|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States Round Vise Jaw Width: 3-1/8" (79mm). Round Vise Jaw Depth: 13/16" (20.5mm). Rotary Tables Tilting 4″ (100 mm):-. Round Vise Jaw Opening: 1-9/16" (40mm). ... moreROUND VISE 4"(100mm) SPECIFICATION :-. Round Vise Height: 1-1/4" (33mm).
Buy It Now
$10.99 Shipping Condition: Used Location: Cleveland, United States This is a fixed auction for up to 2 Brand New Enerpac Cylinders. Model: RWR-11 Cylinder Capacity: 2.000 Lbs straight pull@ Max PSI 1.19" Stroke. ... more0.50 clamping) Cyl. Effect. Area: 0.67 Sq.In. Pull. 1.32 Sq.In. Push Retracted Height 6.13" Clamped Height: 4.38" Cylinder Bore: 1.19" Right hand arm swing, Operating Pressure 150-3000 PSI Maximum Frequency: 30 Cycles/ Min Notice: Each bid is for 1 cylinder. This item is brand ne w in its original packaging and is fully guaranteed. Shipping in the continental US is $9.90. ~ International bidders are always welcome ~- We always combine shipping to give you the lowest cost. Contact us with any questions at 1-800-826-3433(9-5pm Est) Please visit our other listings on eBay!
Buy It Now
$7.75 Shipping Condition: New Location: Huntington Beach, United States Precision ground & hand inspected. Our part # TEC-04544IS.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Fitment： For Finishing Milling Machines, Drilling Machines, And Precision Parts. Description： -Type: Bench Vise -Jaw Height: 1.6" / 4 cm -Jaw Width: 5" ... more/ 12.5 cm -Jaw Opening: 5" / 12.5 cm -Max Clamping Force: 24 kN -Jaw Material: 45# Steel -Body Material: HT250 Gray Cast Iron -Wrench Material: QT500 Ductile Iron -Vise Height: 4.3" / 11 cm -Net Weight: 39 lbs / 18 kg -Package Dimensions (L x W x H): 17" x 11" x 6" / 42 x 28 x 14 cm Features & Details：.
Buy It Now
Free Shipping Condition: New Location: Milwaukee, United States Global Industrial Bench Yoke Vise, 1/8", 4" Pipe Capacity.
Buy It Now
$3.50 Shipping Condition: New Location: China Product series: SO series Product material: High quality H13 steel Processing scope: Carbon steel (various alloys such as 45 steel, 1810 steel, alloy ... moresteel, stainless steel, cast iron, heat-resistant alloys, etc.) Product features: Large space for chip storage, smooth chip removal, exquisite blade edge, and convenient installation Applicable scenarios: Can process irregular surfaces, concave convex surfaces, inclined surfaces, boring holes, cross holes.
Buy It Now
$5.00 Shipping Condition: New Location: Chino, United States 1 x 5 Axis precision milling vise part stop. ➤ 5 Axis precision milling vise part stop. ➤ High precision table mounted part locator stop. Mounting bolt ... moresize: 1/2"-12 thread. ➤ Could be made to fit bridgeport machines using 3/8" studs, but will require your bolt, washer and t-nut.
Buy It Now
$2.50 Shipping Condition: New Location: Summerfield, United States ER 20 Collet. Material 65MN Steel.
Buy It Now
$14.05 Shipping Condition: New – Open box Location: Mount Sterling, United States More Information. What's Next?. Manufactured by UNKNOWN. 59557-J138 V-Block. The product images shown are for illustration purposes only and may not be ... morean exact representation of the product you will receive.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States NUMBER OF Items 6(one of each) R8 Round Smooth Collet sizes 2 each of 1/2. 5/16, 3/4, 3/16 Only One 1/2 size collet has"Hardinge" Printed on ... moreit Up date 5/8 is now gone System of Measurement Inch Name which size you want Each New List Price: $40.00+ USD Picture above is a stock photo
Buy It Now
Free Shipping Condition: New Location: Klamath Falls, United States For light machining of thin walled or plastic parts where only minimal pressure is necessary.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States Multi-Purpose VISE. Vise capacity Pipe jaw capacity Jaw (Replaceable) Heavy Duty Cast Steel. 360 º Rotation w/Lock. 2-1/2 " x 1-7/8".
Buy It Now
$16.00 Shipping Condition: New Location: Schaumburg, United States 1-2-3 Block Set and 6" x 3" High Jaw for 6" Kurt or any Similar Milling Vise. ● The 6" x 3" High Jaw is suitable for 6" Kurt or any other similar milling ... morevise. ● Both 1-2-3 Block and Vise Jaw are made of High Grade Alloy Steel, Hardened to RC58-62.
Buy It Now
Free Shipping Condition: Used Location: Plano, United States
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description 3-Inch Bench Clamp Vise w/ Swivel Base This 3-inch bench clamp vise is an essential tool for fitters. Our clamping vise has a powerful clamping ... moreforce and can fix workpieces very securely. This ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. Features & Details.
Buy It Now
Free Shipping Condition: New Location: China Lathe swing ： 120-220mm. (Aa is made of steel,Eb is made of stainless steel). Adjustable turning tool height ： 12mm. That only the model Aa PLUS includes ... more7 tool holders, other models only include 4 tool holders.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1 x 5 Axis precision milling vise part stop. 5 Axis precision milling vise part stop. High precision table mounted part locator stop. Mounting bolt size:1/2"-12 ... morethread. Could be made to fit bridgeport machines using 3/8" studs, but will require your bolt, washer and t-nut.
Buy It Now
$18.40 Shipping Condition: Used Location: Carrollton, United States
Buy It Now
$80.27 Shipping Condition: Used Location: Cincinnati, United States BRIDGEPORT VISE 6" WIDE JAW 5" JAW OPENING NICE& SMOOTH OPERATION REMOVABLE HANDLE APPROX 65 LBS NO DRILL HOLES Any questions please email ... moreor feel free to call Delaney's Surplus at 608-643-8009. Closed Tuesdays and Wednesdays.
Buy It Now
$56.51 Shipping Condition: New Location: Chino, United States Why should you buy from us? We exceed Ebay's standards for quality and service. We are an Ebay Star Seller and have over 16.000 unbiased positive ... morefeedback from unique Ebay buyers. Get It Quick! We ship 97% of all in-stock orders within 1 business day! AIR. POWER& HAND TOOLS CUTTING& CARBIDE TOOLS MACHINE TOOL ACCESSORIES MRO& SHOP SUPPLIES PRECISION MEASURING TOOLS Thank you for shopping with us! Description Shipping Payment Return Policy Our products carry a one year warranty and combined shipping is available. Please see the shipping tab for more information. 4" Heavy Duty Cross Slide Vise with Metric Dial Suitable for clamping soft materials such as aluminum. Copper, etc. Secures firmly on drill press table and moves similar to a vertical mill. Accurate positioning in two directions(crossed) Each dial is graduated in.1mm increments for precise adjustments and easily adjusts to 0. Ball crank handles are solid and balanced. Feed screws have precision cut acme threads. High grade cast body. Heat treated steel jaws. Handles are clear from the mill table. Base has an 8" X 5" bolt pattern which is 3.5" center to center and across. Height is 6" Jaw depth is 1-7/16" Cross travel and jaw width are 4" Jaw opening is 3.8" Longitudinal travel is 6" Weight is 21 lbs. Combined Shipping Available- Please add the items you would like to purchase to your shopping cart. Then click on your shopping cart in the upper right hand corner. To the left of our name(hhindt) there is a Request total from seller button. Click that and we will send you a combined invoice. You can make your payment once you receive the invoice in your email. For freight shipments. Please contact us with your complete delivery address including the zip code for an accurate quote prior to your purchase. PayPal is preferred for immediate shipping. We also accept major credit cards including Master Card. Visa, Discover and American Express. To pay with a credit card without using Paypal. Please contac
Buy It Now
$231.13 Shipping Condition: New Location: Hamden, United States GS675 Precision Milling Machine Vise. GS675 6.0" 7.5" 1.77" 17.2" 9.13" 4.6" 12.0" 1.65". 39" 327-725M. Precision Milling Machine Vises. 4 jaw plate positions ... moreallow extra capacity with the jaw plates in the outside position.
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States Ball Shape. Double Cut. You may ask for freight cost before buying tools. Product features.
Buy It Now
Free Shipping Condition: For parts or not working Location: Wilkes Barre, United States THIS VISE APPEARS TO FUNCTION AS INTENDED BUT IT IS SOLD AS IS AS PICTURED. SHOWS SIGNS OF HEAVY WEAR INCLUDING GRIND MARKS GOUGES NECKS SOLD AS IS FOR ... moreDISPLAY.
Buy It Now
$37.02 Shipping Condition: New Location: Saint Charles, United States SHARS Fully Machined Chuck Plate 12" D1-6 For 3 and 4 Jaw Self Centering Chucks NEW! The size of back plates's D1 should be a little bit smaller than ... morethe size of Chuck's D1. Because the gap between back plate and chuck is smaller, chuck's TIR is better.
Buy It Now
$55.99 Shipping Condition: New Location: China Clamping range:5-58mm. Clamping range:Soft jaws can be installed. Clamping range:5-100mm. Clamping range:soft jaws can be installed.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications: Material: SUS440 Hardness: HCR 45°-55° Parallelism: 0.003/100 mm Squareness: 0.005/100 mm Clamping range: 0-50mm（2 inch） Features： 1.The ... morematerial is processed by the vacuum head and returned to zero, which is reliable and free from deformation. 2.Sliding fixed design for small workpieces 3.Special structural design with high precision 4.Corrosion resistant, wear resistant Features： 1.The material is processed by the vacuum head and returned to zero, which is reliable and free from deformation. 2.Sliding fixed design for small workpieces 3.Special structural design with high precision 4.Corrosion resistant, wear resistant.
Buy It Now
Free Shipping Condition: New Location: China Maximum tightening: 65mm. Hardness ：58-62 HRC.
Buy It Now
$73.29 Shipping Condition: New – Open box Location: West Jordan, United States PHASE II 5C COLLET 57 PC LOT See Details!Theses are new old stock. I started separating them to determine if they are a complete set but I didn’t want ... moreto open all of them. As I was going thru them I did not see any the same size. That being said I can not confirm that. There is 57 pieces as stated on box. It also states it’s sizes 1/8- 1 1/64 but cannot confirm that. These are being sold as is.
Buy It Now
Free Shipping Condition: New Location: United States Vertical Handle Hold Down Clamp, Base Mounting Style Flange, Handle Orientation Vertical, Holding Capacity - Maximum 2,750 lbf, Arm Style Solid Bar, Tip ... moreMaterial Not Applicable, Clamp Arm Opening Angle 147 Degrees, Arm Length 5 in, Height Under Arm 2.73 in, Includes Locking Handle No, Accommodates Workpiece Variation No, Application Assembly, Checking Fixtures, Clamping, Welding, Body Material Forged Steel, Mounting Holes Center to Center - Long Side 2.75 in.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1X Wire CNC Self-centering Vise Electrode Fixture Machining Tool 8-55 50-75mm. 1X CNC Vise. Size: 75mm 54mm 44mm. Size 75mm 54mm 44mm. Opening distance: ... more(8-55 mm) (50 mm-75 mm). Long service life.
Buy It Now
Free Shipping Condition: New Location: Richmond, United States Drill press vise with stationary base and 6" nominal jaw width provides clamping action for heavy-duty drilling applications. Stationary base creates ... morea firm foundation when mounted to a drill press bench.
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States Made from alloy spring steel and hardened to HRC 44-48. at Fixed Prices. Runout is. 0003". You may ask for freight cost before buying tools. (this is ... morea set you can not choose different sizes).
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States SHARS 40 NMTB 3JT Taper Adapter NEW Product Code 202-5720 Product description Taper: 40 Chuck Taper: 3JT Thread: 5/8"11 SHIPPING: UPS Ground Buyer ... morepays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via USPS. Canada will pay actual shipping costs plus duty fees via USPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. PAYMENT: We accept VISA. Master, Discover and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools. Feel free to email us at our eBay Message Box.
Buy It Now
Free Shipping Condition: New Location: Walnut, United States 1 x Bench Vise. Pot Lid Holder Solid Color Sturdy 3 Colors Stable Cutting Board Rack Ultra-light. It is suitable for woodworking carving, drill hole, ... moresmall object grinding, etc. Laundry Bag Anti-aging Durable Multi-size Travel Laundry Bag Multi-purpo 30x40cm.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot Nuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers. ... moreOther Applicable Chucks - Samchully, Auto Strong, MMK, Nikko, Howa, Sugo.
Buy It Now
Condition: Used Location: Wilmette, United States This is a very good condition heavy duty machining vise. Moves smoothly and well. The item is used and has blemishing, etchings and markings, and worn ... morepaint. Nothing that impacts the integrity of the tool.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Milling Machine Worktable Mini Multifunction Drill Vise Fixture For Bench Drill Description： The table applies to mini bench drill and drill bracket series. ... moreIt can also be applied to other suitable machine. The bench is made up of several adjustable dovetail aluminum alloy, We can guarantee a minimum of space and to ensure accuracy. Specifications: Material: Aluminium Alloy Size: 310 * 90mm * 80mm X-Route: 200mm Y-Route: 50mm Distance of grooves: 34mm T-slot size: standard size slot is 15X8X6mm Scale travel: 1.25mm (circle), 0.05mm (one cell) Packing List： 1 * Worktable.
Buy It Now
$25.75 Shipping Condition: Used Location: Vincentown, United States Michigan Industrial Tools 6" Drill Press Vise MIT 6" DRILL PRESS VISE features: Durable Cast Iron Construction Powerful. Replaceable Serrated ... moreSteel Jaws Provide Maximum Clamping and Holding Power Chrome Plated. Cold Rolled Steel Screws Slotted Base Positions Easily on Drill Press Table or Workbenches Chrome Plated Swivel Crank Handle Drops Out of Way Conveniently, About Us | Shipping | Warranty | Returns | Payment | Contact Us Welcome to TOOL AMERICA. Your full service tool distributor. We offer some of the HIGHEST QUALITY tools available. We are professional tool merchants with many years experience in the business. Please compare our products and super customer service. After all, IF YOU ARE GOING TO BUY. WHY NOT BUY FROM THE EXPERTS? You'll be glad you did! If you have any technical questions about this product. We encourage you to give us a call. For more information call TOLL FREE 1-888-535-8665. We strive to ship your item within 24 to 48 hours. Once your item ships. We provide a tracking number via e-mail. All shipping options utilize a mix of reliable carriers to ensure your order is delivered in a secure and timely manner. After the order is placed. The system automatically selects the most efficient shipping method based on destination, size, and weight. These carriers include, but are not limited to; UPS, FedEx, FedEx SmartPost, The US Post Office, Ontrac, BluePackage, Prestige and Lasership. Please be advised that"time in transit" does not include the day the order is picked up. Business Days" do not include Saturdays, Sundays or major Holidays. To ensure quick delivery. Please give us both your physical address as well as your PO Box(if applicable) Why do you need my phone number? Don't worry we request your phone number in case we may need to call you about a problem with your address or item. Also most of our shippers want to know your phone number just in case the driver has a problem finding your address or the item gets lost. Everything we carry comes with at lea
Buy It Now
Free Shipping Condition: New – Open box Location: Louisville, United States Description Hardinge S16 Collet Pad 1/2" Round Smooth Payment Payment must be made within 3 days of purchase. To pay by Visa/MC please call 973-610-2326. ... moreTerms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools and metalworking equipment. precision inspection equipment. testing and measurement equipment. construction equipment.and more. We are committed to 5-star service. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions.
Buy It Now
Free Shipping Condition: New Location: Chino, United States This2 Way Clamp Vise Is an Essential Tool for Fitters. Our Clamping Vise Has Powerful Clamping Force and Can Fix Workpieces Very Securely. This Ensures ... morethe Stationarity and Stability of Workpieces so They Won't Move Even Slightly As Much Force Has Been Applied by the Fitter.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Package Contents: 1 x 5 Axis precision milling vise part stop Technical Specifications: Color: Red Material: 6061 aluminum Mounting bolt size: 1/2"-12 ... morethread. Features and Benefits: ➤ 5 Axis precision milling vise part stop ➤ Anodized red and gold (see all pictures for details) ➤ High precision table mounted part locator stop. ➤ Main body is solid one piece, NOT two halves bolted together. ➤ Could be made to fit bridgeport machines using 3/8" studs, but will require your bolt, washer and t-nut. ➤ No upper handle to get in the way of cutters or coming loose from chips grabbing. ➤ Heat treated steel pivots and t-nut.
Buy It Now
Free Shipping Condition: New Location: Portland, United States TITAN 22013 -. Jaw width: 5". Jaw opening: 5". Swivel base with position lock. Incorporated anvil.
Buy It Now
$18.40 Shipping Condition: Used Location: Doylestown, United States Oxy Acetylene Gas Cylinders Gas Cyclinder Cart Gas Regulators Like 6 torch Spark Strikers 4 tube of brazing rod 4 reels of Mig wire All is older stuff ... moresitting in garage many years. I dont' have details. If you can't tell from photo's please come here and inspect in person. Spare me crazy little questions. If you are interested then just come over and look at it yourself. Thanks for understanding. Come and pick it up. Pay with the green stuff on pickup. Prefer to avoid the electronic payment scams. That means show up with the money cashola and take the stuff home, old fashioned like. No shipping. I'm not far from I-84 and NYS Thruway I-87(near Newburgh& Poughkeepsie) Will help you load your pickup truck.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality ... morecast iron, while the jaws are made of carbon steel. The top and bottom cross slide vise with bi-directional movement allows easy machining of high precision and quality wood and metal parts. Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Chino, United States HRC58 ° Wire CNC Self-centering Vise Electrode Fixture Machining Tool 40Nm Opening distance: 50-75mm Description: A new self centering vise, the claw ... morecan be disassembled and replaced separately, with high hardness and good wear resistance, which is suitable for electrode processing and mechanical parts processing. Specifications: Claw material: stainless steel（440C） Hardness：HRC58 ° Repeat positioning accuracy: 0.03mm Maximum screw torque: 40Nm Opening distance: (8-55 mm) (50 mm-75 mm) Application: holding different sizes of work center unchanged Weights&Dimensions: Weight: 1.1kg Size: 75mm * 54mm * 44mm Features&Highlights: 1.Strong versatility 2.High stability 3.Long service life 4.Large clamping range and high clamping strength Package Included: 1X CNC Vise.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification: Claw material: stainless steel（440C） Hardness：HRC58 ° Repeat positioning accuracy: 0.03mm Maximum screw torque: 40Nm Opening distance: ... more(8-55 mm) (50 mm-75 mm) Weight: 1.1kg Size: 75mm * 54mm * 44mm Application: holding different sizes of work center unchanged Features: 1.Strong versatility 2.High stability 3.Long service life 4.Large clamping range and high clamping strength Package Included: 1X CNC Vise.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 2-Axis Milling Machine Worktable Cross Sliding Bench Drill Vise Fixture Table US. 1 Worktable. The table applies to mini bench drill and drill bracket ... moreseries. Material: Aluminium Alloy. The bench is made up of several adjustable dovetail aluminum alloy.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Application The table is not only suitable for miniature table drill and drill stand series, but also other suitable machine tools. Specification Material: ... moreAluminium Alloy Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell) Package Included 1*Milling Machine Table.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1X Wire CNC Self-centering Vise Electrode Fixture Machining Tool 8-55 50-75mm. 1X CNC Vise. Size: 75mm 54mm 44mm. Size 75mm 54mm 44mm. Opening distance: ... more(8-55 mm) (50 mm-75 mm). Long service life.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description This 2 way clamp vise is an essential tool for fitters. Our clamping vise has powerful clamping force and can fix workpieces very securely. ... moreThis ensures the stationarity and stability of workpieces so they won't move even slightly as much force has been applied by the fitter. What's included？ 1 X 5 Inch Swivel Base & Angle Tilting 2 Way Clamp Vise 1 X Accessory Set Weights & Dimensions Gross Weight: 55 lb (25 kg) Package Dimensions (L x W x H): 16.5" x 9.8" x 7.5" (42 x 25 x 19 cm) Specifications Jaw Width: 5 inch (125 mm) Jaw Opening: 3.74 inch (95 mm) Clamp Vise Height: 6.5 inch (165 mm) Jaw Height: 1.8 inch (46 mm) Base Swivel: 360º Tilting Angle: 90º Clamping Force: 24 KN max Jaw Hardness: 48 HRC.
Buy It Now
$10.00 Shipping Condition: New Location: Chino, United States 4" CNC Wire Vise High Precision Vise 100mm Clamping SUS 420/440 Stainless Steel. 4" CNC Wire EDM Vise High Precision SUS 420/440 100mm Clamping Stainless ... moreSteel. Precision manual wire cutting is used with wire cutting machines, which is more precise to parts processing.
|
|
|
|
Old Antique Vintage Homemade Handsaw Wood Clamp Vise
This is a neat old homemade handsaw clamp vise. It's made out of plywood, a door hinge and a bolt made into a thumb screw. It is 13 3/4" long X 5 1/2" wide and 1 5/8" thick. The buyer pays 13.00 priority shipping in the USA.
|
|
|
BRIDGEPORT MILLING MACHINE VISE WITH A SWIVEL BASE (JAW 6" JAW OPENING 5")
BRIDGEPORT MILLING MACHINE VISE WITH A SWIVEL BASE(JAW 6" JAW OPENING 5" You are bidding on a Bridgeport Milling Machine Vise with a Swivel base. This Vise has been found to be in good working condition. Specs: Jaw 6" Jaw Opening 5" This Bridgeport Mill Swivel Vise comes with a 14 day return privilege. Shipping can be UPS or it can be picked up locally in Shelton. CT. 14 Day Unconditional Warranty(must return freight prepaid) Check our Store and other Auctions for more great buys. Tag ID 3-28-14-8
|
|
|
Drill Press Vise 3" wide jaw with 3" travel
Drill press Vise- Used 3" wide jaw with 3" travel" 5 1/2" wide x 6 1/2" long x 2 1/2" high
|
|
|
Drill press vise 4" wide Jaw x 1" high
Used drill press vise Jaw 4" wide x 1" high 5" travel Overall dimensions 8"L x 7" W x 3"H
|
|
|
Vintage Columbian 163x32 Pipe Vise Large Capacity Heavy Duty Plumbing Tool (PKM)
Vintage Columbian 163x32 Pipe Vise Large Capacity Heavy Duty Plumbing Tool(PKM) Columbian 163 x 32 pipe vise. This vise is large and heavy so shipping will not be cheap. This Vise functions great and can be put to use right away unless you are a collector of old tools. Very clean for its age. Look at the pictures. Weighs approx 38 pounds. PLEASE REFER TO PICS! Visit My eBay Store We only accept payment by PayPal Once payment has been cleared. We will ship your package In 1 Business days We do not ship to APO/FPO Any other shipping questions or requests please contact us through eBay We offer 14 day return policy We use the ebay return policy If you are returning an item within 14 days of receiving you must use the eBay return process Do NOT refuse shipping if you do then there will be no return There is a 10% Re-Stocking fee Our ratings are ... moreimportant to us Please contact us before leaving a negative feedback We do our upmost to avoid any negative ratings THANK YOU FOR LOOKING! We are a small company buying secondhand items and reselling them for a another chance of life Many of our items we sell are very old and fragile! We pack for their safety. Not for the quick sale or cheapest shipping We purchase all of our items at auctions. Estate sales and flea markets and cannot be sure of their history or whether they've come from smoke-free or pet-free homes. We do our best to list any damage or use. But we are not experts. So if there's something specific you need to know before bidding. Please ask. We use as many recycled materials as possible to help the enviroment Keeping it GREEN! ANY QUESTIONS PLEASE CONTACT BEFORE! BIDDING ALL OF OUR ITEMS ARE FROM ANOTHER PLACE AND TIME PLEASE IF YOU ARE LOOKING FOR SOMETHING PARTICULAR ASK FIRST IF YOU DO NOT SEE YOUR ANSWER IN OUR ADD ALL SOLD AS IS! Use eBay to contact us with any questions We do our best to describe our items accurately
|
|
|
VINTAGE WILTON VISE No 935 3 1/2" JAWS *SWIVELS & OPENS SMOOTHLY*
Up for your consideration is a VINTAGE WILTON NO. 935 VISE in great conditon. It swivels and opens smoothly. THe jaws are 3 1/2" wide and they open to about 6 1/4" As you can see in the pics. It is very experienced in what it does which makes working with it a lot easier. I also want to point out the damage it has next to the left jaw. It goes as deep as the bar and is a little loose due to the missing hex screw. But nothing that you should have to struggle with when the winning bidder is putting it to use. Under the base seems like a little suraface rust but nothing the effects its smooth swiveling. If you have any questions feel free to contact me and I will do my best to answer. Thanks for looking and Happy Bidding!
|
|
|
POLICE MILITARY LAPTOP COMPUTER CAR MOUNT Pana Vise CONTRACTOR IPAD IPOD tablet
POLICE MILITARY LAPTOP COMPUTER CAR MOUNT Pana Vise CONTRACTOR IPAD IPOD tablet I'm a contractor by trade. And have used this mount in my last 4 trucks. I have used this in a 2001 Chevrolet 1500, 2005 ford F-150, 2012 Chevrolet 2500 and 2012 GMC YUKON DENALI. Very easy adjustable and no drill install. Very secure mount, adjustable feet for perfect custom fit. Posted with;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1451424e7c9-0x117-
|
|
|
Vintage LITTCO #112 BENCH VISE LITTLESTOWN PA Vice Anvil
Good working condition but the one edge plate is the wrong one its off center and the swivel bar is a carriage bolt. Great little shop vise
|
|
|
Wilton Bench Vise Swivel 3 1/2" Jaw Anvil Red Nice!
In very good condition see photos a little bit dusty but in very good condition real nice wilton here guys Posted with
|
|
|
4" D- 44 Columbian Anvil , Pipe Vise with a Hardy
Beautiful 4" D-44 Columbian Anvil. Pipe Vise with a Hardy which is used as a chisel for working with metal, Vise has been taken apart cleaned and painted, in great condition, wt 28 lbs
|
|
|
Vintage Littlestown #42 Howe & Foundry Pipe Vise
Some surface rust.Works smoothly. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14514333c07-0x106-
|
|
|
Antique Clamp Vise Hargrave Cincinnati Tool Co US Adjustable Wood Screw #710 VTG
Antique clamp vice the handles are slightly split but the vice is in good condition. Take a look at the pictures to see its age and some of its imperfections. Nice Hargrave form the 50's wood antique vice. Nice dark wood-some paint specs here and there.
|
|
|
VINTAGE BENCH CLAMP VISE ANVIL !!! VERY NICE CONDITION !!! VERY OLD & RARE !!!
UP FOR AUCTION IS A VINTAGE BENCH CLAMP VISE ANVIL! SUPER NICE! I HAVE NEVER HAD ONE OF THESE BEFORE AND UNSURE OF IT USE ALL ORIGINAL AND IN GREAT WORKING CONDITION NICE COLLECTOR PIECE OR VERY MUCH USEABLE! SEE THE PICTURES FOR THE BEST DISCRIPTION. Everything I sell is as I found it. AS IS. I never clean or repair any item. I prefer to leave that to you. I describe things and take photos to the best of my ability. But I'm no expert. Any questions you have. Just email me.no problem. I only ship to the lower 48 of the good ol USA and the Global Shipping Program. Winner please pay within 3 days of auction end. If more time is needed. Just email me.no problem. Will combine shipping whenever possible. Just let me know if interested in multiple items. eBay wants all multiple purchases to use the SHOPPING CART. It does make it easier. Economy ... moreshipping is always through USPS. If 13 oz. or less it will be FIRST CLASS MAIL( 2-5 DAYS) Up to 1 1/2 lbs. will usually be PRIORITY MAIL( 2-3 DAYS) and all weights above that will be PARCEL SELECT( 2-9 DAYS) Other expedited services are available upon request. THANK YOU and HAPPY BIDDING!
|
|
|
Vintage Tool Hand Vise with red wood handle 6 1/2" long Works Made in U S A
Vintage Tool Hand Vise with red wood handle 6 1/2" long Works Marked: Made in U S A Shows wear and use from age. Please ask questions and see pictures.
|
|
|
TOY MARX Pocketools BENCH VISE No.1126 vintage old tool pocket clamp jewelers
You are buying ONE(1) MARX Pocketools Bench Vise No. 1126.89 miniature toy bench vise but a working replica. can be used for fine hand work. in the original packaging but the plastic is damaged so the tool is removable. Please note that the vise. Although it works, does not open only by turning the handle.you have to pull it open as well. but it closes smoothly. Screws tightly to the bench.
|
|
|
LIGHTLY USED 4 1/2" ACE, BENCH VISE, MACHINE VISE, NICE JAWS, SWIVEL BASE, CLEAN
4 1/2" ACE BENCH VISE. MECHANICS VISE, MACHINE VISE JAWS ARE 4 1/2" WIDE AND VISE OPENS UP TO ABOUT 4 1/2" SWIVIL BASE. HANDLE IS NICE AND STRAIGHT. REPLACEABLE JAWS. JAW ARE IN REALLY NICE CONDITION. VISE IS USED IN NICE USABLE CONDITION. VISE IS FREE OF OIL AND GREASE. ALL IN ALL A GOOD USABLE BENCH VISE THAT WILL LAST YOU A LIFE TIME OF GOOD USE IF YOU TAKE GOOD CARE OF IT. THANKS FOR LOOKING. WE WISH YOU A GREAT DAY, GOD BLESS AND GOOD BIDDING!
|
|
|
Vintage Wilton 101028 Swivel Base Bullet Vise 4" Jaws
Vintage Wilton 101028 swivel base 4" bullet vise it is 16" long with a 10" 4 hole base and stands 8 3/4" tall.the 4" jaws open to 7" the vise weighs 50 lbs. the jaws are brass. The tool weighs 50 lbs. It has been complety taken apart, cleaned, lubricated and re painted with a baked on hammered finish.This is a great addition to any shop.local pickup is fine if you wish use the ebay shipping calculator for shipping cost or serious buyers can email me with their email address and I will figure the shipping cost as the ebay calculator has been a little high lately.email me with questions and I will do my best to be of help.good luck.Richy NO INTERNATIONAL SHIPPING! lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-1451669369a-0x112-
|
|
|
Vintage Red Columbian 4" Swivel Bench Vise # 04M2 Made in the USA
Vintage Red Columbian 4" Swivel Bench Vise#04M2 Made in the USA Does have pipe jaws for clamping round items. Swivels good and the locking rod works. The width of the jaw is about 4" inches and the opening is a little over 4 inches. Needs some cleaning. Has some paint on it. Handle bent a little but does not interfere with operating. Mounting hardware included. Please see photos and ask questions if needed before bidding! PayPal payment due at end of sell… Buyer pays all shipping costs.
|
|
|
Vintage Wilton 820 Baby Bullet Machinist Bench Swivel Vise With Powrarm Junior
The vise is from 1953. Wears it's original paint, has excellent condition 2" jaws, a double lock swivel base and is in fantastic condition for it's age. This vise includes the swivel base that you do't often see when they are mounted o a PowerArm. The PowerArm is Schiller Park and newer, it works but could use a good cleaning and lubrication, it does not have the top piece to mount the vise to it, you could either make one or buy one(there is a PowerArm on ebay for parts currently) Please see picture(s) below, they are actual pictures of the listed item. Shipping: $14.50 for Insured Priority Mail. If you buy multiple items and I can combine shipping I certainly will. Click the image(s) below(and above) for a much LARGER picture. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-145166b84b2-0x101-
|
|
|
Ridgid Yoke Vise Clamp No 21 1/2' to 2" Very Nice
This is a very nice Ridgid No 21 Bench Yoke Vise. It has been cleaned and repainted. Overall condition is very good.
|
|
|
Stanley Bench-Clamp 2 1/2" Jaw Swivel Vise, USA
Stanley Bench-Clamp 2 1/2" Jaw Swivel Vise. USA Used condition with wear marks. Vise stands up 4" from the bench when clamped in place. The vise jaws are 2 1/2" wide. There is a spring lever in the base that you lift to swivel the vise and it locking positions. The line in the body is the casting parting line not a break. Pics show views of one Vise. Sales to US only. I combine shipping whenever possible so please check out my other auctions. All items are packaged securely to ensure they arrive intact. I don’t end auctions early. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VINTAGE UNKNOWN CLAMP ON BENCH VISE WITH ANVIL 3 1/2" THROAT 2" WIDE JAWS GC
BENCH TOP CLAMP ON VISE. 3 1/2" THROAT& 2" WIDE JAWS. IT IS IN GOOD USED CONDITION. I DO DISCOUNT SHIPPING ON MULTIPLE ITEMS. JUST ASK. SHIPPING QUOTE IS FOR THE U.S. ONLY(LOWER 48 STATES) ALL OTHERS PLEASE CONTACT ME FOR NEW QUOTE BEFORE BIDDING PLEASE! IF YOU HAVE LESS THAN 10 FEEDBACKS YOU MUST CONTACT ME PRIOR TO BIDDING FOR APPROVAL. CHECK OUT MY OTHER STUFF! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-145166b864a-0x118-
|
|
|
ORIGINAL ZYLISS PROFI-KING WOODWORKING CLAMP VISE SYSTEM Swiss Made
ORIGINAL ZYLISS PROFI-KING WOODWORKING CLAMP VISE SYSTEM Swiss Made Thanks for looking if you have any questions please ask. Have a great day. Normal 0 false false false EN-US X-NONE X-NONE ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-145166bdf36-0x104-
|
|
|
GOOD ROUND STOCK CLAMP OR VISE, HOLDS ROUND STOCK WHILE YOU DRILL OR MACHINE IT
DRILL PRESS OR VISE ROUND STOCK HOLDER. ROUND STOCK HOLDER HOLDS ANY ITEM THAT IS ROUND SO ONE CAN DRILL IT OR MACHINE IT. WILL HOLD ANY ROUND ITEM UP TO ABOUT 1 1/4" DIAMETER. USE IT ON A DRILL PRESS IN ORDER TO DRILL A HOLE IN THE STOCK. USE IT ON A VISE TO HOLD ROUND STOCK STEADY, USE IT ON A MILL TO HOLD ROUND STOCK STEADY TO MILL IT. LOT OF GOOD USES FOR A TOOL OF THIS TYPE. LAST TWO PICTURES ARE PROVIDED TO SHOW A ROUND ITEM BEING HELD IN THE TOOL. THANKS FOR LOOKING. WE WISH YOU A GREAT DAY, GOD BLESS AND GOOD BIDDING!
|
|
|
6061 Aluminum Flat Bar Stock and DeSta Co Clamp Machinist Vise Fixture Jig ETC
I Just can't see myself sending these Jigs to the recycler.so what the heck. These clamping Jigs are almost new. Most come with a 201- B DeSta Co clamp($28 when new) and Cushioned Clamp Foot as shown. OAL is 6.00" 0.875" width is 1.875" Tall. Then 0.625" up to 2.50" total height 2 Tapped 1/4-20 holes on 5" centers on bottom of units Beautiful Aluminum Units weight 1lb- 5oz each. Shipping is $3 each. Buy one or all(9) If anyone buys all(9) I'll ship the 2 without clamps as well for free. PayPal only Please*Additional Gauges. Accelerometers, Cables, Test Probes, Linear Precision stages and an array of DE Lab Products in Our Other Ebay listings* Please note our 100% Positive Feedback)
|
|
|
A1 PAK-A-PUNCH GENERAL MOTORS G1 6-CUT KEY VISE
A1"Pak-A-Punch" Key Vise General Motors Model G1 6-Cut Nice Used Condition Thanks for Looking! Will Securely Pack& Quickly Ship
|
|
|
WELDING_HEAD_LOCKING_VISE_GRIPS_PLIER_CLAMP_ #226
VISE-GRIPS Vise-Grip Locking WELDING CLAMPS#226 Details about Welding_Tools_Vise_Grip MADE IN CHINA I HAVE LISTED AS USED THEY ARE A YEAR OR SO OLD AND NOT USED THEM. WELDING TOOLS VISE-GRIP LOCKING CLAMP TOOL CLAMP ACCESSORY MECHANICS WELDER MACHINIST WORKSHOP GARAGE MECHANIC WELDERS MSRP $22.00 EA. I AM DOWN SIZING MY TOOLS. I AM SELLING MANY OF MY TOOLS. PLEASE CK THE OTHER TOOLS LISTED. I WILL BE LISTING ITEMS FOR A WHILE. I WILL SCHEDULE THE AUCTIONS CLOSINGS FOR SUNDAY NIGHTS. PLEASE CHECK OFTEN THE LOW STARTING PRICE IS NOT A REFLECTION OF ITS VALUE. BUT TO ENCOURAGE BIDDING, THERE ARE NO RESERVES IN ANY OF MY AUCTIONS. I DO NOT CANCEL LISTINGS REGARDLESS OF THE OFFER SO FEEL FREE TO BID. IT IS HERE TO SELL. CHECK OUT MY OTHER AUCTIONS FOR RELATED ITEMS AND ACCESSORIES. PLEASE LOOK CAREFULLY AT THE PICTURES. THEY ARE AN INTEGRAL PART ... moreOF MY DESCRIPTION AND SHOW EXACTLY WHAT YOU ARE BIDDING FOR. TRACKING CONFIRMATION IS INCLUDED. USA& CANADA ONLY AT THIS TIME. CONTACT ME FOR OTHER OPTIONS. I HAVE LISTED THIS ITEM TO THE BEST OF MY ABILITY. ANY BLEMISHES. DENTS OR OTHER AFFECTING VALUE IS NOTED. PLEASE MAKE PAYMENT WITHIN THREE DAYS OF THE AUCTION ENDING. THE ITEM WILL BE SHIPPED WITHIN ONE BUSINESS DAY AFTER PAYMENT HAS BEEN RECEIVED. INSURANCE IS INCLUDED UP TO $100.00. ADDITIONAL COVERAGE OPTIONAL, HOWEVER IT IS RECOMMENDED FOR HIGHER PRICED ITEMS, CONTACT ME FOR DETAILS. PLEASE LEAVE POSITIVE FEEDBACK FOR ME WHEN THE ITEM ARRIVES PAYPAL IS THE PREFERRED METHOD. OTHER FORMS ACCEPTED. IF FOR SOME REASON THERE IS AN ISSUE WITH THE ITEM PLEASE CONTACT ME ASAP. ANY QUESTIONS PLEASE ASK. REFUND IF NOT SATISFIED g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-145184d6fb7-0x10a-
|
|
|
WELDING_LOCKING_VISE_GRIPS_PLIER_CLAMP_SET 3PC #221
VISE_GRIP TYPE_ 3PC_5" 7" 10"LOCKING_VISE_GRIPS_PLIER_CLAMP_SET 3Pc 5" 7" 10" Locking Vise_Grips Plier Clamp Vice Set#221 Details about Welding_Tools_Vise_Grip I HAVE LISTED THESE AS NEW ALTHOUGH THEY ARE A YEAR OR SO OLD AND NOT USED THEM. THE PADS ARE SCRATCH FREE. WELDING TOOLS VISE-GRIP LOCKING CLAMP DUCK BILLS TOOL CLAMP ACCESSORY MECHANICS WELDER MACHINIST WORKSHOP GARAGE MECHANIC WELDERS MSRP $22.00 I AM DOWN SIZING MY TOOLS. I AM SELLING MANY OF MY TOOLS. PLEASE CK THE OTHER TOOLS LISTED. I WILL BE LISTING ITEMS FOR A WHILE. I WILL SCHEDULE THE AUCTIONS CLOSINGS FOR SUNDAY NIGHTS. PLEASE CHECK OFTEN THE LOW STARTING PRICE IS NOT A REFLECTION OF ITS VALUE. BUT TO ENCOURAGE BIDDING, THERE ARE NO RESERVES IN ANY OF MY AUCTIONS. I DO NOT CANCEL LISTINGS REGARDLESS OF THE OFFER SO FEEL FREE TO BID. IT IS HERE ... moreTO SELL. CHECK OUT MY OTHER AUCTIONS FOR RELATED ITEMS AND ACCESSORIES. PLEASE LOOK CAREFULLY AT THE PICTURES. THEY ARE AN INTEGRAL PART OF MY DESCRIPTION AND SHOW EXACTLY WHAT YOU ARE BIDDING FOR. TRACKING CONFIRMATION IS INCLUDED. USA& CANADA ONLY AT THIS TIME. CONTACT ME FOR OTHER OPTIONS. I HAVE LISTED THIS ITEM TO THE BEST OF MY ABILITY. ANY BLEMISHES. DENTS OR OTHER AFFECTING VALUE IS NOTED. PLEASE MAKE PAYMENT WITHIN THREE DAYS OF THE AUCTION ENDING. THE ITEM WILL BE SHIPPED WITHIN ONE BUSINESS DAY AFTER PAYMENT HAS BEEN RECEIVED. INSURANCE IS INCLUDED UP TO $100.00. ADDITIONAL COVERAGE OPTIONAL, HOWEVER IT IS RECOMMENDED FOR HIGHER PRICED ITEMS, CONTACT ME FOR DETAILS. PLEASE LEAVE POSITIVE FEEDBACK FOR ME WHEN THE ITEM ARRIVES PAYPAL IS THE PREFERRED METHOD. OTHER FORMS ACCEPTED. IF FOR SOME REASON THERE IS AN ISSUE WITH THE ITEM PLEASE CONTACT ME ASAP. ANY QUESTIONS PLEASE ASK. REFUND IF NOT SATISFIED
|
|
|
VISE GRIP DEWITT PETERSON CR 7 DEWITT NEBR ,GOOD WORKING CONDITION
DEWITT PETERSON CR 7 VISE GRIP IN GOOD WORKING CONDITION. HAS VERY MINOR SURFACE RUST,GOOD WORKING GRIP,I COMBINE SHIPPING
|
|
|
Owensboro KY Martin Vise Stand H.P. Martin & Sons Stands Without Hitching Fob
Owensboro. Ky. H.P. Martin& Sons/ The Martin Vise Stand, Stands Without Hitching(Tool& Stand) Nickel plated bronze, 43mm by 37mm, fob top, extremely fine condition with some toning, signed Childs& Co. Chicago. You will receive an email invoice from me after the auction closing- check your bulk or junk mail folder before inquiring. Combined shipping is offered only if you wait for my invoice( not the eBay end-of-auction notification) The combination of postal rate increases. EBay policies and increasing numbers of problem bidders have resulted in the following shipping rates based on value, weight and experience with the buyer. IF YOU BID IN THIS AUCTION YOU AGREE TO FOLLOW THE FOLLOWING SHIPPING TERMS: DOMESTIC SHIPPING Sales under $50- $2.00 Sales $50 to $250- $3.00 Sales $251 to $600- $4.50 Sales over $600- Registered mail at ... moreactual cost INTERNATIONAL SHIPPING Wait for my(not eBay's) invoice- if I can offer less expensive shipping than listed below I will give that option on my invoice only or on inquiry. Sales under $50- $6.50 Sales over $50- $36.00 via International Priority Mail which meets the eBay seller protection standards. In some limited cases registered mail may be substituted($16.00 including postage) ask all shipping questions before bidding. Previous customers- ask. Addresses outside the US: Please note: Registered airmail provides maximum indemnity coverage of $46.14 to all countries. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. I do not mark merchandise values below the auction or fixed price or mark items as"gifts" US and International government regulations prohibit such behavior. Please note: Due to country specific rules and prohibitions, insurance and indemnity may be limited and may not apply to all items. PayPal is offered and ships as soon a
|
|
|
Stanley No. 702 Aluminum Bench Vise Made in the U.S.A. Opens to 3-1/2"
Stanley 702 aluminum vise. In good working condition showing normal wear from use. Opens to 3 1/2" Has 5" wide jaws. Please email with any questions. Thanks for looking. Happy to combine shipping when possible.
|
|
|
Brink and Cotton Hobby Vise 2.5" 2-1/2" Jaws Bench Clamp Nice
This is a nice Brink and Cotton Made in USA hobby vise. 2 1/2" Jaws. Bench Clamp. It has been cleaned and repainted as shown in pictures. Works great.
|
|
|
The Chas Parker Co. Bench Vise No.973 ½ Swivel Base.
The Chas Parker Co. Bench Vise No.973 ½ Swivel Base. Meriden. Conn. U.S.A. Jaw width is 3 ½” Jaws open max. 6“ Overall length of the vise closed 15” open is 18” Height of the vise is just under 9” tall Weight of the vise is 44-45 Lbs. Pack in the box, the vise weight is 49 Lbs. No breaks or cracks. Vise wrench No.2. Slightly bent. The turn screw housing was clean up some. Where the handle. worn) The vise handle is bent& ding up. Repair or replace. Smooth jaws on the vise. Small chips on the jaw edge. As stated above. I only ship within the United States and 1 business day after receiving cleared payment through Pay Pal. I will ship USPS Parcel select or Priority Mail or UPS Ground to U.S. only. I accept returns within 14 days with your money back(buyer pays shipping fees) Thank you for looking and good luck to all bidders! local ... morepickup is also available. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-145190c2522-0x111-
|
|
|
Vtg-WILTON- UX-121079 Tilt / TILTING, 4" SWIVEL BASE VISE w/ANVIL-GOOD! -
Vintage WILTON- UX-121079 TILTING- 4" SWIVEL BASE VISE w/ANVIL MADE in U.S.A. Price Includes Shipping! We have for your consideration a Vintage- WILTON- UX-121079- Tilt/ TILTING. 4" SWIVEL BASE VISE w/Anvil in average overall working condition! The vise turns freely- threads look good- opens to a max of 5 inches and seems to work the way it is supposed to. Just another testimony to these older Made in U.S.A. tools- they were designed to work- be worked on and last a lifetime or two! I do not see any obvious breaks/ cracks and/or repairs. Please refer to all the pictures for measurements. What can we say- please take a good look at all(12) pictures. You are seeing the vise pretty much just the way we got- will need cleaning! The vise measures approximately 10" in overall length(closed) 7" in height and weighs right at 16 ... morelbs! The vise jaws measure 4 inches and the vise opens up to 4-1/4 inches. The vise is used and in average overall vintage working condition. The vise shows wear- scratches/ scuffs/ marks/ hammer strikes/ saw cuts/ tarnish& staining with some areas of surface rust from normal use(see pics) w e only mention this for accuracy as it does not detract from the usefulness of the vise. Please note: Vise will be dis-assembled for shipping- easily re-assembled. Just a reminder: what you see is what you will be getting- and once more- Price Includes Shipping! Please note: vise may be partially dis-assembled for shipping- easily re-assembled. Please look at the pictures carefully and do not hesitate to ask questions before bidding. Thanks for doing business with us! OK. Time for the LARGE Fine Print: In the interest of making this a very pleasant experience for everyone. We would respectfully ask that all potential bidders read the below statements. 1) We respectfully ask that all winning bidders pay for their purchase using Paypal within 3 days of the auctions ending or immediately if a“buy-it-now” item is purchased. 2) Winning bidders live in the United States and your ite
|
|
|
cast iron LITTCO carpenters bench VISE 197 Littlestown PA Hardware Foundry Co.
perfect for active work or restoration BACKGROUND GRID IS SQUARE INCHES About NE_ESTATE_SALES. The best of everything from old postcards to very new industrial equipment Quality and rare items. NEW and USED. From residential, retail and commercial sales along the Main Line of Pennsylvania… We sell only on e B a y! We GUARANTEE happiness with item. Delivery& service. A SIGNATURE may be required for some items over $300 Foreign delivery: Registered or traceable mail& PRE-SALE arrangements! ONE WEEK DELIVERY for almost all items(from order to in-hand) Industrial equipment and other large items are targeted for 10 day delivery. Expect USPS Delivery! 100% perfect for us! NO PICKUP REQUESTS! Any CONTACT should be through the eBay message system. Not external email. Fixed price items priced at $5 or less will NOT be re-listed. Let us know ... morewe have succeeded with positive feedback… we will reciprocate! Our goal is always to EARN your business
|
|
|
GL Swivel Bench Vise Made In Japan 4" Capacity
This is a GL bench vise that is made in Japan. It shows normal cosmetic wear and is a swivel vise. Please see photos. Thanks for looking!
|
|
|
Vtg -CRAFTSMAN- CLASSIC OLD SCHOOL -5216- 4" Swivel Base Bench Vise w/Anvil -USA
Lot's of Character and Experience! All in All- Good Working CLASSIC- OLD SCHOOL- 26 lb Vise! CRAFTSMAN 4" Model No. 5216 Swivel Base Bench Vise w/Anvil Made in U.S.A. Price Includes Shipping! We have for your consideration a- CLASSIC OLD SCHOOL-5216- 4" Swivel Base Bench Vise w/Anvil in average to good overall working condition(considering the age of this great old vise) The vise turns freely- opens to an absolute max of 5-1/2 inches and just works the way it was supposed to. Another good example of the old U.S.A. made tools- built to work- be worked on and last a generation or two! I do not see any obvious cracks/ breaks and/or repairs. What can we say- please take a good look at all(12) pictures. Vise will need some cleaning. The vise measures approximately(13" in overall length/closed) 17" in overall length/ open) ... more7-1/4" in height and weighs right at 26 lbs! The vise jaws measure 4 inches and the vise opens up to a working max of 5-1/2 inches. The vise is used and in average to good overall working condition. The vise shows wear- scratches/ scuffs/ marks/ hammer strikes- saw marks- tarnish& staining with areas of surface rust from normal use(see pics) w e only mention this for accuracy as it does not detract from the usefulness of the vise. Just a reminder: what you see is what you will be getting- and once more- Price Includes Shipping! Please note: vise may be partially dis-assembled for shipping- easily re-assembled. Please look at the pictures carefully and do not hesitate to ask questions before bidding. Thanks for doing business with us! OK. Time for the LARGE Fine Print: In the interest of making this a very pleasant experience for everyone. We would respectfully ask that all potential bidders read the below statements. 1) We respectfully ask that all winning bidders pay for their purchase using Paypal within 3 days of the auctions ending or immediately if a“buy-it-now” item is purchased. 2) Winning bidders live in the United States and your item purchased will be s
|
|
|
Bench Vise, 3.5" Jaws, Swivel Base, Anvil, Pipe Clamps, 3-bolt Mounting
Bench Vise. 3.5" Jaws Swivel Base. 3-bolt Mounting. Anvil. Pipe Clamps. Original blue color. Some rust on top. No. 63-3 cast on base bottom.
|
|
|
Mascot Precision Tools H199 Hand Vise Opening 1" Wooden Handle Hobbies Craftsman
You are buying a Mascot Precision Tools H199 Hand Vise. It Opens to 1" and has a Wooden Handle. This is ideal for any Hobbies or Craftsman's project. Please see pictures for details. This is made in USA. e Prefer PayPal and please submit your payment within 24 hours of auction end. We usually ship with USPS 1st Class or Priority mail as standard shipping. And will ship with USPS Express Mail if you choose to pay for that. We try and ship by next business day. Typically the same day, after payment is received. We will ship to any country outside of the 50 United States IF YOU PAY FOR THE SHIPPING. Feel free to email us with any concerns or questions through the"Ask Seller A Question" option available in this listing. Thank you for considering shopping with us.
|
|
|
Kurt D675 6" milling machine vise drill press w/ handle exc condition SHIPPING
Selling a Nice. Kurt D675 Milling machine vise. It has 6" wide jaws and will open up to 6 inches. It includes the handle. It comes as pictured. Very Very nice set up. Feel free to make us an offer. Thanks FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. LOCAL PICK UP IS MORE THAN WELCOME. BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-145191ecd6a-0x104-
|
|
|
Very nice heavy duty milling vise 5" w/ swivel rotary base Drill American Kurt
Selling a Nice. Heavy duty vise for milling machine, drill press, jig borer, etc etc. We didn't find a manufacturers name, but it does appear to be of very good construction. We would guess that it is American made. It has a swivel base. It is 5 inches wide and will open up to 5 inches. It is also marked 360 degrees around the table. Very Very nice set up. Feel free to make us an offer. Thanks FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. LOCAL PICK UP IS MORE THAN WELCOME. BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
|
|
|
WILTON VISE, 400S, NEW JAWS4" ,EXTRAS!! EXCELLENT
WILTON VISE. 400S, NEW JAWS4" EXTRAS! EXCELLENT Sorry. I apologize for ending my last vise listing early. Due to a mishap, it was broken and no longer sellable. This 4" 400S. 1989 came in nice condition. It was covered in crud and needed a makeover so I repainted it. The anvil had light wear which I lightly sanded down. I also installed a shim behind the collar so that the handle response is instant. Despite a small nick(photo 8)this vise is as about as nice as you will find. Operation is flawless, handle response is perfect, the base swivels 360 easily and locks down well with the 2 original lock downs which are near straight and nice. The spindle handle is straight with new finger savers. Fitted on this vise are a new pair of OE Wilton jaws along with OE Wilton Magnetic Aluminum liners plus you will get the old jaws which I could ... morehave left one but didn't. Jaw alignment is 100% Fellas, this is a nice complete package. The photos speak for themselves. Any question, please ask. Shipping will be Fed Ex to the 48 states. Thanks for looking
|
|
|
Barely Used Wilton Vise With Anvil 4" Jaw Width 3 3/4" Jaw Opening
Up for auction a barely used Wilton 4" jaw width and 3 3/4" jaw opening vise. Price shown includes shipping to lower 48 states only. Thanks for viewing the auction. Posted with dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-145191ecb9b-0x109-
|
|
|
Vintage / Antique Paramo 4-1/2" Machinists Vise Made In England
As shown. A very old Paramo vise in good working condition. The jaws measure 4.5" wide and open up to 5" Please note this is a bit of an unusual design in that when the handle is turned it tightens up the jaws like a normal vise, but when you loosen the handle it doesn't pull the vise jaw back.it just loosens it up and then you slide it back. Please feel free to ask any questions and thanks for looking!
|
|
|
Lot Of Two Vise Grips (1) 10R (1) 11R
Welding shop closed. Look a tad rough but work perfectly and will due for any welder, both are vise grip brand one is a 10r one is an 11r Posted with
|
|
|
Vintage Houston TX Gearwrench Chain Pipe Tong Vulcan Vise Wrench Tool 37"
A very good looking tool that needs a new home! It measures 37" The handle is not perfectly straight. Weighs 18 lbs! Look at the pictures good and email with any questions before bidding. Sold as is. Will combine on shipping. Thanks for looking! I sell mostly used or vintage items. Returns will be only accepted if item is grossly misrepresented.It is your responsibility to read the description and ask questions before bidding. Will be shipping fed-ex. So no PO boxes!
|
|
|
ridgid bc-810 pipe vise 1/2" to 8" bend'g cap 1-1/4"std pipe
ridgid bc-810 pipe vise 1/2" to 8" bend'g cap 1-1/4" std pipe. this vise has been cleaned and painted. there is a brand new jaw installed on this vise. this pipe vise is in excellent used condition. utility knife is not included with vise. shipping and handling is $31.70 to continental u.s.a. only! thanks for looking and good luck bidding. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1451cd2ba17-0x10a-
|
|
|
Ridgid No.450 Tri-Stand Tripod,1/8"-5"Dia.Chain Vise,Nice! INV=13973
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Ridgid No.450 Tri-Stand Tripod for working with pipe from 1/8" to 5" diameter. 34-3/8" Distance from floor to top surface. Equipped with chain-type vise. NOTE: This Ridgid Model 450 Tri-Stand is in very good condition. Please review the photographs provided; and do not hesitate to ask me any relevant questions. No foreign bidders. No exceptions. NO CANADIANS. This item is safety critical. The responsibility for ensuring safety of this item and OSHA compliance lies solely with the buyer. The buyer needs to obtain a proper safety evaluation of this item from a qualified specialist. Safety is application specific and the seller is unable to make a safety determination for this item. Our friends can move your machinery or remove obsolete equipment. The goods are sold ... morefrom the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois without giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Buyer agrees to pick-up items paid for. Within 45 days of payment, and further understands that storage beyond reasonable time damages the seller. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, whichever comes first, are forfeited as abandoned and as payment for storage costs and liquidated damages, with no refund given. Buyer assumes responsibility to ensure safety of this item. The seller is unable to make any guarantees regarding safety of this item. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1451d03dacc-0x10b-
|
|
|
VINTAGE SMALL CAST IRON PIPE VISE H-OO NEAT L@@K7 INCHS TALL
UP FOR AUCTION IS THIS VINTAGE SMALL CAST IRON PIPE VISE 7 INCHS TALL STILL WORKS GREAT DOES NEED A GOOD CLEANING IT HAS H-00 PLEASE ASK FOR MORE PICTURES OR ANY QUESTIONS VERY HEAVY I PUT 16.00 SHIPPING IF CHEAPER WILL REFUND.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1451d514e71-0x103-
|
|
|
MACHINIST TOOLS LATHE MILL HUGE Morton 6" Bench Vise LI 40
SINCE THIS ITEM IS TOO LARGE. SHIPPING ARRANGEMENTS ARE TO BE MADE BY THE BUYER. THE LATHE CAN ALSO BE PICKED UP. PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS, Very heavy. Needs some cleaning. Sold as is, no returns. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO ... moreNOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.BBBB
|
|
|
INDIANA FARM SHOP FIND=3 1/2" BENCH MOUNT SHOP VISE-USA MADE-WITH MOUNTING BOLTS
INDIANA FARM SHOP FIND=3 1/2" BENCH MOUNT SHOP VISE-USA MADE-WITH MOUNTING BOLTS Description. FREE SHIPPING ON THIS FRESH INDIANA FARM SHOP FIND-USED BENCH MOUNT 3 1/2" VISE-MADE IN USA-COMPLETE WITH THE 3 OLD MOUNTING BOLTS-NICE OLD VISE OPENS UP TO 4" WIDE-NO CRACKS.WELDS OR REPAIRS-DO SHOW SOME WEAR AND USE FROM OVER THE YEARS BUT STILL HAS LOTS OF USE LEFT IN IT- CHECK MY OTHER SALES FOR MORE VINTAGE ITEMS-SOME WITH FREE SHIPPING=SUPER-SIZE THE PICTURES FOR A BETTER LOOK! Before bidding… make sure you have read the description carefully. I describe the condition of the item; markings. Dimensions, flaws, and other comments to help you understand what may not be seen in pictures. Ask questions: Always. Always, always do this if you are unsure about what you are bidding on or need to know ANYTHING about the item. Message me ... moreon eBay and I will promptly reply. We all work hard for our money- if you’re going to spend it with me, I want you to be satisfied. Shipping: Shipping costs on auction items are calculated along the basis of item weight and size. I WILL NEVER tack on handling fees or“made up” service charges. Combined Shipping: When multiple items can be packed together to save money and ship safely. I gladly will. I make nothing on shipping. Simply request an invoice before paying. Payment: this is simple. Pay Pal. It’s free to register and cost nothing to use. Payment is politely expected within 48 hours of winning the item. If the item is not paid for within 4 days, eBay will open an unpaid item case automatically. I will not turn off the unpaid item case. So this is pretty simple- If you are the winning bidder, Please pay for it. I strive to sell quality merchandise. I’ll pack your purchase carefully for shipment and hope win your confidence to become one of my many repeat customers with customer service like no other. Check out my“No Hassel Return Policy. Returns& Damaged Items: If your items arrives damaged: Step#1. Relax. It’s insured(at my expense) and you WILL BE REFUNDED by me thr
|
|
|
Vintage C. Parker Bench Vise / Vice # 978 w/stand.
This is a vintage C. Parker bench vise#978. Which has been totally restored. The vise has 8” wide jaws and weighs 297 lbs. The vise was stripped down, primed painted and re-assembled. The handle, knob and swivel lock have been polished. The jaws are new hardened jaws, custom made by Bench Vise Jaws. Com. in Colorado. The handle is 20” long and 1” dia. There are no cracks or welds. The only defect on this vise is some kicks in the slide, which don’t effect the operation(see Pics) The vise comes with a custom heavy duty stand. The base of the stand is made from a ½” thick 24” X 24” steel plate. The post of the stand is thick wall pipe and 27” tall. I would gusstimate the stand weighs approximately 165-175 lbs. Local pickup in Tucson AZ. If you want to arrange shipping, that’s OK. For sale locally, so auction may be ended at any time. Thanks ... morefor looking.
|
|
|
Old Iron Benchtop Clamp On Vise with 1&1/2" jaws
looks good as pictured- ask about my others. I sell everything as found. Described and pictured.WILL SHIP OVERSEAS-EMAIL FOR SHIPPING COST- email any questions about shipping or payment. shipping weight 4# to save you money I ship mostly parcel post unless stated different in listing, which takes longer for delivery. Priority delivery is available too. Shipping cost normally includes delivery confirmation and oversize surcharge if applicable. I can ship a 70# box full parcel post. Ask about your zip code cost for combined shipping. Use shipping calculator if cost is not stated. VISIT MY EBAY STORE. Check out my boxload shipping sale. Everything in store that will fit into a small box measuring 11"x8.5" by 5.5" will be shipped flat rate priority for 12.30 or use calculator.I sell used antiques and collectables from estate sales ... moreand farm auctions. They will be in average used condition unless stated otherwise. I am not an expert on anything so look at the pictures and ask questionsl Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Antique Vintage Littlestown Vise Anvil # 25, 3 1/2" Jaw Swivels Bench
For sale is an Antique Vintage Littlestown Vise Anvil# 25 PA. 3 1/2" Jaw Swivels Bench. I think it is may be missing the swivel base. And the Jaws plates. One of the the jaws has a chip in one of the corner. PLEASE LOOK TO THE PICTURES FOR MORE DETAILS AND ASK ANY QUESTIONS YOU MAY HAVE. AS ALWAYS. YOUR MONEY BACK IS GUARANTIED. Happy Shopping. PLEASE NOTE: THIS ITEM WILL BE SHIPPED ON APRIL 18th. 2014 I AM VERY SORRY FOR ANY INCONVENIENCE. I NEED SOME REST. THANK YOU FOR YOUR UNDERSTANDING AND YOUR BUSINESS. TAKE CARE.
|
|
|
Sears Craftsman Tools No 506 -51801 Swivel Bench Vise Vice With 3 1/2" Wide Jaws
This is a Sears Craftsman 506- 51801 mechanic's bench vise. It is in good working condition showing normal wear. You can refer to the photos to judge the condition of this vise for yourself. My photos are a part of my description. Please note that the wood base is used for display purposes only in the photos. And is not included as a part of this auction. I f you have any questions be sure to ask them before the auction ends. Please don't make assumptions. I only ship within the United States. So no international bidders will be allowed to submit bids. Thank you for viewing my auction. Good luck!
|
|
|
Vintage American Scale # 2 Vise
Up for auction is a vintage American Scale# 2/12 vise. Not exactly sure the year but it appears to be quite old. The vise is in very good shape. There are no cracks or breaks and everything works as it should.
|
|
|
Antique Worth Tool Company Clamp On Table or Bench Vise
This old vise is ready to use or restore! This one came from a home work shop- estate find! Please see pictures for best description! Thank you. Posted with
|
|
|
Vintage Stanley No.700 Woodworkers Vise Clamps On Bench Top 2 1/2" Thick
Up for auction is a Vintage Stanley No.700 Woodworkers Vise clamps on bench top 2 1/2" thick in good used condition. This"L" shaped jaws designed to hold work firmly. Horizontally as well as vertically. Jaw faces covered with tempered presdwood, easily replaceable when worn. Slack-free jaw and screw control insure rigidity and easy operation. The condition shown in the pictures is the actual condition of the item. What you see in the pictures is what you will be receiving. I take many pictures from every angle so that you can accurately view each item. I do this in an effort to ensure that you are satisfied with your item. So please refer to the photos for a more accurate representation of condition.And please if you cannot pay for this item in(3) days please do not bid on this item.I am not responsible for postal damage or ... moreloss, you can request insurance for a fee, so no refunds for this. Thank you for stopping by this auction and will you please take a minute and visit my other auctions.SHIPPING IN U.S.A. ONLY& WILL NOT SHIP TO P.O. BOX"
|
|
|
WILTON Bench Vise Anvil Used LOCAL PICK UP CRESTWOOD KY
YOU ARE LOOKING AT A VINTAGE WILTON VISE SCHILLER PK. ILL. USA IN THESE PHOTOS THE SIZE JAWS OPEN TO 6" JAWS ARE 4" WIDE TOTAL SIZE WHEN OPEN 21" X 6 1/2" BASE see photos for details.Broken piece at the mouth LOCAL PICK UP CRESTWOOD KY any questions? Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Vintage Speedwise Cardinal 6B Bench Vise USED - CRESTWOOD KY PICKUP OR SHIP
YOU ARE LOOKING AT A VINTAGE VISE SPEEDWISE CARDINAL 6B JAW OPENING- 6" JAW DEPTH- 2" JAW WIDTH- 6" OVERALL LENGTH- 15" OVERALL HEIGHT- 3 11/16" WILL SHIP OR LOCAL PICK UP CRESTWOOD KY any questions? Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Vintage Wilton Bench Vise Anvil 101207 01028 Used LOCAL PICK UP CRESTWOOD KY
YOU ARE LOOKING AT A VINTAGE VISE WILTON SCHILLER PK ILL USA IN THESE PHOTOS THE SIZE IS ONE OF THE JAWS IS MISSING(SEE PHOTO) 15" X 11" X 7" LOCAL PICK UP CRESTWOOD KY any questions? Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Vintage Bench Vise Anvil 13-93 Used LOCAL PICK UP CRESTWOOD KY
YOU ARE LOOKING AT A VINTAGE VISE 13-93 IN THESE PHOTOS THE SIZE IS 17" X 15" X 7" LOCAL PICK UP CRESTWOOD KY any questions? Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1451e906664-0x115-
|
|
|
Vintage Globemaster No 5929 Mini Hobby Bench Vise Made in Japan
Vintage Globemaster No 5929 Mini Hobby Bench Vise Made in Japan. Jaws open up to 1 1/4" Everything on this piece moves smoothly.Great for a small vise can be used anywhere! Please atke a look at my pictures. I can only imagine the possibilities! From a pet& smoke free home. Dollar for scale only and not included in this sale. No reserve. PAYPAL PAYMENT ONLY. Payment is due within ten days of auctions end by PayPal. No other payment method will be accepted. If I do not receive your payment within ten days of auctions end I will immediately file a non-paying bidder complaint with eBay. I’m super honest folks and will bend over backwards to work with you on any issues that may arise from our transaction. If you receive your item and for any reason are dissatisfied. Please give me the opportunity to work with you before you start giving ... morenegative feedback…I promise to do the same. No reserve. I have tried my very best to be as honest as possible in representing this item. Please take a good look at the photos and you will see for yourself. I am not an expert in this medium and sometimes it’s just hard to know what a collector will spot for me to be clear on those key details. If you have any questions at all please don’t hesitate to e-mail me. Be as specific as possible. Please note however that I do not check my e-mail every day. I work for a living here folks) so a reply may take a little while…2 days max) All items are sold as it so ask first! Sold as is. Insurance additional at buyer’s request. Sorry I have to print all this stuff but you would not believe some people. I"
|
|
|
Large vintage 26 Pound 4" Jaw Bench Vise 100
Large vintage 26 Pound 4" Bench Vise 100 Jaws open up to 5 3/4" Works fine. 100" is embossed on the side of the vise. There is a label but it is worn making it hard for me to identify the maker. Nice old vise!
|
|
|
IRWIN VISE GRIP 274001 QUICK ADJUST PIPE WRENCH - Free Shipping!!
This is for a gently used Irwin Vise-Grips adjustable pipe wrench. Combines the function of a pipe wrench with an easy to use adjustment slide. Tool has some light surface rust. A few marks on the handle, and is in otherwise great shape. Please see my other listings for more tools. Ready to ship, fast and free! Posted with
|
|
|
Aluminum Drill Press Woodworking Quick Release Vise Made in Germany Wood Tool
Item for sale is(1) Aluminum Drill Press Woodworking Quick Release Vise. Used. But in good condition. Opens and closes smoothly. Shipped FREE in the USA. Check out my! Be sure to add me to your!
|
|
|
vintage workbench with Emmert pattern maker's vise
This classic workbench was made circa 1910 at the Ranken Technical College in St. Louis. Missouri and was used in their pattern making program until that subject was eliminated in the late 1970's. I acquired the bench at that time, eventually moving myself and the bench to New Hampshire. I am now semi-retired and no longer have need or space for it. This very bench was pictured and described in 2 separate books from Taunton Press: The Workshop(2003) and The Workbench(2004) It is. I am told, a very good example of a trade school workbench. It is in good overall condition, but could, no doubt, benefit from some cleaning and tightening. I am struck by the fact that no one ever carved his initials or otherwise defaced the bench. Says something about Ranken, I believe, and the quality of their program, faculty and students. The work surface ... moreis 76 1/2" long and 30" wide including the recessed tool tray. The overall length. With the wooden end vise, is 85 3/4" The maple top is 2 1/2" thick. The height of the bench is 37 1/4" including riser blocks that were added long ago. Bench dog holes are provided in the wooden top as well as both vises. The Emmert pattern maker's vise has jaw dimensions of 14" x 5" This vise will rotate 360 degrees. Tilt up 90 degrees and will accommodate tapered work. One of the jaw set screws for tapered work was broken at some point and it appears a repair was attempted. I'm assuming the repair did not hold because the screw is no longer with the vise. The vise, however, will still hold taper work without any problem. The top is easily removed as are the drawers. Making the bench quite easy to move. Shipping, however, is not an option due to the size and weight.
|
|
|
NICE USED 3/4" HEX PIVOTING HEAD WRENCH, DRILL PRESS TABLE VISE WRENCH
TO ARNDTINC! WE ARE SELLERS WHO HAVE STARTED ANOTHER USERNAME TO SELL PARTICULAR ITEMS. OUR OTHER USERNAMES ARE"SKYNON" 1TO4" WE HAVE A COMBINED TOTAL OF OVER 30.000 POSITIVE FEEDBACKS, SO PLEASE BID ON OUR ITEMS WITH CONFIDENCE! THIS IS A PREVIOUSLY USED WRENCH BY? DRILL PRESS BENCH VISE WRENCH 3/4" HEX 9" LONG HANDLE. 11-1/4" OVERALL LENGTH HAS PIVOTING HEAD QUALITY MADE TOOL THAT WORKS JUST GREAT! HAS WEAR FROM NORMAL USEAGE.HAS NOT BEEN ABUSED.NOTHING BROKEN OR MISSING
|
|
|
Wells 8M Horizontal Band Saw, 8" x 12", Coolant, Angle Vise, 4 Speeds, 120V
From a Aeronautics Company in Minneapolis that recently cloosed I have for sale a Wells Horizontal Band Saw Model No. 8M Serial No. 18116 8" Rounds Capacity 8" x 12" Capacity 3/4" Blade 45 Degree Vise 9" In-feed Table Weighted Feed Rate Coolant Tank and(NON WORKING PUMP) 4-Speeds 120V Electric Overall Dimensions 72" x 36" x 48" and Approx 1.000 lbs I can provide a shipping quote. If you need item palletized I can provide for additional fee. Contact us if you have any questions 612-564-3726.
|
|
|
Atlas/Craftsman 6" Metal Lathe Milling Vise Jaws
This is a nice set of jaws for a milling attachment. No shipping outside of the United States.
|
|
|
Kurt Vise 6" Single Used
Kurt 6" vise. Good working condition, no dents, D675-45927 smooth vise action. Can take more pictures or give more details. Posted with
|
|
|
4" CAPACITY CORNER RIGHT ANGLE WELDING SET UP VISE
4" CAPACITY CORNER RIGHT ANGLE WELDING SET UP VISE Click Images to Enlarge 4" CAPACITY CORNER RIGHT ANGLE WELDING SET UP VISE COMES AS SHOWN IN PHOTOS NEEDS JAWS MEASURES: 12" x 17" x 9" WEIGHT: 14 LBS ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 15 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 ... moreHandling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. PLEASE NOTE A RESTOCKING FEE MAY APPLY Please contact us if you would like to pick up your items. Note your items may be shipped out via Fedex Ground. UPS Ground or USPS Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) RESTOCKING FEES MAY APPLY ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not
|
|
|
Grand 5" MILLING MACHINE VISE W/ 360 Degree Swivel Base Made In Germany / German
Up for sale is a used 5" Grand Milling Machine Vise with a 360 degree swivel base. It is in good working condition- see photos. The model tag indicates that it was made in Germany. Note: We do not have the handle for it) TERMS: Payment is to be received within 7 days of auction end. Please email any questions before bidding. All sales are final. Payment via PayPal or contact buyer to arrange alternate payment method. Buyer pays actual shipping(see shipping calculator) Illinois residents will be charged 7% sales tax. We will only ship to the continental US.
|
|
|
Rocker for Clamping Tapered or Out of Parallel Parts in Vise
800x600 800x600 Rocker for clamping tapered or out of parallel parts in vise. 3” wide. No manufacturer’s marking. Good used condition; does have name engraved. Buyer to pay shipping on 1 pound. I will gladly combine items for lowest cost shipping. I accept PayPal and other reasonable methods of payment. Please check out my other auctions for more tooling and tool bargains. Thanks Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4
|
|
|
WILTON VISE WILTON 500 VISE MONSTER VISE #10051 BULLET VISE
WILTON YOU ARE LOOKING AT A WILTON 500 VISE. THIS IS A MONSTER OF A VISE AND WEIGHS AROUND 80 POUNDS. IT HAS 5' JAW ON IT. THIS VISE DOES HAVE A SWIVEL BASE BUT ONE OF THE TIGHTENERS WILL NOT LOOSEN. ALSO THE DUST COVER IS MISSING ON THE END. IF YOU HAVE ANY QUESTIONS PLEASE ASK SELLER AND SHIPPING WILL BE TO THE LOWER 48 STATES ONLY. THANKS FOR LOOKING.
|
|
|
DUNLAP 2-3/8" JAW PRECISION MACHINIST VISE
Dunlap Precision Machinist Vise 2-3/8" x 1-3/8" Jaws 3" Max Opening Model No. 7545 Base Measures 8-1/8" Overall No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction ... moreend notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
2-1/2" JAW PRECISION MACHINIST VISE
Precision Machinist Vise 2-1/2" x 1-1/2" Jaws 2-1/2" Max Opening Base Measures 6" Overall No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you ... morepay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
,MACHINIST PRECSION VISE - 3" WIDE
YOU ARE LOOKING AT A VERY NICE PRECISION MACHINIST VISE. IT MEASURES 3" WIDE BY 9" LONG. IT IS IN GOOD WORKING CONDITION.
|
|
|
(2) KNO-VISE H-600 HOLD DOWN CLAMPS
2) KNO-VISE HOLD DOWN CLAMPS#H-600, GOOD CONDITION. PLEASE CALL KEN WITH QUESTIONS. WE ARE A FULL LINE MACHINE TOOL DISTRIBUTOR. 800-756-7283#5684 2# WE SELL AND SHIP INTERNATIONALLY! PLEASE PAY WITH PAYPAL FOR FAST SHIPPING! WE DO NOT ACCEPT PERSONAL/BUSINESS CHECKS AS PAYMENT. WE SHIP OUR ITEMS VIA UPS GROUND. WE WILL LEAVE POSITIVE FEEDBACK UPON RECEIPT OF PAYMENT. WE JUST ASK THAT YOU DO THE SAME FOR US. THANK YOU! GOOD LUCK BIDDING! We stand behind all the products that we sell. If you are not satisfied with the item you have purchased. Please contact us BEFORE you leave feedback so we can work it out. If you post negative feedback before you contact us. The item is yours to keep. Thank you. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Vtg Petersen & Channellock Vise-Grip Lot - 20R Chain, 7R Pliers, 950 Tog-L-Lok
Vtg Petersen& Channellock Vise-Grip Lot- 20R Chain. 7R Pliers, 950 Tog-L-Lok This is for a vintage Petersen and Channellock vise-grip style pliers lot from a local estate. I took alot of pictures so you could see what's included and everything's condition so please look at them closely. They all have wear from use and staining/spotting including rust spots from storage(the Channellocks especially have alot of surface rust) But overall they are all in good working condition. Listed below are the tools included: Petersen No. 20R chain wrench, Petersen No. 7R, Channellock No. 950 tog-l-loc, If you have any questions. Please let me know. Thanks for looking and God Bless! Winning Ohio bidders are responsible for a 8.0% Ohio Sales Tax. International auction winners are responsible for knowing and payig any applicable duty.
|
|
|
2 Vise Grip 8R Sheet Metal Locking Clamps
This auction is for 2 Vise Grip 8R Sheet Metal Locking Clamps. They are in fair used condition. Have scratches. Light rust, dirt, and ware throughout. Handles are intact and clamps do lock. They have some rust to the metal. Both are marked. One has alot more ware then other one. The edge on one has cracks to metal and edge is not straight. Edge is 3" I will combine shipping. Theses are AS IS! What you see is what you get. Please view pics carefully. I am not accepting or offering buy it now pricing. I require payment within 4 days, or a claim will be filed with ebay. I do not ship internationally. I also require insurance to be paid by buyer on all standard post mail items reguardless of item cost, and on all priority mail items over $50.00, or else item will not be shipped. I ship to address provided and verified by paypal at the time ... moreof payment, so if address differs, item will NOT be shipped. So please make sure your address is current! Please view my other auctions for other vintage items. Feel free to email with questions or for more pics before auction ends. I will not reply to any questions concerning items condition or specifics after auction has ended! Happy Bidding! ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14523f5e0e6-0x10f-
|
|
|
SUBURBAN TOOL SV-337-S2 SINE VISE 11L 4"W 4-5/8"H
SUBURBAN TOOL SV-337-S2 SINE VISE 11L 4"W 4-5/8"H NOTE: WE ALWAYS COMBINED SHIPPING WHEN POSSIBLE! CALL 781-440-0983 FOR MORE INFORMATION
|
|
|
SUBURBAN TOOL SV-337-S1 SINE VISE 7-1/2L 3"W 3-5/8"H
SUBURBAN TOOL SV-337-S1 SINE VISE 7-1/2L 3"W 3-5/8"H NOTE: WE ALWAYS COMBINED SHIPPING WHEN POSSIBLE! CALL 781-440-0983 FOR MORE INFORMATION
|
|
|
Chick 6" Double Vise Used Qty 2
Chick brand 6" double vise. Qty 2 In good working condition. All 4 jaws move smoothly. Needs to be cleaned up. Selling as is. Will sell as a pair or separately for half. Inquire about either option. Posted with
|
|
|
BROWN & SHARPE NO. 2 MACHINIST 5" VISE
Brown& Sharpe Machinist Vise Model No. 2 5" x 1-1/4" Jaws 2-3/4" Max Opening Measures 12-1/4" x 5" Overall No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction ... moreend notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
Wilton Vise 4 inch jaws Free Shipping !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
You are bidding on a used Wilton Vise. It has been taken apart cleaned and repaint. It is in good working condition. The date code says 1972. Check out my other auctions for good deals. Buyer pays shipping. We will combind shipping. We have other parts for John Deere A. B, H, M, MT, MC, L, LA, LUC,40,50,420,430,440 and 1010. If you don't see it in are store ask us and we can list it. I can be reached at(856)358-2444. Please check our eBay Store for other Farm Tractor Parts. Please ask questions before bidding to make sure this item is suitable for your use. This item is used- sold"as is" without warranty. Shipping: We will ship this item UPS. Buyer pays shipping charges. Shipping weight 50 lbs. Payment Terms: This item must be paid within 7 days of auction close. If you are picking it up you must do so within 30 days of auction ... moreclose. Storage is at your own risk after 30 days. Sales Tax: Items shipped to an NJ address: 7% Items picked up at our shop: 7% even if you do not live in NJ. Exceptions for valid. Signed sales tax certificate AND copy of you authority to collect sales tax Items shipped to states other than NJ: no tax
|
|
|
VINTAGE WILTON 5" TRIPLE DUTY UTILITY BENCH VISE QUICK SLIDE TYPE
QUICK ACTION STYLE.JAWS A LITTLE SMOOTH BUT OTHERWISE A GOOD USABLE VISE. ALL QUESTIONS WELCOMED BEFORE BIDDING*PLEASE NOTE*I AM NOT AN EXPERIENCED MACHINIST AND MOST OF THESE ITEMS HAVE BEEN ACQUIRED FROM A RETIRED MACHINIST AND MAY NEED CLEANING.MAY HAVE SOME PITTING OR LIGHT SURFACE RUST,MAY BE INSCRIBED WITH INITIALS& S,REGROUND OR ALTERED,MAY NEED FURTHER METICULOUS CLEANING,MAY NOT BE FULLY ACCURATE AND MAY BE CHIPPED.NEED SHARPENING AND MAY HAVE DUPLICATE SIZES BUT MOST ITEMS SHOULD BE USABLE(UNLESS OTHERWISE INDICATED)AND GOOD FOR AN APPRENTICE OR A SECOND TOOL TRAY AROUND THE LATHE OR MILL OR FOR THE BASEMENT NIGHT SHOP*PLEASE FEEL FREE TO ASK ANY QUESTIONS ABOUT SIZES OR CONDITION OR ANYTHING AND PLEASE CHECK OUT MY OTHER CUTTING TOOLS,TOOLING,TOOL HOLDING,COLLECTIBLES AND OTHER USABLE STANLEY STARRETT,BROWN& SHARPE,LUFKIN ... moreETC MACHINIST'S TOOLS AND OTHER TRADE TOOLS& EQUIPMENT BY CLICKING BELOW OR ABOVE ONTO"VIEW SELLERS OTHER ITEMS"Please Check out my! NOTE*MORE TOOLS AND STUFF FOR AUCTION IN UPCOMING WEEKS*NOTE*AS ALWAYS MULTIPLE PURCHASES WILL DECREASE ALREADY LOW SHIPPING COSTS.PLEASE READ BELOW* IF YOU WOULD LIKE TO CARRY OVER A PURCHASE FROM ONE WEEK TO THE NEXT TO SAVE SHIPPING THAT'S FINE BUT I WILL REQUIRE PAYMENT ONLY ON ITEMS PURCHASED WHILE HOLDING TO KEEP MY EBAY UP TO DATE.THANK YOU FOR YOUR UNDERSTANDING* INSURANCE MAY BE REQUIRED ON SOME PURCHASES* ALERT*SAVE MONEY $$$$$$$$$$ ESPECIALLY TO COMBINE SHIPPING ON MULTIPLE PURCHASED ITEMS IF ITEM(S) FIT IN THE SMALLEST USPS PRIORITY FLAT RATE BOX OR ENVELOPE I WILL SHIP IT FOR $5.75(UNDER 4 POUNDS)A MEDIUM FLAT RATE PRIORITY BOX $11.00. LARGE FLAT RATE PRIORITY BOX $16.00.IN USA ONLY $$$$$$$$$$$$$$ $$$$$$$$$$$$$$$$$$$$$$SAVE.SEE USPS ON LINE FOR BOX SIZES*FOLD OUT RULER PICTURED NOT INCLUDED AS AN ITEM IN THE LOTS.FOR REFERENCE ONLY* Posted with the
|
|
|
Huge Wilton 646 Bench Vise 6" Jaw Width, Swivel Base, Anvil 65 lbs USA
Works good. Jaws are 6" wide. jaw teeth are excellent. has pipe jaws also. Made in USA. No damage. INSURANCE INCLUDED IN SHIPPING COSTS Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
WILTON (1 PR.) 404-4 COPPER VISE JAWS - FACES - 4" INCH
WILTON(1 PAIR) 404-4- 4" COPPER BENCH VISE JAWS IN EXCELLENT USED CONDITION. BOTH STAMPED- 903605. 404-4, WILTON CORP. PALATINE IL. U.S.A.
|
|
|
Vise Jaw Plates With .295W x .397W Step Per Side (Pair)
2-7/8" Long Vise Jaw Plates 1-3/4"H x 1/2"W.This pair has a single step that is.295W x.397D.Condition is very good
|
|
|
3 milling vise handles
up for sale 3 milling machine vise handles or drill press vise.heavy duty 3/4 square.1 inch square and and a hex that is 3/4 across flatsCHECK MY OTHER AUCTIONS AS I AM LIQUIDATING MACHINE SHOP TOOLS FROM MY CLOSED SHOP.LOTS TO, SELL AND WILL BE LISTING FOR THE NEXT FEW MONTHS.wILL COMBINE WINNINGS TO SAVE $ OR WILL CRAME AS MUCH AS I CAN IN A FIXED RATE PRIORITY BOX.THANKS AND BID AWAY.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14523f681d0-0x105-
|
|
|
WILTON INDUSTRIAL VISE 10" OPENING
Wilton industrial size vise. 10" opening. I bought this but it is just WAY too big for the small jobs I do. Compare at $750-$900. In excellent condition. Never bolted down. Around 150 pounds so I'm not shipping it. Local pick-up only. Payment is expected within 48 hrs either by cash at pick-up or through Paypal. Item will be relisted and turned over to Ebay. if this is not done. Item is located about 30 miles west of Atlanta. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14523f68685-0x10a-
|
|
|
Vise Jaw Plates With .269W x .405D Step Per Side (Pair)
Vise Jaw Plates 2-7/8" Long x 1-3/4" High x 1/2" Wide.This pair has a single step that is.172W x.402D per side.Condition is fair with some wear on the edges.
|
|
|
SWIVEL BASE FOR MILLING MACHINE FLAT VISE FITS KURT D60 / D675 ETC
SWIVEL BASE FOR MILLING MACHINE FLAT VISE FITS KURT D60/ D675 ETC Click Images to Enlarge SWIVEL BASE FOR MILLING MACHINE FLAT VISE FITS KURT D60/ D675 ETC WEIGHT: 24 LBS MEASURES: 13" x 12" x 2" ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 26 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will ... moreapply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. PLEASE NOTE A RESTOCKING FEE MAY APPLY Please contact us if you would like to pick up your items. Note your items may be shipped out via Fedex Ground. UPS Ground or USPS Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) RESTOCKING FEES MAY APPLY ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We of
|
|
|
PALMGREN UNIVERSAL QUICK ACTION 4" VISE
PALLGREM UNIVERSAL QUICK ACTION 4" VISE Jaws: 4 X 1 1/2" Opening: 4 1/2" OAL: 12" Comes as Shown* Discounted Shipping available on Items Must Send invoice Request* Need something. Don't see it listed? Drop us a line@ RandC.auctions@gmail.com* If item is not paid within SEVEN days it will be relisted* The max number of days we will hold items for you is 3 days*
|
|
|
Kurt 4" Innerlock Vise Jaw With .105W x .154D Step Per Side (Pair)
Kurt Innerlock Vise Jaws 4" Long x 1.40" High x 1" Wide.Fits Kurt and other comparable 4" vises.Jaws come with 4 each lock bolts and can be tightened through the face of the jaws.This pair has a single step that is.105W x.154D per side
|
|
|
Kurt 4" Innerlock Vise Jaw With .156W x .156D Step Per Side (Pair)
Kurt 4" Innerlock Vise Jaws 4" Long x 1.40" High x 1" Wide.Fits Kurt and other comparable 4" vises.Jaws come with 4 each lock bolts and can be tightened through the face of the jaws. This pair has a single step that is.156W x.156D per side
|
|
 |