In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
9500.00
Buy It Now
Condition: Used
Location: Chatsworth, United States
Make:Mo ri Seiki. Dual Turret. Chip Conveyor. UPPER TURRET. LOWER TURRET. Spindle in good running condition. All axis in smooth condition. This machine ... moreis located in Los Angeles county, CA.
$
22500.00
Buy It Now
Condition: Used
Location: Pomona, United States
Swing In Gap: 27". Swing Over Bed: 17". Distance Between Centers: 50". Spindle Speeds (12): 32- 1,800 RPM. Cross Slide Travel: 10". 3 & 4 Jaw Chucks. ... moreEQUIPPED WITH Weight: 5,000 Lbs.
$
8950.00
Buy It Now
Condition: Used
Location: Louisville, United States
18 x 35 Mori Seiki ML 850 Engine Lathe 18" Swing35" Between Centers9.84" Over Cross slide8" 4 jaw chuckL0 Spindle NoseTaper Attachment1 1/2" Spindle holeTailstock ... more# 4 morse taperLive Center and Jacobs Chuck for tailstockQuick change Tool Post5 hp. 220—440-V 3 phase4ft W x 7.5ft L x 4.5 ft H4257lbs
$
4250.00
Buy It Now
Condition: Used
Location: Woodruff, United States
MANUFACTURE: MORI SEIKI. LOAD: 33.0KVA. CYCLE: 60HZ.
$
10000.00
Buy It Now
Condition: Used
Location: Santa Ana, United States
MORI SEIKI SL-25A5. Bar Capacity 2.4". Machining Length 25.39".
$
24000.00
Buy It Now
Condition: Used
Location: Warminster, United States
Year: 1998. Table Top to Spindle Nose 5.9" - 26". Used Mori-Seiki SV-500/40. Spindle Taper BT #40 Taper. Spindle Motor 30 Min. 30 / 25 HP. 20 Station ... moreSide Mounted Tool Changer; Chip Conveyor; CTS Interface (no pump); Rigid Tapping; RS 232 Port Interface; Oil Cooler; Auto Power Off System; Coolant System; Full Enclosure; All Available Manuals.
$
19500.00
Buy It Now
Condition: Used
Location: Novi, United States
Chip Conveyor. - Coolant Tank & Pump. Main Motor 15 hp. Spindle Speed 24,000 rpm. Spindle Taper BT-30. Rapid Traverse Rate (X/Y/Z) 2362 ipm.
$
44500.00
Buy It Now
Condition: Used
Location: Lincolnshire, United States
If not, we reserve. Turret Index - Single Step.0.25 Seconds. Item Dispute will be opened.106.1"(L)x75.7"(W)x83.5"(H). Preliminary Specifications Subject ... moreto Verification. Daikin Chiller Unit.
$
150.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Gadsden, United States
New in box Mori Seiki Tooling block. This item has never been used and has been stored in a clean. Dry machine shop. The box top is missing. Please email ... morequestions. Thanks. I do not know the part number but I think it's for early SL series.
$
29500.00
Buy It Now
Condition: Used
Location: Canada
2005 Mori Seiki ZL-203 SMC CNC Lathe, Live Tooling, Upper And Lower Turrets, B-Axis, C-Axis, Chip Conveyor. model: MORI SEIKI ZL-203SMC (2005). MORI SEIKI. ... moreMax RPM (Live Tooling) Live Tooling Max Swing.
$
82999.00
Buy It Now
Condition: Used
Location: Newton, United States
Twin Turret (8 Station). Note: No tool holders or wedges included. In service and under power. Electrics: 220V, 3 Phase. Remote Hand Wheel.
$
69500.00
Buy It Now
Free Shipping
Condition: Used
Location: Westminster, United States
MORI SEIKI NL2000Y,2006 8” Chuck. Msx850 controlVery good condiction give full tooling have 5 life toolingsMade in Japan have UL
$
32000.00
Buy It Now
Condition: Used
Location: Chatsworth, United States
Make:M ORI SEIKI. Excellent working condition and available to view under power. Spindle is quiet and travels are smooth. Sample video available. Includes ... morea 4th axis rotary table. 4th Axis Rotary Table Included.
$
34500.00
Buy It Now
Condition: Used
Location: Guilford, United States
Full C Axis on main chuck and sub spindle 3 Live tools for the OD X axis 4 each of live tools for the face (z Axis), on the main and sub so a total of ... more10 live tools. model: MORI SEIKI SL-200SMC (2000).
$
2900.00
Buy It Now
$6.00 Shipping
Condition: New – Open box
Location: Edon, United States
MORI SEIKI Turret for SL-1 CNC Lathe· Condition: Good. Pulled from working machine· Guaranteed to work. Buyer has 30 days to return if not fully ... moresatisfied.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14622ed4f6c-0x10b-
$
3150.00
Buy It Now
$50.00 Shipping
Condition: Used
Location: Stroudsburg, United States
HTML Online Editor Sample 7918 E McClain Drive Suite 101 Scottsdale AZ 85260 Tel: 480-212-0775 Fax: 480-922-1675 One(1) 2004 Mori-Seiki ZT-2500-Y. LATHE. ... more6-AXIS CNC, UNIVERSAL W/ LIVE TOOLING& SUB-SPINDLE. Control: Bar Capacity 2.8" Turning Diameter 14.9" Speed 4.000 RPM. Maximum Turning Length 13.7" Turret Positions(1) 12. Turret Positions(2) 12. X-Axis Travel(No1/ No2) 11" 7.9" Y-Axis Travel Upper Turret Y-Axis Stroke 3.54" Spindle Motors/1st& 2nd 30 HP. Spindle Bore 2.8" Spindle Nose JIS A2-8. Swing Over Bed 14.9" Equipped with Fanuc MSX-501 Control Tool Presetter Chip Conveyor Boxed Way Lathe Live Milling on all 12 Stations(both) Live Tooling Motors(both) 6 HP. Live Tooling Speeds(both) 4.000 RPM. Miscellaneous live tool holders Miscellaneous tool static holders Approx. Run Time 5.789 Hrs. Parts catcher with parts conveyor Chucks Collet Both Spindles Main Spindle collet S-30 Sub Spindle collet Microcentric CB 65 ND Axial Double End live holder 4 Holders for both Machines Radial single end live holder 2 Holders for both machines Live Collet ER32. Can be inspected under power in CA warehouse location. Video here: We can provide shipping quotes upon your request. Contact Tom at 480-212-0775 with any questions. Etc.
$
26000.00
Buy It Now
Condition: Used
Location: Chatsworth, United States
Make:Mori Seiki. M ORI SEIKI SV-503 Vertical CNC Machine Center. Easy Roll Out Chip and Coolant Pan. Rapid Feed Rates X/Y/Z. Cutting Feed Rates. Model:SV-503 ... more/ 40. We will not palletize, skid or crate an item over 1000 lbs.
$
2999.00
Buy It Now
$129.50 Shipping
Condition: Used
Location: San Carlos, United States
1990 MORI SEIKI MV-40B Vertical Machining Center, S/N 1355. Heavy Duty Box Way Construction. Helical Interpolation. SPINDLE NOSE TO TABLE TOP: 5.9 -26.0. ... moreMACHINE WEIGHT: 13,310 LBS.
$
7500.00
Buy It Now
Condition: Used
Location: Chatsworth, United States
MORI SEIKI SL-25. CNC Lathe & Turning Center. Swing Over Bed. Swing Over Cross Slide. Includes Tool Holder Blocks. Between Centers. Spindle Nose. Spindle ... moreSpeed.
$
2975.00
Buy It Now
$34.33 Shipping
Condition: New
Location: Eastlake, United States
SERVO ORION 1000T has new upgraded FANUC based software. It features the tool path graphics, user friendly operational interface. th ; axis type of Y, ... more4. If you want to retrofit any kind of CNC machines, knee mills, just call!
$
6250.00
Buy It Now
$60.00 Shipping
Condition: Used
Location: Stroudsburg, United States
NEW- NEVER USED! QTY. 1- MORI SEIKI LIVE ROTARY TOOL HOLDER PART NO. T32159A02 FOR USE IN DL-151 LATHE. THIS IS 100% MORI SEIKI O.E.M. EQUIPMENT! PLEASE ... moreFEEL FREE TO EMAIL QUESTIONS. PREFER TO SHIP USING BUYERS UPS ACCOUNT NUMBER. THANKS FOR LOOKING!
$
19000.00
Buy It Now
Condition: Used
Location: Lake Elsinore, United States
MORI SEIKI SL-150SMC CNC TURN MILL CENTER. Make: Mori Seiki. CNC LATHE / TURNING CENTERS. CNC Machines. New & Used CNC. CNC MILLING MACHINES. CNC TURRET ... morePUNCH. Talk to one of our Machinery experts to get a price quote and more information.
$
100000.00
Buy It Now
Condition: Used
Location: Lake Elsinore, United States
DMG MORI SEIKI DMU 50 ECOLINE 5 AXIS CNC MACHINING CENTER. Model No.: DMU 50. Make: DMG MORI SEIKI. VERTICAL MACHINING CENTERS. HORIZONTAL MACHINING CENTERS. ... moreCNC Machines. New & Used CNC. CNC LATHE / TURNING CENTERS.
$
34300.00
Buy It Now
Condition: Used
Location: Houston, United States
OKUMA CAPTAIN L-370 CNC TURNING CENTER. CNC LATHE / TURNING CENTERS. Make: OKUMA. CNC Machines. New & Used CNC. CNC MILLING MACHINES. CNC TURRET PUNCH. ... moreTalk to one of our Machinery experts to get a price quote and more information.
$
15900.00
Buy It Now
Condition: Used
Location: Clifford, United States
2000 Mori Seiki MV40-E. 8,000 RPM Spindle. 22" X, 16" Y, 18" Z Travel. Located at zip 18413. Local pickup only. 20 Tool ATC. I will include 20 various ... moretool holders. Weighs approx 9,950 Lbs.
$
7000.00
Buy It Now
Condition: Used
Location: Los Angeles, United States
Machine can be inspected under power in our warehouse, Spindle is very quiet.
$
14500.00
Buy It Now
Condition: Used
Location: United States
CENTERS 49". POWER 5 hp. Steady rest. 8" 3-Jaw chuck. EQUIPPED WITH.
$
13000.00
Buy It Now
Condition: Used
Location: Lenapah, United States
Mori Seiki MR-2000G Engine Lathe 20" x 78" 2" Spindle bore 2 Axis Acu-Rite DRO Steady & Follow Rest, Quick Change with holders, 3 jaw gator chuck A - ... moreSeries Spindle, coolant pump, foot brake. All products are as is.
$
20.00
Buy It Now
$5.00 Shipping
Condition: New
Location: Grand Junction, United States
Mori Seiki MV Junior Gear Pulley G66017A01 New S40B15Please look carefully at all pictures and feel free to ask questions before purchasing as I don’t ... moreaccept returns.
$
44500.00
Buy It Now
Condition: Used
Location: Fremont, United States
Item#3894 Mori Seiki SV50B 5 Axis CNC Vertical Machining Center Equipped With: MORI MSC-502(FANUC 18i) CNC CONTROLS TSUDACOMA TILTING/ROTATING TABLE RENISHAW ... morePROBE COOLANT TANK& PUMPS CHIP CONVEYOR RENISHAW PROBING JET PULSAR COOLANT SYSTEM Machine Specifications: TABLE SIZE 52" X 23.6" MAX TABLE LOAD 2.640 LBS TRAVELS(X) 40.2" Y) 20.1" Z) 20.1" RAPID TRAVERSE 1260 IPM SPINDLE TAPER CAT 40 SPINDLE SPEED 10.000 RPM TOOL CHANGER 40 ATC SPINDLE MOTOR 30 HP Shipping Point: Price: $ 69.000.00 SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655 kevinb@ontargetmachines.com
$
24500.00
Buy It Now
Condition: Used
Location: Cypress, United States
The CNC lathe is perfect for machining complex parts with high accuracy and repeatability. Don’t miss out on this incredible deal! MORI SEIKI SL-25B5 ... moreCNC LATHE. Spindle bore 3.15”. Spindle nose A-2-6.
$
49500.00
Buy It Now
Condition: Used
Location: Cypress, United States
1980 Mori Seiki SL-7 Fanuc 6-TB 30/37KW 10-1800 RPM CNC Lathe. Chuck ------------------------------32” 3-jaw hydraulic. Spindle nose -------------------- ... moreA-1-11. Spindle center height---------- 47”. Spindle speed-------------------10-1800 rpm.
$
5950.00
Buy It Now
Condition: Used
Location: Orange, United States
$
6500.00
Buy It Now
Condition: Used
Location: Troy, United States
MORI SEIKI LATHE, 1971. |- 240 volt - dual wound motor for half speed. |- Steady Rest. |- Trav-A-Dial. |- Coolant Pump.
$
114500.00
Buy It Now
Condition: Used
Location: Louisville, United States
Mori Seiki TL-2 CNC Lathe YASNAC 2000 B Control Box The Box Is Complete! This item is available for local PICK UP ONLY. If shipping is desired. It will ... morebe at buyers expense. An extra charge will be added for putting it on a pallet and securing it.Payment is required within 48 hours of making purchase.
$
14000.00
Buy It Now
Condition: Used
Location: Pulaski, United States
Model: MV-40M MORI SEIKI Four-Axis Vertical Machining Center. S/N: 4477(New 1993) Specifications: Table size Table travel. X-axis(longitudinal) Table ... moretravel. Y-axis(cross) Vertical column travel(Z-axis) Table load capacity Spindle taper Spindle speed Automatic toolchanger. Number of tools Maximum tool weight Maximum tool length Maximum tool diameter. Without adjacent tool Maximum tool diameter. With adjacent tool 17.7" x 35.4" 22" 16" 18" 1.540 Lbs. BT 40 30-8.000 R.P.M. 20 17.6 Lbs. 9.84" 4.92" 3.15" Equipped With: O-MF FANUC four-axis CNC control with RS-232 port NIKKEN CNC indexer for type 5C collets with tailstock Full machine enclosure(20) Station side-mounted bi-directional automatic tool changer with(7) BT40 tool holders Steel telescopic way covers Work light OIL MATIC oil temperature regulator SHOWA automatic lubrication system Coolant system 10/7.5 H.P. 30 minute/continuous duty) AC spindle drive motor and electrical controls Machine is wired for 220 volt operation. Approximate Weight: 13.310 Lbs. Approximate Dimensions: 87" L-R x 87" F-B x 101" H Location: F.O.B. Truck. Hauppauge- Long Island, NY- We Ship Worldwide Reference# XWY_GM3241
$
16500.00
Buy It Now
Condition: Used
Location: Canada
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& ... moreCheckout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 20.5" Swg 24.6" cc Mori Seiki SL-25B/500 CNC LATHE. Fanuc 16T, Toolsetter, 12"ch Ref# 149575 iammdna XCNCTC 1997 MORI SEIKI SL-25B/500 CNC TURNING CENTER SPECIFICATIONS: Chuck Size. 12" Max Diameter Bar Capacity. 2.5" Max Swing Over Bed. 20.5" Max Swing Over Carriage. 13.8" Max Turning Diameter. 10.2" Distance Between Centers. 24.6" Max Machining Length. 20.9" Spindle Motor. 20/ 15 HP AC Spindle Speed. 35- 3500 RPM Spindle Bore. 3.15" Spindle Nose. A2-6 Tools. 10 Rapid Traverse Rates(X/ Z) 472/ 590 IPM X-Axis Travel. 6.3" Z-Axis Travel. 23.2" Tailstock Taper. MT#3 Turret Index(Single Step/ Full) 0.7/ 1.5 Seconds Machine Dimensions. 112" x 63.4" x 74.6" Approx. Machine Weight. 9240 lbs. EQUIPPED WITH: MORIC MSD-516(FANUC 16T) CNC CONTROL 14" Color CRT Super Caps Conversational Programming 12" Matsumoto ZA8-12-93-12 Hydraulic 3-Jaw Chuck Tool Presetter Programmable Tailstock Turbo Chip Conveyor(Side Exit) Slant Bed Box Way Construction All Available Toolholders and Manuals Machine Location: Click Here For More Mori Seiki Machines Click Here For More CNC Machines- C
$
1825.00
Buy It Now
$100.00 Shipping
Condition: New – Open box
Location: Anaheim, United States
This is just one linear rail, not a set of 2
$
1450.00
Buy It Now
Free Shipping
Condition: Used
Location: Cleveland, United States
94MM x 84MM BOLT HOLE SPACING. DMG MORI LIVE TOOL HOLDER. 1:1 DRIVE RATIO.
$
349.30
Buy It Now
Free Shipping
Condition: Used
Location: Biddeford, United States
MORI SEIKI SL-3 PARTS, boring TOOL HOLDER qty 4
$
54500.00
Buy It Now
Condition: Used
Location: Cypress, United States
MORI SEIKI CNC LATHE SL-65. Spindle Speeds ---------------------------1010 RPM 3 gear ranges. Spindle Nose ------------------------------A-2-15. (With ... morea 15” or 18” chuck installed). Through Spindle Hole -------------------6.3".
$
9500.00
Buy It Now
Condition: Used
Location: Chatsworth, United States
MORI SEIKI MV Junior CNC Vertical Mill. 20 Station, Side Mount Tool Changer. Distance Between Spindle Center and Column. Rapid Feed Rate (X/Y). Pull Stud ... moreType. Rapid Feed Rate (Z). Cutting Feed Rate. We will not palletize, skid or crate an item over 1000 lbs.
$
10500.00
Buy It Now
Condition: Used
Location: Chatsworth, United States
MORI SEIKI MV-40 CNC Vertical Milling Machine. 10000 mm/min. 20 Station Side Mount ATC. Cutting Feed Rate (x/y). Rapid Feed Rate (x/y). Vertical (Z Axis) ... moreTravel. Chip and Coolant Pan assembly. Axis Drive Motor (x/y).
$
12500.00
Buy It Now
Condition: Used
Location: United States
Mori Seiki MV-40B CNC Mill Vertical Machining Center mfg. 1993 Specifications: Table size 17.7" x 39.4" Table Travel- X axis 31.5" Y axis ... more16.1" Z axis 20.1" Distance from spindle nose to table top 5.94" Table load capacity 1540 lbs Rapid traverse rates 787 X. Y IPM 472 Z, IPM Cutting feed rate 0.04- 197 IPM Spindle nose Cat#40 Spindle speed 8000 rpm Tool Magazine 20 ATC Max Tool Diam. 4.5" Max Tool Length 9.84" Main motor 10 HP AC Machine Weight 13.360 lbs Equipped with: Yasnac Helical Interpolation Rigid Tapping 48 Pairs Extended Workoffsets Spindle Shiller Full Enclosures Coolant Machine is available for inspection under power by appointment Here is a link to a video of the machine running: ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3585 BUYER IS RESPONSIBLE FOR ALL FREIGHT ARRANGEMENTS AND COST shipping dimensions: 90" x 90" x 105" Approx. 13,400 lbs
$
40000.00
Buy It Now
Condition: Used
Location: Canada
Model: MORI SEIKI SL-75B (1999). MORI SEIKI. CNC Lathes. equipped with Turret Capacity 472 / 590 in/min. Rapid Traverse (X/Z) Sub Spindle.
$
10000.00
Buy It Now
Condition: Used
Location: Chatsworth, United States
Make:Mori Seiki. 5C Collet Nose on Spindle. Swing Over Bed. Spindle in good running condition. All axis in smooth condition. This machine is located in ... moreLos Angeles county, CA. Swing Over Cross Slide.
$
65.00
Buy It Now
$13.00 Shipping
Condition: Used
Location: Unionville, United States
Mori Seiki ?. Block Tool Holder. price is for 1 holder only, you choose. 10 x square tool holders.
$
34500.00
Buy It Now
Condition: Used
Location: Harrison, United States
MORI SEIKI VERTICAL MACHINING CENTER. AUTOMATIC DUAL PALLET CHANGER. SIDE ARM TOOL CHANGER. - FREE PURPOSE: 9,447 HOURS. HOURS OF USE AS SEE IN HOURS ... moreSCREEN PHOTO (11/13/2023) FLUSHDOWN COOLANT SYSTEM.
$
599.99
Buy It Now
$118.23 Shipping
Condition: New – Open box
Location: Millersburg, United States
Mori Seiki Winding Cover Rubber/Poly Retracting Apron Cover. Dump Hoppers. Lift Tables. Housing Is 55" Long with One Mounting Bracket. We are dedicated ... moreto understanding the unique challenges and opportunities that each industry faces.
$
7000.00
Buy It Now
Condition: Used
Location: Boynton Beach, United States
X Axis thrust bearing sounds worn but has done so for 10 years. Tool Changer Capacity: 20 Stations Tool Changer. Machine Travels (X/Y/Z): 22" x 16.1" ... morex 18.1". Spindle Taper: CAT-40 Taper.
$
6000.00
Buy It Now
Condition: Used
Location: Queensbury, United States
1998 Mori Seiki ZL35 CNC Lathe Specifications Chuck Size 12" Max Diameter Bar Capacity 3.77" Max Swing Over Bed Carriage 23.6" 16.7" ... moreMax Turning Diameter 15.4" Distance Between Centers 35.04" Max Machining Length 32.9" Spindle Motor 40/ 30 HP AC Spindle Speed 9- 2700 RPM Spindle Bore 4.1" Spindle Torque 992 ft. lbs. Tools Upper/ Lower Turret 10/ 10 X-Axis Travel Upper/ Lower Turret 8.9" 8.3" Z-Axis Travel Upper& Lower Turret 33.7" Tailstock Taper MT#4 Machine Dimensions(L x W x H) 205" x 78" x 90" Machine Weight 25.000 lbs. FEATURES: Fanuc MF-D6 CNC CONTROL Chip Conveyor For More Info Or To Set Up An Inspection Please Call Maury Cohn 1 800 888 4312 Okuma. Fadal, Haas, Makino, Doosan, DMG, Miyano, Mazak dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-145555c181a-0x110-
$
70.00
Buy It Now
$16.00 Shipping
Condition: Used
Location: Unionville, United States
Mori Seiki ?. Block Tool Holder. price is for 1 holder only, you choose. 4 x square tool holders.
$
4000.00
Buy It Now
Condition: For parts or not working
Location: Coffeyville, United States
MORI SEIKI. ENGINE LATHE. YASKAWA COOLANT MOTOR. VOLTS: 220/440. SERIAL NO.: 947071. TYPE: YFPC-10FJ. KJ-1-SURPLUS(1)WI.
$
22.00
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Port Richey, United States
Mori Seiki Operators Instructions. Lathe Manual. I do have a different manual operation and a parts manual covering the MS-650. We here, at Rebuilt Machinery ... moreunderstand you need your manual, NOW! You need your PDF ASAP and we understand it!
$
14995.00
Buy It Now
Condition: Seller refurbished
Location: Huntington Beach, United States
We have been the importer of Whacheon lathes & parts in the United States for over 40 years. Mori Seiki parts & accessories also available; both new and ... moreused. This is also listed for sale locally.
$
65.00
Buy It Now
$13.00 Shipping
Condition: For parts or not working
Location: Unionville, United States
Mori Seiki ?. Block Tool Holder. price is for 1 holder only, you choose. 8 x square tool holders ( second row ).
$
23000.00
Buy It Now
Condition: Seller refurbished
Location: Houston, United States
1992 MORI SEIKI ZL-15M CNC Lathe. S/N 224 MORIC D5F FAPT(FANUC 15TTF) CNC CONTROL Four Axis Simultaneous Turning with Upper& Lower Turrets C-Axis ... more5 Degree Indexing Capability 6" Kitagawa B206 Hydraulic Chuck 16C Collet Chuck Manual Tool Presetters for Upper& Lower Turrets Chip Conveyor Auto Parts Catcher Auto Power Off Three-Color Tower Light Tailstock SMW SpaceSaver 12.65 Autoload Short Magazine Barfeed 1 OD Live Holder 1 Face Live Holder 8 Holders for Upper Turret Boring Bar 6 Caps for Live Holders 1 Cut-Off Holder 3 Spindle Liners Please contact seller with any questions or to make an offer Freight prices are estimated and subject to change to a price agreed upon by buyer and seller at time of purchase OR b uyer may set up freight with their own preferred carrier. Thank you!
$
5484.85
Buy It Now
Condition: For parts or not working
Location: Roanoke, United States
Upper Turret 12 Stations. Lower Turret 8 Stations. Machine being sold as is for parts or repair. Has new led moniter installed. Machine Weight 12,000 ... morelbs. Motor 15 HP. Bar Capacity 1.6". Rapid Traverse (Z-Axis) 590 IPM.
$
299.99
Buy It Now
$19.95 Shipping
Condition: Seller refurbished
Location: Hampton, United States
This Turret ID Tool Block is designed for Mori Seiki machines and has a maximum cutting capacity of 1-1/2 inches. Made by GLOBAL CNC INDUSTRIES, this ... moreunit is suitable for metalworking applications and is a great addition to any workshop. The tool block is in excellent working condition and has not been modified. It is a non-custom bundle and was manufactured in United States. This Turret ID Tool Block is a reliable and sturdy unit type that can be used for a variety of metalworking supplies. It is a great investment for any business or industrial operation looking to improve their manufacturing processes. With its high-quality design and consistent performance, this tool block is sure to meet your machining needs.
$
200.00
Buy It Now
$43.90 Shipping
Condition: New – Open box
Location: Euless, United States
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
ZEISS MC-850 CMM CNC haas fadal mori seiki mazak hitachi femco mitutoyo doosan
Check out my! ZEISS MC-850 MACHINE IS UPON A CONSIGNMENT F ROM THE BANK. MACHINE HAS BEEN SITTING IN A WARE HOUSE IN IT'S ORIGINAL PACKAGING( CRATE) FOR MANY YEARS. CUSTOMER BARELY USED IT. FINANCING COMPANY HAS REPOSES THE MACHINE AFTER EIGHT MONTHS FROM PURCHASE DAT E. WE HAVE REMOVED IT FROM THE CRATE IN ORDER TO TAKE PICTURES AND ADVERTISE. LOOKS LIKE BRAND NEW MACHINE. BUT DO NOT KNOW HOW TO OPERATE/ TEST. WELCOME FOR INSPECTION. I TEM IS SOLD AS IS WHERE IS. YEAR OF MFG. 1990 WE HAVE ALL THE SHIPPING BRACKETS AND CRATES. FREE CRATING AND LOADING ON A LINE TRUCK. Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $200 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine ... moreSales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail For Trucking Quotations. Please call these 4 different brokers, s are as follows. Jack 541-770-1527. Ken 925-621-2270, Rod 800-578-0956, Joan 310-763-2585. For the sales within United States. Canada and Mexico, there will be no charge for loading onto a flatbed or stepdeck truck. The following will only applie to overseas sales. If the machine is sold to overseas. There will be $ 600 charge for loading into the container and securing, plus the charge for the purchase of the chains $ 300. We will charge no fee for loading this equipment onto a flatbed at our location. This will save you minimum of $ 1.200. Furthermore, we work with several freight companies that provide us with large discounts. For trucking quotations out of state, please contact Joan at 310 763-2585 Bennett Motor Express or hire your own trucking
SL-3 Mori Seiki cnc lathe
I have up for sell a Mori seiki sl3 cnc Turning center lathe needs Little tlc to front from where the coolant has messed up paint the lathe runs perfect was makeing parts up till January 10th 2013 and that was when i aquired the machine all tool holders are included the lathe is 80 or 81 model lathe holds good tolerance the shop i got it from just got new equipment and needed the room thanks call or text 336 479 6847 i will load at no extra cost Posted with
Mori Seiki SL-2 SL2 Instruction Manual (copy)
For Auction a reprint of the instruction manual for the Mori Seiki SL-2 Lathe. It is complete with all pages. Thanks for looking!
TL-5 Mori Seiki 2 axis CNC Lathe
Mori Seiki TL-5 Lathe W/Fanuc2System 5 Control SN N0 60 12"Diameter 3 jaw hydraulic chuck. 4" hole thru spindle,tail stock, extra jaw 8 Position turret. 30HP Spindle Drive Motor.Mitsubishi Electric DL-SCZ 22 K-D Type 220/440V. 2 axis CNC Control with RS-232 port. Spindle 25-2500RPM. Maximum cross travel 12" Maximum longitudinal travel 48" Approximate Weight 14000lbs. Approximate O A L 160"L-R 96" F-B 86"H.
SHOWA Lube Pump for Mori Seiki TL-2
SHOWA LUBE PUMP This is a Showa lube pump for a Mori Seiki TL-2. This item is available for local pick up only. If shipping is desired. It will be at buyers expense. We will gladly assist with loading. Payment is required within 48 hours of making purchase.
Machining Center Vertical 22" x 16" x 18" Mori Seiki Model MVJR
22" x 16" x 18" Mori Seiki Model MVJR 3 Axis Vertical Machining Center Specifications and Equipment X-Axis Travel: 22" Y-Axis Travel: 16" Z-Axis Travel: 18" Spindle Nose to Table Top: 5.9" Min. 24" Max, Spindle Speeds: 150- 6000 RPM, Spindle Tape: CAT 40, Spindle Motor: 7.5/ 5 HP, Equipped With: Yansac MX-3 CNC Control. 16 Position Side Mount Automatic Tool Changer, Half Height Guarding, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler at(773) 290-1825 or email at: scottt@assetexchangeinc.com
Machining Center Verticalwith APC Mori Seiki Frontier M-25-FV (1993)
Mori Seiki Frontier M-25-FV Vertical Machining Center with APC(1993) Specifications and Equipment Pallet size(2-pallets) 23" X 18" X-Axis travel: 13.78" Y-Axis travel: 16.54" Z-Axis travel: 12.99" Rapid traverse to X and Y axes: 944 IPM, Rapid traverse to Z-axis: 787 IPM, Taper in spindle: No.40, Spindle speeds: 0 to 8.000 RPM, Spindle drive motor: 7.5 HP AC, Automatic Tool Changer: 12 Tools, CNC Type: Mori-Fanuc 18M, Currently under power: Yes, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
Vertical Machining Center Mori Seiki Model MVJR (2) Pallet (1992)
Mori Seiki Model MVJR(2) Pallet Vertical Machining Center(1992) Specifications(Preliminary) X Axis Travel: 22" Y-Axis Travel: 16" Z-Axis Travel: 18" Table Size: 2) 15.75" x 24.75" Spindle Nose To Table Top: 24.6" Spindle Taper: 40, Spindle speeds: 6000, Tool Changer: 30 Position, Equipped With: Mori Fanuc MFM4 CNC Control. 30 Position Side Automatic Tool Changer, 2 pallets(automatic pallet changer) Machine being sold As is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
MORI SEIKI Maintenance Manual ZL-153 CNC LATHES binder Edition
MORI SEIKI ZL-153 MAINTENANCE MANUAL CNC LATHES good condition. Show shop staining and wear in metal clipped binder PLEASE ASK QUESTIONS PRIOR TO BIDDING This manual will be shipped media mail(5-10 days) I CURRENTLY HAVE A SELECTION OF MANUALS. PLEASE EMAIL IF THERE ARE ANY OTHERS YOU ARE LOOKING FOR
MORI SEIKI Parts List MODEL ZL-250 ZL-250MC
MORI-SEIKI PARTS LIST Applicable Model: ZL-250 ZL-250MC good condition. Shows shop staining and wear PLEASE ASK QUESTIONS PRIOR TO BIDDING This manual will be shipped media mail(5-10 days) I CURRENTLY HAVE A SELECTION OF MANUALS. PLEASE EMAIL IF THERE ARE ANY OTHERS YOU ARE LOOKING FOR
Mori Seiki MAPPS Inverter INVC511 Mapps III E77077
Known good pull from Mapps III 10.4 inch LCD control. CCFL tubes were bad and customer chose to replace inverter board along with tubes. Inverter tested good on Mori Fanuc LCD display panel. List price of 625.00 USD. Posted with
MORI SEIKI Parts List ZL-150 ZL-150 ZL-150S ZL-150MC ZL-150Y ZL150SMC ZL-150SY
MORI SEIKI PARTS LIST ZL150 Applicable Models ZL-150. ZL-150S, ZL-150MC, ZL-150SMC, ZL-150Y, ZL-150SY PLEASE ASK QUESTIONS PRIOR TO BIDDING This manual will be shipped media mail(5-10 days) I CURRENTLY HAVE A SELECTION OF MANUALS. PLEASE EMAIL IF THERE ARE ANY OTHERS YOU ARE LOOKING FOR ao5pta.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bisk%3Eao5pta-13e0ff4e15c-0xfb-
MORI SEIKI ZL-250 ZL-250MC PARTS LIST application model
M ORI SEIKI ZL-250 ZL-250MC PARTS LIST application model in binder fair condition. Shows shop staining and wear PLEASE ASK QUESTIONS PRIOR TO BIDDING This manual will be shipped media mail(5-10 days) I CURRENTLY HAVE A SELECTION OF MANUALS. PLEASE EMAIL IF THERE ARE ANY OTHERS YOU ARE LOOKING FOR
MORI SEIKI Operation Manual 1 & 2 model CL-15 CL-20 CL-25 NC unit MSC-518 MF-T8
MORI SEIKI OPERATION MANUAL I and MANUAL II Applicable Model CL-15 CL-20 CL-25 Applicable NC Unit MSC-518(MF-T8) good condition. Shows shop staining and wear PLEASE ASK QUESTIONS PRIOR TO BIDDING This manual will be shipped media mail(5-10 days) I CURRENTLY HAVE A SELECTION OF MANUALS. PLEASE EMAIL IF THERE ARE ANY OTHERS YOU ARE LOOKING FOR
MORI SEIKI BU-1/01 I/O PC BOARD IS REPAIRED WITH A 30 DAY WARRANTY
Thank you for your inquiry on this Ebay item. If you should have any questions on this item, Please call Thank you from NorthEast cnc. J
CNC Lathe 4 Axis with Subspindle Mori Seiki Model ZL15S
Mori Seiki Model ZL15S 4 Axis CNC Lathe with Subspindle Specifications(Preliminary) Swing Over Bed: 18.9, Distance Between Centers: 23.4" Collet Capacity(Main Spindle) 1.61" Chuck Size(Sub Spindle) 6" Spindle Nose(Main Spindle) A2-5, Hole Through Spindle: 2" Spindle Speeds(Main Spindle: 5.000 RPM, Spindle Speeds(Sub Spindle) 5.000 RPM, Tool Capacity(Upper Turret) 12, Tool Capacity(Lower Turret) 8, Equipped with: Fanuc 0TT CNC Control. 10 HP Main Motor, 7.5 HP Sub Spindle Drive Motor, Parts Catcher, 8" Chuck on Main Spindle, 4" Chuck on Subspindle, Machine being sold As Is. Loaded on truck Buyer is responsible for shipping. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com Video available at http:www.youtube.com/watch?v=uRhflq-T-uM&feature=youtu.be
Mori Seiki 2005 HVM 630 Horizontal Machining Center Very Low Hours Full 4th Axis
MORI SEIKI CNC HORIZONTAL M/C MODEL HVM 630 BRAND NEW CONDITION!60 Hours on Spindle. This is an HSK-63 Spindle. $255.000 Right now AVAILABLE NOW! BUILT FOR SPEED-Blazing Speed! 3.149 IPM RAPIDS Was in a LAB(Unused for 5 years) It was a MORI DEMO MACHINE in 2006. Was at IMTS SHOW in‘06! ONE(1) MORI SEIKI CNC HORIZONTAL M/C MODEL HVM 630 200 5 MORI DEMO MACHINE(NEW CONDITION) SPECIFICATIONS: Table Working Size. 24.8 In x 24.8 In Number of Pallets. 2 Pallet Indexing. 0.001 Degrees Max Table Load. 3080 Lbs. X Axis Travel. 40 In Y Axis Travel. 24.8 In Z Axis Travel. 23.6 In Maximum Spindle Speed.20, 000 RPM Spindle Taper. HSK A63 Number of Tools. 60 Tool Change Time(chip to Chip)3 Sec. Rapid Traverse Rate. 3, 149 IPM Spindle Motor. 60 HP Machine Weight. 46.200 lbs. EQUIPPED WITH: MSC 502 Control with MAPPS Conversational Coolant Thru Spindle(1000 ... morePSI) Full 4 th Axis Rotary Chip Conveyor Tool Length Measurement Flood Coolant Glass Direct Scale Feedback( All 3 Axes) Demo Machine PRICE…$255, 500.00 For More Info or to Inspect Call Maury Cohn 1 800 888 4312
KANTO SEIKI CHILLER OFF MORI SEIKI MV40
LOT 243 CHILLERS OFF MORI SEIKI MV40'S. THEY ARE OIL MATIC KANTO SEIKI'S MFG. NO. 89061098 MODEL NO. KTVM-6A-LM2 200 VOLT 50/60 HZ. 220 VOLT 60 HZ. 3 PHASE. WEIGHT: 110 KG. IF THESE ITEMS REQUIRE A PALLET FOR SHIPMENT THERE IS A $35 FEE PER PALLET IF YOU HAVE ANY QUESTIONS CALL 586-752-0090.
LYNDEX CAT 40 HOLDER ER 16 EXTENDED HAAS MORI SEIKI WITH PULL STUD
LYNDEX CAT 40 HOLDER ER 16 WITH PULL STUD HAAS STYLE VERY GOOD CONDITION WORKS JUST AS GOOD AS NEW A NEW ONE WOULD COST WELL OVER 120.00 THANKS FOR LOOKIN CHECK THAT 100% FEEDBACK
86 MORI SEIKI SL-3H SL3 SL3H SL4 CNC LATHE TURNING CENTER 10" KITAGAWA VIDEO
CLICK BELOW TO WATCH THE VIDEO OF THIS MACHINE: ARPI MACHINE SALES. OUR PHYSICAL ADDRESS: 12165 BRANFORD STREET SUITE F SUN VALLEY CA 91352 OFFICE: 818 890-7625 VERY IMPORTANT! PLEASE READ. AFTER PURCHASING THIS OR ANY OTHER ITEM FROM US. PLEASE LEAVE POSITIVE FEEDBACK AND GIVE US A 5 STAR RATING IN ALL 4 CATEGORIES. IF YOU HAVE ANY PROBLEMS WITH YOUR ORDER, PLEASE CALL US AT THE OFFICE IMMEDIATELY(BEFORE LEAVING FEEDBACK) AND WE WILL TRY TO RESOLVE ANY ISSUES YOU HAVE. FURTHERMORE, WE MARK ALL OF OUR ITEMS TO PREVENT ANY DISHONEST EBAYER FROM TRYING TO EXCHANGE OUR ITEM WITH THEIR OLD/NON WORKING ONE AND THEN ATTEMPT TO SEND BACK TO US BY CLAIMING IT AS NON WORKING IN ORDER TO RECEIVE A REFUND. THIS HAS HAPPENED SOMETIMES AND WE HAVE TAKEN SERIOUS ACTION AGAINST THESE FRAUDELENT PRACTICES IN THE PAST. THIS TYPE OF BEHAVIOR IS UNACCEPTABLE ... moreAND ACTION WILL BE TAKEN AGAINST THESE BUYERS THRU EBAY POLICIES BY REPORTING THEM TO EBAY IMMEDIATELY. HERE AT ARPI MACHINE SALES, WE REALIZE MOST PEOPLE ARE HONEST AND DO NOT PRACTICE TECHNIQUES MENTIONED ABOVE. BY THE SAME TOKEN WE ARE COMMITTED 100% TO PROVIDE SUPERIOR CUSTOMER SERVICE TO ALL. WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION SPECIFICATIONS: Machine location United States, Length 2794 mm(110 in) Width 1778 mm(70 in) Height 1930.4 mm(76 in) Weight 4192.4 kg(9240 lb) Specifications Chuck Size 10" Max Diameter Bar Capacity 2.63" Max Swing Over Bed 22.4" Max Machining Length 21.6" Spindle Motor 20/ 15 HP Tools 12 X-Axis Travel 6.3" Z-Axis Travel 22" Tailstock Taper MT#3 FEATURES: FANUC 11T CNC CONTROL 9" Monochrome CRT 10" Hydraulic Chuck 12 Tool Turret Programmable Tailstock Chip Conveyor Slant Bed Box Way Construction. SPECS SUBJECT TO VERIFICATION. THE MACHINE IS IN GREAT RUNNING ORDER. HAS NEW SPINDLE DRIVE. THIS IS A VERY SMOOTH MACHINE AND RUNS EXCELLENT. BE SURE TO SEE THE VIDEO ON TOP. YOU'RE WELCOME TO COME IN FOR INSPECTION. PLEASE CALL OR EMAIL IF YOU HAVE ANY QUESTIONS. REGARDS ARPI MACHINE SA
1998 Mori Seiki Model SL-80 CNC Lathe 24" Chuck, Chip Conveyor
MORI SEIKI Model SL-80A CNC LATHE/ TURNING CENTER Serial# 365 See it onYouTube! http:www.youtube.com/watch?v=McAEPYggm6A Specifications Chuck: 24" Cushman hydraulic power chuck(top tooling not included) Max Swing: 39.3" Max Swing over Carriage: 35.4" Spindle Bore: 8.5" Spindle Nose: A2-15 Spindle Speeds(4 Gear Range) 750 RPM MAX Turret Position: 6( no turret holders) Horse Power: 60hp Dimensions: 205"x95"x96" Weight: 35.200 lbs Control: Fanuc MSC 501 Chip Conveyor and coolant tank included. Condition: The machine runs well but there is wear and a gouge on the ways(see photo) Inspection: Please email Steve at slshighlander@gmail.com or call at 937-545-9932 to answer question and arrange onsite inspection. Buyer to Payer loading fee of $1000.00 Payment: Cashiers check or wire transfer.
Mori Seiki 2004 NV-5000 w/ 5 Axis table Fanuc Control HSK 63 New Spindle
This is a 2004 Mori Seiki NV-5000. With a Dual Head Nikken 5th axis. This machine has a New Spindle and tons of options! Call if you have any questions. Ask for Mauro 248-426-5555. Year: 2004 Make: Mori Seiki Model: NV-5000 Tabl Size Travels(X) Y) Z) Spindle Taper 37" x 19.5" 31.5" 20" 20" HSK 63A. Spindle Speed(NEW SPINDLE) Spindle Motor 12.000 RPM. 30 HP. Rapid Traverse 1.650 IPM, Automatic Tool Changer Tool Change Time Chip To Chip 60 Stations. 1 Second. 2.6 Seconds. MSG-501 CNC Controls 5 Axis Nikken 5AX-2MT-200-250FA(Dual Spindle Tilt and Rotary Table) Renishaw Probe In Machine Measurement Blum Laser(Tool Brake Detection) 60 Station ATC Hydralulic Clamping Coolant Thru Spindle Chip Conveyor Thermal Displacement Offset Shower Coolant System Ethernet If you have any questions. Please call Mauro 248-426-5555 Payment ... moreWe are currently accepting payments Check or Bank Transfers. Shipping We will load the machine onto any truck for free. Terms of Sale Machine is being sold"as-is. Where is" as inspected. Sales Tax State law requires that we charge applicable sales tax on orders shipped to addresses in the state of Michigan. 6.00% sales tax applies to all Michigan residents unless a tax exempt form is presented. There are no taxes charged on orders being shipped outside of Michigan. Payment We are currently accepting payments via Paypal. Cashiers Check, and Personal Check. All funds must be cleared prior to shipment of goods. Shipping Standard Shipping Hours are Monday through Friday until 4pm Eastern Standard Time. To request overnight or same day shipping please contact us at 248-207-4203. We ship via UPS and Fed-Ex. Shipping through other freight companies will require an additional $20 handling fee. And will be added to the final price. We are willing to ship using the buyers account number provided it is a US account number. For any Freight shipments(150 lbs or over) there will be a $20 handling fee. International Buyers: Please include a valid phone number with shipping instru
CHICK BL-6 CNC MILLING VISE HAAS MORI-SEIKI OKUMA
CHICK BL-6 CNC MILLING VISE HAAS MORI-SEIKI OKUMA, CHICK BL-6 VISE PARTS AS SHOWN. MAIN BODY, SCREW, HANDLE, JAWS, NO DAMAGE JUST MISSING PARTS. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
2004 Mori-Seiki ZT-2500-Y. Live Tooling, Twin Spindle, Twin Turret and more!
HTML Online Editor Sample 7918 E McClain Drive Suite 101 Scottsdale AZ 85260 Tel: 480-212-0775 Fax: 480-922-1675 One(1) 2004 Mori-Seiki ZT-2500-Y. LATHE. 6-AXIS CNC, UNIVERSAL W/ LIVE TOOLING& SUB-SPINDLE. Control: Bar Capacity 2.8" Turning Diameter 14.9" Speed 4.000 RPM. Maximum Turning Length 13.7" Turret Positions(1) 12. Turret Positions(2) 12. X-Axis Travel(No1/ No2) 11" 7.9" Y-Axis Travel Upper Turret Y-Axis Stroke 3.54" Spindle Motors/1st& 2nd 30 HP. Spindle Bore 2.8" Spindle Nose JIS A2-8. Swing Over Bed 14.9" Equipped with Fanuc MSX-501 Control Tool Presetter Chip Conveyor Boxed Way Lathe Live Milling on all 12 Stations(both) Live Tooling Motors(both) 6 HP. Live Tooling Speeds(both) 4.000 RPM. Miscellaneous live tool holders Miscellaneous tool static holders Approx. Run Time 5.789 Hrs. ... moreParts catcher with parts conveyor Chucks Collet Both Spindles Main Spindle collet S-30 Sub Spindle collet Microcentric CB 65 ND Axial Double End live holder 4 Holders for both Machines Radial single end live holder 2 Holders for both machines Live Collet ER32. Can be inspected under power in CA warehouse location. Video here: We can provide shipping quotes upon your request. Contact Tom at 480-212-0775 with any questions. Etc.
Takisawa CNC Lathe / Mori Seiki
Takisawa CNC Lathe/ Mori Seiki Model: EX-106K Serial Number: CB01E60211 Year Manufactured: 2001 Machine is in working condition. Contact me with any questions. Additional pictures or if you would like to come inspect the machine. Payment is required within 48 hours of making purchase. We only accept 5% payment through pay pal. The remaining balance needs to be wire transfer or cashers check. Thank you.
Mori Seiki SL-1H CNC Lathe w/ Fanuc 6T Controls - Turning Center - SL1
Mori Seiki CNC Turning Center Lathe Machine Model: SL-1H Specifications: 4" 3 JAW CHUCK TAILSTOCK Fanuc 6T Controller Module S/N 967 Contact Justin at 503.464.6013 with any questions. Located in Lombard. IL. Buyer responsible for any required skidding or crating charges. WORLDWIDE FREIGHT SHIPPING AND PACKAGING COSTS TO BE DETERMINED BY DESTINATION. Please read the terms and conditions below so that you understand how all our items are sold. Payment Options: ALL PAYMENTS ARE EXPECTED WITHIN 48 HOURS OF AUCTION CLOSE. WE UNDERSTAND THAT THERE ARE EXCEPTIONS. BUT COMMUNICATION IS KEY. PLEASE DO NOT BID IF YOU CANNOT PAY FOR THIS ITEM IN A TIMELY MANNER. Shipping Options: Smaller Items: Minimum shipping charge of $15.00. Items over $500. Must be insured at the buyers expense of $0.50, per $100. Freight Items: The buyer is responsible for ... morecoordinating shipment and is responsible for all freight and rigging(if required) costs. We can arrange freight shipments. You will be billed exactly as quoted by my freight forward. With no mark-up, however at times this may be more than the cost of the actual item. Please ask for a quote prior to bidding, so there are no surprises. Freight items typically require payment by bank wire transfer or certified funds, since shipments and delivery confirmations typically do not conform with Paypal requirements. Local Pick-Ups: This option is available on many auctions. However we are not always on-site where the item is located. Please inquire before bidding. Typically there will be no additional charge for a local pick-up. However some larger items may require an additional rigging fee upon pick-up. Terms and Conditions: Most items that we sell are from plant closures and business liquidations. We typically wholesale directly from the facility closure. This means the items are still or have very recently been in production and under power. We strive to only sell quality items and do the best job possible in describing the items accurately. All items are sold as-pictured. Where-is.
Turret for Mori Seiki CNC Lathe ZL-15
Turret for Mori Seiki CNC Lathe ZL-15 Item Sold As Is This item is available for local pick up only. If shipping is desired. It will be at buyers expense. Payment is required within 48 hours of making purchase.
Mori Seiki Parts List for MS High Speed Precision Lathe (Inv.17935)
Mori Seiki Parts List for MS High Speed Precision Lathe: You are bidding on"A COPY" of the manual shown in the photo. Loc.5306)Inv.17935) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international ... moremoney order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
Mori Seiki Operation Manual High Speed Precision Lathe:MR/MH/MH-3000 (Inv 17903)
Mori Seiki Operation Manual for High Speed Precision Lathe: MR/MH/MH-3000 Type You are bidding on A"COPY" of the manual in the photo. Inv.17928)Loc.5126) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international ... moresales are subject to a $15 surcharge in addition to normal shipping and handling costs. Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
Mori Seiki Parts List for SL-3 Type:
Mori Seiki Parts List for SL-3 Type: You are bidding on A COPY of the manual shown in the photo. Inv.1 7925)Loc.6503) We also have sales brochures and literature for many different kinds of machines. Due to a lower demand for these. We don't list them on ebay, but feel free to email us with any requested machine models and we'll check our files. Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject ... moreto prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
Mori Seiki TL-2 Tailstock
Mori Seiki TL-2 Tailstock This item is available for local pick up only. If shipping is desired. It will be at buyers expense. Payment is required within 48 hours of making purchase.
Mori Seiki TL-2 8 Station Tool Turret
Mori Seiki TL-2 8 Station Tool Turret This item is available for local pick up only. If shipping is desired. It will be at buyers expense. Payment is required within 48 hours of making purchase.
KITAMURA MYCENTER BROCHURE / QUOTE FROM 1st STOCKING MORI SEIKI DEALER IN GA.
KITAMURA MYCENTER MACHINING CENTER BROCHURE/ QUOTE WITH MACHINE SPECS FROM 1st STOCKING MORI SEIKI DEALER IN GA. GOOD CONDITION. 1981. FELL IN LOVE WITH CNC MACHINE TOOLS IN 70's& 80's- I PROGRAMMED EM. I RAN EM, I FINANCED EM, AND I SOLD EM. AT 66 GUESS I'M HAVE A PRE DEATH ESTATE SALE. SHIPPING& PAYMENT POLICIES 1. COMBINED SHIPPING. IF YOU PLAN ON PURCHASING MULTIPLE ITEMS DO NOT PAY UNTIL WE SEND YOU AN eBAY INVOICE WITH YOUR COMBINED ITEMS AND COMBINED SHIPPING ON ITEMS PURCHASED WITHIN A 3 DAY PERIOD. EBAY WILL NOT ALLOW AN ITEM TO REINVOICED AFTER A BIDDER PAYS FOR THAT ITEM. IF YOU DO PAY FOR AN ITEM. THAT ITEM CANNOT BE RECOMBINED IN AN INVOICE. WE DO NOT REQUIRE IMMEDIATE PAYMENT ON FIXED PRICE ITEMS. SO WAIT FOR OUR INVOICE IF YOU WANT COMBINED SHIPPING. 2. SHIPPING NOTICE A SHIPPING NOTICE WITH TRACKING LINKS ... moreWILL BE SENT FROM GMCPSHIP at BELLSOUTH.NET UPON SHIPMENT TO THE EMAIL ADDRESS FROM WHICH PAYMENT IS RECEIVED. SORRY WE WILL NOT APPLY TO BE ADDED TO YOUR EMAIL LIST. SO IF YOU HAVE A SPAM BLOCKER ON YOU MAY NOT RECEIVE THE SHIPPING NOTICE OR ANY EMAILED RESPONSES. WE DO NOT NOTE RECEIPT OF PAYMENT OR TRACKING INFORMATION ON EBAY. WE DO NOT UPDATE EBAY TO REFLECT RECEIPT OF PAYMENT NOR WITH TRACKING INFORMATION 3. SHIP TO ADDRESS WE SHIP ONLY TO THE ADDRESS PROVIDED WITH YOUR PAYMENT NOTICE. WE WILL NOT SHIP TO 3 RD PARTIES. WE CANNOT HONOR EMAILED REQUESTS FOR CHANGES TO SHIP TO ADDRESS. IF YOU HAVE ANY QUESTIONS ABOUT THIS POLICY PLEASE READ PAYPAL’S POLICES RE SELLER PROTECTION. IF YOUR ITEM IS RETURNED BECAUSE YOUR PAYMENT NOTICE CONTAINED AN INCORRECT ADDRESS. YOU WILL BE INVOICED VIA PAYPAL FOR RESHIPPING. BE SURE YOUR PAYPAL OR CREDIT CARD ADDRESS IS CORRECT. 4. LOCAL PICK UP IS AVAILABLE BY APPOINTMENT MON-THUR 1PM- 1AM. LOCATED IN BOWDON. GA- 10 MILES OFF I 20 WEST LAST EXIT IN GA. CASH UPON DELIVERY IS ACCEPTABLE. 5. HANDLING TIME. ITEMS LISTED WITH UPS SHIPPING ARE SHIPPED ONCE A WEEK ON FRIDAYS. UPS ITEMS PAID FOR ON THURSDAYS& FRIDAYS SHIP THE FOLLOWING WEEK O
MORI SEIKI TL-5 BROCHURE / QUOTE FROM 1st STOCKING DEALER IN GA.
MORI SEIKI TL-5 BROCHURE/ QUOTE WITH MACHINE SPECS FROM 1st STOCKING MORI SEIKI DEALER IN GA. GOOD CONDITION. 1981. FELL IN LOVE WITH CNC MACHINE TOOLS IN 70's& 80's- I PROGRAMMED EM. I RAN EM, I FINANCED EM, AND I SOLD EM. AT 66 GUESS I'M HAVE A PRE DEATH ESTATE SALE. SHIPPING& PAYMENT POLICIES 1. COMBINED SHIPPING. IF YOU PLAN ON PURCHASING MULTIPLE ITEMS DO NOT PAY UNTIL WE SEND YOU AN eBAY INVOICE WITH YOUR COMBINED ITEMS AND COMBINED SHIPPING ON ITEMS PURCHASED WITHIN A 3 DAY PERIOD. EBAY WILL NOT ALLOW AN ITEM TO REINVOICED AFTER A BIDDER PAYS FOR THAT ITEM. IF YOU DO PAY FOR AN ITEM. THAT ITEM CANNOT BE RECOMBINED IN AN INVOICE. WE DO NOT REQUIRE IMMEDIATE PAYMENT ON FIXED PRICE ITEMS. SO WAIT FOR OUR INVOICE IF YOU WANT COMBINED SHIPPING. 2. SHIPPING NOTICE A SHIPPING NOTICE WITH TRACKING LINKS WILL BE SENT FROM ... moreGMCPSHIP at BELLSOUTH.NET UPON SHIPMENT TO THE EMAIL ADDRESS FROM WHICH PAYMENT IS RECEIVED. SORRY WE WILL NOT APPLY TO BE ADDED TO YOUR EMAIL LIST. SO IF YOU HAVE A SPAM BLOCKER ON YOU MAY NOT RECEIVE THE SHIPPING NOTICE OR ANY EMAILED RESPONSES. WE DO NOT NOTE RECEIPT OF PAYMENT OR TRACKING INFORMATION ON EBAY. WE DO NOT UPDATE EBAY TO REFLECT RECEIPT OF PAYMENT NOR WITH TRACKING INFORMATION 3. SHIP TO ADDRESS WE SHIP ONLY TO THE ADDRESS PROVIDED WITH YOUR PAYMENT NOTICE. WE WILL NOT SHIP TO 3 RD PARTIES. WE CANNOT HONOR EMAILED REQUESTS FOR CHANGES TO SHIP TO ADDRESS. IF YOU HAVE ANY QUESTIONS ABOUT THIS POLICY PLEASE READ PAYPAL’S POLICES RE SELLER PROTECTION. IF YOUR ITEM IS RETURNED BECAUSE YOUR PAYMENT NOTICE CONTAINED AN INCORRECT ADDRESS. YOU WILL BE INVOICED VIA PAYPAL FOR RESHIPPING. BE SURE YOUR PAYPAL OR CREDIT CARD ADDRESS IS CORRECT. 4. LOCAL PICK UP IS AVAILABLE BY APPOINTMENT MON-THUR 1PM- 1AM. LOCATED IN BOWDON. GA- 10 MILES OFF I 20 WEST LAST EXIT IN GA. CASH UPON DELIVERY IS ACCEPTABLE. 5. HANDLING TIME. ITEMS LISTED WITH UPS SHIPPING ARE SHIPPED ONCE A WEEK ON FRIDAYS. UPS ITEMS PAID FOR ON THURSDAYS& FRIDAYS SHIP THE FOLLOWING WEEK ON FRIDAY. ITEMS SH
FANUC 6M CNC OPERATORS MANUAL FROM 1st STOCKING MORI SEIKI DEALER IN GA.
FANUC 6M CNC OPERATORS MANUAL FROM 1st STOCKING MORI SEIKI DEALER IN GA. GOOD CONDITION. DATES TO 1980-1984. FELL IN LOVE WITH CNC MACHINE TOOLS IN 70's& 80's- I PROGRAMMED EM. I RAN EM, I FINANCED EM, AND I SOLD EM. AT 66 GUESS I'M HAVE A PRE DEATH ESTATE SALE. SHIPPING& PAYMENT POLICIES 1. COMBINED SHIPPING. IF YOU PLAN ON PURCHASING MULTIPLE ITEMS DO NOT PAY UNTIL WE SEND YOU AN eBAY INVOICE WITH YOUR COMBINED ITEMS AND COMBINED SHIPPING ON ITEMS PURCHASED WITHIN A 3 DAY PERIOD. EBAY WILL NOT ALLOW AN ITEM TO REINVOICED AFTER A BIDDER PAYS FOR THAT ITEM. IF YOU DO PAY FOR AN ITEM. THAT ITEM CANNOT BE RECOMBINED IN AN INVOICE. WE DO NOT REQUIRE IMMEDIATE PAYMENT ON FIXED PRICE ITEMS. SO WAIT FOR OUR INVOICE IF YOU WANT COMBINED SHIPPING. 2. SHIPPING NOTICE A SHIPPING NOTICE WITH TRACKING LINKS WILL BE SENT FROM GMCPSHIP ... moreat BELLSOUTH.NET UPON SHIPMENT TO THE EMAIL ADDRESS FROM WHICH PAYMENT IS RECEIVED. SORRY WE WILL NOT APPLY TO BE ADDED TO YOUR EMAIL LIST. SO IF YOU HAVE A SPAM BLOCKER ON YOU MAY NOT RECEIVE THE SHIPPING NOTICE OR ANY EMAILED RESPONSES. WE DO NOT NOTE RECEIPT OF PAYMENT OR TRACKING INFORMATION ON EBAY. WE DO NOT UPDATE EBAY TO REFLECT RECEIPT OF PAYMENT NOR WITH TRACKING INFORMATION 3. SHIP TO ADDRESS WE SHIP ONLY TO THE ADDRESS PROVIDED WITH YOUR PAYMENT NOTICE. WE WILL NOT SHIP TO 3 RD PARTIES. WE CANNOT HONOR EMAILED REQUESTS FOR CHANGES TO SHIP TO ADDRESS. IF YOU HAVE ANY QUESTIONS ABOUT THIS POLICY PLEASE READ PAYPAL’S POLICES RE SELLER PROTECTION. IF YOUR ITEM IS RETURNED BECAUSE YOUR PAYMENT NOTICE CONTAINED AN INCORRECT ADDRESS. YOU WILL BE INVOICED VIA PAYPAL FOR RESHIPPING. BE SURE YOUR PAYPAL OR CREDIT CARD ADDRESS IS CORRECT. 4. LOCAL PICK UP IS AVAILABLE BY APPOINTMENT MON-THUR 1PM- 1AM. LOCATED IN BOWDON. GA- 10 MILES OFF I 20 WEST LAST EXIT IN GA. CASH UPON DELIVERY IS ACCEPTABLE. 5. HANDLING TIME. ITEMS LISTED WITH UPS SHIPPING ARE SHIPPED ONCE A WEEK ON FRIDAYS. UPS ITEMS PAID FOR ON THURSDAYS& FRIDAYS SHIP THE FOLLOWING WEEK ON FRIDAY. ITEMS SHIPPING V
MORI SEIKI SL-5 BROCHURE / QUOTE FROM 1st STOCKING DEALER IN GA.
MORI SEIKI SL-5 BROCHURE/ QUOTE WITH MACHINE SPECS FROM 1st STOCKING MORI SEIKI DEALER IN GA. GOOD CONDITION. 1981. FELL IN LOVE WITH CNC MACHINE TOOLS IN 70's& 80's- I PROGRAMMED EM. I RAN EM, I FINANCED EM, AND I SOLD EM. AT 66 GUESS I'M HAVE A PRE DEATH ESTATE SALE. SHIPPING& PAYMENT POLICIES 1. COMBINED SHIPPING. IF YOU PLAN ON PURCHASING MULTIPLE ITEMS DO NOT PAY UNTIL WE SEND YOU AN eBAY INVOICE WITH YOUR COMBINED ITEMS AND COMBINED SHIPPING ON ITEMS PURCHASED WITHIN A 3 DAY PERIOD. EBAY WILL NOT ALLOW AN ITEM TO REINVOICED AFTER A BIDDER PAYS FOR THAT ITEM. IF YOU DO PAY FOR AN ITEM. THAT ITEM CANNOT BE RECOMBINED IN AN INVOICE. WE DO NOT REQUIRE IMMEDIATE PAYMENT ON FIXED PRICE ITEMS. SO WAIT FOR OUR INVOICE IF YOU WANT COMBINED SHIPPING. 2. SHIPPING NOTICE A SHIPPING NOTICE WITH TRACKING LINKS WILL BE SENT FROM ... moreGMCPSHIP at BELLSOUTH.NET UPON SHIPMENT TO THE EMAIL ADDRESS FROM WHICH PAYMENT IS RECEIVED. SORRY WE WILL NOT APPLY TO BE ADDED TO YOUR EMAIL LIST. SO IF YOU HAVE A SPAM BLOCKER ON YOU MAY NOT RECEIVE THE SHIPPING NOTICE OR ANY EMAILED RESPONSES. WE DO NOT NOTE RECEIPT OF PAYMENT OR TRACKING INFORMATION ON EBAY. WE DO NOT UPDATE EBAY TO REFLECT RECEIPT OF PAYMENT NOR WITH TRACKING INFORMATION 3. SHIP TO ADDRESS WE SHIP ONLY TO THE ADDRESS PROVIDED WITH YOUR PAYMENT NOTICE. WE WILL NOT SHIP TO 3 RD PARTIES. WE CANNOT HONOR EMAILED REQUESTS FOR CHANGES TO SHIP TO ADDRESS. IF YOU HAVE ANY QUESTIONS ABOUT THIS POLICY PLEASE READ PAYPAL’S POLICES RE SELLER PROTECTION. IF YOUR ITEM IS RETURNED BECAUSE YOUR PAYMENT NOTICE CONTAINED AN INCORRECT ADDRESS. YOU WILL BE INVOICED VIA PAYPAL FOR RESHIPPING. BE SURE YOUR PAYPAL OR CREDIT CARD ADDRESS IS CORRECT. 4. LOCAL PICK UP IS AVAILABLE BY APPOINTMENT MON-THUR 1PM- 1AM. LOCATED IN BOWDON. GA- 10 MILES OFF I 20 WEST LAST EXIT IN GA. CASH UPON DELIVERY IS ACCEPTABLE. 5. HANDLING TIME. ITEMS LISTED WITH UPS SHIPPING ARE SHIPPED ONCE A WEEK ON FRIDAYS. UPS ITEMS PAID FOR ON THURSDAYS& FRIDAYS SHIP THE FOLLOWING WEEK ON FRIDAY. ITEMS SH
KITAMURA S-12 BROCHURE / QUOTE FROM 1st STOCKING MORI SEIKI DEALER IN GA.
KITAMURA S-12 MACHINING CENTER BROCHURE/ QUOTE WITH MACHINE SPECS FROM 1st STOCKING MORI SEIKI DEALER IN GA. GOOD CONDITION. 1981. FELL IN LOVE WITH CNC MACHINE TOOLS IN 70's& 80's- I PROGRAMMED EM. I RAN EM, I FINANCED EM, AND I SOLD EM. AT 66 GUESS I'M HAVE A PRE DEATH ESTATE SALE. SHIPPING& PAYMENT POLICIES 1. COMBINED SHIPPING. IF YOU PLAN ON PURCHASING MULTIPLE ITEMS DO NOT PAY UNTIL WE SEND YOU AN eBAY INVOICE WITH YOUR COMBINED ITEMS AND COMBINED SHIPPING ON ITEMS PURCHASED WITHIN A 3 DAY PERIOD. EBAY WILL NOT ALLOW AN ITEM TO REINVOICED AFTER A BIDDER PAYS FOR THAT ITEM. IF YOU DO PAY FOR AN ITEM. THAT ITEM CANNOT BE RECOMBINED IN AN INVOICE. WE DO NOT REQUIRE IMMEDIATE PAYMENT ON FIXED PRICE ITEMS. SO WAIT FOR OUR INVOICE IF YOU WANT COMBINED SHIPPING. 2. SHIPPING NOTICE A SHIPPING NOTICE WITH TRACKING LINKS WILL ... moreBE SENT FROM GMCPSHIP at BELLSOUTH.NET UPON SHIPMENT TO THE EMAIL ADDRESS FROM WHICH PAYMENT IS RECEIVED. SORRY WE WILL NOT APPLY TO BE ADDED TO YOUR EMAIL LIST. SO IF YOU HAVE A SPAM BLOCKER ON YOU MAY NOT RECEIVE THE SHIPPING NOTICE OR ANY EMAILED RESPONSES. WE DO NOT NOTE RECEIPT OF PAYMENT OR TRACKING INFORMATION ON EBAY. WE DO NOT UPDATE EBAY TO REFLECT RECEIPT OF PAYMENT NOR WITH TRACKING INFORMATION 3. SHIP TO ADDRESS WE SHIP ONLY TO THE ADDRESS PROVIDED WITH YOUR PAYMENT NOTICE. WE WILL NOT SHIP TO 3 RD PARTIES. WE CANNOT HONOR EMAILED REQUESTS FOR CHANGES TO SHIP TO ADDRESS. IF YOU HAVE ANY QUESTIONS ABOUT THIS POLICY PLEASE READ PAYPAL’S POLICES RE SELLER PROTECTION. IF YOUR ITEM IS RETURNED BECAUSE YOUR PAYMENT NOTICE CONTAINED AN INCORRECT ADDRESS. YOU WILL BE INVOICED VIA PAYPAL FOR RESHIPPING. BE SURE YOUR PAYPAL OR CREDIT CARD ADDRESS IS CORRECT. 4. LOCAL PICK UP IS AVAILABLE BY APPOINTMENT MON-THUR 1PM- 1AM. LOCATED IN BOWDON. GA- 10 MILES OFF I 20 WEST LAST EXIT IN GA. CASH UPON DELIVERY IS ACCEPTABLE. 5. HANDLING TIME. ITEMS LISTED WITH UPS SHIPPING ARE SHIPPED ONCE A WEEK ON FRIDAYS. UPS ITEMS PAID FOR ON THURSDAYS& FRIDAYS SHIP THE FOLLOWING WEEK ON FR
Mori Seiki M300L VMC 1995, Fanuc MF-M6 Control, 6k RPM, 30ATC, Chip Auger
Mori Seiki M300L VMC 1995 Fanuc MF-M6 CNC Control CAT 40 Taper 6000RPM 30-ATC Chip Auger. Category: CNC Machining Centers Sub Category: Vertical CNC Stock No. 4685 Age: 1995 Serial# 115 Location: Fullerton. CA. Table Size(2) 32.7" x 21.3" Table Surface Configuration 0.7" 5 T-slots Table Loading Capacity 1.540 x 2 X-Axis Travels 63" 23.6" x 2 Y-Axis Travels 19.7" Z-Axis Travels 18.5" Dist. Table Surface- Spindle Gage 3.9" 22.4" Dist. ATC Cover- Spindle Center 4.3" 24.0" Dist. Floor- Table Upper Surface 32.3" Spindle Speeds 100-6000 RPM Spindle Taper CAT 40 Rapid Traverse Rate 944.9 ipm Cutting Feed Rate.00001- 196.9" Jog Feed Rate 0- 50" Automatic Tool Changer 30 Position Max. Tool Diameter 4.9" Max. Tool Length 9.8" Max. Tool Capacity 17.6 lbs. Spindle Drive Motor ... more10 HP Coolant Tank Capacity 50 gal. Approx. Dimensions 124.4" x 119.5" x 108.3" Approx. Weight 19.800 lbs. Equipped With: CAT 40 Taper. 30-ATC, and Chip Auger. Price… $27.500.00 PLEASE SEE TERMS AND CONDITIONS BELOW Machines are subject to ACT Inc’s terms& conditions below and notes: The goods sold are second hand goods and ACT. Inc. Therefore makes no warranty of any kind, and sells goods“As is, As inspected, And“With all faults” ACT, Inc. makes no warranty of any kind whatsoever, specifically any warranty of merchantability or fitness for a particular purpose. ACT, Inc. disclaims any reliance by buyer on ACT Inc’s skill, or judgment to select or furnish the goods for any particular purpose, expressed or implied. Customer is responsible for all shipping& rigging costs. STANDARD TERMS AND CONDITIONS OF SALE TERMS: All payments must be received within 10 business and prior to shipment of machine. All sales in CA are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and
Mori Seiki M300L VMC 1992, Fanuc MF-M4 Control, 6000RPM, CAT 40 Taper, 30ATC
Mori Seiki M300L VMC 1992 Fanuc MF-M4 CNC Control 6000 RPM CAT 40 Taper 30 ATC Chip Auger Category: CNC Machining Centers Sub Category: Vertical CNC Stock No. 4684 Age: 1992 Serial# 48 Location: Fullerton. CA. Table Size(2) 32.7" x 21.3" Table Surface Configuration 0.7" 5 T-Slots Table Loading Capacity 1540 lbs. x 2 X-Axis Travels 63" 23.6" x 2 Y-Axis Travels 19.7" Z-Axis Travels 18.5" Dist. Table Surface- Spindle Gage 3.9" 22.4" Dist. ATC Cover- Spindle Center 4.3" 24.0" Dist. Floor- Table Upper Surface 32.3" Spindle Speeds 100-6000 RPM Spindle Taper CAT 40 Rapid Traverse 944.9 ipm Cutting Feedrate 0.00001- 196.9" Jog Feed Rate 0- 50" Automatic Tool Changer 30 Max. Tool Diameter 4.9" Max. Tool Length 9.8" Max. Tool Capacity 17.6 lbs. Spindle Drive Motor 10 HP ... moreCoolant Tank Capacity 50 Gal. Approx. Dimensions 124.4" x 119.5" x 108.3" Approx. Weight 19.800 lbs. Equipped With: CAT 40 Taper. 30-ATC, and Chip Auger. Price… $27.500.00 PLEASE SEE TERMS AND CONDITIONS BELOW Machines are subject to ACT Inc’s terms& conditions below and notes: The goods sold are second hand goods and ACT. Inc. Therefore makes no warranty of any kind, and sells goods“As is, As inspected, And“With all faults” ACT, Inc. makes no warranty of any kind whatsoever, specifically any warranty of merchantability or fitness for a particular purpose. ACT, Inc. disclaims any reliance by buyer on ACT Inc’s skill, or judgment to select or furnish the goods for any particular purpose, expressed or implied. Customer is responsible for all shipping& rigging costs. STANDARD TERMS AND CONDITIONS OF SALE TERMS: All payments must be received within 10 business and prior to shipment of machine. All sales in CA are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such
MORI SEIKI SL-1A MORI-YASNAC CNC LATHE INSTRUCTION MANUAL
Mori Seiki CNC Lathe SL-1A(Mori- Yasnac) Instruction Manual This auction is for a Instruction Manual for the Mori Seiki CNC Lathe- Mori Yasnac. See the pictures for an idea of the shape and condition of this item. The conditio n is very good. No pages appear to be missing. Expect some handwriting and grease smears. Both covers are present. Approximately 356 pages. Shipping Weight 3 pounds Email me with any questions you may have. Thanks for looking and Good Luck.
MORI SEIKI MS 850 HIGH SPEED SUPER PRECISION LATHE 17" X 36" WITH TOOLING
MORI SEIKI MS 850 HIGH SPEED SUPER PRECISION LATHE WITH TOOLING SUPER CLEAN. WELL ABOVE AVARAGE CONDITION, BED WAYS SHOW ALMOST NO WEAR. CROSS FEED SCREW HAS VERY LITTLE BACK LASH. ORIGINAL CROSS FEED SCREW AND NUT SET, APRON MOVES SMOOTH FROM HEADSTOCK TO TAIL STOCK. EVERYTHING ON LATHE WORKS GREAT. MACHINE WAS UNPLUGED FOR 20 YEARS. TOOLING, 10" 3 JAW AND 12" 4 JAW. STEADY REST, THIS IS ONE OF THE LAST REALLY CLEAN MORI'S OUT THERE SELLING FOR ONLY $ 15.500.00 CALL CALL AT WEBB MACHINERY. CORONA, CA 951/277-8885
MORI SEIKI MV40B HIGH SPEED VERTICAL MACHINING CENTER
MORI SEIKI MV40B in excellent condition. Year 2002. We replaced the 20.000 RPM spindle last year and this machine runs great. It holds tenths in tolerance for hours. We are reconfiguring our shop and are surplussing due to space constraints. Our loss is your gain. SPECS: TRAVEL 31.5 X 16.1 Y 20.1 Z TABLE LOAD 1540 LB TABLE SIZE 43.3 X 17.7 FANUC 16M control 3 axis RAPID 787 XY 591 Z rigid tapping cutting feedrate.1-197 ipm BT 40 spindle can be changed to CAT 40 20 STATION ARM CHANGER TOOLCHANGER 1.5 second toolchange 17.6 lb max tool weight has a spindle chiller spindle speed 20000 rpm spindle was done professionally by SETCO and is trouble free and super quiet SPINDLE MOTOR 10 HP. This machine has a lot of power despite the lower horsepower.It acts like 20HP! machine weight about 14200 lb footprint about 108 wide by 90 deep by 103 inch tall ... morecomplete manuals Includes some toolholders Includes 3 anglelock vises but may not be ones shown as our vises are swapped around because of 4th axis use payment by wire transfer or company check acceptable This is a great machine and we do welcome in person inspections and welcome running your parts on it. This machine is for sale with a dealer too so may be sold at any time and may not be available.
Mori Seiki MV-40 CNC Vertical Mill with 4th Axis
Mori Seiki MV-40 VCM with 4th axis Specifications and Capacities: Table size 35.43 x 17.72 Max weight on table 27.56 X axis travel 23.62 Y axis travel 16.14 Z axis travel 20.08 Rapid traverse rate 787.40 Cutting feed rate 0.1-197 ipm Spindle max speed 8000 rpm Spindle 10 hp Number of speed ranges 2 Spindle hole taper cat 40 Tool changer 20 tools Weight 12.430 lbs Equipped With: Yasnac Mx3 4th axis ready Spindle chiller coolant system RS-232 port 220 v 3ph Machine available for inspection under power by appointment Link to see machine running ALL ITEMS ARE SOLD AS IS. WHERE IS stock#3584. BUYER IS RESPONSIBLE FOR ALL FREIGHT ARRANGEMENTS AND COST.
MORI SEIKI YASKAWA RELAY RI-D25M OR RI-D25MU
THIS AUCTION IS FOR A USED WORKING MORI SEIKI YASKAWA RELAY RI-D25M WILL WORK WITH RI-D25MU RI-D25MI. COIL 24VDC. FULLY TESTED. Please read all terms before bidding. Warranty: Buy it now. comes with a 10 day warranty unless stated sold as is. Make offer. comes with a standard 7 day not DOA warranty unless stated sold as is. CNC REPAIR/ SERVICES OFFER YOU PARTS AND SERVICE AT DISCOUNTED RATES FOR YOUR MACHINE TOOL. WILL TRAVEL ALL OVER USA. WE HAVE BEEN IN THE SERVICE AND PARTS BUSINESS FOR OVER 20 YEARS. CONTACT US WHEN YOU NEED SERVICE DONE OR CONTACT US FOR P.M WORK. WE ARE FULL SERVICE. WE STOCK A LARGE SUPPLY OF PARTS NOT ALL ARE LISTED ON THIS SITE SO IF YOU DON'T SEE IT ASK WE MAY HAVE OR BE ABLE TO GET IT FOR YOU. SHIPPING: I USE FEDEX AND USPS ONLY FOR SHIPPING. NEXT DAY OR SECOND DAY SHIPPING IS AVAILABLE APON REQUEST. PLEASE ... moreCONTACT ME AT BEFORE REQUESTING THESE SERVICES THERE IS A DEADLINE. JOHN
1-3/4" MORI SEIKI CNC LATHE ID TURRET TOOL BLOCK TL40 TL5
MORI SEIKI TURRET TOOL BLOCK 80MM x 110MM BOLT HOLE SPACING 1-3/4" BORE Very good used condition. As pictured. Feel free to give us a call at 440-343-4419 for more information to be sure that these will work for your application. Payment due within seven days of purchase. Check. M/o, and PayPal accepted. $11.50 for USPS Priority Mail shipping with delivery confirmation. Thanks for looking!
MORI SEIKI TOOLING SL3 SL4 TOOL HOLDER TOOLHOLDER D*
Check out my! MORI SEIKI TOOLING SL3 SL4 TOOL HOLDER Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT ... moreUS BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret punch, welder, tube bender and e.t.c. Whether you are in the market to sell your surplus equipment or purchase that hard to find machine, we have a knowledgeable staff that will strive to deliver quality products and services based on your needs,
mori seiki coolant pump,Weg pump :3 phase
Weg rebuilt coolant pump/motor- 3 phase- This listing is for Weg completely rebuilt coolant pump/motor. If memory serves(which which has become suspect of late) This was a replacement pump for my Mori seiki Lathe. I sold my lathe about four years ago. This was rebuilt probably five years before that. At a cost of over $600. Some dimensions you cannot tell from the pictures. The mounting plate as a 4 X 2 inch bolt circle(265 holes) A 3/4 NPT outlet. From the top of the pump mounting plate to the bottom of the pump is 6.900 inches. If you have a Mori seiki lathe and this is not the correct mounting dimensions or you know what it would fit I would appreciate any feed back so I could correctly list it. This motor is presently wired for 220 volts 3 phase. A good electrician will always pull the access cover and check the wiring before applying ... morepower. If there is any other dimensions or information you need please e-mail me through eBay and I'll be happy to get them for you. Because this is electrical and I have seen electricians hook motors up to the wrong voltage I cannot guarantee this beyond not DOA. To protect myself I will take pictures of the OHM readings on all three legs before I ship it. SHIPPING TO USA ONLY! Excludes Hawaii.Alaska& Puerto Rico Terms of Sale Pictures are of the actual item. UNLESS OTHERWISE SPECIFIED. No accessories or manuals included unless otherwise pictured and stated above. I try to give accurate descriptions of my items. However, I use the description from the manufacturer and these descriptions may or may not be entirely accurate. I an not responsible for these inaccuracies. All items are sold-as-is. No warranty, expressed or implied on this item. Most items offered for sale are used and may contain defects not immediately detectable. I am a surplus equipment dealers and do not have the ability or expertise to test equipment for functionality beyond plugging it in and ensuring it powers up/ on. Unless otherwise stated. Please look closely at pictures. Only items shown are
MORI SEIKI 6 1/2" MODEL HA5-6II 3 JAW LATHE CHUCK
MORI SEIKI 6 1/2" MODEL HA5-6II 3 JAW LATHE CHUCK MORI SEIKI 6 1/2" MODEL HA5-6II 3 JAW LATHE CHUCK PLEASE EMAIL ME WITH ANY QUESTIONS All purchases are expected to be payed within 5 business days. All Items will be shipped USPS/ UPS Ground or FEDEX Ground We do not ship to P.O. Box Buyer is responsible to pay"DUTY& TAXES" if shipped internationally. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD"AS IS" WITH NO WARRANTY UNLESS SPECIFIED DIFFERENTLY IN LISTING. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. Please feel free to email us with any questions you may have.
MORI SEIKI CNC LATHE TAILSTOCK
MORI SEIKI CNC LATHE TAILSTOCK APPROX. 12-1/2" CENTER HEIGHT APPROX. 8-1/2" FROM CENTER OF FLAT TO CENTER OF"V" NO.4 MORSE TAPER QUILL. Appears in good used condition. Comes as pictured. Exact model unknown. Please call us at 440-343-4419 for more info. Payment due within seven days of purchase. Check. M/o, and PayPal Accepted. Winning bidder pays actual shipping cost. Thanks for looking!
MORI SEIKI SPINDLE TOOL KNOCK OUT KNOCKOUT
Check out my! MORI SEIKI MV 45/40 SPINDLE TOOL KNOCKOUT THIS IS IN GREAT WORKING CONDITION. REMOVED FROM A MAZAK MACHINE. Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in great working condition, tested USED. But in good working condition. USED. SOLD AS IS DETAILS: 30 DAY MONEY BACK Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending ... morethe payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turr
MORI SEIKI MV 45/40 SPINDLE TOOL KNOCK OUT KNOCKOUTT
MORI SEIKI MV 45/40 Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept paypal payments under $200 only. Accommodations can be made for larger paypal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by thru ebay. WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. BUYER PAYS FOR SHIPPING. If payment is not received within 7 days. LEOPARD MACHINE ... moreSALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret punch, welder, tube bender and e.t.c. Whether you are in the market to sell your surplus equipment or purchase that hard to find machine, we have a knowledgeable staff that will strive to deliver quality products and services based on your needs, and assist you from start to finish. We don't just want your busines
MORI SEIKI FUSE BOARD CIRCUIT \
Check out my! MORI SEIKI FUSE BOARD THIS IS IN GREAT WORKING CONDITION. Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in great working condition, tested USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: 30 DAYS EXCHANGE WARRANTY Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment ... moreplease contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. FREE SHIPPING TO ALL 48 STATES. FOR INTERNATIONAL SHIPPING COSTS PLEASE E-MAIL US. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret punch, welder, tub
Mori Seiki SL/ZL-15 T32029A Right Angle Tapping Head
You are bidding on(1) Mori Seiki Right Angle Tapping Head toolholder from a Mori Seiki ZL-15SMC. It will fit SL-15M's and maybe other machines but I am not certain. The toolholder is in excellent condition and it appears as if it has not been used. If you have any questions please email them. Mori Seiki KSC T32029A Toolholder
SL-4 Mori Seiki Boring Bar Turret Holders - Quantity 2
SL-4 MORI SEIKI TURRET BORING BAR HOLDERS WITH 1.75" I.D. AND 2.75" BOTTOM PLUG FREIGHT IS INCLUDED
MORI SEIKI SL-7 BROCHURE JAPANESE VERSION 1984. FROM 1st STOCKING DEALER IN GA.
MORI SEIKI SL-7 BROCHURE JAPANESE VERSION 1984. FROM 1st STOCKING MORI SEIKI DEALER IN GA. GOOD CONDITION. FELL IN LOVE WITH CNC MACHINE TOOLS IN 70's& 80's- I PROGRAMMED EM. I RAN EM, I FINANCED EM, AND I SOLD EM. AT 66 GUESS I'M HAVE A PRE DEATH ESTATE SALE. SHIPPING& PAYMENT POLICIES 1. COMBINED SHIPPING. IF YOU PLAN ON PURCHASING MULTIPLE ITEMS DO NOT PAY UNTIL WE SEND YOU AN eBAY INVOICE WITH YOUR COMBINED ITEMS AND COMBINED SHIPPING ON ITEMS PURCHASED WITHIN A 3 DAY PERIOD. EBAY WILL NOT ALLOW AN ITEM TO REINVOICED AFTER A BIDDER PAYS FOR THAT ITEM. IF YOU DO PAY FOR AN ITEM. THAT ITEM CANNOT BE RECOMBINED IN AN INVOICE. WE DO NOT REQUIRE IMMEDIATE PAYMENT ON FIXED PRICE ITEMS. SO WAIT FOR OUR INVOICE IF YOU WANT COMBINED SHIPPING. 2. SHIPPING NOTICE A SHIPPING NOTICE WITH TRACKING LINKS WILL BE SENT FROM GMCPSHIP ... moreat BELLSOUTH.NET UPON SHIPMENT TO THE EMAIL ADDRESS FROM WHICH PAYMENT IS RECEIVED. SORRY WE WILL NOT APPLY TO BE ADDED TO YOUR EMAIL LIST. SO IF YOU HAVE A SPAM BLOCKER ON YOU MAY NOT RECEIVE THE SHIPPING NOTICE OR ANY EMAILED RESPONSES. WE DO NOT NOTE RECEIPT OF PAYMENT OR TRACKING INFORMATION ON EBAY. WE DO NOT UPDATE EBAY TO REFLECT RECEIPT OF PAYMENT NOR WITH TRACKING INFORMATION 3. SHIP TO ADDRESS WE SHIP ONLY TO THE ADDRESS PROVIDED WITH YOUR PAYMENT NOTICE. WE WILL NOT SHIP TO 3 RD PARTIES. WE CANNOT HONOR EMAILED REQUESTS FOR CHANGES TO SHIP TO ADDRESS. IF YOU HAVE ANY QUESTIONS ABOUT THIS POLICY PLEASE READ PAYPAL’S POLICES RE SELLER PROTECTION. IF YOUR ITEM IS RETURNED BECAUSE YOUR PAYMENT NOTICE CONTAINED AN INCORRECT ADDRESS. YOU WILL BE INVOICED VIA PAYPAL FOR RESHIPPING. BE SURE YOUR PAYPAL OR CREDIT CARD ADDRESS IS CORRECT. 4. LOCAL PICK UP IS AVAILABLE BY APPOINTMENT MON-THUR 1PM- 1AM. LOCATED IN BOWDON. GA- 10 MILES OFF I 20 WEST LAST EXIT IN GA. CASH UPON DELIVERY IS ACCEPTABLE. 5. HANDLING TIME. ITEMS LISTED WITH UPS SHIPPING ARE SHIPPED ONCE A WEEK ON FRIDAYS. UPS ITEMS PAID FOR ON THURSDAYS& FRIDAYS SHIP THE FOLLOWING WEEK ON FRIDAY. ITEMS SHIPPING VI
MORI SEIKI TAIL STOCK SPECIFICATIONS - 1984. FROM 1st STOCKING DEALER IN GA.
MORI SEIKI TAIL STOCK SPECIFICATIONS- 1980. FROM 1st STOCKING MORI SEIKI DEALER IN GA. GOOD CONDITION. FELL IN LOVE WITH CNC MACHINE TOOLS IN 70's& 80's- I PROGRAMMED EM. I RAN EM, I FINANCED EM, AND I SOLD EM. AT 66 GUESS I'M HAVE A PRE DEATH ESTATE SALE. SHIPPING& PAYMENT POLICIES 1. COMBINED SHIPPING. IF YOU PLAN ON PURCHASING MULTIPLE ITEMS DO NOT PAY UNTIL WE SEND YOU AN eBAY INVOICE WITH YOUR COMBINED ITEMS AND COMBINED SHIPPING ON ITEMS PURCHASED WITHIN A 3 DAY PERIOD. EBAY WILL NOT ALLOW AN ITEM TO REINVOICED AFTER A BIDDER PAYS FOR THAT ITEM. IF YOU DO PAY FOR AN ITEM. THAT ITEM CANNOT BE RECOMBINED IN AN INVOICE. WE DO NOT REQUIRE IMMEDIATE PAYMENT ON FIXED PRICE ITEMS. SO WAIT FOR OUR INVOICE IF YOU WANT COMBINED SHIPPING. 2. SHIPPING NOTICE A SHIPPING NOTICE WITH TRACKING LINKS WILL BE SENT FROM GMCPSHIP at ... moreBELLSOUTH.NET UPON SHIPMENT TO THE EMAIL ADDRESS FROM WHICH PAYMENT IS RECEIVED. SORRY WE WILL NOT APPLY TO BE ADDED TO YOUR EMAIL LIST. SO IF YOU HAVE A SPAM BLOCKER ON YOU MAY NOT RECEIVE THE SHIPPING NOTICE OR ANY EMAILED RESPONSES. WE DO NOT NOTE RECEIPT OF PAYMENT OR TRACKING INFORMATION ON EBAY. WE DO NOT UPDATE EBAY TO REFLECT RECEIPT OF PAYMENT NOR WITH TRACKING INFORMATION 3. SHIP TO ADDRESS WE SHIP ONLY TO THE ADDRESS PROVIDED WITH YOUR PAYMENT NOTICE. WE WILL NOT SHIP TO 3 RD PARTIES. WE CANNOT HONOR EMAILED REQUESTS FOR CHANGES TO SHIP TO ADDRESS. IF YOU HAVE ANY QUESTIONS ABOUT THIS POLICY PLEASE READ PAYPAL’S POLICES RE SELLER PROTECTION. IF YOUR ITEM IS RETURNED BECAUSE YOUR PAYMENT NOTICE CONTAINED AN INCORRECT ADDRESS. YOU WILL BE INVOICED VIA PAYPAL FOR RESHIPPING. BE SURE YOUR PAYPAL OR CREDIT CARD ADDRESS IS CORRECT. 4. LOCAL PICK UP IS AVAILABLE BY APPOINTMENT MON-THUR 1PM- 1AM. LOCATED IN BOWDON. GA- 10 MILES OFF I 20 WEST LAST EXIT IN GA. CASH UPON DELIVERY IS ACCEPTABLE. 5. HANDLING TIME. ITEMS LISTED WITH UPS SHIPPING ARE SHIPPED ONCE A WEEK ON FRIDAYS. UPS ITEMS PAID FOR ON THURSDAYS& FRIDAYS SHIP THE FOLLOWING WEEK ON FRIDAY. ITEMS SHIPPING VIA US
Mori-Seiki DL-15 Fanuc Control
1996 MORI SEIKI MODEL DL-15 CNC TWIN SPINDLE TURNING CENTER, MF-D6 CNC CONTROLS(FANUC 16TT CONTROL) VIDEO 11” MAX SWING. 7.9” MAX MACHINING LENGTH, 1.7” BAR CAPACITY, 50 TO 5000-RPM SPINDLE. CHIP CONVEYOR. Runs Excellent Questions call Steve@ 866-803-5202 Shipping Quotes Contact Shipping Dimensions 10' x 8' x 6' 15000 lbs.
Komet SL-3 Mori Seiki Boring & Turning Holders & Heads
KOMET BORING& TURNING TOOLING PACKAGE FOR MORI SEIKI SL-3 CONSISTING OF: 5) KOMET TOOLHOLDERS- UA0110920-ABB-50N(1) KOMET TOOLHOLDER- A0125050ABS-50N(18) KOMET ASSORTED BORING& TURNING TOOLHEADS WITH 1.1" SHANK FREIGHT IS INCLUDED
ZL-15S MORI-SEIKI 4-AXIS CNC TURNING CENTER - #25619
QUOTE#25619. ZL-15S MORI-SEIKI 4-AXIS CNC TURNING CENTER New 1994. Serial No 427, Model ZL-15S EQUIPPED WITH: Mori-Seiki MF-D6 CNC Control FMB Turbo 5-42 Bar Feed Collet Chuck on Main& Sub Spindle 12-Position Upper Turret 6-Position Lower Turret Parts Catcher- Chip Conveyor CATALOG SPECIFICATIONS: Bar Capacity. Round. 1.6" Spindle Bore. 2.05" Swing Over Bed. Maximum. 18.9" Swing Over Cross Slide. 14.6" Turning Diameter. Maximum. 9.06" Turning Length. Maximum. 3.94" Distance Between Spindle Noses. 23.4" Rapid Traverse Rate. X-Axis. 472 IPM. Rapid Traverse Rate. Z-Axis. 590 IPM. Spindle Speeds. Main Spindle. 50-5000 RPM. Spindle Speeds. Sub Spindle. 60-5000 RPM. Main Spindle Drive Motor. Horsepower. 10/7.5 HP. Subspindle Drive Motor. Horsepower. 7.5/5 HP. Floor Space Required. W x D. 198" x 109" ... moreOverall Height. 79" Weight Approximately. 12.276 LBS. PRICE: F.O.B. OUR WAREHOUSE. $59.500.00. Machinery/Equipment Subject to Prior Sale.
PUMA CNC LATHE HAAS MAZAK MORI SEIKI MAKINO OKUMA HARDINGE TOOL PRE-SETTER
PUMA CNC LATHE TOOL PRESETTING PROBE GUARANTEED NOT DOA REMOVED FROM A PUMA CNC LATHE ORIENTAL MOTOR 4TK10GN-A TORQUE MOTOR Powered by The free listing tool. List your items fast and easy and manage your active items.
MORI SEIKI MV 45/40 SPINDLE RETRACTOR BAR COMPLETE
THIS UNIT IS IN GREAT CONDITION. IT CAN BE INSPECTED IN OUR WAREHOUSE. Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $200 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by thru ebay. FREE SHIPPING TO ALL 48 STATES AND CANADA. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY thru ebay. If payment is not received within ... more7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret punch, welder, tube bender and e.t.c. Whether you are in the market to sell your surplus equipment or purchase that hard to find machine, we have a knowledgeable staff that will strive to deliver quality products and services based on your needs, and assist you from start to finish. We don't j
Mori Seiki MV40M 5 Axis Vertical Machining Center - New in 1995
Item Details Item Information Item Name: Mori Seiki MV40M 5 Axis Vertical Machining Center Item# 10315 Price/Each: $41.500.00 Year: 1995 Brand Name: Mori Seiki Model: MV40m Serial# Asset Tag: Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description Mori Seiki Model MV40M 5 Axis Vertical Machining Center Table Size: 35.4" x 17.7" X-Axis Table Travel: 22.0" Y-Axis Saddle Travel: 16.1" Z-Axis Spindle Head Travel: 18.1" Maximum Distance Spindle To Table: 5.9" 24" Rapid Traverse Rate: 787 IPM X.Y,Z Spindle Taper: CAT-40 Spindle Speeds: ... more8.000 RPM Spindle Drive Motor: 15 HP Automatic Tool Changer: 30 Positions Maximum Tool Diameter: 3.1"4.9" Maximum Tool Length: 11.8" Maximum Tool Weight: 15.Lbs. Chip To Chip Time: 5.2 SEC Tool Change time: 1.5 SEC Equipped With Yasnac I80M CNC Control Tsudakoma Model TRNC-201 5th Axis Trunion Type Rotary Table 30 Position Side Mount Tool Changer(2) Identical Machines Available Approximate Dimensions: 88"LR) X 88"FB) X 106"H) Approximate Weight: 8.580 Lbs. Year Mfg. 1995- Contact Us About This Machine Should you have questions. Please contact David Drozdenko at 860-484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote.
MORI SEIKI 1 3/4" BORING BAR HOLDER
MORI SEIKI 1 3/4" BORING BAR HOLDER EQUIPPED WITH: 1 3/4" MORI SL2- AVAILABLE: 10- WGT: PRICE: FOB BROOK PARK. OH- $ 145.00/EACH SUBJECT TO PRIOR SALE BT 6668 FOR ADDITIONAL INFORMATION OR QUESTIONS PLEASE CONTACT DE MAXWELL OR JOHN AT: 216-761-7011 McKean Machinery Sales 5372 W. 130th Brook Park. OH 44142 sales@mckeanmachinery.com
MORI SEIKI 1 1/2" BORING BAR HOLDER
MORI SEIKI 1 1/2" BORING BAR HOLDER EQUIPPED WITH: 1 1/2" MORI SL2- AVAILABLE: 3- WGT: PRICE: FOB BROOK PARK. OH- $ 145.00/EACH SUBJECT TO PRIOR SALE BT 6669 FOR ADDITIONAL INFORMATION OR QUESTIONS PLEASE CONTACT DE MAXWELL OR JOHN AT: 216-761-7011 McKean Machinery Sales 5372 W. 130th Brook Park. OH 44142 sales@mckeanmachinery.com
20.05" Swg 25.4" cc Mori Seiki ZL-25B/500 CNC LATHE, Fanuc 16TT, 10"chk., 4-axis
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 20.05" Swg 25.4" cc Mori Seiki ZL-25B/500 CNC LATHE. Fanuc 16TT, 10"chk. 4-axis Ref# 147703 iammdna XCNCTC MORI SEIKI 4-AXIS CNC LATHE MODEL: ZL-25B/500 NEW:1993 SPECIFICATIONS: SWING OVER ... moreBED. 20.5" SWING OVER CROSS SLIDE. 13.8" BETWEEN CENTERS. 25.4" MAX MACHINING DIAMETER. 10.2" X-AXIS TRAVEL UPPER/LOWER. 6.3"5.7" Z-AXIS TRAVEL UPPER/LOWER. 23.2"23.2" SPINDLE SPEED. 35-3.500 RPM HOLE THRU SPINDLE. 3.1" SPINDLE NOSE. A2-6 TOOL CAPACITY UPPER. 10 TOOLS TOOL CAPACITY LOWER. 8 TOOLS QUILL STROKE. 3.1" TAILSTOCK QUILL TAPER. MT3 TAILSTOCK BODY TRAVEL. 23.2" MAIN MOTOR. 20/25 HP MACHINE NET WEIGHT. 15.070 EQUIPPED WITH: FANUC 16TT CNC CONTROL 10" 3-JAW HYDRAULIC CHUCK 10 POSITION UPPER& 8 POSITION LOWER TURRETS PROGRAMMABLE TAILSTOCK CHIP CONVEYOR ALL AVAILABLE MANUALS ALL AVAILABLE TOOLHOLDERS INSPECT UNDER POWER Machine Location: HARRISON. NJ Click Here For More Mori Seiki Machines Click Here For More CNC Machines- CNC TURNING CENTERS- CNC LATHES(s) Questions about this Machine? Call Mike at(800) 873-6224 ext 7540 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at
YAMATAKE-HONEYWELL MICRO SWITCH MORI SEIKI MV-45/40 SL1- SL1 SL1 Y132 5A ^^
Check out my! YAMATAKE-HONEYWELL MICRO SWITCH TYPE: SL1- Y132 5A(OUR INVENTORY# 423-J2) THIS IS IN GREAT WORKING CONDITION. ALL ITEMS HAVE BEEN CAREFULLY REMOVED. MORI SEIKI MV-45/40 Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in great working condition, tested USED. But in good working condition. USED. SOLD AS IS DETAILS: 30 DAY MONEY BACK Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day ... morein order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, b
TOKYO PRESSURE GAUGE 0-100 PSI MORI SEIKI MV-45/40 LIQUID FILLED GAUGE
Check out my! TOKYO PRESSURE GAUGE TYPE: 0-100 PSI(OUR INVENTORY# 417-J2) THIS IS IN GREAT WORKING CONDITION. ALL ITEMS HAVE BEEN CAREFULLY REMOVED. MORI SEIKI MV-45/40 Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in great working condition, tested USED. But in good working condition. USED. SOLD AS IS DETAILS: 30 DAY MONEY BACK Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for ... moreus to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hy
MORI SEIKI MV 35/40 OIL LEVEL GAUGE SMC /
Check out my! OIL LEVEL GAUGE TYPE: SMC REMOVED FROM MORI SEIKI MV 35/40 Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in great working condition, tested USED. But in good working condition. USED. SOLD AS IS DETAILS: 7 DAY MONEY BACK( VISIT OUR EBAY STORE) Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact ... moreus by phone 818 899-9000, cell 818 383-6169 or by thru ebay. WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY thru ebay. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret punch, welder, tube bender and e.t.c.
YASNAC CIRCUIT BOARD JANCD-CG01C JANCDCG01C JANCD CG01C DF8201882 MORI SEIKI ^^
Check out my! YASNAC CIRCUIT BOARD TYPE: JANCD-CG01C(OUR INVENTORY# 98) Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FREE SHIPPING TO ALL 48 STATES ... moreAND CANADA. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret punch, welder, tube bender and e.t.c. Whether you are in the market to sell your surplus equipment or purchase that hard to find machine, we have a knowledgeable staff that will stri
AMFLO REGULATOR FILTER LUBRICATOR 2110A 2010A 2210A MORI SEIKI
Check out my! AMFLO REGULATOR FILTER LUBRICATOR TYPE: 2110A 2010A 2210A(OUR INVENTORY# 102) Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FREE SHIPPING ... moreTO ALL 48 STATES AND CANADA. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret punch, welder, tube bender and e.t.c. Whether you are in the market to sell your surplus equipment or purchase that hard to find machine, we have a knowledgeable
YASKAWA JANCD-I/O 01B JANCDI/O 01B JANCD I/O JANCD-I /O MORI SEIKI CNC
Check out my! YASKAWA CIRCUIT BOARD TYPE: JANCD-I/O O1B(OUR INVENTORY# 79) Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FREE SHIPPING TO ALL 48 STATES ... moreAND CANADA. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret punch, welder, tube bender and e.t.c. Whether you are in the market to sell your surplus equipment or purchase that hard to find machine, we have a knowledgeable staff that will s
YASKAWA DCP UNIT JUSP-DCP 30A JUSPDCP30A JUSP DCP 30A MORI SEIKI CNC ^^
Check out my! YASKAWA DCP UNIT TYPE: JUSP-DCP 30A(OUR INVENTORY# 81) Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FREE SHIPPING TO ALL 48 STATES ... moreAND CANADA. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret punch, welder, tube bender and e.t.c. Whether you are in the market to sell your surplus equipment or purchase that hard to find machine, we have a knowledgeable staff that will strive
MORI SEIKI SL3 SL4 DIA: 1.500" TOOLHOLDER TOOL HOLDER
Check out my! MORI SEIKI SL3 SL4 TOOL HOLDER DIAMETER: 1.500" Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $200 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FOR INTERNATIONAL SHIPPING COSTS PLEASE ... moreCONTACT US BY E-MAIL. COMBINED SHIPPING IS AVAILABLE. THE COST DEPENDS UPON THE SIZE AND THE WEIGHT OF THE PACKAGE. FOR THE TOTAL AMOUNT OF COMBINED SHIPPING COST. PLEASE CONTACT US AFTER YOUR PURCHASE. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret punch, welder, tube bender and e.t.c. Whether you are in
Mori Seiki NT-1000W CNC Mill Turning Center
We are pleased to offer the following for your consideration: One used Mori Seiki CNC Mill Turning Center Model: NT-1000W New: 2009/Install-2011 Specifications: Max. Turning Center. 14.6" Max. Turning Length. 15.8" Tool Spindle travel X/Y/Z. 15"8.25"18.9" Bar Capacity. 2" Max. Spindle Speed. 6.000 RPM Max. Tool Spindle Speed. 12.000 RPM Tool Storage Capacity. 38 tools Tool Shank. Capto-C5 Rapid Traverse. 1.575/1575/1970 IPM Spindle Drive Motor. 15 HP Tool Spindle Drive Motor. 12 HP Floor Space. 115" x 114" x 99" Equipped With: MSX-711 IV CNC/Mapps/SPRI Software* 6" Kitagawa Hollow Chuck* 4" Kitagawa Chuck* High Pressure Coolant* Chip Conveyor* Renishaw MP700 Probe* Barfeed I/F* Polygon turning* 1 GB Program Storage* Approx. 50 Tool Holders* C Axis Indexing Increment 0.0001 Deg* Inspect ... moreUnder Power Price: $179.500.00 Click picture for more views Pride Machinery Sales. Inc Tel-631-586-5252 Email:
Fanuc servo motor A06B-0613-B031 pulse coder A860-0300-T001 CNC Mori seiki
For sale is a Fanuc servo motor model A06B-0613-B031. With a pulse coder# A860-0300-T001, I have no way of testing it on a machine, I did measure the windings with an ohm meter, it does not measure shorted to ground, but is an open circuit between two of the three phases, not sure about the pulse coder, I have no way of testing it, so it is sold as is for parts or a rebuild core, buyer is responsible for shipping, we accept paypal, checks or money order, item will not be shipped until checks have cleared bank. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-13eabf0c1cf-0xff-
FANUC 6M MORI SEIKI CNC MILL PENDANT A02B-0060-C425 /
Check out my! MORI SEIKI MV45 FANUC SYSTEM 6M CONTROL PENDANT TYPE: A02B-0060-C425 OUR INVENTORY# 17 THIS IS IN GREAT WORKING CONDITION. Condition: NEW. In box NEW. No box NEW. Old inventory X USED. But in great working condition, tested USED. But in good working condition. USED. SOLD AS IS DETAILS: 7 DAY MONEY BACK Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. ... moreBefore sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, i
Tree 1016 CNC Vertical Machining Center 40 x 20 Travel VMC Mori Seiki Mazak ATC
Tree Model 1060 CNC Vertical Machining Center. S/N 9-12-93. This is an early 90's Tree 1060 Vertical Machining Center that we purchased from a small Tool Shop that has closed. It has a 50 x 23 table with 40 x 20 x 25" Travels. Dual Range 20 HP CT 40 spindle has max 8000 RPM. The tool changer capacity is 20 tools. It is wired for 230 volts. 3 phase electrics. Machine comes with Acramatic PC-2100 CNC Control. Remote Pendant, 3-1/2 floppy drive, and RS 232 Port. It includes a flood coolant system, Auto Lube and Full Enclosure. We have fired the machine up and everything seems to work as it should except the monitor. We simply hooked up an extra monitor we had and continued. To watch Video of machine please view We believe shipping rate to be around 17.000 lbs THIS MACHINE IS FOR SALE LOCALLY AND WE MUST RESERVE THE RIGHT TO WITHDRAW ... moreTHE LISTING IF AN ACCEPTABLE OFFER IS RECEIVED. Loading is free of charge. Buyer is responsible for all shipping costs. Ohio sales tax rules in effect. Payment must be received within 5 days of close of sale. Machine sold as is.
YASKAWA MOTHERBOARD JANCD-CP02 JANCDCP02 JANCD CP02 MORI SEIKI DE8401366 ^^
Check out my! YASKAWA MOTHERBOARD TYPE: JANCD-CP02 DE8401366(OUR INVENTORY# 90) Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FREE SHIPPING TO ALL ... more48 STATES AND CANADA. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret punch, welder, tube bender and e.t.c. Whether you are in the market to sell your surplus equipment or purchase that hard to find machine, we have a knowledgeable staff that w
NEMIC LAMBADA POWER SUPPLY VST-5-522 VST5522 VST 5 522 MORI SEIKI CNC ^^
Check out my! NEMIC LAMBADA POWER SUPPLY MORI SEIKI TYPE: VST-5-522(OUR INVENTORY# 95) Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FREE SHIPPING ... moreTO ALL 48 STATES AND CANADA. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret punch, welder, tube bender and e.t.c. Whether you are in the market to sell your surplus equipment or purchase that hard to find machine, we have a knowledgeable staff
Mori Seiki Operation Manual for Fanuc 6 M Controls Printed 1984
Mori Seiki MH-63/80 Horizontal mill operation book can be used for programming and operation on any Mori Seiki milling machine with Fanuc 6M controls. Published in 1984 and in very good condition. Includes operation and programming. This book is for a horizontal machine but the information contained can be used for vertical machines. Contact for further information.
MORI SEIKI SL2 CNC Lathe rebuild and retrofitted
This Mori Seiki can be tested and inspected after $500 pay pal deposit for 7 days after end of auction. We are only 15 minutes from George Bush Houston Airport. Rebu ilt an d re t ro fitt e d CN C Chucke r La t h e Re: Mor i Seik i SL-2B rebuilt and retrofitted r eno w n m ach i n e t oo l r ebu il de r an d r e tr o fitt e r no w o ff e r s t he popu l a r h i g h qua lit y, h i g h pe rf o r m anc e M or i S e i k i S L- 2 B ve r sa til e CN C l a t he, co m p l e t e l y r ebu il t an d r e tr o fitt e d w it h a s t a t e- o f-t he- a r t NC T- 20 1 T ouc h CN C con tr o l sys t e m w it h A C d ri ve s/ m o t o r s. G enera l Th e M or i S e i k i S L- 2 B CN C La t he, w h il e co m pac t i n s i ze, o ff e r s gene r ou s m ach i n i n g capac iti es. Th e m ach i n i n g capac it y an d t h e do ll a r i nves t m en t m ak e t h i ... mores m ach i n e t h e ve r sa til e t oo l neede d i n t oday' s j o b sho p env ir on m en t. W h il e pe rf ec t f o r t h e j o b shop, t h e qu i cknes s an d t h e po w e r o f t h i s l a t h e i s a l s o i dea l f o r ded i ca t e d p r o d uc ti o n i n m anu f ac t u ri n g env ir on m en t. Th e 45 ° s l an t be d des i g n an d t h e l a r g e doo r open i n g a ll o w s t h e chuck, t u rr e t, an d t oo l s t o b e w it h i n eas y r eac h an d s i gh t o f t h e ope r a t o r assu ri n g h i g h p r oduc ti v it y. B e d Th e M or i S e i k i M ode l S L- 2 B i s des i gne d w it h t h e ope r a t o r s' hea lt h an d w e l l be i n g i n m i nd. E r gono m i c s p l ay s a m a j o r r o l e i n t oday' s m anu f ac t u ri n g env ir on m en t an d t h i s l a t h e ha s bee n des i gne d i nco r po r a ti n g a 45 ° s l an t be d a ll o w i n g eas i e r acces s t o t h e w o r kspac e a r ea. T h e 45° s l an t be d an d f u l l s i z e doo r a ll o w s t h e ope r a t o r t o l oad/ un l oa d w o r kp i ece s an d chang e t oo li n g i n a n ex tr e m e l y eas y m anne r T h e be d i s cons tr uc t e d fr o m a s i ng l e p i ec e M ee
12 Toolholder & Boring Bar Holders Mori Seiki TL 3/5 CNC Lathe
We are selling 12 different pcs of Mori Seiki(11) Boring Bars and(1) Stick Toolholder shown in the attached pictures for $250.00 ea. with your choice of size. Type, and quantity. The boring bar holders size and quantity are as follows: 1) 1 3/4" Dia, 4) 2" Dia. 3) 1 1/2" Dia. 3) 1 1/4" Dia. and(1) O.D. or Face Stick Toolholder. They are used and have dents and scratches and may be missing a set screw. Otherwise they are in good working condition. Free Shipping within the lower 48 states. e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13eb79e4274-0xf6-
MORI SEIKI MV-45/40 CNC VERTICAL MILL 17"x30" Travel, 6000rpm, Fanuc Control
ebay template MV-45/40 CNC Vertical Mill I TEM S OLD A S P ICTURED This 1984 MV-45/40 medium duty vertical machining center offers great rigidity and machining precision. This machine is in good running condition with quite spindle noise and travel on all ways. Includes covers. Not pictured on machine and removed to conserve space. See below for pictures of machine and covers stored separately. INCLUDES Chip Conveyor Splash Guard Covers Cooling Unit FEATURES Fanuc 6M Control High speed ATC; tool-to-tool time is only 2.5/3.0 sec. CAT-40 Spindle Taper SPECIFICATIONS Table Size 43.3" x 17.7" 1100 x 450 mm T-Slots. 4(width x distance) 0.709" x 3.937" 18 x 100mm X-Axis Travel 30" 762mm Y-Axis Travel 17.7" 450mm Z-Axis Travel 19.7" 500mm Spindle Motor AC 5.5 3.7kW Spindle Speed 60 to 6.000 rpm Spindle Taper 40 ... moreNumber of Tools 20 X/Y/Z Axis Cutting Feed Rate 0.04" to 140"min 1 to 3600 mm/min X/Y/Z Axis Rapid Feed Rate 394"min 10000 mm/min Machine Weight 15400 Lbs. 7000 kg*Specifications subject to verification It's All Here! INSPECTION NOTES: As with any piece of equipment. New or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item's cosmetic condition. This item is sold as pictured. Shipping Shipping is the responsibility of the buyer; however. Machinery Exchange has a large network of freight carriers to help you find the best price. If you would like a freight quote for this item please click"Contact Seller" or“Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Or contact us via telephone at(818) 718-6734 Machines are attached to a skid for and covered in protective cosmoline coating for shipment. A forklift may be required to remove the machine from
Mori Seiki Sl-4 Lathe with Yasnac Control power supply
This is the power supply off of an Mori Seiki SL-4 lathe with a Yasnac Control. It was fully operational when we tool it off to replace it with a centroid control. If you have any questions let me know Thanks.
MORI SEIKI MODEL ZL-25A/500 4-AXIS CNC TURNING CENTER, cnc lathe, will ship worl
MORI SEIKI MODEL ZL-25A/500 4-AXIS CNC TURNING CENTER General Specifications Swing over bed 20.5" Swing over cross slide 13.8" Between centers 25.4" Max. machining diameter 10.2" Max. machining length 21.7" X-Axis Up:6.3"1.2"+5.1" Z-Axis Up:23.2"Down:23.2" Spindle speed 42-4200 RPM Spindle nose JIS A-6 Hole thru spindle 2.4" Spindle I.D. 4.3" Shank height for square tool 1.0" Shank diameter for boring bar Max. 2.0" Rapid feed rate(Z-Axis) 590.6" Tailstock stroke 23.2" Tailstock quill taper MT3 Tailstock quill stroke 3.1" Electric power supply 40 Kva Machine Weight(approx) 15.400 Lbs NOTE: CUTTING HOURS 6,064 Motor Specifications Not Available Equipped With Mori/Fanuc MSD-516(Fanuc 16T) CNC controls Programable tailstock(2) Turrets Misc. turret toolholders ... moreCollect chuck Chip Conveyor Splash guards Serial Number 654 Year 1995 Location PROSPECT HEIGHTS. IL Video:
MITSUBISHI NO FUSE BREAKER NF100-CS NF100CS NF100 CS 75AMP 3P MORI SEIKI
Check out my! MITSUBISHI NO FUSE BREAKER TYPE: NF100-CS 75AMP 3P(OUR INVENTORY# 80) Payment must be made with Money Order. Cashier Check, Business Check, or Personal Check. We gladly accept pay-pal payments under $2,000 only. Accommodations can be made for larger pay-pal transfers with prior permission only. All payments must be received by Leopard Machine Sales within 7 days. Payments must be sent to LEOPARD MACHINE SALES at 12179 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 899-9000, cell 818 383-6169 or by e-mail WILL CALLS( LOCAL PICK UPS) ARE WELCOME BETWEEN 8:00 AM TO 4:00 PM BY APPOINTMENT ONLY. WE CAN SHIP BY UPS GROUND. FREE SHIPPING TO ... moreALL 48 STATES AND CANADA. FOR INTERNATIONAL SHIPPING COSTS PLEASE CONTACT US BY E-MAIL. If payment is not received within 7 days. LEOPARD MACHINE SALES has the right to re-list the item back on e-bay. After purchasing the item, please contact us immediately for details on how to complete the transaction. After the item has been won, the buyer has 14 days to arrange for a pick up. After 14 days the buyer will be charged storage fees(varies upon the size of the equipment) Item is sold as is where is. LEOPARD MACHINE SALES. is a stocking CNC& Manual used machine tool dealer with inventory on site at our 12179 Branford Street. Unit A, Sun Valley, California 91352 facility. Our staff has a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We can locate the following equipment for your needs: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, edm, drill chuck, ironworker, turret punch, welder, tube bender and e.t.c. Whether you are in the market to sell your surplus equipment or purchase that hard to find machine, we have a knowledgeable staff th
Mori Seiki TL-2 Cooling Pump
Mori Seiki TL-2 Cooling Pump This item is available for local pick up only. If shipping is desired. It will be at buyers expense. Payment is required within 48 hours of making purchase. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ed4d1adec-0x106-