|
Vintage Atlas X/Y Milling & Drilling Table for drill press / lathe boring table
This is the Atlas X/Y table for use on a drill press. handles will be removed for secure.Fast priority mail shipping in a large flat rate box(domestic) This is not some cheap import x/y table; this is a quality piece of equipment that will allow you to position your work on the drill press to the thousanths of an inch. Works with any drill press that has slots in the table. Such as Atlas, Craftsman, South Bend, Delta, Clausing, Rockwell, Walker Turner or others. It is used and in very good condition. The height to the top of the flat surface is 4-3/4" These were made from Atlas lathe parts. So many of the parts are interchangeable with Atlas lathes. The table top is 7" square and has four t-slots. The table top can be used as a boring table on a 12" or 10" Atlas/ Craftsman lathe. The lower feed travels more than 3" ... moreWhile the upper one travels 4-1/2" that is the travel if you keep the entire slide in contact with the base- you can get more travel if you overhang) The base is 6"x7-1/4" and has 4 long slots for 3/8" bolts or mounting to your drill press table. Both screws are in excellent condition. The handles are in good shape. The graduations on both dials and on the base are in good condition but slightly rusty need careful cleaning. PLENTY OF PICURES. THANKS FOR LOOKING.CALL ME ON ANY QUESTIONS OR EMAIL,KEN 541-538-8219.
|
|
|
LOT OF 9 MILLING SAWS SLITTING SAWS for Atlas Craftsman South Bend Logan lathe
This listing is for a used lot of 9 milling saws. They all have a 1" bore with a 1/4" keyway. They are 2 1/2"3" in diameter. The thicknesses are.102" 2) 3/32" 3/16, 1/8" A, S, T and one I could not read. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
MORSE #2-3MT SLEEVE ADAPTOR Atlas Craftsman South Bend Logan Lathe FREE SHIP
FREE CONTINENTAL US SHIPPING Hi. All, Here is a used Morse Taper Sleeve Adaptor. MT2 on the Inside. MT3 on the outside. Has some light staining and a few minor scratches. Inside feels nice and smooth. Check out my other turning auctions going on right now. Please check out the pictures and ask any questions. I pack carefully and ship quickly. If the postal calculator is off by more than $2 I reimburse the difference. And will gladly combine shipping. I charge no packaging or handling fees. Not Happy? Return it. What you see is what you get. Check out my other auctions for some turning and lathe type things and who knows what else. Thanks Jeff
|
|
|
Metal Lathe L-W 3 jaw chuck,south bend 9" lathe,atlas lathe,1-1/2"-8 chuck
7-1/2" 3 jaw chuck made by the L-W chuck company. Chuck is in good condition.Inside and outside jaws. Outside jaws have some superficial rust that will clean off easily. Threaded 1-1/2"8 Posted with
|
|
|
Vintage1937 Atlas Press Co. Manual Of Lathe Operation & Machinists Tables
Vintage 1937 Atlas Press Co. Manual Of Lathe Operation& Machinists Tables. This manual contains 238 pages plus some extra pages for your shop notes. It also comes with two original inserts. This is in excellent shape. The cover shows a little wear but pages look great.
|
|
|
ORIGINAL 12" Atlas Craftsman lathe CAST IRON LEGS AND WOOD
This listing is for an original 12" Atlas Craftsman lathe stand. The wood is original and in great shape. It measures 57' long to accept the long beds. Local pick up only. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
ATLAS 10" & 12" LATHE INDEXABLE HEADSTOCK BULL GEAR P.N. 10-241
ORIGINAL ATLAS 10" CRAFTSMAN 12" METAL LATHE INDEXABLE HEADSTOCK BULL GEAR P.N. 10-241. GOOD SHAPE WITH IT SHOWING SOME WEAR/ DAMAGE TO THE INDEXING PIN HOLES BUT IT'S STILL FULLY FUNCTIONAL IN. PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO. REF. NO. OGC.A4)
|
|
|
Albrecht chuck #160-J6, for South Bend, Atlas, Sheldon lathe 1/8"- 5/8"
This is the real deal Albrecht chuck. Made in Germany, not a knock off Chinese clone. Capacity is 1/8" to 5/8" Very nice condition. Comes with a new Phase II arbor for#2 MT to#6 JT. Operates very smooth, For more info. See the page from MSC at: THIS ITEM WILL SHIP TO THE U.S. ONLY. This weighs 4 pounds and will ship from 60442 by Priority Mail. Ebay will calculate the postage. But I will refund any overage.
|
|
|
ORIGINAL ATLAS CRAFTSMAN 6 LATHE TAILSTOCK LOCK SLEEVE, BOLT and HANDLE 10100
Nice complete tailstock spindle lock. Thanks for looking.
|
|
|
ATLAS CRAFTSMAN 6 INCH # 10100 LATHE 560-194 SPINDLE PULLEY ASSEMBLY GOOD USED
This is nice and clean with a little tooth wear. Thanks for looking.
|
|
|
VERY NICE MT2 TRADE MARK LIVE CENTER FOR ATLAS CRAFTSMAN SOUTH BEND METAL LATHE
Very Nice MT2 Trade Mark Live Center for an Atlas. Craftsman, South Bend or Logan Metal Lathe. Arbor measures 2 11/16" long and total length is 5" long. Stamped with"MT2 TRADE MARK" If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NICE ORIGINAL ATLAS CRAFTSMAN 10" 12" LATHE 48 TOOTH CHANGE GEAR
Nice Original Atlas Craftsman 10" 12" Lathe 48 Tooth Change Gear. Teeth are in nice condition. Gear measures 3/4" bore and 3/8" thick. Gear is stamped with"40A" If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NICE HEADSTOCK SPINDLE THREAD PROTECTOR 4 ATLAS SOUTH BEND LATHE 1 1/2 X 8 TPI
Nice Headstock Spindle Thread Protector for a Atlas. Craftsman, South Bend, or Logan Lathe. 1 1/2" X 8 TPI. Threads are in nice condition. All as shown. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Machinist Lathe Tool: Atlas 9",10",12" Change Gears, Thread Dial, 1934 Manual
Up for auction is a lot of Atlas Lathe Parts that came with a 1934 9" Atlas Lathe. All in usable condition, dirty/tarnished from age/use, as follows: Change Gears: I believe these will also fit a 10" and 12" lathe. But please be sure before you bid. All the gears look to have never been used. They're just a little dirty/tarnished from age, they all have a 3/4" thru hole, a double 3/16" wide keyway, they are all 3/8" thick. Sizes are 2@ 64, 56, 54, 52, 2@ 48, 44, 40, 36, 2@ 32, 24 6" Faceplate#9-15: 1-1/2"8 TPI Drill Plate#9-361: 2MT Thread Dial#9-63: measures approx 1-3/4" between center of bolt and center of gear. Dirty/tarnished 1934 Manual: in good shape. The 2 staples that hold it all together have deteriorated Also includes misc wrenches seen in pics Please view all pics. As they are part ... moreof the description. Please see our other listings
|
|
|
Machinist Lathe Tool: Atlas 6" 4-Jaw Chuck, 1-1/2"-8 TPI
Up for auction is a Atlas 6" 4-Jaw Chuck. 1-1/2"8 TPI. That came off a 1934 Atlas lathe. This chuck looks to have been lightly used(considering its age) a little dirty/tarnished from age/use. The tops of the jaws have very minor rust. You can still see the bluing on the sides. I removed all the jaws and screws to check the threads and they all are in very good condition. All the jaws move smoothly. The 1-1/2"8 TPI has a little minor rust(seen in pics) should easily clean up. Includes original Allen Wrench Key Please view all pics as they are part of the description. Please see my other listings
|
|
|
EXCELLENT ORIGINAL ATLAS CRAFTSMAN 6" LATHE 48 TOOTH CHANGE GEAR M6-48
thanks for looking
|
|
|
VERY NICE ORIGINAL ATLAS 10" METAL LATHE CHANGE GEAR CASE INNER GUARD PART 9-152
Very Nice- Original inner guard for a 10" Atlas lathe. Part number 9-152. All in very fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
JACOBS Drill CHUCK 7B & 30B for Atlas Craftsman South Bend Logan lathe tailstock
Nice pair of Jacobs drill chucks in good working order used for accurate drilling ans countersinking. That came from an Atlas 618. These are center rest/ tailstock chucks. The 7b is nice and smooth and works flawlessly but I do not have the key for it. It is marked k44 7B cap. 0-1/4 Thd 3/8-24. The 30B is a little stiff when spun by hand but opens and closes completely fine with use of the key. It is marked Cap 0-5/16 THD 3/8-24 Great chucks and very useful especially when used with a tailstock turret.
|
|
|
ORIGINAL ATLAS CRAFTSMAN 10" 12" METAL LATHE TAILSTOCK OIL DROPPER DAUBER
ORIGINAL ATLAS CRAFTSMAN 10" 12" METAL LATHE TAILSTOCK OIL DROPPER DAUBER. Great condition. I prefer to ship out by U S post office, you need to pay the total for the item& shipping, I will accept Pay-pal or U S postal $ ORDER then I will ship it out in a few days, I will combine orders to save on shipping cost. If you need more pictures or have any questions send me a E-mail or call 954-554-3144. Thank you! CHECK OUT MY OTHER LISTINGS*
|
|
|
ORIGINAL ATLAS CRAFTSMAN 10 12 " METAL LATHE CHANGE GEAR 32 TOOTH NO. 9-101-32A
ATLAS 10/12 In. LATHE PART No. 9-101-32A 32 TOOTH GEAR The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
ATLAS CRAFTSMAN 6 INCH MK2 LATHE SPINDLE DIRECT DRIVE COUPLING 141-130 EXC.
1 direct drive coupling in excellent condition. Thanks for looking.
|
|
|
ATLAS 6" METAL LATHE TUMBLER BRACKET & GEAR ASSEMBLY MK2
Tumbler assembly in very nice condition as shown in the photos. Thanks for looking.
|
|
|
LOT OF 12 REAMERS for Atlas Craftsman South Bend Logan lathe Bridgeport
This listing is for a used lot of 12 reamers. They are 35/64-11/16" There are straight flute and twist. Some have tapered shanks. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
LOT OF 10 LARGE REAMERS for Atlas Craftsman South Bend Logan lathe Bridgeport
This listing is for a used lot of 10 large reamers. They are 3/4" 1 1/2" There are straight flute and twist. A couple have a chip out of the blades. Some have tapered shanks. I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
Atlas 6" MK2 Lathe Back Gear, Shaft, Handle Assembly MKII 10100 3216
Nice back gear assembly with some wear on the inner gear as seen in the photos. Other than that is turns nice and smooth. Better than most you will find. Thanks for looking.
|
|
|
Atlas Craftsman 6" Model 618 Metal Lathe Bed, Machinist
Up for your consideration is this Atlas Craftsman 6" Lathe Bed. Model 618. The lathe bed measures 30" overall length of the rails. The bed number is L-9-1. The supports on the ends are number M6-150L. The bed is in very nice condition. No rust on the lathe bed surface and its smooth except for on small spot where something had dropped on it. Its a minor ding and should,nt have affect on parts movement. I tried to show it in the picture. Other than that a very light dusting of rust underneath. Mostly clean all around. If you are in need of a good lathe bed, this would be one you won,t be disappointed in. Shipping will be calculated to buyers location. UPS Ground. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VERY NICE ORIGINAL ATLAS 10" LATHE QUICK CHANGE GEAR BOX GEARS TOWER ASSEMBLY
Very Nice Original Atlas 10" Lathe Quick Change Gear Box Gear Tower Assembly. Gears are all in nice condition. All as shown. I have added insurance to the cost of shipping. For shipments in the US and Canada a $3.30 rate has been added. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Master CRAFTSMAN ATLAS 12" 12-inch Wood Lathe Parts -Mounting Base Hardware
This fits a 2-3/4 in. gap. I will be away Feb. 9-16 so please pay for your item right away to avoid a week's delay in shipping. Items are shipped next business day with the USPS or FedEx Ground* SmartPost items are picked up by FedEx and delivered by the post office) Insurance is included on all purchases. I will combine and reduce shipping costs for multiple purchases. Please ask for an invoice as this is not automated. I like to stand behind everything I sell, so let me know if you have any problems or questions about your purchase. Any item I sell can be picked up in Morgantown, PA 19543. With the exception of some items paid for Sat/Sun) Check out my! Be sure to add me to your!
|
|
|
Atlas/Craftsman 12-in Original Lathe Attachment - MT2 Bull Nose Pipe Live Center
This came with an older Craftsman 12-in. lathe. I will be away Feb. 9-16 so please pay for your item right away to avoid a week's delay in shipping. Items are shipped next business day with the USPS or FedEx Ground* SmartPost items are picked up by FedEx and delivered by the post office) Insurance is included on all purchases. I will combine and reduce shipping costs for multiple purchases. Please ask for an invoice as this is not automated. I like to stand behind everything I sell, so let me know if you have any problems or questions about your purchase. Any item I sell can be picked up in Morgantown, PA 19543. With the exception of some items paid for Sat/Sun) Check out my! Be sure to add me to your!
|
|
|
Atlas 10 Craftsman 12 Lathe Dual Countershaft Pulley 560-060 Needs Work
Atlas 10 Craftsman 12 Lathe Dual Countershaft Pulley 560-060 Needs Work. Fits loose on 3/4" shaft. 7 1/2' and 9 1/16 pulley sizes. 3/4" bore with no keyway. Thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14475e6f408-0x106-
|
|
|
VERY NICE ATLAS CRAFTSMAN 6" LATHE APRON SPLIT HALF NUTS & GUIDE M6-13A 10100
Used with very little wear as you can see in the pictures. Thanks for looking.
|
|
|
Craftsman Model 109 6" Metal Lathe Change Gear Bushing Atlas
Craftsman Model 109 6" Metal Lathe Change Gear Bushing Atlas The bushing is in fine condition with some wear. It is off of a Craftsman Sears Model 109 6" Metal Lathe. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $3. 0 0 for USPS 1st Class Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
|
|
|
Craftsman Sears 109.20630 6" Metal Lathe End Gear Cover w/ Threading Chart Atlas
Craftsman Sears 109.20630 6" Metal Lathe End Gear Cover w/ Threading Chart Atlas The back cover is in fine condition with some wear. Comes with screws. The threading chart is in fine condition with some wear. It is off of a Craftsman Sears Model 109.20630 6" Metal Lathe. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $12. 0 0 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
|
|
|
EXCELLENT CRAFTSMAN 12 LATHE & ATLAS 7 7B SHAPER GUARD BRACKET HINGE PART L6-723
Excellent Condition- Original guard hinge bracket for an Atlas 7" Metal Shaper. This is also the correct guard hinge bracket for Craftsman 12" lathes. Models 101.07403, 101.27430 and 101.27440. P art number L6-723. Retains original paint. Unit is solid with no damage. In excellent condition. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NICE ORIGINAL ATLAS 10" LATHE BABBIT BEARING HEADSTOCK COMPLETE
NICE BABBIT BEARING HEADSTOCK FOR AN ATLAS 10" METAL LATHE. HAS ORIGINAL ATLAS BADGE ON CAST. I DID NOTICE A COUPLE OF LIGHT MARKS ON THE BULL GEAR TEETH. BUT ALL OTHER GEARS ARE IN VERY NICE CONDITION. OILER CAPS FUNCTION AS THEY SHOULD. THIS IS A NICE ORIGINAL BABBIT BEARING HEADSTOCK. I have added insurance to the cost of shipping. For shipments in the US and Canada a $3.30 rate has been added. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ATLAS CRAFTSMAN 6" 618 101 METAL LATHE GEAR GUARD DOOR AND HINGE
Nice Original Atlas Craftsman 6" 618 101 lathe Gear Guard Door and Hinge. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ATLAS 12" 3982 CRAFTSMAN 12" 101.27580 101.27590 LATHE LEAD SCREW GUARD 122-045
Very Nice- Original lead screw support guard for a Model 3982 Atlas 12" lathe or Craftsman Commercial 12" lathe. Models 101.27580 and 101.27590. Retains original paint and mounting hardware shown. Stamped with part number 122-045. In fine order, all as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-1447d2257b6-0x10c-
|
|
|
NICE ATLAS CRAFTSMAN 12" COMMERCIAL LATHE COMPOUND REST CHIP GUARD 122-046
NICE ORIGINAL COMPOUND REST CHIP GUARD FOR AN ATLAS CRAFTSMAN 12" COMMERCIAL LATHE. STAMPED WITH PART NUMBER 122-046. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NICE ORIGINAL ATLAS 10" CRAFTSMAN 12" LATHE TIMKEN BEARING HEADSTOCK SPINDLE
Nice original headstock spindle for a 10" Atlas or 12" Craftsman lathe. 1 1/2 X 8 Thread Mount. Includes bearings. Collar, racers and woodruff keys. The collar for the very end is missing. I have added insurance to the cost of shipping. For shipments in the US and Canada a $3.30 rate has been added. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT ATLAS CRAFTSMAN 6" 618 LATHE COMPOUND REST TOP GIB & SCREWS M6-304
Excellent Condition- Original compound rest top gib and set screw assembly for a 6" Atlas 618 or Craftsman 101 lathe. Gib is 4 9/16" long. Face is 1/4" wide, 1/8" thick. Gib is part number M6-304. Listing includes gib lock nuts and set screws. Gib lock nuts are part number M6-223. All in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VERY NICE MT2 SPUR CENTER FOR ATLAS CRAFTSMAN SOUTH BNED LATHE
Very Nice Spur Center for an Atlas. Craftsman or South Bend Lathe. Total length of unit is 4" long. Tip is in very nice condition. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
001 Clausing Lathe Milling Vise Attachment #7525 Atlas 12" Mk3 4800
Clausing model no. 7525 milling vise in very good condition. Ways are clean. Motion is tight, and functions as it should. Some minor milling marks on the vise, as pictured. The nut and screw appear to have about 10-15 thousands of hysteresis. Base is just under 4" OD(about 3 15/16" I obtained this with a Clausing 12" MK3a lathe but it looks like it will fit many others. Comes with cheap wrench shown(fits the angle adjustment nuts) and what appear to be the original factory V-blocks. Handle will be removed for shipping. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote!
|
|
|
Craftsman 12" Commercial Lathe Headstock Spindle & Dust Shields 1.5"X8TPI Atlas
Craftsman 12" Commercial Lathe Headstock Spindle& Dust Shields 1.5" X 8 TPI This listing is for a Craftsman 12" Commercial Lathe Headstock Spindle& Dust Shields with 1.5" X 8 TPI. It is in nice condition as can be seen in the photos with the dust covers. This came with some other parts. So I am not selling it with bearings, but priced it so you can add new bearings. The bearing races are present and will ship, but the cones are not there. There are two little nicks that have been buffed off that won't affect it, and I tried to show them in the last photo. Check my other listings under"Lathe Parts" I am happy to combine shipping to save you money-just let me invoice you before you pay. $8.95 Flat Rate Priority Shipping anywhere in the USA. Sellers note: Feel free to ask questions during the auction ... moreif you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. Feedback: Since some buyers are not interested in feedback. I choose not to burden them down with more of it, but I leave feedback as soon as the buyer does! a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-144804a7853-0xea-
|
|
|
Lathe GearCover/Guard + Knob Assy for Atlas Mark 2 Model 10100
This guard is intact but has 2 cracks each about 3" long. There is a splint holding the cover together and when I flex it it seems secure. Please do not but this item unless you are prepared to use it as is or add a patch of your own. I am selling it as parts so there is no mistake about the condition. Please bid accordingly. I have listed this item in case it is of value to someone. I have stated the condition as accurately as possible. Thanks for looking. A;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1448084a3b2-0x10c-
|
|
|
ATLAS CRAFTSMAN 6" METAL LATHE HEADSTOCK SPINDLE 383-020 1"-10 10100
This is the complete headstock off of an Artlas 10100 6" lathe. The bearings are nice and tight. There is some minor scarring on the end of the shaft but it should not cause any issues. The pulleys came off nice and clean and are in another of my auctions if you wish to take a look. Other that that it is a shown in the pictures. Thanks for looking.
|
|
|
LOT OF 4 MIXED DRILLS for Atlas Craftsman South Bend Logan lathe
This listing is for a used lot of 4 drill bits. They are 11/16(2MT) 3/4(straight shank) 13/16(2MT) 7/8"3MT) I accept POSTAL MONEY ORDERS as well as PayPal. If the item is picked up. Cash is the only accepted form of payment. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
|
|
|
Atlas 10" Metal Lathe Apron Handwheel Shaft & 12 Tooth Gear Craftsman
Atlas 10" Metal Lathe Apron Handwheel Shaft& 12 Tooth Gear Craftsman The handwheel shaft and gear are in fine condition with some wear. Comes with woodruff key and nut. It is from a Atlas 10" Metal Lathe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 4.0 0 for USPS 1st Class Mail Shipping with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1448592e455-0xf4-
|
|
|
Atlas Craftsman Metal Lathe 10-12 4 Jaw 8" Chuck 1-1/2 8TPI 111.21410
Atlas/ Craftsman 8" 4 Jaw Chuck Model 111.21410 with 1-1/2 8TPI backplate. Has pitting on the jaws a a little on the side- Please see photos for details. They would definitely benefit from being ground in place on your lathe to assure best accuracy. Operates smoothly Fits Atlas. Craftsman, South Bend, Logan and other lathes with 1-1/2 8 TPI spindles. Please see my other listings for more machinist's parts. Tools and accessories. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Atlas 10" Metal Lathe Change Gear Bracket Banjo Part # 10-25 Craftsman
Atlas 10" Metal Lathe Change Gear Bracket Banjo Part#10-25 Craftsman The banjo is in fine condition with some wear. Part#10-25. It is from a Atlas 10" Metal Lathe. See pictures. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 12.0 0 for USPS Priority Mail Shipping with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
|
|
|
MACHINIST ARBOR 3/8" STRAIGHT SHANK ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE
MACHINIST ARBOR 3/8" STRAIGHT SHANK ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE Brand Unknown Packaging None Condition Excellent Quantity 1 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
Atlas Catalog L-47 Quick Change 10" Lathe 1949 Very Good Condition WOW
All their Lathes an Accessories. Kalamazoo Michigan Very Rare, Very Good Condition, Sharp
|
|
|
ATLAS 10" LATHE ORIGINAL CHIP PAN 45 1/4" x 18 1/8"
ATLAS 10" LATHE ORIGINAL CHIP PAN 45 1/4" x 18 1/8" Brand Atlas Packaging None Condition Very Good Quantity 1 I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
FRANKLIN 1/3 HP 1725 RPM 1 PH MOTOR LATHE LOGAN ATLAS CRAFTSMAN SOUTH BEND ETC.
FRANKLIN 1/3 HP 1725 RPM 1 PH MOTOR LATHE LOGAN ATLAS CRAFTSMAN SOUTH BEND ETC. Brand Franklin Packaging None Condition See Description Quantity 1 5/8" Shaft. Cord has been cut. I tested the motor before removal. It runs strong but its noisey. I think its the fan or brushes but thats just a guess. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist ... moreand woodworker. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1448592e455-0x104-
|
|
|
ORIGINAL USED ATLAS CRAFTSMAN 9-12 LATHE #348 TAILSTOCK LIVE CENTER #2 MT SHANK
ORIGINAL USED ATLAS CRAFTSMAN 9-12 LATHE#348 TAILSTOCK LIVE CENTER#2 MT SHANK Click to Enlarge ORIGINAL AND FINE USED ATLAS CRAFTSMAN 9-12 INCH LATHE#348 TAILSTOCK LIVE CENTER WITH#2 MT SHANK. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
ORIGINAL ATLAS CRAFTSMAN 9-12 INCH LATHE 9-136/137A ROCKER TOOL POST ANCHOR+SCR
ORIGINAL ATLAS CRAFTSMAN 9-12 INCH LATHE 9-136/137A ROCKER TOOL POST ANCHOR+SCR Click to Enlarge ATLAS CRAFTSMAN 9-12 INCH LATHE ROCKER TOOL POST TEE NUT ANCHOR AND STUD 9-136A AND 9-137A. FINE USED. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
Jacbos 56b Headstock Chuck 1” X 10tpi Mount 618 Atlas Craftsman 6" Metal Lathe
Up for your consideration is a Jacobs 56B Headstock Chuck. With a 1” X 10 tpi mounting thread and a 0-17/32” capacity. Typically used on the 6” Atlas Craftsman metal lathes or anything else that has a 1” X 10 tpi mount. This chuck is in like new condition. If it has been used I can’t tell. The only thing I see to mention is the original box is showing age with scuffing and soiling and has tape on the lid. The brown colored areas you see on the chuck is not rust, it’s grease. To be sold as chuck with key and original box. And the pictures are of the actual items being sold. I ship out daily(except Sunday& Holidays) and process items within 24 hrs of payment. California residences will need to pay 8.5% sales tax or provide a valid resale license. Payment must be made within 4 days.
|
|
|
The D Whiton machine Co four inch three jaw lathe chuck atlas craftsman
I DO NOT SHIP WORLD WIDE USA ONLY THIS MEANS TO THE USA ONLY! LOWER 48 STATES ONLY! IF YOU HAVE A US SHIPPING ADDRESS OR BROKER I WILL SHIP TO THAT ADDRESS. The D Whiton machine Co four inch three jaw lathe chuck set up with a backing plate for a small atlas or craftsman lathe. No chuck key jaws move independent of each other. as/is. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-144868e9d4e-0xfb-
|
|
|
NICE ORIGINAL ATLAS CRAFTSMAN 10 12 LATHE SADDLE GIB SCREWS AND NUTS
Nice Original Saddle Gib Screws and Nuts for an Atlas Craftsman 10" 12" Metal Lathe. Screws and Bolts are in nice condition as well as screw slots. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
4 Jaw Lathe Chuck Craftsman Atlas Logan Part #101-21550 Fine Thread Spindle
4 Jaw Lathe Chuck Craftsman Atlas Logan- Fine Thread Spindle. An estate sale find! A nice original Sears Craftsman or Atlas 4 inch diameter. 4 jaw lathe chuck- fine thread spindle. Part# 101-21550- also has this number on it C84539 Will fit the Atlas or other brands of equipment Includes the correct chuck key Threads are 1 inch- 20 TPI Through hole is 4/3 inch diameter. My Service Commitment: Great packing. Speedy shipping and quick communication plus reasonable shipping and handling. Please check out my other items and add me to your favorites list! Thanks! 4 Jaw Lathe Chuck Craftsman Atlas Logan- Fine Thread Spindle Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ATLAS/CRAFTSMAN 12" lathe operation,Threading,instruction parts manuals
Lathe operation. Threading supplement and instruction parts manuals.thanks for looking.
|
|
|
Atlas / Craftsman 10" 12" Metal Lathe Carriage Traverse Gear Assembly.
Atlas/ Craftsman 10" 12" Metal Lathe Carriage Traverse Gear Assembly. Good condition. No cracks or chipped teeth. Bolts included(not pictured) Please see my other listings for more lathe parts and machinists tools. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Atlas / Craftsman 10" 12" Metal Lathe Carriage Mitre Gear.
Mitre Gear for Atlas/ Craftsman 10" 12" Metal Lathes Nice condition. No breaks or chipped teeth. Operates smoothly. Please see my other listings for more lathe parts and machinists tools. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
4 inch, 3 Jaw, Atlas 618 ,Craftsman 6 in Lathe chuck 1x10 Thread
4 Inch 3 jaw self centering lathe chuck for Atlas 618 and Craftsman 6 inch metal lathes 1 inch by 10 thread Made by Union Tool Co of New Britain Conn USA This chuck does not use a key rather the body of the chuck turns to adjust it
|
|
|
Atlas Craftsman 12 inch Lathe Leg L-6-150R L-6-150L Legs Feet 10
Shipping to USA only please. May also fit other models. 10 inch. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ATLAS LOGAN SOUTH BEND 9 10 12 LATHE LANTERN STYLE ROCKER TOOL POST HOLDER PARTS
HERE'S A ATLAS CRAFTSMAN LOGAN SOUTH BEND 9" 10" 12" METAL LATHE LANTERN STYLE ROCKER TOOL POST HOLDER FOR PARTS. DIMENSIONS ARE: TOOL POST BASE: 1.537 X 1.25 X.189 TOOL POST BODY DIAMETER: 750 HEIGHT TO SHOULDER( TOP OF SLOT) 2 1/2 SLOT WIDTH: 408 SLOT LENGHT: 1.821 PLEASE LOOK AT THE PICTURES AS THEY ARE PART OF THE DESCRIPTION ALSO. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1448c580f34-0xec-
|
|
|
Atlas 618 Craftsman 101 lathe Change Gears set 31-64
Up for your bids is a gear set with numbers 31 38 40 44 46 52 54 64 Any questions please ask Posted with
|
|
|
Reemer 3/4" metal lathe tooling machining Southbend Atlas Craftsman Bridgeport
Reemer(might be considered a endmill) 3/4"dia with a 1/2" shaft. Came with a bunch of South Bend stuff I bought. Been sitting in my garage for a while still works. Needs to be rubbed down with oil. Also have other machining items on ebay now. Shipping price is waved if picked up in person. I start many of my auctoins at.99 cents. All of my items are sold as is no returns. I sell in the United States only. Shipped US postal on fridays only. I do ebay only in the winter. I am always looking for West Boylston Mass. milk bottles. Good luck and thank you for looking. for my referance 4A)
|
|
|
Vintage Atlas Craftsman ROTO RECORD Metal Lathe 3 Jaw Chuck 3 1/2" 1"x 8 TPI
Vintage Atlas Craftsman ROTO RECORD Metal Lathe 3 Jaw Chuck 3 1/2" 1"x 8 TPI Threads. Seems to be in great shape. It came with a old Craftsman 101 6" x 18 metal lathe. I prefer to ship out by U S post office, you need to pay the total for the item& shipping, I will accept Pay-pal or U S postal $ ORDER then I will ship it out in a few days, I will combine orders to save on shipping cost. If you need more pictures or have any questions send me a E-mail or call 954-554-3144. Thank you! CHECK OUT MY OTHER LISTINGS*
|
|
|
ATLAS LATHE LEVERACTION COLLET CLOSER SOUTH BEND CRAFTSMAN LOGAN
LEVER ACTION COLLET CLOSER IS A GREAT PRODUCTION DEVICE FOR 3AT COLLETS FOR 10 IN. OR 12 LATHES YOU CAN KEEP THE LATHE RUNING AND FEED STOCK WITH OUT SHUTING DOWN THE LATHE
|
|
|
"V" BLOCK ATLAS SOUTH BEND CRAFTSMAN LATHE MILLING STARRETT B & S GENERAL
V" BLOCK IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE ... moreGIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-144909fb2af-0x103-
|
|
|
LIVE CENTER MADE BY JC GLENZER CO.MT 2 SOUTH BEND ATLAS LOGAN CRAFTSMAN LATHE
LIVE CENTER MADE BY JC GLENZER CO.MT 2 THIS IS A WELL MANUFACTURED LIVE CENTER. THE TOP CAN BE TAKEN OFF TO ACCESS THE BEARING AND THE BASE OF THE TIP. SEE PICTURES. THIS IS A HEAVY DUTY CENTER. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive ... morepurchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
ATLAS LATHE 6 PC TURNING CUT-OFF KNURLING THREADING HOLDER & ARMSTRONG No.T2-S
ORIGINAL ATLAS 6 PC TOOL HOLDER SET AND ARMSTRONG No 2 T2-S STRAIGHT TOOL HOLDER ATLAS STRAIGHT HOLDER LH TOOL HOLDER RH TOOL HOLDER KNURLING TOOL CUT OFF TOOL THREADING TOOL BLADE. TOOL BITS, WRENCHES AND EXTRAS. NEED SOME CLEANING AS DESIRED. USABLE CONDITION WITH MINOR SURFACE RUST& DISCOLOR(see pics) Please take a look at all pictures. What you see in the pictures is what you will receive. I am not a expert in the metalworking/milling/machining industry. But we do my best to describe the item I'm selling and the condition that it's in. Parts are listed with part numbers when available- please do your research before bidding. CHECK MY OTHER LISTING FOR MORE TOOLS AND MACHINIST PARTS! Thank You.
|
|
|
MT 2 DEAD CENTER ATLAS CRAFTSMAN LOGAN SOUTH BEND CLAUSING LATHE
MT 2 DEAD CENTER IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE ... moreGIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14492714d05-0xe5-
|
|
|
atlas 10 lathe apron carriage & HALF nuts,compound ,handle
atlas 10" lathe apron.Half nut, looks good getting rid of all my atlas stuff,no returns so be sure this is what you need,
|
|
|
ATLAS CRAFTSMAN 10" 12" LATHE COMPOUND GEAR 16/32
ATLAS CRAFTSMAN 10" 12" LATHE COMPOUND GEAR 16/32 NO CHIPPED OR BROKEN TEETH IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE ... moreSHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
10" 12" ATLAS CRAFTSMAN LATHE CROSS FEED GEAR KNOB PART 441-060
10 12 ATLAS CRAFTSMAN LATHE CROSS FEED GEAR KNOB PART 441-060 THIS IS FOR THE KNOB FOR THE CROSS FEED GEAR. NO CRACKS OR BREAKS IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK ... moreAND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
ATLAS 6" DOG DRIVE FACEPLATE # 9-15 CRAFTSMAN SOUTH BEND LOGAN CLAUSING LATHE
ATLAS 6" DOG DRIVE FACEPLATE# 9-15 1 1/2" X 8 TPI IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF ... moreYOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
MT2 JACOBS TAILSTOCK DRILL CHUCK 4 AN ATLAS CRAFTSMAN SOUTH BEND LATHE 0-1/2"
Original Jacobs MT2 Tailstock Drill Chuck for an Atlas. Craftsman, or South Bend Metal Lathe. 0-1/2" capacity. Chuck is marked with"JACOBS CHUCK HARTFORD CONN. UNITED STATES OF AMERICA, 6A 33 TAPER CAP. 0- 1/2" and Arbor is marked"PART No A0233 JACOBS CHUCK ARBOR No 2 MORSE TAPER WITH No 33 JACOBS TAPER" Includes Key. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Atlas Craftsman 10" 12" Lathe Back Gear 10-243
I have too many spare parts for my Craftsman 12" lathe so I am selling off many of my best parts! Atlas/Craftsman 10" and 12" Lathe Back Gear 10-243 Used. But in excellent condition and clean! Fits all 10" and 12" Atlas/Craftsman lathes. Including the Craftsman Commercial. This is the large back gear that goes on the back gear shaft behind the spindle, or in the case of the Craftsman Commercial beneath the spindle. Returns accepted within 14 days. Buyer pays return shipping. Please ask any questions before bidding!
|
|
|
Vtg Lathe Cut off Block Holder Tools 1/2" - from 6" Atlas
OLDE TYME STORE_ We acquire an estate home shop of wood working and machining tools. the previous owner was over 100 years old and a bit of a pack rat. hundreds of boxes. the tools range in age from antique to newer. many items to be listed over the next couple weeks. As we go through our trailer load. This auction is for: A vintage lathe attach ment part. cut off block- tools. unmarked- no box. perhaps by Clausing Corp. Like the other items we are auctioning from this 6" Atlas. condition as can be seen in photos. I am not familiar with these items. the tools do slide in nicely/firmly and set with the Allen We are glad to combine multiple purchases and save shipping costs when possible. T h anks! please. View our other auctions. Payment: Paypal is our accepted method of payment. Buy It Now items require immediate payment. Auction items ... morerequire payment within 7 days close of auction. if payment has not been made within 7 days. we reserve the right resell the item(s) Shipping: $7.00 shipping. Shipping Time: Items are generally shipped within 48 hours- most often with 24 hours close of auction. E-mails. Etc: We are happy to try to answer emails.please. Do not wait till the last hours of an auction to ask questions. In fairness to all bidders.we do not end our auctions early. OLDE TYME STORE We are a family run business in Sarasota County. Florida.most our items come from estates we purchase and private collections.
|
|
|
LATHE 4 STEP PULLEY DELTA ROCKWELL ATLAS WALKER TURNER CRAFTSMAN ETC
LATHE 4 STEP PULLEY DELTA ROCKWELL ATLAS WALKER TURNER CRAFTSMAN ETC Brand Congress Packaging None Condition Excellent Quantity 1 2 1/2" tall. 5/8" bore. 2" 3" 4" 5" steps. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
Williams No. 2R Lathe Tool Holder For South Bend, Logan, Atlas, Sheldon
This is a used. But excellent condition, Williams 2R right-hand turning lathe tool holder. This genuine Made-In-USA tool will outlast any of us users! Please put it to work today!
|
|
|
Craftsman Sears Model 109 6" Metal Lathe 54 Tooth Change Gear 109.20630 Atlas
Craftsman Sears Model 109 6" Metal Lathe 54 Tooth Change Gear 109.20630 Atlas The gear teeth are in fine condition with some wear. It is off of a Craftsman Sears Model 109.20630 6" Metal Lathe. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $4. 0 0 for USPS 1st Class Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
|
|
|
LATHE LANTERN STYLE TOOL POST HOLDER + HOLDERS fits CRAFTSMAN ATLAS SOUTH BEND
Lantern Type Tool Post with Tool Holders. T-nut 1 1/8"x 1.4" x 3/16" thick. Accept Tool holders of 3/8"wide x 1" high. Tool Holders: Williams Boring Holder#00B CAP 3/16" to 1/2" Williams Cutting-off#2020L Blade size 3/32"x 5/8" Craftsman Turning Holder#2194L Cap 1/4" Craftsman Turning Holder#2192R Cap 1/4" Atlas Straight Turning Holder Cap 1/4" Check out my! 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14496b7520a-0x110-
|
|
|
NICE ORIGINAL ATLAS CRAFTSMAN 10 LATHE COUNTERSHAFT BALL, HANDLE, FULCRUM & LINK
NICE ORIGINAL BALL. HANDLE, LINK AND FULCRUM FOR THE COUNTERSHAFT TO AN ATLAS CRAFTSMAN 10" METAL LATHE. PART NUMBERS ARE AS FOLLOWS BALL 51-56, HANDLE 51-52, FULCRUM 10-78, AND LINK 57-79. INCLUDES 1 WASHER AND 2 HEX CAP SCREWS. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EXCELLENT LOT OF 7 MICRO 100 CUTTING TOOL BITS ATLAS CRAFTSMAN SOUTH BEND LATHE
Excellent Original Lot of 7 Micro 100 Cutting Tool Bits for an Atlas. Craftsman or South Bend Lathe. Cutting Tool Bits are 3/8" in diameter. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ATLAS 12" COMMERCIAL LATHE HAND LEVER COLLET CLOSER ASSEMBLY 10-901A
RARE ATLAS HAND LEVER COLLET CLOSER FITS AN ATLAS 12" COMMERCIAL LATHE. MAY ALSO FIT THE 10"12" WITH SOME ADJUSTMENTS. THERE ARE SOME PARTS ON THE BRACKET SECTION OF THIS UNIT THAT MAY NOT BE ORIGINAL AND MAY NEED TO BE MODIFIED SLIGHTLY TO BE A PERFECT FIT. UNIT WILL ACCEPT 3AT COLLET'S. THE BRACKET ON THE VERY END WAS MOUNTED TO THE BACK OF THE HEADSTOCK WITH THE TWO BOLTS. ALSO IT LOOKS TO HAVE BEEN SLIGHTLY REPAIRED ON THE ARM HANDLE SECTION AS WELL AS THE KNURRLED KNOB. OVERALL THIS IS IN NICE CONDITION AND IS A VERY RARE PIECE. I WILL BE TAKEN OUT THE COLLET BAR FOR THE SAFEST SHIPPING. I have added insurance to the cost of shipping. For shipments in the US and Canada a $3.30 rate has been added. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice ... morewith correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VINTAGE STARRETT HIGH SPEED INDICATOR EXCELLENT CONDITION ATLAS SOUTH BEND LATHE
VINTAGE STARRETT HIGH SPEED INDICATOR EXCELLENT CONDITION IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU ... morePURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
|
|
|
ATLAS METAL LATHE KNURLING TOO MACHINIST TOOLING KALAMAZOO, U.S.A.
NEVER USE STOCK PICTURES! Shipping Information Usually will ship within the next day after receipt of payment. Saturday shipping when possible. Will provide insurance for items valued over $20.00! Always glad to combine shipping International buyers please check customs charges. They are not included in shipping cost! International buyers please check shipping cost before bidding! First class can take up to 8 weeks to deliver. Only Canada can first class be tracked Payment Information We gladly accept PayPal Payment must be made within 3 business days Texas residents need to add 8.25% sales tax. PLEASE SEE PICTURES FOR DETAILS. IF IT IS NOT IN THE PICTURE, IT IS NOT INCLUDED! You are bidding on an ORIGINAL ATLAS KNURLING TOOL KALAMAZOO. U.S.A. METAL LATHE KNURLING TOOL MACHINIST TOOLING CONDITION; USED BUT IN EXCELLENT CONDITION NO MARKINGS ... moreROLLERS ARE SMOOTH WITH NO WOBBLE. SEE PICTURES FOR DETAILS. P lease check out my! Be sure to add me to your! Always glad to combine shipping. ADDITIONAL NOTE TO BUYERS REGARDING FEEDBACK STARS. I STRIVE FOR 5-STAR SERVICE BY STATING UPFRONT MY POLICIES AND MY SHIPPING RATE. ALSO. I DESCRIBE TO THE BEST OF MY ABILITY. IF YOU WERE PLEASED WITH THIS TRANSACTION. PLEASE RESPOND WITH ALL 5 STARS! IF YOU ARE NOT PLEASED, LET ME KNOW, AND I'LL WORK TO MAKE IT THAT WAY. Questions are welcomed. Thank you for looking! ShipSaver.
|
|
|
Atlas 618 6" tailstock assembly Craftsman mini lathe
Offered to the highest bidder is a very nice complete tailstock assembly less the quill lockdown mechanism. Otherwise complete and in nice condition. This was gently used. What you see is what you will get. Any questions. Please contact me. Thank you for looking and good luck. Bob
|
|
|
FINE USED ATLAS CRAFTSMAN 101 618 6 INCH LATHE COMPLETE M6-58 TUMBLER ASSY
FINE USED ATLAS CRAFTSMAN 101 618 6 INCH LATHE COMPLETE M6-58 TUMBLER ASSY Click to Enlarge EXCELLENT USED ATLAS M6-58 TUMBLER ASSY FITS 101 AND 618 6 INCH SWING LATHES. GREAT SHAPE. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
Atlas # L3-20 Countershaft Bracket 12" Lathe / MH 57
Hello Folks. Today we have an Atlas Countershaft Bracket, Atlas Part# L3-20. It is in good used condition, with no damages. P lease check our Ebay store for other great collectibles. Trains, and tools, and as always don't hesitate to email us with any questions you may have regarding our items. We appreciate you. And thank you for shopping with us today, and as please know we take great care in wrapping your treasures so they arrive to you safely and promplty. We do appreciate your prompt payment, and take PayPal for your convenience. If payment cannot be made within 3 days please contact us to let us know, so we can make other arrangements such as a US Postal MO. We do turn over all unpaid items to Ebay for collection, and for credit on all of our Ebay fees.
|
|
|
METAL LATHE FACEPLATE 1 1/2-8 MOUNT MACHINIST TOOLING SOUTH BEND ATLAS LOGAN
DESCRIPTION: USED. 5 1/8" DIAMETER X 1 1/2-8 METAL LATHE FACEPLATE. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MA
|
|
|
Atlas # L4-5 Tailstock Casting - 12" Lathe Includes Base / MH 54
Hello Folks. Today we have an Atlas# L4-5 Tailstock Casting with centering base unit. Good used condition, with no damages. P lease check our Ebay store for other great collectibles. Trains, and tools, and as always don't hesitate to email us with any questions you may have regarding our items. We appreciate you. And thank you for shopping with us today, and as please know we take great care in wrapping your treasures so they arrive to you safely and promplty. We do appreciate your prompt payment, and take PayPal for your convenience. If payment cannot be made within 3 days please contact us to let us know, so we can make other arrangements such as a US Postal MO. We do turn over all unpaid items to Ebay for collection, and for credit on all of our Ebay fees.
|
|