In 
 
Order by: 
Available to: 
Price: 
 - 
$
45.00
Buy It Now
$147.91 Shipping
Condition: Used
Location: Farwell, United States
I got this lathe from a scrap yard and parted it out. All the parts that I have for it are listed. This part is in used condition. Help yourself to a ... moregood deal! are used, unless otherwise specified.
$
29.99
Buy It Now
$11.63 Shipping
Condition: Used
Location: Baldwin, United States
$
15.50
1d 12h 47m 22s
6 bids
$9.65 Shipping
Condition: Used
Location: Bangor, United States
Excellent condition Royal 4 position turret tool post. It was used on a South Bend 9A.As my retirement hobby I’ve restored numerous South Bend lathes ... moreto showroom condition. Over the years I’ve collected quite a backlog of parts. The items I post are clean but will have some dings, dents, and blemishes from normal use and age. I try to take pictures from all angles to point out areas of possible concern. However, if you wish to have a closer look at the item before you push the Buy button, please feel free to call me for an iPhone FaceTime session – Bruce 207 944-1785. Note: this is a convenience to assure a happy seller and buyer. Absolutely no transactions for an offline purchase will be made or discussed.
$
49.95
Buy It Now
$15.00 Shipping
Condition: Used
Location: Uxbridge, United States
Up for auction is a Logan 10" lathe rear back drive/ motor to leg or pan bracket. Please look at the photo for condition I can email more pictures ... moreupon request. Thanks for looking. Posted with
$
24.95
Buy It Now
$9.59 Shipping
Condition: Used
Location: Waterford, United States
Very Nice- Original Logan tailstock wrench for a Logan 10" Model 820 lathe. Hex is 15/16" All in fine order. As shown. Always combine shipping- ... moreIf you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
28.60
4d 13h 1m 15s
0 bids
$68.55 Shipping
Condition: Used
Location: Philadelphia, United States
Nice- Original rocker type tool post and tool post wrench assembly for a Logan 9" or 10" lathe. Tool post base is 1 3/8" x 1 3/8" ... more5/16" thick. Tool post body diameter is 1" Stands 3 1/4" to the shoulder. Interior post dimensions are 7/16" wide x 1 5/8" with the washer and rocker in place. Bolt is removable from body. 3/8" tool post wrench is also included. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
35.00
Buy It Now
$15.75 Shipping
Condition: Used
Location: Paramus, United States
I believe this is a model 200 lathe. used condition, shows signs of use.
$
17.50
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
This manual covers all of the parts for this lathe with nice exploded view diagrams. Lathe Practices Series. Lathe Operations. I have collected this information ... morefor many years and have found the information they contain to be priceless in using and setting up the machines properly.
$
225.00
Buy It Now
$16.00 Shipping
Condition: Used
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. ding or mark ... moreon everything. If I can not then I must take pictures of everything.
$
45.00
Buy It Now
$19.30 Shipping
Condition: Used
Location: Paramus, United States
Good used condition, shows signs of use.
$
60.00
Buy It Now
$12.00 Shipping
Condition: Used
Location: Mahwah, United States
Ding or mark on everything. If I can not then I must take pictures of everything. I will extend to you the following as my father did. I am not cleaning ... moreanything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now.
$
27.99
Buy It Now
$8.99 Shipping
Condition: Used
Location: Temecula, United States
DESCRIPTION: USED. 2 STEP MOTOR PULLEY FOR THE LOGAN METAL LATHE. THE STEPS MEASURE 2 1/4- 4 1/4. THE BORE IS 1/2" CLICK ON THE" SHIPPING AND ... morePAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AN
$
175.00
Buy It Now
$17.15 Shipping
Condition: Used
Location: Paramus, United States
Description Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of ... moreour repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~~~~ good condition for tooling auctions: Lathes may vary in models/years/etc; please be sure you are bidding on the correct item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax Please contact me through ebay message system. Thank you!
$
14.99
Buy It Now
$4.10 Shipping
Condition: Used
Location: Neptune, United States
$
17.99
Buy It Now
$4.85 Shipping
Condition: Used
Location: Nashville, United States
As shown, in good used condition showing minimal wear.
$
210.00
Buy It Now
Free Shipping
Condition: New
Location: Lake Villa, United States
16/32 tooth gear for QCGB on Logan Lathe. Gear teeth are Precision machined. These are made of steel with a bronze bushing.
$
39.95
Buy It Now
$8.95 Shipping
Condition: Used
Location: Paramus, United States
Used condition. they fit good on the lead screw with no excessive play.
$
125.00
Buy It Now
$19.82 Shipping
Condition: Used
Location: Paramus, United States
Used condition, shows signs of use. I did not see the lathe run under power, the front bearing turns good. feel like it may be slightly rough. the rear ... morebearing barely turned, its not included. I believe this is a model 200 lathe.
$
70.00
Buy It Now
$17.90 Shipping
Condition: Used
Location: New Hyde Park, United States
Logan 200 10” Machinist Metal Lathe Banjo Mint Condition.
$
7.99
Buy It Now
$3.85 Shipping
Condition: Used
Location: Nashville, United States
$
19.99
Buy It Now
$4.25 Shipping
Condition: Used
Location: Nashville, United States
As shown, in good used condition showing minimal wear.
$
95.00
Buy It Now
$9.85 Shipping
Condition: Used
Location: Orlando, United States
Graduated 0-120 Lathe Dial Compound Slide South Bend, Logan, Sheldon. See Pictures for more information on sizeExcellent Condition
$
24.95
Buy It Now
Free Shipping
Condition: Used
Location: Neptune, United States
You get the one you see in the pictures.
$
159.00
Buy It Now
$20.00 Shipping
Condition: New
Location: Schaumburg, United States
250-202XL (1PC) Oversize Slot Boring,Turning & Facing Tool Holder, can use square tool bits or round shank tool up to 3/4". 250-204 (1PC) Heavy Duty Boring ... moreBar Holder, can use 3/4" and 1" two size shank boring bars.
$
20.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
Logan Lathe Models 815 & 820. It does not contain any instructions or maintenance information. It contains 17 pages. For Models : 815 & 820. About this ... moremanual : This is a high quality reproduction manual which has been scanned with a high resolution scanner.
$
17.50
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
It has 12 pages. Logan 14" Lathe Model 6560. For Models : 6560. Setting Up the Lathe. The Lathe Bed. Lathe Centers. About this manual : This is a high ... morequality reproduction manual which has been scanned with a high resolution scanner.
$
150.00
Buy It Now
$39.20 Shipping
Condition: Used
Location: Hastings, United States
PT2542NLI or AS1960N3. Countershaft or underneath cabinet drive pulley & shaft. South Bend 9" 10K Lathe.
$
17.50
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
Untitled Document Free. Fast Shipping Every Business Day! Logan 9B Series Metal Lathe Instructions Manual Click for Our Complete Catalog Manual Description: ... moreNumber of Pages: 12 This is a reproduction. Not a photocopy, of an original Logan 9B Series Metal Lathes Instructions Manual. This manual contains information on lubrication, maintenance, adjustments, spindle speeds, wiring diagrams, operations, and controls. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I may have more than one manual that covers your machine. And I am adding new manuals all the time. I do not carry additional parts for machinery. Except for what is listed.
$
145.00
Buy It Now
$18.10 Shipping
Condition: Used
Location: Paramus, United States
I believe this is a model 200 lathe. check all pics.
$
448.97
Buy It Now
$13.95 Shipping
Condition: Used
Location: Clinton Township, United States
The chuck looks great for the age. We do NOT have a key but the opening is for a 1/4" square key. We were able to turn the scroll with a 1/4" tool bit ... moreand it moves smoothly. As with all scroll chucks, a cleaning is always helpful.
$
250.00
Buy It Now
$16.10 Shipping
Condition: Used
Location: Bangor, United States
Reversible jaws …. fit snugly and move freely. It was used on a South Bend 9 but will fit any lathe with an 1 1/2”-8 spindle nose.
$
189.00
Buy It Now
Condition: New
Location: Saint Charles, United States
For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck ... moreto make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
74.99
Buy It Now
Free Shipping
Condition: Used
Location: Anderson, United States
In good working condition, but has scratches, signs of use, dings, rust and surface marks. NO KEY INCLUDED.
$
24.00
Buy It Now
Free Shipping
Condition: New
Location: Franklin, United States
Logan 11” lathe tool holder t-nut. size is. 960 top. 1.390 bottom.1/2 thick.1/4 deep slot.
$
24.99
Buy It Now
$4.80 Shipping
Condition: New
Location: Lima, United States
Wood turners may find this setup useful too! Capture gage between centers with bubble end straight up. T his tool fromAlisam Engineering, makes centering ... moreyour lathe tool to your lathes axis a quick and easy task!
$
19.99
Buy It Now
$4.25 Shipping
Condition: Used
Location: Nashville, United States
$
17.50
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
Logan Lathe Models 2525, 2527, 2555, 2557. It does not contain any instructions or maintenance information. It contains 17 pages. About this manual : ... moreThis is a high quality reproduction manual which has been scanned with a high resolution scanner.
$
325.00
Buy It Now
Free Shipping
Condition: Used
Location: Yorktown, United States
$
16.50
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
Logan Lathe Model 19 55 Parts List Manual For models: 1955 Includes sections on: Parts List, Assembly breakdown, Includes Pub BUC-1A Number of pages: ... moreApprox 16 Publication No.N/A Publication/Revision Date: N/A Notes: Includes Publication BUC-1A Universal Chuck Installation and Maintenance Questions? Email: eugene@fabersurplus.com Phone: 316-210-4079 after 11:00 am Central Time Ships USPS First Class Free or Upgrade to Priority Mail for faster delivery. Reprinted from original manual using high quality 24lb paper and comb binding. Covers are printed from 65lb cardstock for extra durability. See my for more manuals
$
19.99
Buy It Now
$14.95 Shipping
Condition: Used
Location: Waukegan, United States
Up for sale are (4) extra long #2 morse taper drill with over 7" of flute. There is a 11 m.m. and a 17/32", 33/64" and a 37/64". Might need a little touch ... moreup but I believe they will cut fine.
$
20.00
Buy It Now
$3.00 Shipping
Condition: Used
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. If you want ... morea bunch of "gears" then sure we can talk but for one or two.
$
17.50
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
Untitled Document Free. Fast Shipping Every Business Day! Logan 1900 Instructions Manual Manual Description: Number of Pages: 11. This is a reproduction ... moreof an original Logan 1915. 1917, 1920, and 1922 Lathe Instruction Manual. This manual contains information on adjusting the belts and countershaft, the back gears, spindle speeds, threading chart, gear change for the quick change gear box, oiling, and a wiring diagram. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I may have more than one manual that covers your machine. And I am adding new manuals all the time. I do not carry additional parts for machinery. Except for what is listed. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
14.99
Buy It Now
Free Shipping
Condition: New
Location: Naperville, United States
Welcome to Old Time Service Manuals! You are bidding on a digital reproduction of a genuine Logan 10" Lathe Models 200. 201, 210, 211 Owners Manual. ... moreIt contains a professionally reproduced copy of all the original Specifications. Parts Lists, Schematics, etc. that were included back in the days of yore when machinery was meant to last! Unfortunately. The machines themselves have outlasted many of the original service manuals(these are becoming rarer and harder to find as time goes by) Our goal here at Old Time Service Manuals is to offer a fabulous reproduction of out of print owners and service manuals at an affordable price. Each manual has been digitally reproduced and"cleaned up" by a professional computer artist to achieve the best results possible with the existing data available. The end result is a"new" manual(you get everything that you see in the pictures) in a looseleaf format. Including 3-hole punch so that you can store and organize your pages into binders. I will also include any additional extras, pages, ads, etc. that came with the originals. Some of these extras are a fun stroll down memory lane! This particular manual contains 42 pages total. This is a nice deal for someone looking for one of these hard to find manuals. These would also make a special gift without breaking the bank. Shipping is FREE in the continental United States and I will be sure to ship this item within 24 hours of your purchase. Feel free to email me with any questions that you may have or if you are looking for a particular manual that you cannot find. I will be constantly adding and updating my library. Thanks for looking and come back to visit us again in the future!
$
50.00
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF ITEM QUESTIONS OR CONCERNS FEEL FREE TO ASK ITEM COMES EXACTLY AS SHOWN IN PICTURES LOOK AT CHART
$
166.95
Buy It Now
Condition: New
Location: Saint Charles, United States
For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck ... moreto make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
16.50
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
Logan Lathe Models 1805. 1806, 1810, 1811 Instruction Manual For models: 1805. 1806, 1810, 1811 Includes sections on: Setting up the Lathe Mounting the ... moreMotor Adjusting the Belts, The Countershaft, The Headstock, The Back Gears, Spindle Speeds, Power Feeds, Chart of Threads and Feeds, The Lathe Bed, The Carriage, The Tailstock, Oiling the Lathe, Motor and Switch Wiring Diagram Number of pages: Approx 16 Publication No.N/A Publication/Revision Date: N/A Notes: Questions? Email: eugene@fabersurplus.com Phone: 316-210-4079 after 11:00 am Central Time Ships USPS First Class Free or Upgrade to Priority Mail for faster delivery. Reprinted from original manual using high quality 24lb paper and comb binding. Covers are printed from 65lb cardstock for extra durability. See my for more manuals
$
99.99
Buy It Now
$9.99 Shipping
Condition: Used
Location: Carol Stream, United States
JACOBS HEADSTOCK CHUCK No. 58B 1-1/2" X 8TPI SOUTH BEND 9, ATLAS 10, LOGAN LATHE. Used condition with dings dents and scratches. Spins smoothly. Please ... moresee photos for details. Thanks for looking
$
16.50
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
Logan Lathe Model 19 3 5 Parts List Manual For models: 1935 Includes sections on: Parts List, Assembly breakdown, Includes Pub BUC-1A Number of pages: ... moreApprox 17 Publication No.N/A Publication/Revision Date: N/A Notes: Includes Publication BUC-1A Universal Chuck Installation and Maintenance Questions? Email: eugene@fabersurplus.com Phone: 316-210-4079 after 11:00 am Central Time Ships USPS First Class Free or Upgrade to Priority Mail for faster delivery. Reprinted from original manual using high quality 24lb paper and comb binding. Covers are printed from 65lb cardstock for extra durability. See my for more manuals
$
17.50
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
This is a reproduction of an original Logan Lathes, Shaper and Accessories Catalog. This catalog contains a lot of Logan lathes and the 9" Logan Shaper. ... moreIt gives you specifications for each machine as well.
$
89.00
Buy It Now
$14.00 Shipping
Condition: Used
Location: Scottsdale, United States
Jacobs 59B Drill Lathe Spindle Chuck 1 1/2 X 8 Atlas Craftsman South bend Logan in excellent working condition you get the one you see in the pictures. ... moreThis will be shipped USPS insured within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but please wait for me to invoice you before you pay since ebay charges 10% on shipping fees and I will be on the phone for hours with them getting them to combine the shipping for me which they dont like to do since they lose money.
$
250.00
Buy It Now
$40.20 Shipping
Condition: Used
Location: Paramus, United States
Used condition, shows signs of use. I believe this is a model 200 lathe.
$
75.00
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF ITEM QUESTIONS OR CONCERNS FEEL FREE TO ASK ITEM COMES EXACTLY AS SHOWN IN PICTURES INTERNATIONAL SHIPPING ... moreAVAILABLE PLEASE CONTACT BEFORE MAKING FINAL PURCHASE SO ARRANGEMENTS COULD BE MADE
$
65.00
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF ITEM QUESTIONS OR CONCERNS FEEL FREE TO ASK ITEM COMES EXACTLY AS SHOWN IN PICTURES LOOK AT CHAR FOR EXACT ... moreSPEC
$
65.00
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF ITEM QUESTIONS OR CONCERNS FEEL FREE TO ASK ITEM COMES EXACTLY AS SHOWN IN PICTURES LOOK AT CHAR FOR EXACT ... moreSPEC
$
50.00
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF ITEM QUESTIONS OR CONCERNS FEEL FREE TO ASK ITEM COMES EXACTLY AS SHOWN IN PICTURES LOOK AT Chart
$
16.50
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
Logan Lathe Model 19 5 0 Parts List Manual For models: 1950 Includes sections on: Parts List, Assembly breakdown, Includes Pub BUC-1A Number of pages: ... moreApprox 16 Publication No.N/A Publication/Revision Date: N/A Notes: Includes Publication BUC-1A Universal Chuck Installation and Maintenance Also. Original had prices stamped as obsolete on 5 pages, see gallery pictures. Questions? Email: eugene@fabersurplus.com Phone: 316-210-4079 after 11:00 am Central Time Ships USPS First Class Free or Upgrade to Priority Mail for faster delivery. Reprinted from original manual using high quality 24lb paper and comb binding. Covers are printed from 65lb cardstock for extra durability. See my for more manuals
$
60.00
Buy It Now
$7.95 Shipping
Condition: Used
Location: Sunnyside, United States
Lathe Spindle Nose Thread protector and collet adaptor remover. For any spindle with 1-1/2" -8 threads. Logan, Atlas, Craftsman, Clausing, Southbend.
$
80.16
Buy It Now
Condition: New
Location: Saint Charles, United States
For back plate you would need to drill mounting holes and turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back ... moreplate more concentric with the lathe spindle and reach chuck's TIR.
$
65.00
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF ITEM QUESTIONS OR CONCERNS FEEL FREE TO ASK ITEM COMES EXACTLY AS SHOWN IN PICTURES LOOK AT CHAR FOR EXACT ... moreSPEC
$
65.00
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF ITEM QUESTIONS OR CONCERNS FEEL FREE TO ASK ITEM COMES EXACTLY AS SHOWN IN PICTURES LOOK AT CHAR FOR EXACT ... moreSPEC
6 7 8 9 10 11 12 13 14 15 16 17 18 19
 In 

Former Listings  
 
Williams No. 2R Lathe Tool Holder For South Bend, Logan, Atlas, Sheldon
This is a used. But excellent condition, Williams 2R right-hand turning lathe tool holder. This genuine Made-In-USA tool will outlast any of us users! Please put it to work today!
Logan Lathe Pedestal Leg
Up for auction is Logan lathe pedestal leg in good condition. A handling fee of $ 1.05 is added to cover the cost of tracking. I am always happy to combine shipping. Thnk you.
METAL LATHE FACEPLATE 1 1/2-8 MOUNT MACHINIST TOOLING SOUTH BEND ATLAS LOGAN
DESCRIPTION: USED. 5 1/8" DIAMETER X 1 1/2-8 METAL LATHE FACEPLATE. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MA
Jacobs 18N Super Chuck 1/8" - 3/4" 2 MT Atlas Clausing Southbend Logan Lathe
This is a used 18N Jacobs Superchuck with 1/8 to 3/4" capacity. In good working condition with a new Jacobs 2MT to 4 Jacobs Taper shank. Has some scratches and nicks from use. Has a number scribed on it, see pictures for condition. I combine shipping whenever possible, if you win multible auctions, please wait for an invoice from me. Or pickup is always welcome. Thanks for looking. Powered by The free listing tool. List your items fast and easy and manage your active items.
8 1/2 INCH FACE 1 1/2" - 8 TPI SPINDLE ATLAS LOGAN SOUTHBEND LATHE 9-365
A 8 1/2 inch diameter used face plate in excellent condition. Will fit an Atlas, Logan, Southbend or similar lathe with a 1 1/2" 8 TPI spindle. FREE EXPEDITED SHIPPING! U.S. ONLY) Thanks! PAYMENT– I accept PayPal only. Unless other arrangements are made. Payment must be made within 5 days or the item will be relisted. SHIPPING– I charge actual shipping. No extra fees. I will combine shipping for multiple items, please ask for an invoice if you are buying multiple items. SATISFACTION- I value my feedback rating and unless listed AS IS. Will guarantee your satisfaction. If you have any issues with the item you won, please contact me before leaving feedback and I will do all I can to make it right for you. Please inspect the item immediately upon receipt. If it does not meet your approval you may return it to me within 14 days for a full ... morerefund. Return shipping. Including insurance costs if necessary are the responsibility of the customer. I cannot be responsible for returned merchandise that is damaged in shipping.
5" Handwheel For 10" Logan Lathe Apron Hand Wheel
5" handwheel For 10" Logan Lathe Apron in very good condition. 1/2" bore with keyway. Thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1449fc2d730-0xe9-
Miter Gear Set For 10" Logan Lathe Apron
Miter Gear Set For 10" Logan Lathe Apron in very good condition. They are clean and are ready to use. Thanks for looking.
10" Logan Lathe Compound With Large Dial Approx. .10 Backlash
10" Logan Lathe Compound With Large Dial Approx. 10 Backlash Large dial is not original. Please ask if you have questions. Thanks for looking.
Logan 10" Lathe Leadscrew For 43" Bed 3/4" X 46 5/8" Long
Logan 10" Lathe Leadscrew From 43" Bed with no quickchange box. Very Good condition. Gear end is 5/8" and the other end is 1/2" diameter. Total shaft length is 46 5/8" long 3/4" shaft diameter Thanks for looking.
EXCELLENT ORIGINAL LOGAN 10" MODEL 820 LATHE COUNTERSHAFT 2 STEP PULLEY LA-141
Excellent Condition- Original drive box countershaft pulley for a Logan 10" lathe. This is the correct part number for Logan 10" lathes Model 200. 820, 830, 840 and 850. May fit others, please check your parts manual. Interior diameter bore is 3/4" Pulley retains original paint, stamped with original Logan part number LA-141. Pulley runs straight and true. In excellent condition, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOGAN 10 11 METAL LATHE 431 5" 3 JAW CHUCK
LOGAN 10 11 METAL LATHE 431 5" 3 JAW CHUCK Thank you for your interest. Please be sure to READ EVERYTHING below before bidding. We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. So, please as always contact us through ebay message system with any questions or problems before going through ebay/paypal. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap. Thank you! DESCRIPTION: ~~~~~~~~~~~~~~~~ marked 431 5" diameter 3 jaw chuck self centering includes key tooling auctions: Lathes may vary in models/years/etc; please be sure ... moreyou are bidding on the correct item for your lathe. As always. Please check your measurements before you bid. Please note: Shipping is done through USPS priority is with delivery confirmation& insurance. USPS have increased their prices once again. SHIPPING at this time to USA ONLY. Thank you. PA residents add 6% sales tax- Please contact me through ebay message system. Thank you!
LATHE TAILSTOCK TURRET #2 TAPER FITS ATLAS CRAFTSMAN SOUTH BEND LOGAN
Lathe Tailstock Turret. Germany Made. Model E4-489 Fits Lathes with#2 Morse taper Attachment is in good used condition. Check out my!
Logan Lathe Model # 820, ""Tail Stock Quil"" ,!!!!!Left Hand 1/2"-20 Thread!!!!
Logan Lathe Model# 820. Tail Stock Quil" Left Hand 1/2"20 Thread! NOTE: YOU MUST MAKE A STANDARD 60 DEGREE LEFT HAND 1/2"20 TAILSTOCK SCREW TO USE THIS! Normal 0 I do combine shipping. YOU MUST REQUEST A TOTAL ON MULTI PURCHASES" DON'T INSTANT PAY UNLESS YOU ARE BUYING ONLY ONE ITEM. Buy any 10 or more Tooling items and shipping is FREE! Questions and Comments are Welcome, Thanks for Looking All my items that have shipping listed. Are on that single item purchase. Shipping gets combine on multiple purchases, so don’t worry so much about shipping only about shopping. Note: If you're looking for 7" x 10" Mini Lathe parts that I don't have listed. Contact me, all I need is a part number and I can give you a price quote. Thanks Powered by The free listing tool. List your items fast and easy and manage ... moreyour active items.
JACOBS 18N DRILL CHUCK W/ MT4 & KEY SOUTH BEND ATLAS CLAUSING LOGAN LATHE MILL
JACOBS 18N DRILL CHUCK W/ MT4& KEY OPERATES SMOOTHLY. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU ... morePURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
MACHINIST TOOLS LATHE 2 Lantern Style Tool Post s for South Bend Logan Atlas
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.ZZA
Atlas Craftsman 13-16" Lathe Tool Post Rocker Lantern Holder Logan South bend
Offered is a nice used Lantern style tool post for a 13" 16" South Bend or other type of similar lathes. This one came off of a South Bend. Includes all that is in the picture. Slot is.58 wide. t slot key is 1.75"x1.90"x.38"
Logan 11" Lathe Apron Power Feed Worm & Clutch Assembly LA-54-2
Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime
1-3/8" Brass Lathe Stock Atas Southbend Logan 2 pcs
Here is two pcs 1-3/8" brass lathe stock. One 9-1/2" and one 5-1/4" long. Grade is c360 should machine very easily in a small metal lathe. Has some scratches and nicks, been laying around for a few years. I will ship in a medium flat rat box to save on shipping. I combine shipping whenever possible, if you win multible auctions, please wait for an invoice from me. Or pickup is always welcome. Thanks for looking. Powered by The free listing tool. List your items fast and easy and manage your active items.
PAIR OF DRILL CHUCKS for Atlas Craftsman South Bend Logan lathe
This listing is for a pair of drill chucks. They are both 1/4" One is a Jacobs 1B and the other keyless chuck has no name. They are in great shape. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
Logan 7502 5C Collet Spindle 56" Turret Metal Lathe + Closer Collets Trav-A-Dial
Questions? Call us: 1-877-328-9236. Logan 7502 5C Collet Spindle 56" Turret Metal Lathe + Closer Collets Trav-A-Dial. Manufacturer: Logan Model: 7502 Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Logan Condition: Used. Comes in non-original packaging. It has scuffs and scratches from normal use. Notes: This item was not fully tested. Since we do not have the proper resources. NOTE: The left spring-loaded handle on the screw-cutting Gearbox has its pin broken off. If we hold it up in position the spindle and carriage assembly move with no problems. The buyer will be responsible for replacing it for proper operation. After the lathe runs for a little while some times the motor gets louder. It sounds like it may be the bearings, but we are not sure. When power is applied it does run very ... moresmoothly in each gear and at various speeds. The carriage assembly easily moves forward/reverse, manually or automatically. The eight position turret can be turned and locked into position. We could not get the lever(dark red/brown knob) under the yellow reverse button to do anything. It was pulled up/down but we did not notice any changes. No further testing was performed. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Logan 7502 5C Collet Spindle 56" Turret Metal Lathe, 1) Chuck Back, 30) 5C Collets, 1) Trav-A-Dial, Specifications: Manufacturer: Logan, Model: 7502, 5C Collet Spindle, Variable Speed, Set of Collets(30) 1/8" to 63/64" Collet Closer, Threads per Inch(feeds in inches per rev. 4 to 224, Auto-Cross Feed Q.C. Gear Box: Yes, Bed Length: 56" Stand: Pedestal, 8 Position Turret Holder, Chuck Back, Trav-A-Dial, SKU: O02L010 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and
Southbend Atlas logan delta rockwell 4 jaw metal lathe chuck 1" 1/2-8 tpi
Selling a 4 jaw chuck for a southbend 9" metal lathe. It is made in usa.This is a 6" chuck with reversable jaws-has 1"1/2-8TPI spindle threads which is common on most smaller machines. please verify to see if your machine has the same threads.These threads are in good shape-chuck and threads could use a cleaning. pictures show condition. Shipped to your door for $175 total OVER THE NEXT 6 MONTHS(OR WHENEVER I GET TIME) I WILL BE LISTING SOUTHBEND AND ATLAS LATHE ITEMS FROM AN EDERLY RELATIVES SHOP. MOST ITEMS ARE GREASY OR DIRTY AND HAVE SCRAPES AND SCRATCHES ASSOCIATED FROM BEING USED IN A HOME SHOP. IF ANY KNOWN PROBLEMS EXIST I WILL STATE IT IN DESCRIPTION. I'M NOT WALMART SO ALL ITEMS ARE SOLD"AS IS" I WILL DESCRIBE ITEMS AS BEST TO MY ABILITY- IF YOU HAVE ANY QUESTIONS PLEASE ASK AND I WILL GET BACK TO YOU. ... moreIF THERE IS A PROBLEM DUE TO MY DISCRIPTION YOU CAN CONTACT ME AND WE WILL FIGURE SOMETHING OUT. ALL ITEMS WILL BE SHIPPED THRU THE POST OFFICE USUALLY WITH A FLAT RATE BOX. ALL SHIPPING PRICES REFLECT THAT YOU LIVE IN THE LOWER 48 STATES AND ARE USING FLAT RATE SHIPPING- SORRY BUT I ONLY SHIP WITHIN THE UNITED STATES. I DON'T SHIP TO CANADA. SOUTH AMERICA,OR EUROPE. SORRY
LOGAN 9" / 10" / 11" LATHE 44T 44 TOOTH GEAR
LOGAN 9" 10" 11" LATHE 44T 44 TOOTH GEAR Brand Logan Packaging None Condition Excellent Quantity 1 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
Logan lathe 10" model 210 top cast iron cover
This is the top cast iron cover from a Logan lathe model 210 10" machine. This will fit other 10" Logans also. Excellent condition. Must be paid for by Paypal good luck and happy bidding!
Logan lathe 10" model 210 side gear cover and mount and nice gear chart
This is the side cast iron gear cover and mount from a Logan lathe model 210 10" machine. This will fit other 10" Logans also. Excellent condition with a beautiful clear gear chart. Must be paid for by Paypal good luck and happy bidding!
Logan lathe 10" model 210 leather belt 39 1/4" x 1"
This is a very nice pretty new leather belt that is 39 1/4" long x 1" wide from a 10" logan model 210 lathe. This will fit other 10" logans. This is in very good condition. Must be paid for by Paypal good luck and happy bidding!
Logan lathe 10" model 210 compound mounting studs and nuts
This is the two compound mounting studs and nuts from a Logan lathe model 210 10" machine. The nuts are the slim style and one uses a 1/2" wrench and the other a 9/16" but they work good. This will fit other 10" Logans also. Excellent condition. Must be paid for by Paypal good luck and happy bidding!
Logan lathe 10" model 210 cross feed chip cover
This is the cross feed chip cover from a 10" logan model 210 lathe. This will fit all 10" logans. This is in very good condition. Must be paid for by Paypal good luck and happy bidding!
Logan lathe 10" model 210 lead screw for 43" bed
This is a very nice lead screw for a 43" long bed from a 10" logan model 210 lathe. This has the key for power cross feed. This will fit other 10" logans. This is in very good condition. Must be paid for by Paypal good luck and happy bidding!
Logan lathe 10" model 210 counter shaft and motor mount
This is the complete counter shaft assembly from a 10" logan model 210 lathe. This is in beautiful condition with excellent yoke.Bearings,pulley's etc. This is the unit that sits on the bench behind the head stock,not the one that has the leg down to the floor. This must be picked up or I will charge $25.00 to properly pack it up plus UPS cost. If you want a quote send me your zip code. This will fit other 10" logans. This is in very good condition. Must be paid for by Paypal good luck and happy bidding!
Logan lathe 10" model 210 top cover latch
This is the top cover latch from a Logan lathe model 210 10" machine. This will fit other 10" Logans also. Excellent condition. Must be paid for by Paypal good luck and happy bidding!
Logan lathe 10" model 210 gear guard
This is the gear guard from a Logan lathe model 210 10" machine. This will fit other 10" Logans also. Excellent condition. Must be paid for by Paypal good luck and happy bidding!
5" CUSHMAN 3 JAW CHUCK 4 ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE 1 1/2 X 8 TPI
Original 5" 3 Jaw with Reversing Jaws Cushman Chuck for an Atlas. Craftsman, South Bend or Logan Metal Lathe. 1 1/2 X 8 TPI. Chuck measures 5" in diameter with a 2 1/4" body height. Chuck has some light marks as shown. Stamped on chuck is"THE CUSHMAN CHUCK CO. HARTFORD, CONN MADE IN UNITED STATES OF AMERICA REF NO 5340B" Comes with key. I have added insurance to the cost of shipping. For shipments in the US and Canada a $3.30 rate has been added. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
DUMORE TOOL POST LATHE GRINDER CAT 14-011 ATLAS SOUTH BEND LOGAN CRAFTSMAN
DUMORE Tool post grinder The Dumore Corporation. Mauston.WI USA Type 14-011 Model 8385 Volts 115 Amp 1.12 1/4" diam Arbor No Load rpm 16.000 Tool comes with extra Stones.Including a Collet for Internal grinding with two bits. LIKE NEW! Very LITTLE USE IF ANY. Comes with all parts shown on pictures. Check out my!
Lathe Chuck 5" Westcott Atlas Craftsman Logan 1 1/2-8 thread
For Sale: A Westcott brand lathe chuck. It is a 5" chuck(actual OD measures 5.180) It is a 3 jaw self centering chuck. The Chuck Key(T" handle) is included. The chuck has 1 1/2-8 threads(1 1/2" major diameter x 8 threads per inch) on the back to attach it to the lathe. This is a common size and is used on many Atlas/Craftsman lathes as well as some Logan lathes. It is not used on all lathes. So be sure to check your lathe's requirements to be sure this will fit. The chuck is in good working condition. I used it regularly until replacing it with a larger chuck a few days ago. Items included in this sale are the chuck. The jaws that are installed on it, and the chuck key. Check out the pictures, what you see is what you get. Originally this chuck had a second set of jaws. But I do not have them, and therefore they are not ... moreincluded with this sale. This chuck weighs about 15 pounds. So please pay attention to the shipping charges. I will be shipping USPS Priority Mail. The Chuck is used. I did not disassemble the chuck to clean it thoroughly. Therefore there will be some small metal chips in the jaw mechanisms. It is normal that small chips get into the jaw mechanism with normal use. That being said. The chuck does function properly and has a smooth movement.
Lantern type tool holder 5/8" tools 12 to 14 inch lathe Clausing Logan Atlas
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Rocker type tool post for 12” to 14” lathe. This one was part of the tooling package for a Clausing 12’ lathe. Tool post body diameter is 1.2" Stands 4 1/32" tall not counting the bolt. Clamping bolt is ½” diameter X 3” long. With a ½” square head. Post slot is.625” wide. Slot length is 2.100” Clamp bolt is mostly free and moves freely with light pressure with a wrench. It’s a little too tight to move completely by hand. Threads on end of bolt are mushroomed slightly. So it can’t be easily removed completely. The bolt could be removed and cleaned up easily if you wanted to put a little bit of work into it. I could have cleaned it up to work freely. But many buyers want them in original condition. There is a light brownish patina on the parts, which ... moreI have not removed. The holder is fully functional just as it is. Smaller washer is 1 3/4” X 2 1/32” X ¼” thick. This one fits the post perfectly. 2nd larger washer is about 2” X 2 3/8 X 7/16” thick. And was probably made to fit a certain lathe. You would need to machine it to fit your lathe, or make a similar washer to match your lathe. Rocker is 3” long and 5/8” wide. Matching washer is 3” diameter. A nominal 5/8” tool fits in the slot easily.
Logan lathe 10" model 210 lead screw support
This is the lead screw support from a Logan lathe model 210 10" machine. This will fit other 10" Logans also. Excellent condition. Must be paid for by Paypal good luck and happy bidding!
Logan lathe 10" model 210 belt guard
This is the motor and counter shaft belt guard from a Logan lathe model 210 10" machine. This will fit other 10" Logans also. This fits the small counter shaft assembly that sits on the bench behind the head stock.Not the units that have a leg down to the ground. Excellent condition. Must be paid for by Paypal good luck and happy bidding!
Logan lathe 10" model 210 lead screw bearing/banjo mount
This is the lead screw bearing and banjo mount from a Logan lathe model 210 10" machine. This will fit other 10" Logans also. Excellent condition. Must be paid for by Paypal good luck and happy bidding! g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-144aa824426-0x107-
Logan lathe model 210 tail stock clamp,bolt,washer and nut
This is an original tail stock clamp.Bolt,washer and nut from a Logan lathe model 210 10" machine. This will fit all 10" logan tail stocks.It is in excellent condition. Must be paid for by Paypal good luck and happy bidding!
Logan lathe 10" model 210 lead screw reverser retainer and screws
This is the lead screw reverser retainer and screws from a 10" logan model 210 lathe. This will fit all 10" logans. This is in very good condition. Must be paid for by Paypal good luck and happy bidding!
VINTAGE 1977 LOGAN POWERMATIC LATHES & ACCESSORIES MASTER CATALOG LOGAN LATHE
5 DAY AUCTION! VINTAGE LOGAN-POWERMATIC METAL LATHES CATALOG MASTER CATALOG#FC SEE PICS FOR TABLE OF CONTENTS SPECS. FEATURES, ACCESSORIES 28 PGS. 1977 YOU ARE BIDDING ON ORIGINAL LITERATURE UNLESS OTHERWISE STATED S&H $6.00 PRIORITY MAIL. COMBINED SHIPPING AVAILABLE. PLEASE WAIT TO TO INVOICED FOR MULTIPLE PURCHASES. INTERNATIONAL BIDDING REQUIRES APPROVAL. PHOTOCOPIES ARE NOT AVAILABLE PAYMENT EXPECTED WITHIN 3 BUSINESS DAYS OF AUCTION CLOSE SECOND-CHANCE OFFERS AVAILABLE ON SOME ITEMS
Atlas Milling Attachment Craftsman Logan Metal Lathe Machinist
This milling attachment is in great shape it also comes with the v channel jaw Posted with
Logan Craftsman Follow Rest Metal Lathe Hobby Machinist
This follow rest has had very little use it is in great shape it came off a 9 inch logan lathe Posted with
Atlas Logan Craftsman Metal Lathe Face Plate & Dogs
6 inch face plate with dogs 1 1/2 by 8 threads Posted with
Logan Craftsman Steady Rest Metal Lathe
This steady rest has had very little use it is in great shape it came off my 9 inch logan lathe Posted with
Atlas Craftsman Logan Metal Lathe Collet Closer
Lever style collet closer with 9 collets 1/8. 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16 and one that does not have a size on it these are 3at style collet this also has the taper that goes into the head stock every thing is in good working order Posted with
Southbend collet handwheel set up logan atlas craftsman metal lathe collets 9"
Selling a very rare handwheel collet setup from a 9" southbend metal lathe. This has the common 1" 1/2-8 TPI threaded mount. This should also fit atlas logan and craftsman lathes with that same size spindle threads. Good condition- It just needs a cleaning. Comes with all 20 collets pictures show condition. The flaws i can see on it are 15/64 and 7/32 collets are sprung but still look usable. The other collets have scrapes and scratches on them. There is a hairline crack from the spanner wrench which is shown in 1 picture- doesn't look to bother anything just want to note that. This will be shipped in a large flat rate box.So it will NOT come with the wood rack unless you want to cover the extra shipping costs. Then it would have to ship in some other type of larger box. OVER THE NEXT 6 MONTHS(OR WHENEVER I GET TIME) I WILL ... moreBE LISTING SOUTHBEND AND ATLAS LATHE ITEMS FROM AN EDERLY RELATIVES SHOP. MOST ITEMS ARE GREASY OR DIRTY AND HAVE SCRAPES AND SCRATCHES ASSOCIATED FROM BEING USED IN A HOME SHOP. IF ANY KNOWN PROBLEMS EXIST I WILL STATE IT IN DESCRIPTION. I'M NOT WALMART SO ALL ITEMS ARE SOLD"AS IS" I WILL DESCRIBE ITEMS AS BEST TO MY ABILITY- IF YOU HAVE ANY QUESTIONS PLEASE ASK AND I WILL GET BACK TO YOU. IF THERE IS A PROBLEM DUE TO MY DISCRIPTION YOU CAN CONTACT ME AND WE WILL FIGURE SOMETHING OUT. ALL ITEMS WILL BE SHIPPED THRU THE POST OFFICE USUALLY WITH A FLAT RATE BOX. ALL SHIPPING PRICES REFLECT THAT YOU LIVE IN THE LOWER 48 STATES AND ARE USING FLAT RATE SHIPPING- SORRY BUT I ONLY SHIP WITHIN THE UNITED STATES. I DON'T SHIP TO CANADA. SOUTH AMERICA,OR EUROPE. SORRY
LOT OF 28 5/16" CUTTING TOOL BITS FOR ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE
Nice Lot of 28 5/16" Cutting Tool Bits for an Atlas. Craftsman, South Bend or Logan Metal Lathe. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Logan 200 10" Lathe Dayton Motor and Motor Mount Montgomery Ward
Parting out a Logan Model 200 Lathe This lathe came out of an estate and had been sitting in a basement for close to 40 years. The serial number on the bed looks to be 16551(the second 5 is hard to read for sure) But based on this it looks liked it was made in 1942. That is from the Logan website. This auction is for the Dayton Motor and Motor Mount. Does not include cone pulley or other parts I am showing a photo of the set up as it was found- it is kind of a bastardized drive system- some parts look original, other parts are definitely modified, some are fabrications or newer. I will let the photos speak for themselves. I ran it enough to prove to me that the motor works and everything spun, but I can't say how good a shape the bearings or gears are in- it definitely needs cleaned up. The motor itself seems to be relatively newer and ... morein good working order. I will also be listing other parts.
JACOBS 30B 5/16" Drill Chuck w Taper for Atlas Craftsman South Bend Logan Lathe
Vintage Jacobs 30B 0-5/16" Drill Chuck Great for YOUR Vintage Machine Shop Set-Up. Made in the USA. Up for offer is a nice Vintage Jacobs 30B Drill Chuck with Taper. Capacity is marked 0- 5/16" Also marked THD 1/2" x 20. Condition is very nice overall as shown in photos. Chuck opens and closes nicely. Has some normal wear marks from use and storage. Seems to be a MT1 taper. Not abused. Auction includes only what is shown in photos. No box or paperwork. Overall. This looks to be a great chuck for your lathe, drill press or for whatever purpose you choose to use it. These great old chucks are Made in the USA. Not China. Get this one while you can. Items generally ship within 1 business day via USPS with tracking information uploaded via Ebay upon shipping. 14 day returns allowed(see details below) Please Read Before Bidding or ... moreBuying I have represented this item to the best of my limited ability. Buyers responsibility to examine all photos wih care and read description fully. Please ask any questions before bidding or buying. Buyers responsibility to determine condition. Completeness, fitment, use, usability, function and collectability before bidding or buying. As this is a pre-owned item it may have imperfections both mechanical and/or physical that were either not noticed or deemed insignificant due to it's vintage status. Please ask any questions before bidding or buying. No price adjustments on items after sale. USA SALES ONLY NO EXCEPTIONS NO FOREIGN SALES PAYPAL ONLY NO EXCEPTIONS PAYMENT DUE WITHIN 2 BUSINESS DAYS ITEM GENERALLY SHIPS WITHIN 1 BUSINESS DAY OF PAYMENT ITEM SHIPS VIA USPS WITH DELIVERY CONFIRMATION SHIPPING FEE REFLECTS POSTAGE. DELIVERY CONFIRMATION, INSURANCE IF INCLUDED AND PACKAGING SUPPLIES 14 DAY RETURN POLICY UNLESS OTHERWISE NOTED IN LISTING(SEE DETAILS BELOW) RETURN POLICY PLEASE REVIEW THE EBAY RETURN POLICY FOR BUYERS TO DETERMINE IF YOUR ITEM MEETS THE REQUIREMENTS FOR RETURN STATUS. ANY BUYER TRYING TO MANIPULATE THE EBAY RETURN SYSTEM OR DEEMED TO BE USING UN
Lot 2 Lathe 1/2 3/8 drill chuck 1 Morse Atlas Logan South Bend 109 Craftsman
Lot of 2 Lathe tailstock number 1 Morse Taper Ready to Recycle your old burned out Electric hand drill Chucks for use on your Lathe. 1/2 inch 20 Treads per Inch and 3/8 inch 24 Threads per Inch drill chucks. 1 Morse Atlas Logan South Bend 109 Craftsman Morse number 1. May be a Little Scratched and slight rust but functional like New. Ready to use and give years more of service. Thanks for Looking.
Logan 11" Lathe 917 & 922 Parts Manual
Hello, LOGAN 11' LATHE PARTS LIST FOR 917& 922 COVERS: HEADSTOCK ASSEMBLY SHIFTER RACK ASSEMBLY REVERSE GEAR ASSEMBLY COMPOUND ASSEMBLY WORM& CLUTCH ASSEMBLY AND MORE! This manual is 19 pages and comes COMB~BOUND( no cheap staples) This is a photocopy.Reprint,reproduction,copy(and looks like a copy)We did not make this manual it is a copy from the manufacturer. The manufacturer may or may not have included the info you're looking for.THANKS
steady rest 10" for logan lathe or similar
Rebuilt 10" steady rest Im pretty sure its for a Logan lathe
Aloris BXA tool post and holders,south bend lathe,logan lathe,sheldon lathe
Aloris BXA tool post and 7 holders. 2) bxa2 facing and turning holders.Bxa4 boring bar holder,bxa7 cut off holder,bxa8 threading tool,bxa6 extra deep holder and bxa16 carbide insert tool holder Posted with
H J WILLIAMS N-30-RH CUT-OFF TOOL HOLDER AND BLADE ATLAS SOUTH BEND LOGAN LATHE
H J WILLIAMS N-30-RH CUT-OFF TOOL HOLDER AND BLADE. THE TOOL HOLDER IS USED. THE BLADE IS NOS NEVER BEEN USED. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. ... moreI WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
ATLAS 618 CRAFTSMAN 6" LATHE FACEPLATE DOG 1" CAPACITY SOUTH BEND LOGAN
ATLAS 618 CRAFTSMAN 6" LATHE FACEPLATE DOG 1" CAPACITY NO BREAKS OR REPAIRS EXCELLENT. THE DOGS I HAVE LISTED ARE NOT BEAT-UP AT ALL. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE ... moreREAD MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
Logan Lathe Model 830 Bull Gear Very Good Condition
Ver nice Logan 830 bull gear. Teeth are perfect.
LOGAN LATHE 200 SERIES 9 INCH APRON
LOGAN LATHE 9 INCH 200 SERIES APRON. NICE CONDITION EXCEPT MISSING CARRIAGE TRAVERSE HANDWHEEL. EXPLODED VIEW PICTURE FROM CATALOG NOT INCLUDED IN SALE
Logan 11" Lathe Bull Spindle Back Gear LA-1003 and Pin
90 Teeth. 16 DP Face 3/4" OD 5.745" ID 1.875" 3/16" Key Please visit our website. Lostcreekmachine.com To see more tooling from Lost Creek Machine. Check out my! If we can combine more than one small item shipping may be less. Illinois residence and anyone picking tools up at the shop must pay 6.5% sales tax unless the proper forms are provided. We accept Visa. MasterCard, Discover, and PayPal. If you have a question call us M-F 8-5 CST and Saturday 8-Noon, 815-434-5897. You can email us anytime
VERY NICE ORIGINAL LOGAN 10" LATHE CENTER STEADY REST
Very Nice- Original center steady rest for a Logan 10" lathe. Interior diameter is 3 1/4" Unit retains original paint and clamp assembly. Measurement from the center of the v groove to the outside edge of the base is 4 1/4" No cracks or repairs noted. In very fine order. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
6" Atlas Craftsman Lathe Shaper 1/4" HSS Tool Bits South Bend Logan
Up for auction today is 12 high speed steel 1/4" tool bits for a lathe. Shaper or mill. They come as shown. If you win multiple items, I will combine shipping, and send a revised invoice after auctions are over. If you think the shipping price is too high, please email me for a shipping quote. Ebay has really changed their system, and forces us to put in weights, and sometimes the shipping prices that show up on the page are too high. Thanks for looking*
LOGAN LATHE BACK GEAR ASSY. 11 INCH 1900\900 SERIES LATHES
LOGAN LATHE 11 INCH MODEL BACK GEAR. THIS HAS BEEN REPAIRED BUT APPEARS TO BE A DECENT JOB. TOOTH COUNT 80\30. PART NUMBER LA 1006. NEW PART NUMBER FROM LOGAN ACTUATOR LP 1192. $453.09, FROM 10 YEAR OLD PRICE SHEET. I DON'T KNOW IF IT IS AVAILABLE ANY MORE.
LOGAN lathe carriage faceplate 04TLC 700A
This is the face plate. I wire wheeled the outside mounting surfaces of it and came out pretty good. Thanks for looking and if you need any other part off this tool let me know and I will try to list it or work something out with you. I have seen these broke in half because someone dropped there tool. Note: this is cast iron
LOGAN lathe saddle Carriage frame Top 04TLC 700A
carriage frame for the logan 04TLC 700A. I didnt clean this part up yet. I wanted to get it on tonight. The ways on the bed were in very good condition. These on this part have some fine scratches. Please look at the photo, on the top end there issome metal missing, have no idea afrom what but does not affect the function of carriage. One of the wiper foam holders is gone(shown in photos. These get really messed up just from using the lathe from parts. If yours is all gouged up real bad, this is a good replacement. If any questions, please ask, I will do my best to answer to the best of my ability. Thank you and good luck.
LOGAN 10" MODEL 820 LATHE SADDLE RETAINERS WIPERS & FELTS SET
Saddle wipers and felts assembly for a Model 820 Logan 10" lathe. Includes all four wipers. Felts and drive screws. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Lathe Chuck Key Machinist Tool Leblond Southbend Logan Monarch Etc
See pics of actual chuck key you will receive. Some where around.46" square but varies depending on where it is at. Posted with
Metal Lathe L-W CHUCK Co. 3 jaw 7 1/2 ,south bend,atlas ,logan lathe,1-1/2"-8tpi
heavy duty 7 1/2 inch L-W Chuck Co. 3 jaw chuck has inside and outside jaws and key clean scrolls good heavy approx 28 lbs 1 1/2-8 tpi mount Made in Toledo Ohio USA do not need it so selling used so not perfect not sure of age please look at pics. that is what they are for and are part of description DON'T MISS OUT BUY NOW
Logan 10" Lathe Drive Box Countershaft Hinge Bracket LA-353-1
Removed from a Logan model 200. 10" lathe. No breaks cracks or repairs. Comes as shown.
LOGAN LATHE COMPOUND PART FOR LATHE # 1810
This listing only includes what is pictured.
Logan 10" Lathe Drill Press Milling Machine Steam Flat Belt Countershaft Pulley
Removed from a Logan model 200 lathe. Good used condition. 3/4" wide sheaves. 8 1/2" 10" dia. sheaves, 3/4" bore, May be useful for many other applications. Comes as shown.
Logan 11" Lathe Apron Carriage Handwheel Handle LA-122
5" Diameter 1/2" Bore. 1/8" Key It is used and will need cleaned up. all steel not pot metal
Morse Twist Drill No.5 & 6 Taper Plug Gages Male & Female South Bend Logan Lathe
Morse Twist Drill& Machine Co. No.5& No.6 tanged taper plug gages male and female set. Due to the size and weight(35.5 lbs) these will ship in two USPS Flat Rate Priority Boxes to save on shipping cost. Please wait for invoice for correct shipping total. Ebay's calculator is not always accurate. Shipping includes insurance if needed. If you have any questions. Please ask, all emails will be answered. Please study the pictures and description for condition. There are no refunds or returns unless there is an error in the listing. PayPal only. Payment due within 3 days of close of auction. No international shipping. Shipping to 48 states and Alaska only. If you have any problems with your purchase. Please email before leaving feedback. I will gladly take care of any problems. Thanks.
logan lathe/shaper sales publication circa 1956
logan lathe 23 page sale's pub. circa 1956 cover's lathes.Shapers, accesories very good condition, international shipping extra.
logan lathe price sheet circa 1956
logan lathe price sheet circa 1956 excellent condition 4 pages.International shipping extra
VERY NICE ORIGINAL LOGAN 10" LATHE COMPLETE TAILSTOCK & CLAMP ASSEMBLY
Very Nice- Complete original tailstock assembly for a 10" Logan lathe. MT2 tapered bore is very nice. Ram indicators are clear and legible. Very little to no backlash noted. Includes original clamp and hardware shown. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
ATLAS CRAFTSMAN LOGAN SOUTH BEND LATHE PIPE BULL BALL BEARING CENTER #2 SHANK
ATLAS CRAFTSMAN LOGAN SOUTH BEND LATHE PIPE BULL BALL BEARING CENTER#2 SHANK Click to Enlarge Click to Enlarge Click to Enlarge NICE 2 3/4-1/2 DIAMETER TAPERED BULL/PIPE LIVE CENTER WITH#2 MT SHANK. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
Logan lathe toolpost for 10 or 11 inch
Lantern toolpost for a 10 or 11" Lathe. Condition is good. Shipping is FREE to U.S. Thanks Mike
1/2" LATHE DRIVER DOG TOOL 4 ATLAS CRAFTSMAN SOUTH BEND LOGAN MACHINIST
Very nice lathe dog. 9/16" interior diameter. 1 3/4" long leg. In good order. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
MACHINIST TOOLS LOT-STARRETT 445 FLAT BLADES LUFKIN-SOUTH BEND LATHE ATLAS LOGAn
MACHINIST TOOLS LOT-STARRETT 445 FLAT BLADES LUFKIN-SOUTH BEND LATHE ATLAS LOGAn 1 Lot of Assorted Machinist Tools… Lots of nice stuff here… Details: 1) 0-1” Lufkin Micrometer 1) 1-2” Lufkin Micrometer 1) Federal Dial Test Indicator.0001” 1) misc feeler gauge 1) Starrett Depth Mic#445(no case) FLAT BLADES! 6 blades to 6” 1) Starrett Thread gauge#6 1) Starrett Fillet/Radius gauge#272A 1) Starrett Center gauge for threading#C391 1) Starrett Taper gauge 269B 1) Starrett Toolmaker’s Square 1) Lufkin 6” rule 4) Dividers/Calipers 2 Starrett. 1 Lufkin, 1 Brown Sharpe 1) Jacobs 7B Chuck 0-1/4” Straight Shank w/key 1) Supreme Chuck 0-1/4” Straight Shank w/key 1) Edge/Center finder for milling machine NO RETURNS ON THIS LOT Thanks for looking and Good Luck! SEE OUR OTHER AUCTIONS FOR MORE! DB— gsrx_vers_526(GS 6.6.6(526)
PALMGREN 250 MILLING ATTACHMENT FOR LATHE - LOGAN, ATLAS - CHERRY!
A1- Photo Item Description: PALMGREN 250 MILLING ATTACHMENT FOR LATHE. This is a 1946 vintage attachment. I got it with my Montgomery Wards/Logan lathe. And when I restored the lathe I restored all the rests, and other tooling including this Palmgren attachment. I did a light but meticulous restoration on this and finished it in the early dark blue-gray Logan paint. I don't think this was used much if ever- it is cherry. Returnable if not happy. Read my full terms below) Ships to lower 48 Cont. States- USA only. Use Ebay Shipping Calculator for Shipping Quote- quote is for lower 48 Cont. US ONLY. By bidding you are agreeing to my Auction and Shipping Terms Please email with any questions or comments. Auction Terms: I have described the item as accurately as possible and to the best of my ability. I would much rather you not place a bid ... moreon the item than be disappointed with it. So please read the entire description and view all the photos thoroughly before bidding. Feel free to contact me with any questions or concerns you have with an item. When possible I will take additional pictures of an item if you request it. Payments must be received within 3 days of auction ending. I do not accept personal checks. Item is sold as-is with 14 day return privilege. Buyer pays all shipping costs. Shipping costs are not refundable. Item must be returned in same condition as sent. Lost or damaged returns will not be refunded. So I urge you to pack the item well and insure it adequately. Shipping Terms: I will pack your item very carefully. Please allow at least 7-10 days to receive your item from date of actual shipment. I reserve the right to change the shipping carrier. This is simply because the item is not packed until it is sold. So the quote is based on a best guesstimate of size and weight. You will not be charged more than quoted. But your item may arrive via UPS or FEDEX instead of US Post, or vice-verse. Priority shipments will remain Priority shipments. I generally ship items within 48 hours of payment. If y
VINTAGE CRAFTSMAN 8" FACEPLATE W/LATHE DOGS FITS CRAFTSMAN SOUTH BEND LOGAN
CRAFTSMAN FACE PLATE W/LATHE DOGS. Fits Lathes with 1 1/2"8 thread. Size 8" Comes with Two 1" 1/2" Armstrong Lathe Dogs. Model 25238-103 Face Plate is in good used condition. Check out my!
CUSHMAN 5" LATHE CHUCK SOUTHBEND LOGAN COLCHESTER CLAUSING ATLAS
THE CUSHMAN/SOUTH BEND 5" THREE-SELFCENTERING CHUCK. By The Cushman Chuck CO. Hartford.Conn USA. Extra set of Jaws Comes with a removable back mounting plate of 1 1/2"8 Cuck is in good used condition. Check out my!
Craftsman no. 2198 Threading Tool Holder Atlas South Bend Logan Lathe
Craftsman no. 2198 Threading Tool Holder 9" 12" Swing Metal Lathe in excellent working condition. Tool is 3/8" thick 3/4" high and 5 1/2" long end to end This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but please wait for me to invoice you before you pay since ebay charges 10% on shipping fees and I will be on the phone for hours with them getting them to combine the shipping for me which they dont like to do since they lose money.
Logan lathe 2 step carriage stop
Bought for use on a Logan 12" lathe to make special shoulder bolts but I never used it. Originally by gunsmith to shoulder barrels but appears to have been little used or was very well taken care of. Very clean. Should fit smaller Logan lathes. May fit other small lathes as well. Original differential with square head bolts is around 1/2 inch but differential can be extended using various 1/4" fine threaded socket head bolts(one included as shown in last picture) Flips in either direction. I.e. can be used in front or behind the carriage as you choose. As Is. Packed and shipped USPS priority for $7.00. Continental US only.
LOGAN LATHE REVERSE GEAR LEVER ASSY. FOR THE 11 INCH 1900/900 SERIES.
11 inch LOGAN LATHE REVERSE GEAR ASSY. TINY CRACK IN LEVER DOESN'T EFFECT USE. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-144d79918d6-0x106-
Logan Lathe Carrige Hand wheel LA-122 Southbend Atlas
Up for auction is a Logan lathe carrige hand wheel in very good condition. The diameter is 5 inches. The hole is 1/2 inch, and the key slot is 1/8 inch. I am always happy to combine shipping. Thank you.
Logan Lathe Drive Box LA-374-2 And Countershaft racket LA-340
Up for auction is a Logan lathe drive box P/N LA-374-2 with countershaft bracket LA-340 in very good condition. Comes as shown. I am always happy to combine shipping. There is a handling fee of $1.05 to cover the cost of tracking. Thank you.
LOGAN, Lathe, front spindle ring
Logan Metal Lathe. Good condition, front spindle ring for 1-1/2 nose; I ship very fast, in 24 hrs. or less 5-1/2 days a week. USPS.
LOGAN METAL LATHE TOOL 72-T CHANGE GEAR
DESCRIPTION: USED. 72-T GEAR. NO MISSING TEETH. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ... moreITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST TOOLS;VINTAGE TOOLS
VITNAGE LOGAN METAL LATHE CHANGE GEAR BRACKET WITH SPINDLES
DESCRIPTION: USED. CHANGE GEAR BRACKET FOR THE LOGAN METAL LATHE. THE BORE IS 1 3/4 APPROX. NO CRACKS OR REPAIRS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE ... moreMAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALK
LOGAN METAL LATHE TOOL POST SLIDE SWIVEL BALL CRANK MACHINIST TOOL
DESCRIPTION: USED. BALL CRANK FOR THE LOGAN METAL LATHE TOOL SLIDE SWIVEL. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MA
Logan Lathe Underdrive 4 Step V Belt Pulley Set W/ Pillow Block Bearings
All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. International Bidders Please Inquire About Shipping Cost Prior To Bidding SOTTOF SALES This came from a Logan 10" or 11" lathe with a underdrive cabinet. Some rust from years of storage, bearings may need to be replaced as they feel tight. The shafts on both are 3/4" dia. and the step pulleys are heavy duty steel construction. The steps are approx. 3 1/8" 3 3/4" 4 1/4" 4 3/4" You could use this assembly to replace a variable speed drive that is worn out or re purpose for something completely different. Comes as shown. D4119.26 EBAY AUCTION POLICIES: Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased ... morewithin seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
6" Southbend Atlas logan delta rockwell 4 jaw metal lathe chuck 1" 1/2-8 tpi
Selling a 4 jaw chuck from a Logan 10" metal lathe. This is a 6" chuck with reversible jaws. It has 1 1/2"8 TPI spindle threads.These threads are in good shape. No dings or nicks on them or the mount shoulder.
5 1/2" DOG DRIVE FACEPLATE ATLAS SOUTH BEND LOGAN LATHE 1 1/2"-8 THREADED MOUNT
This beautiful 5 1/2" drive dog faceplate came off a Logan lathe. It has a 1 1/2" x 8tpi mount. It is in excellent condition.
6" DOG DRIVE FACEPLATE ATLAS SOUTH BEND LOGAN LATHE 1 1/2"-8 THREADED MOUNT
This beautiful 6" drive dog faceplate came off a Logan lathe. It has a 1 1/2" x 8tpi mount. It is in excellent condition. Clean threads, no dings on the mount shoulder.
LOT OF 15 METAL 1/2" CUTTING TOOL BITS 4 LOGAN SOUTH BEND LATHE
Nice- Lot of fifteen(15) 1/2" metal cutting bits. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-144dd7feb5d-0x112-