU WANT! TO AVOID SHIPPING DELAYS. PLEASE PROVIDE NAME OF BUSINESS AND PHONE NUMBER WITH PAYMENT. THANK YOU. I accept all forms of payment and can accept credit cards through paypal. Please have patience with questions and shipping quotes. Shipping to a business is at least $30.00 cheaper than shipping to a residence. The freight company does not consider schools. Hotel or church's to be a business and charge the same as a residence. They charge an additional $30.00 if a lift gate delivery is needed. They charge a minimum of $40.00 for insurance. This was just removed from bankrupt shop. I finally have a warehouse that has 3 phase so I was able to wire this up ... moreand it works good. 230 volts. 3 phase, S/N 88664207. This is 5 HP, feel the power! The bench is 74" long. If you have immediate questions(602) 908-3006. Check my 100% positive feedback and bid with confidence. LOCAL PICK UP IS FREE! I HAVE A FORKLIFT. Buyer pays actual shipping and $45.00 for palletizing. I get a 81% discount with my frieght company. Payment required within 3 days of auction close. A check may require a 10 day hold. What you see is what you get. There isn't any hidden accessories.
Powermatic PM1900 Air Filter Dust Collector Canister - Nice used - Single Phase
Gently Used Dust Collector MODEL: PM 1900-1 Single Phase The PM1900 Dust Collector is strong enough to use with planers. Wide belt sanders, table saws and most other woodworking machines. The canister filter offers superior filtering surface area over standard bags, and captures 98% of 2-micron particles. The all-metal duct improves rigidity and air flow. The clear collector bags are large capacity, which means less down-time changing them. Four swivel casters and conveniently located handles allow for easy mobility. There is a triple cone option that can be purchased to allow 3- 4" hoses to be attached. These machines are less than 2 years old and are in very nice condition. I have 6 machines available. Will be shipped assembled and ready to use. SPECIFICATIONS: Part Number: 1792074K Remote Control: No Sound Rating: 86- 92 dB 1-Hose ... moreConnection Diameter: 8" 2-Hoses Connection Diameter: 4" 3-Hoses Connection Diameter: 4" Bag Diameter: 20" Filter Bag/Canister Length: 26" Collection Bag Capacity: 10 cubic foot Collection Bag Length: 30" Air Flow@ 4" 236 cu.ft/min Air Flow@ 8" 1.782 cu.ft/min Static Pressure: 11.31 inch of water Particle Size(Micron) 86% of 1 micron particles; 98% of 2 micron particles Velocity@ 4" 5.200 foot per minute Air Inlet: 1) at 8" or(3) at 4" Impeller Diameter: 14" Impeller Fins: 7 Impeller Material: steel Separator Tank Diameter: 20" Separator Tank Height: 10" Motor Power: 3 HP Motor Phase: 1 Ph Motor Voltage: 220/ 240 V Prewired Voltage: 220 V Motor Current: 8.2/ 4.1 A Overall Dimensions: 61 x 30 x 72(assembled) Height: 45 inch Width: 23 inch Length: 46 inch Net Weight: 264 pounds Please ask any questions before buying. I can send actual pictures and will post them shortly. Optional 3 hose connection not included. Thanks. Jon 479-903-3506
Nice! POWERMATIC 20" VERTICAL BANDSAW
Up for auction: POWERMATIC 20" VERTICAL BAND SAW Model 87 S/N-67-8409 Variable Speed 37- 4500 FPM Variable. Low, High 24" x 24" Tilting Table 150" Blade Length Max. 11" Max Workpiece Height 220/440 Volt. 3 Phase(Wired Now 220 Volt) Worklight This is a Really Nice Powermatic Saw. We have used this saw in our shop and it is a powerful saw. Comes as shown in the pictures. Bid with Confidence on this item. Check my feedback. The machine ships from Carrollton, Texas 75006(Suburb of Dallas) If you have any questions email me please. Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items.
Price Reduced DoAll 12" Disc Sander Grinder Polisher Belt Powermatic
This is a nice DoAll 12" Disc Sander. Runs great. Wired for 230 volt/ 3 phase electric. Buyer pays all shipping. $50 fee to skid/crate for carrier shipment. Ohio Sales Tax Rules Apply. Payment must be received within 5 days of close of sale. Sold AS IS
Powermatic 8" Jointer Door 20-1/4" x 12-1/4"
This listing is for a door that belongs to a Powermatic 8" jointer. The door is painted green but is covered in rust in some spots. The door measures 20-1/4" x 12-1/4" This listing is for a Remington powder actuated nail gun. Model 496. Includes 150 yellow and 60 green.027 caliber powder charges, a box of fasteners, eyeglasses, a hex key, a bristle cleaning brush and instructions. This gun is very gently used and is in great shape with only some minor dust and dirt marks. Our business. Psmsolutions2, is a sister company of psmsolutions and pleasantstmachinery. Both accounts have been in use for years with excellent seller ratings. Please refer to those accounts for a more accurate representation of our dedicated commitment to customer satisfaction. We welcome any questions that you may have prior to bidding. Feel free to send ... moreus a message or contact Steve Nelson via phone at 815-758-6534 during normal business hours. We will respond to your phone calls as soon as possible. PLEASE READ THE FOLLOWING VERY CAREFULLY: Fees: An 8.5% State of Illinois sales tax is charged for all winning bidders that are Illinois residents except for those that have a state tax ID. A $35.00 palletizing fee is required for each pallet used on LTL truck shipments The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction. If 30 days have passed since the item was paid for. The item will be considered abandoned and the winning bidder is deemed to have forfeited all monies paid to the seller. The item will then be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will
Powermatic 6" Jointer No. 50, 230/115 Volts, Single Phase Tested And Working
Powermatic 6" Jointer No. 50. 230/115 Volts, Single Phase Tested And Working Powermatic Model 50 6" Jointer Up for your buying consideration is a Powermatic 6" jointer model 50. This jointer came from the estate of Terry Hanson a well known wood worker who has had some of his work in the Smithsonian museum. The jointer is in good used condition and show some signs of usage. This jointer features a single phase Delco motor. I will provide plenty of pictures for your buying confidence. Cosmetically. This unit doesn't have any major damage. It has only minor scuffs, dings and scratches you would expect of normal shop use. PLEASE TAKE A LOOK AT ALL PICTURES FOR DETAILED FEATURES ON THIS PIECE! ~~~~~ IMPORTANT- PLEASE READ THE FOLLOWING After purchasing. Please DO NOT pay for the item until the shipping fee has been applied ... moreto your invoice. An e-mail will be sent to you with shipping quotes. Shipping rates can vary greatly based on distance. So that we can provide you with the most accurate and lowest shipping quote possible. Please call or write us with the following: A valid phone number(once item has been purchased) Your shipping address If your address is a residential or business address If you need lift-gate service on the truck or not If you have a freight account and would like to use your own carrier Questions? Call Mattson Co. 619-621-5485. We're happy to combine shipping where possible. We can accept traditional offline methods of payment. Pick-up is available from our warehouse in Chula Vista. CA. We also offer local delivery service. DUE TO SIZE RESTRICTIONS. WE ARE UNABLE TO OFFER INTERNATIONAL SHIPPING All items sold“As Is” Where-Is” with no warranty implied. jpm-4/4/13warehouse Paypal is the only form of payment we accept. Winner is excepted to pay within 7 days or I will relist the item. Sometimes exceptions can be made but please contact me first. Buyers in California will be charged 8.00% sales tax. All ship from our warehouse in San Diego. California. Local pick-up is always
Powermatic 100 12" Planer
Vintage Powermatic PM100 12" Planer Up for auction is a vintage Powermatic PM-100 12" plainer. Serial number 1-4450. This particular model was in working condition when removed from a local high school. It dates back to the early 1960's. Motor is 3 Phase/ 3HP/ 220V. The planer was hardwired, so there is no plug. Dimensions 30" W x 24" D x 40" H. Included is a very nice shop made dust collector hood, as well as the cast iron chip chute. There are no breaks or cracks that I can see. Inspections welcome. I'm listing this one final time. The reserve is $450. Incidentally, the sister to this planer sold on another site for $900. Good luck There is no shipping on this item. Local pickup only. Please Note I do not claim to be an expert on any of the items I sell. Please look at the pictures as they are part of the ... moredescription also. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
Powermatic Woodworking Machinery Catalog From 2006/2007
This catalog is in very good condition.
POWERMATIC TABLE SAW 30.5"X10" WING EXTENTION CAST IRON
Powermatic Table Saw cast iron extension wing Measures 30-1/2" X 10" X 1-1/2" thick Not sure what model saw it is made to fit. I had it on my model 66 It is in very good usable condition. No cracks. Deep scratches, dents, deep rust or repairs Shipping to the USA ONLY
Powermatic Model 26 Spindle Shaper with 5 HP Motor and 4-Roll Delta Power Feed
Machine For Sale Powermatic Model 26 Spindle Shaper with 5 HP Motor and 4-Roll Delta Power Feed Stock# 54017 Condition: Used Tested: Tested Brand: Powermatic Model: 26 Serial: 8626165 Year: N/A Weight: N/A Shipping Dimensions: N/A Additional Details: Powermatic Model 26 Spindle Shaper with 1” dia. X 4 ½” long threaded spindle. 5HP, 208/230/460 volt, 3PH motor, 2-speed pulley, magnetic starter, reversing switch, adj. fence, guard and 4” dia. dust chute. Also incl. 4-roll Delta Universal Power Feed with stand and fladder. 25-KW, 4” dia. X 6” dia. spindle sander. 28” x 30” cast table, machine wired for 230/60/3. Cord and plug SN: 8626165 If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. alt=" border="5" ... morealt=" border="5" alt=" border="5" alt=" border="5" alt=" border="5" alt=" border="5" alt=" border="5" Please Read Before Buying Item* Preliminary specifications are subject to verification and should be used as a guide only. The Equipment Hub. LLC cannot guarantee the accuracy of the specifications and/or description given of the condition of machine Terms Of Sale Seller is selling the assets set forth on an as is. Where is basis and seller disclaims all warranties, representations and guarantees whether expressed or implied. Seller makes no representation or warranty as to the operability, merchantability or fitness for any particular purpose. The buyer is always responsible for verifying the condition and operational functions. Upon reasonable notice to The Equipment Hub the purchaser shall have the right to inspect the equipment prior to purchase. Payment Information All Payments are to be made in United States dollars. We accept Visa. Master Card, Discover, Paypal, Bank Wire Transfers and Checks. Payment in full must be received prior to shipping. If payment is not received within 7 days
Powermatic Tilting Arbor Saw Model 65 (Inv. 14808)
Powermatic Tilting Arbor Saw Model 65: SN 3-2246 8-1/2 inch blade diameter Weight 750 lbs. Table Size 28" X 30" with 2 extensions. Overall Size 28" X 72" with extensions. 33" Fence Push button control/Emergency mushroom stop. 3 phase W 2-Protractor Slides Equipped with Brnt Adjustable Blade Guard. Assorted Blades as shown. Catalog Description: Precision Miter Gauge-with stop rods to guarantee true accuracy on even largest stock. Easily adjustable in table T-slots. Maximum Safety-saw guard and splitter have anti-kickback pawls. Guard swings away easily for blade change. Super Smooth Operation- heavy-duty. Sealed-for-life ball bearings throughout. Ruggedly Built- heavy gauge reinforced steel cabinet on cast iron base. Basic parts steel or cast iron-none die cast. T-slots- An excellent safety and accuracy featurem the ... moreT-slots prevent miter gauge from falling when making wide cut-off. Fence Adjustment Fast and Sure from either side with vernier control knob and top-reading front guide bar calibrations. Upper knob locks rear of fence, Fence is precision machined of cast iron with tubular steel guide bars. Arbor- the 5/8" arbor is mounted in large sealed ball bearings requiring no lubricaiton and is driven by three A-section belts for maximum power. It is raised and lowered with a worm-gear operated by conventionally positioned hand-wheel and may be locked at any desired height. Arbor tilts away from rip fence for safer operation. Inv.14808) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quote
Powermatic Model 66 Table Saw, 5HP, 220V, 3 Ph, Cleaned/Checked, Mfg Year 2000
Powermatic 66 Table Saw, To be cleaned& checked, 10" tilt blade, 5 HP, 220V, 3 Phase Mfg. Year: 2000, Stock Number: O-1-076 Framing or crating will incur additional charges. If needed Please Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if item is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time end as it is listed on our website and in other ... moreadvertising. PAYMENT TERMS: Full Payment or deposit required within 24 hours of order. NO EXCEPTIONS. Items not paid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost.
Powermatic 66, Baldor 5 HP 3 Phase Motor
This sale is for a Powermatic 66 5 HP. 3 Phase, 230/460, Motor in exceptional condition. I removed it from my personal saw when it went to my new residence with no available 3 Phase power. The pulley is not included. I have owned this saw for a long time and its seen exceptional care. No commercial use, and low hours. You can pick it up. Or I will build wood crate, and put in box, and take to UPS for free at the asking price. Any any all shipping fees will be paid by buyer. Check my feedback! Questions. Call Steve(260) 750-9681 Posted with
POWERMATIC 1150 THREE-HEAD 15" STEP PULLEY DRILL PRESS
POWERMATIC THREE-HEAD 15" STEP PULLEY DRILL PRESS- USED POWERMATIC THREE-HEAD 15" STEP PULLEY DRILL PRESS INVENTORY# 3512 MODEL 1150 SPECIFICATIONS: DRILL TO THE CENTER OF CIRCLE: 15" CAPACITY: 5/8” C.I. ½” M.S SPINDLE TAPER: 2 MORSE TAPER(10 SPLINE) SPINDLE SPEEDS(STEP PULLEY) 5 SPEEDS: 475- 4.800 RPM QUILL TRAVEL: 6” QUILL DIAMETER: 2 3/16” COLUMN DIAMETER: 3” PRODUCTION TABLE: 70” R-L x 25” F-B WITH COOLANT TROUGH(2) LEGS MOTORS: 3/4 HP 3 PH.1725 RPM EQUIPMENT INCLUDED: 3) DRILL CHUCKS(3) RACK& PINION TABLE ADJUSTMENTS ON/OFF SWITCH DIMENSIONS: 8 1/2” R-L x 12” F-B x 62” HIGH CLEANED. CHECKED AND IN GOOD CONDITION CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business ... morehours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 years. You can run multiple three phase motors from just one phase converter. Allowing you to run multiple three phase motors off single phase power! DISCLAIMER: The information and pictures are believed to be accurate to the best of our knowledge. Obtained from sources deemed reliable. However, we do not guarantee accuracy of info
Powermatic Index ring and plunger for grinder
Powermatic indexing ring and plunger off 24" Powermatic model 225 but may fit others with 4&7/16 oc mounting holes or with modification. I have three indexing rings off models with direct drive and belt drive. Be sure to tell me the bore size you need when ordering and I will ship that one. 1&11/16" bore 1&3/4" bore 2&1/2" bore I can custom bore these out with-0/+.008 tolerance for $25 as well
16" Powermatic planer 5 HP 208-220/440 Volt 3 phase
Model 160 Powermatic 16" Industrial planer. Serial# 06094. Up to 6" planing depth. 16" X 32" bottom table. Baldor 5 HP 208-220/440 Volt 3 phase 3450 RPM motor. 213 frame. Motor is independantly mounted and can be changed to single phase.
Delta 15" Cutterhead Head with Blades Grizzly Powermatic Jet
I removed this from my Delta X5 Model 22-785X planer and installed a shelix head. There is nothing wrong with it. It also comes with two sets of planer knives. They need sharpening. Im sure this head will fit many other planers. Thanks for looking. It does weigh 30 pounds and will ship UPS.
POWERMATIC MODEL 66 10" SAW HANDLE SHAFT WORM GEAR
Up for sale is a Powermatic model 66 10" cabinet saw handle. Lock knob, shaft, worm gear and mounting piece. Items are in good usable condition. Big Daddys vintage tools is a small individually ran company located in Baldwinville Massachusetts. I mostly sell vintage machine parts but you will also find various other items. I am a part time seller and sell from a store rather than auctions. I find it easier to manage store selling than bulk auctions. Starting in June 2012 I will be dropped from some searches. So please if you like what I sell save me in your favorites. I can not offer one day shipping or 14 day free return shipping. I sell vintage machine parts and various other items purchased at auctions.Estate sales and yard sales. I do my best to tell the truth and honor my mistakes. There have been no items were I refused a full ... morerefund including return shipping when I have made a mistake. I find most all buyers just want what they bought. But for what I sell I am going to continue with my policy of 5 days. That is please contact me if there is a problem within 5 days. I give some slack because if you get a item on a Monday you might not get a chance to really check it out until Saturday if your working. Please then contact me so we can resolve the issue. Shipping please read: Shipping is a necessary evil nobody likes to pay it. However it is necessary and for what I sell. I must charge shipping! I try to keep the cost down and do not charge a packaging fee. Some time back the host started charging a finale value fee on shipping. This means they collect a percentage of the shipping cost besides the standard item cost. On a smaller USPS Priority mail item the cost is really not effected, any difference I absorb as the seller. However on larger items shipped UPS Ground or trucking, I must add weight or adjust to reflect the percentage the host takes. For ex sample if I'm sending a 100 pound item from Massachusetts to Oregon via UPS Ground I would be paying 10 dollars towards shipping. Heavier trucked it
Vintage PowerMatic Scroll Saw Model 95 - Powers On - Blade Broke - T622
Bid with confidence. On eBay for 15 years! Trusted seller with 100% feedback approval and high star ratings in all categories. We are honest in our listings, we ask that you read the ad carefully. If you are not sure about an item please ask questions before bidding. We rarely answer questions on weekends and during holidays, we will reply first thing next business day. Thank you for looking at my auction. Dan Batson, DGD Inc Please email for a shipping quote prior to bidding. Vintage Powermatic Scroll Saw Model 95. This item is in good cosmetic condition. The blase is broke in half(please see pictures) When powered on the bottom half of the blade moves. When I hold the top half of the blade and move it up and down it moves up and down freely. The table is 14"x15" It is in overall good condition. It has some surface scratches(please ... moresee pictures) The table tilt is 45° RIGHT. 15° LEFT AND TURNS 90°. We received this item from a school surplus sale. It is on a removable base. The removable base is where the power supply is located. the frame is a"J 56Z" It is a 115-230 volt. Please view all pictures of this item carefully. I will be happy to answer any questions you may have on this item. I am selling this unit as I have described it. Shipping cost is by freight truck, please email for a quote BEFORE YOU BID. Include zipcode& if you have a forklift or loading dock or not. This unit is big and will need to be truck shipped on a pallet. You can pickup this equipment in Springfield. MO at no charge. Please email me for accurate shipping quote BEFORE YOU BID. When you email please include your zipcode. Commercial or residential address(home businesses do not qualify as commercial address) and if you have a loading dock or forklift. I do some travel in the Midwest for possible delivery for a fee. Contact me to find out where I will be traveling over the next few weeks. I get discounts thru several different trucklines and will pass that onto you. There is a $25 packing charge for m
GOULD POWERMATIC 12" DISC SANDER #35B
Hello! Up for sale is this GOULD POWERMATIC 12" disc sander. 3-phase; 480v HP; 600v~30a. It's in good. Working condition and ready to be used. Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13e0a5480c6-0xff-
POWERMATIC 26 SHAPER CUTTER GUARD
Powermatic 26 shaper cutter guard. Item used in good condition missing wheel. See pictures for details. Please check out my other auctions. `0d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*fc%3E%3E%600d-13e0b36f808-0xef-
Powermatic Planer Model 180 Parts Drive Sheave, Clutch, Handle, Headstop
This auction is offering four Powermatic Model 180 Planer parts. The drive sheave clutch. Clutch handle, and the head stop mechanism. MPN: 180-609 Drive Sheave. Clutch MPN: 180-612 Clutch Handle Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction ... moreand shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior
POWERMATIC 66 10" LEFT TILT TABLE SAW 52 BIESEYMEYER RIP FENCE 230V SINGLE PHASE
NICE POWERMATIC 66 SINGLE PHASE 3HP WITH 52" BIESEYMEYER FENCE. BUYER PAYS FREIGHT SHIPPING ON 700LBS FROM 30527 012-06-02-725/4602 PLEASE READ BEFORE BIDDING: EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM ... moreBACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, PAINT, ENGRAVING OR GREASE ON THEM. ASK FOR BETTER PICS IF YOU CARE* All it
6" X 48" Powermatic Belt & Disc Sander
6" X 48" Powermatic Belt& Disc Sander Serial Number: 9230029 Equip and Specs: Model: 30B Belt size: 6" x 48" Disc size: 12" Belt table: 7" x 17" tiling Disc table: 7" x 17" tilting Approximate size: 30" x 37" x 56" Includes 2 additional new sanding belts Elect Specs: 1-1/2 HP; 220/440/3/60 Condition: Very Good Location: 26470 Lakeland Blvd. Euclid, OH 44132 Guarantee: 30 day return privilege- freight prepaid by buyer Terms: Net with order Price: F.O.B. Location $975.00 Stock# S212127 If you have any questions regarding this machine or its tools. Please don't hesitate to email us with questions. Most emails will be responded to within 24 business hours. Include the Stock number with your email. Here at Small Tools Inc. Our highly skilled staff fully runs and tests the machines ... morefor sale to ensure you get a quality product. If you are able to. Stop in to our warehouse. We can put you in the driver's seat and have you operate all of the machine's features before you buy. We pride ourselves on being an honest American-owned company. We can also send videos upon request of the machinery in action if you aren't able to make it in to our facility. Shipping is of the responsibility of the buyer. But a free quote can be given after purchase has been made. Contact us for more information on shipping or arrangements. This machine is subject to prior sale in our brick-and-mortar building unless otherwise noted. Thank you for looking! Very Truly Yours, Small Tools Inc. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Powermatic 3-Hp 3-Ph 10" Table Saw Tilt T-Square 50" Fence Guard Biesemeyer
Questions? Call us: 1-877-328-9236. Powermatic 3-Hp 3-Ph 10" Table Saw Tilt T-Square 50" Fence Guard Biesemeyer. Manufacturer: Powermatic Model: Unknown Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Powermatic Condition: Used. Comes in non-original packaging. It has scuffs and scratches from normal use. Notes: NOTE: The belts are worn and some are torn. They should be replaced for safe and proper operation. The blade shroud is hand made out of wood and will have to be enlarged to accommodate a larger blade. When powered on this saw ran very smoothly. It cut through a 2 x 4 with no problems. The tilt moves the blade back and forth with ease. No further testing was done. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Powermatic 10" ... moreTable Saw T-Square Biesemeyer Fence, Specifications: Table Saw: Manufacturer: Powermatic, Model: Unknown, Currently: 8" Blade. Double/triple cut 1/4" approximate) 3 Belt System(as seen in the pictures) Blade Guard System, Blade Tilt: 0 to 45 degrees, Overall Dimensions: 79"W x 34"D x 55"H, Work Surface Dimensions: 73"W x 28"D x 34"H, Motor: Manufacturer: Baldor, Model: VM3559T, 3 Hp, V: 208-230/ 460A: 7.8-7.4/ 3.7, 60 Hz, Frame: 145TC, 3450 RPM, 3 Phase, Fence System: Manufacturer: Biesemeyer, T-Square Saw Fence System, Ruler: 1" to 50" Blade Guard: Manufacturer: Biesemeyer, T-Square Blade Guard System, Shut-Off Switch. Keyed(not currently connected) SKU: N15L010 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped
Powermatic 68 Tilting Arbor Table Saw 12" 3 Phase 5 Hp 230 V 3450 RPM + Miter
The Powermatic#68 table saw is larger than the model#66 saw. Comes outfitted with a 5Hp 3 phase motor running 230V. The table is in very good condition. With some very minor scratches, no significant dings or any breaks. Comes with a miter gauge and arbor wrench. Fits up to a 12" blade and features a tilting table. Includes Gould starter switch. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional ... more$35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. Items will be shipped on the first Tuesday or Friday following payment We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company
Powermatic 14" Floor Drill Press Model 1150
Powermatic 14" Floor Drill Press Model 1150 Description- Part Number: 1150- Manufacturer: Powermatic- Serial: 4-4025-1- Motor Output: 3/4 HP Motor. 1725 RPM 115/230 1PH- Spindle Taper: 1/2" Jacobs Chuck- Spindle Speeds: 400 to 5300 RPM- Quill Feed: 6" Table Size: 14-3/8" x 10-1/4" Base Working Surface: 8-1/2" x 12" We have two available as pictured. Both have been tested and work good. 7076( JK)2/4/13 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If ... moreyou feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. Freight Shipping: Freight Shipping is highly variable in costs over time. Please contact us before paying for your item so we can get you the best rate available at the time and send you an invoice reflecting the savings. We get very good shipping rates and are normally much cheaper than eBay’s freight calculator. Freight Shipping Requirements: Freight shipping requires complete contact information including: Company Name. Individual Receiver, Complete Address, and a Contact Phone Number. We will als
Powermatic 15" Floor Model Drill Press Model 1150 (Inv. 14807)
Powermatic 15" Floor Model Drill Press Model 1150: SN: 3-51582 5 speeds. 400 thru 5300 RPM Capacity: 5/8" Aluminum 5/8" Cast Iron 1/2" Steel 6" Spindle Travel 3 phase. 1/2 H.P. 208/230/440 volt. Tilting table 90 Degrees left to right. 1/2 Drill chuck with key. Inv.14807) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping ... morequotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
Powermatic 66 Tablesaw Cast Iron Extension Wing 20 x28
Powermatic 66 wing. 20 x 28 inches has some hammer marks in one corner and a few dings and scratches. Flat across the 20 inch short dimension, about.015 bow across the 28 inch long dimension and about.030 bow diagonal from corner to corner. The bow should straighten fairly easy hitting the backside with a block of wood and a hammer or it could be used this way. I had a model 72 saw at one time that had.060 bow in its cast table but the wood I was cutting never seemed to mind. There are no cracks or breaks that have been fixed. Will bolt right on to any 66 saw or 26/27 shaper. Weighs about 90 pounds. Its bigger mate is on another auction.
Powermatic 66 Tablesaw Cast Iron Extension Wing 21 1/2 X 28
Powermatic cast wing 21 1/2 X 28 inches. Dead flat across the short length about.005 to.010 bow across the long length and the same across the corners. Has some scratches and dings. No welds or cracks. Will bolt up to any 66 saw or 26/27 shaper main table then you can bolt your 8 inch wing to this wing. Weighs about 95 pounds. Its smaller mate is on another auction. c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13e0ef941d7-0xfa-
Powermatic model 32 belt sander
Works good! Heavily built single phase 120v 6x48 belt missing table
Powermatic 225 Planer, ATFS, 24" x 8" cap., 15HP, 20-100 FPM, Sectional Infeed
Cleaned and checked. All specifications subject to verification. 24" x 8" Cap. 15 HP V-belted cutterhead motor. 1.5 HP feed motor. Variable feed speed from 20- 100 FPM. 4" Sectional infeed roller. Sectional chipbreaker, 1/8" min. stock thickness, 4" min. stock length butted, 13" min. stock length not butted. 24" x 48" Cast Iron bed, 2) 4" driven bed rollers. Framing or crating will incur additional charges. If needed Please Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if item is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse work load and ... morepotentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. PAYMENT TERMS: Full Payment or deposit required within 24 hours of order. NO EXCEPTIONS. Items not paid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost.
GRINDER BAR for a POWERMATIC 220 SINGLE SURFACE PLANER
GRINDER BAR for a POWERMATIC 220. 20" SINGLE SURFACE PLANER.If you have any questions please ask. Good luck and thank you very much! Please see more of our inventory here And http:picasaweb.google.com/pleasantstmachinery I will ship anywhere in the US as long as buyer sets up freight PLEASE READ THE FOLLOWING CAREFULLY Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. Fees A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. There is a $5.00 handling fee on all items. An additional $25/pallet fee is required for ... moreeach pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. Many of our customers have used the following trucking/freight companies for their truck/freight needs: Small Business Transportation at 888-368-6022 x218(gil) or Freight Quote at 888-595-6298 x1250 Bob. All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to either of these or any other selected trucking/freight companies. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold"AS IS. AS PICTURED” Feel free to Contact Me. You may e-mail me at th
Powermatic 1150 / 1150A Drill Press Part - HANDLES
Powermatic Model 1150/ 1150A Drill Press Part. All parts are in GREAT MECHANICAL working condition and are in VERY GOOD Shape! I Have MULTIPLE Drills i am parting out and have LOTS of EACH part! HANDLES. WILL COMBINE SHIPPING. GOOD SHAPE! 5=2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B%3E5%3D2-13e108e38ba-0x100-
Powermatic 15" Drill Press 1150, Single Phase
Powermatic Model 1150 15" Drill Press. Floor Model in excellent working condition. SPECIFICATIONS: VARIBLE SPEED: 475 TO 4800RPM SINGLE PHASE THROAT DEPTH: DRILLS TO CENTER 15" SPINDLE TAPER: 2 MT(10 Spline) SPINDLE TRAVEL: 6” QUILL DIAMETER: 2 3/16” COLUMN DIAMETER: 3” TABLE SIZE: 10" x 11" BASE WORKING SURFACE: 81/2" x 12" MOTOR: 3/4 HP/ 1 PH/ 115/2 3 0 VOLTS MECHANICAL SPECIFICATIONS: 62” HIGH WEIGHT: 310 LBS(APPROXIMATE) Pick Up Only(may be able to assist in local delivery)
Used Grizzly 8" jointer cutterhead 4 knife head may fit jet powermatic shop fox
I recently changed the cutterhead in my Grizzly G0586 jointer to a grizzly indexable spiral head and this the cutterhead it replace. Its a four knife head and the blades that are in it now are the original blades that came in it and have never been out. It also has the pulleys. Bearings, bearing blocks, mounting bolts and I will include a new 4 piece blade set with it I bought but never installed. according to the grizzly site it should fit several other machine but that research is up to the bidder and there will be no return this item if it doesn't fit your machine. I only charge actual shipping charges and this item weighs about 21 pounds and will ship in a large priority box. I also have a new 15 inch cutterhead listed in another listing. Check out my! Make sure to check out the forstner bits and milwaukee sawsall blades I have listed.
Powermatic 66 Tbl SAW WOODWORKING, 10", 5HP, Tilt Blade
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking Powermatic 66 Tbl SAW WOODWORKING. 10" 5HP, Tilt Blade Ref# 146126 iammdna XWOODW Powermatic 66 Cabinet Table Saw 5HP. 3Ph, 230V, Magnetic Control. 50-Inch Accu-Fence System, Rout-R-Lift System NOTE: ... moreMachine does not include the wood tables positioned on each side of the saw- these were discarded to cut down on the shipping. Features: On its own merits. The Powermatic 66 saw boasts the heaviest cast iron trunnion of any 10 inch saw on the market. Reducing vibration and ensuring smoother cuts. To deliver even more horsepower to the blade. Powermatic installed a premium high efficiency two-3VX drive belt system which distributes torque more efficiently. To all this. Add the perfect companions, the Accu-Fence system and router lift. The Accu-Fences award winning design utilizes only two moving parts to create an easy gliding. Precision fence with a full 50 inch right hand and 12 inch left hand cutting capacity. The Powermatic/Accu-Fence System will significantly reduce your labor and wasted material. Price includes loading onto your truck. Or we will arrange shipping for you- trucking is additional. We will skid, if necessary. Machine Location: HARRISON. NJ Click Here For More Powermatic Machines Click Here For More Non-Metalworking& Shop Support Eqpt- WOODWORKING MACHINERY(s) Questions about this Machine? Call Gene at(800) 873-6224 ext 7502 Need a Freight rate? Call Al
POWERMATIC 18" UP CUT SAW
POWERMATIC 18" UP CUT SAW GOOD WORKING CONDITION Powermatic Model COS18R. 10HP, 3Ph, 230V/460V, Right. When you need a fast, square cut and big capacity, the COS18 Cut Off Saw makes short work of any job. It's ideal for cutting lumber, plastics, composites and non-ferrous materials. Powered by a heavy-duty 10HP motor, the 18" blade handles heavy work. Designed for production cutting of up to 70 cycles per minute. Standard equipment includes a pneumatic safety guard on the infeed and a full basket guard on the outfeed side. The saw is constructed with a cast iron table and heavy steel plate body, built for production cutting. The blade is mounted to a chrome steel alloy arbor that is precision ground and balanced. Powermatic 10 HP Cut Off Saw Features: Saw body constructed of heavy steel plate and full seam welded. Offers a rock ... moresolid platform and ensures accuracy The 18" blade and 10HP motor combine for big capacity Large air cylinder and shock absorber produce fast cycle times with reduced vibration Pneumatic guard over infeed and basket guard over outfeed provide full coverage Heavy steel plate and cast iron construction for production work and durability Foot pedal for convenient blade activation Full magnetic controls for safety Quick adjust clamp head allows rapid set-ups Door lock out switch prevents starting when cabinet is open Powermatic 230/ 460 Volt Saw Machine Specifications: Motor Power: 10 HP Motor Phase: 3 Ph Motor Voltage: 230/ 460 V Motor Voltage Prewired: 230 V Blade Diameter: 18 Inch Arbor Diameter: 1 Inch Arbor Speed: 3.320 RPM Cutting Capacity at Maximum Height: 4 3/8 Inch x 10 1/2 Inch Cutting Capacity at Maximum Width: 1 Inch x 13 3/8 Inch Table Size: 26 1/2 Inch x 28 Inch Table Height: 33 Inch Air Supply Required: 15 CFM/ 70 PSI Cycles Per Minute Maximum: 70 RPM Dust Port Diameter: 4 Inch Dust Collection Minimum CFM Required: 600 cu.ft/min Model Number: COS18R Overall Dimensions: 33 x 35 x 45 Height: 45 Inch Width: 35 Inch Length: 33 Inch Powermatic 1791289 Includes: 18
USED 6 X 12 POWERMATIC SURFACE GRINDER MODEL#1270
USED 6 X 12 POWERMATIC SURFACE GRINDER MODEL#1270 This item was removed in operating condition from local manufacturer. We cannot test this item so it is being sold"AS IS WITH NO WARRANTY" We buy and sell pre-owned surplus products and company inventory reductions. We are not representatives or authorized distributors. Nor are we affiliated with any manufacturer. Brand or product listed. Designated trademarks, brand names and brands appearing in our ads. Are the property of their respective owners. Purchaser(s) Their agents, assignees or affiliates assume all responsibility& liability for use. Miss-use or application(s) of the item(s) purchased from this seller. SHIPPING Shipping must be paid in advance. No shipping on week-ends or Holidays, no shipping on Customer Accounts. Ship internationally USPS Only. The full value of ... morepurchase will be declared on Customs Forms All value fees and taxes are the sole responsibility of the buyer. Please consider these terms carefully before bidding on. Or purchasing this item. Refer to your order details page for your tracking number to track your package. If you would like a copy of your invoice or a packaging slip. Then please specify this with your payment at check out. FREIGHT Any freight items is left up to buyer to set up a freight company and pay all shipping charges. We offer to build crating for any item for a fee. Depending on size of item. We do not have a loading dock for trucks but are able to load trucks with fork lifts. Please contact us if you have any questions. We appreciate you and your business. If you have any questions or concerns about your purchase. Let us know BEFORE leaving feedback. We try to provide honest, detailed and accurate descriptions of all items. We strive for 100% customer satisfaction. We try to keep the shipping cost as low as possible& provide an efficient and reliable service. Posted with
POWERMATIC MODEL 66 10" LEFT TILT TABLE SAW 52 BIESEYMEYER FENCE
SELLING A POWERMATIC MODEL 66 TABLE SAW WITH 3 HP MOTOR COMES WITH 52" BEISMEYER FENCE AND TABLE EXTENSION ALSO COMES WITH MOBILE BASE AND WRENCH. THIS ITEM IS FOR LOCAL PICK-UP ONLY THANK YOU FOR LOOKING
Powermatic 24" Drum sander
Model DDS-225 This unit sells for over $4500+ tax($400) your looking at $5000 plus shipping new. this unit is only 4yrs old. LOOKS NEW! Very very nice and lightly used 24" drum sander. 5HP motor for plenty of power• Independently adjustable rear drum for fine tuning• Hard durometer rubber coating on steel drums provides flat. Smooth finish• Two-speed gearbox for wide range of sanding projects. Full size cast iron table for solid support• Forward/reverse poly conveyor belt grips stock evenly• Dual dust ports with directional baffles for more efficient dust removal• Standard Equipment: Two speed gear box• Dual 4" dust ports• Sandpaper on drums Style(Type) Drum Drum Length(In. 24 Number of Sanding Drums 2 Drum Speed(RPM) 1.720 Drum Diameter(In. 6 Conveyor Motor(HP) 1/4 Maximum Board Thickness(In.5-1/4 Maximum Board Width(In. 25 Minimum ... moreBoard Length(In. 9 Minimum Board Thickness(In.1/32 Dust Collection Minimum CFM Required(CFM) 600 Dust Port Outside Diameter(In. 4 Electrical Controls 230V Magnetic Motor Power(HP) 5 Motor Phase 1 Motor Voltage(V. 230 Shipping is for lower 48 states ONLY! Contact me with any questions. Posted with eBay Mobile
POWERMATIC (220) 20" PLANER CLEANED AND CHECKED!
POWERMATIC(220) 20" PLANER 22" x 8" Width/Thickness capacity 10 HP V-belted cutterhead motor, 1.5 HP feed motor. Variable feed speed from 20- 100 FPM. 4" Sectional infeed roller. Sectional chipbreaker 1/8" min. stock thickness 4" min. stock length butted 13" min. stock length not butted. 24" x 48" Cast Iron bed Voltage: 230/60/3 phase Region: Charlotte. NC Email: dan@globalmachineryco.com for freight quote or leasing information. Any additional questions contact Dan at 704-771-0479
Powermatic Model 26 Spindle Shaper 1" dia. x 4-1/2" long spindle, 1Ph, 3HP motor
Powermatic Model 26 Spindle Shaper General Info: Stock# 1112491 Condition: Used Tested: Item has been tested Brand: Powermatic Model: 26 Serial: 8226253 Year: N/A Weight: N/A Machinery Details: 1" Diameter x 4-1/2" Long Spindle-3HP Motor-110/220V 1 Ph-Magnetic starter-Adjustable Fench. Guard-4" dust outlet-28" x 30" cast table-2-speed pulley-Wired 220/1ph Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 4732-G N Royal Atlanta Dr. Tucker. GA 30084 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13e2510f5ab-0xf8-
Powermatic PM 1150 Drill Press
This is a 15" Powermatic PM 1150 Floor Model Drill Press in Outstanding Condition. It is the Variable Speed(Reeves Drive) Model that is powered by a 3/4 hp. 1 phase motor, has a Jacobs 33 taper 0-1/2" chuck, the full range of speeds are shown in the photos. The quill return spring will need adjusting due to a slow speed return spot due to the fresh paint job. A copy of the owners manual is included and it weighs in at 310 lbs. Local Pickup is offered and I can lower the table and head. Bolt it to a pallet then deliver it to a Freight Terminal for Shipping at the Buyer's Cost(360# from zip 37660) for an additional $25. I can get low freight quotes through my account.
Powermatic HPS 67 sliding table saw
Powermatic HPS 67 sliding table saw w/ scoring. 5Hp. 3 phase 230V, 1” blade arbor,12” blades, 13/16” max dado, New $9500. Like new, very little use. Seller can fork lift saw to truck. Shipping to be arrangements by buyer. Information: 707.554.1724.
Powermatic 143 bandsaw drive
Powermatic 143 drive wheel pulley in great condition.
Powermatic 143 gear box drive
drive from a powermatic 143. Also listed is the other pulley set to convert a 141 to a 143 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13e280fedc3-0xfa-
Powermatic 141-143 band saw wheel
Bandsaw wheel from a Powermatic 143 saw in great shape.
PowerMatic Table Saw jig accessory Woodworking
not really sure what its for. little surface rust
Powermatic planer model 220 20" 10 hp 3 phase
Powermatic surface planer. 20" width. Segmented steel infeed rollers for roughing or finishing planing. 10 hp horse power 3 ph phase motor 220/440 v volts 23/13 a amps. Currently 220. Have the honing and grinder set up too. Bar on machine, grinder on a shelf not shown. Have a reprint of the owners manual. Serial number 5-5297-b equals 1955. Should be green in color, prior owner sent back to Mcminnville in 1996 for rework, got repainted their current gold color. First piece of dust hood goes with purchase. Have a lift that goes 59" up. Can set on your flatbed truck or trailer for free with payment at time of pickup. Estimate about 2.200 lbs? Call or email for shipping details. Can arrange freight pickup for expenses. Paypal not accepted. Cash, money order, business check or credit cards accepted. A great machine ready to put into ... moreservice.
Powermatic Model 180 18" wide x 6" Single Planer
Powermatic Model 180 18" wide x 6" Single Planer General Info: Stock# 413542 Condition: Used Tested: Item has been tested Brand: Powermatic Model: Model 180 Serial: 8580205 Year: N/A Weight: 1255lbs Machinery Details: 18" Wide x 6" single planer-5HP Motor-230/460V 3 Ph-Sectional feed rolls and chip breaker-3-knife cutter head-Dust hood. Starter and push button-Variable speed drive Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 4732-G N Royal Atlanta Dr. Tucker. GA 30084
Powermatic Model 100 12" x 6" Single Planer 3 knife head 1PH 220V
Universal Listing Code- Mark Powermatic Model 100 12" x 6" Single Planer General Info: Stock# 413537 Condition: Used Tested: Item has been tested Brand: Powermatic Model: 100 Serial: 200151 Year: N/A Weight(Approximate) N/A Machinery details: 12" Cap. with 1/16" to 6" thickness opening-3HP Motor-5.300 RPM belt driven head-220V/1Ph-3 Knife Head-Solid C/B and feed roll-Starter. Cord& Plug Cover is missing on back of unit and cover over gears. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 4732-G N Royal Atlanta Dr. Tucker. GA 30084
Powermatic Wood Planer 16" Width / 8" Depth Professional Heavy Duty With Motor
Powermatic Wood Planer 16" Width/ 8" Depth Professional Heavy Duty With Motor Motor: WEG- 5 HP- 60 Cycles- 1 Phase- 208 to 230 VAC at 22 Amps or 460 VAC at 11 Amps- 3460 RPM- Continuous Duty A personal inspection is encouraged. We are located in Odessa. Texas, 79761 and are available Monday through Friday from 9:00 am to 5:00 pm central standard time. Send an Ebay message or call us at 432-332-9588 for additional information. Ask questions before bidding. Other payment options are also available. This saw is sold"AS-IS" What"AS-IS" means is what you see is what you get and that we do NOT warrant the item. There are NO returns for products sold"AS-IS" If you need additional pictures let us know what angle or area you need a picture. Send an Ebay message or call. Local pickup or freight shipping is available. ... moreIf you choose local pickup your winning bid is the invoice price. No charge loading help is available by appointment. Payment at pickup to be cash or cashier's check. If you choose freight shipping an additional charge of $50.00 will be added to the invoice to partially cover the labor and materials of a wooden box to protect the saw. Freight shipping will require payment before the freight company will be allowed to pickup the saw. Please pay and/or pickup within seven business days of winning. If this time schedule is a problem let us know. We are flexible. Used machines may not incorporate approved activating mechanisms. Operator safety devices or safety guards as required by OSHA or otherwise. It is the user's responsibility that these machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. User agrees to indemnify and hold Seller harmless of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agent to follow instructions, warnings, or recommendations furnished by manufacturer, or Seller, or by failure of user to co
PARTS- OPERATION MANUALS, INDUSTRIAL TOOLS. POWERMATIC-LEBLOND-DOALL +
PARTS- OPERATION MANUALS. INDUSTRIAL TOOLS. POWERMATIC-LEBLOND-DOALL +. Click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge INDUSTRIAL TOOLING. HEAVY MACHINERY. OPERATION. PARTS, OR SERVICE MANUALS. 14 BOOK WHOLESALE LOT. Rare and hard to find Manuals. Catalogs, Technical Info. GREAT FOR RE-SALE. Some of these manuals may sell for several times the starting price of this Auction. My consignor just wishes to liquidate his inventory. Manuals in this lot; POWERMATIC LATHE. LEBLOND TAPE TURN LATHE. POWERMATIC SCROLL SAW. LEBLOND GRINDER, ROCKWELL DRILL PRESS. BRIDGEPORT SERIES I MILL. DOALL SURFACE GRINDER. LOGAN LATHE. ATLAS LATHE, SOUTHBEND. FICEP. PROFITMASTER. Thanks for viewing. 4/21-3396-2320. We are constantly adding ... morenew items daily Re-Purposing and Renewing Vintage items Our Pickers work hard to find. and bring back to market. Unique items Subscribe to our Ebay store NOW and stay informed daddysgarage2012 is our seller Id Semi Monthly Updates emailed directly to your email address LOW PRICES Vintage and Antique ALWAYS LOOKING FOR THE BEST OFFER VISIT OFTEN The small details Almost all our items listed are used unless noted, There might be small scrapes. Scratches or surface issues not mentioned in the main description but expected with used products. We will do our best to describe this item and any faults that it may have. Items your bidding on are sold"As Is" Should you have any questions about this item please ask questions before bidding. Please check out photos and ask us any questions if you need clarification on one of our products Our photos can lighten up or whiten some of our items. If an item is yellowed we will mention that in the information We will accept returns as long as the winning bidder notifies us within 24 hours of receipt with complaint THANKS for viewing and GOOD LUCK- Our Inventory is constantly changing with new additions so be sure to add our store as
Powermatic 15 inch Planer 3HP
This is a PowerMatic professional 3HP 15 inch wide planer. VERY HEAVY DUTY. It has been used for years in my Grandfathers's wood working shop and he has passed away. We no longer have any need for it!
Powermatic bandsaw, heavy duty bandsaw w/ insta weld built in.
Working HD bandsaw. A picture is worth a thousand words! We can arange local delivery(we are in north hollywood ca. or you can pick it up.
POWERMATIC 90 WOOD LATHE SPINDLE ADAPTER 1 1/2" X 8TPI & 3" FACEPLATE 1 x 8TPI
VINTAGE POWERMATIC 90 WOOD LATHE SPINDLE ADAPTER& FACE PLATE Estate sale find in Good working condition. BOTH ARE.Inboard/right hand thread RARE POWERMATIC Spindle Adapter 1-1/2" x 8 TPI 3" Face Plate 1" x 8 TPI Will make a nice addition to your wood turning tool collection. Be sure to view all pictures and please feel free to ask any and all questions BEFORE bidding. Thank you for looking. All Sales Are Final.
Powermatic 8" jointer, model 60, long bed
Powermatic jointer. 8 inch, long bed Model 60. A classic! Features: Huge bed. 9" wide by 65" long Can be easily operated on single phase 220VAC power(standard household current) By application of VFD(can be included for cost of unit. ~ $150) Or can run directly from 3 phase power Cast iron where it helps: fence and bed are large CI castings! Works great! Currently hooked up and available for demo Local pickup or crated for freight Crating fee of $300. Buyer responsible for shipping costs
Powermatic model 81 vertical bandsaw (21 inch)
Model 81. Vertical bandsaw
Powermatic 4" Grey Lathe Tool Rest 2-3/4" x 1" Post
This listing is for a vintage Powermatic grey lathe tool rest. The stem is 4" in length and the post is 2-3/4" long and 1" in diameter. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and ... moresize of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED.
Vintage Powermatic Orange Lathe Tool Rest, 6" Stem, 2-3/4" Post, 1-1/8" Diameter
This is an orange. Vintage, Powermatic lathe tool rest. The stem measures 6" the post is 2-3/4" in length and 1-1/8" in diameter. The model number is L22. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent ... moreupon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items ar
Powermatic model 10 mortiser
Powermatic model 10 hollow chisel mortiser. 1.5 hp 220/440 3 phase. wired 220. 5/8" or 1&1/8" chisel shaft. Jacobs chuck 0"1/2" Includes one ea. 1/2" chisel and bit-good condition& one ea 3/8" chisel and bit-not so good condition. ALSO INCLUDES 2 MORE CHISELS AND BITS IN GOOD CONDITION. chuck key. Not original holding clamp but works ok. All works good. Runs good and quiet. Net weight before any boxing is approx. 650 lbs If you want it palletized and shrink wrapped the cost is $45 If you want it crated the cost is $145 I have a business address and fork lift to load and my zip is 77095. Call 713-823-4929 for more information.
Powermatic Model 26 Professional Shaper
Powermatic Model 26 Spindle Shaper with 3/4” dia. X 4 ½” long threaded spindle. 5HP, 208/230/460 volt, 3PH motor, 2-speed pulley, magnetic starter, reversing switch, adj. fence, guard and 4” dia. dust chute. Machine has a static Phase Converter installed and can run on conventional 220 Single phase power. Or convert back by removing the converter Also included is mobile base If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact Eric at 917-439-7121 Machine is located in Weston CT 06883. Machine was used in private home shop sparingly for the last 10 years
Powermatic Model TS29 7.5HP Tilt/Slide Shaper Table
Powermatic Model TS29 7.5HP Tilt/Slide Shaper Table General Info: Stock# 413511 Condition: Used Tested: Yes Brand: Powermatic Model: TS29 Serial: 0601TS29196 Year: N/A Shipping Weight: 1500 lbs Shipping Dimensions: 56" L x 52" W x 60" H Specifications: Features Sliding table with 4-foot stroke works with miter head. Hold-down and fence to accomodate everything from multiple end cuts to tenons Fully adjustable fence with dual readout for fast. Accurate set-up and repeatability Large table with built-in slider with room for stock feeder 7" vertical spindle travel allows stacked tooling Spindle tilts negative 5 to positive 45 for increased versatility Large diameter multiple table inserts accomodate virtually any size cutter Five spindle speeds in forward and reverse with lighted indicator Specifications Spindle Speed: 3000. ... more4000, 6000, 8000 and 10,000 RPM Spindle Diameter: 3/4. 1 and 1 1/4" Spindle Travel: 7" Table Size: 51 1/2 x 33 1/2" Slide Table Size(L x W) 11 1/4 x 51 1/4" Fence Size(L x H) 46 x 5" Table Inserts: one tilting. Two straight Router Bit Collet Diameter: 1/4 and 1/2" Dust Collection Minimum CFM Required: 800 cu.ft/min Motor Power: 7_ HP Motor Voltage: 230/ 460 V Table Height From Floor: 34" Motor Phase: 3 Ph Overall Dimensions: 51 x 44 x 53 Net Weight: 1100 pound Additional Info: Power cord not included. Currently wired for 230V. We are not trained mechanics or specialists of the following machinery listed and therefore can't guarantee full functionality or specs of the machine. It is always recommend to come out and inspect the machinery listed before purchase. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Seller Contact Information: Mark Davis 404-272-1285 The Equipment Hub. LLC 4732-G N Royal Atlanta Dr. Tucker. GA 30084 Visit Us on the Web at
MA D POWERMATIC 12" DISC 6X48 SANDER WITH TILTING TABLE #30B
BUY IT NOW NO WAITING. POWERMATIC COMBINATION 6X48 BELT SANDER AND 12" DISC SANDER. MODEL 30B. HAS ONE TILTING TABLE NO MARKS OR RUST. 230-460 VOLTS 3PH. MISSING COVER FOR CONTACTER AND ONE CLAMP FOR TABLE. YOU GET WHAT IS PICTURED AND NOTHING ELSE. PAYPAL TAKEN. QUESTIONS CALL JUSTIN 619-253-6499. I SELL A LOT OF DIFFERENT ITEMS AND AM NOT A EXPERT ON THEM I MAY NOT NO IF SOME THING IS MISSING OR COMPLETE AND IT IS YOUR RESPONSIBILITY TO DETERMINE THAT AND I WILL NOT BE HELD RESPONSIBLE OR LIABLE IF SOME THING IS MISSING OR NOT COMPLETE. READ AD COMPLETELY. IF I DON'T RESPOND TO YOUR EMAIL YOUR QUESTION WAS ANSWERED IN THE AD OR YOUR SPAM FILTER WAS ON. LOCAL PICK UP WELCOME. FOR LARGE ITEMS EMAIL FOR SHIPPING COST. CHARGE $ 50.00 PACKAGING COST. QUESTIONS CALL JUSTIN 619-253-6499. BY BIDDING YOU AGREE TO ALL OF THE TERMS AND CONDITIONS. ... moreBY BIDDING YOU ARE INTERRING INTO A LEGAL AND BINDING CONTRACT AND ARE EXPECTED TO PAY. YOU ARE RESPONSIBLE FOR ALL LEGAL FEES AND EXPENSES INCURRED COLLECTING THE MONEY OWED. IF DEFAMATION OF CHARACTER HAPPENS YOU ARE RESPONSIBLE FOR ALL ATTORNEY FEES AND EXPENSES. IF MAILING P0STAL M0NEY 0RDER 0NLY SEND TO JUSTIN WOOLSEY. 1155B POGO ROW, SAN DIEGO CA 92154. TYPE YOUR NAME, ADDRESS, PHONE NUMBER, AND ITEM NUMBER. AND IF YOU WANT SHIPPING INFORMATION INCLUDE YOUR EMAIL ADDRESS. WHILE DESCRIPTIONS ARE BELIEVED TO BE ACCURATE THE SELLERS MAKE NO WARRANTIES OR GUARANTEES. EXPRESSED OR IMPLIED, AS TO THE GENUINENESS, AUTHENTICITY OF, OR DEFECT OF ANY ITEM(S) BEING SOLD AND WILL NOT BE HELD RESPONSIBLE FOR ANY ADVERTISING DISCREPANCIES OR INACCURACIES, INCLUDING WITHOUT LIMITATION ANY PICTURE, DESCRIPTIONS OR OTHER INFORMATION RELATING TO THE ASSETS.ALL ITEMS ARE SOLD ON AN AS-IS WHERE IS AND WITH ALL FAULTS BASIS. THE SELLER MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY AND VALUE OR CONDITION OF THE GOODS OR ITS SUITABILITY FOR ANY USE. SELLER EXPRESSLY AND SPECIFICALLY DISCLAIMS, WITH OUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNE
1 inch POWERMATIC SPINDLE SHAPER MODEL 27 5 HP
At auction: LOCAL PICK UP 1 inch POWERMATIC SPINDLE SHAPER MODEL 27 5 HP.1270112 Purchased new. Never used. Has been stored, maintained. AS PICTURED Thank You! Email me with any questions. Powered by The free listing tool. List your items fast and easy and manage your active items. Posted with
POWERMATIC 10" ARTISAN TABLE SAW - TABLESAW
THAT IS SAW DUST IN THE PICTURES. RUNS GREAT. INCLUDES BLADE. NO OTHER ACCESSORIES INCLUDED. SAW IS FOR SALE LOCALLY. RESERVE RIGHT TO CANCEL AUCTION. LOCAL PICK UP ONLY. NO RETURNS. THANKS AND GOOD LUCK.
Powermatic 12" Thickness Planer: (Inv.14810)
Powermatic 12" Thickness Planner: Model 100 SN 3-542 3 phase. Push Button control. Emergency stop. Spare blade. 480 lbs unskidded weight. Inv.14810) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international ... moremoney order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
Powermatic Model 100 Planer,12" Cap., 5HP, 220/440V, 3PH, 5" Thickness Cap.
Cleaned. Checked, Model 100, 220/440V. 3PH, 12" Cap. with 1/16" to 5" thickness opening, 5.0-HP motor- 5.300 RPM belt driven head, 3-knife cutterhead with high speed steel knives, 3-1/8" dia. head, 18 FPM fixed feed speed, Solid infeed rolls, 12" x 24" precision ground cast iron table, 1/4" max. depth of cut, 7-1/2" min. stock length(unbutted) Stock Number: J-1-042(w) Framing or crating will incur additional charges. If needed Please Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if item is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse workload ... moreand potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. PAYMENT TERMS: Full Payment or deposit required within 24 hours of order. NO EXCEPTIONS. Items not paid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost.