In 
 
Order by: 
Available to: 
Price: 
 - 
$
70.01
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Product Description These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well ... moreas round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face. This vise features a jaw opening scale and rotation scale. The jaw opening scale is used to approximate the jaw opening size while the rotation scale provides approximate angle readings through 180-degrees. Features Rotating jaws Rotating base Jaw opening scale Rotation scale Base locking lever .
$
139.99
Buy It Now
Free Shipping
Condition: New
Location: Redlands, United States
Stable Bench Vise: It is easy to install on your bench, simple and features with 3 fixed mounting tabs to help secure the bench vise on the table. Strong ... moreIron Construction: The 5" bench vise features with a solid gray iron construction, more durable and harder than others bench vise that made of ordinary materials.
$
102.04
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point ... moreholding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" UPC Does not apply Brand Thomletha Base Motion Type Swivel Jaw Width 6 in Jaw Opening Capacity 5-1/4 in Material Cast Iron MPN GM602920.
$
139.99
Buy It Now
$22.49 Shipping
Condition: New
Location: Fort Mill, United States
This professional quality Klutch Multi-Purpose Bench Vise has a 360 degree swivel base, allowing you to work at any angle. Features pipe jaws and replaceable ... morejaws. Jaw Width in. 1, Pipe Jaw Yes, Do.
$
7.69
Buy It Now
$2.99 Shipping
Condition: New
Location: Perth Amboy, United States
This Table-top clamping vise is well made, functional and yet economical. Mini Vise body is made of Cast Aluminum, a handy miniature Vise. Vise is durable, ... moreLight weight,and it a very portable tool. This Table-top clamping vise is well made, functional and yet economical.
$
25.95
Buy It Now
Free Shipping
Condition: New
Location: Vancouver, United States
Description: Automatic gripping jaws work just like the Right Angle Clamp. But the jaws are turned 90°, making them just the ticket for face frame ... moreconstruction. No more three handed holding while working with pipe and bar clamps, the Face Frame Clamp allows you to work with just one joint at a time. And since it applies pressure in-line with the joint, glue slipping is also a thing of the past. Super strong construction for years of dependable service. For 3/4" stock. Specifications: 3/4" Capacity Non Marring Pads SHIPS SAME DAY IF PAID FOR BY 4PM PST Payment: We prefer You may pay instantly with PayPal by clicking the pay now button at the top. Return Policy: NO QUESTIONS ASKED! You may return the product within 30 days of receipt. Item must be returned in new condition. As received with all accompanied accessories and literature, including the factory carton. Shipping, handling is not refundable unless item is returned because of defect. If item is found defective return shipping will be refunded to the buyers paypal account once the item is verified defective. Buyer is responsible for return shipping costs and logistics for all returned items that are not defective. You must contact us within 30 days of receipt, to request an RMA number. Items received without an RMA number, will be refused and returned to the sender. Terms: Buyer assumes all risk of liability with respect to the purchase and use of the product/item. All of our pictures are photos of actual items. Colors or packaging of items delivered may vary from those photographed Payment is expected within 7 days of auction close. We cannot guarantee availability of product if we do not receive payment within 7 days. Shipping: Free shipping to the all of USA unless otherwise stated. Shipping discounts for multiple items will be done on a case by case basis for international buyers. WE SHIP FASTER and SAFER THAN MOST SELLERS JUST CHECK OUT OUR FEEDBACK! We stock all available items. And we ship from our warehouse. Most orders are shipped the
$
89.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
Why Choose VEVOR?. Our vise has to roughen screw rod, solid casting, and strong clamping force. It can ensure the stability of clamping multiple workpieces. ... morePrecision milling vise is the main accessory of precision milling machine and NC/CNC machine tool.
$
41.99
Buy It Now
Free Shipping
Condition: New
Location: Long Beach, United States
BENCH PIPE VISE YOKE HINGED CLAMP ON TYPE PLUMBING PIPE HOLDING TOOLS #2. Yoke is made of self-locking hinge construction. Pipe jaws are made of hardened ... moretool steel. 3" Max Outside Pipe Capacity. We will not fulfill orders where the information does not match.
$
63.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
【WIDE APPLICATION】- Precision milling drilling vise, suitable for milling, drilling machine, and precision parts finishing. Swiveling vise features with ... morethe perfectly aligned precision jaw. Maximum clamping force of 15 KN.
$
89.99
Buy It Now
Free Shipping
Condition: New
Location: Pottstown, United States
30,000 PSI Cast Grey Iron with Steel U Channel Bar360° Swivel Base with (2) LockdownsReplaceable Hardened Steel Serrated (Top) JawsPermanent Serrated ... morePipe JawsLarge Pipe Jaw CapacityLarge Anvil Work SurfaceNo Pinch Main Screw HandleCancer and Reproductive Harm - https://www.p65warnings.ca.gov
$
45.00
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Heavy Duty 5" Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Steel Serrate steel jaws Oversized striking anvil Heat treated ... moreshaft 3 Down slots 360° Double locking swivel base Precision crafted and designed to provide dependable service and satisfaction Industrial quality Heavy duty cast steel construction Hardened and polished replaceable jaws and large anvil Swivel base allow you to get the angle on your workpiece*FREE SHIPPING COST TO THE LOWER 48 STATES ONLY COLOR MAY VARY PAYPAL VERIFIED AS OF 2002 We only accept PayPal. If paying with PayPal please wait for your payment information to update. DO NOT CLICK'PAYMENT SENT' if you are paying with PayPal. This makes it difficult to find your payment information and will delay shipping time. Most items are eligible for a shipping combination. These items must be paid for together. And recieve a 20% discount off total shipping costs. Please wait to receive your combined invoice, do not go through checkout until your combined invoice has been sent! Please note that it is the buyer's responsibility to maintain their shipping address updated. Items will be shipped to the address registered as the shipping address with Ebay/and-or/Paypal at the time of payment. Any updates to the shipping address must be made prior to payment. WE DO NOT ALLOW PICKUPS. NO PICKUPS. NO EXCEPTIONS. We do not ship to unregistered addresses. Your address must be registered with both Ebay and Paypal. We DO offer shipping to PO Boxes. However all shipments to PO Boxes must be made through USPS. If you require shipping to a PO Box you must pay using the USPS shipping option. It is the buyer's responsibiity to receive the package. Or pick it up from the carrier's location. If a package is returned to us because the Buyer failed to pick it up, or receive it then they will be issued a refund for the Purchase Price of the item, not including Shipping And Handling Costs and minus both a 15% restocking fee and return shipping costs. Most of our shipm
$
109.89
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
Better Values Friendly Service Fast Shipping BRAND NEW 6" ACCU Lock Vise Unit overall dimension: 18/14" x 9" x 10" Jaw Width: 6" ... moreJaw Opening: 5.9" Jaw Height: 1-3/4" Accurate to.002" on parallelism and Squareness Each pound of force in horizontal induces 1/2 lb of downward force. Eliminating jaw tilt Sliding surface of the vise bed is flame hardened and ground Unit approx. weight: 53 lbs Quantity: 1 Shipping FREE SHIPPING in lower 48 States. Additional charge applies to APO. AK, HI, GU, PR, and VI addresses. Please contact seller for additional information. All items will be shipped Ground Service. Payments Paypal payment only please. Buyer can use MasterCard. Visa, Discover and American Express through Paypal. It is Safe, Fast& Reliable. In all cases payment is expected within 7 days of sale date. Contact Info We are here to help. If you have any questions or concerns regarding your purchase, please feel free to contact us at any time using the eBay messaging system. Please allow 24 to 48 hours to receive a response. We will do our best to answer all your questions as soon as we can. Policy All purchases come with a 14-days money back guaranteed. SHIPPING IS NON REFUNDABLE. NO EXCEPTIONS. Buyers are responsible for all postage fees on return. All Returns must have RMA(Return Authorization Number) issued from Seller or package will be refused.
$
57.96
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
Adjustable vise jaws can clamp the objects in different sizes tightly. 1x Bench vise. 360 degree Swivel Locking base ideal for turning in any direction ... moreas desire after mounting. Clamp height :65MM. Material: 45#Steel+cast iron.
$
70.04
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Description: Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise Swivel Multipurpose ... moreBench Vise A 4-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It features with swivel head and base and can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material.
$
588.06
Buy It Now
Free Shipping
Condition: New
Location: United States
FOR YOUR CONSIDERATION IS A RIDGID TOOL BC-210 BENCH CHAIN PIPE VISE AND BENDER. THIS VISE WILL HOLD PIPE FROM 1/8" TO 2-1/2" AND CAN BE USED ... moreTO BEND STANDARD PIPE UP TO 1/2" THE VISE IS USED BUT IN EXCELLENT CONDITION. DON'T LET THIS ONE GET AWAY!
$
102.02
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point ... moreholding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" UPC Does not apply Brand Handdo Base Motion Type Swivel Jaw Width 6 in Jaw Opening Capacity 5-1/4 in Material Cast Iron MPN 617993.
$
129.99
Buy It Now
Free Shipping
Condition: Open box
Location: Paramount, United States
Can also be used as a conventional drill press vise item drill press vise. Jaw Width: 4". Type cross slide base type swivel 360 degree. Max Opening: 3-1/2". ... moreThroat Opening: 1-3/8".
$
199.99
Buy It Now
$22.80 Shipping
Condition: Seller refurbished
Location: Brighton, United States
Drill Press/Machinists Vise. This is a LARGE vise, body is about 13.5" long x 8.75" wide. Made by Reed MFG. Weighs 26 Lbs. Erie, PA USA. Ready to work. ... moreLOOK AT ALL THE PHOTOS AND USE THE ZOOM FEATURE.
$
98.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
【MULTIFUNCTIONAL TOOL】 - Jaw Width: 4" (100 mm), Jaw Opening: 4.7" (120 mm). Milling Vise is an essential tool for fitters. Precision milling vise is ... morethe main accessory of precision milling machine and NC/CNC machine tool.
$
9.79
Buy It Now
Free Shipping
Condition: New
Location: Walton, United States
2 PCS Bench Vise Jaw Grip Objects and Fits Most Vises. Waffle Grip Anti-Slip Adds More Grip Points. Otherwise deal is final. Strong Embedded Magnets Keep ... moreInserts Securely in Place. All products are quality checked.
$
40.49
Buy It Now
$4.50 Shipping
Condition: New
Location: Ontario, United States
1x Bench Vise. Jaw Width: approx. [Big Striking anvil] Oversized striking anvil make the operation easy, knock resistant, durable.
$
70.50
Buy It Now
Free Shipping
Condition: New
Location: Rosemead, United States
HD 4' Swivel Base Milling Vise Descriptions: Brand New Heavy duty 4' swivel base milling vise Jaw width: 4' Jaw depth: 1-3/8' Jaw opening: ... more3-1/8' Feature: ruler measurement on the side of the base Parallelism and squareness: 0.01"4" Overall dimension(closed jaw and handle pointing up) 3-3/4'L x 11'W x 10-1/4'H Unit weight: 20 lbs Quantity: 1 We respond to ALL EMAILS. Should you have any issues or questions regarding any item please contact us first before leaving NEUTRAL or NEGATIVE FEEDBACK. You will receive a response within 24 hours. If you don't receive the respond email. Please check your SPAM/JUNK email folder. WE ARE CLOSED ON THE WEEKENDS. FeedBack: If you are considering leaving negative or neutral feedback. Please give us the opportunity to resolve the issue first. Thank you for your consideration Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* California residents only* sales tax will be added at check out. Shipping and Handling to Lower 48 States: FREE SHIPPING Ground Service. Excluding PO BOX. APO, HI, AK, PR and GU. Additional shipping charge applies to APO. AK, HI, GU, PR and VI, addresses. Please contact seller prior to placing the order. Shipping To Canada: $130.00(1st unit) + $65.00(each additional) Ground Service. International Buyers are respond for all Brokerage. Tax and Duty fees. Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* All prices in U.S. Currency. For Credit Card payments please use Paypal. We can only ship to your Paypal specified ship to address. No exceptions. Payment must be received within 7 days or a Non Paying Bidder Alert will be filed. Return Policy: In-Order for us to Provide FREE SHIPPING. All Returns Are Subject to a 15% Restocking. Buyers have 72 hours to inspect item for damages and must contact the seller immediately if shipping damage is discovered. All returns required a
$
240.50
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Better Values Friendly Service Fast Shipping BRAND NEW 6" ACCU Lock Vise Unit overall dimension: 18/14" x 9" x 10" Jaw Width: 6" ... moreJaw Opening: 5.9" Jaw Height: 1-3/4" Accurate to.002" on parallelism and Squareness Each pound of force in horizontal induces 1/2 lb of downward force. Eliminating jaw tilt Sliding surface of the vise bed is flame hardened and ground Unit approx. weight: 53 lbs Quantity: 1 Shipping FREE SHIPPING in lower 48 States. Additional charge applies to APO. AK, HI, GU, PR, and VI addresses. Please contact seller for additional information. All items will be shipped Ground Service. Payments Paypal payment only please. Buyer can use MasterCard. Visa, Discover and American Express through Paypal. It is Safe, Fast& Reliable. In all cases payment is expected within 7 days of sale date. Contact Info We are here to help. If you have any questions or concerns regarding your purchase, please feel free to contact us at any time using the eBay messaging system. Please allow 24 to 48 hours to receive a response. We will do our best to answer all your questions as soon as we can. Policy All purchases come with a 14-days money back guaranteed. SHIPPING IS NON REFUNDABLE. NO EXCEPTIONS. Buyers are responsible for all postage fees on return. All Returns must have RMA(Return Authorization Number) issued from Seller or package will be refused.
$
24.95
Buy It Now
Free Shipping
Condition: New
Location: North Hollywood, United States
Table-top clamping vise is well made, functional and yet economical. VISE FOR BENCH - TABLETOP 3". 360 ° SWIVEL VISE WITH CLAMP. - Vise Jaws Opens: 2" ... more- 50mm (With Rubber Jaw Insert). - Vise Clamp Opens: 2-1/8" - 53.5mm.
$
58.59
Buy It Now
$12.99 Shipping
Condition: New
Location: Perth Amboy, United States
Adjustable vise jaws can clamp the objects in different sizes tightly. 1x Bench vise. 360 degree Swivel Locking base ideal for turning in any direction ... moreas desire after mounting. Clamp height :65MM. B rand new and high quality Cast steel construction,Durable and wear-resistant.
$
55.99
Buy It Now
Free Shipping
Condition: New
Location: Long Beach, United States
# 3 YOKE PIPE VISE HINGED CLAMP ON TYPE PLUMBING TOOLS PORTABLE BENCH TYPE. Yoke is made of self-locking hinge construction. Pipe jaws are made of hardened ... moretool steel. 3-1/2" MAX OUTSIDE PIPE CAPACITY.
$
18.72
Buy It Now
Free Shipping
Condition: New
Location: Mesa, United States
This is a new table top vise. It can rotate 360 degrees and can be locked into position. Bench mounting for benches up to 35mm thick. This item includes.
$
105.99
Buy It Now
Free Shipping
Condition: New
Location: Pottstown, United States
30,000 PSI Cast Grey Iron with Steel U Channel Bar360° Swivel Base with (2) LockdownsReplaceable Hardened Steel Serrated (Top) JawsPermanent Serrated ... morePipe JawsLarge Pipe Jaw CapacityLarge Anvil Work SurfaceNo Pinch Main Screw HandleCancer and Reproductive Harm - https://www.p65warnings.ca.gov
$
84.02
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
BATTERIES. TOOLS& MORE CONTACT US WARRANTY INFO ▫▫ Air Tools ▫▫ Air Riveters ▫▫ Air Saws& Blades ▫▫ Compressors& Tanks ▫▫ Grease Guns ▫▫ Grinders& ... moreGinding Discs ▫▫ Hammers. Drills& Screwdrivers ▫▫ Hopper Texture Guns ▫▫ Hoses. Reels& Accessories ▫▫ Nail Guns& Nails ▫▫ Paint& Spray Guns ▫▫ Punch Flange Tools ▫▫ Sand Blasters ▫▫ Sanders ▫▫ Sockets. Ratchets& Impacts ▫▫ Automotive ▫▫ Accessory Lights ▫▫ Air Compressors& Portables ▫▫ Air Horns ▫▫ Auto Body& Frame ▫▫ Auto Maintenance& Care ▫▫ Diagnostic Tools ▫▫ Electrical. Wiring& Testers ▫▫ Jacks. Engine Stands& Hoists ▫▫ Specialty Tools ▫▫ Tie Downs ▫▫ Tires& Wheels ▫▫ Truck. Trailer& Accessories ▫▫ Batteries ▫▫ 12 Volt SLA Batteries ▫▫ 12AH SLA Batteries ▫▫ 17 18 20 AH SLA Batteries ▫▫ 32 33 34 35 AH SLA Batteries ▫▫ 4 4.5 5 AH SLA Batteries ▫▫ 7 7.2 7.5 8 AH SLA Batteries ▫▫ 9 10 AH Batteries ▫▫ Misc. 12V SLA Batteries ▫▫ 6 Volt SLA Batteries ▫▫ 10. 12 AH SLA Batteries ▫▫ 4. 4.5, 5 AH SLA Batteries ▫▫ APC Computer Back Up Batteries ▫▫ Motorcycle Batteries ▫▫ 12N12A-4A-1 ▫▫ 12N12A-4A-1 AGM ▫▫ 12N14-3A ▫▫ 12N7-3B ▫▫ 12N9-4B-1 ▫▫ 12N9-4B-1 AGM ▫▫ 6N2-2A ▫▫ 6N2A-2C ▫▫ 6N4-2A ▫▫ 6N4B-2A ▫▫ 6N5.5-1D ▫▫ 6N6-1B ▫▫ 6N6-3B ▫▫ 6N6-3B-1 ▫▫ B54-6 ▫▫ YIX30L ▫▫ YT12B-BS YT12B-4 ▫▫ YT14B-BS YT14B-4 ▫▫ YT7B-BS YT7B-4 ▫▫ YT9B-BS YT9B-4 ▫▫ YTX12-BS ▫▫ YTX12A-BS ▫▫ YTX14-BS ▫▫ YTX14AH-BS ▫▫ YTX14AHL-BS ▫▫ YTX14L-BS ▫▫ YTX16-BS-1 ▫▫ YTX20-BS ▫▫ YTX20L-BS ▫▫ YTX24HL-BS ▫▫ YTX4L-BS ▫▫ YTX5L-BS ▫▫ YTX7A-BS ▫▫ YTX7L-BS ▫▫ YTX9-BS ▫▫ YTZ10S ▫▫ YTZ12S ▫▫ YTZ14S ▫▫ YTZ7S ▫▫ NiCd Batteries ▫▫ AA NiCd Button Top Cells ▫▫ Sub C NiCd Cells w/Tabs ▫▫ Optima Blue Top Batteries ▫▫ Optima Red Top Batteries ▫▫ Optima Yellow Top Batteries ▫▫ Other Batteries ▫▫ Power Wheel Batteries ▫▫ Replacement for GREEN Battery ▫▫ Replacement for RED Battery ▫▫ Replacement Dewalt Batteries ▫▫ 12 Volt Dewalt Replacements ▫▫ 14.4 Volt Dewalt Replacements ▫▫ 18 Volt Dewalt Replacements ▫▫ 24 Volt Dewalt Replacements ▫▫ 9.6 Volt Dewalt Replacements ▫▫ Rep
$
70.09
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description: Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise Swivel Multipurpose ... moreBench Vise A 4-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It features with swivel head and base and can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material.
$
58.29
Buy It Now
Free Shipping
Condition: New
Location: Azusa, United States
[ANY ANGLE]: When the jaw is tightened, the vise rotates throughout 360 degrees and then locks at any angle. [POSITION OF CLAMPING]: It is able to clamp ... morein both upright and horizontal positions.
$
66.49
Buy It Now
Free Shipping
Condition: New
Location: Rialto, United States
Quality Self Centering Vice Vise For Drilling/ Milling Machine Hardened Jaws with Horizontal / vertical Vee for Holding Round Jobs Intact. aximum Jaw ... moreOpening 55 mm, Jaw Depth 28 mm. QUALITY SELF CENTERING VICE VISE-ENGINEERING TOOLS -FIXED BASED-RIGID & TOUGH QUALITY ((JAW WIDTH 50 MM)).
$
24.99
Buy It Now
$12.50 Shipping
Condition: Used
Location: Albuquerque, United States
For sale is a used Pana Vise head assembly with rubber jaws. Vise is fully functional except it is missing its base. Can be mounted in anything that fits ... morea 5/8" OD rod.
$
74.79
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
Better Values Friendly Service Fast Shipping BRAND NEW 6" ACCU Lock Vise Unit overall dimension: 18/14" x 9" x 10" Jaw Width: 6" ... moreJaw Opening: 5.9" Jaw Height: 1-3/4" Accurate to.002" on parallelism and Squareness Each pound of force in horizontal induces 1/2 lb of downward force. Eliminating jaw tilt Sliding surface of the vise bed is flame hardened and ground Unit approx. weight: 53 lbs Quantity: 1 Shipping FREE SHIPPING in lower 48 States. Additional charge applies to APO. AK, HI, GU, PR, and VI addresses. Please contact seller for additional information. All items will be shipped Ground Service. Payments Paypal payment only please. Buyer can use MasterCard. Visa, Discover and American Express through Paypal. It is Safe, Fast& Reliable. In all cases payment is expected within 7 days of sale date. Contact Info We are here to help. If you have any questions or concerns regarding your purchase, please feel free to contact us at any time using the eBay messaging system. Please allow 24 to 48 hours to receive a response. We will do our best to answer all your questions as soon as we can. Policy All purchases come with a 14-days money back guaranteed. SHIPPING IS NON REFUNDABLE. NO EXCEPTIONS. Buyers are responsible for all postage fees on return. All Returns must have RMA(Return Authorization Number) issued from Seller or package will be refused.
$
67.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Precision Toolmakers Vise. Vise Weight: 3.55 Lbs. Jaw Opening: 3-1/8". Jaw Width: 2". Jaw Depth: 1". High precision one-piece steel construction. Square ... moreand parallel to within. 0002".
$
279.99
Buy It Now
$29.99 Shipping
Condition: Used
Location: Westland, United States
4" OPENING--. ADD TO YOUR SAVED LIST.
$
13.77
Buy It Now
Free Shipping
Condition: New
Location: Monrovia, United States
Fits All Milling Machine Vises With A 3/8" -3/4" Vise Jaws. Hardened Steel Body Pins For Positive Clamping.
$
69.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
VISE MOUNT. Required 3" minimum vise opening. Vise NOT included. Max Bending Thickness: 14 Gauge Mild Steel or 1/8" Aluminum. Max Bending Size: 4". Removable ... moreHardened Finger Dies: 1", 1" and 2".
$
239.99
Buy It Now
Free Shipping
Condition: New
Location: Ontario, United States
Quickly to clamp and easy to operate. ZTQKG80CPK 3.2/80 1.6/40 3.1/80 3.9/100 7.9/200 12.1/5.5. Produced of high-quality steel, carburized to surface ... morehardness: HRC58~62. ZTQKG100-C 4/100 1.8/45 3.5/90 4.9/125 9.6/245 22/10.
$
65.66
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
4" Multi-purpose Rotating Bench Vise. Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique"V" jaws provide 4 ... morepoint holding power. Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open: 2" V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 W.T: 30 LBS Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
$
99.55
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Description Swivel Multipurpose Bench Vise A 5-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It can ... morebe used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material Built by ductile cast iron, the vise is more durable and hard when in use. Designed for long service time. Powerful Clamping Jaws.
$
10.50
Buy It Now
Free Shipping
Condition: New
Location: Rosemead, United States
Easily Mounted To The Top Of Most Vise Jaws. Made From High Quality Steel. To Fit Angle Down Type Vises. 1-5/8 x 1-3/8 x 1-1/4 Estimated . Unit Dim L ... morex W x H (in).
$
72.77
Buy It Now
Free Shipping
Condition: New
Location: Monrovia, United States
Not Including Vise.
$
45.99
Buy It Now
$14.99 Shipping
Condition: Used
Location: Westland, United States
2-1/2" OPENING--. ADD TO YOUR SAVED LIST.
$
121.69
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
6.7 in / 170 mm Milling Machine Worktable. The drill press table will be more convenient to adjust the tightness of the worktable with a number of bolts ... moreand nuts. Worktable length: 17.7 in / 450 mm. Worktable width: 6.7 in / 170 mm.
$
62.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
【WIDE APPLICATION】- Precision milling drilling vise, suitable for milling, drilling machine, and precision parts finishing. Swiveling vise features with ... morethe perfectly aligned precision jaw. Maximum clamping force of 15 KN.
$
59.99
Buy It Now
$15.00 Shipping
Condition: New
Location: Eagle, United States
It will also keep the stop rod square to the workpiece throughout the entire range of motion.
$
101.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
Jaws of every vise are hardened and ground with clamping force from 15-29 KN. Ensuring secure clamping. Vice body made of high quality cast iron(2 options ... moreare made ofductile iron ). 【 Sturdy Jaw 】 - Vice jaws are hardened and ground to HRC 40.
$
195.00
Buy It Now
$114.81 Shipping
Condition: Used
Location: West Barnstable, United States
Paramo No 3 4” Jaw Bench Vise Made In England Hi-duty Vice 45 Pounds. Good used condition showing some wear with a nice aged patina. Weighs 45 pounds
$
133.50
Buy It Now
Free Shipping
Condition: New
Location: Rosemead, United States
Better Values Friendly Service Fast Shipping BRAND NEW Precision Sine Vise Unit overall dimension: 7-1/2" x 3" x 4-1/4" Jaw width: 3" ... moreJaw Depth: 1-3/8" Jaw Opening: 4" Sine range: 0- 60 degree Base has slots for clamping on the mill table Unit approx. weight: 18lbs Quantity: 1 Shipping FREE SHIPPING in lower 48 States. Additional charge applies to APO. AK, HI, GU, PR, and VI addresses. Please contact seller for additional information. All items will be shipped Ground Service. Payments Paypal payment only please. Buyer can use MasterCard. Visa, Discover and American Express through Paypal. It is Safe, Fast& Reliable. In all cases payment is expected within 7 days of sale date. Contact Info We are here to help. If you have any questions or concerns regarding your purchase, please feel free to contact us at any time using the eBay messaging system. Please allow 24 to 48 hours to receive a response. We will do our best to answer all your questions as soon as we can. Policy All purchases come with a 14-days money back guaranteed. SHIPPING IS NON REFUNDABLE. NO EXCEPTIONS. Buyers are responsible for all postage fees on return. All Returns must have RMA(Return Authorization Number) issued from Seller or package will be refused.
$
45.00
Buy It Now
Free Shipping
Condition: New
Location: Farmington, United States
3" CLAMP-ON VISE WITH STATIONARY BASE. Jaw Width (In.). Prop 65Cancer and Reproductive Harm. Steel guide bars keep jaws aligned. Type of BaseStationary.
$
27.50
Buy It Now
Free Shipping
Condition: New
Location: Rosemead, United States
Fit 6" Vises. Fit On Kurt, Yuasa, And Many More Vises. Quantity: 1. 13 x 2-3/4 x 1-3/4 Estimated .
$
107.31
Buy It Now
$23.72 Shipping
Condition: New – Open box
Location: Venice, United States
Bench & Pipe Combination Vise. Jaw Opening Capacity 4 in. Jaw Width 4.0000. Pipe Jaw Included Yes. Throat Depth 2-3/4. Jaw Face Serrated. Swivel Angle ... more360. Material Cast Iron.
$
31.77
Buy It Now
Free Shipping
Condition: New
Location: Monrovia, United States
Especially used in the processing machinery industry, it can be used as a fixed type, it is an ideal accessory and household tool for various bench drills, ... moremilling machines, planers and other machine tools.
$
39.59
Buy It Now
$5.40 Shipping
Condition: New
Location: Ontario, United States
Heavy Duty 5" Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Steel Serrate steel jaws Oversized striking anvil Heat treated ... moreshaft 3 Down slots 360° Double locking swivel base Precision crafted and designed to provide dependable service and satisfaction Industrial quality Heavy duty cast steel construction Hardened and polished replaceable jaws and large anvil Swivel base allow you to get the angle on your workpiece*FREE SHIPPING COST TO THE LOWER 48 STATES ONLY COLOR MAY VARY PAYPAL VERIFIED AS OF 2002 We only accept PayPal. If paying with PayPal please wait for your payment information to update. DO NOT CLICK'PAYMENT SENT' if you are paying with PayPal. This makes it difficult to find your payment information and will delay shipping time. Most items are eligible for a shipping combination. These items must be paid for together. And recieve a 20% discount off total shipping costs. Please wait to receive your combined invoice, do not go through checkout until your combined invoice has been sent! Please note that it is the buyer's responsibility to maintain their shipping address updated. Items will be shipped to the address registered as the shipping address with Ebay/and-or/Paypal at the time of payment. Any updates to the shipping address must be made prior to payment. WE DO NOT ALLOW PICKUPS. NO PICKUPS. NO EXCEPTIONS. We do not ship to unregistered addresses. Your address must be registered with both Ebay and Paypal. We DO offer shipping to PO Boxes. However all shipments to PO Boxes must be made through USPS. If you require shipping to a PO Box you must pay using the USPS shipping option. It is the buyer's responsibiity to receive the package. Or pick it up from the carrier's location. If a package is returned to us because the Buyer failed to pick it up, or receive it then they will be issued a refund for the Purchase Price of the item, not including Shipping And Handling Costs and minus both a 15% restocking fee and return shipping costs. Most of our shipm
$
57.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
2 Way Cross Vise. Maximum Jaw Opening : 2-3/4". Jaw Depth & Length : 1" x 3". Heavy Duty Cast Steel Construction. Cross Travel Range: 4".
$
31.50
Buy It Now
Free Shipping
Condition: New
Location: Rosemead, United States
Excellent COndition works! Check out my other listings for more tools.
$
53.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Swivel Base For 6" Milling Vise. Made From Ductile Cast Iron. Precision Ground On The Bottom Of The Base. Unit Weight: 17.50 Lbs Estimate Only . Product ... moreDetail.
$
115.00
Buy It Now
$18.00 Shipping
Condition: Used
Location: Farwell, United States
The item for sale here is a Vice off a Norton Surface Grinder. It is in good used condition. Help yourself to a good deal. Farwell, MI 48622. from Antiques ... moreand Auto Parts, Collectibles, Household, and Tools.
$
57.00
Buy It Now
Free Shipping
Condition: New
Location: Jamaica, United States
Quality Self Centering Vice Vise For Drilling/ Milling Machine. Maximum Jaw Opening 55 mm, Jaw Depth 28 mm. Hardened Jaws with Horizontal / vertical Vee ... morefor Holding Round Jobs Intact. SELF Centering Vice Vise-50 mm 2".
1 2 3 4 5 6 7 8 9 10 11 12 13
 In 

Former Listings  
 
3 VINTAGE HEAVY DUTY VISE-GRIP WELDING CLAMPS -2 ( B C ) MADE USA OTHER KOREA
3 VINTAGE HEAVY DUTY VISE-GRIP WELDING CLAMPS-2( B C) MADE USA- 143 AND 145 THE OTHER BIG ONE MADE IN CHINA( CUMMINS TOOLS
VINTAGE BRINK AND COTTON C CLAMP VISE TOOL ADJUSTABLE LARGE SIZE
VINTAGE BRINK AND COTTON C CLAMP VISE TOOL ADJUSTABLE LARGE SIZE WE ARE NOT EXPERTS SO PLEASE REVIEW PICTURES AND ASK QUESTIONS IF YOU SEE SOMETHING YOU THINK WE MAY HAVE MISSED. WE DO NOT ALWAYS SEE OR NOTE EVERY IMPERFECTION BUT TRY TO TAKE A PICTURE FROM ALL ANGLES FOR YOU TO VIEW. PLEASE NOTE: WE DO NOT ATTEMPT TO CLEAN ANY OF OUR ITEMS AND LEAVE THAT TO THE BUYER IF THEY CHOOSE. WE HAVE HUNDREDS OF VINTAGE TAGS SO CHECK OUT OUR OTHER LISTINGS. WE DO COMBINE SHIPPING IF YOU WAIT FOR AN INVOICE. WE ARE SELLING ITEMS FROM ESTATES AND FOR MULTIPLE COLLECTORS WHO HAVE DECIDED TO DOWNSIZE. SOME OF THE ITEMS WE WILL BE POSTING INCLUDE VINTAGE MILITARY. GAS AND OIL, GLASSWARE, ANTIQUE CLOCKS, VINTAGE CAR PARTS AND MUCH MUCH MORE. WE ADD 50-100 NEW AUCTIONS ON A WEEKLY BASIS SO MAKE SURE TO ADD US TO YOUR FAVORITES. Check out my other items! ... moreBe sure to add me to your favorites list! Good luck with the Bidding! ONLY PAYPAL IS ACCEPTED AS PAYMENT. ANY ITEM MAY BE RETURNED WITHIN 14 DAYS FOR A COMPLETE REFUND OF THE PURCHASE PRICE BY PAYPAL PAYMENT. IF YOU HAVE ANY QUESTIONS ON THE ITEM LISTED. PLEASE ASK BEFORE BIDDING. WE WILL REPLY WITHIN 2 DAYS OF RECEIVING IT! THANK YOU FOR LOOKING AT OUR AUCTIONS AND GOOD LUCK! ONLY PAYPAL IS ACCEPTED AS PAYMENT. BUYER IS TO PAY FOR ITEM(S) WITHIN 7 DAYS OF THE AUCTION ENDING. PLEASE WAIT FOR A FINAL INVOICE AS ACTUAL SHIPPING MAY VARY DEPENDING ON LOCATION. WE TRY TO ESTIMATE THE AVERAGE SHIPPING COST. AFTER FINAL CLOSURE OF THE AUCTION WE WILL ADJUST THE SHIPPING COST UP OR DOWN AS NEEDED TO REFLECT ACTUAL CHARGES. WE ARE ADDING INSURANCE TO ANY AUCTIONS THAT ARE $50 U.S. FUNDS OR MORE. WE ALSO ASK THAT YOU PLEASE WAIT FOR YOUR FINAL INVOICE FROM US WITH THE INSURANCE ADDED& THE ADJUSTED S/H FEES FOR ADDITIONAL AUCTIONS WON. IF YOU PAY BEFORE THE ADJUSTMENT TO INSURANCE HAS BEEN SENT ON THE NEW INVOICE. YOU WILL HAVE TO PAY THE DIFFERENCE FROM THE 2 INVOICES BEFORE WE WILL SHIP YOUR ITEM TO YOU. ALL SHIPMENTS OVER $50 US FUNDS REQUIRE USPS INSURANCE. THE COST WIL
2 IRWIN / CRESCENT HEAVY DUTY VISE-GRIP WELDING CLAMPS - #11R
Picture is of the actual item s for sale SHIPPING IS FREE F OR LOWER 48 UNITED STATES ALL OTHERS CONTACT ME TO GET RATES PAYMENT DUE IN 3 DAYS
RIDGID NO 40 TRISTAND TRIPOD PIPE VISE BENDING PLUMBING METALWORKING
No 40 Ridgid Tristand Used. Please see pictures for condition. Thank you for looking. Please see our other items for sale.
Ridgid Model 21 Pipe Vise 1/8-2"
Nice Ridgid Pipe Vise Yoke style No. 21. Made in USA. Handles pipe from 1/8" up to 2 inches. Like new condition. May be shipped in two sections.
WE SELL CHEAP© Wit Vintage Watchmakers bench vise with waterproof cases holder
Hello& Welcome to Our auctions. We start the auctions here on eBay since 2011. 10.05 by using the tradema rk I want One like this! © and since 2013.01.05 also as We sell cheap © We are Member anig1946 and please remember tha t. We sell cheap © Before You bid. Please read My Returns policy and the Terms and conditions of the sales. Thank You& good Luck. Wit Swiss made Vintage Watchmakers bench vise with adjustable holder for waterprrof watch cases. Used. Sold as is.Without any warranty- International Buyers(outside EEC) please note: Import duties. Taxes and charges are not included in the item price or shipping costs.These charges are the buyer's responsibility. Please check with your country's customs offices to determine what these additional costs will be. Please note that I will not falsify customs declarations ... moreform s in order for You. Avoid taxes or customs charges, THIS IS ILLEGAL. Shipping& multiple purchases: I ship in bulk and combine as much as I can. All mailing are sent out in the same day or within one/ two days after cleared payments. I ship 5 working days a week. So take your time to combine your sales into one order. WWW.CTT.PT is the Portuguese official mail. All mail is sent only by registered mail with tracking number. Handling Charges& Shipping costs to Europe: 0 grams to 49 grams = £3.00- US$4.70 50 grams to 100 grams = £3.85- US$6.00 101 grams to 250 grams = £4.50- US$7.00 251 grams to 500 grams = £5.80- US$9.00 501 grams to 999 grams = £7.75- US$12.00 1000 grams to 2000 grams = £14.20- US$22.00 Handling Charges& Shipping costs to U.S.A/ Australia/ Worldwide: 0 grams to 49 grams = £3.25- US$5.75 50 grams to 100 grams = £4.50- US$7.00 101 grams to 250 grams = £5.20- US$8.00 251 grams to 500 grams = £7.75- US$12.00 501 grams to 999 grams = £14.20- US$22.00 1000 grams to 2000 grams =£24.50- US$38.00 Returns. Refunds& others: All items are sold in"as is" condition. No warranties ar
vintage WILTON 4" bench vise old mechanic tool swivel base anvil back pipe jaws
Here is an old bench vise from Wilton. The swivel base tool has 4" jaws that open about 4" There are pipe jaws and a small anvil on back. In good working order with what looks like a lot of original red paint. A good size for general shop work. Please look at the pictures and ask any questions before you bid. Thanks
Universal Vise & Tool Co. 12" Rotary Table Horiz/Vert.
Universal Vise& Tool Co. 12" Rotary Table Horiz/Vert. Nice Smooth Action This listing is for 1 Universal Vise& Tool Rotary Table USED. Shelf G31 12113785TT Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt for is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at it's ACTUAL purchase ... moreprice. It is against federal laws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
Haas HRT310 CNC Rotary Indexer with Workholding Vise
Haas HRT310 CNC Servo Rotary Table with bed and workholding vise. We added the bed and workholding vise after acquiring the HRT310. We are also willing to sell just the Haas Rotary Table without the workholding vise and bed for $12.000 if interested in just the indexing unit without the add ons. Local pick up is welcome! Buyer responsible for freight charges if shipped. More Item specifics: Duty Cycle full/low: 50/100% RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13e158be91f-0xfc-
UNUSUAL GERMAN MADE HAND VISE PEER
FROM RETIRED CLOCK COLLECTOR WORKSHOP GREAT TOOL MADE IN GERMANY MARKED PEER GRAT ADJUSTABLE VISE OR WRENCH
Vintage Engravers Vise
Nice old unknown mfg engravers vise 5" H\ 4 1/4" across base\ 2" dia closed vise. Strangely no makers marks or numbers. Nickel plated finish flaking in places. Light surface rust on bare metal. I did kill the rust with 0000 steel wool and oil. No vise key\wrench with it, appears to be about.170 square female wrench needed. Each side is independently adjustable, non adjustable angle( base fixed vertical vise) Weight 9 lbs Listed with no reserve fixed shipping $15.00. We just purchased a large amount of collectable\custom knives from a estate. Don't miss the others being listed. Over the next several weeks. Yes there are that many! Payments expected within 3 days of auction closing. Thank You! Combined shipping on knife purchases. Wait for invoice to pay.
PARALLELS GRIND VISE 2"LONG (16 TOOLMAKER MACHINIST RECENTLY PRECISION GROUND!!
PARALLEL SET FOR YOUR GRIND VISE OR AS NEEDED. FANTASTIC! ONLY MY OWN SET IS NICER THAN THIS SET! GRIND VISE PARALLEL SET. ALL ARE PRECISION GROUND IN PAIRS TO ENSURE PARALLELISIM AND SQUARE FACES TO SIDES! ABSOLUTELY ONE OF THE NICEST GRIND VISE PARALLEL SET I HAVE SEEN! THIS IS A FULL OR COMPLETE SET. EACH HAS A NAME ENGRAVED ON THE END AS SHOWN. PLEASE READ SIZES BELOW. 16 PIECES TOTAL! ALL PARALLELS MORE THAN LIKELY MADE FROM A-2 AS MOST OF HIS TOOLS ARE STAMPED A-2. 16 ARE 1/8" OR ABOUT.122"123" X 2" LONG. 16 TOTAL PARALLELS HERE WITH HEIGHTS OF: 2) 1/8" X 5/16" 299" TALL. ENGRAVED ON END AS SHOWN. 2) 1/8" X 7/16" 423" TALL. ENGRAVED ON END AS SHOWN. 2) 1/8" X 9/16" 553" TALL. ENGRAVED ON END AS SHOWN. 2) 1/8" X 5/8" 625" TALL.STAMPED WITH 5/8 AND ENGRAVED ... moreON END AS SHOWN(2) 1/8" X 3/4" +(774" TALL. STAMPED WITH 3/4 AND ENGRAVED ON END AS SHOWN. 2) 1/8" X 7/8" +(891" TALL.STAMPED WITH 7/8 AND ENGRAVED ON END AS SHOWN. GRIND NICK ON CORNER OF ONE AS SHOWN. 2) 1/8" X 1" +(1.030" TALL.STAMPED WITH 1 AND ENGRAVED ON END AS SHOWN. 2) 1/8" X 1-1/8" +(1.147" TALL. STAMPED WITH 1-1/8 AND ENGRAVED ON END AS SHOWN. ALL 2" LONG SEE PICS. RECENTLY PRECISION GROUND ON THICKNESS HEIGHT AS SHOWN! HIGH PRECISION ACCURACY USED FOR GRINDING.INSPECTION AND LIGHT MACHINING AS NEEDED. SOME PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price shipping for first(and/or highest listed or calculated shipping of
Machinist Vise Base 6 1/2 x 5 1/2 jaws 3 1/8 x 1 .
Here is a nice machinist vise that has a 6 1/2 x 5 1/2 inch base. The jaws are 3 1/8 x 1 inch.There is a v channel in the jaw to hold an item. The vise opens to 2 3/4 inches.There are no Manufactures markings. thanks I can also Bill ship medium flate rate if cheaper. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
Columbian Bench Stationary Vise 5" Jaw no. 505
Huge and Heavy Columbian Vise. 5" wide jaw.number 505. Actually nice shape. Operates smoothly. Posted with
WILTON VISE 4" JAWS USED "NO RESERVE" MACHINIST VISE
Nice wilton 4' jaws. Barell vise made in usa by wilton.This vise has very little use,Barely any wear in the jaws, also the rubber pads in the handle. are still in excellent condition. Works 100% wilton sticker still present, please e-mail any? thanks for looking.
2-1/2 GROOVED JAW DRILL PRESS VISE
This is a grooved jaw drill press vise. The jaws are 2-1/2 wide.
WILTON VISE 400S 4" JAWS IN EXCELLENT CONDITION
WILTON VISE 400S 4" JAWS IN EXCELLENT CONDITION Fellas. I've had this Wilton sitting in my garage for about 7 years. I saved the best for last. This Wilton made in the 90's is in excellent condition. Its just the way you see it after 7 years of sitting. Its dirty and the proud owner can either put it right to work or clean it up. The vitals have been lubed so really, its good to go. With care, it will outlive me for sure and probably you too. Please, any questions, feel free to ask. Thanks for looking.
Wilton Bench Vise w/pipe jaws & swivel locking base & Craftsman Tools C- clamps
Hello. This listing is for a nice little Wilton Vise and a brand new package of Craftsman C-Clamps. Works great. Ideal for hobby,jewelry,soldering,etc. Made in USA-vise is lightly used. Minor marks and wear-swivel locking base-pipe jaws-straight handles-jaw length 3-1/2" anvil top(about 1-1/2"x1-3/4" overall height about 5-3/4" Length about 8" Craftsman clamps are brand new sealed in package- 1" opening. Made in China.
Starrett Co Jeweler Machinist Hand Held Vise NO 86 MADE IN ATHOL MASS, USA
Up for sale is a Starrett hand vise marked THE L.S. STARRETT CO. ATHOL. MASS. USA PAT. NOV 13-1923 NO.86. Overall this tool is in excellent plus condition. Very clean as you can see by the pictures. The wood handle is solid with normal signs of use but no abuse. You will be hard pressed to find a better example of this tool. Please use shipping calculator for shipping cost to your location. Check out my other auctions as I will gladly combine shipping to save you money. All items in stock and ship from Texas. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-13e15eaabf8-0xef-
Yost 33C Combination Pipe & Bench Vise
This sale is for one used Yost 33C vise without swivel base. This is a"Made in America" heavy duty vise. Weighing in at 89 lbs. This vise is used but in excellent condition. Paint has been stripped off and surface rust was removed, sprayed with WD-40. The 5 inch wide jaws are like new and this vise has a new clamp screw and matching nut that cost $150. The new list price for this model is $988.00 just Google"Yost vise" and see for yourself. Shipping to the lower 48 only. Please contact me before paying if you would like local pick-up. Double click on above image to view full picture. 65.000 PSI Tensile Ductile Iron Body Parts Replaceable Hardened Steel Flat Serrated Jaws Replaceable Hardened Steel Pipe Jaws Pipe Jaws Set Back to Allow for Machinist's Vise Use Pipe Jaws Designed to Grip Pipe Securely Design Helps Prevent ... morePipe Marring. Crushing or Bending Furnished with Machined Flat Base for Easy Mounting Conforms to Fed. Spec. GGG-V-410B Type IV No Pinch Main Screw Handle Continuous Rolled Thread on Main Screw, Model# 133C, Item# 10133, Jaw Width(nominal inches) 5" Jaw Opening(nominal inches) 7.5" Throat Depth(nominal inches) 6" Min Pipe Capacity(nominal inches) 125" Max Pipe Capacity(nominal inches) 4.5" Base Stationary, Material Ductile Iron,
Wilton Bullet Vise, 3 1/3" jaw. No.4 stamped on side. Really Nice and Heavy vice
Wilton bullet Vice. Chicago USA. 3 1/2" Jaw, Marked No-4, and has numbers 835 on vice. Has swivel mounting base. Vice opens real nice, no wobble, closes easy, jaws are nice, nothing broken, damaged, or repaired. 14" Over all length. Nice heavy duty vice, just sandblasted and painted, and looks nice.
Machinist Tools Mini Homemade Lathe Vise Grip
machinist Tools Mini Homemade Lathe Vise Grip Measures 5 1/2" long& 1" wide Condition: Used. Needs cleaning& shows rust Please view all pictures for the complete condition and description of this item. Your purchase will ship within 1 business day of received payment. Payment is due within 7 days of end of auction. Feel free to contact me if you have any questions at all and Thank You for viewing My Auction! Free shipping and Delivery Confirmation in USA! International Bidders Welcome! Unfortunately. Due to delays in customs.I will no longer be shipping to Italy or Brazil. International bidders are responsible for all taxes. Tariffs& duties
SMALL DRILL PRESS OR MILLING GRINDING VISE LOT OF 2 PALMGREN AND OTHER ANGLE
2 small drill press/mill vises. The Palmgren opens 1.5" and is 1.5" wide. The tilting angle vise opens 2.25" and is 2.5" wide with 1.5" deep jaws. Good used condition. But do have very minor surface rust. FREE SHIPPING/PRIORITY MAIL.
KURT 6" CNC VISE / KURT VERSATILELOCK CNC VISE Model 3600V
KURT VersatileLock CNC 6" Vise Model 3600V Condition: Good Questions? call Metro Machine& Tool 732-650-0666
Watch Tools Set of 4 Vintage Pin Vises Vise
Description Set of 4 Vintage Pin Vises. This came from a watchmakers bench. Being sold as is. Payment Please bid only if you intend to pay. I will ship to your valid paypal address. Payment expected within 4 days of end of auction. Shipping I combine shipping whenever possible to save the buyer money. Sometimes the size or weight of an item prevents this so if you have questions please ask otherwise I will be glad to put more than one purchase in the same box and ship them for one price plus insurance for the all items. International customers: I will ship most items small flat rate priority mail; however if the item value exceeds $100. I will send the item express mail this is the only method that offers tracking. I will not alter the value of an item on a customs form and the buyer is responsible for any taxes or customs fees in their country. ... moreIf your item does not arrive please check to see of it is being held for pickup or held in your customs office this has been a problem in the past. I insure all packages. If a claim needs to be filed please be aware you will have to sign forms that will be sent from the insurance company. Please note: All claims must be filed within 90 days of the ship date. Also. If the claim is for lost shipments you must wait before filing: 21 days for domestic shipments, 60 days for shipments to Italy, 45 days for shipments to all other international locations(including shipments from the U.S. to Canada, from Canada to the U.S. and from U.S. to APO/FPO addresses. Terms of Sale If the item is received substantially different from described. The item may be returned within 14 Days. Buyer must contact us within 3 Days after receipt indicating their concern before it is shipped back to us. The item must be returned in the same condition it was sent. Buyer and seller will agree upon the shipping method that is to be used. Only the selling price of the item will be refunded. We do not refund shipping charges. About Us I try very hard to provide accurate description and the best picture
VISE GRINDING FRESH GROUND MACHINIST TOOLMAKER HARD 5" DOVETAIL HIDDEN SCREW TYP
TOOLMAKER 5" GRINDING VISE MADE IN USA! FRESH GROUND AS SHOWN USING NEW HERMANN SCHMIDT SQUARING BLOCK FOR ACCURACY! WOW! IS IT NICE! 5" USED GRINDING VISE IN EXCELLENT CONDITION AS SHOWN IN PICS. VISE COMES AS SHOWN. SEE PICS AND ASK ANY QUESTIONS THANKS. ACTUAL VISE DIMENSIONS ARE 2-1/2" 2.464" WIDE X 1-1/4" 1.199" TALL AND IS 5-1/16" 5.054" LONG JAW DEPTH IS 11/16"+ OR.71" VISE HAS(3) TAPPED 1/4 X 20 HOLES AS SHOWN. VISE HAS BBEN IN STORAGE IN OUR GERSTNER BASE SINCE GROUND! THIS VISE IS IN VERY NICE CONDITION AS SHOWN IN PICS. VISE DOES HAVE A SMALL EDM BURB IB BASE NEAR FRONT JAW AS SHOWN. VERY SMALL BUT IS THERE. LOOK CLOSELY AT ALL PICTURES TO SEE A NICE VISE! PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! THIS IS NICE AND I'LL SHOW YOU IF YOU LOOK! THANKS FOR LOOKING! ... moreI WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us in the exact same condition as you received them(all accessories and boxes included as sent to you) Returns/exchanges must be received within 14 days of your winning bid. We are glad to refund any purchase but we are sorry there is a 15% restocking fee. Include your name. Address, item# daytime telephone# how you p
STARRETT NO. 166D PIN VISE WITH CUSTOM INSULATED HANDLE
Starrett Pin Vise No. 166 D In great condition. My Dad who was a machinist I believe added this Custom insulated handle to make it easier to fit in your hand.
0LD~ Ridgid yoke style 1/8"~2" clamp~pipe vise B-Y-2-A
Vintage Ridgid B-Y-2-A yoke style pipe vise Portable clamp-on style; 1/8" thru 2" pipe Very good used condition
Pipe Vise Clamp Holding Tools ??????
i have no idea what these are for they were i a toolbox i purchased from a yard sale they are very heavy they look to be some kinda pipe holding vise sold as is there are three of them they are big and heavy
Vtg Craftsman VISE:Heavy Duty Machinist Swivel Anvil:506-51801:RED
Craftmans Vise shows wear as shown opens and closes smoothly has not been cleaned or restored
USA Made Scout 4" bench vise / anvil / pipe jaws Swivel Base
Vintage Scout 4" bench vise. Great condition w/ no cracks or welds. Original paint looks great. Features swivel base& pipe jaws. Measures approx 10" long(closed) 6" tall. Jaws are 4" wide. Opens up to 4" Weighs 12lbs. Please see pics& feel free to ask any questions. Posted with o.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpl%7E3go7%3Eo-13e16451222-0xf9-
VINTAGE WILTON 645 ANVIL BENCH VISE NO SWIVEL BASE 5" JAW MACHINIST SHOP TOOL
OLDER WILTON 645 VISE GOOD USED CONDITION. SOME SURFACE RUST WHERE PAINT IS MISSING. SOME HAMMER MARKS ON TOP WORKS GOOD. THREADS LOOK VERY GOOD, HANDLE IS NOT BENT JAWS OPEN UP TO 6" AND ARE 5" WIDE HEAVY VISE WEIGHS 29-1/2 lbs 8" TALL X 13" LONG USA MADE ALSO REMEMBER INCLUDED IN SHIPPING COST IS DELIVERY CONFIRMATION. THANKS FOR LOOKING AND BE SURE TO CHECK OUT MY OTHER AUCTIONS! Please contact me within 3 days of auction end unless payment has been made. E-Bay is no longer allowing the use of paper payments. This is because they believe it is to complicated for buyers to have to choose between multiple payment methods. Because of this change. We cannot advertise as accepting any paper payment method. We will ALWAYS ship out any item that is paid for. Regardless of how. We DO NOT accept Personal Checks. Buyers must ... morepay within 7 days of purchase or the item will be put back up for auction. If you have your item shipped within the state of Missouri or arrange for a local pickup there is a 7.7% sales tax that will be applied to your invoice. Paypal is Preferred. INTERNATIONAL BUYERS ARE RESPONSIBLE FOR ANY IMPORT/CUSTOMS FEES OR TAXES SERIOUS BIDDERS ONLY. Disputes will be filed with eBay within 7 days of an auction's end if the buyer has not responded to payment requests. FEEDBACK: AS A SELLER. THE WAY WE KNOW YOU HAVE RECEIVED YOUR ITEM AND ARE HAPPY IS WHEN YOU LEAVE US FEEDBACK. WE WILL BE LEAVING YOU A POSITIVE FEEDBACK UPON RECEIPT OF PAYMENT. SINCE WE WANT ALL OUR BUYERS TO HAVE A POSITIVE TRANSACTION WITH US, WE WILL AWAIT YOUR FEEDBACK. IF YOU HAVE ANY PROBLEM WITH YOUR ORDER, PLEASE CONTACT US AND GIVE US A LITTLE TIME TO WORK THROUGH YOUR ISSUE BEFORE LEAVING BAD FEEDBACK. IF THE FIRST TIME WE HEAR ABOUT YOUR PROBLEM IS THROUGH BAD FEEDBACK, WE HAVE NO OPPORTUNITY TO PROVIDE YOU A POSITIVE BUYING EXPERIENCE. REMEMBER THAT NEUTRAL IS ALSO VIEWED AS BAD FOR A SELLER! WE WANT YOU TO HAVE A POSITIVE BUYING EXPERIENCE! WE DO NOT CONTINUE TO DO BUSINESS WITH CUSTOMERS THAT CHOOSE TO L
Vintage Cast Iron Hardy Table Top Vise Anvil No. 3
Vintage Cast Iron Table Top Hardy Vise Anvil No. 3 Marked: Hardy Vise No. 3; Temple. Pa, Made in U.S.A. In Good Pre-Owned Condition. Showing some Scratches, Cut Marks/Wear in the Finish from Use-See Photos* Check out my other items! ~~Shipping& Handling are Additional as Indicated ~~Insurance is included for an Additional Fee at Buyer's Request Only. In the Event of Damage, it is the Buyer's Responsiblity to File the Claim since you will have the Item ~~All items are described to the best of our knowledge. Please ask any questions prior to placing a bid& we will do our best to answer accordingly ~~All items are sold“AS IS” Refunds only if error in listing! ~~Additional pictures available upon request with email address We accept PAYPAL; all items must be paid within 7 days of auction close unless other arrangements are made ... more~~Thanks!
MACHINIST TOOLMAKER GRINDING VISE HARDENED, 2 7/8 W x 2 3/4 H x 7 1/2 L
FREE SHIPPING MACHINIST TOOLMAKER GRINDING VISE HARDEND MADE BY A USA TOOLMAKER 2 7/8 W x 2 3/4 H x 7 1/2 L WRENCHES, EXTRA SCREW.KNOCK OUT PIN IN GREAT SHAPE.SOME SCRATCHES AND TOOL MARKS DRILL MARK ON BASE AND JAW SEE PICTURES
Babco 605 Anvil Vise with Rotating Base
Babco 605 Anvil Vise with Rotating Base in Excellent Condition
Moore Jig Borer Bay State Tool Precision Machinist Vise 4" Jaws Low Profile
This auction is for a precision vise with a low profile. Made by Bay State Tool. This vise can be used for grinding, milling, or plenty of other tasks. Based off other auctions for very similar vises though, I believe that this may have been manufactured to go with a Moore Jig Borer, however, I don't guarantee this, nor do I know which model it would be paired with Measurements are as follows: Base: 8"x10.5" Jaws: 4" Wide Height: 3" These are all approximate) While there was definitely some rust cleaned recently you can see in the pictures that the vise still opens and closes fully. The action is slightly loose though. And each side of the moving jaw doesn't always close at the same rate, making the jaw slightly askew/diagonal. Since I spent about 2 hours cleaning rust though, I don't have to time to try and ... morefix this, or even know if one can fix this issue. However, the jaw can be made straight again/parallel with the stationary jaw but simple pushing it straight. I can't imagine this will be an issue except for very high precision work. While this vise was well built because of this problem it's being sold AS IS; no returns will be granted. NOTE: THE VISE YOU WILL RECEIVE IS NOT THE VISE IN THE PICTURE. I HAVE TWO ALMOST IDENTICAL VISES AND THE FIRST HAS SOLD. THIS AUCTION IS FOR THE SECOND. THE DESCRIPTION IS ACCURATE FOR THE SECOND VISE(THIS AUCTION) Really the only difference between the two is the issue described above, black paint on the base(instead of the pictured yellow) and slightly heavier rust. This has largely been cleaned. The only reason I haven't updated the pictured is that a friend is borrowing my photography equipment, but I can't wait to list my items. If you're concerned about this, send me a message and I'll send you a lower resolution picture(s) If you have any questions. Please don't hesitate to ask! On Apr-16-13 at 14:36:40 PDT. Seller added the following information: Update: A photo of the actual vise you will receive has been p
THE ADJUSTA VISE G&W MACHINING 6" MILLING MACHINE KURT STYLE ADJUSTABLE JAWS
THE ADJUSTA VISE G&W MACHINING 6" MILLING MACHINE KURT STYLE ADJUSTABLE JAWS Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Not sure about the maker of the unit but looks like the kurt vise. The jaws are marked The Adjusta Jaw G&W machining company Corona Ca. The top of jaws max height is 2 1/2" and about 1" travel. The vise is 6" wide and opens to about 4 3/4" Without the adjustable jaws it is about 7 1/4" 360 degree swivel in 5 degree marks. It is in excellent condition with very light use. No hammer marks. The jaws look great and work fine. No other tags but I do ... morebelieve it is USA made. No crank or handle. Shipping weight is about 115 lbs. It will get boxed and shipped safely and promptly. Due to the spam blockers by various ISPs some of our emails get returned. If no emails are received from us or from Ebay at the end of auction. Please check your email settings and verify that you can receive emails and make sure that Your Ebay contact info. is current. Also our Ebay Contact info is current and can be optained by auction winner through the Ebay web site. SHIPPING We try to ship in a day or two upon receipt of payment. Please email if item is not received within ten days after receipt of payment. 1)All items will be shipped with UPS ground unless otherwise indicated in item description. Our zip code is 90501. for. AFTER THE AUCTION An automated end of auction email will be sent that includes all relevant auction informations. Our information and a link to a form to be filled up by the winning bidder including method of payment chosen. Response to this email is requested to facilitate processing of sale. 9.75% California sales tax applies to all California residents and must be included with payment Payments Payment I accept the following
4" Manual Machine Vise w/ Swivel Base- 4" Width/Opening, 1-1/2" Depth (CH3)
Manual Machine Vise Free Shipping UPS Ground-37 Lbs- Jaw Height(Inch) 1-1/2 Jaw Opening(Inch) 4 Width(Inch) 4 Jaw Depth(Inch) 1-1/2 Jaw Width(Inch) 4 Swivel Bolt Centers 8-1/8
VISE GRINDING 3" MEADVILLE Pa. TOOLMAKER MACHINIST GRIND INSPECTION EDM MILL QA!
VISE. GRIND VISE. USA AMERICAN TOOLMAKER MADE. VISE MEASURES 3-1/4"+( 3.242" LONG X 1-1/2" 1.500" WIDE X 1-1/2" 1.480" TALL. OPENS TO ALMOST 1-1/16" AS SHOWN. 3/4"+(752" JAW DEPTH. VISE HAS(2) TAPPED#10 X 32 HOLES ONE ON EACH SIDE OF FIXED JAW FOR STOPS. VISE HAS NO STAINING AS SHOWN AND NO MILL DRILL OR GRIND DAMAGE. NO ENGRAVING OR OWNERS MARKS. Solid. One-piece body. Made from A-2 TOOL steel. Hardened& stabilized. I HAVE MANY FRESHLY GROUND TOOLS LISTED IN THE STORE PLEASE CHECK OUT MY OTHER AUCTIONS! I will combine shipping on multiple purchases(within 3 days of each other)full price for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING APPLIES TO ONE ITEM. $3.00 ... moreEACH ADDL ITEM. Returns must be received back by us in the exact same condition as you received them(all accessories and boxes included as sent to you) Returns/exchanges must be received within 14 days of your winning bid. We are glad to refund any purchase but we are sorry there is a 15% restocking fee. Include your name. Address, item# daytime telephone# how you paid, and if you are requesting a refund or exchange. SEE OUR STORE! CHECK OUR STORE FOR MANY MORE NICE HARD TO FIND TOOLMAKER ITEMS.INCLUDING VISES AND PARALLEL SETS, MATCHED PAIRS OF ANGLE PLATES,VISES, VBLOCKS AND MANY OTHER HARD TO LOCATE ITEMS. FEEDBACK: I leave feedback on all of my transactions once the transaction is complete. What this means is that when you have received your item and have left feedback stating that you are satisfied. I will then leave appropriate feedback finalizing the transaction. I DO NOT leave feedback when payment arrives as that is only half of the transaction and it wouldn't be fair to either party to leave feedback before both of us are satisfied. CHECK OUR FEEDBACK AND YOU WILL SEE MANY HAPPY CUSTOMERS! SEE PICS. WHY BUY IMPORT WHEN A M E R I C A N TOOLING MADE IN MEADVILLE PA T
VINTAGE KNU-VISE P400 MACHINIST LOCKING CLAMP HAND VISE (2)
2 EACH VINTAGE KNU-VISE P400 MACHINIST LOCKING CLAMP HAND VISE
(4pcs) 1" Step Clamps for 5/8 Bolt Vise Work Holding
Up for auction are 4 step clamps for quick clamping. The have a 1" step in them. You can raise onto a 1" block and hold down a 2" piece(or any variation) There is only 1 shown in the picture. But you will revieve 4 pieces. I will ship the day after payment is made. Feel free to ask any questions.
Antique Wilton Bullet Vise Blacksmith Metalworking Machinist Tool Anvil
Great condition Wilton vise. No damage. Cracks, repairs, etc. Posted with
VINTAGE SMALL PALMGREN TOOL MAKERS VISE, 1 1/2" JAWS, 1 5/8" OPENING, USABLE CON
VINTAGE PALMGREN 1 1/2" TOOL MAKERS VISE OPENS TO 1 5/8" PALMGREN TOOL MAKERS VISE IS USED IN GOOD USABLE CONDITION. DOES HAVE SOME LIGHT SURFACE RUST WHICH WILL CLEAN UP NICELY. SEE PICTURES THANKS FOR LOOKING. WE WISH YOU A GREAT DAY, GOD BLESS AND HAPPY BIDDING! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13e167f4db5-0xf2-
MILLING VISE NO 1 ADJUSTABLE ANGLE 4 INCH ATLAS SOUTH BEND LATHE TOOL
WORKS GREAT OPENS 2 INCHES HAS 4 INCH JAWS.WILLIAMS NO 2 CRANK HANDLE PERIOD CORRECT FOR THE ATLAS SOUTH BEND CRAFTSMAN LATHES.NEEDS A GOOD CLEANING OTHERWISE ITS IN FINE SHAPE GREAT ADDITION TO THE WORK SHOP.
HERMANN SCHMIDT SINE SET VISE PLATE TOOLING ORIGINAL BOX
COMPLETE SET IN GOOD USED CONDITION SOME SIGNS OF USE.A COUPLE OF DINGS ON THE VISE CLEARLY SHOWN IN THE PICTURES, STILL A GREAT TOOL. SET HAS PLENTY OF EXTRA STUFF INCLUDING A FEW HAND TOOLS AND A BUNCH OF EXTRA BOLTS.CHECK OUT THE PICTURES. Thanks for bidding! Please email me if you have questions. We accept: PAYPAL AND ALL FORMS OF PAYMENT PERMITTED BY EBAY. SHIPPING: BUY MORE. and Save on Combined Shipping! We ship via UPS Ground. US Postal Service, Worldwide Check out my!Be sure to add me to your
HERMANN SCHMIDT STYLE SHOP MADE VISE 3 INCH JAWS 4 INCH CAPACITY
SHOP MADE VISE WORKS GREAT VERY GOOD CONDITION. Thanks for bidding! Please email me if you have questions. We accept: PAYPAL AND ALL FORMS OF PAYMENT PERMITTED BY EBAY. SHIPPING: BUY MORE. and Save on Combined Shipping! We ship via UPS Ground. US Postal Service, Worldwide Check out my!Be sure to add me to your
PALMGREN 2 1/2" JAWS TILTING MACHINISTS VISE DRILL PRESS VICE 3 " CAPACITY
FROM A CLOSED MACHINE SHOP.VERY GOOD CONDITION 2 1/2 INCH JAWS OPENS ABOUT 3 INCHES GOOD VISE Thanks for bidding! Please email me if you have questions. We accept: PAYPAL AND ALL FORMS OF PAYMENT PERMITTED BY EBAY. SHIPPING: BUY MORE. and Save on Combined Shipping! We ship via UPS Ground. US Postal Service, Worldwide Check out my!Be sure to add me to your
Wilton 6" Jaw Machinist Blacksmith Swivel Base Tradesman Bench Vise 6 " Opening
Wilton 6" Jaw Machinist Blacksmith Swivel Base Tradesman Bench Vise 6" Opening Specification good condition missing pipe jaws 4" throat depth weighs 66 lbs Bullseye Catalog# 22748 CONTACT INFO: Contact us Monday- Friday 8am-4pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel ... morefree to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow t
BROWN & SHARPE 4 PIECE PIN VISE SET 0" TO .200" NO 599-790
FROM A CLOSED MACHINE SHOP.GOOD CONDITION.NO ENGRAVINGS METRIC 0 TO 5.0 MM Thanks for bidding! Please email me if you have questions. We accept: PAYPAL AND ALL FORMS OF PAYMENT PERMITTED BY EBAY. SHIPPING: BUY MORE. and Save on Combined Shipping! We ship via UPS Ground. US Postal Service, Worldwide Check out my!Be sure to add me to your
Wilton 101028 4 inch Swivel Base Bullet Bench Vise
SquareTrade © AP6.0 Wilton 101028 4 inch Swivel Base Bullet Bench Vise. SPECIFICATION: Bullseye cat. j14735 w Vise has one corner of the back jaw support broken off and missing see pictures. Does not affect operation usability. PLEASE READ: Indiana buyers: 7% sales tax will be added to the items being shipped to an Indiana location. We have a 30 day money back refund period for an item that does not work. Simply contact us Monday- Friday 8am- 5pm@ 574-825-4990. This is suplus. The box item may show sings of dust, wear, writing, scratches, grease from storage, tape slight surface rust(SSR) All items are for sale in our retail store. We reserve the right to end this listing at any time. CONTACT INFO: Contact us Monday-Friday 8am-5pm@ 574-825-4990 with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway ... more20 Middlebury. IN 46540 SHIPPING: We ship USPS& UPS ground. We choose which carrier. We will NOT ship with buyers USPS UPS account. If this item is shipped by a LTL freight carrier buyer will need to contact us@ 574-825-4990 for a freight quote. Seller's item will be shipped within 1-3 business days. Powered by
MC Machinist Tool Vintage Drill Press Cross Slide Vise #75 + Prismatic Jaw
Comes with extra accessory-Prismatic Jaw plus instruction operation manual paper. Base is 4" x 8 1/2" 4 3/4" high, 1 1/4" throat depth. The vise is 3 1/4" wide. Shows very light wear. No corrosion. No rust. Shipped UPS with tracking& insurance. Use shipping calculator with your zip code for shipping costs. Thanks! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb%3A%60%3E-13e167f4da0-0x101-
COLUMBIA USA MADE 4 INCH BENCH VISE WITH PIPE CLAMP AND SWIVEL BASE FINE USED
COLUMBIA USA MADE 4 INCH BENCH VISE WITH PIPE CLAMP AND SWIVEL BASE FINE USED Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge ORIGINAL USA MADE AND QUALITY COLUMBIA 4 INCH SWIVEL BASE BENCH VISE WITH PIPE CLAMP. EXCELLENT JAWS AND ARE IN SOLID SHAPE. PLEASE FEEL FREE TO PAINT ANY COLOR YOU LIKE. AS YOU CAN SEE THERE ARE COLOR OPTIONS GALORE ON THESE. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
VINTAGE WILTON 835 BULLET MACHINIST VISE 3 1/2 " JAW
YOU ARE BIDDING ON A VINTAGE WILTON 835 BULLET MACHINIST VISE 3 1/2" JAW. NICE ORIGINAL CONDITION. WITH 2 ORIGINAL PARTIAL LABLES. VERY GOOD WORKING CONDITION. NO CRACKS OR BREAKS. 9350. SHOWS AGE& USE WEAR. If you have any questions feel free to ask. I ship via USPS to the Continental USA for a flat rate of $22.00 Payment Must be made within 7 days from the end of auction. If no payment and no contact has been made a non paying bidder dispute will be filed. Thanks for looking and good luck.
Vintage Wilton Bullet 4 1/2" C1 Vise
Vintage Wilton Bullet 4 1/2" C1 Vise This vintage Wilton vise has obvious. Expected wear but still in good condition. On the sides it states"Wilton C1 Chicago. U.S.A. Very heavy duty. Weighs about 60 lbs. The vise opens and closes very smoothly. The vise opens to about 8" and the jaws are about 4 1/2" wide. There is some damage from previous bolts being removed. Please see pictures.
Precision Grinding Vise Tool & Die Maker
Precision Grinding Vise Used in moldmaking 2 3/8" x 4 5/16" x 1 3/4" approx) Handle not included in measurements Comes from a smoke-free environment Seller accepts Paypal and combines shipping. Seller ships to the 50 United States and Canada. Please make payment within 3 days of auction end. Thank you!
Emco Vise For Milling Machine Cnc Mill Lathe Turning Router
This auction is for one emco electric vise for an emco milling machine. These were used on several emco machines that were assembled into automated cells. There is some surface rust on the vise jaws. A voltage is applied to a gear reduced electric motor. Which clamps the part. Very simple. This vise sold for a couple thousand new. The really nice thing is that it bolts right to an emco machine table and gives a very large workpiece gripping capacity. Save some big money here on this very rare item. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13e169673f1-0xf7-
Vintage Starrett Machinist Utility Vise 3-1/2" Jaw W/ Swivel Base Athol,Mass USA
VINTAGE STARRETT UTILITY BENCH VISE WITH SWIVEL BASE.PIPE GRIPS AND ANVIL SURFACE. VISE IS IN GREAT CONDITION.NO CRACKS OR REPAIRS. ATHOL.MASS.USA MODEL 013-1/2 JAWS MEET PERFECTLY SQUARE 3-1/2' JAW WIDTH JAWS OPEN UP TO 3-1/2' 11' OAL WHEN CLOSED 6' HIGH 3-1/2' JAW DEPTH VISE WEIGHTS 16 LBS Posted with the 1t.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13e16967423-0xf1-
HEINRICH 6" DRILL PRESS VISE "Model 6-SV" GRIP MASTER
HEINRICH Grip Master 6" Drill Press Vise"Model 6-SV" Condition: Good Questions? call Metro Machine& Tool 732-650-0666
Vise, Stanley Machinist Vise, 4" Wide Jaws, x 2-1/8" High Vise opens to 4-3/16"
For your consideration is this Stanley Machinist Vise. 4" Wide Jaws. 2-1/8" High Jaws. The Vise opens to 4-3/16" The over all length of the Vise Body is 9-3/16" When all the way open its 14-9/16" to the end of Handle) This Tool weights 15 lbs. 4 oz. Vise has surface rust and a drill tip has marked the top of the positive Jaw(see pictures) Please see the picture and email with any questions. Please take a look at my other Ebay Stores. I have a lot of nice items listed there. MB5-3838 International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. By purchasing this item the buyer accepts ... moreall responsibility for any accident. Injury or, property damage to himself or other people resulting from the use, abuse or misuse of this item.
Vintage Dunlap Machinist's vise Lathe Tool Bench Mill Drill Press 2" jaw NICE
Up for auction is this nice vintage Dunlap Machinists vise. It has about a 2 1/4" jaw and is about 9" long when jaws are closed. It has notches so it can be bolted down to shop bench. Check out my other auctions for more items. Will combine shipping whenever possible. Buyer to pay S&H Priority mail on this item. Based on your zip code to mine, 16232. Shipping weight 3-4# We package with care and ship promptly. Paypal accepted as means of payment. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb%3A%60%3E-13e169673f9-0x102-
Wilton Bench vise Machinist 4 1/2 " jaw Bullet Vise opens 8 3/4 " !!!!
Weighing in at 56 lbs! with a 4.5 inch jaw that opens just under 9 inches! A Wilton bench vise that's smooth as glass and was built strong enough to survive the apocalypse. And of course. It was built right her in the USA. Being used and decades old it shows plenty of signs of cosmetic wear. Mostly light surface rust breaking through the factory paint. Please ask any further questions you may have before bidding! This Item will be shipped via usps insured mail and will sell at NO RESERVE!
Brown & Sharpe Mini Vise #752
Brown& Sharpe Mini Vise#752 No box
VINTAGE STANLEY NO 992A MACHINIST / DRILL PRESS VISE
Estate find. This auction is for a used but in good condition Stanley no. 992A machinist/ drill press vise. not including handle the body measures 5 1/2" x 2 1/4" x 2 1/4" Jaws are 2 1/2" wide about 1 1/2" deep. Jaws open to 2 3/8" and do close tight. There are original 1/8" thick plates screwed to each jaw that I assume if removed would give you an additional 1/4" opening. besides the expected dings the vise is in good condition. Weight is 3lb.5.6oz. All my auctions are sold as found so please email all questions before bidding and thank you for looking. I offer parcel post or priority mail shipping. If it saves you money I also offer medium flat rate priority mail.
Columbian D45-M4 Swivel Base Bench Vise 5"" Made in USA
COLUMBIAN D-45-M4. IN EXCELLENT CONDITION. READY TO WORK OR BE DISPLAYED. 51810-3-Z4 STAMPED ON ROTATING BASE. SHIPPING AND HANDLING BASED ON LOCATION. THANKS AND GOOD BIDDING.
Nice Ridgid Yoke Pipe Vise Vice 1/8" to 2-1/2" for Threader Threading Cutter
Selling With No Reserve! Hi! I have for Auction here a Ridgid Yoke Pipe Vise that will do up to 2-1/2" This vise is set up to use pipes for the legs which aren't included. I will also be removing the long center pipe for easier and cheaper shipping. The one part is cracked(See Pics) but everything still appears to be in good working condition. The clamp opens and closes good. See Pictures. Get yourself a great deal here. Local pick-up is always welcome! For more information you can call Steve at: 989-802-9508. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected within 5 days. We appreciate your prompt payment. We accept payment thru Pay-pal. Cash for pick-up items.please contact us for details or if you have questions. Steve Lehman 989-802-9508 Standard Shipping: Our ... moreitems are shipped U.S. Postal Service or Fedex. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the buyer of multiple items and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 30 days. After 30 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" with no warranty or guarantee. All sales carry a 14 day return policy that covers a refund of the purchase price minus a 15% restocking fee. You will be responsible for the shipping back to us for a refund. Item must be in its original box and
8 Inch COLuMBIAN Vise
COLuMBIAN8” Vise Found this old girl at an estate auction of a farmer. This Model 508 has had very little use but because it was in a barn she has acquiredsome rust. Call her‘Bee’ short for‘Behemoth’ this 8 inch wide vise is farm fresh with some scale and some rust but very little damage, I thought about having her sand blasted but decided to sell her‘as is’ why drive up my cost. My crating, handling and shipping will be a flat $200.oo, which may sound like a lot but Bee weighs in at 177 pounds before crating so I’m guessing shipping weight will be around 200 to 220 pounds. Local pickup is available and I can deliver her as well. For a fee. From a smoke free home and ye s. I will combine shipping so if you’re planning to bid onmultiple items please let me know, I am glad to help you. All items areoffered on an as-is basis. In all cases I ... morehave made every effort to recognizethe condition and completeness of these items and disclose it(see myfeedback) I pack your item carefully with quality materials and ship fromNorth Carolina within 48 hours of payment. Please feel free toask questions. Buyers are expected to contact me WITHIN 72 HOURS. Either withPayPal payment, or when I should expect to receive payment. Which is per EBays’ guidelines. As an EBayparticipant you are expected to leave honest feedback for me once you havereceived your item as described. If a problem should exist you are to contactme as soon as possible so I can correct the issue. Once the aboveconditions have been met. Then I will leave favorable feedback for you.
Hand Vise, Vintage Machinist / Toolmaker / Jewelers No 4 Hand Vise Tool
For your Consideration is this Vintage Machinist/ Toolmaker/ Jewelers. No 4 Hand Vise. Makers name is not on tool. 1-9/16" Wide Jaws. Opens to 47/64" This tool is in good used working condition and will be a nice addition to your tool collection. S ee pictures and email with any questions Please take a look at my other Ebay Stores. I have a lot of nice items listed there. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. MB 9.3-4591 By purchasing this item the buyer accepts all responsibility for any accident. Injury or, property damage to himself or other people resulting from the ... moreuse, abuse or misuse of this item.
Vintage Wilton 3 1/2 " serrated jaws vise, excellent
Vintage Wilton 3 1/2" serrated jaws vise. Taken completely apart, immaculately cleaned, greased, painted, reassembled, working perfectly. Shipping could be less if you are closer.
Vintage Yankee Mini Machinists Bench Drill Press Vise #991 North Bros. Phila
Vintage Yankee Mini Machinists Bench Drill Press Vise. 991. North Bros. Philadelphia. 4 1/4" length. 1 1/2" wide. Jaws open 1 1/2"
16" W 14" H DoAll C-4100A HORIZONTAL BAND SAW, Autofeed Shuttle Vise, 1-1/2" Bla
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 16" W 14" H DoAll C-4100A HORIZONTAL BAND SAW. Autofeed Shuttle Vise, 1-1/2" Bla Ref# 149924 iammdna XSAWHB 14" X 16" DOALL AUTOMATIC HORIZONTAL BANDSAW MODEL: C-4100A. S/N: 504-93106, ... moreNEW: 1993 SPECIFICATIONS: RECTANGULAR. 14" X 16" ROUND. 16" BLADE SIZE. 1-1/2"W X 186"L BLADE SPEEDS INFINITELY VARIABLE. 40- 360 FPM BAND WHEELS. 21" AUTOMATIC BAR FEED STROKE: SINGLE LENGTH. 24" MULTIPLE LENGTH. 192" MINIMUM INDEX LENGTH. 1/4" MINIMUM BUTT END. 3-3/8" APPROXIMATE MACHINE WEIGHT. 6.800 LBS EQUIPPED WITH: MACHINE MOUNTED CONSOLE HYDRAULICALLY POWERED VISES AUTOMATIC SHUTTLE WITH A MAXIMUM 24" STROKE AND MULTI-CYCLE FOR LENGTHS BEYOND 24" EASILY SET" PRE SET PARTS COUNTER AUTOMATIC SHUTTLE BARFEED INCLUDES FRONT AND REAR VISES CHIP AUGER COOLANT SYSTEM ROLLER CONVEYOR 7.5 HORSE POWER BLADE MOTOR 2 HORSE POWER HYDRAULIC MOTOR* EXCELLENT CONDITION* INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE Machine Location: HARRISON. NJ Click Here For More DoAll Machines Click Here For More Saws- HORIZONTAL BAND SAWS(s) Questions about this Machine? Call Rick at(800) 873-6224 ext 7560 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click
Ridgid Model 228 Chain Soil Pipe Assembly Tool Vise Pipe Vice
Ridgid Model 228 Chain Soil Pipe Assembly Tool Vise Pipe Vice Condition: USED This unit is in good working condition we have 3 of them the photo may not be the same one you get 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and IF YOU HAVE ANY QUESTIONS PLEASE FEE L FREE TO Call us@ 248-521-7777 thank Please allow 4-6 days for shipping and handling. Thank you.
Columbian USA Woodworking Vise 11 Available
SOTTOF SALES International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Columbian Heavy Duty wood working vise. Under table mounting style. The vise jaw is 7" wide x 4" high and opens 9" the jaws are malleable iron and the model is 5-C. The condition is very good, Light rust on bare metal areas, please look carefully at all the photos and ask questions before bidding. Shipping via Fedex Ground is $35.00 to Eastern States. Approx. $27 to most Western States and approx. $22.00 to Calif. Wash. State. If you need a shipping cost for multiple vises please inquire with a zip code, thanks. D3340.33 PLEASE READ& UNDERSTAND ALL TERMS& CONDITIONS BELOW PRIOR TO BIDDING ... moreEBAY AUCTION POLICIES: Payment via Paypal. Must be received within seven days or item will be relisted. All items are being sold on an"As Is, Where Is" basis. No warranties implied or stated, unless specifically addressed in the listing. All sales are final. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please don't pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.
Vintage Heavy Duty Morgan 100A Woodworker Vise 8-3/4" Capacity 7" Jaws
This listing is for a Morgan 100A woodworker vise. Jaw width is 7" Capacity is 8-3/4" and the depth is 4" Please notice that one side of the vise is missing the wooden clamping pad. Distance between mounting slots measures 6" This vise is covered by rust on some parts. Our business. Psmsolutions2, is a sister company of psmsolutions and pleasantstmachinery. Both accounts have been in use for years with excellent seller ratings. Please refer to those accounts for a more accurate representation of our dedicated commitment to customer satisfaction. We welcome any questions that you may have prior to bidding. Feel free to send us a message or contact Steve Nelson via phone at 815-758-6534 during normal business hours. We will respond to your phone calls as soon as possible. We can guide you completely through the shipping ... moreprocess. PLEASE READ THE FOLLOWING VERY CAREFULLY: Fees: An 8.5% State of Illinois sales tax is charged for all winning bidders that are Illinois residents except for those that have a state tax ID. A $35.00 palletizing fee is required for each pallet used on LTL truck shipments The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction. If 30 days have passed since the item was paid for. The item will be considered abandoned and the winning bidder is deemed to have forfeited all monies paid to the seller. The item will then be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. Items Requiring Freight Shipment: All items are shipped F.O.B. from Dekalb. IL 60115. Many of our customers have used the following
4 PIECE SET OF VISE GRIP QUICK GRIP BAR CLAMP 12" CAPACITY
4 PIECE SET OF VISE GRIP QUICK GRIP BAR CLAMP 12" CAPACITY Click Images to Enlarge ​4 PIECE SET OF VISE GRIP QUICK GRIP BAR CLAMP 12" CAPACITY COMES AS SHOWN IN PHOTO WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 10 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for ... moreitems between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. We do NOT accept PAYPAL for items being picked up. Please contact us at info@1machinerysales.com if you would like to pick up your items. Payment Policy: PayPal: Please contact us at info@1machinerysales.com with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufac
Vintage HOWE & FOUNDRY CO. Woodworking Vise No.19797
Vintage HOWE& FOUNDRY CO. Woodworking Vise No.19797 Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Vintage HOWE& FOUNDRY CO. Woodworking Vise No. 197 This item was removed from a WORKING environment and is in good working condition. The jaws measure 7" x 4" with max opening at 6" and a 10" handle. This vise is a quality piece that was made in America and will surely give you many years of RELIABLE service. See Photos for Overall Quality and Condition CLICK HERE TO SEE OUR OTHER VINTAGE TOOLS Maplecroft Sales sells hundreds and hundreds of items each year and with this number of transactions. Occasional issues do arise. From broken roughly handled packages by the Shipper to the odd, just stopped working vintage item. Often times, these occurrences are simply out of our hands. Nonetheless, our ... moreSeller Status is evidence of the dedication from our staff to ensure that you are happy with your transaction and to receive nothing less than 5 Star positive feedback! It is vital that you as a buyer contact us as soon as possible through the"ebay message center" if you have any problems with your purchase. THANKS for LOOKING SHIPPING TERMS: All items will ship within 48 hours of payment via either UPS. USPS,or FREIGHT. The shipping price quoted above is based on average past similar shipments and other criteria and may be subject to change if extenuating circumstances, as defined by shipper) exist. The stated cost for Domestic shipments includes the Continental United States Only. Others may request cost via"My Messages" in eBay account. INTERNATIONAL: We DO NOT, under ANY CIRCUMSTANCES, ship USPS First Class for Non Domestic packages. All Non Domestic shipments ship via USPS Priority International, except Canada which may ship via UPS at our discretion. PAYMENT TERMS: In addition to our commitment of practicing only the highest standards for business and customer satisfaction. Know that all purchases are covered by Buyer Protection Plans through EBAY and
Vintage Milwaukee Woodworking Bench Vise
Up for auction is a very nice Vintage Woodworking Bench Vise! The Vise was made by Milwaukee Tool& Equipment Co. The only markings found on the V ise(besides the barely readable sticker) are V 50 and V 51. Possible part numbers. The Vise is used and in great working order. However. The crank is slightly bent on one end. Not sure if it was manufactured that way. A very handy yet heavy-weight workshop bench vise. The vise weighs approx. 12 1bs. It measures 7" x 5" at the face and is approx. 13" long. NOTE: Please review the pictures. U se your expertise on this type of vise when bidding. A great Father's Da y gift to himself! Small print: Please be sure that you can use this Vintage Vise. It is an estate item and I cannot accept a return. No returns accepted. Please e-mail me with any questions. Thank you for looking! ... moreHappy bidding!
Vintage Butcher Block Table Work Bench Machinest 2 Drawer Electric Vise
This has been used as a work bench Would also make a great farm kitchen table. Or pizza or bakery, butcher block, do some revisions to it and it would be fab Measures approximately 48" wide. Ground to top of butcher block 40" butcher block is 2 1/4" thick You may pick this up in Key Largo Or buyer to arrange and pay for blanket freight
Universal Vise Corp #500 Fly Tying Kit 100% complete and Original Nice Set!
Nice complete Fly Fishing Fly Tying kit with everything you need! Look at pics and box for item list. All items are in orignal unopened bags that are fastened to inside of box.
SUPREME FLY TYING KIT Vast Assortment feathers tools vise books 48 ITEMS
Supreme Fly Tying Kit that includes a vast assortment of fly tying material and tools. I don't know anything about fly tying. But will list the items in this auction below: Universal Fly Tying Guide by Dick Stewart Bass Flies Book by Dick Stewart Fly Master Vise Hen Patch Nymph Hooks Water Base Head Cement Bodkin Hair Wire Bobin Two Dry Fly Neck Duck Quills Hackle Plier Mallard Imitation Wood Duck Three Spools of thread Peacock Marabou 4 spools of assorted flo ss Muskrat Blended Rabbit pale yellow Blended Rabbit olive Blended Rabbit pink fox Wood and Chenille 2 spoons of tinsel Wax 3 bags of bucktail L AC applicator Scissors Stripped Peacock Deer Body Hair TI-Rite Eyes Turkey Quill 4 packs of Saddle Grizzly Dry Fly Ring- necked tail 2 packs Duck Quills Streamer Hooks Silver Pheasant Dry Fly Hooks Wet Fly Hooks Floating Jig Heads Perfect ... morePoppers 2 packs Blue Gill Special Wildcat Spook Sili Legs Fly Hooks size 8 Jig Heads Please let me know if the shipping charge is too high- just send your zip and I will recalculate.
X92 CRAFTSMAN DRILL PRESS VISE 3" STANDARD GENERAL PURPOSE VISE
YOU ARE LOOKING AT A CRAFTSMAN DRILL PRESS VICE. OPENING: 3" WIDE X 3" LENGTH X 1 1/2" DEEP. AS PICTURED THERE ARE SOME NICKS AND DENTS ON THE JAW OPENINGS. OTHER THAN THE LISTED THE UNIT IS USED BUT IN GOOD COSMETIC AND WORKING CONDITION. GREAT DEAL. CATCH IT FAST! PLEASE READ AHEAD FOR ADVISEMENT AND CONSENT BEFORE PURCHASE OR BID: COMPANY: WE ARE A SURPLUS/LIQUIDATION SELLER. WE LIST AND DESCRIBE TO THE BEST OF OUR ABILITY AND KNOWLEDGE. IF YOU HAVE A QUESTION DO NOT HESITATE TO ASK WE WILL GIVE YOU THE BEST ANSWER POSSIBLE. WE ARE A BUSINESS AND ONLY OPERATE MONDAY THRU FRIDAY, PLEASE WAIT FOR A BUSINESS DAY FOR COMMUNICATION AND RESPONSE TO ANY MESSAGES OR CONCERNS ITEM CONTENTS: ONLY WHAT IS PICTURED AND DESCRIBED IS INCLUDED. IF IT IS NOT PICTURED OR LISTED IN DESCRIPTION IT IS NOT INCLUDED. TERMS: ALL ITEMS NEED TO ... moreBE PAID FOR WITHIN 72 HRS. OF AUCTIONS END/ BUY NOW. IF REQUIREMENTS ARE NOT MET YOU FORE-FIT YOUR RIGHT TO THE ITEM, AT DEADLINE POINT WE HAVE THE RIGHT TO REFUSE SALE AND CANCEL THE TRANSACTION AT ALL TIMES. SHIPPING: WE ONLY SHIP TO THE UPPER 48 STATES. ALL ITEMS ARE SHIPPED WITHIN 48 HOURS OF PAYMENT CLEARING. INSURANCE COVERAGE IS ONLY INCLUDED IN SALES TOTALING $99.99 AND UP. TRACKING NUMBERS ARE PROVIDED ON REQUEST AND VIA PAYPAL. RETURNS/REFUNDS: FIRST AND FOREMOST YOU MUST CONTACT US( 720-212-8328 OR 303-718-7834) AND STATE YOUR CONCERN BEFORE MAKING A RETURN. RETURNS MUST BE MADE AWARE OF AND ARE ACCEPTED WITHIN 14-DAYS OF ITEM BEING DELIVERED. ITEM/S MUST BE SHIPPED BACK WITH THE ORIGINAL CARRIER UNDER THE SAME DELIVERY METHOD(I.E. IF IT WAS SHIPPED UPS GROUND IT MUST BE RETURNED UPS GROUND) ORIGINAL BOX MUST BE SENT BACK(IF BOX IS DAMAGED WE STILL REQUIRE IT TO BE SHIPPED BACK) IF APPLICABLE ALL HARDWARE AND PAPER WORK MUST BE RETURNED. IF THE ITEM DOES NOT WORK FOR YOUR ACCOMMODATIONS AND IS AT NO FAULT TO US OR THE CARRIER. YOU WILL BE RESPONSIBLE FOR ALL SHIPPING CHARGES INCLUDING OUR INITIAL SHIPPING CHARGE(WE USE THE MOST ECONOMICAL/CONVENIENT SHIPPING METHOD AT
VINTAGE TABLE CLAMP FLY FISHING JIG,CLAMP,VISE,
VINTAGE TABLE CLAMP FLY FISHING JIG.CLAMP,VISE, PLEASE Leave feedback on you purchase. We leave feedback as soon as payments recorded. In the rare case somethings wrong. Please contact us, and I will resolve the situation right away. Please if you have a question on one of our items. Email me and I will respond right away. All our items are used and descibed to the best of our ability. we will combine shipping on most items. But because of weight's or box's, you must let me know before you purchase for exact pricing. Please visit(36again) for more Great Listings
RIDGID 40A TRISTAND PIPE BENDING YOKE VISE
Used Ridgid Model 40-A Portable TriStand Yoke Vise 1/8" 2 1/2" Capacity•Complete with slots for hanging tools. Pipe rest, three-pipe benders and ceiling brace screw•Integral legs and tray fold in for easy carrying and setup•Large vise base overhangs front legs for clear tool swing
VINTAGE FLY TYING LIGHT LAMP FISHING DESKTOP DESK TOP CLAMP LIGHTING VISE TOOL
We picked this up at an estate sale recently w/ some fly fishing gear. Vintage fly tying light/holder. Table top clamp unit. Sure hope you can use it! Enjoy. Item condition below. By bidding on this item it is agreed upon that you have read this entire post, have viewed all/any supplemental pictures/videos, and have exhausted any questions about this item you may have in regards to this item. There are two ways to describe an item. One way is via text. The other way is via photographs. Use both to familiarize yourself w/ this product before purchasing. If it's not in the pictures. Its not included. All item sold as is. As shown, untested, without any expressed or implied warranty or guarantee unless otherwise noted. Please be advised that items designated in eBays'USED' or'PREVIOUSLY OWNED' items will to some degree show ... moresuperficial signs of normal use such as scuffs. Scratches, chips, creases, small dings/dents, rust, spots, stains, dirt, dust, signs of installation and removal, previous owners name/initials and age, even if you cant see them in the pictures, and may have wear to moving parts that you would not expect from purchasing a new item.and any more note worthy condition issues than such will be mentioned above. This would also of course apply to any vintage or antique item as well. Furthermore, to keep costs/overhead down and pass the savings on to you(the buyer) we may not always clean our items prior to listing, so used items may need cleaning. Look at pictures above. If this is something that concerns you, we would advise you purchase a new item. At AuctionBlockOnline. We understand that to buy a previously owned item you have not seen, from an eBay Seller you have not met, requires a leap of faith. That is why we make every effort to accurately and fairly describe our items to our customers via text and to accurately represent the item via numerous photos, to the best of our ability. However, with all pre-owned or used items, the condition is subjective. Any errors are unintentio
Nice Vintage Original Thompson Model "A" Fly-Tyers Vise In Original Box Elgin IL
Nice Vintage Original Thompson Model"A" Fly-Tyers Vise In Original Box Elgin IL Up for bids is a Vintage Fly Tying Vise in the original Box. See Photos: a Nice Vintage Original Thompson Model"A" Fly-Tyers Vise In Original Box Elgin IL. It is in Excellent condition. Any questions please email. All items are sold as-is. So PLEASE ask all questions before bidding. Photo is of actual item in this auction. Some Items may need cleaning. We will list in the condition brought to us. We would hate to ruin any Patina that would lower the value. THIS ITEM IS FROM A PRIVATE ESTATE. We WILL BE LISTING MORE ITEMS FROM THE LADY’S COLLECTION Multiple purchases please wait for adjusted bill before paying. We will figure new combined weight and best shipping to your Zip code. Powered by The free listing tool. List your items fast and easy ... moreand manage your active items.
regal petal fly tying vise (non-rotating)
Regal petal vise. Non-rotating. Excellent condition. Slight bluing wear at tip.
Vintage Fly Tying Fishing Lure Vise Alligator Clips Clamps Tool Jig
This auction is for a vintage clamp/ vise for tying fishing lures. It has a heavy metal black base. This could be used by hobbist/ model makers. Or for soldering of small parts. I believe the middle section could hold a magnifying glass(not included) for seeing small parts. The alligator clamps are about 10" apart when stretched out. Ask any questions.
Vintage 1968 DH Thompson Model B Fly Tying Vise - Fly Fishing
Vintage 1968 DH Thompson Model B Fly Tying Vise- Fly Fishing This is a Vintage 1968 DH Thompson Model B Fly Tying Vise- Fly Fishing. Good condition with light use but there is a little surface pitting. Works and functions perfect. Terms For This Auction Payment is expected through PayPal within 48 hours of end of auction. You can pay through PayPal using your credit card. Electronic check or a direct transfer from your PayPal account. Before bidding, please review all components(photos, text, terms, etc. of this auction and bid carefully and ask any questions before bidding. All items are described to the best of our knowledge, if any item is not as described, please contact us immediately. we are happy to resolve an issue of any misrepresented item. This item is being sold as is. And thus, no returns unless the item is not as described or ... moreis misrepresented. If this is the case we will offer a full refund upon receipt of the returned item. International Buyers– Please Note: Happy to quote postage via email if the shipping detail and costs do not appear in the auction. Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Please be patient!International delivery sometimes takes up to 4 weeks due to your country's customs policies and regulations. Payment is expected through PayPal within 48 hours of end of auction. You can pay through PayPal using your credit card. Electronic check or a direct transfer from your PayPal account. gsrx_vers_486(GS 6.5.1(486)
DH Thompson Pro Series Fly Tying Vise - Fly Fishing
DH Thompson Pro Series Fly Tying Vise- Fly Fishing This is a DH Thompson Pro Series Fly Tying Vise- Fly Fishing. Excellent condition with very light use…just a bit dusty from storage. D.H. Thompson created modern fly tying with the invention of the"collet" type vises. These cam-operated vises have special steel collets with tapered necks which are drawn into compatible tapered sleeves of hardened steel. To close the jaws. The single action of the cam lever is enough to grasp or release the hook. The Pro vise is the perfect for any skill level. It gives beginners professional results. Terms For This Auction Payment is expected through PayPal within 48 hours of end of auction. You can pay through PayPal using your credit card. Electronic check or a direct transfer from your PayPal account. Before bidding, please review all components(photos, ... moretext, terms, etc. of this auction and bid carefully and ask any questions before bidding. All items are described to the best of our knowledge, if any item is not as described, please contact us immediately. we are happy to resolve an issue of any misrepresented item. This item is being sold as is. And thus, no returns unless the item is not as described or is misrepresented. If this is the case we will offer a full refund upon receipt of the returned item. International Buyers– Please Note: Happy to quote postage via email if the shipping detail and costs do not appear in the auction. Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Please be patient!International delivery sometimes takes up to 4 weeks due to your country's customs policies and regulations. Payment is expected through PayPal within 48 hours of end of auction. You can pay through PayPal using your credit card. Electronic check or a direct transfer from your PayPal account. gsrx_vers_4
D. H. THOMPSON CAST IRON VISE - UNUSUAL JAWS - WORKS GREAT - REASONABLE
WHY BUY AN EXPENSIVE SECOND VISE? JUST GETTING STARTED? THIS IS A TERRIFIC VISE AND WILL ALWAYS WORTH ABOUT WHAT YOU PAID FOR IT. MADE IN U.S.A. AND THE QUALITY IS MUCH HIGHER THAN CHEAPO IMPORTS
RIDGID TRISTAND 40 A VISE PIPE CLAMP THREADER
Used but good usable condition rigid tristand 40 A with vice. Did not try to clean or make it look better you see it at its worst came from a contractor the closed they were using it at that time. Shipping and pickup from zip code 46168. At 45 pounds if you need further information please ask Powered by The free listing tool. List your items fast and easy and manage your active items.
Herter's Fishing Fly Tying #11 Vise w/Supplies, 1959 in Box, No Res.!
Fly Tying Gear Vintage Herter's fishing fly tying gear. Includes a Herter's No. 11 vise and much other stuff. Please see pics. All in original Herters factory packaging with 1959 postmark. TERMS: No Reserve Auction- Buyer pays the shipping fee listed. This includes tracking. A ll forms of payment are accepted and shipping can be combined on multiple items. If you don't have a PayPal account. Other credit cards can be used via the eBay'Pay Now' button, which will automatically direct you to a secure credit card checkout. If foreign shipping is offered the foreign shipping fee will be listed. Foreign shipping fee is NOT negotiable. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with ... moreyour country's customs office to determine what these additional costs will be prior to bidding/buying. If you request delivery to an address that is different than your confirmed address. We assume no responsibility. Payment is expected within 7 days. Items are honestly described to the best of our ability. But please do not presume we are experts on these items. All items are sold as-is. And all sales are final. Unless the item is materially different from that described in the auction listing. There are no returns. Buyer is responsible for return shipping fees. If you have any questions. Do not hesitate to ask before you bid and please read the entire listing description thoroughly. You get the exact item pictured. We do not offer an“inspection” period. Personal pick-up of items are not offered. Bid with confidence.
Vintage? Small Bench Vise - Gunsmith? - Jewelry? - Blacksmith - Versa Mount?
Old small vise. No markings, 6 inches tall by 1 and 3/4 inches wide(at jaws) spring loaded jaws open up to 2 inches, one side of the jaws flat, the other side has 3/16 inch half round grooves to hold smaller round objects. Mounting hole is 5/8 inches inside diameter(much like a Versa vise and I do not know if it works with a Versa) Used, missing some paint, no cracks, works fine. $12.35 shipping and handling in the USA lower 48 states, actual shipping/ postage every where else. Payment due within 24 hours of auction closing. As Is Auction, No Returns, No Refunds. Questions? More photos? Please ask. Thanks For Looking!
MACHINIST TOOLS LATHE MILL Columbian Number 6 Vise 6 1/2" Jaws
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.LL
NICE MILLING MACHINE VISE, , HEAVY DUTY !!!! SMOOTH ! LQQK... FREE SHIP !!
i have this used but in excellent shape heavy duty. Palmgren milling machine vise. model 76. jaws are 1" thick and 2" tall and 6 1/2 wide. opens to a whopping 5 1/2 inches, it has automatic locking devise, very nice once you have your material clamped in. total dimentions are 9" X 18" includes handle. total weight is 100 lbs. works very smoothly! if you need a nice heavy duty vise that works excellent, this is the one. FREE SHIPPING! thanks for looking!
Columbian 5 1/2" D45 M5 USA Made Bench Vise w/ Swivel base
Columbian Vise 5 1/2" D45 M5 USA Made Nice Bench Vise w/ Swivel base
PANAVISE # 305/366 LOW PROFILE SWIVEL/WIDE OPENING VISE, COMPLETE KIT
305 IS THE LOW PROFILE SWIVEL/TILT ATTACHMENT WHICH HANDLES AN ARRAY OF PANAVISE OPTIONS#366 IS THE VISE/CLAMP WIDE OPENING OPTION USED HERE GREAT FOR HOBBY.WORKSHOP OR INDUSTRIAL ENVIRONMENT CAN BE USED MOUNTED OR NO T TO BENCH A WORK VISE TO BE PROUD TO OWN FOR THE PERSON ON A BUDGET
Portable Vacu Vise 2 1/2"-3" Jaw Suction Base Chrome Vintage W/Box 600V
Portable Vacu Vise 2 1/2"3" Jaw Suction Base Chrome Vintage W/Box 600V 7 1/2 x 4 1/2" please refer to all pictures and ask questions before bidding see my return policy PAYMENT DUE IMMEDIATELY UPON WINNING A BID Buy Now Means Pay Now if i send out two invoices as a reminder with no response the item will go to second chance or be relisted and a case will be opened up fast shipping extra care in packing thanks so much for shopping with us pay pal only On Apr-11-13 at 19:00:00 PDT. Seller added the following information:
Antique Columbian Post Leg Shop Bench Blacksmith Welder Vise Tool USA 42 Pounds
i000000. Antique Columbian Post Leg Shop Bench Blacksmith Welder Vise Tool USA 42 Pounds Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Antique Columbian Post Leg Shop Bench Blacksmith Welder Vise Tool USA 42 Pounds Vise 41" tall- Vise jaw 5" width of tool 17" Handle 12" Base marked 10 Markings do have some wear- The Columbian Vise MFG. Co- Cleveland Made In USA Still see hints of original red paint- needs to be cleaned. Has rust- Please view photo's they can tell you more than I can about the vise. I didn't get a photo of the vise open and vise already packaged to ship. Sorry some of the photos are blurry Box weighs 45 pounds If you are viewing my auction from a i phone. Tablet or wireless ... moredevice, there is a glitch that will say shipping is free- Shipping is not free- Shipping rates have once again went up. Please keep this in mind when using the 5 star rating system offered through ebay. The cost of shipping is out of my hands and is solely designated by the US. Postal Service. US Buyers- All glass items will be insured. The Postal Service Is Accountable for any Breakage and claims are to be made by the buyer International Buyers: Buyers are subject to all import duties or taxes that might be levied on items. Please do not ask me to falsify price or value information on custom forms. This is a violation or Federal Law. Please view my other auctions for more vintage items Gladly Combine shipping. I will combine shipping for multiple items that can fit into one box If you win multiple items. Please wait for a combined shipping invoice International Shipping: Any item that weighs 4 pounds and over. Postal service requires items to be shipped priority mail only. Under 4 pounds items can be shipped International first class. Thanks for looking! Buyer to pay all shipping cost. If you win multiple items please wait for a combined shipping invoice. shipping will be deter
Vintage Prentiss No. 355 Vise 5 inch Jaw
Prentiss No. 355 vise available. Date of manufacture unknown. Believe Prentiss made vises from 1800's up to the 1940's. 5 inch jaw. Condition: Still in use. u BidOnline Item Number: 040212-4 You are bidding(1) Vise. You are bidding on ONLY what you see in the photos. We make every effort to communicate all of the details to make an informed decision. However, verification and perceived value may vary. If a condition or features are provided, they are ONLY done so as a COURTESY. You as a buyer are expected to know what you are purchasing and understand that all items are sold“as is, where is, with all faults” The more informed you are, the better your purchase decision. Since your needs are unique to you, your evaluations will be different from others. This item was purchased for resale and was NOT used by seller. This item can be ... morepreviewed and inspected by appointment only at our location in Chatsworth. CA. If you have any questions. Please contact us. Please ask ALL questions prior to bidding! Since I am not a dealer. This units is sold" As-Is" with"N o Warranties" and"A ll Sales are Final" You may pay by personal/ company check. Cashier's check, or Pay Pal. Note: Merchandise will be held until funds clear. Buyer is responsible for ALL shipping& handling fees. Handling Fee: $15.00 Shipping Information: Pick-up location: Chatsworth. CA CUSTOMER PICK-UP PREFERRED Insurance Required: Varies on the selling price. Buyer releases Anthony Bertolino and/or Bertolino's. Bertolino Sales from any liabilities from this unit. All liabilities will be the responsibility of the buyer. Merchandise must be paid for within 3 days. Happy Bidding!
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.