|
5/8'' INDEXABLE MILL ISCAR 5/8'' SHANK 167K
5/8" INDEXABLE MILL 5/8' SHANK MADE BY ISCAR 3& 1/8' OAL E90A-D.62W.62 You are buying a used but good mill. Buy with confidence knowing that we inspect. Clean and test(when possible) most tools prior to each auction. POLICIES• All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the buyer's responsibility to understand the terms of the sale. The nature of equipment offered and buy accordingly. The buyer must notify us of a problem within 3 days of receiving item(s) If you are not happy with your purchase. We will gladly refund your money, minus shipping costs. If the item is not as described. You will receive a full refund. SHIPPING We don't up- price our shipping ... moreand we don't add handling costs. If we can save you on shipping. We will combine or use a different carrier to do so. If we ship your item for a cheaper price, we will refund the difference to you. Shipping will be via UPS unless otherwise specified. UPS will send an email containing a tracking number once we ship your item. For UPS. P.O. BOXES are never accepted. We ship items to physical addresses only. We ship to the address registered with PayPal. If that address is incorrect. It is the buyer’s responsibility to supply us with the correct address prior to paying for the item. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 7 days have past. We ship 5 days a weeks. However, items purchased on Fridays may not be shipped until the following Monday. International items may take longer. eBay's star ratings and feedback directly affect a buyer. If you feel that we don't deserve 5 stars or positive feedback. Please contact us before leaving feedback. CONTACT US JOSEPH D'AMICO 440-773-9477 CLEVELAND. OHIO Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
3/4'' INDEXABLE MILL ISCAR 3/4'' SHANK 167J
3/4" INDEXABLE MILL 3/4' SHANK MADE BY ISCAR 3& 3/8' OAL E90AD-D.75W.75 You are buying a used but good mill. Buy with confidence knowing that we inspect. Clean and test(when possible) most tools prior to each auction. POLICIES• All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the buyer's responsibility to understand the terms of the sale. The nature of equipment offered and buy accordingly. The buyer must notify us of a problem within 3 days of receiving item(s) If you are not happy with your purchase. We will gladly refund your money, minus shipping costs. If the item is not as described. You will receive a full refund. SHIPPING We don't up- price our shipping ... moreand we don't add handling costs. If we can save you on shipping. We will combine or use a different carrier to do so. If we ship your item for a cheaper price, we will refund the difference to you. Shipping will be via UPS unless otherwise specified. UPS will send an email containing a tracking number once we ship your item. For UPS. P.O. BOXES are never accepted. We ship items to physical addresses only. We ship to the address registered with PayPal. If that address is incorrect. It is the buyer’s responsibility to supply us with the correct address prior to paying for the item. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 7 days have past. We ship 5 days a weeks. However, items purchased on Fridays may not be shipped until the following Monday. International items may take longer. eBay's star ratings and feedback directly affect a buyer. If you feel that we don't deserve 5 stars or positive feedback. Please contact us before leaving feedback. CONTACT US JOSEPH D'AMICO 440-773-9477 CLEVELAND. OHIO Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Indexable Heliquad Insert Drill DR1062-4248-125-3 (ISCAR 4xD) And 10 Inserts
This is a 1.062 dia. Index drill that comes with 10 inserts and a torx wrench
|
|
|
ISCAR HELIMILL 2" Extended Flute Milling Cutter w/ Inserts ADK D2.00-2.00-W1.25
Iscar HELIMILL Extended Flute Milling Cutter( ADK D2.00-2.00-W1.25) Cutting Diameter: 2.000" Shank Diameter: 1.250" Neck Length: 2.35" Overall Length: 4.75" Depth of Cut(ap) 2.000" Number of Flutes: 4 Inserts Required: 10 Compatible Inserts: AD. 1505. This mill is in good condition and comes with 10 new inserts shown(Grade IC635) Will ship out one day after receipt of payment.
|
|
|
Large Lot of Boring Bars, Kennametal, Sandvik, Coromant, Iscar ect..
We will ship anywhere in the United States. If you are out of the United States we will ship to any Port that you choose with in the USA. We will answer any questions and assist in any way possible to facilitate your purchase, call 203-592-8402 with any questions or offers. Thank you! Please call 203-592-8402 with any questions regarding shipping. We need some basic information to give you a correct shipping quote. Zip code of where the item is being shipped to, whether it is a commercial or residential address. Is there a loading dock or forklift on sight to unload the item? Do you need a Lift Gate Delivery? We will assist you in any reasonable way to help get your items to your destination, Thank You
|
|
|
3 - LATHE Insert Holders 2 ISCAR 1 SECO (2 Groove Inserts Holder and 1 Diamond)
Up for sale are 3 Lathe Insert Holders 2 ISCAR and 1 SECO. The details on the ISCAR ones are 1- grooving insert holder GHGR 19-2(27549) 1- ISCAR HELIIR-19C-305 HELI GRIP with thru coolant. The details for the SECO is SDJCR-12-3 Diamond Insert holder(223889) If you have any questions feel free to ask and I will respond as soon as possible. Don't forget to take a look at my other listings. Thanks for looking.
|
|
|
ISCAR SUMOCHAM DCN 0827 DRILL BODY W/ ICP .0862 HEAD USED IN A+++ CONDITION
Gr8Toolz_123“We Pride Ourselves With Providing Only The Best Tooling” PERFECT 100% POSITIVE FEEDBACK! Auction details: BARELY USED– EXCELLENT A+++ CONDITION! ISCAR SUMOCHAM DRILL BODY DCN 0827-126-100A-1.5D& SUMOCHAM DRILL INSERT HEAD(0862) ICP 0862 IC908“We checked these out under our 25X scope and saw very minimal wear. Appears to have drilled a couple of holes. That’s it. Please reference the spec sheet photos provided for all additional details”Gr8Toolz_123 List Price– Body $320.00 ea. Head $129.00 Shipping: lower 48 continental usa only!
|
|
|
Torch Screw Drivers: Kennametal-DT 8, WIHA Trox LLC 362, Iscar T8
Yellow Kennametal DT 8 Torx T8. Red WIHA Torx LLC 362 Van-Moly Boan Ta5 x 80 made in Germany. Blue ISCAR T8 Torx Driver.
|
|
|
Iscar Boring Grooving Head GM 35-W1.00 3829
About Us Return Policy Shipping Payment Shop Tools for Machinist. Wood Worker and Porsche Mechanic. Iscar Boring Grooving Head GM 35-W1.00 3829 Iscar Boring/Grooving Head. GM 35-W1.00 3829 1.00” diameter 4” long Head has been relieved. See photos. Very good condition overall. About Us Former Porsche Dealer and independent Mechanic. Specialist in 356 restoration. Tool collector and member of PAST. Wood worker and Metal Worker. Selling Porsche parts, Collectible Tools, German, Quality American and Swiss Tools, Shop Tools and Supplies including Deckel, Schaublin and Monarch machines and accessories. Payment We accept Paypal. Contact us if you wish to use another means of payment. Shipping Careful packing comes free with every auction. We pack as economically as possible. And use USPS flat rate boxes if the item will fit. Heavy items are pre-wrapped ... morein cardboard, with additional packing around sharp corners. Nothing is left to chance. No handling charge is added for our auctions, the shipping cost is always the cost charged by Ebay. Machinery and very large or heavy items that are shipped freight will have an additional crating charge that is specified in the auction description. Return Policy Returns accepted within 14 days. Buyer pays return shipping. gsrx_vers_603(GS 6.9(603)
|
|
|
JOB LOT SMALL LATHE TOOLS INDEXABLE BY HERTEL / SANDVIK / ISCAR ETC - ITEM 353
SEE PICTURES FOR MORE DETAIL. DELIVERY PRICE QUOTED TO MAINLAND UK ONLY PLEASE ASK FOR DELIVERY TO OTHER AREAS. YOU ARE LOOKING AT A OLIVER 4 HEAD SINGLE ENYOU AR THANK YOU FOR TAKING A LOOK PLEASE HAVE A LOOK AT MY OTHER ITEMS Any questions please ask 07926 048237.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-149cfa01f17-0x110-
|
|
|
ISCAR GTN 3 IC 656 P20-P40 Inserts(8pcs)
ISCAR GTN 3 IC 656 P20-P40 Inserts(8pcs) Includes everything in the picture Made: Netherlands GTN-3 IC 656 P20-P40 Includes 8 inserts*Insert are not in original wrapping however they have never been used* Dimensions Weight Small Flat Rate Box Condition: Used* Contact Seller for international Shipping information Machines are subject to ACT Inc’s terms& conditions below and notes: The goods sold are second hand goods and ACT. Inc. Therefore makes no warranty of any kind, and sells goods“As is, As inspected, And“With all faults” ACT, Inc. makes no warranty of any kind whatsoever, Specifically any warranty of merchantability or fitness for a particular purpose. ACT, Inc. disclaims any reliance by buyer on ACT Inc’s skill, or judgment to select or furnish the goods for any particular purpose, expressed or implied. Customer is responsible ... morefor all shipping& rigging costs. Contact information ACT Machinery Phone: 1714-441-1992 Email: Act@actmachinery.com STANDARD TERMS AND CONDITIONS OF SALE TERMS: All payments must be received within 10 business and prior to shipment of machine. All sales in CA are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such a tax. A 1-1/2% monthly service charge will be added to all balances 30 days past due. Payments: ACT Machinery. Inc. accepts all major credit cards: Visa, Master Card, and American Express. We also accept, wire transfers, money orders, cashier checks and Pay Pal as payment of goods purchased. SHIPPING; Customer Is Responsible For All Packaging. Shipping& Rigging Costs. No International Shipping. TITLE: Title shall not pass to Buyer upon delivery of the goods. But shall remain vested in Seller until the entire purchase price and applicable taxes are paid in full. A 1-1/2% monthly service charge will be added to all balances past due. INDEMNIFICATION: Buyer a
|
|
|
MODIFIED ISCAR 1" END MILL HM90 E90A D1.00-3-C1.00-B MILLING CUTTER
You are bidding on a MODIFIED ISCAR 1" END MILL HM90 E90A D1.00-3-C1.00-B MILLING CUTTER Item has been slightly modified- 1) Neck AND Shank of tool was turned down for added clearance. Nominal Diameter: 1" Overall Length: ~7.8" Inserts: AP* 1003* Buy purchasing this item. You agree to the following terms: T ERMS 1) There are no returns. Refunds, exchanges or warranty on the item. 2) I only accept PayPal. And I only ship to the address which the buyer provides within the PayPal payment, no exceptions. 3) Buyers have 3 days from the time of sale to pay for their item. 4) All orders will be shipped within 2 business days of payment with a tracking number via USPS. 5) I package the items EXTREMELY well. If there is any damage from shipping please contact the shipping company. 6) Sorry. NO INTERNATIONAL SHIPPING 1.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3FUK.RP73%28B0G%40%40%3E1-149d89590d5-0xc9-
|
|
|
ISCAR MSBNR 20-6E Self Grip Tool Holder Carbide Inserts USED
ISCAR MSBNR 20-6E TOOLING BIT HOLDER ASSEMBLY USED.BUT COMPLETE AND IN EXCELLENT CONDITION PLEASE LOOK AT THE PICTURES CLOSE.AND ASK ANY QUESTIONS, AS IT IS THE EXACT ITEM YOU WILL RECEIVE! Check out my! Be sure to add me to your! Stores SHIPPED IN A QUALITY BOX. I WANT YOU TO BE AS AMAZED AS I AM AT THE CONDITION! THANK YOU FOR SHOPPING UNDERGROUNDCYCLES97303 WHERE WE SCREW THE OTHER GUY, AND PASS THE SAVINGS ON TO YOU!
|
|
|
NICE ISCAR MULTI-MASTER HOLDER MM S-A-L4.00-C.625-T10 STOCK #EM889
ISCAR MULTI-MASTER HOLDER PART NO. MM S-A-L4.00-C.625-T10. 5/8" SHANK Nice used condition. As pictured. Payment due within 48 hours of purchase. Check. M/o, or PayPal accepted. FREE USPS Priority Mail shipping with tracking. STOCK#EM889 Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-149df7cd614-0x105-
|
|
|
Iscar DCM 115-057-16A-5D Indexable ChamDrill with Insert Tip 11.5mm / .453"
Iscar Coolant-Fed Indexable Head Drill DCM 115-057-16A-5D. This drill is in very good condition and comes with the sharp insert tip shown(11.5mm/ 453" Will ship out one day after receipt of payment. D min D max L d D3 L1 L4 Po. Size 11.50, 11.90, 34.0, 16.00, 20.00, 50.0, 48.0, 11.0,
|
|
|
6mm Iscar E06H SWUBR-06 Solid Carbide Boring Bar Coolant Thru (N 686)
Used. Excellent Condition. ISCAR E06H SWUBR 06 Boring Bar ISO-Turning Family: Screw clamp miniature boring bars for small WBMT trigon inserts. S- Steel shank; E- Carbide shank with coolant hole. Designation: E06H SWUBR-06 Right-hand shown d l1 l2 h h1 f Ga° Gr° D min Coolant Shank m. R/L 6.00, 100.00, 5.2, 2.6, 3.3, 0, 15, 6.50, Y, C, R, Related inserts for: E06H SWUBR-06 WBGT: Trigon 5° positive flank inserts with a ground chipformer. Used for for finishing on miniature boring bars. Provide excellent surface finish. Suitable for a wide range of materials. Designation l di S r R/L ft(min) ft(max) ap(min) ap(max) Tough‹ Hard Grade& Vc 2.18, 3.97, 1.59, 0.20, L, 0.05, 0.10, 0.10, 1.00, WBMT: Trigon 5° positive flank inserts with a ground chipformer. Used for for finishing on miniature boring bars. Provide excellent surface ... morefinish. Suitable for a wide range of materials. Designation l di S r R/L ap(min) ap(max) ft(min) ft(max) Tough‹ Hard Grade& Vc 2.18, 3.97, 1.59, 0.10, L, 0.40, 2.00, 0.10, 0.15, 2.18, 3.97, 1.59, 0.20, L, 0.40, 2.00, 0.10, 0.15, Checkout My Other Save BIG with Combined Shipping Discounts! TX Residents must pay 8.25% Sales Tax. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ISCAR RM-BNT9-5D-1.25C & RM-BNT9-8D-1.25C (FREE SHIPPING )
REAMER BODIES ARE IN GOOD CONDITION COME WITH 2 NEW BAYONET"S AND 2 HANDLES. 1 5XD BODY AND 1 8XD BODY. GIVE ME YOUR BEST OFFER! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-149e7d347fc-0x116-
|
|
|
ISCAR MODEL SGSF 125-3-1.250K INDEXABLE MILLING CUTTER 5" DIAMETER X 1-1/4" BORE
Iscar Indexable Milling Cutter Model SGSF 125-3-1.250K Measures 5" x 3/32" Thickness 8 Station 1-1/4" Bore Max 640 RPM Includes Carbide Inserts Pictured No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately ... morefollowing auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
ISCAR MODEL SDN D5.0-0.50-12-10 INDEXABLE MILLING CUTTER 5" DIAMETER X 1-1/2" BO
Iscar Indexable Milling Cutter Staggered Tooth Model SDN D5.0-0.50-12-10 Measures 5" x 1/2" Thickness 12 Station 1-1/2" Bore Includes Carbide Inserts Pictured- NOTE. Missing Many No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. ... moreI f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
ISCAR INDEXABLE MILLING CUTTER 3-1/4" DIAMETER W/ 1-1/4" STRAIGHT SHANK ARBOR
Iscar Indexable Milling Cutter w/ Straight Shank Arbor Cutter Measures 3-1/4" x 1/8" Thickness 6 Station. Includes Carbide Inserts Pictured Includes 1-1/4" Straight Shank Arbor No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. ... moreI f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
ISCAR SELF-GRIP PARTING AND GROOVING TOOL - SEE PHOTO FOR INCLUDED ITEMS
ISCAR SELF-GRIP PARTING AND GROOVING TOOL- SEE PHOTO FOR INCLUDED ITEMS CONDITION: Used/ See Photos/ Normal Wear and Tear Good Working Condition: Owner Markings: NO Will Combine Shipping– Request Invoice for final total Cleck Here to Check Out my Ebay Store Please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used and most times it is. Should there be a shipping difference of more than $.50 that money will be immediately refund. Please e-mail with questions.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14a04ac5bb6-0x109-
|
|
|
HM90 F90AP D4.00 9 1.50 ISCAR MILLING CUTTER
ISCAR Milling Cutter HM90 F90AP D4.00-9-1.50 4" dia. cut Used only once- In Good shape. Comes with everything pictured. Uses HM90 APKT 1003. inserts. Only ship in lower 48 states.
|
|
|
ISCAR CUT-OFF GROOVING INDEXABLE TOOLHOLDER - #SGTFL 25.4-3
Note: Xpresstooling announces that it will be named xpresstoolsinc effective immediately. The name and eBay site change is part of an ownership restructuring plan. We will continue to offer great quality tooling at affordable prices and maintain the highest level of customer service. Our previous page had a positive feedback score of over 1200 which we earned by providing good products. Fair shipping prices, fast shipping times and most importantly great customer service. The commitment to our customers will not change. We hope we can continue to earn your business and if we haven't yet. Please give us the opportunity to so. We are still located at 1520A Industrial Park St. Covina, CA 91722 and our phone number is still 626-331-6655. Thank you and please buy with confidence. Made by Iscar. This is a Cut-Off Grooving Indexable Toolholder ... morein good condition. Model# SGTFL 25.4-3 SPECIFICATIONS: Shank: 1" x 1" Overall Length: 6" Replacement Inserts: 4 Comes exactly as shown in pictures.
|
|
|
ISCAR SELF-GRIP SGFH 32-4 BLADE FOR GFN/L/R CARBIDE INSERTS
ISCAR SELF-GRIP SGFH 32-4 BLADE FOR GFN/L/R CARBIDE INSERTS USED see pics LY-04-R1
|
|
|
Iscar Trigon MWLNR 16-4
Iscar Trigon MWLNR 16-4 Item is being SOLD AS IS Brand: ISCAR Model: MWLNR 16-4 Made in Israel Dimensions Weight Flat Rate Padded Envelope Condition: Used CONTACT SELLER FOR ALL INTERNATIONAL SHIPPING INFORMATION Machines are subject to ACT Inc’s terms& conditions below and notes: The goods sold are second hand goods and ACT. Inc. Therefore makes no warranty of any kind, and sells goods“As is, As inspected, And“With all faults” ACT, Inc. makes no warranty of any kind whatsoever, Specifically any warranty of merchantability or fitness for a particular purpose. ACT, Inc. disclaims any reliance by buyer on ACT Inc’s skill, or judgment to select or furnish the goods for any particular purpose, expressed or implied. Customer is responsible for all shipping& rigging costs. TANDARD TERMS AND CONDITIONS OF SALE TERMS: All payments must be ... morereceived within 10 business and prior to shipment of machine. All sales in CA are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such a tax. A 1-1/2% monthly service charge will be added to all balances 30 days past due. Payments: ACT Machinery. Inc. accepts all major credit cards: Visa, Master Card, and American Express. We also accept Pay Pal as payment of goods purchased. SHIPPING; Customer Is Responsible For All Packaging. Shipping& Rigging Costs. No International Shipping. TITLE: Title shall not pass to Buyer upon delivery of the goods. But shall remain vested in Seller until the entire purchase price and applicable taxes are paid in full. A 1-1/2% monthly service charge will be added to all balances past due. INDEMNIFICATION: Buyer agrees to indemnify. Hold harmless and defend Seller, its subsidiaries, affiliates or agents of and from any and all claims or liabilities involving, or alleged to involve, these goods, which are caused by acts or omissions of the Buyer, his empl
|
|
|
ISCAR Indexable Grooving Toolholder SCHR 12.7-6B
SCHR 12.7-6B ISCAR GROOVING AND TURNING HOLDER Item is being SOLD AS IS Brand: ISCAR Model: SCHR 12.7-6B Includes one insert NTR007 IC1008 Please take note* Item has never been used however it is not in original packaging Dimensions Weight Small Flat Rate Box Condition: Used CONTACT SELLER FOR ALL INTERNATIONAL SHIPPING INFORMATION Machines are subject to ACT Inc’s terms& conditions below and notes: The goods sold are second hand goods and ACT. Inc. Therefore makes no warranty of any kind, and sells goods“As is, As inspected, And“With all faults” ACT, Inc. makes no warranty of any kind whatsoever, Specifically any warranty of merchantability or fitness for a particular purpose. ACT, Inc. disclaims any reliance by buyer on ACT Inc’s skill, or judgment to select or furnish the goods for any particular purpose, expressed or implied. Customer ... moreis responsible for all shipping& rigging costs. TANDARD TERMS AND CONDITIONS OF SALE TERMS: All payments must be received within 10 business and prior to shipment of machine. All sales in CA are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such a tax. A 1-1/2% monthly service charge will be added to all balances 30 days past due. Payments: ACT Machinery. Inc. accepts all major credit cards: Visa, Master Card, and American Express. We also accept Pay Pal as payment of goods purchased. SHIPPING; Customer Is Responsible For All Packaging. Shipping& Rigging Costs. No International Shipping. TITLE: Title shall not pass to Buyer upon delivery of the goods. But shall remain vested in Seller until the entire purchase price and applicable taxes are paid in full. A 1-1/2% monthly service charge will be added to all balances past due. INDEMNIFICATION: Buyer agrees to indemnify. Hold harmless and defend Seller, its subsidiaries, affiliates or agents of and from any and all claims o
|
|
|
ISCAR HIGH SHEAR FACE MILL F45NM D50 08-1.5-R08
ISCAR CUTTER F45NM D50 08-1.5-R08 2 INCHES TALL5.5 INCHES DIAMETER 8 CUTTERS. LIGHTLY USED. GREAT SHAPE FREE SHIPPING US SHIPPING ONLY(419) 834-1284 FOR QUESTIONS
|
|
|
ISCAR SGFH-32-2 One PARTING BLADE ,CUT OFF BLADE
You are bidding a used parting tool which has only one slot which appears to be useful. That is on the left as the right portion is partially broken. This item came in a box lot of stuff and I think there is someone out there who could use this at a fire sale price. If you find the item is no good after purchasing it you may ship it back for a full refund. Thanks for looking and happy bidding. No international sales NO Returns accepted
|
|
|
ISCAR CARBIDE INSERTS & TOOL HOLDER GDMW 2.4 IC20/10 Pcs. PHSR-16-2.4 GROOVING
We deal mainly in pre-owned items. As a result and for that reason. They are USED(except if otherwise noted) Since the nature of pre-owned items is that there is always some normal aging and wear. You should assume that to be the case in our auctions. We are not experts in every field and it is the Buyers responsibility to ascertain the value of the item. So if additional information is required. Please contact us well in advance of the auction's conclusion with any questions prior to bidding by using eBay's messaging system.clicking on the"Ask seller a question" above. We will answer your questions promptly. We do not deliberately misrepresent our items and always attempt to thoroughly and accurately describe each item to the best of our capability. Still. We are human and subject to error. Consequently, something may slip ... morepast us. To prevent misconceptions about our items. We provide large photos for viewing in case we missed something. Picture: DESCRIPTION: Up for auction is a ISCAR INSERTS& GROOVING TOOL LOT This lot consists of 10 inserts one is USED and in the tool holder PHSR-16-2.4 which was also USED 9 inserts remain in the pack NEW! Get this at a great savings here a new set lists over $350.00 Take a look at pics and then bid! We are not expert appraisers and the grading method is not intended to be authoritative or all-inclusive. But only a subjective guide. Our opinion of"Mint. Near-Mint, Excellent, Very Good, Good, Fair, Poor" may vastly differ from yours. CONDITION: Very Good NEW& USED Lot Once you are notified by email that you are the winner of the auction. You can arrange payment via PayPal. We accept e-check and credit card payments through PayPal. All payments must be made in US dollars. Full payment must be received within three(3) days of the auction's ending. Non-Payment/ Non-Contact A winning bid is a binding contract. All transactions not completed within five(5) days of the auction’s closing date will be cancelled and an unpaid item dispute report w
|
|
|
ISCAR Pentacut PCHR 16-24
PCHR16-24 ISCAR Item is being SOLD AS IS Brand: ISCAR Pentacut Model: PCHR 16-24 Includes one insert Dimensions Weight Small Flat Rate Box Condition: Used CONTACT SELLER FOR ALL INTERNATIONAL SHIPPING INFORMATION Machines are subject to ACT Inc’s terms& conditions below and notes: The goods sold are second hand goods and ACT. Inc. Therefore makes no warranty of any kind, and sells goods“As is, As inspected, And“With all faults” ACT, Inc. makes no warranty of any kind whatsoever, Specifically any warranty of merchantability or fitness for a particular purpose. ACT, Inc. disclaims any reliance by buyer on ACT Inc’s skill, or judgment to select or furnish the goods for any particular purpose, expressed or implied. Customer is responsible for all shipping& rigging costs. TANDARD TERMS AND CONDITIONS OF SALE TERMS: All payments must be ... morereceived within 10 business and prior to shipment of machine. All sales in CA are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such a tax. A 1-1/2% monthly service charge will be added to all balances 30 days past due. Payments: ACT Machinery. Inc. accepts all major credit cards: Visa, Master Card, and American Express. We also accept Pay Pal as payment of goods purchased. SHIPPING; Customer Is Responsible For All Packaging. Shipping& Rigging Costs. No International Shipping. TITLE: Title shall not pass to Buyer upon delivery of the goods. But shall remain vested in Seller until the entire purchase price and applicable taxes are paid in full. A 1-1/2% monthly service charge will be added to all balances past due. INDEMNIFICATION: Buyer agrees to indemnify. Hold harmless and defend Seller, its subsidiaries, affiliates or agents of and from any and all claims or liabilities involving, or alleged to involve, these goods, which are caused by acts or omissions of the Buyer, his empl
|
|
|
ISCAR F86LNX D2.5-06-1.00-R-N11
Used in Box. Includes 10 polished inserts. 4 new/6 with 1 corner used
|
|
|
ISCAR - 3105550 - CARBIDE INDEXABLE HIGH FEED END MILL
USED AND SHOWS SIGNS OF WEAR(SEE PHOTOS) Indexable High-Feed End Mills; Cutting Diameter(Decimal Inch) 1.2500; Maximum Depth of Cut(Decimal Inch) 0.0430; Shank Type: Straight Shank; Shank Diameter(Decimal Inch) 1.2500; Number of Cutter Inserts: 4; Insert Style: H600 WXCU 05. Cutting Diameter(Decimal Inch) 1.2500 Maximum Depth of Cut(Decimal Inch) 0.0430 Shank Type Straight Shank Shank Diameter(Decimal Inch) 1.2500 Shank Length 5.7785 Number of Cutter Inserts 4 Insert Style H600 WXCU 05 Toolholder Style FF EWX-05 Insert Holding Method Screw Weldon Flat(Yes/No) Yes End Mill Type End Mill Minimum Cutting Diameter(Decimal Inch) 0.8600 Through Coolant(Yes/No) Yes,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-14a374dd21b-0x102-
|
|
|
MACHINIST LATHE TOOLS LOT OF 29 CARBIDE TIP CUTTING BITS DO ALL, CARBOLOY ,ISCAR
MACHINIST LATHE TOOL.ASSORTED LOT OF 29 CARBIDE TIP CUTTING BITS
|
|
|
ISCAR 1" X 8" LONG INDEXABLE HOLDER HM90
SELLING 1 USED GREAT CONDITION ISCAR CARBIDE INSERT HOLDER. COMES WITH 2 INSERTS MOUNTED AND 9 MORE NEW ONES IN BOX. SHIPS TO USA ONLY. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-14a3e892dc6-0x107-
|
|
|
Iscar Its-Bore BHR MB80-80x140
Listed is an Iscar BHR MB80-80x140 boring head. Used for the boring of large holes from 120-200mm(4.724"7.874" Note: Boring head does not coming with tool cutters
|
|
|
ISCAR ITS-BORE ETM PRECISION BORING HEAD BHFI MB-50.0001 CAT 40 NICE
This is a ISCAR CAT-40 modular system boring head.It's got V-grooves where you can exchange tips and extensions.It gives you the capability to change insert styles by changing the holder tip only. It's basically a 4 piece setup.Graduation is.0001.Diameter is 2"It's in super shape probably used very little.I've been a machinist for 30 years and if you have any questions.I'm sure I will be able to answer them.I'm just trying to help a friend out who doesn't do E-Bay and I will be listing quite a few machinist tools so please check my auctions in a few days.FREE Expedited shipping in the 48 US states.Thanks for looking!
|
|
|
ISCAR INDEXABLE TURNING & GROOVING TOOL HOLDER MODEL MVJNR 16-3 1" SHANK
Iscar Indexable Turning& Grooving Tool Holder Model MVJNR 16-3 1" Square x 6" Length Shank No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business ... moreday. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
ISCAR DCM 150-045-20A 15 Insert Tip .622" Cham Drill
LEGACY MACHINE WORKS. LLC Rebuilds. Parts, On Site service and repair, electrical/PLC controls and Upgrades, Engineering and turnkey set ups on the following equipment: Hydromat rotary transfer machines Acme. Davenport, Euroturn, Index Multi spindles All Brands of CNC Lathes and Mills Make your machines work your way! KRIS 812-290-1975 ERIC 812-560-9006 legacymachineworks.com SED Good Condition. ISCAR DCM 150-45-20A Comes as pictured
|
|
|
USED ISCAR INSERT DRILL DCM .0630-189-075A-30 4-1/2" X 2" FLUTE 3/4" SHK 1163
YOU ARE BIDDING ON ONE USED ISCAR INSERT DRILL DCM.0630-189-075A-30 4-1/2" X 2" FLUTE 3/4" SHK DO NOT PAY BEFORE RECIEVING INVOICE ON MULTIPLE ITEMS. YOU MAY NOT RECIEVE SHIPPING DISCOUNT IF YOU DO. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ISCAR 5" INDEXABLE SLOT GROOVING CUTTER W/ ISCAR 1-1/4" BORE SHELL ADAPTER
Iscar Indexable Slot Grooving Cutter w/ 1-1/4" Bore Shell Adapter Model SGSF125-3-1.250K 5" Diameter Shank for 1-1/4" Bore No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item ... morewill be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14a655bd0df-0x10a-
|
|
|
Iscar Heli-Grip Grooving Bar, HELIIR-25.4C-410, 5ct GRIP 4002Y Inserts, IC908
Iscar Heli-Grip grooving and turning tool. Part# HELIIR-25.4C-410 with 5ct GRIP 4002Y IC908 new inserts. The grooving tool is in good used condition, it has been used and has dings and marring from use but it is good working condition.
|
|
|
ISCAR Slot Milling Cutter SGSF 160-6-1.500K
ISCAR Slot Milling Cutter SGSF 160-6-1.500K
|
|
|
LOT OF ASSORTED INDEXABLE END MILLS & FACE MILL VALENITE ISCAR
Lot of Heavy Duty Indexable Cutting Tools 3/4" 1" Shank End Mills Iscar& Others Valenite Face Mill 1-1/4" Bore 3" Dia Note: All need screws or clamps No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately ... morefollowing auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
COOLANT FED INDEXABLE END MILL 1" CUT 1" SHANK ISCAR TYPE INSERTS AOGT
Thank You For Looking At Our Products Product Information: Coolant Fed Indexable End Mill Product Features& Specifications: 1" Cut Diameter 3 Station 1" Shank 6" Overall Tool Length Includes(3) Mitsubishi Solid Carbide Inserts Model AOGT123608PEFR-GM TF15 Product Code: 14122216
|
|
|
ISCAR 2.0" SHREDMILL FRW D153A200-5-.75-12
ISCAR SHREDMILL 2.0" Diameter with a set of RCMT Inserts Description: FRW D153A200-5-75-12 Arbor size.75" This item is Brand New! We accept Paypal only and combine shipping when possible. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ISCAR INDEXABLE CHAMDRILL BODY DCM 0492-246-063A-5D
LIKE NEW ISCAR INDEXABLE CHAMDRILL BODY DCM 0492-246-063A-5D With NEW Insert Included Offer international shipping. Accept PayPal. THANKS FOR BIDDING. PLEASE CHECK OUT MY OTHER AUCTIONS. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14abb87237f-0x107-
|
|
|
ISCAR GHMUL 31.7 TOOL HOLDER
ISCAR GHMUL 31.7 TOOL HOLDER EXCELLENT CONDITION GOOD LUCK. SHIPPING& HANDLING USA FREE.
|
|
|
ISCAR T490 E90LN D1.00-3-C1.00-B
7.800 overall length X 1" endmill with coolant through cylindrical shank- uses insert T490LNMX0804PN-R. Used in box! Good Condition.
|
|
|
Iscar 2"Mill & CT40 & 5X Inserts Excelllent!
Iscar Mill& Cat-40 Holder& Inserts Here is an excellent package for your milling machine. Included are: Iscar HM90 F90A D2.00-5-75 Holds five inserts. Command Cat-40 shell mill holder with.750 pilot. Five used inserts included. Style ADKT-1505 5x pcs. 5/16-24 locking bolt included and an extra screw for the cutter. All Tooling is in excellent condition. Very clean. Ready to go. This is well over a $750.00 value. Don't pass up this offer. I'm starting the bidding at $138.95
|
|
|
ISCAR f90AX-D200-.75-20 2" Shell Fly Cutter 3/4" Arbor Carbide Insert
Happy Ebaying. Please see my other auctions for more great items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Iscar GFI ST 1 ER32 Floating Reamer Collet Chuck with Cylindrical Shank Used
The listing price is for one. Original Packaging or Containers May Not Be Included Even If Pictured. Offers& emails: I will respond to all Offers and Email Messages Monday through Friday until 2:00pm Central Time. We are closed Weekends& Holidays. Offers expire within 48 hours. So if an offer is made after 2:00pm on Friday, it will expire before I am able to respond. PayPal: We accept instant PayPal payment or credit/debit card through PayPal. Payment in full is expected within 3 days after purchase or product availability will not be guaranteed after 5 days. All orders will be processed within 3-5 business days. Payments received Thursdays after 2pm Central Time and Fridays. Weekends and Holidays will be processed on the next available business day. Item Information: Some items sold may have customer engravings on tools. But this ... moredoes not affect the quality of the tool. Some pictures may show other items, but only the items described are included(i.e. carbide inserts, rulers, original packing, tools, etc. If the item is listed as"Seller Refurbished" or"Regrind" please be aware that exact dimensions of the tool may have changed in the grinding process and for special orders. Please ask questions before buying if this is a concern. From time to time, items have been misplaced or put back in use. We apologize for this in advance and will refund your money promptly if this happens. Refunds/Exchanges: We offer a 14-day Money Back Guarantee. Any items needed returned will receive a full refund(or if you prefer an exchange) And must be in the condition it was sold. Please advise us of any problems with purchases before returning or leaving feedback. We are here to make sure that you are a happy customer. We will pay the postage for all returns. Sales Tax: Please be aware that our company has a Physical Presence(Nexus) in AL. AZ, CA, CO, CT, FL, GA, IA, KS, KY, LA, MA, MI, MN, MS, MO, NY, NC, ND, OH, SC, TN, TX, VT, VA, WA and is required by law to collect and remit sales tax for all on-line
|
|
|
23mm ISCAR DCM 3xD Indexable Coolant Thru Drill Body *NO RESERVE* N 859
ISCAR DCM 230-069-25A-5D 23mm 3xD DCM Style Indexable Drill Body Coolant Thru uses 23-23.9mm Inserts SATISFACTION GUARANTEED Save BIG with Combined Shipping Checkout My Other! Posted with
|
|
|
17mm Ingersoll Iscar DCM Indexable Coolant Thru Drill Body *NO RESERVE* N 857
Ingersoll#Y0100090 C8R01 17MM DCM Style Indexable Drill Body Coolant Thru Compatible with older style Iscar DCM Drills SATISFACTION GUARANTEED Save BIG with Combined Shipping Checkout My Other! Posted with
|
|
|
.669"- .705" Ingersoll Iscar DCM Indexable Coolant Thru Drill Body *NR* N 856
Ingersoll.669" 705" DCM Style Quick Twist Indexable Drill Body Coolant Thru Compatible with older style Iscar DCM Drills SATISFACTION GUARANTEED Save BIG with Combined Shipping Checkout My Other! Posted with
|
|
|
.511"- .527" Ingersoll Iscar DCM Indexable Coolant Thru Drill Body *NR* N 855
Ingersoll.511" 527" DCM Style Quick Twist Indexable Drill Body Coolant Thru Compatible with older style Iscar DCM Drills SATISFACTION GUARANTEED Save BIG with Combined Shipping Checkout My Other! Posted with
|
|
|
.827" Ingersoll Iscar DCM Indexable Coolant Thru Drill Body *NR* (N 846)
Ingersoll.827" DCM Style Indexable Drill Body Coolant Thru Compatible with older style Iscar DCM Drills SATISFACTION GUARANTEED Save BIG with Combined Shipping Checkout My Other! Posted with
|
|
|
Iscar SGTBK 32 - 9 Tool Block Blade Holder
You are purchasing a used Iscar SGTBK 32- 9 Tool Block Blade Holder. Please add this item to your cart and request an invoice for combined shipping if you're purchasing other items from me.
|
|
|
ISCAR F90SD D 50-22 -12 FACE MILL sandvik ceratizit
ISCAR F90SD D 50-22-12 90* FACEMILL INSERT SSDMT1205(not included) Used but in excellent condition Has minor cosmetic scratches only Please ask any questions Bid with confidence Thanks
|
|
|
ISCAR T490LNHT130664PTNR IC808 USED ONE SIDE EDP 56005998 LOT OF TEN
I DO NOT WANT TO THROW IN THE SCRAP BIN WITH A GOOD SIDE AVAILABLE ON ALL INSERTS THESE NORMALLY SELL AROUND $25.00 EA NEW MAYBE YOIU CAN USE THE GOOD EDGE di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-14ada347ba2-0x101-
|
|
|
ISCAR HELIDO 28328 Indexable High Feed Milling Cutter 1.25 shank X1.5. Diameter
Iscar helido 28328 H490 E90AX D1.5\3\W1.25\17\C Insert torc wrench SW6\T +T20\M7 Screw SR 14\590 Insert H490 ANKX 170608 PNTR
|
|
|
ISCAR Indexable Grooving Toolholder GHSR 9.5-2 (used once)
ISCAR Indexable Grooving Toolholder(used once) with used insert. No wrench GHSR 9.5-2 Type: External Hand: Right Hand Max Depth of Cut: 7500" Min Groove Width: 0.0870" Overall Length: 4.7200" Insert Compatibility: GIG; GIM; GIP; TIP
|
|
|
FF FWX D3.00-06-1.25-08 HELIDO (HIGH FEED FACEMILL) Iscar Brand
Reconditioned NEW/ Missing Box/ 6 sided Insert cutter/ Missing Screws. Appears to have a coating when it was reconditioned but it is a new manufactured refurbished cutter.
|
|
|
Iscar E60 D1.00 - W - .75 Indexable Chamfer & Angle Endmill
Description Iscar E60 D1.00- W- 75 Indexable Chamfer& Angle Endmill Good Condition Payment Payment must be made within 3 days of purchase. Shipping Shipping will be by FEDEX Ground. USPS Priority, or Freight Terms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools and metalworking equipment. precision inspection equipment. testing and measurement equipment. construction ... moreequipment.and more. We are committed to 5-star service. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions.
|
|
|
Iscar Indexable Drill DCM 160-480-20A-3D (.788" Shank 20mm) (.642 Dia 16.3mm)
Hardly Used At All Iscar DCM 160-048-20A-3D Indexable Drill With Clamping Key.788" Shank = 20mm.642 Dia = 16.3mm Pictures Are The Actual Item You Will Receive. Please Pay With PayPal Only. Make Payment Within 3 Days After Winning Bid. Thank You. I Do My Best To Describe Items. Please Look At Photos As They Are Part Of My Description Please Ask Questions If You Are Unsure About Anything. I Will Always Combine Shipping When I Can To Save The Buyer Money& Ship Without Damage To Items. Happy Bidding
|
|
|
Iscar 7/8" Diam. x 12" index-able precision Turning & Boring Bar / Lathe Tool
7/8" x 12" Iscar index-able precision Turning& Boring Bar/ Lathe Tool A-MWLNR 16-3W Accept Coolant Thru Tool 12" x 9" x 6" Shipping Box Shipping Weight 3 Lbs. Another No Reserve Auction From Wigglesworth Machinery! Payment must be made in U.S. Dollars. We accept Paypal. Company and personal checks, cashier's checks, money orders or wire transfers. Company or personal checks require sufficient time to clear before shipment can be made. All documentation, costs or fees associated with export of items outside USA shall be buyer's responsibility. Winning bidder please respond within(3) days from close of auction. Shipping: Buyer responsible for all cost associated with shipping. These items are boxed for UPS Ground shipment. Shipping can be estimated and calculated online at UPS.com. We will contact you regarding ... moreshipping charges when the auction is over. Additional Packing fee of $2.99 will apply to this lot. Note: Combined purchases on the same day may be shipped together however the packaging fees will apply to each individual auction. Convenient shipping estimation from OH 44460 can be obtained at www.ups.com Happy Bidding! Seller reserves the right to cancel auction due to local sale
|
|
|
ISCAR DGTR 20B-3D40 Cut Off Carbide Inserts Holder cnc lathe DGN DGR
Great Deal! ISCAR DGTR 20B-3D40 Shank: 20mm Total Length: 140mm ITEM IS USED AND COMES FROM WORKING CONDITION. Buy from a trust seller! Checkout our feedback! We accept PayPal only. Please clear payment in 2 days. We ship worldwide with standard air mail. All custom and fees are the buyer responsibility. For Ems shipping rates please contact me. Our business work since 1990 and sell wholesale and individuals micro tools. And industry equipment to all over the world! We have in stock all sizes of micro drills. Micro endmills, and others 1/8 shank tools. Our goods is the BEST QUALITY in the market, and check well before shipping to keep you. As our customers satisfied! We Believe that high quality tools. Good service, good customer support. And fast handling time, are the keys for success! Your satisfaction is in our first priority. Please ... morefeel free to with any questions. and don't forget to, and make sure to! Thanks for your business! ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14af3d56644-0x115-
|
|
|
70 lbs end mills 3/4 1'' 5/8'' xl length osg iscar SCRAP CARBIDE many great cond
Scrap carbide but plenty of these end mills or in great shape and can still be used or sharpened brand new this is a great buy for anyone who does a lot of heavy roughing
|
|
|
Iscar Carbide .625 Diameter Single Flute with Inserts
Various inserts with a iscar single end carbide chipper and also a 3/4 shank 3 insert chipper Mitsubishi ceratip iscar and sanvick inserts Thanks Ken
|
|
|
.709" - .744" ISCAR DCM Indexable Coolant Thru Drill Body *NO RESERVE* N 922
ISCAR DCM 0709-254-100A-5D.709" 744" DCM Style Indexable Drill Body Coolant Thru Compatible with older style Iscar DCM Drills SATISFACTION GUARANTEED Save BIG with Combined Shipping Checkout My Other! Posted with
|
|
|
ISCAR SCLCR-12-3
ISCAR SCLCR-12-3 I ncludes everything as seen in picture ISCAR SCLCR-12-3 Includes one insert, Dimensions Weight Small Flat Rate Box Condition: Used* Contact seller for international shipping Machines are subject to ACT Inc’s terms& conditions below and notes: The goods sold are second hand goods and ACT. Inc. Therefore makes no warranty of any kind, and sells goods“As is, As inspected, And“With all faults” ACT, Inc. makes no warranty of any kind whatsoever, Specifically any warranty of merchantability or fitness for a particular purpose. ACT, Inc. disclaims any reliance by buyer on ACT Inc’s skill, or judgment to select or furnish the goods for any particular purpose, expressed or implied. Customer is responsible for all shipping& rigging cost STANDARD TERMS AND CONDITIONS OF SALE Contact Information ACT Machinery Phone: 714-441-1992 ... moreTERMS: All payments must be received within 10 business and prior to shipment of machine. All sales in CA are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such a tax. A 1-1/2% monthly service charge will be added to all balances 30 days past due. Payments: ACT Machinery. Inc. accepts all major credit cards: Visa, Master Card, and American Express. We also accept Pay Pal as payment of goods purchased. SHIPPING; Customer Is Responsible For All Packaging. Shipping& Rigging Costs. No International Shipping. TITLE: Title shall not pass to Buyer upon delivery of the goods. But shall remain vested in Seller until the entire purchase price and applicable taxes are paid in full. A 1-1/2% monthly service charge will be added to all balances past due. INDEMNIFICATION: Buyer agrees to indemnify. Hold harmless and defend Seller, its subsidiaries, affiliates or agents of and from any and all claims or liabilities involving, or alleged to involve, these goods, which are caused by acts o
|
|
|
.433" - .448" Ingersoll Iscar DCM Indexable Coolant Thru Drill Body *NR* N 938
Ingersoll Y043021C0R01.433" 448" DCM Style Quick Twist Indexable Drill Body Coolant Thru Compatible with older style Iscar DCM Drills SATISFACTION GUARANTEED Save BIG with Combined Shipping Checkout My Other! Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14b0f70887c-0x105-
|
|
|
10.8MM .425" Ingersoll Iscar DCM Indexable Coolant Thru Drill Body *NR* N 937
Ingersoll Y041020C0R01 10.8MM.425" DCM Style Quick Twist Indexable Drill Body Coolant Thru Compatible with older style Iscar DCM Drills SATISFACTION GUARANTEED Save BIG with Combined Shipping Checkout My Other! Posted with
|
|
|
13.5mm- 13.9mm Ingersoll Iscar DCM Indexable Coolant Thru Drill Body *NR* N 936
Ingersoll YD1350067C0R01 13.5mm- 13.9mm DCM Style Quick Twist Indexable Drill Body Coolant Thru Compatible with older style Iscar DCM Drills SATISFACTION GUARANTEED Save BIG with Combined Shipping Checkout My Other! Posted with,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14b0f7087b2-0x10b-
|
|
|
.6299" -.6654" Ingersoll Iscar DCM Indexable Coolant Thru Drill Body *NR* N 935
Ingersoll.6299" 6654" DCM Style Quick Twist Indexable Drill Body Coolant Thru Compatible with older style Iscar DCM Drills SATISFACTION GUARANTEED Save BIG with Combined Shipping Checkout My Other! Posted with
|
|
|
.709" - .744" Ingersoll ISCAR DCM Indexable Coolant Thru Drill Body *NR* N 933
ISCAR Ingersoll YD 1800054C8R01.709" 744" Indexable Drill Body Coolant Thru Compatible with older style Iscar DCM Drills SATISFACTION GUARANTEED Save BIG with Combined Shipping Checkout My Other! Posted with g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14b0f7087e7-0x11c-
|
|
|
Iscar Turning Tool SLANL 20-15 TANG
Used iscar turning tool in excellent condition. Insert is chipped from handling but toll has never been crashed.
|
|
|
Iscar Chamdrill .669 Carbide - DCN 0669-335-075A-5D
Gently used Iscar.669 Chamdrill. See pics.
|
|
|
Iscar Chamdrill DCN 0531-266--063A-5D
531" D Iscar chamdrill. Has been used but there is no damage to it. Please see my other auctions.
|
|
|
ISCAR SRGOL 16-10 CNC MACHINE TOOL HOLDER TOOLING ROUND CUTTER CARBIDE INSERT
LEFTHAND ISCAR SRGOL 16-10 Israel CNC MACHINE CARBIDE TOOL HOLDER 1" x 1" Tool Holder 6" Long. Will need inserts and a insert spacer.
|
|
|
ISCAR REPLACEABLE TIP DRILL COOLANT THROUGH 5/8" SDIA 4.75" OAL(LOC1353A)
SAVE BIG MONEY! DCM 0492 246 063A 58D I ship 6 days a week. I offer money back guarantees. I will always combine shipping. I also have large quantities of lathe tool holders. Boring bars, and face mills. Please email if interested. INTERNATIONAL SHIPPING PRICE VARIES FOR ANY QUESTIONS PLEASE CALL JASON PUURI AT 517-420-5401 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Iscar E90AP-D3.00-1.00 Milling Cutter - Stock # 0704
Used CNC Parts* Specializing in selling quality used parts Description: Iscar E90AP-D3.00-1.00*Insert Mounting Screws& Inserts Included* Item Number: 0704*Returns are not excepted* Sign up for my email newsletters by adding my eBay Store to your Favorites Looking for Quality CNC Machines visit www.ABLTechnology.com
|
|
|
ISCAR LATHE TOOL HOLDER -- HFHR-25-48-4T25 --
MADE IN ISRAEL-NEW ISCAR TOOL HOLDER HFHR-25-48-4T25
|
|
|
ISCAR SGSF 125-5-1.250K 640 RPM Self Grip Slotting Cutter Carbide Tips Milling
ISCAR SGSF 125-5-1.250K 640 RPM Self Grip Slotting Cutter Carbide Tips Milling Selling With No Reserve! Hi! I have for Auction here a ISCAR SGSF 125-5-1.250K 640 RPM Self Grip Slotting Cutter Carbide Tips Milling. Item is in used condition. See Pictures. Get yourself a great deal here. Free shipping to the lower 48 States. Local pick-up is always welcome. But I require cash payment or there will be a $25 fee or 10% whichever is greater! I will combine shipping if you buy multiple items. But I can't send the combined invoice until Monday afternoon. Do not pay for the items before you recieve the combined invoice because I will not refund any money after items are paid. For more information you can call Steve at: 989-802-9508. Please feel free to contact me if you have any questions! Thanks for looking and Happy Bidding! Payment is expected ... morewithin 5 days. We appreciate your prompt payment. We accept payment thru Pay-pal. Cash is required for pick-up items or a $25 fee.please contact us for details or if you have questions. Steve Lehman 989-802-9508 Standard Shipping: Our items are shipped U.S. Postal Service or Fedex. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the buyer of multiple items and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 30 days. After 30 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold"as is" with
|
|
|
Iscar Indexable Grooving Blade, CGPAD 3L-T16, 2801128, Used
Iscar Indexable Grooving Blade. CGPAD 3L-T16, 2801128. Purchased these blades for a project. Once the project ended, we had a surplus of these blades. These Cut-Off Blades are used and are in their original box and only used a few times. Please note: we did have Iscar modify the toolholder width to.075 inches for us. Specs: Cut-Off& Grooving Support Blades for Indexables; Cutting Direction: Left Hand; Insert Width(mm) 4.00; Insert Width(Decimal Inch) 0.1575; Maximum Depth of Cut(mm) 16.00; Maximum Depth of Cut(Decimal Inch) 0.6299; Series: Cut Grip; Modular Grip; Modified Toolholder Width(Decimal Inch) 075. Cutting Direction Left Hand. Insert Width(mm) 4.00. Insert Width(Decimal Inch) 0.1575. Maximum Depth of Cut(mm) 16.00. Maximum Depth of Cut(Decimal Inch) 0.6299. Series Cut Grip; Modular Grip. Head Length/Projection(mm) 5.20. Head ... moreLength/Projection(Decimal Inch) 0.2047. Modified Toolholder Width(Decimal Inch) 075.
|
|
|
ISCAR COOLANT-FED INDEXABLE HEAD DRILL (WITH INSERT) LOT C11282
LOT C11282 WE ARE OFFERING A ISCAR COOLANT-FED INDEXABLE HEAD DRILL PART# 1D071 010NJ-E1R00938 INCLUDED INSERT: 0.705" 17.9 MM SHANK DIAMETER: 3/4" OVERALL LENGTH: 8-1/2" ANY QUESTIONS ABOUT OUR LISTED ITEMS CALL OFFICE: 937) 320-2298 CELL: 937) 672-9876 WE HAVE MUCH MORE TOOLING LISTED AND WILL BE LISTING MUCH MORE. CLICK LINK BELOW TO Visit My eBay Store! CLICK LINK BELOW TO ADD US TO YOUR favorites list!
|
|
|
ISCAR COOLANT-FED INDEXABLE HEAD DRILL (WITH INSERT) LOT C11283
LOT C11283 WE ARE OFFERING A ISCAR COOLANT-FED INDEXABLE HEAD DRILL PART# 1D071 010NJ-E1R00938 INCLUDED INSERT: 0.705" 17.9 MM SHANK DIAMETER: 3/4" OVERALL LENGTH: 8-1/2" ANY QUESTIONS ABOUT OUR LISTED ITEMS CALL OFFICE: 937) 320-2298 CELL: 937) 672-9876 WE HAVE MUCH MORE TOOLING LISTED AND WILL BE LISTING MUCH MORE. CLICK LINK BELOW TO Visit My eBay Store! CLICK LINK BELOW TO ADD US TO YOUR favorites list!
|
|
|
SHRINK FIT CAT 40 HOLDER. 1/2" / .500" I BELIEVE THIS IS MADE MY ISCAR
SELLING 1 USED. BUT VERY GOOD CONDITION 1/2" CAT 40 SHRINK FIT HOLDER. I AM 99% SURE THIS IS MADE BY ISCAR. S ON HOLDER ARE THE FOLLOWING: CAT 40 SRK 1/2X3.25 E G2 5 25K RPM 4598418. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14b39288521-0x10a-
|
|
|
Iscar 3/4" E90A-D.75-W.75 Cutter w/box of 3 Miscellaneous Carbide Inserts
You are purchasing a lot of Iscar 3/4" E90A-D.75-W.75 Cutter w/box of 3 Miscellaneous Carbide Inserts. The cutter looks new. But it may have been used. The carbide Inserts are in a sealed brand new box. Please add this item to your cart and request an invoice for combined shipping if you're purchasing other items from me.
|
|
|
ISCAR .669 Cam Drill Body DCM0669-201-075A-3D w .697 Insert
ISCAR.669 Diameter ChamDrill Body with a.697 Insert Description: ISCAR DCM 0669-201-075A-3D Shank.750" We accept Paypal Only and combine shipping when possible. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ISCAR INDEXABLE FACE GROOVING TOOL HOLDER SGFFA 30-R-3 W/ CARBIDE INSERT
Iscar Indexable Face Grooving Tool Holder Model SGFFA 30-R-3 1-1/4" Shank x 3-1/2" Long Includes Original Packaging. Wrench, New Solid Carbide Insert Style GFN 3J No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately ... morefollowing auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund. Powered by SixBit's eCommerce Solution
|
|
|
1200lbs Lift Magnet/Workholding/Plate orRound Bar/Iscar/Sandvik/ingersoll/walter
Very minor imperfections and is in excellent working condition. Magnet surface 10" x 5" Lifts flat material or round bar. See my other listings Make an offer today. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-14b42d237d9-0x103-
|
|
|
1/2" X 6" OAL SI-SCLCR 8-3 BORING BAR WITH 2 ISCAR CARBIDE INSERTS
1/2" X 6" OAL SI-SCLCR 8-3 BORING BAR WITH 2 ISCAR CARBIDE INSERTS INSERT CASE NOT INCLUDED I guarantee all my sales. If I have missed something or the item is not as I described. Let me know within 5 days after you receive it and send it back to me in. The same condition you received it for a full refund. I AM LISTING A LARGE AMOUNT OF TOOLING THIS WEEK AT 99 cents AND WILL ALWAYS COMBINE LOTS FOR THE BEST FLAT RATE SHIPPING VALUE. I really appreciate your bids.
|
|
|
ISCAR TOOL HFFR 48-4 T 25
MADE IN ISRAEL-NEW ISCAR TOOL HFFR 48-4T25
|
|
|
Iscar E90AD-D1.25-w1.25 Indexable End Mill With 10 NEW ADKT150516R-HM Inserts
Like New Iscar Indexable 1 1/4" DIA. END MILL. Cutting Diameter:1 1/4 in. Three(3) Inserted Teeth End Mill. Includes One Box of 7 New Iscar ADKT150516R-HM in the BOX and 3 NEW INSERTS in the End Mill. Shank Diameter: 1 1/4 in. End Mill is 4 1/8" OAL Used but in Very Good Condition As you Can See in Photos(LIKE NEW) WE make every attempt to reveal what we know about the items we sell. The pictures help you to see the condition. So please view carefully. Questions are welcome if you have any concerns. Keep in mind items we sell are vintage and used so they are not in new condition and with items of age and not in NEW condition. We do not offer returns or partial returns.so. Again, if you have any questions, we will be happy to answer to the best of my knowledg e. All Sales are Final as pictured and described. NO PARTIAL REFUNDS, so ... moreplease view ALL PHOTOS AND DESCRIPTION FOR DETAILS. WE DO COMBINE WINNING AUCTIONS. FOR SAVINGS ON SHIPPING FEES! WE pack with care and ship in clean. NEW packaging materials. Paypal only. Please complete payment within 3-days close of auction so that I can finalize the transaction in a speedy manner and send your item to you. NOTE: We ship USPS PRIORITY MAIL ONLY FOR THIS ITEM. NO international bidders at this time. ~THANK YOU~
|
|