|
Sheldon Lathe Hardinge 2L Collet Adapter 1 3/4" -8 & Thread Protector
All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. International Bidders Please Inquire About Shipping Cost Prior To Bidding SOTTOF SALES Removed from a Model KS 11" Sheldon Lathe serial number 1411 from about 1940. May fit other models. This lathe was a good working lathe with minimal wear but was stored in a building with a bad roof and the lathe had quite of bit of moisture around it the last couple of years and had rust in areas, most parts are very dirty and have some rust but not worn out. This adapter and thread protector look shop made but functional. The collet is 11/16" and fairly worn. The adapter does not have a pin for collet alignment but does have the hole for one. The thread protector/collet ejector has a 1 3/4" 8 ... morethread. The head stock in the last photo is not included. D4079.1.5 D4079.1.5 EBAY AUCTION POLICIES: Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Power
|
|
|
LOT OF 3 BROWN & SHARPE NO.9 TAPER TOOL HOLDERS COLLET CHUCK, MILLING ARBOR
Lot of 3 Brown& Sharpe No.9 Taper Tool Holders Lot Includes: Brown& Sharpe Model No. 152 Collet Chuck w/ Collet 7/8" Saw Arbor 1/2" Saw Arbor No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday thru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced ... moreby us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
|
|
|
9/16" Hole x 1-3/8" shank Mill machine Adapter Reducing Tool Holder reducer
Item. Some type of reducer Adaptor but this one does not have or use a set screw like most end mill adapters. Not sure what type of machine this goes with? Manufacturer. Unknown Model. X-27987 A Hole. 9/16" 562" Shank. 1-3/8" Round with a.571" hole in the end of the shank that goes all the way through the holder Length. 4-7/8" Overall Condition. Very Nice We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send ... moreyou a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9395,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3
|
|
|
*Vintage GREENERD Arbor Press*Cast Iron*Model #1*Work Bench Mounted Hand Tool*NR
Vintage GREENERD Arbor Press*Cast Iron*Model#1*Work Bench Mounted Hand Tool*NR click to Enlarge click to Enlarge click to Enlarge Description: With NO RESERVE. This is for the pictured piece, which in is working condition, but could use a better cleaning/servicing. It shows some surface, and still has some original paint. Opening goes to about 4 1/2" THANKS FOR STOPPING TO LOOK! What you see in the Pictures, is what is Included, so please don't'Assume' that there is a box, instructions, or other parts/pieces unless you see them! Payments other then Paypal must be approved PRIOR to bidding! Shipping: Shipping amounts are estimated. Actual rates may be lower, but never higher, and we Cannot ship to PO Boxes! ATTN: We are now getting a slight discount from UPS which is not reflected in the Shipping Calculator, so actual shipping ... morecosts should run a couple/few dollars lower then shown! Due to time/work restraints shipping methods may change, but posted rate will not increase. SHIPPING CHARGES(Mainly UPS) TO BE DETERMINED AT END OF AUCTION, DUE TO WEIGHT/LOCATION VARIANCE& SHIPPING of items will take place a day or two after payment is verified. From 01104) WE CAN ALMOST ALWAYS COMBINE SHIPPING ON MULTIPLE WINS WITHIN A FEW DAYS OF EACH OTHER. If Returns/Refunds Become Necessary, Shipping IS NOT Included! Payment: ATTN: Many of my Auctions contain items that I have no history on. Therefore Smoke/Odor Free cannot be guaranteed! Re: FEEDBACK-Feedback will be returned after the winner is satisfied& has already left it-Sorry, but this is how it must be! I am not able to accept Credit/Debit Cards directly! ALSO-Questions asked within the last 12 hours of an Auction may not be answered(Only have computer access Mondays, Tuesdays, Fridays) OFFERS ALWAYS CONSIDERED! inkfrog terapeak. I000000.
|
|
|
Famco 1/2 ton arbor press. Bench top. Fast shipping!!!!
What we have is a great used desktop Famco arbor 1/2 ton press. Comes as you see it. No extras included. Any questions. Please feel free to ask before the auction ends. Shipping to confirmed Paypal address only! No PO Boxes! Happy bidding. Thanks for looking.
|
|
|
PNEUMATIC PRESS BENCH PRESS AIR CLICKER PRESS QUICK RELEASE 1" STROKE
Sale is for One(1) USED PNEUMATIC PRESS W/ QUICK RELEASE 1" STROKE This has very light scratches This has been tested and works as it should with no leaks This comes as shown Spec's; Stroke- 1" Max Opening- 6-1/2" Max height- 21-3/4" Width- 7" Depth- 10-3/4" Weight- 29.2 lbs Customer pick-ups welcome at; KAE Industrial 3145 Akron Road Wooster.Ohio 44691 We Combine Shipping Location- A-5-2 Thanks Kurt
|
|
|
ORTMAN FLUID POWER BENCH TOP PRESS HYDRAULIC PRESS 1" STROKE 3000 PSI
Sale is for One(1) USED ORTMAN FLUID POWER BENCH TOP PRESS HYDRAULIC PRESS 1" STROKE 3000 PSI This has some scratches shown in photos This comes as shown The one shown in the photos is the one you receive Spec's; Height- 21-1/2" Width- 6-3/4" Depth- 7-1/2" Bore- 3-1/4" Stroke- 1" Weight- 68 Customer pick-ups welcome at; KAE Industrial 3145 Akron Road Wooster.Ohio 44691 We Combine Shipping Location- P-1-5 Thanks Kurt
|
|
|
COLLIS 2" SHANK x NO.3 MORSE TAPER EXTENSION ADAPTER SLEEVE 9" OAL
COLLIS NO.3 MORSE TAPER ADAPTER SLEEVE 2" O.D. SHANK 9" OVERALL LENGTH Nice used condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. Thanks for looking!
|
|
|
2" OD SHANK x NO.4 MORSE TAPER ADAPTER SLEEVE #4MT
NO.4 MORSE TAPER ADAPTER SLEEVE 2" O.D. SHANK 4-3/4" OVERALL LENGTH Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. Thanks for looking!
|
|
|
2" OD SHANK x NO.3 MORSE TAPER ADAPTER SLEEVE #3MT
NO.3 MORSE TAPER ADAPTER SLEEVE 2" O.D. SHANK 4-3/4" OVERALL LENGTH Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. Thanks for looking!
|
|
|
Nice Vintage Royal Bridgeport R8 Stub Mill Adapter Arbor
Nice Vintage Royal Bridgeport R8 Stub Mill Adapter Arbor Comes with 1/2 cutter shown. Arbor size is 7/8" Nice condition and not some cheap Chinese crap. $6 shipping. Will combine shipping. Be sure and check my feedback. Thanks.
|
|
|
DAKE NO. 1 ARBOR PRESS 3 TON HAND PRESS BENCH BLACKSMITH + EXTRAS
This is a genuine DAKE No.1 Arbor press. It is in excellent working condition and includes the 4 press plates as shown and the sturdy custom made dolly(machine is not fastened to the dolly) with heavy casters and metal pull hitch for easy moving and storage. The throat carry is 12" and 7" deep. The ram runs fully and smoothly. Thank you!
|
|
|
Armstrong Knurling Tool no 3 k1 Rotating 3 Sizes Of Knurls Lathe Southbend
Armstrong rotating knurling holder. 3 sizes of knurles on this thing. All the knurles are good. No3. K1. Thanks for looking. Posted with
|
|
|
South Bend Heavy 10 Lathe Head Stock Collet Adapter Morse Taper #3 MT3 3MT
Up for sale here is a South Bend Heavy 10 Lathe Headstock Collet Adapter Morse Taper#3 MT3 3MT. This fits in South Bend's proprietary headstock taper(almost but not quite a MT5) and allows you to hold Morse taper#3 shanks in your lathe headstock. These are great for running on centers with a drive plate. Used in good condition. Feel free to ask any questions. SCT3468
|
|
|
3AT to MT 3 Spindle Adapter for Atlas or Logan Lathes
This a used Precision 3AT to MT3 adapter that will fit on most Atlas and Logan lathes. This is American made. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-144a786f2ed-0xf2-
|
|
|
5 SLITTING SAW ARBORS AND BLADES
R-8 SLITTING SAW ARBOR WITH SEVERAL SPACERS. IN GREAT SHAPE. R-8 SPRING LOADED STEPPED I.D. SAW HOLDER IN FAIR SHAPE. STILL WORKS GOOD. SET OF 3 ARBORS FOR 1/2. 3/8 AND 1/4" HOLE BLADES HAS SEEN VERY LITTLE USE IF ANY! THE BLADES ARE AS FOLLOWS: 1 INCH DIA. MOUNTING HOLES. 4" DIA. CUTTER X 1/2" WIDE X 5/16 X 3/32(2) X 1/16 3" X 3/8 X.218 X 5/32 X 3/16 X 1/8(2) X 7/64 X 3/32 X 1/16(2) X.050 X.064 X.072 X.051(3) X.028(2) X.036(4) 3/4 MOUNTING HOLE 1.700 DIA. X.128 5/8 DIA. MOUNTING HOLE 2 1/4" DIA. X.016(2) X.010(3) X.018(4) X.020(3) X.032 X.025(2) X.014 1/2" DIA. MOUNTING HOLE X.032 3/8 DIA. MOUNTING HOLE X.020(3) X.032(2) Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Large Bolt Threading Tap Driver 1-1/4" shank size Tool Holder Pipe npt Adapter
Item. Large straight shank quick change mill tool holder for holding Thread taps. I am not sure if it is for holding NPT pipe taps or bolt thread taps. Overall Length. 5-1/8" Shank. 1.250" diameter round The Largest outside diameter measures about 1.875" The hole measures.876" round and 2.115" deep. I have no way to measure the size of the square drive down inside Manufacturer. Unknown Condition. Nice used. Equipped with one cap screw that should be replaced with a set screw for safety before use. It does have some light corrosion starting, nothing serious. We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are ... morewilling to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my Ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my Ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd. NW Grand Rapids. MI 616-791-9395
|
|
|
STARRETT PIN VICE 166A
STARRETT PIN VICE 166A CONDITION: Used– Normal Wear and Tear Good Working Condition– See Photos Will Combine Shipping– Request Invoice All items are shipped USPS economy and same cost to all buyers. So please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. Typically the shipping charge will be less than the actual cost to ship. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used Should there be a shipping difference that money will be immediately refund. Please e-mail with questions
|
|
|
Lath Or Drill Press Arbor Adapter For Machine Tools. #3 morse
I don't know the brand. Tool is in good condition. Tool is six inches long. Posted with
|
|
|
SLITTING CUTTER 3 PIECE SET
SLITTING CUTTER 3 PIECE SET CONDITION: Used– Normal Wear and Tear Good Working Condition– See Photos 1” 3/4” SHANK 7/8” 3/4" SHANK 5/8” 5/8” SHANK Will Combine Shipping– Request Invoice All items are shipped USPS economy and same cost to all buyers. So please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. Typically the shipping charge will be less than the actual cost to ship. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used Should there be a shipping difference that money will be immediately refund. Please e-mail with questions
|
|
|
ADAPTER 1/2” TO 1” – END MILL / TOOL BIT
ADAPTER 1/2” TO 1” END MILL/ TOOL BIT CONDITION: Used– Normal Wear and Tear Good Working Condition– See Photos Will Combine Shipping– Request Invoice All items are shipped USPS economy and same cost to all buyers. So please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. Typically the shipping charge will be less than the actual cost to ship. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used Should there be a shipping difference that money will be immediately refund. Please e-mail with questions di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-144aa6a7638-0x111-
|
|
|
Syneo Accu-Punch Manual Hole Punch Press
FOR SALE IS A USED SYNEO ACCU-PUNCH MP SERIES PRESS FOR USE IN PRECISION CORING AND HOLE CUTTING PROCESSES. INFO: THESE SELL NEW FOR SEVERAL HUNDRED DOLLARS. PURCHASED AT A MEDICAL DEVICE COMPANY FIRE SALE. THE UNIT IS IN GREAT CONDITION. DUE TO THE VERY HEAVY WEIGHT I WILL ONLY CONSIDER LOCAL PICKUP WITHIN THE SF BAY AREA. PLEASE EMAIL ME FOR DETAILS. BUYER PAYS BID PLUS ARRANGEMENT OF PICKUP AT AN AGREED UPON LOCATION. IF YOU FEEL YOU MUST SHIP THE ITEM. YOU ARE RESPONSIBLE FOR ALL SHIPPING COSTS, SINCE THIS ITEM WEIGHS IN EXCESS OF 25 POUNDS. PAY VIA PAYPAL ONLY. US FUNDS BIDS AND SHIP ONLY.
|
|
|
Morse 2 Taper To 7/8" Straight Socket
This is an interesting Morse taper adapter. It is a#2 Morse taper on the ID. And the body is 7/8" diameter straight with a tightening nut on the back. 1-7/8" overall length. Would be great to use for making your own special tailstock or holder, only requiring you to have a 7/8" bore, although you could bush it and go to 1" OD for instance. Own it for cheap money. Only one like this I have ever had. Real nice condition. Overseas and Canada. Please inquire for actual costs. Good luck& thanks for looking! Please check out our Ebay store for other items of possible interest.
|
|
|
CLAUSING 5-C COLLET SLEEVE ADAPTER 5900 6900 SERIES 12" & 14" LATHE VERY GOOD 5C
I BELIEVE THIS IS A CLAUSING 5-C COLLET SLEEVE ADAPTER FOR 5900 6900 SERIES 12" 14" LATHE BUT I'M NOT 100% SURE HERE ARE THE MEASUREMENTS CHECK TO BE SURE IT FITS YOUR LATHE. Overall-3.57 long Out Side Taper- 2.38 to 2.21 Inside nose after taper for collet- 1.3 id and 1.25 inner surface with a pin. A 5c collet fits nice and tight.
|
|
|
Large Milling Chuck End Mill Holder Arbor MT5 by S. Osborn -"Titanic"
Vintage S. Osborn high quality"Titanic" end mill holder with 6 collets for LARGE endmills. sizes 1.250. 1.500 and 2.000) Comes with: 3-threaded collets 3-regular straight collets with 1 locking sleeve 1- step down adapter for smaller endmills with knurled locking nut. stamped TITANIC) 2- 4" octagon collet nuts MT5 Morse Taper with removable tang with 5/8" thread. Very Heavy Duty Made in Sheffield. England Had very little use by recently retired German machinist. Complete in Original wood box. Weighs a whopping 27lbs! Note: Threads on smaller collet holder(pointing to spot in pic) have a flat spot but collet nut threads on nicely by hand and does not affect use. Buyer pays actual shipping. I will combine shipping as always. Will ship the following day or same day after payment is made. Thanks and Happy Bidding!
|
|
|
Lathe Headstock Reducing Sleeve, 4MT to 6MT
Headstock sleeve. 6 Morse outside taper x#4 Morse inside taper. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-144af8ef210-0x10f-
|
|
|
MICROLUX HAND TAPPEER
USED BUT IN PERFECT SHAPE MICROLUX HAND TAPPER. CHANGED HAND WHEEL TO A SHERLINE ORIGINAL WAS A POS.
|
|
|
32MM OD x 16MM REDUCER SLEEVE / BUSHING
16MM REDUCER SLEEVE 32MM O.D. SHANK Nice used condition. Actual item pictured. Payment due within 48 hours of purchase. Check. M/o, and PayPal accepted. $7.50 for USPS Priority Mail shipping with delivery confirmation. We gladly combine shipping on multiple items purchased. Please request total before checking out. Thanks for looking!
|
|
|
Collis Morse Taper Reducing Sleeves 5MT to 4MT, 3MT, 2MT
Set of Morse Taper#5 reducing sleeves. 5-
|
|
|
Scully-Jones 73413 Adjustable Adapter Floating Toolholder
07 6546-0492 This item is surplus stock in good condition. Morse taper hole#2 Shank#0 Shank 1.06"12 Body dia 1.88" Key#11 Min proj. 4.81" Axial adjustment 1.00" Total float: 0.031/038" Please email any questions or requests for additional pictures before purchasing. International buyers– please note: import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International ... moregovernment regulations prohibit such practices.
|
|
|
Beaver Tool #50 Taper Milling Arbor 24" Long 1 1/4" Diameter & 6 Bushings
You are looking at a Beaver Tool#50 Taper Milling Arbor 24" Long 1 1/4" Diameter& 6 Bushings(lengths are 3 3/4" 3 7/8" 2 pcs) 3 1/8" 2 3/8" and 2" 5/16" key slot. In good. Used condition. No nut. I made 7 photos(click on the photos to enlarge) Please view the photos below carefully. To see the condition of what is being sold. PLEASE CHECK OUT MY OTHER AUCTIONS. WHERE I AM SELLING OTHER MACHINIST STUFF: My other items Please scroll down to bottom of the listing. There might be answers to questions I get asked about this item. Combined shipping is available; every next item you buy is half price shipping. If shipping all together will be even cheaper. Then I will return the difference to your account. Buyer will pay the reasonable price. Local pick up is also available. Thank you for looking.
|
|
|
USED FALCON KWIKLOK 1.250" SMA SHELL MILL ARBOR 1-1/4" TISA-6-20
LISTING IS FOR A USED FALCON KWIKLOK SHELL MILL ARBOR BRAND: FALCON STYLE: KWIKLOK PART# TISA-6-20 ARBOR SIZE: 1.250" GAGE LENGTH: 1.45" CONDITION: VERY GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, ... moreAMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY QUESTIONS ABOUT THIS OR ANOTHER LISTING. PLEASE CALL DAVE
|
|
|
Cincinnati Horizontal Milling Machine Arbor Support Pair
Pair of Cincinatti Milling Machine Arbor Support: Aluminum construction; flat of table to centerline of bushing 7 1/4" widest width of dovetail 5.750" narrowest width of dovetail 4.650" Any questions call Tim@ 412-922-8915
|
|
|
COLLIS USA NO.2 MORSE TAPER EXTENSION ADAPTER 2X2
COLLIS NO.2 MORSE TAPER EXTENSION MADE IN U.S.A. 2MT SOCKET/ 2MT SHANK Good used condition. As pictured. Payment due within 48 hours of purchase. Check. M/o, and PayPal accepted. $7.50 for USPS Priority Mail shipping with tracking. Thanks for looking!
|
|
|
DEVLIEG T50 MICROBORE C12 COLLET HOLDER with new 1.5 Collet, Bearing,&washer
Devlieg KANTO Microbore Collet holder. Number T50U-BC12-E3 made in Japan by Kanto. Light rust and staining but the tapers are like new no rust on collet taper, this holder has a 4 in projection and has been sitting 30 years so selling in used condition. The 1.5 dia collet, bearing, and washer are in new condition. What you see is what you get. Last one.
|
|
|
Sun Rod Hone with Cap Cutter and Mandrels
One Sun rod hone with cap cutter and 2 mandrels. Mandrel sizes are CR 2100. Does 2.100 to 2.300 and CR 2300, does 2.300 to 2.500. 110 electric. Used condition
|
|
|
3 Bilz Universal MAX FLOAT Spindle AdapterHolder Model 219
For your consideration: we are offering these 3 Bilz Universal spindle adapter tool holders Max Float Model 219 These were used as floating tap holders on a piece of retired machinery
|
|
|
Atlas Mill Milling Machine MFC M1 60 Arbor Support Ex Cond
You are bidding on a#M1 60 arbor support for the MFC Atlas Milling machine. Great condition. Clean and shows no signs of abuse. Bolt for pinch is new. Works fine and would help complete your Atlas Mill. Winner to send payment within 10 days from end of auction. Shipping is based on a 3 LB boxed weight. Note we will not be responsible for fees or delays due to customs on foreign shipping. We ship on Mondays. Thanks and good luck.
|
|
|
CRITERION 3/8 SHANK HSS .090 WIDE GROOVING BORE BAR 4.5 LONG
USED CRITERION BRAND HSS.375 SHANK 4.5 INCHES LONG. 090 WIDE GROOVING BAR. YOU WILL GET AS YOU SEE IN PICTURES. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-144d869e440-0x10e-
|
|
|
CIRCLE 1.00" SHANK HSS INSERT HOLDER BORE BAR 5.25 LONG
USED CIRCLE BRAND HSS 1. SHANK 5.25 INCHES LONG. LIGHT ENGRAVING NAME ON TOOL BUT EASY TO REMOVE IT OUT. YOU WILL GET AS YOU SEE IN PICTURES.
|
|
|
bull knose adaptor for live center
adaptor that goes over your live center that goes into a larger id.will fit into 2 5/8 id.CHECK MY OTHER AUCTIONS AS I AM LIQUIDATING MACHINE SHOP TOOLS FROM MY CLOSED SHOP.LOTS TO. SELL AND WILL BE LISTING FOR THE NEXT FEW MONTHS.wILL COMBINE WINNINGS TO SAVE $ OR WILL CRAME AS MUCH AS I CAN IN A FIXED RATE PRIORITY BOX.THANKS AND BID AWAY
|
|
|
6 MIXED QUICK CHANGE TAP ADAPTERS, NIKKEN, TECNARA, BILZ
Inventory Number: 03140470571 Manufacturer: Description: 6 MIXED QUICK CHANGE TAP ADAPTERS. NIKKEN, TECNARA, BILZ Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 6, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end.Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now ... morepricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged
|
|
|
4 SMITH TOOL QUICK CHANGE TAP ADAPTERS, 1/4-P, 1/2-P, 13/16, 7/8
Inventory Number: 03140470570 Manufacturer: Description: 4 SMITH TOOL QUICK CHANGE TAP ADAPTERS. 1/4-P, 1/2-P, 13/16, 7/8 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 4, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end.Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer ... moreBuy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of
|
|
|
2 TECNARA QUICK-CHANGE TAP ADAPTERS, TPC24-13/16, TPC14-7/8
Inventory Number: 03140470569 Manufacturer: Description: 2 TECNARA QUICK-CHANGE TAP ADAPTERS. TPC24-13/16, TPC14-7/8 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 2, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end.Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now ... morepricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of dama
|
|
|
Morse Taper adapter FM Thread end, Look!
This is some sort of morse taper adapter. The hole at the large end is 11/16" I believe its a#2 morse taper, the slot is 2.5" from the end, the overall dimensions are 5-7/16" long x 1-5/16" at the large end x 1-1/16" at the small end. The small end has coarse female threads in it.There are a few dings in it, looks to be hammer marks, on the large end, overall looks to be in good condition. That's about all I know. Thanks for looking.
|
|
|
Jacobs Chuck Arbors 2-3-4 Tapers new and used
All for one price g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-144dcd3a808-0x104-
|
|
|
VINTAGE GREENFIELD ARBOR PRESS NO1 METALWORKING TOOL MACHINE NEW HAMPSHIRE
THIS AUCTION IS FOR A VINTAGE GREENFIELD ARBOR PRESS NO1 METALWORKING TOOL MACHINE NASHUA NEW HAMPSHIRE OVERALL FAIR WORKING CONDITION ~BE SURE TO SAVE THIS AUCTION TO YOUR MY EBAY PAGE BY CLICKING ON THE ABOVE ICON~*CHECK OUT THE OTHER UNIQUE COLLECTIBLES AND SPORTS MEMORABILIA WE HAVE ON TODAY* ADD US TO YOUR FAVORITE SELLER LIST TO CHECK OUT THE NEW UNIQUE ITEMS WEEKLY! IF YOU WIN ANOTHER ITEM WE CAN COMBINE SHIPPING! MY MOM THREW OUT MY BASEBALL CARDS Over 30 years specializing in collectibles and sports memorabilia! Customer Satisfaction Guaranteed! NO RESERVE! Please email with any questions… WE NOW ALSO ACCEPT PAYPAL. FOR INTERNATIONAL SHIPPING COST PLEASE EMAIL*IF YOU WOULD LIKE A SPEEDIER OPTION LIKE PRIORITY MAIL IF NOT ALREADY LISTED.PLEASE CONTACT US FOR COST ADJUSTMENT*WINNERS MAY USE EBAY CHECKOUT OTHERWISE WE WILL SEND AN EBAY ... moreINVOICE.BE SURE TO CHECK YOUR SPAM EMAIL FOR INVOICE IF YOU HAVE A SPAM FILTER Thanks for looking and good luck bidding!
|
|
|
Bearing Hand Press Tool Bench Mount
This is a bearing press tool. It has a 4- position anvil it's 15 1/2" Tall and 16" Long it has the words kabako tools inc. detroit michigan on a logo. THIS IS USED been painted silver LOOK at all the pic's to see if it's what you need it is very heavy think cast iron. Can be mounted on a bench Don't know if it's a 1/2 ton 1 ton or 1 1/2 ton. It has a 2 stamped on it if that means anything. If you need to know anything else just ask Thanks.
|
|
|
AIR MITE DAP-500 PNEUMATIC PRESS BENCH PRESS AIR CLICKER PRESS 1-1/2" STROKE
Sale is for One(1) USED AIR MITE DAP-500 PNEUMATIC PRESS BENCH PRESS AIR CLICKER PRESS 1-1/2" STROKE This has very light scratches shown in photos This has been tested and works as it should with no leaks This is variable depth Spec's; Spec's are Mfg- Air-Mite Stroke- 1-1/2" Max Opening- 8-1/2' Max height- 23" Width- 10" Customer pick-ups welcome at; KAE Industrial 3145 Akron Road Wooster.Ohio 44691 We Combine Shipping Location- P-1-5 Thanks Kurt
|
|
|
Dayton Industrial 2-Ton Arbor Press
Dayton Industrial 2-Ton Arbor Press. Press is used but still in great shape shows signs of wear from normal use. Arbor height is 13.5" Throat height is 8 5/8" Throat depth is 7.5" Max Dia. work area is 12" The press weighs 60 pounds 19"H X 10"W X 16"L. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-144dd081083-0x118-
|
|
|
.25 SHANK MICRO STOP
GOOD USED MICRO STOP.250 SHANK.COME WITH.5 X 100 deg. X.218 PILOT. YOU WILL GET AS YOU SEE IN PICTURES.TOOL HAS LIGHT ENGRAVING NAME ON IT EASY TO REMOVE.
|
|
|
.25 SHANK MINI MICRO STOP
GOOD USED MINI MICRO STOP.250 SHANK.COME WITH.375 X 100 deg. X.098 PILOT. YOU WILL GET AS YOU SEE IN PICTURES.TOOL HAS LIGHT ENGRAVING NAME ON IT EASY TO REMOVE.
|
|
|
.25 SHANK ( HALF) MICRO STOP
GOOD USED HALF MICRO STOP.250 SHANK.COME WITH.5 X 100 deg. X.247 PILOT. YOU WILL GET AS YOU SEE IN PICTURES.TOOL HAS LIGHT ENGRAVING NAME ON IT EASY TO REMOVE. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-144dd0a7889-0xfe-
|
|
|
Used Taper Shank Sleeve #5O.D. to #3 MT I.D. Hardened & Ground Save!
Used Taper Shank Sleeve#5MT O.D. and#3 MT I.D. Hardened& Ground. These sell for over $50.00 at MSC Direct! Save! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144dd0a7880-0x115-
|
|
|
.75 SHANK COLLETS HOLDER 6.0 LONG
GOOD USED COLLETS HOLDER.750 TOOL SHANK AND 6 INCHES LONG THE IS NO SHOW BRAND ON TOOL.COME WITH 3/8 COLLET. YOU WILL GET AS YOU SEE IN PICTURES.
|
|
|
Ball Swivel Dovetail Indicator Adapter 1/4" X 2-1/4" Straight Shank
Ball Swivel Dovetail Indicator Adapter 1/4" X 2-1/4" Straight Shank I n good condition- very functional ball swivel indicator adapter. Fits standard dovetails found on indicators. It was probably the most used of all the adapters that I had. This one is satin chromed. There is no rust. Some light wear is evident from the constant use. The plunger that contact the back of the indicator is brass. This is as high quality as these adapters get. Slides very nicely up and down the dovetail of the indicator and the ball allows smooth swivel for a fine adjustment before tightening. Thanks for looking!
|
|
|
2" STRAIGHT SHANK TG100 COLLET CHUCK , 7 1/2" LONG , S16-6-C6-1
UP FOR AUCTION IS A 2" STRAIGHT SHANK TG100 COLLET CHUCK. PLEASE DOUBLE CHECK P/N FOR CORRECT COLLET SIZE. P/N S16-6-C6-1 MANUFACTURER UNKNOWN. THIS IS 7 1/2 INCHES LONG THIS IS IN GOOD CONDITION.
|
|
|
1 3/4" STRAIGHT SHANK DA180 COLLET CHUCK , 7 1/2 INCHES LONG
UP FOR AUCTION IS A 1 3/4" STRAIGHT SHANK DA180 COLLET CHUCK MANUFACTURER UNKNOWN. THIS IS 7 1/2 INCHES LONG THIS IS IN GOOD CONDITION.
|
|
|
ERICKSON 1 3/4" STRAIGHT SHANK DA180 COLLET CHUCK
UP FOR AUCTION IS A ERICKSON 1 3/4" STRAIGHT SHANK DA180 COLLET CHUCK ERICKSON P/N SS175DA188762 THIS IS 7 1/2 INCHES LONG THIS IS IN GOOD CONDITION. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-144dd2d30be-0x113-
|
|
|
Collet Holders-DA 300,5 Holders /Total, used condition, 1/2 shank Diameter
For Auction Used Collet Holders that hold DA 300 collets. All have been cut down in length and some bear the name Erikson. as pictured) 5 Holders(in total) are in good condition with wear associated with being used in a machine shop. Perfect addition to your tooling in a Shop.you know you always need more than one holder for various jobs. Better to have them on hand. A must for anyone wanting to hold small diameter tools or drills. Please contact me before you bid with any questions. Thank you for looking
|
|
|
Morse Brand taper adapter 2-3 Logan South Bend MT2 to MT3 Made in USA
Taper adapter- male Morse Taper 2 to female Morse Taper 3. Made by Morse- about the best name in the business. They invented this taper. Made in the USA! Ask questions BEFORE bidding! Check my feedback and bid with confidence! If you are not satisfied with your purchase. You can return it within three days for a full refund of your bid price. Shipping charges in either direction are not refundable and are paid by the buyer. Payment by check may require up to two weeks to clear prior to shipping. INTERNATIONAL SHIPPING AVAILABLE at substantial extra cost. Please contact me PRIOR to bidding. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Arbor press! 1LB-500 1 Jamesville tool & Mfg co! #N580-44b
Arbor press! 1LB-500 1 Jamesville tool& Mfg co! N580-44b
|
|
|
TM Smith Tool Co. 3017 1-1/16"-12 Ball Lock OSA Over Spindle Adapter
07 4011003705 This item is surplus stock in good condition. Spindle 1.610" Total length 2.50" Mounting screw 5/16-24 Please email any questions or requests for additional pictures before purchasing. International buyers– please note: import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such practices.
|
|
|
Smith Tool 222-222 Adjustable Quick Change Toolholder
07 6517-0352 This item is surplus stock in good condition. 1.375"12 X 8"L. Please email any questions or requests for additional pictures before purchasing. International buyers– please note: import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such practices.
|
|
|
Lempco Arbor Press
60 Ton Lempco Arbor press being sold as is. We no longer require this piece of equipment in our shop. Worked well when in use. Available for local pickup only. Contact for more details.
|
|
|
Bison End Mill Holder 7820-R8-3/4
Bison End Mill Holder 7820-R8-3/4 Good usable condition Comes as shown in photos. Please look carefully at the photos Will ship by USPS Priority Mail and cost $0.00. Powered by SixBit's eCommerce Solution
|
|
|
Bison End Mill Holder 7820-R8-5/8
Bison End Mill Holder 7820-R8-5/8 Very good condition Comes as shown in photos. Please look carefully at the photos Will ship by USPS Priority Mail and cost $0.00. Powered by SixBit's eCommerce Solution
|
|
|
Bison End Mill Holder 7820-R8-1/2
Bison End Mill Holder 7820-R8-1/2 Very good condition Comes as shown in photos. Please look carefully at the photos Will ship by USPS Priority Mail and cost $0.00. Powered by SixBit's eCommerce Solution.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-144ec9bcfa6-0x103-
|
|
|
Bison End Mill Holder 7820-R8-3/8"
Bison End Mill Holder 7820-R8-3/8" Very good condition Comes as shown in photos. Please look carefully at the photos Will ship by USPS Priority Mail and cost $0.00. Powered by SixBit's eCommerce Solution.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-144ec9bcfd5-0x104-
|
|
|
3-Arbors Grinding Turning Etc.
3-Arbors Grinding Turning Etc. These Arbors are Chuck-able Or can be used in Collets on lathes. Grinders Etc. 2-Steel& 1-Aluminum Steel– 1” Drive end x ½” arbor– 1” Drive end x 5/8” Arbor– Aluminum ¾”Drive end x ¾” Arbor. See Pic’s. Combine Wins& Save hipping $$$$$. Have FUN BIDDING& GOOD LUCK Save Shipping $$$ Combine Shipping Email me for Prices. Know your Savings. Check out my! Hi my name is David; WHERE APPLICABLE I will COMBINE SALES“Please E-Mail me& I will Hold your items until your done bidding” ANY INCREASE IN POSTAGE DUE TO WEIGHT INCREASE WILL APPLY PLUS A MINIMAL Handling CHARGE Per Item($1.00-$1.50) The more you combine the more you will save in Shipping Charges. Shipping Charges can be pre calculated upon request. ALL INTERNATIONAL BIDDERS PLEASE READ SELLERS PAYMENT INSTRUCTIONS. Insurance& ... moreTracking#s are at the buyers expense upon request. If you have any problems with any of my items Please email me so we can try to resolve problem outside of Ebay. Over the next few months I will be adding items daily. If you are looking for something particular contact me if I have it I will post it or possibly I can locate it. Item#G.S. 20-20
|
|
|
No.7 Jarno Taper Shell Mill Holder
No.7 Jarno Taper Shell Mill Holder*USABLE CONDITION* Illinois Tool Works 12 Pitch. Right Hand#T-28-336-2.05 RAKE LEAD- 39.4166 Please wait to be invoiced Buyer is responsible for all shipping costs NO INTERNATIONAL SALES
|
|
|
Jacobs Chuck Arbor No 4 JT to 3 MT 6" OAL
Jacobs Chuck Arbor No 4 JT to 3 MT 6" OAL Good usable condition nice and clean looks to be un-used. Comes as shown in photos. Please look carefully at the photos Will ship by USPS Priority Mail and cost $0.00. Powered by SixBit's eCommerce Solution
|
|
|
Morse Taper Adapter 4 MT to 4 MT 12" OAL
Morse Taper Adapter 4 MT to 4 MT 12" OAL Good usable condition some markings from previous owner. Comes as shown in photos. Please look carefully at the photos Will ship by USPS Priority Mail and cost $0.00. Powered by SixBit's eCommerce Solution;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-144ee023a15-0x121-
|
|
|
Morse Taper Adapter 4 MT to 3 MT 9-1/2" OAL
Morse Taper Adapter 4 MT to 3 MT 9-1/2" OAL Good usable condition some grinding on tang. Comes as shown in photos. Please look carefully at the photos Will ship by USPS Priority Mail and cost $0.00. Powered by SixBit's eCommerce Solution
|
|
|
Morse Taper Adapter 3/4 to 5 MT 7-1/4" OAL Center Drill Holder
Morse Taper Adapter 3/4 to 5 MT 7-1/4" OAL Center Drill Holder Good usable condition shows some use and markings. Comes as shown in photos. Please look carefully at the photos Will ship by USPS Priority Mail and cost $0.00. Powered by SixBit's eCommerce Solution
|
|
|
Morse Taper Adapter 3 MT to 5 MT 6" OAL
Morse Taper Adapter 3 MT to 5 MT 6" OAL Good usable condition shows some use hammer marks on front Comes as shown in photos. Please look carefully at the photos Will ship by USPS Priority Mail and cost $0.00. Powered by SixBit's eCommerce Solution
|
|
|
Morse Taper Adapter 2 MT to 5 MT 6" OAL
Morse Taper Adapter 2 MT to 5 MT 6" OAL Good usable condition nice and clean. Comes as shown in photos. Please look carefully at the photos Will ship by USPS Priority Mail and cost $0.00. Powered by SixBit's eCommerce Solution
|
|
|
Morse Taper Adapter 4 MT to 5 MT 6-3/4" OAL
Morse Taper Adapter 4 MT to 5 MT 6-3/4" OAL Good usable condition nice and clean shows some use on tang. Comes as shown in photos. Please look carefully at the photos Will ship by USPS Priority Mail and cost $0.00. Powered by SixBit's eCommerce Solution
|
|
|
Morse Taper Adapter 3 MT to 5 MT 10-1/2" OAL
Morse Taper Adapter 3 MT to 5 MT 10-1/2" OAL Good usable condition very clean shows little use. Comes as shown in photos. Please look carefully at the photos Will ship by USPS Priority Mail and cost $0.00. Powered by SixBit's eCommerce Solution
|
|
|
NMTB50 MICROBORE C12 COLLET HOLDER with new 1.5 Collet, Bearing,&washer
NMTB- KANTO Microbore Collet holder. Number T50U-BC12-E3 made in Japan by Kanto. Light rust and staining but the tapers are like new no rust on collet taper, this holder has a 4 in projection and has been sitting 30 years so selling in used condition. The 1.5 dia collet, bearing, and washer are in new condition. What you see is what you get. Last one.
|
|
|
Tool Holder Adapter Sleeve .750" ID x 1.50" OD
You are bidding on one adapter sleeve with a.750" ID x 1.50" OD x 3.75" long. It is used. However the ID and OD are smooth and usable. This was used for a boring bar in a CNC lathe. Please Note. I only ship to the lower 48 states.
|
|
|
Metal Lathe 5C Collet Adapter Closer 1.625" Straight Spindle Bore South Bend etc
For sale is a 5C Collet Adapter for metal lathes. Unsure of which models if fits so please verify the measurements before you buy it. The OD that slides into your spindle is 1.625" diameter. The OD is straight and only fits in a straight lathe bore. This is used. Shows some evidence of age but should work good. Overall length: 2.680"
|
|
|
Lathe Spindle Adapter #4 Morse Inner Victor Southbend Clausing
Lathe spindle adapter. Has a#4 morse taper inner. It is 3.615 long. 2.500 top of taper. 2.350 at bottom of taper. 2.165 is the dia of the short straight part after the taper. The straight part is roughly.465 long. All measured using calipers. Pretty sure this came off a Victor-1640E. Should fit other lathes. Thanks for looking. Posted with
|
|
|
Sunnen Rod Hone with Cap Cutter and Mandrels
One Sunnen Rod Hone with Cap Cutter and 2 Mandrels. Mandrel sizes are CR 2100. Does 2.100 to 2.300 and CR 2300, does 2.300 to 2.500. 110 electric. Used condition
|
|
|
TMS SIZE #2 DA180 COLLET TYPE THRU COOLANT TAP ADAPTER BILZ
TMS DA180 COLLET TAP ADAPTER SIZE#2. THRU COOLANT. ALSO WORKS WITH BILZ SYSTEM. Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal accepted. $7.50 for USPS Priority Mail shipping with tracking. Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-144f1f8c8c1-0x109-
|
|
|
Skulley & Jones Chuck #4 Morse Taper Quick Change Collet Holder
Skulley& Jones Chuck#4 Morse Taper Quick Change Collet Holder with 1 Collet for#3 Morse Taper Very Good Condition I do combine shipping where possible NU1-D9-R4 Positive feedback will be left for all transactions. If you have an issue with your purchase please allow us the chance to resolve it so we may earn your positive feedback.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-144f5208f00-0x10d-
|
|
|
NMTB50 MICROBORE C8 COLLET HOLDER with .75 dia Collet, Bearing, & washer used
NMTB KANTO Microbore Collet holder. Number T50U-BC8-E1 made in Japan by Kanto. Light rust and staining but the tapers are like new no rust on collet taper, this holder was never used and has been sitting 30 years so selling in used condition. The.75 dia collet, bearing, and washer are used but in very good condition. What you see is what you get.
|
|
|
Used Bench Top Dake X Arbor Press Single Leverage 1 Ton Capacity 3-1/2"
Manufacturer: Dake Condition: Used. Comes in non-original packaging. Item has scuffs and scratches from previous use. Paint is fading. And also has some minor surface rust. I rotated the lever and it works fine. No further testing was done. Included: 1) Dake X Press, Specifications: Manufacturer: Dake, Model: X, Capacity(Tons) 1, Ram Size: 1" x 1" x 7-1/2" Throat: 3" x 3-1/2" RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-144f6403ca9-0x108-
|
|
|
4 to 5 MORSE TAPER ADAPTER SLEEVE tool holder drill arbor 4 - 5 MT CTD USA
Good Used Adapter Sleeve CTD USA 4 to 5 Morse Taper Approx. 6 7/8" Long Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-144fc75f245-0xfe-
|
|
|
Riten Bull Nose Live Center 8-1/2 to 2" Dia. 5 MT 14" OAL
Riten Bull Nose Live Center 8-1/2 to 2" Dia. 5 MT 14" OAL Good useable condition Comes as shown in photos. Please look carefully at the photos. Will ship by UPS Ground and cost $0.00. Powered by SixBit's eCommerce Solution 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-144fcf90bf6-0x108-
|
|
|
Lathe Dog Drive Face Plate D1-6 Mount 8-1/2 dia. 1" Slots with Dead Center
Lathe Dog Drive Face Plate D1-6 Mount 8-1/2 dia. 1" Slots with Dead Center Good useable condition dead center is removeable Comes as shown in photos. Please look carefully at the photos. Will ship by USPS Priority Mail and cost $0.00. Powered by SixBit's eCommerce Solution
|
|
|
Famco 0 Arbor Press 1" Maximum opening. Good functioning condition
For Sale: Famco type 0 arbor press. Has a maximum of 1" opening Overall good general condition and functionality. Please take a close look at the pictures and feel free to contact us with any questions. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $10.00 handling fee on large items and items that require special consideration to prepare for shipping. An 8% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of ... morethe auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any question
|
|
|
Jacobs Chuck Adapter, 3 Morse taper to 6 Jacobs taper, made in England
Jacobs Chuck Adapter. 3 Morse taper to 6 Jacobs taper, 3 MT to 6 JT, MFG Jacobs in England
|
|
|
Jacobs Chuck Adapter, 4 Morse taper to 6 Jacobs taper, Jacobs part A0406
Jacobs Chuck Adapter. 4 Morse taper to 6 Jacobs taper, Jacobs part A0406, 4 MT to 6 JT, MFG Jacobs
|
|
|
1 Inch DIAMETER ARBOR w/ MT4 SHANK
Up for sale is a" 1 Inch DIAMETER ARBOR w/ MT4 SHANK" in as found but excellent condition. Measures 1" in diameter x approx. 2" diameter length with an MT4 SHANK, maybe someone can use it-not sure of the maker-has name etched, company closure, clean useful used tool!as shown in pictures) NOTE: once the item is paid/ shipped, all of the LABEL/ TRACKING information will always be under PURCHASES in your my eBay with the item you purchased also eBay will send a message to your email address stating your item is shipped. Please take a minute to look at our other items! NO INTERNATIONAL SHIPMENTS! NO PICKUPS OR DELIVERIES! We also sell used tools, some may need recalibrating, some may or may not have etchings, repainting on them from the previous owners, if something isn't in our description or pictured, you can assume ... moreit is not included! Method of payments: PAYPAL. Massachusetts residents pay 6.250% sales tax. Good Luck& Happy Buying! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NO.3 TO NO.2 x 16" MORSE TAPER EXTENSION ADAPTER #3MT x #2MT
MORSE TAPER EXTENSION ADAPTER NO.3 MORSE TAPER SHANK. NO.2 MORSE INTERNAL TAPER. 16" OVERALL LENGTH. Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. Thanks for looking!
|
|
|
Scully & Jones Chuck #4 Morse Taper Quick Change Collet Holder
Scully& Jones Chuck#4 Morse Taper Quick Change Collet Holder with 1 Collet for#3 Morse Taper Very Good Condition I do combine shipping where possible NU1-D9-R4 Positive feedback will be left for all transactions. If you have an issue with your purchase please allow us the chance to resolve it so we may earn your positive feedback
|
|
|
Graflex 5/8" Q C End Mill Holder, M5840 36062, Used, WARRANTY
Title: Graflex 5/8" Q C End Mill Holder. M5840 36062, Used Description: Our Internal Stock# L4- 3-26-14 dale) You are about to purchase the following item: 1- Graflex 5/8" Q C End Mill Holder. M5840 36062, Used Catalog# M5840 36062 5/8" End Mill Holder Quick Change Adapter was mounted on: GRAFLEX EM2502 401 3660 CAT 40 ADAPTER This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition. Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on ... morebuyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when s
|
|
|
Lathe Dead Center Carbide Tipped 5 MT 8" OAL
Lathe Dead Center Carbide Tipped 5 MT 8" OAL Good useable condition Comes as shown in photos. Please look carefully at the photos. Will ship by USPS Priority Mail and cost $0.00. Powered by SixBit's eCommerce Solution
|
|
|
Lathe Dead Center Carbide Tipped 4 MT 5-1/2" OAL
Lathe Dead Center Carbide Tipped 4 MT 5-1/2" OAL Good useable condition Comes as shown in photos. Please look carefully at the photos. Will ship by USPS Priority Mail and cost $0.00. Powered by SixBit's eCommerce Solution
|
|