In 
 
Order by: 
Available to: 
Price: 
 - 
$
72.00
Buy It Now
Free Shipping
Condition: New
Location: Spring Hill, United States
Cross feed nut for a 12” Logan lathe.
$
34.95
Buy It Now
$4.50 Shipping
Condition: New
Location: Cross Plains, United States
This will work on several lathes. The below video is a demonstration showing the use of a simple carriage stop with a dial indicator. This makes it easy ... moreto "know" when you are about to see the correct "0" point to stop the carriage feeding.It was very easy to stop within 0.005 - 0.010" of a position.This allows you to "manually" advance the carriage to finish the cut if desired.This indicator works very good.Also, you can set tension on the indicator/stop clamp so if an overrun occurs the indicator stop will simply slide.
$
20.00
Buy It Now
$4.75 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
59.00
Buy It Now
$17.00 Shipping
Condition: Used
Location: Bradenton, United States
Very Nice- Original countershaft assembly for a 10" Logan Model 200 horizontal drive lathe. Motor mounting base is stamped with Logan part number ... moreLA-303. Hanger is stamped with Logan part number LA-302-1. Pulleys run straight and true. Retains original paint. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
40.00
Buy It Now
$5.30 Shipping
Condition: Used
Location: Lakeside, United States
LOGAN 10" LATHE MODEL 200 Logan lathe guard door with threading pattern guide with hinge with knob Comes as shown. Good working condition GENTLY ... moreREMOVED. DO NOT BE SHY MAKE ME AN OFFER. IF YOU NEED IT WE WANT TO SELL IT TO YOU, WE WILL NOT BICKER OVER A FEW BUCKS. YOU WILL SAVE $$ WITH ME. YOU NEED IT. WHAT ARE YOU WAITING FOR? JOHN 4:8
$
35.00
Buy It Now
$21.41 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
89.99
Buy It Now
$10.25 Shipping
Condition: New
Location: Niles, United States
1 1/2-8 MOUNT FOR MANY OF THE ATLAS, CRAFTSMAN, LOGAN AND SOUTH BEND MODELS. IT WILL FIT MOST OF THE ATLAS AND LOGAN MODELS WITH NO MODIFICATION.
$
125.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
12.46
Buy It Now
$4.70 Shipping
Condition: New
Location: Ionia, United States
These wipers cross reference to the original Logan part number LP-1692 and are produced to OEM specifications. O ld part numbers LA-290A, L-1781, LA-293 ... moreor LA-294. Wipers are sold in sets of 4 and are very reasonably priced parts so don’t miss out on a chance to pick up a set for your lathe.
$
65.00
Buy It Now
$4.75 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
38.00
Buy It Now
$4.75 Shipping
Condition: New
Location: Berrien Springs, United States
$
45.00
Buy It Now
$8.95 Shipping
Condition: New – Open box
Location: East Greenwich, United States
20 tool bits 5/16"X 5/16"X 2-1/2" lathe cutters 9-Rex aa, 8-Rex aaa, 3-India, atlas logan south bend. Never used. CLEAN AND VERY GOOD CONDITION.
$
85.00
Buy It Now
$9.45 Shipping
Condition: New
Location: Berrien Springs, United States
Atlas 10- 12" Lathe Split Nuts. Guide, Spring, Ball with mounting hardware 10F-12X 3/4" Lead Screw- Craftsman 101.07403 This listing is for ... morea set of Atlas 10- 12" Lathe Split Nuts. Guide, Spring, Ball with mounting hardware 10F-12X as shown in the photos. In good condition. These work with a 3/4" Lead Screw. This was ordered new from Clausing in 2001 and it looks like the lathe was hardly used after being refurbished. The scroll and lever are listed separately. These parts came off of a 101.07403 Craftsman lathe that was the cleanest lathe I have ever bought. I got the history with it and it showed lots of purchases of parts to make this lathe issue-free. Check my other listings under! I am happy to combine shipping to save you money-just put your items in to the eBay"cart" and then buy them all at once and let me invoice you with correct shipping before you pay. If that is too complicated. Just buy and I will refund shipping but that costs me more in eBay fees. $3.95 Flat Rate SHIPPING anywhere in the lower 48 States. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!
$
60.00
Buy It Now
$9.45 Shipping
Condition: New
Location: Berrien Springs, United States
Clausing Lathe Cross Feed Nut. Slide Nut, Feed Screw.
$
29.99
Buy It Now
$5.65 Shipping
Condition: Used
Location: Nashville, United States
As shown, in good used condition, from an unknown model number Logan 11".
$
50.00
Buy It Now
$4.75 Shipping
Condition: New
Location: Berrien Springs, United States
Grizzly 804. Slide Nut, Feed Screw. Crossfeed Nut for the Asian 9x20 and 9x18 lathes. Made from 360 Brass. Chiuting 3004.
$
32.99
Buy It Now
Free Shipping
Condition: New
Location: Dayton, United States
This item is one 2MT Crotch Center. Nothing else included. This item is one Crotch Center. Made by Dave from YouTube's Crafted Channel. I own many Atlas ... morelathes on which to test my parts. I have run plastic parts including my ABS gears and change gear bushings for over 4 years making big cuts.
$
70.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
75.00
Buy It Now
$13.85 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
550.00
Buy It Now
$76.26 Shipping
Condition: Used
Location: La Verne, United States
20" Lathe Steady Rest - South Bend Monarch Logan Clausing Atlas Regal Leblond. I don’t know brand lathe this goes to. Make sure to check the measurements ... morebefore you purchase. It looks to be in good condition. But it could probably use a little cleaning up and maybe some new bearings.See pictures for further detailsFeel free to ask any questions and I’ll do my best to answer themUS shipping or local pick up
$
30.00
Buy It Now
$4.75 Shipping
Condition: New
Location: Berrien Springs, United States
$
90.00
Buy It Now
$24.40 Shipping
Condition: Used
Location: Chicago, United States
Logan Cast Iron Bed supports (2). Bottom 9" wide - holes 1/2" - 7 3/4" apart. Top 6 3/4" x 5 1/8" - holes 3/8" & 3 1/8 x 4 " apart.
$
12.00
Buy It Now
$4.75 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
72.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
99.95
Buy It Now
$21.52 Shipping
Condition: Used
Location: Youngstown, United States
$
15.00
Buy It Now
$4.75 Shipping
Condition: Used
Location: North Tonawanda, United States
LOGAN 10" LATHE Saddle Wipers with felt and screws Just the three that you see Good used condition GENTLY REMOVED. DO NOT BE SHY MAKE ME AN OFFER. ... moreIF YOU NEED IT WE WANT TO SELL IT TO YOU, WE WILL NOT BICKER OVER A FEW BUCKS. YOU WILL SAVE $$ WITH ME. YOU NEED IT WHAT ARE YOU WAITING FOR? JOHN 4:8
$
45.99
Buy It Now
$22.32 Shipping
Condition: Used
Location: Ashby, United States
Logan 9B Lathe Headstock End Side Gear Cover Guard. Shipping lower 48 states only . No cracks or breaks.
$
36.00
Buy It Now
$5.50 Shipping
Condition: Used
Location: Dearborn Heights, United States
This part was removed from an old Logan 11" lathe Model 1922. If you are interested, you can look at them. This lock looks like it's in good, usable condition. ... moreYou can see this in the photos. We will send a new invoice each evening.
$
1620.00
Buy It Now
$380.00 Shipping
Condition: Used
Location: Woodbridge, United States
Untitled Document Free. Fast Shipping Every Business Day! Logan 11-inch Logan Lathe Parts List Click for Our Complete Catalog Manual Description: Number ... moreof Pages: 16. This is a reproduction. Not a photocopy, of an original Logan 11-inch Lathe Parts List. This manual contains complete parts list and exploded views of the lathe. This is a very good manual that covers everything stated below in the contents. Contents: Headstock Assembly.1. Shifter Rack Assembly.2. Gear Guard Assembly.3. Reverse Gear Assembly.4. Change Gear Assembly.5. Compound Rest Assembly.6. Saddle Assembly.7. Worm& Clutch Assembly.8. Automatic Apron Assembly.9. Gear Box Assembly.10. Dial Indicator Assembly.11. Tailstock Assembly.12. Bed Assembly.13. Drive Box Assembly.14. Bench Stand& Guard Assembly.15. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper t
$
70.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
395.00
Buy It Now
$59.83 Shipping
Condition: Used
Location: La Verne, United States
15" Lathe Steady Rest - South Bend Monarch Logan Clausing Atlas Regal Leblond. I don’t know brand lathe this goes to. Make sure to check the measurements ... morebefore you purchase. It looks to be in good condition.See pictures for further detailsFeel free to ask any questions and I’ll do my best to answer themUS shipping or local pick up
$
20.00
Buy It Now
$5.30 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
39.99
Buy It Now
$27.86 Shipping
Condition: Used
Location: Lakeside, United States
$
275.00
Buy It Now
Condition: Used
Location: Newark, United States
Carriage stop only has two of the long adjustable screws. LOCAL PICKUP IN NEWARK DELAWARE ONLY.
$
325.00
Buy It Now
$18.50 Shipping
Condition: Used
Location: Bloomfield, United States
10" Logan lathe headstock cone pulley & pinion spindle assembly as pictured. Bull gear has 72 teeth with 1 1/4" bore diameter. There are no chipped or ... morebroken teeth on any of the gears. This came from a working Model 200 Logan lathe. Cone pulley #LA-118-2-A. Bull gear #LA-120-2-A. Spindle gear #LA-119-1.
$
4.98
Buy It Now
$4.70 Shipping
Condition: New
Location: Ionia, United States
These would be exactly what you would get if you ordered direct from Logan. These wipers cross reference to the original Logan part number LP-1692 and ... moreare. Wipers are sold in sets of 4 and are very reasonably priced parts so don’t miss out on a chance to pick up a set for your lathe.
$
375.00
Buy It Now
Free Shipping
Condition: Used
Location: Waterford, United States
USED, STEADY REST ASSEMBLY. NO CRACKS OR REPAIRS. THE NUT IS MISSING FOR THE STEADY REST CLAMP. LOOK AT THE PICTURES. NO EXCEPTIONS; NO MATTER HOW CLOSE ... moreYOU THINK YOU LIVE TO MY LOCATION.
$
74.00
Buy It Now
$5.25 Shipping
Condition: New
Location: Ionia, United States
Teeth are 16DP. Gear Face Width =. 4375" (7/16").
$
19.95
Buy It Now
$5.95 Shipping
Condition: Used
Location: Danville, United States
In good order, as shown.
$
125.00
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan LatheThe backlash is pretty bad but it’s in the nut and there a sellers on ebay making reproductions
$
199.99
Buy It Now
$18.00 Shipping
Condition: New
Location: Niles, United States
NEW USA MADE SOUTH BEND AND LOGAN LATHE 3C COLLET ADAPTER AND HANDWHEEL/DRAWTUBE SET. NO COLLETS INCLUDED.
$
89.95
Buy It Now
Free Shipping
Condition: New
Location: Solon, United States
4' length of adjustable length V belt fits Logan lathe and others that use B width belts. The best part about this is that no disassembly of headstock ... moreis required to install this belt and belt has anti vibration qualities. I have used this on my machine for 10+ years now with no problems. Saves a lot of time by not having to tear apart headstock to replace belt. Free 2 day priority mail included. 
$
7.00
Buy It Now
$4.75 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
45.00
Buy It Now
$8.00 Shipping
Condition: Used
Location: Lakeside, United States
Gear has 30 teeth. Thickness.570".
$
99.99
Buy It Now
$16.52 Shipping
Condition: Used
Location: Nashville, United States
Removed from a Logan 11" lathe. Good gear. Comes as shown. I Do Not Ship To Canada!
$
19.99
Buy It Now
$8.75 Shipping
Condition: Used
Location: Waterford, United States
USED,CHIPPED, LOGAN CHANGE GEAR. THE BORE IS 5/8 AND THE GEAR IS 7/16 THICK. LOOK AT THE PICTURES. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE ... moreTO MY LOCATION.
$
99.00
Buy It Now
$22.74 Shipping
Condition: Used
Location: Lakeside, United States
Side end gear cover for a 10" Logan lath Model 200.
$
49.99
Buy It Now
$8.30 Shipping
Condition: Used
Location: Lakeside, United States
Excellent Condition- Original Logan 16 tooth stud change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" ... morethick. Teeth are all in very fine order. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
22.50
Buy It Now
$9.10 Shipping
Condition: Used
Location: Coppell, United States
No.30L Parting Cutoff Toolholder. Suzuki Tokyo Angled Parting Tool Toolholder, No. 30-L. PARTING TOOL HOLDER. 3/32" parting tool included.
$
14.99
3d 14h 43m 41s
0 bids
Condition: Used
Location: Hatboro, United States
$
90.00
Buy It Now
Free Shipping
Condition: Used
Location: Sandy Hook, United States
VERY NICE ORIGINAL LOGAN 10" LATHE LANTERN ROCKER TOOL POST HOLDER. Sold as is please look at photos and email me if you have any questions thank you
$
8.00
Buy It Now
$4.75 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
10.90
Buy It Now
$4.50 Shipping
Condition: New
Location: Cross Plains, United States
Will not mark or Gaul spindle threads.
$
30.00
Buy It Now
$4.75 Shipping
Condition: New
Location: Berrien Springs, United States
Atlas & Craftsman Part Number 537-040. Fits Craftsman models: 101.27580, 10127590, 101.28930, 101.28940, 101.28950, 101.28970, 101.28900, 101.28990 & ... more101.28910. Fits Atlas models: 3980, 3981, 3982, 3983, 3985, 3986, 3990 & 3991.
$
25.00
Buy It Now
$4.75 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
15.00
Buy It Now
$4.75 Shipping
Condition: Used
Location: North Tonawanda, United States
Logan Lathe
$
100.00
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Yorktown, United States
$
12.00
Buy It Now
Free Shipping
Condition: Used
Location: Huntington Beach, United States
Unbranded LATHE HEX CHUCK KEY.
$
48.99
Buy It Now
Condition: Used
Location: Spring Grove, United States
LATHE CHUCK 4-3/4” (4) HOLE BACKING PLATE 1 1/2-8 MOUNT ATLAS CRAFTSMAN LOGAN~More pictures/measurements available upon request~Condition is Used Shipping ... morevia USPS Priority Mail Please before giving be negative or neutral feedback, give me the opportunity to try to make the situation right. International Buyers – Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. *** more pictures available upon request.***
$
1.00
Buy It Now
Free Shipping
Condition: New
Location: Lake Villa, United States
Our machinery consists of the following: Warner & Swasey Turret Lathes, Bridgeport Milling, Cincinnati OD Grinding between centers. Brown and Sharpe Horizontal ... moreMilling, Boyar Shultz surface grinding, Tapping machinery, Drilling machinery ect….
1 2 3 4 5 6 7 8 9 10 11 12 13 14
 In 

Former Listings  
 
Follower Rest for 9" Logan Lathe
Excellent Follower Rest#AC-285 for 9" Logan Lathe Very minor jaw wear. 3" capacity. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Logan Lathe Chuck Backing Plate 5 3/4" OD 2 1/4"-8 Thread
This auction is Logan Lathe Chuck Backing Plate 5 3/4" OD 2 1/4"8 Thread in good condition. PLEASE SEE OUR OTHER AUCTIONS* We will provide an eBay invoice once the auction has ended and we have packaged your item. The shipping costs will be based on your zip code or country of record. Please do not send payment until you have received our invoice. We ship via the US Postal Service We reserve the right to relist the item if Ebay goes down within two hours of the end of the auction. Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
Logan Lathe Saddle Way Wipes
This auction is Logan Lathe Saddle Way Wipes in good condition. PLEASE SEE OUR OTHER AUCTIONS* We will provide an eBay invoice once the auction has ended and we have packaged your item. The shipping costs will be based on your zip code or country of record. Please do not send payment until you have received our invoice. We ship via the US Postal Service We reserve the right to relist the item if Ebay goes down within two hours of the end of the auction. Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
LOGAN LATHE CAST IRON LEGS + CHIP PAN STEAMPUNK
LOGAN LATHE CAST IRON LEGS + CHIP PAN STEAMPUNK, LOGAN LATHE CAST IRON LEGS NO CRACKS OR WELDS. CHIP PAN 16-1/4" X 54" CAN SHIP UPS. PLEASE CHECK OUR OTHER AUCTIONS FOR MORE LOGAN LATHE PARTS* QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Enter ZIP Code and click button to see prices: UPS Ground Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13ef4b8c2d3-0xf6-
Logan 830 10" lathe compound assembly
Up for sale is this Logan 830 10" lathe compound assembly. This item has some minor wear. Missing one gib screw and nut on base slide. Smooth operation of screw and slides. I measured the bottom slide dovetail with a hand held caliper. Narrowist width is 1.698. Widest width is 2.012, dovetail depth is.35.
WILLIAMS LATHE CUT OFF & SIDE TOOL holder N-31-R W' BLADE logan south bend atlas
WILLIAMS LATHE CUT OFF& SIDE TOOL HOLDER N-31-R DROP FORGED W' CUT OFF BLADE
VERY NICE ORIGINAL LOGAN 10 MODEL 820 LATHE IDLER CHANGE GEAR BOLT STUD ASSEMBLY
Very Nice- Original Logan change gear stud assembly for a Model 820. Logan 10" lathe. Key is included. Just not shown in the photo. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13ef900c441-0x104-
WILLIAMS, SOUTH BEND LATHE TOOL POST WRENCH 1/2", ATLAS LOGAN
Offered is a Williams 1/2" Combination tool post wrench. In good used condition. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13efac57ff5-0x100-
BUCK AJUST-TRU LATHE 3 JAW CHUCK 1 1/2" x 8 TPI ATLAS CRAFTSMAN LOGAN SOUTH BEND
LOTS OF AUCTIONS ONLINE NOW! Brand Buck Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Includes Reverse Jaws. Buck# 2534 1 1/2" x 8 TPI 5" Dia. 3 Jaw Self Centering 11.12 lbs. Includes Key I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the ... moremachinist and woodworker.
LOGAN LATHE CHUCK AND FACE PLATE 2 1/4" X 8 TPI
LOGAN LATHE FACE PLATE WITH 2 1/8" X 8 TPI BORE SIZE
LOGAN LATHE DRIVE BOX RUBBER BUSHINGS LA-658
Pair of very nice Logan rubber drive box bushings.
LOGAN LATHE 24T MONTGOMERY WARDS 24 TOOTH 9" 10" 11" CHANGE GEAR THREADING
Logan lathe 24t change gear 5/8 bore with keyway
6" Craftsman? 4 jaw independent lathe chuck Atlas? Logan? Delta? So. Bend?
Old Craftsman(I think! 6" 4 jaw, independent, lathe chuck, w/ reversible jaws in good working order. Limited minor rust. 1" by 8 TPI threads. Not sure if intended for wood or metal. Ask questions and check out the photos carefully as I don't offer refunds except when I make a huge error in the listing. Shipping is $9. You will need to specify if you wish insurance. I usually ship w/in two working days after the day payment is made. I'm fine with combining shipping where feasible and recalculating a new combined shipping cost. I greatly prefer payment via Paypal and within two days of auction close. Bid early and often! Please check out my other listings! a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-13f0287a793-0x100-
LOGAN LATHE MODEL 200 AND 210 LEAD SCREW END SUPPORT
THIS IS THE LEAD SCREW END BEARING FOR THE LOGAN MODEL 200 AND 210 10" LATHE IN MINT CONDITION. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
boring mill bridgeport boring head tool bits logan lathe 1/2 x 1/2 x 1 1/2 4 pcs
12E234107 up for sale is a lot of 4 carbide tipped cutting tools. These are 1/2 x 1/2 x around 1 1/2 long, these are great for boring mills bridgeport machines and lathes for boring head and turning tools, 3 in the lot look like the same design and one has a different tip design, all tools look fairly new but we marked these as used as they have some light rust and might need some minor cleaning before use, nice group of tools for many machine shop applications, buyer to pay calculated shipping and packing to your locations, see our store for more stuff like this, thank you RWK. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f04ef138a-0x104-
LOGAN LATHE 10" MODEL TOP COVER LATCH
THIS IS THE TOP COVER LATCH FOR THE 10" AND 11" LOGAN LATHES. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
LOGAN LATHE 10" MODEL COUNTER SHAFT MOUNTS
THIS IS THE TWO CAST MOUNTS TO HOLD THE COUNTER SHAFT TO THE HEAD STOCK ON THE 10" LOGAN LATHES. THE RUBBER GROMMETS ARE THERE BUT ARE WORN A BIT. COMES WITH THE MOUNTING BOLTS. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING! 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13f0522e8c2-0xec-
LOGAN LATHE 10" MODEL LEG FOR COUNTER SHAFT
THIS IS AN ORIGINAL LOGAN LEG TO SUPPORT THE COUNTER SHAFT ON THE 10" AND 11" LATHES. GOOD CONDITION. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
Cross Feed Screw and Nut Assembly for 9" Logan Lathe
Excellent Cross Feed Screw and Nut Assembly for 9B Series Logan Lathe Includes cross feed screw#LB-142. Nut#LB-141, gear#LB-143, bearing#LB-145, large dial#LB-136, hand wheel LB-72 with handle and necessary nuts, felts, screw, etc. All components are in excellent condition, very minor thread or gear wear. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Saddle Lock and Screw for 9" Logan Lathe
Excellent Saddle Lock#LB-152 and Lock Screw# LA-175 for 9B Series Logan Lathe These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13f0522e8ad-0xff-
ARMSTRONG #2B LATHE BORING TOOL HOLDER SOUTH BEND LOGAN HARDINGE ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Armstrong Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Body: 3 1/2" Dia. Fits Bars: 9/16" 15/16" 1 5/16" Bottom Square: 3 1/2" x 2 1/4" x 1/2" I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling ... morefine tools for the machinist and woodworker.
ENCO LATHE TOOL POST SOUTH BEND LOGAN HARDINGE MONARCH CLAUSING ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Enco Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 4 1/2" Square. 1 1/4" Max Bit. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
Tail Stock Drill Chuck for Lathe or Drill ,South Bend,Logan,Atlas,Enco,Craftsman
Excellent Tail Stock Drill Chuck for Lathe or Drill Press Number 8T3 by Supreme Products. Chicago IL. 2 MT arbor by Supreme Products, chuck key by Supreme Products, 1/8" 5/8" capacity, smooth operating. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
(4) LATHE OR MACHINERY CAST IRON LEVELING FEET -SOUTH BEND LOGAN UNISORB
This is a set of(4) heavy duty adjustable cast iron leveling feet for a lathe or any piece of heavy machinery. I can't see a makers name but they're great quality and in good condition. Their size is shown in the pictures. Don't miss these as they include FREE Priority shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon ... morethe item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
READY TOOL Co. LATHE LIVE CENTER #5 MORSE TAPER - LOGAN SOUTH BEND CLAUSING ENCO
This is a READY TOOL COMPANY lathe live center with a#5 morse taper shank. This live center was quality made in the USA(about the best you can get) It has a nice smooth firm(correct) movement and is in great condition with no significant damage or wear to be found apart from some rust staining(see pictures) These live centers are'serviceable' you can dismantle them for service) Please see the pictures for good condition. Ready Tool makes a quality live center. Don't miss it! Remember. It also includes super-fast FREE priority mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ... moreebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positi
Logan # 430 3 Jaw 6" Lathe Chuck Mfg by Buck USA South Bend
Genuine All steel Logan 6" Lathe Chuck Mfg. in USA by Buck Great working condition. Includes both ID and OD Jaw sets. Has handling marks and dings visible in photos. This chuck has the exact same dimenstions as the Buck 6" Adjust Tru chuck and the AT back Plates fit this chuck" This chuck is basically a Buck#3634 without the 4 adjusting set screws. Jaws interchange also. Returns always Happily accepted
LOGAN/POWERMATIC LATHE GEARBOX HOUSING
Here is a LOGAN- POWERMATIC LATHE GEARBOX HOUSING PN LA 1201. Has a good readable thread plate and all bushings.Stripped from a school machine, in storage last 30yrs.Retains most of the original green finish. Shipping flat-rate to the lower 48 is $13 all others must contact seller for actual cost. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13f0ae4ca88-0x104-
LOGAN 11" LATHE MOTOR MOUNT PLATE - IN EXCELLENT CONDITION!!
The following parts came from a LOGAN lathe with a 11" swing and 3' bed. The serial# was 60805(not sure of model number) This lathe was in the middle of restoration and was NOT parted out due to wear! THIS AUCTION IS FOR THE FOLLOWING PARTS: This is the Motor mount plate/ bracket. It's in excellent shape and looks only lightly used. Even has the factory paint. No drill holes or damage at all. If'New' = 10, then this is a solid 9. If you're restoring a Logan you will not find one much nicer! Don't miss it, it includes FREE Priority shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve ... moremy fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you po
Skinner 6" 4 Jaw Lathe Chuck #4806 South Bend, Atlas, Logan, Craftsman 1.5x8tpi
Skinner#4806 6" 4 Jaw Chuck for South Bend 9" 10K Lathe. Should also fit other lathes with a 1-1/2" x 8tpi spindle. Nice condition. Has been disassembled. Cleaned and re-l ubricated. Works smooth as butter. Has a few nicks around the bore. See pictures for details) Please see my other listings for more lathe parts. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
VINTAGE LATHE TELESCOPIC STEADYREST-15" SWING -BIG BORE - LOGAN CLAUSING MONARCH
This is a STEADYREST for vintage a 15" swing lathe. I'm pretty sure it's from an American lathe like a Logan. Monarch or Clausing etc. there are some ID numbers shown in the pics) This Steadyrest is in great shape with no damage or repairs, but the jaw arms have been replaced with Nylon ones so you would have to make some brass ones(very easily done on this rest) This one has a big bore for larger work. The dimensions are shown in the pictures. No bed clamp included I'm afraid. Don't miss this one! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ... moreITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am locate
Sheldon lathe crossfeed screw south bend logan atlas
I'm not positive. But I think this crossfeed screw came off of an older 11 inch Sheldon lathe. The crossfeed nut has a chip broken off of it. Overall length is about 12-3/4" There is some wear on the screw/crossfeed nut. The last photo shows the end of the screw where there is little wear. K128 is stamped on the crossfeed nut.
NOS TRU-AX ADJUSTABLE CENTERING DEVICE ATLAS CRAFTSMAN LOGAN SOUTH BEND LATHE
LOTS OF AUCTIONS ONLINE NOW! Brand C-TEK Packaging In Original Box Condition New Old Stock Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Part# 10104. JT33F x JT33M. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f1180b868-0x103-
C. E. JOHANSSON FORD MACHINIST GAGE BLOCK SET SOUTH BEND LOGAN ATLAS LATHE MILL
LOTS OF AUCTIONS ONLINE NOW! Brand C.E. Johansson Packaging In Original Box Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 4" to 0.1001" I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
FURNAS LATHE DRUM SWITCH ATLAS CRAFTSMAN SOUTH BEND LOGAN ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Furnas Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* In working order when removed. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
3 JAW LATHE CHUCK 4" DIA. 1 1/2" x 8 TPI ATLAS CRAFTSMAN SOUTH BEND LOGAN ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Unknown Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Chuck jaws have been profiled. No key. Threads have some wear but it does screw all the way on. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. ... moref3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f120605eb-0x109-
LOGAN 10" LATHE TAILSTOCK CASTING
LOTS OF AUCTIONS ONLINE NOW! Brand Logan Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
MACHINIST 2/28 NEW MBC MAGNETIC BLOCK + FINE ADJUSTE ATLAS CRAFTSMAN LOGAN LATHE
MACHINIST 2/28 BUY NOW NEW MBC MAGNETIC INDICATOR BLOCK + FINE ADJUSTE I'M LISTING THIS AS USED BUT AS YOU CAN SEE THE PAPER IS STILL STICKING TO THE BOTTOM OF THE MAGNETIC BASE AND OVER ALL LOOKS UNUSED. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is 100% and I aim to keep it that way by WORKING WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK ... moreAND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY OTHER LISTINGS
Heavy Duty Boring Bar and Holder for Lathe,Logan,South Bend,Craftsman,Atlas,Enco
Heavy Duty Shop Built Boring Bar and Holder for Lathe Block is 4 3/8" x 2 11/16" x 1 1/2" thick. Bar is 1" OD and 8 1/8" long with 1/4" tool capacity. T-nut is 1 3/8" bottom width and 15/16" top width and 2 11/16" long. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Pair of MACHINIST "V" BLOCKS for Atlas Craftsman South Bend Logan lathe mill
This listing is for a pair of machinst"V" blocks. They measure 2 X 2 3/4 X 3" Come with one clamp and bolt. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
WILLIAMS STRAIGHT TOOL HOLDER for Atlas Craftsman South Bend Logan lathe
This listing is for a Williams straight tool holder 0-SH. It is 3/8" X 3/4" and holds a 1/4" bit. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
Pair of Drive Pulleys for 9" Logan Lathe
Excellent Pair of 3-Step V-Belt Drive Pulleys for 9B Series Logan Lathe Includes head stock pulley#9C-13-503 with cone gear and brass bushings and countershaft pulley#LB-100 with 3/4" bore. Very minor groove or gear wear. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Head Stock Belleville Washers and Spacer for 9" Logan Lathe
Excellent Head Stock Belleville Washers#LB-16 and Spacer LB-17 for 9B Series Logan Lathe These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Head Stock Spindle, Bearings and Take-up Nut for 9" Logan Lathe
Excellent Head Stock Spindle#LB-9 with Bearings and Take-up Nut for 9B Series Logan Lathe 1 1/2" x 8TPI nose threads. 3MT taper bore, smooth running, New Departure bearings, very minor wear on any part. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
WILLIAMS CUT-OFF TOOL 31-R for Atlas Craftsman South Bend Logan lathe
This listing is for a Williams cut-off tool 31-R. It has been machined to 3/8" X 1 1/4" Comes with cut-off blade. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
#2MT TURRET ATTACHMENT for Atlas Craftsman South Bend Logan lathe tailstock
This listing is for a#2MT turret attachment. It spins nicely. Comes with a 1/2" drill chuck. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f172087bb-0x107-
6" Chuck Back Plate Machined 2 1/4" X 8 TPI South Bend Logan 11" Lathe
6" Chuck Back Plate 2 1/4" X 8 TPI May fit South Bend Heavy 10 or Logan 11" Lathe if they have a 2 1/4 x 8 spindle. Has 4 1/2" holes 3 1/4" center to center. Also has 2 one half holes straight across 5" center to center. Total thickness with hub is 1 1/4" 5/8 hub and 5/8 thick plate. The 4 holes are counterbored for bolt/ allen bolt heads 3/4" diameter x 1/4" deep. Thanks for looking.
Logan 957 11x36 metal lathe with Baldor VFD qc gearbox and tool post plus extras
USA made Logan 957 11x36 metal lathe with Baldor VFD controller and MagneTek Century E-Plus 2HP 3PH motor. Perfect setup with variable speed drive.Nice USA made stuff! Runs off standard 230. Quick change gearbox, power longitudinal and cross feed with automatic apron. Large 1 3/8" spindle bore/ 2 1/4"x8 spindle nose threads. Half-nuts for threading and friction clutch. V-Belt drive. All motor and drive assembly is enclosed in the cabinet. Everything on this lathe is available through Scott Logan@ Logan Actuator Co online. Very cool! Included with the lathe are: Factory Logan taper attachment.Complete(USA) 8" Cushman 4 jaw independent chuck that fits lathe and was the main chuck used with it(USA) 8" Power Companion Tools 4 jaw independent chuck(with smaller backplate for 1 1/2x8 spindles) USA) 6" Shars 2 piece reversible ... more3 jaw scroll chuck BRAND NEW with new backplate ready for threading-Quick change AXA toolpost-6) holder-Set of(6) turning and facing carbide indexible tools(picture shown is older) Set of(3) boring bars-Steady rest-Live center-Logan owners manual with other printed material Everything works fine and is under power so you can fire it up before moving. Lathe is mounted to 2 4x4's and ready for transport onto a low tilt trailer. Easy move when rolled on pipe and pulled with a come-a-long. Serious inquiries only please. Will need to arrange own pickup(I can advise and help with loading) Cash only. No trades or holds. First come first served. Looking to sell fast and have moved ASAP. Local pickup only. Buyer must pick up here in Seattle within a week of end of auction. No shipping so please do not email for quotes. Payment required in full within 3 days of end of auction.
Pair of Bed Supports for 9" Logan Lathe
Excellent Pair of Bed Supports#9C38-504 for 9B17-1. 9B-17-21, 9B-28-1 and 9B-28-21 Logan Lathe No cracks or repairs. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Head Stock Casting for 9" Logan Lathe
Excellent Head Stock Casting#9D48-501 for 9B Series Logan Lathe Includes clamp and bolts. No cracks or repairs. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Change Gear Cover Hinge Assembly for 9" Logan Lathe
Excellent Change Gear Cover Hinge Assembly for 9B Series Logan Lathe Includes bracket#LB-42 and block#LB-43 with pin. Set screw and bolt. No cracks or repairs. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13f1c20bcdf-0xfe-
Head Stock Cover for 9" Logan Lathe
Excellent Head Stock Cover#LB-36 for 9" Logan Lathe Includes hinges and knob. No cracks or repairs. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Change Gear Guard for 9" Logan Lathe
Excellent Change Gear Guard#LB-131 for 9B Series Logan Lathe No cracks or repairs. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Counter Shaft Tower Base for 9" Logan Lathe
Excellent Counter Shaft Bracket Base#LB-97-1 for 9" Logan Lathe Includes roll pins. No cracks or repairs. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Counter Shaft Tower Bracket and Counter Shaft for 9" Logan Lathe
Excellent Counter Shaft Bracket#LB-96 with Bushings and Counter Shaft#LB-102 with Two Collars for 9" Logan Lathe Very minor wear. No cracks or repairs. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
Belt Tensioning Assembly for 9" Logan Lathe
Excellent Belt Tensioning Assembly for 9" Logan Lathe Includes lever#LB-98 with turnbuckle. Bolts and pin. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
MT2 LIVE CENTER TOOL 4 ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE
Live center with MT2 shank. Shank is 3" long. Some light marks noted. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOGAN 10 MODEL 820 LATHE QUICK CHANGE GEARBOX ARM 22 TOOTH SLIDER GEAR LP-1016
Very Nice- Original 22 tooth quick change gearbox gear with key for either the left or right gearbox arm of a Logan 10" Model 820 lathe. Logan part number LP-1016. Outer diameter of 22 tooth gear is 1 1/2" 3/4" interior bore with 1/8" keyway. Key is included as shown. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13f1d25f2e6-0xf3-
NICE LOGAN 10 MODEL 820 LATHE QUICK CHANGE GEARBOX LEFT SHIFT ARM LEVER LP-1340
Very Nice- Original quick change gearbox left shift arm and knob for a 10" Logan Model 820 lathe. Gear is damaged. Value is in the arm and pull knob assembly, which is in fine order. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
VINTAGE LOGAN 200 METAL LATHE CARRIAGE APRON W/ GEARS THREADING DIAL
DESCRIPTION: USED. APRON AND GEARS FOR THE LOGAN 200 LATHE. THE GEARS LOOK OK. NO MISSING TEETH. THE LEAD SCREW HALF NUT HAS WEAR FROM USE. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO ... moreNOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA,
SOUTH BEND ATLAS LOGAN METAL LATHE LARGE COLLET CLOSER BAR 66
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ 23 5/8" long overall overall diameter 1 3/8" diameter unsure what lathe its for for tooling auctions: Lathes may vary in models/years/etc; please be sure you are ... morebidding on the correct item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
DAYTON 1/2 HP Capacitor Start Power Tool LATHE MOTOR Logan Atlas South Bend
Very Good condition Dual Shaft 1725 RPM. 56 Frame 5/8" Diameter 2 1/8" long on one side and 2" long on the pulley side. Great for working a lathe in both directions What you see in the pictures is what is up for auction. I will combine winning auctions to save you $$$ on shipping. I do not overcharge on shipping. You will not be disappointed. Please check the pics Please ask me and I will try and answer any of your questions Please check my other auctions. Bid now because you do not want to miss this deal. Good Luck and check my other auctions. I only charge Actual costs for shipping. Please check my Excellent Rating. Buy with confidence. If you have questions. Please email me. If you have questions. Please email me. High Bidder to pay shipping and insurance if you want it. Please allow time for personal check to clear or send ... moreM.O. for quick shipping. Just a note to all my bidders: I really try to give an accurate description and offer you great items. But, sometimes our interpretation of Excellent or Very Good differ. So, I really suggest you email me with your questions. to make sure we are all on the same page. But, once in a while, someone simply would like a refund. No Problem, I absolutely guarantee my items and you always may have 5 days after you get your item to email me for a refund. But, I want to let you know before you bid, I deduct from your refund: My postage costs The fees the auction page charges me It takes a lot of effort and time to post items.When an item is returned, all that work must be repeated. Sincerely, deducting the actual costs is not meant as a penalty. it actually costs me more. As much as I'd like to be like Wal-Mart, I cannot. With that knowledge, I hope you feel comfortable bidding and winning! May the best bidder win! Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
Globe Dividing Head and Tailstock, Logan Lathe, Benchmaster Mill, Atlas Milling
Globe Dividing Head and Tailstock. Models 409-0& 410-0, This set is near mint. I recently cleaned the cosmoline from the unit. I purchased this unit as NOS in 2001. The dividing plate has 4 rows of detent holes 44,54,56,60. The headstock spindle is MT2. These were an opton for the Globe Milling Attachment made for Logan, Sheldon,other lathes. This set has 3/8" keyways and was mounted on my Benchmaster milling machine. Rare accessory. I ship to USA 50 states only!
EXCELLENT 3AT COLLET SPINDLE SLEEVE FITS ATLAS CRAFTSMAN 10 12 LOGAN 9 10 LATHE
Excellent Condition 3AT headstock spindle protector collet sleeve. Fits an MT3 headstock spinde bore. 3AT collet sleeve for use with Atlas 10" and 12" and Craftsman 12" lathes. Unit is also designed for Logan 9" or 10" lathes. Key is strong. In very fine oder. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
TURRET LATHE SLIDE TOOL 1" SHANK LOGAN HARDINGE WARNER SWASEY
SLIDE TOOL FOR TURRET LATHE OR AUTOMATIC. 1" sHANK AND 2 BORES FOR 1/2" sHANK TOOLS. PLEASE NOT CAST IRON HANDLE WHICH HAS BEEN BROKEN. MOVES FREELY. Please feel free to contact me with any questions. Shipping: Shipping is quoted using USPS Parcel Post for the most economical option for items that do not fit in flat rate boxes. Handling time is 4 days. If for some reason it takes me longer. You will recieve communication explaining any delays. Shipping cost is calculated automatically by Ebay with a handling fee of 1.00 per item to cover expenses such as packaging material. Boxes, etc. Combined shipping is available for your savings! Payment: Payment is expected within 48 hours of auction close. If this is a problem. Please notify me ahead of time. Please view my on eBay. Powered by
LOGAN 10" MODEL 200 LATHE SADDLE CASTING
Nice original Logan 10" lathe saddle casting.Saddle gib and saddle lock screw included. Appears to original paint. Will always combine shipping when possible. Any questions feel free to e-mail. Powered by The free listing tool. List your items fast and easy and manage your active items.
Logan lathe lead screw bushing machinist toolmaker machine parts
Logan lathe lead screw bushing.in good used condition. Normal 0 false false false MicrosoftInternetExplorer4 T hank you for looking at this item.Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when beneficial. Be sure to view all pictures and ask any questions before you bid. I try to be very accurate when giving measurements and descriptions and point out any flaws but have been known to make a mistake on occasion. If your item is not as described or you notice an error in my listing please contact me immediately I will do what ever I can to make it right for both of us. Here at Bill’s Tools& Used Machinery we offer a Money Back guarantee No Questions Asked(well we might ask why but will not refuse returns) customer satisfaction is very important to us All items are ... morepaid via PayPal. If you can not send payment via PayPal, please contact me and we will make other arrangements for payment. IF you want your package insured please let me know before paying. Florida Residents…I must add a 7% Florida sales tax to item purchased by Florida residences Note to International buyers Import duties. Broker fees, taxes and/or customs charges are not included in the shipping price. These charges are the buyer’s responsibility; please check with your country’s customs office to find out what these additional charges might be before bidding or buying. These charges are collected by Delivery Company or when you pick your item up at postal services. I do add a tracking number but it seems items can not be tracked after it leaves the US and items have been known to be held at customs for a couple of days. I ship as soon as payment is received and hope you receive your item quickly, most countries can expect delivery in 10-12 days. However some countries to seem to take longer than others, please contact me if you have not received your item within 30 days. Again Thanks for looking Bill& Betty L-858 di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%
EARLY LOGAN 10&11" LATHE CROSS SLIDE/COMPOUND SWIVEL BOLT LA-181 BEFORE 50844
Nice Logan 10 and 11" lathe swivel lock bolt for machines before serial number 50844. Includes the proper over sized 5/16" nut requiring a 9/16" wrench.
Lantern Tool Post, for 10" Lathe (or larger) South Bend Logan Atlas Craftsman
This lantern-style lathe tool post comes with two(2) rockers(both are JH Williams No. 5) One is smooth on top; the other is not. The bas size is 1-1/2" x 1-1/2" x 3/8' The post is 1" diameter x 3-5/16" high without the screw. The opening in the post itself is 1/2" wide x 2-1/8" long. The screw itself is 2-5/8" long. it has a 7/16" x 7/16" square drive end with 1/2" thread x 1-13/16" long and it turns smooth and free. There are no personal names or any ID inscribed anywhere.
Lathe Wrench, 3/8" Square, South Bend Logan Atlas Clausing Craftsman
There is an"A inside-a-triangle" symbol on one side of the handle and"No. 8" on the other side. Not sure of the brand name. The handle itself is 3-13/16" long and has a maximum width of 11/16" at the end. There is a 3/8" x 3/8" square opening on one side for the tool post screw and 9/16" diameter opening on the other side with 1/4" x 3/16" slot. This end of the wrench is 3/4" wide. There are no personal names inscribed anywhere.
2 Logan 11" Metal Lathe Crossfeed Screws
This auction is 2 Logan 11" Metal Lathe Crossfeed Screws. PLEASE SEE OUR OTHER AUCTIONS* We will provide an eBay invoice once the auction has ended and we have packaged your item. The shipping costs will be based on your zip code or country of record. Please do not send payment until you have received our invoice. We ship via the US Postal Service We reserve the right to relist the item if Ebay goes down within two hours of the end of the auction. Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
Logan 11" Metal Lathe Lantern Toolpost Parts
This auction is Logan 11" Metal Lathe Lantern Toolpost Parts. 980 id center hole. PLEASE SEE OUR OTHER AUCTIONS* We will provide an eBay invoice once the auction has ended and we have packaged your item. The shipping costs will be based on your zip code or country of record. Please do not send payment until you have received our invoice. We ship via the US Postal Service We reserve the right to relist the item if Ebay goes down within two hours of the end of the auction. Happy Bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
Craftsman lathe chuck 4 jaw independent 6 inch dia. for Atlas Logan South Bend
Craftsman 6" diameter 4 independant jaws chuck.
LOGAN LATHE GEAR DOOR ASSEMBLY
Here is a LOGAN LATHE GEAR DOOR. Shows no damage or repairs in storage last 30yrs. Retains the hinge bracket and bolts and most of the original paint on the inside. The outside of the cover has much flaking and paint loss from shelf storage. Shipping flat-rate to the lower 48 is $13 all others must contact seller for actual cost.
MORSE TAPER 1 MT1 METAL LATHE CUP CENTER SOUTH BEND ATLAS LOGAN CRAFTSMAN
MORSE TAPER 1 CUP CENTER The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
ARMSTRONG NO 0B 1/2" BORING TOOL HOLDER & BAR SOUTH BEND ATLAS LOGAN METAL LATHE
ARMSTRONG BORING TOOL HOLDER NO. 00S 11/32" X 3/4" X 5" LONG J H WILLIAMS BORING BAR HOLDER NO. 0B 1/2" 8" LENGTH The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.