In 
 
Order by: 
Available to: 
Price: 
 - 
$
249.99
Buy It Now
$0 Shipping
Condition: Used
Location: Grand Rapids,MI,USA
$
249.99
Buy It Now
$0 Shipping
Condition: New
Location: Los Angeles,CA,USA
$
249.99
Buy It Now
$0 Shipping
Condition: New
Location: Los Angeles,CA,USA
$
175
Buy It Now
$5 Shipping
Condition: New – Open box
Location: Lake Zurich,IL,USA
$
699.99
Buy It Now
$0 Shipping
Condition: Used
Location: Grand Rapids,MI,USA
$
249.99
Buy It Now
$0 Shipping
Condition: New
Location: Los Angeles,CA,USA
$
298
Buy It Now
Free Shipping
Condition: New
Location: Madison Heights,MI,USA
BS-0 Precision Dividing Head. Headstock adjustable from 10 downward to 90 degree upward from the horizontal position. Including headstock. 4" 3-jaw ... morelathe chuck, tailstock, center&driving dog, threaded back plate& 3 dividing plates. 1:40 ratio. Direct index plate of 24 holes allow direct dividing in 2,3,4,6,8,12& 24. Accessory plates provide indirect dividing in any number from 2 to 50 and from 52 to 380 except prime numbers and certain other numbers. Swing: 6-1/2" Center Height: 3-15/16" Headstock Taper: 7 B&S. Weight: 60 bls.
$
58
2d 14h 40m 20s
16 bids
Free Shipping
Condition: Used
Location: Eugene,OR,USA
$
105
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Lake Zurich,IL,USA
$
249.99
Buy It Now
$0 Shipping
Condition: New
Location: Los Angeles,CA,USA
$
175
Buy It Now
$0 Shipping
Condition: Used
Location: Yorktown,VA,USA
$
170
Buy It Now
$0 Shipping
Condition: Used
Location: Lannon,WI,USA
$
380
Buy It Now
Free Shipping
Condition: Used
Location: Louisville,KY,USA
The adjustable 4" chuck was made by Buck. It is a three jaw chuck and comes with one set of jaws and adjustment tool and fits a 1 3/4" to 5" ... morethreaded spindle. This chuck was lightly used and is in perfect working order. Please ask any questions and I will answer them. Shipping will be $20 and will include insurance and signature confirmation. This chuck fits the Brown and Sharpe dividing head that I have listed in a separate auction.
$
439.99
Buy It Now
$0 Shipping
Condition: New
Location: Pittsburgh,PA,USA
$
406.28
3d 10h 27m 4s
0 bids
$37.7 Shipping
Condition: New – Open box
Location: United Kingdom
$
165
Buy It Now
$10 Shipping
Condition: New
Location: Lake Zurich,IL,USA
$
19.99
4d 16h 45m 13s
1 bids
$4.95 Shipping
Condition: Used
Location: Montgomery,IL,USA
$
295
Buy It Now
$0 Shipping
Condition: Used
Location: Lyons,IL,USA
$
425
Buy It Now
Free Shipping
Condition: Used
Location: Yorktown,VA,USA
$
376
Buy It Now
Free Shipping
Condition: New
Location: Saint Charles,IL,USA
SHARS PRECISON BS-0 SEMI UNIVERSAL DIVIDING HEAD MILLING MACHINIST SET NEW 202-2012. Style: Semi-Universal Swing: 7-7/8" Center Height: 3.937" ... moreHole Through Spindle: 0.709" Head Stock Taper: 7B&S, threads on back plate: 1-1/2" 8, Model N0. BS0 THIS MODEL CAN ONLY SUPPORT 5" CHUCKS AT THIS MOMENT. Product application Divide any angle by the direct. Indirect or differential methods Spindles with tapered roller bearings are on integral part of all diving heads, Direct mounted index plate has 24 divisions, Hardened and ground worm gear has a 40:1 ratio, Head stock swivels to all angles, Applications: A: 15-16-17-18-19-20. B: 21-2327-29-31-33, C: 37-39-41-43-47-49, All number from 1-50, All even numbers from 50-100, Many others from 50-400, Can be easily Adjusted to any angle between +10 to 90 degrees from a horizontal position, Threading back plate for mounting lathe chuck(back plate is plane back and it requires drilling& tapping 3 or 4 mounting holes depending on the lathe chuck and turning a shoulder for the recess of the lathe chuck) Center and driving dog, 3 Dividing Plates, Head Stock, Tail Stock, All Available to Ship NOW! at Fixed Prices If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone: 1-630-443-3244 Email: DISCOUNTMACHINE@AOL.COM PAYMENT: We accept VISA. MasterCard and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools. Feel free to email us at DISCOUNTMACHINE@AOL.COM
$
265.62
Buy It Now
$0 Shipping
Condition: New
Location: Los Angeles,CA,USA
$
265.62
Buy It Now
$0 Shipping
Condition: New
Location: Los Angeles,CA,USA
$
369.99
Buy It Now
$0 Shipping
Condition: New
Location: Pittsburgh,PA,USA
$
491.97
Buy It Now
$0 Shipping
Condition: New
Location: Rancho Cucamonga,CA,USA
$
459
Buy It Now
Free Shipping
Condition: New
Location: Madison Heights,MI,USA
BS-1 Precision Dividing Head. Headstock adjustable from 10 downward to 90 degree upward from the horizontal position. Including headstock. 6" 3-jaw ... morelathe chuck, tailstock, center&driving dog, threaded back plate& 3 dividing plates. 1:40 ratio. Direct index plate of 24 holes allow direct dividing in 2,3,4,6,8,12& 24. Accessory plates provide indirect dividing in any number from 2 to 50 and from 52 to 380 except prime numbers and certain other numbers. Swing: 9" Center Height: 5-3/64" Headstock Taper: 9 B&S. Weight: 110 bls.
$
279
Buy It Now
$0 Shipping
Condition: New
Location: Norcross,GA,USA
THIS TOOL IS IN EXCELLANT COND. LW CHUCK UNIVERSAL DIVIDING HEAD. WITH UNIVERSAL ADJUSTABLE TAILSTOCK. IT HAS A 6" 3-JAW CHUCK. WITH PLATES. THE ... moreHOLE THRU IS 7/8" THE HT. IS 9" HIGHEST POINT. BOTTOM HAS BRIDGEPORT LOCATING DOGS ON THE DIVIDER AND TAILSTOCK. THIS HAS SEEN VERY LITTLE USE, SHIPS FREE. PAY WITHIN 3 DAYS. HAVE? CALL DENNIS 401 539-2857
$
225
Buy It Now
$0 Shipping
Condition: Used
Location: Yorktown,VA,USA
$
540
Buy It Now
$150 Shipping
Condition: Used
Location: Unionville,CT,USA
We Have 1.000's of New And Used MetalWorking Machines And Tooling! If You Have Any Questions Or Are Looking For Something Particular Call Us@ 909.919.9600! ... moreNL Make: L-W Chuck Co. Dividing Head) Herter(Chuck) Country of Origin: United States& Japan Condition: Great Specifications: Through Hole: 1-5/64" Includes 15- 20 Dividing Plate. Chuck Diameter: 6-1/2" Chuck Width: 3" Chuck Center Hole: 1-23/32" Base Dimensions: 7" x 8" Mounting Slots: 3/4" Overall Dimensions: 12" x 13" x 12" Includes Chuck Key. Comes as shown in pictures. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive a 30% discount per item. This Only Applies To Tooling Items with a Total Gross Weight of Under 100 Lbs. Machines are Not Included in this Offer. This Will be Final on All Transactions Unless Prior Arrangements are Agreed Upon Before The End Of The Auction. Notice! After purchasing and collecting your item. We would appreciate your feedback. If you could please leave a 5 star rating in all four of the applicable categories, it would be greatly appreciated. If you have any problems or issues, please contact us prior to leaving any feedback. We strive to provide the best service we can, and understand that mistakes are made in some cases. In the case of these mistakes, we will do whatever is necessary to rectify the situation. Furthermore, because of issues with past customers, we mark all our items to prevent any dishonest eBayer from trying to exchange our item with their old/non-working item. This type of behavior is unacceptable, and action will be taken against these buyers through eBay's policies by reporting them to eBay immediately. Here at MachineStation, we realize most people are honest, and do not practice techniques mentioned above. By the same token we are commi
$
265.62
Buy It Now
$0 Shipping
Condition: New
Location: Los Angeles,CA,USA
$
249.99
Buy It Now
$0 Shipping
Condition: Used
Location: Yorktown,VA,USA
$
1,875
Buy It Now
Free Shipping
Condition: Used
Location: Highland,NY,USA
$
548.99
Buy It Now
$0 Shipping
Condition: New
Location: Los Angeles,CA,USA
$
400
Buy It Now
$30 Shipping
Condition: Used
Location: El Monte,CA,USA
$
850
Buy It Now
Free Shipping
Condition: Used
Location: Oxford,PA,USA
$
839.95
Buy It Now
Free Shipping
Condition: New
Location: Saint Charles,IL,USA
SHARS BS2 UNIVERSAL INDEXING DIVIDING HEAD& EXTRAS NEW SHIPPING METHOD: Truck We can combine other auctions or store items to save on shipping. You ... moremay ask for freight cost before buying tools. Shipment will be made the same day or next day as your payment is received. Please email or call us to get the shipping quote before you pay. No free shipping. Local pick up available. 202-2014. Style: Universal, Swing: 10-1/2" Center Height: 5.24" Hole Through Spindle: 0.985" Head Stock Taper: 10B&S, Model No. BS2 threads on back plate: 2-1/4" 8, Concentricity: 0006" center; 0004" inside taper at spindle nose; 0012" at arbor(8" For indexing and spiral cutting. Divide any angle by the direct, indirect or differential methods Chuck sold separately Use for easy indexing of divisions from 2 to 50 and most numbers from 52 to 380, Features spiral machining capability, Convenient swivel head locks at any angle from 10 below horizontal to 90 vertical, Dividing head allows you to divide in any angle by the direct. Indirect or differential method, Hardened and ground spindle is rigidly held in a tapered seat by a draw-in nutApplications: A: 15-16-17-18-19-20. B: 21-2327-29-31-33, C: 37-39-41-43-47-49, Hardened and ground worm provides easy adjustment of worm gear and disengages for direct indexing, Ratio between worm and worm gear is 40:1, Features threaded spindle nose and 24 hole dividing plate with easy conversion to fast. Direct indexing on numbers 2, 3, 4, 6, 8, 12 and 24, Threading back plate for mounting chuck(back plate is plane back and it requires drilling& tapping 3 or 4 mounting holes depending on the lathe chuck and turning a shoulder for the recess of the lathe chuck) Center and driving dog, 3 dividing plates, Head stock, Tail stock, Full set of 12 gears for spiral cutting, We also have chuck available in our eBay store. Click the link to the item page: Order# 202-5412 8" 3 JAW LATHE CHUCK SELF CENTERING HARDENED FOR ATLAS All Available to Ship NOW! at Fixed Pri
$
399.77
Buy It Now
$0 Shipping
Condition: New
Location: Monrovia,CA,USA
$
548.88
Buy It Now
$0 Shipping
Condition: New
Location: Rosemead,CA,USA
$
265.62
Buy It Now
$0 Shipping
Condition: New
Location: Los Angeles,CA,USA
$
500
Buy It Now
Free Shipping
Condition: Used
Location: Holland,OH,USA
$
2,250
Buy It Now
Free Shipping
Condition: Used
Location: Yorktown,VA,USA
$
440
Buy It Now
Free Shipping
Condition: New
Location: Miami,FL,USA
$
300
Buy It Now
$0 Shipping
Condition: Used
Location: Berrien Springs,MI,USA
$
535
Buy It Now
$0 Shipping
Condition: New
Location: Tampa,FL,USA
$
700
Buy It Now
$0 Shipping
Condition: Used
Location: Sidney,OH,USA
Description | Payments | Shipping | Feedback | Disclaimer | Links | Bidding You're Bidding On Manufacturer: L-W Model Number: Description: L-W Indexing ... moreIndexer Fixture Dividing Head. Chuck, Tail Stock No. 3 Morse Taper With 1-1/2"8 Threaded Spindle. Comes With No. 3 MT Dead Center 5" L-W 3 Jaw Universal Chuck With Key and 1/4" Hex Key. Everything Shown. Nothing more. Has 5/8" Wide Keys on the Bottom of Head& Tail Stock. Item Condition: Very Good Working Order Size: Additional Information We Combine Shipping On Multiple Items To Save You Money. If you're buying multiple items please wait for an invoice before paying. The shipping calculator doesn't work well on combining shipping. We Combine Shipping On Multiple Item Purchases To Save You Money PAYMENT METHODS ACCEPTED Visa. MasterCard, Discover, American Express And eChecks Via PayPal. Ohio Residents Must Pay 7% Sales Tax Payment must be received within three days. Back To Description SHIPPING INFORMATION After winning an auction. Please use the"PAY NOW" button, this will take you to the Checkout page where you can complete the transaction. If you won multiple items. Please wait for us to send an invoice with the Combined Total. Plus Shipping. However there may be cases when the items can't be combined due to excessive weight or heavy& fragile items together. If so. I'll notify you by email. As a rule. Items are normally shipped the next business day after payment is cleared. You will receive an email notice with a tracking number when your item has shipped. Note! All shipments are with Delivery Confirmation or Tracking Number. Back To Description FEEDBACK It is our policy to always leave an automatic positive feedback once your payment is received and cleared. Please do the same for us once you receive your item. If there is a problem with your item. Please contact us immediately. We always do our best to resolve any problems. A Note About DSR's. Or Detailed Seller Ratings Item as
$
1,875
Buy It Now
Free Shipping
Condition: Used
Location: Highland,NY,USA
$
1,300
Buy It Now
Free Shipping
Condition: Used
Location: Oregon,OH,USA
$
949.95
Buy It Now
$0 Shipping
Condition: Used
Location: Chicago,IL,USA
Normal 0 false false false MicrosoftInternetExplorer4 LW Chuck Dividing Head with Tailstock& Extra Plates& Cushman 6” Chuck. Cleaned and lubricated. ... moreReady to use. Perfect size for smaller milling machines such as Emco. Clausing Millrite, Rockwell, and other small to medium sized mills. Spindle thread is 1 ½”8 tpi. The same as the South Bend 9” and 10K lathes as well as many others. The 3 dividing plates are; 1) 15. 16, 17, 18, 19, and 20 divisions. 2) 21. 23, 27, 29, 31, and 33 divisions. 3) 37. 39, 41, 43, 47, and 49 divisions.
$
989
Buy It Now
$0 Shipping
Condition: Used
Location: Menomonee Falls,WI,USA
$
650
Buy It Now
$0 Shipping
Condition: Used
Location: Hammonton,NJ,USA
$
399.99
Buy It Now
Free Shipping
Condition: Used
Location: Yorktown,VA,USA
$
478.95
Buy It Now
$0 Shipping
Condition: New
Location: Rancho Cucamonga,CA,USA
$
416.95
Buy It Now
$0 Shipping
Condition: New
Location: Bellingham,WA,USA
$
595
Buy It Now
$0 Shipping
Condition: Used
Location: Brooklyn,NY,USA
$
3,275
Buy It Now
Free Shipping
Condition: Used
Location: Highland,NY,USA
$
250
Buy It Now
Free Shipping
Condition: Used
Location: Fairfield,IA,USA
$
1,195
Buy It Now
Free Shipping
Condition: Used
Location: Mountainair,NM,USA
$
2,495
Buy It Now
Free Shipping
Condition: Used
Location: Farmingdale,NJ,USA
$
637.5
Buy It Now
$0 Shipping
Condition: Used
Location: Sylva,NC,USA
$
1,448.95
Buy It Now
Free Shipping
Condition: New
Location: Chino,CA,USA
$
479.99
Buy It Now
Free Shipping
Condition: Used
Location: Bremen,IN,USA
1 2 3 4 5 6 7 8 9 10
 In 

Past Items  
 
aims CLEAN! KEARNEY& TRECKER DIVIDING HEAD w/ 5C NOSEPIECE& TAILSTOCK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Kearney& Trecker Corp. This is a Dividing Head with 5C Nosepiece& Tailstock in EXCELLENT condition. Serial# 16/6895 This item is currently coming out of a shop that is recently closing down. All of their equipment is in top notch condition. And this item is no exception. Every piece of equipment at this shop was meticulously maintained. The photos really speak for themselves. Please check our other listings for a large variety of equipment from this same shop. We here at Reliable Tools strive to provide you with quality equipment, at a fraction of the cost. So act fast because a deal like this won't last long. Features: Designed ... moreto render accurate and efficient service and to satisfy all the requirements demanded by the average machine shop. Converts any ordinary milling machine or tool grinder into a universal machine. With the dividing head. Any double angle drilling or grinding operation will equal many rotary table jobs. Fitted with a 5C Nosepiece& Drawbar. Includes a Tailstock with a 5" Center Height. Specifications: Base to Nosepiece Center: 5" Swing: 10" Spindle Taper: 40. Ratio: 40:1. Thru Hole: 1-1/2" Nosepiece Taper: 5C. Tailstock Center Height: 5" Overall Dimensions: 17" x 20" x 13" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CLEAN! KEARNEY& TRECKER DIVIDING HEAD w/ 5C NOSEPIECE& TAILSTOCK CLEAN! KEARNEY& TRECKER DIVIDING HEAD w/ 5C NOSEPIECE& TAILSTOCK CLEAN! KEARNEY& TRECKER DIVIDING HEAD w/ 5C NOSEPIECE& TAILSTOCK CLEAN! KEARNEY& TRECKER DIVIDING H
AGATHON SWISS SMALL DIVIDING HEAD- NEW- INVENTORY#4451 A very small NEW Swiss built dividing head applicable as described below(see specs)
good used dividing head set The Pratt& Whitney Co"makers" approx 3 1/8" center height x 13" centers base is 3" wide x 23 3/4" long please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
Up for auction one Brown and Sharpe Universal Dividing Head with matching tailstock. The dividing head is marked"Brown and Sharpe MFG. CO. Providence R. I. U.S.A. and the serial number is"1928" The dividing head specifications are as follows. 3 1/4" Radius and 6 1/2" Swing, 1 plate W-33-31-29 27-23-21 divisions. The tailstock is serial number"1929" This tooling set was lightly used and is in perfect working order. Please ask any questions and I will answer them. Shipping is going to cost $25-$35 and will include insurance and signature confirmation.
The adjustable 4" chuck was made by Buck. It is a three jaw chuck and comes with one set of jaws and adjustment tool and fits a 1 3/4" to 5" threaded spindle. This chuck was lightly used and is in perfect working order. Please ask any questions and I will answer them. Shipping will be $20 and will include insurance and signature confirmation. This chuck fits the Brown and Sharpe dividing head that I have listed in a separate auction.
THIS TOOL IS IN EXCELLANT COND. LW CHUCK UNIVERSAL DIVIDING HEAD. WITH UNIVERSAL ADJUSTABLE TAILSTOCK. IT HAS A 6" 3-JAW CHUCK. WITH PLATES. THE HOLE THRU IS 7/8" THE HT. IS 9" HIGHEST POINT. BOTTOM HAS BRIDGEPORT LOCATING DOGS ON THE DIVIDER AND TAILSTOCK. THIS HAS SEEN VERY LITTLE USE, SHIPS FREE. PAY WITHIN 3 DAYS. HAVE? CALL DENNIS 401 539-2857
This is a dividing head plate that is in very nice shape. Divisions are 49.47,43,41,39& 37/ 5 7/8" dia, 1 1/8" center hole as measured with a steel tape& 1/4" thick. Cust. pays $6.00 S&H, USA. USA only, Paypal only. Any questions email& I'll try to help, Randy
news dividing head made by Yuasa.Great condition.missing the wavy clip to hold the brass stop legs on(pic 3)im not sure what the 2 homemade parts are but they came with it.no international ka.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%60wk6%3Eka-13e12a4c4f8-0xf3-
aims NICE! WALTER#HU-100 INDEXING DIVIDING HEAD w/ NOSEPIECE& ACCESSORIES read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Germany by Walter. This is an Indexing Dividing Head with Spring"F" Collet Nosepiece. Tailstock& Indexing Plates in good condition. Please note that part of the adjustment knob on the tailstock is broken. See pictures for detail. Model# HU-100 Serial# 2916 Features: Designed to render accurate and efficient service and to satisfy all the requirements demanded by the average machine shop. Can easily adjust to any angle between-20 deg. to +20 deg. from a horizontal position. Divide any angle by the direct. Indirect or differential methods. Converts any ordinary milling machine or tool grinder into a universal machine. Hardened and ground worm ... moregear has a 40:1 gear ratio. With the dividing head. Any double angle drilling or grinding operation will equal many rotary table jobs. Tailstock. Indexing Plates. Specifications: Nose Piece: F" Spring Collet. Head Swing: 20 degrees below the centerline/ 20 degrees beyond vertical. Center Height: 3-3/4" Thru Hole: 11/16" Ratio: 40:1. Tailstock Center Height: 4" Overall Dimensions: 14-1/2" x 11" x 7" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! WALTER#HU-100 INDEXING DIVIDING HEAD w/ NOSEPIECE& ACCESSORIES NICE! WALTER#HU-100 INDEXING DIVIDING HEAD w/ NOSEPIECE& ACCESSORIES NICE! WALTER#HU-100 INDEXING DIVIDING HEAD w/ NOSEPIECE& ACCESSORIES NICE! WALTER#HU-100 INDEXING DIVIDING HEAD w/ NOSEPIECE& ACCESSORIES NICE! WALTER#HU-100 INDEXING DIVIDING HEAD w/ NOSEPIECE& ACCESSORIES NICE! WALTER#HU-100 INDEXING DIVIDING HEAD w/ NOSEPIECE& ACCESSORIES NI
Up for sale is a Kearney Trecker dividing head with whiton 6" od 3 jaw chuck. Item is in good usable condition. Item weight is 110 pounds. 4835 Big Daddys vintage tools is a small individually ran company located in Baldwinville Massachusetts. I mostly sell vintage machine parts but you will also find various other items. I am a part time seller and sell from a store rather than auctions. I find it easier to manage store selling than bulk auctions. Starting in June 2012 I will be dropped from some searches. So please if you like what I sell save me in your favorites. I can not offer one day shipping or 14 day free return shipping. I sell vintage machine parts and various other items purchased at auctions.Estate sales and yard sales. I do my best to tell the truth and honor my mistakes. There have been no items were I refused a full refund ... moreincluding return shipping when I have made a mistake. I find most all buyers just want what they bought. But for what I sell I am going to continue with my policy of 5 days. That is please contact me if there is a problem within 5 days. I give some slack because if you get a item on a Monday you might not get a chance to really check it out until Saturday if your working. Please then contact me so we can resolve the issue. Shipping please read: Shipping is a necessary evil nobody likes to pay it. However it is necessary and for what I sell. I must charge shipping! I try to keep the cost down and do not charge a packaging fee. Some time back the host started charging a finale value fee on shipping. This means they collect a percentage of the shipping cost besides the standard item cost. On a smaller USPS Priority mail item the cost is really not effected, any difference I absorb as the seller. However on larger items shipped UPS Ground or trucking, I must add weight or adjust to reflect the percentage the host takes. For ex sample if I'm sending a 100 pound item from Massachusetts to Oregon via UPS Ground I would be paying 10 dollars towards shipping. Heavier trucked ite
nice precision dividing head
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ spindle is 1 1/4" x 8 tpi heavy/clean unsure make/appears very good quality very good condition has#2 morse taper written on with marker Please view pictures for exact ... moredetails on item for tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you! di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13e52e2ff57-0xf7-
Vintage Instruction Operators Book 1940 for Universal Dividing Head and Accessory Equitment Posted with
Dividing head. Kempsmith maker. Heavy duty, cast iron. Tailstock included. 12" faceplate. Used but in prefect working order. Very handy unit and a fraction of the price of a new one. Not to mention it was made in the good old U.S.A. With superior manufacturing and materials, not a questionable unit from overseas. A great item! Its sure to pay for itself! Please feel free to ask any questions. For questions on shipping please message me with where you would have it delivered and I can figure that out for you. I can also arrange delivery in northern Oregon and southern Washington. Thanks for looking! Note: it says local pickup only but I'd be happy to ship if you are willing to cover the cost. I'd estimate it being at least 120 lbs. we would just have to figure it out after the auction.
good used index plate Bridgeport USA# 4 approx 5 1/2" dia x 1 1/8" hole 59. 46, 38, 32 and 26 holes will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
good used index plate Bridgeport USA# 2 approx 5 1/2" dia x 1 1/8" hole 49. 43, 35, 29 and 10 holes will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13e62dd72b5-0xf9-
good used sector arms brass with approx 1 1/8" hole will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $11.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13e63968881-0xfd-
aims IMMACULATE! ELLIS INDEXING DIVIDING HEAD w/ 5C NOSEPIECE + PLATES read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in U.S.A by Ellis. This is a Precision Dividing Head with 5c Nosepiece& Plates in EXCELLENT condition. Model# E 617. Features: Designed to render accurate and efficient service and to satisfy all the requirements demanded by the average machine shop. Converts any ordinary milling machine or tool grinder into a universal machine. With the dividing head. Any double angle drilling or grinding operation will equal many rotary table jobs. Has adjustable worm. Accurately cut bronze worm-wheel. Embodies 40:1 ratio crank indexing dividing head. Can easily adjust to any angle between-90 deg. to +90 deg. from a horizontal position. Specifications: Hole through Spindle: ... more15/16" Spindle Taper: 5MT. Spindle Nose: 5C. Crank Indexing Ratio: 40:1. Divisions: Up to 400. Base to Chuck Center: 5-1/2" Chuck Thickness: 2-1/2" Chuck center bore through hole: 1-3/8" Overall Dimensions: 13" x 11" x 9" tall. Comes as shown in pictures. Reliable Tool currently has a large selection of products listed. Please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. IMMACULATE! ELLIS INDEXING DIVIDING HEAD w/ 5C NOSEPIECE + PLATES IMMACULATE! ELLIS INDEXING DIVIDING HEAD w/ 5C NOSEPIECE + PLATES IMMACULATE! ELLIS INDEXING DIVIDING HEAD w/ 5C NOSEPIECE + PLATES IMMACULATE! ELLIS INDEXING DIVIDING HEAD w/ 5C NOSEPIECE + PLATES IMMACULATE! ELLIS INDEXING DIVIDING HEAD w/ 5C NOSEPIECE + PLATES Reliable Tool Inc. c 2011 | Powered by
For Sale: Dividing head tailstock Buyer note: Adjustment needs loosening 9" long 7" high 26 lbs Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed ... moreto have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to Contact me personally at(815) 299-7625 Monday through Friday between 11:00am and 7:00 CST. I can also be reached by e-mail. I will answer your e-mails
Cozfly Template Revision#2 SCHAUBLIN SV 13 MILLING MACHINE DIVIDING HEAD W/ TAILSTOCK Description, Up for bids is this Schaublin SV 13 milling machine dividing head with tailstock. The dividing head is W-20 and comes with a collet closer. Both pieces are in excellent condition and I would rate them barely used if at all. Unfortunately there is some paint loss. Marked Schaublin as you see in the pics. Surely these are two pieces that don’t come along very often. The plate pictured is the only one I have.Combined these pieces weigh in at about 44 pounds so please disregard the ebay shipping charges and contact me with your location for a shipping quote. Please be sure to check out my other Schaublin lathe and Schaublin mill/ milling machine auctions. I will be happy to send more pics if needed. Feel free to with any questions. Thanks for looking ... moreand good luck bidding. To view my other auctions. COZFLY AUCTIONS, Payment& Shipping, PAY-PAL& Personal Checks Accepted. Payment is expected within 7 days of auction end. If a payment is not received within 7 days of auction end the buyer forfeits the item. U.S.bidders pay an amount to be determined after auction end for shipping via USPS Ground insured. International bidders pay actual USPS insured shipping charges and a $25.00 handling fee.
good used dividing head The Garvin Machine Co. New York USA approx 5" center height 10 B&S taper in spindle please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
Adjustable Tailstock Holder Note: It matches the look of a Bridg eport tailstock holder. But there is no stamp on the item PAYMENT: Paypal payment is due immediately for“Buy-it-now” listings and within 2 days for auction listings. If payment is not received within the specified time. We reserve the right sell the item to a different buyer. Any bid or purchase made without payment will be noted by eBay. SHIPPING: Shipping Address: According to Ebay/Paypal policies. We are required to ship ONLY to the address in either your Ebay(default shipping address) or Paypal account. The request for shipping to a different address cannot be honored as it disallowed according to Ebay/Paypal policies. International Shipping: Import duties. Taxes, and surcharges are not included in the item price or shipping charges and are the buyer’s responsibility unless ... moreit is purchased through the Global Shipping Program. Please check with your country’s customs office to determine what these additional costs will be if you are concerned. ABOUT US: We are not affiliated with the brand names being sold. And brands mentioned are for identification purposes only. TERMS OF SALE: Items for sale are in working condition unless otherwise specified. The item(s) in the photos are the actual item(s) for sale. And it is exactly what you will receive. Only the item(s) shown in the photos are included. Items in the photo(s) will supersede the written description should there is any discrepancy due to inadvertent description error. Please see all photos for details and condition. If an item is used. Please note that it will have the expected wear when purchasing used goods. All measurements are approximates. Items are sold in“as is” condition; and returns are not accepted, unless a serious and gross error was made in the listing. Local Pick-Up Option: If the listing specifies local pickup. Then the buyer is responsible for arranging the item pickup within a week of the item selling date. The buyer can pickup the item himself/herself or make arrang
aims JAPAN! TABATA 10" INDEXING DIVIDING HEAD w/ PLATES read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Japan by Tabata Works Co. Ltd. This is an Indexing Dividing Head& Plates in GREAT condition. Serial# 10445 Specifications: Swing: 10" Center Height: 5" Spindle Thread: 1-1/2" 8 tpi. Thru Hole Diameter: 3/4" Taper of Center: 9 B&S. Tilt Range: 10- 0- 100 degrees. Ratio: 40:1. Overall Dimensions: 8" x 11" x 10" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. JAPAN! ... moreTABATA 10" INDEXING DIVIDING HEAD w/ PLATES JAPAN! TABATA 10" INDEXING DIVIDING HEAD w/ PLATES JAPAN! TABATA 10" INDEXING DIVIDING HEAD w/ PLATES JAPAN! TABATA 10" INDEXING DIVIDING HEAD w/ PLATES JAPAN! TABATA 10" INDEXING DIVIDING HEAD w/ PLATES JAPAN! TABATA 10" INDEXING DIVIDING HEAD w/ PLATES JAPAN! TABATA 10" INDEXING DIVIDING HEAD w/ PLATES Reliable Tool Inc. c 2011 | Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13e6bf2ccca-0xfe-
6" L-W 4-JAW LATHE CHUCK 1-1/2" THRU HOLE FLAT BACK Chuck is in good used condition and comes as pictured. Payment due within seven days of purchase. Check. M/o, and PayPal accepted. $11.50 for USPS Priority Mail shipping. Thanks for looking!
Gearbox for Schaublin 13 dividing head.Looks unused,CA tax forCA res Posted with f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13e6d46bb50-0x105-
Probably Import Probably Never Used For Standard Thickness Rules. ```````````````````````````````````````````````````````````````````````````````````````````````````````` Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and ... moretacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5
No clamp. Looks never used. Cheap Shipping on all smalls + no bs combining.bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ... moreship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cram it all into one flat rate 5.00 envelope. I am not a for profit shipper(small club around here!I just want to clear out all of this stuff# REAL COST NON ABUSIVE SHIPPING-NO"I FEEL LIKE AN IDIOT TO PAY THAT MUCH SHIPPING" Nice stuff Combine! and no ridiculous added fee for handling extra items or similar scams! NOTE SHIPPING COST + COMPARE TO OTHERS-WHY GET BONED? COMBINE SHIPPING-ALL SHIPPING IS AT REAL COST-I DO NOT MAKE MONEY ON SHIPPING(AM I THE ONLY PERSON ON EBAY THAT DOESN'T?
Please Note that the indexing pin in the socond picture of this is broken and needs fixing. 10" Swing Van Norman Dividing head With Tailstock Please visit the folling link for larger pictures and a few extra shots. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after ... morethe close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please s
This auction is for a good used tailstock. 4" ADJUSTABLE TAILSTOCK CENTER DIVIDING HEAD TAIL STOCK for ROTARY TABLE MILL 4" height. Approx. 5/8" travel. In good working condition. Works smoothly paint shows some wear
This indexing head came with a Cincinnati#2 mill that I just bought. It was being used to cut transmission gears for some kind of vintage car. I already have an indexer so this ones for sale, although I think this ones nicer than the one I already had. I think this is an Ellis brand, but I cant find a name on it. The head is nice and tight with no slop at all, it comes with the tailstock and 3 plates total. The center of the spindle is 3-1/2" above the table. The locators on the bottom of the head and tailstock are for the 5/8" slots on a larger mill. You would have to change them back to 1/2" if you want to use this on a Bridgeport or smaller mill. This just feels like a good quality tool. Let me know if you have any questions, Thanks.
DIVIDING HEAD AS PICTURED.I KNOW IT WAS PURCHASED FROM MSC ABOUT 20 YEARS AGO
aims ELLIS PRECISION DIVIDING HEAD w/ BUCK 6" THREE-JAW CHUCK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in U.S.A by Ellis. This is a Precision Dividing Head with Buck 6" Adjust-TruThree-Jaw Chuck in good condition. Features: Unit is fitted with a Buck 6" Three-jaw Adjust-Tru Lathe chuck. Designed to render accurate and efficient service and to satisfy all the requirements demanded by the average machine shop. Converts any ordinary milling ... moremachine or tool grinder into a universal machine. With the dividing head. Any double angle drilling or grinding operation will equal many rotary table jobs. Has adjustable worm. Accurately cut bronze worm-wheel. Embodies 40:1 ratio crank indexing dividing head. Can easily adjust to any angle between-90 deg. to +90 deg. from a horizontal position. Specifications: Swing: 6-1/2" Hole through Spindle: 15/16" Spindle Nose Thread: 1-3/4"8. Crank Indexing Ratio: 40:1. Divisions: Up to 400. Base to Chuck Center: 5-1/2" Chuck Diameter: 6" Chuck Thickness: 3" Chuck center bore through hole: 1-1/2" Overall Dimensions: 10" x 9" x 10" tall. Comes as shown in pictures. Reliable Tool currently has a large selection of products listed. Please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ELLIS PRECISION DIVIDING HEAD w/ BUCK 6" THREE-JAW CHUCK ELLIS PRECISION DIVIDING HEAD w/ BUCK 6" THREE-JAW CHUCK ELLIS PRECISION DIVIDING HEAD w/ BUCK 6" THREE-JAW CHUCK ELLIS PRECISION DIVIDING HEAD w/ BUCK 6" THREE-JAW CHUCK ELLIS PRECISION DIVIDING HE
Dividing Head Index Plate 6.25" Dia OD 24-25-26-28-32-34-38-44-46. Click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge Description Auction is for a Dividing Plate Index. 24 25 26 28 32 34 38 44 46. It measures 6.25" in diameter. I am unsure of the maker. It has very slight surface oxidation in some of the holes. It is in otherwise very good condition. for more great items! Payment We accept PAYPAL payments. Please make payments within 36 hours of purchase. Shipping We ship within 48 business hours of cleared payment. We will combine shipping whenever possible with no handling charges. Thanks for looking. Have a great day! txzj pxzj229 txzj-4 txzj1
aims PRECISION DIVIDING HEAD w/ CRAFTSMAN 4" 4-JAW CHUCK W/ TAIL STOCK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in U.S.A by Ellis. This is a Precision Dividing Head with 4" 4-Jaw Chuck in good condition. Features: Unit is fitted with a Craftsman 4" 4-jaw Adjust chuck. Designed to render accurate and efficient service and to satisfy all the requirements demanded by the average machine shop. Converts any ordinary milling machine or tool ... moregrinder into a universal machine. With the dividing head. Any double angle drilling or grinding operation will equal many rotary table jobs. Has adjustable worm. Accurately cut bronze worm-wheel. Can easily adjust to any angle between-90 deg. to +90 deg. from a horizontal position. Specifications: Base to Chuck Center: 4-1/2" Chuck Diameter: 4" Chuck Thickness: 2" Chuck center bore through hole: 3/4" Overall Dimensions: 10" x 9" x 10" tall. Comes as shown in pictures. Reliable Tool currently has a large selection of products listed. Please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PRECISION DIVIDING HEAD w/ CRAFTSMAN 4" 4-JAW CHUCK W/ TAIL STOCK PRECISION DIVIDING HEAD w/ CRAFTSMAN 4" 4-JAW CHUCK W/ TAIL STOCK PRECISION DIVIDING HEAD w/ CRAFTSMAN 4" 4-JAW CHUCK W/ TAIL STOCK PRECISION DIVIDING HEAD w/ CRAFTSMAN 4" 4-JAW CHUCK W/ TAIL STOCK PRECISION DIVIDING HEAD w/ CRAFTSMAN 4" 4-JAW CHUCK W/ TAIL STOCK Reliable Tool Inc. c 2011 | Powered by
5 DAY AUCTION! VINTAGE K&T DIVI DING HEADS BROCHURE S 2 PCS 1945 BROCHURE MODEL#K UNIVERSAL SPIRAL DIV HEAD 12 PGS 1947 BROCHURE MODEL#H UNIVERSAL DIV HEAD 4 PGS YOU ARE BIDDING ON ORIGINAL LITERATURE UNLESS OTHERWISE STATED S&H IS $6.50 USPS PRIORITY MAIL. EACH ITEM IS SAFELY PACKED WITH CARDBOARD INSERT ALL INVOICES MUST BE PAID WITHIN 3 BUSINESS DAYS IF YOU HAVE ANY QUESTIONS REGARDING PAYMENT PLEASE EMAIL ME PLEASE DO NOT ASK TO BUY A PHOTOCOPY DURING OR AFTER AUCTION. COPIES ARE NOT AVAILABLE I DO SEND 2ND CHANCE OFFERS ON OCCASION IF I HAVE DUPLICATES. EMAIL ME TO VERIFY I SENT IT IF YOU'RE NOT SURE IT CAME FROM ME. IF YOU DON'T WANT TO RECEIVE 2ND CHANCE OFFERS YOU MIGHT WANT TO USE THE EBAY FEATURE THAT WILL ALLOW YOU TO'OPT-OUT' OF RECEIVING 2ND CHANCES FROM SELLERS. BUYER CAN COMBINE SHIPPING ON MULTIPLE ... morePURCHASES. IF YOU BUY 1 COST IS $6.50. IF YOU BUY MULTIPLE ITEMS COST WILL STILL BE ONLY $6.50 TOTAL. SHIPPING COSTS ONLY INCREASE ON MULTIPLE PURCHASES IF YOUR ORDER CAN'T FIT IN A PRIORITY MAILER AND HAS TO BE PACKED OTHERWISE. SHIPPING& HANDLING CHARGES ARE NOT NEGOTIABLE. EVERYBODY PAYS THE SAME. 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13eaa4da6c9-0xfb-
Victoria 3.1/2" Centre Height Dividing Head for Milling Machine. Rusty, As Photo Since taking the original photo we have now found the tailstock. Centre, chuck and some gears, all are a bit rusty but will clean up with some work. The chuck is a 3 jaw Crown chuck not wonderful but it fits. Rare small size but incomplete. Part of our ongoing stores clear out of usefull items which may be rusty. Need cleaning. incomplete etc. Carriage charge is for mainland UK. If you live in the Highlands or Islands please enquire before purchase. Collection from our premises can be arranged also. Will post abroad but shipping will be expensive.
good used index plate approx 5 1/2" dia x 1 1/8" hole 61 holes will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
good used crank arm& spring loaded pin mfg unknown will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
BRIDGEPORT#4 INDEXING PLATE. This plate has 5 rows of holes. Starting from the outer row in the hole count is: 59- 46- 38- 32- 26. The OD of the plate is 5.5 inches. The center hole has a diameter of 1.25 inches. The mounting hole centerline is 2.25 inches. Any questions or comments please email me early. No international sales. We ship to U.S.A. addresses only. We will gladly combine items to save shipping expense. Powered by The free listing tool. List your items fast and easy and manage your active items.
Here is a set of 2 INDEX PLATES for a DIVIDING HEAD in clean original condition. Index numbers 15-20 and 37-49. Plate is 6"dia. with a 1- 1-3/4" center hole with a 3 screw mount and an index pin hole. In excellent condition. Shipping flat-rate to the lower 48 is $13 all others must contact seller for actual cost.
Up for auction is a nice vintage small Starrett combo square. The scale is 6 inches long and has 8th& 16th graduations on one side and 32nd& 64ths on the other. Both the dividing head and right angle head function great and the angle head still has the bubble in the level. Overall condition is very good with just a few areas of very minor surface rust and a few spots of red dykem. Please ask any questions before bidding.
aims ELLIS PRECISION INDEXING DIVIDING HEAD w/ 5C NOSEPIECE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in U.S.A by Ellis. This is a Precision Dividing Head with 5c Nosepiece in good condition. Model# E 617. Features: Designed to render accurate and efficient service and to satisfy all the requirements demanded by the average machine shop. Converts any ordinary milling machine or tool grinder into a universal machine. With the dividing head. Any double ... moreangle drilling or grinding operation will equal many rotary table jobs. Has adjustable worm. Accurately cut bronze worm-wheel. Embodies 40:1 ratio crank indexing dividing head. Can easily adjust to any angle between-90 deg. to +90 deg. from a horizontal position. Specifications: Hole through Spindle: 15/16" Spindle Taper: 5MT. Spindle Nose: 5C. Crank Indexing Ratio: 40:1. Divisions: Up to 400. Base to Center: 5-1/2" Overall Dimensions: 13" x 11" x 9" tall. Comes as shown in pictures. Reliable Tool currently has a large selection of products listed. Please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ELLIS PRECISION INDEXING DIVIDING HEAD w/ 5C NOSEPIECE ELLIS PRECISION INDEXING DIVIDING HEAD w/ 5C NOSEPIECE ELLIS PRECISION INDEXING DIVIDING HEAD w/ 5C NOSEPIECE ELLIS PRECISION INDEXING DIVIDING HEAD w/ 5C NOSEPIECE Reliable Tool Inc. c 2011 | Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13eb75dcf79-0x103-
Model 30ahc 3 Jaw lathe chuck with key. very good used condition For hardinge hlv or 5v59 lathes with taper mount back. will also fit dividing heads. free shipping lower 48 states
Nice Schaublin tailstock for a milling index or dividing head. Hard to find and nice! Payment must be received in 7 business days or item will be relisted. International bidders must pay by PayPal in US Dollars. SHIPPING: Flat Rate Insured Shipping is for continental(lower 48) USA delivery only. I nternational deliveries by USPS Priority Mail.
Master Mill Portable machining Grinder. Indexing, milling, Slotting Well if you are looking for a Portable Master Milling machine. As you may know these are used for much more than just milling. This unit has a bunch of extra's in it. Thank you for your Business! Shipping will be 270.00! God Bless!
System 3r Dividing 20mm Head Superior condition and guaranteed for 120 days Used Manufacturer: System 3R Part number: 3R-321.45 Double hydraulic locking with 3 axis adjustments See our other auctions for more edm tooling $30 shipping for the continental USA
Classic stuff in good shape No rust + never had any Std 5 1/2 center height T slots are for std 1/2 studs for Bridgeport U Will Never Find Better@ see pic 4 dimensions@ See Pic For Details Combine Shipping WORLDWIDE SHIPPING IS NO PROBLEM@ Double super duper amazo extra cheapo shipping@ XXXXXXXXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real ... morecost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cram it all into one flat rate 5.00 envelope. I am not a for profit shipper(small club around here!I just want to clear out all of this stuff# REAL COST NON ABUSIVE SHIPPING-NO"I FEEL LIKE AN IDIOT TO PAY THAT MUCH SHIPPING" Nice stuff Combine! and no ridiculous added fee for handling extra items or similar scams! NOTE SHIPPING COST + COMPARE TO OTHERS-WHY GET BONED? COMBINE SHIPPING-ALL SHIPPING IS AT REAL COST-I DO NOT MAKE MONEY ON SHIPPING
TAILSTOCK FOR ROTARY TABLE DIVIDING HEAD ETC. CENTER HEIGHT RANGE 5-1/2-6-1/4"
L-W 10" Universal Dividing Head with Power Take-Off L-W Universal Dividing Head Ref. 74-21(53A-180) Model No. 10" Power Take-Off Mechanism This operates from the left hand side of the table. Swing at 0 Degree Tilt: 11" Head Swivels: 20 Deg. to +100 Deg. Table to Drive Shaft Center: 4" Indexing Positions on Plate: 21. 23, 27, 29, 31& 33 External Spindle Nose Mount: 2-1/4"10 Internal Spindle Nose Taper: 3 MT Diameter of Center Hole: 1-3/16" Overall Dimensions: 15" x 15" x 12" High Equipped With: Dividing Plate Center Approximate Shipping Weight: 130 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. ... morePlease contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
ELLIS DIVIDING HEAD WITH- 0.875 THRU HOLE ELLIS DIVIDING HEAD WITH- 0.875 THRU HOLE With: Tailstock 2 Dividing Plates* RETURN POLICY: This purchase comes with a 14-days money back guaranteed. SHIPPING IS NON REFUNDABLE. NO EXCEPTIONS. Buyers are responsible for all shipping fees on return UNLESS we ship the wrong item. All Returns must have RMA(Return Authorization Number) issued from Seller or package will be refused. Please contact seller by email for the RMA# CONTACT US For all questions or issues please email us at parts@robonex.com* or Call us M-F 9:00 am to 5:00 pm EST at(330) 408-5353* PAYMENTS: PayPal- We accept Visa/MasterCard. Discover and Amex through PayPal only. For personal checks please send your checks electronically via PayPal. If you make the payment through PayPal. We can ONLY ship to your PayPal confirmed address. No exceptions. ... morePayment must be received within 5 days or a Non Paying Bidder Alert will be filed. FEEDBACK: Feedback is an integral part of eBay. Please leave feedback for us on eBay and we will do the same for you. If you are considering leaving us negative or neutral feedback. Please give us the opportunity to resolve the issue first. We will try our best to help you. Powered by
ELLIS DIVIDING HEAD WITH 5 INCH CHUCK- 0.875 THRU HOLE ELLIS DIVIDING HEAD WITH 5 INCH CHUCK- 0.875 THRU HOLE With: Head Riser Block Tailstock Tailstock Riser Block* RETURN POLICY: This purchase comes with a 14-days money back guaranteed. SHIPPING IS NON REFUNDABLE. NO EXCEPTIONS. Buyers are responsible for all shipping fees on return UNLESS we ship the wrong item. All Returns must have RMA(Return Authorization Number) issued from Seller or package will be refused. Please contact seller by email for the RMA# CONTACT US For all questions or issues please email us at parts@robonex.com* or Call us M-F 9:00 am to 5:00 pm EST at(330) 408-5353* PAYMENTS: PayPal- We accept Visa/MasterCard. Discover and Amex through PayPal only. For personal checks please send your checks electronically via PayPal. If you make the payment through PayPal. We can ONLY ... moreship to your PayPal confirmed address. No exceptions. Payment must be received within 5 days or a Non Paying Bidder Alert will be filed. FEEDBACK: Feedback is an integral part of eBay. Please leave feedback for us on eBay and we will do the same for you. If you are considering leaving us negative or neutral feedback. Please give us the opportunity to resolve the issue first. We will try our best to help you. Powered by 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13ee71cc190-0xf1-
K&T INDEXER. VERY NICE SHAPE EVERYTHING YOU SEE IN PICS CALL WITH QUESTIONS 716-474-7447 THANKS GARY
Here is a INDEX MOUNTING PLATE from an unknown dividing head. Includes 1 double sided 6" index plate and the 2 brass indicators and clamp. Rear of casting shows#914 and H. Clamp bolt intact and part has no damage or repairs. In storage last 30yrs.Shipping flat-rate to the lower 48 is $13 all others must contact seller for actual cost.
Enco 74000 Swing Dividing Head 3-7/8" Center Height Item comes with all pictured above. This Listing is for(1) Enco Swing Dividing Head USED. ShelfG27 05137500JB Shipping options: As you can see we offer a variety of shipping options for domestic shipping. Please be aware that items MUST be purchased and paid by 1pm eastern time in order to be shipped the same day for UPS. Otherwise your package will be picked up the following day. Call us at 866-293-8981 if you have concerns about when your shipment will ship. Credit Card payment processing: If you would like to pay using credit card over the phone. You can call our customer service toll free at 866-293-8981. They will be happy to help you complete the payment over the phone. Sales tax: MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax ... moreexempt for is filed with our company. No exceptions. International shipments: For international shipments we ship primarily United States Postal Service. We will ship USPS. If the insured value does not exceed their maximum insurable value, in which case we may opt for an alternate company such as UPS or Fedex at our discretion. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at it's ACTUAL purchase price. It is against federal laws to declare anything BUT actual sale value. Freight Items: If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. You MUST set up your own customers broker on your end within your own country. We MUST include this information with the original bill of lading for the freight company.
good used tail stock for indexer or dividing head marked 91002 height raises. Lowers and tilts approx 6" center height in pictures removable 3 MT center please check my other auctions and happy bidding! everything we can combine into a large USPS flatrate box will ship for $16.85 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
You are bidding on a Ellis 8" Dividing Head w/ Buck Chuck Specifications w/ 4" Buck Adjustru Chuck(1) 15-20 Division Plate(1) 21-33" 1) 37-49" 1) Many Divisions Good Condition Good Condition: Item is free of any significant dents. Marks, imperfections that would impair the functioning of the item(unless specified in the description) Good Usable Condition: Item may have dents. Marks, imperfections that do not impair the functioning of the item(unless specified in the description) Machines/Tools that cost above $500.00 please pay with credit card or wire transfer. We guarantee that the item purchased is packaged exceptionally well. Once it is picked up by a common carrier(UPS etc) we lose control over how the item is handled. If you receive an item and it(or the box) appears damaged. Do not sign or accept. If the item is ... moreleft at your home or business, and you later find that it is damaged, take pictures and notify the carrier. inkfrogproseries. The machine/item is located in Bay Shore. NY 11706 Shipping costs to buyer location are not included with the machine price We can provide a freight quotation, buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required, we quote crating or palletizing seperately and it is not included with the sale price. We'll quote per customer requirements, customer shipping method& machine design. Shipping can be confusing. Relatively inexpensive, but heavy items, can cost more to ship than the item itself. Our experience is to allow 1-2 weeks for freight delivery. Please contact us at info@sagmachinery.com or give us a call at: 1-631-586-1768 OR 1-800-334-0175 if you have any questions about shipping.Upon arrival of your machine, unpack and immediately check for visible damage. Call Sag immediately– you will need to take pictures and email to info@sagmachinery.com. Make sure you note on BOL BEFORE the driver leaves. We accept paypal(info@sagmachin
This is a USED 6-1/2" Dividing Head and Tailstock made by L&W Chuck of Toledo. Ohio. It includes 3 indexing plates and a drive dog. The head will swivel 20-degree in one direction and 95-degree in the other and it has a#9 Brown and Sharpe female spindle. Do not compare this to the cheap imports available in the market today, these were one of the best Dividing Heads made. Check out my and by adding my eBay Store to your Favorites! Visit our website. Available at our Ebay Store Site, for a complete listing of all our products and vendors. It is fully interactive and will show you current pricing and stock availability on thousands of items! Register today to place orders, print statements, expedite orders and more! Also listed will be our toll free telephone and fax numbers for your convenience. Get your copy of our 450 page T&S ... moreCatalog, with listings of popular items from all the companies we represent. Direct Links to all our vendors which include some of the top names in the industry; Kennedy, OSG, Titex, Clausing, Jet, Precision Twist, Wilton, Norton, Starrett, Allied, Mitutoyo, Keo, Brown& Sharpe and Jacobs, just to name a few! WE SPECIALIZE IN CUTTING TOOLS! Hundreds of decimal reamers, including over and under size metric reamers. Hundreds of special taps from#000 to 4" endmills, toolholders, abrasives, fasteners, machinery and much more. Experienced sales staff.large inventory.competitive pricing.give us a call! THANKS FOR SHOPPING.T&S!
Used Liang Yu Tools Co. BS-0 Dividing Head With 4" 3-Jaw Chuck Brand~ Liang Yu Tools Co. Model~ BS-O Item~ Dividing Head S/N~ 11057 Base Size: 3-1/2" x 6-1/2" Height~ 7" Sold As Is Where Is. With no implied warranty or guarantee. Our Inventory# 8432 Information is Preliminary. Subject to Buyer Verification. If you would like to inspect this item please contact us to make arrangements. We are a member of the MDNA(Machinery Dealers National Association) Orca Machine Tools. Inc. is a stocking used machine tools dealer in Albertville, MN. Please contact us with any questions you may have. There is a $20 loading charge on freight shipments. Buyer is responsible for all shipping costs. US Buyers: Insurance is provided at the buyers request and at the buyers cost. International Buyers are required to pay for Insurance. Please ... morewait for an Invoice from us prior to sending payment. If you wish to purchase multiple items. We combine items for shipping and send you an invoice for all items with the combined shipping price. Minnesota buyers will be charged sales tax. Payment in full must be made within 2 days of bid closing. We accept PayPal. Funds must clear prior to item shipment. Visit our eBay Store! Powered by The free listing tool. List your items fast and easy and manage your active items.
YOU ARE BIDDING FOR ONE MASKING PLATE. FITS MOST 8" SUPER SPACERS, EMAIL FOR DIMENSIONS. I have 2,2,2,3,3,4,4,4,8,8 and 12 notch plates remaining as of feb 21 2013 YOU ARE BIDDING FOR ONE PLATE 012-08-04-19/040 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER ... moreTHEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chem
REAR MASKING PLATE COVER FITS MOST 8" SUPER SPACERS 012-08-04-19/040 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND ... moreTHE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, PAINT, ENGRAVING OR GREASE ON THEM. ASK FOR BETTER PICS IF YOU CARE*
See Pic For 12" 24" Starrett Combination Square ```````````````````````````````````````````````````````````````````````````````````````````````````````` Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit ... moremotivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 piec
WM CARROLL 8" DIVIDING HEAD COMES WITH 2 PLATES TAIL STOCK AND CENTER. SER#ESR10E23-10
CINCINNATI UNIVERSAL 10" DIVIDING HEAD WITH TAILSTOCK.GEARS, 4 DIVIDING PLATES WITH 8" 3 JAW REVERSABLE TOP JAW CHUCK, GEAR SET IS MISSING 18,19,21 AND 55 TOOTH GEARS
BRIDGEPORT 1-2-3-4 Rotary Table Lathe Milling Head DIVIDING INDEX INDEXING Disk PLATE Manufacturer: Bridgeport Part Number: 1. 2, 3, and#4 Plates Quantity: Four(4) Plates PAYMENT: Paypal payment is due immediately for“Buy-it-now” listings and within 2 days for auction listings. If payment is not received within the specified time. We reserve the right sell the item to a different buyer. SHIPPING: Shipping Address: According to Ebay/Paypal policies. We are required to ship ONLY to the address in either your Ebay(default shipping address) or Paypal account. The request for shipping to a different address cannot be honored as it disallowed according to Ebay/Paypal policies. International Shipping: Import duties. Taxes, and surcharges are as quoted when shipped through the Global Shipping Program. If the item is not shipped through the Global ... moreShipping Program. Then duties, taxes, and surcharges are not included in the item price or shipping charges, and they are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be if you are concerned. ABOUT US: We are not affiliated with the brand names being sold. And brands mentioned are for identification purposes only. TERMS OF SALE: Items for sale are in working condition unless otherwise specified. The item(s) in the photos are the actual item(s) for sale. And it is exactly what you will receive. Only the item(s) shown in the photos are included. Items in the photo(s) will supersede the written description should there is any discrepancy due to inadvertent description error. Please refer to photos for details and condition. If an item is used. Please note that it will have the expected wear when purchasing used goods. All measurements are approximates. Items are sold in“as is” condition; and returns are not accepted without prior agreement and will only be issued for serious and gross error was made in the listing. Buyer is to pay for the return shipping of the item and a 10% restocking fee.
Globe Dividing Head and Tailstock. Models 409-0& 410-0, This set is near mint. I recently cleaned the cosmoline from the unit. I purchased this unit as NOS in 2001. The dividing plate has 4 rows of detent holes 44,54,56,60. The headstock spindle is MT2. These were an opton for the Globe Milling Attachment made for Logan, Sheldon,other lathes. This set has 3/8" keyways and was mounted on my Benchmaster milling machine. Rare accessory. I ship to USA 50 states only!
A 1940 Cincinnati Universal Dividing Head and Associated Equipment Operator's Instruction Book. It has 71 pages and is in good used condition. Full of Tables. Illustrations and actual photographs. We've included several photos for your perusal. 1940 Cincinnati Universal Dividing Head Operator's Instruction Book! Shipping is based on the zip code you have registered with ebay. We're trying to help keep shipping costs as low as possible and we don't charge a handling fee of any kind! We're always glad to pack multiple items together to save you on shipping. Please. Bid only if you intend to complete the transaction, regretfully non-paying bidder notifications will be filed according to ebay’s Rules and Regulations for unpaid items. Sadly. It’s the only way we have to recoup the fees we have paid to ebay for unpaid items. ... moreInternational Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my other items and be sure to add me to your favorites list! Powered by The free listing tool. List your items fast and easy and manage your active items.
HARDINGE T800 DIVIDING HEAD. IN GREAT CONDITION! PLEASE SEE PICTURES FOR MORE DETAILS.
PAIR OF UNIDENTIFIED CHANGE GEARS 60T AND 50 T 7/16"W HOLE IS SPLINED WITH 5/8 MINOR DIA. 3/4 MAJOR DIA 11 SPLINE. 2008-25 PLEASE READ BEFORE BIDDING: EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. ... moreIF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, PAINT, ENGRAVING OR GREASE ON THEM. ASK FOR BETTER PICS IF YOU CARE* All items are subject to local sale while listed. If you need fu
UNIDENTIFIED CHANGE GEARS HELICAL CUT. 48.44,44,40T, FITS 6 SPLINE SHAFT WITH MAJOR DIA OF 1-1/8 MINOR DIAMETER 1-5/16, GEAR FACE WIDTH IS 1-1/4, BUYER PAYS $9.80 FOR USPS PRIORITY MAIL USA SHIPPING FROM 30527 2008-25 PLEASE READ BEFORE BIDDING: EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO ... moreBE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, PAINT, ENGRAVING OR GREASE ON THEM. ASK FOR
aims ELLIS PRECISION DIVIDING HEAD w/ SKINNER 6" THREE-JAW CHUCK + PLATES read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in U.S.A by Ellis. This is a Precision Dividing Head with Skinner 6" Three-Jaw Chuck in good condition. Features: Unit is fitted with a Skinner 6" Three-jaw Lathe chuck. Designed to render accurate and efficient service and to satisfy all the requirements demanded by the average machine shop. Converts any ordinary milling machine or tool grinder into a universal machine. With the dividing head. Any double angle drilling or grinding operation will equal many rotary table jobs. Has adjustable worm. Accurately cut bronze worm-wheel. Embodies 40:1 ratio crank indexing dividing head. Can easily adjust to any angle between-90 deg. to +90 deg. from a horizontal ... moreposition. Specifications: Swing: 6-1/2" Hole through Spindle: 15/16" Spindle Nose Thread: 1-3/4"8. Crank Indexing Ratio: 40:1. Divisions: Up to 400. Base to Chuck Center: 5-1/2" Chuck Diameter: 6" Chuck Thickness: 2" Chuck center bore through hole: 1-1/2" Overall Dimensions: 10" x 9" x 10" tall. Comes as shown in pictures. Reliable Tool currently has a large selection of products listed. Please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ELLIS PRECISION DIVIDING HEAD w/ SKINNER 6" THREE-JAW CHUCK + PLATES ELLIS PRECISION DIVIDING HEAD w/ SKINNER 6" THREE-JAW CHUCK + PLATES ELLIS PRECISION DIVIDING HEAD w/ SKINNER 6" THREE-JAW CHUCK + PLATES ELLIS PRECISION DIVIDING HEAD w/ SKINNER 6" THREE-JAW CHUCK + PLATES ELLIS PRECISION DIVIDING HEAD w/ SKINNER 6" THREE-JAW CHUCK + PLATES Reliable Tool Inc. c 2011 | Powered by
This is a dividing index plate. I'm not sure exactly what it fits but the overall diameter is 4.850" and it is 0.300" thick. The two bolt holes as spaced 1.900" approx) center to canter. The numbers on this one are 43-42-41-38-37-34. Great quality and condition. Don't miss it as it includes FREE Priority mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! ... moreI ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
Up for auction is a lightly used Emco 6" Dividing Head Rotary Table. In good working condition, moves freely, has a few minor"oops" marks on it(pls see pics) Includes 3 Index Plates and original cardboard box(box is beat up) Please see my other machinist tools
For sale is an excellent condition hard to come by Walter SHU4 tilting rotary table! Everything is in excellent working condition! It has a very light amount of surface rust on the table due to storage for 14months but all was oiled and should be cleanable; I will find out shipping weight shortly; though it is under 150lb so should be UPS able. contact me for more info I package well and ship fast! Happy bidding: 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13f3ef117a2-0xff-
Up for auction is a Brown& Sharpe Dividing Head#4450 with Center. In good working condition, looks to have been lightly used, moves freely, dirty/tarnished from age/use. PLEASE NOTE that the 2 parallels are NOT included(just used them to line up the centers for the pic) Brief description as follows: From base to center measures approx 2-1/2" Alignment keys are approx 1/2" wide Index plate measures approx 4" dia and has increments of 18. 20, 22, 24, 26, 28 Please see my other machinist tools
Normal 0 false false false MicrosoftInternetExplorer4 FEEL FREE TO E-MAIL FEEL FREE TO CALL 203.265.5639 ELLIS DIVIDING HEAD BUCK 5" ADJUST-TRUE CHUCK THIS IS A REAL BEAUTY THE CHUCK ALONE IS WORTH $500 ALL SHIPPING COSTS ARE TO BE PAID BY THE PURCHASER. OUR ZIP CODE IS 06492 CHECK OR WIRE TRANSFER PREFERRED THE ITEM IS LOCATED IN OUR WAREHOUSE AND CAN BE VIEWED AT ANY TIME
Here is a Leitz optical dividing head. It is extremely expensive new. The resolution for rotation is 1 sec of arc. The light source is missing. But any fiber optic source can be used. The spindle is Morse#4. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. All international bidders are subject to a $20.00 fee to cover additional paperwork. Multiple purchases on the same day will only be charged one fee. All international shipments will be through the U.S. post office ONLY. Payment will be via an international money order. Sales tax is charged for PA sales unless exempt*
very good used dividing head Carroll USA- works correctly and turns smooth approx 3 1/4" center height 4" 4 jaw chuck- Union Mfg USA- 1 of the adjusting screw sockets is chipped 9 B&S taper drive center spindle nose thread protector 3C collet adapter and drawtube index plate 20. 19, 18, 17, 16 and 15 holes index plate 33. 31, 29, 27, 23 and 21 holes index plate 49. 47, 43, 41, 39 and 37 holes please check my other auctions and happy bidding! will ship for $16.85 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
good used Steady Rest for indexer or diving head mfg unknown# 8382 approx 4" to 5" height range please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
good used index plate approx 5 3/8" dia x 1 1/2" hole different pattern on each side 49. 47, 46, 44, 43, 41 and 39 holes 28. 27, 26, 25, 24, 23 and 22 holes please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
good used index plate approx 5" dia x 1 1/8" hole 33. 31, 29, 27, 23 and 21 holes please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
Kearney& Trecker Universal Dividing Head. K&T, K& T This item was purchased from working surplus maintenance inventory at a local manufacturing facility. It is in good shape and ready to go to work in your shop. DS-963 Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the ... moreproblem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. International weight and size restrictions vary. We will ship your item to the most cost efficient way we can provid
aims JAPAN! NEWS 6" SEMI-UNIVERSAL PRECISION DIVIDING HEAD read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Japan by News. This is a Precision 6" Dividing Head in good condition. Features: Can easily adjust to any angle between-10 deg. to +90 deg. from a horizontal position. Divide any angle by the direct. Indirect or differential methods. Spiral machining capability. Hardened and ground worm gear has a 40:1 gear ratio. 24 position direct mount index plate. 360 degree Positive Locking brake shoes. Specifications: General: Size: 6" Semi-Universal Center Height: 3.937" Plate Diameter: 4-3/8" Center Concentricity: 0.0004" Inside taper concentricity of spindle: Measured at Spindle Nose: 0.0004" Measured at Arbor(12" long) 0.0008" Axial Movement ... moreof Dividing Spindle: 0.0002" Alignment of Dividing Head and Tail stock: Vertical Plane: 0.0008" Horizontal Plane: 0.0008" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. JAPAN! NEWS 6" SEMI-UNIVERSAL PRECISION DIVIDING HEAD JAPAN! NEWS 6" SEMI-UNIVERSAL PRECISION DIVIDING HEAD Reliable Tool Inc. c 2011 | Powered by
Center Height ~3-1/2" Tail Stock Center for Indexer or Spacer or Dividing Head Base measures 3" x 3-1/2" Fits a 5/8" wide T-Slot Pictures are of the actual items Used but in good condition
See Pic NOTE: For standard thickness rules but rare smaller pattern- Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" no no no no no no no el bono on shipping see pic 4 details Combine Shipping CHEAP SHIPPING Will Ship Anywhere and Everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" ... moreSaved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cram it all into one flat rate 5.00 envelope. I am not a for profit shipper(small club around here!I just want to clear out all of this stuff# REAL COST NON ABUSIVE SHIPPING-NO"I FEEL LIKE AN IDIOT TO PAY THAT MUCH SHIPPING
For Sale: Small indexing head adjustable tilt table and swivel base 5" diameter table. This is from either a Bridgeport or Cincinnati mill. Feel”6yuhm nb free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close ... moreof the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to Contact me personally at(815) 299-7625 Monday through Friday between 11:00am and 7:00 CST. I can also b
Used indexing plates. Both same size one is in better shape. Both have A few nicks. No cracks. One has a divot near one hole. Covers 24,25,28,30,34,37,38,39,41,42, 43,46,47,49,51,53,54,57,58,59,62, 66. Thanks for looking if you have any questions please ask. Posted with
This listing is for a vintage Brown& Sharpe indexing head. 656. Please notice that a piece has chipped off at the top. Measurements are listed below: Indexing plate diameter: 5" Spindle hole diameter: 1" Rotating plate diameter: 8" Unit dimensions: 15" x 13" x 11" We welcome any questions that you may have prior to bidding. Feel free to send us a message or contact Steve via phone at 815-758-6534 during normal business hours. We will respond to your phone calls as soon as possible. PLEASE READ THE FOLLOWING VERY CAREFULLY: Fees: An 8.5% State of Illinois sales tax is charged for all winning bidders that are Illinois residents except for those that have a state tax ID. A $35.00 palletizing fee is required for each pallet used on LTL truck shipments The cost of any item requiring crating shall be determined ... moreafter the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction. If 30 days have passed since the item was paid for. The item will be considered abandoned and the winning bidder is deemed to have forfeited all monies paid to the seller. The item will then be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. Items Requiring Freight Shipment: All items are shipped F.O.B. from Dekalb. IL 60115. Many of our customers have used the following trucking/freight companies for their shipping needs: Small Business Transportation at 888-368-6022 x218. Contact: Gil Freight Quote at 888-595-6298 x1250. Contact: Bob All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company.
Dividing Head Plates Lot of 12. 2 are 6" OD and 10 are 5" OD. Used and Unused, As You see them. Free shipping in USA only 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13f81ed8524-0x105-
LOTS OF AUCTIONS ONLINE NOW! Brand Unknown Packaging In Original Box Condition New Old Stock Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 3 1/2" x 3 1/4" Base with 7/16" Groove. 4" Height to tip of center. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist ... moreand woodworker.