|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$70.00 Shipping Condition: Used Location: Ukraine P40112 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics: Device ... moreis designed to transfer of electrical resistance values from standard Р40114 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40112( MMEC) in measuring DC circuits. Nominal Value: 10 Mohm; High Accuracy class: 0.01-0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 5 Ohm; S equential connection 10 7 Ohm; Nominal connection of 1 stage 10 6 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years. Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 3 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40112 1 General information about device 1.1. Resistance standards Р40112 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40112( MMEC) in measuring DC circuits. 1.2. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40112 working conditions: ambient temperature(20 ± 5) ° C(for Р40115- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mmHg) 2 Technical characteristics 2.1. Main parameters of standard Р40112 are shown in Table 1. 2.2. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. 2.3. Standard P40112 are restorable. Repairable and multifunction devices. 2.4. Acceptable basic deviation limit of resistance standard Р40112( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% atmospheric pressure 84-106.7 k
Buy It Now
Free Shipping Condition: New Location: China Used as a high-power LED constant current drive module;. Short circuit protection: Yes. With current-limiting protection function, the module will not ... morebe burnt out even if the output is short-circuited.
Buy It Now
$75.00 Shipping Condition: New – Open box Location: Ukraine P40102 is designed for use as a multivalued resistance box in DC circuits. Also we can provide other resistance, capacitance and inductance standards, ... moredecade box and other etalons. Maximum power dissipation values on level are equal to nominal shown in Table 2.
Buy It Now
Free Shipping Condition: New Location: China Features: Brand new and high quality. Model: STM32F103C8T6. Core: ARM 32 Cortex-M3 CPU. Debug mode: SWD. 72MHz work frequency. 64K flash memory. 20K SRAM. ... more2.0-3.6V power. I/O. Reset(POR/PDR) 4-16MHz crystal. On-board Mini USB interface. You can give the board power supply and USB communication. Size:5.3cm x 2.2cm. Package Included: 1 x STM32F103C8T6 Board NO Retail Box. Packed Safely in Bubble Bag. The items you ordered will be shipped out in 1-2 business day by Hong Kong Air Mail when your payment is clear. The arrival time is 5-20 business days to United States usually. We ensure dispatch the item within 1-2 business days. However. You bought the item from opposite side of the earth, so it needs a little longer time to deliver. Please place order only if you agree with the shipping time and all the terms below. Customs duty is obligation and liability of a citizen in your country. So buyer should be responsible for any tax and custom duty incurred. Generally, the delay or failure delivery is sometimes caused by the policy of different customs. For example, Laser Pointer is unacceptable in some countries. Therefore, please double check your local customs policy carefully before purchase. Or, we will NOT be responsible for any failure delivery related destination customs issue. We accept PayPal only. Payment must be received in 5 business days of auction closing. Please leave note for your special request(e.g. Colors or Size) in PayPal when you pay the order. Any special request cannot be accepted after 24 hours of payment. Because most of orders will be processed instantly and same day dispatched. If the item is defect when you receive it or you are not satisfied with it. Please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it. If is item is defective in 12 months. You can return it to us. We will send you a new replacement after receiving the defective item.
Buy It Now
$25.00 Shipping Condition: New – Open box Location: Ukraine P331 Coil. Unevalued resistance standard resistor. USED. P331 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 100 Ohm. For sale is one coil) I sold a more then 70 units of this devices types. That is why now in stock I had units with scratches. Cracks and cleavage of the case and panel. Please take a look the picture. Also I had no enough units with class 0.01. That is why I can send you unit with class 0.02. I will choose the best one used device I had in my stock. It will be tested and 100% workable. I give you a warranty for 1 year. I Also I had new devices please take a look them by the link: http:stores.ebay.com/electro-radio-device-high-precision/Resistance-Standards-Boxes-i.html?fsub=3003745013. Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 100 P331 100 8 20 2 20 10 0.1 0.025 0.1 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P331 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal
Buy It Now
$110.00 Shipping Condition: Used Location: Ukraine Resistance box P4834. Total resistance:1 111 111.10 Ohm =1111.111kOhm;. Also we can provide other resistance, capacitance and inductance standards, decade ... morebox and other etalons. Nominal Value of resistance of one decade, Ohm: 10.
Buy It Now
$70.00 Shipping Condition: Used Location: Ukraine P40114 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics. Device ... moreis designed to transfer of electrical resistance values from standard Р40114 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40114( MMEC) in measuring DC circuits. Nominal Value: 1 Gohm; Total measureg range: 0.01-1GOhm; High Accuracy class: 0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 7 Ohm; S equential connection 10 9 Ohm; Nominal connection of 1 stage 10 8 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years; Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 2.6 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40114 1 General information about device 1.1. Resistance standards Р40114 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40114( MMEC) in measuring DC circuits. 1.2. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40114 working conditions: ambient temperature(20 ± 5) ° C(for Р40115- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mmHg) 2 Technical characteristics 2.1. Main parameters of standard Р40114 are shown in Table 1. 2.2. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. 2.3. Standard P40114 are restorable. Repairable and multifunction devices. 2.4. Acceptable basic deviation limit of resistance standard Р40114( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% a
Buy It Now
$70.00 Shipping Condition: New – Open box Location: Ukraine P40113 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics: Resistance ... morestandard Р40113 d esigned: to transfer electrical resistance values from standard Р40113 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40113( MMEC) in measuring DC circuits. Nominal Value: 100 Mohm; Total measured Value: 1- 100 Mohm; High Accuracy class: 0.01-0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 6 Ohm; S equential connection 10 8 Ohm; Nominal connection of 1 stage 10 7 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years. Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 2.6 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40113 General information about device Resistance standards Р40113 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40113( MMEC) in measuring DC circuits. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40113 working conditions: ambient temperature(20 ± 5) ° C(for Р40113- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mm Hg) Technical characteristics Main parameters of standard Р40113 are shown in Table 1. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. Standard P40113 are restorable. Repairable and multifunction devices. Acceptable basic deviation limit of resistance standard Р40113( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% atmosphe
Buy It Now
$70.00 Shipping Condition: New – Open box Location: Ukraine Standard P40111 are restorable, repairable and multifunction devices. Resistance standard’s P40111 ( MPEC)acceptable resistance change (instability )does ... morenot exceed values inp.2.4 and 2.5. after a yearfrom the date of first attestation.
Buy It Now
$70.00 Shipping Condition: New – Open box Location: Ukraine P40112 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics: Device ... moreis designed to transfer of electrical resistance values from standard Р40114 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40112( MMEC) in measuring DC circuits. Nominal Value: 10 Mohm; High Accuracy class: 0.01-0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 5 Ohm; S equential connection 10 7 Ohm; Nominal connection of 1 stage 10 6 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years. Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 3 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40112 1 General information about device 1.1. Resistance standards Р40112 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40112( MMEC) in measuring DC circuits. 1.2. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40112 working conditions: ambient temperature(20 ± 5) ° C(for Р40115- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mmHg) 2 Technical characteristics 2.1. Main parameters of standard Р40112 are shown in Table 1. 2.2. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. 2.3. Standard P40112 are restorable. Repairable and multifunction devices. 2.4. Acceptable basic deviation limit of resistance standard Р40112( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% atmospheric pressure 84-106.7 k
Buy It Now
$90.00 Shipping Condition: Used Location: Ukraine Standard P40111 are restorable, repairable and multifunction devices. Resistance standard’s P40111 ( MPEC)acceptable resistance change (instability )does ... morenot exceed values inp.2.4 and 2.5. after a yearfrom the date of first attestation.
Buy It Now
$70.00 Shipping Condition: Used Location: Ukraine P40113 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics: Resistance ... morestandard Р40113 d esigned: to transfer electrical resistance values from standard Р40113 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40113( MMEC) in measuring DC circuits. Nominal Value: 100 Mohm; Total measured Value: 1- 100 Mohm; High Accuracy class: 0.01-0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 6 Ohm; S equential connection 10 8 Ohm; Nominal connection of 1 stage 10 7 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years. Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 2.6 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40113 General information about device Resistance standards Р40113 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40113( MMEC) in measuring DC circuits. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40113 working conditions: ambient temperature(20 ± 5) ° C(for Р40113- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mm Hg) Technical characteristics Main parameters of standard Р40113 are shown in Table 1. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. Standard P40113 are restorable. Repairable and multifunction devices. Acceptable basic deviation limit of resistance standard Р40113( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% atmosphe
Buy It Now
$20.49 Shipping Condition: New Location: Madison Heights, United States 1 block, 1.005mm.
Buy It Now
$20.49 Shipping Condition: New Location: Madison Heights, United States GGG-G-15C and Conform to MIL-STDD-45662A. with serial number and size.
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$2.99 Shipping Condition: New Location: China Due to the different monitor and light effect, the actual color of the item might be slightly different from the color which is showed on the pictures. ... moreNon-linear value: ±1/4℃;. Scaling factor: linear +10.0mV/℃;.
Buy It Now
Free Shipping Condition: New Location: China Due to the different monitor and light effect, the actual color of the item might be slightly different from the color which is showed on the pictures.
Buy It Now
$3.99 Shipping Condition: New Location: China Due to the different monitor and light effect, the actual color of the item might be slightly different from the color which is showed on the pictures.
Buy It Now
$5.85 Shipping Condition: New Location: China
Buy It Now
$3.98 Shipping Condition: New Location: China Camera& DSLR Studio& Video Camera Bag Home& Garden Solar LED Light Plant Grow Light Massager& Health Sporting Goods Other Introduction: ... moreLM35DZ TO-92 LM35 Precision Temperature Sensor The LM35 series are precision integrated-circuit temperature sensors. With an output voltage linearly proportional to the Centigrade temperature. Thus the LM35D has an advantage over linear temperature sensors calibrated in ° Kelvin. As the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling. The LM35D does not require any external calibration or trimming. Low cost is assured by trimming and calibration at the wafer level. The low output impedance. Linear output, and precise inherent calibration of the LM35D make interfacing to readout or control circuitry especially easy. The device is used with single power supplies. Or with plus and minus supplies. As the LM35 draws only 60 μA from the supply, it has very low self-heating of less than 0.1°C in still air. The LM35D is rated to operate over a 0°C to +100°C temperature range. Features: Calibrated Directly in ° Celsius(Centigrade) Linear + 10 mV/°C Scale Factor 0.5°C Ensured Accuracy(at +25°C) Suitable for Remote Applications Low Cost Due to Wafer-Level Trimming Operates from 4 to 30 V Less than 60-μA Current Drain Low Self-Heating. 0.08°C in Still Air Nonlinearity Only ±¼°C Typical Low Impedance Output. 0.1 Ω for 1 mA Load Package Included: 10x LM35DZ Precision Temperature Sensor We accept PayPal only, All major credit cards are accepted through our secure payment processor PayPal. Payment must be received within 7 days of auction closing. If you have bought multiple items from me. You can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review. Items will be shi
Buy It Now
$110.00 Shipping Condition: New – Open box Location: Ukraine Resistance box P4834. Total resistance:1 111 111.10 Ohm =1111.111kOhm;. Also we can provide other resistance, capacitance and inductance standards, decade ... morebox and other etalons. Nominal Value of resistance of one decade, Ohm: 10.
Buy It Now
Free Shipping Condition: Neu Location: China Vergaser-Reparatursatz für Honda GX120 GX160 GX200 5.5HP 6.5HP Small Engine. Drahtschutz: Edelstahl. Nennspannung: 300V. Kompakt, leicht und langlebig. ... more2x Kohlefaser Side Gear Shift Panel Cover Trim für Audi A4 B9 2017 2018 2019 20.
Buy It Now
$3.98 Shipping Condition: New Location: China Due to the different monitor and light effect, the actual color of the item might be slightly different from the color which is showed on the pictures.
|
|
|
 |