In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
49.99
Buy It Now
$9.99 Shipping
Condition: Used
Location: Lombard, United States
Up for auction is a vintage micrometer carriage stop. The brand name is not known. But it works great and has smooth action! The photos show any damage. ... moreThere is a crack, but it's doesn't affect the function. What you see is what you get. Please be sure to email any questions before purchasing. Thank you!
$
239.99
Buy It Now
$18.40 Shipping
Condition: New
Location: Berrien Springs, United States
New ER32 collet chuck with 14 piece collet set, collet wrench and 1-1/2" -8 spindle mount backing plate. Collet sizes - 1 /16", 1/8"; 3/16"; 7/32", 1/4"; ... more5/16"; 11/32", 3/8"; 7/16"; 1/2"; 9/16"; 5/8"; 11/16"; 3/4".
$
2800.00
Buy It Now
Condition: Used
Location: De Soto, United States
This unit is 115/230 volt single phase and currently wired 115. The caster dollies under the table are not included. Also included are the following;. ... more6" 4 Jaw Chuck. 6" 3 Jaw Chuck. 9" Faceplate.
$
180.50
22h 15m 50s
25 bids
$15.00 Shipping
Condition: Used
Location: Pipersville, United States
A carriage stop, a face plate with 1 1/2 8 TPI. four lathe dog holders a knurling tool. cut off tool.
$
149.99
Buy It Now
$51.29 Shipping
Condition: Used
Location: Lebec, United States
I will gladly ship multiple items together as long as it is safe to do so.
$
1620.00
Buy It Now
$380.00 Shipping
Condition: Used
Location: Woodbridge, United States
Untitled Document Free. Fast Shipping Every Business Day! Logan 11-inch Logan Lathe Parts List Click for Our Complete Catalog Manual Description: Number ... moreof Pages: 16. This is a reproduction. Not a photocopy, of an original Logan 11-inch Lathe Parts List. This manual contains complete parts list and exploded views of the lathe. This is a very good manual that covers everything stated below in the contents. Contents: Headstock Assembly.1. Shifter Rack Assembly.2. Gear Guard Assembly.3. Reverse Gear Assembly.4. Change Gear Assembly.5. Compound Rest Assembly.6. Saddle Assembly.7. Worm& Clutch Assembly.8. Automatic Apron Assembly.9. Gear Box Assembly.10. Dial Indicator Assembly.11. Tailstock Assembly.12. Bed Assembly.13. Drive Box Assembly.14. Bench Stand& Guard Assembly.15. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper t
$
1950.00
Buy It Now
Condition: Used
Location: Orange, United States
$
209.99
Buy It Now
$18.40 Shipping
Condition: New
Location: Berrien Springs, United States
Boring, Turning and Facing Tool Holder, fits tool bit up to 1/2" and round shank tool bit up to 7/16" (#250-102). Turning and Facing Tool Holder, fits ... moretool bit up to 1/2" (#250-101).
$
599.00
Buy It Now
$152.80 Shipping
Condition: Used
Location: Holland, United States
$
265.00
Buy It Now
$8.85 Shipping
Condition: Used
Location: New Hyde Park, United States
Very Nice- Original headstock spindle assembly from a Logan 9" Model 400 lathe. 1 1/2" x 8 TPI spindle threads are in fine order. Original mounting ... morebolts. Bearings, key, spacer and take up nut are also included. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
29.50
Buy It Now
$10.60 Shipping
Condition: New – Open box
Location: Sardinia, United States
COBORE ID 1.530”. COBORE DEPTH. 360”.
$
499.00
Buy It Now
Free Shipping
Condition: Used
Location: North Port, United States
Used. Looks like some repairs been done in the past. Please check pictures for condition. Spins freely, but cleaning and oiling will be nessary. Free ... moreshipping to lower 48 states only.
$
29.00
Buy It Now
Free Shipping
Condition: New
Location: Dayton, United States
(Photo 3: Example of Model D lathe the part fits. lathe the part fits. The lead screw exits from the described gearbox. The Idler Bevel Gear runs between ... morethe two lead screw bevel gears and is mounted to the inside of the reverse gear case.).
$
80.00
Buy It Now
$13.60 Shipping
Condition: New
Location: Glen Cove, United States
NEW ATLAS CRAFTSMAN LOGAN SOUTH BEND LATHE USA MADE 3C COLLET ADAPTER 3MT TAPER Click to Enlarge Click to Enlarge Click to Enlarge NEW FROM MYMACHINESHOP.NET ... moreUSA MADE 3C COLLET ADAPTER WITH 3 MORSE TAPER. FITS ATLAS CRAFTSMAN 9-12 INCH LATHES. MANY LOGAN AND SOUTH BEND MODELS TOO WITH 3MT ID TAPERED SPINDLES. SOLID STEEL CONSTRUCTION WITH LOCATOR KEY. BLACKENED NON-HARDENED FINISH. THANKS, AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-140629aec11-0xf4-
$
154.24
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Features: BXA Size 250-222 Wedge Type Tool Post Tool Holders Set for Swing Dia 10 - 15" Suitable for lathe center height 0.7-2.2" (top compound surface ... moreto lathe center line) Interchangeable with Aloris, Dorian , Yuasa & Phase II Brand new Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , Logan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes..
$
389.95
Buy It Now
$77.50 Shipping
Condition: Used
Location: Uxbridge, United States
A little dirty but otherwise in excellent condition. The lead screw gear is included.
$
599.00
Buy It Now
$120.25 Shipping
Condition: Used
Location: Holland, United States
$
39.99
Buy It Now
Free Shipping
Condition: New
Location: Dayton, United States
One NEW MANUFACTURED ABS BEVEL GEAR 9-49A (Slider) for reverse lead screw gearbox. Atlas and Craftsman 9-10 and 12" lathes. SEE PHOTO KEY! LATHE NOT INCLUDED. ... morePhoto 3:Example of Model D lathe the part fits.
$
75.00
Buy It Now
$14.50 Shipping
Condition: Used
Location: Hoffman Estates, United States
Logan 200 and 10&11 inch lathe pinion gear. Good 16 tooth 16 dp gear and hand wheel threads.
$
299.00
Buy It Now
$22.50 Shipping
Condition: Used
Location: Jersey City, United States
This Logan Lathe 290 is a versatile machine that will meet your metalworking needs. Crafted in the United States, it features a steady rest which will ... moreprovide support and stability while you work. With its durable construction and reliable performance, this metal lathe is a great addition to any shop. Whether you're a business owner or a hobbyist, this machine type is perfect for making precision cuts and creating intricate designs. The model 290 is designed to handle a variety of materials, so you can work with confidence knowing that your lathe can handle whatever you throw at it. Invest in this high-quality metalworking equipment and take your craftsmanship to the next level.
$
149.95
Buy It Now
$79.75 Shipping
Condition: Used
Location: Uxbridge, United States
LOTS OF AUCTIONS ONLINE NOW! Brand Logan Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ... moreebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
$
539.99
1d 17h 52m 58s
0 bids
Condition: Used
Location: Yonkers, United States
Very Nice- Original change gear stud assembly for a Model 400 Logan 9" lathe. All in fine order. As shown. Always combine shipping- If you are planning ... moreto purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
1100.00
Buy It Now
$24.75 Shipping
Condition: Used
Location: Tewksbury, United States
Includes Collets as follows: 3/32, 5/32, 7/32, 9/32, 11/32, 13/32, 15/32, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2. Also includes 2 solid collets. For sale is ... morea rare Logan 10" Lathe Model 200 Lever Collet Closer (looks to have barely been used) Nose Cone and Spindle Nut, all in good usable condition, dirty/tarnished from age/use.
$
1400.00
Buy It Now
Condition: Used
Location: Saint Petersburg, United States
Untitled Document Free. Fast Shipping Every Business Day! Logan 11-inch Logan Lathe Parts List Click for Our Complete Catalog Manual Description: Number ... moreof Pages: 16. This is a reproduction. Not a photocopy, of an original Logan 11-inch Lathe Parts List. This manual contains complete parts list and exploded views of the lathe. This is a very good manual that covers everything stated below in the contents. Contents: Headstock Assembly.1. Shifter Rack Assembly.2. Gear Guard Assembly.3. Reverse Gear Assembly.4. Change Gear Assembly.5. Compound Rest Assembly.6. Saddle Assembly.7. Worm& Clutch Assembly.8. Automatic Apron Assembly.9. Gear Box Assembly.10. Dial Indicator Assembly.11. Tailstock Assembly.12. Bed Assembly.13. Drive Box Assembly.14. Bench Stand& Guard Assembly.15. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper t
$
14.75
Buy It Now
$6.05 Shipping
Condition: New
Location: Merrimack, United States
South Bend, Logan, Atlas, Sheldon AXA QCTP Dial Indicator Mount, Dual Position. Color is typically grey, or silver. Note: Does not include digital indicator ... moreshown for reference only.
$
2200.00
Buy It Now
Condition: Used
Location: North Olmsted, United States
Logan 10" Lathe / Model 200 / Some Tooling Included / Good Condition. Local pickup only. Located in North Olmsted, Ohio
$
3500.00
Buy It Now
Condition: Used
Location: Henderson, United States
This Logan lathe model 2555VH is a versatile machine that is ideal for metalworking tasks. It has a 12"x24" working area and comes complete with a 5C ... morecollet adaptor and 3/4 jaw chuck, making it suitable for a variety of projects. The lathe operates with manual and semi-automatic controls, and it is a turret lathe type.It belongs to the metalworking lathes category and is a great addition to metalworking equipment. This machine is perfect for businesses in the CNC, metalworking, and manufacturing industries. With its reliable brand and impressive features, it is an excellent investment for anyone looking for a powerful and efficient lathe machine.
$
1500.00
Buy It Now
Condition: Used
Location: Beckley, United States
LOGAN LATHE Power-Kraft 9". ATLAS 6" Lathe Machine. Mounted on fiber loy board 471/2" x 20 3/4" x 1/2". Does not have motor. Parts only.
$
50.00
Buy It Now
$5.00 Shipping
Condition: New
Location: Sterling Heights, United States
New Remake of a 12 or 14 inch Logan Lathe threading chart.This threading chart comes without mounting holes so it can either be applied using a double ... moresided tape or you can drill holes and rivet to the gearbox.Made from aluminum with black anodized coating and then laser etched.I can make other threading charts for different lathes so feel free to send a message regarding that.
$
150.00
Buy It Now
$18.40 Shipping
Condition: Used
Location: Bennington, United States
South Bend 9” lathe 4 position tool post,logan,atlas lathe. I got this with a south bend 9” lathe. It will fit a lathe with a 1.125” x .270 + t-slot
$
85.00
Buy It Now
$5.45 Shipping
Condition: Used
Location: South Plainfield, United States
CHUCK BACKPLATE … 1-1/2” - 8 THREAD … 4.920” OVERALL DIAMETER3.752” BOSS DIAMETER3 HOLES DRILLED/COUNTERBORED FOR 5/16 BOLTS3 TAPPED HOLES FOR 5/16 - ... more18 HOLES ARE ON 2.125 BOLT CIRCLE1.25” OVERALL THICKNESS VERY NICE USED CONDITION PLEASE MESSAGE ME WITH ANY QUESTIONSWILL COME AS SHOWN IN PICTURESWILL COMBINE SHIPPING WHEN POSSIBLE
$
22.00
Buy It Now
$5.45 Shipping
Condition: Used
Location: New Hyde Park, United States
This gear has 24 teeth and is used in the LA-1201 gearboxBore = 0.438”OD = 1.300”Width = 0.313”Old part number is LA-1230New part number is LP-1010
$
9.47
Buy It Now
Free Shipping
Condition: New
Location: Ionia, United States
These would be exactly what you would get if you ordered direct from Logan. These wipers cross reference to the original Logan part number LP-1692 and ... moreare. Wipers are sold in sets of 4 and are very reasonably priced parts so don’t miss out on a chance to pick up a set for your lathe.
$
425.00
Buy It Now
$202.58 Shipping
Condition: Used
Location: North Tonawanda, United States
The pan is thin and not prefect. It’s better than most I have seen. ( depends on your device ).
$
150.00
Buy It Now
$18.40 Shipping
Condition: Used
Location: Bennington, United States
5" DOG DRIVER FACE PLATE. SOUTH BEND ATLAS LOGAN LATHE, 1-1/2"8 TPI, FACEPLATE. Please let the pictures help with the description and condition ... moreand view my other auctions for more LATHE TOOLING + PARTS. Check my feedback, satisfaction guaranteed and will combine ship when possible. Insurance is included in the shipping price.
$
121.95
Buy It Now
$6.80 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan used the same parts in many lathes. It’s very possible that even though your model number is not listed in the title it may still work. Visit the ... morewebsite below to check the part numbers against your lathe.http://vintagemachinery.org/mfgindex/detail.aspx?id=2093&tab=3Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter how big or small your contribution is. THANK YOU
$
32.95
Buy It Now
$9.75 Shipping
Condition: New
Location: South El Monte, United States
SOUTH BEND. LOGAN, ATLAS FLAT DRIVE BELT. CUSTOM CUT, LATHES, MILLS, OR ANY OTHER MACHINES, CAN BE USED FOR OTHER APPLICATIONS. This listing is for up ... moreto 3/16" X 1-1/2" Wide up to 70" long. Multi-ply composite(transmission) belt custom cut. FOR A LONGER BELTS PLEASE SEE MY OTHER LISTINGS Description of our CB 16 Transmission Belt Top and Bottom surfaces: Covers of natural and synthetic rubber blends are designed to protect the carcass from abrasion. Impact, Deterioration and other injurious influences. They can be compounded to meet particular service. Conditions such as oil. Heat, abrasion, etc. 4 Ply. Approx. 3/16" thick, pulleys should be larger then 1-1/2" diameter The strength portion of the belt consisting of multiple piles of solid woven. Rubber impregnated fabric, Bonded together with friction and skim coats. The fabrics most commonly used are nylon. Cotton duck, Vinylonnylon. Rayon and polyester. Hope this helps. Please check you belt length before bidding not all models are the same. If you not sure about the length of you belt 1) adjust the tensioning bolt so that you have the min travel. Making so you have a lot of adjusting room as the belt stretches, 2) check it with a string around the pulleys or wrap a soft measuring tape around your pulleys. And take the reading. Your belt is delivered with alligator lacing attached and a connector pin ready to use. Excellent traction. Wear and oil resistance. This belt will outlast your machine. After winning item please leave a message when paying with PayPal on send a message to seller section, width& length, or send a message through eBay. Thank you. PLEASE CHECK OUR FEEDBACK FOR CUSTOMERS SATISFACTION. If you need different size belts please email me with your requirement at samhamen@yahoo.com for a quote. Conveyor belts. Flat power drive belts or industrial belting? You've reached the perfect place. Our business is here to serve you with your custom made belts. Our wide variety of stock allows us to help you with almost any
$
149.99
Buy It Now
$19.95 Shipping
Condition: Used
Location: Troy, United States
##I have no idea what this is--any information would be appreciated ! 23-024 #14. Wear and Tear dust and dirt rust and pitting but in good working condition. ... moreOne of the mounting forks has been brazed-see pictures.
$
28.75
Buy It Now
$5.95 Shipping
Condition: New
Location: Delphi, United States
Logan Lathe 9/10/11 LATHE CHANGE GEAR STORAGE CASEThis storage box will fit original and aftermarket change gears.Easily store your gears in your tool ... morebox or work bench.Unit holds the following:Full Set includes: 2 each 24 32 & 1 each 16,18,36,40,44,46,48,52,54,56,60,64,72Size: ~ 8.5 x 5.50 x2.25
$
57.00
Buy It Now
$6.00 Shipping
Condition: New
Location: Berrien Springs, United States
[1] Cross Slide Nut Part Number AS65NK1. You are sending money to them!
$
16.00
Buy It Now
$6.05 Shipping
Condition: Used
Location: Maspeth, United States
Logan Lathe 10” 11” 1/2 Nut / Half Nut Lever LA - 164 Half Nut Engagement Handle. Condition is Used. Shipped with USPS Ground Advantage.
$
70.00
Buy It Now
$32.55 Shipping
Condition: Used
Location: New Hyde Park, United States
Logan 10" Lathe Quick Change Gear Box Casting With Data Plate. Condition is Used. Shipped with USPS Parcel Select / Ground Advantage.
$
62.00
Buy It Now
$6.00 Shipping
Condition: New
Location: Berrien Springs, United States
[1] Cross Slide Nut Part Number 10F-19 / 537-041. You are sending money to them!
$
400.00
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
EVERYTHING IS IN GOOD CONDITION PLEASE LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF THE ITEM QUESTIONS OR CONCERNS FEEL FREE TO ASK AND I WOULD DO MY ... moreBEST TO ANSWER ANY QUESTIONS FREE SHIPPING TO THE LOWER 48 USPS FLAT RATE SHIPPING
$
365.00
Buy It Now
$100.70 Shipping
Condition: Used
Location: Westland, United States
REMOVED FROM WORKING LATHE WE ARE PARTING OUT. LATHE HAS BEEN SITTING FOR A COUPLE YEARS AND WE NEED CLEANED. PULLEY HAS MINOR SURFACE RUST THAT WILL ... moreCOME OFF EASY WITH STEEL WOOL. ANY QUESTIONS OR NEED MORE PICTURES PLEASE ASK. SEE PICTURES FOR CONDITION. This Logan 10" Lathe Model 850 Headstock is a great find for metalworking enthusiasts. The machine has a manual control system and is made of cast iron. Its turret lathe type makes it perfect for precision work. The lathe also has a swing over bed of 10 inches. It is a must-have for those in the metalworking industry.
$
125.00
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
Could use good cleaning PLEASE LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF THE ITEM QUESTIONS OR CONCERNS FEEL FREE TO ASK AND I WOULD DO MY BEST TO ... moreANSWER ANY QUESTIONS FREE SHIPPING TO THE LOWER 48 FLAT RATE SHIPPING
$
85.00
Buy It Now
$10.40 Shipping
Condition: New
Location: Berrien Springs, United States
Atlas 10- 12" Lathe Split Nuts. Guide, Spring, Ball with mounting hardware 10F-12X 3/4" Lead Screw- Craftsman 101.07403 This listing is for ... morea set of Atlas 10- 12" Lathe Split Nuts. Guide, Spring, Ball with mounting hardware 10F-12X as shown in the photos. In good condition. These work with a 3/4" Lead Screw. This was ordered new from Clausing in 2001 and it looks like the lathe was hardly used after being refurbished. The scroll and lever are listed separately. These parts came off of a 101.07403 Craftsman lathe that was the cleanest lathe I have ever bought. I got the history with it and it showed lots of purchases of parts to make this lathe issue-free. Check my other listings under! I am happy to combine shipping to save you money-just put your items in to the eBay"cart" and then buy them all at once and let me invoice you with correct shipping before you pay. If that is too complicated. Just buy and I will refund shipping but that costs me more in eBay fees. $3.95 Flat Rate SHIPPING anywhere in the lower 48 States. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!
$
300.00
Buy It Now
$69.83 Shipping
Condition: Used
Location: Elkin, United States
Logan Metal Lathe 10” Model 820 saddle, cross slide and compound. Appears to be in good working condition. Thanks for looking!!!
$
45.00
Buy It Now
$23.85 Shipping
Condition: Used
Location: New Hyde Park, United States
Logan 10" 11" Lathe Quick Change Gear Box Casting LA-1201. Condition is Used. Shipped with USPS Ground Advantage.
$
12.50
Buy It Now
Free Shipping
Condition: New
Location: Ionia, United States
3D printed 1 1/2 x 8 tpi spindle nose guard, Protects your spindle thread when working on lathe. These 3D printed spindle protectors are amazingly strong ... moreand fit all 1 1/2 x 8 spindles.
$
275.00
Buy It Now
$163.70 Shipping
Condition: Used
Location: New Hyde Park, United States
Logan 10” Lathe Legs Stand Antique Table Cast Iron VTG. Condition is Used. Shipped with USPS Ground Advantage.
$
145.00
Buy It Now
$136.05 Shipping
Condition: Used
Location: Franklin, United States
All else is as it should be.
$
18.95
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
19.00
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Winnetka, United States
Year February 1950. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. This Manual Covers Models This Manual Includes ... moreThis Manual Has 16 Printed Pages. I’ve read Parts of these Programming and Operations Manuals.
$
135.00
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Spring Hill, United States
This is a rebuild service for 10” and 11” Logan lathes with 3/4-8 Leadscrews.
$
42.00
1d 15h 12m 41s
6 bids
$16.33 Shipping
Condition: For parts or not working
Location: San Jose, United States
New Tools4cheap 3C collet closer set for South Bend 9" model A B or C lathes. Also can be used on the light 10 called the 10K but NOT the heavy 10. ... moreIncludes: Drawbar + Drawbar extension. The bar has an extension that a local machinist made for me that is threaded into the short drawbar with loctite to make it the proper length for the South Bends.You can sort of see the line where the extension starts around the 11" mark on the ruler. Thread Protector 1-1/2"8*Spanner*Morse taper 3 to 3C collet adapter. Hardened/Ground This is a nice set with no plastic parts. It has a thru hole all the way thru the handle which is the max size for a 3c collet. Ship weight 3-4 pounds. A1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13eaa69158d-0xfc-
$
1250.00
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Lenapah, United States
The whole machine is pictured at the end just for reference.
$
7.25
Buy It Now
$5.45 Shipping
Condition: New
Location: Merrimack, United States
Atlas Lathe 1-1/2 x 8 Spindle Thread Protector. This has a nice ribbed edge for gripping when your hands are oily. Atlas Thread Protector. These 3D printed ... morespindle protectors are amazingly strong and fit all 1 1/2 x 8 spindles.
$
80.00
Buy It Now
$10.60 Shipping
Condition: Used
Location: Bayport, United States
Nice Heavy Duty Turret Style Tool Post. Came from an Atlas/Craftsman 10" Lathe but should fit South Bend. Logan and other 10-12" lathes with ... morea new T-Nut. Has a good smooth positive locking action with a helical screw and handle. Tool Holder slots are 1" wide. No manufacturers marks that I could find. Please see my other listings for more machinist's tools. Parts and accessories. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
$
19.90
Buy It Now
$5.95 Shipping
Condition: New
Location: Delphi, United States
The chuck is removed by placing a wrench on a jaw and turning it off, or your preferred way. With minimal pressure, the lock will slip in place. The spindle ... moreis then rotated allowing the block to wedge in place.
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
Logan 10" Lathe 210 Thread Dial Indicator - 200 threading counter
Logan 10" Lathe 210 Thread Dial Indicator This listing is for a Logan 10" Lathe Thread Dial Indicator; very nice. As seen in the photos. The lathe I took this off of was a model 210. I am starting to list the parts from this lathe so check my other listings under"Lathe Parts" I am happy to combine shipping to save you money-just let me invoice you before you pay. $3.95 SHIPPING anywhere in the USA. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!
Lathe Carriage Handwheel Logan Southbend Clausing Sheldon
Up for auction is a Lathe Carriage Handwheel. Logan Southbend Clausing Sheldon. In very good condition. 5" diameter. 1/2" hole with 1/8" key slot. I am always haapy to combine shipping. Thank you.
210 Logan 10" Lathe Tool Post Assembly
Up for auction is 210 Logan 10" Lathe Tool Post Assembly. In good condition. The opening measures 2" x 7/16" I am always happy to combine shipping. Thank you.
210 Logan 10" Lathe Change Gear Stud Assembly
Up for auction is a 210 Logan 10" Lathe Change Gear Stud Assembly. Complete and in very good condition. I am always happy to combine shipping. Thank you.
NICE!! LOGAN 14" VARIABLE SPEED TURRET LATHE - #6560H
aims NICE! LOGAN 14" VARIABLE SPEED TURRET LATHE- 6560H read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Logan Engineering Co. This is a Variable Speed Turret Lathe in good working condition. Model# 6560H Serial# 82818 Features: JFK 5C Lever Style Collet Closer w/ Nosepiece. Infinitely Variable Speeds. 3/1.5 Horsepower Motor. 6-Station Turret. Specifications: Swing: Swing Over Bed: 14" Swing Over Cross Slide: 9" Swing Over Compound: 3-1/2" Capacities: Distance from Floor to Center: 45-1/2" Distance Between Spindle and Turret: 40" Headstock: Spindle: 2-1/4" 8 tpi Spindle Bore: 1-3/8" Speed Range: 50 to 300 rpm(Back Gear) 350- 2,000 rpm(Direct Drive) Threads: Standard: 4 to 224 tpi. Carriage: Cross Slide Travel: 9-3/4" Compound ... moreSlide Travel: 4" Turret: Number of tool Stations: 6 Shank Diameter Capacity: 1-1/2" Bed: Width of Bed Face: 10" Length of Bed: 68" General: Motor: 3/1.5 Horsepower. 220 Volt, 1,600/850 rpm, 60 Hz, Three Phase Electrical: 220 Volt. Three Phase Overall Dimensions: 94" x 28" x 51" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! LOGAN 14" VARIABLE SPEED TURRET LATHE- 6560H NICE! LOGAN 14" VARIABLE SPEED TURRET LATHE- 6560H NICE! LOGAN 14" VARIABLE SPEED TURRET LATHE- 6560H NICE! LOGAN 14" VARIABLE SPEED TURRET LATHE- 6560H NICE! LOGAN 14" VARIABLE SPEED TURRET LATHE- 6560H NICE! LOGAN 14" VARIABLE SPEED TURRET LATHE- 6560H NICE! LOGAN 14" VARIABLE SPEED TURRET LATHE- 6560H NICE! LOGAN 14" VARIABLE SPEED TURRET LATHE- 6560H NICE! LOGAN 14" VARIABLE SPEED TURRET LATHE- 6560H NICE! LOGAN 14&quo
Logan Lathe 6" 4 Jaw Chuck with Key - Made in USA - 1 1/2 X 8 TPI - Atlas
Logan Lathe 6" 4 Jaw Chuck with Key Made in USA- 1 1/2 X 8 TPI This listing is for a Logan Lathe 6" 4 Jaw Chuck with Key- Made in USA- 1 1/2 X 8 TPI. With reversible jaws, very nice as seen in the photos.It is marked 444 on the front and dated 6/1956. The included key is shopmade. The lathe I took this off of was a model 210. Check my other listings under"Lathe Parts" I am happy to combine shipping to save you money-just let me invoice you before you pay. $9.95 SHIPPING anywhere in the USA. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden ... morethem down with more of it, but I leave feedback as soon as the buyer does!
LOGAN LATHE 11X30
Logan 940-2 lathe.11x30 2-1/4-8 spindle 5c collet closer 6" buck chuck 9" faceplate 6" dog plate live center 12 position tool post 3/4 motor 110/220 currently wired for 110 55"x30" overall length and width All speeds and feeds work Payment due with in 7 days of purchase Cash only SHIPPING IS AVAILABLE AT BUYERS EXPENSE
Logan 10" Model 821 Lathe Counter Shaft Pulley Assembly With Flat Belt
UP FOR SALE IS THE COUNTER SHAFT PULLEY ASSEMBLY OF A 10' LOGAN LATHE 821. IT MAY FIT OTHER LATHES. IT IS IN GOOD WORKING CONDITION. THE SHAFT HAS NO PLAY. SEE MY OTHER AUCTIONS FOR MORE MOTORS AND OTHER ITEMS. PAYMENT: Is expected within 7 days. I'm PayPal Verified) IF YOU HAVE A PAYPAL CONFIRMED SHIPPING ADDRESS THAT THE CARRIER WILL DELIVER TO; otherwise please pay a different way. I accept paypal. Cashier's check. SHIPPING: UNITED STATES AND CANADA ONLY. Package is about 16.00 pounds. And will be shipped from zip 33478. The least expensive method will be used, unless you request a different method and pay the difference. I charge what it costs me-nothing extra. I will combine shipping to save you money if you buy more items within a week-as long as they can go together in the same box. I ship most items the next weekday after ... morereceiving payment. Insurance cost is what the carrier charges, and is recommended. Without insurance, I'm not responsible once the package has left my hands. QUESTIONS: IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO CALL(954) 415-9744 any day from 8a.m. to 10p.m. eastern time. Powered by The free listing tool. List your items fast and easy and manage your active items.
LATHE 4.75" x 4.75" 4-WAY TOOLPOST - LOGAN CLAUSING SOUTH BEND MONARCH
This is a 4.75" x 4.75" 4-Way toolpost for a lathe. I can't see a makers name but it looks like good quality. Very good condition with only one clamp screw missing. Dimensions are shown in the pictures. Don't miss this as it includes FREE Priority shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being ... moreshipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
LOGAN LATHE 7515
LOGAN LATHE MODEL 7515 REVOLVER Electric Variable Speed Control Speed Drive 50-2000 RPM FWR and REV Push buttons 5c Collect Spindle Spindle Bore: 1-3/8" Electric cabinet. Overall is on excellent conditions. We'll throw few attachments that we have for free. PLEASE EMAIL TO REQUEST A FREIGHT QUOTE. If you like this item.Check out my! Payment: We Accept Paypal payments only within 3 days of auction end. Shipping: USA shipping available only. Items will be shipped after cleared received payment via USPS unless other stated. All items are Sold As Is. Doesn't mean they don't work, probably I'm not knowledgeable of the items and I don't know how to test them. But if you have any question, concern, or comment, please let me know. I'll do my best to answer all your questions and concerns. Sign up for; the fast. Easy, ... moreand secure way to pay online. Powered by The free listing tool. List your items fast and easy and manage your active items. 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13dfdf3b96a-0xff-
11" LOGAN lathe saddle
Saddle from a Logan 11" machine. Casting number is LA-1061. I can not tell you what models of logan 11" that it fits as it was on a 10" machine I purchased. I can tell you that the saddle itself is where they make the difference between a 10" and an 11" machine. The cross feed lead screw. Nut and dial are included. The overall condition is very good and the backlash on the leadscrew was low. The nut does rock a bit on the shaft with the crossslide removed, but when mounted it had minimal backlash. To me the slides etc. look good and it moved smoothly. As i stated the reason for selling this is that someone had put the wrong one on my 10"
Logan 64 Tooth Change Gear 10" / 11" Lathe model 200 210 800 900 1800 1900 Wards
This change gear came off a vintage 1944 model 200 lathe but is usable on 10" 200's. 210's, 800's, 1800's and 11" 900's& 1900's lathe as well as Wards Lathes. It is in Excellent operating Condition with NO Broken or Chipped teeth. If you have any questions please ask before bidding
LOGAN 10" LATHE 30 TOOTH FORWARD/REVERSE IDLER GEAR LA-216
This is a used idler gear with a new bushing for Logan 10" lathes. It is 16 dp. Has a 2.00" od, is.563 wide with a bushed bore of.625.
EARLY LOGAN 10" LATHE CROSS FEED CRANK/HAND WHEEL
Nice early Logan cross feed crank with 3/8 bore. This uses a pin into the keyway in the cross feed screw.
LOGAN 10&11" LATHE EARLY RACK GEAR W/LATCH LA-56
Early Logan 10" and 11" lathe rack gear with good latch.
HARDINGE LATHE 8-POSITION MICROMETER CARRIAGE STOP - LOGAN SOUTH BEND CLAUSING
This is an 8-position'stop' for lathe. Mill or grinder etc. I believe it's from a Hardinge lathe. Great quality and condition. It rotates and clicks into position nicely. Could be used on many different machines. Dimensions are shown in the pictures. Don't miss this as it includes super-fast FREE priority mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship ... moreVia USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
Logan Lathe part LA-340
This part is from a 10" Logan Lathe and is marked LA 340.
LOGAN 9" METAL LATHE 8 & 9" STEADY REST
Description: PLEASE READ COMPLETE LISTING FOR INFORMATION ON THIS! Here's a Logan 9" Steady Rest that came with a lathe we purchased. It matches and fits a logan 9-B-28-1 metal lathe but it was originally made for a 8" metal lathe. This has a spacer block pined to it to make it fit the 9" logan. Not sure what it originally came off of. Possibly an older 8" south bend lathe but not sure. The original casting measurement is 2 5/8" from the center of the V to the center of the flat on the other side. the V looks to be 5/16" deep on the original casting. Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me ... moreso we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for shipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
Gearbox handles for Craftsman lathe atlas southbend logan
Used quickchange gearbox handles from a 12 inch Craftsman Commercial metal lathe. Both handles have"10-1586" cast onto their sides. No gears. One handle is missing the plunger.
VERY NICE ORIGINAL LOGAN 9" 10" LATHE IDLER CHANGE GEAR BOLT STUD ASSEMBLY
Very Nice- Original Logan change gear stud assembly for a 9" or 10" Logan lathe. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
MT2 DEAD CENTER LATHE TOOL 4 SOUTH BEND ATLAS CRAFTSMAN LOGAN MACHINIST
Very Nice- MT2 dead center. Measures 3 7/8" long. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
EXCELLENT ORIGINAL LOGAN 10 MODEL 200 LATHE CHANGE GEAR BANJO BRACKET LA-227
Excellent Condition- Original change gear banjo bracket with bolt for a 10" Logan Model 200 lathe. Part LA-227. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOGAN WARDS 10" LATHE CARRIAGE DRIVE / LEAD SCREW END BEARING
Up for auction is a Logan 10" lathe carriage lead screw end bearing. Please look at the photo for condition I can email more pictures upon request. Thanks for looking. Posted with
SET OF (17) CHANGE GEARS - QUALITY LATHE MILL GRINDER ATLAS LOGAN SOUTH BEND
This is a used set of(17) change gears. They're in great condition with no damage but I have no idea what machine they were made to fit. What you see in the pictures is what is included. Exact dimensions of an 80T gear are shown in the pictures so you can work out the DP etc. The teeth and arbor hole(2 different sizes) sizes are also shown. All the gears are approximately 0.400" thick and they are all marked with a'z' after the tooth number(eg. 80Z. 72Z) Please feel free to ask questions if I've missed something. These are quality made gears and I'm sure they could be adapted for many purposes. Don't miss them as I'm including super fast FREE shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction ... moreend(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedba
2 Logan Lathe Counter-shaft Jack Shaft Spacers
Welcome I am selling 2 Logan counter-shaft spacers which came from a 10" lathe and fit a 3/4" spindle. I will be listing other parts from this lathe and will be happy to combine shipping when possible. Shipping will be a flat $5.00 within the lower 48 states. All others, please send your zip code. Questions/inspection/pick up are welcome. Thank you.
Logan 10" Model 200 Lathe Reverse Tumbler Assembly
Up for AUCTION is the following item 1- Logan 10" Lathe Model 200 PART as follows- Reverse Tumbler Assembly in good working order. I am currently parting out a Logan 10" Model 200 lathe unit was in good working order when I took apart. Please check my STORE for other listing. We will ship for discounted freight rates on multiple item winners. Please email any question before bidding if you have them I will respond ASAP! ALL International Packages MUST ship PRIORITY MAIL INSURED no exceptions. Powered by
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 36 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 36 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick. Outer diameter is 2 3/8" Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 72 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 72 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 4 5/8" outer diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 32 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 32 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 2 1/8" diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 24 TOOTH THREADING CHANGE STUD GEAR
Excellent Condition- Original Logan 24 tooth stud change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 1 5/8" outer diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 40 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 40 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick. Outer diameter is 2 5/8" Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 16 TOOTH THREADING CHANGE STUD GEAR
Excellent Condition- Original Logan 16 tooth stud change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick. Teeth are all in very fine order. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Logan Lathe 24 Tooth Threading Change Gear (LA-202) Wards 9" 10" 11"
24 tooth threading gear for a Logan lathe. I bought out the inventory of a lathe repair shop and these gears appear to be new old stock(they are still in the wrapper) However. Some are a bit dirty and/or stained, may have been lightly used, and they are being listed as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 64 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 64 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 4 1/8" outer diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 18 TOOTH THREADING CHANGE STUD GEAR
Excellent Condition- Original Logan 18 tooth stud change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick. Outer diameter is 1 1/4" Teeth are all in very fine order. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Logan 9" Lathe Countershaft Assembly LB-96 with built-in Motor Mount
Logan 9" Lathe Countershaft Assembly LB-96 with Motor Mount This listing is for a Logan 9" Lathe Countershaft Assembly LB-96 with built-in Motor Mount. It is in overall good condition as can be seen in the photos. It has a two-step pulley on the motor side and a 4 step pulley to the lathe. It is came with a Logan 9" Lathe. 9B17-1, serial number 71256 from 1957. For other lathe items click on"Lathe Parts" in my store. $24.95 SHIPPING anywhere in the lower 48 states. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with ... moremore of it, but I leave feedback as soon as the buyer does!
ATLAS LOGAN SOUTH BEND LATHE CARRIAGE WHEEL
Nice Logan carriage wheel. 1/2" hole with 5/32" keyway.
EXCELLENT CONDITION ORIGINAL LOGAN 10" MODEL 200 LATHE THREAD DIAL INDICATOR
Excellent Condition- Original Logan thread indicator dial for a Logan 10" lathe. Indicator dial is sharp and legible. Mounting bolt and washer are included. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOT OF 5 LATHE 5C COLLETS & CASES SOUTH BEND LOGAN ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand See Description Packaging In SB Cases Condition Very Good Quantity 5 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Two of the lids have cracks. See last picture. Porst.122" Royal 7/32" Unknown 11/16" Buck 3/4" Unknown 1 1/8" I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always ... morebuying and selling fine tools for the machinist and woodworker. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13e0b6df112-0xfb-
VERY NICE ORIG LOGAN 10 MODEL 200 LATHE SADDLE HANDWHEEL 3" DIAMETER LA-299
Very Nice- Original saddle handwheel for a Model 200 Logan 10" lathe. Interior bore is 3/8" with 1/16" keyway. Logan part number LA-299. Diameter is 3" In very fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
ORIGINAL LOGAN 10" MODEL 200 LATHE APRON MITRE GEAR PART LA-188-A
Original mitre gear with mounting hardware for a 10" Logan Model 200 lathe. Some light wear noted on gear teeth. Includes stud and mounting nut shown. Gear is Logan part number LA-188-A. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOT OF 4 LATHE SLEEVES ATLAS CRAFTSMAN LOGAN SOUTH BEND ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Various Packaging None Condition Good Quantity 4 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* MT 2 to MT 1 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
LOGAN 11 INCH LATHE ORIGINAL STEADY REST EXCELLENT SHAPE FINE USED ACCESSORY
LOGAN 11 INCH LATHE ORIGINAL STEADY REST EXCELLENT SHAPE FINE USED ACCESSORY Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge ORIGINAL LOGAN 11 INCH LATHE STEADY REST. SOLID USED SHAPE. 5 1/2 INCHES FROM BASE FLAT TO CENTER. SEE PICS FOR DIMENSIONS SO YOU CAN BE SURE YOUR MACHINE WI LL MATCH UP CORRECTLY. CLAMP WIDTH IS 3 1/4. CLAMP HAS PART# 11-1 27 CAST ON IT. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics. E5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13e0ccc6c07-0xfd-
LOGAN 10" LATHE TAILSTOCK WITH OILER AND CLAMP
LOTS OF AUCTIONS ONLINE NOW! Brand Logan Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
LOT OF 4 LATHE BORING / THREADING BARS ATLAS CRAFTSMAN LOGAN SOUTH BEND
LOTS OF AUCTIONS ONLINE NOW! Brand Atlas Packaging None Condition Excellent Quantity 4 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 1) 3/8" 2) 1/4" 1) 3/16" I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
Logan Metal Lathe Model 200 Screw Cutting and Turret Working Condition
Used Logan 200 metal working lathe. In metal working shop now if you want to inspect it. 55"W 30"D 52"Tall Best offer accepted. We Have a forklift to help load onto your truck or trailer. Posted with the
VERY NICE LOGAN 9" MODEL 400 LATHE IDLER CHANGE GEAR BOLT ASSEMBLY
Very Nice- Original change gear stud assembly for a Model 400 Logan 9" lathe. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOGAN 10 &11" LATHE PINION GEAR LA-550-1
Logan 10 and 11 inch lathe pinion gear. Good gear and hand wheel threads.
LOGAN 9 10 11" LATHE 72 TOOTH CHANGE/THREADING GEAR LA-214
Nice used 72 tooth Logan change gear used on all 9. 10 and 11" Logan lathes. 4.625 od, 438 wide with a.625 bore and a 5/32" key-way.
LOT OF 8 ARMSTRONG LATHE BORING THREADING BARS ATLAS CRAFTSMAN LOGAN SOUTH BEND
LOTS OF AUCTIONS ONLINE NOW! Brand Armstrong Packaging In Original Box Condition Very Good Quantity 8 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 4) 3/8" 2) 5/16" 2) 1/4" All stamped Armstrong. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 56 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 56 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 3 5/8" outer diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 54 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 54 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 3 1/2" outer diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOGAN 10&11" LATHE W/QUICK CHANGE GEAR BOXES HALF NUT ASSEMBLY
Nice Logan 10 and 11" lathe half nut assemblys showing very little wear. These will NOT fit plain apron machines. Only ones with quick change gear boxes. I've had a lot of these come through my shop and have thrown most of them away but, these are keepers. I'm listing two of these and there are no discernable differences between them. I'm tempted to pull the apron off my lathe and see if these are better than mine.
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 52 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 52 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 3 3/8" outer diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Logan Lathe Change Threading Gear 54T 16DP, 5/8" keyed Bore, 7/16" Face
SOTTOF SALES International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Gear in very good condition. May fit other lathes that uses this same pitch, face, and bore dimensions. D3193.1 PLEASE READ& UNDERSTAND ALL TERMS& CONDITIONS BELOW PRIOR TO BIDDING EBAY AUCTION POLICIES: Payment via Paypal. Must be received within seven days or item will be relisted. All items are being sold on an"As Is, Where Is" basis. No warranties implied or stated, unless specifically addressed in the listing. All sales are final. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements ... morehave been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please don't pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
LOGAN 10" LATHE REVERSE GEAR LA-217
Nice Logan 10" lathe reverse gear. LA-217. 30 teeth, 16 dp, 2.00 diameter, 563 wide with a.625 keyed hole.
Logan Lathe 32 Tooth Threading Change Gear (LA-203) Wards 9" 10" 11"
32 tooth threading gear for a Logan lathe. I bought out the inventory of a lathe repair shop and these gears appear to be new old stock. However. Some are a bit dirty and/or stained, may have been lightly used, and they are being listed as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
HEADSTOCK REDUCING SLEEVE ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE
LOTS OF AUCTIONS ONLINE NOW! Brand Unknown Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* MT 3 to MT 2 Sleeve I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*211fbc%3E-13e109a975a-0xf4-
LOGAN 9 10 11" LATHE 64 TOOTH CHANGE/THREADING GEAR LA-213
Nice used 64 tooth Logan change gear used on all 9. 10 and 11" Logan lathes. 4.625 od, 438 wide with a.625 bore and a 5/32" key-way.
Two Step V-Belt Motor Pulley for Lathe, South Bend, Logan, Atlas, Enco, Jet
3/4 Bore. 3/16 Key way. pulleys run straight. 2" Dia out side small pulley. 3 3/8 outside Dia. out side large pulley.
Logan Lathe 60 Tooth Stud Gear for 12" and 14" (LP-1068, 2248, 18A-32248) 2500
60 tooth stud gear for 12" and 14" 2500 series Logan lathes. I bought out the inventory of a lathe repair shop. These gears appear to be new old stock but may be stained and/or dirty and are being sold as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 48 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 48 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 3 1/8" outer diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 44 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 44 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick. Outer diameter is 2 7/8" Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
EXCELLENT ORIGINAL LOGAN 9" 10" LATHE 46 TOOTH THREADING CHANGE GEAR
Excellent Condition- Original Logan 46 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick. Outer diameter is 3" Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOGAN LATHE MOTOR PULLEY LA-1037
Logan motor pulley LA-1037. Used on most all 800 and 1800 models and on 11" floor and bench models. Must be used with counter shaft pulley LA-1036. Outer pulley is 5 1/4" and inner is 2 1/2" and has a 5/8" keyed bore. If you want a 3/4" bore, I can bore and broach a new key way at no cost if you let me know at time of purchase.
LOGAN 10" 1800 SERIES LATHE REVERSE HANDLE LA-137-2 FOR ASSEMBLY LA-4-2
Later 10" Logan Forward/Reverse handle with stud. This has the tapered pin and extra spring in the handle. It still has the oil felt in the keyway.
LOGAN 10&11" LATHE CHANGE GEAR STUD
Logan 10 and 11" complete change gear stud. Logan used several variations of these over the years so it's difficult to give them a part number but. They are all interchangeable.
LOGAN 10" 800 SERIES LATHE REVERSE HANDLE LA-1026 FOR ASSEMBLY LA-1025
Early 10" Logan Forward/Reverse handle with stud. This has the straight pin and no spring in the handle.
LOGAN 10&11" LATHE TAILSTOCK BINDING/LOCKING LEVER LA-177
Logan 10" and 11" lathe tailstock quill locking lever. 36`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*70%60%3E36%60-13e11a2fab4-0xfd-
LOGAN 800/1800 MODEL 10" LATHE SPINDLE GEAR LA-665-1
Nice Logan model 800 and 1800 10" lathe spindle gear. 30 teeth. 16 dp, 2.00 od, 1.313 bore.
LOGAN 10" 1800 SERIES LATHE COMPOUND/CROSS SLIDE SWIVEL LA-746
Later 10" Logan compound swivel. A couple of small dings but. Very legible index numbers.
Logan Lathe 60 Tooth Threading Change Gear (LA-212) Wards 9" 10" 11"
60 tooth threading gear for a Logan lathe. I bought out the inventory of a lathe repair shop and these gears appear to be new old stock(they are still in the wrapper) However. Some are a bit dirty and/or stained, may have been lightly used, and they are being listed as used. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
VERY NICE 6" FACE DOG PLATE LOGAN SOUTH BEND ATLAS CRAFTSMAN LATHE 1 1/2" 8 TPI
Very Nice- 6" diameter face plate. Thread mounting diameter is 1 1/2" x 8 TPI. Threads are in very fine order. Outside thickness 13/16" Nice heavy driver plate, in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Logan 9" 10" & 11 Metal Lathe 18 Tooth Change Gear 5/8" Bore 5/32 Keyway
Description: Here's a Logan 9" 10" 11 Metal Lathe 18 Tooth Change Gear with a 5/8" bore and a 5/32" keyway. This is 7/16" wide and in good used shape. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping than I may also go that route. I almost always give the buyer two options for shipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to ... morelook at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
ARMSTRONG & FAMOUS NO NAME *U.S.A.* LATHE DRIVE DOGS 1" SOUTHBEND LOGAN LEBLOND
UP FOR YOUR CONSIDERATION IS: ARMSTRONG& FAMOUS NO NAME*U.S.A. LATHE DRIVE DOGS 1" SOUTHBEND LOGAN LEBLOND. PURCHASED AT AN ESTATE SALE. 2- ARMSTRONG 1"D. 1- NO NAME 1-1/2"D. NO ID ENGRAVING. SOLD AS IS" REVIEW PICTURES FOR DETAILS. PLEASE TAKE A MOMENT TO BROWSE MY E-BAY STORE FOR ADDITIONAL UNIQUE ITEMS. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOGAN FOUR JAW 6" LATHE CHUCK w/ 2 1/4"-8 THREAD MOUNT
aims LOGAN FOUR JAW 6" LATHE CHUCK w/ 2 1/4"8 THREAD MOUNT read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Logan in U.S.A. This is a 4 Jaw Lathe Chuck in Good condition. Model# 440 Specifications: Unit has 4 jaws. Unit has a 6" Diameter. Unit has a 1 1/2" thru hole. Unit is 3 1/8" thick. Unit has a 2 1/4"8 Thread Mount. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LOGAN FOUR JAW 6" LATHE CHUCK w/ 2 1/4"8 THREAD MOUNT LOGAN FOUR JAW 6" LATHE CHUCK w/ 2 1/4"8 THREAD ... moreMOUNT Reliable Tool Inc. c 2011 | Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb%3A%60%3E-13e13cd1e27-0x102-
NICE LOT OF 39PC. 3/8" TOOL STEEL for Atlas Craftsman South Bend Logan lathe
This listing is for a lot of 37 pc. of 3/8" tool steel. Some are carbide tipped. Some are new. Names include Vasco. Rex, others. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
NICE LOT OF 28PC. 1/2" TOOL STEEL for Atlas Craftsman South Bend Logan lathe
This listing is for a lot of 28 pc. of 1/2" tool steel. Some are carbide tipped. Some are new. SPI. ACT, Rex and others. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
Vintage 3 Joint Machinist Industrial Age Lathe Work Light Lamp Adjustable Logan
Vintage 3 Joint Machinist Industrial Age Lathe Work Light Lamp- Adjustable This listing is for a Vintage 3 Joint Lathe Work Light. Stretched out. It measures 36" tip to tip, and the base is rectangular, 1" X 3" with slots for screws roughly 2" apart. It is in overall good condition with the following issues: The white enamel or porcelain inside the shade has cracked where it is closest to the bulb. But this is hidden when there is a bulb in place as you can see in the photos. Much of the(greenish) machinery gray paint is present. But the light shade was painted red at some time in the past; most of this has been removed and the rest can be easily taken off if desired. At the joint at the middle of the lamp the rod fits a little too loosely into the ball. All it needs is a piece of paper or tape wrapped around the rod to ... moretighten it up when it is re-inserted. The light socket is not original and is missing the switch handle. You can easily replace the socket with a new one or just screw a handle on the switch. The cord may be original and is still supple. But you might consider replacing it if you replace the socket. It is a nice lamp that came with an old Logan 9" Lathe. But I don't know what brand it is since there are no markings that I can see. For other lathe items click on"Lathe Parts" in my store. $10.95 Priority SHIPPING anywhere in the USA. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!
MONTGOMERY WARD 4TLC-700A LOGAN 10" MODEL 200 LATHE REVERSE TUMBLER GEAR ASSY
FOR SALE IS THE REVERSE TUMBLER ASSEMBLY OF A MONTGOMERY WARD 4TLC-700A LOGAN 10" LATHE. IT WILL ALSO FIT MODEL 200 AND SOME OTHERS. IT IS IN VERY GOOD WORKING CONDITION. YOU WILL GET THE PART JUST LIKE YOU SEE IT IN THE PICTURE. SEE MY OTHER AUCTIONS FOR MORE LATHE PARTS AND OTHER INTERESTING ITEMS. PAYMENT: Is expected within 7 days. I'm PayPal Verified) IF YOU HAVE A PAYPAL CONFIRMED SHIPPING ADDRESS THAT THE CARRIER WILL DELIVER TO; otherwise please pay a different way. I also accept cashier's check. Remember to give your shipping address and phone# FOR INTERNATIONAL BUYERS PAYPAL ACCOUNT REQUIRED. BUYER TO PAY CUSTOM FEES IF ANY REQUIRED. SHIPPING: For this item will be $11.35 USPS PRIORITY Mail with Delivery Confirmation. Insurance(if desired) will be an additional $1.75 I ship most items the next weekday after receiving ... morepayment. i will combine shipping to save you money if you buy more items within a week- as long as they go together in the same box. QUESTIONS: HOME PHONE/FAX: 954) 428-6575 CELL PHONE: 954)415-9744 PLEASE CALL any day from 8 a.m to 10 p.m. Eastern time. THANK YOU FOR LOOKING AT MY AUCTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items.
9" CUSHMAN 3 JAW LATHE CHUCK SOUTH BEND ATLAS CLAUSING LOGAN CRAFTSMAN
9" CUSHMAN 3 JAW LATHE CHUCK THROUGH HOL E IS 2 3/4" IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is 100% and I aim to keep it that way by WORKING WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ... moreALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE EVERY PART FOR A 14" ROCKWELL/ DELTA BAND SAW AND NO TIME TO LIST THEM ALL. IF THERE IS SOMETHING YOU NEED PLEASE SEND ME AND E-MAIL AND I'LL GET IT FOR YOU. I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR.
Ward's/Logan Lathe Graduated Collar 1" Diameter
Up for auction is a Ward's/Logan Graduated Collar. 1" diameter with 3/8" hole. In very good condition. I am always happy to combine shipping. Thank you. I:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13e162618cd-0xf5-
Buck Ajust Tru / Logan 4733 Lathe Chuck
You are bidding on the item shown. It’s in good used condition. P lease see pictures and email me with any questions. See my other auctions; I will combine shipping when possible. If you have a question. Please ask it BEFORE the auction ends! Payment required within 2 days. No local pickup. No buy it now. PayPal only.
LOGAN 10'' LATHE 820 COMPOUND LOWER SWIVEL
UP FOR SALE IS THE COMPOUND LOWER SWIVEL OF A 10' LOGAN LATHE 820. IT MAY FIT OTHER LATHES. IT HAS A VERY SMALL CHIP. WILL NOT AFFECT THE FUNCTIONALITY( SEE PICTURE NO.5) OTHER THAN THAT IT IS IN VERY GOOD CONDITION. SEE MY OTHER AUCTIONS FOR MORE MOTORS AND OTHER ITEMS. PAYMENT: Is expected within 7 days. I'm PayPal Verified) IF YOU HAVE A PAYPAL CONFIRMED SHIPPING ADDRESS THAT THE CARRIER WILL DELIVER TO; otherwise please pay a different way. I accept paypal. Cashier's check. SHIPPING: UNITED STATES AND CANADA ONLY. Package is about 3.5 pounds. And will be shipped from zip 33478. The least expensive method will be used, unless you request a different method and pay the difference. I charge what it costs me-nothing extra. I will combine shipping to save you money if you buy more items within a week-as long as they can go together ... morein the same box. I ship most items the next weekday after receiving payment. Insurance cost is what the carrier charges, and is recommended. Without insurance, I'm not responsible once the package has left my hands. QUESTIONS: IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO CALL(954) 415-9744 any day from 8a.m. to 10p.m. eastern time. Powered by The free listing tool. List your items fast and easy and manage your active items.