|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: Part Name:Hydraulic Lift Cylinder Condition:Aftermarket New Dimensions: (As Shown) Part Number:6531324 6586575 7142833 Fitment: For Bobcat ... moreSkid Steer 653, 751, 753, 7753 Package Include： 1× Lift Cylinder UPC Does not apply Brand turitrade Type Hydraulic Lift Cylinder Manufacturer Part Number 6531324 6586575 7142833 Manufacturer Warranty 90 Day Condition New Compatible Equipment Make Bobcat Compatible Equipment Type Skid Steer Loader MPN 6531324 6586575 7142833 Model 653, 751, 753, 7753.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Fitment： For Bobcat E32 E32I E35 E35I Description： -New Aftermarket Replacement Hydraulic Boom Cylinder -Fits For Bobcat Construction & Industrial Models: ... moreE32, E32I, E35, E35I -Replace Part Number: 7191555 Package includes: -1* Hydraulic Boom Cylinder -W/o Product Instruction UPC Does not apply Compatible Equipment Make For Bobcat Part Type Hydraulic/Power Steering Parts Compatible Equipment Type Construction & Industrial Brand turitrade Manufacturer Warranty 90 Days MPN 7191555 Model E32 E32I E35 E35I Material Steel.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: Part Name: Hydraulic Tilt Cylinder New Aftermarket Replacement Dimensions: As Shown Part Number:7104437 6593398 6539810 6598067 Applications:For ... moreBobcat Skid Steer Loader(s) 630, 631, 632, 641, 642, 643, 645, 730, 731, 732, 741, 742, 743 Fitment: For Bobcat Skid Steer Loader(s) 630, 631, 632, 641, 642, 643, 645, 730, 731, 732, 741, 742, 743 Package Include： 1× Hydraulic Tilt Cylinder .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: Professional floor scrubber/ pallet jack charger for 24V lead acid battery system with Anderson style Red SB50 (50 Amp) connector. Features: ... moreFully automatic 3 stages charging with LED indicator lights Can be used either as onboard or portable charger For all types of lead acid batteries - Wet, AGM, GEL Advanced safety features - Over current, voltage, polarity reversed short circuit protections 10 Amp charging rate with Anderson style SB50 RED connector (12.5 ft cable) May fit on below models (please make sure your connector is RED and with '50' marked on it):.
Buy It Now
$10.85 Shipping Condition: New Location: HEBDEN BRIDGE, United Kingdom
Buy It Now
$4.00 Shipping Condition: New Location: United States SEE PICTURES TO VERIFY. NEW CONDITION AS SHOWN IN PICTURE.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States If it is necessary to fix the sprayer, as long as the place of adsorption is flat, it is steel or iron, the magnetic seat is easy to adsorb, and the adsorption ... moreposition can be easily moved. Application: Lathe, drilling machine, milling machine, grinder, tapping machine, tool grinder, CNC machine tool, weighing machine, sawing machine, woodworking machinery, feeding machine, etc.
Buy It Now
$10.60 Shipping Condition: New – Open box Location: Milroy, United States Approx 3/16" thick x 2" wide x 12ft long. roll of NEW Flat Belt.
Buy It Now
Free Shipping Condition: New Location: Suwanee, United States Model 47015. Adds 25.6 in. Material Cast Iron. Weight 22.05 lbs. Perfect accessory for longer spindle projects. Easy to add and remove.
Buy It Now
$6.05 Shipping Condition: Brand New Location: Wilton, United States Cincinnati LRT Hydrashift, Lathe, Service and Parts Manual 1962 94 pagesNew reproduction of Owner/Operator ManualGlossy protective covers front and backHeavy ... morecard stock front and back covers.Comb binding8 1/2 X 11" formatMade in the USA
Buy It Now
$6.05 Shipping Condition: Brand New Location: Wilton, United States Comb binding. New reproduction of Owner Parts Manual, to be printed in black and white. I have a large database and have only listed a fraction of thus ... morefar. Things happen. I will be happy to work with you.
Buy It Now
$6.05 Shipping Condition: Brand New Location: Wilton, United States Logan Lathe 200-210 Parts List manual. Comb binding. I have a large database and have only listed a fraction of thus far. Glossy protective cover front. ... moreNew reproduction of parts Manual, Printed in black and white.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States New Carburetor Assy For Ford tractor models 600 700 series with 134 CID Gas Engines .Carburetor For Ford Tractor OE # EAE9510C B2NN9510ACarburetor For ... moreFord Jubilee NAA NAB 600 620 630 650 660 700 740 800 850 TractorCarburetor For Marvel Schebler TSX428Carburetor For Zenith 0-13880 13880This is a NEW carburetor, not rebuilt.The mounting stud measure 2-1/4" center to center.The throttle bore throat size measures 1-1/16" diameter.The choke air horn (air inlet) measures 1-5/8" OD.The fuel inlet measures 1/8" NPT.The carb mounting gasket is included.--Replaces Marvel Schebler TSX428Please DO NOTE:EAE9510C can NOT Replace for EAE9510D TSX580, They are totally different Brand SPOST MPN EAE9510C/TSX428/ B2NN9510A Compa.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Fitment： For Bobcat Skid Steer Loader 873 883 6811612 Description： -New Aftermarket Tilt Cylinder -Compatible With For Bobcat Skid Steer Loader(S) 873, ... more883 -Replace Part Number: 6811612 Package includes: -1* Tilt Cylinder -Without Product Instruction UPC Does not apply Compatible Equipment Make For Bobcat Part Type Tilt Cylinder Compatible Equipment Type Skid Steer Loader Brand turitrade Manufacturer Warranty 90 Days MPN 6811612 Model 873, 883 Material Steel.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification： Floor scrubber/ pallet jack charger for 24V system with Anderson Style Gray 175 Model Feature： Charger Output Volt：24V Fully automatic ... moremulti stages charging with LED indicator lights. Can be used either as onboard or portable charger with a total 1.1 m cable length. For all types of lead acid batteries - Wet, AGM, GEL, Deep Cycle. Advanced safety features - Over current, voltage, polarity reversed short circuit protections Fast charging and maintaining. With easy grip handle. 15 Amp charging rate with 175 model connector Package Contents：.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification： Fully automatic 3 stages charging with LED indicator lights Can be used either as onboard or portable charger For all types of lead acid ... morebatteries - Wet, AGM, GEL Advanced safety features - Over current, voltage, polarity reversed short circuit protections 10 Amp charging rate with Anderson style SB50 RED connector (1.1m cable) Feature： Professional floor scrubber/ pallet jack charger for 24V lead acid battery system with Anderson style Red SB50 (10 Amp) connector May fit on below models (please make sure your connector is RED and with '50' marked on it): Brain Corporation ICE RS26 GEN2 Clarke (Alto) ENCORE S20.
Buy It Now
$11.99 Shipping Condition: Used Location: Phoenix, United States Beautiful Wall Art with Remote LED Light Steam Punk Classic. Light is shown in Red / Green / Blue in Pictures.
Buy It Now
$6.05 Shipping Condition: Brand New Location: Wilton, United States Cincinnati LR Hydrashift, Lathe, Service and Parts Manual 1962 94 pgsNew reproduction of Owner/Operator ManualGlossy protective covers front and backHeavy ... morecard stock front and back covers.Comb binding8 1/2 X 11" formatMade in the USAIf your looking for a hard to find manual send me the make and model number and I'll see if I have it in my Database.
Buy It Now
$6.05 Shipping Condition: Brand New Location: Wilton, United States Logan Lathe 917-922 Parts List year 1952 to 1953 19 pagesNew reproduction of parts Manual, Printed in black and whiteGlossy protective cover front Heavy ... morecard stock front and back covers.Comb binding8 1/2 X 11" format, lay flat when openMade in the USAIf you are looking for a hard to find manual or parts manual please let me know. I have a large database and have only listed a fraction of thus far.If you are unhappy with your purchased in anyway please contact before leaving feedback. I would much rather send a replacement or a refund than have an unhappy customer. Things happen. Lost in the mail is a common problem. Sometimes tracking doesn't update in the progression of the mail chain. I will be happy to work with you.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Fitment： 2 Piece Yellow Seat Cushion Set For John Deere 2030 2040 2440 2640 2350 2550 Note:The models provided are for reference only. Please check the ... moremounting dimensions carefully before purchasing. Description： -One New Aftermarket Replacement 2 Piece Seat Cushion Set -Fits For John Deere Models: 820, 830, 1010, 1020, 1030, 1120, 1520, 1530, 2020, 2030, 2040, 2120, 2150, 2155, 2250, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640 (s/n 340999 - earlier), 2750, 2755, 2855, 2955, 4000, 4020 (s/n 201000 -later), 4230, 4320 -For John Deere Combine Models: 3300, 4400, 7700 -For John Deere Hay Cuttings Models: 800, 830.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States If it is necessary to fix the sprayer, as long as the place of adsorption is flat, it is steel or iron, the magnetic seat is easy to adsorb, and the adsorption ... moreposition can be easily moved. Application: Lathe, drilling machine, milling machine, grinder, tapping machine, tool grinder, CNC machine tool, weighing machine, sawing machine, woodworking machinery, feeding machine, etc.
Buy It Now
$18.40 Shipping Condition: New – Open box Location: Milroy, United States Approx 3/16" thick x 2" wide x 25ft long. roll of NEW Flat Belt.
Buy It Now
$6.90 Shipping Condition: Brand New Location: Wilton, United States Cincinnati LR Hydrashift, Lathe, Service and Parts Manual 1962. Comb binding. I have a large database and have only listed a fraction of thus far. New ... morereproduction of Owner/Operator Manual. Things happen.
Buy It Now
$22.95 Shipping Condition: New – Open box Location: Bucyrus, United States The valves are in new, unused condition and are ready to be installed for optimal engine performance. Each valve is made of high-quality materials and ... morehas been inspected for any defects or imperfections.
Buy It Now
$3.97 Shipping Condition: Acceptable Location: Addison, United States Craftsman 12" Wood Turning Lathe 113.123800. Instruction Maintenance Owners Manual. PRINTED MANUAL.
Buy It Now
$3.97 Shipping Condition: Good Location: Addison, United States Manual Fits South Bend SB1002. Not for a COLLECTOR.
Buy It Now
$4.13 Shipping Condition: Acceptable Location: Monmouth, United States Logan Lathe Parts List for No 200-210 lathe’s. 15 pages complete. Fully illustrated. The cover is as pictured. The pages inside are in good shape.
Buy It Now
$3.97 Shipping Condition: Good Location: Addison, United States Manual Fits Hendey Lathe 4th Edition. 4 Cone & Gear Head Lathes Operator.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification： Attention: Please check your connector size and color make sure match in picture before ordering. Due to different machine versions, you ... moreconnector may not fit. Professional floor scrubber/ pallet jack charger for 24V lead acid battery system with Anderson style RED SB120 connector. Please send us a message if you need 120 BLUE connector or at a different size connector Feature： Fully automatic 3 stages charging with LED indicator lights Can be used either as onboard or portable charger For all types of lead acid batteries - Wet, AGM, GEL Advanced safety features - Over current, voltage, polarity reversed short circuit protections.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Fitment: For Bobcat Skid Steer Loader A300, S250, S300, S330, T300, T320 Description: -Part Name:Hydraulic Lift Cylinder -Condition:Aftermarket New -Part ... moreNumber: 6817310 7106456 -Applications: For Bobcat Skid Steer Loader A300, S250, S300, S330, T300, T320 -Dimensions: (As Shown) Package Include： -1* Lift Cylinder -W/o Product Instruction Notes： -If You Are Not Sure The Item 100% Fit For Your Vehicle Before Your Purchase..
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: -Part Name:Hydraulic Lift Cylinder -Condition:Aftermarket New -Part Number: 6811996 -Applications: For Bobcat Skid Steer Loaders 873 883 ... more-Dimensions: (As Shown) Package Include： -1* Lift Cylinder Fitment: For Bobcat Skid Steer Loader 873 883 6811996 UPC Does not apply Brand turitrade Type Lift Cylinder Manufacturer Part Number 6811996 Manufacturer Warranty 90 Day Condition New Compatible Equipment Make For Bobcat Compatible Equipment Type Skid Steer Loader MPN 6811996 Model 873 883.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Fitment: For Bobcat Skid Steer 653, 751, 753, 7753 Description: -Part Name:Hydraulic Lift Cylinder -Condition:Aftermarket New -Dimensions: (As Shown) ... more-Part Number:6531324 6586575 7142833 -Applications:Skid Steer Loaders 653 751 753 7753 Package Include： -1* Lift Cylinder -W/o Product Instruction Notes： -If You Are Not Sure The Item 100% Fit For Your Vehicle Before Your Purchase. -Please Allow 1-3CM Differs Due To Manual Measurement. -Due To The Different Display And Different Light, The Picture May Not Reflect The Actual Color Of The Item. Thanks For Your Understanding..
Buy It Now
$4.00 Shipping Condition: Brand New Location: Norwalk, United States Part of a large collection of product and catalog sheets that arrived fresh out of a file cabinet secured in file folders. They feature a quality treated ... more/ smooth finish. 8 1/2" x 11". over 40 years.
Buy It Now
$3.97 Shipping Condition: Good Location: Houston, United States 1640 1660 Precision High Speed Lathe. Operator & Parts Manual Fits LD. Not for a COLLECTOR.
Buy It Now
$4.00 Shipping Condition: Brand New Location: Norwalk, United States Co c1920s Industrial Lathe Work Sample Catalog Product Sheet. Part of a large collection of product and catalog sheets that arrived fresh out of a file ... morecabinet secured in file folders. They feature a quality treated / smooth finish.
Buy It Now
$6.05 Shipping Condition: Brand New Location: Wilton, United States For year 1947. 8 1/2 X 11" format, lay flat when open. New reproduction of parts Manual, Printed in black and white. I have a large database and have ... moreonly listed a fraction of thus far. Things happen.
Buy It Now
Free Shipping Condition: New Location: Suwanee, United States Model JS20N. Universal Mini Chuck Jaw Set - JS20N. NOVA 0.78 in. Universal Mini Chuck Jaw Set. Compatible Models NOVA Chucks except 8012 Infinity Quick ... moreChange Chuck. Special NOVA dovetail profile designed to provide maximum strength and holding in wood turning applications without crushing wood fibers.
Buy It Now
Free Shipping Condition: New Location: Webberville, United States Replaces Part Number: L30487. Fits Case-IH Fork Lift Models: 584C, 584D, 584E, 585C, 585D, 585E, 586C, 586D, 586E. Fits Case-IH Backhoe Loader Models: ... more480C, 480D, 480E, 480E LL, 480F, 480F LL, 480LL, 580C, 580D, 580K, 580SD, 580SE.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification： Attention: Please check your connector size and color make sure match in picture before ordering. Due to different machine versions, you ... moreconnector may not fit. Professional floor scrubber/ pallet jack charger for 24V lead acid battery system with Anderson style RED SB120 connector. Please send us a message if you need 120 BLUE connector or at a different size connector Feature： Fully automatic 3 stages charging with LED indicator lights Can be used either as onboard or portable charger For all types of lead acid batteries - Wet, AGM, GEL Advanced safety features - Over current, voltage, polarity reversed short circuit protections.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification： Attention: Please check your connector size and color make sure match in picture before ordering. Due to different machine versions, you ... moreconnector may not fit. Professional floor scrubber/ pallet jack charger for 24V lead acid battery system with Anderson style RED SB120 connector. Please send us a message if you need 120 BLUE connector or at a different size connector Feature： Fully automatic 3 stages charging with LED indicator lights Can be used either as onboard or portable charger For all types of lead acid batteries - Wet, AGM, GEL Advanced safety features - Over current, voltage, polarity reversed short circuit protections.
Buy It Now
Free Shipping Condition: Good Location: Hillsville, United States Auction is for a original Hitachi Seiki Manual with some shop and age wear.
Buy It Now
Free Shipping Condition: New Location: United States Quantity: 10pcs. These ball knob handles are universal fit and can be used for all machine tools. These ball knob handles are made of high quality plastic ... morefor durability and long service life. There are total ten pieces of ball knob handles in one set that you can use for many machine tools.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Fitment For: This is a custom assembled carburetor repair kit For Farmall Cub tractors with IH made carburetors. Will not fit for Zenith replacement carburetors. ... morePackage Content: 1x Carburetor Rebuild Kits Features: 100% brand new and high quality. Professional installation is highly recommended(Customer Service Technical Guidance). Please confirm your old part number and size matches up with one of the part numbers and pictures above. Part Type Carburetor Repair Kit Brand ALL-CARB MPN Does Not Apply Warranty 1 year UPC Does not apply.
Buy It Now
$4.00 Shipping Condition: Brand New Location: Norwalk, United States Part of a large collection of product and catalog sheets that arrived fresh out of a file cabinet secured in file folders. They feature a quality treated ... more/ smooth finish. over 40 years. I hope that you enjoy them as much as I have while owning them.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Item Information Replaces OE Numbers: Ford/New Holland: 8N12127B Fits: For Ford/New Holland 8N 1-year protects you after your purchase. We're confident ... morethat our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement Power source type: Electric UPC Does not apply Compatible Equipment Make for Ford/New Holland Compatible Equipment Type Tractor Brand powerpump Part Type Tractor Distributor Warranty 1 year MPN 8N12127B Model 8N.
Buy It Now
$3.97 Shipping Condition: Good Location: Addison, United States 10 Lathe Service Parts Manual Fits. Printed Manual.
Buy It Now
$6.05 Shipping Condition: Brand New Location: Wilton, United States LeBlond Lathe Dual Drive No. 4 Owner and parts Manual 43 pages year 1956 43 pagesNew reproduction of Owner Parts Manual, to be printed in black and whiteGlossy ... moreprotective coverHeavy card stock front and back covers.Comb binding8 1/2 X 11" formatMade in the USAIf you are looking for a hard to find manual or parts manual please let me know. I have a large database and have only listed a fraction of thus far.If you are unhappy with your purchased in anyway please contact before leaving feedback. I would much rather send a replacement or a refund than have an unhappy customer. Things happen. Lost in the mail is a common problem. Sometimes tracking doesn't update in the progression of the mail chain. I will be happy to work with you.
Buy It Now
$45.00 Shipping Condition: New – Open box Location: Simi Valley, United States 7 1/2 X 7/8 VARI DRIVE.
Buy It Now
$3.97 Shipping Condition: Good Location: Addison, United States 10-AA High-Speed Precision Lathe. Operator & Parts Manual Fits Harrison. Not for a COLLECTOR.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Brand New Aftermarket Drive Belt Application(s) Fit for Bobcat Loader(s): 753, 763, 773, S130, S150, S160, S175, S185, S205, T140, T180, T190 Specifications ... morePart Number: 6726898 Flat, cogged drive belt with 3 groves Quantity: 1 Parts can vary depending on your serial number. Email us your serial number before ordering to ensure the correct part for your equipment. Brand turitrade Part Type Drive Belt MPN 6726898 Compatible Equipment Make Fit for Bobcat UPC Does not apply.
Buy It Now
Free Shipping Condition: New Location: Suwanee, United States Model 6039. Cole Jaw Extension - 6039. NOVA 12 in. Cole Jaw Extension. Extends your 12 in. Cole Jaws (Model 6040) to 15 in. Precision Die Cast construction ... morefor durability and long life. Construction Cast Aluminum.
Buy It Now
Free Shipping Condition: Acceptable Location: Des Moines, United States We will always make things right.
Buy It Now
$6.05 Shipping Condition: Brand New Location: Wilton, United States Logan Lathe No. 400 Parts List manual. I have a large database and have only listed a fraction of thus far. New reproduction of parts Manual, Printed ... morein black and white. 8 1/2 X 11" format, lay flat when open.
Buy It Now
$4.00 Shipping Condition: Brand New Location: Norwalk, United States Part of a large collection of product and catalog sheets that arrived fresh out of a file cabinet secured in file folders. They feature a quality treated ... more/ smooth finish. 8 1/2" x 11". over 40 years.
Buy It Now
Free Shipping Condition: Good Location: Hillsville, United States Auction is for a original Hitachi Seiki Manual with some shop and age wear.
Buy It Now
$6.05 Shipping Condition: Brand New Location: Wilton, United States Cincinnati LR Hydrashift, Lathe, Service and Parts Manual 1962. Comb binding. New reproduction of Owner/Operator Manual. Glossy protective covers front ... moreand back.
Buy It Now
$3.77 Shipping Condition: Good Location: Surprise, United States
Buy It Now
$4.00 Shipping Condition: Brand New Location: Norwalk, United States Part of a large collection of product and catalog sheets that arrived fresh out of a file cabinet secured in file folders. They feature a quality treated ... more/ smooth finish. 8 1/2" x 11". over 40 years.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Fitment: For Bobcat Skid Steer Loader(s) 630, 631, 632, 641, 642, 643, 645, 730, 731, 732, 741, 742, 743 Description: -Part Name: Hydraulic Tilt Cylinder ... more-New Aftermarket Replacement -Dimensions: As Shown -Part Number:7104437 6593398 6539810 6598067 -Applications:For Bobcat Skid Steer Loader(s) 630, 631, 632, 641, 642, 643, 645, 730, 731, 732, 741, 742, 743 Package Include： -1* Hydraulic Tilt Cylinder -W/o Product Instruction Notes： -If You Are Not Sure The Item 100% Fit For Your Vehicle Before Your Purchase..
Buy It Now
Free Shipping Condition: New Location: Chino, United States Fitment: For Bobcat Skid Steer Loader 873 883 6811996 Description: -Part Name:Hydraulic Lift Cylinder -Condition:Aftermarket New -Part Number: 6811996 ... more-Applications: For Bobcat Skid Steer Loaders 873 883 -Dimensions: (As Shown) Package Include： -1* Lift Cylinder -W/o Product Instruction Notes： -If You Are Not Sure The Item 100% Fit For Your Vehicle Before Your Purchase. -Please Allow 1-3CM Differs Due To Manual Measurement. -Due To The Different Display And Different Light, The Picture May Not Reflect The Actual Color Of The Item. Thanks For Your Understanding..
|
|
|
|
Sony magnescale LH10 2 axis Lathe DRO system Hardinge
Removed from Hardinge hlv-h lathe. Perfect working order. Needs a little cleanup. Z scale model sr-1711(21.6" and X scale model sr10- 020A(6.875" Posted with the
|
|
|
KIA MODEL KIATURN 21 CNC LATHE w/ SPEGO BAR FEED
KIA Model KIA Turn 21 CNC Lathe New in 1996 Specifications: X Axis travel 6” X Axis Rapid Traverse 984 IPM Z Axis travel 16” Y Axis Rapid Traverse 1181 IPM Spindle Speed 2 to 4000 RPM Programmable Feed Rate.01/ min. Bar Capacity 2” Chuck Size 8” Horsepower 20 Equipped With: Yasnac LX-3 CNC Control Chip Conveyor Parts Catcher Spego Bar Feed(10 ft) not pictured Coolant Pump& Tank Spindle RPM Programmed to 2 RPM 8” 3-Jaw Chuck Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
TRAV-A-DIAL INCH & METRIC TRAVEL DIAL READOUT SOUTH BEND LATHE BRIDGEPORT MILL
This i s a Trav-a-dial travel dial readout. Model 7S. In good working order. Measures in inch and metric. Good for lathe or mill. Mounting bracket included. Bezel has a small crack as seen in pictures. This is a used item. Normal wear condition.
|
|
|
NEWALL DIGITAL READOUT Lathe Packages
Item Name: NEWALL DIGITAL READOUT Lathe Packages Item# 9368 Price/Each: $2.150.00 Year: Brand Name: NEWALL Model: DP700 Serial# Asset Tag: Item Location City: Watertown State: Connecticut Zip Code: 06787 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description Newall DP 700 Lathe Packages INCLUDES: DP700 DRO Display- 2 Axis Encoder Assemblies- Microsyn 2G 10um on Cross Slides with 10" of travel and under. Spherosyn 2G on Cross Slides with 12" of travel and over, Spherosyn on Carriage. Lathe Bracket Kit Headstock Display Mount or Carriage Mount 6" x 40" 8" x 40" 10" x 40" $2150- Contact Us ... moreAbout This Machine Should you have questions. Please contact David Drozdenko at 860-484-4449 Item Details Item Information Item Name: NEWALL DIGITAL READOUT Lathe Packages Item# 9368 Price/Each: $2.150.00 Year: Brand Name: NEWALL Model: DP700 Serial# Asset Tag: Item Location City: Watertown State: Connecticut Zip Code: 06787 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description Newall DP 700 Lathe Packages INCLUDES: DP700 DRO Display- 2 Axis Encoder Assemblies- Microsyn 2G 10um on Cross Slides with 10" of travel and under. Spherosyn 2G on Cross Slides with 12" of travel and over, Spherosyn on Carriage. Lathe Bracket Kit Headstock Display Mount or Carriage Mount 6" x 40" 8" x 40" 10" x 40" $2150- Contact Us About This Machine Should you have questions. Please contact David Drozdenko at 860-484-4449 or email or use the"Ask a Question/ Make an Offer" form below Ask a Question/ Make an Offer Name: Phone: Email Address: Co
|
|
|
DRO PACKAGE 18" x 60" LATHE USED DIGITAL READOUT
This was removed from a 18" x 60" lathe that was being traded in. What you see in the photo's. Is what you get. Comes with all the brackets that was used to mount it on the lathe. The only way I have to test it is as shown. Plug it in and slide the scales thru the reader heads. It works good. Starting Bid.99 NO RESERVE PLEASE READ BELOW THIS IS VERY HARD FOR SOME PEOPLE TO UNDERSTAND! Web definition) continental united states: The Continental United States is the area of the United States of America comprised of the 48 states that are south of Canada and north of Mexico IF YOUR CONFIRMED ADDRESS ON YOUR EBAY ACCOUNT IS NOT IN THIS AREA PLEASE DON'T WASTE YOUR OR MY TIME! I DON'T SHIP OUTSIDE THE CONTINENTAL UNITED STATES. CONTINENTAL UNITED STATES ONLY. Item does not ship outside the continental united states. Seller ... moreprefers paypal. Item must be payed in full within 5 days of auction end! US SALES ONLY! US SALES ONLY!
|
|
|
Newall DP8 Digital Readout and Sending Unit, 2 Axis (Lathe)
For Sale is a used Newall DP8 Digital Readout and Sending Unit. 2 Axis(Lathe) Model 8DL211000. Included are power and display cables. This digital readout is used with spherosyn and microsyn linear scales. Scales are NOT included. This is used in working condition. Exact Stock# 0339
|
|
|
ACU-RITE II 2 AXIS DIGITAL READOUT CONTROL CONSOLE LATHE MILLING MACHINE DRO
This is a Acu-Rite II digital readout. One axis is not working properly. It worked fine but is not working correctly after I set error correction switches. I think a switch might be defective. Sold as is for parts or repair. No returns. Model 38.7567.00 Reads.254 for each.100 move.
|
|
|
Acu-Rite III X/Y 2 Axis DRO Milling Lathe Digital Position 387 Readout Display
Acu-Rite III X/Y 2 Axis DRO Milling Lathe Digital Position 387 Readout This unit has been tested with linear encoders and/or scales and works perfectly. This is in used clean condition but works like new. Readout is bright and clear. Comes with power cord. This uses the 2. 6 pin Bendix connectors for 2 scales. Look at all the images Shipping weight is 15 pounds. And can be shipped UPS Ground for $42.98 inside the USA, if you use standard USPS 7 day shipping the cost is $32.26, and 2 to 3 days Priority USPS is $48.15, foreign customers please email me for a quote. Prices might vary on your location. Please email for an exact quote if you require one. Box will be 14" by 14" X 10" and completely padded all over for no damage. Any question please email me. This is sold"as is" no conditions implied or otherwise directed ... moreShipped with delivery confirmation. Added to buyers cost.
|
|
|
Acu Rite Qwikcount DRO Milling Lathe Digital Position Display Readout
Acu Rite Qwikcount DRO Milling Lathe Digital Position Display Readout This is in perfect condition with no damage at all. This has been tested on scales and/or linear encoders and works perfectly. Image shows it mounted on a black metal stand. Measures to.0000 or in ten thousands of a inch. Images shows 2 place. But when connected to scales or encoders it go to tenths or 4 places past decimil. Comes with power cord. Readout is bright and clear. Also comes with an attached metal base. Has the 2. 6 pin Bendix connectors for 2 scales. Weighs 10 pounds. And measures 8" by 7" by 4 1/2" Any question please email me. This is sold"as is" no conditions implied or otherwise directed Shipped with delivery confirmation. Added to buyers cost.
|
|
|
Mitutoyo DRO ALC-3701W ALC3701W 2 AXIS Position Counter Milling Grinding Lathe
Mitutoyo ALC-3701W DRO 2 AXIS Position Counter for Milling. Grinding, Lathe Machines Condition: Excellent. Has minor scratches, marks, stains but fully functional Features: Two AXIS Input& Display Position sensitivity selector 5um& 1um Required Input: 100-240 VAC. 1.0 to 0.5Amp Can accept input from many different Mitutoyo Devices Like Linear Scares. Micrometers, Touch Probes, ect. Tested& guaranteed to work. Buyer has 30 days to return if not fully satisfied. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Used Digital readout DRO mounting arm with tray hardware bridgeport mill lathe
Used DRO Mounting hardware Includes mounting plate. Arm, and table/plate for holding box type readouts such as ACU-Rite turn vision and mill vision DRO Can easily be modified to hold newer type digital readouts but may require fabrication of mount attatchment pc May require drilling and tapping some holes in your machine if the holes and or hole pattern is not already there. Good luck
|
|
|
ACU-RITE 3 DIGITAL 3-AXIS READOUT - VERTICAL MILL , LATHE
NICE CONDITION- TESTED AND WORKS GREAT
|
|
|
12" DIGITAL DRO TABLE READOUT SCALE for BRIDGEPORT MILL LATHE ROUTER TABLE SAW
I Gaging Digimatic Magnetic Remote Digital Readout Product Description Measure Range: 0-12 inch 0-30mm, Accuracy: 0.001" 6" Reading: 0.001" 0.01mm, 1/128" repeating: 0.001" Battery: 3 Volt CR2032 included with 2 spares, Alloy Vertical and Horizontal beam, Large Easy to Read Display, Includes mounting hardware, Remote has 50" cord for ease of mounting, See out other auctions for panel mount USB receptacle. Works with Shumatech DRO 550 and Android DRO
|
|
|
Acu-Rite 2 axis DRO Micro-line for mill milling lathe
For sale is one used ACU-RITE DRO. Micro-Line series. 2 Axis. Model- MILL 2AX DOM OE. Part# 2004013. Power cord included. This unit has been slightly used and is in good working condition. This sale is for the Display only. Scales not included in sale. Buyer is responsible for shipping charge. Email with any questions. Thanks for looking. CONDITION OF SALE: PLEASE WAIT TO BE INVOICED WITH TOTAL BEFORE SENDING PAYMENT. TERMS: Full payment via Pay Pal. Bank check, or company check must be made within 5 days after using the"Buy It Now" option on Ebay. If the item is not paid in full within the 5 day period. The item will be considered forfeit by the buyer and the item will be re-listed. If paying by check(All Checks) Allow for standard check clearing time. approx. 10 days. Items for sale are subject to prior sale. Title to goods does ... morenot pass to buyer until payment is received in full. Texas residents will pay the applicable sales tax unless we(the seller) are provided with the buyers sales tax exemption information. We reserve the right to correct all typographical errors. Buyer has 30 days to pick up paid item. If paid Item is not removed from our warehouse within the 30 day period by the buyer. We, the seller, will consider the unclaimed item forfeit by the buyer and the item will be re-listed. SHIPPING: Buyer is responsible for shipping& insurance of purchased items. Any damage in transit is the responsibility of the buyer and their chosen shipping carrier. LOADING: We(the seller) can load on customers provided truck free of charge unless otherwise noted in the item(auction) description herein. Crating/Boxing charge will be assesed on a per item basis. Canada and Mexico customers/buyers to pay all taxes. Duties, brokerage fees. WARRANTY: The goods described herein are pre-owned used goods and are offered"As Is" Seller makes no warranties or liability of any kind whatsoever. Expressed or implied, of merchantability and fitness for a particular purpose. All specifications and descriptions o
|
|
|
12" (30 cm) Digital Readout Qill for Mini-Mill, Lathe - Used/Exclnt cond.
This is a used 12" travel digital readout for a mini-mill. Lathe, router table, etc. Accuracy is about 0.002" full scale, with a resolution 0.0005" Reads in inches or millimeters at the push of a button. Eliminates problems due to lead screw backlash when you're trying to make precise parts. A zero button makes repeatable. Accurate cuts easy. Comes with an extra set of mounting brackets. Since I modified the first set to fit on my mini-mill. Battery operated using the common AG13/LR44/SR44/357/303 watch battery. Unfortunately. My last spare battery was starting to leak, so this unit does not come with a battery, but you can purchase one online or in any supermarket. Original price about $70. Get it for a deep discount in excellent condition! In very good shape. Never used with liquid coolants or cutting oils, so it's ... morevery clean. Payment Methods: PAYPAL is preferred for fastest service. Confirmed buyers are preferred. The item WILL NOT BE SHIPPED UNTIL THE PAYMENT COMPLETELY CLEARS! Serious bidders only. Please; bidders who do not follow through with the deal or who attempt to provide false information or bad payment are at risk to receive negative feedback. All sales are final. I like to leave positive feedback with my buyers and want them to do the same. If you are considering leaving negative or neutral feedback. Please contact me first to resolve any issues. I reserve the right to deny the purchase of any item to bidders with low or excessive negative feedback. I attempt to provide information as accurately as I can. As always. Bid with care.
|
|
|
Mitutoyo DRO Digital Readout Read Out PM-31L X-Axis for lathe/endmill
This auction is for the DRO pictured. Powers up and does as pictured but I have no scale to test it with therefore I am selling it as is and as pictured.
|
|
|
mitutoyo digital readout dro mill milling machine lathe machinist tools 2 axis
Nice working Mitutoyo 2 axis digital readout for milling machine or lathe. It reads in inch and millimeters. It has 6 pin female connections for cables and linear scales. Comes as pictured. Take a look at my other items. Thank you.
|
|
|
HEIDENHAIN ND780 DRO Digital Readout 3axis Milling Drilling Boring Lathe Germany
For your consideration is a mint condition HEIDENHAIN ND-780 DRO Digital Readout used for Milling. Drilling,Boring and Lathes up to 3 Axis Included: Data Cable- see photos and Power cord Specs: atechauthority.com/pdf/nd780_manual.pdf#page=1 Length gauge inputs- 1 VPP or 3 x 11 µAPP 15-pin D-sub connector(automatic detection of interface) Status display- Operating mode REF. Reference-point number, tool number, inch, scale, feed-rate display, stopwatch, Tool compensation R+, R– Features: 10 reference points- REF reference mark evaluation for distance-coded and single reference marks- Distance-to-go display with nominal position input in absolute or incremental values- Scaling- mm/inch switching- On-screen operating instructions- Stopwatch. Calculator- Calculation of positions for hole patterns(circular and linear patterns) Tool-radius ... morecompensation- Probing function for reference-point acquisition with the KT edge finder: `Edge.` `Centerline` and `Circle center`- Cutting-data calculator- RS-232 data port Error compensation: Axis error: Linear and nonlinear over up to 200 points- Backlash compensation: For linear measurement via spindle and rotary encoder
|
|
|
Fagor DRO scale TMKT mill lathe
Used scale 17" from end to end. Bought to work with my bridgport and found out it would not work with the DRO I have.
|
|
|
Anilam Glass Scale Linear Encoder Lathe/Mill 36" with Cable "Not Working"
This is a Anilam Scale that was not working right and I took apart and noticed the small mirror on the reader was cracked. The small mirror is about 1/4" wide and 1-1/4" long. The main mirror appears fine. The cable is also fine and measures 68" long. The Scale is total 39 1/2" long and I believe it to be a 36" working length. N0. 065 62147 System A-10
|
|
|
Newall Digital Read Out DP 8 Lathe (2 Axis) + Digital Sending Unit DP8
Used* Newall Digital Read Out DP 8(2 Axis) + Digital Sending Unit DP8* Used 100% working and signs of use. What You See Is What You Get. Buy With Confidence. SHIPMENT ADRESS and PHONE NUMBER: Please mail always after the buy your phone and shipping address. SHIPPING: Shipment will always be done fast as possible max. 48 ours after the payment on working days. Shipment always with track& trace and insurance. Buyer is responsible for shipping and handling charges. All parts are on stock. Shipping time +/ 17 working days outsite Europe. Shipping with your own forwarder is posible on your own forwarders account. Europe buyers need to pay 21% VAT. PAYMENTS: Payment(s) for purchases are made via PayPal or our Bank account. Payment with PayPal the shipment will be always on the same address as the PayPal account. QUESTIONS: Please E-mail us ... morewith your questions to part4part.com DISCLAIMER: Part4part.com makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. IMPORT/ TAXES: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. PART4PART.COM Would greatly appreciate hearing from you if anything was wrong with shipping or packaging.
|
|
|
ACU-RITE VUE 2XT DIGITAL READOUT DRO FOR MILL OR LATHE
Make: Acu-Rite Model# VUE 2XT Condition: GREAT Specifications: Volts: 100/240. Hz: 50/60. 2 Axis. Comes as shown in pictures. GT Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive a 30% discount per item. This Only Applies To Tooling Items with a Total Gross Weight of Under 100 Lbs. Machines are Not Included in this Offer. This Will be Final on All Transactions Unless Prior Arrangements are Agreed Upon Before The End Of The Auction. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-148003e6608-0x10d-
|
|
|
Newall DRO C80 Digital Readout 2 Axis Mill / Lathe
I have a used Newall DRO c80 this is in very good condition. I am selling the DRO without scales. Everything is in great working order last time I used it.
|
|
|
Sargon Glass DRO linear scale 40+" travel model 105IM-40 for Lathe or Mill
For sale is a very nice USA made Sargon DRO scale model 105IM-40. It has 40+ inches of travel. And the total length is 4' It does not appear to have ever been installed, though there are some light blemishes on the outer housing. I've opened up the housing in the pictures so you can see details of the glass scale and encoder, they're both in perfect shape as near as I can tell. Although the DRO box is not included, you can see it in action here: this unit is tested and works great. It does not come with any other mounting hardware. if you have questions. Please ask and I'll try to answer them. Local pickup in Seattle is free! Please note that I will NOT ship this item internationally. If you REALLY. REALLY need it shipped outside of the United States, please contact me via ebay and we'll talk.
|
|
|
NEW EASSON GS10 600MM (23 3/4″) OPTICAL LINEAR ENCODER SCALE FOR DRO LATHE
here. This is a NEW Easson GS10 600mm(23 3/4″ Optical Linear Encoder Scale for a lathe with DRO System. Model# No:GS100600 The Easson GS10 precision optical glass grated scale, Comprised of a rigid aluminium extrusion with slotted end blocks for simple adjustable mounting, The encoder beam features a double layer lip seal to give extra protection from contamination, The reading head offers several mounting points for through hole or easy attachment to brackets and additional mounting hardware, Pre-fitted with armoured cable and connector, Additional interfaces are available to combine axis or convert the output to suit other manufacturer’s equipment, A separate over cover is also included to provide additional protection from coolant ingress and external impacts, For compatible display consoles please check the display console compatibility ... moreguide below, Please feel free to contact our technical staff for assistance, Reading Length– 600mm(23 3/4″ Resolution– 0.005mm, Encoder Type– Optical, Encoder Output– TTL(A. B& Z) Quadrature, Cable Type– Flexible Armoured, Cable Length– 3 Metres, Protection– IP53, Go to our website: We accept the following payment methods: Visa. Mastercard, American Express& Discover Via Paypal. Please contact us if you have any questions. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1497eb965b4-0x116-
|
|
|
FUTABA PULSCALE FMR / LATHE / MILLING MACHINE
THESE WERE REMOVED FROM A MACHINE WHEN IT WAS NO LONGER NEEDED. THE SCALES WERE FULLY FUNCTIONAL PRIOR TO REMOVAL. WHAT YOU SEE IS WHAT YOU WILL RECEIVE.
|
|
|
Newall C80 DRO for Manual Lathe 18" x 120"
Equipment is used. Parts were on an old lathe that was worth less than this DRO. Equipment is all there minus a few bracket screws. This is an as is sale. Equipment was working when it was removed from lathe. Buyer to setup and pay shipping.
|
|
|
Anilam digital read out console A163-20000 milling turning lathe system tooling
Estate find. From closed machine ship, tested and powers up only, otherwise completely UNTESTED. AS IS AS SHOWN, will take off bracket for safe shipping. Please see my other auctions for quality and vintage mechanics tools. Chainsaws, logging tools, blacksmith& tinsmith tools, steampunk items, pulleys, hardware, garden cultivators, and tools; primitives, and more. We will be liquidating a large estate consisting of military items. Woodworking tools, automotive tools, machinists tools, mechanics tools, collectibles, antique and primitives and more. Please put us in your favorites you will not be disappointed. Please note. Unless noted as new, the items I am auctioning are old and/or used. Because of this, they are sold AS IS, as found, the same as in any other auction. I will try to describe these items to the best of my ability and would ... morenot misrepresent anything intentionally. I list the defects, problems and imperfections I see on the items, but I can sometimes miss something or make a mistake. I will admit that I am not an expert on everything I sell so please look at the pictures for condition and e-mail me with any questions before bidding. I try to answer every question asked, but cannot guarantee an answer if you ask the day the auction ends. All items are sold AS IS AS SHOWN. NO REFUNDS AND NO RETURNS. INTERNATIONAL BUYERS PLEASE E-MAIL FOR SHIPPING COST BEFORE BIDDING. PLEASE CHECK WITH YOUR COUNTRIES SHIPPING RESTRICTIONS BEFORE YOU BID. WE WILL NOT BE RESPONSIBLE IF ITEMS CANNOT BE LEGALLY SHIPPED TO YOU. ALSO PLEASE DO NOT ASK US TO SHOW AS A GIFT OR MISREPRESENT THE CONTENTS OR VALUE. WE WILL NOT! Please see the shipping calculator. E-bay is now charging fees on the shipping also, I normally ship via USPS or UPS. We have a handling/packaging charge of $6.00 included in our shipping charges(this is not your total shipping, you must see the shipping calculator or flat rate shipping in the item description)Our $6.00 covers packaging material and time and gas to get it to the Post Office or UPS offi
|
|
|
Genuine BAUSCH & LOMB ACU-RITE II DIGITAL POSITION READOUT 2 AXIS LATHE MILLING
UP FOR SALE: Used-ORIGINAL-OBTAINED FROM GOVERNMENT SPARE SURPLUS(LANL) Working Important Note: the large key assembly named(ABS) on fornt panel to cover the two exposed lights show on pictures is missing and need to be replaced.May could be use asis please look at the pictures Genuine BAUSCH& LOMB ACU-RITE II DIGITAL POSITION READOUT 2 AXIS LATHE MILLING PAYPAL FOR PAYMENT 30 DAYS RETURN BUY WITH CONFIDENCE 12 pound of weight average $32.00 SHIPPING USPS Priority Mail BOX PACKAGE TO THE CONTINENTAL US ONLY EMAIL FOR ANY QUESTION THANK YOU
|
|
|
Bridgeport Textron DRO for Mill ot Lathe
Bridgeport Digital Readout made by Textron. Older unit that appears to work ok. After it warms up it presets ok. Displays mm or inch, and when a scale is hooked up it counts on both axis up and down. This auction is for the DRO only and I will be listing the scales later. Please email with any questions. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14ab832ebfe-0x115-
|
|
|
NICE! FAGOR 20i-T UL 2-AXIS DIGITAL READOUT DRO FOR MILL OR LATHE W/ BRACKET
We Have 1.000's of New And Used MetalWorking Machines And Tooling! If You Have Any Questions Or Are Looking For Something Particular Call Us@ 909.919.9600! NL Condition: Pristine Specifications: Input: 100-240 V A.C. 0.2A. Frequency: 50-60 Hz. Comes as shown in pictures. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted. Shipping on Multiple Items: We charge the first item’s shipping in full. Every item’s shipping cost after that will receive a 30% discount per item. This Only Applies To Tooling Items with a Total Gross Weight of Under 100 Lbs. Machines are Not Included in this Offer. This Will be Final on All Transactions Unless Prior Arrangements are Agreed Upon Before The End Of The Auction. Click Here. Double your traffic. Get Vendio Gallery- Now ... moreFREE! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Sony 2 Axis LH 52 DRO for Lathe (Inv.20483)
Sony 2 Axis LH 52 DRO for Lathe Nice Working unit as removed from lathe. Includes cables and mounting hardware as shown. Scale lengths overall 18-1/2 Inches and 67-1/2 inches. Inv.20483) Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: All international sales are subject to a $15 surcharge ... morein addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions
|
|
|
ECOCA EL6120E STRAIGHT BED LATHE W/ MITSUBISHI 520L CONTROL 20 HP 220/440V 3PH
Welcome to Select Machine Tool Item Description: Ecoca Model EL6120E Straight Bed Lathe w/ Missubishi Control SPECIFICATIONS: Swing Over Bed 24” Swing Over Crosslide 15.75” Distance Between Centers 80” Width Of Bed 15.75” Spindle Drive 11/15kW. 15/20Hp· Spindle Speeds(Low Range) 33-265 RPM· Spindle Speeds(High Range) 250-1600 RPM· Spindle Nose D1-11 Camlock· Spindle Bore 4.13· Longitudinal Work Stroke(Z-Axis) 80” Transverse Work Stroke(X-Axis) 11.42” Feed Force Longitudinal(Z-Axis) 1.524 lbs. F· Feed Force Transverse(X-Axis) 762 lbs. F· Rapid Traverse 394 IPM· Feed Range Manual Mode 0.0004-19.68 in/Rev· Top Slide Travel 5.9” Top Slide Width 5.9” Tailstock Quill 3.54” Diameter· Tailstock Quill Stroke 5.9” Tailstock Quill Taper MT#5· Net Weight 13.310 lbs. Dimensions 162”L x 80”D x 72”H ... moreSTANDARD EQUIPMENT: Interlocked Safety Guard· AC Servo Motors& Precision Ground Ball Screws On Both Axes· Automatic Slideway Lubrication· Ergonomically Mounted Operator Controls· Coolant System· Pull Out Chip Pan On Wheels· High Intensity Machine Light· Spindle Center Bushing· Tool Kit· Operation Manual· Tailstock Center· Electrical Handwheel 2-Axis Additional Accessories: 15" 3-Jaw Chuck w/ Extra Jaws Dorian SD40CA Tool Post w/ Holders Drill Chuck w/ Arbor(2) Live Centers(1) Dead Center(3) Steady Rest History: When you buy from Select Machine you are not only buying from a reputable dealer but also a sales and service staff with well over two hundred years of combined experience. We want you to be happy and we also want to help you in any way possible. So if you have a question or are looking for something special please call or e-mail us so that we may earn your business. We want to build relationships with our customers and the best way to do that is by providing quality products. Honest representations, value, and service. Again. We want to thank you for your time and interest and we look forward to earning your
|
|
|
Farrand Controls DRO with 30ft cable Cat# 216370 DC51290 CNC Lathe Mill Brunson?
0 false 18 pt 18 pt 0 0 false false false DESCRIPTION AMSL LLC Reference#200-50 U.S. Sale and Shipment Only. This listing is for a Farrand Controls Digital readout unit with cable. The data plate on the back shows DC number of 51290. And a catalog no. of 216370. Includes a long cable(approx. 30ft) Tested for power-up and keyboard operation. The display numerals looks good with only 1 single segment not lighting-up. Input is 110V AC 1ph. CONDITION: Used. Good overall. Tested for power-up and keyboard operation only. The display looks good with only 1 single segment of 1 digit not lighting-up. THIS EQUIPMENT IS OFFERED WITH OUR GUARANTEE. This equipment is guaranteed for the first 14 days following delivery to your shipping address. If the item is found to be discrepant. For a refund you must notify us of the problem by e-mail within the first ... more14 days following delivery to your shipping address. The item must be returned to our Vermont facility prepaid with any returns received within 7 days of advising us of the return. Upon receipt of the item at our Vermont facility in undamaged condition, your BID PRICE will be promptly refunded. SHIPPING INFORMATION U.S. Sale and Shipment Only. A char ge of 20.00 will appear on your invoice for insured shipping& handling by FedEx Ground. An additional surcharge of $35.00 will apply to shipments to AK. HI, Guam, etc via the USPS. Pickup in Vermont is possible. FULL PAYMENT MUST BE RECEIVED IN OUR OFFICE WITHIN 4 DAYS of our e-mailing an invoice or payment request. Buyers not paying within 4 days of our invoice will be considered to be non-paying bidders. Late payments may result in shipping delays depending on our schedule. DISCLAIMER Equipment described and offered here is no way certified for. Recommended for, or offered for any specific use under any circumstance. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment. The purchaser, by biddin
|
|
|
Newall Lathe Bracket Kit, P/N: LBK01 - INCOMPLETE KIT
Newall Lathe Bracket Kit. P/N: LBK01 missing the following: 1) Single End Mount. P/N: 294-23010, 1) Flat Bar. P/N: 294-22460, 1) Angle- 2" X 2" P/N: 294-22520, 5) 1/4"20 X 3/4" Socket Head Screw, 2) 10-32 X 3/4" Socket Head Screw, 4) 10-32 X 1/2" Set Screw, 1) 10-32 X 1/2" Socket Head Screw Click to see the kit contents directly from the Newall website. This was purchased as part of a 3-axis digital readout(DRO) system for a mill. Before I installed the DRO on said mill. I sold it. As a result. I installed part of the DRO system on a lathe(which has since been sold) I will guarantee this item to work as it should and not be dead on arrival as well as offer a 30-day return if the item is not as described. We will leave feedback after we have received feedback. This is to make sure the purchaser is 100% satisfied ... morebefore completing the transaction. I will ship this item anywhere in the lower 48 states via UPS. I am sorry. But currently I am only in a position to accept PayPal. The item will ship within 24 hours of receiving payment unless received on a Friday or Saturday. If payment is received on a Friday or Saturday. It will ship the following Monday. If you have any questions. Please feel free to e-mail me through e-Bay and I will do my best to answer them to the best of my ability in a timely manor. Thank you for looking at my auction and please check out my other auctions. Note: This item is sold as-is with no warranty expressed or implied. I do NOT send second chance offers. If you get one for this auction, it is NOT from me.
|
|
|
Newall DP7 Lathe Digital Readout Display Unit
Newall DP7 Digital Readout Display Unit for a Lathe. Got a new unit with 3 axis so no longer have use for this one. Has not been used in sometime. Therefore, unit is sold"as is" Ships from Troy. NY 12180.
|
|
|
ANILAM MINI WIZARD A1632000 Digital Readout For Lathe + Arm & Wiring U.S.A.
ANILAM MINI WIZARD Digital Readout/Arm From A Lathe. Anilam Electronics Corp. Miami. Florida. We are selling this for a Mennonite friend. He bought the lathe at an estate auction and of course cannot use the Digital Readout. He was told that it worked. All I know is that it lights up and displays numbers. The arm and wiring are with it. The ground wire needs put back together. It came loose when I took it off. Information on it: Anilam Mini Wizard. P/N A1632000, S/N 9071522628, C/O 25900, 58 Watts 10 50/60 HZ. U.S.A. There is no manual with it. Cosmetic condition is good. Little dirty and needs a bit cleaning up. No fray wires. They all look good. 14 day return policy. PAYMENT DETAILS Payment through Paypal only. 3 days after auction end To pay or Buy Now-Please Pay Now. SHIPPING DETAILS We usually ship 1 st business day after payment through ... morePaypal. We ship ONLY to the address on file. So be sure the Address on file is correct. WE DO NOT DO INTERNATIONAL SHIPPING. RETURN POLICY 14 day return policy on badly misrepresented items. Item must be returned in the ORIGINAL box or envelope it was sent in. Same packaging material, same condition and same that was sent. If there are several parts to the item, they ALL must be sent back in the return. The buyer pays the return shipping. I will inspect the item when returned and judge if money is to be refunded. If damaged in transit. Please contact me right away. FEEDBACK POLICY Once you have received your item and are happy with It. Please leave Positive Feedback for the transaction. Before leaving neutral or negative feedback. Please contact me first to work it out. We definitely will return feedback for you.
|
|
|
ACU-RITE ACU RITE 2 AXIS DIGITAL READOUT #200S-2XG LATHE MILLING MACHINE
ACU-RITE DIGITAL READOUT MODEL#200S-2X-G 2 AXIS MODEL THIS IS THE DIGITAL READOUT ONLY. NO SCALES THIS WAS NOT USED ON A MACHINE. HARD TO TELL IF IT WAS USED AT ALL. MIGHT HAVE BEEN USED IN A LAB ENVIRONMENT APPLICATION. SUPERB CONDITION POWERS UP AND WORKS AS IT SHOULD POWER CORD NOT INCLUDED. CORD WAS USED FOR TEST PURPOSE ONLY $20.00 S&H USPS PRIORITY MAIL INSURED
|
|
 |