In 
 
Order by: 
Available to: 
Price: 
 - 
$
235
Buy It Now
$14.85 Shipping
Condition: Used
Location: Appleton,WI,USA
$
549.99
Buy It Now
$0 Shipping
Condition: Used
Location: Albuquerque,NM,USA
$
795
Buy It Now
$67.85 Shipping
Condition: New – Open box
Location: Appleton,WI,USA
$
599
Buy It Now
$55 Shipping
Condition: Used
Location: Milwaukee,WI,USA
$
45
Buy It Now
$8 Shipping
Condition: New
Location: Fremont,CA,USA
$
149.95
Buy It Now
$22 Shipping
Condition: New
Location: Saint Charles,IL,USA
$
33.49
Buy It Now
$7.5 Shipping
Condition: New
Location: San Jose,CA,USA
$
39.95
Buy It Now
$12.95 Shipping
Condition: New
Location: Las Vegas,NV,USA
$
825
Buy It Now
$55 Shipping
Condition: New
Location: Vista,CA,USA
Sherline's Deluxe Model 5400 Mill. The larger of Sherline's mills. It works well, as Sherline's tools always do. Here is your chance to get ... moreinto the hobby with great savings! Already set up for the horizontal milling attachment! The supporting block for the vertical riser is already in the two pieces needed for the horizontal milling attachment. This mill includes a laser engraved 12" 305mm) solid aluminum base for 2" or additional Y-axis travel. Precision machined dovetailed slides with adjustable gibs. Adjustable preload anti-backlash feed screws on the X- and Y-axes, laser engraved scales on the table and base. 2-1/2" 63mm) adjustable“zero” handwheel on the Z-axis and 2" 51mm) adjustable“zero” handwheels on the X- and Y-axes, a mill headstock spacer(P/N 1297) to provide more throat distance and a 1/4" drill chuck and drawbolt(P/N 3072) All Sherline mills feature precision machined dovetailed slides with adjustable gibs. Permanently lubricated spindle bearings, and a high-torque 90 VDC motor with electronic speed control. Speed is continuously variable from 70 to 2800 RPM without gear or belt changes. A second pulley position is also available to provide extra torque at low RPM if needed. This machine has some scratches and nicks in the black finish. You can see them in the photos. It is a used tool so it is sold as is. We will pack it carefully for shipping. Check out my other items. Lots of Sherline things. I will combine shipping. Too.
$
189
Buy It Now
$22 Shipping
Condition: New
Location: Saint Charles,IL,USA
$
269.95
Buy It Now
$0 Shipping
Condition: New
Location: Santa Ana,CA,USA
$
1,149.95
Buy It Now
$50 Shipping
Condition: New
Location: Vista,CA,USA
$
1,295
Buy It Now
$55 Shipping
Condition: New
Location: Vista,CA,USA
$
1,039
Buy It Now
$65 Shipping
Condition: New
Location: Vista,CA,USA
$
3,197
Buy It Now
$75 Shipping
Condition: New
Location: Vista,CA,USA
$
59.75
Buy It Now
Free Shipping
Condition: New
Location: Newport News,VA,USA
$
2,235
Buy It Now
$55 Shipping
Condition: New
Location: Vista,CA,USA
$
1,099
Buy It Now
$45 Shipping
Condition: New
Location: Vista,CA,USA
$
1,427
Buy It Now
$65 Shipping
Condition: New
Location: Vista,CA,USA
$
1,324
Buy It Now
$75 Shipping
Condition: New
Location: Vista,CA,USA
$
2,795
Buy It Now
$95 Shipping
Condition: New
Location: Vista,CA,USA
$
1,427
Buy It Now
$65 Shipping
Condition: New
Location: Vista,CA,USA
$
1,149.95
Buy It Now
$50 Shipping
Condition: New
Location: Vista,CA,USA
$
3,295
Buy It Now
$75 Shipping
Condition: New
Location: Vista,CA,USA
$
1,669
Buy It Now
$75 Shipping
Condition: New
Location: Vista,CA,USA
$
2,795
Buy It Now
$95 Shipping
Condition: New
Location: Vista,CA,USA
$
389.95
Buy It Now
$24.5 Shipping
Condition: New
Location: Vista,CA,USA
$
1,295
Buy It Now
$55 Shipping
Condition: New
Location: Vista,CA,USA
$
1,669
Buy It Now
$75 Shipping
Condition: New
Location: Vista,CA,USA
$
3,343
Buy It Now
$0 Shipping
Condition: New
Location: Vista,CA,USA
$
2,319
Buy It Now
$85 Shipping
Condition: New
Location: Vista,CA,USA
$
2,549
Buy It Now
$95 Shipping
Condition: New
Location: Vista,CA,USA
$
1,450.95
Buy It Now
$35 Shipping
Condition: New
Location: Brooklyn,NY,USA
$
3,000
Buy It Now
$250 Shipping
Condition: New – Open box
Location: Guthrie,OK,USA
$
2,039
Buy It Now
$85 Shipping
Condition: New
Location: Vista,CA,USA
$
750
Buy It Now
$40 Shipping
Condition: New – Open box
Location: Mission Viejo,CA,USA
$
2,649
Buy It Now
$75 Shipping
Condition: New
Location: Vista,CA,USA
$
3,449
Buy It Now
$95 Shipping
Condition: New
Location: Vista,CA,USA
$
2,319
Buy It Now
$85 Shipping
Condition: New
Location: Vista,CA,USA
$
115
Buy It Now
$10 Shipping
Condition: New
Location: Salem,MA,USA
Years ago I came up with a crazy idea that didn't quite pan out the way I expected. And now I got a bunch of New, Unused Sherline equipment that I'll ... morenever get around to doing anything with. so my loss is your gain! What you are bidding on is an unopened Sherline P/N 3750 Tilting Angle Table. The current price from Sherline is $110. And my starting bid is 2/3rds that and likely below a dealer's cost. It was taped shut at the Sherline factory and has not been opened since, so nothing should be missing. But because mistakes can happen, if you would like, for the winning bidder I can open the box to verify it's contents and send you a picture of it's condition before shipping. I've also included a copy of Sherline's picture off their web site so you can see what is suppose to be inside the box. Here is a link to Sherline's web page describing the table: And here is a link to Sherline's instructions on how to use the table: html Version(Web siteversion) pdf Version(The sameas our printed instructions. Requires program to view. If all works out with this auction. There will be an option for shipping via ebay's shipping calculator. I_will_ combine shipping to save you shipping costs, and if you ask, I can try to see if I can find a cheaper shipping option than ebay provides. And if for ANY REASON you are not 100% happy with your purchase. PLEASE CONTACT ME! I'm sure we can work something out to correct whatever problem. Please check my other listings over the next few days as I have a_lot_ to sell. Below is the description from Sherline's web site: About theTilting Angle Table. Thisaccessory offers a great variety of setup options. With the base mounted squareto the mill table. Parts mounted to the tilted table can be machined or drilledat precise angles. It can be set at any angle from 0° to 90°. The hole patternin the table accepts Sherline’s mill vise and rotary table. A threaded chuckmount is also included, which means parts from the lathe can have machining
$
2,649
Buy It Now
$75 Shipping
Condition: New
Location: Vista,CA,USA
$
497
Buy It Now
$20 Shipping
Condition: New
Location: Battle Creek,MI,USA
$
497
Buy It Now
$23 Shipping
Condition: New
Location: Battle Creek,MI,USA
$
99
Buy It Now
$10 Shipping
Condition: New
Location: Fremont,CA,USA
$
2,595
Buy It Now
$95 Shipping
Condition: New
Location: Vista,CA,USA
$
950.95
Buy It Now
$35 Shipping
Condition: New
Location: Brooklyn,NY,USA
$
747
Buy It Now
$25 Shipping
Condition: New
Location: Battle Creek,MI,USA
$
3,744
Buy It Now
$0 Shipping
Condition: New
Location: Vista,CA,USA
$
2,439.95
Buy It Now
$35 Shipping
Condition: New
Location: Brooklyn,NY,USA
$
298
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Temecula,CA,USA
$
2,595
Buy It Now
$95 Shipping
Condition: New
Location: Vista,CA,USA
$
1,465.95
Buy It Now
$35 Shipping
Condition: New
Location: Brooklyn,NY,USA
$
2,375
Buy It Now
$95 Shipping
Condition: New
Location: Vista,CA,USA
$
369
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
2,795.95
Buy It Now
$35 Shipping
Condition: New
Location: Brooklyn,NY,USA
$
274.95
Buy It Now
$0 Shipping
Condition: New
Location: Santa Ana,CA,USA
$
4,695
Buy It Now
$0 Shipping
Condition: New
Location: Vista,CA,USA
$
393.95
Buy It Now
$19.95 Shipping
Condition: New
Location: Vista,CA,USA
$
34.68
Buy It Now
$7.28 Shipping
Condition: New
Location: Newport News,VA,USA
$
2,375
Buy It Now
$95 Shipping
Condition: New
Location: Vista,CA,USA
1 2 3 4 5 6
 In 

Past Items  
 
Up for bid is one used 4" Sherline milling rotary table. It's in great shape. Only some slight nicks on the table. $270 new Included are: one 4" rotary table. 4 hold down screws, 2 clips Posted with
We are selling our barely-used Deluxe 8-Direction CNC Sherline Mill simply because we no longer need it. It's in like-new condition with original accessories and cutting tools included. PLUS a 4th axis rotary table and computer! We purchased this as a CNC-ready mill with a conversion kit. And installed the motors and handwheels, so it's ready to go. All you have to do is plug the driver box into the computer and install the software of your choice. Included accessories: 1072 1/4" Jacobs Drill Chuck 3013 Step Block Hold-down Set 3020 5/32" Sherline Hex T-Driver 3021 3 pc. Center Drill Set 3052 Fly Cutter w/ Carbide bit 3060 3-pc. Mill Collet Set w/ Drawbolt 3079 3/8" End Mill Holder 3551 Milling vise 5327 Sherline Accessories Shop Guide book 7401 6-pc. 3/8" Shank End Mill Set 8730 4th axis Rotary Table with stepper ... moremotor and motor mount HP desktop computer: Intel Pentium D Dual Core 3.4GHZ; 1GB RAM; 80GB hard drive The below is information from Sherline's website: Rotary Table- Brand New The pre-soldered 5-pin connector on the 135 oz-in. 2 amp stepper motor plugs right in to the connection cables that come with a Sherline CNC system or the 8760 driver box, making it fast and easy to get up and running. Driver Box(8760) Software(8326) The 8760 driver box has output cables for X- Y- Z- and A-axes. It also includes an input cable that connects to the 25-pin parallel(printer) port on your computer. Included with the driver package is a 4 amp power supply and a 2-CD set with the Linux OS and EMC 4-axis software ready to install on your computer if you choose. Minimum requirements for the software include 800 MHz or faster CPU, 256MB RAM, and 25-pin parallel port for connection of external 8760 driver box. Let us know if you have any questions. And happy bidding!
UP FOR GRABS! Wife wants a Jacuzzi! This is my trusted Lathe and Mill CNC Sherline Combo Unit. It's in excellent condition and I had bought the lathe not more then 6 months ago and the only thing I did was set it up on my table and do a few turns! You get everything on the table EXCEPT, the weight scale on the left and the allen wrenches on the right(grey and red handles) Includes: PC Computer running windows XP WITH WIFI ADAPTER! MACH 3 Software to turn and Mill 19" Monitor Keyboard and Mouse Sherline CNC Mill Ready to GO 2 Live Center Holds 2 3/8 Drill Holders 3 Collets(1/4, 1/8 and 5/16) A Brand NEW Rotary table that I never got to use. A sign Gauge for angles A mini chuck vise Boring Adapter Fly Cutter Adapter Single Insert Fly cutter 9 different drills for the Mill All Manuals Assorted Stock Materials Upgraded 10,000 RPM Spindles ... moreSherline CNC Lathe Ready to GO Stock Holder NEW QUICK CHANGE ADAPTER For tools Both are plug and Play CNC, However there is only one controller in the PC so when you want to use one, you have to unplug the X,Y,Z for one and plug in the mill or lathe. They cant both be plugged in at the same time) Please ask any questions! I will ship this FREE! Please give me at least 3 days to ship so I can pack it properly)
This is Sherline Model 5000 Vertical Milling Machine. Very good used condition and works fine. Comes with chuck key and what is shown in the pictures. No other parts or other attachments. Please see attached pictures for more details. Selling what shown in the pictures only. Thank you. PLEASE NOTE: Returns will be accepted if item is not as stated or described. Buyer must contact me via ebay mail within 2 days of receiving the item to qualify for refund. Refund will be sent when the item is returned to us in the same condition as sent to you and must be returned within 7 days. Please contact me with any questions or concerns. Thanks PLEASE NOTE: Shipping charges quoted is for USPS Parcel Select as they are the least expensive. If you want to receive your item faster. You will have to pay for the additional cost. Includes tracking no but Insurance ... moreis an option and it is highly recommended. It is the buyers responsibility to decide if he/she wants to insure there purchase. Buyer must notify immediately any and all shipping damage with the carrier. We only sell and ship to the lower 48 states. Another important NOTE: We mostly sell preowned items and returns will be accepted if item is not as stated. Buyer must contact me via ebay mail within 2 days of receiving the item for us to accept an item return for refund. A refund will be sent when the item is returned to us in the same condition as sent to you and must be returned within 7 days. Please contact me with any questions or concerns. Thanks If you are in California and item is shipped to California sales tax for California will be added. Powered by The free listing tool. List your items fast and easy and manage your active items.
Custom(7) piece mandrel set made from 6061-T6 Aluminum and Delrin. These have 3/8" and larger round shanks and a few aluminum have square 3/4" bodies also. You can use as is or machine to your own sizes. Used with washer and 10-32 screws to hold thin wall parts from centerline. i.e. a lined ring runs concentric best from a mandrel to keep the wall thickness even. I added some screws and wood washers for clamping. Also included are some Solid Oak Ring samples various sizes. Lacquer finished. Posted with
This auction is for a lot of 12 Cobalt& HSS Double ended end mills in 3/8" shank. 2& 4 Flutes These end mills are made by Sossner. Quinco, Putnam, OSG(Japan) Melin, and others Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment. Pictures Below show items being auctioned from different angles and next to a ruler to show size
GEMSYMONS ESTATE TREASURES GOLD& SILVER MAKE A GREAT GIFT OR INVESTMENT VALUE HAS NEVER BEEN BETTER.99 CENTS OPENING BID ALL ITEMS NO RESERVES! WE OFFER A TRUE ABSOLUTE AUCTION EVERYONE GETS AN EQUAL CHANCE All items are estate items. They may be new or used, but it will be clearly stated which. We sell nothing damaged or broken. No jewelry items are plated or filled unless clearly stated. We take pride in all the items we sell and want every transaction to be a happy one. We offer a 14 day no questions asked return policy. We value our feedback, so please contact us prior to leaving less than positive feedback so we may correct any problem you may have with your purchase. We are not perfect but we try our best to please our buyers. My name is Les and I will be happy to help any way I can. Thanks For Your Business! ITEM UP FOR AUCTION ... moreDESCRIPTION: Sherline 1041 2.5" 3 Jaw Self Centering Chuck(3/4- 16) Machinist Tool(Great Shape. Very Little Use) SPECIAL NOTE: THIS ITEM IS TOP QUALITY. IN PERFECT WORKING CONDITION AND CAME FROM A HIGH END MACHINE SHOP E STATE. IT S IN GREAT OVERALL SHAPE. PLEASE CHECK OUT OUR OTHER AUCTIONS THEY DON'T COME ALONG THIS NICE THAT OFTEN. THESE ITEMS ARE BEING OFFERED WITH NO RESERVE! THIS IS A GREAT CHANCE FOR ALL OUR BUYERS TO GET SOME OF THE BEST WE HAVE TO OFFER. MOST SITES WOULD LIST TH IS ITE M WITH A RESERVE TO START! THIS ITEM WOULD MAKE A GREAT GIFT OR ADDITION TO YOUR BUSINESS. TOP QUALITY& MADE TO LAST. SIMPLY THE BEST! SORRY NO INTERNATIONAL BIDDING ON THIS ITEM U.S. BIDDING ONLY PAYMENT POLICY ALL PAYMENTS MUST BE MADE WITH 7 DAYS OF AUCTION END ALL PAYMENTS MUST BE MADE BY PAYPAL WE RESERVE THE RIGHT TO RELIST ANY ITEM AFTER 7 DAYS OF AUCTION END THAT IS NOT PAID FOR SHIPPING POLICY ALL ITEMS ARE SHIPPED WITH 3 DAYS OF AUCTION END $ 4.99 WILL BE CHARGED FOR THIS ITEM NO COMBINED SHIPPING FREE COMBINED SHIPPING ON JEWELRY ITEMS ONLY UP TO 7 DAYS FROM FIRST PURCHASE NO COMBINED SHIPPING ON NON-JEWELRY ITEMS RETURN POLICY ALL RETURNS MUST BE MADE WITHIN 14 D
Machinist Setup Gage Blocks Sherline Milling Jo Blocks Taig Emco Unimat Prazi 42 All pictures are of actual item for sale. Get these while you can as we have a limited supply. These came out of some million dollar dies at the local semi conductor fab. This auction is for the 1 block in the photos. Precise stuff. These are hardened and ground and are of very high quality. Many cut with wire EDM. Quite handy for getting good solid holds on material on my small milling machine. They are nice and flat and square and make getting stock setup much easier so the fun part can begin. These are very precise and have proven handy for precise work for holding something just right while milling or using an arbor press where squareness is quite important for getting a smooth fit. gsrx_vers_486(GS 6.5.1(486)
UP FOR AUCTION IS A BLACK DELRIN ACETAL SHEET REMNANT 1" THICK BY 12" LONG BY 6 1/2" WIDE. LEFT OVER FROM A PREVIOUS PROJECT. All measurements are within +- 1/8" I am usually on the plus side. Please have a look at my other Delrin Sheet Auctions. E mail me with any questions as I try and check it several times throughout the day. I do indeed combine Shipping! I do in most cases ship quickly. I ship USPS or UPS in the US. Please check my feedback and Bid with Confidence. I accept Paypal. Transaction must be completed within 3 days after end of auction. Powered by The free listing tool. List your items fast and easy and manage your active items.
UP FOR AUCTION ARE 8 PIECES OF SCRAP BLACK DELRIN ACETAL SHEET REMNANTS. All measurements are within +- 1/8" I am usually on the plus side. Pieces Measure: 1 pc. 11 7/8" at its longest side x 2 1/2" 6 1/2" at its shortest side x 5 3/16" x 1/2" 3 pcs. 13 1/2" X 1/2" X 1/2" 4 pcs. 6 7/8" X 1/2" X 1/2" Please have a look at my other Delrin Sheet Auctions. E mail me with any questions as I try and check it several times throughout the day. I do indeed combine Shipping! I do in most cases ship quickly. I ship USPS or UPS in the US. Please check my feedback and Bid with Confidence. I accept Paypal. Transaction must be completed within 3 days after end of auction. Powered by The free listing tool. List your items fast and easy and manage your active items.
Here's a 3/8" 1BA drill chuck that will include the key. two) 1 Morse Arbor, Drawbolt, for Sherline lathes. Used but in good working condition. Drawbolt is in brand new(never used) condition. Sherline P/N 3072. Please refer to photos. If you have any questions about this item. Feel free to contact me. Check out my other listings for more great items, and more Sherline!
This auction is for a lot of 19 mini lathe cutter bits in 5/16" shank. Makers: Rex aa. Rex aaa, M2, Mohawk Extra, some are not marked Many bits have custom cutting profiles ground into them Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show auction items from different angles and next to a ruler to indicate size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
Quality Liquidators Sherline CNC Paxton/ Patterson Lathe ++ NICE ++ About the Item Paxton/ Patterson CNC Training Center This sale is for a Nice Paxton/ Patterson CNC Training Center Lathe. Unit does not come with software but still works great for manual operation. This is very clean and comes with the accessories pictured. Items are sold"As-Is" unless otherwise stated. I am not familiar with all of the products I list and I do not have the time or ability to completely test each one. I will list what information I have and the condition of the item to the best of my ability. Items are in used condition unless otherwise stated. This means that items may or may not have scratches. Dings, dents, scuffs, marks, cracks, scrapes, discoloration, dust, dirt or other conditions related to use and or transport. I will attempt to note any ... moremajor damage in the listing. There are no warranties or guarantees unless specifically stated in the listing. Seller is not responsible for errors in the technical description of item. Model numbers are provided with equipment and the buyer will be responsible for knowing the capabilities of equipment. Items do not come with documentation, drivers, cords, keys, attachments, accessories, consumable or support unless stated in the listing. Thank you About Payment and Shipping Unit will be boxed and palletized. Buyer is responsible for all shipping arrangements and costs from zip 29588. After purchasing. Pay instantly with your credit card through PayPal About the Seller Please see my other auctions here: Powered by The free listing tool. List your items fast and easy and manage your active items.
Scantek 2000 Scanmill Model: Micromill 2000 CNC Vertical Milling Machine w/ Sherline Motor Specifications: Model: Micromill 2000. Spindle Motor: Sherline 90V 0.5 HP DC Motor. Stepping Motor: Step-Syn 2A DC Motor. No Software Included. You are bidding on a used Scantek 2000 Scanmill Micromill 2000 CNC Vertical Milling Machine. This item is being sold for parts or non-working because I received it in a large surplus acquisition and have no way of testing it. Unit has minor scuffs and scratches and may need repairing to get running properly. All items are described to the best of our knowledge. We are equipment resellers. Not professional technicians. Please e-mail us with any questions. USA Bidders Only Due to the size of the unit I will ship on a pallet. Item will be packed well. Buyer is to pay for shipping. If you want me to get the shipping ... morequote I will need a zip code as well as details for shipping. Contact# Loading dock or lift gate, etc. Please email me with any questions. All buyers located in Georgia will pay 7.0% sales tax. Buyer can Pay with: Paypal. I cannot ship to a P.O. Box. USA Bidders Only. Thanks. You are buying used electronics from a company that has a zero land fill policy. Any old or obsolete equipment should be returned for proper electronic recycling. Powered by The free listing tool. List your items fast and easy and manage your active items.
All parts interchangeable with Sherline. Light Machines. I believe, bought the basic machine from Sherline, and typically outfitted them for CNC, mostly for trade school usage. This one is manual and works very well. The cross slide is a little heavier for milling purposes. Headstock/motor can easily be moved to the bed to convert to lathe use, which makes this model very versatile. Comes with a 3/8" milling cutter holder and drawbar, milling vise and four hold-down clamps. Motor is strong, quiet, variable speed and capable of high speed for plastics or wood. Attractive thick, sturdy base with rubber feet can be included or not, at your choosing. o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13e4daab133-0xf3-
This is part# 3053 and is for the Sherline 5411 metric mill. Ipreviously sold the complete unit on ebay but it was destroyed by UPS inshipping to Florida and then returned to me. I am selling this as used butin working condition. Please check out the other parts
Ebay Base This auction is for 20 cobalt alloy lathe cutter bits in 3/8" shank. These high quality bits are Rex95& RexAAA made by Crucible. Circle C by Firth Sterling. Mo-Max Cobalt by Cleveland Twist Drill. All the bits have custom cutting profiles ground into them. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
This hand wheel was removed from a new lathe(to replaced with 100 increments wheel) Fit 1/4" diameter shaft set screw lock 1-5/8" straight knurled wheel diameter with crank handle 1" diameter dial with 50 increments marking 1.430" overall length
Sherline Hobby Mill table XY Stage Posted with
This is a Sherline 2.5" 3 Jaw self centering chuck with 3/4"16 mount. This auction ALSO includes a set of soft jaws! This one appears that it might have been lightly used. Jaws are perfect as is the chuck but there are some very light scratches that indicate it might have been used. See my other auction for another 1041 which is in new condition. If you have any questions feel free to contact me.
Use your Sherline Lathe to turn wood pens or other freehand turnings with this nice set of tool rests. Very gently use in excellent condition with no rust. Sherline MSRP is $55.00. Will ship via USPS priority mail to The USA only. Onlyactual shipping charges apply. Thanks for looking. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e6e5204fb-0x105-
For sale used Sherline table XY mill milling table Posted with
Notes: this is everything you need to put a drill chuck on the Sherline Head Stock or Tail Stock. Condition: Very Nice. Sold as shown GET MORE INFORMATION: $$ My Self Serving Advertisement $$ See my 10-32 Cap Screw Assortments for the Sherline Mill and Lathe Shipping: Charges will be a flat rate to the US Only. Nowhere else. I ship from Ann Arbor. Michigan 48103. That's all I can tell you. I'm not an engineer. I accept Paypal(preferred) and personal checks(domestic buyers only) Please allow extra time for non-Paypal funds to clear. Returns: Policy Updated 2012 I offer a 30 day money back refund(excluding shipping) for Any Reason but you must return the undamaged item to me at your expense! In the event. I made a mistake in the listing. I offer a full money back refund(with shipping both ways) but you must return the undamaged item ... moreto me. I do not offer partial refunds and or replacements; I only offer my refund policy as stated above. In the event of loss or damage in shipping(that is out of my control) You agree in advance to cooperate so I can file an insurance claim for the loss or damage and issue a refund to you. If you win this auction. You will be expected to execute a paypal transfer OR send a check to me within 24 hours. DISCLAIMER You may think you see more than what is written herein; all invisible items. Like smiley faces and brightly colored objects are excluded from this auction; if you can see these things, you may have a serious retinopathy which may require emergency brain surgery and refrigeration; DO NOT DELAY; Contact your Physician immediately!
This auction is for a lot of 15 HSS& Cobalt Single ended end mills with 2& 4-flutes and 3/8" shank some of these mills were a double ended with one broken end. They are left with one good end making them a single ended end Mills Various makers including Weldon. Morse, ITW, B&S, and others One mill made in India. One in Yugoslavia, and one made in Spain Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures show the same items from different angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
This auction is for a lot of 20 mini lathe cutter bits in 1/4" shank. Makers: Rex aaa. Circle C, Armstong, Mo-Max, Rex 95, some are not marked Many bits have custom cutting profiles ground into them Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show auction items from different angles and next to a ruler to indicate size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
T his auction is for a lot of 18 mini lathe cutter bits in 3/8" shank. Makers: Rex aaa. Vasco Supreme, circle C, and others most bits have custom cutting profiles ground into them. One bit is carbide tipped Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show items from different sides and angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
Ebay Base This auction is for 17 cobalt alloy mini lathe cutter bits in 5/16" shank. These High quality bits are Rex 95& Rex AA made by Crucible. Mo-Max Cobalt made by Cleveland twist drill. Crusader by Chicago Latrobe. All the bits have custom cutting profiles ground into them. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
Ebay Base This auction is for 15 Cobalt alloy HSS mini lathe bits in 1/4" shank. These high quality bits are Mo-Max Cobalt by Cleveland Twist Drill. Rex 95. Rex AA& Rex M-2 by Crucible. Vasco Supreme T-15 by Vanadium Alloys and others. Most are sharp and ready to use. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each picture shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
This auction is for 1 32 Taper End Mills Machinist Gunsmith Sherline Milling Tools Lot Best Offers Responded to within 24 hours. We are a seller and buyer of industrial equipment with over 35 years experience. Purchase our products with confidence. If you are not satisfied returns are gladly accepted. Contact us about all of your industrial equipment needs: All best offers on Ebay will be responded to within 24 hours. Thanks for looking! My Policies: 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and we will try to work it out with you. We usually ship the next business day after payment is received. We also offer Expedited shipping on all products. Look under shipping options near the top of the page. We reserve the right to ship via the fastest and most affordable ... moremethod for our customers. We will always try to combine shipping. Although we will add a small supplies charge to each shipment to cover costs. Checkout my feedback and buy with confidence! No liability expressed or implied on installation or suitability for a particular use. Visit our Ebay stores for more great items and ProStores website at WWW.INDUSTRIALSURPLUSSTUFF.COM Pictures are typical of the units described. I DISCLAIM ANY WARRANTY OF SUITABILITY FOR A PARTICULAR PURPOSE AND/OR NON-INFRINGEMENT. IN NO EVENT SHALL I BE LIABLE FOR ANY DAMAGES EXCEPT ACTUAL DAMAGES UP TO. BUT NOT EXCEEDING, THE AMOUNT PAID TO ME FOR THE PRODUCT, INCLUDING: I SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INDIRECT DAMAGES OR LOST PROFITS WHETHER OR NOT ADVISED OF SAME. I am not a distributor of original manufacturers and I am not a party to any manufacturer’s warranty that may or may not apply. Another auction from Surplus and Used Electrical Stuff. Powered by
Sherline vinyl lathe dust cover. Gently used 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13e9e15b34b-0xf7-
Sherline 4000 lathe. This is an older Sherline lathe. Manufactured in November of 1977. It is in great condition for it's age. The bed of the lathe is made of brass and is in good shape other than a few nicks. I cleaned and adjusted the ways& the lead screws all work smoothly. The headstock bearings feel good and the rest of the lathe is in real nice shape with the black painted parts hardly scratched up at all. Includes a tailstock. A 3-jaw chuck, a tool post with a carbide tipped RH cutting bit. The lathe doesn't power up. I last used it about 3 years ago and it worked fine. I just tried to run the lathe and it won't come on. I don't know if it's the motor. Speed control, switch, or power cord. One day it worked the next time I plugged it in. It didn't. It could be a simple fix, I just don't know. I'm ... morenot very good at electricals, so I didn't even try to troubleshoot the problem. The lathe is mounted onto a piece of 3/4" Oak.
Ebay Base This auction is for a mini block lathe tool bit holder for 3/16" smaller square shank bits. The block measures 3/4" x 3/4" x 1-1/16" tall with a 5/16" diameter through hole. This comes with 5 cobalt alloy bits and Allen wrench. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Our pictures show Only exactly what is up for auction. No trick photography! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
Ebay Base This auction is for 8 cobalt alloy end mills in 1/2" shank. These high quality 2 flute mills are made by Acculead. Hanita, Hertel and others. Most are sharp and ready to use. The cutting diameter is 1/2" to 5/8" Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
This item is part#5411-CNC and part# 3053 for the Sherline 5411 metric mill. It includes the stepper motors and the 6700 CNC upgrade kit. This is nearly a complete working mill minus the motor and the speed control. Both of which can be purchased from Sherline as part# 3306 for $320.00 or from ebay sellers. The#5411 and#3056 parts make up over 2/3rds of the parts needed for a mill and you can get it for less than 33% of the price of a new mill($1250.00) I previously sold the complete unit on ebay but it was destroyed by UPS in shipping to Florida and then returned to me. I am selling this as used but working condition.
This auction is for a lot of 18 mini lathe cutter bits in 5/16" shank. Makers: Rex aaa. Rex 95, Mo-Max, few are not marked Many bits have custom cutting profiles ground into them Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show auction items from different angles and next to a ruler to indicate size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
Up for bid is a Sherline# 1000 replacement motor assembly in great runn ing condition. 10.00 flat shipping to the lower 48 states.
Sherline long bed CNC lathe with gang tool setup. Here is what you get: Long bed CNC Sherline 4400 lathe. OTS tool steel gang tools.2 normal holders and a 3-position WW collet holding block. Includes WW collet nuts. 2 dual shaft high torque bipolar stepper motors. Zero-resettable handwheels for X and Z axes. Sherline 2.5 inch 3-jaw chuck Tommy bars for chuck Faceplate Drive dog Tailstock with brass gib Anti-backlash kit on the Z-axis Cross slide brass nut was just replaced. Headstock and DC motor. E-stop button to mount in a place of your choosing. 3 axis CNC bipolar stepper driver in enclosure. DB25 cable. Straight-through design ready to connect to your PC via Mach3 or LinuxCNC software. Mach3 config file. Pinout document, and manual for the driver settings. Power supply for the stepper driver. Mounting board(a few extra drill holes in ... moreit) Tested and fully functional. The gang tool setup is really a nice feature. It allows you to run several operations without having to stop the motor or manually remount a tool between cutting operations. Here is a video by the guy who made the gang tool holders so you can see what you can do with them: 7 day return period after receipt. Less shipping both ways; must be in same condition. Moving soon and have to get rid of a lot of my machine stuff so take a look at my other auctions. Happy to answer any questions.
Up for sale is a Sherline mill headstock spacer model 1297. l. It has possibly been used. But I am not sure so it is being sold as used.Please view photos of actual items carefully, as this is a part of the item's description and condition. Payment to be made by PayPal. All payments MUST be received within 2 days of auction close, or I reserve the right to sell to the next lower bidder or to put it up for auction again. SHIPPING WILL ONLY BE ONLY WITHIN THE USA by USPS Parcel Post.Thank you for looking and good luck. E-mail me with any questions you might have about this item.
This is the body of a Model 4400 Sherline Lathe. I bought it because I wanted the attachments for my lathe. It is in very nice shape and runs smoothly. It comes with no accessories. Only what is pictured. I will remove the top slide and motor to make a smaller shipping package for cost. Thank you for looking.
This auction is for a lot of 12 mini end mills in 3/16" shank. These are double sided end mills in 2 and 4 flutes most of these bits are not marked Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show items from different angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
This auction is for a lot of 10 HSS& Cobalt Single ended end mills with 2& 4-flutes and 3/8" shank Various makers including Morse. Cleveland, B&S, and others Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures show the same items from different angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
T his auction is for a lot of 16 mini lathe cutter bits in 3/8" shank. Vasco Supreme. Circle C, Allegheny Ludlum, and others Some bits have custom cutting profiles ground into them Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show items from different sides and angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
Up for bid is a Sherline mini lathe bed assembly. Looks to be mostly brass. Great shape just need s the base to be painted. Get while it's available. Free shipping to the lower 48 states.
Here is my sherline 5000 mill with Cnc stepper motors. Controller, and Az Cnc extended x and y slides. Ready to go with software. Mill works without Cnc with dials. Comes with accessories as shown in pictures. Due to the nature of this hobby. No returns. Check out the pictures. Email me with questions. Thanks for looking. Good luck bidding. As always. No reserve. Posted with
This mill is used condition. I bought two mills to carve waxes for jewelry casting and have never used this one so I am selling this one. This table top mill is similar to the Sherline mills but includes the controller as part of the mill rather than being a seperate part. Included in price is software. Manuals, extra stepper motor for 4th axis and parrallel cable to hook up to your pc. MAXNC CNC MACHINE max NC Open loop with 16"X slide DESKTOP MILLING. LOW COST, RELIABLE, UNIVERSAL STANDARD G& M CODES, SIMPLE MACHINING TO COMPLEX 3D CONFIGURATIONS Bringing the power of modern CNC machining to machinists. Model engineers, hobbyist, inventors, and students. Features Proprietary Closed-Loop System(CL option) provides durable accuracy and repeatability. Unique system with encoders on all axis to monitor axis position. The control reads ... morethe encoders at over 60.000 times a second and the feedback is analyzed by the software. Based on the position of the encoders, the outputs to the motors are advanced, reduced, or modified as needed. Spindle ON/OFF and speed control from the software Anti-backlash system provides zero backlash on all axis Light weight but durable frame and stages made from 6061-T^ aircraft aluminum. Hard anodizing provides exceptional wear resistance. Proven slide dovetail construction with adjustable gibbs for long lasting accuracy Spindle supplied with ER-16 collets. It can accept optional drill chuck or tool holders. Collet range 1/16" to 3/8" Spindle motor available in 1/10 hp or 1/5 hp power output. Home/ Limit switch combination for the positive side of the X. Y, and Z axis(CL only) Socket for optional accessories: 3D digitizer Too Setter Socket for the optional MaxCool coolant pump or 4th Axis capable with the purchase of the optional rotary table. Plug and Play. G” M” code programming 0.00025” resolution Linear interpolation Circular interpolation Helical interpolation Backlash compensation Keyboard jog mode Automatic cycle Step cycle Tool length compensation table Scaling I
This is a Sherline 4000 model lathe. In good condition. This lathe retails at about $700. Parts and accessories still available at Sherline. It can also be converted to a milling machine. Has variable speed, 3 jaw chuck and tool post. AS IS NO RETURNS SHIP TO LOWER 48 ONLY
This is a complete Sherline 4000 metal lathe. It has inch dials and some accessories. It doesn't appear to have been used much since there's no marks on the table from the tool post. The drill chuck wasn't even opened yet. Has some light surface rust and stains on some of the bare metal surfaces but still looks good. The variable speed motor works well and runs smooth. Everything turns freely and has no wear or signs of use. The only thing it will need is some square tool bits. Very nice quality. Made in the USA. Shipping will be based on zip code sent Parcel Select mail in the US only. Thanks for looking.
SHERLINE MODEL 4000 MINI LATHE WITH MANY ACCESSORIES AND TRAVEL BENCH MOTOR. THE TRAVEL BENCH MOTOR MOVES THE CUTTING BIT WHEN ENGAGED OR YOU CAN MANUALLY MOVE THE BIT. LATHE RUNS GREAT! PLEASE LOOK AT THE PICTURES TO SEE WHICH ACCESSORIES COME WITH THE LATHE. UNFORTUNATELY THERE IS NO MANUAL. FOR SHIPPING PURPOSES. THE MOTORS WILL BE UNBOLTED FROM THE UNIT AND WRAPPED SECURELY BEFORE PLACING THEM IN THE SHIPPING BOX. DnL Collectibles Terms and Conditions Payment: We accept PayPal. Customers must pay within 48 hours of winning the item. If we do not hear from you within this time period and no payment is received. We will have no choice but to file this with eBay as an unpaid item, which will cause a strike to be issued against your eBay account. Shipping: The cost of shipping is listed for each item. If you have purchased more than one item. ... moreContact the seller for the new cost of shipping. We do offer combined shipping discounts whenever possible. We ship to the lower 48 states only. If you request it. We can add insurance to your package; contact seller for additional cost of this service. We make every effort to ship all purchases within 2 business days from receipt of payment. Local pick-ups are not available. Returns: All sales are final. No returns are accepted because items are used and we have described each item’s condition to the best of our ability. Of course. One person might see a flaw as minor while another believes it is a major problem. Please look at pictures closely and e-mail us with any questions you may have. At this time we are also not accepting returns on our new items. Again, please look at the pictures closely and e-mail us with any questions you may have. Thanks for looking at our items! Feedback: We leave positive feedback as soon as payment is received. Please leave us positive feedback as soon as you receive your item. If. By any chance, you are not satisfied, please contact us before you leave negative feedback. Restrictions: DnL Collectibles restricts knife purchases to thos
Ebay Base This auction is for 20 Cobalt alloy HSS mini lathe bits in 1/4" shank. These quality bits are Mo-Max Cobalt by Cleveland Twist Drill. Rex 95. RexAAA by Crucible and other Brands. One bit is a new/unused blank, the rest are sharp and ready to use. One or two might need dressing before use. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each picture shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
Ebay Base This auction is for 24 cobalt alloy mini lathe cutter bits in 5/16" shank. These High quality bits are Rex 95. RexAA& RexAAA made by Crucible. Mo-Max made by Cleveland twist drill. Circle C by Firth Sterling, Comokut by Bethlehem Steel and other brands. All the bits have custom cutting profiles ground into them. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
T his auction is for a lot of 21 mini lathe cutter bits in 3/8" shank. Vasco Supreme. Circle C, Rex aaa, and others Some bits have custom cutting profiles ground into them. About half are of short lengths Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show items from different sides and angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
This auction is for a lot of 10 used heavy duty Brazed carbide mini lathe cutter bits in 3/8" shank made by Kennametal. Carboloy, Armstrong, and others Some bits have custom cutting profiles ground into them and four bits are shortened Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show same items from different angles and next to a ruler to show size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment. 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13eee986372-0xf3-
Up for auction is a Sherline Sherline Clockmaker's Gear Cutting Arbor; Sherline P/N 2096. The arbor is primarily designed to be used on watchmaker's lathes that accept 8.0 mm collets. I don't believe this part has ever been used. But I am selling it as" used. The present Sherline price is $60. Please view photo of actual item carefully, as this is a part of the item's description and condition. Payment to be made by PayPal. All payments MUST be received within 2 days of auction close, or I reserve the right to sell to the next lower bidder or to put it up for auction again. SHIPPING WILL ONLY BE ONLY WITHIN THE USA by USPS Priority Mail for a $5.15 flat rate. Thank you for looking and good luck. E-mail me with any questions you might have about this auction. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13ef2e549b3-0xfd-
This listing is for a 1/2" drill chuck with a#1MT. It is made in China. It spins freely and comes with key. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13ef2e549c8-0xf5-
This is a used Sherline 5000 mill. The table. Ways, and leadscrews are all in good condition. There is a 1/2" endmill holder and drawbar inclused, I think they may ne home-made. The spindle runs smooth at higher RPM's, but the motor gets a little jumpy at slow speed. This may be normal, I'm not sure. Becasue of that, I'm selling it AS-IS with no return. Please e-mail me with any questions.
Selling this Sherline CNC milling system complete with motors and driver plus laptop(Panasonic toughbook with windows xp license) with CAM software and other extras which include a boring head. Draw bar with collet, jacobs chuck with key, fixing bolts and pieces to hold the parts on the milling table. Also there's some leaflets and schematics of the drivers and mill. I've powered it and hooked it to the laptop and all the motors work. Computer sends signal to them to move left right, up down, front back, but i think the mill might need cleaning/parts(leadscrews) as they sometimes get jammed and stop going forward. You get what you see in the pictures. Paypal only. Ask for shipping costs before bidding. Here's a more complete description of what I am selling: This is an auction for a DIY modified Sherline Mill Model 5000 with CNC ... morecontrol. It comes with a Panasonic CF-72 Toughbook Laptop. X3 Microstepper Motor Drivers and a Switch Mode Power Supply. All data leads and power connection cables are included. Basically all you require to run this mill as a CNC milling machine. The Sherline Mill Model 5000 has a variable speed motor.The 5000-series mills feature a solid 10" 254mm) aluminum base. Precision machined dovetailed slides with adjustable gibs, permanently lubricated spindle bearings, adjustable preload anti-backlash feed screws on the X- and Y-axes. The x3 RMB3DB Microstepping Motor Drivers have the following spec: High performance Supply voltage up to +32VDC. Peak current up to 2.5A 3-state current control technology Automatic idle-current reduction Suitable for 2-phase and 4-phase stepping motors Optically isolated input signals Pulse frequency up to 100 KHz 4 Selectable resolutions DIP switch current setting and micro-stepping settings. See tables below PUL/DIR mode and CW/CCW mode. Small size(86x55x20.5mm) A DB-25 CNC Breakout Board A 6.5amp 24v DC Switch Mode Power Supply A Panasonic CF-72 Toughbook Laptop with Windows XP and Mach3 demo installed also has a CD drive. On the main control b
8-1/2 x 11" 40 pages Complete. Uncut, shows some used. In good condition. Powered by The free listing tool. List your items fast and easy and manage your active items.
YOUR ARE BIDDING ON A MINI-CNC MILLING MACHINE THAT WAREHOUSE HOBBIES INC. PURCHASED FOR TRAINING We have recently replaced this unit with a little larger one and we have no use for this machine. I believe it is a 2003 model with very little use. Much of what cut air in training, for our potential operators whom used it for learning before running our large machines. This is a very accurate machine and I believe intended for fine hobby parts as I have seen many whom have made finely detailed parts and working model engines with this model. We have only used it to cut plastic and the picture shows one of our training products shown small I.D. plates for one of our products. This plate will be removed before shipping( we will keep it for our use) and we will include the Sherline vise. Also shown. We will also include the PC Computer with the ... morebuilt-in driver board. It is running on LINXUS and there is a copy of operating software on it as well. The driver board is a 4 axis and there is a spare cable included if you were to purchase a 4th axis chuck. The condition is almost new and it is a well taken care of machine kept in an AC controlled room. We will include any paperwork we may have. THERE IS NO FREE SHIPPING PLEASE READ BELOW SHIPPING( LOWER US STATES ONLY) Let's talk about shipping and we are experts at it. This will not be cheap to ship and we will not ship or package it cheaply. So if you are looking for cheap you have come to the wrong place. There will be a- $75.00 additional shipping charge over top of the actual shipping charges and shipped only by UPS insured for value. This means that depending on where this machine is shipped to can cost in the neighborhood of- $125.00- 175.00 added to the selling price for shipping. The $75.00 will cover the cost of special packaging and the labor to do so. I am sorry but we intend to get this machine to you in the condition it is in right now. You may come to our factory and pick it up, and of course there would be no shipping charges if that were the case.
Clearing out a number of items from my studio.
See Pic Beauties Clamps have.158 slots This is really nice stuff in perfect conditon ````````````````````````````````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their ... moreown greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine i
This auction is for 3 nema 23 stepper motors. I do not know the holding torque rating of these motors or much about them except they are manufactured by Rapidsyn Division of American Precision Industries. The motors are made in the USA. Quality built steppers. You will receive three of these as seen in the photo. I am leaving the gear and optical sensors on these motors just in case you have a use for them. Thanks for looking!
This is a Sherline CNC Longbed Mill with 3rd party motor. X axis and Y axis have steppers mounted and Z has a stepper mount but stepper has been removed. Buyer pays shipping. Thanks for looking. Posted with
Wonderful lightly used Shurline mini bench top lathe for the serious hobby enthusiast. Jewelry maker, or gun smith. This piece is in excellent condition and saw very little use. The motor and speed control work great and runs smoothly. The two rods for tightening the chuck are included as is the tool rest that is installed. Ask questions before you bid! Buyer responsible for shipping costs. If actual shipping is less than estimate a refund will be issued. Thanks! Posted with
Barely. If at all, used Serline 5400 CNC vertical mill, inside of a Lab Volt enclosure. Was used in school setting. More info on product can be found here: Enclosure features: Key-released emergency stop push-button, Single and continuous step modes, Full manual control mode, Tool offset table editing, Main power indicator, Feed rate override, Spindle speed override, Stall indicator, Selling as-is. Missing: cables. Key for emergency stop push-button, software. Shipping could be expensive. Depending on where. Shipping is not free, buyer will pay for shipping. Item weighs 100+ lbs. Seller located in south Jersey, and local pickup is acceptable. Please email for more info.
Ebay Base This auction is for a lot of 14 carbide lathe cutter bits in 3/8" shank. These high quality bits are made by Carboloy. Sandvik, Hardinge, Kennametal and Super-Morse. Some are sharp and ready to use. some need dressing before use. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping
This auction is for a lot of 14 mini lathe cutter bits in 3/16" shank. Makers: Circle C. DoAll, Seco Sweden, Poldi Czechoslovakia, some are not marked Few bits have custom cutting profiles ground into them and four bits are of short lengths Please look at the pictures carefully before you bid. The pictures show exactly what is up for auction Pictures below show auction items from different angles and next to a ruler to indicate size I do combine shipping to save you money. If you win two or more auctions. Please request totals before making a payment.
4 Jaw Chuck for Sherline Lathes We're selling a 4 jaw self-entering chuck for Sherline lathes because we no longer need it. It's been used. But it's in very good condition. Comes with all necessary accessories. Thanks for looking and let us know if you have any questions! This larger chuck takes up no more center-to-center space than the 2.5" chuck. But it will hold larger work. It has a clamping range of from 3/32" 2 mm) up to 1-1/2" 38 mm) diameter with the jaws in the normal position. With the jaws in the reversed position, work up to 2-3/4" 70 mm) can be gripped. The hole through the chuck is.687" 17 mm) A hex key(provided) is used to tighten each jaw individually. A groove is machined around the base of the chuck so that angle clamps can be used to mount it to the table of a mill as a holding fixture. ... moreThe chuck has a 3/4-16 thread to fit Sherline's spindle and other machines using that thread.
Description: Emco. Sherline or Unimat End Mill Set Works best with set screw type end 3/8" mill holder. 3/8" Shank. 2 flute square end mills. 1/8" 1/4" 3/8" 1/2" HSS. Set screw on end mill flat hold cutting tool securely Condition: Excellent condition; may be unused. Shipping: Charges will be a flat rate shipped anywhere in the US; No where else. I ship from Ann Arbor. Michigan 48103. That's all I can tell you. I'm not an engineer. Returns: Policy Updated 2012 I offer a 30 day money back refund(excluding shipping) for Any Reason but you must return the undamaged item to me at your expense! In the event. I made a mistake in the listing. I offer a full money back refund(with shipping both ways) but you must return the undamaged item to me. I do not offer partial refunds and or replacements; I only offer ... moremy refund policy as stated above. In the event of loss or damage in shipping(that is out of my control) You agree in advance to cooperate so I can file an insurance claim for the loss or damage and issue a refund to you. If you win this auction. You will be expected to execute a paypal transfer OR send a check to me within 24 hours. DISCLAIMER You may think you see more than what is written herein; all invisible items. Like smiley faces and brightly colored objects are excluded from this auction; if you can see these things, you may have a serious retinopathy which may require emergency brain surgery and refrigeration; DO NOT DELAY; Contact your Physician immediately!
See Pic Dual End 90 Degree + 45 Degree For 1/8" Bore Bars Cheap Shipping Never Actually Used ``````````````````````````````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping ... morecost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and comb
Additional Images maybe found at this link Photobucket/ Item: 3" 4 Jaw Chuck Reversible Independently adjusted Jaws. Fit Sherline Lathes Item: 4 Jaw Lathe Chuck Size: 3 inches x 4 Independently adjusted. Reversible jaws Mount: Through Hole.687" 17mm) diameter 3/4"16 thread. Fit: Sherline Lathes or any other with 3/4" 16tpi Spindle or adapter. Condition: No Hex Key. Some surface abrasions and discoloration consistent with use. Please read carefully. Especially the section on Payment and Shipping. Sale is final! You will receive. 4 Jaw Lathe Chuck, as described above. You are purchasing the item with this understanding*Sold with: As Is. Miscellaneous You have every right to ask questions about this product. Please take the opportunity to do so. Please do not make a purchase until you have satisfied yourself that this product ... morewill suit your needs. Payment: PayPal. Shipping Weight of this item: 4lbs You can calculate your shipping rates here(use Zip 27262 as the origin) Or: See Listing for Shipping Costs Combined shipping: is available for some items eBay does not allow Listings that do not include Insurance. Insurance is therefore included as handling charge UNITED STATES POSTAL SERVICE INSURANCE FEE RATES Fee. Insurance Coverage $1.85. $0.01 to $50 $2.05. $50.01 to $100 $2.45. $100.01 to $200 $4.60. $200.01 to $300 $5.50. $300.01 to $400/ Below is a selection of rates to International Destinations using Priority Mailing up 45lbs for rates greater than that use this link to confirm other shipping rates: Afghanistan- Belgium 1lb $23.00. 2lbs 27.25, 3lbs 31.50, 4lbs 35.75 Belize- Cape Verde 1lb $19.50. 2lbs 23.25, 3lbs 27.00, 4lbs 30.75 Cayman Islands- Ecuador 1lb $21.00. 2lbs 25.00, 3lbs 29.00, 4lbs 33.00 Egypt- Ghana 1lb $21.00. 2lbs 25.00, 3lbs 29.00, 4lbs 33.00 Gibraltar- Ireland 1lb $24.00. 2lbs 27.00, 3lbs 30.50, 4lbs 34.00 Israel- Lithuania 1lb $21.00. 2lbs 25.00, 3lbs 29.00, 4
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. Seems to be in good used condition. PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH ... moreYOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID. BT
Very Scarce Original Sears Craftsman 109 Wood Spur& Cup Size: 0 MT. Powered by The free listing tool. List your items fast and easy and manage your active items.
You are looking at an Edelstaal Cutting Tool Set. This set is in good. Used condition. Includes left and right tool holders(1/4" shank) cut off tool holder(5/16" shank) boring bar(90/45 degrees, 1/4" diameter and approx. 6" long) A few blades are also included. Everything in the photos is included. Box is in good condition. The foam is not original. I made 9 photos(click on the photos to enlarge) Please view the photos below carefully. To see the condition of what is being sold. PLEASE CHECK OUT MY OTHER AUCTIONS. WHERE I AM SELLING OTHER MACHINIST STUFF: My other items Please scroll down to bottom of the listing. There might be answers to questions I get asked about this item. Combined shipping is available; every next item you buy is half price shipping. If shipping all together will be even cheaper. Then I will return ... morethe difference to your account. Buyer will pay the reasonable price. Local pick up is also available. Thank you for looking. ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13f40f3f4bf-0xf4-
You are looking at an Edelstaal Boring Bar 90 Degrees/45 Degrees for Emco Unimat Sherline Craftsman Atlas Metal Lathe. The shank diameter is 1/4" The length is approx. 6" Includes one wrench and three cutting blades. This boring bar is in good. Used conditon. I made 4 photos(click on the photos to enlarge) Please view the photos below carefully. To see the condition of what is being sold. PLEASE CHECK OUT MY OTHER AUCTIONS. WHERE I AM SELLING OTHER MACHINIST STUFF: My other items Please scroll down to bottom of the listing. There might be answers to questions I get asked about this item. Combined shipping is available; every next item you buy is half price shipping. If shipping all together will be even cheaper. Then I will return the difference to your account. Buyer will pay the reasonable price. Local pick up is also available. ... moreThank you for looking.
COMPANION LATHE CHUCK 1/2 X 20 THREAD- SEARS CRAFTSMAN 109 ATLAS TAIG SHERLINE Powered by The free listing tool. List your items fast and easy and manage your active items.