In 
 
Order by: 
Available to: 
Price: 
 - 
$
19.99
Buy It Now
$4.25 Shipping
Condition: Used
Location: Nashville, United States
As shown, in good used condition showing minimal wear.
$
24.99
Buy It Now
$4.25 Shipping
Condition: Used
Location: Nashville, United States
As shown, in good used condition showing minimal wear.
$
75.00
Buy It Now
$8.00 Shipping
Condition: Used
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. EXCELLENT ... moreGraduated for 0 to 100. ding or mark on everything.
$
100.00
Buy It Now
$11.00 Shipping
Condition: Used
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. The last pic ... morenot sure how valid it is because of the threads.
$
27.99
Buy It Now
$8.99 Shipping
Condition: Used
Location: Temecula, United States
DESCRIPTION: USED. 2 STEP MOTOR PULLEY FOR THE LOGAN METAL LATHE. THE STEPS MEASURE 2 1/4- 4 1/4. THE BORE IS 1/2" CLICK ON THE" SHIPPING AND ... morePAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AN
$
28.60
22h 27m 22s
0 bids
$68.55 Shipping
Condition: Used
Location: Philadelphia, United States
Nice- Original rocker type tool post and tool post wrench assembly for a Logan 9" or 10" lathe. Tool post base is 1 3/8" x 1 3/8" ... more5/16" thick. Tool post body diameter is 1" Stands 3 1/4" to the shoulder. Interior post dimensions are 7/16" wide x 1 5/8" with the washer and rocker in place. Bolt is removable from body. 3/8" tool post wrench is also included. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
49.95
Buy It Now
$15.00 Shipping
Condition: Used
Location: Uxbridge, United States
Up for auction is a Logan 10" lathe rear back drive/ motor to leg or pan bracket. Please look at the photo for condition I can email more pictures ... moreupon request. Thanks for looking. Posted with
$
24.99
Buy It Now
$4.25 Shipping
Condition: Used
Location: Nashville, United States
As shown, in good used condition showing minimal wear.
$
75.00
Buy It Now
$8.00 Shipping
Condition: Used
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. ding or mark ... moreon everything. If I can not then I must take pictures of everything.
$
150.00
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
Free shipping to the lower 48 United States
$
35.00
Buy It Now
$15.75 Shipping
Condition: Used
Location: Paramus, United States
I believe this is a model 200 lathe. used condition, shows signs of use.
$
27.34
Buy It Now
$10.12 Shipping
Condition: New
Location: Canada
$
24.95
Buy It Now
$9.59 Shipping
Condition: Used
Location: Waterford, United States
Very Nice- Original Logan tailstock wrench for a Logan 10" Model 820 lathe. Hex is 15/16" All in fine order. As shown. Always combine shipping- ... moreIf you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
100.00
Buy It Now
$8.00 Shipping
Condition: Used
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. ding or mark ... moreon everything. If I can not then I must take pictures of everything.
$
45.00
Buy It Now
$147.91 Shipping
Condition: Used
Location: Farwell, United States
I got this lathe from a scrap yard and parted it out. All the parts that I have for it are listed. This part is in used condition. Help yourself to a ... moregood deal! are used, unless otherwise specified.
$
275.00
Buy It Now
$18.00 Shipping
Condition: Used
Location: Mahwah, United States
Ding or mark on everything. If I can not then I must take pictures of everything. I will extend to you the following as my father did. I am not cleaning ... moreanything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now.
$
17.99
Buy It Now
$4.85 Shipping
Condition: Used
Location: Nashville, United States
As shown, in good used condition showing minimal wear.
$
210.00
Buy It Now
Free Shipping
Condition: New
Location: Lake Villa, United States
16/32 tooth gear for QCGB on Logan Lathe. Gear teeth are Precision machined. These are made of steel with a bronze bushing.
$
39.95
Buy It Now
$8.95 Shipping
Condition: Used
Location: Paramus, United States
Used condition. they fit good on the lead screw with no excessive play.
$
125.00
Buy It Now
$19.82 Shipping
Condition: Used
Location: Paramus, United States
Used condition, shows signs of use. I did not see the lathe run under power, the front bearing turns good. feel like it may be slightly rough. the rear ... morebearing barely turned, its not included. I believe this is a model 200 lathe.
$
60.00
Buy It Now
$12.00 Shipping
Condition: Used
Location: Mahwah, United States
Ding or mark on everything. If I can not then I must take pictures of everything. I will extend to you the following as my father did. I am not cleaning ... moreanything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now.
$
74.95
Buy It Now
$18.40 Shipping
Condition: New
Location: South El Monte, United States
Bonded together with friction and skim coats. The fabrics most commonly used are nylon, cotton duck. SOUTH BEND, LOGAN, ATLAS FLAT DRIVE BELT, CUSTOM ... moreCUT, LATHES, MILLS, OR ANY OTHER MACHINES, CAN BE USED FOR OTHER APPLICATIONS.
$
14.99
Buy It Now
$4.10 Shipping
Condition: Used
Location: Neptune, United States
$
7.99
Buy It Now
$3.85 Shipping
Condition: Used
Location: Nashville, United States
$
325.00
Buy It Now
Free Shipping
Condition: Used
Location: Yorktown, United States
$
70.00
Buy It Now
$17.90 Shipping
Condition: Used
Location: New Hyde Park, United States
Logan 200 10” Machinist Metal Lathe Banjo Mint Condition.
$
20.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
Logan Lathe Models 815 & 820. It does not contain any instructions or maintenance information. It contains 17 pages. For Models : 815 & 820. About this ... moremanual : This is a high quality reproduction manual which has been scanned with a high resolution scanner.
$
19.99
Buy It Now
$4.25 Shipping
Condition: Used
Location: Nashville, United States
As shown, in good used condition showing minimal wear.
$
145.00
Buy It Now
$18.10 Shipping
Condition: Used
Location: Paramus, United States
I believe this is a model 200 lathe. check all pics.
$
25.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
Logan 10" Lathe 200 Series Instruction& Parts List Manual For models: 10" Models 200. 201, 210, 211 Description: This is a Instruction and ... moreParts List Manual for the Logan 200 Series Lathes. It has sections on: Lubrication. Operation, Chart of Threads& Feeds, Parts Section with Exploded Parts Views. The manual has 40 pages. To inspect the quality of the manual, and to view select pages, please click on the gallery images above to enlarge. Includes sections on: Lubrication Operation Maintenance Belt Adjustments Chart of Threads& Feeds Belt Lacing Tool Bits Exploded Parts Views Parts List Number of pages: Approx 40 Condition: Very Good Publication date: N/A Publication No. N/A Added Notes: Due to others making copies of this manual for resale. I have added a light watermark on select pages to discourage this practice. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 About This Manual: This is a high quality reproduction manual which has been scanned with a high resolution scanner. Each page is then digitally edited in Photoshop to remove grease marks. Fingerprints, writing, and other imperfections that the original manual may have had. It is then printed on 24 lb heavy paper and 65 lb cardstock for the covers with a 600 DPI LaserJet printer. The result is a clean and durable manual which many times is better than the original and should last many years in your shop. Questions? Email: eugene@fabersurplus.com Phone: 316-210-4079 after 11:00 am Central Time Ships USPS First Class Free or Upgrade to Priority Mail for faster delivery. Sales tax charged for Kansas sales. See my for more manuals
$
24.95
Buy It Now
Free Shipping
Condition: Used
Location: Neptune, United States
You get the one you see in the pictures.
$
14.99
Buy It Now
Free Shipping
Condition: New
Location: Naperville, United States
Welcome to Old Time Service Manuals! You are bidding on a digital reproduction of a genuine Logan 10" Lathe Models 200. 201, 210, 211 Owners Manual. ... moreIt contains a professionally reproduced copy of all the original Specifications. Parts Lists, Schematics, etc. that were included back in the days of yore when machinery was meant to last! Unfortunately. The machines themselves have outlasted many of the original service manuals(these are becoming rarer and harder to find as time goes by) Our goal here at Old Time Service Manuals is to offer a fabulous reproduction of out of print owners and service manuals at an affordable price. Each manual has been digitally reproduced and"cleaned up" by a professional computer artist to achieve the best results possible with the existing data available. The end result is a"new" manual(you get everything that you see in the pictures) in a looseleaf format. Including 3-hole punch so that you can store and organize your pages into binders. I will also include any additional extras, pages, ads, etc. that came with the originals. Some of these extras are a fun stroll down memory lane! This particular manual contains 42 pages total. This is a nice deal for someone looking for one of these hard to find manuals. These would also make a special gift without breaking the bank. Shipping is FREE in the continental United States and I will be sure to ship this item within 24 hours of your purchase. Feel free to email me with any questions that you may have or if you are looking for a particular manual that you cannot find. I will be constantly adding and updating my library. Thanks for looking and come back to visit us again in the future!
$
17.50
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
Untitled Document Free. Fast Shipping Every Business Day! Logan 9B Series Metal Lathe Instructions Manual Click for Our Complete Catalog Manual Description: ... moreNumber of Pages: 12 This is a reproduction. Not a photocopy, of an original Logan 9B Series Metal Lathes Instructions Manual. This manual contains information on lubrication, maintenance, adjustments, spindle speeds, wiring diagrams, operations, and controls. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I may have more than one manual that covers your machine. And I am adding new manuals all the time. I do not carry additional parts for machinery. Except for what is listed.
$
17.50
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
It has 12 pages. Logan 14" Lathe Model 6560. For Models : 6560. Setting Up the Lathe. The Lathe Bed. Lathe Centers. About this manual : This is a high ... morequality reproduction manual which has been scanned with a high resolution scanner.
$
250.00
Buy It Now
$16.10 Shipping
Condition: Used
Location: Bangor, United States
Reversible jaws …. fit snugly and move freely. It was used on a South Bend 9 but will fit any lathe with an 1 1/2”-8 spindle nose.
$
44.95
Buy It Now
Condition: New
Location: Saint Charles, United States
For back plate you would need to drill mounting holes and turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back ... moreplate more concentric with the lathe spindle and reach chuck's TIR.
$
29.99
2d 16h 52m 49s
0 bids
Free Shipping
Condition: Used
Location: Highland, United States
$
19.95
Buy It Now
Free Shipping
Condition: New
Location: Nashville, United States
What You See is What You Get!
$
24.00
Buy It Now
Free Shipping
Condition: New
Location: Franklin, United States
$
19.99
Buy It Now
$4.25 Shipping
Condition: Used
Location: Nashville, United States
$
16.50
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
Logan Lathe Model 19 55 Parts List Manual For models: 1955 Includes sections on: Parts List, Assembly breakdown, Includes Pub BUC-1A Number of pages: ... moreApprox 16 Publication No.N/A Publication/Revision Date: N/A Notes: Includes Publication BUC-1A Universal Chuck Installation and Maintenance Questions? Email: eugene@fabersurplus.com Phone: 316-210-4079 after 11:00 am Central Time Ships USPS First Class Free or Upgrade to Priority Mail for faster delivery. Reprinted from original manual using high quality 24lb paper and comb binding. Covers are printed from 65lb cardstock for extra durability. See my for more manuals
$
448.97
Buy It Now
$13.95 Shipping
Condition: Used
Location: Clinton Township, United States
The chuck looks great for the age. We do NOT have a key but the opening is for a 1/4" square key. We were able to turn the scroll with a 1/4" tool bit ... moreand it moves smoothly. As with all scroll chucks, a cleaning is always helpful.
$
150.00
Buy It Now
$39.20 Shipping
Condition: Used
Location: Hastings, United States
PT2542NLI or AS1960N3. Countershaft or underneath cabinet drive pulley & shaft. South Bend 9" 10K Lathe.
$
60.60
Buy It Now
Condition: New
Location: Saint Charles, United States
For back plate you would need to drill mounting holes and turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back ... moreplate more concentric with the lathe spindle and reach chuck's TIR.
$
99.99
Buy It Now
$9.99 Shipping
Condition: Used
Location: Carol Stream, United States
JACOBS HEADSTOCK CHUCK No. 58B 1-1/2" X 8TPI SOUTH BEND 9, ATLAS 10, LOGAN LATHE. Used condition with dings dents and scratches. Spins smoothly. Please ... moresee photos for details. Thanks for looking
$
49.99
Buy It Now
$11.00 Shipping
Condition: Used
Location: Medina, United States
Very unique lathe tool holders cut off. Made my Cleveland national Machine co and can be adjusted to many angles.
$
17.50
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
Logan Lathe Models 2525, 2527, 2555, 2557. It does not contain any instructions or maintenance information. It contains 17 pages. About this manual : ... moreThis is a high quality reproduction manual which has been scanned with a high resolution scanner.
$
24.99
Buy It Now
$4.80 Shipping
Condition: New
Location: Lima, United States
Wood turners may find this setup useful too! Capture gage between centers with bubble end straight up. T his tool fromAlisam Engineering, makes centering ... moreyour lathe tool to your lathes axis a quick and easy task!
$
17.50
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
This is a reproduction of an original Logan Lathes, Shaper and Accessories Catalog. This catalog contains a lot of Logan lathes and the 9" Logan Shaper. ... moreIt gives you specifications for each machine as well.
$
12.67
Buy It Now
Free Shipping
Condition: Used
Location: Warren, United States
$
189.00
Buy It Now
Condition: New
Location: Saint Charles, United States
For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck ... moreto make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
$
16.50
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
Logan Lathe Model 19 3 5 Parts List Manual For models: 1935 Includes sections on: Parts List, Assembly breakdown, Includes Pub BUC-1A Number of pages: ... moreApprox 17 Publication No.N/A Publication/Revision Date: N/A Notes: Includes Publication BUC-1A Universal Chuck Installation and Maintenance Questions? Email: eugene@fabersurplus.com Phone: 316-210-4079 after 11:00 am Central Time Ships USPS First Class Free or Upgrade to Priority Mail for faster delivery. Reprinted from original manual using high quality 24lb paper and comb binding. Covers are printed from 65lb cardstock for extra durability. See my for more manuals
$
2499.99
Buy It Now
Condition: Used
Location: Middlebury, United States
Modified for air-powered rest feed. Size: Length: 93 in. Width: 36 in. Height: 60 in. Prefer to pick it up yourself?. About 54" bed length. Weight (lbs, ... moreoz): 2300. Need it urgently?.
$
16.50
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
Logan Lathe Model 19 5 0 Parts List Manual For models: 1950 Includes sections on: Parts List, Assembly breakdown, Includes Pub BUC-1A Number of pages: ... moreApprox 16 Publication No.N/A Publication/Revision Date: N/A Notes: Includes Publication BUC-1A Universal Chuck Installation and Maintenance Also. Original had prices stamped as obsolete on 5 pages, see gallery pictures. Questions? Email: eugene@fabersurplus.com Phone: 316-210-4079 after 11:00 am Central Time Ships USPS First Class Free or Upgrade to Priority Mail for faster delivery. Reprinted from original manual using high quality 24lb paper and comb binding. Covers are printed from 65lb cardstock for extra durability. See my for more manuals
$
20.00
Buy It Now
$3.00 Shipping
Condition: Used
Location: Mahwah, United States
I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. If you want ... morea bunch of "gears" then sure we can talk but for one or two.
$
74.99
Buy It Now
Free Shipping
Condition: Used
Location: Anderson, United States
In good working condition, but has scratches, signs of use, dings, rust and surface marks. NO KEY INCLUDED.
$
17.50
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
Untitled Document Free. Fast Shipping Every Business Day! Logan 1900 Instructions Manual Manual Description: Number of Pages: 11. This is a reproduction ... moreof an original Logan 1915. 1917, 1920, and 1922 Lathe Instruction Manual. This manual contains information on adjusting the belts and countershaft, the back gears, spindle speeds, threading chart, gear change for the quick change gear box, oiling, and a wiring diagram. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I may have more than one manual that covers your machine. And I am adding new manuals all the time. I do not carry additional parts for machinery. Except for what is listed. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
60.00
Buy It Now
$7.95 Shipping
Condition: Used
Location: Sunnyside, United States
Lathe Spindle Nose Thread protector and collet adaptor remover. For any spindle with 1-1/2" -8 threads. Logan, Atlas, Craftsman, Clausing, Southbend.
$
15.00
Buy It Now
Free Shipping
Condition: Used
Location: Manteno, United States
Rivett 7/16" 5C collet More collets and other machine tooling in my other listings Thanks for looking
$
92.02
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
| | | | | | | Allindustrial.com Part# ALL-47201, For use on lathes with a 10-15" swing(defined as the diameter that can be turned over the bed) Precision-engineered ... moreto assure repetitive accuracy, Quickly and easily installed on an engine. Bench, or turret lathe for a wide range of operations, Slash Your Setup Time- instant changing from one operation to another! Fully interchangeable with Aloris. Dorian, Phase II, Yuasa, and most other manufacturer components(BXA series only) All working parts precision ground and hardened, Completely sealed for maintenance free operation! Turning: The unequaled rigidity of this toolpost and holders(also available) insure smoother turning without chatter or vibration! Rigid wedge design. Easily centered! Looking for more? Additional BXA holders. Tool posts, sets, collets, and the very best lathe tooling values are available in the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote We combine shipping! Purchase via Buy-It-Now and we'll send you a combined shipping invoice) 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will b
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
 In 

Former Listings  
 
LOGAN LATHE 10" MODEL 200 DRIVE BOX ASSEMBLY
THIS IS THE DRIVE BOX ASSEMBLY FROM A MODEL 200 10" LATHE. THIS FITS OTHER MODELS AS WELL.THIS INCLUDES MOTOR MOUNT.COUNTER SHAFT,CONE PULLEY,STEP PULLEY. THE YOKE THAT HOLDS THE COUNTER SHAFT WAS BROKEN AND REPAIRED AT SOME TIME AND IT WORKS FINE. THIS MUST BE PICKED UP. GOOD CONDITION. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
Metal Lathe OTC 6" 3 Jaw Scroll Chuck 1 1/2" X 8 tpi South Bend Logan Atlas
6" 3 Jaw Scroll Chuck 1 1/2" X 8 tpi THIS CAME FROM A METAL SHOP THAT RECENTLY CLOSED DOWN. TAKE A LOOK AT THE PICTURES TO SEE SOME SPECKLING ON THE METAL. SCRATCHES, SCRAPES AND DISCOLORATION. COMES WITH ONLY WHAT'S SHOWN IN THE PICS GUARANTEED IN GOOD WORKING CONDITION. CALL. EMAIL OR TEXT JOE AT(860) 348-JOEY(5639) WITH ANY QUESTIONS PURCHASE ORDERS ARE NO PROBLEM! WE ACCEPT: THROUGH USE PROPAY TO PAY WITH ANY MAJOR CREDIT CARD. THERE'S NOTHING TO SIGN UP FOR AND EBAY BUYER PROTECTION IS INCLUDED. EBAY DOES ALLOW PAYMENT BY CHECK FOR SOME ITEMS. FEEL FREE TO CALL WITH QUESTIONS ABOUT PAYMENT. 860) 348-5639 JOE- WE GUARANTEE the item you purchase is in the condition advertised as reasonably described above. WE STAND BY EVERYTHING WE SELL and will do all we can to make sure you're fully satisfied with your purchase. ... moreAny discrepancies or defects should be reported to us promptly. FDA DISCLAIMER THE SALE OF THIS ITEM IS NOT REGULATED BY ANY FEDERAL OR STATE AGENCY AND ANYONE IS WELCOME TO PURCHASE IT. HOWEVER THE DISCLAIMER BELOW IS REQUIRED FOR ALL ITEMS LISTED IN CERTAIN EBAY CATEGORIES. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
NICE ORIGINAL BUCK 6" 4 JAW REVERSING CHUCK 4 LOGAN SOUTH BEND LATHE 1 1/2" x 8
Nice- Original Buck Tool Co. 6" 4 jaw chuck with reversing jaws. Stamped"Made in U.S.A. Buck Tool Co. Kalamazoo 444 and 127" Chuck is 2 1/16" thick. Thread mounting diameter is 1 1/2" 8 TPI. Threads are in fine order. Unit was acquired without key. Operates smoothly throughout range. In fine order, all as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE ORIGINAL LOGAN 8" FACE DOG PLATE TOOL 4 LATHE 1 1/2" 8 TPI PART K2
Nice- Original Logan 8" diameter face plate. Thread mounting diameter is 1 1/2" x 8 TPI. Threads are in fine order. Outside thickness 13/16" Stamped K2. Nice heavy driver plate, in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
11/16" Square Armstrong No 3 Lathe Wrench Southbend Logan Atlas LeBlond Clausing
11/16" Square Armstrong No 3 Lathe Wrench Southbend Logan Atlas LeBlond Clausing This item qualifies for eBay Fast N Free- 1 day handling and free domestic shipping with USPS Priority Mail. We care enough to take multiple pictures of our items for sale and all pictures are of the actual item for sale. This item is ready to be shipped upon your purchase. Please email us if you have any questions on this item. All pictures are of actual item for sale. This item was working inventory at a large semi-conductor manufacturer and is sold with a 14 day not DOA satisfaction guarantee. cmb_gsrx_vers_525(GS 6.6.5(525)
8" CRAFTSMAN 4 JAW CHUCK for Atlas Craftsman South Bend Logan lathe 1 1/2"X8
This listing is for a 8" Craftsman 4 jaw independent chuck. It is 1 1/2" X 8tpi. The threads for the screws have a few teeth chipped off at the ends(see photos) The face of the jaws show wear(see photo) I do not have the key. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
4" 3 JAW CHUCK for Atlas Craftsman South Bend Logan lathe 1 1/2"X8
This listing is for a 4" 3 jaw scroll chuck. It is in great shape. It is 1 1/2" X 8tpi. It comes with only the one set of jaws and no key. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1442db4fa3e-0xf3-
FURNAS A-14 FWD/OFF REV SWITCH for Atlas South Bend Logan lathe mill
This listing is for a Furnas A-14 fwd/off/rev switch. It functions properly. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
LOGAN LATHE "PEG LEG" MOTOR SUPPORT LEG CAST IRON ATLAS CRAFTSMAN LATHE
LOGAN LATHE"PEG LEG" MOTOR SUPPORT LEG CAST IRON. 29 3/4" TALL I CAN'T FIND ANY CRACKS BREAKS OR REPAIRS. THE RUST ON THE BOTTOM IS JUST SURFACE RUST. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. ... moreAnd happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-1442db4fa75-0x100-
#2MT CRAFTSMAN ARBOR for Atlas Craftsman South Bend Logan lathe
This listing is for a#2MT Craftsman arbor#21522. It is in great shape. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
11" Logan Lathe Tailstock Base
Logan 11" tail stock base. Great condition. You can save a bunch of money by buying a 10" tailstock and using this 11" base for your 11" lathe
10" 11" 12" Logan Lathe Threading Dial
Good condition threading dial that will fit 10" 11" and 12" Logan Lathes. I think this will also fit a South Bend lathe. Brass gear is in good condition and it spins freely. Shipping is $5 flat rate
SOUTH BEND ATLAS CRAFTSMAN LOGAN 3 JAW LATHE CHUCK 1 1/2-8 THREAD
SPECS. ENCO(253) KEY INCLUDED 4 5/16 O.D. BODY 15/16 THRU HOLE 1 1/2-8 WITH 1.530 C/BORE X 5/16 DEEP CHUCK BODY 2 5/16 LONG PLUS 1 1/4" THICK BACK PLATE 2 SETS JAWS OUTSIDE JAWS MARKED 253 MATCHED SET. INSIDE JAWS MARKED 872(SET) 3 JAW HAS ONE CHIPPED THREAD. MUST HAVE REPLACED JAWS AT ONE TIME FOUND 253#3 JAW WILL INCLUDE. THE CHIPPED#3 IS ON THE FIRST THREAD WOULD ONLY LIMIT MAXIMUM OPENING. ALSO WHEN"TIMING" JAWS SKIP FIRST REV AND THEN ENGAGE#3 ON SECOND OR USE 253/3 JAW. VERY NICE QUALITY IMPORT CHUCK. I WOULD GUESS A VERY OLD ENCO. DIS-ASSEMBLED; GOOD SCROLL AND PINIONS; SMOOTH OPEN AND CLOSE. JAW"TEE" SLOTS AND JAWS VERY NICE. VERY GOOD 1 1/2-8 THREAD, BACKPLATE. I LEFT GREASE ON SCROLL AND PINIONS. SEE PHOTOS AND EMAIL WITH QUESTIONS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1442dde5778-0x105-
LOT OF 10 COLLETS 3C for Atlas Craftsman South Bend Logan lathe
This listing is for a lot of 10 collets. They are all 3C. The sizes are(2) 1/32. 1/16, 5/32, 2) 3/16, 7/32, 1/4, 3/8, and 1 with no size or name on it. 8 are Hardinge, 1 Precision, and one with no name. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1442e0022fa-0xf7-
LOT OF 12 CENTERDRILLS for Atlas Craftsman South Bend Logan lathe
This listing is for a lot of 12 centerdrills. They range in size from#2. E-1#8 and 22. Names include Cleveland, Morse, Craftsman, and others. Some have only 1 good end. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
VERY NICE CONDITION ORIGINAL LOGAN 10" MODEL 200 LATHE THREAD DIAL INDICATOR
Very Nice- Original Logan thread indicator dial for a Logan 10" Model 200 lathe. Indicator dial is sharp and legible. Mounting bolt and washer are included. Retains original paint. In very fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
VERY NICE ORIGINAL LOGAN 9" 10" LATHE 18 TOOTH THREADING CHANGE STUD GEAR
Very Nice- Original Logan 18 tooth stud change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick. Outer diameter is 1 1/4" Teeth are all in very fine order. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
VERY NICE ORIGINAL LOGAN 9" 10" LATHE 72 TOOTH THREADING CHANGE GEAR
Very Nice- Original Logan 72 tooth change gear for a 9" or 10" Logan lathe. Single 5/32" keyway. 5/8" bore, 7/16" thick, 4 5/8" outer diameter. Teeth are all in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
VERY NICE LOGAN 10 MODEL 1875 LATHE COMPOUND BASE AND GIB LA747
Very Nice Condition Logan 10" Model 1875 Lathe Compound Base and Gib. Compound Base part number LA747. And Gib part number LA749. Includes Set Screws. This came from a machine that was lightly used and still retains original paint. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-144313fb37f-0xd8-
VERY NICE ORIGINAL 820 200 LOGAN 10 LATHE SADDLE HANDWHEEL 3" DIAMETER LA-299
Very Nice- Original saddle handwheel for a Logan 10" lathe. Interior bore is 3/8" with 1/16" keyway. Logan part number LA-299. Diameter is 3" In very fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
NICE LOGAN 10" MODEL 820 200 LATHE REVERSE TUMBLER PINION STUD PART LA-144
Original reverse tumbler pinion stud with oilless bearing and nut for a 10" Logan Model 820 or 200 lathe. Pinion stud is part number LA-144. All in good order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LATHE STEADY REST, lathe center rest,Logan,Monarch,Southbend,clausing
LATHE STEADY REST DO NOT KNOW MANUFACTURER 6 3/4" FROM BOTTOM TO CENTER OF REST REAL NICE SHAPE. WORKS WELL NOTE; THERE IS A SMALL PIECE OF CASTING CRACKED OFF SEE PICTURES. IT IS ON THE ONE LOCKING SIDE OF THE SWING ARM. DOES NOT EFFECT ITS LOCKING OR OPERATION. BEARINGS SEEM TO BE IN GOOD COND. WILL BE DISASSEMBLED AND SHIPPED IN MED. FLAT RAT BOX
EXCELLENT ORIG 43" BED LEAD SCREW FOR LOGAN 10 1875 QUICK CHANGE GEAR BOX LATHE
Excellent Original Lead Screw For a 43" bed Logan 10" Model 1875 Quick Change Gear Box Metal Lathe. Lead Screw measures 37 7/8" in total length and the threaded portion measures 26 3/4" long. Includes collar and woodruff key. Lead Screw is part number LA-1235. I have added insurance to the cost of shipping. For shipments in the US and Canada a $3.30 rate has been added. If you plan on purchasing multiple items I would be glad to combine shipping. PLease do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
VERY NICE ORIGINAL LOGAN 10" LATHE HEADSTOCK V BELT CONE PULLEY WITH GEAR
Very Nice- Original headstock V belt cone pulley with pinion gear for a Logan 10" lathe. This was removed from a Logan 10" Model 820. Interior bore is 1 1/2" Very nice unit. All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
VERY NICE ORIGINAL LOGAN 10" MODEL 820 LATHE SHIFTER RACK PART LA-56
Very Nice- Original shifter rack assembly for a Logan 10" lathe. Shifter rack is Logan part number LA-56. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
ORIGINAL LOGAN 10" MODEL 820 METAL LATHE LEAD SCREW BUSHING BRACKET PART LA-484
Original lead screw bushing bracket with oiler for a Model 820 Logan 10" lathe. Stamped with Logan part number LA-484. Mounting bolts are included as shown. All in good order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1443509148e-0xfe-
Lathe boring bar tool holder,Williams #82,machinist tools,logan,southbend,atlas
large Williams#82 boring bar holder. Shank is approx. 5/8" X 1 3/8" Kit comes with 4 boring bars. 1"3/4"5/8"3/8" 1/2" is missing. Wood holding block included. Boring bars have a square angle hole on one end. And a right angle hole at other end for cutting bits. bits not included.
Logan 10" Lathe Headstock V Belt Pulley Assembly
Excellent upgrade for model 820 10" Logan lathe and others with flat belt drives. Rare part. Excellent condition. Headstock pulley has 1.486" bushed bore. 30 tooth gear in great shape. take a close look at the pictures.
10" Logan Lathe Forward Reverse Lever & Gears
Great Condition forward reverse lever a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14438444097-0xe7-
ORIGINAL PRECISION 7/16" 3AT COLLET 4 LOGAN 9 10 ATLAS 10 CRAFTSMAN 12 LATHE
Original Precision 7/16" 3AT collet for use with Atlas 10" Craftsman 12" Logan 9" and 10" lathes. Stamped PRECISION 3AT 7/16. Threads and keyway are in fine order, all as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
SWEETLAND 8" 4 JAW NO. 5 LATHE CHUCK USA MADE 1 1/2-8 TPI LOGAN SOUTH BEND ATLAS
HERE'S A USED NICE HEAVY DUTY SWEETLAND 8" 4 JAW NO. 5 LATHE CHUCK. USA MADE BY THE HOGGSON& PETTIS CO. AND STAMPED SWEETLAND CHUCKS. HAS 1 1/2-8 TPI THREAD AND THERE IS A BRASS INSERT IN THIS CHUCK THAT REDUCED THE SPINDLE THREADS TO THE 1 1/2-8 SIZE. I DO NOT KNOW THE ORIGINAL THREAD SIZE BEFORE THE BRASS INSERT WAS INSTALLED. HAS A 1 3/4" THRU THE CENTER HOLE SIZE HAS REVERSABLE JAWS. USES A STANDARD 7/16" SQUARE KEY BUT NONE SOLD WITH THIS CHUCK. THIS AND IS A HEAVY DUTY CHUCK THAT WEIGHS ROUGHLY 35 LBS. HAS A COUPLE MILLING GRIND MARKS ON TWO OF THE JAWS BUT OVERALL IN REAL NICE SHAPE. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO.
VERY NICE ORIGINAL LOGAN 10" MODEL 200 LATHE COMPLETE APRON ASSEMBLY
Very Nice- Complete original apron assembly for a Model 200. 10" Logan lathe. Split nuts and gears are all in excellent condition. Unit retains original paint and mounting bolts. Very nice complete bolt on installation. All as shown. Shipping within the US includes insurance. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
VERY NICE ORIGINAL LOGAN 9 10 LATHE 2 STEP STEEL V DRIVE MOTOR PULLEY 1/2" BORE
Very Nice- Original Logan 2 step steel V belt motor pulley. 1/2" bore. The top of the V groove inside measurement is 1/2" The base of the V groove is 3/16" Large side is 4 1/4" diameter, small side is 2 5/16" In very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
VERY NICE ORIGINAL LOGAN 10" MODEL 200 LATHE SADDLE APRON CARRIAGE LOCK
Very Nice- Original Logan apron lock nut assembly for a Logan 10" Model 200 lathe. Bolt is 2" to the shoulder. In fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
lathe face plate 5-1/4" 1-1/2 x 8 TPI lathe logan, atlas, southbend
For sale is a face plate for a lathe. Please look at the picture closely as these are a big part of the description and ask me any questions before bidding. If you want more pics just let me know and I will email them to you. This item is being sold as is. Many of the items I sell are used or vintage and although I try to describe everything I see. I am not an expert and may miss things or some things I think of as insignificant may be very important to you, so please email me with any questions first. If you are not happy with your item you can return it and I will refund you the purchase price(you have to pay shipping) Thanks for looking and please check out my other auctions. Thanks. If you have any problems with your purchase please contact me. Thanks. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1443d66c6e5-0xeb-
THEMAC TOOL POST LATHE GRINDER TYPE J-3 N0.2191 ATLAS SOUTH BEND LOGAN CRAFTSMAN
THEMAC Tool post grinde The Mc Gonegal Mfg CO. East Rutherford.N.J. Type J-3 N0. 2191 Volts 115 Amp 2.5 Full Load RPM 12000 Issues: Belt does needs to be replaced.please check 4th pix) Power cord does has repairs.please check 3rd pix) Tools is in good working condition. Comes with all parts shown on pictures. Check out my!
LOGAN lathe Carriage frame Top 04TLC 700A
carriage frame for the logan 04TLC 700A. I didnt clean this part up yet. I wanted to get it on tonight. The ways on the bed were in very good condition. These on this part have some fine scratches. Please look at the photo, on the top end there issome metal missing, have no idea afrom what but does not affect the function of carriage. One of the wiper foam holders is gone(shown in photos. These get really messed up just from using the lathe from parts. If yours is all gouged up real bad, this is a good replacement. If any questions, please ask, I will do my best to answer to the best of my ability. Thank you and good luck.
3AT COLLET MT3 SPINDLE SLEEVE TOOL FITS ATLAS CRAFTSMAN 10 12 LOGAN 9 10 LATHE
3AT headstock spindle protector collet sleeve. Fits an MT3 headstock spinde bore. 3AT collet sleeve for use with Atlas 10" and 12" and Craftsman 12" lathes. Unit is also designed for Logan 9" or 10" lathes. Key is present. In good order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOGAN lathe PULLEY BELT DRIVE 04TLC 700A
This is the part on the back of the lathe for the belts. I wire wheeled it and came out pretty good. Thanks for looking and if you need any other part off this tool let me know and I will try to list it or work something out with you. dimensions of part are approx. just over 3 5/8 long largest O.D. is 5 5/8 mounting hole for bar is 3/4 dia. belt width on all 3 diameters is 1" belt diameters look like 2.5. 3.5, 4.5 Note: this is balanced cast iron questions please ask.
cast iron legs from METAL LATHE LOGAN MONTGOMERY WARDS 10 inch swing
cast iron legs from METAL LATHE LOGAN MONTGOMERY WARDS 10 inch swing. Good used condition. Last picture of complete lathe is for reference only so you can see what it came on. Serial number on lathe is 0223. I do not see a model number. Like all of the items we sell. This item is sold"AS IS" We sell a wide variety of used items. We try to describe them as best we can but we are not professionals, nor are we experts on any type of items we sell. Most of the items we sell are used. When we sell a used item normal wear, scratches, signs of use should be expected. Most items will need a quick cleaning. We do not offer warranties or refunds. Should a refund be granted for any reason it will be less all the shipping fees. All items are sold"AS IS" All sales final. No returns. Shipping is 17.45 in the USA. You are welcomed to ... morecome by& pick it up if you live close enough. Please ask any& all questions prior to bidding. Attention PAYPAL users* Due to paypals nonexistent seller protection policy I will only ship to the address paypal sends me NO EXCEPTIONS.
6" DOG DRIVE FACEPLATE 1 3/4" X 8 TPI SOUTH BEND ATLAS LOGAN CLAUSING LATHE
6" DOG DRIVE FACEPLATE 1 3/4" X 8 TPI IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE ... moreMORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
MACHINIST TOOLS LATHE MILL NICE Logan 5 3 Jaw Lathe Chuck 1 1/2" Bore
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.1
Lathe chuck backplate Southbend, Sheldon, Logan, Clausing
For sale is a lathe chuck backplate. It looks unused. It is marked"8285-5"2-1/4- 8 Made in Poland" 5" overall outside diameter and the hub is 2-3/16" od. I think it is for an"adjust-tru" type of chuck. It has 2-1/4 x8 tpi.
Ward Logan 64-T Gear (from 10" lathe)
Welcome I am selling a Logan 64-T keyed gear. In good condition. The gear came from a 10" Montgomery Ward/Logan lathe, model 700-A. Please feel free to ask any questions@ 717-926-7868. I will be listing other parts/gears from this lathe and will be happy to combine shipping when possible. Shipping will be a flat $4.00 within the lower 48 states. All others, please send your zip code. Questions/inspection/pick up are welcome. Thank you.
Ward Logan 16-T Gear (from 10" lathe)
Welcome I am selling a Logan 16-T keyed gear. In good condition. The gear came from a 10" Montgomery Ward/Logan lathe, model 700-A. Please feel free to ask any questions@ 717-926-7868. I will be listing other parts/gears from this lathe and will be happy to combine shipping when possible. Shipping will be a flat $4.00 within the lower 48 states. All others, please send your zip code. Questions/inspection/pick up are welcome. Thank you.
Ward Logan Keyed Bushing & Spacer (from 10" lathe)
Welcome I am selling a Ward/Logan keyed bushing and spacer. Which came from a 10" Montgomery Ward/Logan lathe, model 700-A and is in good condition. Please feel free to ask any questions@ 717-926-7868. I will be listing other parts/gears from this lathe and will be happy to combine shipping when possible. Shipping will be a flat $4.00 within the lower 48 states. All others, please send your zip code. Questions/inspection/pick up are welcome. Thank you.
Ward Logan 24-T Gear (from 10" lathe)
Welcome I am selling a Logan 24-T keyed gear. In good condition. The gear came from a 10" Montgomery Ward/Logan lathe, model 700-A. Please feel free to ask any questions@ 717-926-7868. I will be listing other parts/gears from this lathe and will be happy to combine shipping when possible. Shipping will be a flat $4.00 within the lower 48 states. All others, please send your zip code. Questions/inspection/pick up are welcome. Thank you.
Ward Logan 56-T Gear (from 10" lathe)
Welcome I am selling a Logan 56-T keyed gear. In good condition. The gear came from a 10" Montgomery Ward/Logan lathe, model 700-A. Please feel free to ask any questions@ 717-926-7868. I will be listing other parts/gears from this lathe and will be happy to combine shipping when possible. Shipping will be a flat $4.00 within the lower 48 states. All others, please send your zip code. Questions/inspection/pick up are welcome. Thank you.
Logan Ward 10" Lathe Tumbler Pinion Studs
Welcome I am selling a pair of Ward/Logan tumbler studs that came from a 10" lathe model 700-A. The lathe was"customized" a long time ago. Now I'm selling the parts that are in good, original condition. If there is anything you are looking for, please ask so I can list it right away. Please feel free to ask any questions@717-926-7868. I will be happy to combine shipping when possible. Shipping is a flat $4.00 within the lower 48 states. All others please send your zip code. Questions/inspection/pick up are welcome. Thank you.
ORIGINAL MT2 HARDINGE HDC LIVE CENTER 4 ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE
Nice- Original Hardinge live center with MT2 shank. Shank is 3" long. Body is stamped"HARDINGE- HDC ELMIRA. N.Y. U.S.A. Cap is removable. In good order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Logan 200 10" Lathe Motor Mount Head Stock Cone Pulley Chuck Montgomery Ward
Parting out a Logan Model 200 Lathe This lathe came out of an estate and had been sitting in a basement for close to 40 years. The serial number on the bed looks to be 16551(the second 5 is hard to read for sure) But based on this it looks liked it was made in 1942. That is from the Logan website. I am looking to sell the drive system- Head Stock, Cone Pulley, Motor Mount, Motor, Brackets, Chuck, Belt This is kind of a bastardized drive system- some parts look original, other parts are definitely modified, some are fabrications or newer. I will let the photos speak for themselves. I have a couple of photos that show this as it was found assembled. I ran it enough to prove to me that the motor works and everything spun, but I can't say how good a shape the bearings or gears are in- it definitely needs cleaned up. This grouping is pretty ... moreheavy- about 100 pounds, but I will ship. If you need more photos or have questions, let me know but it may take a little time to get back to you. I will also be listing the tail stock, bed, bed legs, and apron/ cross feed saddle assemblies. If there is no interest in the complete group, I can part out this grouping. If you are interested in just parts of this group or other parts, contact me
Logan Ward 10" Lathe Reverse Tumbler Bracket
Welcome I am selling a Ward/Logan tumbler bracket that came from a 10" lathe model 700-A. The lathe was"customized" a long time ago. Now I'm selling the parts that are in good, original condition. If there is anything you are looking for, please ask so I can list it right away. Please feel free to ask any questions@717-926-7868. I will be happy to combine shipping when possible. Shipping is a flat $6.00 within the lower 48 states. All others please send your zip code. Questions/inspection/pick up are welcome. Thank you.
Buck 6" 6 jaw lathe chuck, south bend, clausing, atlas, hardinge, logan
You are bidding on a genuine Buck 6" 6 jaw lathe chuck. This has NO mounting plate. You will have to provide one to fit your lathe. This chuck comes with 6 2-piece jaws, and the removable extension of the 2-piece jaw. The extensions are stamped 10050 33. 3 of the extensions are mounted, and 3 are not, because the bolts to mount the other 3 extensions are not included. Key is included. I see no damage. The jaws are nice, they do not wiggle, are tight in ways. I see no evidence of work piece slipping in the jaws, the jaws look new. The chuck operates smooth with the key. Enco wants $577for this chuck also without a mounting plate. Free shipping is for the USA only. Please ask any questions and thanks for looking
ORIGINAL PRECISION 7/32" 3AT COLLET 4 LOGAN 9 10 ATLAS 10 CRAFTSMAN 12 LATHE
Nice- Original Precision 7/32" 3AT collet for use with Atlas 10" Craftsman 12" Logan 9" and 10" lathes. Stamped PRECISION 3AT 7/32. Threads and keyway are in fine order, all as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14456f8c1f8-0x102-
ORIGINAL PRECISION 3AT COLLET SLEEVE & HOLDER ATLAS CRAFTSMAN LOGAN LATHE
Original Precision 3AT headstock spindle protector collet sleeve and steel holder. Sleeve fits an MT3 headstock spinde bore. 3AT collet sleeve for use with Atlas 10" and Craftsman 12" lathes. Unit is also designed for Logan 9" or 10" lathes. Key is present. Unit is stamped"PRECISION- 3AT" All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14456f8bc1f-0x116-
ORIGINAL PRECISION 5/32" 3AT COLLET 4 LOGAN 9 10 ATLAS 10 CRAFTSMAN 12 LATHE
Original Precision 5/32" 3AT collet for use with Atlas 10" Craftsman 12" Logan 9" and 10" lathes. Stamped PRECISION 3AT 5/32. Threads and keyway are in fine order, all as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
ORIGINAL PRECISION 13/32" 3AT COLLET 4 LOGAN 9 10 ATLAS 10 CRAFTSMAN 12 LATHE
Original Precision 13/32" 3AT collet for use with Atlas 10" Craftsman 12" Logan 9" and 10" lathes. Stamped PRECISION 3AT 13/32. Threads and keyway are in fine order, all as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Lever Double Cross Slide 10" Logan Lathe Production Tool Post
Lever Double Cross Slide 10" Logan Lathe Production Tool Post in very good condition. Works great as a double cuttoff tool holder etc. May fit other lathes but it was used on a Logan 10" Please ask if you have questions. Thanks for looking.
Ward Logan 10" Lathe Countershaft good condition
Welcome I am selling a Ward/Logan countershaft that came from a 10" lathe model 700-A. The lathe was"customized" a long time ago. Now I'm selling the parts that are in good, original condition. If there is anything you are looking for, please ask so I can list it right away. Please feel free to ask any questions@717-926-7868. I will be happy to combine shipping when possible. Shipping will be based on location. Please send your zip code. Questions/inspection/pick up are welcome. Thank you.
Lathe - Logan - Wards 10" - Cross Slide Chip Guard / S 195
Cross Slide Chip Guard Logan- Wards 10" Lathe. 2 1/2" center to center holes Good. Used condition, No damages Or Repairs
NICE ORIGINAL LOGAN 10" MODEL 820 LATHE COMPOUND REST BASE CAST & GIB LA-747
Nice- Original compound rest base cast with gib. Screws and pins for a Model 820, 10" Logan lathe. Rest base is Logan part number LA-747. Condition of threaded nut is unknown. Pins, gib and gib adjusting screws are included. In good order, all as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
ORIGINAL LOGAN 10" MODEL 820 LATHE SADDLE GIB ASSEMBLY
Nice- Original saddle gib assembly for a Model 820 Logan 10" lathe. Hardware is included as pictured. All in good order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Logan Lathe Crossfeed handle 3 inch diameter Atlas Craftsman South bend
Logan lathe cross feed handle in very good condition. It is 3 inches in diameter. Has a 3/8 hole. 7/64 key slot. This will fit many lathes
5 Inch 3 Jaw Lathe Chuck, Logan, Atlas, Craftsman, 1-1/2 x 8 tpi
Up for auction I have one 5 inch diameter 3 jaw lathe chuck that is threaded 1-1/2 x 8 tpi in good used condition. There is an additional step machined on the chuck jaws, please see pictures. What you see in the pictures is what you are bidding on. Jaws are not reversible. Item will be sold as is so please ask any questions before bidding. No international bidding.
Jacobs #100 chuck for lathe South Bend Atlas Sheldon Logan Sheldon
Used Jacobs#100 chuck with brass jaws. It has a Jacobs morse taper#2 arbor.
Logan Lathe Model 820 10x43 Mid-Fifties Completely Tooled with Extras
0 0 1 105 603 Snarling Fish Steelworks 5 1 707 14.0 Normal 0 false false false EN-US JA X-NONE Logan model 820 10x43 lathe. This lathe runs with precision. I am only the second owner. Being a master machinist for 30+ years. It has been taken very well care of. Always kept inside a shop. It was built in the mid-fifties. Includes: Many chucks– three jaw. Four jaw and six jaw· Quick change tool post with holders· Face plates and dogs· Steady rest· Micro adjustment stop· MT2 tailstock. Live centers, drill chuck· Many containers of HSS blanks and grounds I will load on your truck or your carrier's rig. It weighs approximately 7-800 lbs and will fit in the bed of a pick-up. Buyer is responsible for rigging. Payment due prior to loading. As is.
LOT OF 9 MILLING SAWS SLITTING SAWS for Atlas Craftsman South Bend Logan lathe
This listing is for a used lot of 9 milling saws. They all have a 1" bore with a 1/4" keyway. They are 2 1/2"3" in diameter. The thicknesses are.102" 2) 3/32" 3/16, 1/8" A, S, T and one I could not read. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
Logan 11" x 37" metal lathe model 1957 long bed w/3 jaw and tool post VERY NICE
CREDIT CARD PAYMENT OVER THE PHONE OR PAYMENT IN PERSON AT TIME OF PICK UP ARE THE ONLY FORMS OF PAYMENT ACCEPTED ON THIS ITEM. THAT IS OUR POLICY ON ITEMS OVER $500. REPEAT. PAYPAL PAYMENT WILL NOT BE ACCEPTED ON THIS ITEM! Selling a nice little logan 11 x 37 metal lathe. It is a model 1957. It has an 11 inch swing and is 37" center to center. Machine runs very well. Currently set up for 220 volt three phase operation. Has quick change box for threading. 3 jaw logan chuck, a tool post, a left and right cutter, center for the tailstock, a flip down guard for the compound, chuck wrench, and the wrench for tool post. Machine runs very very quiet and smooth. Minimal backlash on the compound. This is one of the more well made lathes in this size we have seen, and it is in exceptionally good mechanical condition. We have new static phase ... moreconverters available for an aditional 100 dollars. WE HAVE A FORKLIFT HERE TO LOAD IT ONTO A TRUCK OR TRAILER. FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. OR COME TO OUR FACILITY AND INSPECT UNDER POWER. WE WILL BE GLAD TO DO WHAT WE CAN TO ASSIST. 717)926 3975. PLEASE EMAIL OR CALL US FOR A SHIPPING QUOTE. SHIPPING TO A COMMERCIAL LOCATION IN THE CONTINENTAL US SHOULD BE BETWEEN 200-400 DOLLARS. BUT YOU MUST CONTACT US IF YOU NEED AN EXACT PRICE. LOCAL PICK UP IS MORE THAN WELCOME, BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. CREDIT CARD IS THE ONLY METHOD OF PAYMENT. WE CAN TAKE A CREDIT CARD OVER THE PHONE. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
MORSE #2-3MT SLEEVE ADAPTOR Atlas Craftsman South Bend Logan Lathe FREE SHIP
FREE CONTINENTAL US SHIPPING Hi. All, Here is a used Morse Taper Sleeve Adaptor. MT2 on the Inside. MT3 on the outside. Has some light staining and a few minor scratches. Inside feels nice and smooth. Check out my other turning auctions going on right now. Please check out the pictures and ask any questions. I pack carefully and ship quickly. If the postal calculator is off by more than $2 I reimburse the difference. And will gladly combine shipping. I charge no packaging or handling fees. Not Happy? Return it. What you see is what you get. Check out my other auctions for some turning and lathe type things and who knows what else. Thanks Jeff
JACOBS Drill CHUCK 7B & 30B for Atlas Craftsman South Bend Logan lathe tailstock
Nice pair of Jacobs drill chucks in good working order used for accurate drilling ans countersinking. That came from an Atlas 618. These are center rest/ tailstock chucks. The 7b is nice and smooth and works flawlessly but I do not have the key for it. It is marked k44 7B cap. 0-1/4 Thd 3/8-24. The 30B is a little stiff when spun by hand but opens and closes completely fine with use of the key. It is marked Cap 0-5/16 THD 3/8-24 Great chucks and very useful especially when used with a tailstock turret.
LOT OF 12 REAMERS for Atlas Craftsman South Bend Logan lathe Bridgeport
This listing is for a used lot of 12 reamers. They are 35/64-11/16" There are straight flute and twist. Some have tapered shanks. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
LOT OF 10 LARGE REAMERS for Atlas Craftsman South Bend Logan lathe Bridgeport
This listing is for a used lot of 10 large reamers. They are 3/4" 1 1/2" There are straight flute and twist. A couple have a chip out of the blades. Some have tapered shanks. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
Drawbar Collet Closer Holder ( from Ward Logan 10" Lathe)
Welcome I am selling an older drawbar that came from a Ward/Logan 10" lathe model 700-A. The 1 collet that is included is a Sutton 1/4" but there is no name or marking on the bar. Notice the knurling on the collar has been damaged and the finish on the handle is scratched. It all works as it should but could benefit from a cleaning/buffing. The handle could be lightly sanded and refinished. The lathe was"customized" a long time ago. Now I'm selling the parts that are in good, original condition. If there is anything you are looking for, please ask so I can list it right away. Please feel free to ask any questions@717-926-7868. I will be happy to combine shipping when possible. Shipping will be a flat $13.00 within the lower 48 states. All others please send your zip code. Questions/inspection/pick up are welcome. Thank ... moreyou.
logan Lathe top Cover 11" # LA-1035-1
Logan Metal Lathe. 10" top cover.measures 22" long X 8-1/2" wide& 3-1/2 high. Please note that 5th pic. shows knob reverst 4 shipping) I ship very fast, in 24 hrs. or less 5-1/2 days a week. USPS. LOCAL Pick-up free
Lathe tool holder, Boring bar,machinist tools,Southbend,Logan,Clausing,Monarch?
Lathe boring bar and holder. Shank is 1" X 3/4"
Cushman 6" 3 Jaw Lathe Chuck 2 1/4" -8 South Bend or Logan Great Shape
All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. International Bidders Please Inquire About Shipping Cost Prior To Bidding SOTTOF SALES The chuck functions great. Jaws smooth and tight, reversible two piece jaws) The internals are in close to unused condition. I have taken hundreds of lathe chucks apart and I can say without a doubt that you will be pleased with this chuck. Chuck has been completely taken apart, cleaned and lightly greased, ready for use. The red circle on the face of the chuck is a grease fitting with a plastic cover. Cushman chucks are incredibly well built and this one is from a school lathe and has seen more storage than use, was original equipment for a Heavy Ten. The backplate is a South Bend brand with a 2 1/4" 8 threaded ... moremount, chuck includes key. This would be an ideal chuck on a South Bend Heavy Ten(10L) or a Logan 11" lathe. D4042.27 EBAY AUCTION POLICIES: Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool par
Logan Wards Power Kraft Tail Stock 10" lathe Ram lock lever binding lever LA 177
Logan Wards Power Kraft tailstock ram lock or binding lever LA-177. Cleaned down to bare metal and painted with good oil base paint to match Logan color. Excellent condition. Powered by The free listing tool. List your items fast and easy and manage your active items.
Logan Wards Power Kraft 10 inch lathe tail stock ram binding plug LA-151
Logan Wards Power Kraft 10 inch lathe tail stock ram binding plug LA-151. Powered by The free listing tool. List your items fast and easy and manage your active items. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-1448084a34b-0xe8-
Logan Wards Power Kraft 10 inch lathe tail stock casting LA-105-1-X
This is a Logan. Wards, Power Kraft tail stock casting LA-105-1-X Fits tail stock base LA-1066. This tail stock is for a 10 inch lathe. Cleaned down to bare metal and painted with good oil base paint to match Logan color. Very good condition. Powered by The free listing tool. List your items fast and easy and manage your active items.
Logan Wards Power Kraft 10 inch lathe left hand lead screw bracket # LA-166
This is a Logan. Wards, Power Kraft left hand lead screw bracket. Part number LA-166. Cleaned down to bare metal and painted with good oil base paint to match Logan color. Very good condition. Powered by The free listing tool. List your items fast and easy and manage your active items.
Logan Wards Power Kraft 10 inch lathe change gear bracket spider banjo LA-227
This is a Logan. Wards, Power Kraft change gear bracket(spider, banjo) bracket for a 10 lathe part no. LA-227. It has been cleaned down to bare metal and painted with a good quality oil base enamel matching the original Logan color. The only marks are from mounting gears on the brackit. Excellent condition. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOT OF 4 MIXED DRILLS for Atlas Craftsman South Bend Logan lathe
This listing is for a used lot of 4 drill bits. They are 11/16(2MT) 3/4(straight shank) 13/16(2MT) 7/8"3MT) I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
Logan Lathe Owner's Manual 900 Series 11"
Owner's manual for Logan 900 series metal lathe. Includes operating instructions.Some wiring diagrams,parts diagrams with parts list. Also includes a 1995 parts price list. Approx. 40 pages and includes model 905.907,910,912,915,917,920 and 922. This manual was provided by Logan. Good condition includes binder with pages in vinyl sleeves.
MACHINIST ARBOR 3/8" STRAIGHT SHANK ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE
MACHINIST ARBOR 3/8" STRAIGHT SHANK ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE Brand Unknown Packaging None Condition Excellent Quantity 1 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
FRANKLIN 1/3 HP 1725 RPM 1 PH MOTOR LATHE LOGAN ATLAS CRAFTSMAN SOUTH BEND ETC.
FRANKLIN 1/3 HP 1725 RPM 1 PH MOTOR LATHE LOGAN ATLAS CRAFTSMAN SOUTH BEND ETC. Brand Franklin Packaging None Condition See Description Quantity 1 5/8" Shaft. Cord has been cut. I tested the motor before removal. It runs strong but its noisey. I think its the fan or brushes but thats just a guess. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist ... moreand woodworker. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1448592e455-0x104-
4 Jaw Lathe Chuck Craftsman Atlas Logan Part #101-21550 Fine Thread Spindle
4 Jaw Lathe Chuck Craftsman Atlas Logan- Fine Thread Spindle. An estate sale find! A nice original Sears Craftsman or Atlas 4 inch diameter. 4 jaw lathe chuck- fine thread spindle. Part# 101-21550- also has this number on it C84539 Will fit the Atlas or other brands of equipment Includes the correct chuck key Threads are 1 inch- 20 TPI Through hole is 4/3 inch diameter. My Service Commitment: Great packing. Speedy shipping and quick communication plus reasonable shipping and handling. Please check out my other items and add me to your favorites list! Thanks! 4 Jaw Lathe Chuck Craftsman Atlas Logan- Fine Thread Spindle Powered by The free listing tool. List your items fast and easy and manage your active items.
ORIGINAL LOGAN 10" 820 LATHE COUNTERSHAFT DRIVE BOX BRACKET HINGE BRACKET & PINS
Nice- Original set of Logan drive box hinge brackets with pins for a Logan 10" Model 820 lathe. Includes original mounting hardware shown. Pins are 5/16" diameter. In fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
ORIGINAL LOGAN 10" 820 LATHE DRIVE BOX HEADSTOCK GUARD KNOB PART LA-680
Very Nice- Original drive box guard knob assembly for a Logan 10" Model 820 lathe. Includes all original mounting hardware shown. Knob is Logan part number LA-680. All in fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
LOGAN 10" 820 LATHE DRIVE BOX COUNTERSHAFT ADJUSTING SCREW & KNURLED KNOB LA-366
Very Nice- Original drive box countershaft adjusting screw assembly for a Logan 10" Model 820 lathe. Adjusting screw is 2 3/4" long. 3/8" diameter. Knurled knob appears to have been added for a nice finished look. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
ATLAS LOGAN SOUTH BEND 9 10 12 LATHE LANTERN STYLE ROCKER TOOL POST HOLDER PARTS
HERE'S A ATLAS CRAFTSMAN LOGAN SOUTH BEND 9" 10" 12" METAL LATHE LANTERN STYLE ROCKER TOOL POST HOLDER FOR PARTS. DIMENSIONS ARE: TOOL POST BASE: 1.537 X 1.25 X.189 TOOL POST BODY DIAMETER: 750 HEIGHT TO SHOULDER( TOP OF SLOT) 2 1/2 SLOT WIDTH: 408 SLOT LENGHT: 1.821 PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1448c580f34-0xec-
Logan lathe metal 11x24 logan model 1955TH
We are liquidating our equipment and this great lathe.You get a collet closer and all you see in photos.There are even some chuck adapter plates so one could mount a big chuck. We are selling as local pick up only.The machine is under 220 3 phase power so you can check it out. We can load on your truck by appointment and we will be available after normal Business hours for buyers convenience. We accept PayPal.But prefer CASH on delivery. Should you have questions tel 815 637 7637 days or thru E bay messaging. We have operators book that goes with machine.I just for got to photograph it. Should you ever need a replacement part Logan actuator Co of Chicago sells such. NEW Information! after reading up on this machine model no 1955 is actually a 11 inch swing. made in 1966 and appears to weigh 900 lbs with base unit,not including all the great ... moretool package weight. I found it has 16 speeds. back gear speeds 82 112 148 +205. Direct drive speeds are 228 318 414 490 576 676 888+1,230 Rpm the machine is reversible hand switch in front. by the The book list this machine with a 3/4 HP motor. To save you some time there is no steady rest with this machine lot.
ATLAS LATHE LEVERACTION COLLET CLOSER SOUTH BEND CRAFTSMAN LOGAN
LEVER ACTION COLLET CLOSER IS A GREAT PRODUCTION DEVICE FOR 3AT COLLETS FOR 10 IN. OR 12 LATHES YOU CAN KEEP THE LATHE RUNING AND FEED STOCK WITH OUT SHUTING DOWN THE LATHE
LIVE CENTER MADE BY JC GLENZER CO.MT 2 SOUTH BEND ATLAS LOGAN CRAFTSMAN LATHE
LIVE CENTER MADE BY JC GLENZER CO.MT 2 THIS IS A WELL MANUFACTURED LIVE CENTER. THE TOP CAN BE TAKEN OFF TO ACCESS THE BEARING AND THE BASE OF THE TIP. SEE PICTURES. THIS IS A HEAVY DUTY CENTER. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive ... morepurchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
MT 2 DEAD CENTER ATLAS CRAFTSMAN LOGAN SOUTH BEND CLAUSING LATHE
MT 2 DEAD CENTER IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE ... moreGIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14492714d05-0xe5-
ATLAS 6" DOG DRIVE FACEPLATE # 9-15 CRAFTSMAN SOUTH BEND LOGAN CLAUSING LATHE
ATLAS 6" DOG DRIVE FACEPLATE# 9-15 1 1/2" X 8 TPI IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF ... moreYOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
ORIGINAL LOGAN 10" LATHE COUNTERSHAFT GUARD SAFETY STAY BAR PART LA-382
Nice- Original drive box stay bar assembly for a Logan 10" Model 820 lathe. Includes all hardware shown. Stay bar is Logan part number LA-382. In fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Lathe Tailstock Clamp Wrench 15/16" Hex - Lock, Logan, South Bend
Lathe Tailstock Clamp Wrench 15/16" Hex This listing is for a Lathe Tailstock Clamp Wrench 15/16" Hex. As shown in the photos. There is no logo on the wrench, only a"M" stamped on the back side. Check my other listings for more lathe parts! I am happy to combine shipping to save you money-just let me invoice you before you pay. $5.95 Flat Rate Shipping anywhere in the USA. Contact me for costs to other locations. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does!