In 
 
Order by: 
Available to: 
Price: 
 - 
$
109.99
Buy It Now
Free Shipping
Condition: New
Location: Fort Mill, United States
This Wilton Super-Junior C-Clamp is constructed of forged steel with a heat-treated frame for superior strength and durability. The extra compact design ... moreis super tough and ideal for use in light-duty clamping, pattern and mold making, the aircraft/aerospace industry, and more. Adjustable opening from 0 to 1in. maximum capacity. 1 1/2in. throat depth. 1/4in. spindle dia. Limited lifetime warranty. Clamp Pressure lbs. 500, Dimensions L x W x H in. 4.5 x 3.9 x 3.3, Finish Zinc-plated, Material Steel, Pieces qty. 12, Series 50, Throat Depth in. 1 1/2, Tool Length in. 2. Steel screws are zinc plated for longer life Forged steel with heat-treated frame for superior strength and toughness Compact size designed to handle big jobs 0in. to 1in. maximum opening Zinc-plated steel 1/4in. spindle.
$
305.97
Buy It Now
Free Shipping
Condition: New
Location: United States
This is a New Westward Electronic Depth Micrometer model 4KY22 this item is new never used comes with 3 gauges# 5-6" 4-5" and 2-3" the ... moreothers are missing. See pictures. On Mar-07-13 at 11:16:58 PST. Seller added the following information:
$
72.99
Buy It Now
Free Shipping
Condition: New
Location: Fort Mill, United States
This Wilton Classic Series Light Duty F-Clamp features a dependable, no-frills design that gets the job done. Versatile design for use in a variety of ... moreprojects. Clamps down with 1200 lbs. of force. 8in. opening with 4 3/4in. throat depth to handle large jobs. Clamp Type F-clamp, Dimensions L x W x H in. 12 x 7 x 1 1/2, Opening in. 8, Pieces qty. 1. Black oxide spindle resists wear and tear while impeding rust Drop-forged arm provides minimal flex under heavy work loads Swivel pad centers on workpiece to provide a sturdy hold Sturdy tommy bar is engineered for durability and comfort 1200-lb. clamping force.
$
219.99
Buy It Now
Free Shipping
Condition: New
Location: Fort Mill, United States
This Wilton 100 Series Heavy-Duty Forged C-Clamp is recommended for heavy industrial and construction job site demands including machine tool fixtures, ... moremining and extraction, press work and more. Forged of superior quality steels to deliver incredible weight-to-strength ratio. Adjustable opening from 4 to 8in. maximum capacity. 2 3/4in. throat depth. 3/4in. spindle dia. Clamp Pressure lbs. 12,500, Dimensions L x W x H in. 14.6 x 6.1 x 1.6, Finish Black oxide, Material Steel, Pieces qty. 1, Series 100, Throat Depth in. 2.75, Tool Length in. 14.6. Superior quality forged steel frame Heavy-duty with 2 3/4in. throat depth 4in. to 8in. maximum opening Powder-coated paint resists scratches and corrosion while providing a tough, durable finish 3/4in. dia. full-length spindle machined from .
$
27.94
Buy It Now
Free Shipping
Condition: New
Location: Shakopee, United States
Item model number ‏ : ‎ 21305. Steel Screws Are Zinc Plated For Longer Life. Date First Available ‏ : ‎ January 1, 2006.
$
84.99
Buy It Now
Free Shipping
Condition: New
Location: Fort Mill, United States
This Wilton Classic Series Light Duty F-Clamp features a dependable, no-frills design that gets the job done. Versatile design for use in a variety of ... moreprojects. Clamps down with 1200 lbs. of force. 12in. opening with 4 3/4in. throat depth to handle large jobs. Clamp Type F-clamp, Dimensions L x W x H in. 16 x 7 x 1 1/2, Opening in. 12, Pieces qty. 1. Black oxide spindle resists wear and tear while impeding rust Drop-forged arm provides minimal flex under heavy work loads Swivel pad centers on workpiece to provide a sturdy hold Sturdy tommy bar is engineered for durability and comfort 1200-lb. clamping force.
$
150.00
Buy It Now
$9.95 Shipping
Condition: New – Open box
Location: Pataskala, United States
Spindles are full length, machined from a single piece of square, cold-drawn steel tempered and hardened. Square spindle heads stand up to heavy wrench ... moretightening. ADDED STRENGTH: Black oxide coated forged square head spindle with rolled thread.
$
55.70
Buy It Now
Free Shipping
Condition: New
Location: United States
Drop Forged, Regular Duty With Extra Deep Throat.
$
41.72
Buy It Now
Free Shipping
Condition: New
Location: Kansas City, United States
Item model number ‏ : ‎ 20481. STURDY: Drop-forged construction, regular-duty clamp with extra-deep throat. Each clamp has an oscillating head with a ... morehigh-quality steel pad built to last, and provides firm gripping action on angular surfaces.
$
151.16
Buy It Now
$74.09 Shipping
Condition: New
Location: Chino, United States
Jaw opening is 6". Jaw depth is 2". Body & slide are made of selected fine grain cast iron. Slip handle allows for easy turning and added leverage. Hardened ... moresteel V-groove jaws hold round shapes in both vertical or horizontal positions.
$
349.14
Buy It Now
Free Shipping
Condition: New
Location: Melville, United States
Wilton 10" Jaw Width, 13" Jaw Opening, 4" Throat Depth, Cast Iron Woodworking Vise 22-1/2" OAL x 11-1/2" OAW x 8" OAH, Rapid Action Spindle
$
258.31
Buy It Now
Free Shipping
Condition: New
Location: United States
& Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
$
217.10
Buy It Now
$123.34 Shipping
Condition: New
Location: Chino, United States
Jaw opening is 8". Low profile clearance provides increased working room on machine table. Body and slide are made of selected fine grain cast iron. Throat ... moredepth is 2". Four slots for a secure mount to the machine table.
$
169.99
Buy It Now
Free Shipping
Condition: New
Location: Fort Mill, United States
This 24in. Wilton Light-Duty F-Clamp has a Spark-Duty copper-plated spindle that protects against harmful welding spatter. Provides 2,400 lbs. of clamping ... moreforce. 24in. opening. Lifetime limited warranty. Clamp Type F-clamp, Dimensions L x W x H in. 30 x 8 x 2, Opening in. 24, Pieces qty. 1. Ergonomic Wilton-Grip has anti-fatigue properties that provide comfort during repetitive clamping Drop forged arm provides minimal flex under heavy workloads Spark-Duty copper-plated spindle protects the spindle from harmful welding spatter to extend clamp life Quick and simple to replace quick-twist pads with V-groove optional serrated pads are also available.
$
27.80
Buy It Now
$5.99 Shipping
Condition: New
Location: Minooka, United States
GREENFIELD THREADING 357682. Spiral Point Tap,7/16"-14,HSS. Spiral Point Tap, Thread Size 7/16 In.-14, UNC, Overall Length 3 5/32 in, High Speed Steel, ... moreTiN, Right Hand, Thread Length 1 7/16 in, 75 Percent Thread Drill Size U, Thread Limit H3, Class of Fit 2B, Number of Flutes 3.
$
109.99
Buy It Now
Free Shipping
Condition: New
Location: Fort Mill, United States
This Wilton 540A Series Carriage C-Clamp is ideal for light industrial, woodworking and repair applications. It features a black oxide coating, oscillating ... morehead and sliding cross pin handle. Adjustable opening from 0 to 12in. maximum capacity. 3 5/8in. throat depth. 7/8in. spindle dia. Limited lifetime warranty. Clamp Pressure lbs. 2,850, Dimensions L x W x H in. 19.6 x 7.2 x 1.8, Finish Black oxide, Material Ductile iron, Pieces qty. 1, Series 540A, Throat Depth in. 3 5/8, Tool Length in. 19.6. High strength ductile iron casted frame makes up Wilton's heaviest-duty carriage clamp available 3 5/8in. throat depth 0in. to 12in. maximum opening Sliding pin vise type handle 7/8in. dia. single acme thread rolled spindle Oscillating ball and socket tip Black oxide coating to resist rust .
$
87.99
Buy It Now
Free Shipping
Condition: New
Location: Fort Mill, United States
This Wilton Classic Series Light Duty F-Clamp features a dependable, no-frills design that gets the job done. Versatile design for use in a variety of ... moreprojects. Clamps down with 1200 lbs. of force. 18in. opening with 4 3/4in. throat depth to handle large jobs. Clamp Type F-clamp, Dimensions L x W x H in. 24 x 7 x 1 1/2, Opening in. 18, Pieces qty. 1. Black oxide spindle resists wear and tear while impeding rust Drop-forged arm provides minimal flex under heavy work loads Swivel pad centers on workpiece to provide a sturdy hold Sturdy tommy bar is engineered for durability and comfort 1200-lb. clamping force.
$
101.15
Buy It Now
$29.00 Shipping
Condition: New
Location: United States
$
99.99
Buy It Now
Free Shipping
Condition: New
Location: Fort Mill, United States
This Wilton Classic Series Light Duty F-Clamp features a dependable, no-frills design that gets the job done. Versatile design for use in a variety of ... moreprojects. Clamps down with 1200 lbs. of force. 24in. opening with 4 3/4in. throat depth to handle large jobs. Clamp Type F-clamp, Dimensions L x W x H in. 28 x 7 x 1 1/2, Opening in. 24, Pieces qty. 1. Black oxide spindle resists wear and tear while impeding rust Drop-forged arm provides minimal flex under heavy work loads Swivel pad centers on workpiece to provide a sturdy hold Sturdy tommy bar is engineered for durability and comfort 1200-lb. clamping force.
$
150.00
Buy It Now
$9.95 Shipping
Condition: New – Open box
Location: Pataskala, United States
Spindles are full length, machined from a single piece of square, cold-drawn steel tempered and hardened. Square spindle heads stand up to heavy wrench ... moretightening. ADDED STRENGTH: Black oxide coated forged square head spindle with rolled thread.
$
8.41
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
NEW IN BOX ONE MORSE HOLE SAW AT44 HOLE SAW Is Carbide Tipped 2-3/4" 70mm) DIA Grainger Part# 1XJF8
$
362.09
Buy It Now
Free Shipping
Condition: New
Location: United States
Cross Slide Drill Press Vise - 5 in. Jaw Width, 5 in. Jaw Opening, 1-1/2 in. Jaw Width (In.). Jaw Depth (In.). All boast hardened v-grooved jaws for clamping ... moreround objects vertically and horizontally.
$
950.00
Buy It Now
$143.19 Shipping
Condition: New – Open box
Location: Holland, United States
This is a D80-4-SA Kurt Swivel Base for their D80 and D810 8" vises. Included are two pieces of the T-Bolt, nut and washer to mount your vise. WE SPECIALIZE ... moreIN CUTTING TOOLS!
$
10.31
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
EATON WEATHERHEAD. Range -40 to 200 F, Material Brass, Gasket Material Ethylene Propylene Rubber, For Use With Push Connect/Air Brake, Standards DOT FMVSS ... more571.106 and SAE J1178. Linemaster 522-D28 Foot Switch Guard,Steel,Alert Orange.
$
18.95
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
An improved continuous brazed edge provides clean, superior joint strength, and better diamond retention when cutting hard, abrasive materials. The One-Piece ... moreHole Saw has a 1/4" quick-change hex shank and features a large slug ejection slot.
$
50.00
Buy It Now
$41.72 Shipping
Condition: New
Location: Holland, United States
The serrations are 1.5mm x 60º. WE SPECIALIZE IN CUTTING TOOLS!
$
7.61
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
3M CUBITRON II. Sanding Belt, Width 2 in, Length 72 in, Abrasive Type Coated, Abrasive Material Ceramic, Grit 120, Grade Fine, Series 947A, Color Orange, ... moreBacking Weight X, Backing Material Polyester/Cotton.
$
86.72
Buy It Now
Free Shipping
Condition: New
Location: United States
ZORO SELECT. Wiegmann Np2424 Enclosure Inner Panel. Linemaster 522-D28 Foot Switch Guard,Steel,Alert Orange. General Purpose. & Recepticles. Electrical ... moreOutlets. Light Industrial. and Enclosures.
$
20.49
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
BALDWIN FILTERS. Linemaster 522-D28 Foot Switch Guard,Steel,Alert Orange. Wiegmann Np2424 Enclosure Inner Panel. Light Industrial. & Recepticles. Electrical ... moreOutlets. and Enclosures. Electrical Boxes.
$
26.70
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
No. 802, 807, 808, 817. Linemaster 522-D28 Foot Switch Guard,Steel,Alert Orange. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. ... moreElectrical Boxes. General Purpose.
$
83.33
Buy It Now
Free Shipping
Condition: New
Location: United States
Welding Apron, Material Leather, Length 32 in, ANSI/ISEA Cut Level Not Tested, ANSI/ISEA Abrasion Level Not Tested. Linemaster 522-D28 Foot Switch Guard,Steel,Alert ... moreOrange. & Recepticles. Electrical Outlets.
$
47.91
Buy It Now
$30.01 Shipping
Condition: New
Location: Chino, United States
Jaw opening is 4". Jaw depth is 1.5". Body & slide are made of selected fine grain cast iron. Slip handle allows for easy turning and added leverage. ... moreHardened steel V-groove jaws hold round shapes in both vertical or horizontal positions.
$
19.27
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Linemaster 522-D28 Foot Switch Guard,Steel,Alert Orange. Wiegmann Np2424 Enclosure Inner Panel. & Recepticles. Electrical Outlets. Light Industrial. and ... moreEnclosures. Electrical Boxes. General Purpose.
$
128.21
Buy It Now
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
COMFORTABLE GRIP: Wilton Blue aluminum handle is ergonomically designed and resistant to heat. CONVENIENT CLAMPING: Quick-Trigger release frees clamp ... morepressure with one squeeze. The order will be processed and completed by automatic warehouse system within 5 minutes.
$
11.89
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Polaris Ipld250-6B Insulated Multitap Connector,5.52 In. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General ... morePurpose. & Industrial.
$
156.16
Buy It Now
Free Shipping
Condition: New
Location: United States
& Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
$
120.25
Buy It Now
Free Shipping
Condition: New
Location: United States
Linemaster 522-D28 Foot Switch Guard,Steel,Alert Orange. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General ... morePurpose. & Industrial.
$
8.97
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Adjustable Handle, External Threads, Teardrop, Orange, Thermoplastic, Thread Size 1/4 In.-20, Screw Length 20.00mm, Components Material Steel, Thread ... moreStandard UNC, Overall Height 24.50mm, Overall Length 1.8500 in, Features Comfortable Grip.
$
71.99
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
ZORO SELECT. Wiegmann Np2424 Enclosure Inner Panel. Linemaster 522-D28 Foot Switch Guard,Steel,Alert Orange. General Purpose. & Recepticles. Electrical ... moreOutlets. Light Industrial. and Enclosures.
$
32.62
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Standard Keyseat Cutter, High Speed Steel, Straight, 3/4 in Cutter Dia., Left Hand. Wilton 1755 Combination Vise,Swivel,Heavy Duty. High Speed Steel. ... moreLinemaster 522-D28 Foot Switch Guard,Steel,Alert Orange.
$
3.73
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Jobber Length Drill Bit, Drill Bit Size #8, Drill Bit Point Angle 118 Degrees, Vanadium High Speed Steel, Bright (Uncoated), Decimal Equivalent 0.1990, ... moreWire, Drill Bit Point Type Conventional Point, Non-Coolant Through.
$
9.12
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Store Categories. Click to close full size. MORSE AV30 Hole Saw. Bi-Metal, Saw Dia 1-7/8 In. MORSE. Item Specifics. Item. Hole Saw. Type. Cut Holes in ... moreWood. Plastic, Nail-embedded Wood, Plywood, Pipe, Stainless Steel, Machinable Metal. Type. Cut Holes in Wood. Plastic, Nail-embedded Wood, Plywood, Pipe, Stainless Steel, Machinable Metal. Pilot Drill. Included With Arbor. Use Arbor. G0490472. G1158762. Teeth. Variable Pitch. Construction. Bi-Metal. Saw Dia. 1-7/8" Arbor Hole. 5/8-18. Drill Size. 1/4" Dia x 3-1/16" L. Application. Cut Holes in Wood. Plastic, Nail-embedded Wood, Plywood, Pipe, Stainless Steel, Machinable Metal. Item. Hole Saw. Teeth per Inch. 4/6. Max. Cutting Depth. 1-1/2" Thread Size. 5/8-18. Package Quantity. 1. Shipping A $5 shipping and handling fee is charged on orders totaling less that $50 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $50 or more before tax. Shipping Policy Exceptions: Not all products qualify for the above Shipping Policy. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Returns Once your order is placed you will not be able to cancel the order. Once you receive the item. Please contact the Zoro Tools customer service team to obtain a return authorization(RA) number and a free shipping label. If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a return authorization(RA) number that can be obtained by contacting our Customer Service Department at 855-BUY-ZORO(855-289-9676) Our customer service hours are Monday through Friday from 7:00 a.m. to 7:00 p.m. CST) About Us We understand the need for small b
$
6.19
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Linemaster 522-D28 Foot Switch Guard,Steel,Alert Orange. Dolphin Components Corp Dc-2710 Coaxial Connector,Bnc,0-4Ghz,75 Ohm,Pk10. & Recepticles. Electrical ... moreOutlets. Light Industrial. and Enclosures. Electrical Boxes.
$
35.16
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Standard Keyseat Cutter, Cobalt, Straight, 5/8 in Cutter Dia., Right Hand. Cobalt Steel. Wilton 1755 Combination Vise,Swivel,Heavy Duty. Linemaster 522-D28 ... moreFoot Switch Guard,Steel,Alert Orange. Light Industrial.
$
18.49
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
NEW M. K. Morse DG20C Diamond Grit Hole Saw 1-1/4-Inch- Brand NEW items- FREE standard shipping- Easy returns Our price $40.30 NOW ONLY Two-day shipping ... moreonly $5.95 Overnight shipping only $15.95 M. K. Morse Diamond Grit Hole Saws are the ones Home Owners and Contractors want to make their lives easier. These hole saws provide longer life and faster cutting in hard to cut materials than conventional carbide grit or carbide tipped hole saws. They are great for cutting natural stone. Porcelain, or masonry products, just to name a few. Long lasting- Fast cutting- Gulleted edges- Smooth clean cuts- Easy plug removal We currently accept Paypal only. Immediate payment required. We offer free Standard shipping within the continental U.S. We ship to addresses in the U.S. and to worldwide. Not including APO/FPO Alaska, Hawaii and US Protectorates addresses. We cannot accept P.O. Boxes. Please provide a physical address and check that it's the right address before purchasing. We usually ship our items in 1-2 business days from receiving the payment. Standard free shipping: takes between 3- 5 business days. Expedited shipping: takes between 2- 4 business days. Overnight shipping: takes between- 1- 3 business days(Ships in 13 hours) We use a selection of shipping services as USPS. Laseship, FedEx Etc. We always pack our items carefully to prevent any damage during the delivery and protect your purchase as much as possible. When your order is shipped. We will email you the tracking information including a tracking number and the delivery estimated date, to help know when to expect your order. We accept returns within 14 days from the date of receiving the item. If you want to return an item. Please don't hesitate to contact us, we will guide you and give you the instructions. When we get the item back, we will grant you a full refund or replacement- whatever you requested. As veteran sellers we are committed to your satisfaction. We are here to provide you the best prices. The most quality items and the most h
$
160.23
Buy It Now
Free Shipping
Condition: New
Location: Demotte, United States
The top of the line Wilton Spark-Duty Series with copper Spindle is superior when resisting welding spatter. Spark-Duty copper-plated spindle extends ... morethe life of the Clamp by protecting the spindle and pad from harmful welding spatter.
$
330.99
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
I have a very nice looking and working vintage woodworkers bench vise By Craftsman. The 10" jaws open 12" quickly by turning the handle ccw ... more1/2 turn and pulling the handle. If you are building a wood work bench it deserves a new vise. This one would make a fine choice Powered by The free listing tool. List your items fast and easy and manage your active items. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-146af812e27-0x10e-
$
4.72
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Linemaster 522-D28 Foot Switch Guard,Steel,Alert Orange. Light Industrial. & Recepticles. Electrical Outlets. and Enclosures. Electrical Boxes. General ... morePurpose. & Industrial.
$
185.20
Buy It Now
Free Shipping
Condition: New
Location: United States
Linemaster 522-D28 Foot Switch Guard,Steel,Alert Orange. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General ... morePurpose. & Industrial.
$
11.21
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Exhaust Rain Cap, Min. Exhaust O.D. 1 in, Max. Exhaust O.D. 1 3/16 in, Color Gray, For Use On Vertical Exhaust Stacks. Linemaster 522-D28 Foot Switch ... moreGuard,Steel,Alert Orange. & Recepticles. Electrical Outlets.
$
41.87
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Linemaster 522-D28 Foot Switch Guard,Steel,Alert Orange. Wiegmann Np2424 Enclosure Inner Panel. Light Industrial. & Recepticles. Electrical Outlets. and ... moreEnclosures. Electrical Boxes. General Purpose.
$
3.59
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Hex Shank Drill Bit, 3/16 in, Drill Bit Point Angle 135 Degrees, Drill Bit Point Type Split Point, High Speed Steel, Black Oxide. Linemaster 522-D28 Foot ... moreSwitch Guard,Steel,Alert Orange. & Recepticles.
$
3.52
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Wilton 1755 Combination Vise,Swivel,Heavy Duty. Linemaster 522-D28 Foot Switch Guard,Steel,Alert Orange. Light Industrial. & Recepticles. Electrical Outlets. ... moreand Enclosures. Electrical Boxes. General Purpose.
$
11.88
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Linemaster 522-D28 Foot Switch Guard,Steel,Alert Orange. Light Industrial. & Recepticles. Electrical Outlets. and Enclosures. Electrical Boxes. General ... morePurpose. & Industrial.
$
46.19
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Wiegmann Np2424 Enclosure Inner Panel. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
$
41.25
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
& Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
$
4.79
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
RPM 18,000 RPM, Rubber Cushion, For Use With Spiral Bands. Linemaster 522-D28 Foot Switch Guard,Steel,Alert Orange. & Recepticles. Electrical Outlets. ... moreLight Industrial. and Enclosures. Electrical Boxes.
$
5.84
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
MORSE Bi Metal Hole Saw Variable Pitch Cat. No: AV76- 4 3/4" 4 1/2" Tap) NEW In Box NEW
$
55.29
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
MILLER ELECTRIC. Linemaster 522-D28 Foot Switch Guard,Steel,Alert Orange. Electrical Boxes. Electrical Outlets. & Recepticles. Light Industrial. and Enclosures. ... moreGeneral Purpose.
$
116.79
Buy It Now
Free Shipping
Condition: New
Location: United States
& Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
1 2 3 4 5 6 7 8 9 10 11 12
 In 

Former Listings  
 
USA MADE WILTON BULLET COMBO BENCH VISE W/ PIPE JAWS SWIVEL BASE 60176
DESCRIPTION: PICK UP IS AVAILABLE; USED. WILTON BULLET VISE WITH REMOVABLE PIPE JAWS. THE JAWS ARE 3 1/2 WIDE AND OPEN TO 4 1/2 APPROX. THERE ARE SCUFFS AND SCRATCHES FROM USE. THE JAW FACES LOOK GOOD. THE VISE WILL BE BOLTED TO A BOARD AND PACKAGED WITH CARE. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW ... moreCLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International governmen
Vintage Wilton 3-1/2" Jaw Bench Vise With Swivel Base, Pipe Grips, & Anvil
Vintage Bench Vise Wilton 3-1/2" jaws. Swivel base, pipe grips, and anvil Solid and in working order Buyer to pay $12.99 shipping Thanks for looking and good luck!
Super nice Wilton bullet vise 35 lb Cadet 4 1/2 wide jaw machinist pattern maker
Estate find. 4 1/2" wide jaws, swivels and opens smoothly; it does need some clean up, new paint and there is a slight misalignment of the replaceable jaws; weighs 35 pounds. AS IS AS SHOWN. Pick up in Webster. NY no charge or see shipping calculator for shipping. Please see my other auctions. For steam punk; woodworking; blacksmith; tinsmith; machinists automotive, heavy duty mechanics tools for the mining, farming, trucking and logging industries. We will be liquidating a large estate consisting of military items. Woodworking tools, automotive tools, machinists tools, mechanics tools, collectibles, antique and primitives and more. Please put us in your favorites you will not be disappointed. Please note. Unless noted as new, the items I am auctioning are old and/or used. Because of this, they are sold AS IS, as found, the same as in ... moreany other auction. I will try to describe these items to the best of my ability and would not misrepresent anything intentionally. I list the defects, problems and imperfections I see on the items, but I can sometimes miss something or make a mistake. I will admit that I am not an expert on everything I sell so please look at the pictures for condition and e-mail me with any questions before bidding. I try to answer every question asked, but cannot guarantee an answer if you ask the day the auction ends. All items are sold AS IS AS SHOWN. NO REFUNDS AND NO RETURNS. INTERNATIONAL BUYERS PLEASE E-MAIL FOR SHIPPING COST BEFORE BIDDING. PLEASE CHECK WITH YOUR COUNTRIES SHIPPING RESTRICTIONS BEFORE YOU BID. WE WILL NOT BE RESPONSIBLE IF ITEMS CANNOT BE LEGALLY SHIPPED TO YOU. ALSO PLEASE DO NOT ASK US TO SHOW AS A GIFT OR MISREPRESENT THE CONTENTS OR VALUE. WE WILL NOT! Please see the shipping calculator. E-bay is now charging fees on the shipping also, I normally ship via USPS or UPS. We have a handling/packaging charge of $6.00 included in our shipping charges(this is not your total shipping, you must see the shipping calculator or flat rate shipping in the item description)Our $6
Vintage heavy duty quick release Wilton woodworking vise great condition
Vintage heavy duty quick release Wilton woodworking vise that mounts under your workbench. The jaws of this vise are 7" wide and 4" tall. The vise opens slightly more than 8-3/4" There is a retractable dog on the front jaw. The vise opens and closes and the dog extends and retracts smoothly. The vise weighs 27 pounds and is made in America. Shipping via UPS Ground.
Vintage Wilton Bullet Vise USA Number 6 On The Bottom
Welcome to my Auction for this vintage vise in good shape. it is a number 6 a smaller one.made by Wilton company. This Item for pick up only. Thank you very much for looking.
VINTAGE WILTON CADET MACHINIST MECHANICS BENCH VISE 5"JAWS USA 360% SWIVEL BASE
From an Estate- 1 Vintage Used- Wilton Cadet Bench Vise- Heavy Duty! Has 5" jaws. Opens up 7" 360% swivel base. Is in used condition- scrapes and scratches-paint loss. Nicks, dings,scrapes, scratches, hammer, drill and saw marks, grease, hammer marks on crank rod handle, 1 mounting hole is elongated. Weight approx. 50 pounds. Will ship by FedEx ground.
Wilton 4 1/2" Jaw Swivel Base Bullet Vise USA
Please check the photos to verify condition and correctness of item. I will combine shipping whenever possible. Email me to request an invoice before paying for multiple items. Please check my other listings. Payment must be made within 2 days of auction close. I will appreciate positive feedback after you are satisfied with the item. I will then return good feedback. If you feel the item is not as described please let me know before leaving feedback. I want to work with you to resolve any problems. Email me any questions you have before bidding. Thanks for looking.
Wilton vintage #101028, 4" jaw, swival bullet machinist vise
This is great vise that has been used only one time for pass 23 years. Since we set up our machine shop. This vise was been used for holding one inspection tooling plate. Never been removed 23 years. Consider a new vise. We closed our machine shop last week. Finally first time removed from tooling bench. This is all original and never altered. The vise 4" jaw.3.5' deep, 7" max open. Ant question please call 503 703 4768.
WOW! WILTON POWRARM BULLET VISE JUNIOR 920 MACHINED PLATE TOOL MACHINIST
WHAT A GEEAT FIND! THIS IS A WILTON USA 920 TOOL MFG. BABY POWRARM BULLET VISE WITH MACHINED BASE PLATE. THIS Has 2" JAWS AND THIS IS IN PERFECT WORKING ORDER. I PURCHASED THIS FROM AN ESTATE SALE FROM A RETIRED NASA EMPLOYEE. THANK YOU FOR LOOKING AND CHECK OUT MY OTHER AUCTIONS!
WILTON VISE TRADESMAN 1740, RARE 4" JAWS, EXCEPTIONAL!!!
Description Tradesman vises have been around since the 70's. The 1st models. 1740& 1750 were poorly made. If you call Wilton corporate, they will tell you these vises were made here. COO was fuzzy at best. A former Wilton employee told me at that time if the costs of the marketing effort exceeded the costs of the product that could actually effect Country of Origin of the product. I don't know. I do know their quality increased as time went on and by the later 80's& 90's made a decent Tradesman. Due to consumer pressure, Wilton finally pulled out, discontinuing the 1740. 1750.$ 1760. Today, all Tradesman's and made here and embossed on the side COO and width of the jaws. As mentioned, I'm not condemning all their discontinued Tradesman's. Actually the later model vises improved greatly over time but since ... morethe"Wilton" name was as American as Apple Pie, the USA consumer pressured Wilton Tool to present new models, all being made here. Again, COO with Wilton Tool Corp was not clear. This is a rare 1998 Model Tradesman 1740 that's stamped. There are 1750's& 1760's also that were made here but few. As you can see, this vise is in excellent condition. I cleaned, lubed, and removed its faded paint and repainted it a very close Tradesman color. Despite some small chips on the tops of the jaws, All 4 jaws are original to this vise and in excellent condition. The jaws align up perfect. Operation is flawless. The anvil and top slide show very light wear. All 3 handles are well above average. No welds, cracks or pieces missing. Fellas, this vise stuns in the photos and would look even nicer on your bench, tool cabinet or cart. Guys, small USA made 1740's don't come around ever day and with a"No Reserve" bears watching. Note! Despite the fact that this 1740 is about 20% heavier then its off shore counter part, this vise was made for light and light/medium work. If this vise is used properly and not abused, it will give you decades of service. Ship
Wilton Quick Acting 4 5/8" vise with 4 1/2" jaws
Selling a Wilton Quick Acting 4 5/8" vise with 4 1/2" jaws. In good condition. Feel free to make us an offer. Thanks FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. THIS ITEM WILL BE WELL PACKAGED AND SHIPPED VIA UPS. LOCAL PICK UP IS MORE THAN WELCOME. BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. WE CAN ALSO TAKE A CREDIT CARD OVER THE PHONE OR IN PERSON. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
1977 Wilton 350S Heavy Machinist Bench Vise-Nice,Tight & Light use
This auction is for 1) Wilton 350S Heavy Machinist Vise in very nice condition. 3 1/2" wide jaws. Approx. 6"max opening. Made in 1977,massively built, This was Wilton's premium professional vise line. This has seen just light one-owner hobby use in a home workshop since purchased new back then. Crisp unworn jaws,straight mainscrew& handle. Most of the original finish remains. Nice& tight operation with NO slop or play. Original handle rubbers.No cracks,damage or surprises.just good stuff:Just light work marks here& there. Some abrasions on top of swivel locknuts that just looks like errant filing on edges.Nothing horrible, see pics. This will weigh 45lbs packed and be very safely packed.UPS is best for this size/weight. I will discount UPS shipping 10.00 from calculated amount shown. Please feel free to ask any questions.
Vintage Wilton Swivel Bullet Bench Vise 3-1/2" Jaws Schiller Ill. 39 Pounds
Vintage Wilton Swivel Bullet Bench Vise 3-1/2" Jaws Schiller Ill. 39 Pounds-Serrated Removable Jaws Key Way is Stamped 6 77-Opens to roughly 6" Fresh Paint 7-1/2" High 3-1/2" Wide Jaws Total length 14" Spindle tightening Rod is slightly bent Note: Buying as is: Please check out our photographs to see more detail on any damage. Etc. Please feel free to use the enlargement and zoom features to be sure you get a good overall view of this item. We are not experts, but we do our best to accurately photograph and describe our products. Please ask any questions ahead of time so that we have plenty of time to try to get back to you. We will do our best to answer them accurately. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14789f288ad-0x109-
WILTON 3-1/2 JAW UTILITY BENCH VISE W/SWIVEL BASE AND PIPE GRIPS MADE IN USA
WILTON UTILITY BENCH VISE. WITH SWIVEL BASE AND PIPE GRIPS. VISE IS IN GOOD WORKING CONDITION FULLY FUNCTIONAL. MADE IN USA. MODEL 111109. 3-1/2' JAWS. JAWS OPEN UP TO 4-1/2' 12' OAL WHEN CLOSED. 6-5/8' HIGH. VISE WEIGHTS 17 LBS 11 OZ. LARGE ANVIL SURFACE. THIS VISE WAS NOT SAND BLASTED OR REPAINTED.WHAT YOU ARE LOOKING AT ITS JUST CLEAN BARE METAL* THE ONLY*CON* IN THIS VISE IS THE WELDING REPAIR DONE IN THE SWIVEL BASE. I have made an honest and fair evaluation of this item, but I am only human. I do miss things occasionally, and if things is not as I have represented it, I certainly will do what I can to make it right. I reserve the right to change mail carriers.I pack all packages very carefully and as lightly as possible.I ship whichever postal method is the least expensive for each individual package and I will combine ... moreshipping for discounts so please check my listings to get the most bang for your buck! Most packages ship the next day after payment but please allow 2 days as my schedule is unpredictable and if you are in a hurry please tell me and I will make a point to get it out the next day. I report ALL NON PAYERS so if you are not going to pay.don't buy. If you have a problem and need more time, please ask as I will work with you, but deliberate non payers and non communicators will be reported. I welcome ALL INTERNATIONAL buyers but please be aware of a couple things.I usually ship Priority International,however insurance is not available with this service nor is tracking once it leaves the United States.Also please be aware of your country's Duty Regulations as to what is allowable in your country and what the possible duty fees are as this is not covered in your purchase price
VINTAGE WILTON 5 IN JAW HEAVY DUTY TRADESMAN VISE WITH SWIVEL BASE & PIPE GRIPS
VINTAGE WILTON 5 IN JAW HEAVY DUTY TRADESMAN BENCH VISE WITH SWIVEL BASE& PIPE GRIPS. Great mechanical vise.in raised numbers 1750.Stamped numbers 111052 on one side,111051 on the other.it has swivel base with two locks,works fine. Vise shows normal signs of age and use,solid no cracks or repairs. jaws meet squarely. Jaws open up to 5' 15' overall length when closed. 8-5/8' high. Vise weights 46 lbs. large anvil surface. THIS VISE WAS NOT SAND BLASTED OR REPAINTED,WHAT YOU ARE LOOKING AT ITS JUST CLEAN BARE METAL*
Nice Little Antique Wilton 6-1/2" Carpenters Wood Working Work Bench Vise Clamp
Nice Little Antique Wilton 6-1/2" Carpenters Wood Working Work Bench Vise Clamp Selling with No Reserve! Hi! I have for auction here a nice little Carpenters Bench Vise. It needs some cleaning but is in good usable condition. Help yourself to a good deal! I do combine shipping whenever possible. Local pick-up is always welcome! For more information you can call Davey at: 989-240-0027. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 7 days of Auction end. We appreciate your prompt payment. We accept payment thru Pay-pal. But prefer cash for pick-up items.please contact us for details or if you have questions about different payment methods. Payment can be mailed to: David Shell 1473 W. Surrey Road. Farwell. MI 48622 Standard Shipping: Our items are shipped U.S ... morePostal Service or FedEx. We ship within 24 hours of payment. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the Winning Bidder of multiple Auctions and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 90 days. After 90 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" With no warranty or guarantee. You are looking at Items listed by Davey's Salvage. We are a small family run business located in Central Michigan. We do Demolition. Junk Removal, and also clean out Houses, Farms, and
Wilton C1 Combo Pipe and Bench Swivel Vise 4 1/2" Jaws 6" Opening American Made
This listing is for a used Wilton C1 Vise. Holds up to 6" pipe 6" jaw opening 4 3/4" Throat 4 1/2" Jaws Swivel If you do not want to pay shipping local pick up is always welcome. This vise is used but in good condition. There is no play in the vise and the jaws are not worn. Please see pictures for more detail.
Small Old Wilton Vise With Powerarm Base Great For Machinist & Jewelers n/r
Got this from a retired airline machinist everything works however the screws attaching the vise to the base are not correct. Overall the vise is about 7 1/2 inches tall x 5 1/2 long x 3 inches wide. High bidder pays shipping. MO residents pay sales tax. Powered by The free listing tool. List your items fast and easy and manage your active items.
WILTON AW45 Combination Vise Swivel 4-1/2 In Jaw Ductile Iron Rusty
I am offering a new WILTON AW45 Combination Vise Swivel 4-1/2 In Jaw Ductile Iron that is being offered as used because it is rusty. This came off a pallet of new product that somehow got wet. And that is why you see rust in the pictures. This is brand new, never used, but clearly has some cleaning and rust issues to address once this arrives at your door. Because this is not new/ perfect I am offering the vise with no minimum and no reserve auction. Please review the pictures before bidding. Specs: Item Combination Vise Vise Type All-Weather Jaw Width 4-1/2" Max. Opening 6" Throat Depth 4-3/4" Pipe Capacity 1/8 to 3-1/2" Base Type Swivel Pipe Jaw Included Yes Jaw Face Serrated Jaw Type Replaceable Number of Lock Down Bolts 2 Material Ductile Iron Body Casting 60.000 psi Swivel Angle 360 Degrees Number of Mounting Points ... more4 Mounting Hole Dia. 1/2" Overall Length 14-1/2" Overall Height 10-1/2" Overall Width 5-1/2" Features Alloy Steel Slide Bar. Self-Centering Nickel Plated Pipe Jaws Hold Up To 3-1/2" Pipe Safely and Securely, Large Anvil Work Surface, Keyed Slide Bar, Enclosed Construction Keeps Lubrication In and Contaminants Out. Perfect for Outdoor Use Thanks for looking and good luck bidding.
Wilton 1644 644 Bench Vise 4'' Jaws 4'' opening pipe jaw small anvil !
Greeting Wilton Vise lovers and soon to be owners! Up for auction is a Wilton 1644/ 644 bench vise made in Schiller Park. Illinois U. S. A It weighs 35 lbs, has 4' jaws and opens to 4 1/4' This vise opens and closes smoothly and the jaws line up as they should and they look like new.It spent it's life in a retire's basement workshop.The light oxidation you see was from the basement humidity. Please look closely at the attached photo's as the provide the best overall physical condition. I would prefer local pick up on this item but will ship it at the buyers expense. The package.Which will may entail a small crate will measure 14' x 14' x 16' and weigh approximately 35lbs. I ship U S P S from 48089 usually within 3 days of confirmed payment to my pay pal account. I ship to pay pal confirmed addresses only. Please ... moreNote: It is my policy to re-list items that have not been paid for within three days of being invoiced. If payment is made before the item is sold it will be delivered to the original purchaser. I am willing to ship this item worldwide via USPS* Overseas shipping must include tracking capabilities.All shipping costs are the responsibility of the buyer. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1478eb69ef2-0x114-
WILTON 161072-10 Wood Vise with Quick Release
Up for bid in this auction is a WILTON Wood Vise with Quick Release feature. This vise has the WILTON model designation of 161072-10. This is a lightly used vise that was rarely used and is in very good condition. Thanks for loooking. Check out my! Be sure to add me to your! Combined shipping is available. 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-1478eb6a059-0x114-
Wilton 1645 Medium Duty Mechanics Bench Vise, 5" Jaws
Up for sale is a very nice looking Wilton 1645 medium duty bench vise. It has seen some use but it was light and the overall condition. Even before being cleaned/painted, was very good. This vise is a bit older and has some of the older design cues not seen on newer vises of this style. Lots of the parts are compatible with similar size"bullet" vises. The rounded 4 hole base. Lockdown assemblies and horseshoe retainer collar would bolt right on to a bullet vise. The jaws on the vise look good with lots of life to the serrated teeth. The pipe jaws are made of cold formed steel. Not machined steel, but still work great at holding round items This vise has 5" wide jaws and a throat depth of 3 3/4" it's max opening is 6" and weighs about 39 pounds. The"anvil" area is quite large and was resurfaced after ... moreeverything was painted with a closely matched Wilton hammer tone blue dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1478f4c2bd7-0x114-
Big Wilton # 281 Bullet Bench Vise swivel base old hand tools
Up for bid: Big Wilton Bench Bullet Vise as follows: C 281 The vise is 18" long. 9 1/2" high, and 9" wide at the widest part of the swivel base. Jaws are 4 1/2" wide and open 8" Weighs about 72 lbs. Opens and closes with ease. Jaws line up when closed. Some real light wear to the jaws. Otherwise. In real nice condition. Please note: UPS does not deliver to post office boxes-will need to be delivered to a physical address. UPS also likes to have a contact phone number. Please contact me if you have any questions. Click here to check out my other items. Please add me to your favorites list!
WILTON 6" TRADESMAN SWIVEL BASE VISE w/PIPE JAWS No. 1760 / 6" COMBINATION VISE
WILTON 6" TRADESMAN SWIVEL BASE VISE w/ Pipe Jaws Model No. 1760 6" Jaw Width/ 6" Jaw Opening/ 4" Throat Depth Condition: Good(Opens& Closes Smoothly) Questions? call Metro Machine& Tool 732-650-0666.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14793f2a71d-0x10e-
Vintage Wilton Bullet Vise # 4 excellent condition a real beauty works perfect
Good morning folks.From an old Western Maine Homestead. Just picked by me, last week, I have this Early Wilton# 4 Bullet Vise in excellent plus condition, everything works as it should, Jasw are 4" wide, and vise opens to 6" Embossed WILTON TOOL CO. ON ONE SIDE, and WILTON VISE N0 4 PAT PEND USA on the other side.One would be hard pressed to find a nicer example of this early wilton vise.HONEST, OLD, AND FRESH TO THE MARKET
VINTAGE BENCH VISE…WILTON SCOUT 3.5"…ANVIL TOP - SWIVEL BASE - PIPE JAWS
VINTAGE BENCH VISE WILTON SCOUT 3.5" ANVIL TOP- SWIVEL BASE- PIPE JAWS, NEVER USED…LIKE NEW CONDITION,
FREE SHIPPING! Wilton Model 835 Bullet Machinist Vise Stationary Base 3.5" Jaws
You are bidding on a: Wilton Model 835 Bullet Machinist Vise Stationary Base 3.5" Jaws This vise is in very good working condition. It does have some original paint loss here and there. See photos, but the action works smoothly and it has no other issues. Please examine all photos as they are part of the item description. I will ship FREE to anywhere in the Continental USA! Please note my 14 day return policy. See my 100% satisfaction rating, read my buyer feedback and bid with confidence. Communication If you have a problem or question regarding your transaction please contact us before leaving any type of feedback. We will work with you to resolve any problem you may have. PLEASE BE CAREFUL NOT TO ACCIDENTALLY OPEN A CASE. OUR USER ID IS DavesCyberStore. Dimensions: 14.5" Long with the jaws closed it opens to 6" and stands ... more7" tall Weight: 36lbs 6oz's.
Wilton style Pivot Jaw Woodworkers Vise wood vice
great used wood vice wilton style pivot jaw vice
Vintage WILTON SHOP KING bench VISE 3.5"jaws pipe jaws Swivel base, Anvil Hardy
WILTON SHOP KING bench vise with 3.5" wide jaws. Steel serrated pipe jaws, cast iron swivel base. It has nice replaceable serrated steed jaws. smooth operating condition. Weighs 19 lbs. has an excellent anvil section with no damage and has the hardy hole. Says Chicago 17 USA. As you can see this Vise has it all and has a lot of style. INSURANCE INCLUDED IN SHIPPING COST. MORE PAYMENT OPTIONS ARE WELCOME. EMAIL THE SELLER. Powered by The free listing tool. List your items fast and easy and manage your active items.
Wilton 5" Mechanics Bench Vise--Swivels, Pipe Jaws, Anvil
You are bidding on a nice Wilton Vise in good working order. Jaws are 5" wide and open to approximately 4 1/4" Vise weights approximately 15 + lbs. Look at pictures ask questions if concerned. REGIONAL RATE SHIPPING IS AVAILABLE FOR THOSE ELIGIBLE. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-147a4badeca-0x10d-
Vintage Red Wilton 4 1/2" Vise w/ Truck Hitch Mount
YOU ARE BIDDING ON A VINTAGE RED WILTON 4 1/2" VISE WITH TRUCK HITCH MOUNT. IT IS USED BUT IT IS IN GOOD CONDITION ASIDE FROM HAVING SOME SCUFFS AND SCRATCHES FROM NORMAL USE. IT COULD ALSO USE A CLEANING. BUT OTHER THAN THAT IT IS ALRIGHT. Feedback WE WANT POSITIVE FEEDBACK- Feedback left after feedback received! Did you know? On eBay. A NEUTRAL feedback rating is treated exactly the same as a NEGATIVE feedback? Please do not leave a negative or neutral feedback without contact from us ot help resolve any issue! We are committed to satisfaction of your purchase. If you are not satisfied with your purchase in anyway please give us an opportunity to make it right before leaving feedback. Please give us an opportunity to make it right Monday- Friday 9-5 Central time 217-258-7296 or you may ask a question through ebay's contact a seller ... moresection. Please do not email us directly. As you many not get a response. Shipping And Handling OUR SHIPPING AND HANDLING COVERS NOT ONLY POSTAGE. BUT PACKING SUPPLIES, LABELS, TAPE, AND MOST OF ALL OUR TIME. IF YOU DON'T LIKE THE SHIPPING COST, PLEASE DO NOT BID. IT TAKES TIME TO PACK AND SHIP ITEMS NO MATTER HOW SMALL. SHIPPING WILL NOT BE ADJUSTED AFTER AUCTION HAS ENDED. IF YOU HAVE A QUESTION, ASK BEFORE YOU BID WE SHIP OUT MONDAY THROUGH FRIDAY. ITEMS PAID FOR ON FRIDAY MIGHT NOT GET SHIPPED OUT TILL MONDAY. NO INTERNATIONAL SHIPPING FOR ANY ITEM.
RARE DODGE SLIDE SET SWIVEL BENCH VISE MISHAWAKA IN USA Machinist "Not Wilton"
SELLING A RARE DODGE SLIDE VISE THIS IS SIMILAR TO THE COMMON WILTON SLIDE VICE. MADE BY THE DODGE MFG COMPANY IN MY HOME TOWN OF MISHAWAKA INDIANA. THE STORY WAS THAT THEY ONLY BUILD THESE VISES FOR USE IN THE FACTORY. NOT MISSING ANYTHING WORKS WELL BUT NEEDS SOME CLEANING AND LUBE. 4 INCH WIDE JAWS SWIVELS WHEN YOU LOOSEN THE SIDE LEVER. HAS SOME CUTS DINGS AND OTHER BLEMISHES FROM USE. NEEDS A GOOD CLEANING. SOLD AS IS NO RETURNS ACCEPTED LOCAL PICK UP IS AVAILABLE. I WILL SHIP THIS FAST AND SAFE. ONLY FOR SALE TO THE LOWER 48. USA ONLY SHIPPING IS A FLAT RATE OF 49.99 AND I PLAN TO SHIP IT EITHER FED EX OR UPS( PRICE DEPENDING) IF YOU HAVE A SHIPPING PREFERENCE PLEASE LET ME KNOW WHEN YOU PURCHASE THE ITEM. I BUILT A STUDY WOOD CRATE TO SHIP THIS IN. NOTE YOU WILL NEED A PHILLIPS SCREW DRIVER TO OPEN THE CRATE. DONT MISS THIS RARE PIECE ... moreANY QUESTIONS PLEASE FEEL FREE TO ASK. BE SURE TO CHECK OUT MY SIMILAR ITEMS THANKS FOR LOOKING GOOD LUCK
WILTON VISE Spindle 900005 fits 400 Series BULLET 15.5"L Mint
For your consideration is a used WILTON VISE Spindle 900005 New fits 400 Series as well as other models. Includes: Spindle only*Please examine all measurement data given below. Because these spindles can fit various other models not listed. Measurements and Specs: Length: 15.5" OAL Slide: 10.5" Long and 0.675" Dia ACME Thread OD: 0.870" Thrust Collar OD Dia: 1.735" Thrust Groove ID: 1.350" Thrust Groove Width: 0.260" 5
Vintage Wilton Bullet Bench Vise 3.5" Jaws Made In Schiller Ill. USA 41 lbs.
Vintage Wilton Bench Vise with pipe claws. Opens to 6+ inches. Functional. wear and welds as seen in photos. Shiller, IL manufactured, embossed 1835 model. with"33" on spline.
5 & 1/2 Inch Wilton Swiveling Anvil Bench Or Utility Vise For Your Workshop
Wilton 5& 1/2 Inch Swiveling Anvil Bench/ Utility Vise for the machinist. Mechanic, logger, farmer or heavy equipment owner 5& 1/2 Inch wide jaws that open 5& 1/2 Inches Pipe jaws are just as they appear Opens and closes easily Weighs in at about 29 pounds This is a used vise. But it is still ready to work for you This fits in a large flat rate box which will make for low cost shipping! Email me with any questions Check out my other listings Bid to win this quality vise and make it yours!
wilton vise model 820
the item up for sell is nice wilton vise model 820 came from aircraft mechanics estate auction nice stuff. thanks.
Wilton 400 4" Bullet Bench Vise Swivel Base
I have for your consideration a WILTON USA 400 4" Ductile Iron Bullet Swivel Vise. Rest assured this vise is good quality with ductile iron. Locking swivel base, 360 degrees of rotation, with double lockdowns and four mounting posts. Please check out my other listings as we have an assortment of used tools/equipment from residential, commercial, and industrial.
Wilton 4" machinists vise w/swivel base in great shape ! USA MADE
This 4" Wilton has the 7" throat. I have owned this vise for 25 years. I'm retiring and selling all my tools. Please see my other listings. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-147addd303d-0x106-
VINTAGE WILTON WOODWORKING VISE, 7" QUICK ACTION SCREW, WITH DOG,U-CLEAN & $AVE
PULLED FROM A WORKING SHOP.WILL NEED TO BE CLEANED UP, NEEDS PAINT AND LUBE& A NEW HANDLE 7" WIDE JAW. SHIP LOWER 48 ONLY
WILTON WOOD VISE 6 1/2'' JAWS WOODWORKING VICE CARPENTER TOOL MADE IN USA
WILTON WOOD VISE 6 1/2' JAWS WOODWORKING VICE CARPENTER TOOL MADE IN USA In good working condition. But does show signs of wear, some grey paint overspray and the handle has a slight bend to it. The handle works as normal, but please see last pictures for details. Please view all the pictures to see condition of this item before you bid. Thank you!
VINTAGE WILTON CHICAGO 14 "SHOP KING" SWIVEL BENCH VISE (5" JAWS)
THIS SALE IS FOR A VINTAGE WILTON"SHOP KING" SWIVEL BASE BENCH VISE. IT HAS 5" JAWS AND IS IN VERY GOOD CONDITION. IT HAS BEEN TAKEN APART AND GLASS BEADED. REPAINTED AND REASSEMBLED. EVERYTHING IS IN GOOD WORKING ORDER. ANY QUESTIONS ABOUT THIS ITEM PLEASE CONTACT ME, LARRY. THANKS FOR LOOKING.
Vint. WILTON Bullet Machinist Swivel Base Bench Vise 3" W Jaws Opens to 4 3/4"
Vint. WILTON Bullet Machinist Swivel Base Bench Vise 3" W Jaws Opens to 4 3/4" Search Hi. This auction is for a vintage Wilton bullet machinist swivel base bench mount vise as shown. The vise is in good working condition. I don't know why the number is missing and I don't know why there is a gap on each side of the sleeve as shown. It has nicks, dings, rust, pitting, discoloration, scratches, chips, loss of finish, los of paint, the bushing for the base is a replacement, and the vise is dirty. It is being sold as found with the exception of the replacement bushing and a coating of boiled linseed oil which has been applied to help prevent further rust. S& H charges are an estimate. Any overpayments will be refunded to your account. Sold As Is, Where is. I am not an expert and I do my best to describe each item accurately. ... morePlease look at all of the pictures and be sure to scroll down to the very end of the listing in case there are more pictures added. I take a lot of pictures to help show the actual condition. If you have questions please ask before you bid. Sol d As Is. Insurance is included in the shipping cost to protect both the buyer and seller. If you do not want insurance you must let me know and I will remove it from the invoice that I will send to you. If you decline insurance. I will not be responsible for any lost or damaged items once they are shipped. I Do Combine Shipping. I will ship via USPS. Please check out my other items up for auction. Thank you for looking and good luck bidding! Payment must be received within 5 days of the end of the auction. I accept: PayPal Once payment has been received. I will ship via either Priority Mail, First Class Mail, U.S.P.S. UPS Ground or whatever the appropriate shipping co. is. All of the items sold are old and used and are not perfect. New items will be listed as such. Buyer assumes all responsibility/risk of damage and injury due to functional use or misuse of any and all items purchased. All items are sold as is. Whereas, no return unle
Vintage 2" Jaw Hobby - Portable Clamp On Vise Anvil-Very Good Condition Wilton?
Vintage 2" Jaw Hobby- Portable Clamp On Vise Anvil. No.161. Very Good Condition. Jaws open up to 2' 1-3/8' table mount range. Although this vise does not show markings. I believe it was manufactured by WILTON*THIS VISE WAS NOT SAND BLASTED OR REPAINTED.WHAT YOU ARE LOOKING AT ITS JUST CLEAN BARE METAL*
VINTAGE WILTON CHICAGO 6-12''/JAW WOODWORKING VISE UNDER-BENCH MOUNT VICE
VINTAGE WILTON 6-1/2' JAW WOODWORKING VISE UNDER-BENCH MOUNT. MARKED 1203 WILTON CHICAGO USA JAWS OPEN UP TO 7' 12' OAL WHEN CLOSED 2-1/4' JAW DEPTH. VISE WEIGHTS 8 LBS APROX. SOLID.NO CRACKS. THIS VISE WAS NOT SAND BLASTED OR REPAINTED,WHAT YOU ARE LOOKING AT ITS JUST CLEAN BARE METAL* 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-147af356fe0-0x117-
Wilton #11127 Utility Bench Vise w/ Swivel Base 5-1/2" Jaw Width
Wilton Bench Vise Jaw Width- 5-1/2” Opening Capacity- 5” Throat Depth- 3-1/4” Base Type- Swivel Material- Ductile Iron Pipe Capacity- 2-1/2” Model: 11127 MSRP: $120 Item is used with minor cosmetic wear(dirt. Light scuff marks; see pictures) The leadscrew is not attached to the front jaw so it does not travel forward on its own, can only be tightened or closed. Comes exactly as shown in pictures. Shipping Weight: 35 Lbs. Shipping Dimensions: 15” x 8” x 8” Local Pickup Is Welcome* To keep prices as low as our customers need them. We do not handle transactions over the phone. Many people feel initial frustration at this, but we do answer questions, when it is in our power to do so. We often direct our customers to a manufacturer's website. We do not recommend any product for any application, nor do we try to advise our buyers to purchase ... moreone product over another. Phil/ 8.6.14/ P 35 C/ 53875
VINTAGE Wilton Variable Tilt Head Vise - 4" Jaws For Metalworking w/Pipe Jaw
Vintage Wilton variable angle tilt vise. Tilts 180 degrees in either direction and locks into place at the desired angle. Jaws are 4" wide and slide opens to approximately 4" wide. Jaws meet square when closed and are for metalworking. This is a used vintage vise being listed in"as-found condition" but has PLENTY of life left in it. Made in the USA! Please let me know if you have any other questions. FREE SHIPPING IN THE USA VIA FEDEX GROUND OR USPS. I decide shipping vendor based on your location!
Vintage Wilton Chicago Baby Bullet Bench Vise 2 inch jaws swivel base
This"baby Wilton" is in perfect working condition. She has been oiled and every moving part turns freely. She has the usual nicks. Scrapes, paint and rust that tools of this age have. Even a few sets of initails have been scratcched out thru the years. But even with these flaws I could not think of giving her a facelift. In my opinion"this baby has aged very nicely" Look at the pics. See for yourself. P.s. she comes on a removable.weighted base.total weight.18 lbs.
Wilton Bullet Vise 2 1/2 820 USA
This auction is for a Wilton Bullet Vise 2 1/2 820 USA. This vise is in good condition. It looks to be the original paint. Buy as is. Buyer pays shipping and handling. Cost depends on location. Look carefully at the pictures.
Wilton Bullet Machinist's Vise 3 1/2" Jaws - 5 1/2" Opening - Schiller Park, Ill
Wilton Bullet Machinist's Vise 3 1/2" Jaws- 5 1/2" Opening- Schiller Park. Ill- Nice, older vise in good usable condition. Shows use but nothing really wrong with it. Ready to use right now, just bolt it to a bench. Or it would be an easy restoration, mostly paint and maybe a new set of jaws. Plain base vise, has 3 1/2" jaws, opens to max of 5 1/2" There are no cracks in the castings, original, blue paint is mostly gone, jaws have some small chips, please see the pictures, one jaw screw is a replacement. Rear cap is dinged. Vise has just been disassembled and greased. Working perfectly. This is from when Wilton was in Schiller Park, Ill. The spline is stamped 670, which, I believe, means it was made June, 1970. The main casting is marked 101020. The nose casting is marked 835. Any questions, just message me. Winning ... morebidder to add postage based on weight and distance. Thanks for looking!
Wilton 7" Offset Corner Woodworking Under Mount Bench Vise Carpenter Woodworker
Wilton 7" Offset Corner Woodworking Under Mount Bench Vise This vise is a must have for the serious woodworker. It's offset so that makes it much more useful than the standard vise. The throw is 9" It does have some surface rust on the face of the jaws. But I'm sure it will clean up great. Fully functional with no damage or repairs. Please view all the photos as they are an important part of the description. It will be carefully packed and fully insured for a safe delivery. Sorry. No Local Pickups Payment must be received within 5 days. WE DO NOT SHIP TO Puerto Rico or Guam. Hawaii and Alaska will only be shipped Priority Mail. Please calculate Postage Prior to bidding. WE ONLY ACCEPT PAYPAL AS PAYMENT METHOD. Insurance is automatically included when you opt to have your item shipped using UPS Ground only. We describe our ... moreitems to the best of our ability. But in the unlikely event that theirs a problem, please contact us and see details in our return policy below.
MECHANICS VISE WILTON TOOL 1645 MEDIUM DUTY BENCH VISE *
MECHANICS VISE WILTON TOOL 1645 MEDIUM DUTY BENCH VISE. VISE IS IN WORKING ORDER. PLEASE REVIEW PICTURES FOR MORE DETAILS AND INFO ON CONDITION. THE ITEM(S) IN THE PICTURES WILL BE THE ITEM(S) YOU0. WILL BE RECEIVING. EVERYTHING AND ONLY WHAT IS IN THE PICTURES IS INCLUDED. I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. I ACCEPT PAYPAL- PAYPAL CONFIRMED ADDRESS PREFERRED- I SHIP EVERY MONDAY, WEDNEDAY AND FRIDAY OF THE WEEK,SO PLEASE BE PATIENT YOUR ITEM WILL BE SHIPPED AS SOON AS POSSIBLE- SORRY ... moreNO INTERNATIONAL TRANSACTIONS ALSO NO SHIPPING LARGE ITEM TO P.O. BOXES, ALASKA,HAWAII APO or FPO.WILL ONLY SHIP TO THE LOWER 48 STATES.
VINTAGE WILTON NO. 4 HD BULLET SWIVEL MACHINIST VISE SWIVEL BASE!
YOU ARE BIDDING ON A VINTAGE WILTON NO. 4 BULLET BENCH VISE THAT IS NICE USED CONDITION. JAWS ARE 4" AND VISE MEASURES 15" WITH JAWS CLOSED AND OPENED TO 6" THE VISE IS NUMBER STAMPED CF40 ON ONE SIDE AND 18-43 ON ANOTHER SIDE. THE DIGIT NEXT TO 4 LOOKS LIKE 3.MAY BE 5. LUBRICATION HAS BEEN WELL MAINTAINED ON THE VISE AND OPERATES SMOOTHLY. I BELIEVE THE VISE TO BE FROM THE 1940'S. THE BASE SWIVELS AND IS CONTROLLED BY THE BOLDS ON UNIT BASE. THE VISE IS MARKED WILTON TOOL CORP TO ONE SIDE AND WILTON VISE NO. 4 PATENT PEN USA TO THE OTHER SIDE. VISE WEIGHS 39 LBS PRE PACKED. NO INTERNAITONAL SHIPPING AVAILABLE. THEY SHIP UPS GROUND AND WILL BE PACKAGED FOR SAFE SHIPMENT. RETURNS ACCEPTED ONLY IF ITEMS ARE GROSSLY DIFFERENT THAN DESCRIBED SO PLZ ASK QUESTIONS PRIOR TO BIDDING AND I WILL BE GLAD TO HELP. THX AND HAVE A GREAT ... moreDAY!
Vintage Wilton Cadet Swivelling Bullet Bench Vise, Schiller Park USA, 5" Jaws
This bid is for a large quality Wilton"Cadet" swivelling bench vise/bullet vise in good usable condition. No damage. Marked 9.150 under the jaw and dated 6-30-60 on the key way. Has good 5" jaws and opens to a 7" capacity, measures 15" long total and is 7 1/2" high. Made in Schiller Park, USA. Weighs 50 lbs. Winner pays UPS shipping. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-147be9b21c7-0x113-
Vintage Wilton No.930 bullet vise 3" jaws, Chicago, USA
Vintage Wilton No.930 bullet vise 3" jaws. Chicago, USA Very nice vintage. Made in the USA, Wilton bullet vise. Model No.930 with 3" wide jaws and approx. 4 1/2" usable opening. Jaws and screw show minimal wear or abuse. Jaws line up square and true. 4-46 date stamp says the vise is doing well for being 68 years old. Disassembled cleaned, coat of paint and new moly grease applied to parts. The vise has normal for age nicks and dings. Vice operates smoothly through entire range of motion. Good for maybe another 68 years. Thanks for looking. USA shipping only. I will combine shipping with multiple purchases. Payment due within 3 days of auction end. gsrx_vers_577(GS 6.7.5(577) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-147c366c20b-0x10d-
wilton bullet vise model 800
wilton bullet vise model 800 This vise as being sold for parts or repair. It doesn't open, turn freely. It looks like it is missing a part inside. Shipping for this item is $35 Thanks
Vintage Wilton Metal Machinist Vise #132 - 2" Jaws
Up for bid is a vintage Wilton metal vise with 2" jaws. It is model 132. It is in good condition and still has the original label on it. It measures 7" x 5" x 4" Please feel free to ask any questions and thanks for looking. Please wait for the final invoice as I will combine shipping on all purchases within 7 days of first purchase. If possible.
WILTON (Wood, Woodworking, Woodworkers) VISE 10 wide 12 open Quick Release
Large Wilton Woodworker's Vise in VG- Exc Condition. Photos show the flaws- mostly minor rust. End of pin on dog has broken off. Quick Release Elliptical Nut in 3rd Photo. 20 1/2 inches overall. 31 pounds. Nice one; Thanks for Looking.
Vintage Wilton 1943 HD9400 Wilton Bullet Vise
Vintage Wilton 1943 HD9400 Wilton Bullet Vise This vintage 1943 Wilton HD9400 Bullet vise is in good overall condition. The vise opens and closes smoothly with no play in the screw at all. It closes shut tight as well. There are no breaks or cracks in the vise either. As per the information on dating these vises even though the date code shows 5-48 this would be the date that the 5 year warranty that was offered on early wilton vises expired. Meaning this vise was probably manufactured around May fo 1943. This would be a really nice hard to find Wilton for someone to add to their collection. Please feel free to ask questions and thank you for looking. Payment for auctions is required within 3 business days or an unpaid item case will be opened through eBay. We do not like doing that so please if you intend to bid on one of our auction listings ... moreplease be so kind kind as to pay for it. I understand things can happen so please if you need more time or are having difficulties please contact us and we can work something out together. We are a family run business and we are really nice people. Most all of our items ship out on the day of purchase excluding weekends and holidays. If you purchase an item on a Friday it may not go out until Monday. However we do sometimes ship on Saturdays. We try our hardest to get your items out right away. Together we have over 20 years in the shipping and receiving business and all of items are packed very well using clean boxes and new packaging materials. We make sure your items arrive safely and in a timely fashion. Most of our items are buy it now listings but we also have auctions. We require immediate payment for most items excluding auctions. If you need time to pay then please ask as we are willing to work with our customers. Happy customers mean a successful business. Our number one goal is to make the customer happy. We are a husband and wife team and we work hard together to make sure new items are added daily to our store. Please check back from time to
Vintage Antique Wilton C Clamp Bench Vise Woodworking Carpentry Welding
This auction is for one vintage Wilton C-Clamp model 406. Terms and fine print If you have any questions we are happy to help. Please ask 24 hours prior to auction end time. We do entertain reasonable offers on all items. Please do your own research to be sure item is correct for your application or use- Buying as is used condition. Any winning bid must pay within 3 days from the time of purchase. We do not deal with second chance offers thanks to past scams. We make every attempt to ship within 2 days once item is paid for and we accept Paypal for payment. Shipping charges are for economy shipping unless otherwise stated and these prices are for destinations inside the USA. We are not responsible for any items damaged in shipping via USPS. UPS, FedEx or otherwise so please state if you would like insurance and wait for invoice before you ... morepay. We combine shipping whenever possible. We do ship to some international locations but anyone outside of the USA must ask for shipping cost estimate prior to bidding. A ny item shipped outside of the USA will have an additional charge depending on location and country of destination. Please provide your township and country in the message so we can confirm we ship to that location. Thank you. And good luck bidding!
vintage Wilton 3" Vise jaws for No.3 Chicago IL 1944 vise 1945 1946
offered by. Guitar O Phonic and ESTATE Junque of Rhode Island phone 401 419 0621 A WORD ABOUT FEEDBACK: I am available to help at anytime. My phone is 401 419 0621. if a problem arises, just call me! vintage 3" Wilton vise jaws from the 1940's This is a nice set of genuine vintage Wilton vise jaws. Removed from a mid 1940's No.3 vise that was marked Chicago IL. Please see the drawing before you bid…it shows the measurements…may also fit other 3 inch models. This set is in average to good condition. Showing light normal shop wear, a couple saw marks, a couple doinks and flea bites. It is a solid re-usable set if you want to restore the best vise on the planet…the No 3 Chicago Wilton. This is a beautiful vintage set complete with the inner posts which are original. Priority insured shipping to usa 5.99 Regarding Returns: compare ... moreyour vise with the drawing(last pic) to prevent the need for a return! If you return them. Buyer is asked to pay shipping both ways so as not to burden a small family business.this then becomes the cost of"trying them out"
Vintage Bench Vise Wilton USA Antique Anvil Woodworking Metal Work Tool Lot Hold
Great looking vise. I can manually open jaws but turning the handle will not open or tighten, and I do not know how to fix, maybe it is an easy repair? Weighs 13 pounds 13 ounces and is 10 1/2 inches in length with jaws closed. Please pay within 24 hours, thanks.
Wilton 176, Light-Duty Woodworkers Vise 33176 slightly used
You are bidding on the great condition Wilton 176. Light-Duty Woodworkers Vise 33176 slightly used shown in the photos. This item will need dusted off due to being in storage. Please look at all photos as they are part of the items description. Questions welcome.
VINTAGE WILTON BULLET COMBINATION C-0 8C0 VISE 3 1/2" JAWS PIPE JAWS USA
VINTAGE WILTON BULLET COMBINATION C-0 8C0 VISE 3 1/2" JAWS PIPE JAWS USA The vise is old but I'm no sure what year it was made. The vise is stamped"8CO" and weights 40 pounds. The vise has a swivel base but is missing the lock handle and has a replacement nut on the bottom side. The vise works good with little play in the handle when you open and close the jaws. It does show signs of use. Has some dings and missing paint. Please view all the pictures to see condition of this item before you bid. Thank you!
Wilton Baby Bullet 2" vise and Wilton Pow-R-Arm 301.1
Here is a magnificent Baby Bullet and Wilton Pow-R-Arm 301.1. This is not a cobbled together unit. This is the way I received it and I believe it came from the factory configured this way. During my restoration process I found factory paint on the steel connector piece tying the baby bullet and pow-r-arm together. Both the vise and pow-r-arm function as new. The bronze jaws are excellent. The vice action is as new. I was torn about how to list these. Do I list them as two separate items or as one piece? Ultimately I decided that since this is such a rare combination and since they started life together they needed to stay together. I completely tore these down. Wire wheeled and buffed every piece, polished and waxed every bare metal section. That was folowed by 4 coats of Hammerite(NOT Rustoleum) and then 4 weeks of cure time for a hard original ... morefinish. Whether you use this in production or just put it on your desk as a piece of art, you will be happy with this vise. FREE SHIPPING!
WILTON 4" Side Tilt Swivel Angle Vise Model 121079
WILTON 4" Side Tilt Swivel Angle Vise Model 121079*BEFORE BIDDING* PLEASE READ ITEM DESCRIPTION. PAYMENT AND SHIPPING DETAILS. TAKE A LOOK AT ALL OF THE PICTURES. THIS IS ONE OF YOUR BEST DESCRIPTIONS ON THE ITEM FOR SALE. ANY QUESTIONS PLEASE CONTACT ME THROUGH EBAY AND I WILL REPLY AS SOON AS POSSIBLE. ITEM DESCRIPTION Please take a look at the pictures they are your best description. PAYMENT DETAILS I PREFER PAYPAL AS THE METHOD OF PAYMENT. ANY QUESTIONS OR CONCERNS PLEASE CONTACT ME THROUGH EBAY. PAYMENT WITHIN 3 DAYS OF END OF AUCTION IS EXPECTED. SHIPPING DETAILS I USE THE USPS TO SHIP MY ITEMS UNLESS OTHERWISE NOTED. PLEASE USE SHIPPING CALCULATOR TO DETERMINE YOUR SHIPPING CHARGES. ALL ITEMS ARE PACKED EXTREMELY WELL. ALWAYS REMEMBER YOUR ITEMS ARE SHIPPED IN A TIMELY MANNER AND I CAN NOT DO ANYTHING ABOUT THE SHIPPING ONCE YOUR ... moreITEMS ARE DROPPED OFF TO THE SHIPPER. IF YOU NEED YOUR ITEMS FASTER PLEASE CONTACT ME AND WE CAN SHIP OVERNIGHT THROUGH THE USPS AT AN EXTRA SHIPPING FEE. ALL ITEMS ARE USUALLY SHIPPED WITHIN 2 BUSINESS DAYS OR SOONER AFTER RECEIVING PAYMENT. MY ITEM DESCRIPTIONS I TRY NOT TO MISS ANYTHING IN MY ITEM DESCRIPTIONS. MY GOAL IN SELLING IS TO LIST ANY AND ALL IMPERFECTIONS(IF ANY) THAT I SEE. I NEVER INTENTIONALLY MISREPRESENT ANY OF MY ITEMS. THAT IS WHY I TRY TO TAKE AS MANY PICTURES AS I CAN. SO IF YOU HAVE ANY QUESTIONS OF CONCERNS ABOUT ANY ITEM PLEASE NO NOT HESITATE TO CONTACT ME THROUGH EBAY. GOOD LUCK AND HAPPY BIDDING! Normal 0 false false false EN-US X-NONE X-NONE
Wilton 450 N Vise 4.5" bullet machinist vise
Here is my recently restored Wilton 450 N machinist bench vise. 4.5" wide jaws. This vise spent its entire life as a resident of the Albany NY High Schools Shop Class(I spent more time scraping gum out of EVERYWHERE as I did wire wheeling it) Excellent jaw inserts. Beautiful shaft, great handle and tight, tight action. Little or no lag in the handle/main screw. I tore this completely down. Degreased and wire wheeled every inch of the vise. Polished all the bare metal surfaces, buffed and waxed to avoid corrosion. Following all that I gave it 4 coats of Hammerite paint(NOT Rustoleum) for a hard beautiful finish. Allowed three weeks for complete curing before I offered this for sale. This is an excellent vise and you will be happy with it. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-147cf0040fe-0x10a-
WILTON 4" Jaw Side Tilt Swivel Angle Vise Model 121079 Made In USA
WILTON 4" Jaw Side Tilt Swivel Angle Vise. Model 121079. Made In USA. Very good condition.Solid,no cracks or repairs. 4' jaw opening. 6-5/8' high. 10' overall length when closed. Vise weights 16 lbs. THIS VISE WAS NOT SAND BLASTED OR REPAINTED,WHAT YOU ARE LOOKING AT ITS JUST CLEAN BARE METAL*
Vintage Wilton C1 Vise 1945
Vintage Wilton C1 Vise 1945 in excellent condition. Opens and closes smooth no cracks or weld marks. Free shipping to the lower 48 states. Returns excepted buyers pays for shipping. Refund will be issued minus the cost of the shipping. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-147d29fddbb-0x10c-
Wilton 5" swivel base machinist vise with copper jaw covers plumber Made in USA
Wilton 5" swivel base machinist vise with copper jaw covers plumber Made in USA
Vintage Wilton Double Jaw Multi-Purpose Swivel Base Bench Vise
This auction is for a Vintage Wilton Double Jaw Multi-Purpose Swivel Base Bench Vise. It is in fair used condition. Has scratches. Dirt/grease, rust, coating/paint loss, and ware throughout. Vise was used. There is no model number or any other numbers on it, not even on the keyway. Base is suppose to swivel, but without it being attached to a solid surface, I could not get to to unscrew to swivel. Vise does have heavy paint loss, flaking, and rust. It does open well. No repairs or cracks that I can see. Jaws are 5" and they open to 5" Vise is VERY heavy, approx 50 lbs. Measures appox 17" x 10" x 6" This is AS IS! What you see is what you get. Please view pics carefully. Please note that I will be away from my items until Aug. 17. I will try to answer what questions I can, otherwise all will be answered on the 17th. ... moreAn oversized shipping fee might be charged for this item. Item will be double boxed due to weight, and will be shipped Standard Post Mail. It will not fit in any flat rate boxes! I do not ship internationally. I do combine shipping when possible. I am not accepting or offering buy it now pricing. I require payment within 3 days, or a claim will be filed with ebay. I also require insurance to be paid by buyer on all standard post mail items reguardless of item cost, and on all priority mail items over $50.00, or else item will not be shipped. I ship to address provided and verified by paypal at the time of payment, so if address differs, item will NOT be shipped. So please make sure your address is current! Please view my other auctions for other vintage items. Feel free to email with questions or for more pics before auction ends. I will not reply to any questions concerning items condition or specifics after auction has ended! Happy Bidding!
Wilton 111146 4" Jaws Swivel Bench Mechanics Vise FREE SHIPPING
Wilton 111146 4" Jaws Swivel Bench Mechanics Vise FREE SHIPPING Within Continental US only. I have many vises. Time to downsize. This Wilton has been disassembled to ship in a USPS Priority Mail box. It will take about a minute to put it back together. I swivels fine. Opens fine and closes tight. It is heavy which is why I use the USPS Priority Flat Rate Box. No returns on this item please. Please ask any questions before buying it. I have sold hundreds of items on eBay and take pride in representing each item accurately as well as shipping in a safe and timely manner. But due to a few bad apples(buyers) who return their broken items(and keep mine) Or expect to use parts from my items to repair their broken items I will no longer accept returns unless otherwise noted! If I am to accept a return I will not reimburse the buyer for the ... moreoriginal S&H. Sorry! Also. Positive feedback will be left only after buyer leaves positive feedback for me. Positive feedback if very important to eBay buyers and to me and will be appreciated! As mentioned, I try to represent the items accurately and price them fairly. So if you appreciate that when you get your purchased item please leave me positive feedback and I will do so for you then! Buy in confidence from a trusted eBay seller with excellent positive feedback! I prefer payment by PayPal. Due to eBay policies. Other forms of payment cannot be discussed but will be accepted. All payments need to clear& post before I ship. Local pickup is free. Thanks and good luck bidding! 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-147d6f4775e-0x10a-
Wilton Vise 48 Pounds
The vise weighs approx 48 pounds and it is 16 inches long 8 inches tall and the jaws measure 4 inches across and opens to 5 1/2 inches. It does show wear as it was used.Some gauge marks. If you have any questions please email me. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-147da0a9893-0x110-
Wilton Model 9400 Bullet Vise 4" Jaw
Wilton bullet vise. Model 9400. Screw Spindle in excellent condition.
Vintage Wilton 450 Metal Machinist Vise Anvil Bullet Model 101162
Vintage Wilton Metal Machinist Vise Anvil Bullet Model 101162 I don't know a lot about tools so please be sure to view all pictures and ask any questions before bidding. This is in great vintage working order. The only flaw is the one bend in bar on the side but it does not effect the operational use of the tool that I am aware. it is shown in pictures. I have been an eBay seller for many years. My auctions consist of used items unless otherwise stated. I will always do my best to describe my items in detail and mention any flaws. If you have questions please message before bidding. Shipping: I ship only within the continental United States. Shipping prices are based on weight and location. Unless the auction is a free shipping auction. All breakable items are shipped insured. I charge only what the post office charges me to ship items ... moreso please wait for the invoice before paying. If you pay before invoice and you paid more in shipping than the actual cost you will find a refund for the extra in your Paypal. Shipping on pottery and glass may seem a bit higher because I use priority shipping for these things. The less time in transit for these items the better. Video Games: I list many vintage video games. Unless otherwise stated. Video game auctions are for cartridge only. While I have played and tested them all, some have set in a box for a while. It is possible that they will need cleaned again upon arrival. I have a kit I use, but it can be done just as easily using a q-tip and rubbing alcohol. Please bid in confidence and I know that I am always available if there are questions or if by chance there would be a problem with a transaction. My goal is 100% buyer satisfaction!
Vintage Wilton Bullet Vise With Power Arm
Estate sale find. Up for auction is this vintage Wilton bullet vise with power arm. It looks to be in good used condition. I didn't notice any damage. The vise has this number 9300 and the power are base has what looks like number 301.1. Each Item has some info and you can see the pictures. Please take a close look at all the pictures. This is being sold as found and untested. I only have what's pictured. All sales final no refunds. Good Luck. Please email me early if you have any questions. pay pal. Buyer pays $55.00 shipping. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-147e1acc199-0x114-
WILTON 5" JAW HEAVY DUTY BENCH VISE W/ SWIVEL BASE
Wilton Heavy Duty Bench Vise w/ Swivel Base Model 845 Serial No. 110850 Jaws Measure 5" x 7/8" Max Opening 6" Swivel Base Measures 6" x 7" No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced ... moreby us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
B & G 500V woodworking bench front vise woodworkers clamp WILTON Columbian
B& G 500V woodworking bench front vise woodworkers clamp WILTON Columbian This sale is for ONE(1) Reconditioned/ Refurbished woodworking vise. It is a Brodhead and Garrett brand vise made in the U.S.A. The vise jaws measure 7" x 4" and have a maximum opening of 9" The vise weighs 30 pounds. The overall size is approximately 19" x 10" x 6" This vise has been disassembled and stripped of any paint. Varnishes, glues etc. It was then glass beaded to remove any residual paints or surface rust. All of the castings have been repainted in a satin black enamel. The drive screw and guide rods are bare metal. Because of the age of this vise there could be some minor pitting in the rods, almost not worth mentioning. It was reassembled and tested. The vise opens and closes freely. I would rate this vise as very good to ... moreexcellent and as close to new as one would expect for a used vise. gsrx_vers_577(GS 6.7.5(577)
WILTON USA 6½" WOODWORKING VISE Bench Clamp Work Holding Metal Jaw Dog
Vintage Wilton Woodworking Vise. Made in the USA 6½" jaw width. 3" jaw depth, 7" opening 9" long wood handle is removable Appears to be an under-bench mount Features friction fit. Spring-less vise dog Vise dog measures 3/4"x3/4"x3/8" Approximate overall dimensions: 13" long. 6½" wide, 4" tall Vise weighs 8 lb. 14 oz Don't know vise model number. Jaws& handle tee have different numbers. Shipped with handle separated from vise Multiple shipping options available Questions and comments are welcome. Item packed carefully and shipped promptly. Payment required within 2 days of purchase. Thanks and have a wonderful day!
Wilton Shop King Swivel Base Vise Part w/ Hardware.
For sale is the swivel base and mounting hardware for a Wilton Shop King Vise. The base is 3 7/8" in diameter a the top. Part number on the bottom is 13-633. The shop king it came from has 3" wide jaws Click on pictures to enlarge for more details Shipping is USPS Priority Mail to the USA Missouri Residents must pay 8.35% sales tax
Vintage Wilton Vise no. 121101 3 1/2" jaws plus pipe jaws - works great
Vintage Wilton Vise No 121101. 3 1/2" jaws plus pipe jaws. Good working condition. Swivel adjustment. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-147e5eef146-0x106-
NICE WILTON USA 1203 WOOD WOODWORKING VISE BENCH SHOP TOOL WORK HOLDING
UP FOR YOUR CONSIDERATION IS: NICE WILTON USA#1203 WOOD WOODWORKING VISE BENCH SHOP TOOL WORK HOLDING. PURCHASED AT AN ESTATE SALE. NICE CLEAN UNIT. OPENS AND SECURES PROPERLY. JAWS 6-1/2" WIDE AND OPENS TO APPROXIMATELY 5-1/2" WOOD INSERTS ADDED BY PREVIOUS OWNER. NO ID ENGRAVING. SOLD AS IS" REVIEW PICTURES FOR DETAILS. PLEASE TAKE A MOMENT TO BROWSE MY E-BAY STORE FOR ADDITIONAL UNIQUE ITEMS. Powered by The free listing tool. List your items fast and easy and manage your active items.
Palmgren Machinists Vise Base No.12 Wilton Craftsman & Others, Excellent!
This is a Palmgren No. 12 machinists vise base in outstanding condition! This vise base or holder locks your machinists vise tight by simply moving the lever. The attachment piece for the vise measures 1 3/4" X 2" and is spring loaded. This base works on other machinists vises though I don't know them all. This Palmgren base shows very little use and no abuse. There are no milling marks. No dings or dents, and all of the adjustments work as they should, nice and smooth. Please view the images closely and use the zoom feature. They can provide more detail than I can here. Please s ee my other listings for outstanding tools and vintage estate items. I always combine shipping to save you money. I will ship worldwide and shipping to the US will be priority mail. International bidders. This base weighs about 3 pounds packed and I ... moreship to your preference.
Vintage Wilton No 645 Vise Schiller Park USA Made Vise Great Anvil !
This is a Buy it Now for a vintage Quality and not beat up Wilton Vise It is a 5 In. model and has an excellent anvil plate and horn The anvil plate is 3 x 4 In. which is large This is a chance to get a nice Made in USA Cast Iron Vise The new wiltons are made in China Please Look at All the Pictures to determine Condition. I try to describe items as best I can. I also try to take enough pictures so you can see how it actually looks. Please Look at all the pictures Please E Mail Me with any questions or concerns about this item. My Goal is to represent Items factually so My Customer can make an informed decision on a purchase. If You are unsure about an item ask questions. If You do not know what You are looking at as far as a genuine item. As well as described. Please do not purchase from Me. I mostly sell one of a kind or hard to find items ... moreas well as restored ones.
Vintage Bench Vise Wilton USA 4" Anvil Woodworking Metal Work Tool Swivel Base
Vintage Bench Vise Wilton USA 4" Anvil Woodworking Metal Work Tool Swivel Base. Good pre-owned condition. Works well. Please see and USE all pictures for the best description. Thanks for looking! Please see my store for all kinds of vintage and unique items. Something for everyone. MY Standard Shipping is for the lower 48 ONLY Priority(East Coast) or Fed Ex(West Coast No P.0. Boxes! Both with Tracking and Insurance. Items: All items I like to call treasures. I go in search of these items at any sale I can find. All items are used, pre-owned, pre-loved, or pre-USED, and I am NOT an expert on anything I sell. I try to describe all items as accurately and honestly as possible, HOWEVER PICTURES ARE THE BEST PART OF THE DESCRIPTION. My idea of great may be different than yours, so PLEASE use all pictures as the best part of the description. ... moreDue to the fact that all these items are vintage and or pre-owned they are AS IS. Most items will need a detail cleaning. I wipe all items down. But leave the fine cleaning to you. Shipping: I do my best to calculate the correct shipping cost. I do combine shipping. And will figure the exact cost to ship the items to you. If you are overcharged more than $1.00 I will refund the difference. I will send you an invoice with the correct amount. I ship almost daily, and mail by 1 pm. I do my best to send your purchase 1 day after payment. Payments: I accept PAYPAL. Other payment forms may be accepted. Please e-mail first. All payments must be made in within 5 days of auction ending, or just let me know. I am easy to work with. I use EBAY Unpaid manager after 5 days. Feedback: I am an honest seller. Try to describe every item best as I can. If you are not completely satisfied PLEASE contact me prior to leaving feedback. I am easy to work with, I will make things right. I work hard to make sure your experience is a GREAT one, if for some reason it is not please just e-mail me! I will leave POSITIVE feedback, when you pay. I strive for EXCELLENT CUSTOMER SERVICE, and will p
Vintage TORCO Bench 4" Vise / Swivel Base Pipe Clamp Made By WILTON CHICAGO USA
This is a rare Vintage TORCO Bench 4" Vise With Pipe Grips/ Swivel base. Made By WILTON CHICAGO USA. Its in nice condition. Has some wear,but that's expected A great collectable. Please see all photos. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-147ec33da1e-0x10f-
WILTON NO. 3 3/4 BENCH VISE MADE IN U.S.A. WITH 4 INCH JAWS
UPFOR AUCTION IS THIS WILTON NO. 3 3/4 ADJUSTABLE BENCH VISE/ ANVIL WITH 4 INCH JAWS MADE IN THE GOOD OLD U.S.A. WILL SHIP ANYWHERE IN THE USA $13.00 PRIORITY BID WITH CONFIDENCE-JUST CHECK MY FEEDBACK THANKS AND HAPPY BIDDING.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-147ee43aba7-0x114-
Wilton Early PowRarm Adjustable Holder with Special Vise
An early Wilton bench vise offering. Production dates unknown. The"PowRarm" base appears to be the forerunner of the later more versatile models. This one locks by rotating the lower collar and is specifically designed to hold the aluminum framed vise affixed. Everything shows signs of age, like missing paint, but there are very few signs of use. The 2-1/4in wide smooth faced steel jaws are unscarred. No reserve.
WILTON BULLET VISE MODEL 8400
RIMCO ROBERT IVENS MACHINERY COMPANY 613 W. Bruce St. Milwaukee WI 53204 414-272-6686 Welcome to Robert Ivens Machinery Company Our Mission: Productive and Satisfied Customers. Up for AUCTION: WILTON BULLET VISE MODEL 8400 In used condition No bends. Cracks, or other related damage Vise is about 45lbs Swivel base Jaws are 4" wide max opening about 6-7" Jaws are in nice shape and with cleaning this could be a real looker! Nice piece for use or to add to the collection! Check photos for details Email us with any questions! WE COMBINE SHIPPING! Check out my! Be sure to add me to your! Robert Ivens Machinery Company(RIMCO) is Wisconsin's largest dealer in used woodworking machinery A sole proprietorship in business for more than twenty-five years, RIMCO's business philosophy is based upon value and customer satisfaction. If ... moreyou have an interest in woodworking machinery. You are welcome to call and ask about our extensive. Ever changing inventory. Your business will be most appreciated.
LOWER PRICE!! - WILTON WOODWORKING VISE 7" JAW wood working clamp
plenty of wear on it. But a very good vice with quick open feature. note broken tab at mounting bolt hole. with a big washer it should still bolt up tightly. I don't know much about them except that I was told by an experienced woodworker that Wilton is the y best. as-is, where-is, exactly as it is in the pics. btw, are you building a high-end workbench? Then please check this out. Build that $1000 workbench for a fraction of the cost from the big retailers. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-147f24bb3f5-0x10a-
Snap On Extreme Green 1750 Swivel Combination Bench Vise 5" Jaws Wilton bullet
Full specs at the bottom of listing. Undoubtedly there's an awful lot of Snap On Extreme Green fans out there so I see no reason why you guys can't have a Snap On vise in your favorite color. We all know that Snap On never released a vise in this color but I had a red one come my way that needed refinishing so here we are. To the best of my knowledge this is the first Snap On vise painted this color. I don't think it's any secret that Wilton manufactured these vises for Snap On and that's a good thing because Wilton makes some of the world's best vises. This is a very nice 46.6 pound vise with 5" jaws in outstanding condition. Action is terrific. One finger liquid smooth. The jaws are all in good shape and the surfaces meet up parallel with even clamping power. There is a small nick on the bottom corner of one ... morejaw but it's out of the way and won't cause you any problems. There's no structural damage, welds or repairs. The anvil area shows a few working marks but it's pretty nice actually. Nothing bad to say about it and you're going to love your new vise, I guarantee it. I'll tell you a bit about the restoration now if you care to read. It's a fairly basic method. After a warm. Soapy scrub bath the paint is stripped with aviation gel and final cleanup takes place with a quick media blast. I prep the cast iron surfaces for paint and then warm them to 200 degrees. Then 3 coats of enamel are sprayed, each one being baked on at the same 200 ° for 30 minutes. All of the steel hardware is cleaned to look as good as it can. New rubber finger saver washers installed, synthetic grease is applied to the moving parts and then back together it goes. The Snap On badges were worn beyond repair so I chose a set of decals which I thought to be a good fit. The finished product is a gorgeous vise that works even better than it looks. NOTE: The paint is not from Snap On but I matched the color as closely as I could. It may not be exact but it will be very close. My under
Wilton Triple Duty QUICK RELEASE Swivel Bench Vise - 3-1/2" w/Pipe Jaw - RARE!
Very cool made in the USA. Wilton brand"triple duty" swiveling bench vise with 3-1/2" jaws and pipe jaw. This is a QUICK RELEASE vise; if you give the handle a turn counter-clockwise, the slide will slacken and allow you to adjust the vise outward as you wish. A few turns in and the vise is as strong and adjusts like any other. VERY COOL FEATURE! The vise is in great original condition, just came out of an old barn. I cleaned it inside and out with some oil and a rag but wanted to keep the original paint and patina, so I didn't hit it with any hares solvents or brushes. Looks like one of the jaws may have been replaced at some time as it is a tad bit larger but both jaws are in good, useable condition. Base swivels and locks into place as it should. Slide adjusts out to approximately 4" Please let me know if you have ... moreany other questions.
VINTAGE 3 1/2'' WILTON VISE - MACHINISTS - BLACKSMITH - SWIVEL BASE NICE NO RES
Offering a used Wilton 3 1/2' vise. It is in very good used condition as I hope the pictures show. It has the pipe jaws and removable upper jaws. And moves in and out smoothly. The upper jaws are in fine condition. There is one small ding in the anvil flat area. US made and has the adjustable base. Please e-mail with any questions. Shipping will be US priority mail $ 17.00 to the winning bidder.
Vintage Antique Wilton C Clamps Bench Vise Woodworking Carpentry Welding
This auction is for one pair of vintage Wilton C-Clamps model 406. Keywords: Chas Parker Prentiss Yost Columbian Athol LS Starrett Reed Holland Vise Vice Workbench Work Bench Shop Tool Old. Terms and fine print If you have any questions we are happy to help. Please ask 24 hours prior to auction end time. We do entertain reasonable offers on all items. Please do your own research to be sure item is correct for your application or use- Buying as is used condition. Any winning bid must pay within 3 days from the time of purchase. We do not deal with second chance offers thanks to past scams. We make every attempt to ship within 2 days once item is paid for and we accept Paypal for payment. Shipping charges are for economy shipping unless otherwise stated and these prices are for destinations inside the USA. We are not responsible for any items ... moredamaged in shipping via USPS. UPS, FedEx or otherwise so please state if you would like insurance and wait for invoice before you pay. We combine shipping whenever possible. We do ship to some international locations but anyone outside of the USA must ask for shipping cost estimate prior to bidding. A ny item shipped outside of the USA will have an additional charge depending on location and country of destination. Please provide your township and country in the message so we can confirm we ship to that location. Thank you. And good luck bidding!
WILTON 654 4 INCH VISE MADE IN USA 031 037 EXCELLENT CONDITION
Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge WILTON 654 4 INCH VISE MADE IN USA 031 037 EXCELLENT CONDITION VENERABLE WILTON QUALITY VISE! AMERICAN MADE PRODUCT WE MAKE TOP SHELF STUFF(SHAME WE DON'T MAKE MORE) WILTON 654* ORIGINAL VERY GOOD CONDITION* CHUNK OF QUALITY METAL* TRUSTED VENDOR* HARD TO FIND PARTS! This LISTING FEATURES a wilton 654 four inch bench vise.Piece in EXCELLENT SHAPE. Jaws are smooth. SOLID AMERICAN MADE VISE. SEMI RARE BID TODAY. Great opportunity to own one of these POPULAR Vises. YOU WILL NOT NEED ANOTHER If you treat this one WELL. GREAT HARD TO FIND VISE BID NOW! FREE SHIPPING TO MOST USA DESTINATIONS: International buyers BUY WITH confidence we have shipped all over the WORLD for many years we WILL get product to you ... moreUNDAMAGED. And you will NOT pay ruinous duty fees. We are NOT going to waste our time OR YOURS with a substandard product this IS NOT THE VENUE for something that is not in excellent condition. We believe these to be QUALITY ITEMS if we did not THEY WOULD NOT BE HERE. What you see in the pictures is what you will receive. Great item here own it for a fraction of retail cost today. NO RESERVE + FREE SHIPPING= BIG SAVINGS. We are a family owned and operated pawnshop in Hendersonville. North Carolina. We have enjoyed a great reputation locally for two generations. Trusted Ebay sellers since the sites inception,our feedback speaks for itself. We intend to keep it that way. Give us a try YOU WILL NOT REGRET IT. Save some real money today. We buy and sell most anything you can imagine. Check back often as inventory changes daily. Be sure to check out our other auctions! If you need live help with this or any of our auctions. Please do not hesitate to email us or GIVE US A CALL 828-693-0717 10am=6pm EST and ask for Bryan. Thanks for checking us out! UPS Ground Lower 48 USA Complimentary. ITEMS WILL SHIP NEXT BUSINESS DAY IN MOST CASES. LIMITED I
Baby Palmgren Tilt Angle Vise No. X1 1-1/2" Jaws w/Rare Bench Mount Not Wilton
Vintage Baby Palmgren Tilt-Angle Vise No. X1 1-1/2" Jaws with Rare Bench Mount click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge click picture to enlarge Description Fresh from a long-time collector's treasure trove. a very nice baby Palmgren tilt-angle vise No. X1. I don't believe Palmgren made a tilt vise any smaller than this cute little No. X1. The jaws open smoothly to 1-1/2" This one has the removable. Grooved jaw faces that show some wear. I did plane the top surface to show the potential. There are no drill marks, but the side surfaces show some hack saw marks. The worst small cut does make it ... morehard to see the tilt degree indicator. The body shows portions of its original dark-blue paint.as readily seen in photo#5. The bench mount was made specifically for this vise. It is marked: PALMGREN 15-C(see the final 2 photos) The body of the mount is aluminum and the screw unit is steel. The mount opening has a 2" maximum spread. This mount is unpainted and in exceptional condition. Condition: Very clean condition. Please read narrative above for additional details and view photos for insight on condition. SHIPPING: Well packaged. Shipping will be via USPS Parcel Select Mail or Priority Mail with a shipping weight of 5-pounds. I can combine items to save you money on shipping. But keep in mind that I cannot ship a glass vase and a bowling ball in the same box. I strive for your 5-star feedback rating. My goal is to offer excellent service. Accurate descriptions and honest business practices. I offer unique and hard-to-find items at a great value combined with an enjoyable and seemingly effortless shopping experience. BID WITH CONFIDENCE! for more great items! Payment I prefer payment via PAYPA L within 3 days. Please.BUT. You may check with me for other allowable options