|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Condition: Used Location: Holland, United States FOB: Monclova Ohio. PALM BUTTONS. 50" X 30" BED. 22" SHUT HEIGHT. 15 HP 230/460/3/60. 35,000 LBS APPROXIMATE WEIGHT. 34" X 24" RAM.
Buy It Now
Condition: Used Location: Holland, United States 32″ Total height from bottom of mounting plate to bottom of bolster plate. 14.1 Ton Capacity. 100 mm Stroke (3.94″). 25.25″ x 13.12″ Top Cushion Pad.
Buy It Now
Condition: Used Location: Holland, United States 250 TON MINSTER SSDC PRESS. 25.50" SHUT HEIGHT. PALM BUTTONS. 60" x 48" RAM. AIR COUNTERBALANCES T SLOTTED RAM AND BOLSTER. 60" x 48" BED. 20" WINDOWS. ... moreAIR CLUTCH.
Buy It Now
Condition: Used Location: Holland, United States 330 TON CAPACITY. 14.2″ STROKE (360 mm). 86.6″ LR X 55.1″ FB SLIDE AREA (2200 mm X 1400 mm). T-SLOTTED SLIDE BOLSTER. 28.3″ DIE HEIGHT (S.D.A.U.) (719 ... moremm). 8″ THICKNESS T-SLOTTED BOLSTER.
Buy It Now
Condition: Used Location: Holland, United States 75 TON NEFF HYDRAULIC PRESS. Pressing Speed: 37 IPM. Bed Size: 31" x 23". Motor HP: 15. Year: 1997. Throat: 10".
Buy It Now
Condition: Used Location: Holland, United States 18″ SHUT HEIGHT. 1.5″ STROKE. 42″ x 18.5″ RAM. 16″ WINDOWS. REFERENCE NUMBER: 16053HH.
Buy It Now
Condition: Used Location: Monclova, United States Tech Line Pro Stake Staking Press. Bolster: Shuttle Table. Dual Palm Buttons: yes. Bed Size: 9" x 17".
Buy It Now
Condition: Used Location: Holland, United States NON MOTORIZED ( HAS MOTOR MISSING PARTS). 14″ MANDREL. 16″ – 20″ ID. REFERENCE NUMBER: 18080B. 4″ LR x 5′ FB x 5′ TALL. MANUAL EXPANSION. NO KEEPERS. ... moreELECTRIC DRAG BRAKE.
Buy It Now
Condition: Used Location: Holland, United States 1.5″ STROKE. 72″ x 6″ DIE RAIL. 72″ x 32″ BED AREA. HOLE IN BED FOR SCRAP REMOVAL. 32″-37″ HEIGHT FLOOR TO DIE. 8/95 MANUFACTURE DATE. 20 HP, 460/3/60 ... moreMOTOR. AIR CLUTCH & BRAKE.
Buy It Now
Condition: Used Location: Monclova, United States 6 Station Denison Roary Index Table. Table Size: 32" Drilled And Tapped. FOB: Delta Ohio. Serial # 21171G.
Buy It Now
Condition: Used Location: Philadelphia, United States Verson Model 400-B2-216-60 Straight Side Double Crank Press, New 1985. Bed size 216" long x 60" wide. Ram size 216" long x 60" wide. two one five, three ... morethree two, three two zero zero. 23'-6" long x 12' wide x 17'-6" high.
Buy It Now
Condition: Used Location: Holland, United States 20″ MANDREL. 12″-18″ I.D. REFERENCE NUMBER: 26030B. FAIR CONDITION. 3 ARM MANDREL.
Buy It Now
Condition: Used Location: Holland, United States Type: Presses, Hydraulic. Year: 1997. Floor Sanding: yes. Motor HP: 15 hp 460/3/60. Bed Size: 31" x 23".
Buy It Now
Condition: Used Location: Holland, United States 7.87″ STROKE. PALM STATION. 61″ x 32.6″ RAM. T-SLOTTED RAM AND BOLSTER. FLOOR STANDING. LINK DRIVE. 40 HP MOTOR. 50 -120 SPM.
Buy It Now
Condition: Used Location: Holland, United States 7.87″ STROKE. PALM STATION. 61″ x 37.4″RAM. T-SLOTTED RAM AND BOLSTER. FLOOR STANDING. LINK DRIVE. 40 HP MOTOR. 50 -120 SPM.
Buy It Now
Condition: Used Location: Bloomington, United States Everything seems to work very well with the exception of the foot pedal occasionally sticking. You are purchasing the machine as is. I will gladly demonstrate ... morethat to anyone with concerns. It does not affect the functionality of the machine in anyway.
Buy It Now
Condition: Used Location: Carrollton, United States Item. Ball Bearing guide for a stamping die qty.4 even though there is only 2 in the photo this is for 4 of them Manufacturer. Unknown but probably MDL ... moreModel. Not available Dimensions. ID is approx. 3" Dimensions. OD is approx. 3.475" this is the main body only. It will be probably be about 3-1/2" if you measure the outside diameter of the bearings when it is in the die set. Dimensions. Length overall is 7-1/4" Condition. Very Nice used. Almost like new yet Press brake straight side machine parts We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 M
Buy It Now
Condition: Used Location: Santa Fe Springs, United States
Buy It Now
Condition: Used Location: Tecate, United States Strippit Model FC-750 Fabri Center 30 Ton Turret Punch Nominal Rated Tonnage: 30 Tons Sheet Size: 30" X 40" Max. Model:FC-750 30 TON TURRET PUNCH. Type:Turret ... morePunch, CNC. working in good contition.
Buy It Now
Condition: Used Location: Santa Fe Springs, United States
Buy It Now
Condition: Used Location: Saint Charles, United States Punch Press Die for making 1-1/8" and 7/8" discs and washers.
Buy It Now
Condition: Used Location: Saint Charles, United States Die uses a 2-1/4" wide strip to cut shape with very little waste.
Buy It Now
Condition: Used Location: White Mills, United States punch press used 17 inches high. In working order. No motor..
Buy It Now
Condition: Used Location: Santa Fe Springs, United States Similar to Danly 0404-C1.
Buy It Now
Condition: Used Location: Santa Fe Springs, United States
Buy It Now
Condition: Used Location: Saint Charles, United States Die uses a 5-3/8" square to produce 4 circles with very little waste.
Buy It Now
Condition: Used Location: Saint Charles, United States Die uses a 3-3/4" wide strip.
Buy It Now
Condition: Used Location: Saint Charles, United States Die uses a 4-1/4" wide strip.
Buy It Now
Condition: Used Location: Euless, United States Make: Amada, Model: 304040, S/N: P 3440760, Control: 6MB Thin Turret Capacity: 30 Tons, Turret Stations: 40, Weight: 10.2 Tons, Mfg Date: 1983, Includes ... moreManual, Includes all/only items pictured. All items are"as pictured" I have a surplus store. Some"new" items may not include original packaging. I do my best to keep all quantities correct. All items listed on eBay should be in stock. I do not"broker" parts or anything like that. I have been in the trucking/distribution business for a long time. So you can expect your package to be shipped safely. I insure everything with FedEx. And will also personally back up your purchase(shipping, and the product itself) Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Condition: Used Location: Santee, United States 30 inch. Deep throat turret punch press Template type Manual stylus Tool and die assortment included(see picture)
Buy It Now
Condition: Used Location: Santa Fe Springs, United States
Buy It Now
Condition: Used Location: Saint Charles, United States 80 CHARACTERS PICK UP LONG ISLAND.NY D. B. DIE WORKS NO. 39 BENCH KICK FOOT DIE PUNCH PRESS GROMMETS STUFFED TOY EYES XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ... moreD B DIE NO. 39 KICK FOOT DIE PUNCH PRESS DESCRIPTION This is a bench mount D.B. Die Works No.39 steel foot kick press. Measures 42" tall with a 3 3/8" throat opening and 3/8" die mounting. No table.Stand or dies, this must be mounted on your bench. No cracks or damages. Made In The U.S.A. PICK UP ONLY- LONG ISLAND. N Y 11010,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-147d6f3643e-0x106-
Buy It Now
Condition: Used Location: Santa Fe Springs, United States
Buy It Now
Condition: Used Location: Manor, United States Jack Stefano for more information 1.800.382.8322 or email; jack(at) fmsweb. com Check our 100% Feed Back! Boschert Model EL 750 CNC Precision Hydraulic ... morePunching Machine with Full CNC Rotation S/N 043. New 2000 Maximum punching force. 36 Tons Maximum working range without repositioning. 30” x 60” Maximum punching diameter. 4” Maximum sheet thickness. ½” Maximum sheet thickness with standard material clamps. ¼” Thicker sheets can be clamped with adapters) Maximum sheet weight with material clamps. 440 lbs Maximum positioning speeds X– axis. Longitudinal. 2360 ipm Y– axis. Cross. 1180 ipm Stroke length(variable) 0– 1.57” Stroke rate(variable) 80- 250 spm Positioning accuracy. +/ 0.002” Positioning repeatability. +/ 0.001 General Specifications: Height of table above floor. 35” Approximate floor space required. 197”LR x 114”FB x 83”High Hydraulic oil reservoir capacity. 21 gallons Electric motor for hydraulic system. 7.5 HP Approximate weight of machine. 21.000 lbs. Color. RAL 5017 Blue Connected voltage. 220/440/3/60 Standard Features: Automatic pressurized lubrication system Heavy-duty tool adapter with rigid ram guidance for precise punch and die alignment Se
Buy It Now
Condition: Used Location: United States 150-Ton Minster P2-150-54"Piece-Maker" Punch Press Stock Number 1711014, Model P2-150-54, Age 1969, Capacity 150-Ton, Bed(RL/FB) 54" x ... more40" Slide Area 54" x 40" Stroke 6" Slide Adjustment 4" Shut-Height 23" Speed 45-90 SPM, Windows 20" wide, T-Slotted Ram, T-Slotted Bolster Plate, Minster Air Clutch& Brake, Tie Rod Construction, 44" x 18" FB Bed Opening, 56" Between Gibs, 40" Floor to top of beds, 25 HP, Floor Standing, Single End Drive, Wintress Spectrum Load analyzer& Probe Interfact, Perfecto 18" Wide Double Roll Feed& Scrap Chopper Scrap Conveyor, At Additional Cost: ADP Belt Type Washer 18" w x 5" tall max parts PAYMENT We accept Paypal. Wire Transfer, Check(must wait until clears to pick up) and Cash. We also accept credit cards direct(Visa, Mastercard, American Express, Discover) with a 3% service charge. Payment must be made in full within 4 days of a winning bid. CONTACT US You may contact us 9 AM- 5 PM Eastern Time weekdays at 419-536-4445. You can also use eBay's messaging feature. After hours. Contact Alex at 419-350-2986. If you purchase a"Local Pickup Only" item, please contact us as soon as possible for pickup or shipping instructions. SHIPPING If a shipping price is listed. We will ship within 2 business days after payment clears. The majority of our items are marked as"Local Pickup Only" This means that you are responsible for making freight arrangements, including palletizing, disassembly, rigging, loading, and transport. For your convenience, we offer all of these services for a fee based on the size/ complexity of the item. If your item requires freight shipping, please take into account the costs associated. Items not picked up within 30 days of payment may be subject to a storage charge of $25 per day. Items will be considered forfeit after 90 days, or after storage costs exceed the price of the item, whichever comes first. TERMS All sales are as-is. Where-is, with all faul
Buy It Now
Condition: Used Location: Pawtucket, United States ALLEN ALVA 5 TON PUNCH PRESS USED WORKING CONDITION
Buy It Now
Condition: Used Location: Santa Fe Springs, United States Similar to Danly 0806-C1.
Buy It Now
Condition: Used Location: Santa Fe Springs, United States Similar to Danly 0808-C1.
Buy It Now
Condition: Used Location: Kendall, United States One Pre-owned Strippit Custom 18/30 Press. Main drive motor 1 HP/1140 RPM. Table size 18” x 30”. Throat depth 18”. Capacity 30 Tons. Serial Number 797082288. ... moreMachine may be subject to a 1-2 week availability.
Buy It Now
Condition: Used Location: Medina, United States
Buy It Now
Condition: Used Location: Dekalb, United States The larger and taller a machine is the more likely they will require more than your average pallet. Pallets that need to be enlarged will require a larger ... morepallet fee. Video can be seen at this YouTube link (copy & paste).
Buy It Now
Condition: Used Location: Holland, United States 2″ SQUARE MAXIMUM PUNCH. 90 DEGREE L 6″ x 6″ x 1/2″. 10″ x 10″ x 1/4″ NOTCHING PRESS. 12″ x 5/8″ PRESS BRAKE CAPABILITY. 4000 LBS ESTIMATED WEIGHT. PLATE ... more24″ x 5/8″. SERIAL #: 13271.
Buy It Now
Condition: Used Location: Hartland, United States
Buy It Now
Condition: Used Location: Santa Fe Springs, United States Similar to Danly 0606-C1.
Buy It Now
Condition: Used Location: Pawtucket, United States
Buy It Now
Condition: Used Location: Pawtucket, United States
Buy It Now
Condition: Used Location: Lynnwood, United States
Buy It Now
Condition: Used Location: Onalaska, United States aims NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 ... morePM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Di Acro- Houdaille of Lake City. Minnesota. This is a 18-Station Turret Punch Press in GREAT condition. Model# 18-E Stylus Serial# 0660875150 Specifications: Number of Stations: 18. Maximum Material Capacity: 1/8" Punching Capacity: 2" in 16-gauge mild steel. Throat Depth: 19" Punching Speed: Up to 140 holes per minute. Crankshaft Speed: 245 strokes per minute. Overall Table Size: 60" x 36" Carriage Travel: 19" x 24" Work Piece Size: 19" x 24" Punch Motor: 1/2 Horsepower. 115/230 Volt, 1,725 rpm, 9/4.5 Amp, 60 Hz, Single Phase. Turret Motor: 1/4 Horsepower. 115 Volt, 1,725 rpm, 4.4 Amp, 60 Hz, Single Phase. Overall Dimensions: 62" x 66" x 68" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH PRESS- 18-E STYLUS NICE! DIACRO 7.5-TON 18-STATION TURRET PUNCH P
Condition: Used Location: Shiner, United States
Buy It Now
Condition: Used Location: Columbus, United States Everything appears to be there. Just needs to be mounted. Pretty heavy and all cast iron. Ask any questions. PAYPAL PAYMENTS
5d 12h 19m 2s 0 bids
$650.00 Now
Condition: Used Location: West Chester, United States Press Brake Hemming Die - American Style Spring Loaded Design similar to Midwest Press Brake Hemming Die #132. Utilizes a standard 30 degree upper punch ... more(not included). 72" overall length.
Buy It Now
Condition: Used Location: Azle, United States This is a spring loaded tubing notcher for 1 1/4" schedule 40 tubing in excellent used condition. This can be used on an iron worker or manual hydraulic ... morepress. It is 6" wide X 3 1/4" deep and 4" tall. It has stud mounting notches to mount it to your machine. Made in US and very well made.
Buy It Now
Condition: Used Location: Lodi, United States With its robust construction and precise engineering, it's designed to handle heavy-duty tasks with ease. - Komatsu quality and reliability. - Single ... morepoint gap press design. - Type: Single Point Gap Press.
Buy It Now
Condition: Used Location: Holland, United States Storm Vulcan 1000A. Surface Belt Sander. Rowe C6-40 7-Roll Coil Straightener. Belt Width 14". We work with you to find the right industrial machine tools, ... moreand provide services to help you with financing machines, liquidation, appraisals, and more.
Buy It Now
Condition: Used Location: Pawtucket, United States This press has seen less than 6 months service. It's old but mechanically very tight and in excellent condition. It's fitted with a 3/4 H.P DC ... moremotor( 110 V) with speed control.
Buy It Now
Condition: New Location: Oxnard, United States Our 20,000 Sqft Warehouse in Oxnard, CA is always full of Machine tools & accessories for Lathes, Mills & Grinders. USE FULL LINK. New Arrivals. TOOL ... moreR ARBORPR.
Buy It Now
Condition: Used Location: Houston, United States GENERAL SPECIFICATIONS Press Capacity 22 Tons Maximum Traverse 40” X 40” Maximum Sheet Size(With Repositioning) 40” X 100” Maximum Hits Per Minute 350 ... moreMaximum Sheet Weight 231 LBS Maximum Positioning Speed 2559 Inches Per Minute Total Tool Stations in Turret 44 Turret Configuration- H-Type Thick Turret 18@ 1/2" Dia 16@ 1-1/4" Dia. 4@ 2" Dia. 2@ 3-1/2" Dia. 2@ 4-1/2' Dia. 2@ Auto Índex(1-1/4" DIA. auto index configuration Angular Increment 0.01 Degree Maximum Nibbling Angle 8 Degree B—Directional Rotation AC Servo Drive 60 RPM Turret Speed 30 RPM Air Requirement 80 PSI Main Motor Horsepower 5.5 kW EQUIPPED WITH GE Fanuc 04 PC Control Auto Repositioning Hydraulic Clutch& Brake Ball Transfer Table Approximate Overall Dimensions 100” W X 81’H X 198’ L Approximate Overall Weight 17.000 LBS Any questions? 414-264-5848 More pictures at alecomachinery.com Loading included.
Buy It Now
Condition: Used Location: Chicago, United States Works as it should.
Buy It Now
Condition: Used Location: Stone Mountain, United States (3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. Cause of Action?). 7' x 6' x 1-1/4" ... moreHeavy Duty Steel Work Bench Welding Table w/ Irwin Vise.
Buy It Now
Condition: Used Location: Lynnwood, United States
|
|
|
|