|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Washington, United States We reserve the right to apply the policy at our discretion. If you make a mistake, we are reasonable and will work with you. We will accept it back. It ... moreis your RESPONSIBILITY to do your research and to be sure this is the EXACT item for your application.
Buy It Now
$6.00 Shipping Condition: New Location: Manteca, United States
Buy It Now
$6.95 Shipping Condition: New Location: Edinburg, United States MTX50, MTX60, MTX70, MTX80, MTX90. Filter is Not made in China. Replaces Mikasa OEM # Air Filter. Secondary air filter. Suitable for the following applications.
Buy It Now
$12.95 Shipping Condition: New Location: Pompano Beach, United States Mikasa MTX70, MTX80, and MTX90 genuine OEM new EPA fuel tank cap. This Mikasa jumping jack primary fuel tank cap has the following specifications Fits ... moreonly Mikasa MTX70, MTX80, and MTX90. Multiquip-Mikasa 366350460.
Buy It Now
$13.58 Shipping Condition: New Location: Wheatland, United States New Fuel Tank Fits: MQ Mulitquip Mikasa Rammer MT40F HS MT55F MT74F MT65HAComplete kit Fuel tank includes: Tank, Cap, Garment, Fitting, Fuel Shut off ... morevalve. Please contact for further questions. Thank you!
Buy It Now
$12.95 Shipping Condition: New Location: Pompano Beach, United States Multiquip-Mikasa Air Filter Cover Knob. This Air Filter Cover Knob has the following specification(s).
Buy It Now
Free Shipping Condition: New Location: Marlboro, United States Replaces Multiquip OEM Mikasa Clutch Assembly MVC88, MVC88GH, MVC88VGE, MVC88GE. We carry other size clutches if needed. Made from cast iron not thin ... morestamped steel, makes it quite durable and ideal for rugged use.
Buy It Now
$15.45 Shipping Condition: New Location: Beltsville, United States Multiquip Mikasa. Fuel Tank Cap. Make sure the part numbers are correct, certain parts are serial number specific.
Buy It Now
$11.60 Shipping Condition: New Location: Beltsville, United States Multiquip Mikasa. Air Filter and Pre Filter Set. Part Numbers. Make sure the part numbers are correct, certain parts are serial number specific.
Buy It Now
$18.95 Shipping Condition: New Location: Zephyrhills, United States 366120250 FUEL TANK. 366350580 HOLDER, FILTER. 050250420 O-RING.
Buy It Now
$12.95 Shipping Condition: New Location: Pompano Beach, United States Multiquip-Mikasa MVC88 genuine OEM shockmount. This factory genuine shockmount has the following specification(s) Part number 939010230. Fits Multiquip-Mikasa ... moreMVC88 only. Factory genuine Multiquip part.
Buy It Now
Free Shipping Condition: New Location: Poplar Bluff, United States Set of 4 OEM Shockmounts for Multiquip Mikasa MVC88VGH and MVC88VGHW Plate Compactors. OEM part# 939010230 Froo www.froo.com | Froo Cross Sell. Free Cross ... moreSell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Buy It Now
$325.00 Shipping Condition: Used Location: Hemet, United States
Buy It Now
$11.10 Shipping Condition: New Location: Pompano Beach, United States Multiquip-Mikasa 354010010. Fits MT70, MT75, MT85, MTX70, MTX80, MTX90. This Multiquip-Mikasa Bellows has the following specification(s) Multiquip-Mikasa ... morefactory genuine OEM part. SERVICE NOTE: Parts areserial number specific.
Buy It Now
$12.95 Shipping Condition: New Location: Pompano Beach, United States Fits Multiquip-Mikasa MVC70, MVC80, and MVC82 plate compactors. Multiquip-Mikasa 413332920, 4133-32920. Multiquip-Mikasa Complete Clutch Assembly. This ... moreComplete Clutch Assembly has the following specification(s).
Buy It Now
$25.00 Shipping Condition: New Location: Pompano Beach, United States ReplacesMultiquip-Mikasa 8511S (New Part Number). DHS Quality Parts 11" Wood Shoe Kit. This 11" Wood Shoe Kit has the following specification(s) Replaces ... moreMultiquip-Mikasa 366910020 (Old Part Number).
Buy It Now
$6.95 Shipping Condition: New Location: Edinburg, United States MTX50, MTX60, MTX70, MTX80, MTX90. Filter is Not made in China. Replaces Mikasa OEM # Primary air filter. Pre-Filter/Primary Filter. Suitable for the ... morefollowing applications.
Buy It Now
$15.45 Shipping Condition: New Location: Beltsville, United States Carburetor Assembly.
Buy It Now
$12.95 Shipping Condition: New Location: Zephyrhills, United States Multiquip genuine OEM Cup&Packing replacement part.MTX50HD, MTX60SD, MTX70 HDR, MTX80HDR
Buy It Now
$14.95 Shipping Condition: New Location: Zephyrhills, United States Fits models: MTX70 MTX60 MTX50.
Buy It Now
$12.58 Shipping Condition: New Location: Yuba City, United States This Multiquip Mikasa Bellows is designed to fit a range of models including the MT70, MT75, MT85, MTX70, MTX80, and MTX90. It is a heavy-duty piece of ... moreequipment that is perfect for use in the business and industrial sectors. The bellows is made by NorCal Equipment and is of the highest quality.This rammer and tamper bellows is a non-domestic product that is great for those who are looking for a reliable and durable piece of equipment. It is a custom bundle that comes from Mikasa and has not been modified in any way. If you are in need of a walk-behind compactor, this bellows is a great choice.Fits : MT70, MT75, MT85, MTX70, MTX80, MTX90
Buy It Now
$12.95 Shipping Condition: New Location: El Cerrito, United States Multiquip genuine OEM strainer replacement part.MTR40HF, MTX50HD, MTX60SD, MTX70 HDR, MTX80HDR,
Buy It Now
$12.95 Shipping Condition: New Location: Zephyrhills, United States
Buy It Now
$12.45 Shipping Condition: New Location: Beltsville, United States Multiquip Mikasa. Air Filter. Part Numbers. Make sure the part numbers are correct, certain parts are serial number specific.
Buy It Now
$12.95 Shipping Condition: New Location: Pompano Beach, United States Multiquip-Mikasa 366910030 Roller Assembly.
Buy It Now
$75.61 Shipping Condition: Used Location: Southaven, United States Make offer for part that you are wanting with picture number. if you don’t see what you need send me aMessage I have more than what is pictured. Throttle ... morecable is available but not pictured will update pictures asap. the flowing list is items already sold and are no longer available. Everything in pictures is still available EngineBellow ClutchGas tank Rod Gear cover Gear box
Buy It Now
$17.80 Shipping Condition: New Location: Beltsville, United States Part Numbers - 368217750.
Buy It Now
Free Shipping Condition: New Location: United States For Honda GX100UKRBF. Carburetor Model: HDA278 / Gx100Ukrbf. The Photos are taken from the actual item.
Buy It Now
$12.95 Shipping Condition: New Location: Pompano Beach, United States Replaces Multiquip-Mikasa 943020020. Multiquip-Mikasa MTR60, MTR60H, MT74, MT85HS OEM clutch assembly. This MT clutch assembly has the following specification(s) ... moreMultiquip-Mikasa genuine OEM part. Replaces Multiquip-Mikasa 301421363.
Buy It Now
$25.00 Shipping Condition: New Location: Pompano Beach, United States Multiquip-Mikasa 362910150. Multiquip-Mikasa OEM Wood Shoe Kit. This Wood Shoe Kit has the following specification(s) Factory genuine OEM Multiquip-Mikasa ... morepart.
Buy It Now
$12.95 Shipping Condition: New Location: Pompano Beach, United States Part number 939010230. Fits Multiquip-Mikasa MVC88 only. Includes four (4) shockmounts. Replacing one shockmount can cause stress and fatigue to the remaining ... morethree shockmounts.
Buy It Now
$12.95 Shipping Condition: New Location: Pompano Beach, United States Replaces Multiquip-Mikasa 505985. Multiquip-Mikasa AR13 Shockmount. This Shockmount has the following specification(s) (6) Shock mounts.
Buy It Now
Free Shipping Condition: New Location: Richmond, United States High Quality Pull Starter For One Pull Starter (1).
Buy It Now
$25.00 Shipping Condition: New Location: Pompano Beach, United States ReplacesMultiquip-Mikasa 8511S (New Part Number). DHS Quality Parts 11" Wood Shoe Kit. This 11" Wood Shoe Kit has the following specification(s) Replaces ... moreMultiquip-Mikasa 366910020 (Old Part Number).
Buy It Now
$12.95 Shipping Condition: New Location: Pompano Beach, United States Multiquip-Mikasa 366217340. Multiquip-Mikasa Upper Air Filter Cover. This Upper Air Filter Cover has the following specification(s).
Buy It Now
$9.95 Shipping Condition: New Location: Poplar Bluff, United States This is not an OEM Honda or Mikasa part.
Buy It Now
$12.95 Shipping Condition: New Location: Pompano Beach, United States Multiquip-Mikasa 070100332. Fits Multiquip-Mikasa MVC88 compactors. Multiquip-Mikasa OEM Drive Belt. This OEM Drive Belt has the following specification(s).
Buy It Now
$12.95 Shipping Condition: New Location: Zephyrhills, United States Multiquip genuine OEM BEARING SEALEDSuitable for the following applications: EM70P/SEM70SLFEM900SDEM90P/SEM90SLFWM63E/WM63H5/WM63H8WM70PLF WM70S/PWM70SLFWM90PLF ... moreWM90S/PWM90SLFWM63SLF
Buy It Now
$12.95 Shipping Condition: New Location: Pompano Beach, United States Multiquip-Mikasa 366010080. Multiquip-Mikasa 366010070. Multiquip-Mikasa Air Filter Set. This Air Filter Set has the following specification(s).
Buy It Now
$12.95 Shipping Condition: New Location: Pompano Beach, United States Multiquip-Mikasa 366900032. Multiquip-Mikasa OEM Throttle Lever and Wire Assembly. This throttle lever and wire assembly has the following specifcation(s).
Buy It Now
$12.95 Shipping Condition: New Location: Zephyrhills, United States Used in: MTX50, MTX60, MTX70, MTX80. Multiquip 366350580 Filter Holder.
Buy It Now
$12.95 Shipping Condition: New Location: Zephyrhills, United States Used in: MTX50, MTX60 MTX70 MTX80. Multiquip genuine OEM.
Buy It Now
$12.95 Shipping Condition: New Location: Zephyrhills, United States Multiquip OEM parts. 20104-002 Seal Shaft Urethane.
Buy It Now
$12.95 Shipping Condition: New Location: Zephyrhills, United States Multiquip genuine OEM Fuel Cap replacement part.Fits in the following models MTX50, MTX60, MTX70, MTX80, MTX90
Buy It Now
$9.58 Shipping Condition: New Location: Wheatland, United States Introducing the Multiquip Mikasa Clutch for your MTR-60 and MT-60H rammers. This heavy-duty clutch is designed to fit perfectly with your equipment, ensuring ... moreefficient and reliable operation. Crafted with the highest quality materials, this clutch is built to last and withstand even the toughest working conditions. Trust in the Mikasa brand for top-notch performance and durability. Get the most out of your rammers with the Multiquip Mikasa Clutch.
Buy It Now
$15.45 Shipping Condition: New Location: Beltsville, United States MVC64E MVC64EW MVC64H MVC64HW MVC64VH MVC64CHW MVC70E MVC70EW MVC70H MVC80VH MVC80VHW MVC82VH MVC82VHW MVC88GE MVC88GEW MVC88GH MVC88GHW Plate Compactors ... moreby Multiquip Mikasa. Multiquip Mikasa. Fits Model.
Buy It Now
$10.58 Shipping Condition: New Location: Yuba City, United States Multiquip-Mikasa Replace OEM - MTR60, MTR60H, MT74, MT85HS clutch assembly - HEAVY DUTY. - Multiquip-Mikasa 361463840.
Buy It Now
$12.95 Shipping Condition: New Location: Zephyrhills, United States Fits EM120, EM70, EM90, PRO12, PRO20, C30HD, MC12, MC44, MC64, MC94, AR13, WM45, WM63, WM70, WM90.
Buy It Now
Free Shipping Condition: New Location: Poplar Bluff, United States OEM part # 54210129.
Buy It Now
$12.95 Shipping Condition: New Location: Pompano Beach, United States Part number 939010254. Multiquip MVC64, MVC70, MVC80, MVC82 genuine OEM shockmount. This factory genuine shockmount has the following specification(s) ... moreFactory genuine Multiquip part. MULTIQUIP PRICING AND AVAILABILITY.
Buy It Now
$9.95 Shipping Condition: New Location: Beltsville, United States Multiquip Mikasa. Clutch Assembly. Make sure the part numbers are correct, certain parts are serial number specific.
Buy It Now
$13.60 Shipping Condition: New Location: Beltsville, United States Multiquip Mikasa. Shock Mount with Pin. Make sure the part numbers are correct, certain parts are serial number specific. Part Numbers.
Buy It Now
$12.95 Shipping Condition: New Location: Zephyrhills, United States Multiquip genuine OEM Oil seal, MVC88VTH TC-35488Suitable for the following applications: MVC88VTH MVC90 Plate Compactors
Buy It Now
$17.80 Shipping Condition: New Location: Beltsville, United States MVC82VH MVC82VHW Plate Tamper by Multiquip Mikasa. Multiquip Mikasa. Carburetor Assembly.
Buy It Now
$12.95 Shipping Condition: New Location: Zephyrhills, United States Multiquip genuine OEM parts.
Buy It Now
$9.95 Shipping Condition: New Location: Poplar Bluff, United States Multiquip Mikasa Jumping Jack Rammer Tamper Carburetor for Honda GX100 without primer bulb- Fits MTX60 and MTX70 rammers. OEM part# 16100z4es15 Please ... moremake sure the carburetor on your Honda powered Mikasa rammer does NOT have a primer bulb Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Buy It Now
Free Shipping Condition: New Location: Poplar Bluff, United States OEM part # 366350460. Multiquip Mikasa MTX60, MTX 70, MTX 80, MTX 90 Fuel Tank Cap.
Buy It Now
Free Shipping Condition: New Location: Reno, United States This genuine Multiquip OEM 366345280 filter holder is specially designed for Mikasa manual tampers such as MTX50, MTX60, MTX70, MTX80, and MTX90. It is ... morean essential component that ensures proper filtration of air and fuel to maintain optimal performance.
Buy It Now
$12.95 Shipping Condition: New Location: Pompano Beach, United States Multiquip, (which may include Essick, Mikasa, MQ Power, STOW, RAMMAX and Whiteman), Carb Assy. (Had 201C) Gx100Ukrbf. This factory genuine Carb Assy. ... more(Had 201C) Gx100Ukrbf has the following specification(s).
Buy It Now
$14.95 Shipping Condition: New Location: Pompano Beach, United States Fits Multiquip-Mikasa MVC88, MVC88GH, MVC88GHW, MVC88VGE, and MVCV88GEW plate compactors. Multiquip-Mikasa 416338990, 4163-38990. Multiquip-Mikasa Complete ... moreClutch Assembly. This Complete Clutch Assembly has the following specification(s).
|
|
|
|
Mikasa Plate Compactor 200 lb MVC-88GHW
LIKE NEW ONLY 20 HOURS. EXCELLENT CONDITION. PICK UP ONLY. CHATSWORTH.
|
|
|
MIKASA MULTIQUIP MT76D COMPACTOR, JUMPING JACK, WACKER, RAMMER CLEAN! N/R
Diesel MQ Mikasa MD76D Jumping Jack Compactor. This compactor is in excellent condit ion and ready to go to work and is covered by our 14-day money back less shipping guarantee. Shipping should be in the $250 range or less to mo st continental US locations. Contact us for a more precise shipping quotation giving your postal code. Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 This can be picked up at our Longmont Colorado warehouse at no shipping cost. Or we can certainly arrange shipping as the buyer request and at buyer's expense. We have received more than 2500 positive feedbacks! In many years of doing business on Ebay. Only 1 customer could not be pleased, and that was more than 5 years ago. So, please bid with the confidence that what you see is what you will ... morereceive! Please read" About this sale. below. Thank you for looking. Good luck and happy bidding! About this sale. This item is described to the best of our knowledge. But please keep in mind that it is used with all that being"used" implies* Please remember that all bids are binding! Your bid is your commitment to pay. If you are new to ebay. Please read the Ebay User Agreement before bidding. Negative feedback bidders: please ask before bidding or your bid may be removed. Please ask questions BEFORE you bid. We want you to be happy with your purchase! Please do not make assumptions about the item. If you have any questions please ask BEFORE bidding. We prefer Paypal in accordance with Ebay's preferences. I will leave feedback when I know you have received your item and are satisfied with your purchase. If you have any issues. Please email me and I will remedy the problem. WHO WE ARE: We are USILG. A distributor for used and new equipment. We are located at 10765 Turner Blvd in Longmont Colorado and our voice telephone is 720-979-7500. We are open Monday through Friday from 9 AM to 6 PM MST We handle equipment in the following categories: Medical Construct
|
|
|
MIKASA MULTIQUIP MTR-40F TAMPER RAMMER JUMPING JACK WORKS GREAT 4 CYCLE. NO MIX
MIKASA MULTIQUIP MTR-40F TAMPER RAMMER JUMPING JACK WORKS GREAT 4 CYCLE. NO MIX MIKASA MULTIQUIP MTR-40F TAMPER RAMMER JUMPING JACK WORKS GREAT. 4 CYCLE MOTOR. NO OIL MIXING. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE ... moreLOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400?265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13e041142c6-0xfc-
|
|
|
MIKASA MVC-88VGH VIBRATORY PLATE COMPACTOR
YOU ARE BIDDING ON A MIKASA MVC-88VGH VIBRATORY PLATE COMPACTOR IN EXCELLENT CONDITIONS WORK GREAT. Technical data Powered by a 5.5-HP Honda GX-160 gasoline engine Centrifugal Force 3450 lbf. 15.35 kN Optional 2.875 gallon water tank Engine oil shutdown Max Forward Speed Per Min. 72 ft(22 m) L 41.75" W 19.75" Operating Weight 218 lb(99 kg) Exciter speed 6.000 rpm PLEASE SEND YOUR ZIPCODE FOR SHIPPING CALCULATION AND IF IT IS BUSINESS OR RESIDENTIAL AREA PICK UP IS OK WE ARE LOCATED IN SOUTH GATE CA. LOS ANGELES WE CAN DELIVER 500 MILES $1.80 PER MILE WHAT YOU SEE ON PICTURES IS WHAT YOU GET. SE HABLA ESPAÑOL CALIFORNIA RESIDENTS PAY TAX THANKS FOR LOOKING GOOD LUCK
|
|
|
MIKASA MULTIQUIP MVH-502 MVH-502DSB2 DIESEL FORWARD REVERSE COMPACTOR TAMPER A++
Up for sale is a 2009 MULTIQUIP MIKASA MVH-502 DIESEL forward and reverse compactor. This is a great running and seriously powerful packing machine. Retail is $15.995 on this machine. $275 shipping to the lower 48 only. Machine weighs approx 1200lb just had a fresh service. Electric start runs and operated just like it should. Ready to go to work( I just compacted my 1 1/4" process driveway it literally felt as hard as a concrete slab when i was done. this machine packs harder than any roller i ever seen. If you want to have the best base possible this is for you. Why pay $16,000 for one when you can pay 1/2 price? Deposit must be made within 24 hours of $500 and certified bank check required for remaining balance(I prefer certified bank check or cash in person) I will consider Pay pal but will not guarantee I will accept that as form ... moreof payment. I also have this machine listed locally so if you are serious about buying the best hitting compactor money can buy contact me and we will set this up. Thank you and please see my other items up for sale as well as 1200+ positive feed backs and rest assuredly you are dealing with a trustworthy reliable seller. 0 feedback buyers welcome but* YOU MUST CONTACT ME FIRST OR I WILL CANCEL YOUR PURCHASE* Shipping and palletizing is only $275 to the lower 48 only. You must also provide me with a commercial address and have a fork lift or loading dock to unload it. Thank you Mike East Coast Hardscapes Posted with
|
|
|
Multiquip Mikasa Plate Compactor 200 lb MVC-88GHW
This Compactor was bought and used for one job. It has less than 25 hours on it. Starts first pull and runs awesome. To buy this new costs $2100.00. $500.00 deposit due through paypal upon winning auction. The rest is due in cash upon pick up.
|
|
|
Mikasa MVH 306 GH Vibratory Reversible Compactor Honda
You are viewing a Mikasa MVH 306 GH Vibratory Reversible Plate Compactor 9hp Honda. This unit is powered by a 9 hp honda gas engine. This is a heavy duty. Top of the line commercial unit. WHAT YOU SEE IS WHAT YOU GET! Check out The Pics! This unit sell for $10.200.00 New. The unit is in working condition. Was not used all that much. Starts 1 or 2 pulls. Works as it should. The weight is about 800 lbs. Item is located in Fort Myers FL 33901- buyer is responsible for shipping charges- I can help arrange shipping if needed. Estimated cost to ship 1300 miles is $173.00 For 650 miles $96.00. Please add $40.00 for the cost of building a crate for shipping. Please Note: This is not an auction. It’s a Buy IT Know! I feel we placed a fair reasonable realistic price on this unit. Should U have any? Please call me for a discussion. We sell quality equipment; ... moreWe tell it the way it is. We take close up pics. Post at least 10 pics, and let the buyer enlarge the pic. Reason we have nothing to hide, we sell quality! Not afraid to show the buyer what he is buying. No sales tax charge on items shipped out of the state of FL. From time to time we are on the road buying Equipment. We have 100's of items Listed on EBay for sale. We never know when the item will sell. Please be patient with shipping time. Item is located in Fort Myers FL 33901- buyer is responsible for shipping charges- I can arrange shipping if needed. Someone is going to get a great deal! I invite you to visit our 20.000 sq ft commercial warehouse facility on 2.5 acres, that we own, to checkout this unit and others we have for sale. We do not sell equipment from the backyard our home. I want the buyer to be happy with their purchases- please call me with any questions at 239-246-3201 11 am to 10 pm est. or contact me to view the item. Please check my other listing- more turf equipment is available- I list new items every week- at a GREAT PRICE! Summary of My Selling Policies Payment PayPal We will take Business. Personal Checks Wire Transfers. Ho
|
|
|
MIKASA MT-74FA JUMPING JACK COMPACTOR 3.5HP 3,000 LBS IMPACT FORCE COMPACTOR
MIKASA JUMPING JACK COMPACTOR MAKE MIKASA MODEL MT-74FA SERIAL N-2683 178 LBS 3.5 PS 3.100 LBS IMPACT FORCE 3.5HP PLEASE CALL AARON AT 540-599-0592 WITH ANY QUESTIONS OR IF YOU NEED A SHIPPING QUOTE
|
|
|
Multiquip Mikasa compactor rammer MT 65 HA
One jumping jack soil compactor by Multquip/Mikasa. Model MT-65HA with 4 cycle Honda motor, GX 100. This unit starts right up. Runs real smooth, non smoking, meets 2008 California epa specs Output 2.2KW at 3.0 PS. Net weight 150 lbs, 11" x 13" shoe For additional information see www.multiquip.com Pick up ok. Ship weight 180 lbs
|
|
|
MQ MIKASA HATZ DIESEL POWERED PLATE COMPACTOR REVERSIBLE MODEL MVH-502
HI, UP FOR SALE IS A HEAVY DUTY MIKASA MODEL MVH-502 HATZ DIESEL. REVERSIBLE PLATE COMPACTOR, THIS UNIT FEATURES AN ELECTRIC START SYSTEM. THIS UNIT HAS BEEN TESTED TO BE IN GOOD WORKING CONDITION, THANKS FRO LOOKING Check out my!Be sure to add me to your!
|
|
|
Multiquip Mikasa Plate Compactor machine*
MVC-88GHW Multiquip Mikasa Plate Compactor machine YOU ARE BIDDING ON A Multiquip MVC-88VGHW IN GREAT WORKING CONDITIONS it comes as shown in the pictures. Winner pay for shipping and handle $250.00 just to the lower 48 states.USA) if you are located in ALASKA, HAWAII, CANADA OR PUERTO RICO please contact me for a shipping cost. thanks and good luck. WHAT YOU SEE ITS WHAT YOU GET! THANKS FOR LOOKING GOOD LUCK SE HABLA ESPAÑOL Multiquip MVC88VGH 19.7" x 20.7" Mikasa Plate Compactor Easy to use. Easy to transport, the MVC88 is one of the newest and most technically advanced compactors on the market. The anti-vibration handle design reduces vibration up to 50% compared to other plate compactors. Protective engine guard Multiquip forward plate compactors have always used vibrator(eccentric) housings that are bolted onto the forward ... moreend of the plate. This allows service access without having to strip down the entire plate and greatly reduces down time. Sealed belt cover keeps dirt and rocks out of the belt Convenient oil drain for engine oil Cog-tooth belt drive for longer life Self-cleaning plate design minimizes dirt and rock build-up Four lifting handles so plate can be lifted from the side Technical data Powered by a 5.5-HP Honda GX-160(MVC88VGH) gasoline engine Centrifugal Force 3450 lbf. 15.35 kN Optional 2.875 gallon water tank Engine oil shutdown Max Forward Speed Per Min. 72 ft(22 m) L 41.75" W 19.75" Operating Weight 218 lb(99 kg) Exciter speed 6.000 rpm Posted with
|
|
|
MIKASA JUMPING JACK RAMMER #MT-74F
Hello! Up for sale is this MIKASA JUMPING JACK RAMMER#MTX-70. The Mikasa MT-74F tamping rammer is a powerful compacting tool capable of applying a tremendous force in consecutive impacts to a soil surface. Its applications include soil compacting for road. Embankments and reservoirs as well as back filling for gas pipelines. Water pipelines and cable installation work. The impact force of the MT-74F levels and uniformly compacts voids between soil particles to increase dry density. Circular motion is converted to create impact force. The MT-74F tamping rammer develops a powerful compacting force at the foot of the rammer. To maintain optimum performance. Properoperation and service are essential. M ultiquip Mikasa Series Model MT-74F Tamping Rammer Operating Manual; Revision#12[11/08/07] www.multi quip.com) Operating Weight: 163 lbs. Impact ... moreForce(MAX) 14.9 kN(1.520 kgf. Blows/Minute: 680 Impact Force: 3.100 lbs.blow(1,400 kg.blow) Engine Type: ROBIN EH12-2D46051 Air cooled 4-stroke Gasoline Engine(4 hp. Output) Max Output: 2.6 kW; 3.5 P.S Despite some very mi nor cosmetic wear as a resul t of use. This ju m ping jack ramme r is still in excellent. Working condition and ready to be used once again. Thanks for looking! Check out my! Be sure to add me to your!
|
|
|
MIKASA PLATE COMPACTOR #MVC-77 [HONDA GX160 MOTOR]
Hello! Up for sale is this MIKASA PLATE COMPACTOR#MVC-77. The compactor uses a HONDA GX160 MOTOR[5.5 HP] COMPACTOR SPECIFICATIONS: Centrifugal Force: 3350 lbs. 1520 kg) 5800 Vibrations/min Traveling Speed: 82 feet/min Plate Size: 17" x 22" Maximum Area of Compaction: 6970 sq.ft/h Despite the minor surface wear as a result of prior use. This plate compactor is still in excellent running condition and ready to be used once again. Thanks for looking! Check out my! Be sure to add me to your!
|
|
|
Mikasa Tamping Rammer MTR-80L
You are bidding for a used Mikasa Tamping Rammer MTR-80L Gas Powered. In good working condition. Sold as is. Only local pick up
|
|
|
Mikasa MTX-70 Dirt Compactor Tamper Rammer Jumping Jack Only 87hrs Used
ITEM: Mikasa Dirt Compactor Only 87hrs Used*Local Pickup Only MODEL: MTX-70 CONDITION: Pre-owned The compactor is in fine working condition. It shows some normal dirt. Scratches and scrapes. Nothing extreme or out of the ordinary with those. The hour meter shows"87" Local Pickup Only. Item Will Not Be Shipped*All auctions run their full course. There are no buy it now prices with our auction listings. TOP CASH PAWN AND JEWELRY-Our Ebay store is seperate from our pawnshops. All questions regarding any items listing on Ebay need to be emailed directly through the Ebay messaging. Please allow up to 24-hours for email response. PAYMENTS-All sales within Texas will require sales tax. We accept Paypal only. LOCAL PICKUPS-Pickup time and date must be scheduled and approved with a 24-hour notice prior to coming in. Local pickup is available ... moreMonday-Friday from 9am to 5pm. Sales tax will apply. SHIPPING-LOCAL PICKUP ONLY. REFUNDS-All refunds are subject to approval. Shipping charges are non-refundable. Item returned must be the exact same sold. All serial numbers are recorded along with other identification methods. Buyers must contact us via email with 14-days of auction close date for return eligibility. Full amount may not be refunded for items that are damaged during return due to poor packing of the returned item. Powered by
|
|
|
2008 Multiquip Mikasa MT-76D2 Walk-Behind Diesel Jumping Jack Compactor Tamper
SKU: SB195936 A: 0015000000c9x1n O: 0065000000Mj3Nc PA: 0015000000VvVTW View Photo Gallery. Calculate Shipping. Location: Richmond. CA 94801 Item Description. This is a no reserve auction for a 2008 Multiquip MT76D2 Plate Tamper Jumping Jack in good operating condition. This unit is being dispersed as part of a standard rental fleet rotation package from Sunbelt. One of the largest rental companies in the United States. It was regularly serviced and maintained. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our for construction machinery. Fleet vehicles and heavy equipment. View our for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Multiquip Model: ... moreMT76D2 Year: 2008 Serial: R5693 Shipping Weight: 250 lbs Shipping Dimensions: 42"L) x 48"W) x 22"H) Features: Air cooled 4 stroke diesel engine Throttle controls engine speed. Start/stop functions and fuel shut-off Laminated wood with tempered steel plate for superior shock absorption Recoil starter Automatic centrifugal clutch Specifications: Engine: Make: Yanmar Model: L48V6LF9M3ERSCE Fuel: Diesel Blows Per Min: Up to 700 Impact Force: 3600 lbf Shoe Jump Height: 3.1 in Shoe Dimensions: 11” Resources: For more information on this unit including full specifications. Visit the Condition: Former rental unit in good overall operating condition Engine starts and runs well Unit is in average overall cosmetic condition with some dents on the fuel tank and wear to the plate– see photos See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take prior
|
|
|
Multiquip Mikasa MTX-70 Rammer Jumping Jack MQ
You are looking at a Multiquip Mikasa MTX-70 Rammer. It is used. But in excellent working condition. It includes everything shown in the pictures. As shown in the pictures. 800x600 Shipping will be $295 which will be added to the purchase price. Shipping rate applies only to the Lower 48 States. Item is large and needs to be shipped by freight. Multiquip's Mikasa MTX70 is our most popular selling rammer. This middle-weight compactor is ideal for confined area compaction and is exceptionally well balanced. Patent pending clutch incorporates self-cleaning drum that lowers maintenance and increases service life Throttle controls engine speed. Start/stop functions and fuel shut-off Digital tachometer and hourmeter Cyclone air filter triples the amount of clean air to the engine. Lengthening component life and reducing maintenance Anti-vibration ... moresystem(AVS) decreases vibration to the operator to reduce fatigue, FEATURES and SPECIFICATIONS are taken from manufacturer sites and should be subject to verification* Shipping rates applies to the Lower 48 states only. All sales are sold as is. Please ask all questions before you bid. Sorry. There are no local pick ups. ITEMS CAN NOT BE SHIPPED TO P.O. BOXES. Items are shipped out on Mondays and Thursdays. Please note; if you are paying with Paypal; I will only ship to Paypal CONFIRMED addresses. If you do not have a confirmed Paypal account. Please pay with one of the other methods listed. Return Policy: Buyer must return item within 14 days after receiving the item. We'll provide a full refund minus the cost of shipping. Items must be returned in the same original condition and unused. Buyer pays for return shipping. Be sure to add me to your favorites list! Please check out my other items! Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13e358b451c-0xee-
|
|
|
Multiquip Mikasa MTX-70 Dirt Compactor Tamper Rammer Jumping Jack Wacker
Mikasa MTX-70 Dirt Compactor Used with only 35 hours in excellent working condition. SHIPPING 225.00 Tamper will be shipped with ODFL and will need to be picked up at the nearest service center to you unless you have a business address with loading dock or fork lift. To find the nearest service center go to the ODFL web site and enter your zip code or send me a email and I can look it up for you. MTX70HD Specifications Unit Specifications Engine Specifications Blows Per Minute. 695. Engine Make/ Model. Honda GX100. Impact Force. 3350 lbs. Start Method. Recoil. Fuel Tank Capacity. 3.2 qt. Engine Power. 2.8Hp. Travel Speed per minute. 55.8 ft. Engine RPM. 4100. Max Area Capacity per hour. 2183 sq. ft. Fuel Type. Gasoline. Fuel Consumption per hour. 0.221 gallons. MTX70HD Dimensions Weight Overall Length. 31.0 Inches. Operating Weight. 165 lbs. ... moreOverall Width. 13.8 Inches. Shipping Weight. 195 lbs. Overall Height. 39.4 Inches. Compaction Shoe Size Width. 13.4 Inches. Length. 11.2 Inches. Cyclonic air cleaners that capture 98% of airborne dust particles. Long-lasting laminated wood and steel shoe. Low vibration handles for operator comfort. Combination hour meter/ tachometer Durable guards to protect the engine from damage. Redesigned fuel tank to meet EPA standards for evaporative emmissions.
|
|
|
2009 MIKASA MULTIQUIP MTR-40F NARROW FOOT JUMPING JACK COMPACTOR TAMPER
MIKASA MTR-40F JUMPING JACK COMPACTOR Up for auction is a 2009 mikasa MTR-40F compactor. This compactor is in good used condition and is ready to go to work! It is powered by a Robin 3.0 HP 4 cycle engine that starts right up and runs great! It has Fresh oil and spark plug. It is a Model# MTR-40F. Serial#T3192. This compactor is expensive new, here is your chance to save! Please check with the manufacturer for complete specs at www.mikasas.com This is a" buyer to pay exact freight" auction. Also the machine can be shipped via Big Red Brokerage or Vitran Express. Just give me your zip code and I will run a quote for you. All of my shipping quotes are to a buisness with unloading capabilities. If to be shipped to a Residence please specify. Please contact us for available payment methods. Payment is due within 3 days of the end of ... moreauction. If shipping out of the country,buyer is responsible for any fees or taxes there country may impose. Colorado residents will pay an 7.1% tax. After payment is recieved I will coordinate shipping within 3-5 days. I do my best to accurately describe the items and test the items to the best of my ability. We staff a mechanic and are very knowledgeable about our equipment. However we are not experts on every single piece of equipment I sell and do not operate them all day every day. Please keep in mind you are buying used equipment, not new or refurbished unless stated in the description. Used equipment will have dings, dents, scratches in the paint, minor cracks and chips. Feedback will be left after Feedback has been recieved. If you have a question or concern, please ask before bidding. If you have an issue with the item after receiving it please contact me before leaving feedback. I will work to resolve the issue with in reason. I want happy customers and repeat buyers. Thank you for your bid! On Feb-10-12 at 17:27:54 PST. Seller added the following information:
|
|
|
mikasa mt-65h ground packer
mikasa mt-65h ground packer The MT-65HA rammer has improved and vibrations have been reduced. Features extra heavy-duty shock absorbers and precision balance to ensure operator comfort and extended unit life. The rammer is powered by Honda’s new vertical cylinder 4-cycle GX-100 engine and is fit for all basic rammer applications. Especially those where noise is a concern. The diaphragm carburetor allows the rammer to be laid down in any position without fuel spillage. The MT-65HA is durable, easy to use and portable making it the perfect choice for contractors and rental stores. Multiquip has built a reputation on manufacturing the hardest-hitting. Lowest-maintenance rammers in the business. High performance and unparalleled reliability have made Multiquip the No. 1 choice for rammers in the equipment rental industry and the standard among ... morecontractors everywhere. Multiquip's four-cycle rammer is designed for high efficiency with lower exhaust emissions, less noise and better fuel economy than standard two-cycle rammers. No need for mixed fuel! The engine is lubricated through the crankcase instead of through the fuel, so no oil is burned in the cylinder, reducing carbon buildup and minimizing gumming problems. General Information: height 41.9in. Width 14.6in. Length 29.1in. Shoe size 11.0in x 13.0in. Blows per min 590 to 695. Stroke 3.4in. Travel Speed 39ft per min. Impact Force 2450- 2900 lbs per blow. Clutch Automatic Centrifugal. Fuel Tank 2.2 gt. Max area of compaction 2145 sq. ft. per hour. Operating weight 146 lbs. NEW PRICE $2600.00 Bid It And Get It! Buyers Note: These are used item in great working condition. Please look at all photos. When available. These item are sold as is. Shipping& Handling: Allow up to 15 days for delivery. NO FREE SHIPPING) Shipping at buyers expense. Details and options can be obtained by contacting Royal Pawn at 770.246.0053. Royal Pawn will not ship outside the 48 States. Royal Pawn Bargains Building Equipment: Trailers. Lifts, Cats& More! Industrial Tools: Sprayer
|
|
|
WACKER MQ MIKASA COMPACTOR JUMPING JACK RAMMER MTX-60 HONDA GX ENGINE CLEAN!
welcome to 0728darcel description up for auction is a use mikasa mtx-60 jumping jack unit has not been used commercially look at the pictures they are of the actual item you will receive everything as pictured excellent opportunity dont miss out! no reserve shipping this item will ship via freight to business or terminal address at end of auction please provide business name address and phone number i will ship strapped to a pallet and insured our promise we promise to deliver what we advertise. Our pictures will be detailed and of actual unit being sold/auctioned all items are shipped within 1-3 days of payment receipt items 50lbs or less will ship the next business day or the same business day depending on time item is payed for fed ex picks up daily at 3pm once item is received please inspect the item and make sure it is as advertised ... moreif for some reason it is not please contact us immediately we will do our best to resolve all issues.if item is as advertised and you are happy with this transaction please take the time to leave us your feedback.it is of great importance to us! thanks and have a blessed day! Patent pending clutch incorporates self-cleaning drum that lowers maintenance and increases service life, Throttle controls engine speed. Start/stop functions and fuel shut-off, Digital tachometer and hourmeter, Cyclone air filter triples the amount of clean air to the engine. Lengthening component life and reducing maintenance, Anti-vibration system(AVS) decreases vibration to the operator to reduce fatigue UNIT SPECIFICATIONS, Blows Per Min. 695, Impact Force, 3060 lb, 1388 kg, Fuel Tank Capacity, 3.2 qt, 3.0 L, Travel Speed Per Min. 55.8 ft, 17 m, Max Area Capacity Per Hour, 2183 sq. ft, 203 sq. m, Fuel Consumption Per Hour, 0.147 gal, 0.56 L, DIMENSIONS& WEIGHTS, Overall Length, 28.1 in, 713 mm, Overall Width, 13.8 in, 350 mm, Overall Height, 38.8 in, 985 mm, Shipping Dimensions 30 x 15 x 43 in 760 x 400 x 1100 mm, Operating Weight, 141 lb, 64 kg, Shipping Weight, 172 lb, 78 kg, Engine Specifica
|
|
|
2004 MIKASA MVH-502 DSB DIESEL REVERSIBLE PLATE COMPACTOR
2004 MIKASA MVH-502 DSB DIESEL REVERSIBLE PLATE COMPACTOR SERIAL-M 1390 THIS IS A NICE REVERSIBLE PLATE COMPACTOR. THIS IS THE BIGGEST MIKASA MAKES. IT IS KEY START AND STARTS RIGHT UP AND RUNS GREAT. THIS UNIT IS A BUYER TO PAY EXACT FREIGHT AUCTION. THERE IS A $25 PALLET FEE FOR THIS ITEM! ALL emails received after 5pm MST will be answered the next business day. Therefore after 5pm on friday will be answered monday morning. No auctions will close on the weekends, but if you would like an answer about an auction please email us ahead of time.Thanks! Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. Most of the items sold on this page are surplus items from government auctions or bankruptcy sales. If the description does not say"New" ... morethen you are to assume it is a preowned item. We try to power up every item. But much of the time do not have the means to test items, therefore unless otherwise stated items are sold"as-is" You are welcome to email any questions and if we have the capability to answer we will. We are an ebay business and are committed to excellence in service and fairness, if we are aware of something wrong it will be stated. PAYMENT& SHIPPING Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. 1. Unless arrangements prior to auction close are made. All items will be shipped FED EX Ground Insured Delivery in the 48 CONTIGUOUS US STATES ONLY(UNLESS WORLDWIDE SHIPPING IS STATED IN AUCTION, THEN IT IS EXACT SHIPPING COSTS) 2. WE RESERVE THE RIGHT TO PULL ANY AUCTION AT ANY TIME! 3. Larger FREIGHT orders(pallets) are to be shipped FREIGHT COLLECT. or unless arrangements are discussed prior to shipping with me) at the expense of the buyer, we will assist in packaging/securing the items for shipment. 4. We gladly accept PAYPAL or email me about payment options.
|
|
|
MIKASA MULTIQUIP MVH-306 MVH-306DS2 DIESEL REVERSIBLE PLATE COMPACTOR TAMPER
MIKASA MVH-306 DS2 COMPACTOR Up for auction is a 2006 Mikasa MVH-306DS2 compactor. This compactor is in great used condition and is ready to go to work! It is powered by a Yanmar diesel engine that starts right up and runs great! it is a model# MVH-306DS2. Serial# P 402 It has electric start. Fresh oil, new air filter, oil filter. This compactor is expensive new, here is your chance to save! Please check with the manufacturer for complete specs at www.mikasas.com This is a" buyer to pay exact freight" auction. Also the machine can be shipped via Interide Logistics or Vitran Express. Just give me your zip code and I will run a quote for you. All of my shipping quotes are to a buisness with unloading capabilities. If to be shipped to a Residence or you need a liftgate truck please specify. Please contact us for available payment methods. ... morePayment is due within 3 days of the end of auction. If shipping out of the country, buyer is responsible for any fees or taxes there country may impose. Colorado residents will pay a 7.1% tax. After payment is recieved I will coordinate shipping within 1-3 days. I do my best to accurately describe the items and test the items to the best of my ability. We staff a mechanic and are very knowledgeable. Please keep in mind you are buying used equipment. Not new or refurbished unless stated in the description. Used equipment will have dings, dents, scratches in the paint, minor cracks and chips. Feedback will be left after Feedback has been recieved. If you have a question or concern, please ask before bidding. If you have an issue with the item after receiving it please contact me before leaving feedback. I will work to resolve the issue with in reason. I want happy customers and repeat buyers. Thank you for your bid! On Feb-01-12 at 17:37:40 PST. Seller added the following information:
|
|
|
Mikasa MVC-77 H Walk Behind Vibrating Plate Compactor
description Selling a Mikasa compactor MVC-77H walk behind vibratory plate compactor. Unit is in good working order,stars at firs pull,it shows normal sings of used, shipping to lower 48 states no reserve auction. Please email me for more details. shipping this compactor will ship via Freight to a commercial business or terminal with in two to three days of payments.There will be and additional fee of $90.00 for residential delivery. Shipping cost $299.00 our promise we promise to deliver what we advertise. Our pictures will be detailed and of actual unit being sold/auctioned all items are shipped within 1-3 days of payment receipt items 50lbs or less will ship the next business day or the same business day depending on time item is payed for fed ex picks up daily at 3pm once item is received please inspect the item and make sure it is as ... moreadvertised if for some reason it is not please contact us immediately we will do our best to resolve all issues.if item is as advertised and you are happy with this transaction please take the time to leave us your feedback.it is of great importance to us! thanks and have a blessed day! Posted with
|
|
|
MIKASA MVH-406 YANMAR DIESEL ENGINE REVERSIBLE VIBRATORY PLATE COMPACTOR WACKER
UP FOR AUCTION IS A USED This Mikasa Plate Compactor Is Used But Still in Mint WORKING Conditions. It Comes Yanmar 10hp Diesel Engine. Description From The Manufacturer Perfect for difficult job sites. This model can be backed out of a trench while still compacting. The MVH-406 series features a unique hydraulic reversing mechanism that eliminates old-fashioned linkage adjustments. This plate is powered by your option of a 13-horsepower Honda gasoline engine of a Yanmar 10hp diesel engine. Either way. The plate produces 12,400 pounds of compaction force. Standard plate size is 22 x 35 inches. but the compactor comes complete with extension plates that attach to the base plate adding another 6 inches to the working width. Multiquip Reversible plate compactor incorporate a unique hydraulic reversing mechanism. Eliminating old-fashioned linkage ... moreadjustments. There are no complicated mechanical drive shafts or cables to create problems, thus greatly reducing service time and expense. It is perfect for difficult jobsite conditions– can be backed out of a trench while still compacting. Bid With Confidence. If You Do Not Get What Is Listed/Pictured We Will Refund You 100% of your Money Including Both Ways Shipping Charges. Thanks& Good Luck NO RESERVE ON THIS ITEM. SORRY! NO LOCAL PICK UPS SHIPPING AND HANDLING FOR THIS ITEM HEAVY UNIT ANYWHERE IN THE LOWER 48 CONTINENTAL STATES IN THE USA WILL BE $ 349.00 THANKS AND PLEASE TAKE A LOOK AT ALL MY OTHER ITEM.
|
|
|
(2) jumping jack plate compactor trench roller Wacker & Mikasa multiquip weber
I have for sale a mikasa and wacker jumping jack compactor lot. These were purchased at a construction company liquidation auction. Both machines need work. The mikasa seems to be in worse shape. From the looks of the mikasa I would say it was partially ran over or backed onto by probably a backhoe. The motor case seems to be fine but from what I see it will need* muffler* air box and filter* cage straightened and welded* rubber shock boot* that is what I can see damaged may need more i am not sure. The wacker looks to be in pretty complete shape. It looks to me like it will need a" fuel tank petcock* spark plug boot* possibly more. Please see all pics clearly. If you need additional pics or info please contact me. These are sold as is in non working condition. Both will need repairs. You must provide me with a commercial address with ... morefork lift and or loading dock for shipping. Buyer will pay only $100 for both machines shipped to your door step! Again you must provide me with a business address with a loading dock to qualify for $100 shipping. Shipping to residential address will be approx $300-$400 Posted with eBay Mobile Posted with eBay Mobile
|
|
|
MQ MULTIQUIP MIKASA MTX-70 RAMMER / TAMPER / COMPACTOR
MQ MULTIQUIP MIKASA MTX-70 RAMMER/ TAMPER/ COMPACTOR THE TAMPER HAS THE NORMAL SCUFFS FROM USE. BUT STILL LOOKS OK AND IS IN GOOD WORKING CONDITION. IT HAS 149 HOURS ON IT AND HAS A HONDA ENGINE. THIS WILL HAVE TO BE PICKED UP. NO SHIPPING. COMES AS YOU SEE IT PICTURED. FOR ANY ADDITIONAL INFORMATION PLEASE SEND ME A NOTE. THANKS. ARCH Condition: Used andale andalesell. Payment Options: Credit Cards.PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground I will ship to: United States[Weight] 100 lbs. Shipping and Handling: Payment Policy: PayPal: I have been very happy with using PayPal and it is the fastest way to receive an auction payment. For me. PayPal also offers e-Check for customers who wish to pay by check. Sellitall123 This transaction must be completed in 10 days from the close ... moredate. If you do not respond to my emails or I do not hear from you in the 10 day period I will assume that you have changed your mind. As a result I will re-list the item at my expense and I will leave feedback stating the facts of the transaction. I am very easy to work with and understanding. Open communication usually works everything out. Please note that I do not offer second chance offers on my auction items. If you receive any emails concerning a second chance offfer please notify eBay at once. I do not like to sell anything that is a discouraging surprise to the buyer. If you have any questions or problems with an item you purchased from me. Please call or email me at once at 214-398-5230. I will be more than willing to make sure your purchase is a satisfying experience on eBay. I will do whatever it takes to fix any situation. If your item arrives and it has been damaged in shipping: Please notify me at once and I will refund your money and take over the problem immediatley. This applies to insured deliveries. Please leave me positive feedback, if you have trouble with the transaction please write or call me where we can get things on the right track. I do not e
|
|
|
Mikasa MVC 90H Vibratory Walk-Behind Plate Compactor Honda 5.5HP Gas Engine
SKU: COS639929 A: 0015000000GcAPi O: 0065000000Mks8d PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Mikasa MVC 90H Walk Behind Plate Compactor in average operating condition. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our for construction machinery. Fleet vehicles and heavy equipment. View our for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Mikasa Model: MVC 90H Year: Unknown Serial Number: 1598 Transport Weight: approx. 250 lbs Transport Dimensions: 42"L) x 42"W) x 42"H) Features/ Specifications: 19" x 23" Plate Engine: Make: Honda Model: GX160 ... moreHP: 5.5 Fuel: Gasoline Low Oil Alert Condition: Unit in average overall condition Rubber grommets on push bar are showing wear. Engine starts easily and runs well Unit is in average cosmetic condition with normal wear to componets for age and prior use. Unit is being sold in As Is condition. See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource links are provided for informational purposes only, are approximate, and may vary from year to year, model to model and machine to machine. Payment. Shipping and Fees: This item will be shipped on a pallet. There is a minimum charge of $75 for palletizing this item. This fee includes professional palletizing. Banding, wrapping and loading of this item so it is legal and ready for an LTL carrier to
|
|
|
2006 Multiquip Mikasa MT-76D2 Walk Behind Diesel Jumping Jack Compactor Yanmar
SKU: UR929294 A: 0015000000mIwv8 O: 0065000000NK08D PA: 0015000000kLkjs View Photo Gallery. Request Freight Estimate. Location: Phoenix. AZ 85043 Item Description. This is a no reserve auction for a 2006 Multiquip MT76D2 Plate Tamper Jumping Jack in good operating condition. This unit is being dispersed as part of a standard rental fleet rotation package from United Rentals. The largest equipment rental provider in the world. Bid with confidence knowing it has been regularly serviced and maintained. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our for construction machinery. Fleet vehicles and heavy equipment. View our for industrial equipment and tooling. General rental tools, and small equipment. ... moreOverview: Make: Multiquip Model: MT-76D2 Year: 2006 Serial: P4671 Shipping Weight: 250 lbs Shipping Dimensions: 42"L) x 48"W) x 22"H) Features: Throttle controls engine speed. Start/stop functions and fuel shut-off Laminated wood with tempered steel plate for superior shock absorption Recoil starter Automatic centrifugal clutch Specifications: Engine: Make: Yanmar Model: L48V6LF9M3ERSCE Horsepower: 4.4 Fuel: Diesel Blows Per Min: Up to 700 Impact Force: 3600 lbf Shoe Jump Height: 3.1" Shoe Dimensions: 11” Resources: For more information on this unit including full specifications. Visit the manufacturer’s website Condition: Former rental unit in good overall operating condition Engine starts and runs well Unit is in normal cosmetic condition See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepanci
|
|
|
MIKASA MVH-306GH HONDA GX270 ENGINE REVERSIBLE VIBRATORY PLATE COMPACTOR WACKER
UP FOR AUCTION IS A USED MIKASA MVH-306 WITH HONDA GX270 GAS ENGINE REVERSIBLE VIBRATORY PLATE COMPACTOR This Mikasa Plate Compactor Is Used But Still in Mint WORKING Conditions. It Comes HONDA Engine. This compactor is ready to go to work! Diesel engine that starts right up and runs great For More Information On This Unit Please Check With The Manufacturer at Bid With Confidence. If You Do Not Get What Is Listed/Pictured We Will Refund You 100% of your Money Including Both Ways Shipping Charges. Thanks& Good Luck NO RESERVE ON THIS ITEM. SORRY! NO LOCAL PICK UPS SHIPPING AND HANDLING FOR THIS ITEM HEAVY UNIT ANYWHERE IN THE LOWER 48 CONTINENTAL STATES IN THE USA WILL BE $ 349.00 THANKS AND PLEASE TAKE A LOOK AT ALL MY OTHER ITEM.
|
|
|
Mikasa MTX-70 Mulitquip Rammer 52 hrs Jumping Jack Honda GX100 MTX70 Compactor
Powered by Product Description YOU ARE BIDDING ON ONE(1) Mikasa MTX-70 Mulitquip Rammer Jumping Jack w Honda GX100 Engine MTX70 Fast shipping Everything pictured is included. Great shape. Only 52 hours, lots of life left, well taken care of by construction company, $3300+ brand new, asking less than 1/2, purchased less than a year ago This will weight 200 pounds. I'll palletize it. Pickup preferred. If you have your own shipper. You might save on shipping fees. Expect shipping to be in the $275 range, 165 lbs. 13.4" x 11.2" Unit Specifications Engine Specifications Blows Per Minute 695 Engine Make/ Model Honda GX100 Impact Force 3350 lbs. Start Method Recoil Fuel Tank Capacity 3.2 qt Engine Power 2.8Hp Travel Speed per minute 55.8 ft Engine RPM 4100 Max Area Capacity per hour 2183 sq. ft. Fuel Type Gasoline Fuel Consumption ... moreper hour 0.221 gallons MTX70 Dimensions Weight Overall Length 31.0 Inches Operating Weight 165 lbs. Overall Width 13.8 Inches Shipping Weight 195 lbs. Overall Height 39.4 Inches Compaction Shoe Size Width 13.4 Inches Length 11.2 Inches We are an official eBay Drop Store and Trading Assitant. Most of our items for sale are consigned items. We invest many hours into research and consigner inquiry to describe the item to the best of our ability. We are not experts in all items consigned to us. Please ask thorough questions if you need more knowledge about the product prior to your purchase. We will not issue partial discounts for key details or minor omissions that only an expert may know about a certain product. Our photographs tell the best story of the item you will receive. We welcome advice about details. Packaging, and photos. Our photos are our best indicator of the product for sale. Thanks for shopping, FEEDBACK: Please remember to leave us positive feedback! Please contact us prior to leaving feedback if you feel you've received less than 5 star service. By leaving positive five-star feedback for smaller sellers on eBay. Buyers like you will continue to have more choice
|
|
|
Mikasa Multiquip MTX70 Rammer Honda GX-100 Low Hrs Ex-Condition
Please read details before bidding 1- We want positive feedback. 2- Please contact us before leaving negative/neutral feedback. We will always do what ever we can to make every buyer a happy buyer. 3- You have 10 days money back guaranteed and real person customer services. 4- After 10 days. The sale is FINAL( no exception) 5- No return. No refund, if negative/neutral feedback given without contacting the seller. 6- Bidder with"0" feedback must contact seller before placing a bid. If not your bid will be canceled without notice. Feedback: I leave positive feedback for all smooth transactions and I ask for the same in return.I do my very best to describe items to the best of my ability and send them out ASAP.I will always try my best to your shop ping experience a pleasant one.I will leave feedback as soon as feedback is left for ... moreme! DESCRIPTION: YOU ARE LOOKING AT A Mikasa Multiquip MTX70 Rammer Honda GX-100 IN EXCELLENT WORKING CONDITION. AUCTION INCLUDED: Everything as seen on the pictures. No more or no less(actual pictures) FEATURES: Multiquip's Mikasa MTX70 is our most popular selling rammer. This middle-weight compactor is ideal for confined area compaction and is exceptionally well balanced. Patent pending clutch incorporates self-cleaning drum that lowers maintenance and increases service life Throttle controls engine speed. Start/stop functions and fuel shut-off Digital tachometer and hour meter Cyclone air filter triples the amount of clean air to the engine. Lengthening component life and reducing maintenance Anti-vibration system(AVS) decreases vibration to the operator to reduce fatigue, NEW COST $3.298.00 Specifications: Impact Force, 3350 lbf, 14.9 kgf, Shoe Jump Height, 3.1 in, 79 mm, Shoe Dimensions(LxW) 13.4 x 11.2 in 340 x 284 mm, Travel Speed Per Min. 55.8 ft, 17 m, Fuel Tank Capacity, 3.2 qt, 3.03 L, Fuel Consumption Per Hour, 0.211 gal, 0.8 L, Engine Specifications: Engine Make/Model, Honda GX-100, Start Method, Recoil, Engine Power, 2.8 HP, 2.1 kW, Engine RPM, 4100, Fuel Type,
|
|
|
MIKASA MULTIQUIP MQ JUMPING JACK TAMPER RAMMER COMPACTOR MTX 90 low hours
Mikasa MTX-90 Preowned unit and in good working order with low hours. Has signs of normal use and maintenance. Some scuffs and scratches on the exterior covers, some dust and grime on the engine. Unit has been tested starts up easily and runs smooth. Has 128 hours with no signs of slowing down. freight shipping $200 or local pick up is welcome Positive feedback is very important to us. Please let us know if there seems to be an issue or any special requests, we look forward to ebaying with you! Return policy is good for 14 days for any reason please contact us. buyer will have reasonable amount of time to return item Shipping& Handling: we try to keep shipping down as low as possible and ship at fixed rate. Items are packaged well for maximum protection. Item ships FedEx Ground. If you have any special requests please let us know. local ... morepick up is welcome from San Fernando Valley South Calif. 91406
|
|
|
**LOT OF 2** MIKASA GROUND PACKERS WALK BEHIND AS IS UNTESTED **LOOK**
These units are used but I have not tested them so I am selling them as is. Please look at ALL of my pictures. If you have any questions please feel free to contact me on Ebay.
|
|
|
belle group mikasa mq multiquip reversible plate compactor motor RPC 30/50 CLEAN
HELLO WELCOME TO MY AUCTION I AM LISTING A VERY LOW HOUR BELLE GROUP RPC30/50 REVERSIBLE PLATE COMPACTOR UNIT IS POWERED BY A HONDA GASOLINE ENGINE UNIT OPERATES PROPERLY AND WITHOUT ISSUES 100% MECHANICALLY SOUND THESE PICTURES ARE OF THE ACTUAL COMPACTOR YOU WILL RECEIVE. PLEASE ASK ME ALL QUESTIONS PRIOR TO BIDDING. SHIPPING COMPACTOR WILL SHIP VIA FREIGHT TO A BUSINESS OR TERMINAL FOR 249.00 RESIDENTIAL ADDRESSES PLEASE ADD 75.00 FOR LIFT GATE FEES AT END OF AUCTION PLEASE SEND BUSINESS NAME ADDRESS AND PHONE NUMBER THIS WILL HELP EXPEDITE SHIPPING PLEASE READ! OUR PROMISE we promise to deliver what we advertise. Our pictures will be detailed and of actual unit being sold/auctioned all items are shipped within 1-3 days of payment receipt items 50lbs or less will ship the next business day or the same business day depending on time item ... moreis payed for fed ex picks up daily at 3pm once item is received please inspect the item and make sure it is as advertised if for some reason it is not please contact us immediately we will do our best to resolve all issues.if item is as advertised and you are happy with this transaction please take the time to leave us your feedback.it is of great importance to us! thanks and have a blessed day
|
|
|
Multiquip Mikasa Plate Compactor Vibrator Tamper Honda Gas Walk Behind
MIKASA PLATE COMPACTOR MODEL MVC-88VGH. Just back from shop and checked out in very good working condition maybe 100 hours. Buyer to set up shipping LOCAL PICK UP.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13fbb935274-0x106-
|
|
|
2007 Multiquip Mikasa MT74FA Upright Tamper Jumping Jack Rammer 4 Cycle Engine
SKU: SB123728 A: 0015000000ctreM O: 0065000000NzSGj PA: 0015000000VvVTW View Photo Gallery. Calculate Shipping. Location: Henderson. NV 89074 Item Description. This is a no reserve auction for a 2007 Multiquip Mikasa MT74FA Upright Tamper/ Jumping Jack Rammer in good condition. This unit is being dispersed as part of a standard rental fleet rotation package from Sunbelt. One of the largest rental companies in the United States. It was regularly serviced and maintained. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. ... moreTools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Multiquip Mikasa Model: MT74FA Year: 2007 Serial: P5252 Shipping Weight: 206 lbs Actual Weight: 161 lbs Overall Dimensions: 28" L x 17" W x 42" H Shipping Dimensions: 48" L x 40" W x 24" H Features: Gas-powered engine(3.5 HP) Throttle controls engine speed. Start/stop functions and fuel shut-off 13”x11” Foot Specifications: Blows Per Min: Up to 680 Impact Force: Approx. 3.150 lbf Shoe Jump Height: 2.4 in Shoe Dimensions(LxW) 13 x 11 in Travel Speed Per Min: 40 ft Condition: Former rental unit in good overall condition Engine starts and runs strong Unit is in good/average overall cosmetic condition See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies with
|
|
|
MULTIQUIP MIKASA MVH-150 REVERSIBLE PLATE ASPHALT COMPACTOR HONDA GX 200
Up for Sale is this: Preowned Mikasa MVH-150 Reversible Plate Compactor Hello ebay community! Up for sale we have this Mikasa MVH-150 Reversible Plate Compactor. Please view pictures, there is nothing wrong with it and is 100% mechanically sound. It is preowned so it might some scratches or scuffs that were re-touched with a small artists brush. Unit is perfect and ready to use. There is nothing broken on it or about to break. It truly is perfect and comes with a full money back guarantee if its not as listed or if it gets damaged in transit. Unit has new spark plug and fresh oil change. It has been professionally inspected by Mikasa's service center. Hydraulic oil, clutch and engine components all have been inspected. Starts on the first pull, idles great and functions as intended. Works flawlessly. This unit is powered by Honda's ... moreGX 200 gasoline engine. If your looking for preowned quality compactor in the best conditions possible then you will not be dissapointed. Please google its model number for detailed manufactures specs and technical information. We can ship directly to your work site and you can use it the same day as recieved. Sells new here on ebay for $5.295. Please view pictures. Thank you for your time Our#1 concern is that your happy with your purchase. Happy with our service, and happy with ebay in general. If unit is not as mentioned or if its damaged in transit you can send it back for a full hassle free refund. Please do your research and make sure this item fits your needs. Our return policy is great. We strive for your positive feedback and 5 star ratings. We simply want your repeated business. All items are sent Insured to guarantee its safe arrival. Unit will ship on the following 1 day after your payment is recieved. We have items ready to ship by the end of auction. Unit ships to the lower 48 U.S. States for free(commercial address) Residential Address will be $65.00. We are an e-commerce business. We sell strictly online. We do not offer local pickups. We don't have the prop
|
|
|
MULTIQUIP MIKASA MVH-120 REVERSIBLE PLATE ASPHALT COMPACTOR HONDA GX 160 5.5HP
Up for Auction is this: Preowned Mikasa MVH-120GA Reversible Plate Compactor Hello ebay community! Up for sale we have this Mikasa MVH-120 Reversible Plate Compactor. Please view pictures, there is nothing wrong with it and is 100% mechanically sound. It is preowned so it might some scratches or scuffs that were re-touched with a small artists brush. Unit is perfect and ready to use. There is nothing broken on it or about to break. It truly is perfect and comes with a full money back guarantee if its not as listed or if it gets damaged in transit. Unit has new spark plug and fresh oil change. It has been professionally inspected by Mikasa's service center. Hydraulic oil, clutch and engine components all have been inspected. Starts on the first pull, idles great and functions as intended. Works flawlessly. This unit is powered by Honda's ... moreGX 160 5.5hp gasoline engine. If your looking for preowned quality compactor in the best conditions possible then you will not be dissapointed. Please google its model number for detailed manufactures specs and technical information. We can ship directly to your work site and you can use it the same day as recieved. Sells new here on ebay for $4.914 and thats without shipping. Unit will sell to the highest bidder Please view pictures. Thank you for your time Our#1 concern is that your happy with your purchase. Happy with our service, and happy with ebay in general. If unit is not as mentioned or if its damaged in transit you can send it back for a full hassle free refund. Please do your research and make sure this item fits your needs. Our return policy is great. We strive for your positive feedback and 5 star ratings. We simply want your repeated business. All items are sent Insured to guarantee its safe arrival. Unit will ship on the following 1 day after your payment is recieved. We have items ready to ship by the end of auction. Unit ships to the lower 48 U.S. States for $175.00(commercial address) Residential Address will be $65.00 additional. Shipping costs include y
|
|
|
$1 NR 2x Jumping Jack Plate Compactor Wacker & Mikasa Multiquip Weber $1NR
$1 NO RESERVE FOR BOTH MACHINES! BOTH MACHINES IN NEED OF REPAIR! PLEASE READ AND UNDERSTAND! I have for sale a mikasa and wacker jumping jack compactor lot. These were purchased at a construction company liquidation auction. Both machines need work. The mikasa seems to be in worse shape. From the looks of the mikasa I would say it was partially ran over or backed onto by probably a backhoe. The motor case seems to be fine but from what I see it will need* muffler* air box and filter* cage straightened and welded* rubber shock boot* that is what I can see damaged may need more i am not sure. The wacker looks to be in pretty complete shape. It looks to me like it will need a" fuel tank petcock* spark plug boot* possibly more. Please see all pics clearly. If you need additional pics or info please contact me. These are sold as is in non ... moreworking condition. Both will need repairs. You must provide me with a commercial address with fork lift and or loading dock for shipping. Buyer will pay only $220 for both machines shipped to your door step! Again you must provide me with a business address with a loading dock to qualify for $220 shipping. Shipping to residential address will be approx $300-$400* AGAIN. BOTH MACHINES IN NEED OF REPAIR! SOLD AS IS $1 NO RESERVE AND $220 SHIPPING TO COMMERCIAL BUSINESS ADDRESS ONLY* Posted with eBay Mobile
|
|
|
MQ MULTIQUIP MIKASA PLATE TAMPER MVC-64VHW HONDA MOTOR WORKS GREAT
MQ MULTIQUIP MIKASA PLATE TAMPER MVC-64VHW HONDA MOTOR WORKS GREAT MQ MULTIQUIP MIKASA PLATE TAMPER MVC-64VHW HONDA MOTOR WORKS GREAT THIS UNIT IS IN FINE WORKING CONDITION. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE ... moreLOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
|
|
|
MIKASA MULTIQUIP MVH-304 MVH-304GH REVERSIBLE PLATE COMPACTOR TAMPER
MIKASA MVH-304 GH COMPACTOR Up for auction is a Mikasa MVH-304GH compactor. This compactor is in great used condition and is ready to go to work! It is powered by a 11 HP Honda engine that starts right up and runs great! it is a model# MVH-304GH. Serial#H5926 It has fresh oil. New air filter and spark plug. This compactor is expensive new, here is your chance to save! Please check with the manufacturer for complete specs at www.mikasas.com This is a" buyer to pay exact freight" auction. Also the machine can be shipped via Big Red Brokerage or World Wide Express. Just give me your zip code and I will run a quote for you. All of my shipping quotes are to a buisness with unloading capabilities. If to be shipped to a Residence or you need a liftgate truck please specify. Please contact us for available payment methods. Payment is due ... morewithin 3 days of the end of auction. If shipping out of the country, buyer is responsible for any fees or taxes there country may impose. Colorado residents will pay a 7.1% tax. After payment is recieved I will coordinate shipping within 1-3 days. I do my best to accurately describe the items and test the items to the best of my ability. We staff a mechanic and are very knowledgeable. Please keep in mind you are buying used equipment. Not new or refurbished unless stated in the description. Used equipment will have dings, dents, scratches in the paint, minor cracks and chips. Feedback will be left after Feedback has been recieved. If you have a question or concern, please ask before bidding. If you have an issue with the item after receiving it please contact me before leaving feedback. I will work to resolve the issue with in reason. I want happy customers and repeat buyers. Thank you for your bid! On Feb-01-12 at 17:37:40 PST. Seller added the following information: 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-1405bbb986a-0xfc-
|
|
|
Multiquip Mikasa MT-60HS tamping rammer jumping jack
THIS ITEM IS A USED MIKASA MULTIQUIP MT60HS RAMMER/TAMPER IN VERY GOOD WORKING CONDITION! THIS TAMPER IS POWERED BY A ROBIN 2-CYCLE OIL INJECTED ENGINE. STARTS EASY AND RUNS VERY WELL. SHIPPING CAN BE ARRANGED EASILY THROUGH FREIGHTQUOTE.COM OR CAN BE PICKED UP. CONTINENTIAL U.S. LOCATIONS ONLY. FROM PRIOR EXPERIENCE. FREIGHT RUNS APPROXIMATELY $150.00- $200.00 DEPENDING ON LOCATION. BUYER RESPONSIBLE FOR ALL SHIPPING CHARGES AND RELATED SHIPPING EXPENSES. I DO NOT CHARGE FOR PACKING. ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. I DO MY VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. SHOULD YOU HAVE ANY QUESTION REGARDING THIS ITEM. PLEASE FEEL FREE TO CONTACT ME PRIOR TO BID OR PURCHASE. ... moreTHANK YOU
|
|
|
MIKASA MULTIQUIP MVC82VHW PLATE / EXCITER - USED WORKING ORDER
YOU ARE BIDDING ON ONE USED IN WORKING ORDER PLATE/EXCITER FOR A MIKASA/MULTIQUIP MVC82VHW PLATE COMPACTOR. PLEASE SEE PICTURES BEFORE BIDDING. THE SHIPPING WILL NEED TO BE CALCULATED AFTER PURCHASE. PLEASE CONTACT ME FOR SHIPPING QUOTE. LOCAL PICKUP IS AVAILABLE IN SCOTCH PLAINS. NJ! 3 DAY MONEY BACK GUARANTEE IF NOT 100% SATISFIED!
|
|
|
MIKASA PLATE COMPACTOR WALK BEHIND MVG-88-VGHW
THE AUCTION IS FOR A NICE MIKASA PLATE COMPACTOR MODEL MVC-88VGHW WITH ENGINE GX160 HONDA IN GOOD WORKING CONDITIONS. WHAT YOU SEE IS WHAT YOU GET. IF YOU HAVE ANY QUESTION PLEASE E-MAIL ME the buyer will pay for shipping and handle $290.00 just to the lower 48 states. IT WILL BE SHIP FOR A FREIGHT COMPANY. please LET US KNOW if your place is(residential or commercial) with a contact phone number.and must pay within 5 days after auction is finished. If you are located in hawaii, canada or alaska please contact to me for a shipping quote THANKS FOR LOOKING AND PLEASE DON'T BID ON MY ITEMS IF YOU ARE NOT SURE TO PAY FOR IT. GOOD LUCK AND HAPPY BIDDING
|
|
|
MULTIQUIP MVC-110LA - MIKASA HEAVY DUTY PLATE COMPACTOR * TAMPER - SUBARU 8.5 HP
Multiquip* Mikasa model MVC-110LA plate compactor* tamper in good running condition. This is a HEAVY DUTY tamper! The biggest. Heaviest, hardest hitting forward direction plate that Multiquip ever made. This plate weighs 282 lbs without gasoline. It has a baseplate that is 20.5" x 26.2" The compactor has an Subaru Robin EH125- 8.5 HP engine that starts right up, idles fine and is ready to go. The gas tank has a dent in it but it does not effect running. This plate hits at 5600 lb. centrifugal force@ 5800 RPM. It is a MONSTER! We will help with ay and all delivery requests. Local pick up is always welcome and free. Any questions please email or call 516-482-3937. Thank you for the interest. Take care.
|
|
|
MIKASA MULTIQUIP MQ JUMPING JACK TAMPER RAMMER COMPACTOR MTX-70 0NLY 194 HOURS
MIKASA MULTIQUIP MQ JUMPING JACK TAMPER RAMMER COMPACTOR MTX-70 0NLY 194 HOURS THIS IS A 2008 MIKASA MULTIQUIP MQ JUMPING JACK TAMPER RAMMER COMPACTOR MTX-70 4 CYCLE HONDA MOTOR. WORKS GREAT. STARTS AND JUMPS GREAT. ONLY 194 HOURS OF USE. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING ... moreA NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
|
|
|
MULTIQUIP MIKASA PLATE TAMPER MVC 64VHW HONDA GX MOTOR
Mikasa MVC-64VHW Plate Compactor Tamper. HONDA GX 120 4 Stroke motor. Needs a water tank if your going to use it on asphalt. Bars need to be straightened out. There bent. Look at last 2 pictures. Other then that starts on on first pull. If your interested email me to come by and take a look you wont be disappointed. I do have it for sale locally as well so I reserve the right to end this listing should it sell. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
MULTIQUIP MIKASA MTX60HD w/ HONDA GX100------LOW HOURS
BIDDING ON A MULTIQUIP MIKASA MTX60HD JUMPING JACK TAMPER.USED IN EXCELLENT CONDITION.HOUR GAUGE SHOWS 57 HOURS.IT HAS A HONDA GX100 ENGINE.READY FOR WORK.Check out my!Be sure to add me to your! DUE TO NON PAYING BIDDERS IF YOU HAVE A FEEDBACK SCORE OF 10 OR BELOW PLEASE CONTACT US BEFORE BIDDING.IF YOU DO NOT CONTACT US WE WILL CANCEL YOUR BID. LOCAL PICK UP WELCOMED-THERE IS NO CHARGE FOR LOCAL PICK ON ANY ITEM.WE ONLY SHIP TO THE LOWER 48 STATES. ACCEPT PAYPAL OR M.O.PLEASE INCLUDE YOUR PHONE NUMBER FOR THE SHIPPER.FIXED RATES ARE FOR THE LOWER 48 STATES ONLY. AS ALWAYS IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WILL GIVE FULL REFUND AS SOON AS ITEM RETURNED.BUYER PAYS RETURN SHIPPING.BUYER MUST HAVE ITEM PAID IN FULL 7 DAYS AFTER AUCTIONS END.IF YOU HAVE A PROBLEM LET ME KNOW.ALL SALES CONSIDERED FINAL 5 DAYS AFTER DELIVERY DATE. ... moreLOCAL PICK UP WELCOME ON ANY ITEM.WE ARE LOCATED AT 2704 FREEDOM DR IN CHARLOTTE.OPEN 9-5.PHONE IS 704 392-8244.ONE MORE NOTE.I DO SELL RETAIL IN CHARLOTTE.IF THERE ARE NO BIDS ON AN EBAY ITEM I RESERVE THE RIGHT TO SELL THAT ITEM LOCALLY AND END AUCTION.IF THERE IS ONE BID ON AN EBAY ITEM AUCTION WILL BE COMPLETED.I HOPE THIS EXPLAINS ANY CONFUSION ON WHY SOME ITEMS ARE PULLED OFF MY AUCTIONS.I WANT TO BE FAIR BOTH TO MY EBAY CUSTOMERS AND MY LOCAL BUYERS.
|
|
|
MULTIQUIP MIKASA MT74F TAMPING RAMMER COMPACTOR, & Koehring T-1000 Rammer
I picked up both of these Rammer/ Tampers at a local estate sale and do not know the complete history of them. The Mikasa MT74F is a 2002 model and when I primed it with fuel it started easily and started jumping. The on off switch worked. It did not have a fuel line on it and it needs a fuel line. Other than that I really do not know much about it. The other Tamper is a Older Koehring model T-1000 and I was able to start it as well with a prime really easy. Both of these units are being sold together as is. I am offering local pickup on these items but will assist in shipping them with help from the buyer. They are heavy and would have to be shipped freight. I would also consider delivery of them if the buyer was willing to pay for fuel. Please feel free to ask questions and thank you for looking.
|
|
|
2012 Multiquip Mikasa MTX-70 Upright Tamper Jumping Jack Rammer
SKU: UR10028277 A: 0015000000kMrxh O: 0065000000OwFb6 PA: 0015000000kLkjs Loading Video. View Photo Gallery. Calculate Shipping. Location: North Las Vegas. NV 89081 Item Description. This is a no reserve auction for a 2012 Multiquip Mikasa MTX-70 Upright Tamper/ Jumping Jack Rammer in good condition. This unit is being dispersed as part of a standard rental fleet rotation package from United Rentals. The largest equipment rental provider in the world. Bid with confidence knowing it has been regularly serviced and maintained. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our ... moreindustrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Multiquip Model: MTX-70 Serial: V9519 Hours: 24 Shipping Weight: 210 lbs Machine Weight: 165 lbs Shipping Dimensions: 48" L x 42" W x 24" H Features: Gas-powered Honda GX100 engine(3 HP) Throttle controls engine speed. Start/stop functions and fuel shut-off Digital hour meter Cyclone air filter triples the amount of clean air to the engine Anti-vibration system(AVS) decreases vibration to the operator to reduce fatigue Specifications: Blows Per Min: Up to 690 Impact Force: Approx. 3350 lbf Shoe Jump Height: 3.1 in Shoe Dimensions(LxW) 13.4 x 11.2 in Travel Speed Per Min: 5 5.8 ft Resources: For further information on this unit please view. Manufactures specifications pdf for full details Condition: Former rental unit in good overall condition– see photos Engine starts and runs strong– see video Unit is in good overall cosmetic condition– see photos See photos/video for more details Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testin
|
|
|
2011 Multiquip Mikasa MTX-70 Upright Tamper Jumping Jack Rammer
SKU: UR10005635 A: 0015000000kMrxh O: 0065000000OwGPe PA: 0015000000kLkjs Loading Video. View Photo Gallery. Calculate Shipping. Location: North Las Vegas. NV 89081 Item Description. This is a no reserve auction for a 2011 Multiquip Mikasa MTX-70 Upright Tamper/ Jumping Jack Rammer in good condition. This unit is being dispersed as part of a standard rental fleet rotation package from United Rentals. The largest equipment rental provider in the world. Bid with confidence knowing it has been regularly serviced and maintained. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our ... moreindustrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Multiquip Model: MTX-70 Serial: V9167 Hours: 89 Shipping Weight: 210 lbs Machine Weight: 165 lbs Shipping Dimensions: 48" L x 42" W x 24" H Features: Gas-powered Honda GX100 engine(3 HP) Throttle controls engine speed. Start/stop functions and fuel shut-off Digital hour meter Cyclone air filter triples the amount of clean air to the engine Anti-vibration system(AVS) decreases vibration to the operator to reduce fatigue Specifications: Blows Per Min: Up to 690 Impact Force: Approx. 3350 lbf Shoe Jump Height: 3.1 in Shoe Dimensions(LxW) 13.4 x 11.2 in Travel Speed Per Min: 5 5.8 ft Resources: For further information on this unit please view. Manufactures specifications pdf for full details Condition: Former rental unit in good overall condition– see photos Engine starts and runs strong– see video Unit is in good overall cosmetic condition– see photos See photos/video for more details Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testin
|
|
|
2012 Multiquip Mikasa MTX-70 Upright Tamper Jumping Jack Rammer bidadoo
SKU: UR10028273 A: 0015000000kMrxh O: 0065000000OwG0A PA: 0015000000kLkjs Loading Video. View Photo Gallery. Calculate Shipping. Location: North Las Vegas. NV 89081 Item Description. This is a no reserve auction for a 2012 Multiquip Mikasa MTX-70 Upright Tamper/ Jumping Jack Rammer in good condition. This unit is being dispersed as part of a standard rental fleet rotation package from United Rentals. The largest equipment rental provider in the world. Bid with confidence knowing it has been regularly serviced and maintained. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our ... moreindustrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Multiquip Model: MTX-70 Serial: V9552 Hours: 96 Shipping Weight: 210 lbs Machine Weight: 165 lbs Shipping Dimensions: 48" L x 42" W x 24" H Features: Gas-powered Honda GX100 engine(3 HP) Throttle controls engine speed. Start/stop functions and fuel shut-off Digital hour meter Cyclone air filter triples the amount of clean air to the engine Anti-vibration system(AVS) decreases vibration to the operator to reduce fatigue Specifications: Blows Per Min: Up to 690 Impact Force: Approx. 3350 lbf Shoe Jump Height: 3.1 in Shoe Dimensions(LxW) 13.4 x 11.2 in Travel Speed Per Min: 5 5.8 ft Resources: For further information on this unit please view. For full details Condition: Former rental unit in good overall condition– see photos Engine starts and runs strong– see video Unit is in good overall cosmetic condition– see photos See photos/video for more details Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions a
|
|
|
Mikasa concrete tamper parts main body MT65
Parting out an MT65 concrete tamper from Mikasa. This is the main body and its in good working condition. Does not come with foot or pad or head. Only what is shown in the photos.
|
|
|
MULTIQUIP MIKASA MQ TAMPER JUMPING JACK RAMMER MT-74FA HONDA STARTS and RUNS
MULTIQUIP MIKASA MQ TAMPER JUMPING JACK RAMMER MT-74FA HONDA STARTS and RUNS MULTIQUIP MIKASA MQ TAMPER JUMPING JACK RAMMER MT-74FA HONDA STARTS and RUNS THERE IS NO OIL MIXING. THIS UNITS RUNS WITH THE CHOKE CLOSED MAY NEED NEW CARBURATOR. SELLING AS IS. NO REFUNDS NO RETURNS. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR ... morePURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
|
|
|
Mikasa MTX-80 Tamping Rammer
Multiquip Patent pending clutch incorporates self-cleaning drum that lowers maintenance and increases service life. Throttle controls engine speed. Start/stop functions and fuel shut-off. Digital tachometer and hourmeter. Cyclone air filter triples the amount of clean air to the engine. Lengthening component life and reducing maintenance. Anti-vibration system(AVS) decreases vibration to the operator to reduce fatigue. UNIT SPECIFICATIONS Blows Per Min. Up to 678* Impact Force 3510 lb 1592 kg Fuel Tank Capacity 3.2 qt 3 L Travel Speed Per Min. 49.2 ft 15 m Max Area Capacity Per Hour 3165 sq. ft 294 sq. m Fuel Consumption Per Hour 0.264 gal 1 L*Variable speed impact— up to maximum impact force.Specifications are in accordance with CIMA-LEMB Standard No. 1. DIMENSIONS& WEIGHTS Overall Length 31 in 788 mm Overall Width 14.4 in 365 mm Overall ... moreHeight 39.4 in 1000 mm Shipping Dimensions 30 x 17 x 44 in 762 x 432 x 112 mm Operating Weight 183 lb 83 kg Shipping Weight 218 lb 98 kg
|
|
|
MultiQuip Mikasa MT-85H
MULTIQUIP Mikasa MT-85H Gas Powered Ground Pounder Tamping Rammer. Runs Good, gas it up and go jumping. engine runs good with good compression, boot is good, no leaks, good well maintained unit. Local pickup or can drop off at shipper of your choice on your dime. Item specifications can be found here:
|
|
|
Mikasa tamping rammer Model 60L
I am selling a nice Mikasa tamping rammer Model 60L. In perfect working condition. for more information please call me or send me an email. Thanks, Cesar. 678)330-8387.
|
|
|
MIKASA-MULTIQUIP MRV-24G-PADFOOT IMPACT ROLLER-WALK BEHIND-25" WIDE
OFFERED IS A MIKASA 24" TRENCH ROLLER IN VERY GOOD CONDITION. I BOUGHT THIS ROLLER NEW AND IT HAS VERY LITTLE USE. MAYBE 200 OPERATING HOURS. WE GOT OUT OF THE EXCAVATION BUSINESS AND NO LONGER HAVE A USE FOR IT. IT HAS ALWAYS BEEN KEPT INSIDE WHEN NOT ON A JOB. THE MACHINE WAS CHECKED OUT A FEW WEEKS AGO AND IT RUNS FINE. IT HAS A 10.5 HP ROBIN GASOLINE ENGINE. A NEW THROTTLE CONTROL CABLE WAS INSTALLED. THE TOP ENGINE ACCESS HATCH BROKE OFF SOME YEARS AGO BUT DOES NOT AFFECT THE OPERATION OF THE MACHINE. THE ROLLER WEIGHS 2.425 LBS AND PUTS DOWN 5,000 LBS OF COMPACTION FORCE. THESE ARE WELL BUILT MACHINES AND REALLY PUT DOWN A LOT OF COMPACTION FORCE. I CAN ARRANGE SHIPPING. IF NEEDED. I WILL DELIVER THE MACHINE WITHIN A 75 MILE RADIUS FOR FREE, AS LONG AS BUYER HAS A WAY TO LIFT OFF THE MACHINE. CONTACT ME AT 570-296-5369 WITH ANY ... moreQUESTIONS. THIS ITEM IS FOR SALE LOCALLY. SELLER RESERVES THE RIGHT TO SELL THIS ITEM BEFORE THE AUCTION IS OVER.
|
|
|
2013 Multiquip Mikasa Plate Compactor MVC-88VGHW
Multiquip Mikasa Plate Compactor MVC-88VGHW COMPACTOR YOU ARE BIDDING ON A Multiquip Mikasa MVC-88VGHW IN EXELLENT WORKING CONDITIONS it comes as shown in the pictures. CHECK PICTURES! Winner pay for shipping and handle $275.00 just to the lower 48 states.USA) if you are located in ALASKA, HAWAII, CANADA OR PUERTO RICO please contact me for a shipping cost. thanks and good luck. WHAT YOU SEE ITS WHAT YOU GET! THANKS FOR LOOKING GOOD LUCK SE HABLA ESPAÑOL 3450cf. Honda GX160, 19.75in. plate. Our best selling plate now features an advanced anti-vibration handle designed that reduces vibration to the operator by 50% compared to other plate compactors. Sealed belt cover keeps dirt and rocks out of the belt Cog tooth belt drive for longer life Self cleaning plate design minimizes dirt and rock build up Four lifting handles- plate can be lifted ... morefrom the side Engine oil shutdown Impact resistant plastic water tank holds 3.4 gallons(13 liters) Optional urethane plate attachment for use on paving stones and brick pavers(UPA-88A) Optional transport wheel kit(WHL-88) Unit Specifications Centrifugal Force 3420 lbf 15.21 kN Exciter Speed 6000 VPM Plate Size 19.7 x 20.7 in 50 x 52.5 mm Max Forward Speed Per Min. 72 ft 22 m Fuel Consumption Per Hour 0.31 gal 1.17 L Water Tank Capacity 11.5 qt 10.88 L Dimensions& Weights Overall Length 41.75 in 1060 mm Overall Width 19.75 in 502 mm Overall Height 37 in 940 mm Shipping Dimensions 38 x 22 x 29 in 965 x 559 x 737 mm Operating Weight 218 lb 99 kg Shipping Weight 225 lb 102 kg
|
|
|
MIKASA MVH-502DS FORWARD REVERSE COMPACTOR TAMPER 350 HRS I OWNER FREIGHT SHIP
This compactor is a great one owner machine. Everything works great! From the time it was purchased till now I have detailed service records. I also have all original manuals that came with the machine. Parts manual for machine and for engine. Instruction manual for machine and engine. Everything ever done to this machine was done by a certified mechanic. This machine only has roughly 340 hours on it. That's like brand new! If you have any questions please email me, I respond quickly! thanks for looking! Posted with g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-142e1a33c4f-0xfd-
|
|
|
TAMPING RAMMER MXT-70 MIKASA
Honda GX100. 3350 lbs force 11.2 shoe The Multiquip MTX70 is our most popular selling rammer. This middleweight compactor is ideal for confined area compaction and is exceptionally well balanced. Patent pending clutch incorporates self-cleaning drum that lowers maintenance and increases service life Throttle controls engine speed. Start/stop functions and fuel shut-off Digital tachometer and hourmeter Cyclone air filter triples the amount of clean air to the engine. Lengthening component life and reducing maintenance Anti-vibration system(AVS) decreases vibration to the operator to reduce fatigue
|
|
|
MULTIQUIP MIKASA MT75HS TAMPING RAMMER COMPACTOR, ROBIN EC12HS GASOLINE ENGINE
MIKASA MT-75HS TAMPING RAMMER. THIS COMPACTOR IS IN GREAT WORKING CONDITION. SHOWS SOME WEAR FROM NORMAL USE. PLEASE LOOK CAREFULLY AT PHOTOS. THANKS FOR LOOKING. NO RESERVE! FREE LOCAL PICKUP ONLY MODEL MT-75HS U.S. metric) Overall Height 38.9 in. 990 mm) Overall Width 16.1 in. 410 mm) Over Length 29.9 in. 760 mm) Shoe Size 11.2 X 13.4 in. 285 X 340 mm) Blows/minute 690 Impact Force 3200 lbs.blow(1,451 kg/blow) Clutch Automatic Centrifugal Clutch Operating Weight 152 lbs. 69 k) MODEL ROBIN EC-12HS ENGINE Type Air-Cooled 2 Stroke Gasoline Engine Piston Displacement 6.96 cu.in. 114 cc) Max. Output 4.3 hp/5,000 rpm Max. Governed Speed, No Load 3,850 rpm Cooling System Air-Cooled By Fan Lubrication System Fuel-Lubrication Oil Spraying System Fuel Gasoline and 2-Stroke oil Starting System Recoil Starter.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb41%3E-1431677d4ae-0xd3-
|
|
|
Multiquip Mikasa Plate Compactor Tamper Honda Powered Ready to work!
PRODUCT DESCRIPTION: Mikasa Multiqup Plate Compactor This item is in excellent working and very good cosmetic condition. It is fully ready to take on its next heavy duty task. Best starting bid on Ebay. Before you start bidding. Or making a purchasing decision, please make sure you have read and understand all terms and conditions. By placing your bids understand that you are committing to purchase, and you have acknowledged that you have read and agree fully with the terms and conditions. I proudly accept PayPal and all major credit cards through PayPal. Payments must be made within 72 hours(3 days) of auctions end through PayPal. PayPal requires that I ship only to the address provided with your payment at the time of checkout. Please make sure the shipping address you provide to PayPal is correct prior to confirming your payment. New Jersey ... moreState residents pay 7% Sales Tax. The shipping amount is calculated by eBay based on the weight of the item and your location. I offer combined shipping on multiple items. If you purchased several items from me. Please let me resend you an invoice so the current shipping amount is calculated. Items are shipped via USPS. Tracking is uploaded on the day the item is shipped. INSURANCE: For all items that require insurance. There is a"Handling Cost" which is added to the cost of shipping. INTERNATIONAL BUYERS. PLEASE NOTE that I am not responsible for the tax you have to pay when an item arrives your country. Please be sure to know about what taxes you have to pay before you buy an item from me. I offer a 14 day return policy on all of my items. If you are unsatisfied with the item you received. Please first contact me. Sometimes we can resolve a problem without the need of a return. Sealed items must remain sealed for return. Unless item is defective If you have a question or concern before or after receiving your item. Please do not hesitate to contact me. Please make sure to reference an eBay item number with your message. E-mails are answered Monday through Friday
|
|
|
MIKASA MULTIQUIP WALK BEHIND MRH800DS ROLLER DRUM
THE BID IS FOR A MIKASA MULTIQUIP DRUM ROLLER MRH800DS WITH YANMAR DIESEL ENGINE L100V1. 26INCH DRUM ROLLER IN GOOD WORKING CONDITION THE MACHINE HAS BEEN TESTED TO ENSURE THAT IS WORKING THE WAY THAT IT SHOULD BE RUNNING GOOD LUCK TO THE BIDDERS WHAT YOU SEE IS WHAT YOU GET. IF YOU HAVE ANY QUESTION PLEASE E-MAIL ME LOCAL PICK IT UP OR DELIVER IT the buyer is responsable to pick up the tem. Or we can deliver it to sorouding states from california for resanable price. please contact us for any question about it. buyer must pay within 5 days after auction is finished, THANKS FOR LOOKING AND PLEASE DON'T BID ON MY ITEMS IF YOU ARE NOT SURE TO PAY FOR IT. GOOD LUCK AND HAPPY BIDDING RESIDENTS OF CALIFORNIA PAY TAXES. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1432b20a558-0xfa-
|
|
|
MIKASA HONDA GX100 COMPACTOR dirt soil wacker packer jumping jack tamper rammer
I am in Kingsburg California 93631. 20 miles south of Fresno. You will need to pick this up in person or send someone to pick it up for you. If sending a freight co I can put it on a pallet. For a cheap shipping quote you might try putting it up for bid to the independent shippers on uship. MIKASA HONDA GX100 COMPACTOR. IT RUNS. 4 stroke Honda motor. Hasn't been ran in a while. Tested today& it starts, runs, wacks, packs, did everything it was supposed to. I did have to let it warm up for a minute before it would run with the choke off. Like all of the items we sell, this item is sold"AS IS" We sell a wide variety of used items. We try to describe them as best we can but we are not professionals, nor are we experts on any type of items we sell. Most of the items we sell are used. When we sell a used item normal wear, scratches, ... moresigns of use should be expected. Most items will need a quick cleaning. We do not offer warranties or refunds. Should a refund be granted for any reason it will be less all the shipping fees. All items are sold"AS IS" All sales final. No returns. You are welcomed to come by& pick it up if you live close enough. Please ask any& all questions prior to bidding. Attention PAYPAL users* Due to paypals nonexistent seller protection policy I will only ship to the address paypal sends me NO EXCEPTIONS.
|
|
|
Mikasa Multiquip MTX60 MTX-60 Rammer Compactor Honda GX-100 Ex-Condition
Mikasa Multiquip MTX60 Rammer Compactor Honda GX-100 Ex-Condition This item is used and has been tested in our shop for proper working operation. Please note we try to describe each item to the best of our ability however please view our photos carefully, we do not want any misunderstanding. The Mikasa MTX-60 rammer for applications requiring even greater productivity. Its applications include soil compacting for road. Embankments and reservoirs as well as backfilling for gas pipelines, water pipelines and cable installation work. Equipped with an on-board hourmeter/tachometer that allows accurate tracking of usage and maintenance intervals. The unit is powered by a reliable Honda engine and features an anti-vibration system(AVS) which reduce opertaor fatigue by up to 50% Also keep in mind that you are bidding on a used piece of equipment. ... moreOnly the items seen in the pictures is what is included in the auction. We have no other accessories thank you for looking. ITEM MUST BE PICKED UP FROM OUR SHOP IN SAN BERNARDINO. CA. OR POSSIBLY IN LOS ANGELES AREA
|
|
|
MQ MULTIQUIP MIKASA REVERSIBLE HYDRAULIC PLATE TAMPER MVH-200GH HONDA MOTOR
MQ MULTIQUIP MIKASA REVERSIBLE HYDRAULIC PLATE TAMPER MVH-200GH HONDA MOTOR MQ MULTIQUIP MIKASA REVERSIBLE HYDRAULIC PLATE TAMPER MVH-200GH HONDA MOTOR. THIS UNIT STARTS AND RUNS FINE. THIS UNIT IS 427 LBS. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE ... moreNUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
|
|
|
Mikasa Tamping Rammer MODEL 60L 600 VPM 3.3 CC Runs
FOR SALE A USED MIKASA TAMPING RAMMER ENGINE RUN NEEDS TUNEUP.COMES WITH EXTRA PULL START. LOCAL PICKUP OR I WILL PLACE ON SKID AND PUT ON DOCK FOR PICKUP FREE.
|
|
|
Mikasa MRT40F Plate Compactor
This is a used compactor. Starts right up. Item is sold as-is.
|
|
|
MIKASA JUMPING JACK RAMMER / TAMPER / PAVER PAVER MT-75HS LOT OF 1
Sold as is. Untested but motor turns. Had is checked out by professional sales rep. and said to have all parts intact. Also the orange rubber piece needs to be replaced on both see pictures. For more details please send me a message.
|
|
|
MTX-70 MIKASA TAMPING RAMMER
The Mikasa MTX-70 tamping rammer is a powerful compacting tool capable of applying a tremendous force in consecutive impacts to a soil surface. Its applications include soil compacting for road. Embankments and reservoirs as well as backfilling for gas pipelines, water pipelines and cable installation work. Equipped with an on-board hourmeter/tachometer that allows accurate tracking of usage and maintenance intervals. The impact force of the MTX-70 levels and uniformly compacts voids between soil particles to increase dry density. Circular motion is converted to create impact force. The unit is powered by a reliable Honda engine and features an anti-vibration system(AVS) which reduce opertaor fatigue by up to 50% The unit is powered by a reliable Honda engine and features an anti-vibration system(AVS) which decreases vibration to the operator ... moreto reduce fatigue.
|
|
|
Mikasa MT-75HS Tamping Rammer
1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1440c4c57bc-0x109-
|
|
|
Multiquip Mikasa MTX-70 Jumping Jack Tamper 231 Lifetime Hrs
This jumping jack is in great condition. Works great no problems. it has some wear and tear but that is to be expected with a construction tool. It only has less then 100 hrs on it so its practically new in terms of lifetime hours used. MTX70HDHonda GX100 Engine. 3,350 lb impact force, 11.2 in shoe Multiquip's Mikasa MTX70HD is our most popular selling rammer– new and improved! This middle-weight compactor is ideal for confined area compaction and is exceptionally well balanced. Now with a redesigned fuel-tank that meets new EPA standards and features an integrated tachometer/hour meter. MTX-Series rammers are renowned for performance and ease of operation. The MTX-Series includes the features most preferred by contractors such as: Cyclonic air cleaners that capture 98% of airborne dust particles Long-lasting laminated wood and steel ... moreshoe Low vibration handles for operator comfort Combination hour meter/tachometer Durable guards to protect the engine from damage Redesigned fuel tank to meet EPA standards for evaporative emmissions Unit Specifications Blows Per Min. Up to 690* Impact Force 3.350 lbf 1520 kgf Shoe Jump Height 3.1 in 79 mm Shoe Dimensions(LxW) 13.4 x 11.2 in 340 x 285 mm Travel Speed Per Min. 55.8 ft 17 m Fuel Tank Capacity 2.5 qt 2 L Dimensions& Weights Overall Length 31.0 in 788 mm Overall Width 13.8 in 350 mm Overall Height 40.4 in 1027 mm Operating Weight 165 lb 75 kg Engine Specifications Engine Make/Model Honda GX100 Start Method Recoil Engine Power 2.8 HP 2.1 kW Engine RPM 4.100 Fuel Type Gasoline Posted with
|
|
|
Multiquip Mikasa MTX70 Rammer Compactor
Blows/Minute: variable up to 690 Impact Force: 3.350(1,520) Travel Speed- ft.m) per min. 55.8(17) Maximum Area Capacity- sq. ft. sq. m) pm: 3,165(294) MultiQuip's four cycle rammers are designed for high efficiency with lower exhaust emissions, less noise and better fuel economy than standard two-cycle rammers. NO NEED FOR MIXED FUEL! The rammer features extra heavy-duty shock absorbers and precision balance to ensure operator comfort and extended unit life. The rammer is powered by Honda's new vertical cylinder 4-cycle GX-100 engine and is fit for all basic rammer applications, especially those where noise is a concern. Multiquip Mikasa MTX70 Rammer Compactor MultiQuip MTX70 Rammer MultiQuip MTX70 Rammer 1 68 lbs. Honda GX100 4 cycle engine Blows per minute 690 maximum 3.2 Quart fuel tank Burns less than 1/4 gallon per hour Travels ... more39.3 feet per minute Covers 3165 square feet per hour 29.9"L x 13.8W x 39.3" H 2.8 Horsepower 4100 RPM 2900 Lbs impact force Patent pending clutch design c leans itself of dirt and debris Throttle controls engine speed. Start/stop and fuel valve shutoff with one lever Digital tachometer and hour meter New Cycleon air filter system may triple dirt removal before it reaches the air filter AVS anti vibration system helps reduce the vibration to the operator Blows/Minute: variable up to 690 Impact Force: 3.350(1,520) Travel Speed- ft.m) per min. 55.8(17) Maximum Area Capacity- sq. ft. sq. m) pm: 3,165(294) MultiQuip's four cycle rammers are designed for high efficiency with lower exhaust emissions, less noise and better fuel economy than standard two-cycle rammers. NO NEED FOR MIXED FUEL! The rammer features extra heavy-duty shock absorbers and precision balance to ensure operator comfort and extended unit life. The rammer is powered by Honda's new vertical cylinder 4-cycle GX-100 engine and is fit for all basic rammer applications, especially those where noise is a concern. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1441e6616fe-0x102-
|
|
|
mikasa walk behind plate compactor Honda 6.5
You are BIdding on a compactor in perfect working condition very powerful no smoke cranks right up. Just needs a new owner to put in good used for the next work project to get the jod compact and finish. GOOD LUCK AND HAPPY BIDDINg
|
|
|
Multiquip Mikasa MVH-200 Vibratory Plate Compactor Honda GX240 - Parts/Repair
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 641319 A: 0015000000rB7G0 O: 0065000000Po0PE PA: View Photo Gallery. Calculate Shipping. Location: Rialto. CA 92376 Item Description. This is a no reserve auction for a Multiquip Mikasa MVH-200 Vibratory Plate Compactor- Parts/Repair. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Mikasa Model: MVH-200-8HA Year: Unknown Serial Number: E 2090 Shipping Weight: 500 lbs Shipping Dimensions: ... more47"L x 36"W x 55"H Features/ Specifications: Honda GX240 8.0 Engine 27"L x 20"W Vibratory Plate 1.59 Gallon Tank 8 HP 5.200 VPM 7.056 Centrifugal Force Condition: Being sold as parts and repair condition Engine does not start Unit is in fair overall cosmetic condition See photos for more details When bidding. Please consider this unit to be for parts or repair only Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/testing. In addition, all conditions are cross-referenced with service personnel, operators, and maintenance system records(when available) bidadoo, Inc. makes no guarantees to actual hours, miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights, dimensions, features, specifications and resource links are provided for informational purposes only, are approximate, and may vary from year to year, model to model and machine to machine. Payment. Shipping and Fees: For items not picked up locally. We offer a palletizing service for a minimum charge of $75 for this item. This is not incl
|
|
|
Multiquip Mikasa MTX-70 Soil Asphalt RAMMER GAS Plate Compactor -SAVE- L@@K
UP FOR AUCTION IS A USED Multiquip Mikasa MTX-70 four-Cycle Rammers(MANUFACTURER STOCK PHOTO) This Mikasa MTX-70 four-Cycle Plate Compactor Still In Excellent Working Conditions, Comes With a Honda Engine Multiquip Mikasa MTX-70 four-Cycle Rammers The Multiquip Mikasa MTX70 Rammer is our most popular selling rammer– This middle-weight compactor is ideal for confined area compaction and is exceptionally well balanced. Now with a redesigned fuel-tank that meets new EPA standards and features an integrated tachometer/hour meter. MTX-Series rammers are renowned for performance and ease of operation. The MTX-Series includes the features most preferred by contractors such as: Cyclonic air cleaners that capture 98% of airborne dust particles, Long-lasting laminated wood and steel shoe, Low vibration handles for operator comfort, Combination hour ... moremeter/tachometer, Durable guards to protect the engine from damage, Redesigned fuel tank to meet EPA standards for evaporative emissions, Specifications Engine– Honda GX100 2.8 hp. Blows Per Min. Up to 690* Impact Force– 3.350 lbf. 1520 kgf Shoe Jump Height– 3.1 in. 79 mm Shoe Dimensions(LxW) 13.4 x 11.2 in. 340 x 285 mm Travel Speed Per Min. 55.8 ft. 17 m Fuel Tank Capacity– 2.5 qt. 2 L Dimensions& Weights Overall Length– 31.0 in. 788 mm Overall Width– 13.8 in. 350 mm Overall Height– 40.4 in. 1027 mm Operating Weight– 165 lbs. 75 kg. Bid With Confidence. If You Do Not Get What Is Listed/Pictured We Will Refund You 100% of your Money Including Both Ways Shipping Charges. Thanks& Good Luck NO RESERVE ON THIS ITEM. SORRY! NO LOCAL PICK UPS SHIPPING AND HANDLING FOR THIS ITEM HEAVY UNIT ANYWHERE IN THE LOWER 48 CONTINENTAL STATES IN THE USA WILL BE $ 89.00 THANKS AND PLEASE TAKE A LOOK AT ALL MY OTHER ITEM.
|
|
|
Mikasa Sangyo MVC-88GHW
Compact plate. Runs great Posted with
|
|
|
MIKASA MVC82VH 3080 lb Honda Single Direction Vibratory Plate Compactor
THIS PLATE COMPACTOR IS IN VERY GOOD WORKING AND COSMETIC CONDITION. ITS BEEN USED A FEW TIMES BUT IT WORKS GREAT. PLEASE LOOK AT ALL THE PICS BEFORE BUYING. THANKS FOR LOOKING. ARIZONA EZ-PAWN 9421 W BELL RD SUN CITY AZ LOCAL PICKUP ONLY Returns accepted only if there is a major error in the item description AND it is returned within 3 days of receipt in the same condition in which it was shipped. Refund for amount of winning bid ONLY. SHIPPING COSTS ARE NOT REFUNDED. All of my auctions have insurance optional; if you want your item insured, contact me prior to making your payment. Without insurance, the buyer assumes all responsibility for any damage or loss in transit. Payment Policy Only PayPal is Accepted or Credit Card over the phone All payments are required immediately after winning your auction Item will be shipped immediately on ... morethe same or next business day of receiving full payment If you are in the local area you can come the shop to pay and pick up your item Shipping Policy Shipping within the 48 Contiguous United States ONLY No International Shipping No Delivery to Alaska or Hawaii No P.O. Box Delivery No APO/FPO Delivery Paypal Confirmed Addresses Only Items Will be Shipped on the Next Business day of receiving full payment Tracking Number will be provided Returns Policy Actual Images of item are shown above NO RETURNS are Accepted for this Listing Unless Item Arriaves Damaged.
|
|
|
WACKER WP1550 WALK BEHIND COMPACTOR WP 1550 TAMPER RAMMER MIKASA MQ HONDA GX 160
Up for Sale is this Preowned: Wacker WP1550 Walk Behind Compactor w/ Honda GX 160 Gasoline engine Hello ebay community! Up for auction/Sale we have this Wacker WP1550 Walk Behind Compactor. Unit is gasoline powered. Unit is in 100% mechanically sound conditions. There is nothing wrong with it. No leaks, no loss of pressure, no power losses, no headaches! This compactor is in immaculate conditions! Unit is powered by Honda's GX 160 gasoline engine. Unit turns right on, accelerates fine and idles great. Does not turn off, no smoke, no issues. If your looking for a quality compactor in mechanically sound conditions and ready to work at great savings then I am sure you will not be dissapointed with this purchase. Your satisfaction is our upmost concern. We do not issue partial refunds or credit on our items, if for whatever reason item arrives ... moredamaged or not as listed you may send it back for a full refund of what you originally paid. Your feedback and repeated business really and truly is our#1 concern. Unit is ready to work! Guaranteed! Pictures posted are of actual machine. Our#1 concern is that your happy with your purchase. Happy with our service, and happy with ebay in general. If unit is not as mentioned or if its damaged in transit you can send it back for a full hassle free refund. Please do your research and make sure this item fits your needs. Our return policy is great. We strive for your positive feedback and 5 star ratings. We simply want your repeated business. Unit ships to the lower 48 U.S. States and to Canada only. Shipping within the lower 48 U.S states to a COMMERCIAL address is $175.00. Residential Shipping is $70.00 additional! Canada shipping is $300.00 Shipping costs include your item being strapped to a pallet. Stretch wrapped, labeled and delivered to your commercial address for the above mentioned. Commercial addresses will not be subject to any additional charges. Shipping will be via Freight Truck Company. All items are sent Insured to guarantee its safe arrival. Unit will ship o
|
|
|
MIKASA MTX-60 RAMMER, VERY NICE !!
Auction includes ONLY MIKASA MTX-60 RAMMER. VERY NICE! The item is in very good condition! Features: 4 Cycle Honda GX 100 Rammers•For applications requiring even greater productivity•Patent pending clutch incorporates self-cleaning drum that lowers maintenance and increases service life•Throttle controls engine speed. Start/ stop functions and fuel shut-off•Digital tachometer and hourmeter•Cyclone air filter triples the amount of clean air to the engine. Lengthening component life and reducing maintenance•Anti-vibration system(AVS) decreases vibration to the operator to reduce fatigue Specifications: Item# MTX60•Blows Per Min: 695•Impact Force: 3060 lb•Fuel Tank Capacity: 3.2 qt•Travel Speed Per Min: 55.8 ft•Max Area Capacity Per Hour: 2183 sq. ft•Fuel Consumption Per Hour: 0.147 gallons•Overall Dimensions: 28.1" L x 13.8" W x 38.8" ... moreH•Shipping Dimensions: 30" L x 15" W x 43" H•Shipping Weight: 172 lb•Weight: 141 lbs. Only 76 hours of use This Item comes exactly as seen in pictures and these are part of the description PLEASE BUY WITH CONFIDENCE Please email us if you have any questions The Fine Print: Summary of My Selling Policies Bidding and Buy it now Terms: By placing a bid or using the BUY IT NOW option(if available) you are agreeing to the terms set forth in this auction. Purchaser acknowledges that it is purchasing the assets on an“as is. Where is, with all faults” basis. Purchaser further acknowledges that A-1 Hawk has made no representation or warranty, statutory, express or implied, with respect to the assets including, without limitation, any representations or warranties regarding the condition of the assets or any representations or warranties that the assets will be merchantable or fit for any particular purpose. The only representation or warranty of any kind whatsoever made by A-1 Hawk is a warranty that A-1 Hawk is the owner of the assets. The purchaser. By bidding or buying it now on this asset, indicates their acknowledgment to the terms of this disclaimer, and wai
|
|
|
Dynapac jumping jack upright tamper mikasa multiquip wacker
This is an lt6000 dynapac rammer starts and runs. Three spare engines for parts or rebuild. Gx100 hondas. This will make you a great peice of equipment for a fraction of a new one! Bid confidently.
|
|
|
MULTIQUIP MIKASA MT75HS TAMPER RAMMER Ground COMPACTOR Jumping Jack
MULTIQUIP MIKASA MT75HS TAMPER RAMMER Ground COMPACTOR Jumping Jack. In good looking and working condition. Starts and runs with no problem. Comes as shown in pictures. Please contact us with any questions. We treat items we are selling as items we are buying! Thank you and good luck bidding! Please contact if you have any questions.
|
|
|
MIKASA 306 COMPACTOR GAS & PACKRAT CARRIER
1) MIKASA 306 GASOLINE REVERSIBLE PLATE COMPACTOR, HONDA MOTOR PULL STARTS VERY EASILY. 1) STREET PRINT PAC RAT.THIS IS TO CARRY IT ON. THE REVERSE ON THE COMPACTOR IS NOT WORKING.BEING SOLD AS SET.
|
|
|
i.3243 Mikasa MVH306D Walk-Behind Plate Compactor
i.3243 Mikasa MVH306D Plate Compactor Model: MVH-306D Serial No. M 1036 Weight: 310kg Output: 4.9kw. Goldstar Equipment Supply Corp Address: 75 Windsor Ave. Mineola, NY 11501 Sales Phone: 516.741.1000 Billing Phone: 516.741.1300 Fax: 516.741.2700 Local Pick Up. Item will be released in one to three business days after full payment is received. Shipment picking up address is 10 Windsor Ct. Mineola, NY 11501. We can assist the buyers in finding a freight company. All shipping related transactions and insurances are between our buyer and their chosen freight company. New York Sate residents will be charged sales tax and local taxes and any other required New York State fees. Out of state buyers may still be responsible for paying state/ local tax though we do not collect any taxes. Full payment is due within 3 business days from time of purchase ... moreunless prior arrangements are made. Paypal is no longer accepted for heavy equipment due to exorbitant fees involved with ebay and paypal. A coupon may be applied to this transaction for the inconvenience. Payment types accepted: Bank Transfer. Certified Bank Check, Visa/ MasterCard/ Discover/ Amex Cards. At the end of the auction you will be sent a link to finish checkout. If you are uncomfortable entering the credit card information online you can call us to process it over the phone. All of our credit card transactions are handeled SECURELY through Wells Fargo Bank. Questions: If you have any questions about payment terms. Please do not hesitate to call us 516.741.1300. Customers are encouraged to inspect. Operate, test, or drive anything we have for sale before buying it. Upon request, we can provide video of any item. This merchandise is being sold as is, with no warranty, expressed, written or implied. We do reasonable testing on the equipment when it comes in and will not be held responsible for unknown defects, and do not provide a warranty implied or otherwise. No allowance or set aside will be made on account of any imperfection, defect or damage. It is the
|
|
 |