Ohm Standard Resistor Optics Positioner Laser Optics Bin 3 Unknown Optics Laser Optical Bin 3 Current Calibrator Calibrator Standard Pneumatic Calibrator Cable For Accelerometer Omega Calibrator Ea Optics Thermocouple Calibrator Optics Bin 4 Standard Inductor Unknown Application Calibrator 0 Piezoelectric Accelerometer Calibration Vibration Optical Bin 1 Optical Bin 3 Precision Calibrator Loop Calibrator Resistance Standard Voltage Standard Dead Weight Tester Tester Calibrator Resistance Decade Multifunction Calibrator Vintage Microscope Objective Guildline Calibrator Tested Frequency Standard Oscillator Ac Calibrator Portable Calibrator Process Calibrator Laser Optics Bin 1 Standard Capacitor Altek Calibrator Dc Calibrator Altek Model Decade Resistance Decade Resistance Box Hp Calibration Kit Ohm Resistance Standard Mil Spec Laser Optics Decade Resistor Mil Spec Laser Optical Optics Bin 3 Torque Tester Fluke Standard Esi Resistor Druck Calibrator Optics Assembly Huge Optics Dead Weight Pcb Accelerometer Fluke 5100B Transmation Pps Mm Dia Fl Optics Window Ametek Calibrator Dc Voltage Calibrator Optical Mounted Prism Laser Optics Optics Coated Lens Lens Mil Spec Laser Optics Pressure Calibration Flow Calibrator Calibrator Type Calibrator Thermometer Documenting Process Calibrator Fluke 5100B Calibrator Optics Fixture Iet Digital Calibrator Hp Calibrator Newport Optics 10-32 For Accelerometer Optics Prism Rubidium Frequency Standard Rubidium Standard Transmation Druck Dpi Optics Device Rubidium Frequency Mm Laser Optics Standard Resistor Temperature Calibrator Standard Cell Rtd Calibrator Bliley Quartz Pcb Piezotronics Piezotronics Quartz Crystal Frequency Altek Calibration Fixture Calibrator Hart Leitz Wetzlar Germany Microscope Frequency Calibrator Pure Chemical Coated Laser Optics Tektronix Calibration Calibration Model Calibrator Free Shipping Nist Calibrator Microscope Ocular Genrad Gr Gr General Radio Genrad Pressure Module Optical Prism Optics Coated Filter Rubidium Optics Glass Melles Griot Optics Voltage Calibrator Hart Scientific Torque Calibrator Thermometer Calibrator Dc Voltage Standard Programmable Calibrator Dry Calibrator Optics Lens Convex Datron Transmation Model Meter Calibrator Bliley Calibration System Torque Analyzer Filter Laser Optics Quartz Oscillator Optical Coated Optics Beam Splitter Calibrator Source Radio Genrad Vibration Sensor Verification Kit Calibrator Module Optics Micrometer Endevco Nice Optics Ametek Jofra Infrared Laser Optics Lamp Microscope Bin 11 Ea Lamp Dc Reference Standard Resonator Frequency Reference Standard Endevco Meggitt Accelerometer Accelerometer Pressure Charge Amplifier Guildline Standard Resistor- Accuracy 9330 Portable Pressure Calibrator Electro Scientific Industries Voltage Current Calibrator Calibration Standard Decade Capacitor Endevco Model Range Calibrator Ge Druck Dpi Bin Pmel Dead Weight Pressure Meter Calibration Resistance Calibrator Fluke 5700A Microscope Objective Optics Valhalla Scientific Leeds Northrup Primary Flow Calibrator Calibrator Multimeter Japan Optics Frequency Standard Calibrator Signal Resistor 100 Mirror Laser Optical Low Noise Cable Japan Microscope Beam Splitter Bliley Crystal Multifunction Process Calibrator Short Load Voltage Divider Dry Block Calibrator Mirror Laser Optics Torque Meter Nist Mirror Filter Optics Flat Calibrator Pump Transfer Standard Chip Resistor Calibration Test Datron Wavetek Analyzer Calibrator Positioner Stage Efratom Genrad Precision Decade Bin 7 Fluke Hart Scientific
 In 
 
Order by: 
Available to: 
Price: 
 - 
$
6.09
Buy It Now
$2.98 Shipping
Condition: Neu
Location: China
6Pcs/Set PTFE Magnetic Stirrer Mixer Type C PTFE Cover Stirred Solution Use. 6 x Magnetic Stirrer Bar. Material : PTFE and high-quality permanent magnet ... moremagnet. Type: Type C. Light in weight. Color: white.
$
46.79
Buy It Now
$6.75 Shipping
Condition: New
Location: China
DZ158-125 High Power Micro Circuit Breaker MCB Air Circuit Breakers Type C Disconnectors AC230/400V 6kA. Rated short-circuit breaking capacity Icn(A):6kA. ... moreNumber of Poles: 1 Pole, 2 Pole, 3 Pole, 4 Pole.
$
168.00
Buy It Now
Free Shipping
Condition: New
Location: China
DA-3006-5V-232 digital angle sensor Hall waterproof RS232 absolute value hexadecimal programmable. Digital communication serial port: RS232 baud rate ... more9600 (default). Digital communication serial port: RS232.
$
6.75
Buy It Now
$4.54 Shipping
Condition: Brand New
Location: Australia
Mounting Size: 22mm. Switch Housing Material: Plastic. Insulation resistance: ≥100 (MΩ). Nut torque: 0,8 ~ 12Nm. 1x Latching Push Button Switch. Model: ... moreSelf-locking flat button LA38-11T. Head protection level: IP65.
$
398.94
Buy It Now
$41.82 Shipping
Condition: Neu
Location: Hong Kong SAR China
MASTECH MS7220 THERMOCOUPLE CALIBRATOR MIB-INSTRUMENTS"Can Buy It Now in my ebay store" MS7220 THERMOCOUPLE CALIBRATOR FEATURES MS7220 Thermocouple ... moreCalibrator is a precise source and measurement tool for calibrating thermocouple instruments through a thermocouple mini jack. The calibrator can be indicated in units of °C. °F, or mV. Measure temperature from TC output• Simulate TC output• Operable with eight types of thermocouples• Calibrate linear TC transmitter with mV source function• Selectable °F or °C SPECIFICATIONS Measure/ simulate thermocouple Measure/ simulate mV Range-200 to 1800°C. Depending on type-10 to75mV Resolution 0.1°C 0.01mV Accuracy ±(0.3°C + 10µV) ±0.02% Note: 8 TC types; J K T E N R S B per NIST 175 and ITS-90 Weight: Approx. 350g(including battery) Size: 190mm × 89mm × 42mm Battery: Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V Payment Shipping We accept Paypal. Credit card through Paypal. Buyer may need to pay for import tax depend on your country's custom. You can ask us for more detail. We ship to international and item will be shipped by airmail from HongKong. Items are shipped within 2-3 business day after receive cleared payment. An additional USD8 for insurance Most item will arrive within 8-14 business days. It depend on your location. In some case. Ship to some countries will take over 3 weeks, especially brazil. Italy and France. My Other Auctions My eBay Store MIB-INSTRUMENTS Image hosting and auction templates from www.MIB-INSTRUMENTS.com. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
975.18
Buy It Now
$41.82 Shipping
Condition: Neu
Location: Hong Kong SAR China
MASTECH MS7212 MULTI-FUNCTION PROCESS CALIBRATOR MIB-INSTRUMENTS"Can Buy It Now in my ebay store" MS7212 MULTI-FUNCTION PROCESS CALIBRATOR FEATURES• ... moreMeasure V. MA, Ω, frequency, temperature, 40000 reading max• Source V. MA, frequency, high resolution, voltage and current is scale up in 0 to 99 steps, and output echelon voltage and current• With PC photoelectricity interface. Transfer the results to a PC, save and print transfered data and data waveform in special software• With measure and source two functions. Show and control in double display• 32 function keys and numeric keys. Setup and modify source value by numeric keys in source mode Output power: 15V 25mA SPECIFICATIONS Measure(DMM) Range(full scale) Accuracy( of reading + digits) 400.00mV DC 4.0000V DC 40.000V DC 300.00V DC 400.00mV 4.0000V AC 40.000V AC 300.00V AC 400.00mA DC 400.00mA AC 400.00Ω 4.0000kΩ 40.000kΩ 400.00kΩ 4Hz ~ 99.99Hz 100Hz ~ 5Hz 5kHz ~ 30kHz-50°C ~ 1300°C 0.025% + 10 0.025% + 5 0.025% + 5 0.025% + 5 0.7% + 20 0.7% + 10 0.7% + 10 0.7% + 10 0.1% + 10 0.7% + 10 0.1% + 10 0.1% + 10 0.1% + 10 0.1% + 10 0.05Hz 0.5Hz 2Hz 0.3% + 1°C Source Range(full scale) Accuracy( of reading +% of full scale) 100.000mV DC 5.0000V DC 15.000V DC 25.000mA 20Hz ~ 5000Hz 0.025% + 0.03% 0.025% + 0.02% 0.025% + 0.02% 0.02% + 0.02% 0.02% You can download the reference files from Payment Shipping We accept Paypal. Credit card through Paypal. Buyer may need to pay for import tax depend on your country's custom. You can ask us for more detail. We ship to international and item will be shipped by airmail from HongKong. Items are shipped within 2-3 business day after receive cleared payment. An additional USD8 for insurance Most item will arrive within 8-14 business days. It depend on your location. In some case. Ship to some countries will take over 3 weeks, especially brazil. Italy and France. My Other Auctions My eBay Store MIB-INSTRUMENTS Image hosting and auction templates from www.MIB-INSTRUMENTS.com. Powered by The free listing tool.
$
398.94
Buy It Now
$41.82 Shipping
Condition: Neu
Location: Hong Kong SAR China
FEATURES MS7222 RTD Calibrator is tool for calibrating RTD(Resistance Temperature Detector) transmitters. Including the most pulsed transmitters. It simulates ... moreand measures seven different types of RTDs in units of °C or °F and resistance in units of ohms. It can not be source and measurement tool simultaneously. Measure temperature from RTD output• Simulate RTD output• Operable with seven types of RTD• Simulate additional RTD using Ohms output function• Selectable °F or °C SPECIFICATIONS: Measure/ simulate Ohm Range Input Accuracy Four-Wire +/Ω Output Accuracy +/Ω Admissible Driving(mA) 0.00Ω-400.00Ω 0.1 0.1 0.1-3.0 400.0-1500.0Ω 0.5 0.5 0.05-0.8 1500.0-3200.0Ω 1 1 0.05-0.4 Admissible Driving only for Output mode; The OHM meter or RTD tester connect the calibrator has Admissible Driving Current; This device Driving Current: 0.2mA; MAX input voltage: 30V• Measure/ simulate RTD: RTD Types Range ℃( ℉) Accuracy( ℃) Admissible Driving(mA) Input Output 4W 2W/3W Pt10 385-200.0~800.0(328.0~1472.0) 1.5 1.5 1.5 0.1~3.0 Pt50 385-200.0~800.0(328.0~1472.0) 0.3 0.5 0.5 0.1~3.0 Pt100 385-200.0~800.0(328.0~1472.0) 0.3 0.4 0.4 0.1~3.0 Pt200 385-200.0~630.0(328.0~1166.0) 0.2 0.4 0.4 0.1~3.0 Pt500 385-200.0~630.0(328.0~1166.0) 0.2 0.4 0.4 0.05~0.8 Pt1000 385-200.0~630.0(328.0~1166.0) 0.2 0.4 0.4 0.05~0.4 Pt100 JIS-200.0~800.0(328.0~1472.0) 0.3 0.4 0.4 0.1~3.0 Admissible Driving only for Output mode; The OHM meter or RTD tester connect the calibrator has Admissible Driving Current; This device Driving Current: 0.2mA; MAX input voltage: 30V Weight: Approx. 350g(including battery) Size: 190mm X 89mm X 42mm Battery: Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V(1) Note: 1.1) This item is MS7222; 1.2) This item is shipped by EMS or DHL; 1.3) The original manual is Chinese but we can email the English version manual. Sorry for the inconvenience! 2) Shipping time: 2.1) Registered Airmail: About 3-4weeks USA. UK. Australia. Canada; 4-6weeks to West Europe. East Asia; 6-8weeks to
$
426.09
Buy It Now
$41.82 Shipping
Condition: Neu
Location: Hong Kong SAR China
Audio Video Accessory. Mini Switch / Selector. Loop power 24V ±10% The max.output current is 25mA. The max.overlaod is 1kΩ at 20mA range when the power ... moreis higher than 6.8V. The max.overlaod is 700Ω at 20mA range when the power is higher than 5.8-6.8V.
$
376.77
Buy It Now
$41.82 Shipping
Condition: Neu
Location: Hong Kong SAR China
Shop All Categories Batteries Card Readers GPS- UT713 Process Calibrator Thermocouple J/K/T/E/R/S/B/N/L/U 500&this.width/this.height/500) 780)this.width=780; ... more80&this.width/this.height/75) 75)this.width=75; 80&this.width/this.height/75) 75)this.width=75; 80&this.width/this.height/75) 75)this.width=75; 80&this.width/this.height/75) 75)this.width=75; 80&this.width/this.height/75) 75)this.width=75; 80&this.width/this.height/75) 75)this.width=75; 80&this.width/this.height/75) 75)this.width=75; The UNI-T Model UT713 Thermocouple Calibrator is a precise source and measurement tool for calibrating thermocouple instruments. The calibrator sources or measures mV or 8 different type of TC in units of ℃ ℉. But the Meter cannot uses as an output source and measurement. MicrosoftInternetExplorer4 0 2 DocumentNotSpecified 7.8 Normal 0 Specification: Basic Functions Range Best Accuracy Measure/ Source Voltage-10~110mV/110~1100mV ±(0.04%+2) Measure/ Source Thermocouple: J/K/T/E/R/S/B/N/L/U ±0.04%±1 o C Special Functions Temperature coefficient ±0.005%Range/ o C Cold Junction Tolerance ±0.5 o C Criterion Thermometric Scale √ Graduation Thermometric Scale √ Low Battery Display √ General Characteristics: Power 9V Battery(6F22) not included) LCD Size 40 x 63mm Product Color Red and Grey Product Net Weight 410g Product Size 96 x 193 x 47mm Standard Accessories Test Lead. Battery, English Manual, Carrying Bag Standard Individual Packing Gift Box Standard Quantity Per Carton 24pcs Standard Carton Measurement 610 x 450 x 355mm(0.097 CBM Per Standard Carton) Standard Carton Gross Weight 19kg 1 x Operating Manual 1 x Test Lead 1 x Alligator Clip This item is 100% Brand New. Never used. It comes with 2 Months Warranty by Seller. The warranty enables the buyer to receive warranty repair or replacement from the term length described in the sale. Situations NOT covered by this warranty include physical damage to the item(dropping/impact damage. Water damage, exposure to extreme heat/cold
$
2371.46
Buy It Now
$41.82 Shipping
Condition: Neu
Location: Hong Kong SAR China
AV accessory. Mini Switch / Selector. Soldering Rework station. Soldering Station. LED products. Liquid Crystal Display;White LED for backlight. Thermocouple ... moreR 0℃~1767℃ 1℃ 0~100℃:1.5℃ By using ITS-90 temperature scale;The accuracy does not include the error of internal temperature compensation caused by a sensor;.
$
975.18
Buy It Now
$41.82 Shipping
Condition: Neu
Location: Hong Kong SAR China
3、 The accuracy of the temperature probe: ±0.2℃. of internal temperature. temperature scale;The accuracy. 385 -200.0℃~800.0℃ -200.0~0.0℃: 0.3℃ By using ... moretemperature scale. By using ITS-90 temperature.
$
703.69
Buy It Now
$41.82 Shipping
Condition: Neu
Location: Hong Kong SAR China
Up for sale is 1 pcs Maynuo M9711Programmable Electronic Load Loading 150V 30A 150W Free UPS Ship to USA or Upgrade to UPS delivery service for below ... moreCountry! 1920x1200 Normal 0 false false false EN-US ZH-TW X-NONE MicrosoftInternetExplorer4- United States-Italy-Scotland- United Kingdom(UK) Japan-Singapore-Australia-Luxembourg-Sweden-Belgium-Malaysia-Thailand-Canada-Monaco-Taiwan-Fiji-New Zealand-Vietnam-France-Philipines-Germany-Puerto Rico-Guam-South Korea-India-Spain 1920x1200 Normal 0 false false false EN-US ZH-TW X-NONE MicrosoftInternetExplorer4 1920x1200 Normal 0 false false false EN-US ZH-TW X-NONE MicrosoftInternetExplorer4 1920x1200 Normal 0 false false false EN-US ZH-TW X-NONE MicrosoftInternetExplorer4 Features: Six high speed operation modes: CC.CR,CV,CW,CC+CV,CR+CW Over current. Over voltage, over power, over heat, polarity reversed protection High-luminance VFD screen with two lines& four channels display Intellegent fan system fan will be automatically initiated according to the temperature Soft start time setting. Carrying the power supplier according to the voltage value set Battery testing and short-circuit function Available of dynamic testing and rising edge and falling edge setting Supporting external trigger input and output External current waveform monitor terminal Supporting remote voltage compensation and multidata storage Power-on-self-test. Software calibration and standard rack mount Communication mode: GPIB/RS232/RS485/USB. Application: Production line(cell phone charger. Cell phone battery, electric vehicle battery, switching power supplier, linear power supplier) research insititutes, automotive electronics, aeronautics and astronautics,ships, solar cells fule cell, etc. Specification: Model M9711 Input Rating Power 150W Current 0-30A Voltage 0-150V CC Mode Range 0-3A 0-30A Resolution 0.1mA 1mA Accuracy 0.03%+0.05%FS 0.03%+0.05%FS CV Mode Range 0.1-19.999V 0.1-150V Resolution 1mV 10mV Accuracy 0.03%+0.02%FS 0.03%+0.02%FS CR Mode Range 0.03-10K Oh 0.03
$
780.70
Buy It Now
$41.82 Shipping
Condition: Neu
Location: Hong Kong SAR China
UP for SALE is 1 piece ITECH8511 DC Programmable Electronic Load. ITECH8511 DC Programmable Electronic Load. IT8511 120V / 30A / 150W. CW-MODE Range 0-100W ... more100-150W. CC-MODE Range 0-3A 0-30A. Short Circuit Current ≈30A.
$
98.59
Buy It Now
$6.75 Shipping
Condition: New
Location: China
DZ47-60 Micro Circuit Breaker MCB Air Circuit Breakers Type C AC230/400V 6kA 4kA. Number of Poles: 1 Pole, 2 Pole, 3 Pole, 4 Pole. But it is not suitable ... morefor protecting motors. Model: DZ47-60 Micro Circuit Breaker.
$
21.52
Buy It Now
$3.99 Shipping
Condition: New
Location: China
Rotation angle: 1800°±20°. Starting torque: 3.5-10OmN. Nominal resistance range: 100 Ω~47KΩ. Rated power: 1W (55℃) 0W(100℃).
$
8.71
Buy It Now
Free Shipping
Condition: New
Location: China
This product connects the high-precision, high-reliability NTC thermistor with the PVC wire, and uses insulation and conductive. Adopt a new tool. Temperature ... morerange: -40℃ ~ +. 3-4 Dissipation coefficient in still air at room temperature.
$
895.95
Buy It Now
$41.82 Shipping
Condition: Neu
Location: Hong Kong SAR China
UP for SALE is 1 piece ITECH8512 DC Programmable Electronic Load. ITECH8512 DC Programmable Electronic Load. IT8512 120V / 30A / 300W. CW-MODE Range 0-100W ... more100-300W. CC-MODE Range 0-3A 0-30A. Short Circuit Current ≈30A.
$
3.05
Buy It Now
Free Shipping
Condition: New
Location: China
$
128.50
Buy It Now
$67.76 Shipping
Condition: Used
Location: France
Calibration testwell for the torque ring G 950/100 Paris 9e. Contractual photo Not tested If you want more information or photos, contact me! Other items ... moreare for sale on my eBay store. Do not hesitate to subscribe to see the next announcements. Condition: Used Contractual photo If you want more information or photos, contact me! Other items are for sale on my eBay store. Do not hesitate to subscribe in order to see the next announcements. Condition: Used Delivery service: Delivery at Relais Mondial Relay.
$
299.99
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Spring Valley, United States
Torque Lab Analyzer Mountz TL-50i TL50i Capacity 5 lbf.in Min and 50 lbf.in Max. This item is used and it powers up and appears to be responding to pressure ... moreis applied to the Torque sensor but as you can see the display is not set to zeros as it should when there is no pressure.
$
1050.00
Buy It Now
$17.13 Shipping
Condition: Used
Location: Irvine, United States
Transducerized screwdriver, the Tensor SL is a smart, compact and powerful electronic screwdriver that is the ideal tool for achieving zero-fault production ... morein a wide range of low-torque applications.
$
874.89
Buy It Now
$41.82 Shipping
Condition: Neu
Location: Hong Kong SAR China
This ebay listing include: VICTOR 3125 Insulation Resistance Tester Instruction note: battery not included. Any request please contact us! If you want ... moreto delivery to eastern Europe/ Finland/ Norway. Please ask me about postage before bid. returns Dear buyers. We appreciate your business, if you are satisfied with our service, please leave us a positive feedback and rate the details of the transaction(Detailed Seller Ratings) with a"PERFECT 5 STARS" When you rate the shipping time part please take international transit into consideration. Your recognition will make us more confident to develop business and serve you better. Our goal is to make sure you are a happy buyer and pleasant shopping with us. Please email us before leaving any 1 or 2 ratings. Negative/neutral feedback or open any dispute. We understand the concerns and frustrations you might have. And will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. Our system automatically returns feedback once it is left for us. Shipping(Other countries or remote areas may take longer. If you have not received your shipment within 30 days from payment. Please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! We will NOT be responsible for any delay during delivery including but not limited to customs postage checking. Strike, force majeure etc We will post the item to the address of your Paypal registered. Please ensure your address is correct. If the item returns to us without fault. Buyer will pay the shipping and handling fees again(except if we print a wrong shipping label) Your partner for managing your online business.
$
540.00
Buy It Now
$19.21 Shipping
Condition: New – Open box
Location: Baton Rouge, United States
$
23.89
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Quantity: 1390pcs. 200Pcs Glass Fuse Tube Axial With Lead Wire Fast Blows Fuse 3x10mm 250V US. 120 x Electrolytic Capacitors. 1Pc CY7C68013A-56 EZ-USB ... moreFX2LP USB 2.0 Develope Board Module Logic Analyzer.
$
1050.00
Buy It Now
$18.10 Shipping
Condition: Used
Location: Irvine, United States
Transducerized screwdriver, the Tensor SL is a smart, compact and powerful electronic screwdriver that is the ideal tool for achieving zero-fault production ... morein a wide range of low-torque applications.
$
2.56
Buy It Now
$3.99 Shipping
Condition: New
Location: China
The push button switch is a kind of master electrical appliance with simple structure and wide application. Nut torque: M12. Temperature range: -30℃~+85℃. ... moreInsulation resistance: 100MΩ. Heating current: 0.015Ω.
$
2.99
Buy It Now
$3.99 Shipping
Condition: New
Location: China
RK097N: 3Pin Mono(without Switch). RV097NS: 5Pin Mono(with Switch). RK097G: 6Pin Stereo(without Switch). RV097GS: 8Pin Stereo(with Switch). - Full impedance ... morevalue tolerance: ±20%. - Switch rotation angle: 50° Max.
$
8.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Austell, United States
Tin-plated copper alloy connector with tin plated silicon bronze hardware. Atlanta, GA.
$
16.29
Buy It Now
Free Shipping
Condition: New
Location: China
◆ Wind Turbine Generator. ◆Low torque, small electrical noise. ◆Combined transmission signal and power. Wenn Sie mit Ihrem Kauf nicht 100% zufrieden sind, ... morekönnen Sie das Produkt zurückgeben und eine vollständige Rückerstattung erhalten oder das Produkt gegen ein anderes austauschen, sei es ähnlich oder nicht.
$
4.52
Buy It Now
$2.71 Shipping
Condition: New
Location: China
$
40.00
Buy It Now
Free Shipping
Condition: New
Location: Torrington, United States
Circuit Protector. Trip Unit Type. Electrical Connection. AWG 16.AWG 10 copper. Factory wiring only. range of product. Line Rated Current. 21 °C (70 °F).
$
165.00
Buy It Now
Free Shipping
Condition: New
Location: China
DA-3006-5V-232 digital angle sensor Hall waterproof RS232 absolute value hexadecimal programmable. Digital communication serial port: RS232 baud rate ... more9600 (default). Digital communication serial port: RS232.
$
270.00
Buy It Now
$9.68 Shipping
Condition: New – Open box
Location: Baton Rouge, United States
JM Test Systems is an ISO/IEC 17025 lab accredited by A2LA. JM Test System complies with ANSI/NCSL Z-540 and ISO 10012-1. If a sensor needs to be replaced ... morewe will call with a quote. HOT STICKS, ELECTRICAL GLOVES, BLANKETS, SLEEVES, LIFT TRUCK BUCKET LINERS, ELECTRICAL GROUND CLUSTERS, RUBBER FOOTWEAR.
$
75.00
Buy It Now
$14.18 Shipping
Condition: New
Location: New Stanton, United States
Split core, amperage range: 0 to 30/60/120A AC selectable, Analog output transducer: 4-20mA output, loop powered. The Hawkeye 921 provides accurate load ... moretrending information with a proportional 4-20mA output signal.
$
3.65
Buy It Now
Free Shipping
Condition: New
Location: China
$
2.46
Buy It Now
$3.99 Shipping
Condition: New
Location: China
TOTAL RESISTANCE & TOLERANCE:100Ω-1MΩ 130%. RESISTANCE TAPER: B taper. RESIDUAL RESISTANCE:R
$
914.24
Buy It Now
$41.82 Shipping
Condition: Neu
Location: Hong Kong SAR China
TRANSLATE Arabic Chinese French German Greek Indonesian Italian Hindi Japanese Korean Swedish Portuguese Russian Spanish Fluke 8808A/SU 120V 5.5 Dual ... moreDigital Display Bench Multimeter with SW USB Cable Kit. 0.015 Percent V DC Accuracy, 47 to 440 Hz Frequency The Fluke 8808A/SU benchtop digital multimeter(also known as a multitester) with upgraded software and data cable is a true RMS. Auto-ranging meter for measuring current, voltage, resistance, and frequency in manufacturing and electrical testing and repair applications. The meter includes an ISO 17025 Accredited Certificate of Calibration. The meter comes with a set of detachable test leads. The meter measures 2- and 4-wire resistance, and it has split-terminal jacks for measuring 4-wire resistance using only two leads(2 x 4 test leads sold separately) for improved accuracy. The meter's internal memory can store measurement and configuration data. The user can set high and low limits for pass/fail testing. The meter can also express AC and DC voltage in decibels(dB) the power ratio of decibels to milliwatts(dBm) and percent of the reading relative to a preset reference value. The relative mode stores a reading in memory to use as a zero point for subsequent readings so that multiple readings can be compared. The user has a choice of slow, medium, or fast measurement rate the faster the rate, the less accurate the measurements. The RS-232 port on the meter provides connection to a computer for data transfer and analysis and for remote operation(RS-232-to-USB cable and FlukeView Forms upgraded software are included) Data can be exported in simplified ASCII or Fluke 45 format. Triggers can be set to respond to measurement, bus, front panel, and external inputs. A standby feature turns off the display and ensures the meter will not respond to front-panel, external, or remote command inputs. The meter has a removable handle that can be used to carry or prop up the meter during use.This true RMS(root mean square) meter provides accurate readings when meas
$
1298.00
Buy It Now
Free Shipping
Condition: New
Location: China
Maximum winding width : 108mm. Obtain winding excessive speed detecting function, and it can reduce the winding speed automatically to the most steady ... morestate. Complete appliance weight three phase machine 400W.
$
14.08
Buy It Now
Free Shipping
Condition: New
Location: China
Current: 40A. 10Pcs Ceramic Stone Grinding Rotary Die Grinder Polishing Drill Bit Tool DIY. 10pcs fuse holder (fuse not included). QI Wireless Charging ... moreReceiver Module For Logitech Mouse G403 502 903 GPW G PRO.
$
15.99
Buy It Now
Free Shipping
Condition: New
Location: China
Hello.Welcom! 1.All prodcut not include battery due to the battery and the item which built-in battery is embargoed in air transport; 2.Buyers should ... moreassume the duties and taxes cos different countries have different rate.If you have tax problem,please contact us before buy it. Note: The color of the item may vary slightly due to photography and your own computer Product Specifics: Product: 12 Position barrier terminal block Function: Used in motor. Electrical control, power supply, household appliances, lighting, machinery and other wire connection parts Voltage: 380V Current: 10A Poles: 12 poles(dual row) Connector Diameter: 4 mm Size: About 4.5"L)x0.5"W)x0.8"H) Material: plastic/Zinc alloy Quantity: 10 Colour: White Weight: 166 g Package inculde: 10 x barrier terminal block LM2596S DC-DC Step-down Adjustable Power Supply Module $6.44. 100V to 240V AC Digital PID Temperature Controller Control Rex-C100 4 Digits LED $19.63. Red LM2596 DC-DC 4.5-40V Step Down Adjustable Power Supply Module $5.16. Mini LM2596S DC-DC Step Down Power Supply Module With Short Circuit Protection $5.24. CP2102 USB to TTL 6PIN Module Serial Converter With Wire Cable $6.66. Hot Sale 1 Set Of 433Mhz RF Wireless Transmitter and Receiver Module Green PCB $5.49. Hot Sale US-020 Ultrasonic Distance Measuring Module Support GPIO Transducer $5.73. Mini Adjustable USB Solar DC-DC 5-9 V Power Module For Voltage Adjustment $5.49. New USB 600mA 0.9V~5V Module to 5V Step-Up Boost Module DC-DC Converter $4.71. Hot DC24V 3A Single Axis TB6560 Stepper Motor Driver Board Module For CNC Router $16.19. 110V-240V 60W Electric Welding Solder Soldering Iron Tool Environment Friendly $12.13. White PT100 Type 2m Thermocouple Sensor Probe for Temperature Measure $8.21. PT100 Type 2M Stainless steel Thermocouple Sensor Probe for Temperature Measure $7.77. Mini DC-DC Digital display LM2596 Voltage Step Down Converter Regulator Module $7.57. USB to RS232 Serial Adapter PL2303 Converter TTL Cable Module Console Recovery $5.44. Shipping Payment Return
$
1280.67
Buy It Now
$384.20 Shipping
Condition: New
Location: China
Torque Coil Winding Machine Cnc Winder Large Wire Automatic Computer. 6,Obtain winding excessive speed detecting function, and it can reduce the winding ... morespeed automatically to the most steady state.
$
6.29
Buy It Now
$3.99 Shipping
Condition: New
Location: China
DZ47-60 Micro Circuit Breaker MCB Air Circuit Breakers Type C AC230/400V 6kA 4kA. ● Number of Poles: 1 Pole, 2 Pole, 3 Pole, 4 Pole. But it is not suitable ... morefor protecting motors. ● Model: DZ47-60 Micro Circuit Breaker.
$
4.75
Buy It Now
$4.50 Shipping
Condition: New
Location: China
Quantity: 600pcs (30 valves, each has 20pcs). 900pcs Rivnut Stainless Steel Rivet Nut Tool Nutsert Tool Kit Mandrels Kit Mixed. ER-25/32/40 Hex+Square ... moreCollet Block Chuck Holder For CNC Lathe Grinders Tool BE#.
$
17.08
Buy It Now
$3.00 Shipping
Condition: New
Location: China
SimpleFOC Shield V1.3.3 for Arduino is a low-cost, modular and user-friendly alternative for running gimbal BLDC motors with FOC algorithm. - Stackable: ... moreStackable 2 shields (2 BLDC motors + 2 position sensors).
$
2.91
Buy It Now
Free Shipping
Condition: New
Location: China
$
8.25
Buy It Now
$3.00 Shipping
Condition: New
Location: China
Stable quality and vibration damping. 1pc x Battery Protection Board. We will try our best to avoid any quality problem. Easy to use. Long service life.
$
7.79
Buy It Now
Free Shipping
Condition: New
Location: China
Operation Type: Latching. Mounting Size: 22mm. 1x Latching Push Button Switch. Mounting Type: Flush Mount. Switch Housing Material: Plastic. Nut torque: ... more0,8 ~ 12Nm. Wiring Capability: Quick Connect. Model: Self-locking flat button LA38-11T.
$
68.67
Buy It Now
$3.00 Shipping
Condition: New
Location: China
DGM V1.2 Motor Driver Board DC Motor Driver With Cables For Odrive MIT Single Motor FOC BLDC Servo. DGM Motor Driver Board DGM is a highly integrated ... moreand efficient brushless motor driver which is easy to use.
$
1415.00
Buy It Now
$200.00 Shipping
Condition: New
Location: China
Obtain winding excessive speed detecting function, and it can reduce the winding speed automatically to the most steady state. Maximum winding width :10 ... more0 mm. Complete appliance weight : 45 kg. Windable wire gage :0.03- 2 mm.
$
6.59
Buy It Now
Free Shipping
Condition: New
Location: China
Outside in the use of PE polyethylene protective plastic, transparent appearance, super toughness, extendability, not easy to oxidation, work well. The ... moreinternal conductive part adopts brass firmware and fastening galvanized screw, the conductive performance is high, the insulation performance is good.
$
12.59
Buy It Now
Free Shipping
Condition: New
Location: China
The screw is slot type screw. High elasticity, high temperature resistance, high pressure resistance and impact resistance. 500PCS Sliver Non-insulated ... moreSeamless Butt Wire Connectors 22-16 Ga. Outside in the use of PE polyethylene protective plastic, transparent appearance, super toughness, extendability, not easy to oxidation, work well.
$
3.35
Buy It Now
$1.52 Shipping
Condition: New
Location: China
The highest power: 2000W. So as to achieve dimming, thermostats, pressure effect. High temperature resistant FR - 4 circuit board. With reverse polarity ... moreprotection, high current protection. Size: approx.
$
32.95
Buy It Now
Free Shipping
Condition: New
Location: Springfield, United States
2825XB2H.65 New Altech ABL Sursum DIN Manual Motor Controller Switch Serie V-EA Breaker G1A or G 1A. Part Number 2GU1. Each bid quantity is for One(1) ... moreBreaker. You may bid/ buy any number of lots, up to the total quantity available above. These were purchased at an industrial liquidation earlier this year. And they were brand new in a bulk supplier box. We packaged them in heavy Ziplok bags. According to the manufacturer: G-Trip Two Pole Circuit Breakers. 277 VAC Voltage Rating, 20 lb. in. Terminal Torque UL® listed to UL508 and CSA certified to C22.2 No. 14 V-EA manual motor controllers are horsepower rated for AC across-the-line motor starting. Suitable for motor disconnect means and overload protection. They also can be used for AC general use, AC resistance, AC discharge lamps and AC incandescent lamps. Altech/ABL SURSUM V-EA miniature DIN rail mount circuit breakers provide an opportunity for major cost and installation time savings and superior circuit protection. Six trip characteristics are UL® listed. All trip characteristics are internationally defined and accepted. The“G” characteristic matches USA and Canadian thermal/magnetic trip norms. All rated currents have the same housing dimensions and terminal sizes. The V-EA can be loaded with full rated current(100% breaker) Recognized with Line/Load reversibility, i.e. power feed can be field or factory wired to the screw-cage clamp terminals at the“top, range 18 AWG to 3 AWG, or at the“bottom, range 18 AWG to 2 AWG. The V-EA/U is intended for OEM industrial applications. Technical Specifications. Voltage Rating: 480Y/277 VAC(480 VAC phase-to-phase. 277 VAC phase-to-ground/neutral) Interrupting Capacity: 10 kA with UL® listed RK5 back-up fuse or MCCB. Electrical/Mechanical Endurance: 10.000 ON/OFF operations. Calibration Temperature: 40°C(104°F) Terminal Tightening Torque: 20 in.lb. International Approvals: For various trip characteristics and rated currents. Germanischer Lloyd, SEV, SEMKO, NEMKO, etc. VDE approved on up to 25 A on
$
8.24
Buy It Now
$3.00 Shipping
Condition: New
Location: China
Stable quality and vibration damping. 1pc x Battery Protection Board. Easy to use. Long service life.
$
2.93
Buy It Now
Free Shipping
Condition: New
Location: China
$
1231.00
Buy It Now
$390.00 Shipping
Condition: New
Location: China
Obtain winding excessive speed detecting function, and it can reduce the winding speed automatically to the most steady state. Maximum winding width Complete ... moreappliance weight Windable wire gage .
$
243.79
Buy It Now
$41.82 Shipping
Condition: Neu
Location: Hong Kong SAR China
Fluke 117 Electrician's Multimeter Non-Contact Voltage Digital Display VoltAlert You are bidding on a gently used and excellent working condition ... moreFluke model 117 Electricians multimeter. This auction is for the meter you see pictured with Alligator clips only. There is nothing else included. Currently has used batteries that are in working condition. The meter shows little use with a scuff here or there. No signs of abuse or neglect. Item has been tested and is in excellent working condition. Look at the pictures to get a better idea of the condition and what you are bidding on. Comes as pictured. The Fluke 117 has the features and functions professional electricians need to get their job done. The Fluke 117 is the ideal meter for demanding settings like commercial buildings. Hospitals and schools. The compact design makes it easy to hold and use one-handed. Integrated VoltAlert ™ Technology allows testing for non-contact voltage directly from the meter to help get the job done faster. LoZ technology prevents false readings due to"ghost voltage" and helps accurately diagnose problems. Rely on the Fluke 117 to make your everyday measurements– up to 600 volts ac or dc. 40 MΩ, diode test and exceptionally fast continuity. VoltAlert™ technology for non-contact voltage detection AutoVolt automatic ac/dc voltage selection LoZ: helps prevent false readings due to ghost voltage Large white LED backlight to work in poorly lit areas True-rms for accurate measurements on non-linear loads Measures 20 A(30 seconds momentary; 10 A continuous) Resistance. Continuity, frequency and capacitance Min/Max/Average to record signal fluctuations Compatible with optional magnetic hanger(ToolPak™) for hands free operation CAT III 600 V safety rated Please take a moment to look at my other great auctions. Thanks ccloan CA Residents are required to pay sales tax of 8.50% This will be automatically added to your ebay/paypal invoice when the item is shipped within the state of California. The ebay auction winner is required to
$
7.20
Buy It Now
Free Shipping
Condition: New
Location: United States
The highest power: 2000W. So as to achieve dimming, thermostats, pressure effect. High temperature resistant FR - 4 circuit board. With reverse polarity ... moreprotection, high current protection. Size: approx.
$
8.19
Buy It Now
Free Shipping
Condition: New
Location: China
Operation Type: Latching. Mounting Size: 22mm. 1x Latching Push Button Switch. Mounting Type: Flush Mount. Switch Housing Material: Plastic. Nut torque: ... more0,8 ~ 12Nm. Wiring Capability: Quick Connect. Model: Self-locking flat button LA38-11T.
$
7.89
Buy It Now
Free Shipping
Condition: New
Location: China
Operation Type: Latching. Mounting Size: 22mm. 1x Latching Push Button Switch. Mounting Type: Flush Mount. Switch Housing Material: Plastic. Nut torque: ... more0,8 ~ 12Nm. Wiring Capability: Quick Connect. Model: Self-locking flat button LA38-11T.
1 2 3 4
 In 

Former Listings  
 
Mountz TCA Torque Tester Wrench Calibrator Analyzer Dial 36lbf.in 4Nm 36/4
Search our eBay Store! Mountz TCA Torque Tester Wrench Calibrator Analyzer Dial 36lbf.in 4Nm 36/4 SKU: JV-MAT-C-MOUNTZTCA36 Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Mountz TCA Torque Tester Wrench Calibrator Analyzer Dial 36lbf.in 4Nm Model: Torque Tester TCA 36/4 Physical Condition: Good. Minor scuffs/scratches/sticker residue and signs of use. Functionality/Degree of Testing: Dial moves when socket is rotated. We do not have the necessary resources to further test this unit. Dimensions(L" x W" x H" 3.5*10*6 PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT ... moreREQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the latest inventory updates. I
TORQUE WRENCH CONSOLIDATED DEVICES 1001SMO CALIBRATOR
TORQUE WRENCH CONSOLIDATED DEVICES 1001SMO CALIBRATOR Sold as is. As pictured. Thanks.
MHH Torque Analyzer, Calibrator 0-36 LB-INS
This is an auction for one used MHH Torque Analyzer. With a range of 0-36 LB-INS. The unit looks to be in good working order. It was tested with a torque wrench. And the reading corresponded to the reading on the wrench. If you have any questions or would like any additional testing performed, please contact me. Posted with
ARO INGERSOLL RAND TORQUE WRENCH TESTER CALIBRATOR 8560-B 3/8 DRIVE 100 FT/LB
Up for sale is one ARO torque calibrator In good working condition Comes with all the parts shown in the pictures Any questions are welcome Powered by The free listing tool. List your items fast and easy and manage your active items.
KING NUTRONICS 3695 & 3615 Torque & Force Calibrator 20k ftlbs 0.05% New $45,000
NASA Labratory Excess Acquisition Cost $45.000 The King Nutronics Model 3695 Torque and Force Calibrator is self contained. Semi-automated, multi-functional calibrator that provides a means for rapid, safe, and highly accurate calibration of torque and force measuring instruments. A multifunctional torque and force calibration system designed to generate. Control, measure, and display the rotational forces applied to torque measuring instruments up to 20,000 ft-lbs with an accuracy up to ±0.5% The unit can also be used to test and calibrate linear force measurement instruments up to 5,000 lbs. with an accuracy up to ±0.125% Comes with lots of load cells in many sizes
HIOS ELECTRIC TORQUE TOOL ANALYZER HANDY TESTER CALIBRATOR HWT-1000
HIOS ELECTRIC TORQUE TOOL ANALYZER HANDY TESTER CALIBRATOR HWT-1000 HIOS TORQUE METER ELECTRIC ANALYZER CALIBRATOR! HANDY TESTER! GREAT USED CONDITION! COMES WITH THE FOLLOWING: MODEL# HWT-1000 COMES WITH POWER ADAPTER& CASE! EMAIL US WITH YOUR QUESTIONS! THANKS FOR SHOPPING WITH US! WE OFFER COMBINED SHIPPING SERVICES. BUY TWO OR MORE ITEMS AND GET A DISCOUNT ON SHIPPING! CHECK OUT OUR STORE FOR MORE GREAT DEALS! f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f66dcde28-0x105-
C101240 Desoutter TMP-220 TMP220 Portable Electronic Torque Tester & Calibrator
C101240 Desoutter TMP-220 TMP220 Portable Electronic Torque Tester& Calibrator(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C101240 This Desoutter TMP-220 Portable Electronic Torque Tester& Calibrator looks to be in good cosmetic condition. Showing some minor signs of wear. It powers up, as shown in the photos above, and the digital display is bright and clear, and it gives various readings when the torque knob is turned, and it prints successfully. However, this is the extent of my testing of it, and it is being sold as-is. It comes with a battery charger/power adapter, but it has a UK style 240VAC plug. It also includes operating instructions and a padded carrying case, as shown. Approximate overall unpacked dimensions: 20"L x 17"W x 9"H. Please ... moreask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $43.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 17.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments
URYU UET-10C 0-100 INCH-LBS. DIGITAL TORQUE WRENCH SCREWDRIVER TESTER CALIBRATOR
PLEASE CALL FREE 800-544-3746! LIVE HELP EXPERT ADVICE TECHNICAL SUPPORT 800-544-3746! PLEASE VISIT OUR EBAY STORE. FILLED WITH HUNDREDS OF UNIQUE AND USEFUL ITEMS! CLICK HERE TO GO DIRECTLY TO THE STORE SCROLL DOWN FOR IMPORTANT ITEM INFORMATION URYU UET-10C 0-100 INCH-LBS. DIGITAL TORQUE WRENCH SCREWDRIVER TESTER CALIBRATOR PLEASE CLICK ON PHOTOS FOR LARGER VIEW SCROLL DOWN FOR IMPORTANT ITEM INFORMATION PLEASE READ ALL OF THE FOLLOWING TEXT BEFORE BIDDING. IF YOU NEED MORE INFORMATION, PLEASE CALL ME AT MY TOLL FREE 800-544-3746 9:00AM TO 6:00PM PST MONDAY- FRIDAY AND I WILL BE HAPPY TO ANSWER ANY OF YOUR QUESTIONS. YOUR PURCHASE IS FOR A FULLY TESTED AND GUARANTEED. URYU SEISAKU, MODEL UET-10C, DIGITAL ELECTRONIC TORQUE TESTER, FEATURING SELECTABLE 0-100 IN-LB/ 0-100 KG-CM/ 0-10 NM RANGES, COMPLETE WITH ALL SUPPLIED ACCESSORIES, CHARGER, ... moreMANUAL AND FITTED CARRYING CASE, ALL IN EXCELLENT CONDITION(SEE ALL OF THE PHOTOS FOR DETAILS) FOR A COMPLETE INSTRUCTIONAL MANUAL ON THIS PRODUCT PLEASE CLICK ON THE FOLLOWING HYPERLINK: CLICK HERE FOR A SPEC SHEET ON THIS PRODUCT PLEASE CLICK ON THE FOLLOWING HYPERLINK: CLICK HERE THIS UNIT HAS BEEN COMPLETELY TESTED IN OUR FULLY EQUIPPED LAB AND IS GUARANTEED TO BE WORKING AND MEETING ORIGINAL FACTORY SPECIFICATIONS. I AM SELLING THIS ITEM FULLY GUARANTEED FOR $689.00. THIS PRODUCT IS ORIGINALLY FOR MORE THAN $2.650.00! URYU SEISAKU UET-10C ELECTRONIC TORQUE TESTER B11-1536-81-W All company and product registered trademarks are acknowledged and are the property of their respective companies. PLEASE CALL FREE 800-544-3746! LIVE HELP EXPERT ADVICE TECHNICAL SUPPORT 800-544-3746! PLEASE VISIT OUR EBAY STORE. FILLED WITH HUNDREDS OF UNIQUE AND USEFUL ITEMS! CLICK HERE TO GO DIRECTLY TO THE STORE PLEASE CLICK PLAY ON THE SCREEN BELOW TO VIEW THE DAVID RIDDLE COMPANY INFORMATIONAL VIDEO For further information please call Dave Riddle TOLL FREE 800-544-3746 or LOCAL 818-994-2449. 5 days a week, 9:00am to 6:00pm(California Time) I will be happy to answer
STANLEY T-21 Tool Wrench Torque Calibrator Industrial Transducer Controller Unit
STANLEY T-21 WRENCH TOOL TORQUE UNIT FOR INDUSTRIAL AUTOMATION CONTROLLER! EXCELLENT CONDITION! VOLTAGE 110 50/60 HZ MODEL T21/110 VOLTAGE 110 S/N: 1425 ENCODER TRANSDUCER! EMAIL US WITH YOUR QUESTIONS THANKS. HAVE A NICE DAY! CHECK OUR STORE FOR MORE GREAT DEALS! WE OFFER COMBINED SHIPPING! BUY TWO OR MORE ITEMS AND GET A DISCOUNT ON COMBINED SHIPPING INTO ONE LOW PACKAGE DEAL! WE APPRECIATE YOUR BUSINESS! Powered by The free listing tool. List your items fast and easy and manage your active items.
GSE DATA STAT MODEL 290 Model 290 Calibrator Tool Torque Tester Recorder
GSE TECH MOTIVE DATA STAT MODEL 290! TORQUE TESTER CALIBRATOR! INTERNAL BACKUP BATTERY IS NEW GREAT WORKING CONDITION! 02090-3000 CAN USE AN ADAPTER TO PLUG IT IN TO THE WALL! NOT INCLUDED! CCW CW FARMINGTON HILLS MI USA! EMAIL US WITH YOUR QUESTIONS THANKS. HAVE A NICE DAY! CHECK OUR STORE FOR MORE GREAT DEALS! WE OFFER COMBINED SHIPPING! BUY TWO OR MORE ITEMS AND GET A DISCOUNT ON COMBINED SHIPPING INTO ONE LOW PACKAGE DEAL! WE APPRECIATE YOUR BUSINESS! Powered by The free listing tool. List your items fast and easy and manage your active items.
Torqueleader Model DR36/4 Torque Tester / Calibrator-No Reserve
Torqueleader Model DR36/4 Torque Tester/ Calibrator-Use No Reserve Powered by The free listing tool. List your items fast and easy and manage your active items.
Teledyne Torque Wrench Calibrator LC20-1000
Teledyne Torque Wrench Calibrator LC20-1000 Power cord not included Model: Lc20-1000 Sn: 7871 Shipping Weight: 34 lbs(AEB 175 2.2.B L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no ... morecontrol over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an o
ARO TORQUE TESTER CALIBRATOR 8560-B CALIBRATION MACHINE
Item Description YOU ARE BIDDING ON ONE USED ARO TORQUE TESTER CALIBRATOR. MODEL: 8560-B. WORKING UNIT. GO HERE FOR MORE INFO: Item Photographs Consider This Before Bidding Our Items are sold AS-IS. Please be sure of compatabilities before bidding. Unit is used. With no manual unless otherwise noted above. No software is included in this sate unless otherwise noted above. No power adapter is included in this sale unless otherwise noted above. No batteries are included in this sale unless otherwise noted above. No cords. Or cables, other than those pictured, are included in this sale unless noted above. This unit has not been tested thoroughly. This item may be one of multiple items just like it. Check our other auctions if this auction is not a dutch auction. We usually only take one random picture of the item. You will receive the exact ... moresame part/model number but it might not be the one that is pictured. Policies Buyer to pay shipping and insurance to the 48 contiguous states. Illinois residents pay 9.75% sales tax. Shipping Cost: FREE SHIPPING TO THE LOWER 48 USA. I usually ship once a week. I use UPS Ground. If you need something sooner we can make arrangements. Payment must be recieved within seven(7) calendar days of the end of the auction. If you use PayPal to pay. Your shipping address MUST be confirmed& your account MUST be verified. If you are not I will not accept payment. This item. Just like all of our items, is being sold"AS-IS" This is because we don't warranty anything that we sell. That is why you get such good deals. If we have tested it, we will let you know how we have tested and for how long. Usually no more than just powering a unit up to see that everything boots and works. Software that is factory sealed is what it says it is. Just like when you buy software in your local retail store, you are buying it AS-IS because once you open it, you own it and can't return it. In case there is something missing or disfunctional in the sealed box, then you talk to the manufacturer
GSE 290 ELECTRIC DATA STAT PROFESSIONAL TORQUE TOOL ANALYZER TESTER CALIBRATOR
GSE 290 ELECTRIC DATA STAT PROFESSIONAL TORQUE TOOL ANALYZER TESTER CALIBRATOR GSE 290 DATA STAT TORQUE CALIBRATOR TESTER! GOOD USED WORKING CONDITION! COMES WITH THE FOLLOWING: SERIAL NO. 9770 COMES WITH POWER ADAPTER! WE HAVE THE TORQUE SENSOR TRANSDUCERS IN STOCK! CHECK OUR STORE! EMAIL US WITH YOUR QUESTIONS! THANKS FOR SHOPPING WITH US! WE OFFER COMBINED SHIPPING SERVICES. BUY TWO OR MORE ITEMS AND GET A DISCOUNT ON SHIPPING! CHECK OUT OUR STORE FOR MORE GREAT DEALS!
ATC-25 Torque Tester (Auditor Torque Cube) calibrator
Used and in excellent working condition no damaged or tolerance issues. Torque Tester(Auditor Torque Cube) Features: The“CUBE” is a great entry level tester that packs many features into a small portable package, Versatile mounting design makes testing of pistol or inline tools simple, Bevel washer joint kits allow for precise simulation of the application joint characteristics, Simple. Easy-to-use portable tester, Intuitive Auditor Series menu structure for quick start-up, Bidirectional accuracy of ±1% of indicated reading within top 90% of full scale, Eight(8) available engineering units: oz-in. Lb-in, lb-ft, Nm, cNm, kgf-cm, gf-cm, kgf-m, 3 modes of operation: Track. Peak and 1st Peak, Selectable power tool filtering speeds: 125Hz. 250Hz, 500Hz, 1000Hz and 1500Hz, RS-232 output, NiMh rechargeable batteries provide at least 8-10 hours ... moreof continuous use, For testing power tools. Click, dial and digital wrenches, Unit accuracy is +/5% of indicated reading for the top 90% of full scale Unit is sold as is and in working condition guaranteed money back if this unit dose not work. Shipping allow 1-2 days and free USPS 2-3 days shipping depending on region in united states only. All sales are final unless unit is defective. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14154998e1c-0xfe-
MOUNTZ M-100 0-100 lbf/In DIGITAL TORQUE TESTER CALIBRATOR.
MOUNTZ M-100 DIGITAL TORQUE TESTER CALIBRATOR 0-100 lbf/In 0-1130 cNm The M-100 provides accurate torque testing by simply turning the unit on and adjusting the zero adjustment knob in the track mode until the zero is displayed and held. It can be used in either the TRACK mode or the HOLD mode of operation when memory is desired. Accurately calibrates power and hand tools. FEATURES: Accuracy: +/5% from 20%100% 1% from 10%20% and 2% from 5%10% of full scale. Measures shear strength of materials. Provides accurate digital readout of applied torque values in both right and left hand directions. Measures Shock force. This item is in very good condition. It was calibrated by Mountz in 2011. And it was used once. It has been in storage ever since. ACCESSORIES: Comes with overview sheet. Power supply, 3 power tool attachments, Carry Case, and 14 ... moreDay Warranty.
1000lb 500lb 200lb torque meter tester calibrator computerized 1/2" 1/4"
You are bidding on a very unique torque tester or meter or calibrator. The tester weighs almost 20lbs is is mounted on a 8" x 12" x 1" piece of solid steel. The two larger meters have 1/2" heads and the smaller 200lb meter has a 1/4" head. There all have a wire that has a male printer type connector on the end. The wires will plug right into your printer port if your computer still has one. The cables are 55-58" long and appear to be in good condition. The connectors on the end of the cables have 200. 500 and 1000 printed on them. The base that the 1000 and 500 cables plug into are 4" in diameter at the base and 2" on the 2nd level. The 200lb meter is 8.5" long. The 200lb meter appears to be a power wrench. I have not been able to test the unit so you are buying it AS-IS with no warranties and ... moreno returns. It is a little too large for a Flat Rate Priority Box so I will need to send it Parcel Select. There are no names on the meter except for the small round labels on the 500 and 1000 that show the Serial Number and the range. They are labeled 0-1000 in lbs and 0-500 in lbs. This is a very unique piece of machinery. I wish I could find out more about the meter and who manufactured it. FAQ'S We ship via USPS only. We do not ship internationally. We combine shipping on multiple purchases so do not hesitate to e-mail if you want a combined shipping quote. We ship every day except Sunday. If you would like additional pictures or more information do not hesitate to e-mail. Delivery Confirmation numbers will be provided upon request. All our shipments are sent with Delivery Confirmation or Signature Confirmation. Please e-mail us with questions BEFORE bidding or buying. When applicable we document all serial numbers for your protection and ours. My wife and I are human. We try to honestly describe our products but there are times when there is a discrepancy between the description and the product you receive. If there is a problem. We will take whatever is needed to make o
CDI MODEL 5000-ST SURETEST TORQUE CALIBRATION SYSTEM CALIBRATOR FREE SHIPPING
YOU ARE BIDDING ON A USED CDI MODEL 5000-ST SURETEST TORQUE CALIBRATION SYSTEM. THE CALIBRATOR WAS PURCHASED AT AUCTION AND WAS REMOVED FROM A WORKING ENVIRONMENT. THE CALIBRATOR HAS BEEN POWER UP TESTED BUT NO FURTHER TESTING WAS DONE. SINCE THE THE CALIBRATOR HAS ONLY BEEN POWER UP TESTED WE ARE SELLING THIS ITEM AS-IS. THIS ITEM WILL COME AS PICTURED. SHIPPING TO THE LOWER 48 STATES WILL BE FREE.
GSE DATA-STAT TORQUE TESTER CALIBRATOR 020290-40000
up for sale is GSE DATA-STAT TORQUE TESTER CALIBRATOR 020290-40000 Please see all pictures for items included. If you have any question(s) please let us know before bidding. Ask Questions Before Bidding. Make sure This Is the item You Want. No Returns Just Because You Failed To Read The Details. This item will be shipped from Ontario. Canada via the Canada Post. Happy bidding and good luck!
* GSE Inc. Torque Calibrator Model 229-D
Description Conditions Up for auction is a GSE Inc. Torque Calibrator Model: 229-D Tested to powers on via Power Cord. Unit does not hold charge. This unit is in good physical condition as pictured. Some minor wear and tear is expected on a used item. Only items pictured are included. Please refer to the pictures for more details. Notice to all Bidders Warranty Information No Software. Cables, Manuals Or further Hardware Included. Bidders are expected to do their own research in regard to the compatibility and hardware/Software requirements for any item they are considering purchasing. As well as any necessary configurations needed for allowing correct operations and system functionality. This item is covered by our 30 Day Warranty for TEST completed. And CONDITIONS as described above. Otherwise item is sold"as is" and carries no ... morewarranty. Implied or other. Batteries: are considered disposable item and are not warrantied. About Us Payment Details Shipping Policy Maven Technologies. LLC was founded in 1998 as an asset recovery company specializing in technology assets. Today. We are Western New York's largest asset recovery provider. We are here to provide you with affordable products along with impeccable service. Contact Us 1450 Lyell Avenue Rochester. NY 14606(585) 458-2460 Ext. 252 Other Information Bid with Confidence Check our Feedback rating! View our. New Jersey and New York residents will pay required sales tax. For PayPal(which is preferred) payments. An email will be sent to notify us when you have paid. For Visa. Or MasterCard, payments, you can either email or call us with the appropriate information. Payments must be received 3 days after auction close. Items which are unclaimed or undeliverable will be considered abandoned 45 days after payment. Shipment of your item will occur within 2-5 business days after payment has been received. Free or Flat shipping and handling applies to Continental USA only. Alaska. Hawaii, Puerto Rico, Virgin Islands and Canada have extra charges depending u
Torque Master Torque Leader Calibration Calibrator Transducer VAT INC
Description. Torque Master Torque Leader Complete exactly as pictured- very good condition Fully operational More info can be found here: VAT INVOICE WILL BE SUPPLIED £400 + VAT = £480 COLLECTION WELCOME AT OUR WAREHOUSE IN BA140X. ITEM WILL BE SENT VIA FULLY INSURED COURIER Please contact us for international shipping costs U K VAT IS NOT APPLICABLE OUTSIDE THE EU NON-UK EU VAT REGISTERED BUSINESS' ARE ALSO NOT REQUIRED TO PAY VAT PLEASE EMAIL TO DISCUSS VAT REDUCTION. Please use the eBay message system to communicate with us. This is for the protection of both the bidder/buyer and ourselves in the event of a dispute. We will NOT respond to emails sent outside the eBay message system PLEASE CALL 07866086553 OR EMAIL Please use eBay messaging system FOR A BETTER PRICE
Waters Talley Torque Calibrator 6500-T4
Torque wrench torque watch calibrator using standard mass(weights) Simple to operate. Has all four original weights: 5. 2, 8.5 and 42.5 ounce.
CDI TORQUE TRANSDUCER , RANGE 20 - 250 Ft. Lbs. 342-11-0 , 1/2" DRIVE CALIBRATOR
CDI TORQUE TRANSDUCER. PART OF TRANSDUCER KIT 2000-11-02 PART# 342-11-0. TRANSDUCER ONLY, DOES NOT COME WITH SOCKET, CUP ADAPTER OR BRACKET RANGE: 20- 250 FOOT POUNDS DRIVE: 1/2" VERY CLEAN USED TOOL ITEM# 420 SHIPPING TO U.S.A. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-145e2621462-0x106-
Torque Calibrator GSE Inc Model 220
I know nothing about this. It was my fathers. He told me it as used for checking torque. The last time he used it. It worked fine. Took a photo of it turned on as well. Batteries were removed for shipping. It is heavy. Its is being sold AS IS. Sorry if shipping is high. It is heavy. If there is a difference I will refund.
GSE INC. 115VAC TORQUE CALIBRATOR, 229-D *WITHOUT LID*
GSE INC. 115VAC TORQUE CALIBRATOR. 229-D*WITHOUT LID* Search GSE INC. TORQUE CALIBRATOR USED CONDITION*WITHOUT LID* MODEL: 229-D 115VAC ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR. PLEASE SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION. GUARANTEED NOT D.O.A. 18. KF SW 8 09/05/13 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping your order will be held and you will be contacted. We apologize ... morein advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the description. Please take the following into consideration. The color of the photo may vary from the actual product due to translation and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing, the information is only intended as a resource for additional information, not as an exact representation of the item. If a situation arises that the item you receive is damaged or D.O.A. please notify us within 14 days after the arrival of t
Torque Wrench Calibrator 500 Ft. Lb. or 6,000 In Lb., 3/4" In Drive
This is a nice looking piece of equipment with many years of service left!
ATLAS Copco ACTA 3000 Torque Analyzer/calibrator
Atlas Copco ACTA 3000
CDI Deployable Torque Calibration System 250 FTLBS Calibrator Tester Analyzer
CDI Deployable Torque Calibration System 250 FTLBS Calibrator Tester Analyzer. I have tested the load cells with another readout system. They react to torque and display information in the correct direction. I cannot test the Digital indicator as I do not have the necessary cable to connect load cells to the readout. The Digital indicator powers up and there are no burned out LEDs. TTS-250AFK– Deployable Torque Calibration System Case 1 Quantity 2500-2-02 Mechanical Loader– Low Torque 1 2000-300-7 20 LB Weight 2 2000-302-0 Weight Tray- 15 LB 1 2000-301 Weight Tray– ½ LB 1 2500-61-0 Reaction Slide Assembly 1 2500-154-0 Calibration Arm– 20” 1 Case 2 Quantity 2500-110 Computest-DT Digital Indicator 1 36831 250 FT. LB. Transducer Assembly 1 09/01/00 1000 IN. LB. Transducer Assembly 1 2500-400-0 Multiple Transducer 1 2500-500-0 Low Torque ... moreStation Fixture 1 2500-100-01 Torque Screwdriver Adapter 1 2500-100-30 Torque Watch Adapter 2” Hex 1 2500-100-31 Torque Watch Adapter 1 5/8” Hex 1 2000-151-0 Calibration Disk 5” 1 2500-56 Protective Shield 1 2500-50-0 Calibration Disk 2.5” 1 2000-300-4 2 LB Weight 2 Transducer Cable Not included 2500-100-29 Torque Watch Holder 1 2000-231 5 LB Weight 1 Operations Manual Plastic Case 1 Plastic Case 2 Case 2 Quantity 2500-250-17 Calibration Stand(base) Not included 2000-300-7 20 LB Weight 1 2000-300-5 5 LB Weight 5 2500-250-01 Calibration Stand(Top) Not included 2000-300-7 20 LB Weight 2 Please feel free to email with any questions that you may have. And I will do my best to try to help. Please give us a call at 860-242-4953 to discuss payment options. All duties and customs fees to paid by bidder. We do accept personal checks. Bank checks, company checks, and bank wire transfers. SHIPPING POLICY: We sell sensitive test and measurement equipment here on Ebay. We strive for 5-star service. So we invest a great deal of time and care to package all of our items safely for shipment. This attention to detail means it may take up to 10 days for us to prepare and ship your units out of
H10S HP-100 Digital Torque Meter Calibrator
H10S HP-100 Digital Torque Meter Model: HP-100 Includes: Carrying Case Accessories(as shown in pictures) Instruction Manual Domestic and International Shipping Available- Contact us for further information. Cosmetic condition- Used- Fully Functional. Tested. Calibration expired.
HIOS HP-100 Digital Torque Meter Calibrator in carrying case
HIOS HP-100 Digital Torque Meter Model: HP-100 Includes: Carrying Case Accessories(as shown in pictures) Instruction Manual Domestic and International Shipping Available- Contact us for further information. Cosmetic condition- Used- Fully Functional. Tested. Calibration expired.
ATLAS Copco ACTA 3000 Torque Analyzer/calibrator with two Transducers
This is for a ATLAS Copco ACTA 3000 Torque Analyzer/calibrator with two Transducers. Unit's battery should be replaced(not covered under guarantee) Unit come with two transducers(5nm and 25nm) Two transducer cables, usb adapter and main unit. Buyer has two weeks to verify/calibrate unit(if unit fails return shipping will be paid by seller) Please use pictures for verify condition. Shipping is included in the price(economy) signature will be required) Please feel free to ask questions on this item. Local inspection and pickup available. Powered by The free listing tool. List your items fast and easy and manage your active items.