|
Shars 0” – 1” Screw Thread Micrometer Pitch Diameter Used
You are bidding on a used Shars 0” 1” Screw Thread Micrometer Pitch Diameter. This comes with 5 anvils that interchange. This micrometer is used but appears to be taken good care of. The ratcheting thimble still works. The two lock mechanisim still works on the micrometer. The one lock allows you to lock the spindle while the other lock allows you to lock the anvil in place to calibrate the anvil. This is an imported model but would still be nice for your shop. It comes with a nice case. This item will be sold as-is. No returns or refunds once the item is purchased. Buyer pays all shipping costs. I ship to the 48 contiguous states in the U.S.A only. Accepted payment method is Paypal with a Confirmed Address only. PLEASE NOTE: OHIO RESIDENTS WILL HAVE SALES TAX ADDED TO THEIR TOTAL. Please note that I ship Monday through Friday only. Not Saturday ... moreor Sunday. I usually try to ship within 48 hours of your payment unless your payment is received on a Friday in which case it will be shipped the following Monday. E-mail with any questions or concerns you have before buying. I check my e-mails on a daily basis. PayPal—eBay's service to make fast. Easy, and secure payments for your eBay purchases!
|
|
|
Brown & Sharpe Direct Digital 1"-2" Outside Micrometer
This item is in good working condition. It is 1"2" and has a direct digital reading. It also has a friction thimble and is carbide tipped. If you have any questions about this item. Please do not hesitate to send me a message. Thank you Posted with 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-14022165943-0xf2-
|
|
|
Starrett micrometer 436XRL-1 *NICE* Carbide
Like new no engravings or scratches. No pitting or surface rust. Calibrated. Appears unused. Carbide faces. Comes with case and paperwork. Starrett decimal card included. Any questions feel free to ask. Happy bidding and good luck.
|
|
|
Machinists 7/26A (9) Craftsman (Made By Brown & Sharpe) 1-2 Micrometer
See Pic Cast Steel Base Works Fine Ratchet Thimble ````````````````````````````````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're ... morenot stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pi
|
|
|
MITUTOYO JAPAN! 7" - 8" OUTSIDE MICROMETER MODEL 103-222 .0001"
Mitutoyo 7" 8" Outside Micrometer Model 103-222 Manufactured in Japan! Carbide Tipped Contact Points.0001" Graduations Includes: Standard& Wrench Good Condition Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
MITUTOYO JAPAN! 10" - 11" OUTSIDE MICROMETER MODEL 103-225 .0001"
Mitutoyo 10" 11" Precision Outside Micrometer Model 103-225 Manufactured in Japan! Carbide Tipped Contact Points.0001" Graduations Includes: Standard& Wrench Good Condition Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
MITUTOYO JAPAN! 6 - 7" OUTSIDE MICROMETER MODEL 103-221 .0001"
Mitutoyo 6" 7" Outside Micrometer Model 103-221 Manufactured in Japan! Carbide Tipped Contact Points.0001" Graduations Includes: Standard& Wrench Good Condition Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
|
|
|
STARRETT No.124 INSIDE MICROMETER, 3" THRU 8"
Inventory Number: 04130775359 Manufacturer: Description: STARRETT No.124 INSIDE MICROMETER. 3" THRU 8" Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, SIZES AS FOLLOWS: 3" 4" 4" 5" 5" 6" 6" 7" 7" 8" BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to ... morehave it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction item
|
|
|
Lufkin Model 1925 Outside Micrometer 4" to 5" with wood storage case
This Sale is for a Lufkin Model 1925 Outside Micrometer 4 Inch– 5 Inch. In original wooden box! Lufkin Model: 1925· Outside Micrometer· 4 Inch– 5 Inch SOLD WITH A 14 DAY RIGHT OF INSPECTION Please CLICK HERE for our new eBay Manuals Store. First Choice Manuals" INTERNATIONAL BIDDERS SHIPPING COST NOTICE: Please request a shipping quote directly from us. EBay's shipping calculator may be quoting incorrect rates. Please email us for a discounted shipping quote prior to bidding on an item. Our office hours are 9-5 M-F Eastern Standard Time. U.S. Terms& Conditions Emails Please use Ebay’s Message System to communicate with us. Ebay’s message center provides for the most effective communication. Emails sent directly can be overlooked or filtered by our server which only causes frustration to all parties. Answering Questions ... moreAvitar’s business hours are Monday through Friday from 9:00 a.m. 5:00 p.m. Eastern Standard time. We will answer questions during those hours prior to the end of the auctions. Questions received over the weekend or on holidays will be answered Monday morning. Shipping Notes Shipping costs are to the US(Lower 48 States) Local pick-up is available by appointment only. Alaska and Hawaii residents please e-mail for a shipping quote before bidding. Shipping& Handling All items are professionally packed to arrive undamaged. UPS is our standard domestic carrier. International bidders please note that we will use USPS Priority mail for smaller. Less expensive items. However, USPS has both size and weight restrictions as well as insurance limits that vary from country to country. Any item that exceeds the aforementioned parameters will be shipped via Federal Express. We will pass along our substantial Federal Express discount and are happy to quote shipping cost to potential bidders prior to bidding. Please be aware that USPS takes longer than other carriers. We DO NOT ship to Egypt. Libya, Indonesia, Pakistan, Russian Federation, Yemen. Argentina, Brazil, or Venezuela. Internatio
|
|
|
Starrett 436.1RL-2 MICROMETER 1-2
WE BUY TOOLS You are bidding on Starrett 436.1RL-2 MICROMETER 1-2 Items are pre-owned and in good condition with signs of use(see pictures) NO OWNER MARKINGS/ ENGRAVINGS* Priced to Sell* Ask for discount when purchasing multiple items from SUPREMEDEALS4YOU All items are sold as PICTURED. I strive for 5 star feedback. If for ANY reason you are not happy with your purchase PLEASE CONTACT ME BEFORE LEAVING FEEDBACK! My goal is to make you a Happy Customer! Bid with Confidence! THANK YOU D5 Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
MITUTOYO WOODEN EMPTY micrometer set BOX 103-907 inside 12.5 x 6.5 x 5.875
empty instrument box 013-07-23-mihn PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, ... moreAND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, PAINT, ENGRAVING OR GREASE ON THEM. ASK FOR BETTER PICS IF YOU CARE* All items are subject to local
|
|
|
Mitutoyo (293-350-10) 4-5" IP65 Digital Micrometer insize a 4 to 5 blade mic
2 mics only ship to 2 states.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1402370dd2a-0xfc-
|
|
|
LUFKIN 0-3” DEPTH MICROMETER # 513, MACHINIST TOOLS.
Normal 0 vintage LUFKIN 0-3” DEPTH MICROMETER# 513 IN original WOODen BOX. the base is 3” long x 1/2" wide. it’S in very smooth working condition. I’M NOT SURE IF THE KNURLED KNOB IS A LOCK OR NOT. IF IT IS. IT DOES NOT WORK. INCLUDES ADJUSTMENT TOOL. Normal 0 PLEASE READ THE DESCRIPTION CAREFULLY. IF YOU HAVE QUESTIONS. PLEASE ASK BEFORE BIDDING. YOU WILL RECEIVE EXACTLY THE SAME ITEM THAT YOU SEE IN THE PICTURE. THE TOOLS I SELL ARE FROM ESTATES AND TOOL SHOPS THAT HAVE CLOSED. I DO NOT CALIBRATE OR GUARANTEE ACCURACY OF ANY TOOLS. NO INTERNATIONAL SHIPPING AND NO THIRD PARTY BIDDERS. I ACCEPT PAYMENT THRU PayPal ONLY. THANK YOU! Confirmation Number is Included with every Shipment.
|
|
|
3-4" MITUTOYO DIGITAL MICROMETER No.293-347
Nice mitutoyo 3-4 digital mic Reads 5 places to the right of decimal Free shipping Posted with
|
|
|
Lufkin 4-5 Inch Micrometer, With Fitted Wooden Case, But No Gauge Block
Lufkin 4-5 Inch Micrometer. With Fitted Wooden Case, But No Gauge Block. Visit my store for many other interesting and bargain items. My guarantee is 14 day money back. NO QUESTIONS ASKED, if your not happy I'm not happy!
|
|
|
Lufkin Carbide Tip Chrome-Clad Micrometer 1" CT 1611V 10,000th
Tungsten Carbide Faces- Extra hardness gives longer wear. Chrome Clad" Non Glare Finish. Easy to Read- Rust and Wear Resistant. Extra Large Figures- Easy to Read. Large Diameter Thimble with Wider Spaces Between Graduations- Easier to Read. Hardened One Piece Spindle with Ground Threads. Rigid Cut Away Frame. Rapid Reading- Each Thousandth Numbered. Easiest to Adjust. Micro-Lap. Mirror-Like Finish on Anvil and Spindle Ends. There is a name scribed on the back. Item has some markings from use over time.
|
|
|
Tumico T21/2B Tubular Micrometer
Tumico T21/2B Tubular Micrometer For your consideration is(1) Tumico T21/2B Tubular Micrometer. Used but in good condition with all of the components moving smoothly. Comes in a wooden box. Please take a look at all of the provided photos before placing your bid to thoroughly inspect the lot contents and condition. Item Condition: Used Return Policy: We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Shipping Info: Shipping weight is 3 lbs. Shipped from the Los Angeles area. zip 90221) Default Shipping Service: USPS Priority Mail California residents will be charged 9.00% sales tax. Tennessee residents will be charged 9.00% sales tax. We have offices in both California and Tennessee and are required to charge tax to any shipment sent anywhere ... morein ether state. We accept the following methods of payment: Call 1.800.421.2442 to pay via. credit card over the phone. For foreign orders we accept PayPal. We reserve the right to refuse other payment types at our discretion. We make our decision on a case by case basis. Due to previous problems with some foreign credit cards. After your item has shipped. We will email you the tracking info. ATTENTION FOREIGN BUYERS We will not make false statements on Customs Documents. When you buy an item it will not be listed as a"gift" It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import Taxes) could be due when the shipment enters your country. YOU are responsible for those duties/taxes; know your own country's rates/policies before you buy. Due to the various levels of service and care provided by the different postal services around the world. We cannot guarantee delivery outside the United States. Insurance is strongly suggested or may be required. If the item is returned/rejected from your country for any reason. We are happy to refund the cost of the item only, less any eBay fees and shipping costs. If you still want the item, we
|
|
|
Brown and Sharpe 3 pc micrometer set carbide tipped.
3 pc set. 0-1" 1-2" 2-3" Carbide tipped(no chips) 0001ths. friction knobs. Includes wood case, wrenches and standards. The empty space in the case is for the 4" mic that was sold separately. The tools have no rust. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-140239b6738-0x101-
|
|
|
Brown & Sharpe 10-100 Micrometer-Swiss Made- 0-25mm No. 102907-Inc Allen Wrench
Condition Very good used condition. Description Pros: Includes its own hard plastic case. Includes its own allen wrench. Has been very well maintained. Is 0-25mm. Is 10-100. Cons: Case has scratches and wear. Micrometer has light scratches and wear on edges. Please observe photographs below. I try to give accurate description of item or items; however. I am not perfect, and I am not an expert. If I have missed something. Please send me an e-mail with your question. Shipping* Seller ships only within the United States of America. USPS Delivery Confirmation is in the handling charge. UPS Ground includes tracking and insurance automatically up to $100. When paid. Seller ships promptly, one business day. Seller tries for actual and accurate shipping charges. To save the buyer shipping cost. I will combine items for shipments. Delivery times with ... moreUSPS and UPS: USPS Priority Mail takes 1 to 4 days. USPS Parcel Post takes 1 to 14 days. USPS First Class takes 1 to 7 days. UPS Ground takes 5 to 7 days. Physical address required. Thank you for looking and have a wonderful day.
|
|
|
Micrometer, Vintage Starrett 1 - 2" Range, (.001") & Setting Ring Micrometer USA
For your Consideration is this Vintage Starrett Micrometer. Including Setting Ring& Adjustment Wrench. L. S. Starrett. Athol, Mass. U.S.A" 1- 2" Range. 001" Steel Faces. Spindle lock. This Tool is in good used working condition and will be a nice addition to your Collection. See picture and email me with any questions. Please take a look at my other Ebay Stores. I have a lot of nice items listed there. MB9.4-5035 Normal 0 false false false EN-US X-NONE X-NONE International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. By purchasing this item the buyer accepts all responsibility for any ... moreaccident. Injury or, property damage to himself or other people resulting from the use, abuse or misuse of this item.
|
|
|
Brown & Sharpe 238 Intrimik Inside Micrometer 1.6-2.0” w/Master 599-238-20
This Sale is for a Brown& Sharpe 238 Intrimik Digital Inside Micrometer 1.6 to 2.0” with the optional Setting Ring Master. The three replaceable tungsten carbide measuring arms are flush with the bottom of the gage so that not only through holes but also blind holes can be measured. Has an etched inventory number. Model: 599-238-20· Measuring Depth: 5.4” Range: 1.600 to 2.000” Graduations: 0.0002” Accuracy: +/0.0001” SOLD WITH A 14 DAY RIGHT OF INSPECTION Please CLICK HERE for our new eBay Manuals Store. First Choice Manuals" INTERNATIONAL BIDDERS SHIPPING COST NOTICE: Please request a shipping quote directly from us. EBay's shipping calculator may be quoting incorrect rates. Please email us for a discounted shipping quote prior to bidding on an item. Our office hours are 9-5 M-F Eastern Standard Time. U.S. Terms& Conditions ... moreEmails Please use Ebay’s Message System to communicate with us. Ebay’s message center provides for the most effective communication. Emails sent directly can be overlooked or filtered by our server which only causes frustration to all parties. Answering Questions Avitar’s business hours are Monday through Friday from 9:00 a.m. 5:00 p.m. Eastern Standard time. We will answer questions during those hours prior to the end of the auctions. Questions received over the weekend or on holidays will be answered Monday morning. Shipping Notes Shipping costs are to the US(Lower 48 States) Local pick-up is available by appointment only. Alaska and Hawaii residents please e-mail for a shipping quote before bidding. Shipping& Handling All items are professionally packed to arrive undamaged. UPS is our standard domestic carrier. International bidders please note that we will use USPS Priority mail for smaller. Less expensive items. However, USPS has both size and weight restrictions as well as insurance limits that vary from country to country. Any item that exceeds the aforementioned parameters will be shipped via Federal Express. We will pass along our substantial Federal Express
|
|
|
LOT 2 MITUTOYO 323-311 0-1" 0-25MM .0001" 0.001MM DISC DISK MICROMETER CALIPER
TESTING& FUNCTIONAL NOTES: This item is untested. We were unable to test the item due to the lack of a proper power source. We have no reason to believe this item is not working; however. Since the full functioning status is unknown(which eBay considers to be"Parts or Repair" we are selling this item without a guarantee. Please bid accordingly! FULL FUNCTIONAL CONDITION UNKNOWN- ITEM ONLY GUARANTEED TO BE AS PICTURED: Our descriptions. And photos represent our best effort to relay all pertinent information about a product. We assure the buyer that they will receive the quantity, components, and level of operation shown in the photos. This does not not represent a guarantee or warranty about the item's functionality beyond what is depicted in the photos. In our experience of selling over 10,000 such items, customers are satisfied ... morewith these purchases 95% of the time. This means that 5% of the time we expect an item to have limited functionality and/or require repairs. We expect to receive less money for items sold in this condition; as a trade-off, we do not accept returns or offer refunds. We ask that our prospective buyers take these purchase terms into account and bid accordingly. COMPONENTS INCLUDED IN THIS AUCTION: 2) LOT 2 MITUTOYO 323-311 0-1" 0-25MM.0001" 0.001MM DISC DISK MICROMETER CALIPER Unless stated otherwise. Accessories such as Power Cords, Software, AC Adapters, and/or other Cables are not included. COSMETIC NOTES: This listing is for used item in acceptable cosmetic condition with scuffs and scratches associated with normal use. we are selling this item without a guarantee. Please bid accordingly! Please Click Here and Read Our Sales Policies at" at" src="http:ocdepot.com/template/Rounded_Middle_Right.gif" at" src="http:ocdepot.com/template/Rounded_Left_Bottom.gif" at" at" src="http:ocdepot.com/template/Rounded_Middle_Bottom.gif" at" src="http:ocdepot.com/template/Rounded_Right_Bottom.gif" SearchBy9-
|
|
|
Brown and Sharpe_1.200-1.400 Inside Micrometer_.0002 increments
Brown and Sharpe 1.200" 1.400" INSIDE MICROMETER.0002 Divisions No Case Included No Ring gage ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-140239b667f-0x101-
|
|
|
STARRETT #436 1-2 OUTSIDE MICROMETER .001 PLAIN FACES RATCHET THIMBLE GOOD USED
STARRETT#436 1-2 OUTSIDE MICROMETER.001 PLAIN FACES RATCHET THIMBLE GOOD USED Click to Enlarge Click to Enlarge GOOD USED STARRETT#436 1-2 OUTSIDE MICROMETER READS.001 WITH PLAIN FACES AND RATCHET THIMBLE. SHOWS USE WITH 3 SMALL INITIALS ON IY. TURNS SMOOTHLY. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
Mitutoyo 114-202 Mechanical V-Anvil 0.093-1" Vernier Micrometer - 0.0001"
Mitutoyo 114-202 Mechanical V-Anvil 0.093-1" Vernier Micrometer- 0.0001" Mitutoyo Mechanical V-Anvil Vernier Micrometer Model: 114-202. Range: 0.093- 1" Graduation: 0.0001" Thimble: Ratchet Please take a look at all of the provided photos before placing your bid to thoroughly inspect the lot contents and condition. Item Condition: Used Return Policy: We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Shipping Info: Shipping weight is 2 lbs. Shipped from the Los Angeles area. zip 90221) Default Shipping Service: USPS Priority Mail California residents will be charged 9.00% sales tax. Tennessee residents will be charged 9.00% sales tax. We have offices in both California and Tennessee and are required to charge tax to any shipment ... moresent anywhere in ether state. We accept the following methods of payment: Call 1.800.421.2442 to pay via. credit card over the phone. For foreign orders we accept PayPal. We reserve the right to refuse other payment types at our discretion. We make our decision on a case by case basis. Due to previous problems with some foreign credit cards. After your item has shipped. We will email you the tracking info. ATTENTION FOREIGN BUYERS We will not make false statements on Customs Documents. When you buy an item it will not be listed as a"gift" It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import Taxes) could be due when the shipment enters your country. YOU are responsible for those duties/taxes; know your own country's rates/policies before you buy. Due to the various levels of service and care provided by the different postal services around the world. We cannot guarantee delivery outside the United States. Insurance is strongly suggested or may be required. If the item is returned/rejected from your country for any reason. We are happy to refund the cost of the item only, less any eBay fees and shipping costs. If you stil
|
|
|
Huge lot of vintage inside micrometer rods and a brown and sharpe inside mic
Lot of mixed inside micrometer rods what you see in pics is what you get. I have no idea what they fit for sure. The brown and sharpe micrometer head turns freely. The box with 4& 6 inch extensions for 32" inside mic only has 4" All items have wear and marking on them. Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-140239b6628-0xfb-
|
|
|
Vintage Central Tool Co. - Inside Micrometer - Cranston, RI Certified Accuracy
This is a vintage Central Tool Company Micrometer. I am not an expert on these-but I believe it is an inside measurement tool. All parts appear to be here as all slots in the box are filled. The foam in the box is decaying slightly. There is some slight rust spotting on some of the shafts. This is from an estate of an avid car enthusiast. Please see the pictures for details and email me if you need more information. I will gladly respond. I will carefully wrap and ship to the Continental US within one business day of confirmed PayPal payment. Thanks! Check out my other items!
|
|
|
5-6" Starrett 436 OD Micrometer with ratchet thimble/carbide tips/.0001 incremen
Starrett OD Micrometer Comes with: 1) 5-6" 436 OD Micrometer with ratchet thimble/carbide tips/0001 increments The stationary end of the micrometer has a tiny chip(See Photo 5) Micrometers are in good working action and were my fathers. There is paint chipping on the edges but the micrometers work really nice.
|
|
|
MITUTOYO (MODEL 103-907-01) OUTSIDE CARBIDE TIP MICROMETER SET WITH STANDARDS
MITUTOYO OUTSIDE MICROMETER SET WITH STANDARDS(SEE PICS) 6 PIECE SET PLUS STANDARDS 0-1" 1-2" NO. 103-136 2-3" NO. 103-217 3-4" NO. 103-218 4-5" NO. 103-219 5-6" NO. 103-220.0001 GRADUATION CARBIDE TIPS WOODEN STORAGE CASE STANDARDS(SEE PICS) NO. 167-145 NO. 167-144 NO. 167-143 NO. 167-142 NO. 167-141 WOOODEN STORAGE CASE PLEASE SEE PICTURES AS THIS ITEM IS USED AND DOES SHOW SOME WEAR WHAT YOU SEE IN PICTURES IS WHAT YOUR GETTING. ITEM SOLD AS IS THANKS FOR LOOKING On May-23-13 at 10:13:23 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES:
|
|
|
Vintage TESA Tesa Master 0-1" Micrometer Engraved with #1644 GREAT CONDITION!!!!
Tesa Master by TESA Swiss Made 0-1" MicroMeter Engraved with#1644 In Great Condition! Ships Via USPS Priority Mail Enjoy! jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-14023a41c71-0xf5-
|
|
|
L.S. STARRETT CO Micrometer Head NO. 463, GOOD SHAPE
GOOD SHAPE. SOME STAINING, NO RUST, PITTING OR MAJOR SCRATCHES. I COMBINE SHIPPING WHEN POSSIBLE AND LOCAL P/U WELCOME.
|
|
|
BROWN & SHARPE 6-12 INCH MICROMETER SET .0001 CARBIDE IN BOX
VERY NICE WELL KEPT BROWN& SHARPE 6-12 INCH MICROMETER SET IN ORIGINAL BOX THESE MICROMETERS HAVE CARBIDE AND READ.0001 PLEASE LOOK AT MY FEEDBACK AND OTHER AUCTIONS FOR MORE GREAT BUYS GOOD LUCK BIDDING WILL EMAIL MORE PICTURES IF NEEDED THIS IS A BEAUTIFUL SET
|
|
|
VINTAGE MICROMETER GERMAN CENCO 0-25MM 0.01
This is a VINTAGE GERMAN MADE MICROMETER MADE BY CENCO. IN GOOD CONDITION. PLEASE LOOK CAREFULLY AT ALL OF THE PHOTOS AS THEY ARE PART OF THIS DESCRIPTION. STANDARD SHIPPING FOR THIS ITEM IS*$6.95* IN THE CONTINENTAL U.S.A. NO INTERNATIONAL SHIPPING* IF YOU HAVE LESS THAN 5 POSITIVE FEEDBACKS YOU MUST EMAIL ME FIRST BEFORE PLACING ANY BIDS or your bid may be removed. PayPal is the preferred method of payment and due within*3 days* of auction closing date. Thanks for looking and please watch for my other items both posted now and coming soon
|
|
|
SKF CMCP610 Eddy Probe Calibrator with Starrett 263 Micrometer
Call Brett At 309-261-5695 for questions. b2 SKF CMCP610 Eddy Probe Calibrator with Starrett 263 Micrometer View all photos carefully. Check out my other items! Payment due within 7 days of auctions end. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14023b84003-0x104-
|
|
|
Vintage Lufkin No.CT1661 V Outside Micrometer 0 - 1" Inch Carbide Tip Calibrated
This auction is for(1) made in the USA Vintage Lufkin Model Number CT1661V 0 to 1 inch outside micrometer. NEWLY CALIBRATED! This Lufkin outside micrometer features carbide tips. Spindle lock, ratchet thimble, tenths reading vernier scale and satin chrome finish to reduce glare and prevent rust. The micrometer comes in its original optional case with adjusting wrench. I thoroughly looked over the micrometer. Cleaned and oiled it with Starrett precision tool oil. WE OFFER COMBINED SHIPPING AND HAVE 1-2" MICS.2-3" MICS,VERNIERS,SO PLEASE Check out my! Be sure to add me to your! Thanks for looking.
|
|
|
Antique LS Starrett Micrometer 1 1/2-2 1/2"
This has to be the oldest micrometer that I've ever sold. Have not seen one like it, LS Starrett, looks like it measures from 1 1/2" to 2 1/2" 001, mic anvil is scarred up, needs cleaned up, turns tight. Sold as is condition. approx shipping weight is 1.5 lbs. Inv loc- 8H Be sure to check out our store for more great deals. We combine shipping whenever possible.
|
|
|
Starrett No 436 1 - 2 Inch Micrometer Tenths No Box Very Nice Used Set Machinist
Starrett# 436 1"2" micrometer in ex used condition
|
|
|
0-1" Indicating Micrometer, Indicator Snap Micrometer, 0.0001" Nice Condition
0-1" Indicating Micrometer. Indicator Snap Micrometer, 0.0001" Nice Condition This is used. Excellent condition as the photos show, has a small engraving on reverse. Not sure of manufacturer but very precision micrometer. My husband kept this in a zipped bag inside of a foam lined plastic container which will be included. He took great care of his tools! Thank You! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14025c47713-0x106-
|
|
|
STARRETT 206 MICROMETER GAGE STAND MACHINIST TOOL FREE SHIPPING!!
Up for auction is a used Starrett Micrometer stand(model#206) It's in great condition. With swivel fully functional and clamp is in"like new" position. I accept papal and ship in the US. Good Luck and Happy bidding!
|
|
|
FXR Microlab K312CF WR42 E-H Plane Tuner, Micrometer Drives 18-26.5ghz
You are bidding on one used FXR Microlab K312CF WR42 E-H Plane Tuner. Micrometer Drives 18-26.5ghz. This listing is for what is pictured only unless description states otherwise. Unit has some marks in the display and one side button is missingbut unit is usable. I will guarantee this item not to be DOA. We do combine shipping so please check out our other items. I prefer payment through PayPal. Thanks for Looking and Good Luck! US SALES ONLY UNLESS OTHERWISE APPROVED! PLEASE CONTACT US THROUGH EBAY. DOA Policy* If item is sold with DOA warranty and item is received DOA the buyer must email within 14 days of receiving the item.
|
|
|
0-4" Depth Micrometer Manufacturing & Metalworking Tooling Inspection
0-4" Depth Micrometer Manufacturing& Metalworking Tooling Inspection This item is NOT from a smoke free or pet free home. If you have any questions PLEASE email me BEFORE bidding. If you would like shipping insurance on the item you are bidding on you must let me know in advance so that I may add it to your total before you pay. Thank you for taking the time to look. I will combine shipping in this manner: I will use the highest shipping price first. Then for any additional items, their shipping cost will be cut in half.
|
|
|
Brown and Sharpe Inside Micrometer Model 595 set 595-1 595-2 595-3 595-4
You are bidding on a set of Brown and Sharpe Model 595-1.2,3,4 inside micrometers. Each one is stamped B& S MFG CO Prov R.I. U.S.A. The largest one has an engraving in it. All seem to work great. 595-1 Range from.125” to.200” 595-2 Range from.200” to.300” 595-3 Range from.300” to.400” 595-4 Range from.400” to.500” Ship inside United States only please. Excluding Hawaii or Alaska PayPal Only. If payment is not received in 3 days auction will be closed and the item will be reposted. All non-payers will be reported to Ebay. Sold as is and normally ship within 3 business days of payment Thanks for Looking
|
|
|
The Central Tool Co. Micrometer #12RL Satin Chrome
The Central Certified Accuracy Tool Co. Micrometer#12RL 0-1" Satin Chrome w/Friction Stop and Locknut comes in original box works. Good condition, buyer pays shipping $4.00
|
|
|
MITUTOYO DIAL MICROMETER~NO.7326~6 JEWELS~MADE IN JAPAN~.0001"-.050"~VINTAGE
This auction is for one used Mitutoyo Dial Micrometer NO. 7326 with plastic case. This Item has been in storage for some time and may have some light scratches and dust or dirt on the case but seems to work as it should(it looks to be in good condition) Auction Includes only what you see in the picture. I am in the process of cleaning out my shop and all this stuff needs to go! This item is selling“as-is no returns! I try to provide accurate. Detailed information about each item. If you have any questions, please email me before placing a bid. All sales are final, no returns. Auction is for only what you see in the picture. Thanks for looking. Auction is for items shown in the picture and includes nothing else. Please read the item description before bidding and e-mail me with any questions you may have. Don't assume anything! Buyer is ... moreresponsible for shipping charges. Shipping will be $7.00 in the US and to the lower 48 only! Thanks for looking at my auctions! This item is sold AS-IS and has no warranty. NO returns! CONDITIONS& TERMS: Payment is via PAY PAL to verified addresses only(no exceptions) Payment must be received within 3 days and transaction must be completed within 5 days or sale is void. By bidding on this auction you confirm that you have read and understand all policies listed and are happy with the items as pictured. If you have any questions Please ask them before this auction ends. No warranty is offered for cosmetic conditions of items. The pictures in this auction shows the actual item and condition of the item. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Thorlabs GM200 Gimbal Kinematic Mount for 2" Optics, 2-Axis Micrometer Drive
Thorlabs GM200 vertical drive gimbal mount for 2" diameter optics. +/ 2deg range at 0.004deg per division of graduated adjustment knobs. Like-new condition. Retaining ring and a custom blank piece(see last photo) are included. For more information. See Thorlabs product page at the link below: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Payments, Shipping. And Returns: We allow a 14-day right of inspection. Any r eturn shipping must be by traceable and insured means. Buyer will be responsible for all shipping costs. Items are typically shipped within 1-3 business days following a cleared payment. We minimize buyer's cost by re-using shipping supplies and selecting the lowest rate service available. Buyer may request alternative shipping services. Including overnight delivery when available. Multiple items ... morewill be automatically combined into a single shipment when possible. Pennsylvania residents pay sales tax. International buyers are welcome. All international payments must be made through PayPal. International buyers are solely responsible for import duties and/or brokerage fees. We offer low-cost shipping by USPS Priority Mail International when available. Please note that typical international delivery takes 2-4 weeks and there have been occasional delays of over 8 weeks. We are not responsible for shipment delays due to circumstances outside our control. If your purchase is time-critical. Please select UPS Worldwide service or contact us for other available options.
|
|
|
STARRETT MICROMETER DEPTH GAGE GAUGE CPNR-1224 !! D
STARRETT MICROMETER DEPTH GAGE GAUGE CPNR-1224! D FULLY TESTED AND WORKING PROPERLY. Cosmetically this come exactly as shown in the pictures. Each picture can be enlarged by clicking on it. Additional pictures are located at the bottom of the ad. Sales within the State of Colorado Will have State and local tax applied where applicable. Local pick up is always welcome in Colorado Springs. CO USA We take care to pack your items professionally. Therefore items can take up to 7 days or more to ship after payment has cleared when we are backed up. Typically it is only a couple of days after but it does very through the seasons. If there is a critical need for immediate shipping(24 hours from time of payment, Monday through Friday) please let us know immediately after payment has been made. We try our hardest to give 5-Star Service by giving Clear. ... moreAccurate and Honest descriptions to the best of our abilities. We also clearly state our return policies and shipping terms upfront so you know what to expect. If you are pleased with this transaction. Please respond with all 5 Stars! If you are not pleased for any reason, Please contact us using the Contact Seller link on the auction page, and we'll try and make it a Five Star Sale! No C.O.Ds please.Payment due within 7 days of auction end.
|
|
|
Goodell Pratt USA 4" base depth micrometer 0-1" tool machinist toolmaker
you get what you see except for the $1.used.works.engraved.with a 0-1" pointed rod only.I will combine shipping.$1 handling per auction on combined orders only.On combined orders I charge what it costs me to ship plus $1 handling per item) Connecticut buyers to pay 6.35% sales tax. Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us. 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-1402a9e0399-0xf8-
|
|
|
VINTAGE LUFKIN PRECISION MICROMETER #CT1661 (0"-1")
This is a vintage Lufkin Rule Co Micrometer#1661. It measure from 0"1" It comes with the original instructions and other papers. As well as 4 wrenches that I have no idea what they are for. It is used and does need to be cleaned. I niether clean nor repair my items. Please view all pics carefully BEFORE bidding. All questions are welcome. Check out my other items on eBay. Combined shipping is available on some items/lots.
|
|
|
1902 Brown & Sharpe Micrometer Caliper with Wood Handle In Original Wooden Box
This is the#17 design Brown& Sharpe Mfg Co micrometer caliper patented December 31. 1902. It costs $6.00 back then and only $1.75 to add the cool wooden handle! The side of the box that it is contained in has some of the information on it. There is an ordering number also and it is English or Metric measure. It is in phenomenal condition! The original paperwork is also included. There is a small rip in the front page of the instructions and they are a little worn. But, otherwise It is completely readable. Thank you for looking. If you have any questions. Feel free to ask. Please remit payment within 7 days.
|
|
|
Vintage Starrett No. 436-1" -2" Micrometer, Gunsmith, Machinist, Good Condition
Up for sale is this vintage Starrett No. 436-1"2" micrometer This is a beauty with no owners marks or initials. And just needs a little detailing to make it shine. Please view all of the pictures to determine condition for yourself. More machinist tools this week's auctions. Be sure to check out my other auctions and my ebay store for more vintage tools! I will always combine shipping on multiple winning bids to save you money on shipping.
|
|
|
Starrett #226 Micrometer - 2"-3" ~~ with wooden box
Starrett#226 Micrometer- 2" 3" Complete. This comes with a nice wooded box, however someone wrote"c vernier" on the front(see last picture)
|
|
|
Tumico 2 - 3 inch Tubular Micrometer Starrett Fowler
Offered here is a Tumico Brand Tubular Micrometer. The range is 2 inch to 3 inch. Comes in box with standard as pictured. In nice shape. WE CARRY A COMPLETE LINE OF ENGINE REBUILDING EQUIPMENT and SHOP SUPPLIES Please or if you don't see something listed that you need. Powered by
|
|
|
STARRETT GREAT BRITAIN 9"-10" MICROMETER MEASURING TOOLS TOOL ORIGINAL BOX
STARRETT 9"10" MICROMETER MEASURING TOOLS.ORIGINAL WOODEN BOX GOOD CONDITION. PLEASE NOTE IT MAY APPEAR PARTS ARE MISSING BECAUSE OF THE SPACES IN BOX BUT THIS IS NOT THE CASE.THEY HAD A STANDARD BOX FOR ALL SETS. PLEASE NOTE I AM ONE OF THE FEW SELLERS ON EBAY THAT REFUNDS ANY EXCESSIVE POSTAGE PAID.IF I HAVE CHARGED YOU £15 FOR POSTAGE.AND IT HAS ONLY COST £12 YOU WILL HAVE A REFUND OF £3 PAID INTO YOUR PAY PAL BEFORE YOUR ITEM EVEN ARRIVES.YOU CAN THEN CHECK THE PRICE ON POSTAGE STAMP WHEN ITEM ARRIVES.THIS METHOD IS PROOF THAT YOU CANNOT BE OVERCHARGED FOR POSTAGE,SO BID WITH CONFIDENCE.BUYERS HAVE BEEN FULL OF PRAISE FOR MY REFUND SYSTEM AND MOST HAVE NOT EXPERIENCED HAVING A REFUND ON POSTAGE BEFORE,SO IF YOU THINK POSTAGE IS A LITTLE HIGH HAVE NO FEAR AS YOU WILL GET A REFUND IF IT IS OVER, PLEASE NOTE THAT ... moreDISPATCH TIME IS THE TIME IT TAKES FOR ITEM SENT LOGO TO APPEAR ON YOUR EBAY NOT DELIVERY TIME.I HAVE NO CONTROL OVER POST AFTER POSTING.WITH NEW SECURITY MEASURES CONSTANTLY CAUSING DELAYS AT CUSTOMS,POST CAN TAKE LONGER THAN NORMAL PLEASE BE PATIENT AS ITEMS WILL ALWAYS ARRIVE, I AM THAT CONFIDENT YOU WILL BE HAPPY WITH PURCHASE THAT I OFFER A FULL MONEY BACK GUARANTEE ON ANY ITEM.INCLUDING RETURN POST REGARDLESS OF THE REASON.AGAIN THIS MEANS YOU CAN BID WITH CONFIDENCE KNOWING YOU HAVE NOTHING TO LOSE. I DONT GO OVER THE TOP WITH DESCRIPTIONS.I SAY IT HOW IT IS.IF THERE IS SOMETHING WRONG I WILL TELL YOU. I DONT KNOW EVERYTHING ABOUT EVERYTHING.IF I HAVE LISTED SOMETHING WRONG PLEASE TELL ME SO I CAN PUT IT RIGHT.IF THERE IS ANYTHING THAT YOU ARE LOOKING FOR OR COLLECT PLEASE LET ME KNOW AS I ATTEND MANY AUCTIONS AND COME ACROSS JUST ABOUT ANYTHING SO IF I KNOW WHAT YOUR LOOKING FOR AND I SEE IT I WILL PURCHASE IT. I INSIST ON HONESTY.PLEASE DO NOT BID ON ITEMS IF YOU HAVE NO INTENTION OF PURCHASING THE ITEM.IF YOU BID AND WIN ITEM PLEASE PAY ASAP AS YOU CAN SEE IN MY FEEDBACK.I LIKE TO DISPATC H ITEMS QUICK.IF YOU PAY QUICK IT HELPS I POST EVERYTHING FIRST CLASS SMALL PACKE
|
|
|
MOORE & WRIGHT NO 971 12" -13" MICROMETER MEASURING TOOLS TOOL ORIGINAL BOX
MOORE& WRIGHT NO 971 12" 13" MICROMETER MEASURING TOOLS.ORIGINAL WOODEN BOX GOOD CONDITION. PLEASE NOTE IT MAY APPEAR PARTS ARE MISSING BECAUSE OF THE SPACES IN BOX BUT THIS IS NOT THE CASE.THEY HAD A STANDARD BOX FOR ALL SETS. PLEASE NOTE I AM ONE OF THE FEW SELLERS ON EBAY THAT REFUNDS ANY EXCESSIVE POSTAGE PAID.IF I HAVE CHARGED YOU £15 FOR POSTAGE.AND IT HAS ONLY COST £12 YOU WILL HAVE A REFUND OF £3 PAID INTO YOUR PAY PAL BEFORE YOUR ITEM EVEN ARRIVES.YOU CAN THEN CHECK THE PRICE ON POSTAGE STAMP WHEN ITEM ARRIVES.THIS METHOD IS PROOF THAT YOU CANNOT BE OVERCHARGED FOR POSTAGE,SO BID WITH CONFIDENCE.BUYERS HAVE BEEN FULL OF PRAISE FOR MY REFUND SYSTEM AND MOST HAVE NOT EXPERIENCED HAVING A REFUND ON POSTAGE BEFORE,SO IF YOU THINK POSTAGE IS A LITTLE HIGH HAVE NO FEAR AS YOU WILL GET A REFUND IF IT IS OVER, ... morePLEASE NOTE THAT DISPATCH TIME IS THE TIME IT TAKES FOR ITEM SENT LOGO TO APPEAR ON YOUR EBAY NOT DELIVERY TIME.I HAVE NO CONTROL OVER POST AFTER POSTING.WITH NEW SECURITY MEASURES CONSTANTLY CAUSING DELAYS AT CUSTOMS,POST CAN TAKE LONGER THAN NORMAL PLEASE BE PATIENT AS ITEMS WILL ALWAYS ARRIVE, I AM THAT CONFIDENT YOU WILL BE HAPPY WITH PURCHASE THAT I OFFER A FULL MONEY BACK GUARANTEE ON ANY ITEM.INCLUDING RETURN POST REGARDLESS OF THE REASON.AGAIN THIS MEANS YOU CAN BID WITH CONFIDENCE KNOWING YOU HAVE NOTHING TO LOSE. I DONT GO OVER THE TOP WITH DESCRIPTIONS.I SAY IT HOW IT IS.IF THERE IS SOMETHING WRONG I WILL TELL YOU. I DONT KNOW EVERYTHING ABOUT EVERYTHING.IF I HAVE LISTED SOMETHING WRONG PLEASE TELL ME SO I CAN PUT IT RIGHT.IF THERE IS ANYTHING THAT YOU ARE LOOKING FOR OR COLLECT PLEASE LET ME KNOW AS I ATTEND MANY AUCTIONS AND COME ACROSS JUST ABOUT ANYTHING SO IF I KNOW WHAT YOUR LOOKING FOR AND I SEE IT I WILL PURCHASE IT. I INSIST ON HONESTY.PLEASE DO NOT BID ON ITEMS IF YOU HAVE NO INTENTION OF PURCHASING THE ITEM.IF YOU BID AND WIN ITEM PLEASE PAY ASAP AS YOU CAN SEE IN MY FEEDBACK.I LIKE TO DISPATC H ITEMS QUICK.IF YOU PAY QUICK IT HELPS I POST EVERYTHING FIRST
|
|
|
Mitutoyo 0-1" Spherical Anvil Digital TUBE Micrometer .0001" reading No295-153
This auction is for a Mitutoyo 0-1" Spherical Anvil Digital TUBE Micrometer.0001" reading No295-153. It is used but in great working condition. Thanks for looking.
|
|
|
MITUTOYO ELECTRONIC DIGITAL MICROMETER 0-6" RANGE No. 329-711
Mitutoyo Digimatic Depth Micrometer No. 329-711 Range 0- 6" Includes 6 Rods& New Battery Condition: Good Questions? call Metro Machine& Tool 732-650-0666
|
|
|
STARRETT #436 1-2 INCH MICROMETER WITH STANDARD .0001 CARBIDE
STARRETT 1-2.0001 CARBIDE WITH A STANDARD AS SHOWN IN PICTURE.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1402c8879d4-0xfe-
|
|
|
MITUTOYO 103-134 25-50MM .001 METRIC OUTSIDE MICROMETER USED FREE SHIPPING
YOU ARE BIDDING ON A USED MITUTOYO 103-134 25-50MM.001 METRIC OUTSIDE MICROMETER. THE MIC DOES SHOW SOME WEAR BUT IS IN GOOD USABLE CONDITION. THIS ITEM WILL COME AS PICTURED. SHIPPING TO THE LOWER 48 STATES WILL BE FREE.
|
|
|
L.S. STARRETT DEPTHING MICROMETER No. 449 & ORIGINAL WOODEN CASE
Offered is a Starrett depthing micrometer in the original wooden case. No.449. Shipping will run $10.00 within the US. $23.95 International shipping. Posted with f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-1402c98f7cd-0x105-
|
|
|
Browne and Sharpe 0-1" Blade Micrometer in .0001 Divisions
Browne and Sharpe 0-1" Blade Micrometer in.0001 Divisions For your consideration is(1) Browne and Sharpe 0-1" Blade Micrometer in.0001 divisions. Though this item is used it is in good condition with all the parts moving freely and smoothly. Encased in a wooden box for protection. Please take a look at all of the provided photos before placing your bid to thoroughly inspect the lot contents and condition. Item Condition: Used- Has markings from previous owner(see in photos) Return Policy: We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Shipping Info: Shipping weight is 3 lbs. Shipped from the Los Angeles area. zip 90221) Default Shipping Service: USPS Priority Mail California residents will be charged 9.00% sales tax. Tennessee residents ... morewill be charged 9.00% sales tax. We have offices in both California and Tennessee and are required to charge tax to any shipment sent anywhere in ether state. We accept the following methods of payment: Call 1.800.421.2442 to pay via. credit card over the phone. For foreign orders we accept PayPal. We reserve the right to refuse other payment types at our discretion. We make our decision on a case by case basis. Due to previous problems with some foreign credit cards. After your item has shipped. We will email you the tracking info. ATTENTION FOREIGN BUYERS We will not make false statements on Customs Documents. When you buy an item it will not be listed as a"gift" It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import Taxes) could be due when the shipment enters your country. YOU are responsible for those duties/taxes; know your own country's rates/policies before you buy. Due to the various levels of service and care provided by the different postal services around the world. We cannot guarantee delivery outside the United States. Insurance is strongly suggested or may be required. If the item is returned/rejected fro
|
|
|
STARRETT MICROMETER CALIPER NO.436 15"-16",WOODEN CASE,PRECISION MACHINE TOOLS
I HAVE STARRETT MICROMETER CALIPER NO.436; RANGE 15" TO 16" ORIGINAL WOODEN CASE INCLUDED. THIS TOOL IS MADE IN USA. THERE IS NO SIGN OF BROKEN OR CRACK ON THIS MICROMETER. SOLD AS IS AS SHOWN ON THE PICTURE. PLEASE ASK QUESTION IF YOU NEED MORE INFO. I SAW FEW SMALL ENGRAVE LETTERS; OTHERWISE THIS MICROMETER LOOKS VERY CLEAN, THERE IS VERY LITTLE SIGN OF BEING USE, HAS BEEN SITTING MY IN MY BASEMENT AT LEAST 20 YEARS. FREE SHIPPING VIA FEDEX GROUND WITHIN MAINLAND USA. RETAIL(NEW) ON AMAZON WAS $591.00. FREE U S/ DOMESTIC STANDARD SHIPPING INTERNATIONAL BUYER PLEASE ASK FOR SHIPPING QUOTE BEFORE PLACE A BID. I HAVE MORE CALIPERS/ MICROMETERS IN DIFFERENT SIZES AND MODEL. PLEASE LOOK AT MY OTHER FUTURE AUCTIONS, I ALSO WILL COMBINE THE SHIPPING COST FOR INTERNATIONAL BUYERS. THANKS FOR VISITING MY AUCTION.
|
|
|
BROWN & SHARPE MFG. CO. #607 DEPTHING MICROMETER
Offered is a Brown& Sharpe depthing micrometer. No. 607. Shipping will run $10.00 within the US. $23.95 International shipping. Posted with
|
|
|
Mitutoyo No. 293-766-10 1" Digital Micrometer in Factory Case EXC!!
Mitutoyo No. 293-766-10 1" Carbide Faced Micrometer in Factory Case. This micrometer looks brand new. No paint chips or markings of any kind on it. It features inch/mm settings, Hold, Zero/ABS and Origin settings. It has a friction Thimble and a barrel lock. The case has a small crack in one corner that has been repaired. Includes setting wrench. An excellent micrometer. Will ship in a small flat rate box. Thanks for looking!
|
|
|
STARRETT 207Z MICROMETER
STARRETT CAN SEAM MICROMETER Starrett Can Seam Micrometer. Snub Nose, 0-0. 75 In 207Z Can Seam Micrometer Micrometers Can Seam Micrometer, Snub Nose, Range 0 to 0. 75 In. mm, Resolutions 0. 01 In. mm, Friction Thimble, Rounded Anvil, Flat Spindle, Stainless Steel, Includes Soft CaseCan Seam MicrometersFriction thimble and rounded anvil. Include soft case. 1245722-12
|
|
|
Vintage L S Starrett Digital Depth Gauge Micrometer No 446 A Athol Original Case
Great vintage tool. Original Case. Tool is in very good condition with just some age& handling wear. Click to View My Other Auctions Buy more than one lot and I will combine shipping charges. NY residents add 7% sales tax. Items shipped within 48 hours of receipt of payment(excluding Sundays. Bid with confidence. Ebay seller for over 13 years with 1000s of satisfied customers. Satisfaction guaranteed. Powered by
|
|
|
MACHINIST TOOL LATHE Brown & Sharpe Micrometer with Carbide Tips in Box Case
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.LL 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-1402cbec3c7-0x108-
|
|
|
STARRETT # 486 3" - 4" blade outside micrometer .001 resolution
Offered for your bid or"Buy it Now" Used. But near mint STARRETT Model No. 486 3" 4" blade outside micrometer. Wood case included. Please review photos for previous owners etchings. Great Item! Great Deal!
|
|
|
Starrett No 436 RL 1" Micrometer with Ratchet stop and Lock nut with Box
Starrett No 436 RL 1" Micrometer with Ratchet stop and Lock nut with Original Box. My grandfather has some machine tools he would like for me to sell here on Ebay. Honestly have no clue what they are used for but I promised to list them for him. Please email if you have any further questions or would like additional pictures. Thanks
|
|
|
Micrometer Alignment Assembly (1588)
Micrometer Alignment Assembly Flat rate shipping in the continental US No international shipping please. Please see my other auctions
|
|
|
Oriel / Newport 16121 Precision Linear Translation Stage, Micrometer, 1" Range
Oriel(now Newport) precision linear translation stage. Model 16121, in very good condition. Tight, smooth movement, strong spring action. The stage itself has a 1" travel range. Ratcheting Mitutoyo micrometer is included. Payments. Shipping, and Returns: We allow a 14-day right of inspection. Any r eturn shipping must be by traceable and insured means. Buyer will be responsible for all shipping costs. Items are typically shipped within 1-3 business days following a cleared payment. We minimize buyer's cost by re-using shipping supplies and selecting the lowest rate service available. Buyer may request alternative shipping services. Including overnight delivery when available. Multiple items will be automatically combined into a single shipment when possible. Pennsylvania residents pay sales tax. International buyers are welcome. ... moreAll international payments must be made through PayPal. International buyers are solely responsible for import duties and/or brokerage fees. We offer low-cost shipping by USPS Priority Mail International when available. Please note that typical international delivery takes 2-4 weeks and there have been occasional delays of over 8 weeks. We are not responsible for shipment delays due to circumstances outside our control. If your purchase is time-critical. Please select UPS Worldwide service or contact us for other available options.
|
|
|
Chuan outside micrometer, in case 1 to 2 inch in excellent used condition
Chuan brand outside micrometer 1 to 2 inch in excellent used condition with case. As shown
|
|
|
MITUTOYO 0-1" ELECTRONIC DIGITAL POINT MICROMETER .00005" *SUPERB*
MITUTOYO DIGITAL POINT MICROMETER#342-711-30 0-1" RANGE ACCURACY TO.00005" 50 MILLIONTHS INCLUDES ZERO/ABS. INCH/METRIC AND STORAGE CASE NEW BATTERY INSTALLED SUPERB CONDITION $12.50 S&H
|
|
|
STARRETT 1-1/2" to 2-1/2" BLADE MICROMETER WITH STORAGE CASE *SUPERB*
STARRETT BLADE MICROMETER#486 1-1/2" to 2-1/2" WITH STORAGE CASE SUPERB CONDITION $12.50 S&H.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-1402e34b03e-0x105-
|
|
|
Starrett 2-3" And Central Tool 3-4" Micrometer Set
Starrett 2-3" micrometer and 3"4" Central Tool Co out of RI. Steel contacts. Ratchet thimble. In good working order. I no longer need these for my job. Posted with
|
|
|
12 PC BROWN & SHARPE CARBIDE METRIC MICROMETER SET IN WOODEN BOX, SIZE 0-300
BROWN& SHARPE 12 PC METRIC MICROMETER SET CARBIDE TIPS COMES WITH WOODEN STORAGE BOX WRENCHES INCLUDED 12 PC SET. 0-300MM, EACH SIZE GOES UP 25MM, NEW CONDITION. PLEASE CALL KEN WITH QUESTIONS. WE ARE A FULL LINE MACHINE TOOL DISTRIBUTOR. 800-756-7283#5499 40# BUY MORE THEN ONE ITEM AND SAVE ON SHIPPING CHARGES! WE SELL AND SHIP INTERNATIONALLY! PLEASE PAY WITH PAYPAL FOR FAST SHIPPING! WE DO NOT ACCEPT PERSONAL/BUSINESS CHECKS AS PAYMENT. WE SHIP OUR ITEMS VIA UPS GROUND. WE WILL LEAVE POSITIVE FEEDBACK UPON RECEIPT OF PAYMENT. WE JUST ASK THAT YOU DO THE SAME FOR US. THANK YOU! GOOD LUCK BIDDING! We stand behind all the products that we sell. If you are not satisfied with the item you have purchased. Please contact us BEFORE you leave feedback so we can work it out. If you post negative feedback before you contact us. The item is yours ... moreto keep. Thank you. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Mitutoyo 129-109 Vernier Depth Gauge Micrometer 0-50mm Range 1 rod
Mitutoyo 129-109 Vernier Depth Gauge. Interchangeable Rods, Micrometer Type, 0-50mm Range, 0.001mm Graduation Posted with
|
|
|
Vintage Brown & Sharpe 0-1" Micrometer, Caliper in the Box, #1011, Made in USA
Micrometer is in perfect working condition; box has seen a better day. Taped up w/ cracks and chips in the plastic. Please email any questions.
|
|
|
11 to 12 inch Scherr Tumico Micrometer reads too .0001
This is a 11 to 12 inch Scherr Tumico Micrometer manufactured in Minnesota.USA. They are a specialty micrometer mfg and produce top quality micrometers.This is a used item taken directly from a shops inspection equipment. Some nicks and ticks from use but the thimble turns easily. Ratchet ends works and reads to.0001. Micrometer features friction thimble and a convenient lever lock. Forged steel frame has reinforcement ribbings and black wrinkle finish. Silver mist chrome finish head has black graduations for easy reading to.0001" Friction thimble Convenient lever lock Reading to.0001" Carbide spindle and anvil faces Drop forged steel frame with reinforcement ribbing Durable black wrinkle finish frame Spindle hardened to Rc 62 with lead error held to.00005" Silver mist chrome finish head Black lines and numbers for easy reading. ... moreOn Jul-23-13 at 06:07:24 PDT. Seller added the following information: I'm not sure about the shipping costs which is why i put $15. If the shipping costs are less I would adjust. I'm not looking to make a profit on shipping costs. Just want to cover my cost of shipping the item.
|
|
|
STARRETT 222 SPECIAL OUTSIDE MICROMETER 6" - 7" -NEW
STARRETT 222 SPECIAL OUTSIDE MICROMETER 6" 7" Gently used. There is a small amount of surface rust as shown in picture Approx 14.5" Throat Depth We are a surplus warehouse and have many great parts for great prices. We are honest and as accurate as possible. Please reference photos and email any questions. International buyers subject to international shipping fees. TS062913FR-mm10 BALT
|
|
|
Micrometer Starrett No 436 3 - 4" Carbide Outside Micrometers Good Condtion
Starrett 3-4 inch with tenths on sleeve Anvil and spinal are in good working condition Has been Calibrated No Ratchet stop or Lock Nut Questions please send message
|
|
|
Brown & sharp Outside Micrometer 10 in to 11 in Starrett Very Nice condition
Brown& sharp 10-11" micrometer in terrific shape looks hardly used and well taken care of. Posted with
|
|
|
Machinists (13F) Chuan Perfect 0-3 Micrometer Set
See Pics Matched Set.0001 You Will Never Find Better Little If Any Use Certified 7-1812. PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you ... moreon shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of
|
|
|
ESTATE RARE MACHINIST INSPECTION MITUTOYO JAPAN 0-1" .001 MICROMETER EXCELLENT
NOW ACCEPTING CREDIT CARDS! WE DO NOT ACCEPT PAYPAL! our DIRECT MERCHANT ACCT IS FINALLY SET UP AND WORKING! YOU CAN PAY FOR THIS AUCTION WITH ANY MAJOR CREDIT or debit CARD! A LINK WILL BE SENT TO YOU BY EBAY AT CHECKOUT. AND IS FULLY APPROVED BY EBAY AND YES YOU ARE COVERED 100% BY EBAY BUYER PROTECTION! THIS AND PAYMENT OPTIONS UPON PICKUP ARE THE ONLY PAYMENT METHODS THAT WE ACCEPT! YOU MUST BE IN THE USA TO BID ON THIS ITEM! THE PICTURES TELL 1000 WORDS. YOU ARE BIDDING ON THE ESTATE RARE MACHINIST INSPECTION MITUTOYO JAPAN 0-1" 001 MICROMETER IN EXCELLENT WORKING CONDITION, IT COMES WITH EVERYTHING YOU SEE IN THE PICTURES IN THE HARD PLASTIC CASE! A GREAT FIND! YOU WILL RECEIVE EXACTLY WHAT YOU SEE IN THE PICTURES YOU WILL RECEIVE EXACTLY WHAT YOU SEE IN THE PICTURES.THIS IS A VERY RARE FIND! PLEASE LOOK AT MY OTHER AUCTIONS FOR ... moreMORE GREAT VINTAGE ITEMS IN THE NEXT FEW DAYS SO KEEP CHECKING MY AUCTIONS. WE HAVE BEEN ON EBAY NOW FOR OVER 1 YEAR AND IN THE ANTIQUE BUSINESS. FOR OVER 30 YEARS, DUE TO THE ECONOMY WE HAVE CLOSED OUR STORE AND DECIDED TO SELL ONLINE, WE WILL HAVE A LOT MORE ITEMS IN THE FUTURE, WE OFFER A 100% SATISFACTION GUARANTEE THAT IF AN ITEM ISNT DESCRIBED THE WAY WE SAY IT IS JUST RETURN IT FOR A FULL REFUND NO QUESTIONS ASKED! PLEASE IF YOU ARE SATISFIED LEAVE POSSITIVE FEEDBACK, AND FEEDBACK WILL CERTAINLY BE LEFT FOR YOU! THANKS FOR LOOKING AT OUR AUCTIONS AND GOD BLESS
|
|
|
micrometer set 1" thru 4" SCHERR-TUMICO .0001 graduations, excellent condition
SET OF FOUR SCHERR-TUMICO MICROMETERS. 1" THRU 4" SATIN CHROME FINISH, 0001 GRADUATIONS, FRICTION THIMBLE, LOCK RING, NOT CARBIDE TIPS. NO BOXES OR STANDARDS, THEY ARE ALL IN EXCELLANT CONDITION, VERY LITTLE OR NO USE, NO INTIALS OR SCRATCHES, FRAMES LOOK VERY GOOD.
|
|
|
STARRETT MICROMETER STANDARDS 0-12 INCH SET IN WOOD CASE
VERY NICE STARRETT 234 END ROD SET 0-12 INCHES IN CASE AS SHOWN IN PICTURE. PLEASE LOOK AT MY OTHER AUCTIONS FOR MORE MACHINIST TOOLS
|
|
|
OFFER & WIN- UE72PP Motor with Micrometer Screw
OFFER& WIN WE GUARANTEE THE LOWEST PRICES If You Find This Item At Lower Prices Than Ours, We Promise To Sell It Cheaper Than That Which You Have Found. ITEM FOR SALE: UE72PP Motor with Micrometer Screw USED Normal 0 21 false false false PL X-NONE X-NONE MicrosoftInternetExplorer4 You have 7 days booting warranty from time you receive the device to check if it is fully functional. PLEASE DO NOT ASK US TO LOW-DOWN THE VALUE OF THE INVOICE, IT IS AGAINST OUR POLICY. IMPORTANT! PLEASE OPEN PACKAGE IN THE PRESENCE OF THE CARRIER/TRANSPORTER TO MAKE SURE THAT THE ITEM IS OK AND IS NOT CRUSHED. OTHER WAY WE WILL NOT PAY FOR ANY DAMAGES. If the device does not work please inform us about it. There is always a positive way of finishing the transaction before you leave a negative or neutral feedback. Please be assured that when You buy more than ... moreone item they might not look the same as the one in the picture SHIPMENT All items will be shipped by UPS courier. Costs: Items to North America will be shipped by registered priority airmail: 100 $ Customers from Europe. South and Middle America, Asia, Africa, Australia and Oceania: Please send me Your zip code so I could tell You the price of the shipment. If you have any questions. Please write or call. Contact with me: Mobile: +48 880 858 387 Phone: +48 15 842 36 35 Fax: +48 15 642 76 98 E-mail: mt.agat@gmail.com
|
|
|
Vintage micrometer eyepiece 6x / w.scale microscope ZEISS LEITZ
Vintage micrometer eyepiece 6x/ w.scale microscope ZEISS LEITZ
|
|
|
Ball Bearing Mechanical Microscope Stage With L.S.Starrett Co. No. 63 Micrometer
Ball Bearing Mechanical Microscope Stage With L.S.Starrett Co. No. 63 Micrometer Accepts a 100mm glass plate(not included) Bidders outside the U.S. expect higher shipping rates. All Sales Final 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14030546ad0-0xfe-
|
|
|
Mitutoyo 0-4" Depth Micrometer Set~Very Clean 129-127
Very clean. Looks like new. 2.5" base I Only Accept Paypal. Please do not hesitate to ask questions prior to buying. Micrometers and other machinist tools may need calibrating. I realize the importance of accurately and honestly describing items. So buy with confidence. Shipping is only to the lower 48 states. Returns-Refund will be issued when item is returned and inspected. Return Shipping should be packed like it was received. Buyer pays return shipping.So please inspect each picture and ask any questions) I will respond within 1-2 days. Item should be received between 3-12 days of cleared payment. Payment is due within 2-3 days. If you have a problem with item. Let me know prior to leaving negative feedback. I am human. But try to keep mistakes to a minimum. I will try to make my customers happy. A little bit about me. I love to ... moretrade on items that interest me and display them on eBay. It's a great way for me to make some side money. I do work a regular 40 hour week so this is a part time thing. I'm probably not waiting in front of the computer to answer questions, but I will check messages every morning and evening. I have been handling packages in less than 1 day so I ship really fast. I will probably have your package ready same day with postage paid. Ready to go out to post office next business day. I do use the most cost effective way of shipping. If I put standard shipping on items, it may be sent off first class or parcel select. Larger items will usually go priority since parcel select is way to high now. Thanks for looking and do not forget to check out my Ebay store. Posted with 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14031968fd9-0xec-
|
|
|
Central Tool Micrometer 0-4" .001 Graduation
I put used. But I do not believe it has been worked with. Friction thimble with lock. The case has hole in it from grinder. I Only Accept Paypal. Please do not hesitate to ask questions prior to buying. Micrometers and other machinist tools may need calibrating. I realize the importance of accurately and honestly describing items. So buy with confidence. Shipping is only to the lower 48 states. Returns-Refund will be issued when item is returned and inspected. Return Shipping should be packed like it was received. Buyer pays return shipping.So please inspect each picture and ask any questions) I will respond within 1-2 days. Item should be received between 3-12 days of cleared payment. Payment is due within 2-3 days. If you have a problem with item. Let me know prior to leaving negative feedback. I am human. But try to keep mistakes to a ... moreminimum. I will try to make my customers happy. A little bit about me. I love to trade on items that interest me and display them on eBay. It's a great way for me to make some side money. I do work a regular 40 hour week so this is a part time thing. I'm probably not waiting in front of the computer to answer questions, but I will check messages every morning and evening. I have been handling packages in less than 1 day so I ship really fast. I will probably have your package ready same day with postage paid. Ready to go out to post office next business day. I do use the most cost effective way of shipping. If I put standard shipping on items, it may be sent off first class or parcel select. Larger items will usually go priority since parcel select is way to high now. Thanks for looking and do not forget to check out my Ebay store. Posted with
|
|
|
Starrett Micrometer Model 436RL-2 Slightly Used
This Starret micrometer is still in it original packaging. it comes with conversion chart. Instructions, a key for setting the instrument, and calibration card. There are very minimal scuff or scrapes. Item appears to be slightly used to almost new.
|
|
|
micrometer, 0-4" with Standards.. Central tool company, machinist . star
This is a lightly used set of micrometers in excellent condition. It ranges from 0-4" and has a 1" 2" and 3" standard. thimble is very smooth. I am a journeyman machinist and I see no problems with this tool. would be great for an apprentice or the home machinist Posted with
|
|
|
Vintage Antique Brown & Sharpe 2-3 Micrometer with box, manual
Vintage Brown& Sharpe 2-3 Micrometer with box. Manual, additional parts Includes everything in the pictures
|
|
|
MACHINIST TOOLS DEPTH MICROMETER WIGGLER CENTER FINDER
MACHINIST TOOLS DEPTH MICROMETER WIGGLER CENTER FINDER Description. 1- 2" Depth Micrometers Wiggler Center Finder All Used I have over 2.600 POSITIVE FEEDBACKS FROM HAPPY BUYERS! Please view all photos for condition before making your final buying decision. THANKS AND HAVE FUN. GOOD LUCK! Shipping to U.S. only Paypal Only Shipped Priority Mail. U.S. Priority Mail is fast, safe and trackable. Your Item will be carefully packed and shipped ASAP!
|
|
|
Starrett 124-B Inside Micrometer Set, Range 2"- 12.5" w/ 1/2" Spacer, 6" Handle
Starrett 124-B Inside Micrometer Set. Range 2" 12.5" w/ 1/2" Spacer, 6" Handle, 10 meas rods. Head is satin chrome. OA exc cond. Replacement cost about $200. I accept bids ONLY FROM U.S.A. 50 states. If you have a NON-U.S. Paypal account& a U.S. address, I WILL NOT ACCEPT YOUR BID& your Paypal payment will be blocked. PA residents of(Allegheny County) Phila County must add(7% 8% sales tax. All other counties in PA must add 6% sales tax. Buyer pays 16.75 for packing, handling, shipping for U.S. 50 state delivery. APO, FPO& others higher. I ship every Wed weather permitting.
|
|
|
0-1" Mitutoyo Outside Micrometer, Reads .0001 (tenths)
Mitutoyo 0-1" Micrometer#103-260. Carbide Tipped. Its repeatability is within.0001(Tenths) and in very good condition. Ready to be used in any precision machine shop. Contains original box. Manual, wrenches, and measuring ball.
|
|
|
New Focus 9064 X Axis Translation Stage with 9353 Starrett Micrometer Optical
New Focus(now sold by Newport) 9064 X Axis Translation stage 0.5" Travel. Will fit the EZ track system Includes a 9353 Starrett micrometer Some light wear on top but it's just cosmetic. Used. But in excellent condition.
|
|