|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
$17.00 Shipping Condition: Used Location: Auburn, United States Vise 1 3/4 x 4 [0pening 2 x 3/4 ]. angle set 45/40/35/30/15/10/5/4/3/2/1/ 1/2 deg. parallels 2 set 6 x 1 1/4 x 3/4.
Buy It Now
$15.50 Shipping Condition: New Location: Corona, United States Great for watch repair guys also.
$7.57 Shipping Condition: Used Location: Rochester, United States These angle plate/ blocks are as good as new. Parallel and perpendicular surfaces are true. Plates are 2-1/2" wide with one leg 4-3/4" long. ... moreAnd the other 3-1/4" long. I have 5 other PAIRS/ SETS in my other auctions. Buy more than one. And I will combine shipping cost. Please look at all of the pictures. As they are part of my description since I'm NOT an expert on everything I sell. I try to show AND describe any damage. Any questions- please feel free to email me or call me at 586-850-4221- bid confidently as I guarantee that you will be a satisfied customer. I have positive feedback for over 1100 transactions! See payment and shipping terms below. Thanks for looking. George Check out my! Be sure to add me to your! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13e5a07354c-0x104-
Buy It Now
$15.00 Shipping Condition: Used Location: Falling Waters, United States ESTATE LOT OF TOOLS BOLTS FASTNERS AND MISC. THIS IS A MIXED LOT BEING SOLD AS IS AS FOUND. PRE-OWNED MOST IN VERY GOOD CONDITION.
Buy It Now
$10.60 Shipping Condition: Used Location: Newton Upper Falls, United States Up for sale is a heavy-duty precision V-block for drilling and milling work. The block is 2" tall, 2" wide, and 2 1/2" long. It weighs 2lb, 6oz. Three ... morethreaded holes are drilled on both sides. No markings. Great condition. The photos are a crucial part of the item description. Please review them carefully. Feel free to message me with any questions. Thanks! I will always combine shipping for multiple items purchased at the same time, whenever available and applicable. Please pay for all items as you usually would. I will then combine the shipment and send you a refund for the savings.
Buy It Now
$12.99 Shipping Condition: Used Location: Lombard, United States Machinist made, some dings and scratches. Please see photos for details. Thanks for looking
$15.35 Shipping Condition: Used Location: Elgin, United States The maximum opening is 2 5/16" The vise slides in place In the user made pedestal swivel base. There is a groove milled in the side of the vise that rides ... moreon a keyway rib on the top of the pedestal base.
Buy It Now
$11.60 Shipping Condition: Used Location: Beaver Falls, United States Estate find. All need clean up from long storage, AS IS AS SHOWN. Please see my other auctions for axes. Chainsaws, logging tools, collectible tools, ... moremechanics, machinists, blacksmith, tinsmith, steampunk items, primitives, and more. US shipping/handling $10.85. We will be liquidating a large estate consisting of military items. Woodworking tools, automotive tools, machinists tools, mechanics tools, collectibles, antique and primitives and more. Please put us in your favorites you will not be disappointed. Please note. Unless noted as new, the items I am auctioning are old and/or used. Because of this, they are sold AS IS, as found, the same as in any other auction. I will try to describe these items to the best of my ability and would not misrepresent anything intentionally. I list the defects, problems and imperfections I see on the items, but I can sometimes miss something or make a mistake. I will admit that I am not an expert on everything I sell so please look at the pictures for condition and e-mail me with any questions before bidding. I try to answer every question asked, but cannot guarantee an answer if you ask the day the auction ends. All items are sold AS IS AS SHOWN. NO REFUNDS AND NO RETURNS. INTERNATIONAL BUYERS PLEASE E-MAIL FOR SHIPPING COST BEFORE BIDDING. PLEASE CHECK WITH YOUR COUNTRIES SHIPPING RESTRICTIONS BEFORE YOU BID. WE WILL NOT BE RESPONSIBLE IF ITEMS CANNOT BE LEGALLY SHIPPED TO YOU. ALSO PLEASE DO NOT ASK US TO SHOW AS A GIFT OR MISREPRESENT THE CONTENTS OR VALUE. WE WILL NOT! Please see the shipping calculator. E-bay is now charging fees on the shipping also, I normally ship via USPS or UPS. We have a handling/packaging charge of $6.00 included in our shipping charges(this is not your total shipping, you must see the shipping calculator or flat rate shipping in the item description)Our $6.00 covers packaging material and time and gas to get it to the Post Office or UPS office. PLEASE ASK SHIPPING QUESTIONS BEFORE THE AUCTION ENDS. IF YOU WOULD LIKE IT SHIPPED A DIFFERENT WAY PL
$17.90 Shipping Condition: Used Location: Ellington, United States Diamond Dresser with Holder. 1-1/2" Grind Dog. Lot of Assorted Machinists Goodies. #1 Tap Adapters. The two torque drive adapters have stuck plungers. ... moreThe other is ok. Thread Mic Standard. No Reserve!
Buy It Now
$16.38 Shipping Condition: Used Location: Waterford, United States USED, MACHINIST MADE ANGLE PLATES. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE.
1d 0h 48m 34s 0 bids
$28.00 Now
$5.95 Shipping Condition: Used Location: Crittenden, United States Vintage Jacobs No. 1A Drill Chuck Cap. 0-1/4". Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
$16.50 Shipping Condition: Used Location: Landenberg, United States The white oilstone is NEW.NOS.with a few stains. 3" Palmgren Drill Press Vise. Several nice chuck keys.New.NOS. Plenty of high resolution pictures are ... morefeatured.
Buy It Now
$18.75 Shipping Condition: New Location: Newport, United States This bid is for a vintage never used, still has the cosmoline coating on it, No.12 Palmgren bench mount machinist swivel vise. Has 2 1/2" jaws with 3" ... moreopen capacity. Very nice. Shipping is $18.75.
Buy It Now
$138.02 Shipping Condition: Used Location: Flagstaff, United States CALIFORNIA PROP 65 WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
$18.40 Shipping Condition: Used Location: Springfield, United States Machinist Tool: Lot of 4 Starrett V Blocks #567, As Found. Condition is Used. Shipped with USPS Priority Mail Medium Flat Rate Box.
Buy It Now
$6.00 Shipping Condition: Used Location: Miami, United States Perfect for machinists and those using a Pratt & Whitney Lathe.
Buy It Now
$6.00 Shipping Condition: Used Location: Miami, United States Perfect for machinists and those using a Pratt & Whitney Lathe.
Buy It Now
$6.00 Shipping Condition: Used Location: Miami, United States Perfect for machinists and those using a Pratt & Whitney Lathe.
Buy It Now
$6.00 Shipping Condition: Used Location: Miami, United States Perfect for machinists and those using a Pratt & Whitney Lathe.
Buy It Now
$6.00 Shipping Condition: Used Location: Miami, United States Perfect for machinists and those using a Pratt & Whitney Lathe.
Buy It Now
$6.00 Shipping Condition: Used Location: Miami, United States Perfect for machinists and those using a Pratt & Whitney Lathe.
Buy It Now
$6.00 Shipping Condition: Used Location: Miami, United States Perfect for machinists and those using a Pratt & Whitney Lathe.
Buy It Now
$6.00 Shipping Condition: Used Location: Miami, United States Perfect for machinists and those using a Pratt & Whitney Lathe.
Buy It Now
$6.00 Shipping Condition: Used Location: Miami, United States Perfect for machinists and those using a Pratt & Whitney Lathe.
Buy It Now
$6.00 Shipping Condition: Used Location: Miami, United States Perfect for machinists and those using a Pratt & Whitney Lathe.
Buy It Now
$6.00 Shipping Condition: Used Location: Miami, United States Perfect for machinists and those using a Pratt & Whitney Lathe.
Buy It Now
$6.00 Shipping Condition: Used Location: Miami, United States Perfect for machinists and those using a Pratt & Whitney Lathe.
Buy It Now
Free Shipping Condition: Used Location: Springboro, United States
Buy It Now
$10.40 Shipping Condition: New Location: Howell, United States "QUADRALLEL". This device is the result of years of "There has to be a better way" frustration, creative thinking, and the vision of one of the finest ... moreCraftsman / Inventor the industry has ever seen.
Buy It Now
$8.58 Shipping Condition: New Location: Orland Park, United States BRASS or BRONZE SHIMS VICE JAWS MACHINIST TOOLS.187- 010 THICK Condition/I n fo/Sizes: Most pieces are slightly curved. All my tool auctions come with ... moresatisfaction guarantee. EZ returns; y ou can return any tool you are not happy with. The scale in the photo(if shown) is for reference only and not included in this auction and all items are used and engraved unless otherwise noted. There may be imperfections that I did not detect. I will also combine shipping to save you money. Items must be won in the same week for a combined shipping discount. Notify me if you plan on bidding on multiple auctions. Payment due within 3 days of auction close unless other arrangements are made with me before the auction closes. Foreign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured. Check out my other items! Be sure to add me to your favorites list! Art(ie) your best chance for a great deal on eBay. All auctions open at 99 cents, never a reserve, and always a money back guarantee!
Buy It Now
$18.40 Shipping Condition: Used Location: Morris Plains, United States NO EXCEPTIONS.
Buy It Now
$23.48 Shipping Condition: Used Location: Jamestown, United States 1920 antique machinists lathe collet chucks. 18 pieces total.
Buy It Now
$7.57 Shipping Condition: Used Location: South Berwick, United States
Buy It Now
$16.38 Shipping Condition: Used Location: Waterford, United States LOOK AT THE PICTURES. NO WARRANTIES GIVEN OR IMPLIED.
$12.50 Shipping Condition: Used Location: North Easton, United States Schultes Level, Inc.
Buy It Now
$79.55 Shipping Condition: Used Location: Watsontown, United States This pair of keyed 90 degree setup blocks by Taft-Peirce is perfect for precision machining tasks. Made in the United States, these angle plates are ideal ... morefor use in a variety of industrial settings. The brand is known for producing high-quality tools that are durable and reliable.The item type is an angle plate and the plate type is also an angle plate. The sizes of the blocks are shown in the pictures and the model number is 201. Whether you're a professional machinist or a hobbyist, these setup blocks are a great addition to your toolbox.
Buy It Now
Free Shipping Condition: Used Location: Sturgis, United States Machinist Tool set of 2 Approximately 3 1/2" x 4 1/4" x 4 1/4", Free shipping included with vintage Tools. I'm guessing 1/4" holes & threads? Overall ... morenice condition with normal scratches and marks. Size shown in pictures.
Buy It Now
Free Shipping Condition: Used Location: Sturgis, United States Nice large older vise in good working condition. Some stains and marks as shown in pictures but overall great tool. Heavy-Duty over 25 lbs plus some spacer ... morestock included. Free flat rate shipping included. 6" opening. 5" wide jaws. 9 1/4" overall length.
Buy It Now
$10.95 Shipping Condition: Used Location: Roseburg, United States Lot Of 4 JACOBS Ball Bearing Drill Chucks Machinist Tools No. 34, 2A, (2) Multi-Craft JACOBS Ball Bearing Drill Chucks. Chucks are in good working condition. ... more2A 0-3/8”, 0-10 mm, 2 Taper. 2 Keys – No key for the 2A.
Buy It Now
$7.99 Shipping Condition: Used Location: Indialantic, United States Quality USA made tools.
Buy It Now
$16.38 Shipping Condition: Used Location: Waterford, United States USED, HOLD DOWNS. LOOK AT THE PICTURES.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Made of high quality casting steel for long life and increased durability. All parts heat treated. 1/2" T-Slot, 3/8-16 stud size, & 1" step block ... morewidth (all standard). Contains (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long. Also contains (4) coupling nuts, (6) forged steel step clamps (2 each based on stud sets), (12) steel step blocks, (6) flange nuts, (6) T-nuts, & wall holder. Description：.
Buy It Now
$18.40 Shipping Condition: Used Location: Tewksbury, United States For sale is a lot of 90+ DA100 Collets, mostly Erickson, dirty/tarnished from age/use. Various sizes, 16ths, 32nds, 64ths.
Buy It Now
$9.51 Shipping Condition: Used Location: Waterford, United States USED, PARALLELS. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES.
Buy It Now
$9.50 Shipping Condition: Used Location: Dearborn Heights, United States This block is used. You can see the condition in the photos. We will send a new invoice each evening. Weight: 2-1/2 lbs.
Free Shipping Condition: Used Location: Portland, United States THIS DRILL VISE IS IN GOOD SOLID USED CONDITION IT DOES SHOW WEAR DUE TO AGE, STORAGE AND USE THE JAWS ARE 2 3/4 IN. WIDE TOTAL LENGTH OF VISE IS 8 IN.
Buy It Now
$15.00 Shipping Condition: Used Location: Sheffield, United States BLOCKS ANGLE(4) THE 2 AT TOP ARE THIN(1/16" AND 45* AND 60* AS SHOWN. NOT HARD. BOTTOM LEFT IS A 2* HARDENED AND PRECISION GROUND. LAST IS A 30* ... moreSPECIALTY ANGLE BLOCK THAT HAS BEEN RE-GROUND TO 25* BEST SEEN IN PICTURES#6.7,8. BOTH ANGLES PARTIALLY REMAIN AS SHOWN. BLOCK IS HARDENED AND PRECISION GROUND VERY NICELY DONE! BLOCK HAS(5) TAPPED#10 X 32 HOLES AND(5) 8 X 32 THRU HOLES ALL IN GREAT SHAPE COMES AS SHOWN. BLOCK ALSO HAS A SLOT THAT IS.395" WIDE X 1.070" LONG. PLEASE LOOK. USA AMERICAN TOOLMAKER MADE& OWNED BY A 40+ YEAR TOOLMAKER. THANKS FOR LOOKING! PLEASE CHECK MORE OF OUR STORE WE HAVE MANY VERY HARD TO FIND ITEMS! PLEASE TAKE A MINUTE TO LOOK AND OR ZOOM PICTURES ALL 12 WORK! ALL SIDES AND ENDS ARE SHOWN. I WILL BE LISTING MANY PARALLELS AND SETS OF PARALLELS PLUS BLOCKS SINE PLATES AND ANGLE PLATES PLEASE KEEP WATCHING! THANKS FOR LOOKING! You will now need to inform me if you want insured shipping. So that I can add it to your order before you check out, thanks. We strongly suggest insured shipping, because of lost and possible damage to packages. For multiple purchases ending within 3 days of each other please hold payment for invoice, to receive combined shipping discount. COMBINED SHIPPING TERMS BELOW I will combine shipping on multiple purchases(within 3 days of each other)full price shipping for first(and/or highest listed or calculated shipping of items purchased) $3.00 each addl item per ebay guidelines. Please wait for final invoice when done bidding. FREE SHIPPING APPLIES TO ONE FREE SHIP ITEM. $3.00 EACH ADDL free ship ITEM. Returns must be received back by us in the exact same condition as you received them(all accessories and boxes included as sent to you) Returns/exchanges must be received within 14 days of your winning bid. We are glad to refund any purchase but we are sorry there is a 15% restocking fee. Include your name. Address, item# daytime telephone# how you paid, and if you are requesting a refund or exchange. I HAVE MANY MANY MORE PARALLELS. PAR
Buy It Now
$9.99 Shipping Condition: Used Location: Hamilton, United States
Buy It Now
$9.99 Shipping Condition: Used Location: Chicago Ridge, United States Chicago Tools Eng Co. Used Condition. Check the pictures for more details.
Buy It Now
$28.50 Shipping Condition: Used Location: Sheffield, United States THRU HOLES AND COUNTER-BORES ARE.328" THRU WITH A. 45" COUNTERBORE IN LARGE SLOT IN WIDEST VEE AS SHOWN. VEE'S ARE ABOUT 1.04" WIDE. 48" WIDE AND. 10" ... moreWIDE. THIS IS ONE HANDY CUBE WITH ALL THE TAPPED HOLES AND THRU HOLES WITH COUNTER-BORES TO BOLT TO AN ANGLE PLATE OR AS NEEDED!
Buy It Now
$14.99 Shipping Condition: Used Location: Morris Plains, United States NO EXCEPTIONS.
$15.10 Shipping Condition: Used Location: Sunbury, United States The large one measures in 6" diameter and the two small ones measure 4-7/8". The numbers on each of the small ones is: 37, 39, 41, 43, 47, 49 // 21, 23, ... more27, 29, 31, 33. The large one is: 62, 64, 72, 78, 80, 84, 90, 96, 100, 120. These are used. Not by me. I will try to answer any questions to the best of my ability.
4d 0h 6m 35s 0 bids
$39.99 Now
$10.99 Shipping Condition: Used Location: Athol, United States Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal ... more0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 UP FOR AUCTION: PRECISION MACHINIST TOOLS LOT OF 4 V BLOCKS FOR SET UP WITH 1 CLAMP TOTAL 5 PIECES VARIOUS SIZES RULER SHOWN NEXT TO PIECES TO DETERMINE SIZE*PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE* I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE IF I HAVE THE ANSWER AND WILL TRY TO WORK WITH YOU AS BEST I CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR PURCHASES. LOOK AT OUR EBAY FEEDBACKS. AUCTION WINNER CAN CONTACT ME DIRECTLY IF THERE IS A PROBLEM. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. Purchases over $80 should be insured to guarantee delivery. We are willing to ship anywhere! Please refer to USPS website for exact pricing from area code 07005. We try to use flat rate boxes when possible. Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated.
Buy It Now
$11.00 Shipping Condition: Used Location: Huntington Beach, United States 9 Pc R8 Collet Set 1/4" to 3/4" for Bridgeport Mill
Buy It Now
$19.25 Shipping Condition: Used Location: Newington, United States Net weight 3 lbs. Unmark block (one eye etching) weighs 1 lb.
Buy It Now
$14.99 Shipping Condition: Used Location: Morris Plains, United States NO EXCEPTIONS.
Buy It Now
$10.40 Shipping Condition: Used Location: New Palestine, United States Machinist/Tool Maker Made Grinding Vise. 1-11/16” Wide Jaws. 3/4” Deep Jaws.
Buy It Now
$4.31 Shipping Condition: New Location: Paris, United States SET OF STEEL 2 MINI MACHINIST CLAMPS, MADE OF STEEL, OUTSIDE EDGES LEFT WITH RAW MATERIAL FINISH, CLAMPING SIDES GROUND FLAT AND PARALLEL. MADE IN THE ... moreUSA. DRAWING IS NOT INCLUDED JUST THERE FOR SIZE REFERENCE. Size aproxiamtely .49×.5×2.0. Slot clearnce for 1/4-20 Bolt, Drilled and Tapped 1/4-20.
Buy It Now
$24.75 Shipping Condition: Used Location: Morris Plains, United States PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT ... moreUNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.
Buy It Now
$18.40 Shipping Condition: Used Location: Morris Plains, United States NO EXCEPTIONS.
|
|
|
|
Machinist Tools-Metal Lathe Tail Stock-6 Dead Centers-2 Live-Other Items & Parts
I recently obtained metal lathe related tools and accessories which I will be listing in several auctions. Items include several sets of chuck jaws. Steady rest, tool cutting bits, tool holders, live and dead centers and a vise. These are all for small to mid size lathes. I do not know the make of lathes these items originally came from, many items can fit a variety of different lathes. These items are all used in useable condition showing normal wear and usage. I can combine shipping on most of these items and due to weight I will use USPS flat rate priority boxes to ship if this is the cheapest and items will fit. View photos and measurements provided for condition and to see if items meet your needs. This listing is for the following: This listing is for 14 metal lathe related items mostly for small or mid size lathes. Most of these are ... morefor use in a tailstock. There are 6 dead centers. 2 live centers and 6 other items for holding drills and parts and for other purpose items. View photos for content of this lot. This lot sells without reserve and“as is” I do not take offers after the auction ends on items that do not sell. If you are interested in this lot, make a bid. This lot ships with a USPS tracking number, buyer may request insurance. I DO NOT SHIP OUT OF THE UNITED STATES. RETURN POLICY* On items I sell I try to provide as much descriptive and photographic information on condition. Size, known damage and what it is you are buying as my space and knowledge will allow. I try to provide as accurate information as possible and will try to answer additional questions when asked, if possible. If an item is listed as untested or unknown if item works, it is usually because I have no ability or means of testing it, not that the item does not work, it means I do not know. For this reason if an item is listed as selling“as is” there is no return of this item unless I have made a major error in its description. I have no desire to deceive my buyers and I also have no desire to be taken advantage of by
|
|
|
MOHAWK TOOLS JARNO SHANK CARBIDE TIPPED CENTER 09 SHANK -MACHINIST/TOOL MAKER
MOHAWK TOOLS CENTERS- In Original Package JARNO Shank Type- Carbide Tipped 09 Shank No 0.40" Diameter 2.00 Proj. Length 6-1/2" Overall Length $35.00 ea or Best Offer US SHIPING VIA UPS GROUND TRANSPORTATION LOCAL Pick-Up Available PayPal Only. Please email Seller with any Questions.
|
|
|
LATHE MILL MACHINIST TOOLS VERY LARGE Ready Tool Live Center G50 Retail $595
THIS WILL BE SHIPPED IN A PRIORITY MEDIUM FLAT RATE BOX FOR $11.50(USA SHIPPING COST) PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. Ready Tool live center G- 50. Retail price for this is $595.00. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS ... moreOR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID. ALSO, I CHARGE 5 DOLLARS HANDLING TO COVER PACKING MATEREIALS AND OR INSURANCE. I ONLY SHIP VIA PRIORITY. I DO SHIP INTERNATIONALLY BUT WILL NOT LIE ON THE CUSTOMS FORM. THE ITEM WILL BE PUT DOWN FOR WHAT THE ITEM COSTS.
|
|
|
MACHINIST TOOLS LATHE MILL *LARGE LIVE CENTER BIT MORSE TAPER*
UP FOR AUCTION PRECISION MACHINIST TOOLS& PARTS LARGE LIVE CENTER BIT MORSE TAPER- please refer to pictures for measurements* PLEASE REFER TO ALL PICTURES TO SEE CONDITION* Came from a very well maintained shop. All tools were cared for by a seasoned professional machinist. Being SOLD AS IS– Do not know much about machinist tools but will try to describe as best I can. I am in the learning process. So any feedback will be appreciated. PLEASE REFER TO ALL PICTURES TO SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE· I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS ... moreAS SOON AS POSSIBLE AND WILL TRY TO WORK WITH YOU AS BEST I CAN. SERIOUS INQUIRIES ONLY. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. Purchases over $80 should be insured to guarantee delivery. We are willing to ship anywhere! Please refer to USPS website for exact pricing from area code 07005. No RETURNS.
|
|
|
Machinist Tools Skoda Live Center; No.4 Taper
This is a very nice Skoda live center No. 4-CSN-243324. Made in the Czech Republic. I do believe this to be a No.4 taper. It appears in good usable condition. Thank you for your time, please email with any questions and have a wonderful day.
|
|
|
MACHINIST TOOLS LATHE FALLS LIVE CENTER 2MT
MACHINIST TOOLS LATHE FALLS LIVE CENTER 2MT CONDITION: Normal Wear and Tear– See Pictures GOOD WORKING CONDITION Discounts– This only applies to items displaying this promotion. You must WAIT for an INVOICE to get these discounts. Items must be purchased on the same day. Buy 2 items 3% Discount Buy 3 items 5% Discount Buy 4 items 7% Discount Buy 5 items 10% Discount Will Combine Shipping Please e-mail with questions
|
|
|
Bruckner Live Lathe Center #2MT- Machinist tools
Used Bruckner live center with#2 Morse taper. 6” overall length, 60deg. Point. Very good condition with some very small dings. The center spins smoothly. Please check out the drill bits I have listed. FREE SHIPPING!
|
|
|
Lot of 5 Assorted Machinist Tools Dead Centers
| Lot of 5 Assorted Machinist Tools Dead Centers, Lot of 5 Assorted Machinist Tools Dead Centers Lot of 5 assorted machinist dead centers. Look below for images. Thanks, Paul C W1VLF Please e-mail if you need additional information or other pictures. Shipping is NOT included unless specified in the listing. Our preferred method of shipping is USPS Priority Mail for packages under 2 lbs. and UPS Ground for larger items. This may vary with the item or with your location. Insurance for First Class or Priority Mail shipments will not be included unless you request it. Click here to check out our other auctions. Thank you and good luck bidding! By the way. We now have a store! Click to View Image Album Click to View Image Album Click to View Image Album Payment, I accept the following forms of payment: PayPal Shipping& Handling, $12.00 USPS ... morePriority Mail® FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Make your listings stand out with FREE Vendio custom templates! FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE counters from Vendio today!
|
|
|
1 Live Center and 1 Dead center for Lathe MACHINIST TOOLS LATHE MILL
1 Live Center for Lathe and 1 Used Carbide Tipped Dead Center With Morse Taper#2 For Grinder or Lathe. Please take a look at all pictures. What you see in the pictures is what you will receive. I am not a expert in the metalworking/milling/machining industry. But we do my best to describe the item I'm selling and the condition that it's in. Parts are listed with part numbers when available- please do your research before bidding. CHECK MY OTHER LISTING FOR MORE TOOLS AND AUTO-PARTS! Thank You.
|
|
|
SKODA Precision Heavy Duty Live Center Set - Morse Taper: 3 MT Machinist Tools
For your consideration Skoda Morse taper#3 live center set. I have listed this set as used only because it is not new and has been in storage for many years. This set is complete and in unused condition. Set includes live center with 7 different tips and 1 unused still in the bag wedge- taper tool to remove the interchangable tips. This set is like new- unused condition except for a few small spots of surface rust(see last 3 pictures) I have removed surface rust with 4 ot steel wool and WD-40. The small pitted rust areas that remain seem to be where the tool was touching the wood storage box. These spots are cosmetic only and will not effect this tool. Label on box states made in the Czech Republic. Free shipping quote is for lower 48 USA only. Thank you for looking.
|
|
|
MACHINIST TOOLS LOT OF 2 DEAD CENTERS FOR LATHE MILL GRINDER
UP FOR AUCTION: PRECISION MACHINIST TOOLS& PARTS MACHINIST TOOLS LOT OF 2 DEAD CENTERS FOR LATHE MILL GRINDER*PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE. Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE IF I HAVE THE ANSWER AND WILL TRY TO WORK WITH YOU AS BEST I CAN. ... moreWE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR PURCHASES. LOOK AT OUR EBAY FEEDBACKS. AUCTION WINNER CAN CONTACT ME DIRECTLY IF THERE IS A PROBLEM. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. Purchases over $80 should be insured to guarantee delivery. We are willing to ship anywhere! Please refer to USPS website for exact pricing from area code 07005. We try to use flat rate boxes when possible.
|
|
|
ROHM Precision Live Center Set - Morse Taper # 2 Machinist Tools - Lathe-Germany
For your consideration 1 Rohm precision Morse taper#2 live center set in very good condition. Stanped on tool body reads Rohm 102 A MK2 Made in Germany. The bearing operates freely and smoothly just as you would expect from a premium grade tool. This 8 piece set currently is listed on Amazon for $680.00 Also included is a 1" diameter to morse taper#2 adapter sleeve. I am not the original owner of this set; however I believe it was used in a shop environment. All of the inserts have some normal wear. The main tool body has some dings on it. The original wooden finger jointed box is dirty and has some black marker writing on the right side. see pictures) Please feel free to ask questions. Thank you.
|
|
|
MACHINIST TOOLS LATHE NICE Concentric LIVE Center in Wood Box ~ Morse Taper 3
Concentric Spring Loaded Live Center Manufactured by Concentric Tool Corp. Pasadena. Calif. 91106. Morse Taper#3. 3M.P-4995 is engraved on the end of the tool. Box and tool are in very good condition. There is a small area of light surface rust which could probably be buffed off.
|
|
|
SKODA Precision Heavy Duty Live Center Set - Morse Taper: 4 MT Machinist Tools
For your consideration 1 Skoda Morse taper#4 live center set in very good- excellent used condition. Some of the tips show some very light use. And the wedge to remove the tips is shop made, not the original. The black body of the tool has some ding- marks they are cosmetic only and will not effect the performance of the tool. see pictures) Set includes smooth operating live center with 7 different tips and wedge- taper tool to remove the interchangable tips. Box is in very good condition. The Morse taper shank is clean and blemish free. I will wrap all parts and box separately so no damage will occur in shipping. Thank you for looking.
|
|
|
21122 live center & morse w&b #1 center & other center lathe machinist tools lot
21122 live center& morse w&b#1 center& other center lathe machinist tools lot CLICK ON THE PICTURES FOR CLOSE PICTURES.THE PICTURES USUALLY TELL THE CONDITION BETTER THAN I CAN DESCRIBE IT. the live center is marked 21122.it may be craftsman. They do have a number 21122 live center but the craftsman name cant be seen.most of the dark areas are from storage and i do see what looks like the protective film that comes on these, it appearsto be on the bearing.i think most of the dark areas is dirt and stuck on stains.bearings turn very nicely.the shank looks like a# 1 morse size.other centers are: morse#1 w& b.this one looks nice, minor cosmetic wear.another#1 is not readable or unmarked.it has some pitting and rust but still usable.could clean some rust off.larger is also unreadable with pitting.still nice lot of usable tools. ... moreI WILL COMBINE SHIPPING WHERE POSSIBLE PUERTO RICO. ALASKA AND HAWAII SHIPPING MAY BE HIGHER ON SOME ITEMS IF THEY ARE LARGER PLEASE EMAIL FOR PRICE INTERNATIONAL BUYERS PLEASE EMAIL FOR SHIPPING BUYERS ARE RESPONSIBLE FOR TAXES AND DUTY FOR THERE COUNTRY. SOMETIMES ITEMS ARE HELD UP IN CUSTOMS AND CAN TAKE A LITTLE LONGER AT TIMES TO RECEIVE YOUR PACKAGE. INTERNATIONAL BUYERS PLEASE DON'T ASK ME TO LIE ON THE CUSTOMS FORM.I WILL ONLY PUT ACTUAL SALE PRICE AND ACTUAL CONTENTS ON IT. NO EXCEPTIONS. INTERNATIONAL BUYERS ARE ALSO RESPONSIBLE FOR KNOWING IF YOU NEED AN IMPORT LICENSE FOR THE ITEM YOU ARE BUYING OR IF IT IS PROHIBITED TO YOUR COUNTRY. ANY REFUNDS GIVEN WILL BE MINUS SHIPPING COSTS.THE ONLY REASON ACCEPTED FOR RETURN IS IF A MISTAKE WAS MADE IN THE DESCRIPTION. IF YOU HAVE A PROBLEM WITH YOUR PURCHASE. PLEASE LET ME KNOW BEFORE YOU LEAVE A NEGATIVE.IT IS BEST TO SEND A NICE EMAIL AND NOT A NASTY ONE.NICE EMAILS GET BETTER ACTION.
|
|
|
NICE ASSORTED LOT OF 7 DEAD CENTERS MACHINIST TOOLS LATHE MILL
UP FOR AUCTION: MACHINIST TOOLS& PARTS LOT OF 7 DEAD CENTERS ZOOM IN FOR ALL INFORMATION. PICTURES SHOW RULER TO DETERMINE SIZE. PLEASE REFER TO ALL PICTURES TO SEE CONDITION& SEE EXACTLY WHAT IS INCLUDED IN YOUR PURCHASE. Being SOLD AS IS– Do not know much about machinist tools but describe as best I can. I am in the learning process. IF LISTING IS INCORRECT PLEASE CONTACT US, any feedback will be appreciated. I will combine shipping for more than one purchase. Please look at our other listings we have a large array of machinist tools up for auction and we add new items every week. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE. OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AS SOON AS POSSIBLE IF I HAVE THE ANSWER AND WILL TRY TO WORK WITH ... moreYOU AS BEST I CAN. WE ALWAYS TAKE GREAT CARE IN PACKING& SHIPPING YOUR PURCHASES. LOOK AT OUR EBAY FEEDBACKS. AUCTION WINNER CAN CONTACT ME DIRECTLY IF THERE IS A PROBLEM. Please wait until auction has ended and invoice has been received to confirm all costs to buyer. Purchases over $80 should be insured to guarantee delivery. We are willing to ship anywhere! Please refer to USPS website for exact pricing from area code 07005. We try to use flat rate boxes when possible.
|
|
|
LOT OF MISCELLANEOUS MACHINIST TOOLS KNURLING TOOLING HOLDER CENTER
Up for sale is a lot of misc machinist tools and tooling metal.These items are in good usable condition and may contain cosmetic rust and blemishes.They also will show signs of regular usage,scratches,knicks etc. 1 = large tooling holder. 1 = small tooling holder Champian with a wrench. 1 = Armstrong knurling tool This has been modified by previous owner(see pic) 1 = boring bar. 1 = small arbor 1 = homemade tooling holder. 1 = center. Large and small tooling Big Daddys vintage tools is a small individually ran company located in Baldwinville Massachusetts. I mostly sell vintage machine parts but you will also find various other items. I am a part time seller and sell from a store rather than auctions. I find it easier to manage store selling than bulk auctions. Starting in June 2012 I will be dropped from some searches. So please if you like ... morewhat I sell save me in your favorites. I can not offer one day shipping or 14 day free return shipping. I sell vintage machine parts and various other items purchased at auctions.Estate sales and yard sales. I do my best to tell the truth and honor my mistakes. There have been no items were I refused a full refund including return shipping when I have made a mistake. I find most all buyers just want what they bought. But for what I sell I am going to continue with my policy of 5 days. That is please contact me if there is a problem within 5 days. I give some slack because if you get a item on a Monday you might not get a chance to really check it out until Saturday if your working. Please then contact me so we can resolve the issue. Shipping please read: Shipping is a necessary evil nobody likes to pay it. However it is necessary and for what I sell. I must charge shipping! I try to keep the cost down and do not charge a packaging fee. Some time back the host started charging a finale value fee on shipping. This means they collect a percentage of the shipping cost besides the standard item cost. On a smaller USPS Priority mail item the cost is really not effected, any di
|
|
|
LOT OF 25 MACHINIST LATHE SET UP BLOCKS step up tools CARR LANE - CAD - Do-ALL
Lot of 25 Set Up Blocks CAD. Carr Lane, Tietzmann, Do ALL, Other Various sizes from 1" to 4" Powered by The free listing tool. List your items fast and easy and manage your active items. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-148a21bfbaf-0x106-
|
|
|
Machinist Tools Tool Lathe live Center Bruckner Brand #4 Morse Taper
One only Used Lathe Live Center. Bruckner Brand, with a#4 Morse Taper. Also has a lubrication fitting. Very good solid lathe center. Starrett scale is for reference only and does not go with the item.
|
|
|
machinist tools,4MT live centers
2) 4MT live centers. Neither one is real smooth but both can be rebuilt
|
|
|
Lot of Metal Lathe Centers Milling Machinist Gunsmith Tools
This is a nice lot of machinist metal lathe tools and accessories. These belonged to a local machinist. Gunsmith, and knife maker who recently passed away. I don't know much about these. A couple of them are marked No. 3 and they all fit the same insert. I believe they all are no. 3's. They all seem to work ok, but they do need a little cleaning. Satisfaction guaranteed. We would like payment within 2 days please. Shipping is $12.00.
|
|
|
Marveco Live center cone for lathe machinist toolmakers tools
Check out our Ebay page for more great machinist items/tools. MT5 Please see pictures for additional information. For Global Shipping: Please review fees and policies for International buyers before bidding. We don't control fees that Ebay Global Shipping charges. Combined shipping is offered for multiple orders. Additional 3-5 handling days. If you have questions about our items please feel free to message us. Thank you and have a great day! We are willing to adjust shipping to save money to a different USPS service. Please message us with the shipping service FROM USPS that you desire and we will gladly refigure the invoice. H A P P Y B I D D I N G! Item Code A-86
|
|
|
MT5 & MT6 DEAD CENTER LATHE MACHINIST TOOLS
MT5& MT6 DEAD CENTER LATHE MACHINIST TOOLS THE POINTS ARE IN EXCELLENT CONDITION. I DON'T KNOW MUCH ABOUT MACHINING EQUIPMENT. I BELIEVE BOTH TO BE IN VERY GOOD CONDITION. GOOD LUCK. SHIPPING& HANDLING USA FREE.
|
|
|
MACHINIST TOOLS LATHE MILL Levin Jewelers Watchmaker s Lathe Live Center
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.
|
|
|
Roofe Inc XHD-5a LIVE CENTER machinist toolmakers tools MT5 c54
MT5 Check out our Ebay page for more great machinist items/tools. Please see pictures for additional information. For Global Shipping: Please review fees and policies for International buyers before bidding. We don't control fees that Ebay Global Shipping charges. Combined shipping is offered for multiple orders. Additional 3-5 handling days. If you have questions about our items please feel free to message us. Thank you and have a great day! We are willing to adjust shipping to save money to a different USPS service. Please message us with the shipping service FROM USPS that you desire and we will gladly refigure the invoice. H A P P Y B I D D I N G! Item Code A-54
|
|
|
Machinist Tools Dead Centers 2 Female 3 Male Solid Carbide 3/8 Diameter
Machinist Tooling Dead Centers
|
|
 |