|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: Mentor, United States 1 NEW BULL NOSE LIVE LATHE CENTER. HEAVY DUTY. #2 MORSE TAPER. We describe our tooling as it is, we do not hide anything. OVERALL LENGTH FROM ONE END ... moreTO THE OTHER IS ABOUT 5-1/2".
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature: Hardened And Ground. High Quality Dead Center. Specifications： Shank Size: Morse Taper #2 Center Point: 60 degree Overall Length: 3-7/8'' Long ... moreTIR: +/- .0002" Unit Dim L x W x H (in): 1/2 x 1/2 x 3-7/8 *Estimated* Unit Weight: 6 Ounce Quantity: 1 Note: Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. .
Buy It Now
Free Shipping Condition: New Location: Madison Heights, United States MADE OF HARDENED TOOL STEEL AND GROUND FOR HIGH ACCURACY. PARTS ARE SEALED CONCENTRICITY: 0.0002".
Buy It Now
Free Shipping Condition: New Location: Chino, United States Feature: Hardened And Ground. High Quality Dead Center. Specifications： Shank Size: Morse Taper #2 Center Point: 60 degree Overall Length: 3-7/8'' Long ... moreTIR: +/- .0002" Unit Dim L x W x H (in): 1/2 x 1/2 x 3-7/8 *Estimated* Unit Weight: 6 Ounce Quantity: 1 Note: Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. .
Buy It Now
Free Shipping Condition: New Location: Mentor, United States 1 NEW MT2 SINGLE POINT DEAD CENTER. (HALF NOTCHED). 60 DEGREE. MORSE TAPER 2. We describe our tooling as it is, we do not hide anything. WHAT IS SHOWN ... moreIN MY PICTURE IS THE ITEM YOU ARE BUYING. TAKE A GOOD LOOK.
Buy It Now
$10.00 Shipping Condition: Used Location: El Monte, United States
Buy It Now
$16.38 Shipping Condition: Used Location: Waterford, United States THE CENTER TURNS OK. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. NO WARRANTIES GIVEN OR IMPLIED.
Buy It Now
$12.45 Shipping Condition: New – Open box Location: Fremont, United States CENTER CASE WITH 5/16" SHANK. MADE OF ZINC. FOR 2-POINT LOCK KITS.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Feature: Hardened And Ground. High Quality Dead Center. Specifications： Shank Size: Morse Taper #2 Center Point: 60 degree Overall Length: 3-7/8'' Long ... moreTIR: +/- .0002" Unit Dim L x W x H (in): 1/2 x 1/2 x 3-7/8 *Estimated* Unit Weight: 6 Ounce Quantity: 1 Note: Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. .
Buy It Now
$27.00 Shipping Condition: Used Location: Sheffield, United States This live center set is a top-quality product from CONZELLA, made in Germany. The precision and quality of this live center set are unmatched, providing ... moreexcellent support for your machining projects.
Buy It Now
Free Shipping Condition: New Location: United States 6.7 in / 170 mm Milling Machine Worktable. The drill press table will be more convenient to adjust the tightness of the worktable with a number of bolts ... moreand nuts. Worktable length: 17.7 in / 450 mm. Worktable width: 6.7 in / 170 mm.
Buy It Now
Free Shipping Condition: New Location: Mentor, United States 1 NEW MT2 SINGLE POINT DEAD CENTER. 60 DEGREE. MORSE TAPER 2. We describe our tooling as it is, we do not hide anything. WHAT IS SHOWN IN MY PICTURE IS ... moreTHE ITEM YOU ARE BUYING. TAKE A GOOD LOOK. YOU CAN READ THE LABEL.
Buy It Now
Free Shipping Condition: New Location: Monrovia, United States Morse Taper 2. Hardened And Ground To Closest Tolerances. 60 Degree Center Point. Material: High Carbon Steel.
Buy It Now
Free Shipping Condition: New Location: Farmington, United States Item: Machine Chuck. Type: Scroll. For Use With: Adapter Plate. Item Number: 1-105-0600. Gripping Range Internal: 1.65 - 5.75.
Buy It Now
Free Shipping Condition: New Location: Farmington, United States Riten Item Number: 72202. Manufacturer: Riten. Available Points Steel Half Dead Center. Series Dead Center. Material Hardened Tool Steel.
Buy It Now
Free Shipping Condition: New Location: High Point, United States Body hardened and ground.
Buy It Now
Free Shipping Condition: New Location: Monrovia, United States 60 Degree Point. High Quality Dead Center. Hardened And Ground.
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States Shars MT2 CNC Live Center Set 2MT 741Lbs 3200RPM Triple Bearing. 0006” TIR with Certificate New. SHANK SIZE Morse Taper 2. Body made of special tool steel ... morehardened and ground with special taper mount for quick change of points.
$17.90 Shipping Condition: Used Location: Ellington, United States Carr-Lane & Vlier. Assorted Type "C" Spring Stop Buttons. (23) CL-30-SSB 1/4" Stroke. (2) CL-20-SSB 3/16" Stroke. + SHC Screws, & Few Parts Only Buttons. ... more- Flat Face & Flat w/ Tang. Lot of 25 +.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States The K72 lathe machine chuck works with few vibrations, ensuring you will get accurate finished parts. It features a wide clamping range and high precision. ... moreSo you can deal with a variety of materials after fastening it with a single T handle.
Buy It Now
$12.00 Shipping Condition: Used Location: Bayonne, United States Live Center with Notched Point and Adapter MT2-3. Very good, used condition (see photos); shows normal signs of use. (3331) You are purchasing what is ... moreshown in photos only. All photos are of the actual product(s) you will receive and are intended to help describe the quality and condition of the piece(s).
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States Morse Taper #2. High Quality Dead Center. Center Point Unit Weight Unit Dim L x W x H (in) Shank Size 3-7/8" Long. Hardened And Ground.
Buy It Now
Free Shipping Condition: New Location: Monrovia, United States 60 Degree Point. High Quality Dead Center.
Buy It Now
$21.10 Shipping Condition: Used Location: Bremen, United States W/ 2 Drill Chucks & key and 1 Live Center QUICK INDEX. TURRET TOOL HOLDER. This is in good used condition. See pictures for drill chuck sizes.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description?? #1 Morse Taper (1MT) shank, 60-degree point 0.0002" Concentricity 5000 Max RPM 12-28 NF Drawbar Thread Hardened to 61-65 Rockwell Features?? ... moreHigh quality triple bearing design (bearings are immersed & sealed) Made of precision ground hardened steel for high accuracy! Great for high speed turning, CNC work Package Included : 1 * MT1 Live Center Morse Taper Note:.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification: #3 Morse Taper (3MT) shank, 60-degree point 0.0003" Concentricity 4000 Max RPM Hardened to 61-65 Rockwell Features： High quality triple ... morebearing design (bearings are immersed & sealed) Made of precision ground hardened steel for high accuracy! Great for high speed turning, CNC work Package Including: 1 * MT3 Live Center Morse Taper Brand findmall MPN 258570 Type Live Center UPC Does not apply Warranty 1 year.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description?? #1 Morse Taper (1MT) shank, 60-degree point 0.0002" Concentricity 5000 Max RPM 12-28 NF Drawbar Thread Hardened to 61-65 Rockwell Features?? ... moreHigh quality triple bearing design (bearings are immersed & sealed) Made of precision ground hardened steel for high accuracy! Great for high speed turning, CNC work Package Included : 1 * MT1 Live Center Morse Taper Note:.
Buy It Now
$1.00 Shipping Condition: New Location: Fernley, United States These ER32 Bearing Collet Nuts won't improve your machines accuracy much (maybe. 0002") but they will extend your tool life. you can use these on an ER32 ... morecollet spindle also. These bearing nuts float the collet in the center of the tool holder and as they are tightened, they won't spin the collet as they are tightened and therefore they don't scratch the tool holder or the collet.
Buy It Now
Free Shipping Condition: New Location: Farmington, United States CHUCK TYPE Scroll Chucks. Manufacturer: Bison. Bison Item Number: 7-872-312. CHUCK SIZE 12". TYPE Base Plates for Rotary Tables. MANUFACTURER'S PART NUMBER ... more7-872-312. FOR USE WITH Rotary Tables. Item(s) described above and exactly what's pictured.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Dental 4" Round Vibrator Shaker Oscillator Variable-Intensity Model Vibrator USA Dental 4" Round Vibrator, Variable Speed Vibrator, variable-intensity ... moremodel vibrator, 4" Round Lab Shaker Oscillator, Lab Shaking Vibrator, Lab mixing plaster/gypsum, pouring models, and investing Vibrator This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm.
Buy It Now
$3.50 Shipping Condition: New Location: China Product series: SO series Product material: High quality H13 steel Processing scope: Carbon steel (various alloys such as 45 steel, 1810 steel, alloy ... moresteel, stainless steel, cast iron, heat-resistant alloys, etc.) Product features: Large space for chip storage, smooth chip removal, exquisite blade edge, and convenient installation Applicable scenarios: Can process irregular surfaces, concave convex surfaces, inclined surfaces, boring holes, cross holes.
Buy It Now
$103.64 Shipping Condition: Used Location: Milton, United States Total weight 96 lbs including both pallets. This lightly used quick change pallet changer is perfect for repeat jobs and is sure to keep your machine ... morerunning longer while you change parts.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Properties： Color:Silver Material:Steel Shank Size: Morse taper #2 Max RPM: 3,500 Accuracy: 0.000197" Load Capacity: 220 lb. Center Point: 60 ... moredegree Description: New: A brand-new, unused, unopened, undamaged item in its original packaging Made from high quality steel, sturdy, durable and high abrasion resistant. Triple ball bearing design with extended long spindle with CNC point to enhance grinding wheel clearance. Shaft is made of alloy steel through heat treatment to Rc 60-62 to achieve high rigidity and durability. Dust & water proof seal for long service life. for high speed lathe and CNC lathe.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： Size：1" Crown Item Package Quantity：1 Woodworking 2Mt and 1-inch lathe drive center Description： Get a better bite on your spindle with more ... moreteeth for a strong grip while still providing equal pressure and a positive drive Spring loaded point simplifies spindle centering and retracts to avoid spitting your work when tailstock pressure is applied Ships in plastic production sleeves at 4.8-ounces 4.5-by-1.5-by-1.5-inches with 1-inch crown Package Included： 1×Woodworking 2Mt and 1-inch lathe drive center Note：.
Buy It Now
$76.67 Shipping Condition: New Location: Saint Charles, United States When place the sine plate on sideway, top working surface is square to either side within. 0002”. Center distance of rolls: 10". Minute angle step. 200 ... more-. 0001". Center Distance. Includes two end rails and one locking strap.
Buy It Now
$7.35 Shipping Condition: New Location: Richmond, United States We have designed what we feel is the best 3J collet stop available. Our collet stop uses simple 3/8" rod. Easy to get and very cheap. V-Mar 3J Collet ... moreStop. 3J Collet Extensions. The stop rods are sized for 1/8", 3/16", 1/4", 5/16", 3/8".
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. This versatile lathe chuck is made of high-quality hardened steel, compression resistance and has a long service life. This chuck is ... morea short conical connection with high centering accuracy, good rigidity, and short overhang.
$14.50 Shipping Condition: Used Location: Lansing, United States 1301 Sunset Avenue | Lansing, MI 48917. Superior Machine & Tool, Inc.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. This versatile chuck is made of high-quality hardened steel, compressionresistance and has a long service life. It has two-way jaws ... moreto hold industrial parts in the size range 0.24" / 6 mm - 9.84" / 250 mm.
Buy It Now
Free Shipping Condition: New Location: United States Permanent Magnetic Chuck, Rectangular Chuck＞100N/Cm² Fine Pole Magnetic Force, Permanent Magnetic Chuck Single Sine Plate. Traditional permanent magnetic ... morechuck has low accuracy, insufficient magnetic force, and difficulty in removing the workpiece.
Buy It Now
$7.50 Shipping Condition: New Location: Richmond, United States We have designed what we feel is the best 16C collet stop available. Our collet stop uses simple 3/8" rod. Easy to get and very cheap. The stop rods are ... moresized for 1/8", 3/16", 1/4", 5/16", 3/8". The 2 smaller rods are aluminum.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Precision R8 Round Collet Drawbar Thread 7/16"- 20 Hardened And Ground 1/8"-7/8". Hardened And Ground Throughout. 7/16""-20 Draw Bar Thread. Precision ... moreGround to Close Tolerance.
Buy It Now
Free Shipping Condition: New Location: Monrovia, United States Points FREE SHIPPING Morse taper live center set Morse Taper: 2 Accuracy guaranteed to: 0006" Max speed: 1500 RPM Max load: 5000 lbs Body made of ... morespecial tool steel hardened and ground with special taper mount for quick change of points Can be used for heavy duty work since point and body act like solid Less heat is generated due to spring plate used at end of angular bearing Precision needle bearing used for high accuracy and long life 7 Interchangeable Points Weight: 3 lbs Case included Case O verall dimension: 6-1/2'L x 12'W x 2-5/8'H Quantity: 1 ● CONTINENTAL USA( excludes: HI. AK, PR, GU, and VI) shipping ONLY ● Shipping and Handling Fee: FREE SHIPPING Ground Service ● NO PO BOX address shipping ● We reserve the right to choose the carrier. ●*California residents only* sales tax will be added at check out. PayPal(We accept Visa/MasterCard. Discover and Amex through PayPal only. For personal checks please send your checks electronically via PayPal too) If you make the payment through PayPal. We can ONLY ship to your PayPal confirmed address. No exceptions. Payment must be received within 5 days or a Non Paying Bidder Alert will be filed. ● All purchases come with a 14-days money back guaranteed. ● SHIPPING IS NON REFUNDABLE. NO EXCEPTIONS. Buyers are responsible for all postage fees on return. ● All Returns must have RMA(Return Authorization Number) issued from Seller or package will be refused. Please contact us through ebay messaging for the RMA# ● Feedback is an integral part of eBay. ● Please leave feedback for us on eBay and we will do the same for you. If you are considering leaving us negative or neutral feedback. Please give us the opportunity to resolve the issue first. We do everything in our power to get the matter resolved. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$1.00 Shipping Condition: New Location: Fernley, United States Designed for use with any type of ER32 collet nut tool holder or an ER32 collet spindle. ER32-UM Spanner Wrench. You know how hard you need to crank on ... morethese wrenches to tighten a collet nut. These are about 1/4" thick steel and have a rubber handle for comfort.
Buy It Now
Free Shipping Condition: Used Location: Cranberry Township, United States THESE ARE MADE OF ALUMINUM AND WILL FIT BRIDGEPORT MACHINES AS WELL AS CLONES WITH 5/8" TABLE SLOTS THAT ARE 2-1/2" ON CENTER. INCLUDES CLAMPING BOLTS ... moreAND T-NUTS. THESE HAVE HARDENED GRIPPERS ON ONE BLOCK AND 1/4"-20 POINTED SET SCREWS ON THE OTHER BLOCK.
Buy It Now
$10.40 Shipping Condition: Used Location: Santa Cruz, United States Dead Center with#5 Morse taper for Lathe Tailstock or Headstock. As is the way You see it.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States This versatile chuck is made of high-quality hardened steel, compressionresistance and has a long service life. It has two-way jaws to hold industrial ... moreparts in the size range 0.16" / 4 mm - 7.87" / 200 mm.
Buy It Now
$25.00 Shipping Condition: Used Location: Pomona, United States What you see is what you get.
Buy It Now
Free Shipping Condition: New Location: Richmond, United States We have designed what we feel is the best 5C collet stop available. Our collet stop uses simple 3/8" rod. Easy to get and very cheap. The stop rods are ... moreturned down for 1/8", 3/16", 1/4", 5/16", 3/8".
Buy It Now
Condition: Used Location: Imlay City, United States USED - BROWN & SHARP TILTING SPACER WITH 2 INDEX PLATES.
Buy It Now
Free Shipping Condition: New Location: Madison Heights, United States The TSK series tilting rotary table can be tilted and locked from 0 - 90 degrees any angle. Ideal for machining oblique surface and holes. PRECISION TILTING ... moreROTARY TABLE - NEW. TABLE DIA: 4-3/8"/110mm.
Buy It Now
Free Shipping Condition: New Location: Richmond, United States These collet wrenches are now avail in PINK! Check them out here:V-Mar 16C /3J Collet Wrenches in PINK. Beautiful and strong, our 16C or 3J collet wrenches ... morehave a red anodized aluminum handle with wrench flats to help remove a stubborn collet.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： For Pen Mandrel Save. Description： -Includes 7mm Drill Bit, (5) 7mm Bushings, #2mt Mandrel Saver Tailstock Center, & #2mt Basic Mandrel. -Perfect ... moreSystem To Avoid Bent Mandrel Shafts And Ruining The Point On Your Live Center. -System Adapts To The Length Of Your Project. -No Need For The Knurled Nut That Sometimes Gets Lost, Misplaced, Or Stripped. -Great For Turners Of All Skill Levels. Package List: 1*7mm Drill Bit, 7mm Bushings(5), Mandrel, Mandrel Saver W/O Product Instruction Notes: -If You Are Not Sure The Item 100% Fit For Your Before Your Purchase..
Buy It Now
$1.00 Shipping Condition: New Location: Fernley, United States Designed for use with Any tool holders (eg. BT, ISO or HSK) that accept ER25 collets. 3/4" ER-25 Spring Collet. We still have 2 of your bad checks ! These ... moreare a direct fit for many different CNC machines.
Buy It Now
$25.00 Shipping Condition: New Location: Pomona, United States
Buy It Now
Free Shipping Condition: New Location: United States The 3 jaw lathe chuck is suitable for a variety of general-purpose lathes, economical CNC lathes, grinding machines, milling machines, drilling machines, ... moreand machine tool accessories. This versatile chuck is made of high-quality hardened steel,compression resistance and has a long service life.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: 3 Jaw Self Centering Lathe Chuck, Sttructure of solid jaws New and High Quality. The 3-Jaw Self-Centering Chuck Features Short Cylindrical Center ... moreMounting. Specifications: Diameter: 100 mm (3.94") Center Hole: 22 mm (0.866") Thickness: 55 mm (2.16") Bolt Circle Diameter: 84 mm (3.31") Runout: 0.002" Internal Jaw Clamping Range (A-A1): 2-30 mm (0.078"-1.18") Internal Jaw Jamming Range (B-B1): 30-90 mm (1.18"-3.54") External Jaw Clamping Range (C-C1): 30-80 mm (1.18"-3.15") Size: 100 mm (3.94") Jaw: 3 Jaw Model: K11-100 Color: Silver Material:Hardened Steel .
Buy It Now
$13.14 Shipping Condition: Used Location: Venice, United States INCOMPLETE 2MT Live Center & Point Set. Taper Size 2MT. Shank Type Morse Taper. Number of Points 7. Set Type Live Center & Point Set. Load Capacity (Lb.). ... moreRack Morgan Shelf 3. Fixed or Interchangeable Interchangeable.
Buy It Now
Free Shipping Condition: New Location: United States Permanent Magnetic Chuck, Rectangular Chuck＞100N/Cm² Fine Pole Magnetic Force, Permanent Magnetic Chuck Single Sine Plate. Traditional permanent magnetic ... morechuck has low accuracy, insufficient magnetic force, and difficulty in removing the workpiece.
Buy It Now
$30.25 Shipping Condition: Used Location: Richland, United States The key reason for the Comflex collet systems accuracy and gripping power is a unique flush nut design. It incorporates a rotating ball assembly producing ... morea “radial float”. This, in effect, forces the collet to self center for maximum grip, highest precision, and minimum tool wear.
|
|
|
|
Stellar live center 1/2" shaft 5" center
Up for bid is this Stellar live center 1/2" shaft 5" center. I measures the center from its tip to its base. Not to the end of arbor
|
|
|
Enco Live Center for Lathe No.2 MT
Enco Live Center made in France. No.2 MT The center spins freely and has some water satins.No rust Payment to be made with Paypal Thank You!
|
|
|
Skoal #2 Live Center High Speed Precision tool 2 bearing in original box
Live Center. Skoal# 2-used. In package, old stock from closed factory- made in Korea for Enco- Normally $150 from suppliers! On Oct-18-12 at 20:08:07 PDT. Seller added the following information:
|
|
|
Used Enco Live Center for Lathe With # 2 Morse Taper
Used Enco Live Center for Lathe With# 2 Morse Taper Overall Length 4-3/4" 2 Morse Taper Used. See pictures above for more details. Please feel free to contact us with questions. We combine shipments to lower customer costs. Plourde's Toolbox Bargains LLC makes no representation of any item(s) sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit(s) will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the item(s) International buyers are responsible for paying all import duty, tax, and fees which may be collected by their country when the parcel arrives. We declare the exact purchase price as the value ... moreof the goods when completing the customs declaration. The Purchaser, by bidding on this item, indicates their acknowledgment of and agreement to the terms of this disclaimer Thanks for looking.
|
|
|
Lathe - Dead Center # 3 & # 2 MT. / MR 127
Hello Folks. Today we have a Lathe Dead Center that is 5" long, 2 MT. with# 3 MT. Sleeve. It is used, but in good condition, no damages. P lease check out our Ebay store for other great bargians. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Slightly Used Ideal Live Center With No. 2 Morse Taper Cat# 47-072B
Slightly Used Ideal Live Center With No. 2 Morse Taper Cat# 47-072B Part No. 47-072B 6 Inch Overall Length#2 Morse Taper Used In good condition. See pictures above for more details. Please feel free to contact us with questions. We combine shipments to lower customer costs. Plourde's Toolbox Bargains LLC makes no representation of any item(s) sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit(s) will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the item(s) International buyers are responsible for paying all import duty, tax, and fees which may be collected by their country when the parcel arrives. We ... moredeclare the exact purchase price as the value of the goods when completing the customs declaration. The Purchaser, by bidding on this item, indicates their acknowledgment of and agreement to the terms of this disclaimer Thanks for looking. 1t.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13e1387d089-0xfc-
|
|
|
Lot of 2 Used Red-e-Tool Carbide Tipped Dead Center With Brown & Sharpe #6
Lot of 2 Used Red-e-Tool Carbide Tipped Dead Center With Brown& Sharpe#6 Used in working condition. See pictures above for more details. Please feel free to contact us with questions. We combine shipments to lower customer costs. Plourde's Toolbox Bargains LLC makes no representation of any item(s) sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit(s) will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the item(s) International buyers are responsible for paying all import duty, tax, and fees which may be collected by their country when the parcel arrives. We declare the exact purchase price as the ... morevalue of the goods when completing the customs declaration. The Purchaser, by bidding on this item, indicates their acknowledgment of and agreement to the terms of this disclaimer Thanks for looking.
|
|
|
LIVE CENTER 2'' STRAIGHT SHANK MOTOR TOOL 987Y
| | LIVE CENTER 2' STRAIGHT SHANK MOTOR TOOL 987Y, Click to View Image Album You are buying a used but nice live center. This center has a 2' straight shank shank. The head is 2& 5/8' in diameter and the nose is 1& 3/8' in diameter. This is made by Motor Tool co. and it has part number S-15-A. This center has been disassembled, cleaned and lubed. Bid with confidence knowing that Taps and More inspects. Cleans and tests(when possible) most tools prior to each auction. Payment, I accept the following forms of payment: PayPal Shipping& Handling, UPS Ground(prices calculated at checkout) Policies, STORE CATEGORIES, PAYMENTS, You may combine items to save on shipping. During checkout. We will apply your shipping discount. SHIPPING, Shipping will be via UPS unless otherwise specified. UPS will send an email containing ... morea tracking number once we ship your item. P.O. BOXES are never accepted. We ship items to physical addresses only. We ship to the address registered with PayPal. If that address is incorrect. It is the buyer s responsibility to supply us with the correct address prior to paying for the item. Your eBay account must be listed a business name to qualify for shipping discount. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 10 days have past. We ship 3 days a week. This means that your item can take as long as 10 BUSINESS days to receive your item. Inernational items may take longer. POLICIES, All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the bidder's responsibility to understand the terms of the auction. The nature of equipment offered and bid accordingly. The buyer must notify us of a problem within 3 days of receiving item(s) If you are not happy with your purchase, we will gladly refund your money, minus shipping costs. If the item is not as described, you wil
|
|
|
Live Center Morse Taper #5 Lot Of (2 Pcs)
Used Live Center Morse Taper#5 Lot Of(2 Pcs) Ship To Lower 48 States Item# 200
|
|
|
#2 MT Live Center - 9" South Bend 1937 Workshop Lathe Model 405-Y Serial 55177
This is a Very Heavy Number 2 Morse Taper Live Center@ 5 3/4: long from a Vintage 9" South Bend Workshop Metal Lathe with a 9" swing and 3 foot Bed. It is Serial#55177 Catalog No. 405-Y. Made by South Bend Engine Lathes In South Bend Indiana USA. The previous owner told me the lathe was from 1937 but I don't have verification of that. It is worn pitted and somewhat rusty with some nicks on the edges but in decent working condition and priced accordingly. Local pick-up available. I will combine shipping on multiple purchases when possible.
|
|
|
NICE! HIGH QUALITY CARBIDE TIPPED DEAD CENTER W/ 5MT SHANK - 7.2" OVERALL LENGTH
Made by unknown manufacturer(there are no markings visible on this center) This is a Carbide Tip Dead Center in good condition. This dead center came from a shop that had only the best tools. Take advantage of this deal before someone else does! Specifications: Shank: 5 Morse Taper Overall Length: 7.2" Comes as shown in pictures. 9200 R
|
|
|
UNKNOWN BRAND TAILSTOCK CENTER STAND, APPROX 6 1/2" CENTER TO BASE
UNKNOWN BRAND TAILSTOCK CENTER STAND APPROX DIMENSIONS: CENTER TO BASE 6 1/2" CAPACITY 3 1/2" IN MOVEMENT 1 1/2" SPINDLE CENTER DIAMETER BASE 10 1/4" X 7 1/4" GIBB CUT IN BASE 1/2" HOLD DOWN BOLT SIZE 5/8" CENTER TO CENTER 8 3/4" CENTER IS KEYED& 1/2 SET SCREW LOCK PLEASE READ BEFORE BIDDING. MAKING AN OFFER, OR PURCHASING Please DO NOT PAY until invoiced. WE COULD POSSIBLY SAVE YOU MONEY ON SHIPPING SHIPPING: All shipping/handling costs will be the sole responsibility of the buyer. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address so we can get the item shipped to you. Do not forget about any other charges which are charged by the carrier. This is something we have no control over and is an additional charge to shipping. RETURN POLICY: WE WILL REFUND YOUR MONEY ... moreIF THE ITEM YOU RECEIVE DOES NOT WORK AT ALL UNLESS IT WAS LISTED AS BEING PARTS ONLY OR NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. AFTER SELLER AGREES TO SENDING THE ITEM BACK AND THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE A REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: Please note we are not experts in the parts or related fields. We may not be able to answer all of your questions but we will do our best to find all information requested. Approximate weight: 55 lbs. Please contact us for any questions or concerns. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. Thank you for your interest in our items. We always appreciate the business opportunities Be sure to add us to your favorites list and check out our other items. RAB/ 6566/ SKID#232/ 1) E g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13e16d5b922-0xfa-
|
|
|
USED LATHE CENTER MORSE TAPER #3 5-1/2" OAL GOOD CONDITION 1561
YOU ARE BIDDING ON ONE USED LATHE CENTER MORSE TAPER#3 5-1/2" OAL GOOD CONDITION Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Used Ideal Live Center Taper No. 2 Catalog no. 47-002B. Stored 40 years.
Used Ideal Live Center Taper No. 2 Catalog no. 47-002B. Stored 40 years. Might need lube. Seems rough turning, These where not my tools. Not sure.
|
|
|
Used Royal Live Center With No.2 Morse Taper Changeable tip and Original box
Lightly Used Royal Live Center With No.2 Morse Taper# 10002 Changeable point and original box. 6 Inch overall length# 2 Morse Taper This will ship USPS Prioritiy flat rate at $5.35. NO RESERVE
|
|
|
Vintage Scully Jones & Company No. 74100 Lathe Live Center 2 Morse Taper
Vintage Lathe Live Center Scully Jones& Company No. 74100 Stamped: Scully Jones Live Center 2 Morse Taper Part No. 74100 Scully Jones& Co. Chicago. Ill. A nice addition for any lathe owner and/or collector. Buyer to pay $7.99 shipping. Thanks for looking and good luck!
|
|
|
Used Bull Nose Dead Center With Morse Taper #4 P/N TP4661 Head Size 3-1/2"
Used Bull Nose Center With Morse Taper#4 P/N TP4661 Taper: Morse Taper#4 Overall Length: 6-1/4Inches Head Length: 1-1/2 Inches Diameter: 3-1/2 Inches Slightly used. See pictures above for more details. Please feel free to contact us with questions. We combine shipments to lower customer costs. Plourde's Toolbox Bargains LLC makes no representation of any item(s) sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit(s) will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the item(s) International buyers are responsible for paying all import duty, tax, and fees which may be collected by their country when the ... moreparcel arrives. We declare the exact purchase price as the value of the goods when completing the customs declaration. The Purchaser, by bidding on this item, indicates their acknowledgment of and agreement to the terms of this disclaimer Thanks for looking.
|
|
|
Excellent Rolling Center MT 2 MT #2 Heavy Duty Spins Smooth
Excellent Rolling Center MT 2 MT#2 Heavy Duty Spins Smooth Rolling Center MT 2. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13e63f70b6d-0x106-
|
|
|
Bruckner Live Center. #2 Morse Taper 2MT
Bruckner Live Center. 2 Morse Taper 2MT
|
|
|
Skoda 2-CSN 243324 Live Center. #2 Morse Taper 2MT
Skoda 2-CSN 243324 Live Center. 2 Morse Taper 2MT
|
|
|
USED #6 JARNO TAPER LATHE DEAD CENTER (2.237"-Point Diameter)
LISTING IS FOR A USED#6 JARNO DEA D CENTER BRAND- PART# 29 45 907(Stamped on center) POINT DIAMETER- 2.237" OAL- 6.250" CONDITION- GOOD USED SOME NICKS AND DINGS Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, ... moreAMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL D
|
|
|
Lot of (2) TWO Swiss Made FAVOR D1 Live Center
This Lot of(2) TWO Swiss Made FAVOR D1 Live Center's is now up for auction! They are in VERY GOOD condition. And will be sent out to you as pictured! GOOD LUCK!
|
|
|
2 Live Center MT4 Used on South bend Atlas logan Clausing LeBlond
I have two Mt4 Live Centers. One Trade Mark No.4 The other Stratford tool company They are old and used. They are straight and true with no rust. Both turn just find with no hesitation. They were used on a large South Bend Lathe. I have no need for them any more. Any questions just ask. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13e6d3847de-0x104-
|
|
|
Bull Nose Live Center J&S 6 1/2" Tapered down to 3 1/4" Grinder Lathe. SWEET
J& S Bull Nose Live Center Model H-34. Size approx OD 6 1/2" Tapered down to 3 1/4" Shank? I think it is a Brown& Sharpe its very close to a#4 Morse Taper. Sweet Awesome condition. Free shipping in USA Only. As You see it. Make an offer.
|
|
|
MT4 set - large Ready live center + Jacobs 34 chuck 1/2" capacity
Ready MT4 live center. Large size cone, equal size as arbor. Very good condition.Spins well, and free. Jacobs# 34 chuck. No key. Fair condition. Turns fairly well, but.doesn't close perfectly tight. $12.50 Flat Rate Shipping to 50 states.
|
|
|
HEAVY DUTY TAILSTOCK - 3-1/2" CENTER HEIGHT
aims HEAVY DUTY TAILSTOCK- 3-1/2" CENTER HEIGHT read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. This is a Heavy Duty 3-1/2" Center Height Tailstock in good condition. Specifications: Center Travel: 1" Center Height: 3-1/2" Overall Dimensions: 4" x 6" x 4" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, ... moreplease check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HEAVY DUTY TAILSTOCK- 3-1/2" CENTER HEIGHT HEAVY DUTY TAILSTOCK- 3-1/2" CENTER HEIGHT HEAVY DUTY TAILSTOCK- 3-1/2" CENTER HEIGHT Reliable Tool Inc. c 2011 | Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13e9043d125-0x102-
|
|
|
JACOB LIVE CENTER 4-2
YOU ARE BIDDING ON ONE USED JACOB LIVE CENTER#4-2( GOOD CONDITION) Bid now because there is NO RESERVE and there is $10.00 SHIPPING within the US. So you can save! Winning bidder must respond within 24 hours and send payments in accordance to all eBay rules and regulations. WE ACCEPT PAYPAL! Thanks and happy bidding. HAWAII- ALASKA- PUERTO RICO- PLEASE EMAIL FOR QUOT.
|
|
|
Royal Ball Bearing Live Center Mt 2 Metal Lathe Southbend Atlas Craftsman
Royal live center with mt 2 mount. Posted with jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13eb7fb1be6-0xf4-
|
|
|
SKODA LIVE CENTER #2-CSN 243324 W/ 2MT SHANK
aims SKODA LIVE CENTER#2-CSN 243324 W/ 2MT SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Skoda. This is a Live Center in good condition. Model# 2-CSN 243324. Specifications: Shank: 2 Morse Taper. Nose Diameter: 865" Overall Length: 5" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions ... morein this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SKODA LIVE CENTER#2-CSN 243324 W/ 2MT SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
LIVE CENTER 2 & 1/2 STRAIGHT SHANK W & S 987X
| | LIVE CENTER 2& 1/2 STRAIGHT SHANK W& S 987X, Click to View Image Album You are buying a used but nice live center. This center has a 2& 1/2' straight shank shank. The head is 3& 1/2' in diameter and the nose is 1& 3/4' in diameter. This is made by Warner and Swasey and it has part number M-4153. This center has been disassembled, cleaned and lubed. Bid with confidence knowing that Taps and More inspects. Cleans and tests(when possible) most tools prior to each auction. Payment, I accept the following forms of payment: PayPal Shipping& Handling, UPS Ground(prices calculated at checkout) Policies, STORE CATEGORIES, PAYMENTS, You may combine items to save on shipping. During checkout. We will apply your shipping discount. SHIPPING, Shipping will be via UPS unless otherwise specified. UPS will send an email ... morecontaining a tracking number once we ship your item. P.O. BOXES are never accepted. We ship items to physical addresses only. We ship to the address registered with PayPal. If that address is incorrect. It is the buyer s responsibility to supply us with the correct address prior to paying for the item. Your eBay account must be listed a business name to qualify for shipping discount. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 10 days have past. We ship 3 days a week. This means that your item can take as long as 10 BUSINESS days to receive your item. Inernational items may take longer. POLICIES, All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the bidder's responsibility to understand the terms of the auction. The nature of equipment offered and bid accordingly. The buyer must notify us of a problem within 3 days of receiving item(s) If you are not happy with your purchase, we will gladly refund your money, minus shipping costs. If the item is not as desc
|
|
|
Improved Neilsen #2 Morse Taper Live Center No S22111
Improved Neilsen#2 Morse Taper Live Center No S22111 Good Working Condition Questions? Call Robert at 607-259-5615 NU1-D5-R2 On Apr-02-13 at 11:53:40 PDT. Seller added the following information:
|
|
|
Ready Tool #2 Morse Taper Live Center No 620
Ready Tool#2 Morse Taper Live Center No 620 Good Working Condition Questions? Call Robert at 607-259-5615 NU1-D5-R2 On Apr-02-13 at 11:53:40 PDT. Seller added the following information: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13ed860c09e-0xff-
|
|
|
2 MT Spur Center for Atlas / Craftsman Lathes / MY 137
Hello Folks. Today we have from the estate of a retired machinist, 2 MT Spur Center for both Atlas and Craftsman lathes. 2MT Spur Center has removable point; it is used; there is some wear on spurs and point to toucki-up. There is no brand name visible, but it looks to be a good quality piece. P lease check out our Ebay store for other great bargains. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us ... moreby Ebay. 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13eec054274-0xfa-
|
|
|
MT4 shank live center 1" cone dia, 2.7" OD STURDIMATIC DETROIT
GOOD USED LIVE CENTER 012-08-04-22/1500 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, ... moreINSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, PAINT, ENGRAVING OR GREASE ON THEM. ASK FOR BETTER PICS IF YOU CARE* All items are subject to l
|
|
|
UNKNOWN MFG. LIVE CENTER # 4 MORSE TAPER OVERALL LENGTH 8 1/4" BODY 2.55"
USED IN GOOD CONDITION UNKNOWN MFG. LIVE CENTER# 4 MORSE TAPER Overall Length L: 8 1/4" Center Diameter: 1.362" Body Diameter: 2.55" FAST SHIPPING PLEASE EMAIL FOR COMBINED SHIPPING Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
TDW SKH2 MT5 DEAD CENTER CENTER:1 1/2 " OVERALL LENGTH 7 7/8"
USED IN GOOD CONDITION TDW SKH2 MT5 DEAD CENTER C ENTER:1 1/2" OVERALL LENGTH:7 7/8" BODY:1.78" SEE PHOTOS FAST SHIPPING PLEASE EMAIL FOR COMBINED SHIPPING Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Kabuto # 2 live center parts
Kabuto#2 live center. Replacment center parts no live center. Just replacment centers;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13ef47530f5-0xff-
|
|
|
#2 MORSE TAPER LIVE CUP CENTER
THIS IS A SHORT#2 MORSE TAPER LIVE CUP CENTER WITH VERY GOOD BEARING IN GOOD USED CONDITION. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
|
|
|
#2 MORSE TAPER WOOD TURNING SPUR CENTER
THIS IS A#2 MORSE TAPER WOOD TURNING SPUR IN GOOD USED CONDITION. IT IS MISSING THE POINT AND SET SCREW. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
|
|
|
NICE!! NAKANE 2 MORSE TAPER LIVE CENTER - #LS NO.2
aims NICE! NAKANE 2 MORSE TAPER LIVE CENTER- LS NO.2 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Nakane. This is a 2 Morse Taper Live Center in GREAT condition. Features: Ultra high quality taper roller bearings. Thrust and roller bearings assure smooth and precise rotation. Precision ground finishes are maintained to guarantee a high level of durability and accuracy. Specifications: Shank: 2 Morse Taper. Head Diameter: 950" Overall Length: 4-3/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! NAKANE ... more2 MORSE TAPER LIVE CENTER- LS NO.2 NICE! NAKANE 2 MORSE TAPER LIVE CENTER- LS NO.2 Reliable Tool Inc. c 2011 | Powered by
|
|
|
SKODA LIVE CENTER w/ 2MT SHANK - #2-CSN243324
aims SKODA LIVE CENTER w/ 2MT SHANK- 2-CSN243324 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Skoda. This is a Live Center with a# 2 Morse Taper Shank in good condition. Model# 2-CSN243324. Features: Ultra high quality taper roller bearings. Thrust and roller bearings assure smooth and precise rotation. Precision ground finishes are maintained to guarantee a high level of durability and accuracy. Specifications: Shank: 2 Morse Taper. Center Diameter: 7/8" Head Diameter: 1-7/16" Overall Length: 5" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! ... moreBidding starts at a dollar with no reserve. SKODA LIVE CENTER w/ 2MT SHANK- 2-CSN243324 Reliable Tool Inc. c 2011 | Powered by
|
|
|
MOYOR TOOL DETROIT 2MT #EL-200 LATHE LIVE CENTER WITH CTD 2 TO 3 ARBOR ADAPTOR
MOTOR TOOL DETROIT MT2 LATHE LIVE CENTER MODEL#EL-200 WITH CTD 2-3 ARBOR ADAPTER. USED CONDITION AND IN GOOD WORKING ORDER. NO RESERVE AUCTION.
|
|
|
12 piece lot Lathe Center Centers Lathe Interchangeable set 1 1/2" stright
This listing is for a lot of 11 assorted centers and a 1 1/2" straight shank center holder as shown tool holder is a straight shank 1 1/2" there is 11 assorted centers large ones are 2 3/4" round as shown all shanks the same size and fit center holder condition like new you will receive all the items in the photos please see all photos if you have any questions or would like any extra photos please contact me and if you live local all items can be previewed or picked up to save on postage Please be sure to check out my other tools and equipment i can combine postage all items are sent within 2 business days thank you for viewing
|
|
|
USED #6MT LATHE DEAD CENTER (2.378" Point Diameter) PZKa-6
LISTING IS FOR A USED#6MT LATHE DEAD CENTER BRAND- PART# PZKa-6 TAPER- 6MT POINT DIAMETER- 2.378" OAL- 11.250" CONDITION- GOOD USED SOME SURFACE RUST MICRO-PITTING ON TAPER Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, ... moreMASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PL
|
|
|
1 LIVE CENTER 2-CSN243324, MT3 SHANK & 1 DEAD CENTER R.E.T. HIGH SPEED MT
Inventory Number: 04120250124 Manufacturer: Description: 1 LIVE CENTER 2-CSN243324. MT3 SHANK& 1 DEAD CENTER R.E.T. HIGH SPEED MT Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS FOLLOWS: ONE: 2-CSN243324 LIVE CENTER, MT3 SHANK, ONE: R.E.T. HIGH SPEED DEAD CENTER, MT3 SHANK, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify ... moreus at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple qu
|
|
|
USA! PRECISION LIVE CENTER W/ #2 MT SHANK
aims USA! PRECISION LIVE CENTER W/ 2 MT SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Live Center in good condition. Specifications: Shank: 2 Morse Taper. Nose Diameter: 7/8" Overall Length: 5" Approx. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. USA! PRECISION LIVE CENTER W/ 2 MT SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
USA! IDEAL PRECISION LIVE CENTER W/ #2 MT SHANK
aims USA! IDEAL PRECISION LIVE CENTER W/ 2 MT SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Ideal Industries. This is a Live Center in good condition. Specifications: Type: S. Shank: 2 Morse Taper. Nose Diameter: 5/8" Overall Length: 5-1/2" Approx. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. USA! IDEAL PRECISION LIVE CENTER W/ 2 MT SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
5" Bull Nose Head Live Pipe Center with Morse taper for a LATHE 3-3/8" to 5-1/2"
5" Bull Nose Head Live Pipe Center with Morse taper for a LATHE 3-3/8" to 5-1/2"
|
|
|
Excellent # 2 Morse Taper CROTCH CENTER for Myford South Bend Atlas Lathe
This Sale is for ONE Excellent# 2 Morse Taper CROTCH CENTER for Myford South Bend Atlas Lathe. Please see photographs for more detail. A 6" ruler shown is for size reference only and not part of sale. Thank you for looking. We ship Wednesday through Friday and are happy to combine orders for shipping costs. Please check my other sales& auctions of precision watchmakers. Machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. Canadian Buyers must pay applicable taxes. Please be advised international bidders may have customs or duty charges applied by their government when items cross the border. These are the sole responsibility of the buyer. have No way to know when and if these charges will be applied. I will not falsify shipping documents. So please don't ask. ... moreWe accept PAYPAL for sales within north America. All items shipped to the US are sent by courier(we offer rates that are nearly the same as postal service) for fast and accurate delivery. The shipping rates listed are for Canada and Continental USA. For Alaska, Hawaii and Overseas please request a shipping quote. All items are sold"as is" with no warranty of performance or suitability.Proper and safe use of any item(s)purchased is the sole responsibility of the purchaser.It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR& Father Industrial Machinery& Supplies Inc. and its directors against any damage or penalties associated with: 1. compliance to current or future laws. Rules or regulations pertaining to the use or possession of any equipment device or components, 2. any fatality, personal injury or liability arising from the use or possession of any purchased equipment, device or component, 3. any property damage caused directly or indirectly by the use, operation or possession of any equipment, device or component.If any legal action ensues,the buyer agrees to pay all legal costs of the sell
|
|
|
Center Height ~3-1/2" Tail Stock Center for Indexer or Spacer or Dividing Head
Center Height ~3-1/2" Tail Stock Center for Indexer or Spacer or Dividing Head Base measures 3" x 3-1/2" Fits a 5/8" wide T-Slot Pictures are of the actual items Used but in good condition
|
|
|
LIVE CENTER with # 2 Morse Taper Perfect for South Bend Lathe 6C
LIVE CENTER with# 2 Morse Taper Made in USA. Perfect for South Bend Lathe Location 1C Any Questions Call and Ask for Dave Phone Number Two One Five-Three Four Three- Thirty Nine Sixty Six. No Calls after 8 PM. Eastern Time
|
|
|
Lathe Live center, small size,1/2" straight shank, Rigid Products Co.
Rigid brand small size live center. 3 7/8" overall length with 1/2" straight shank. Has grease fitting in butt end for lubrication. Estate purchased tool has been used and is in original box. Untested as found condition. The center moves freely by hand. Thanks for looking. USA shipping only. I will combine shipping with multiple purchases. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Bull Nose MT 2 dead center
No manufacterer listed; Good condition. Paypal only please; I will ship this unit to any USA Paypal address by USPS.
|
|
|
Crotch Center, Mt 2 arbor, South Bend, Logan, Atlas, others
Mt 2 arbour. 90 degree V notch, 1 7/8" head diameter; Paypal only please. This will be shipped USPS priority mail to USA addresses.
|
|
|
Dead Center; MT 2; South Bend, Clausing,Atlas, Logan , numerous others
As shown Mt 2 taper fits tailstock of most common hobbyist lathes. Paypal Only please. This will be shipped USPS priority mail.
|
|
|
STURDIMATIC LATHE LIVE CENTER 1 1/2" STRAIGHT SHANK
LOTS OF AUCTIONS ONLINE NOW! Brand Sturdimatic Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
Lathe Tail Stock Live Center Morse Taper 2 MT2
Lathe Tail Stock Live Center Morse Taper No 2
|
|
|
LATHE dead center taper 1inch-1 1/2
lathe dead center tapered 1 inch to 1 1/2
|
|
|
Live Center & Countersink Tools NSK 1/2" - 1 1/2" LC-5F6
Live Center& Countersink Tools NSK 1/2" 1 1/2" LC-5F6 Shipping Weights: 15 lbs(ADY180 4.4.C L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional ... morecharge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please call
|
|
|
Lathe Live Center MT2 Tailstock , Faceplate Etc With Morse Taper 2
Live Center Lathe Morse Taper No 2 I Don' t Think I Used More Than Twice
|
|
|
PAIR OF HEAVY DUTY TAILSTOCKS - 2-1/2" & 3" CENTER HEIGHTS
aims PAIR OF HEAVY DUTY TAILSTOCKS- 2-1/2" 3" CENTER HEIGHTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a pair of Heavy Duty Tailstocks in good condition. Specifications: Center Height: 2-1/2" 3" Overall Dimensions: 3" x 3-1/2" x 5" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PAIR OF HEAVY DUTY TAILSTOCKS- 2-1/2" 3" CENTER HEIGHTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
TRADE MARK HD LIVE CENTER LATHE MACHINING INDUSTRIAL MT2 #2 2 TAPERED SHANK
TRADE MARK HD LIVE CENTER LATHE MACHINING INDUSTRIAL MT2#2 2 TAPERED SHANK Trade Mark MT-2 LIVE CENTER Made In Japan This listing is for a live center in good used condition. Comes with 4 additional changable tip ends still new encased in wax with tool all as shown. The arbor size is a Morse Taper No. 2. Has a total of 4 patents numbers on this. Don't miss out on this today! See pictures for more details and please make sure that this is the part you need. As it is a non-returnable item. Thank you. lathe lathing drilling chuck You can save on combined shipping when purchasing multiple items that are shipped at same time. COMPETITIVE AUTOMOTIVE INC. PAYMENTS: We offer Master Card. Visa, and Discover Credit Cards, as well as Pay-Pal, which will be shipped to a confirmed address only! We will not ship to unconfirmed or unregistered shipping ... moreaddresses, we also will not ship to third parties. Intention of payment should be made within 24 hours of winning an auction. Identification may be required and cleared funds approved before picking up items in person. SHIPPING: We ship using USPS Priority mail and UPS ground. We only use UPS and USPS Priority shipping services for ground shipping at this time as they provide shipping or tracking numbers as proof of shipping and delivery. As required by credit card and PayPal issuers. Shipping beyond the 48 contiguous continental United States to Alaska. Hawaii, Puerto Rico and some other US territories may use a different shipping formula of dimensional weight instead of actual weight on some items, mostly due to sizing. The shipping calculator can sometimes be off for these places. Shipping prices to these locations may be subject to corrected updating if they are found to be incorrectly formulated. We offer combined shipping whenever possible as items can be combined and shipped together. Combined shipping can save substantial money especially on the smaller type items. We can only offer combined shipping when the items can be shipped and packaged at the same time. When us
|
|
|
No. 2 Morse Taper Live Center, 60 Deg Craftsman, VG Cond But Point Is Scored
No. 2 Morse Taper Live Center. 60 Deg Craftsman, VG Cond But 60 deg Point Is Scored& should be refinished. I accept bids ONLY FROM U.S.A. 50 states. If you have a NON-U.S. Paypal account& a U.S. address, I WILL NOT ACCEPT YOUR BID& your Paypal payment will be blocked. PA residents of(Allegheny County) Phila County must add(7% 8% sales tax. All other counties in PA must add 6% sales tax. Buyer pays 9.75 for packing, handling, shipping for U.S. 50 state delivery. APO, FPO& others higher. I ship every Wed weather permitting.
|
|
|
LOT OF 3 LATHE CENTERS TAPERED SHANK 2 LIVE CENTER 1 DEAD CENTER USED
CSS file failed to load. Please refresh the page or try again later. | | | | | | LOT OF 3 LATHE CENTERS TAPERED SHANK 2 LIVE CENTER 1 DEAD CENTER USED LOT OF 3 LATHE CENTERS TAPERED SHANK 2 LIVE CENTER 1 DEAD CENTER USED[Click on the above image to view it full size] Up for auction we have a LOT OF 3 LATHE CENTERS TAPERED SHANK 2 LIVE CENTER 1 DEAD CENTER USED This is a lot of 3 used Lathe Centers. 1 is a Ready Tool Company Live Center with a 4 1/4" Morse tapered shaft. The other 2 centers have no markings or information on them. The dead center has a point diameter of.6015" It also has a 4 1/2" Morse taper shank. The third center is a live center with a point diameter of 2.2135" and a 5 1/4" tang end taper shank. All of these items are used and are in usable condition. I am not a machinist so please look at the photographs ... morecarefully. The overall length of each center is from 7" to 8 1/4" Please see the pictures to the left for more details! The item you see pictured is the exact item you are bidding on and will receive! Bidding starts at $0.99 with NO RESERVE! Click on an image to enlarge] Approximate Shipping Weight: 15.00 lbs. SKU: lot3lathecenters-bq. Up for auction we have a LOT OF 3 LATHE CENTERS TAPERED SHANK 2 LIVE CENTER 1 DEAD CENTER USED This is a lot of 3 used Lathe Centers. 1 is a Ready Tool Company Live Center with a 4 1/4" Morse tapered shaft. The other 2 centers have no markings or information on them. The dead center has a point diameter of.6015" It also has a 4 1/2" Morse taper shank. The third center is a live center with a point diameter of 2.2135" and a 5 1/4" tang end taper shank. All of these items are used and are in usable condition. I am not a machinist so please look at the photographs carefully. The overall length of each center is from 7" to 8 1/4" Please see the pictures to the left for more details! The item you see pictured is the exact item you are bidding on and will receive! Bidding starts at $0.99 with NO RES
|
|
|
ROYAL PRODUCTS EMPIRE BALL BEARING LIVE CENTER #2 MT
Empire Ball Bearing Live Center Mfg by Royal Products#2 MT Shank 2" Major Diameter Good Condition No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding! f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-1404437eabc-0x103-
|
|
|
Carbide Tip Lathe Center No. 3 Morse taper & 2 tapered Mandrels W Center Lube
Here's a $20 BUY IT NOW for a New tube of High Pressure Center lubricant. A slightly used solid carbide tipped lathe center and 2 One inch diameter precision Tapered Mandrels in good but dirty condition. They will need polishing before using. Shipping anywhere in the USA is $5.50 Pay with PayPal
|
|
|
1 1/2" STURDIMATIC LATHE LIVE CENTER LOGAN SOUTH BEND HARDINGE CLAUSING
1 1/2" STURDIMATIC LATHE LIVE CENTER AS SHOWN IN PHOTOS PLEASE SEE ALL PHOTOS IF YOU WOULD LIKE MORE PHOTOS OR HAVE ANY QUESTIONS PLEASE CONTACT ME
|
|
|
CONCENTRIC SPRING LOADED LIVE CENTER SHANK old, machining, lathe, Morse taper 2
Hello. Item for sale is a concentric spring loaded live center with Morse taper 2. I have had this for quite some time. I believe I got it from my grandfather because he was a machinist. I have not used this item. Item looks to be in great condition. Has original inspection report. I believe. Please review pictures and let me know if you have any questions. Everything in pic included. I usually am able to ship out items within 24 hrs of payment. Thanks for looking! Good luck!
|
|
|
7 PIECES OF # 2 MORSE TAPER, JACOBS CHUCKS & SOUTHBEND LIVE CENTER
A Pretty little spread of#2 Morse Taper stuff. Jacobs chuck 0 to 1/4" and a Jacobs chuck 0 to 1/2" A Southbend live center, couple of good drills, adead center and I believe the flat blade is a countersink. Everything is in good condition and works smoothly. A total of 7 pieces in all. Thanks for looking.
|
|
|
LATHE #1MT DEAD CENTER WITH MORSE NO 1 TO NO 2– MACHINIST TOOL
LATHE#1MT DEAD CENTER WITH MORSE NO 1 TO NO 2– MACHINIST TOOL CONDITION: Normal wear and tear– see pictures Good Working Condition: No 1 to No 2 adapter has a few dents and digs but still useable. Will Combine Shipping– Request Invoice Please e-mail with questions.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-140737f71cf-0xf2-
|
|
|
Shoda 2-CSN 243324 live center cone morse taper for lathe machinist tooling
Used center. Turns freely. Posted with k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-1408927832a-0xfe-
|
|
|
3 Morse Taper #2 Jacobs Chucks & 1 Southbend MT#2 Live Center
Nice clean assortment of Jacobs Chucks and a Southbend Live Center. Everything is#2 Morse Taper. I have been using these in the tail stock of my little 9" Southbend. One of the smaller ones is a precision chuck and holds from 0 to 1/4" next up in size is also 0 to 1/4" and the larger one is 0 to 1/2" The center is vintage Southbend and the oiler is in good condition. Everything works very smoothly, has chuck keys and is#2 Morse Taper. Thanks for looking and good luck.
|
|
|
MORSE TAPER #4 LATHE DEAD CENTER, 2-1/2" DIAMETER
Inventory Number: 07131250045 Manufacturer: Description: MORSE TAPER#4 LATHE DEAD CENTER. 2-1/2" DIAMETER Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1 BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items ... morepurchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some a
|
|
|
Rohm Revolving Tailstock Live Center 100H and 2 Dead Centers + 2 cutters
Up for auction is this used ROHM Revolving Tailstock Live Center 100H. And 2 dead centers, plus 2 used cutters.
|
|
|
Concentric Spring Loaded Live Center No. 2 Morse Taper 2MT
Concentric Spring Loaded Live Center No. 2 Morse Taper 2MT This is a Original Concentric spring loaded live center with MT2 shank in its original wood box. It features automatic thrust adjustment. The Spring Loaded Spindle compensates for expansion or contraction of the work piece. It will maintain constant tailstock thrust and will eliminate jamming. The previous owners part no. is etched on end of spindle. Riten Industries aquired Concentric in 2002. This Concentric Live Center is in excellent used condition. See pictures for details Put this Concentric Spring Loaded Live Center to work in your machine shop. Place your winning bid now! 100% Customer Satisfaction On Items We Offer Shipping: $ 6.50 USA We will ship worldwide International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping ... morecost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Please email us with any questions before bidding Check out my other items! Be sure to add me to your! Please continue to pray for our men and women in the armed services who are stationed around the world Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Ideal Industries No. 47-002B Live Center w/ No. 2 Morse Taper
Up for bid is an Ideal Industries live center with a No. 2 morse taper shank. The tool is in excellent condition with not many signs of physical wear. Its very well made and is driven on New Departure sealed bearings. It even comes in the original factory packaging.
|
|
|
GERMANY!! CONZELLA BULLNOSE LIVE CENTER w/ #2 MT SHANK
aims GERMANY! CONZELLA BULLNOSE LIVE CENTER w/ 2 MT SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Germany by Conzella. This is a Bullnose Live Center in GREAT condition. Specifications: Nose Diameter: 3/4" Body Diameter: 2-3/8" Shank: 2 Morse Taper. Overall Length: 5-3/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. GERMANY! CONZELLA BULLNOSE LIVE CENTER w/ 2 MT SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
LIVE LATHE CENTER SUPPORT WITH CHANGEABLE POINTS MORSE TAPER #2
Retired precision instrument manufacturer is liquidating his tools. Machinery, etc. Will be shipped in wooden box as in photo, but it is not the original one. It is the one that has been its home for a few years. The Lathe Center Support is in good working condition, Please inquire if you have any questions.
|
|
|
SKODA #2- H/D PRECISION LIVE CENTER CSN 243324 w/ #2MT SHANK 310-110
SKODA#2-CSN 243324 H/D PRECISION LIVE CENTER w/ 2MT SHANK 310-110 This Live center has the additional oil port It is Heavy Duty#2 It has some light scuffs but no harm it is very smooth Shipping will be $6.00 Priority Please see my other listings;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1418754cb27-0x104-
|
|
|
10K South Bend live center, #2 MT
10K South Bend live center. 2 MT The chuck is in great shape with a little surface rust.
|
|
|
LATHE DEAD CENTER , MT-2 , CARBIDE TIP , TAIWAN
MAY BE UNUSED?
|
|
|
SCULLY JONES LIVE CENTER - #2 MT (74100)
SCULLY JONES LIVE CENTER- 2 MT(74100) CONDITION: Used– Normal Wear& Tear– See Pictures TIGHT OPERATION. SMOOTH, NO RATCHETING Will Combine Shipping– Request Invoice All items are shipped USPS economy and same cost to all buyers. So please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. Typically the shipping charge will be less than the actual cost to ship. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used Should there be a mistake in the AD the shipping difference will be immediately refund. Please e-mail with questions
|
|
|
MT #2 to #1 sleeve #1 Dead Center and #1 Arbor
MT#2 to#1 sleeve#1 Dead Center and#1 Arbor. Good Used Condition. WILL COMBINE SHIPPING. FREE U.S. SHIPPING TO L OWER 48 STATES. All others by weight. All International shipping. Buyer is responsible for any customs charges or taxes.
|
|
|
2- Sandvik Coromant #90-SRV-5-65100 Live Center RV-5
2-Sandvik Coromant.Live Centers#90-SRV-5-65100, used, one has leaky lube seal,but in original box with operating instructions other one doesn't but may need some repair?Will allow 10 day return period for refund of purchase price. Shipping weight for both is 23lbs. Will ship anywhere in U.S. or Canada, keep shipping costs low as possible. Questions contact me at ebay or 217-259-9678. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-141fbef56f0-0xf8-
|
|
|
MORSE TAPER 1 & 2 METAL LATHE DEAD CENTER SOUTH BEND ATLAS CRAFTSMAN MACHINIST
MORSE TAPER 1 DEAD CENTER 3" OVERALL LENGTH INCLUDES MORSE TAPER 2 SLEEVE The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
MORSE TAPER 2 MT2 METAL WOOD LATHE CUP CENTER SOUTH BEND ATLAS LOGAN CRAFTSMAN
MORSE TAPER 2 CUP CENTER HARDENED STEEL WITH REPLACEABLE CENTER POINT The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
GEPY SWISS MO 2 LIVE CENTER FOR SCHAUBLIN 102 LATHE
Normal 0 false false false MicrosoftInternetExplorer4 Up for bids is this Gepy live center for a Schaublin model 102 lathe. Shows some old cutting oil here and there and could use a clean up. Marked GEPY this is a#2 Morse Taper. This piece is well used and in good condition. Please feel free to email any questions you may have. Please be sure to check out my other Schaublin lathe auctions!
|
|
|
ATLAS CRAFTSMAN LATHE DEAD CENTER MT, MORSE TAPER 2
This listing is for a Atlas CRAFTSMAN LATHE DEAD CENTER MT 2. Comes as shown. WITH BOX PLEASE LOOK AT ALL THE PICTURES FOR MORE INFORMATION Click on"Lathes" in my store for more parts. NO CRACKS OR WELDS. Wait for invoice before paying. If you want combined shipping. Sellers note: Feel free to ask questions during the auction if you need more information! I take care to present accurate pictures and accurate descriptions. If a buyer finds the description to be inaccurate I will accept returns and refund the item price. I leave feedback as soon as the buyer does! You'll need to do your own research on your specific application. keep us in your favorite seller file and watch frequently for parts as they come up. If you have any requests. We can check it out for you. So, watch for these items coming in the near future. We will ... morecombine shipping for multiple auctions won. Message me with any questions. THAT IS THE BEST WAY TO GET A HOLD OF ME. Good Luck and Happy Bidding! SELLERS TERMS AND PROCEDURES We will e-mail winners within 24 hours of the winning bid and an invoice. Upon payment. We will then ship the item(s) within 3 business days. We would also ask that you e-mail us after you receive your shipment to let us know that it was received satisfactorily and them please leave us feedback and we will do the same for you. Buyer pays all shipping costs. PayPal via checking account or paypal account.
|
|
|
2 MT Morse Taper Lathe Live Center+Carbide Tipped Solid Center Atlas Craftsman
All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. International Bidders Please Inquire About Shipping Cost Prior To Bidding SOTTOF SALES Good used center and carbide tipped solid center that looks unused. Both are 2 MT. D3917.2 EBAY AUCTION POLICIES: Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail ... morelarger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
|
|
|
FEMALE LIVE CENTER #2 MORSE TAPER SHANK #52695
FEMALE LIVE CENTER#2 MORSE TAPER SHANK BEARING IS A LITTLE ROUGH ITEM IS USED; MAY SHOW SIGNS OF USE INVENTORY#52695 WE DO OFFER COMBINED SHIPPING PLEASE WAIT FOR AN INVOICE ON MULTIPLE PURCHASES
|
|
|
Vintage D.T.C. High Speed No. 2 Lathe Dead Center 60° Included Angle
Another Dan West Auction Vintage D.T.C. High Speed No. 2 Lathe Dead Center 60° Included Angle Here offered is a vintage but in new new condition No. 2 dead center for your lathe. This center is marked D.T.C. HS(High Speed) and 60 included angle. A nice used but not abused center for your tool box. Check out our photos. You can see the nice condition in them. Check out our online West Mercantile Store for antiques. Vintage Books and Victorian buttons. Click Here for"West Mercantile" We gladly combine shipping on same week multiple purchases! Bookmark this site if you want to pickup some great items for your collection of Civil War era memorabilia. Remember OLDGUNHUNTER Help yourselves folks to this neat item. This is a NO RESERVE AUCTION! Great Gift for the Special Person! We guarantee all our items 100% Shipping charges apply ... moreto lower 48 United States. Shipping charges may very to Western U.S. as well. We try to get as close as possible to the actual shipping charges for each package but reserve the right to request additional funds to Western U.S. as well as Alaska& Hawaii. We also reserve the right to add insurance to the cost since eBay's system will allow only $4.00 shipping charges for books in the rare book category. We will not inflate the insurance charges. WINNING BIDDER TO PAY SHIPPING AND INS. ALL WITHIN 7 DAYS OF AUCTION CLOSE CHECK OUT OUR OTHER UNIQUE ITEMS ON EBAY THANKS. DAN Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
MACHINIST TOOLS LATHE MILL NICE Live Center for Lathe with # 2 MT
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-1431ca51d68-0xea-
|
|
|
ROYAL 2-MT LIVE CENTER # 10212 - FREE SHIPPING!
ROYAL 2-MT LIVE CENTER# 10212 for LATHE- ROYAL 2-MT LIVE CENTER INVENTORY# 5871 MODEL: 10212 MADE IN THE USA SPECIFICATIONS: TAPER SIZE: 2-MT SHANK TYPE: TAPER ACCURACY: 0.000050" INCLUDED ANGLE( 60.00 MAXIMUM RPM: 6000 RPM MAXIMUM WORKPIECE WEIGHT: 375 LBS POINT STYLE: LONG POINT DIAMETER: 7/8" POINT LENGTH: 1.35" TIP DIAMETER" 3/8" HEAD DIAMETER: 1 3/4" HEAD LENGTH: 1.47" SHANK LENGTH: 2.8125" LOAD CAPACITY: 2735 LBS THRUST LOAD: 2360 LBS RADIAL LOAD: 375 LBS BEARING TYPE: DOUBLE BEARING MATERIAL: STEEL OVERALL LENGTH: 5 3/8" EXCELLENT CONDITION NEW REPLACEMENT COST: $424.00 FOB OUR BALTIMORE. MD WAREHOUSE CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after ... morebusiness hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RETURNS Returns will not be accepted without prior approval. If you need to make a return. Please contact us before you ship the merchandise back so we can issue you a Return Merchandise Authorization(RMA) number. All items are sold with the best intentions and most complete description available. PLEASE ASK QUESTIONS BEFORE BIDDING! Buyer must pay for return shipping. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a. Buy the best& buy Phase-A-Matic. Phase-A-Matic phase converters are proven to las
|
|
|
MT4 standard live center 2.004 - Bruckner
This 2.004 live center is Demo one with very little rust and scratch on the housing. But still in excellent working condition. Original from Karl Bruckner GmbH!
|
|
|
Lathe -Heavy Duty Dead Center w/ # 2 MT / DC 173
Hello Folks. Today we have a heavy duty Dead Center with# 2 Morse Taper. 7 1/2" long, shank has minor light surface rust. Please check our Ebay store for other great collectibles. Trains, and tools, and as always don't hesitate to email us with any questions you may have regarding our items. We appreciate you. And thank you for shopping with us today, and as please know we take great care in wrapping your treasures so they arrive to you safely and promplty. We do appreciate your prompt payment, and take PayPal for your convenience. If payment cannot be made within 3 days please contact us to let us know, so we can make other arrangements such as a US Postal MO. We do turn over all unpaid items to Ebay for collection, and for credit on all of our Ebay fees.
|
|
 |