|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New – Open box Location: Corona, United States The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping Condition: Used Location: Loma, United States This is a TROMPETER ELECTRONICS Model# TEI-14949 AD1W, Patch Panel BNC Monitoring Plug. I will let you know if that problem occurs. If item is breakable, ... morewe double box and use bubble wrap. We do not use foam peanuts as I do not trust them to do the job.
Buy It Now
Free Shipping Condition: Used Location: Loma, United States This is an ATM P417K-1 4 Port Splitter/Combiner. It has SMA ports and is rated at 13.7 - 14.5 Ghz. If item is breakable, we double box and use bubble ... morewrap. We do not use foam peanuts as I do not trust them to do the job.
Buy It Now
Free Shipping Condition: New Location: Corona, United States The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
$6.40 Shipping Condition: Used Location: Santa Monica, United States It sounds like a good place to work exact item shown Aertech mixer. the spectrum analyzer plots show behavior at several different resolutions and with ... moredifferent input frequencies.
Buy It Now
Condition: Used Location: Walled Lake, United States No exceptions.
Buy It Now
$14.14 Shipping Condition: New – Open box Location: Goleta, United States Manufacturer: Comprod. Frequency Range, MHz: VHF / UHF / 806-960. Bandwidth: 2.0:1 VSWR, MHz. There are 9 total units available but the price is for each ... moreunit. In excellent condition. Pattern: Omnidirectional.
Buy It Now
$5.19 Shipping Condition: New Location: New Hartford, United States The board can be assembled using all PTH parts, but the 8 pin DIP reference and the 8 pin DIP op-amp are duplicated on the solder side of the board with ... moreSO8 pads if you want to use the SMT versions. The board can use either a 5V or 10V reference IC or the reference from the OCXO if it has one.
Buy It Now
Free Shipping Condition: Used Location: Loma, United States This is a UNITED MICROWAVE Microflex 150 Model 57793 RF Test Cable. It has a SMA Male connectors on both ends. It has been inspected and refurbished. ... moreIt was working fine prior to removal. I will let you know if that problem occurs.
Buy It Now
$5.55 Shipping Condition: Used Location: New Hartford, United States Condition: This board uses an ISOTEMP 131-191 square wave output OCXO as the reference. An ADR02 5V reference IC and a 25 turn trim pot are used to adjust ... morethe frequency. The oven oscillator on the board stabilizes within 2 to 3 minutes after turn ON but should be on for at least an hour if adjusting the frequency.
Buy It Now
Free Shipping Condition: Used Location: Loma, United States This is a Set of 4 High Precision NFemale to SMA Male Coax Connector. It has been inspected and refurbished. It was working fine prior to removal. I will ... morelet you know if that problem occurs. If item is breakable, we double box and use bubble wrap.
Buy It Now
$13.00 Shipping Condition: New Location: San Antonio, United States 3M MODEL 722 WORK STATION MONITOR AND ACCESSORIES.
2d 23h 10m 17s 0 bids
$49.99 Now
$5.85 Shipping Condition: New Location: Conroe, United States The product is a new EST double action lift cover designed for single action stations MPSR-LP/MPSRLP. The lift cover is manufactured by EDWARDS, a brand ... moreknown for producing high-quality test equipment parts and accessories. The cover is designed for use in the test, measurement, and inspection industry.
Buy It Now
Free Shipping Condition: Used Location: Loma, United States It is a NARDA Model# 3456-2, 2 port Power Divider with exactly 3dB of loss on each output port. It has female N ports and is rated at 2 to 18Ghz. If item ... moreis breakable, we double box and use bubble wrap.
Buy It Now
Free Shipping Condition: Used Location: Loma, United States It has a WR75 CPRG Flange, a WR62 Cover Smooth Flange and a WR62 Split Flange. It has been inspected and refurbished. It was working fine prior to removal. ... moreI'm pretty easy to get along with. If item is breakable, we double box and use bubble wrap.
Buy It Now
Free Shipping Condition: New Location: 金东区, China 1 x MMDVM hot spot machine. Supports ：DMR, P-25, D-Star and System Fusion. test mode ：DMR. Basic Setup: 433.550000MHZ DMR. Supports all four digital amateur ... moremodes DMR,D-Star,P25 and System Fusion. Required for operation is a mini usb ( phone's cable)power source and a WiFi based internet connection.
Buy It Now
$5.95 Shipping Condition: Used Location: Loma, United States This is a Set of 2 N Female to N Female Coax Bulkhead Mounts. It has been inspected and refurbished. It was working fine prior to removal. I will let ... moreyou know if that problem occurs. If item is breakable, we double box and use bubble wrap.
Buy It Now
$11.70 Shipping Condition: Used Location: Finksburg, United States Maury Microwave 9556A Stub Tuner APC7. I am not actually sure it is a stub tuner but I think it is. I’ve had it for years and don’t remember where I got ... moreit from but I’m pretty sure I remember the place I bought it from said it was a tuner.
Buy It Now
$5.95 Shipping Condition: Used Location: Loma, United States There are basically four different kinds of Waveguide O-ring Gaskets: Full Round, Half Round, Full Square, and Half Square. This is a WR75 Ku-band(10.0 ... moreto 15.0 Ghz) Waveguide Full Round O-ring Gasket.
Buy It Now
Free Shipping Condition: New – Open box Location: Spartanburg, United States FOXBORO SPEC 200 MANUAL STATION 235SM. STYLE C, NIB LIST PRICE IS FOR ONE ITEM ALL ITEMS ARE DESCRIBED TO THE BEST OF MY ABILITIES. IF YOU HAVE A QUESTION ... moreABOUT A CERTAIN ITEM DO NOT HESITATE TO ASK AND I WILL ANSWER YOUR QUESTION ASAP! ALL USED MATERIALS WERE REMOVED IN GOOD WORKING CONDITION, WE USUALLY SHIP WITHIN 1 DAY AND OFFER 14 DAY RETURN POLICY SORRY DO NOT SHIP TO PO BOXES
Buy It Now
Free Shipping Condition: New – Open box Location: Delta, United States Rotary Lobe Blowers. Pressure Regulator Valves. Gate Valves. Knife Gate Valves. Electric Motors. Valve Bodies and Manifolds. Heating and Cooling. Cooling ... moreFans.
Buy It Now
$9.88 Shipping Condition: Used Location: Goleta, United States 3.25 (9950)M. For use with any standard pH or ORP Sensor. Model: Model 30/ 1055BT-01-10-22. 115/230 VAC.
Buy It Now
Free Shipping Condition: Used Location: Endicott, United States Part Number 7300-1000-498. (LL-B-Box 268).
Buy It Now
$5.95 Shipping Condition: Used Location: Loma, United States There are basically four different kinds of Waveguide O-ring Gaskets: Full Round, Half Round, Full Square, and Half Square. This is a WR159 F-band(4.90 ... moreto 7.05 Ghz) Waveguide Full Square O-ring Gasket.
Buy It Now
Free Shipping Condition: Used Location: Rancho Cordova, United States HP 8733B PIN MODULATOR 3.7-8.3 GHZ S/N 1206A01991 USA Seller Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Thank you for visiting ... moremister-surplus. We sell both new and used items. Most are surplus items previously used by private companies. Government institutions and agencies. Customer satisfaction is our#1 priority. Item Specifics: HP 8733B PIN MODULATOR 3.7-8.3 GHZ S/N 1206A01991 Comes As Pictured Being Sold AS IS Please see photos and policies for more detail Please see other items for other great deals. Payment Terms Payments must be received within 10 business days after our confirmation was sent to all winning bidder(s) Otherwise. The order is cancelled and a negative feedback will be given to the buyer as a result. All shipping costs are non-refundable for any circumstance. Buyer pays all freight costs for returning product(s) All returned items must be in the same condition as shipped in order to receive a refund. A 20% restocking fee applies to all returns. Buyers are responsible for all software or software related issues Shipping Terms Contact us for Overnight or 2-Day Shipping options. For priority shipping. Payment must be received before 3:00PM PST cutoff. Most orders ship on the same business day. Allow up to two days to receive tracking information via email. We will not ship an item until all payments and Paypal funds have been released. Paypal/ eCheck Payments could take 3-6 business days to clear. There are no shipping charges for Will Call pickup. Prepayment and 24 hour notice required for all will call pickups. All products Refurbished. They may contain non-OEM original components. Memory or drives. All trademarks and copyrights are property of their respective owner. No licensed software will be loaded or included. inkfrog terapeak. I000000.
Buy It Now
$5.95 Shipping Condition: Used Location: Loma, United States This is a Set of 4SMA Male to SMA Female Right Angle Coax Connector (SILVER) Adapter. It has been inspected and refurbished. It was working fine prior ... moreto removal. I will let you know if that problem occurs.
Buy It Now
$5.95 Shipping Condition: Used Location: Loma, United States It is a Semi-Rigid (Slightly Flexible) cable and is approx. It has a SMA Male (GOLD) connectors on both ends. It has been inspected and refurbished. It ... morewas working fine prior to removal. I will let you know if that problem occurs.
Buy It Now
$9.05 Shipping Condition: Used Location: Goleta, United States Type: Coxial RF Cable. See pictures for more detail. 4 Cables Included. LIMITED WARRANTY.
Buy It Now
Free Shipping Condition: Used Location: Loma, United States This is a WR229 E-band(3.30 to 4.90 Ghz) Waveguide Adapter. It has a WR229 CPRG Flange. I will let you know if that problem occurs. About myself: I am ... more64 years old and retired. It has been inspected and refurbished.
Buy It Now
$24.75 Shipping Condition: Used Location: Loma, United States This piece of Waveguide is aWR75 1.5 KW Finned Load. It has a WR75 CPRG Flange. It has been inspected and refurbished. It was working fine prior to removal. ... moreI'm pretty easy to get along with.
Buy It Now
Free Shipping Condition: Used Location: Loma, United States This is a HARBOUR INDUSTRIES (GREEN) Model LL142 RF Test Cable. It has a SMA Male connector on one end and a N Male connector on the other. It has been ... moreinspected and refurbished. It was working fine prior to removal.
Buy It Now
Free Shipping Condition: Used Location: Loma, United States It has a WR75 CPRG Flange on both ends. It has been inspected and refurbished. It was working fine prior to removal. I'm pretty easy to get along with. ... moreIf item is breakable, we double box and use bubble wrap.
Buy It Now
Free Shipping Condition: New Location: Delta, United States Butterfly Valves. Category:Other Level Sensors and Transmitters. Solenoid Valves. Solenoid Coils. Shock Absorbers. Safety and Security. Rotary Lobe Blowers. ... moreRoller Chains.
Buy It Now
$12.10 Shipping Condition: New Location: Boulder, United States Bracket Kit For Convex Mirrors. Includes: Base Plate, J-Bracket, Brass Extenders, Mirror Mounting Plate, Ball Pin, and Mounting Hardware. A liftgate will ... morelower the product to the ground for you. Under no circumstances can we take back an item that has been used.
Buy It Now
Free Shipping Condition: New – Open box Location: Wadsworth, United States Condition: Excellent. Location: A4 B2 PC.
Buy It Now
Free Shipping Condition: Used Location: Loma, United States It is a Sweep E-bend. It has a WR75 Square Choke Flange on the (A) side and WR75 Cover Smooth Flange on the (B) side. It has been inspected and refurbished. ... moreIt was working fine prior to removal. I'm pretty easy to get along with.
Buy It Now
$8.60 Shipping Condition: Used Location: Lafayette, United States QTY 6 ~ 087-109612-096.
Buy It Now
Free Shipping Condition: New Location: Jamaica, United States 9V battery clip double alligator clip. Output red clip for positive, black negative. Wide range of applications, suitable for players who like DIY. Length: ... more18cm. hope you could understand.
Buy It Now
Free Shipping Condition: Used Location: Loma, United States This is a Wiltron Model 34NFNF50 50 Ohm Adapter. It has been inspected and refurbished. It was working fine prior to removal. I'm pretty easy to get along ... morewith. I will let you know if that problem occurs.
Buy It Now
Free Shipping Condition: Used Location: Loma, United States It has a WR75 CPRG Flange on one end and a WR75 Cover Grooved Flange on the other. It has an "N" connector on the monitor port. It has been inspected ... moreand refurbished. It was working fine prior to removal.
Buy It Now
$35.00 Shipping Condition: New – Open box Location: Springfield, United States
Buy It Now
$19.90 Shipping Condition: New – Open box Location: Νεα Καλλικρατεια, Greece We try very hard to provide accurate product pictures and titles, in most cases, we take our own pictures unless they are provided to us by the manufacturer.
Buy It Now
$35.00 Shipping Condition: New – Open box Location: Springfield, United States
Buy It Now
$5.95 Shipping Condition: Used Location: Loma, United States It is a Semi-Rigid (Slightly Flexible) cable and is approx. It has SMA Male connectors on both ends. It has been inspected and refurbished. It was working ... morefine prior to removal. I will let you know if that problem occurs.
Buy It Now
Free Shipping Condition: New Location: Lexington, United States BACKHOE LOADER 1CX, 208. Application: For JCB BACKHOE. SWITCH RIGHT HANDLE LIGHTS AND WIPER FOR JCB 701/21202 701-21202 70121202. ROUGH TERRAIN FORK LIFT. ... morePart Type: Forward & Reverse Column Switch. Combination switch for parts 701/21202 For spare Parts.
Buy It Now
$17.50 Shipping Condition: New – Open box Location: Atchison, United States See photos. Includes 27 X what is shown in the picture. In the event that any clauses or phrases contained here within are ruled out by a judge, the law, ... morea lawyer, jurors, and or any other entity all others remain in effect.
Buy It Now
$19.90 Shipping Condition: New – Open box Location: Νεα Καλλικρατεια, Greece We try very hard to provide accurate product pictures and titles, in most cases, we take our own pictures unless they are provided to us by the manufacturer.
Buy It Now
Free Shipping Condition: New Location: West Berlin, United States EtherCAT Coupler. Beckhoff EK1100-0000. 24 VDC Input, 100 Mbit/s Data Transfer. 100 m Max Distance Between Stations, DIN Rail Mount.
Buy It Now
Free Shipping Condition: Used Location: Loma, United States It is a Cast E-bend. It has a WR75 Cover Smooth Flange on the (A) side and WR75 Cover Smooth Flange on the (B) side. It has been inspected and refurbished. ... moreIt was working fine prior to removal. I'm pretty easy to get along with.
Buy It Now
Free Shipping Condition: Used Location: Rancho Cordova, United States For sale is a HP/ Agilent J1996A VQT Phone Interface. Unit is in good working condition.
Buy It Now
Free Shipping Condition: New Location: 金东区, China Model: Shortwave Antenna Set 1, Antenna 1 (optional). Shortwave Antenna Set 1. Frequency range: 10 kHz - 30 MHz. using modern BF998 and BCX54 semi conductors.Real ... moreclass A circuitry, clean reception without IMD.
Buy It Now
$3.20 Shipping Condition: New Location: China Color: red/black. Security level: 1000V, 10A. Line length: 61.5cm Pen length: 10.5cm Total length: 72cm. Effective probe length: 1.4cm. hope you could ... moreunderstand.
Buy It Now
$5.45 Shipping Condition: New Location: Seattle, United States You will receive a set of three (3) NEW foam fan intake filters for Tektronix 400-series oscilloscopes such as the Tektronix 465B, 475, and others. The ... morefan filter is almost always missing from used oscilloscopes!
Buy It Now
$6.95 Shipping Condition: New Location: New Hartford, United States This is an upgrade from the standard discrete oscillator in the counter. That is the minimum space needed in order to get the board into the connector. ... moreThe board should also work anywhere that the 10811A is used, although it is not as stable as the double oven 10811A OCXO.
Buy It Now
$6.00 Shipping Condition: Used Location: Palm Bay, United States This is an transmit and receive module that was pulled out of a 802.16 wide-band transceiver. You hook up the TX out TTL and RX out +15V connectors to ... moreyour antenna that's outside. TX in and RX in I believe you hook up to your base station.
Buy It Now
$15.00 Shipping Condition: New Location: Laguna Hills, United States TESTED GOOD ON WORKBENCH.
Buy It Now
$5.95 Shipping Condition: Used Location: Loma, United States This is a Set of 11 of variousBNC Female to BNC Female Couplers (SILVER). It has been inspected and refurbished. It was working fine prior to removal. ... moreI will let you know if that problem occurs. If item is breakable, we double box and use bubble wrap.
Buy It Now
$38.49 Shipping Condition: Used Location: Belgium, United States This is a used Edstrom GP Flush Station Controller. Part# 7300-1000-498 Serial# 132986 HVO Line: 120VAC. 1 Amp, 60Hz GP Line: 120VAC. 3/4 Amp, 60Hz Item ... moreNo. 6256 Terms& Conditions: We would like to thank you for shopping with gibuys on eBay! Please read all of our terms& conditions before bidding/ buying to ensure the best possible experience! Please contact us with any questions between 9:00 AM– 5:00 PM Central Standard Time(CST) Monday through Friday at 1.877.gibuys1(1.877.442.8971) or by email anytime at with any questions. All products are advertised outside of eBay. We reserve the right to sell all products outside of eBay for any reason* Local Pickup: We are located in Belgium. WI. If you would like to schedule an appointment to inspect an item. Or to pick it up, please contact us directly. Please note that we must charge sales tax for a local pick up. Unless you are tax exempt. If you are tax exempt we require a copy of your tax exempt certificate before pick up. Please contact us for payment methods available to pay upon pickup. Shipping: After you have purchased an Item on eBay please wait until we send over an updated invoice through eBay which reflects the correct shipping charges before paying as this will ensure that you are not over charged for shipping. Shipping– Small Packages: All listings with free shipping will be shipped via UPS GROUND ONLY within the Continental United States, no exceptions. PO Boxes are not an acceptable address form unless you are paying for shipping via USPS. If you enter a PO Box as your address we will contact you for your physical address. Please be advised that a delay in response will delay your shipping time. If you would like a different method of shipping. Would like us to use a different carrier, or need rush shipping please contact us and we will do our very best to meet your needs. We do our very best to ship all items on the day the payment has cleared or the next business day. If there is a delay in shipping your item we will contact you. All item
Buy It Now
Free Shipping Condition: Used Location: Loma, United States This is a UNITED SATCOM RF Amplifier Model USK-503. I would greatly appreciate it. It has been inspected and refurbished. It was working fine prior to ... moreremoval. I will let you know if that problem occurs.
Buy It Now
Free Shipping Condition: Used Location: Loma, United States It has a WR75 CPRG Flange on both ends and a "N" connector on the monitor port. It has been inspected and refurbished. It was working fine prior to removal. ... moreI'm pretty easy to get along with. About myself: I am 64 years old and retired.
|
|
|
|
OKI METCAL MX-500P-11 2-Port SMT Soldering / Rework Station
You are bidding on a used METCAL MX-500P-11 2-Port SMT Soldering/ Rework Station. We purchased this to have available as a spare. It is now surplus to operations. It has been tested and is in good working condition. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
weller soldering station, Soldering Iron, Weller WMRS
I am selling my Weller Soldering Station. I attempted to learn electronic a few years ago and was unsuccessful. I do not have a need for this and I would like to sell it. This is a high quality tool that was designed for professional use to give years and years of trouble free service. If you would like to read more about this item. If can be found here: If you have any questions. Please contact me. Thank You!
|
|
|
Lot of 2 weller soldering station: WES51 (no power) and weller ec3000 good work
tested 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-1470e0a2bdd-0x108-
|
|
|
Hakko FM-202 Soldering Station plus 1 additional new tip
The Hakko FM-202 is a powerful soldering station that delivers the heat you want to the soldering area FAST! Process control allows you to select the soldering temperature you want. Without changing the tip. Replaceable ergonomic grip, and a lot, lot more. The iron has a unique cartridge and soft grip design that allows cartridges with different tips and removable ergonomic grips to be quickly and easily replaced Tip temperature can be changed without changing the tip Low tip temperature alarm with automatic shut off Digital display reads °C or °F Condition: Used but in great shape. Comes with the programming card and an additional tip(900S-T-1.2D) new in package. The soldering station you see in the pictures is the one you will receive. Only the accessories shown in the photos comes with the soldering station. I offer a 14 day ... morewarranty if the unit is found to be defective or not as described.
|
|
|
Hakko 936 Soldering Station, Excellent Condition, NO RESERVE PRICE!!!!
This listing is for a used Hakko 936 Soldering Station. It is in good and working condition(as shown in the picture) The temperatures all change accurately. MSRP is $120. Features: adjustable temperature control with lock/set screw• temperature range 392°-896°F(200°- 480°C) maintains idle temperature within 1.8°F(1°C) ceramic heating element and senor insures rapid heat-up temperature(30 seconds) and lightning-fast thermal recovery• Celsius or Fahrenheit temperature setting• temperature adjusted by simply turning the dial• slender iron handles are insulated and ergonomic-designed for ease and comfort• accommodates large. Medium or small irons• wide selection of tips available for soldering SMD and through-hole connections
|
|
|
Weller MT1500 Soldering Station w/ Tips and Solder Gun Stand (free solder roll)
This listing is for one Weller MT1500 Soldering Station. This item includes the station as well as two soldering tips and a soldering gun stand/holder. Includes a roll of soldering wire. This item is used and will shows signs of wear from use but is still a fully functional piece of equipment. If you have any questions please let us know! We would like to thank you for taking interest in our item. And we ask that you please review the entire listing, to be sure this item will work for your situation. Used/ Refurbished phones/Other wireless devices Sim cards and SD cards are not supplied accept when otherwise notated in the description When we supply batteries and chargers. We supply a compatible battery and charger for the model. We can only supply what is available in the market at any one time. So they may be new or used, and could be OEM ... moreor aftermarket. Please be aware that when buying a refurbished or used phone. There is always a risk of a defect. We do our best to test everything. However a small percentage of defects can slip through due to intermittent issues, and human error. Our current defect rate runs below 3% If for any reason you receive a defect. Just email us, and we will get it exchanged out or refunded. We state in our listings which carrier our product is meant for. If you are planning on unlocking our product or switching which carrier the phone belongs on please be sure the product will work on that carrier or with your plan before purchasing. Hours of operation We are open from 7:30 to 3:30 eastern time. Monday thru Friday Although you will be able to purchase items. We are not open to ship or answer emails on weekends or Holidays. We are currently working towards being open 7 days a week. However have not yet made the transition. Shipping We ship within one business day of your purchase. We do not ship on weekends or holidays. If you purchase an item on a Monday. It will ship Tuesday. If you purchase on Friday. Or the weekend, the item will ship on Monday. We ship with the United S
|
|
|
HAKKO FR-802 HOT AIR SOLDERING STATION W/ HANDPIECE & CONTROL KEY
HAKKO FR-802 HOT AIR SOLDERING STATION W/ HANDPIECE& CONTROL KEY Condition: Used condition. Fully Functional. Comes with B2972 Control Key& FR-802 handpiece tool& main unit. Package Specifcs: Packaged Weight: 14 lb. Packaging Charge: $0.00, Shipping: Shipping Information: Before purchasing the item. Please remember the following: This item is not available for International Bidding or Shipping. USPS will ship to PO Boxes and street address. UPS will only ship to street address. Please use the shipping calculator on this page for shipping charges to your zip code. You will be responsible for paying these shipping charges in addition to the sale price should you win. Handling charges are included in the shipping calculator. Delivery to a United States address should be expected in 7-10 days after funds have been received and cleared ... morethrough either our Pay Pal account(Pay Pal payment) or bank account(money order or check) We ship after we have verification of funds. Normally. UPS Ground delivery is 4 days after it is placed in their system, but, unfortunately, we cannot gurrantee the rate of speed of UPS. Please understand, we cannot be held responsible for delivery delays or damages caused by UPS. All items are shipped insured in the amount of the item's final sale price. Once your item is shipped. Tracking information will be uploaded to eBay. Click the logo below to track your shipment. Payment Options We accept the following forms of Payment: Pay Pal Credit Cards- Credit card or debit card processed through the seller's Internet merchant account. Export Control/ITAR Liability Please read carefully. By purchasing this item. You are doing so knowing and agreeing to the following conditions and agree to hold harmless Test Gear Nation Incorporated and all its agents should you improperly export this item. This item may be designated an Export Control Item. The use. Disposition, export and re-export of this item is subject to all applicable United States Laws and Regulations. This includes the
|
|
|
Weller Ungar 4624 Service Center Soldering/Desoldering Station
Weller Ungar 4624 Service Center Soldering/Desoldering Station In good working condition. Has a medium size tip installed. Good cosmetic condition. Guaranteed to be working perfectly. Packed professionally in Instapak 2 part foam for added shipping security! NO 3rd party shipping on buyer accounts California residents must pay 8.5% Sales Tax. Businesses purchasing for resale must provide CA state tax ID information. Payment is due within 7 days of auction's end. Buyer pays for shipping SEE BELOW. When possible. Multiple items will be shipped together to reduce shipping costs. Insurance for the amount of the auction is included in the shipping price. Flat fee shipping amounts apply to lower 48 states ONLY! OVERSEAS BUYER PLEASE CONTACT ME REGARDING ACCEPTED PAYMENT METHODS BEFORE MAKING A PAYMENT. If you need additional information or ... morehave any questions. Please contact me BEFORE placing your bid. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Listing created with from Black Magik Software.
|
|
|
WELLER WTCP STATION & DESOLDERING ATTACHMENT w/ TCP-1 IRON, EXTRA ELEMENT, TIPS
This works well. I did not use it that much because it was my back-up unit. The box in the first picture is for the desoldering attachment. One of the extra tips is more narrower for desoldering parts like IC's that have a tighter area between leads. The other spare tip is the same size as the one on the desoldering attachment. The part number of the desoldering attachment is 3439-00-460-7200. Before buying please watch the demo video& look at all of the pictures using the magnifier zoom feature for the best inspection. A tracking number will be sent to you when it is shipped and it will have Delivery Confirmation. USA BUYERS HAVE A CHOICE BETWEEN PARCEL SELECT OR PRIORITY MAIL DUE TO WEIGHT RESTRICTIONS INTERNATIONAL BUYERS WILL NEED TO HAVE IT SHIPPED PRIORITY MAIL
|
|
|
Radio Shack 20/40 Watt Dual Heat Soldering Station w/ Holder, Sponge & Tip #2184
Radio Shack 20/40 Watt Dual Heat Soldering Station w/ Holder. Sponge& Tip#2184 Solder& Sponge shows sign of use Item plugged in and heated up. No other tests were performed. Return merchandise from Radio Shack.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-147ac2724c3-0x117-
|
|
|
PACE Thermo drive desolder station with foot pedal internal pump
up for auction is this nice condition desolder station from PACE.all works good
|
|
|
Danotherm Hot Air Soldering Station R2200VA
Danotherm Hot Air Soldering Station R2200VA Very good condition.
|
|
|
RadioShack (64-053) Digital Soldering Station (No Soldering Iron)
CONDITION: Used- Missing Soldering Iron. Sponge, and guide. Please view all the photos as part of the description and for additional color. Print pattern& overall look. PRODUCT DESCRIPTION: Get it right the first time. This soldering station takes the guesswork out of the temperature equation. You simply enter a desired Fahrenheit or Celsius setting. As the iron heats up. The temperature reading on the LCD display increases so you can easily see when it's ready to use. There are even three presets that enable you to select frequently used temperatures with the push of a button. Makes it easy for you to select the exact temperature you need for your specific application Digital LCD display. Interchangeable between Fahrenheit and Celsius Display shows temperature setting and actual temperature Ideal for lead-free solder. Rosin-core, ... morelead-based, silver-bearing or any other 3 temperature presets for frequently used temperatures Detachable iron with pencil-style tip Includes cradle stand Temperature range from 302-842° Fahrenheit(150-450° Celsius) Pricing and availability: Please note that all prices are subject to change without prior notice. Prices advertised on this site are for online orders only. Prices on some items may differ from those advertised in RadioShack stores. All merchandise may not be available at all stores. And all stores may not participate in all sales promotions. We recommend you contact the store to confirm product availability and price. Disclaimer: California residents: WARNING: This product contains. Or when used for soldering and similar applications produces, chemicals known to the State of California to cause cancer and birth defects(or other reproductive harm) Normal 0 false false false EN-US X-NONE X-NONE"AS-IS" This item is being sold in as-is condition. We are unable to guarantee this item's working ability or if this item has a defect of some kind. Some parts or accessories may be missing that effect it's functionality. In addition. This item has c
|
|
|
RadioShack (64-053) Digital Soldering Station (Soldering Iron Not Included)
CONDITION: Used- Missing Soldering Iron Please view all the photos as part of the description and for additional color. Print pattern& overall look. PRODUCT DESCRIPTION: Get it right the first time. This soldering station takes the guesswork out of the temperature equation. You simply enter a desired Fahrenheit or Celsius setting. As the iron heats up. The temperature reading on the LCD display increases so you can easily see when it's ready to use. There are even three presets that enable you to select frequently used temperatures with the push of a button. Makes it easy for you to select the exact temperature you need for your specific application Digital LCD display. Interchangeable between Fahrenheit and Celsius Display shows temperature setting and actual temperature Ideal for lead-free solder. Rosin-core, lead-based, silver-bearing ... moreor any other 3 temperature presets for frequently used temperatures Detachable iron with pencil-style tip Includes cradle stand Temperature range from 302-842° Fahrenheit(150-450° Celsius) Pricing and availability: Please note that all prices are subject to change without prior notice. Prices advertised on this site are for online orders only. Prices on some items may differ from those advertised in RadioShack stores. All merchandise may not be available at all stores. And all stores may not participate in all sales promotions. We recommend you contact the store to confirm product availability and price. Disclaimer: California residents: WARNING: This product contains. Or when used for soldering and similar applications produces, chemicals known to the State of California to cause cancer and birth defects(or other reproductive harm) Normal 0 false false false EN-US X-NONE X-NONE"AS-IS" This item is being sold in as-is condition. We are unable to guarantee this item's working ability or if this item has a defect of some kind. Some parts or accessories may be missing that effect it's functionality. In addition. This item has cosmetic or general c
|
|
|
HAKKO FM-202 ESD SOLDERING STATION POWER UNIT ONLY - Used LOT 1
███████╗ ██████╗ ██████╗ ███████╗ █████╗ ██╗ ███████╗██╗ ██╔════╝██╔═══██╗██╔══██╗ ██╔════╝██╔══██╗██║ ██╔════╝██║ █████╗ ██║ ██║██████╔╝ ███████╗███████║██║ █████╗ ██║ ██╔══╝ ██║ ██║██╔══██╗ ╚════██║██╔══██║██║ ██╔══╝ ╚═╝ ██║ ╚██████╔╝██║ ██║ ███████║██║ ██║██████████████╗██╗ ╚═╝ ╚═════╝ ╚═╝ ╚═╝ ╚══════╝╚═╝ ╚═╝╚══════╝╚══════╝╚═╝ One HAKKO FM-220 Control Unit. It has been used and has signs of wear, But completely Functional. They are great soldering stations, I have 2 on my workbench and use them daily. I didn't get keys with all the ones I have had and lost the keys for the ones i do use, so I grabbed a sheet of kydex and cut some that work, and they actually work well. This is for the control unit pictured and I will tape one of my cut kydex keys to it, I did throw one of my irons on it and made sure it all functioned but I am selling ... moreas is. If you have any questions feel free to msg me via ebay. O º °‘ ¨( Terms and other Fine Print) ¨‘ ° º O As Is Sale, No Returns or Refunds It will be as described. Period, I strive to tell every detail. ░░▄▄░▄███▄ ▄▀▀▀▀░▄▄▄░▀▀▀▀▄ The Item Pictured is █▒▒▒▒█░░░█▒▒▒▒█ the item you will receive, █▒▒▒▒▀▄▄▄▀▒▒▒▒█ I do not use stock photos ever. ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▀. ̲̅ $̲̅(̲̅ιο ο̲̅)̲̅$̲̅] PayPal Only Please! ̲̅$̲̅(̲̅ιοο̲̅)̲̅$̲̅] Alaska and Hawaii might cost extra for shiping. Please pay within 3 days of auction end. I Will NOT Ship ──────▄▌▐▀▀▀▀▀▀▀▀▀▀▀▀▌ Outside the USA. ───▄▄██▌█░░░░░░░░░░░░▐ ▄▄▄▌▐██▌█░░░░░░░░░░░░▐ I will ship within the ███████▌█▄▄▄▄▄▄▄▄▄▄▄▄▌ 48 hours after payment ▀❍▀▀▀▀▀▀▀❍❍▀▀▀▀▀▀❍❍▀ clears. I f I sell it" AS IS" or" Non-Working" for parts and it works when you receive it. Send me the Working item back and I will promptly refund your money. `) |_ || |( | |( | | |' ` ||' |/ V/ | || | |_| |_||_|\||_||_| |_ |_|\ |_
|
|
|
Weller ELECTRIC CONTROL SOLDERING STATION EC3000
WELLER SOLDERING STATION EC3000. WORKS WELL! 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-147c333445a-0x118-
|
|
|
Hakko 850 Portable SMD Rework Station Hot Air Blower Unit Desoldering 850M-V12
Search our eBay Store! Hakko 850 Portable SMD Rework Station Hot Air Blower Unit Desoldering 850M-V12 SKU: JV-MAT-A-HAKKOSMD850 Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Hakko 850 Portable SMD Rework Station Hot Air Blower Unit Desoldering 850M-V12 Model: 850 P/N: 850M-V12· Unit powers on with indicator lights. Hot air can be felt blowing out of the unit. Dimensions(L”xW”xH” 10.25*9.75*6.5 As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10. With 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. All images ... moretaken in house of the unit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. D0 N0T bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which
|
|
|
Weller EC4000 Electronic Control Soldering Station with EC 1301 Pencil
Weller Model EC4000 Electronic Soldering Station with EC1301 Pencil and Operating Instructions This unit offers the ultimate in controlled temperature hand soldering. Tip temperature is electronically controlled throughout the temperature range of 350 degrees to 850 degrees. The units are calibrated to within +/ 10 degrees. Temperature setting and tip temperature are displayed on a three digit LED readout. The EC4000 is divided into two units- the power unit and the soldering tool. The power unit houses the transformer. On-off switch, calibrated temperature adjustment knob, extra tip receptacle, soldering tool holder and tip wiping sponge. It also features a set/read switch and digital display. The solderng tool contains the soldering tip, stainless steel heating element, platinum sensor, thermoplastic handle, non-burning silicone rubber ... morecord and locking male plug that mates with the receptacle on the power unit.
|
|
|
Hakko FX 951 Solder Station all accessories included FX951-66
Soldering Station complete 115V all pictured items included + one tip ready to solder. Comes in OEM box as if just bought in store.
|
|
|
PACE MBT-200 solder station with 1 working solder iron
It is a used item. The solder iron is tested with the unit and working condition. Th others such as Extractor& Vacuum are not tested because no way to test. The tools are not available so I'd like to sell it AS IS however there is 100% refund if the solder iron is not working. 1 x MBT-200. 1 x solder iron. 1 x 110V AC cord. Manufacturer: PACE. Model: MBT-200. P/N: 7008-0154.
|
|
|
HAKKO 850D ESD SAFE SMD HOT-AIR SOLDER REWORK STATION 450°C 842°F DESOLDER
770) 253-6114, Search our eBay Store: Auction Terms | eBay Store | Contact Us We will be closed on: Dec 25. 2006, Dec 26. 2006, Jan 1. 2007, Jan 2. 2007, On these dates we will not be answering emails or phone calls and we will not be shipping items. COMMENTED OUT- Click here to estimate shipping All international buyers must contact us for a shipping quote before bidding. See for details. Mailed Payments, Bank Wire Transfer, Visa& MasterCard, Buyer must call(770) 253-6114 before purchasing item to pay by Visa or MasterCard. If the buyer does not call. Payment by Visa or MasterCard will not be accepted. All international buyers. Including Canada and Mexico, must pay by Bank Wire Transfer. We do NOT accept escrow or ship COD. See for details. HAKKO 850D ESD SAFE SMD HOT-AIR SOLDER REWORK STATION 450°C 842°F DESOLDER This auction ... moreis for one Hakko 850D. This unit is in excellent physical condition and will arrive in the condition shown. It comes with a 14 Day Guarantee against being DOA from receipt. You are bidding on only what is listed in the description and what is in the pictures. If it is not listed in the description and you don't see it in the pictures, then it is not included. Power cords and power adapters are never included unless specifically mentioned. You must agree to our terms to purchase. ATTENTION: WE HAVE BEEN IN BUSINESS SINCE 1978. FEEL FREE TO CALL US FOR ADDITIONAL INFORMATION. GOOD LUCK BIDDING. By bidding on this auction you are agreeing to these terms. These terms are not negotiable. NO order will be shipped until full payment is made INCLUDING SHIPPING. Shipping listed is for the continental United States only. We carefully package and fully insure every shipment to protect both the seller and buyer. Please allow a minimum of 3 days for shipping after transaction is complete. If we use your shipping account we will charge an additional handling fee for the packing of the item. We will only ship to locations in the United States using our shipping account. If you purcha
|
|
|
Pace HeatWise Soldering ReWork Station MTS 300 B Desoldering
Pace HeatWise Soldering rework station desoldering. MTS 300 B. PN: 7008-0275-01. Comes with desoldering gun. no power cable(standard computer power cable less than 6$ at any retailer) Item was in perfect working order when pulled from manufacturing floor. No damage at all.
|
|
|
Weller WTCPT PU120 Soldering Iron Station with Pencil
In great working order
|
|
|
Hakko FM-202, 120 V, 140 W, 60 Hz, 200 to 450°C Soldering Station. TESTED
USED IN GOOD WORKING CONDITION HAKKO FM-202 SOLDERING STATION MADE IN JAPAN NO ACCESSORIES CAME WITH THIS PURCHASE The Solder Iron shows in the first picture IS NOT CAME WITH THIS PURCHASE You Will Receive Only The The FM-202 Soldering Station& The Power Cord(Not show in the pictures) w/This Purchase Shipping fees only cover within 48 States It is USED So Please Feel Free To Ask Any Questions You Might Have Before Making The Purchase This Item 14 Days Money Back IF You Are Not Happy With This Purchase
|
|
|
Weller EC-1002 Temperature Controlled Soldering Station
Good working Weller EC-1002 Soldering station less the soldering iron stand.Works fine. Tip is used.
|
|
|
Metcal Soldering Station Model PS2E-01 w/ Wand and 5 Tips
Metcal Soldering Station Model PS2E-01 w/ Wand and 5 Tips* FREE SHIPPING* We Only Ship In The U.S. If You Have Any Questions Please Call Our Office Monday- Friday 8 AM to 5 PM Central Time(956) 702-3434 Location: New Shelves#13.
|
|
|
Weller WLC100 40-Watt Electronic Soldering Station
Condition: This item is used but remains in excellent condition not far off from a new item and does not have any visible or functional defects beyond slight normal wear. Original packaging might or might not be included. What's In the Box: Soldering iron. ST3 tip, and base unit with built-in iron stand. Description: On/off switch with power-on indicator light Variable power control produces 5 to 40 watts Quality. Lightweight pencil iron Cushioned foam grip with replaceable heating element Includes iron-plated copper tip. Safety guard iron holder, and natural sponge tip cleaning pad We use Canada Post as our preferred courier. If for some reason you would like to use another courier please contact us with details. Items will be shipped within 24 Business Hours after confirmed payment. Please verify your address during checkout. We are ... morenot responsible for any wrong or undeliverable addresses. Shipment errors due to a wrong address entered by the buyer will not be credited for shipping charges or at all if the shipment is lost. Tracking information will be uploaded directly to eBay for shipments that include tracking. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's Customs about any import tax/duties/customs fee/carrier fee/etc. before making your purchase. Free Local Pick-Up is available We do not ship on weekends or public holidays We accept Paypal only. To pay with PayPal simply complete the eBay checkout process. Paypal allows you to pay with a credit card. Bank account, and many other options. Setting up a PayPal account is easy at. Inventory is not reserved until the item has been paid for. Please provide a phone number for international shipments as it is required for Customs. Applicable sales tax will be charged on any orders shipped within Canada. NorthernLiquidators will accept returns for products purchased from us within 14 days from when the buyer receives the item for a r
|
|
|
Weller WTCPT Temerpature Controlled Soldering Station SD Safe
You are bidding on a lightly used Weller WTCPT Temperature Controlled Soldering Station. Stand, Sponge in excellent working and cosmetic condition. Comes with the stock 700 Degree tip which is very lightly used. This soldering station was kept in a clean, dry, smoke-free small electronic shop in it's original packaging.
|
|
|
Weller WTCPT Soldering Iron Station with Pencil @ Pencil Stand
Weller soldering iron with pencil and pencil stand. Works great- have two and only need one. Please check my other items for more Irons and other great stuff.
|
|
|
WELLER UNGAR 4024 SERVICE CENTER SOLDERING STATION
This auction is for a USED WELLER UNGAR 4024 SERVICE CENTER SOLDERING STATION We accept returns within 7 days. Buyer pays for return shipping. Buy with confidence REFUNDS: Refunds will be issued after the item is received and passes inspection. Item has to be in the same condition it was sent. Without any modification or alteration. Shipping and Handling fees are not refundable dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1489071fe77-0x10d-
|
|
|
WELLER - UNGAR 4024 Solder / De-Solder Station - TESTED
Up for Sale: Ungar 4024 Solder/De-Solder Station with adjustable Temp and Solder/Desolder switch for air pump. All tested and fuctional. This unit is in near NEW condtion with little sign of wear. email with questions.
|
|
|
RadioShack Soldering Work Station with Dual-Powered Iron w/ Solder + De-Solder
RadioShack Soldering Work Station with Dual-Powered Iron w/ Solder + De-Solder Used Soldering gun 100% working and tested. Includes Radioshack brand standard solder and a barely used de-soldering braid. Missing the small sponge that goes in the base, but a standard house sponge can be cut to fit. Has low and high settings that both work(20 watts and 40 watts) Ready to ship! PAYPAL only and the item will be shipped U.S. Mail. Every effort is made to describe items accurately REFUNDS There are no warranties which extend beyond the description on the face hereof. There are no warranties expressed or implied. The buyer further agrees that their sole remedy against the seller shall be to request a refund of the amounts paid for items sold. Not including shipping. Refunds will be given if item has been grossly misrepresented. This should be conveyed ... moreto me when item is received.
|
|
|
! American Beauty Soldering Iron Tweezer Handpiece for Soldering Station /105A12
RDR ELECTRONICS WILL ONLY SHIP TO U.S. ADDRESSES. FOREIGN BIDDERS WILL BE APPROVED TO BID ONLY AFTER PROVIDING A U.S. SHIPPING ADDRESS! Auction consisting of: 1- American Beauty Soldering Iron Tweezer Handpiece for Soldering Station This auction is for a used American Beauty Soldering Iron Tweezer Handpiece. It is in pretty good shape with some signs of use, but definitely has not been abused. The auction photo's are of the actual unit you will receive! These Tweezer's retail for around $150.00. We have a great starting bid and we are including a 30-day warranty on this sale! Only what is listed above and/or shown in the pictures below are included in this auction. Item weighs about 1/2 pounds. For more detailed information we have provided this link to the website. Used condition. This item is being sold with a 30-day warranty. Check ... morethe shipping calculator for S/H cost to your ZIP code. Item will be insured for the bid amount. To view all of our current E-bay auctions click on our RDR-Electronics Items for Sale Page link below! Click on any image for a more detailed view. Click on any image for a more detailed view. Terms and Conditions: There is no need for us to email you after the auction ends. Simply pay the amount of the winning bid plus the S/H indicated by the shipping calculator for your ZIP code. We do not try to make(or lose) money on our S/H cost. We try to offer quality shipping at a fair price. We use new boxes. Peanuts, and bubble wrap and try to pack our items well(check our feedback) We pack items immediately after auction closing. If you are bidding on multiple items please contact us and we will be happy to combine items if possible to lower cost. If you desire combined shipping, contact us before payment and we will send you a revised eBay invoice. This item will be insured for the winning bid amount. Shipping is limited to addresses within the United States(U.S. ONLY. We ship via unless other arrangements are made. Small items may be shipped via USPS. Please contact us abo
|
|
|
RADIO SHACK RadioShack 80W Digital Soldering Station Excellent+ NO RESERVE
This NO RESERVE auction is for a RadioShack 80W Digital Soldering Station in Excellent Condition. Catalog number is 64-2185. The soldering iron temperature is set using the digital display. I set the temperature at various settings and it stopped advancing when it reached the set temperature. Unfortunately. I have no way of checking the actual temperature at the tip of the soldering iron but it did melt the rosin-core solder I was testing it with. Package will weigh 6-pounds for shipping. Please note: The photos. With this listing, are part of the description for this item. Photos are of the actual item and have not been touched up to cover any flaws. Please ask any questions before bidding and ask early. I cannot answer any questions during the last 2-hours of the auction. See my other auctions for more photo items. Thanks for looking and ... morehave fun bidding! Paypal only. No E-checks. Make sure your PayPal address is current. We will only ship to your PayPal address. No exceptions because of the PayPal fraud policy requirements. We do our best to describe each item accurately. If it is not stated in the description. Or shown in the photos, then it's not included. Shipping and handling fees. Which include insurance, are for the United States only. Shipping and handling fee can be combined, upon request, for items purchased at the same time. We package photographic equipment securely with bubble wrap and peanuts- not newspaper. California buyers add 8% for Sales Tax if item is shipped to a California address. International bidders– Please read all of this! g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-148d8a38138-0x113-
|
|
|
LOT 21 HAKKO FUTURE MODULE PRODUCT SOLDER SOLDERING STATION FM-202 FP-101 936
TESTING& COSMETIC NOTES: This is a USED WORKING item in FAIR cosmetic condition that WAS PULLED FROM A WORKING ENVIRONMENT and is GUARANTEED WORKING All units power on and heat up the iron tips to its desired temperature. Which then produced a clean cut. There are two soldering stations that shows a t-E error on the FM-202s, but we believe it's because the tip that goes with the stations may have been burnt out. We are including tips, but we cannot guarantee the life remaining of them. COMPONENTS INCLUDED IN THIS AUCTION: 6) HAKKO FUTURE MODULE FM-202 200-450*C SOLDERING STATION E212152• 4) HAKKO FUTURE PRODUCT FP-101 650-800*F SOLDERING STATION E212152• 1) HAKKO FUTURE PRODUCT FP-102 650-800*F SOLDERING STATION E212152• 10) HAKKO SOLDERING STATION 936 200-480*C• 2) HAKKO FUTURE MODULE FM-2021 24V/70W SOLDERING IRON TIP HOLDER(W/TIP) ... more9) SOLDERING TIP STAND• 4) BLACK TIP CYLINDER STORAGE HOLDER• 6) HAKKO 907 24V/59W SOLDERING IRON TIP• 1) HAKKO BLUE SLEEVE ASSEMBLY B3218• 15) INTEGRATED POWER CORD• 6) POWER CORD REPLACEMENT or MONEY BACK GUARANTEE: When you receive a Guaranteed item from OC Depot. It should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 14 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee. Please Click Here and Read Our Sales Policies WE SUGGEST FREIGHTING THIS ITEM: Although this item can be shipped via UPS. Due to the size and/or delicate nature of this item we highly suggest freighting this item on a pallet to ensure safe delivery. This is the safest way to transport your item. If you would like to consider freighting this item, please click our freight calculator link to obtain your quote. For customers who choose to arrange their own freight shipping, we charge a minimum $35 palletizing fee Due to the size or weight of this item. We suggest shipping via freight. Dimensions: xx28 inches-
|
|
|
Hakko 936 Soldering Station & 907 Iron inventory 504
Hakko 936 Soldering Station Compact unit; takes up little space on the workbench. Soldering irons have thinner grips for easier use. Lock screw prevents inadvertent changes to the temperature setting. ESD safe by design Model Name 936, Power Consumption 60W, Station Output Voltage 24V AC, Temperature 200°C- 480°C(392°F- 896°F) Temperature Stability ±1.0°C(1.8°F) Outer Dimensions(w/o cord) 120(W) x 93(H) x 170(D) mm 4.7(W) x 3.7(H) x 6.7(D) in. Weight(w/o cord) Approx. 1.3 kg(2.9 lbs) Model Name 907, Type Medium, Style Regular, Power Consumption AC; 24V/50W, Standard Tip 900M-T-1.6D, Tip to Ground Resistance Under 2 ohms, Tip to Ground Potential Under 2 mV(Typ. 0.6 mV) Heating Element Ceramic heater, Total Length(w/o cord) 190 mm(7.5 in. Weight(w/o cord) 44 g(0.09lbs) Fully operational. Includes iron and ... morepictued stand, email me if you would like a manual emailed to you in PDF format. RETURNS& WARRANTY: This item comes with a fourteen(14) calendar day. Full return privilege after delivery. An instrument can be returned for any reason within the 14-Day Right-of-Return period for a refund, excluding shipping costs. A purchased item may only be returned with an RMA(Return Material Authorization) number. To obtain an RMA number, simply contact us either by phone, by FAX or by e-mail with details of the return. One of your best warranties is knowing whom you're doing business with. Please click on the"ME" icon for more information. TECHNICAL SUPPORT: For any questions feel free to email and we will do our best to respond however. No technical support will be provided by the seller. All statements regarding products and their configuration are made to the best of our ability, and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. Unless specifically stated, power cords, software, manuals, etc. are NOT included. International Bidders welcome! Internationales Bewerber Willkommen! Bienvenue aux acheteurs internationale
|
|
|
Hakko 926 Solder Station with 903 Iron
Used Hakko 926 Solder Station with 900M ESD Iron(comes with 1 tip) Operates and functions great. Cosmetically challenged. With minor scratches on the front panel and case. See picture, includes PDF manual, fully operational Specifications Model No. 926 Power Consumption 60W Station Output Voltage AC 24V Temperature Range 200°C- 480°C/ 392 ~ 896 °F Outer Dimensions(w/o Cord) 125(W) x 120(H) x 200(D) mm( 4.9" X 4.7" X 8.1" Weight(w/o Cord) Approx. 1.5kg(3.3 lbs) Without cord& Holder Part Iron Model No 903 RETURNS& WARRANTY: This item comes with a fourteen(14) calendar day. Full return privilege after delivery. An instrument can be returned for any reason within the 14-Day Right-of-Return period for a refund, excluding shipping costs. A purchased item may only be returned with an RMA(Return Material Authorization) ... morenumber. To obtain an RMA number, simply contact us either by phone, by FAX or by e-mail with details of the return. One of your best warranties is knowing whom you're doing business with. Please click on the"ME" icon for more information. TECHNICAL SUPPORT: For any questions feel free to email and we will do our best to respond however. No technical support will be provided by the seller. All statements regarding products and their configuration are made to the best of our ability, and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. Unless specifically stated, power cords, software, manuals, etc. are NOT included. International Bidders welcome! Internationales Bewerber Willkommen! Bienvenue aux acheteurs internationale! Internationaal biedersonthaal Ofertantes internacionales bienvenida Internasjonale bidders velkomme SHIPPING& HANDLING: Buyer is responsible for all shipping costs. All items are professionally packed to arrive undamaged. UPS is our standard shipping carrier worldwide. On international orders we try to ship via the mail. But please be aware that there are size restrictions that m
|
|
|
Weller WTCPT Soldering Iron Station * EXCELLENT CONDITION *
Puget Sound Pawn Depot We Take Great Care In Providing Detailed Descriptions Of Our Items. The Descriptions Provided For Each Individual Item Are Clear And Precise. If Something Is Not Described In A Listing Please Do Not Assume Inclusion Of Anything Outside Of The Description. The Assumption Of Inclusion Of Anything Outside Of Our Description Is Not Our Responsibility. If You Have Any Questions Regarding Details Of An Item Please Ask Us Prior To Making Your Purchase. Weller WTCPT Soldering Iron Excellent Shape Works great! Puget Sound Pawn Depot We are a small family owned pawn shop. Hours of Operation 7 Days A Week 10am- 7pm pst Shipping We ship all items within 2 business days of purchase. Shipping is via usps priority with tracking and delivery confirmation. Returns We take great care in describing our items clearly and accurately. We ... moredo not accept returns unless the item has been grossly misrepresented. Customer satisfaction is our top priority.
|
|
|
Weller WX2, WXP120, WXMP WDH10 WDH51 Soldering Station
Weller WX2 Dual channel high power supply. WXP120 handpiece with WDH10 Stand, WXMP micro handpiece with WDH51 stand, manuals, CD. Like new with the exception that the magnet from the WDH51 stand has been lost. Overview of New and Improved Features: Graphic LC display. Text and graphic elements can also be displayed Viewed from all angles Easy to read thanks to blue LED background lighting Versatile connectivity options. Two connections which can be used for managing fume extraction units Heating plates and programmable logic controller(PLC) Standard digital and decoupled robot connection temperature. Speed and status message are shown in the WX display. WX tool connection. Unequivocal tool recognition Digital data transfer Resistant to malfunctions Locking ring Separate pins for 12 V and 24 V Multi-purpose USB port. Quick and localised firmware ... moreupdates Parameter configuration and logging capabilities via USB stick. Intelligent tools. Analogue to digital converter and data memory read in bit handle Thanks to a calibrated bit, calibration of the soldering station used is not required. Optimised, spring-loaded tip barrel with WXP 120. Steady contact pressure thanks to a spring system Antistatic soft grip Tips can be changed without the use of tools Energy-saving sleep mode. Automatic standby mode thanks to a sensor in the handle which detects when the device is in use No special stop-and-go rest required WXP 120 with blue ring light(light is out = Off, light is blinking = Standby or Heating Up, light is on = tip ready for use) All connected accessories such as fume extractors and heating plates also go into sleep mode 240 W mains supply voltage. Very high capacity Quick heating-up time Use of 200 W tools Simultaneous use of two 120 W tools Robust touchscreen. Patented Capacitive touchscreen made of real glass Antistatic touchscreen Chemical resistant and temperature resistant Intuitive use. Turn-and-click wheel with enter key and finger guide Six touch keys Multiple language menu navigation. German English Fren
|
|
|
Metcal MX-RM3E Soldering Station Handle with STTC-117 Tip
Up for auction is a Metcal MX-RM3E Soldering Station Handle and STTC-117 Tip. There is a melt spot on the handle shown in the photo. Other than that the handle is good.
|
|
|
Hakko SMD REWORK Station 850B ESD Safe Hot Air Soldering System
You are bidding on a Hakko SMDREWORK Station 850B ESD Safe Hot Air Soldering Station. Comes as pictured motor is in great shape but the cover is missing a couple of screws on the side. Unit stays on even when off, hot air does come out but the blower is very light and not sure if all that is normal, because of that this will be sold as is no returns. Shipping $ 18.00 Rules and Condition of Sale: PLEASE READ! Please note almost all items for sale were purchased used in our store. We try to describe them to the best of our knowledge.Mostly all items are used unless described as new. All items described as sold as is we be clearly stated in our auction and their will be no returns on these items labeled AS IS.Return shipping will be paid by the buyer. We accept the following forms of Payment- Paypal. Foreign bidders need to request permission ... morebefore bidding. For AK. HI, PR, APO Boxes and other non-continental US residents– Shipping will be MORE than quoted in the auction so please email before sending payment if you win our auction.Pickups are welcome, fee will be charged. IF CASH IS USED ON ITEMS THAT ARE PICKED UP IN PERSON, there will be NO 3% fee for pickups. Ca sales tax 8.00% Serious bidders only. Thank you for being interested in our items. Good Luck.
|
|
|
Chip Removal 110V Digital Soldering Rework Station
You are bidding on this Chip Removal Soldering Station or for chip removal. Heats multi-pins at once Model BT-1011 Made in USA Multi-Purpose 110V 150W Max Used equipment ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-149af8aa9ab-0x115-
|
|
|
Edsyn 951SX Temperature Controlled Soldering Station W/Iron 400-800 Deg F TESTED
Here is a Edsyn 951SX Temperature Controlled Soldering Station. This station has NO TIP. It has been tested. Heats up fast and is guaranteed to be in fine working order other than needing a tip for the iron and good cosmetic condition with signs of use, as shown in the photos. Only the Edsyn 951SX Temperature Controlled Soldering Station is included in this auction. No sponge. Tip, other devices or accessories. Features: Accurate linear temperature control for consistent soldering Easy to maintain and calibrate Modular assembly of parts for ease-of-service Wide variety of soldering and SMT Crown tips available Includes: Soldering station and iron shown. Specifications: Power requirements: 120V. 60Hz. Power rating: 15W- 220W Heater rating: 120V. 95W Temperature range: 400-800°F(205°-427°C) Temperature regulation: ±6°F(±3°C) ... moreTip-to-ground voltage leakage/Resistance: Dimensions: 4.1"W x 8.2"H x 10"D(104mm W x 208mm H x 254mm D) See our ebay store for more great deals. Many loads. Attenuators, cables, manuals and other equipment available. Click here to Be sure to sign up for our Ebay Newsletter under the'Email Subscriptions' heading for special ebay-only offers. Questions/ Contact We are available 8.30 am to 5.00 pm Eastern Time and respond quickly to all email questions. Shipping or Payment questions? email Technical questions? email Can't wait for an email? Call us at 410 871 2273 You can fax payment information to us at 410 871 1255 Our Mailing Address: Ridge Equipment Company. Inc 2002 Bethel Road Suite 105 Finksburg. MD 21048 Payment We accept American Express/ Visa/ Master Card/ Discover Directly. Or. Pay me securely with any major credit card through PayPal! Shipping 95% of our packages ship within 1 day! Shipping is calculated based on buyer's location using eBay's built in shipping calculator. We will combine shipping for multiple items. The calculated price includes a packaging charge to help cover the cost of foam-in-place packaging. We
|
|
|
Cooper Weller EC1301 Soldering Iron/Pen For EC3001, EC4001 Series Station No Tip
Here is a Cooper Weller EC1301 Soldering Iron/Pen. Without a tip or the correct power supply/station. We cannot test it, so it will be offered AS-IS, untested. No returns. Cosmetic condition is fair. With signs of use, as shown in the photos. Only the Cooper Weller EC1301 Soldering Iron/Pen is included in this auction. No station. Other devices or accessories. See our ebay store for more great deals. Many loads. Attenuators, cables, manuals and other equipment available. Click here to Be sure to sign up for our Ebay Newsletter under the'Email Subscriptions' heading for special ebay-only offers. Questions/ Contact We are available 8.30 am to 5.00 pm Eastern Time and respond quickly to all email questions. Shipping or Payment questions? email Technical questions? email Can't wait for an email? Call us at 410 871 2273 You can fax ... morepayment information to us at 410 871 1255 Our Mailing Address: Ridge Equipment Company. Inc 2002 Bethel Road Suite 105 Finksburg. MD 21048 Payment We accept American Express/ Visa/ Master Card/ Discover Directly. Or. Pay me securely with any major credit card through PayPal! Shipping 95% of our packages ship within 1 day! Shipping is calculated based on buyer's location using eBay's built in shipping calculator. We will combine shipping for multiple items. The calculated price includes a packaging charge to help cover the cost of foam-in-place packaging. We use this system for maximum protection when shipping electronic equipment. These images copyright Sealed Air Corporation Overseas Bidders: Click here for our Be aware that many of our packages are too heavy to ship with the USPS. These must be shipped via UPS International. Return Policy We always accept returns if the item is not as stated. Returns are handled as repair. Replacement, or refund at our discretion. We work with our customers to bring any problems to an acceptable resolution. 100% customer satisfaction is our goal. 95% of our boxes are shipped within 1 day of receipt of payment. We respond promptly to al
|
|
|
Pace PPS-100A 115V PPS100A DESOLDERING DUAL PATH SOLDER Rework Station Soldering
Manufacturer: Pace Model: PPS-100A Condition: Worked great last time used. Been sitting in storage for a few years as we purchased a more modern Metcal system. AS IS due to age Comes with desoldering wand. Tips and tool holder.
|
|
|
76lbs of Various Soldering Equipment | 1x Hakko 472D Desoldering Station
ebay template We answer all e-mails, Monday to Friday 8am- 5pm est. Please contact us using"Ask a question" link at the bottom of this page. You are bidding on 76lbs of various soldering equipment with the following specifications: QTY: 76lbs Manufacturer: Various Model Number: Various Category: Test Equipment Type: Soldering Equipment Notes: Includes: 1x Hakko 472D Desoldering Station. This auction only includes what is shown in the photographs. If it is not shown. Please assume it is not included. Please ensure this item is compatible with your intended application before placing a bid. This item has cosmetic scratches/scuffs on its case. As shown in the attached photographs. This item has been successfully powered on but we do not have the means to test for fit and function; therefore. We cannot guarantee it will operate as intended. ... moreThis item must ship via freight. You are responsible for arranging the freight shipment for this order. Please contact customer support for accurate weights and dimensions. We would also allow local pick up on order. Please bid accordingly. This purchase can be made with complete confidence because we offer a 14 day. Money back guarantee. This auction will ship from our Lecanto. FL facility. Please bid accordingly. Our shipping carriers are UPS and USPS. Any orders of $250.00 or more will be shipped with Signature Required. Please make sure you are available to sign for these orders. We ship Monday-Friday. Please allow up to 3 days after payment is received for shipment. We ship to the Continental US on all of our auctions. For items shipping freight. You will be responsible for arranging the freight shipment. Please contact customer support for accurate weight and dimensions. Buyer is responsible for shipping insurance. Some items are shipped to Canada and/or Overseas. We ship up to 75 pounds overseas via USPS. You are responsible for all customs fees and duties. Please read the auction description. Buyer is responsible for import fees/tax/duties. We will not mark your
|
|
|
Hakko 850 SMD Rework Station AC120V-280W 60Hz SOLDER
Hakko 850 SMD Rework Station AC120V-280W 60Hz SOLDER TESTED POWER ON. AS IS.
|
|
|
Radioshack Electronics Digital Soldering Station Tool
This soldering station takes the guesswork out of the temperature equation. You simply enter a desired Fahrenheit or Celsius setting. As the iron heats up. The temperature reading on the LCD display increases so you can easily see when it's ready to use. There are even three presets that enable you to select frequently used temperatures with the push of a button. Makes it easy for you to select the exact temperature you need for your specific application. Digital LCD display. Interchangeable between Fahrenheit and Celsius. Display shows temperature setting and actual temperature. Ideal for lead-free solder. Rosin-core, lead-based, silver-bearing or any other 3 temperature presets for frequently used temperatures Detachable iron with pencil-style tip Includes cradle stand Temperature range from 302-842° Fahrenheit(150-450° Celsius) ... moreWhat's in the box: Soldering iron temperature control box Detachable soldering iron stand Soldering iron Sponge Owner's manual
|
|
|
Vintage Weller Soldering Station Model WTCPL Series
Up for bid is a vintage Weller soldering station model WTCPL. This is made in the USA. Comes with the tech sheet. Works fine. The light works and so does the switch. It green in color. No cracks in the plastic. Comes with the tip. I do not have the sponge. You can find a new sponge and different tips at Fry's electronics. Operates on 120 volts 50/60 Hz 60 watts. It is well made and works fine. It is ready to do your soldering projects. I think it is made in 1971. You can change the tips for different temps and shape. Sold as is and no returns. Happy bidding! 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14a652d5d9d-0x105-
|
|
|
Hakko FX-888 Soldering Station with Soldering Iron/Bundle
Hakko FX-888 Soldering Station with Soldering Iron/Bundle. Nice pre-owned condition.
|
|
|
HAKKO 939-1 Programmable Digital Soldering Station, complete with Key & Iron
Hakko 939 Soldering Station. Complete with Iron& Keycard, Excellent shape Includes: 939 soldering station. Key Card(needed to reprogram the temperatures) 909 Soldering handle with Temperature controlled'pencil type' tip 631 Iron holder( used sponge) Photos are of the actual item This is a great soldering iron for home or lab use. It is ESD protected and has fast warmup and recovery. The thermostat(temperature feedback) is in the tip itself! The key card is a replacement that we had made when we lost a few of the originals Minimal wear& tear(used in an engineering lab. Not a production setup) Works great. Kept as a spare for a while& now we need the space(We upgraded to a style with very quick tip changes) Copy of user manual is available here: http:www.cherrycollectibles.com/Ebay_picts/Hakko_939_manual.pdf new price was ... moreover $400
|
|
|
JBC BD-1A BD SOLDERING STATION
FOR SALE JBC BD SOLDERING STATION MODEL BD-1A INCLUDES THE T245-A GENERAL PURPOSE HANDLE. WORKS WITH THE 245 CARTRIDGES(NOT INCLUDED) TESTED WORKING CONDITION POWER CORD IS INCLUDED
|
|
|
Hakko 850B SMD Hot Air Solder/Desoldering Rework Station With Nozzle.300W-120V
You are bidding on a used working Hakko 850B Hot Air Rework Station With Nozzle. The unit is in excellent condition. Hardly used, quiet and the air is very hot. Payment is only accepted by PayPal with confirmed address. I ship to 48 lower states in the US only and do not ship to PO Boxes. Thank you for looking
|
|
|
Vintage Weller Soldering iron Station Model WTCPL Series from ham radio estate
Vintage Weller Soldering Station Model WTCPL Series fromham radio estate. tested and works. Gets hot fast. needs q-tip cleaned up, some dust. see pictures, great for any bench. priced to sell. thanks
|
|
|
WELLER EC2001 SOLDERING STATION Variable Temperature Control Broken for Parts
Weller Soldering unit for sale. It was working just fine and then quit one day. I don't know what part goes bad but I can't imagine that there is a lot to these things. Anyway. I bought another so this one is up for grabs. Sold as is for parts or repair.
|
|
|
RPS Robitic Process Systems Soldering Pot Bath Dip Station Digital Made in USA
ROB0TIC PROCESS SYSTEMS SOLDERING SYSTEM MODEL SSPC-10 110VAC. 60Hz, 15AMP, 1PH Temperature is controlled by Syscon REX-C100 MODEL SSP-24 110VAC. 60Hz, 15AMP, 1PH MADE IN THE USA 96 800x600 Normal 0 false false false EN-US JA X-NONE WE ALWAYS SHIP WITHIN ONE BUSINESS DAY AFTER PAYMENT CLEARS Please note that we pride ourselves on being honest eBayers and we do not spike our shipping prices or charge handling fees.what you see are the actual rates we pay and are calculated prices based upon our location in Temecula. CA(USA) to your address you have on file on eBay(if no rates are shown, please sign in on eBay)
|
|
|
110-220 electrical power station
Up for auction is my electrical power station.its used but very little. I used it so I could use 2- 220 sanding machines.it still works great.there are 4-110 plug ins and 2-30 amp 250 volt 3 prong twist lock plug ins.it has permanent 3 prong range plug in.it also comes with a 4 ft dryer 3 prong plug in in case you can't reach a range plug.i had a electrician to put this together for me so I know it's code.good luck.
|
|
|
Pace Soldering Iron Hot Cubby for Dual Path Sodr-X-Tractor Desoldering Station
Pace Soldering Iron Hot Cubby for Dual Path Sodr-X-Tractor Desoldering Station Used. As pictured. Please Read BEFORE Bidding! Buyer Protection: Your purchase is covered by eBay's Money Back Guarantee if this item arrives broken or somehow not as described. Read the description carefully. And know what you are buying as we do not offer returns for any other reasons. Best Offers: Please do not write and ask"Will you take $x.xx? Or What's the least you will take? Use the"Make Offer" button. Shipping: Please note: Shipping is not negotiable. eBay checkout will charge shipping regardless of what you write in the"notes" section when you make an offer. International Shipments: We ship internationally through eBay's Global Shipping Program. Please note: eBay's Global Shipping Program does not allow combined ... moreshipments. International bidders should check with eBay before bidding. Combined Shipping: We will gladly combine shipping on multiple purchases to domestic destinations. If you are purchasing more than one listing. Wait to pay until you receive and invoice with combined shipping cost. eBay's Global Shipping Program does not allow for combined shipping so contact me first if you are an international bidder. Non-Paying Bidders: A Non-Paying Bidder Case will open automatically if payment is not received after 3 days of listing's end. Problems/ Discrepancies: If you have a problem with your purchase. Please contact us through eBay Messages BEFORE opening a case or leaving feedback. We will gladly work with you to resolve any problems. See my other auctions for more radios and other good stuff!
|
|
|
Pace Soldering Iron Handpiece for Dual Path Sodr-X-Tractor Desoldering Station
Pace Soldering Iron Handpiece for Dual Path Sodr-X-Tractor Desoldering Station 120 VAC Used. Tested and Working. Please Read BEFORE Bidding! Buyer Protection: Your purchase is covered by eBay's Money Back Guarantee if this item arrives broken or somehow not as described. Read the description carefully. And know what you are buying as we do not offer returns for any other reasons. Best Offers: Please do not write and ask"Will you take $x.xx? Or What's the least you will take? Use the"Make Offer" button. Shipping: Please note: Shipping is not negotiable. eBay checkout will charge shipping regardless of what you write in the"notes" section when you make an offer. International Shipments: We ship internationally through eBay's Global Shipping Program. Please note: eBay's Global Shipping Program does not ... moreallow combined shipments. International bidders should check with eBay before bidding. Combined Shipping: We will gladly combine shipping on multiple purchases to domestic destinations. If you are purchasing more than one listing. Wait to pay until you receive and invoice with combined shipping cost. eBay's Global Shipping Program does not allow for combined shipping so contact me first if you are an international bidder. Non-Paying Bidders: A Non-Paying Bidder Case will open automatically if payment is not received after 3 days of listing's end. Problems/ Discrepancies: If you have a problem with your purchase. Please contact us through eBay Messages BEFORE opening a case or leaving feedback. We will gladly work with you to resolve any problems. See my other auctions for more radios and other good stuff!
|
|
|
Weller MC5000 ESD Digital Adjustable Temp Soldering Station 120 VAC 2462
Weller MC5000 ESD Digital Adjustable Temp Soldering Station 120 VAC This unit has been tested to be 100% operational. Pictures are of the actual item being sold. Please email with any questions and thanks for looking. 14 Great Reasons to Buy From Clearance-Now All our items are from a smoke free environment. Please send an e-mail with any questions for a quick response. Your winning bid will be professionally packaged and shipped fully insured so that it arrives in perfect condition. We do our best to accurately photograph and describe each item so that there are no surprises when you receive your package. Items not paid for within 3 days will be relisted and the transaction canceled. If there is a problem when you receive your shipment. Please contact us so that we can correct the problem ASAP. Please contact us before leaving negative or ... moreneutral feedback so that we have a chance to correct the problem. Each shipment is followed by a tracking number so you know exactly when your item will arrive. Most items are shipped the same business day. Items purchased after noon pacific time will ship the next day. We will combine shipping so if you purchase multiple items you will get a discount on shipping. We do not charge a handling charge. We only charge you our actual shipping costs. The photographs you see in our auctions are of the actual item being sold. When you pay for your item we will instantly leave you positive feedback. Fast friendly service where our customers come first. Every buyer gets a MyStoreRewards invitation for cash back end_display_feedback_code_window_gsrx_vers_526(GS 6.6.6(526)
|
|
|
Weller EC2001 ESD Digital Adjustable Temp Soldering Station 120 VAC 2461
Weller EC2001 ESD Digital Adjustable Temp Soldering Station 120 VA This unit has been tested to be 100% operational. Pictures are of the actual item being sold. Please email with any questions and thanks for looking. 14 Great Reasons to Buy From Clearance-Now All our items are from a smoke free environment. Please send an e-mail with any questions for a quick response. Your winning bid will be professionally packaged and shipped fully insured so that it arrives in perfect condition. We do our best to accurately photograph and describe each item so that there are no surprises when you receive your package. Items not paid for within 3 days will be relisted and the transaction canceled. If there is a problem when you receive your shipment. Please contact us so that we can correct the problem ASAP. Please contact us before leaving negative or ... moreneutral feedback so that we have a chance to correct the problem. Each shipment is followed by a tracking number so you know exactly when your item will arrive. Most items are shipped the same business day. Items purchased after noon pacific time will ship the next day. We will combine shipping so if you purchase multiple items you will get a discount on shipping. We do not charge a handling charge. We only charge you our actual shipping costs. The photographs you see in our auctions are of the actual item being sold. When you pay for your item we will instantly leave you positive feedback. Fast friendly service where our customers come first. Every buyer gets a MyStoreRewards invitation for cash back end_display_feedback_code_window_gsrx_vers_526(GS 6.6.6(526)
|
|
|
Pace MP-1 Micro Portable Soldering Desoldering Station Sodr-X-Tractor As-Is
Pace MP-1 Micro Portable Soldering Desoldering Station Sodr-X-Tractor As-Is Motor runs and makes vacuum but Heater and glass chamber are missing so I am selling As-Is for Parts or Repair. Only what you see is included and nothing else. Please Read BEFORE Bidding! Buyer Protection: Your purchase is covered by eBay's Money Back Guarantee if this item arrives broken or somehow not as described. Read the description carefully. And know what you are buying as we do not offer returns for any other reasons. Best Offers: Please do not write and ask"Will you take $x.xx? Or What's the least you will take? Use the"Make Offer" button. Shipping: Please note: Shipping is not negotiable. eBay checkout will charge shipping regardless of what you write in the"notes" section when you make an offer. International Shipments: ... moreWe ship internationally through eBay's Global Shipping Program. Please note: eBay's Global Shipping Program does not allow combined shipments. International bidders should check with eBay before bidding. Combined Shipping: We will gladly combine shipping on multiple purchases to domestic destinations. If you are purchasing more than one listing. Wait to pay until you receive and invoice with combined shipping cost. eBay's Global Shipping Program does not allow for combined shipping so contact me first if you are an international bidder. Non-Paying Bidders: A Non-Paying Bidder Case will open automatically if payment is not received after 3 days of listing's end. Problems/ Discrepancies: If you have a problem with your purchase. Please contact us through eBay Messages BEFORE opening a case or leaving feedback. We will gladly work with you to resolve any problems. See my other auctions for more radios and other good stuff!
|
|
|
Pace SensaTemp ThermoPik Handpiece 24 VAC 35W Desoldering Station Sodr-X-Tractor
Pace SensaTemp ThermoPik Handpiece 24 VAC 35W Desoldering Station Sodr-X-Tractor Tested and Working. Only what you see is included and nothing else. Please Read BEFORE Bidding! Buyer Protection: Your purchase is covered by eBay's Money Back Guarantee if this item arrives broken or somehow not as described. Read the description carefully. And know what you are buying as we do not offer returns for any other reasons. Best Offers: Please do not write and ask"Will you take $x.xx? Or What's the least you will take? Use the"Make Offer" button. Shipping: Please note: Shipping is not negotiable. eBay checkout will charge shipping regardless of what you write in the"notes" section when you make an offer. International Shipments: We ship internationally through eBay's Global Shipping Program. Please note: eBay's ... moreGlobal Shipping Program does not allow combined shipments. International bidders should check with eBay before bidding. Combined Shipping: We will gladly combine shipping on multiple purchases to domestic destinations. If you are purchasing more than one listing. Wait to pay until you receive and invoice with combined shipping cost. eBay's Global Shipping Program does not allow for combined shipping so contact me first if you are an international bidder. Non-Paying Bidders: A Non-Paying Bidder Case will open automatically if payment is not received after 3 days of listing's end. Problems/ Discrepancies: If you have a problem with your purchase. Please contact us through eBay Messages BEFORE opening a case or leaving feedback. We will gladly work with you to resolve any problems. See my other auctions for more radios and other good stuff!
|
|
|
Pace MBT-200 MicroBench Top Soldering Desoldering Station Sodr-X-Tractor As-Is
Pace MBT-200 MicroBench Top Soldering Desoldering Station Sodr-X-Tractor Accessory outlets work. And motor runs but no vacuum so I am selling As-Is for Parts or Repair. Only what you see is included and nothing else. Please Read BEFORE Bidding! Buyer Protection: Your purchase is covered by eBay's Money Back Guarantee if this item arrives broken or somehow not as described. Read the description carefully. And know what you are buying as we do not offer returns for any other reasons. Best Offers: Please do not write and ask"Will you take $x.xx? Or What's the least you will take? Use the"Make Offer" button. Shipping: Please note: Shipping is not negotiable. eBay checkout will charge shipping regardless of what you write in the"notes" section when you make an offer. International Shipments: We ship internationally ... morethrough eBay's Global Shipping Program. Please note: eBay's Global Shipping Program does not allow combined shipments. International bidders should check with eBay before bidding. Combined Shipping: We will gladly combine shipping on multiple purchases to domestic destinations. If you are purchasing more than one listing. Wait to pay until you receive and invoice with combined shipping cost. eBay's Global Shipping Program does not allow for combined shipping so contact me first if you are an international bidder. Non-Paying Bidders: A Non-Paying Bidder Case will open automatically if payment is not received after 3 days of listing's end. Problems/ Discrepancies: If you have a problem with your purchase. Please contact us through eBay Messages BEFORE opening a case or leaving feedback. We will gladly work with you to resolve any problems. See my other auctions for more radios and other good stuff!
|
|
|
Pace Desoldering Station 7008-0125-02 with Handpiece Dual Path Sodr-X-Tractor
Pace Desoldering Dual Path Sodr-X-Tractor Station Part Number 7008-0125-02 Handpiece Part Number 6010-0033-01 Unit works but flow control knob is missing. And glass chamber is chipped on one end. For these reasons, I'm selling As-Is, For Parts or Repair, but it Doesn't affect operation. Please Read BEFORE Bidding! Buyer Protection: Your purchase is covered by eBay's Money Back Guarantee if this item arrives broken or somehow not as described. Read the description carefully. And know what you are buying as we do not offer returns for any other reasons. Best Offers: Please do not write and ask"Will you take $x.xx? Or What's the least you will take? Use the"Make Offer" button. Shipping: Please note: Shipping is not negotiable. eBay checkout will charge shipping regardless of what you write in the"notes" ... moresection when you make an offer. International Shipments: We ship internationally through eBay's Global Shipping Program. Please note: eBay's Global Shipping Program does not allow combined shipments. International bidders should check with eBay before bidding. Combined Shipping: We will gladly combine shipping on multiple purchases to domestic destinations. If you are purchasing more than one listing. Wait to pay until you receive and invoice with combined shipping cost. eBay's Global Shipping Program does not allow for combined shipping so contact me first if you are an international bidder. Non-Paying Bidders: A Non-Paying Bidder Case will open automatically if payment is not received after 3 days of listing's end. Problems/ Discrepancies: If you have a problem with your purchase. Please contact us through eBay Messages BEFORE opening a case or leaving feedback. We will gladly work with you to resolve any problems. See my other auctions for more radios and other good stuff! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-14be8aea91e-0x100-
|
|
|
Pace MP-1 Micro Portable Soldering Desoldering Station Industrial 7008-0148
Search our eBay Store! Pace MP-1 Micro Portable Soldering Desoldering Station Industrial 7008-0148 SKU: JV-MAT-A-PACEMICROMP1 Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Pace MP-1 Micro Portable Soldering Desoldering Station Industrial 7008-0148 Model: MP-1 Type: 7008-0148 Unit powers on with indicator light. Unit Dimensions(L" x W" x H" 9.75*4.25*3 As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10, with 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. All images taken in house of the unit(s) ... morebeing sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. D0 N0T bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. Our Contact: SVC ASSET M
|
|
 |