In 
 
Order by: 
Available to: 
Price: 
 - 
$
327.75
Buy It Now
$95.00 Shipping
Condition: New
Location: Hayward, United States
Power Type: pneumatic. Easy to adjust output, simply adjust the air pressure to reach the desired pressure is adjustable, high yield. Equipped with anti-rotation ... moreguide rods, guide plate, high precision, able to adapt to high-speed precision punch overload.
$
4000.00
Buy It Now
Condition: Used
Location: Coffeyville, United States
Approximate weight: 640 lbs. 18BS - 60 : MODEL. 12910 - SERIAL. 24" THROAT DEPTH. 18 PUNCH & DIES. WILL PUNCH TO THE CENTER OF 48" SHEET OF MATERIAL. ... moreHAND / MANUAL.
$
999.00
Buy It Now
Free Shipping
Condition: New
Location: China
This puncher is a dedicated busbar installation, punching machines and tools required to complete pump(manual pump, pedal pump, electric pump and so on). ... moreIt is much safer and cleaner while operation.
$
1999.99
Buy It Now
$325.00 Shipping
Condition: Used
Location: Milton Freewater, United States
This listing is for a Wiedemann R2 Turret Punch Press 5 Ton. This press was removed from a working environment and is in great working condition. Locking ... moremechanism. Rotation of the turret and cranking of the lever all work smoothly. Specifications 12 Stations Manual punching using the hand lever Center of punch to the frame 12" Stroke is 3/4" Dimension of unit: 26" x 58" x 21" Weight is approximately 600 Ibs This punch press includes the following ten punches and dies: 1/8" x 1/8" 5/32" x 1/8" 3/16" x 3/16" 1/4" x 1/4" 5/16" x 1/4" 3/8" x 1/4" 7/16" x 3/16" 5/8" x 1/8" 3/4" x 1/8" 1-1/4" x 1/8 There are two punches and dies missing from this item. As shown in the photograph each station is punched with the size punch and die in that station. If you have any questions about this item please contact us by phone or email. This is advertised as local pick-up only but we will 100% ship it to your door. Please contact us for shipping quotes. Also don't forget to take a look at our store for more great items listed daily. Thanks for looking! Item comes exactly as shown in the photographs. WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidd
$
1305.00
Buy It Now
Condition: Used
Location: Dos Palos, United States
Rouselle punch press 15 Ton , Sheet Metal Single Punch similar to Diacro , Strippit, Amada. I have some tooling to go with it . I’m not sure of the weight ... moreLocal pick up , cash in person If you need it shipped, contact us before buying Worked perfect when last hooked up No returns , no warranty, sold as is where is If you have 0 zero feedback do not bid andIf you don’t follow through with buying items do not bid
$
950.00
Buy It Now
Condition: Used
Location: Santa Ana, United States
Our inventory is updated daily. We'd love to help you find it. Ask us about our Finder's Fee Program. For Over 15 Years. Motor1 HP / 1200 RPM.
$
2300.00
Buy It Now
Condition: Used
Location: Vancouver, United States
$
1850.00
Buy It Now
Condition: Used
Location: Martin, United States
New Motor 3 phase 440/220.
$
1300.00
Buy It Now
Condition: Used
Location: Long Island City, United States
This is a foot-operated Foot/Kick Press by Excelsior in good condition! Available for local pickup only in Long Island City, NY.
$
1500.00
Buy It Now
$2900.00 Shipping
Condition: For parts or not working
Location: Chino Hills, United States
W.A. WHITNEY, 615-A PUNCH PRESS, 15 TON, does not turn on. The hydraulic pump turns on and spins, i do not know how to wire machine to see if it works ... morecorrectly.
$
2600.00
Buy It Now
Condition: Used
Location: Plymouth, United States
Very Good used Whitney-Jensen Model 027 Punch Press-Full Throat Depth 24" Will Punch Mild Steel 2" thru 1/16". Depth of throat without tie plates 24". ... moreHeight of throat 6 1/4". Height of punch only 23" Height mounted on stand is 42".
$
5950.00
Buy It Now
Condition: Used
Location: Toledo, United States
MODEL. C45. BED AREA. 29.5" X 18". BED HEIGHT. 35.625". CAPACITY. 45 TONS. MOTOR. 5 HP. BOLSTER THICKNESS. NEW. . 1966.
$
1699.99
Buy It Now
Condition: Used
Location: Findlay, United States
4" Throat (to center of punch). Includes new punch retaining nut. (Not pictured). No sales outside of the United States.
$
11.99
Buy It Now
$4.95 Shipping
Condition: New – Open box
Location: Chillicothe, United States
We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
$
210.00
Buy It Now
$67.11 Shipping
Condition: For parts or not working
Location: Smyrna, United States
Well, I will give you a few reasons:1. You ended up on this page because you are searching for aCybelec DNC 800. MODEL: DNC 800. MANUFACTURER PART NUMBER: ... moreDNC 800. NO CPU module included. More about this item:DEFECTIVE ITEM, REPAIR REQUIRED.
$
192.70
Buy It Now
Free Shipping
Condition: New
Location: Hayward, United States
352lb/160kg Pressure Pneumatic Punch Machine. Main motor power 110V(KW). 230120 352lb/160kg Pressure Pneumatic Punch Machine 1 Set. 2, simple structure, ... moreconvenient operation, cheap price, superior performance, no noise produced during the hydraulic system and electric standby, can save electricity consumption reduce production cost, has the very high cost performance;.
$
209.99
Buy It Now
Free Shipping
Condition: Used
Location: Montgomery Center, United States
$
12500.00
Buy It Now
Condition: Used
Location: Toledo, United States
Ram Stroke. 0"- 15". Pressing. 25 IPM. Model. 200 CF. Motor. 30 HP. Open Height. Ram Size(L-R, F-B). 15" x 15". Bed Size(L-R, F-B). 48" x 24".
$
6499.99
Buy It Now
Condition: Used
Location: Middlebury, United States
Country of Manufacture: United States. Unless otherwise specifically agreed to in writing by. Model: 21 M. Need it urgently?. Call us and we will do what ... morewe can to get it to you quickly. To get a freight quote we will need to know the following.
$
130.00
Buy It Now
Free Shipping
Condition: New
Location: United States
Specifications: Voltage: 110V Current: 50mA Power Source: Pneumatic Nominal force: 2kN Cylinder bore: 63mm (2.5") Cylinder stroke: 75mm (50mm Adjustable) ... moreAir pressure: 0.4 to 0.7Mpa Maximum air consumption: 0.62L / time Holding time: 0.1s to 99.
$
764.00
Buy It Now
$150.00 Shipping
Condition: Used
Location: Gainesville, United States
Punch capacity 16 gauge mild steel. Good used condition - Works well! Punch No. 1.
$
3950.00
6d 13h 26m 54s
0 bids
Condition: Used
Location: Murrieta, United States
Press Model: 6. Nonnage: 60. We accept all card types. 4% fee for use of Credit Card. Use of Debit Card is free. ACH Wire transfer accepted. Purchasing ... moreInformation Serial No: 17286.
$
45.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Ventura, United States
Model: 2025. We're down to earth, easy to work with people.
$
45.00
Buy It Now
$25.41 Shipping
Condition: Used
Location: Portland, United States
This is Nice! Real good shape as you can see. Hard to find at this price in this nice of shape! Payment: All payments must be received within 1 day of ... morethe end of the auction. Seller retains all rights to withdraw an auction or deny sale of the merchandise. A Positive Feedback will be left for all successful transactions. By placing a bid on this auction. You agree to all the terms and conditions of the auction. If you have any questions or concerns please ask us before placing bids. PAYPAL only. Ship to confirmed/Verified address only. No Personal checks. Shipping: Item Shipped from: Portland. OR. USPS,UPS, or other qualified carrier at my discretion. Usually UPS Ground. Item will be shipped within two business days from the completion of auction. Order will be processed within two business days. I ship to PayPal Verified/Confirmed address only. No Exceptions. If a package is returned to us due incorrect address or recipient non-availability to accept. There will be a shipping charge to ship package for the second time even if the original sale was shipped free of charges. Terms of Sale: Email confirmation must be received within 24 hours after the end of auction! Warranty through manufacturer if available. If you do not agree with any above terms. Please do not bid.thanks.
$
125000.00
Buy It Now
Condition: Used
Location: Scottsburg, United States
Millutensil Die Mold 4 Post 150 Ton Spotting Press. Good working press. Located in Scottsburg IN 47170 Thomas Plastic Machinery
$
52.99
Buy It Now
Free Shipping
Condition: Used
Location: Ventura, United States
Title: Amada Strippit Wilson (073801) 82380 90 Degrees Press Brake V-Punch Block Die 29 TON/ Foot. Model: 82380. MPN: 82380. We're down to earth, easy ... moreto work with people. PRODUCT INFORMATION.
$
300.00
Buy It Now
Condition: Used
Location: Oxnard, United States
$
42.00
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Winnetka, United States
Federal Presses Parts No 1 to 7 Openback Inclinable Punch Press Manual. I’ve read Parts of these Programming and Operations Manuals. There are So Many ... morePossibilities. Parts Lists. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy.
$
7500.00
Buy It Now
Condition: Used
Location: Jackson, United States
EQUIPPED WITH WITH 4-1/4″ WIDE SINGLE ROLL FEED ORIGINAL ELECTRICAL PRINTS FROM MINSTER. SPEED450-900 SPM. CAPACITY32 TON. Free loading on your truck. ... moreLOCATIONTHIS USED PRESS IS LOCATED IN OURJACKSON, MI COOPER BUILDING.
$
331.19
Buy It Now
Condition: For parts or not working
Location: Baroda, United States
If you are not able to pick up locally, we are able to get competitive freight quotes as well. This item is listed for free local pickup.
$
645.05
Buy It Now
$95.00 Shipping
Condition: New
Location: Rancho Cucamonga, United States
2205Lbs/1000kg Pneumatic Punch Machine. Power Type: pneumatic. Easy to adjust output, simply adjust the air pressure to reach the desired pressure is ... moreadjustable, high yield. Equipped with anti-rotation guide rods, guide plate, high precision, able to adapt to high-speed precision punch overload.
$
34.19
Buy It Now
Free Shipping
Condition: New
Location: Yamuna Vihar S.O, India
Engineers Bell Shaped Punch for marking center. BELL PUNCH. Capacity upto 35 mm Round bar. Very handy when drilling into round bar. MADE OF GOOD QUALITY ... moreSTEEL, PIN IN HARDENED AND GROUND. We will not be responsible for any import duties.
$
999.99
Buy It Now
Condition: Used
Location: Millersburg, United States
Used in good working condition 5 ton 3" stroke 3" throat 7" between top and bottom plate 6" x 6" exposed bottom Contact us for a freight quote or set ... moreup your own Skid size is 32" long 30" wide 12" tall 190 lbs. .
$
350.00
Buy It Now
Condition: Used
Location: Oxnard, United States
$
4950.00
Buy It Now
Condition: Used
Location: Jonesborough, United States
Mubea Deep Throat Hydraulic Punch Model HP 350/600. Very nice, very clean machine. punch up to 1 1/8" through 3/8. Throat depth 610mm. This machine is ... moresubject to prior local sale! Foot switch. 3 KW motor d320452 power.
$
7500.00
Buy It Now
Condition: Used
Location: Toledo, United States
MODEL. . BSTA 30. CAPACITY. . 30 TON.315" TO 1.57" ADJUSTABLE. Machinery functions as it should. Machinery professionally removed from service for resale. ... moreYoder Brothers Machinery.
$
6499.99
Buy It Now
Condition: Used
Location: Middlebury, United States
Model: 3FW. Country of Manufacture: United States. Unless otherwise specifically agreed to in writing by. Size: Length: 36 in. Width: 46 in. Height: 75 ... morein. Prefer to pick it up yourself?. To get a freight quote we will need to know the following.
$
890.00
Buy It Now
Condition: Used
Location: Glassboro, United States
Your Best Work Starts Here™. Be sure to add us to yourfavorites list !
$
216.04
Buy It Now
Free Shipping
Condition: New
Location: United States
Package Included: 1× Pneumatic punching machine 1× Air source filter (separating water, oil) 1× Foot switch 1× Power cord 1× Instruction manual.
$
99.36
Buy It Now
$18.10 Shipping
Condition: For parts or not working
Location: Fairfax, United States
You are purchasing one used ROTARY UNION 1/2" NPT Fits Amada Turret Punch Used CORE FOR REBUILDING and UNTESTED it has a snapring that looks like it needs ... moreto be replaced see pictures, we have not tested it in any way Removed from spare parts crib at Phillips Lighting plant complete facility closure Condition is Used. Shipped with USPS Priority Mail. PH0339
$
4250.00
5d 18h 2m 19s
0 bids
$99.95 Shipping
Condition: Used
Location: Westminster, United States
All Tooling is in overall great condition. A few pieces may have surface oxidation from storage. Every piece is either stamped or etched with the sizes. ... moreI don't know much about this type of tooling other than the research I've done online.
$
1500.00
Buy It Now
Condition: Used
Location: Muskegon, United States
Up for sale is a good used Bimba Pneumatic Forming Punch Press Bore 5 - 9,000lb Capacity. These units are custom made and very heavy duty. We have many ... moreavailable as well as different tonnage. The item received may not be the exact item pictured but all are in like condition.
$
1000.00
1d 6h 33m 0s
0 bids
$1300.00 Now
Condition: Used
Location: Tupelo, United States
AUTOMATIC OBI STAMPING PRESS. NIBLOCK MACHINERY, LOSHBOUCH JORDAN, PHASE 3 YOU ARE BIDDING ON: 1- AUTOMATIC OBI STAMPING PRESS. NIBLOCK MACHINERY, LOSHBOUCH ... moreJORDAN, PHASE 3, HP 1 USED PRESS, UNKNOWN ON THE TON, PRICED CHEAP FEEL FREE TO MAKE OFFER. NO REASONABLE OFFER REFUSED PLEASE FEEL FREE TO ASK QUESTIONS! International buyers. We will ship worldwide, contact us before you make your purchase for an international shipping quote. If not listed as new PLEASE make sure you understand the following: They are from a working environment. They are untested and sold as-is. This means they may work fine they may not work at all. ALL ITEMS MAY HAVE LIGHT SCRATCHES. MAY HAVE SOME SMALL DENTS OR WARE. WE TRY TO PICTURE THEM TO REPRESENT THE CONDITION THE BEST WE CAN. IF YOU NEED MORE DETAILED PICS DO NOT HESITATE TO CALL OR CONTACT US. Monday-Friday 8a.m-5p.m Eastern 1-855-869-6191* WE WILL ENTERTAIN ANY OFFERS* PLEASE CONSIDER THE FOLLOWING WHEN BUYING ITEMS. WE ARE A RESALE WAREHOUSE. WE DO OUR BEST TO DESCRIBE EACH ITEM IN ITS TRUE CONDITION! Freight: Freight prices listed apply only when being shipped to a commercial address that has a loading dock and a receiving forklift. Shipping anywhere that doesn’t have these. Please contact us so we can requote the shipping costs. If you have any question please call JAY Cell 1-574-312-4837 Office 1-855-869-6191 Please check us out on Facebook and“LIKE” us! http:www.facebook.com/RCRecycling Thanks Again RC Resale Warehouse Location: D-Room Listed By: OBE We gladly accept PayPal. Certified Funds, or Cash for local pickups. Shipping price shown is for shipping in the US to lower 48 states only. Please ask us for shipping quotes on any item you want shipped anywhere else. We usually ship items on the day payment is received. Our hours are from 8am-5pm Eastern time. Contact us about combined shipping rates. All items come with a 14 day gurantee unless stated in listing. Buyer pays return shipping unless stated otherwise. NO RESTOCKING FEE. FREIGHT SHIPMENTS Large ite
$
32500.00
Buy It Now
Condition: Used
Location: Pomona, United States
Manufacturer: Minster. Wheeler Machinery Sales, Inc. Air Counter Balance. Ram Stoke: 3". Ram Size (L-R, F-B): 24" x 14". Shadow VI Light Curtains. Bed ... moreSize (L-R, F-B): 32" x 21". Tonnage: 60.
$
4500.00
Buy It Now
Condition: Used
Location: Piedmont, United States
Roper Whitney Pexto 134 punch press. Referral local pick up or assist buyer with loading and shipping at buyers expense. Also for sale locally.
$
12998.00
Buy It Now
Condition: Used
Location: Drumright, United States
$
12501.00
Buy It Now
Condition: Used
Location: Holland, United States
STROKE. 1". PALM BUTTONS. 10.5" X 16". Tonnage 60 tons. MOTOR. . 5 HP. SHUT HEIGHT. 17". (2) @ 3" THICK EACH (6" TOTAL). Type (BG, Double Action, FW) ... moreflywheel.
$
297.50
Buy It Now
Condition: For parts or not working
Location: Osseo, United States
ARIES ENGINEERING CO. Maple Grove, MN 55369-4551. 8808 Monticello Lane North.
$
183.00
Buy It Now
$22.00 Shipping
Condition: Used
Location: Chandler, United States
Vintage Greenerd No 1 Arbor Press Red Steel 1/1 On eBay. See the pictures for the condition. For additional questions or pictures please reach out.
$
19500.00
Buy It Now
Condition: Used
Location: Toledo, United States
OBI (OPEN BACK INCLINE). STROKE LENGTH. 3". SHUT BED HEIGHT OVER BED. DUAL PALM BUTTON TRIP. YES. BED AREA SIZE. 32" X 21". CAPACITY. 60 TONS. SLIDE RAM ... moreAREA SIZE.
$
400.00
Buy It Now
Condition: Used
Location: Oxnard, United States
$
5000.00
Buy It Now
Condition: Used
Location: Danville, United States
Large Lot Of unipunch tooling Punches And Jaws Make And Female Punch Sets..
$
2499.99
Buy It Now
Condition: Used
Location: Middlebury, United States
To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly. Prefer to pick ... moreit up yourself?. We choose the carrier. Unless otherwise specifically agreed to in writing by.
$
199.00
Buy It Now
$41.30 Shipping
Condition: Used
Location: Milroy, United States
Unipunch USA 12 AJ 1 1/2. with 1/2" round punch and die - ready to work.
$
1530.00
Buy It Now
Condition: Used
Location: Wallkill, United States
MFR Part # : THOR 2018. Hand operated Punch. 2” punching capacity through 12 gauge mild steel. Includes stand and working table. Only what is shown is ... morewhat is included.
$
157.99
Buy It Now
Free Shipping
Condition: Used
Location: Wooster, United States
Sale is for One (1) Used FC-111-C Arbor Press Rack And Pinion Crimping Lever Press. Including, but not limited to, using alternative products. We get ... moreour inventory from local manufacturers and liquidators.
$
157.99
Buy It Now
Free Shipping
Condition: Used
Location: Wooster, United States
Sale is for One (1) Used 401 Arbor Press Rack And Pinion Crimping Lever Press. Including, but not limited to, using alternative products. We get our inventory ... morefrom local manufacturers and liquidators.
$
1200.00
Buy It Now
$82.93 Shipping
Condition: Used
Location: Farmingdale, United States
$
4500.00
Buy It Now
$200.00 Shipping
Condition: Used
Location: Canada
This unit is working but needs installation, not a buy and use setup. - sale is for 1 unit, but 2 identical units are available. - being a used item there ... moreis no factory warranty, sold as-is.
$
59500.00
Buy It Now
Condition: Used
Location: Jackson, United States
CAPACITY600 TON @ 1/4″ ABOVE BOTTOM. BED AREA96″ RL X 48″ FB (32″ FLOOR TO BED). RECIRCULATING LUBRICATION SYSTEM (PRESS DISASSEMBLED IN STORAGE). RAM ... moreAREA(W/8 PT. GIBBING)96″ RL X 48″ FB T-SLOTTED. BOLSTER SIZE7-3/4″ X 96″ RL X 48″ FB T-SLOTTED.
1 2 3 4 5 6 7 8 9 10 11 12
 In 

Former Listings  
 
DIACRO HOUDAILLE VT-19/S TURRET PUNCH PRESS
DI-ACRO HOUDAILLE Model VT-19/S POWER TURRET PUNCH PRESS S/N: 0660777230 UNTESTED AND SOLD AS IS
BENCHMASTER #1 OBI PUNCH PRESS STAMPING FORMING 110V
BENCHMASTER#1 OBI PUNCH PRESS STAMPING FORMING 110V, SMALL BENCHMASTER OBI PRESS 2 AVAILABLE BOTH NEED TLC. SWITCH ETC. N/C TO STRAP SKID FOR FREIGHT SHIPPING. SOLD AS IS* QUESTIONS FREIGHT QUOTES CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Freight- Check item description or contact seller for details. Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
Press Brake Punch Tooling For 1/4'' plate
Old Punch for 1/4'plate bending. 1 1/2'wide x 4' tall x 5'8 5/8'lg with a 1/4' radius. This punch hasnt got a low spot in it.But it's got lite rust pits in the center. Item weighs 114 lbs& ships from 37876 Sevierville TN. Buyer pays all shipping costs.
Press Brake Punch Tooling 1 1/2''x 3 3/4''x 2'-2 1/2''lg.
1 1/2' wide x 3 3/4' deep x 2' 2 1/2'lg Punch. Item weighs 40lbs& can ship UPS from 37876 Sevierville TN. Buyer pays all shipping costs.
Press Brake Punch Tooling, Acute 2 1/4''x 3 3/8''x 2'-01/8''lg. For 3/8'' plate
2'01/8'lg Acute Punch for 3/8' plate Item weighs 41 1/2 lbs& can ship UPS from 37876 Sevierville TN. Buyer pays all shipping costs.
Press Brake Punch.Tooling 2''x 5 1/4'' Deep x22 5/8''lg.
Old pc of 2' x 5 1/4' deep x 22 5/8'lg Punch. Item weighs 60lbs& can ship UPS from 37876 Sevierville TN. Buyer pays all shipping costs.
RAPID AIR B-3 AIR FEED PUNCH PRESS FEEDER STAMPING
RAPID AIR B-3 AIR FEED PUNCH PRESS FEEDER STAMPING, RAPID-AIR B-3 FEEDER SLIGHT AIR LEAK. WORKS GOOD. QUESTIONS CALL MATT 845-691-4140. Payment I accept the following forms of payment: PayPal Shipping& Handling $15.00 USPS Priority Mail® Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
PRESS BRAKE DIES TOOLING - 90° PUNCH -146" LONG - REFURBISHED
REFURBISHED PRESS BRAKE DIES TOOLING- 06" NOSE RADIUS- 146" LONG- FORMING AREA REMACHINED TO A NEW FINISH WHY BUY NEW WHEN YOU CAN BUY THE SAME QUALITY AT A FRACTION OF THE COST COMPARE TO NEW: $690*ALL DIMENSIONS SHOWN ARE SCALED AND THEREFORE APPROXIMATE USED TOOLING SHOWS SIGNS OF RUST BUT ALL FORMING AREAS REFURBISHED AND REMACHINED TO NEW FINISH Save-On Press Brake Dies is committed to providing press brake tooling at an extraordinary value to our customers. If your tooling needs exceed those that are offered here on ebay. Or you would like to consider reconditioning of your current tooling at a low cost, please contact us at saveonpressbrakedies@yahoo.com BE SURE TO CHECK OUR OTHER ITEMS UP FOR AUCTION FOR GREAT DEALS ON PRESS BRAKE TOOLING
USED PRESS BRAKE DIES TOOLING - 90° PUNCH .09 RADIUS 87" long
USED PRESS BRAKE DIES TOOLING- 90° PUNCH.09 RADIUS 87" LONG COMPARE TO BUYING NEW: $510*ALL DIMENSIONS SHOWN ARE SCALED AND THEREFORE APPROXIMATE USED TOOLING SHOWS SIGNS OF RUST BUT ALL FORMING AREAS ARE FREE OF DAMAGE. CRACKS, OR DEFECTS.JUST TYPICAL WEAR FROM USE Save-On Press Brake Dies is committed to providing press brake tooling at an extraordinary value to our customers. If your tooling needs exceed those that are offered here on ebay. Or you would like to consider reconditioning of your current tooling at a low cost, please contact us at saveonpressbrakedies@yahoo.com BE SURE TO CHECK OUR OTHER ITEMS UP FOR AUCTION FOR GREAT DEALS ON PRESS BRAKE TOOLING 36`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*70%60%3E36%60-13ee172451a-0xfc-
114 Style Mate Punch & Die for CNC Turret Press or Punch Press & Press Tooling
Mate Style 114 Heavy Duty Punch and Die Sets for CNC punch presses such as Wiedemann. Berhens, Muratec All tools are used but have plenty of useful life. Many are specialty tools. Tools include: 12-Hole Cluster Punch.482 x 1.500 Rectangle Punch& Die.012 Clearance.400 x.325 Double D Punch& Die.012 Clearance.500 x 3.000 w/125 Raidus Punch& Die.012 Clearance(2 Dies) 630 x 2.710 w/187 Radius Punch& DIe.012 Clearance, 750 x 2.081 w/125 Radius Punch& DIe.012 Clearance, 625 x 3.162 Rectangle Punch& DIe.012 Clearance, 830 x 3.260 Rectangle Punch& DIe.012 Clearance, 760 x.640 Double D Punch& DIe.012 Clearance(Two Sets) 250 x.406 Obround Punch& DIe.012 Clearance, 250 x.206 Obround Punch& DIe.012 Clearance, 660 x.785 Rectangle Punch& DIe.012 Clearance, 375 x 1.875 Rectangle Punch& DIe.012 Clearance, 690 ... morex.770 Rectangle Punch& DIe.012 Clearance, 870 x.893 Rectangle Punch& DIe.012 Clearance, 285 Diameter 82° Countersink Tool, 296 Diameter 82° Countersink Tool, Blank Bottom Die for Countersink Tools, 875 Knock Out Tool Punch& DIe.012 Clearance, 750 Knock Out Tool DIe.012 Clearance, 080 Wide ~.750 x ~.218 Lance& Form Punch& DIe.012 Clearance, 080 Wide ~1.250 x ~.180 Lance& Form Punch& DIe.012 Clearance, 180 Wide ~1.500 x ~.180 Lance& Form Punch& DIe.012 Clearance, 100 Wide ~1.500 x ~.160 Lance& Form Punch& DIe.012 Clearance, 218 Dimple Tool, Lance Stripper Die, Specialty Hasp Shape Punch& Die.012 Clearance, Wiedemann"D" Size Spring Stripper Plate DIe, GROUND" Engraving Stamping Tool, Press Brake Specialty Tooling for Stamping Number in metal. BLOCK" TEST" 1 2 3 4 5 6" 19 20 21 22 23 24 25 X" 13 14 15 16 17 18" 7 8 9 10 11 12" 1 2 3" 1 2 3 4 5 6" ~7" Flat Die(Anvil for stamping) ~7" Tool Holder, ~4" Tool Holder, 2" Press Brake Die Holder, Shipping is estimated and should be overestimated. Shipping difference will be refunded to actual cost. Buyer can
LOT OF LOUVER PUNCHES AND DIES VARIOUS SIZES SHEET METAL PUNCH PRESS BRAKE
LOT OF ASSORTED LOUVER DIES IN VARIOUS SIZES AND VARIOUS DEPTHS. PLEASE REFER TO THE PICTURES. EVERYTHING INCLUDED IN THE SALE IS PICTURED NOTHING MORE. NOTHING LESS. PLEASE FEEL FREE TO ASK ME ANY QUESTIONS YOU MAY HAVE REGARDING THIS ASSORTMENT OF PUNCHES AND DIES. 732-642-8271
Unipunch OBI Press Punch Die Holder - One
YOU ARE BIDDING FOR ONE NEW UNIPUNCH PUNCH AND DIE HOLDER. I KNOW THERE MAY BE MORE THAN ONE IN THE PHOTO. YOU ARE BIDDING FOR ONE. FIRST BUYER GETS THE SHRINKWRAPPED SET WITH THE EXTRA PUNCH AND DIE SETS, SO IF THE LISTING SAYS QUANTITY REMAINING OF 2, YOU GET THE WRAPPED SET. IF IT SAYS QUANTITY REMAINING 1, YOU GET THE OTHER(ALSO UNUSED) SET8-3/8-8-3/16 SHUT HEIGHT CAP 1/4" MILD STEEL, 3-1/2" DIE HT, 562 PUNCH, 1-7/8" WIDE FRAME. BUYER PAYS USPS PARCEL POST SHIPPING ON 24LBS FROM 30527 2009-14 PLEASE READ BEFORE BIDDING: EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the ... morecorrect surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws
Spartanic Rouselle Punch Press Model 38-VM
Spartanic Rouselle Punch Press Model: 38-VM S/N: 58 UNTESTED AS IS Powered by The free listing tool. List your items fast and easy and manage your active items.
GENERAL ELEC MARK CENTURY 1050 CONTROL STATION FROM A STRIP-IT PUNCH PRESS 1123
GENERAL ELEC. MARK CENTURY 1050 CONTROL STATION FROM A STRIP-IT PUNCH PRESS SHELF WS#3-E Powered by The free listing tool. List your items fast and easy and manage your active items.
1974 DIACRO THE ART OF PUNCHING WITH DI-ACRO MANUAL SYSTEMS PUNCH PRESS CATALOG
5 DAY AUCTION! 19 74 DI ACR O PUNCH PRESSES CATALOG'THE ART OF PUNCHING WITH DI-ACRO MANUAL SYSTEMS' STYLUS. POWER TURRET, HAND TURRET, SINGLE STATION, ACCESSORIES& MORE 2 0 PGS YOU ARE BIDDING ON ORIGINAL LITERATURE UNLESS OTHERWISE STATED S&H IS $6.50 USPS PRIORITY MAIL. EACH ITEM IS SAFELY PACKED WITH CARDBOARD INSERT ALL INVOICES MUST BE PAID WITHIN 3 BUSINESS DAYS IF YOU HAVE ANY QUESTIONS REGARDING PAYMENT PLEASE EMAIL ME PLEASE DO NOT ASK TO BUY A PHOTOCOPY DURING OR AFTER AUCTION. COPIES ARE NOT AVAILABLE I DO SEND 2ND CHANCE OFFERS ON OCCASION IF I HAVE DUPLICATES. EMAIL ME TO VERIFY I SENT IT IF YOU'RE NOT SURE IT CAME FROM ME. IF YOU DON'T WANT TO RECEIVE 2ND CHANCE OFFERS YOU MIGHT WANT TO USE THE EBAY FEATURE THAT WILL ALLOW YOU TO'OPT-OUT' OF RECEIVING 2ND CHANCES FROM SELLERS. BUYER CAN COMBINE ... moreSHIPPING ON MULTIPLE PURCHASES. IF YOU BUY 1 COST IS $6.50. IF YOU BUY MULTIPLE ITEMS COST WILL STILL BE ONLY $6.50 TOTAL. SHIPPING COSTS ONLY INCREASE ON MULTIPLE PURCHASES IF YOUR ORDER CAN'T FIT IN A PRIORITY MAILER AND HAS TO BE PACKED OTHERWISE. SHIPPING& HANDLING CHARGES ARE NOT NEGOTIABLE. EVERYBODY PAYS THE SAME. 1t.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13eef0dbec6-0xed-
VINTAGE 1948 ROTEX Q.C. TURRET PUNCH PRESS CATALOG W/18" MODEL PARTS LIST #18
5 DAY AUCTION! 194 8 ROTEX Q.C. TUR RET PUNCH PRESS CA TALOG& PARTS LIST CATALOG COVERS MODELS#18 A&B. 15 A&B. 10& PUNCH PRESS STANDS ATTACH ED TO CATALOG IS PARTS LIST FOR RO TEX#18 18" TURRET PUNCH WITH NIBBLING SHE AR BOTH 4 PAGES EACH YOU ARE BIDDING ON ORIGINAL LITERATURE UNLESS OTHERWISE STATED S&H IS $6.50 USPS PRIORITY MAIL. EACH ITEM IS SAFELY PACKED WITH CARDBOARD INSERT ALL INVOICES MUST BE PAID WITHIN 3 BUSINESS DAYS IF YOU HAVE ANY QUESTIONS REGARDING PAYMENT PLEASE EMAIL ME PLEASE DO NOT ASK TO BUY A PHOTOCOPY DURING OR AFTER AUCTION. COPIES ARE NOT AVAILABLE I DO SEND 2ND CHANCE OFFERS ON OCCASION IF I HAVE DUPLICATES. EMAIL ME TO VERIFY I SENT IT IF YOU'RE NOT SURE IT CAME FROM ME. IF YOU DON'T WANT TO RECEIVE 2ND CHANCE OFFERS YOU MIGHT WANT TO USE THE EBAY FEATURE THAT WILL ALLOW YOU TO'OPT-OUT' ... moreOF RECEIVING 2ND CHANCES FROM SELLERS. BUYER CAN COMBINE SHIPPING ON MULTIPLE PURCHASES. IF YOU BUY 1 COST IS $6.50. IF YOU BUY MULTIPLE ITEMS COST WILL STILL BE ONLY $6.50 TOTAL. SHIPPING COSTS ONLY INCREASE ON MULTIPLE PURCHASES IF YOUR ORDER CAN'T FIT IN A PRIORITY MAILER AND HAS TO BE PACKED OTHERWISE. SHIPPING& HANDLING CHARGES ARE NOT NEGOTIABLE. EVERYBODY PAYS THE SAME.
Antique AJAX Eyelet Tool Punch Hand Press Cast Iron Vintage Sewing Cobbler's EUC
ANTIQUE'AJAX EYELET' CAST IRON TOOL ~ EYELET PUNCH HAND PRESS From a c.1900 Hardware Store and Blacksmith shop in Hilbert. Wisconsin. Great used, working condition. Cast iron eyelet press works by filling the round receptacle with brass/metal eyelets, they then stream down into a single track, then placing fabric under punch, and using the handle to firmly press down which punches the eyelet in and fastens it. Original tag on side has advertising"Watch For This Trademark AJAX Eyelets AJAX Fasteners" Warning Use Only Ajax" A few eyelets still in hopper! Offered exactly as shown. Measures about 11" tall. An unusual collectible tool. Please review photos to assess condition. Please mouse over pictures to enlarge and examine details. Please send questions. Thank you for looking. n6gonr.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3En6gonr-13eefdd84aa-0xf7-
Used Mechanical Punch Stamping Press 88 Ton 41 x 25 Gap frame press 75, 88 85 90
Jack Stefano for more information 1.800.382.8322 or email; jack(at) fmsweb. com Check our 100% Feed Back! Specification Description Tonnage, 88 Tons, Stroke length, 3.94" 100mm) Stroke per Minute(variable) 50-100 SPM, Die height(SDAU) 13.78" Slide adjustment, 3.15" Slide area, 21.5" x 18.11, Knock-Out diameter, 2" Bolster, 41.24" x 25.25" Bolster thickness, 3.94" Overall height, 116" Approximate weight, 13.200 lbs, Main drive, 10 HP, Slide adjustment motor, 1/2 HP, Approximate weight, 13.500 lbs, Equipped With: Combination Air Clutch And Air Brake. Wintriss Smartpac Press Automation Including Wintriss Load Analyzer. Dipro Sensor Interface. Light Curtains. Motorized Slide Adjustment. Dual Palm Button Controls. 25.25" X 41.25" T-Slotted Bolster With 7" X 14" Hole Thru. Flywheel ... moreForward/Reverse. Preset Counter. Product Counter. Rheostat Stroke Speed Control With Stroke Meter. You can see this before you buy it. Leasing Available. We arrange shipping. Thanks for looking! Adams Mach Nov 20 12 8four7 673 o55six
Marsh Model H 1/2" Stencil Cutting Machine Maker Cutter Press Punch HEAVY DUTY!
Marsh model H 1/2" Stencil Machine Works Well ~ turns smoothly ~ cuts smoothly Used. Needs a better cleaning. Has some cosmetic wear. Please feel free to ask questions. Will be packaged well.
BLISS C-SERIES (22, 60, ETC) PUNCH PRESS OWNERS MANUAL
BLISS C-SERIES(22. 60, ETC) PUNCH PRESS OWNERS MANUAL THIS IS A COMPLETE MANUAL COVERING ALL OPERATING AND MAINTENANCE INSTRUCTIONS. INCLUDES NUMEROUS BLUEPRINTS OF PARTS AND SUB-ASSEMBLIES. SHIP ONLY TO AREAS SERVED BY USPO PRIORITY MAIL PAYPAL ONLY PLEASE NO RETURNS ON MANUALS
USED PRESS BRAKE DIES ~ GOOSE NECK ~ PUNCH SET OF 3 8" LONG
USED TOP GOOSE NECK PUNCH SET OF 3 APPROX. 1)5" 2) 1-1/2" SHIPPING INFORMATION: Shipping Weight:25 LBS. Shipping from San Bernardino. Ca 92407 Handling Fee: $2.00 per package SIGNATURE AT DELIVERY IS REQUIRED FOR ALL PACKAGES! SHIPPING ADDRESS NEEDS TO BE PAYPAL VERIFIED We only ship within the United States. We ONLY use UPS& US POSTAL for all our shipping needs. Please call us to get a shipping + packaging charges before bidding/finalizing your transaction. BID w/ CONFIDENCE& GOOD LUCK! Questions:Use"Ask Seller a Question" Link PAYMENT INSTRUCTIONS: All payments must be received within 5 business days of auction end. If there has been no contact/payment from the buyer within 7 days after the auction ends. NPB will be filed and the item will be re-listed. Buyers are responsible for paying Sales Tax if in California ... moreCUSTOMER SERVICE: We do our best to present accurate information about every item we sell. If you have any questions. Use the"Ask Seller a Question" Link before placing your bid. RETURNS: We offer a 14 day return policy for this item from the time of delivery. After 14 days no refunds and returns will be accepted. Buyers will pay for return shipping to our location.
50 TON JOHNSON OBI PUNCH PRESS UNDER POWER FOR OPERATION AND INSPECTION
JOHNSON OBI 50 TON TIMKEN BEARING EQUIPPED CRANK BEARING DIAM 3 7/8 MAIN BEARING DIAM 3 1/2 BED TO SLIDE ADJUSTMENT IS 12 INCH 5 INCH STROKE BED IS 27 1/2 X 15 1/2 I HAVE BEEN USING THIS IN MY GARAGE SHOP FOR MAKING SHORT RUN PARTS FOR A FEW YEARS HAS ONE SHOT AUTO LUBE SYSTEM COMES WITH DANLY SHOES BALL BEARING SLIDES I ALSO HAVE EXTRA UPPER AND LOWER BOLSTER PLATES YOU ARE RESPONSIBLE FOR OSHA REQUIREMENTS I AM IN NO WAY RESONSIBLE FOR OSHA SANDARDS OR SAFETY THE PRESS IS UNDER POWER AND YOU CAN INSPECT AND OPERATE CALL 248 875 2089 WILL SHIP WORLD WIDE
punch press adaptor top 2 to 1
2 in to 1 in $2.70 WAS ADDED FOR SIGNATURE CONFIRMATIOM 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13eff6b7a1c-0x102-
MARSH MODEL H 1/2" ~ 13mm Hand Operated ~ Press Punch ~Stencil Cutting Machine
THIS LISTING IS FOR A MARSH MODEL H HAND CRANKED STENCILL MACHINE. IT PRODUCES 1/2" STENCILS AND IS IN GREAT CONDITION. IT IS MADE BY THE MARSH STENCIL MACHINE COMPANY IN BETTEVILLE. ILLINOIS. THESE MACHINES RUN ABOUT $1500 NEW. WE WERE GIVEN THIS ONE AND THAT IS WHY WE ARE SELLING SO CHEAP. WE DID TRY IT OUT AND IT DOES WORK. IF ANY QUESTIONS OR CONCERNS EMAIL ME PLEASE. CHECK OUT OUR OTHER ITEMS THERE IS A HUGE VARIETY. THANKS
5 Ton-BENCHMASTER-MACHINE-PUNCH-PRESS-MONEC0-Table Top
NO RESERVE! Stamping. Blanking, forming, notching, assembly, piercing, swaging. You name the application, and a Benchmaster press is probably running the job right now. There is no other U.S. manufacturer of low-tonnage mechanical presses who can provide you with the quality, selection and value that Benchmaster can A press. Like any other piece of equipment, is only as good as the components used to build it. Skimping on costs by using inferior quality(i.e. CHEAPER) components rarely, if ever, pays off- as you well know! How often have you ever regretted investing in quality? I'll bet the answer is NEVER! And how many times have you kicked yourself for buying something that you knew was probably too good to be true, and then ended up being precisely the case? Yeah, me too. I like to think I've learned my lesson, although it doesn't ... moreALWAYS stick. A Benchmaster press is quite likely NOT to be the"cheapest" machine you can buy. What I can promise you is that we've built in quality(VALUE) where it counts. Rigid Cast(2- 15 ton) or Fabricated Steel(22- 347 ton) frames- your dies will run better, Link Systems& Protech Systems air clutch controls- proven to be safe& reliable, Bijur lubrication systems- cut maintenance and repair costs, Vibro-Dynamics isolator/leveling mounts- for fast. Easy installations, lower noise, and longer tooling life, Link. Protech, and Lumiflex light curtain guarding- to maximize productivity and operator safety, press has been modified from original Equipment! Sold As Is) Benchmaster Ton Power Punch Press Make: Benchmaster 5 Ton Wide Gap Press Shank: 1" Power: 115V/ 3/4 HP/1725RPM/11.6 AMP/60HZ/1PH
L&J STAMPING PRESS Punch Punching L and J L & J 27 TON
This is a L&J Stamping Press. It is in good working condition. The unit is located in San Carlos. California-and is available for inspection. We can assist with loading. But buyer is responsible for transport. If you have questions. Please email or call 510-364-5019(Paul)
AMADA APELIO 357 W/ AS848 LOADER COMBO TURRET PUNCH PRESS LASER
This is an Amada Apelio 357 Combo Turret Punch Press Laser. It is in good working condition. The unit is located in San Carlos. California-and is available for inspection. We can assist with loading. But buyer is responsible for transport. If you have questions. Please email or call 510-364-5019(Paul)
AMADA PEGA 345 CNC TURRET PUNCH PRESS
This is an Amada PEGA 345 CNC Turret Punch. It is in good working condition. The unit is located in San Carlos. California-and is available for inspection. We can assist with loading. But buyer is responsible for transport. If you have questions. Please email or call 510-364-5019(Paul)
30 Ton 30" Thrt Strippit SUPER 30/30 SINGLE STA. PUNCH PRESS, W/RETROFITTED CONT
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 30 Ton 30" Thrt Strippit SUPER 30/30 SINGLE STA. PUNCH PRESS. W/RETROFITTED CONT Ref# 144021 iammdna XFABSS 30 TON STRIPPIT SEMI-AUTOMATIC FABRICATOR MODEL SUPER 30/30 S/N 173263079 NEW 1979 COMPLETE ... moreW/RETROFITTED TOUCH SCREEEN CONTROL TONNAGE. 30 TON THROAT DEPTH. 30" MAXIMUM HOLE DIAMETER. 3.5" DIA. IN 12 GA. MAXIMUM MATERIAL THICKNESS. 1" DIA. IN.250 TABLE SIZE. 72" W X 48" D SHEET SIZE. 30" X 30" STROKE LENGTH. 5/8" HITS PER MINUTE. 165 MOTOR. 1 HP SHIPPING WEIGHT. 6.500 LBS EQUIPPED WITH: RETROFITTED TOUCH SCREEN OR KEYBOARD POSITIONING CONTROL- NUMEROUS PUNCHES AND DIES- 1-1/4" 3-1/2" QUICK CHANGE TOOL HOLDERS- REMOTE FOOT SWITCH Machine Location: HARRISON. NJ Click Here For More Strippit Machines Click Here For More Fabricating Machine- SINGLE STATION PUNCHES. FABRICATORS(s) Questions about this Machine? Call Rick at(800) 873-6224 ext 7560 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one of the world's largest machinery dealers. In business since 1971. All used items bought from our
TINSMITH RADIUS DIE SHEET METAL PUNCH PRESS BRAKE PARKER DIE
2' SQUARE BY 10' LONG PARKER DIE. DIE'S ARE-10-14-18-20 NICE SHAPE
USED AMADA TOOLING PUNCH PRESS DIE (4.937" DIAMETER)
LISTING IS FOR A USED AMADA PUNCH PRESS DIE TOOLING AMADA DIAMETER- 4.937" THICKNESS- 1.109" CONDITION- LIGHTLY USED Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING ... moreDISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. IF ITEMS ARE UNPAID WITHIN THE 7 BUSINESS DAY TIME PERIOD, ITEMS WILL BE RE-LISTED
PRESS BRAKE "TIPPED ANGLE" GOOSENECK PUNCH and DIE SET
PRESS BRAKE BOX FORMING GOOSENECK PUNCH and DIE SET- USED PRESS BRAKE BOX FORMING"TIPPED ANGLE" GOOSENECK PUNCH and DIE SET INVENTORY# 4722 CAPACITY: 18 GAUGE AND LIGHTER DESCRIPTION: THESE SPECIAL GOOSENECK PUNCHES ARE USED TO FORM BOXES& CHANNELS WITH LONG RETURN LEGS. THEY ARE RECOMMENDED FOR 18 GAUGE AND LIGHTER DUE TO SIDE THRUST CAUSED BY THE TIP FORMING ANGLE. PUNCH SPECIFICATIONS: TIPPED ANGLE GOOSENECK PUNCH RADIUS: 3/32” CLEAN UP BAR: 2”(2) PIECES: PUNCH#1 LENGTH: 11 1/4" PUNCH#2 LENGTH: 8 1/2" DEPTH: 7" OVERALL LENGTH: 19 3/4 ” DIE SPECIFICATIONS: TIPPED ANGLE DIE CLEAN UP BAR: 1 7/8” OPENING: 1 1/8" DEPTH: 2" OVERALL LENGTH: 22 1/4” NEW REPLACEMENT COST: PUNCH: $ 845.00 + DIE: $ 995.00 = $ 1.840.00 SEE DIAGRAM BELOW: GOOD CONDITION(2) MORE DIE ARE AVAILABLE FOR THIS PUNCH: 1) 40” AND(1) 72” ... moreMANY OTHER PUNCH AND DIE SETS ARE AVAILABLE IN OUR WAREHOUSE- PLEASE CONTACT US WITH YOUR SPECIFIC NEEDS SHOP MORE PRESS BRAKE PUNCHES HERE FOB WAREHOUSE CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 yea
Paper Drill Press Hole Punch tags, passes, invitations, prepress, printing equip
Paper Drill Press Hole Punch tags. Passes, invitations, prepress, printing equip Paper Drill Press used for punching a hole in large numbers of paper. Hanging hole for calendars and such or a hole for tags. Passes, etc. Works great. Local Pickup SW Florida Thank you for checking our auction. Please check our other items for similar items. 24 Hour Shipping ONLY IF ITEM is PAID within 48 Hours of listing end. Please see the shipping charges for each item. Please check the pictures carefully as we consider the pictures as part of the description. Please contact us if you have a problem with your order. gsrx_vers_457(GS 6.3.2(457)
PAIR (2) STRIPPIT 8BN1-3/4 C-FRAME PUNCH PRESS TOOLING
PAIR(2) STRIPPIT 8BN1-3/4 C-FRAME PUNCH PRESS TOOLING Click Images to Enlarge 000_0842 PAIR(2) STRIPPIT 8BN1-3/4 C-FRAME PUNCH PRESS TOOLING COMES AS SEEN IN PHOTOS PLEASE VIEW PHOTOS AND ASK ALL QUESTIONS BEFOR BUYING. MADE BY STRIPPIT NO. 8BN1-3/4 THROAT 8" OVERALL SIZE(1) 2-7/8"x11-1/2"x6" TALL. WEIGHT: 32 LBS. WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: email for additional inquiries To estimate your shipping costs using ebay's calculator click We encourage our prospective customers to come and inspect this unit at our facility prior to bid. Please schedule your appointment at(626) 330-4647. Come browse through our huge inventory of various machines and industrial ... moreequipment which we have yet to list on eBay. Seller is to receive payment within 5 days of end of auction. High bidder must pick up or schedule loading within 7 days of auction end. Storage fees may apply after 2 weeks. Our schedule is Monday thru Friday 8:00 AM to 3:30 PM PST. CLOSED FROM 11AM TO 12PM M-F NOTE: Item will be re-listed immediately if buyer cannot adhere to the conditions and time frame previously mentioned. Manufacturer: Dayton SHIPPING HANDLING FEES. $3.50 For items between 1-7 lbs needing standard packing. $4.75 For items between 8-20 lbs needing standard packing. $7.00 For items between 21-35 lbs needing standard packing. $9.00 For items between 36-80 lbs needing standard packing. Handling fees are subject to change if item(s) are irregular or oversized. Items that require a standard 4'x4' pallet will have a $25.00 fee. This includes securing item with steel banding and shrink wrapping. Please call for pricing on items that require custom skid or crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Please contact us at 626-330-4647 if you would like to combine ite
5 Ton Rousselle Bench Model Punch Press No. OA (17513)
For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. 5 Ton. Rousselle, No. OA, 1-1/4" Str, 4-3/4" SH, 7" x 10" Bed, 1 Phase Our stock number: 17513. MODEL: OA SERIAL NUMBER: 1856 FACTORY SPECIFICATIONS Capacity: 5 Tons Strokes Per Minute: 250 Standard Stroke: 1-1/4" Bed Area: 7" x 10-1/2" Die Space. Bed to Slide, SDAU) 4-3/4" Depth of Throat. C/L Ram to Frame: 3-1/2" Width of Opening Through Back: 4-3/4" EQUIPPED WITH 1/3 HP Motor. 1745 RPM 115/230/60/1 Mechanical Clutch Air Cylinder Trip Bolster Plate(3/4" Thick) Push Button Starter Palm Button Approximate Weight: 335 lbs. Floor Space: 24" Left to Right x 20" Front to Back NOTE: This is an O.B.I. Press without the lower base. Press mounted ... moreon table in fixed position. F.O.B. Cincinnati. Ohio 45223. PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street Cincinnati. Ohio 45223 www.cwwood.com info@cwwood.com 800-745-6008 Payment Information We accept Visa. Master Card, Discover, Paypal, Bank Wire Transfers and Checks. Although we do accept Paypal. We prefer other forms of payment. Shipping Information Domestic: We ship freight collect with Dayton Freight. Matson America, or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Dayton Freight: 800-860-3210 Matson America: 850-562-8592 International: All international shipping is to be set up by the buyer. Recommended Custom Built Crates: 513-248-4422 Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing and skidding fees. Skidding fees range from a minimum of $50.00 +. skids shown in pictures are not included with the item Any item purchased with a pick up or delivery date m
NIAGARA Mo M-45 Flywheel Type O.B.I.Punch Press
Item Name: NIAGARA Mo M-45 Flywheel Type O.B.I.Punch Press Item# 8255 Price/Each: $6.995.00 Year: 1971 Brand Name: NIAGARA Model: M-45 Serial# Asset Tag: 6732 Item Location City: Philadelphia State: Pennsylvania Zip Code: 19155 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description NIAGARA Model M-45 Flywheel Type O.B.I. Power Punch Press New 1971 Capacity 45 Ton, Air Clutch and Brake with Selector Controls Stroke 3" Shut Height Over Bed(SDAU) 12-1/4" Slide Adjustment 2-5/8" Bed Area 28" L-R x 18" F-B Flanged Slide Area 12" L-R x 14" F-B Depth of Throat 9" Opening Through Back 14" Speed ... more60 to 180 SPM. Arranged for Knockout Crankshaft Extension Left Side, EQUIPPED WITH: Bolster Plate 2-1/4" Automatic Lubrication System, Electrical Controls, Dual Palm Button Operation, Flywheel Guard, Weight. Approx. 7,000 lbs Dimensions. Approx. 50" L-R x 62" F-B x 110" H, RIGGING ANG HAULING NOT INCLUDED- Contact Us About This Machine Should you have questions. Please contact Dave Drozdenko at 860-484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. The above fees are non-negotiable and cover the fees paid by Global to banks and services. Thank you for your understanding! Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt
Precision Flexo punch Press 15 ton c frame gap Air Clutch finger safety switches
please scroll down and view all the photos. The title is not a complete description so please read the ad description. You Are Bidding On A Pre-Owned Precision FlexoPress C frame gap punch press Model C-15 15 ton 12 x 20 Bed Air Clutch marked 8068-2 finger safety switches 1HP 208-220/440v 3 Phase 2750# skidded Ideal for any shop. Item is in working order. Description, Model C-15. CAPACITY 15 ton copy of manual specifications Capacity: 15 Tons Stroke: 1-1/2" max 2" Shut Height: 7" Adjustment: 1-1/4" Bed Area: 14"w x 10"D Opening in Bed-RL x FB: 8 x 7" Depth of Throat: 5" Opening in Back: 9-3/8" Shank dia. 1 9/16" Strokes per min. 150-600 There is no charge to skid or load. Local pickups save all shipping and we can load with forklift into your truck or trailer. Questions email or call BOB 773-392-5055 ... moreTerms of Sale Bidders please read all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping· Flat rate shipping is to lower 48 states only. I will combine shipping costs on multiple purchases. Winner must make contact within 3 days of auction end. Payment is due within 7 days of auction end. This means Received not sent. You are welcome and encouraged to view items in person. I describe items to best of my ability. I try to provide good pictures for your consideration. I am not an expert on all of my items so please ask questions before bidding. Most items have a warranty check ad for policy in none is listed then the following applies. All items are sold"AS- IS. Where- IS" and with no refunds or returns. Items are described to the best of our knowledge, however, We at Best Bay Machinery Sales and/or the Seller make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. I always return feedback so leave some good comments so I can do the same for
5" X 5" PIERCE ALL NOTCHER PRESS BRAKE PUNCH PRESS
5" X 5" PIERCE ALL NOTCHER PRESS BRAKE PUNCH PRESS, 5" X 5" PIERCE ALL NOTCHING DIE L.H. GOOD CONDITION. BLADES COULD USE SHARPENING. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13f0db08bd7-0xf2-
3-1/4" X 3-1/4" NOTCHER PRESS BRAKE PUNCH PRESS SHEAR 90 DEGREE
3-1/4" X 3-1/4" NOTCHER PRESS BRAKE PUNCH PRESS DIACRO, 3-1/4" X 3-1/4" 90 DEGREE NOTCHER. USE IN PUNCH PRESS. BRAKE, ETC. WE HAVE 2 IDENTICAL NOTCHERS LISTED. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
Niagara A-22 Punch Press 11.5" of Shut Height - 22 ton 4" Stroke
Niagara A-22 Punch Press 22 ton 4" stroke with 11 1/2" of shut height! Bed is 12" x 20" 150 SPM 230v 3 phase. Great for anyone running Unipunches. Buyer must sign a liability waiver before shipping as I am not insured for punch presses. Inspection in my Aberdeen. NJ shop is welcome call 917-974-7381. NY and NJ residents must add sales tax or provide a valid exemption. PLEASE CHECK MY OTHER ITEMS.
Finn-Power CNC Turret Punch Press Model TP 3015-IF2
Finn-Power CNC Turret Punch Press Model TP 3015-IF2 Finn-Power CNC Turret Punch Press Ref.30-38 Model No. TP 3015- IF2 Serial No. New 1990 This machine is available for sale through a joint cooperation with Red Stripe. Inc. and Industrial Surplus. The machine is in-plant. Under power and available for demonstration. It is a well equipped tool that is ready for production. Number of hours since 2000: 7.912 Punch Force: 30-Tons Maximum Material Thickness: 8mm(31" Maximum Punch Diameter: 89mm(3.5" Working Area. No Repostioning: 1500mm x 1500mm(60" x 60" Working Area. One Repositioning: 1500mm x 3000mm(60" x 120" X-Axis Travel: 1570mm(61.8" Y-Axis Travel: 1560mm(61.4" Punch Stroke: Hydraulic Stroke Depth Adjustment: Numerically Controlled Stroke Length Adjustment: Programmable Ram Speed Adjustment: Programmable ... moreType of Tooling: Nova- Thick Number of Tool Stations: 22 Number of Multi-Tool Tool Stations: 3 Capacity of Tools in Multi-Tool Tool Stations: 24. 16& 6 Tools-In-One Maximum X-Axis Positioning Speed: 88m/Min(288 Ft/Min) Maximum Y-Axis Positioning Speed: 75m/Min(246 Ft/Min) Rapid Traverse Speed: 115m/Min(377 Ft/Min) Minimum Programmable Increments: 0.001mm(0.0000394" Maximum Hit Speed. 1.6mm Between Holes: 570/Min Maximum Hit Speed. 25mm Between Holes: 310/Min Maximum Hit Speed. 250mm Between Holes: 130/Min Turret Rotation: 20 RPM Tool Change Time: 1.5- 3 Sec. Work Chute Maximum Piece Size: 200mm x 200mm(7.8" x 7.8" CNC Index Tool Positioning. Programmable: 0.001 Degrees Equipped With: Siemens Sinumerik System 3N CNC Control with 2-Year Old CRT. RS-232 Port and 64k of Memory Auxiliary Table to Handle Sheets of 1500mm x 3000mm(not used when auto loader is in place) Scissors Shear for Cutting Pieces up to 24' x 24" Including(3) Sets of Blades(2) X" Pins for Locating the Grippers and Sheet Stock Finn-Power PCS Automatic Clamp Positioning System Full Set of Turret Tooling Plus(30) Additional Pieces(3) Multi-Tool Tool Stations. 24, 16& 6 in
Oricon-10 OCN-10 Electric Punch Press with Foot Pedal
Oricon-10 OCN-10 Electric Punch Press with Foot Pedal From our inventory. We are selling an Oricon-10 Electric Punch Press with Foot Pedal. Specifications: Model# OCN-10 More Information: We do not know the rating on this press. We think it is at least 1-ton. But we do not know for certain. RE-3-A 0 lbs D&S Machined Products focuses strongly on quality of items that we sell. That’s why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 0 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal ... moreas payment per eBay’s policy. However. You can use a Credit Card through PayPal as a “one time payment”. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasonable amount of time for your package to be shipped an
NIAGARA MODEL A2 22 TON OBI PUNCH PRESS 2 1/2 INCH STROKE 50 - 150 SPM
NIAGARA A2 1/2. 22 TON, 2 1/2" STROKE, 8 3/4" SHUT HEIGHT, 50- 150 SPM VARI SPEED
C-FRAME UNIPUNCH 8 AJ 1-1/4" PUNCH PRESS TOOLING / FABRICATION
C-FRAME UNPUNCH 8 AJ 1-1/4" PUNCH PRESS TOOLING/ FABRICATION Click Images to Enlarge?C-FRAME UNIPUNCH 8 AJ 1-1/4" PUNCH PRESS TOOLING/ FABRICATION COMES AS SEEN IN PHOTOS ALL THE INFORMATION THAT WE HAVE IS STATED BELOW 8AJ 1-1/4" THROAT 8" WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE. andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 13 lbs. Shipping ... moreand Handling: Payment Policy: PayPal: Yes we do accept paypal payments for all items being shipped out. IF you are picking up the item or having a friend pick up the item it must be paid in person at time of pick up. ALL NEW AND OLD BUYERS MUST CALL BEFORE PICKING UP ANY ITEM. 1MachinerySales.com ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and equipment visit our e page. We are located at: 14911 Don Julian Rd, City of Industry. Calif. 91746, Tel: 626) 330-4647, ALL BUYERS MUST CALL BEFORE PICKING UP ANY ITEM, open at 8am to 3:30pm& Closed from 11am-12pm(lunch) e-mail: ITEMS OVER $15.000.00 Prior to placing a bid of $15.000.00 or more buyer requires verification of payment status which could be credit card or any other alternative means. Copyright 2004. 1M
UNIPUNCH 4BX 3/4 PUNCH PRESS TOOLING / 4-3/4" / 4" THROAT / FABRICATION
UNIPUNCH 4BX 3/4 PUNCH PRESS TOOLING/ 4-3/4" 4" THROAT/ FABRICATION ​UNIPUNCH 4BX 3/4 PUNCH PRESS TOOLING/ 4-3/4" 4" THROAT/ FABRICATION COMES AS SEEN IN PHOTOS ALL THE INFORMATION WE HAVE IS STATED BELOW OR CAN BE SEEN IN PHOTOS PLEASE NOTE THAT WE HAVE 1 OR MORE FOR SALE AND EACH HAVE DIFFERENT MARKINGS/ SCRATCHES UNIPUNCH 4BX3/4 4" THROAT WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE. andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. ... moreInternational Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 6 lbs. Shipping and Handling: Payment Policy: PayPal: Yes we do accept paypal payments for all items being shipped out. IF you are picking up the item or having a friend pick up the item it must be paid in person at time of pick up. ALL NEW AND OLD BUYERS MUST CALL BEFORE PICKING UP ANY ITEM. 1MachinerySales.com ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and equipment visit our e page. We are located at: 14911 Don Julian Rd, City of Industry. Calif. 91746, Tel: 626) 330-4647, ALL BUYERS MUST CALL BEFORE PICKING UP ANY ITEM, open at 8am to 3:30pm& Closed from 11am-12pm(lunch) ITEMS OVER $15.000.00 Prior to placing a bid of $15.000.00 or more buyer requires verificat
Benchmaster 4TON Punch Press with Dayton AC Motor
Punch Press with AC Motor Punch Press Make: Benchmaster Serial: 3522234A 1 Type: 4 Ton Motor Make: Dayton AC Motor Model: 4K855P HP: 1/2 RPM: 1725 Phase: 1 Hz: 60 Type: K Payment is required within 48 hours of making purchase. Local pick up is encouraged. Shipping is at buyer's expense.
Iron Crafter Metal worker punch Steel press worker 40 ton
40 to angle iron sheer and punch press. Set for 3 Ph right now and works great. Used it to fabricate some steel building pieces. Has a 1/2" punch and a few other bases but no other punches. It stands up like shown or lies down. Dont use it enough for the space. Can load onto truck trailer. Buyer pays all shipping. Please ask any questions before buying. On Jan-06-13 at 17:24:52 PST. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES:
Unipunch 8 AJ 1-1/4 P Punch Press C-Frame USA
Welcome! Up for sale is a Unipunch 8 AJ 1-1/4 P Punch Press C-Frame. Made in the USA. Used in good condition. Feel free to email any questions! SCT1845a
ALVA F. ALLEN BT-5 PUNCH PRESS
Item Details Item Information Item Name: ALVA F. ALLEN BT-5 PUNCH PRESS Item# 10418 Price/Each: $2.500.00 Year: Brand Name: ALVA F. ALLEN Model: BT-5 Serial# Asset Tag: A4533 Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description ALVA F ALLEN 5 TON PUNCH PRESS MODEL BT-5 CAPACITY: 5 TON STROKE: 1-1/4" OPEN HEIGHT: 6" THROAT CAPACITY: 4" RAM SHANK CAPACITY: 1" BOLSTER PLATE 7-1/2"X10" MOTOR 1/2 HP. 115V 1PH,1725 RPM PNEUMATIC CONTROLS PUNCH PRESS IS TILTABLE FRONT TO BACK MOUNTED ON STEEL STAND- Contact Us About This Machine Should you ... morehave questions. Please contact David Drozdenko at 860-484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we will add $80.00 to the shipping charges. If a rigger is required please notify us prior to quoting shipping. Please email the sales rep for an accurate freight quote. If Buyer c
SCHRADER BELLOWS PNEUMATIC PRESS / SET PUNCH
SCHRADER BELLOWS PNEUMATIC PRESS/ SET PUNCH PNEUMATIC PRESS/ PUNCH 6651A SMALL AIR OPERATED SET PRESS SHRADER BELLOWS CYLINDER 150 PSI DOUBLE ACTING 5" THROW 4" THROAT DEPTH 2" CYLINDER WITH 3/4" PISTON 4X8" BASE PLATE 3" RISER NICE LITTLE SET PRESS TAKEN FROM OPERATIONAL MACHINE TESTED AND WORKS FINE SLIGHT RUST FROM HAVING SAT OUTSIDE HERE IN THE SOUTHWEST BUT NOTHING THAT AFFECTS OPERATION NO CONTROLS Shipping is the responsibility of the purchaser. We will. As a courtesy help make arrangements for the loading and shipping of a given item but the title is the customers as soon as it is paid for and loaded. We are not responsible for any damage done to an item while in transit. Packaging for shipment is done at an additional cost to the purchase price, and will vary according to the complexity, size and difficulty ... moreof making it secure for shipment. Please ask what this will be for a given item. There are no markups on freight costs. Only actual freight charges are asked for. Items less than 150 pounds and 108" in girth will go via Fedex or a similar carrier. Larger items will go via a LTL carrier. It is important that all shipping information be given before shipment: NAME, SHIPPING ADDRESS, AND TELEPHONE NUMBER NEED TO BE INCLUDED IN CORRESPONDENCE to ensure correct shipment. On larger items I need to be informed if it is going to a residence or business address with either dock high unloading or forklift available. Any additional charges that might be incurred and billed to me will be the responsibility of the purchaser to pay. All items are"sold as is where is" without warranty or guarantee as to suitability for purpose or condition unless noted in the add. Items are generally purchased through a number of sources or third parties and prior use or function cannot be vouched for. We generally do not have expertise in a lot of the items we sell and it is strongly recommended that when in doubt an expert in the field be consulted. We make a great effort to describe it
JBI PLATE PUNCH 13" OFFSET PRINTING PRESS
USED BUT GOOD CONDITION JAMES BURN INTERNATIONAL 13" PLATE PUNCH FOR METAL.PAPER ALL PLATES. To make it fast and simple shipping has been set at $16 for the lower US 48. Shipping to Alaska Hawaii Puerto Rico are outside the continental US may be more. Pickup is always acceptable is zip code 46168. If you need further information please ask. Powered by The free listing tool. List your items fast and easy and manage your active items.
DTP 340 A Punch Press
DTP 340 A Renz Semi-Automatic Punch Press with 6mm Pitch die. Little used bought at trade show. Item weight and dimensions include crate.
Ottawa Paper Drill press/ Punch Machine Good condition
This is a good working and clean paper drill. It comes with one bit and one block. Every thing on it works properly including lights vacuum and the machine itself. If you have any questions past what I have specified please ask and I will answer them to the best of my ability. I would prefer not to ship this but if necessary you can arrange for freight pickup after it is purchased.
3 Ton Deep Throat Western Punch Press-RUNS-w/Spares-USED*Will Help in Shipping*
Please take the time to read the entire offer now so there are no misunderstandings later on. Look over all the photos. This is a WESTERN brand punch press, age unknown, estimated to be 3 ton rated. The die that is shown IS INCLUDED& is basically a"V" die with a minor modification. Please take note of the 6 inch deep throat& the opening of 6 inches w/die removed, looks to have a 3" adjustment. Motor runs on house current& is correctly powered for this press. Note brazed repair on front done long ago& NOT by me. A box of spare parts is included. I have used this press with NO issues. Press would be a great to install rivets or grommets in a saddle or tarp repair shop but you will have to modify for your use. Pick up here is best but I will take apart& place on a pallet for truck shipping. Estimated weight ... moreas shown 300 pounds. ASK QUESTIONS. Ebay now requires Pay-Pal payment unless buyer requests another method. Feedback posted about 20 days after shipping date. NO EXPORT* NO EXCEPTIONS* DON'T EVEN ASK. Auction void 10 days after closing w/a Non Paying Bidder Alert sent. If you have PRIVATE or"O" ZERO) please pass on my sales. No questions answered in the last 24 hours of the sale.
ROUSELLE 300 TON MODEL S2- 300- 96- 48 STRAIGHT SIDE DOUBLE CRANK PUNCH PRESS
For Sale! ROUSELLE 300 TON MODEL S2- 300- 96- 48 STRAIGHT SIDE DOUBLE CRANK PUNCH PRESS MODEL. S2-300-96-48 CAPACITY. 300 TON STROKE. 6" ADJUSTMENT. 8" SHUT HEIGHT 17" SPM. 35 T-SLOTTED BOLSTERS. 6" AIR CLUTCH. YES AIR COUNTERBALANCE.YES PALM CONTROL. YES FLOOR STANDING. YE S This item is used and has been tested to be in good working condition. This product can be previewed at our facility CALL for details. CALL. TEXT OR EMAIL WITH QUESTIONS. OCMACHINERY@GMAIL.COM 714 658 5390 We can help with freight and local delivery.
MS Instruments Pneumatic Punch Press Model P/44 Lot of (2) Festo DC-140-100PPV
2 Used MS Instruments Pneumatic Punch Press Model P/44 8203 10 Bar. Festo Type DC-140-100PPV. In good condition will need some minor repairs such as gauges are leaking etc. One is set up for 4" square and the other is 3" Ring Die. Comes with 2 extra 4" cutters. 1 pallet 36" L X 47 W X 27 T@ 466 lbs Freight charges will be determined at end of sale. Check out my! Powered by The free listing tool. List your items fast and easy and manage your active items.
Press Brake Punch 1" Vee Metal Bending Tool P/N #013
Press Break Punch 1" left side. 1" jagged right side. Item is 16 1/2" Long, 1 3/4" Wide, and 3 3/4" Tall. If you have any questions at all. Please contact us. P/N: 013 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13f2190e617-0x102-
Press Brake Punch 1" Vee Metal Bending Tool P/N #020
Press Break Punch 1" Long side of top measures 3/4" Item is 36" Long, 1" Wide, and 4 1/2" Tall. If you have any questions at all. Please contact us. P/N: 020
Press Brake Punch 5/8" Vee Metal Bending Tool P/N #018
Press Break Punch 5/8" Item is 14 1/4" Long. 1 1/4" Wide, and 6" Tall. If you have any questions at all. Please contact us. P/N: 018
Press Brake Punch 3/4 x 1/2" Metal Bending Tool P/N #016
Press Break Punch 3/4" left side. 1/2"right side. Item is 16 3/8" Long, 1 1/8" Wide, and 4" Tall. If you have any questions at all. Please contact us. P/N: 016
17in Adjustable split punch & die reels for Sanden Printing Press
17" adjustable split punch& die reels for a Sanden printing press. fits a 3" shaft. has 4 die and punch holders.
Sanden Printing press 22in split punch & die reels
22" split punch& die reels for a Sanden printing press. inside diam. 3' a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13f29a1cfd5-0xee-
Stevens Printing press 24in punch & die reels
24" punch& die reels for a stevens printing press. inside diam. 3.15'
Stevens Printing press 24in split punch & die reels
24" split punch& die reels for a stevens printing press. inside diam. 3.15'
45 Ton Niagara Model A 3-1/2, O.B.I. Punch press
USED 45 TON NIAGARA O.B.I. PUNCH PRESS Model no. A-3-1/2 Mechanical clutch Flywheel type Stroke: Approx 5" Slide adjustment: 2-5/8" Shut height S.D.A.U. 12-1/4" to top of bed Area of bed: 28" L-R x 18" F-B Bolster thickness: 1-1/2" Area of slide: 12" L-R x 13" F-B Shank hole diameter: 2" Throat depth: 10" Opening through back: 13" Floor to top of bed: 32" S.P.M. approx. 100 Weight approx. 8000# Overall dimensions approx. 53" L-R x 70" F-B x 107" H
UNIPUNCH MODEL 8 BX 3/4" PUNCH PRESS TOOL C FRAME
UNIPUNCH MODEL 8 BX 3/4" PUNCH PRESS TOOL C FRAME ​UNIPUNCH PUNCH PRESS TOOL C FRAME MODEL 8 BX 3/4" THROAT: 8-1/8" WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 10 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A ... more$4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) There will be a local pick-up fee for items purchased after 10/20/2008* Please contact us at 626-330-4647 if you would like to combine items to save on shipping and handling. We encourage customers to use there FEDEX/ UPS/ USPS account to ship out items. All items can be picked up and are shipped from 14911 Don Julian Rd. City of industry, CA 91746 626-330-4647 Payment Policy: PayPal: Yes we do accept paypal payments for all items being shipped out. IF you are picking up the item or having a friend pick up the item it must be paid in person at time of pick up. ALL NEW AND OLD BUYERS MUST CALL BEFORE
DIACRO STRIPPER ARMS + PLATES" WHITNEY JENSEN DIE SHOE/ DIACRO / PUNCH PRESS
DIACR STRIPPER ARMS THIS WILL FIT YOUR#1 AND#2 DIACRO AND MANY OTHER PUNCHES. ROPER WHITNEY,WHITNEY JENSE AND MORE PUNCHESPUNCH ALSO HECK OUT MY STORE FOR LOTS MORE.PUNCHES 732-642-8271 DIACRO STRIPPER ARMS AND PLATES
Unittool OBI Press Diamond Punch Die Holder - One
YOU ARE BIDDING FOR ONE UNITTOOL PUNCH AND DIE HOLDER. I KNOW THERE MAY BE MORE THAN ONE IN THE PHOTO. YOU ARE BIDDING FOR ONE. UNITOOL PUNCH/DIE PAIR. PUNCH IS DIAMOND SHAPED 1X5/8. 2-1/4W 3-1/2 DIE HT, 8-1/8 MIN SHUT HEIGHT. BUYER PAYS USPS PARCEL POST SHIPPING ON 30LBS FROM 30527 2009-14 PLEASE READ BEFORE BIDDING: EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. ... moreOUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SO
CUSTOM 12.5X10 IN. PUNCH PRESS DIE SET & FRAME U
Discount Industrial Equipment& Supplies, | | | | | | | | | | | | PRODUCT DESCRIPTION, IAR Stock# 4016 Condition Used-Good. Qty of Lots 1 Items In Lot 1. Location 2509. CUSTOM 12.5X10 IN. PUNCH PRESS DIE SET& FRAME U Make: CUSTOM. Model: 12.5'X10' SPECIFICATIONS- See Tech Spec tab for more details. Size: 12.5X10x11in. Width: 12.5. Type: punch press. Weight(Lbs) 92. Shipping dimensions(L in) 12.5(W in) 11(H in) 10. Click here for Shipping Estimate(Save money on combined shipping) Tech Spec CUSTOM 12.5'X10' PUNCH PRESS DIE SET& FRAME. Compliance Compliance. 2C50] CUSTOM 12.5X10 IN. PUNCH PRESS DIE SET& FRAME U.
DIACRO DIE SHOE 3 3/4 " WHITNEY JENSEN DIE SHOE/ ROPER WHITNEY / PUNCH PRESS
DIACRO DIE SHOE THIS WILL FIT YOUR#1 AND#2 DIACRO AND MANY OTHER PUNCHES. ROPER WHITNEY,WHITNEY JENSE AND MORE PUNCHESPUNCH ALSO HECK OUT MY STORE FOR LOTS MORE.PUNCHES 732-642-8271 DIACRO SHOE 3 3/4" 7.5 X 6 X 1 1/4"
2 PIECE STRIPPIT 8 BN 3/4 PUNCH PRESS TOOLING
Engineering Surplus Supplies Auction Terms Shipping Policy Return Policy Visit Store Join Newsletter 2 PIECE STRIPPIT 8 BN 3/4 PUNCH PRESS TOOLING Description 2 PIECE STRIPPIT 8 BN 3/4 PUNCH PRESS TOOLING/ PUNCH LOT 3 THROAT: 8-1/8" THICKNESS: 3/4" ITEM LOCATION:90016 Shipping: $ US38. Postal Service Parcel Post*More in store* This is in Good condition COMBINED SHIPPING OFFERED INTERNATIONAL SHIPPING& HANDLING FEES APPLY PLEASE EMAIL BEFORE CHECKOUT The above item description may have been taken from the internet for reference about the product. This information is to be used as an information reference only and not as a guarantee by TRINITY SURPLUS. Comes as shown in pictures $199- USED ITEMS ARE TESTED AGAINST D.O.A. THEY ARE NOT REFURBISHED UNLESS STATED Payment must be received in full within 7 days of the closing sale date. ... moreConfirmed paypal addresses are required for items over $200. Payment is accepted via PayPal. Personal check, cashier's check, or wire transfer. Items will be held until full payment is posted and cleared INTERNATIONAL SHIPPING& HANDLING FEES APPLY PLEASE EMAIL BEFORE CHECKOUT The buyer is responsible for all shipping. Handling, and insurance costs prior to shipment. Shipping is available to all 50 states. Outer lying territories. Items will be shipped within 4 business days of receiving a cleared payment. Shipments will be carried via UPS or USPS at our discretion. Insurance and signature confirmation are required for item purchases over $400. Combined shipping is available for items purchased within a 14 day period Returns are accepted within 7 days for items which are DOA or not as described. The buyer must report listing or description errors within 7 days of receipt. The return policy doesn't cover negligence. Abuse, or misuse of items. Items sold on an as is are not eligible for return. Returned items will be repaired. Exchanged, or refunded as we see fit. The buyer is responsible for all return shipping costs. Shipping and handling costs are
Roper Whitney Punch Press No 20S W/ Stand 1/2" x 1/2" Cap. Includes 15/32" Punch
This listing is for a Roper Whitney No. 20S Punch Press with the stand. 1/2" x 1/2" Capacity. This piece has been gone through and is in good condition. Includes a 15/32" Punch. Overall dimensions: 9" x 6-1/2" x 12" PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the ... moreclose of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to Contact our offices at 815-758-6534 or me personally at(248) 431-2587 Monday through Friday after
40 TON ROUSSELLE MODEL NO. 4F PUNCH PRESS, FABRICATOR, SHEET MRTAL
SquareTrade © AP6.0 40 TON ROUSSELLE MODEL 4F PUNCH PRESS 3 HP MOTOR. 208-240/460 VOLT 3 PHASE, WIRED AT 240 V AIR CLUTCH. AIR BRAKE DEEP THROAT DOUBLE PALM CONTROL 26" X 26" X 2" BOLSTER PLATE 16" SHUNT HEIGHT 3" STROKE OVERALL DIMENSIONS: 45" W X 67" D X 86" H WEIGHT 4900 LBS FOR ANY QUESTIONS CONTACT GERRY VIA EMAIL OR 727-547-0616. BUYER PAYS ACTUAL SHIPPING FROM 33782. LOCAL INSPECTIONS AND PICKUPS WELCOME. I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping. And the item is shipped, YOU. The BUYER. Are now responsible, ... morealong with the shipping service provider for the item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges. Such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 41 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Bid with confidence! On Oct-24-11 at 22:24:08 PDT. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
5 HP Price Self Contained Hydraulic Punch Press Power Unit with Table & Dies
Call Brett At 309-261-5695 for questions. BUYER PICKUP ONLY. 5 HP Price Self Contained Hydraulic Punch Press Power Unit with Table& Dies. Don't know much about. Came out of plant liquidation. 5 HP Lincoln motor. 230/460 3 phase. Oil has been drained from reservoir. The pump is Vickers PVB5-RSY-20-CM11 Stored inside Buyer pickup or responsible for sending truck. I will strap to pallet and load truck. Call Freightquote for shipping quote. 800-323-5441. Reference item number. View all photos carefully. Check out my! Payment due within 7 days of auctions end. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13f3b9acd92-0xf9-
10 Ton HANNIFIN Hydraulic stamping C Frame punch press 8" Stroke 9-1/2" Shut Ht
I ran this press and it runs fine. FREIGHT chained down to a Flat bed trailer OR LOCAL PICKUP ON LY This will need to ship on a Flat bed truck or trailer not in an enclosed van type truck. It needs to be chained down. I will not band it to a pallet and place it in a van, it is too heavy and tippy. Item. Hydraulic C Frame Press Manufacturer. Hannifin Corp Des Plaines IL Model. F-101-12 Serial Number. D17060 Capacity. 10 Ton Type. C- Frame Stroke. The depth stop it is set at 8" right now but it might adjust more than that. Not sure or how far. Throat Depth. 10" to center of ram Distance. 17-1/2" Open height Under the Ram up to the 10" diameter Plate Distance. 9-1/2" Shut height Under the Ram Table Size. 20" Wide x 18" Front to back Plate Thickness. 2" Ram Diameter. 3-1/2" Ram Free Speed. IPM Ram ... moreWork Speed. Ipm Ram Return Speed. Ipm Overall Height. Approx. 89" C Frame height. 27-1/2" Overall vertical opening Table height. 36" to Floor Footprint. 22" x 44" Pressure. PSI Max Condition. Good used. There are 2 steel arm/ levers you need to pull at the same time to trip the press. Motor. 7-1/2HP 240/480/3 phase presently wired for 240 volts Approx. Weight. 4100 lbs. Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within 30 days of
Press Brake Die Tooling Standard Acute Punch 12-1/2" Long
12-1/2" Knife punch 4-3/8" tall American Punch 1/2" tong USED PRESS BRAKE ACUTE DIE TOOLING*ALL DIMENSIONS SHOWN ARE SCALED AND THEREFORE APPROXIMATEUSED TOOLING SHOWS SIGNS OF RUST BUT ALL FORMING AREAS ARE FREE OF DAMAGE. CRACKS, OR DEFECTS.JUST TYPICAL WEAR FROM USE
Press Brake Die Tooling Standard Acute Punch 33-1/2"
33-1/2 Knife punch 3-5/8" tall American Punch 1/2" tong TWO(2) SECTIONS. ONE(1) 12-1/2" AND ONE(1) 11-7/8" USED PRESS BRAKE ACUTE PUNCH TOOLING*ALL DIMENSIONS SHOWN ARE SCALED AND THEREFORE APPROXIMATEUSED TOOLING SHOWS SIGNS OF RUST BUT ALL FORMING AREAS ARE FREE OF DAMAGE, CRACKS, OR DEFECTS.JUST TYPICAL WEAR FROM USE.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f4023bb9b-0xfa-
Muratec Centrum Magnum Wiedman Punch Press Programming Manual CNC
Up for grabs is an OEM Muratec Centrum Magnum Wiedmann. Turret Punch Press, Programming Manual Binder for Year Early 1990's 1991 1992 1993 1994 This Manual Covers Models: Centrum Magnum This Manuals Includes: Introduction Orientation DATA Formats Geometric Commands Options Tooling References This Manuals is over 1 inch thick Years 1990 1991 1992 1993 1994
Big Die Set Machinest Shoe Punch Precision Kick Press Tool & Die Danly
Die Set Approximate dimensions: Overall: 9" x 6 1/2" x 5 1/2" Die area: 5" x 6" Posted with
Lot of 4 #42 Ball Lock Retainer 3/8 Shank Punch Press Stamping Machine
Lot of 4#42 Ball Lock Retainer 3/8 Shank Punch Press Stamping Machine You are bidding on Lot of 4#42 Ball Lock Retainer 3/8 Shank Punch Press Stamping Machine. We’re guessing it is a Moeller IRE or IRG. Width: 1.25· Length: 2 5/8· Height: 13/16· Punch Diameter: 3/8” http:www.moellerpunch.com/PDF/MOELLER_INCH_CATALOG_0710_413.pdf CATALOGE LINK Return Policy: Within 14 days after receiving this item and if you believe that we misrepresented it. Please email us to set up a return shipment. All freight and handling charges are the responsibilities of the buyer, in both directions. The item must be returned in the same condition that it was shipped. Thank You SHIPPING: This item has a combined shipping weight of about 2 pounds and will be shipped USPS Priority Mail Padded Flat Rate Envelope. We combine shipping on all multiple orders. ... moreThere is no charge for pick up at our Northwest Detroit Suburb location. You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan. Make an appointment. Robert at spectorequipment.com 248-752-5084 We accept most forms of payment including: Credit Cards. Pay-Pal, personal, company and cashier’s checks, pay on pick up. All funds must clear our bank before delivery. TERMS 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3. We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the description. 5. No manuals. NO STANDARD POWER CORDS, acc
USI / CLEARING 22 TON FLYWHEEL TYPE PUNCH PRESS W/ AIR CLUTCH 130 SPM 3" STROKE
USI/CLEARING FLYWHEEL TYPE PRESS Specifications TORC-PAC CAPACITY: 22 TON STROKE: 3" MAX. SHUT HEIGHT TO BED:7 3/4" SDAU BED AREA: 21" RL X 11" FB SPEED: 130 SPM RAM AREA: 21"RL X 11"FB RAM ADJUSTMENT: 2" MANUAL ADJUSTMENT BOLSTER SIZE: 1.75" X 21 RL X 11" FB- SOLID DIST UPRIGHTS: 12" FLOOR TO BED: 30" ELECTRICS: 2 HP. 220/440V- 3 PHASE MOTOR& CONTROLS CLUTCH: TORC-PAC AIR CLUTCH/BRAKE OVERALL DIMENSIONS: 3'W X 7'H X 3'FB WEIGHT: 2.000 LBS EQUIPPED WITH: FLOOR STANDING BASE ROCKFORD CONTROL T-STAND(2 HAND CONTROL) BOLSTER PLATE LINK BRAKE MONITOR MOTOR& CONTROLS
FAMCO NO. 10 KICK PRESS PUNCH PRESS VINTAGE INDUSTRIAL AGE STEAMPUNK
VINTAGE FAMCO NUMBER 10 KICK PRESS LOOKS TO BE COMPLETE SELLING AS IS CONTACT ME FOR A FREIGHT QUOTE OR LOCAL PICKUP
ROUSELLE Model 2G 15 Ton Deep Throat Gap Frame Punch Press Machine
2G Deep Throat Gap Press Machine. 15 Tons Brand: Rousselle Model: 2G Deep Throat Gap Press Machine Description: Capacity: 15 Ton- Stroke: 2" Shutheight: 7-3/4" Adjustment: 1-1/2" Bed Area: 11" x 16" Throat Depth: 18" Flywheel Type. Speed: 160 SPM. Motor: 1 HP 115/230 Volt 1 Phase. Air-Actuated Mechanical Clutch. Electric Foot Switch. Weight: 2075 lbs.
Air-Mite Device Inc. DAP 7 Air Arbor Punch Press P 300 1.5 INCH STROKE TESTED
ap-7 AIR-RITE press With 1.5 inch stroke p 300 single acting punch excellent condition ready too be shipped tested was last calibrates 8/12/2012. for full specs on press and punch. Posted with
IRF #22 Square Ball Lock Retainer 3/8” Shank Punch Press Stamping Machine
IRF#22 Square Ball Lock Retainer 3/8” Shank Punch Press Stamping Machine You are bidding on a IRF#22 Square Ball Lock Retainer 3/8” Shank Punch Press Stamping Machine. We’re guessing it is a Moeller IRS 100 which matches its dimensions; the item is marked 22. Width: 1 3/8” Length: 1 3/8” Height: 1 3/16” Punch Diameter: 3/8” http:www.moellerpunch.com/PDF/MOELLER_INCH_CATALOG_0710_413.pdf CATALOGE LINK Return Policy: Within 14 days after receiving this item and if you believe that we misrepresented it. Please email us to set up a return shipment. All freight and handling charges are the responsibilities of the buyer, in both directions. The item must be returned in the same condition that it was shipped. Thank You SHIPPING: This item has a combined shipping weight of about 1 pounds and will be shipped USPS Priority Mail Padded Flat Rate Envelope. ... moreWe combine shipping on all multiple orders. There is no charge for pick up at our Northwest Detroit Suburb location. You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan. Make an appointment. Robert at spectorequipment.com 248-752-5084 We accept most forms of payment including: Credit Cards. Pay-Pal, personal, company and cashier’s checks, pay on pick up. All funds must clear our bank before delivery. TERMS 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3. We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the
IRS 100 Square Ball Lock Retainer 1” Shank Punch Press Stamping Machine
IRS 100 Square Ball Lock Retainer 1” Shank Punch Press Stamping Machine You are bidding on a IRS 100 Square Ball Lock Retainer 1” Shank Punch Press Stamping Machine. We’re guessing it is a Moeller IRS 100 which matches its dimensions; the item is marked 37. Width: 2 3/8” Length: 2 3/8” Height: 1 5/8” Punch Diameter: 1” http:www.moellerpunch.com/PDF/MOELLER_INCH_CATALOG_0710_413.pdf CATALOGE LINK Return Policy: Within 14 days after receiving this item and if you believe that we misrepresented it. Please email us to set up a return shipment. All freight and handling charges are the responsibilities of the buyer, in both directions. The item must be returned in the same condition that it was shipped. Thank You SHIPPING: This item has a combined shipping weight of about 2 pounds and will be shipped USPS Priority Mail Padded Flat Rate Envelope. ... moreWe combine shipping on all multiple orders. There is no charge for pick up at our Northwest Detroit Suburb location. You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan. Make an appointment. Robert at spectorequipment.com 248-752-5084 We accept most forms of payment including: Credit Cards. Pay-Pal, personal, company and cashier’s checks, pay on pick up. All funds must clear our bank before delivery. TERMS 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3. We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the descri
#54 Ball Lock Retainer 5/8” Shank Punch Press Stamping Machine
54 Ball Lock Retainer 5/8” Shank Punch Press Stamping Machine You are bidding on a#54 Ball Lock Retainer 5/8” Shank Punch Press Stamping Machine. We’re guessing it is a Moeller IRE or IRG. Width: 2” Length: 2 3/16” Height: 1 9/16” Punch Diameter: 5/8” http:www.moellerpunch.com/PDF/MOELLER_INCH_CATALOG_0710_413.pdf CATALOGE LINK Return Policy: Within 14 days after receiving this item and if you believe that we misrepresented it. Please email us to set up a return shipment. All freight and handling charges are the responsibilities of the buyer, in both directions. The item must be returned in the same condition that it was shipped. Thank You SHIPPING: This item has a combined shipping weight of about 2 pounds and will be shipped USPS Priority Mail Padded Flat Rate Envelope. We combine shipping on all multiple orders. There is no charge for ... morepick up at our Northwest Detroit Suburb location. You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan. Make an appointment. Robert at spectorequipment.com 248-752-5084 We accept most forms of payment including: Credit Cards. Pay-Pal, personal, company and cashier’s checks, pay on pick up. All funds must clear our bank before delivery. TERMS 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3. We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the description. 5. No manuals. NO STANDARD POWER CORDS, accessories, softwar
#41 Ball Lock Retainer 1” Shank Punch Press Stamping Machine
41 Ball Lock Retainer 1” Shank Punch Press Stamping Machine You are bidding on a#41 Ball Lock Retainer 1” Shank Punch Press Stamping Machine. We’re guessing it is a Moeller IRE or IRG. Width: 1 5/8” Length: 3 5/16” Height: 1 1/4” Punch Diameter: 1” http:www.moellerpunch.com/PDF/MOELLER_INCH_CATALOG_0710_413.pdf CATALOGE LINK Return Policy: Within 14 days after receiving this item and if you believe that we misrepresented it. Please email us to set up a return shipment. All freight and handling charges are the responsibilities of the buyer, in both directions. The item must be returned in the same condition that it was shipped. Thank You SHIPPING: This item has a combined shipping weight of about 2 pounds and will be shipped USPS Priority Mail Padded Flat Rate Envelope. We combine shipping on all multiple orders. There is no charge for pick ... moreup at our Northwest Detroit Suburb location. You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan. Make an appointment. Robert at spectorequipment.com 248-752-5084 We accept most forms of payment including: Credit Cards. Pay-Pal, personal, company and cashier’s checks, pay on pick up. All funds must clear our bank before delivery. TERMS 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3. We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the description. 5. No manuals. NO STANDARD POWER CORDS, accessories, software e
HRE 6 Ball Lock Retainer 3/4” Shank Punch Press Stamping Machine
HRE 6 Ball Lock Retainer 3/4” Shank Punch Press Stamping Machine You are bidding on a HRE 6 Ball Lock Retainer 3/4” Shank Punch Press Stamping Machine. We’re guessing it is a Moeller IRE or IRG. Width: 2” Length: 2 5/8” Height: 1 5/8” Punch Diameter: 3/4” http:www.moellerpunch.com/PDF/MOELLER_INCH_CATALOG_0710_413.pdf CATALOGE LINK Return Policy: Within 14 days after receiving this item and if you believe that we misrepresented it. Please email us to set up a return shipment. All freight and handling charges are the responsibilities of the buyer, in both directions. The item must be returned in the same condition that it was shipped. Thank You SHIPPING: This item has a combined shipping weight of about 2 pounds and will be shipped USPS Priority Mail Padded Flat Rate Envelope. We combine shipping on all multiple orders. There is no charge ... morefor pick up at our Northwest Detroit Suburb location. You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan. Make an appointment. Robert at spectorequipment.com 248-752-5084 We accept most forms of payment including: Credit Cards. Pay-Pal, personal, company and cashier’s checks, pay on pick up. All funds must clear our bank before delivery. TERMS 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3. We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the description. 5. No manuals. NO STANDARD POWER CORDS, accessories, softw
#57 Ball Lock Retainer 1” Shank Punch Press Stamping Machine
57 Ball Lock Retainer 1” Shank Punch Press Stamping Machine You are bidding on a#57 Ball Lock Retainer 1” Shank Punch Press Stamping Machine. We’re guessing it is a Moeller IRE or IRG. Width: 2” Length: 2 13/16” Height: 1 5/8” Punch Diameter: 1” http:www.moellerpunch.com/PDF/MOELLER_INCH_CATALOG_0710_413.pdf CATALOGE LINK Return Policy: Within 14 days after receiving this item and if you believe that we misrepresented it. Please email us to set up a return shipment. All freight and handling charges are the responsibilities of the buyer, in both directions. The item must be returned in the same condition that it was shipped. Thank You SHIPPING: This item has a combined shipping weight of about 2 pounds and will be shipped USPS Priority Mail Padded Flat Rate Envelope. We combine shipping on all multiple orders. There is no charge for pick up ... moreat our Northwest Detroit Suburb location. You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan. Make an appointment. Robert at spectorequipment.com 248-752-5084 We accept most forms of payment including: Credit Cards. Pay-Pal, personal, company and cashier’s checks, pay on pick up. All funds must clear our bank before delivery. TERMS 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3. We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the description. 5. No manuals. NO STANDARD POWER CORDS, accessories, software etc
Lot of 3 #4 Ball Lock Retainer 5/8 Shank Punch Press Stamping Machine
Lot of 3#4 Ball Lock Retainer 5/8 Shank Punch Press Stamping Machine You are bidding on Lot of 3#4 Ball Lock Retainer 5/8 Shank Punch Press Stamping Machine. We’re guessing it is a Moeller IRE or IRG. Width: 1.25· Length: 2 5/8· Height: 1 1/4· Punch Diameter: 5/8” http:www.moellerpunch.com/PDF/MOELLER_INCH_CATALOG_0710_413.pdf CATALOGE LINK Return Policy: Within 14 days after receiving this item and if you believe that we misrepresented it. Please email us to set up a return shipment. All freight and handling charges are the responsibilities of the buyer, in both directions. The item must be returned in the same condition that it was shipped. Thank You SHIPPING: This item has a combined shipping weight of about 3 pounds and will be shipped USPS Priority Mail Padded Flat Rate Envelope. We combine shipping on all multiple orders. ... moreThere is no charge for pick up at our Northwest Detroit Suburb location. You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan. Make an appointment. Robert at spectorequipment.com 248-752-5084 We accept most forms of payment including: Credit Cards. Pay-Pal, personal, company and cashier’s checks, pay on pick up. All funds must clear our bank before delivery. TERMS 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3. We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the description. 5. No manuals. NO STANDARD POWER CORDS, acces
BLISS C-150 Geared Design O.B.I. Punch Press
Item Name: BLISS C-150 Geared Design O.B.I. Punch Press Item# 8190 Price/Each: $18.995.00 Year: 1968 Brand Name: BLISS Model: C-150 Serial# C-193-01 Asset Tag: 6245 Item Location City: Philadelphia State: Pennsylvania Zip Code: 06787 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description Model C-150 BLISS. Geared Design, O.B.I. Punch Press, New 1968 Capacity: 150 Ton, Stroke: 6" Shut Height Over Bed(SDAU) 14-1/2" Slide Adjustment: 4-1/2" Bed Area: 50" L-R x 30" F-B, Slide Face Area: 34" L-R x 24" F-B, Opening In Bed: 21" L-R x 17" F-B, Opening Through Back: 31" Throat Depth: 16-1/2" ... moreSpeed: 37 SPM, Air Clutch and Brake with Selector Controls. Arranged for L-R Knockout, EQUIPPED WITH: Pneumatic Die Cushion in Bed, 2) Air Counterbalances to Slide, Bolster Plate(4-1/2" Thick) AC Main Drive Motor, Electrical Controls, Automatic Lubrication System, Dual Palm Button Operation(Pedestal) Motorized Inclining Jack, Overall Dimensions. Approx. 85" L-R x 128" F-B x 156" H, Weight, approx. 40,000 Lbs. New 1968. RIGGING AND HAULING NOT INCLUDED- Contact Us About This Machine Should you have questions. Please contact 860-484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days
64 Assorted Shoulder Punches, Buttons, Ball Locks & Punches Punch Press Stamping
64 Assorted Shoulder Punches. Buttons, Ball Locks& Punches Punch Press Stamping Machine You are bidding on 64 Assorted Shoulder Punches. Buttons, Ball Locks& Punches. INCLUDED IN THIS OFFERING ARE: 30-140SC x 3 ½ x.328 Shoulder Punches Basic Solid· 5 140HP x 3 ½ x.2164 Shoulder Punches Basic Solid· 1 140HP x 3 ½ x.320 Shoulder Punches Basic Solid· 1 S5 x 3 ¼ x 468 Shoulder Punches Basic Solid· 1 S105 x 3 ¾ x 438 Shoulder Punches Basic Solid· 1-165RB x 4 ½ x.500 Ball Lock· 1-173RB x 2 ¾ x 7/32· 1-DET#46 AIP Hollow Injector· 18-Assorted Press Fit Buttons· 1-1092 DET#100 Oblong Punch AIP· 1-1092 DET#45 Oblong Punch Button AIP· 1-SO8 x 3x 375 x 750 Oblong Punch HSS 3P· 1-617RB x 1 1/8 405 x.780 Oblong Punch Button· 1-118P x 3 Moeller Ball ... moreLock Punch http:www.moellerpunch.com/PDF/MOELLER_INCH_CATALOG_0710_413.pdf CATALOGE LINK Return Policy: Within 14 days after receiving this item and if you believe that we misrepresented it. Please email us to set up a return shipment. All freight and handling charges are the responsibilities of the buyer, in both directions. The item must be returned in the same condition that it was shipped. Thank You SHIPPING: This item has a combined shipping weight of about 11 pounds and will be shipped USPS Priority Mail Medium Flat Rate Box. We combine shipping on all multiple orders. There is no charge for pick up at our Northwest Detroit Suburb location. You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan. Make an appointment. Robert at spectorequipment.com 248-752-5084 We accept most forms of payment including: Credit Cards. Pay-Pal, personal, company and cashier’s checks, pay on pick up. All funds must clear our bank before delivery. TERMS 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observ