|
Order by:
Available to:
This site contains affiliate links for which I may be compensated
|
Buy It Now
$18.75 Shipping Condition: New Location: Newport, United States This bid is for a vintage never used, still has the cosmoline coating on it, No.12 Palmgren bench mount machinist swivel vise. Has 2 1/2" jaws with 3" ... moreopen capacity. Very nice. Shipping is $18.75.
$17.90 Shipping Condition: Used Location: Ellington, United States Diamond Dresser with Holder. 1-1/2" Grind Dog. Lot of Assorted Machinists Goodies. #1 Tap Adapters. The two torque drive adapters have stuck plungers. ... moreThe other is ok. Thread Mic Standard. No Reserve!
Buy It Now
$14.38 Shipping Condition: Used Location: Thompson, United States QKG73 Precision Tool Vise Machinist Grinding Vise 73x190 3" x 7". It is 2-7/8" wide x 7-1/2" long x 2-5/8" high and the jaws have a depth of 1-3/8" and ... moreopen to about 4". This vise was not used for any other machining except grinding. It works as it should and is in good condition.. See photos.
Buy It Now
$10.60 Shipping Condition: Used Location: Newton Upper Falls, United States Up for sale is a heavy-duty precision V-block for drilling and milling work. The block is 2" tall, 2" wide, and 2 1/2" long. It weighs 2lb, 6oz. Three ... morethreaded holes are drilled on both sides. No markings. Great condition. The photos are a crucial part of the item description. Please review them carefully. Feel free to message me with any questions. Thanks! I will always combine shipping for multiple items purchased at the same time, whenever available and applicable. Please pay for all items as you usually would. I will then combine the shipment and send you a refund for the savings.
Buy It Now
$12.00 Shipping Condition: Used Location: Watertown, United States This is a 3 1/2" adjustable drill press vise. It works good but could use a cleaning. It has been in a workshop. Pictures show condition
$15.35 Shipping Condition: Used Location: Elgin, United States The maximum opening is 2 5/16" The vise slides in place In the user made pedestal swivel base. There is a groove milled in the side of the vise that rides ... moreon a keyway rib on the top of the pedestal base.
Buy It Now
Free Shipping Condition: Used Location: Mansfield, United States SENACON BV-40. MACHINIST MILLING/DRILL PRESS VISE. VISE IS 3 3/8" TALL. GOOD USED CONDITION WITH NORMAL USAGE WEAR AND AGE. CAST IRON CONSTRUCTION.
Buy It Now
Free Shipping Condition: Used Location: Sturgis, United States Nice large older vise in good working condition. Some stains and marks as shown in pictures but overall great tool. Heavy-Duty over 25 lbs plus some spacer ... morestock included. Free flat rate shipping included. 6" opening. 5" wide jaws. 9 1/4" overall length.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States Drawbar Thread Precision Ground To Close Tolerance. Quantity: 1. Unit Weight Hardened And Ground Throughout.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States 1" Precision R8 Round Collect. 0006". Drawbar Thread: 7/16"-20. Precision ground to close tolerance. Quantity: 1. Weight: 12 oz estimate only . Item#: ... more2901. Hardened and ground throughout.
Buy It Now
$8.95 Shipping Condition: Used Location: Fort Lauderdale, United States
Buy It Now
$14.50 Shipping Condition: Used Location: Saunderstown, United States Made by Toolmaker. Machinists X & Y Centering Fixture. Item is in Good Used Working Condition.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature: Made of high quality casting steel for long life and increased durability. All parts heat treated. 1/2" T-Slot, 3/8-16 stud size, & 1" step block ... morewidth (all standard). Contains (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long. Also contains (4) coupling nuts, (6) forged steel step clamps (2 each based on stud sets), (12) steel step blocks, (6) flange nuts, (6) T-nuts, & wall holder. Description:.
Buy It Now
Free Shipping Condition: Used Location: South Plainfield, United States graham products 6” machinists vise 6-1/2 opening SC36. Used but in good condition. Jaw plates have some wear but were cleaned up. Includes stop block. ... moreGood vids without a whole lot of used. No slop. Please ask any questions prior to purchase, thanks for looking.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Brand new 17 PC: 1/8 - 1-1/8" by 16th: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1", 1-1/16, 1/16. Made Of Highest ... moreGrade Steel Available Hardened and precision ground Collet end OD & ID is threaded Precision Ground To Close Tolerance .0006" TIR UPC Does not apply Brand Handdo MPN 749029 Collet Type Round Collet Size 1/16"-1-1/16" Head Diameter 1/2 in.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: Made of high quality casting steel for long life and increased durability. All parts heat treated. 1/2" T-Slot, 3/8-16 stud size, & 1" step ... moreblock width (all standard). Contains (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long. Also contains (4) coupling nuts, (6) forged steel step clamps (2 each based on stud sets), (12) steel step blocks, (6) flange nuts, (6) T-nuts, & wall holder. UPC Does not apply Brand Handdo MPN 466621 Tool Type Clamping Kit.
$15.10 Shipping Condition: Used Location: Sunbury, United States The large one measures in 6" diameter and the two small ones measure 4-7/8". The numbers on each of the small ones is: 37, 39, 41, 43, 47, 49 // 21, 23, ... more27, 29, 31, 33. The large one is: 62, 64, 72, 78, 80, 84, 90, 96, 100, 120. These are used. Not by me. I will try to answer any questions to the best of my ability.
Buy It Now
$10.40 Shipping Condition: Used Location: New Palestine, United States Machinist/Tool Maker Made Grinding Vise. 1-11/16” Wide Jaws. 3/4” Deep Jaws.
Buy It Now
$4.00 Shipping Condition: New Location: Litchfield, United States
$13.60 Shipping Condition: Used Location: Rancho Cucamonga, United States Machinist 1x2x3 Blocks-Fixture-Vblock. Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
$15.02 Shipping Condition: Used Location: Louisville, United States Up for auction is a George Sherr Magnetic Transfer V Block and Parallel Set. In good condition considering its age, dirty/tarnished/normal wear from age/use. ... moreV Blocks measure approx 2-3/8" x 1-3/4" x 1-3/4" Parallels measure approx 3-7/8" x 1-3/4" x 1" Please view all pics. As they are part of the description. Please see my other listings
Buy It Now
$15.70 Shipping Condition: Used Location: Westfield, United States JACOBS DRILL CHUCK NO# 32 CAP. 0-3/8" 1/2" SHANK MADE IN USA The photos are accurate to each description and exact to what you will receive. ... morePlease feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
$17.00 Shipping Condition: Used Location: Auburn, United States Vise 1 3/4 x 4 [0pening 2 x 3/4 ]. angle set 45/40/35/30/15/10/5/4/3/2/1/ 1/2 deg. parallels 2 set 6 x 1 1/4 x 3/4.
$14.38 Shipping Condition: Used Location: Racine, United States This is a small Anvil Vice. DIXON. It belonged to my grandfather. It was in a drawer in his tool chest wrapped up in a cloth. I had seen him pull it out ... moreand use it from time to time. It is in Great shape. It shows little signs of use. I believe that he used it for machining small parts. All sales are final. Shipping to the lower 48 states only. Thank you for looking.
Buy It Now
$9.99 Shipping Condition: Used Location: Chicago Ridge, United States Chicago Tools Eng Co. Used Condition. Check the pictures for more details.
Buy It Now
$9.80 Shipping Condition: Used Location: Salem, United States Very good user condition with normal signs of use, age & wear.
Buy It Now
$6.00 Shipping Condition: Used Location: Miami, United States Perfect for machinists and those using a Pratt & Whitney Lathe.
Buy It Now
$138.02 Shipping Condition: Used Location: Flagstaff, United States CALIFORNIA PROP 65 WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Buy It Now
$166.86 Shipping Condition: Used Location: Cedarville, United States Up for bid: Vintage Columbian Bench Vise as follows: 4" wide jaws that open 8" 27" long- 8 3/4" wide at the bottoom of the swivel ... morebase- 9 1/4" high Cleaned and painted- no rust. Dirt, or grease. Real nice condition. Please note: If you choose UPS shipping. UPS does not deliver to post office boxes-will need to be delivered to a physical address. Please contact me if you have any questions. Click here to check out my other items. Please add me to your favorites list!
Buy It Now
$33.59 Shipping Condition: New Location: Rockford, United States This item has never been used or tested. What you see in the picture is exactly what will arrive at your door! China (subject to change). Country of Origin. ... moreThread Size. Thread Length. Overall Width.
Buy It Now
Free Shipping Condition: New Location: Minooka, United States TE-CO 20212. Clamping Kit,Super Machinist,51pc. PROTO J4245 Gen Purpose Puller Set,3/6/10 Ton. Grainger reserves the right to accept or reject any order. ... moreDiversion contrary to U.S. law is prohibited.
Buy It Now
$153.24 Shipping Condition: Used Location: Millersburg, United States Closes to 1-1/2". Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace. We ... moreare dedicated to understanding the unique challenges and opportunities that each industry faces.
Buy It Now
Free Shipping Condition: New Location: Rochester, United States THERE IS NO SIDE LOCKING BRACE INCLUDED. THERE ARE ALSO 50+ 1/4"(0.250) DOWEL HOLES ON THE TOP PLATE. THERE ARE OVER 120 TAPPED HOLES(1/4-20)IN THE TOP ... moreAND ON THE SIDES. THIS WAS FROM AN ESTATE SALE, THE PLATE, APPEARS TO HAVE NEVER BEEN USED?.
Buy It Now
$10.40 Shipping Condition: New Location: Chino, United States Machinist's Bench Block. The knurled side provides a good gripping surface. AIR, POWER & HAND TOOLS. A handy tool for holding work when driving pins, ... moredrilling, etc. Why should you buy from us?. Made from hardened and ground steel.
Buy It Now
$10.40 Shipping Condition: Used Location: Tewksbury, United States For sale is a lot of 20 ER11 Collets, all in usable condition. Includes 1/4" & 5/8" collet arbors, also not marked, but look like Rego-Fix arbors. See ... morepics for collet sizes.
Buy It Now
$28.50 Shipping Condition: Used Location: Sheffield, United States THRU HOLES AND COUNTER-BORES ARE.328" THRU WITH A. 45" COUNTERBORE IN LARGE SLOT IN WIDEST VEE AS SHOWN. VEE'S ARE ABOUT 1.04" WIDE. 48" WIDE AND. 10" ... moreWIDE. THIS IS ONE HANDY CUBE WITH ALL THE TAPPED HOLES AND THRU HOLES WITH COUNTER-BORES TO BOLT TO AN ANGLE PLATE OR AS NEEDED!
Buy It Now
Free Shipping Condition: Used Location: Springboro, United States Previously owned set.
Buy It Now
$9.00 Shipping Condition: Used Location: Newington, United States Possible for a Van Norman?.
Buy It Now
$9.95 Shipping Condition: Used Location: Yakima, United States We Have Multiple Units Of This Available. Just Ask If You Need Any More!
Buy It Now
$7.57 Shipping Condition: Used Location: Lebanon, United States 2 Starrett Parallel Clamps No. 161-C & No. 161-E Nice condition. The larger 161-E top clamp has a relief cut into it see pic.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States 3" Precision Toolmaking Vise. Vise Dim L x W x H (in) High Precision one-piece Steel Construction. 4" Opening. 7-1/2 x 3 x 3 estimated . Ground Flat.
Buy It Now
$7.57 Shipping Condition: Used Location: South Berwick, United States
Buy It Now
$41.09 Shipping Condition: Used Location: Wolf Creek, United States This is a machinist angle milling vise. It does not have a maker stamp, but was made in Japan. The jaws are 2.5 in. wide and 1.75 in. The capacity is ... more2.25 in. Check it out. I have seen this happen over and over again.
Buy It Now
$9.75 Shipping Condition: Used Location: New Britain, United States As shown in pictures
Buy It Now
$8.00 Shipping Condition: Used Location: Sheffield, United States THIN GAGES OR PARALLELS (4). 30 , 34 ,12 AND 45 SPECIALTY DESIGN TRIANGLES IN EXCELLENT USED CONDITION AS SHOWN. THESE TRIANGLES ARE THIN 5/64" AND ABOUT ... more1-7/8" LONG AND 1-1/2" TALL WITH A KEYWAY IN BOTTOM,1/4" WIDE X 7/32" DEEP.
Buy It Now
Free Shipping Condition: Used Location: Sturgis, United States Nice vintage used Heavy-Duty USA MADE TOOL. Drilled 6" x 6" sine. Normal scratches and marks with used sine. Exactly as shown in pictures
Buy It Now
$24.75 Shipping Condition: New Location: Sonora, United States Precision ground.
Buy It Now
Free Shipping Condition: Used Location: Washington, United States
Buy It Now
$17.11 Shipping Condition: New Location: Saint Charles, United States SHARS Machinist Jack 2 pcs / 1 pair NEW. Adjustable screw & tilting swivel head. Price for 2 pieces / 1 pair. Made of heavy cast steel. Product Code. ... moreProduct features. You may ask for freight cost before buying tools.
Buy It Now
$13.55 Shipping Condition: Used Location: Clifton, United States Marked: 15-3 underneath jaw assembly.
Buy It Now
$12.99 Shipping Condition: Used Location: Lombard, United States Used condition, with dings and scratches. Overall nice shape. Please see photos for details. Thanks for looking
Buy It Now
$7.16 Shipping Condition: Used Location: New Port Richey, United States vintage machinist, drill press vise that works smoothly. There are some drill marks on the area between the jaws as pictured. They do not affect any function ... moreof the vise. It has four mounting tabs making it more universal for varied applications. Look at pictures and ask questions. Thank You for your interest.
Buy It Now
$8.50 Shipping Condition: Used Location: Dearborn Heights, United States This vise is used. You can see the condition in the photos. Jaws: 1-1/4" x 13/16". Jaw Opening Capacity: 1". We will send a new invoice each evening.
Buy It Now
$22.00 Shipping Condition: Seller refurbished Location: Sheffield, United States TOOLMAKER OWNED AND PRECISION GROUND GRINDING CUBE. MACHINIST OR TOOLMAKER TYPICALLY USED FOR GRINDING,LIGHT MILL WORK OR EVEN INSPECTION AS IT IS A PRECISION ... moreGROUND CUBE. (1) GRIND CUBE WITH (54) 10 X 32 TAPPED HOLES AS SHOWN.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States BRAND NEW Steel V Blocks With Clamp Set 1-5/8 x 1-1/4 x 1-1/4 90 Degrees Angle V-Blocks Made Of Tool Steel, Hardened And Precision Ground Chrome Steel ... moreSquare, Parallel And Concentric Maximum Diameter Of Bar: 1'' Completed With Wooden Box Unit Weight: 2 Lbs Quantity: 1 Brand turitrade MPN TR33140 Block Type V-Block Shape V Block Degree 90 Block Material Hardened Steel UPC Does not apply.
Buy It Now
$29.00 Shipping Condition: Used Location: Spokane, United States MICRO PRECISION ALBRECHT GERMANY KEYLESS CHUCK 0-1/8" WITH JACOBS 1/2" CHUCK ARBOR. SET OF MACHINIST CHUCKS. SUPER NICE SET OF MACHINIST CHUCKS TOOLS ... moreIN WOODEN BLOCK. THIS FELLOW HAD THIS SET ON HIS TOOLBOX SO WHATEVER MACHINE HE WAS WORKING AT (MILLING MACHINE ,DRILL PRESS ,OR LATHE).
Buy It Now
$20.00 Shipping Condition: Used Location: Sheffield, United States WHEEL DRESSER. SINE SLIDE DIAMOND DRESSER ON A 2" CENTER DISTANCE BETWEEN THE ROLLS. THIS IS USED ON SURFACE GRINDERS WITH MAGNETIC CHUCKS TO DRESS BOTTOMS ... moreAND SIDES OF GRINDING WHEELS AT A PRECISE ANGLE FOR PRECISE GRINDING APPLICATIONS WHEN USED WITH MAGNETIC CHUCK ON CORRECT MACHINE.
Buy It Now
$6.00 Shipping Condition: Used Location: Miami, United States Perfect for machinists and those using a Pratt & Whitney Lathe.
Buy It Now
$30.50 Shipping Condition: New – Open box Location: Wilmette, United States MACHINIST LATHE 6 1/2" Chuck Center (?). - 2" Single Arbor - 3 1/2" Extension NEW. This is an out of box lathe chuck center. I believe I am naming that ... morecorrectly. Nothing that impacts the integrity of the tool.
Buy It Now
$92.75 Shipping Condition: Used Location: Salem, United States Most individual collets both internally and externally threaded and all are round and smooth. a few are special accuracy. All collets are used but in ... moregood to very good condition. Lot also includes Hardinge SS5C stop.
|
|
Machinists SPI (Japan) Adjustable Parallel Set 3/8- 2 1/4
In box Maybe ever used maybe not sold as used HEY- take a look at the huge amount of my stuff which ships for $2.00 to 3.50-does anyone else do that? why get boned on shipping? USA USA USA. PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks ... moreagain so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@
|
|
Machinists 1/1BB BUY NOW New MT3 Live Center
See Pic In Box Perfect SEE ALL MY UNSUED BOXED MSC TOOLING IN B3 NOT China- Made In Tiawan Honest cost shipping ^^^^^^^^^^^^^^^"NO BS.Honest Shipping Charge,This Dude Is For Real" The ONLY Seller Ever To Refund On Shipping" Fast shipping. Super packing job, wish there were more sellers like you" I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" XXXXXXXXXXXXXX SEE my many ... moremany Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 ev
|
|
Machinists 1/14A BUY NOW USA MT4 Dead Center --Nice
Nice No nicks No hot spots or gouges- take a look at the huge amount of my stuff which ships for $2.00 to 3.50-does anyone else do that? why get boned on shipping? USA USA USA. PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. ... morePS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump
|
|
Machinists DS BUY NOW USA HUGE 1.5" shaft Dead Center
see all of my larger MT tools and adapters@ spins perfectly and point is excellent Important-read read read! For reasons I do not fully understand(maybe boredom. Workaholism, sleeping disorder? Im playing with"make offer" on a lot of my BIN's BUT be ADVISED that in the first 1-2 weeks Im likely not gonna accept most offers as my stuff is cheap and good to start with. Also if you feel compelled to make ridiculous stupid and/or insane offers. PLEASE get your rocks off on that one time experience as its straight to permanent residence in el blocko land and I have tons of stuff you may need in the future. KABISH? $%^&$%^&$%^$%^&$%^&$%$%^&^&$%^&$%^&$%^&$%^& SEE all the super cool rare books and calculators and slide thingies I have listed in 1/23 A honest shipping it still makes sense to combine! ... moreCheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and
|
|
Machinists 1/1/B BUY NOWUSA relieved side Mt2 Dead Center for lathe taILSTOCK
see all al drills are checked for nicks hot spots etc etc etc el cheapo shipping on all smalls@ as always.consider C.O.M.B.I.N.E.D shipping! YOU AIN'T GONNA FIND BETTER@ see pics for details. Sizes etc. as always- COMBINE SHIPPING! Safe honest cost shipping IMMEDIATELY! PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately ... morebe doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@
|
|
Machinists 1/1/B BUY NOW usa BEAUTY #4 Dead Center
el cheapo shipping on all smalls@ as always.consider C.O.M.B.I.N.E.D shipping! YOU AIN'T GONNA FIND BETTER@ see pics for details. Sizes etc. as always- COMBINE SHIPPING! Safe honest cost shipping IMMEDIATELY! PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use ... moreany one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck fla
|
|
Machinists 1/6 Buy Now nice Starrett 3" Machinists Unused MT4 x MT5 ADAPTER
ZERO USE pERFECT Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes ... moreand oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cram it all into one flat rate 5.00 envelope. I am not a for profit shipper(small club around here!I just want to clear
|
|
Machinists 1/6 Buy Now nice Starrett Machinists Unusedv MT4 x MT3 ADAPTER
ZERO USE Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs ... moreXXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cram it all into one flat rate 5.00 envelope. I am not a for profit shipper(small club around here!I just want to clear out all
|
|
Machinists 1/10B1 USA Starrett YUMMY parallel Bar set no nix no issues !!!!!!
Starrett perfection! see pix for details or email or simply call(remember that technology? eight 139261426 el cheapo shipping on all smalls@ as always.consider C.O.M.B.I.N.E.D shipping! YOU AIN'T GONNA FIND BETTER@ see pics for details. Sizes etc. as always- COMBINE SHIPPING! Safe honest cost shipping IMMEDIATELY! PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve ... moreyears with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SH
|
|
Machinists 1/14 BUY NOW Charvoz (Italian) SupernQuality Drwaing Compass
see pix for details or email or simply call(remember that technology? eight 139261426 el cheapo shipping on all smalls@ as always.consider C.O.M.B.I.N.E.D shipping! YOU AIN'T GONNA FIND BETTER@ see pics for details. Sizes etc. as always- COMBINE SHIPPING! Safe honest cost shipping IMMEDIATELY! PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You ... moreare the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no pr
|
|
Machinists 1/14 BUY NOW Srarrerr Box for Last Worde Indicator kit
Starrett see pix for details or email or simply call(remember that technology? eight 139261426 el cheapo shipping on all smalls@ as always.consider C.O.M.B.I.N.E.D shipping! YOU AIN'T GONNA FIND BETTER@ see pics for details. Sizes etc. as always- COMBINE SHIPPING! Safe honest cost shipping IMMEDIATELY! PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with ... moreEbay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide s
|
|
Machinists 1/19BB NOS Never Opened Jacobs 4 x 3 Morse Taper adapter
never opened never used find better? good luck! Find better with my real cost shipping? not a freakin chance el cheapo shipping on all smalls@ as always.consider C.O.M.B.I.N.E.D shipping! YOU AIN'T GONNA FIND BETTER@ see pics for details. Sizes etc. as always- COMBINE SHIPPING! Safe honest cost shipping IMMEDIATELY! PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve ... moreyears with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP
|
|
Machinists 1/19BB USABrown and Sharpe 1 x 2 x 4 Mag Trasfer block set
1" x 2" x 4" in oem box see pix for details or email or simply call(remember that technology? eight 139261426 el cheapo shipping on all smalls@ as always.consider C.O.M.B.I.N.E.D shipping! YOU AIN'T GONNA FIND BETTER@ see pics for details. Sizes etc. as always- COMBINE SHIPPING! Safe honest cost shipping IMMEDIATELY! PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced ... morein my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP S
|
|
Machinists 1/27BB Buy Now USA MTY4 Dead Center --Professionally repointed
USA 3 4 Dead center. Just repointed. The never used. These came from a shop that repointed their centers on top of the line cnc machineryn after 20 hrs. el cheapo shipping on all smalls@ last 2 I have I started with 30! as always.consider C.O.M.B.I.N.E.D shipping! YOU AIN'T GONNA FIND BETTER@ see pics for details. Sizes etc. as always- COMBINE SHIPPING! Safe honest cost shipping IMMEDIATELY! PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your ... moreintegriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~
|
|
Machinists 1/27BB Buy Now Brand New USA Nu thread Metric thread files NEW USA
USA tooling. Brand new. Never used Last 4 available. see pic 4 pitches el cheapo shipping on all smalls@ last 2 I have I started with 30! as always.consider C.O.M.B.I.N.E.D shipping! YOU AIN'T GONNA FIND BETTER@ see pics for details. Sizes etc. as always- COMBINE SHIPPING! Safe honest cost shipping IMMEDIATELY! PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve ... moreyears with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worl
|
|
Machinists 1/27 BUY NOW USA .900 Mandrel for Lathe
see all of these USA mandrels and stock up + combine shipping the numbers in the picture are for picture identification ONLY! see pics 4 specs Important-read read read! For reasons I do not fully understand(maybe boredom. Workaholism, sleeping disorder? Im playing with"make offer" on a lot of my BIN's BUT be ADVISED that in the first 1-2 weeks Im likely not gonna accept most offers as my stuff is cheap and good to start with. Also if you feel compelled to make ridiculous stupid and/or insane offers. PLEASE get your rocks off on that one time experience as its straight to permanent residence in el blocko land and I have tons of stuff you may need in the future. KABISH? $%^&$%^&$%^$%^&$%^&$%$%^&^&$%^&$%^&$%^&$%^& SEE all the super cool rare books and calculators and slide thingies I have ... morelisted in 1/23 A honest shipping it still makes sense to combine! Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS
|
|
Machinists 1/27 BUY NOW MT4 x Mt 3 Adapter sleeve Union Tap + Doe ( USA)
see all of these USA tools and stock up + combine shipping the numbers in the picture are for picture identification ONLY! see pics 4 specs Important-read read read! For reasons I do not fully understand(maybe boredom. Workaholism, sleeping disorder? Im playing with"make offer" on a lot of my BIN's BUT be ADVISED that in the first 1-2 weeks Im likely not gonna accept most offers as my stuff is cheap and good to start with. Also if you feel compelled to make ridiculous stupid and/or insane offers. PLEASE get your rocks off on that one time experience as its straight to permanent residence in el blocko land and I have tons of stuff you may need in the future. KABISH? $%^&$%^&$%^$%^&$%^&$%$%^&^&$%^&$%^&$%^&$%^& SEE all the super cool rare books and calculators and slide thingies I have listed ... morein 1/23 A honest shipping it still makes sense to combine! Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#
|
|
Machinists 2/27FP Buy Now USA 4 x 1/4 Circular Mill Cutter---see all !!!
see all and c-o-m-b-I-n-e shipping. All are 1" hole USA tooling. See pic 4 pitches el cheapo shipping on all smalls@ last 2 I have I started with 30! as always.consider C.O.M.B.I.N.E.D shipping! YOU AIN'T GONNA FIND BETTER@ see pics for details. Sizes etc. as always- COMBINE SHIPPING! Safe honest cost shipping IMMEDIATELY! PLEASE NOTE: THE NUMBER IN THE PICTURE IS FOR THE SELLERS REFERENCE ONLY. IT DOES NOT INDICATE THE NUMBER OF ITEMS FOR SALE! `````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced ... morein my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and tacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHE
|
|
|