|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$8.00 Shipping Condition: Used Location: Grand Rapids, United States What is seen in the pictures is what you will receive. Each Item we list has been inspected under magnification to ensure condition is as referenced.
$10.75 Shipping Condition: Used Location: Ellington, United States Indexable Face Mill. SHANK IS WELDED TO FACE MILL. SEE PHOTOS.
$12.00 Shipping Condition: Used Location: El Monte, United States
$6.09 Shipping Condition: Used Location: Beloit, United States USED Items- Re-Conditioned Sandvik Indexable Endmill 2 pcs. RA390-025M25-11M Cutter is used and has been re-conditioned back to running form. Tool still ... morehas a lot of life left in it. Does not have the Sandvik screws 5513-02-35(3 pcs needed) Method of payment is Paypal only. Buyer to pay shipping cost of $6.50 for US Priority Mail with delivery confirmation. IMPORTANT: READ BEFORE BIDDING: 0 feedback. Low feedback and negative feedback bidders must contact me before bidding, or your bid will be canceled. Winning bidder must contact me within 24 hours of the end of the auction to let me know how payment will be made Payment must be made in full within 5 days of the end of the auction or the item will be relisted and appropriate feedback left Paypal payment account must be confirmed. No unconfirmed Paypal accounts Money Back if not satisfied- Terms are item must be returned undamged. Un-used, and in original condition. Shipping Insurance is offered and recommended but not mandatory. By bidding in this auction. You have agreed to these terms. No exceptions. Parameter, Value, Weight, 0.9524, Zc, 3, Zn, 3, Dc, 1, dmm, 1, l1, 2.61, l2, 3.75, l3, 1.25, Lambda_s, 17.06, ap_max, 0.394, Max_rpm, 36100, Insert_Size, 11, Kappa_r, 0,
Buy It Now
Free Shipping Condition: New Location: Monrovia, United States End Mill APKT Insert 1" x 1" 90 Degree Square Shoulder Indexable 4 Flutes. Shank: 1". Insert Size: APKT11T308. Depth Of Cut: 0.433".
Buy It Now
$5.45 Shipping Condition: New Location: East Meadow, United States
Buy It Now
$14.70 Shipping Condition: New Location: Saint Charles, United States EXTERNAL INDEXABLE THREADING TOOLHOLDER WITH ACOATING INSERT INCLUDED. GROOVING AND TURNING INSERT. CUT OFF AND GROOVING WITH A PVD COATING INSERT INCLUDED. ... more7 pcs indexable turing tool holder. TURNING TOOLHOLDER CATEGORYTurning Sets.
Buy It Now
$5.40 Shipping Condition: New Location: Muskegon, United States Shim for Indexables: 1/2" Inscribed Circle, Milling. 0.6555" Thick, WGCS Shim, Right Hand Cut. MSC # 05254685. Mfr # 2G52141.
Buy It Now
$9.95 Shipping Condition: Used Location: Garden Grove, United States The following item is up for SALE - 1 - KENNAMETAL SCLCRF-083D 1/2" x 1/2" x 4 1/2" Indexable Lathe Tool Holder LOT # 71.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Key Features: Carbide Indexable Turning Tool 1/2" 7 pc Lathe Tool Bit Set Thread Insert+Holder. 1/2" shank, 7-piece turning tool set is ideal for a wide ... morevariety of projects. Supplied with right hand and left hand turning/facing tool holders and one threading and cut-off tool. Indexable inserts ensure cutting surfaces stay sharp. 1/2" Shank. Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action. Wrenches included. Fitted case included. Holders have black oxided smooth finish and marked with tool holder style and shank size. Holders/Inserts included:.
Buy It Now
Free Shipping Condition: New Location: New York, United States Wrench: T8. 1 SCLCR 1010H06 turning tool holder. 1 S10K-SCLCR06 turning tool holder. 2 T8 wrench. Tool holder model: SCLCR 1010H06. Tool holder model: ... moreS10K-SCLCR06. Insert Color: Gold. Insert Model: CCMT060204 (CCMT 21.51).
$12.00 Shipping Condition: Used Location: El Monte, United States
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States SHARS 1PC Internal V Partial Profile IR16 AG60 424-1432. THREADING HOLDER CATEGORY Internal Boring Bars. MODEL STYLE - THREADING HOLDER SIR-0500-P16-1/2. ... moreFree 1 PC Tin Coat Insert. center to insert cutting edge f 0.39.
Buy It Now
$8.00 Shipping Condition: Used Location: Grand Rapids, United States Holder is Used.
Buy It Now
$8.00 Shipping Condition: Used Location: Grand Rapids, United States Holder is Used. Each Item we list has been inspected under magnification to ensure condition is as referenced.
Buy It Now
Free Shipping Condition: Used Location: Grand Rapids, United States Holder is Used.
Buy It Now
$6.70 Shipping Condition: New Location: Saint Charles, United States INSERT STYLE TCMT. Positive 60 degree triangle TCMT inserts. INSERT SIZE 21.51, 21.52. Easy reference guide for insert number, screw, and other accessories ... moreis printed on the tool shank. SIDE CUTTING ANGLE-5.
Buy It Now
Free Shipping Condition: Used Location: Topeka, United States
Buy It Now
$11.17 Shipping Condition: New – Open box Location: Venice, United States Indexable Insert Drill. 9/16" Diam. 3/4" Shank Diam. 1.7" Max Drill Depth. Drill Style DR. This item appears to be new and in good condition. SOLD AS ... moreIS. April 16 2024.
Buy It Now
$2.99 Shipping Condition: New Location: China Cutting edge angle: 95°. Cutting direction: right hand. Square handle (W L): 12 9mm. 1 S12M-SCLCR09 turning tool holder. The real color of the item may ... morebe slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Buy It Now
Free Shipping Condition: New Location: Troy, United States THIS CUTTER ONLY CUTS ON ONE SIDE SEE PICTURES. DURING THE WORK WEEK.
$4.19 Shipping Condition: New – Open box Location: Hubbard, United States Enhance the performance of your CNC machines by using the KOMET KUB V95 10063.0089 indexable insert from the world-renowned brand KOMET. Perfectly designed ... morefor workholding and toolholding purposes, this high-quality insert guarantees exceptional results in your metalworking and manufacturing operations. With cutting-edge technology, this new-open box item is a must-have for any professional who desires to achieve precision and accuracy in their work. Add the KOMET KUB V95 10063.0089 to your collection and take your CNC machining to the next level.
Buy It Now
Free Shipping Condition: New Location: San Diego, United States Model: DCMT11T304. Quantity: 10PCS. Insert Type: Turning Insert.
Buy It Now
$5.20 Shipping Condition: Used Location: Coloma, United States DCMT STYLE.
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States Model# TDJN R-16-4D. Accepts DNMG insert. Negative rake. Hex Wrench: S3. Locating lug on the back of the clamp matches with the slot on the tool body ... moreto guide the clamp to be seated repetitively which would improve clamping accuracy.
Buy It Now
$6.70 Shipping Condition: New Location: Saint Charles, United States SHARS 3/8 x 6" SCLCR INDEXABLE BORING BAR HOLDER + CCMT INSERT + CERTIFICATE NEW. INSERT STYLE CCGX, CCMT. Positive 80 degree diamond CCMT inserts. MODEL ... moreSTYLE - BORING BAR S-SCLCR6-2. INSERT SIZE 21.51, 21.52.
Buy It Now
Free Shipping Condition: New Location: Monrovia, United States Shoulder Indexable End Mill APKT1003 Inserts 3 PC 1/2" Shank 90 Degree. Insert Size: APKT1003.
$10.25 Shipping Condition: New – Open box Location: Ellington, United States Ceratip #TNMP-434. Ceramic Indexable Inserts.
Buy It Now
$8.50 Shipping Condition: Used Location: Grand Rapids, United States Holder is Used.
Buy It Now
$8.00 Shipping Condition: Used Location: Grand Rapids, United States Holder is used.
Buy It Now
$8.51 Shipping Condition: Used Location: Grand Rapids, United States Holder is Used.
Buy It Now
$8.00 Shipping Condition: Used Location: Grand Rapids, United States Holder is Used.
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States TURNING TOOLHOLDER CATEGORYTurning Toolholders. For turning, facing and copying. 3 degree side cutting edge angle. MODEL STYLE - TOOL HOLDERMDJN R-16-4D. ... moreEasy reference guide for insert number, screw, and other accessories is printed on the tool shank.
Buy It Now
Free Shipping Condition: New Location: China Large inventory and spot sales.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States VEVOR Self-Centering Lathe Chuck K12-160 4 Jaw 6" Cast Iron Jaw Milling Machine. Sharp,straight and even ccmt inserts can ensure high precision cutting. ... moreIndexable &Sharp Inserts. High precision and stable cutting can be achieved through lathe tooling's sharp, flexible inserts and high toughness body.
Buy It Now
Free Shipping Condition: New Location: Rosemead, United States Insert Size Depth Of Cut APMT 22 (APMT 1003). M2.5 x 6.5.
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States Shars 3/8 RH Internal Indexable Threading Boring Bar IR11 Insert Certificate New. SHARS Internal V Partial Profile IR11 404-2228. THREADING HOLDER CATEGORY ... moreInternal Boring Bars. MODEL STYLE - THREADING HOLDER SIR-0375-H11.
Buy It Now
$7.75 Shipping Condition: New Location: Huntington Beach, United States | | | | | | | Our part# ALL-19900, Made of precision ground. High grade tool steel. Set contains(4) 1/2" diameter(round shank) boring bars: 1 pc- ... more1/2" diameter boring bar x 7/16" minimum bore x 1-1/4" bore depth x 2-3/4" overall, 1 pc- 1/2" diameter boring bar x 7/16" minimum bore x 2-1/8" bore depth x 3-5/8" overall, 1 pc- 1/2" diameter boring bar x 1/2" minimum bore x 1-1/2" bore depth x 3" overall, 1 pc- 1/2" diameter boring bar x 1/2" minimum bore x 2-1/2" bore depth x 4" overall, TCMT 21.51 Carbide inserts included. Replacement inserts are in our store(see link below) Positive rake 90° lead. Supplied with wrench, Great deals on more boring bars. Inserts, and more lathe/mill tooling in the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships from USA- same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote New machine or tooling up for a big job? Contact us for best pricing guarantee! 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will be shipped within 1-2 business days after full payment is received(same day if possible) For international
Buy It Now
$8.00 Shipping Condition: Used Location: Grand Rapids, United States What is seen in the pictures is what you will receive. Each Item we list has been inspected under magnification to ensure condition is as referenced.
Buy It Now
$8.50 Shipping Condition: Used Location: Grand Rapids, United States Holder is Used.
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States Shars 1 x 1/2" Shank 60° Indexable 3FL Dovetail Cutter w/Certificate New. MAX DEPTH OF CUT - DOVETAIL CUTTER 0.325. A 90 degree slot must first be cut ... moreinto the material allowing clearance for the dovetail neck during the final cut.
Buy It Now
Free Shipping Condition: New – Open box Location: Grand Rapids, United States 1/4" thick.
Buy It Now
Free Shipping Condition: New Location: Chino, United States End Mill Holder Roughing End Mill Indexable End Mill 2 Flute 10mm JDMT070204R For milling process, small milling cutter, replaceable inserts, economical. ... moreMilling cutter blade:Made of Japanese Hitachi carbide with surface coating treatment. Can process carbon steel, stainless steel, cast iron. Items include 10-C10-120L-2T 1PCS JP4020 JDMT070204R 10PCS.
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States Model# MCLN R-16-5D. Negative rake. For Contouring, Turning & Facing. Finger clamp #: CL-30. Accepts these 80 degree inserts: CNMA, CNMG, CNMM, CNMP. ... moreNegative 5 degree cutting edge angle. Insert Style: CNMA, CNMG, CNMM, CNMP.
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States INSERT STYLE TNG, TNMA, TNMG, TNMM, TNMP, TNMX, TNMZ, TNU. TURNING TOOLHOLDER CATEGORY Turning Toolholders. For Turning, Facing or Chamfering. MODEL STYLE ... more- TOOL HOLDER MTENN-12-3B. 30 degree cutting edge angle.
Buy It Now
$6.70 Shipping Condition: New Location: Tulsa, United States Qty. 10 Newcomer SPG-631 Grade N60 Carbide CNC Indexable Carbide Inserts. Condition is "New from surplus stock". Please visit our store. We combine shipping ... morewhen possible.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: Mini Turning Tool holders with 1/2'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts Multiple cutting surfaces ... moreavailable provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion. 5pcs in a wooden case for safe storage,Carbide inserts .
Buy It Now
Free Shipping Condition: Used Location: Plantsville, United States
Buy It Now
Free Shipping Condition: New Location: Dickinson, United States This concept makes it possible for us to provide high quality at highly competitive prices. High performance at a bargain price.
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States Shars 1" RH Internal Indexable Threading Boring Bar IR16 Insert Certificate New. SHARS 1PC Internal V Partial Profile IR16 AG60 424-1432. THREADING HOLDER ... moreCATEGORY Internal Boring Bars. MODEL STYLE - THREADING HOLDER SIR-1000-R16.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Lathe Internal Threading Boring Bar Carbide Insert Threading Double-Sided 6Flute For lathe internal thread tools. Angle is 60 degrees, pitch is 1.75-3.0 ... moreThe toolholder is made of spring steel heat treatment, which is shock resistant and durable. not easily deformed. Matched with 20mmX20mm, square tool holder. Easy to clamping and installation. The insert is made of German carbide. Surface coating treatment, 6 cutting edges Improves thread processing efficiency. Cost saving. Inserts can machine steel, stainless steel, nickel alloy, titanium alloy. Item includes SUR0012M16U 1pcs Tnmg160402-G60 10pcs 20X20-12 1PCS.
Buy It Now
$14.70 Shipping Condition: New Location: Saint Charles, United States INDEXABLE MILLING CATEGORYFace & Shoulder Mill. Higher feed rate than conventional 90 degree face mill. Insert pockets are precisely machined to provide ... morea tight fit with the insert and also maintain a close tolerance.
Buy It Now
$12.00 Shipping Condition: Used Location: Buffalo, United States This Kaiser Tool Co. Thinbit 3/8\" RH Tool Holder Grooving Insert comes with 3-3/4\" OAL W/ BITS. The brand is Kaiser and the insert material is HSS. ... moreThis indexable insert is perfect for CNC, metalworking and manufacturing, and workholding and toolholding. It was made in the United States and the insert type is 3/8 RH SMALL BIT GROOVING TOOL. Get your hands on this high-quality tool holder and make your work easier. INCLUDES 7 EXTRA BITS. INCLUDES THE INSERT SCREW WRENCH. THE INSERT SCREW WAS TESTED AND IS IN EXCELLENT WORKING ORDER
Buy It Now
$17.80 Shipping Condition: New Location: Saint Charles, United States 3MM /. 118" GROOVING AND TURNING INSERT (P/N 424-3051). Cut off and grooving with a 3mm / 0.118" width PVD coating insert included. External threading. ... more7 pcs indexable turing tool holder. TURNING TOOLHOLDER CATEGORY Turning Sets.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States This indexable turning tool set includes 7pcs turning tool holders&inserts in different models, providing you with a professional tool for high-precision ... morecutting action. The precise angles, smooth lines, and sharp inserts assist you to achieve accurate&smooth cutting and high work efficiency.
Buy It Now
Free Shipping Condition: New Location: Cranbury, United States 5 x Indexable Insert Lathe Tool. Inserts can be rotated to a new cutting edge without changing the position of the tool holder (each has three sides). ... more1/2" shanks. 1 x Wrench. Shank Width: 1/2". Shank Length: 3".
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States Shars 3/8 LH Internal Indexable Threading Boring Bar ER11 Insert Certificate. SHARS External V Partial Profile ER11 404-1083. THREADING HOLDER CATEGORY ... moreInternal Boring Bars. MODEL STYLE - THREADING HOLDER SIL-0375-H11.
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States 1/2" X 3-1/2" RH CTAP INDEXABLE TURNING TOOL HOLDER TPG NEW 404-1509. Model# CTAP R-08-2J, Shank Size Square: 1/2" Overall Length: 3-1/2" ... moreInsert I.C: 1/4" T: 1/8" Finger clamp# CL-6, Locking pins# XNS-0517 Insert not included For Turning or Facing to shoulder. Positive Rake, 0 degree cutting edge angle, Accept TPG. TPU, TPMR inserts Insert not included: We also offer high performance carbide inserts: TPGN 222 YBC151 w/ Finishing chip breaker(PART#424-1800 $3.60) Insert Grade: YBC151, Material: Carbide, Coating: CVD Tin Al2O3 TICN, Machining Parts Material: Steel Alloy, Machining Process: semi-finish/medium, Material Group Material Type Examples ISO Code Cutting Application Steels& Alloy. Alloy steels. Tool and die steels, ferritic/martensitic steels. 1020. 1050, 4140, 4340, 8620, P20 P10- P35, semi-finish/M, YBC151 Coating Grade. Surface with Tin coating to reduce friction and easily identify worn out spot, Special structure Al2O3 layer forming a thermal barrier to protect insert from Anti-plastic deformation during high speed dry cutting, TiCN layer has high wear resistance characteristic, Carbide substrate with excellent wear resistance, YBC151 consist of good wear resistance carbide substrate with optimal layers of MT-TiCN. Thick layer of Al2O3, Tin Coating. It's suitable for finish to semi-finish on alloy steel and tool steel. All Available to Ship NOW! at Fixed Prices Email: DISCOUNTMACHINE@AOL.COM SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via USPS. Canada will pay actual shipping costs plus duty fees via USPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. PAYMENT: We accept VISA. MasterCard and E-C
Buy It Now
Free Shipping Condition: New Location: Chino, United States For external thread turning tools, 60 degree thread turning tool. This threaded insert is a vertical 60 degree insert. It is used for external threads ... morefrom 0.5 mm to 3.0 mm pitch. Shank size 20mm wide, 20mm high Material is carbide. Surface is coated. Can be used on steel and stainless steel. Item includes SER2020K16-V 1PCS 16VERAG60 10PCS.
Buy It Now
Free Shipping Condition: New Location: Melville, United States Sandvik Coromant 5765032 Clamp-on Scraper (only) for Indexable Inserts (Inserts are not Included). ISO: 620-25 H10; Material Id: 5765032; EAN: 10314356; ... moreANSI: 620-25 H10; Priced and sold as each (1).
|
|
|
|
R8 Indexable End Mill
Ok I'm not a machinist best I got this is a R8 indexable End mill there are also 9 inserts for it as shown in pic the box is shown I took out inserts to show in pic.Please ask before bidding ill try to help with what is written on box or tool for u Happy bidding! Posted with
|
|
|
K-Tool HS-345 Indexable Carbide Shell Mill 1" Arbor Hole 3" OD 45 deg Chamfer
Welcome! Up for sale is a K-Tool HS-345 Indexable Carbide Shell Mill 1" Arbor Hole 3" OD 45 deg Chamfer. 1 insert and 3 screws are installedthe insert is used and chipped in 1 corner. The 2 empty screw holes are clear. No broken off screws. Feel free to email any questions! SCT2000
|
|
|
1-1/4" INDEXABLE END MILL COOLANT USES CARBIDE INSERTS
DEVLIGE TOOL HOLDER TP 43 GREAT CONDITION BUYING MULTIPLE ITEMS? BE SURE TO REQUEST A COMBINED SHIPPING INVOICE FROM US BEFORE YOU PAY. IF YOU LIVE IN THE STATE OF OHIO WE ALL HAVE TO PAY SALES TAX. THIS IS AN AUCTION PLEASE READ BEFORE YOU BUY. A $10.00USD HANDLING FEE WILL BE ACCESSED TO ALL SHIPMENTS BEING SENT OUT OF THE UNITED STATES* FEEL FREE TO CALL 1-440-951-2138 IF YOU NEED TO SPEAK TO A SALES PERSON. WE ARE OPEN MONDAY THROUGH FRIDAY 8:30 TO 5:00 EST. WE WILL CONTACT YOU ON SHIPPING CHARGES WHEN AUCTION IS OVER. 1) Returns accepted on new items only with prior approval. No returns are accepted on used or surplus items. PLEASE NOTE. THERE IS AN ADDITIONAL $10.00 OUT OF COUNTRY HANDLING FEE* CALL FOR A PRICE 1-800-321-3566. On Jan-28-10 at 15:46:22 PST. Seller added the following information: BUYING MULTIPLE ITEMS? BE SURE TO REQUEST ... moreA COMBINED SHIPPING INVOICE FROM US BEFORE YOU PAY. How to Request an Invoice so shipping is correct and up to date. 1. Click Commit to Buy 2. DO NOT CLICK PAY NOW 3. Go to Ebay Summary. Under PURCHASES 4. Select More Actions 5. Select Request Total
|
|
|
3" dia. 6 insert face mill fly cut milling indexable carbide R8 bridgeport
3" dia. 6 carbide bit surface mill surfacing milling 1" shank 6 1/2" long. I inherited this and have no idea what it is for or any specs sorry. Looks like it is in great shape. I would appreciate it if you know more about this correct me if I am misrepresenting this item
|
|
|
SECO Micro Turbo 5/8" Indexable Milling Cutter (R217.69-00.62-3-09A)
SECO Micro Turbo Coolant Fed Cutter(R217.69-00.62-3-09A) Mill Diameter: 0.625" Shank Diameter: 0.625" Neck Length: 1.09" Overall Length: 3.25" Number of Flutes: 2 Compatible Insert: XOMX 090308 Max RPM: 40.600 Made in USA This item is in good condition and comes as shown. Will ship out one day after receipt of payment.
|
|
|
Crown Molding Cutting Blades Moulding Cutter Knives Indexable Corrugated Knives
Unfortunately I don't know what brand these vintage woodworking knives are. I have listed them as used though I can only see one that looks like its actually been used They all show signs of age from light corrosion and are sold as is. It's not overwhelming-they remain very sharp, in overall good shape and I believe fully functional. Each type of cutter was found in their original boxes inside a home-there are three of each type in each box. Except for one set that has only two.32 total cutters) Each measures an 1/8 inch thick by 1 inch wide- lengths vary according to type/shape. Feel free to ask questions or add info about these cutters. Thanks for your interest and good luck! this is confusing but- in the last picture there is one blade on the far right. That's the only one that appears to have seen any use- next to that-to ... morethe left there are two blades with a triple dip pattern, these are the one's that are missing the third blade)
|
|
|
Ingersoll 1251Q1080R01 1" D Shank 4" L Indexable End Mill Damaged Tip
Up for AUCTION is the following item 1- Ingersol 1251Q1080R01 1" Diameter 4" Long End Mill Indexable. In very good working order unless otherwise noted. Please check my STORE for other listing I am currently selling over 200 Machinist Tools. We will ship for discounted freight rates on multiple item winners. Please email any question before bidding if you have them I will respond ASAP! ALL International Packages MUST ship PRIORITY MAIL INSURED no exceptions. Powered by
|
|
|
CAT 40 BORING HEAD DUAL INDEXABLE CUTTERS SANDVIK 1.5" HOLDER
CAT 40 BORING HEAD DUAL INDEXABLE CUTTERS SANDVIK 1.5" HOLDER. Custom made for a short run job. This came from a small shop who's owner retired. This will ship USPS flat rate priority at $11.35. No Reserve Auction. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13e04c91480-0xf6-
|
|
|
Aloris CA-77-I Indexable Carbide Cut Off Holder
Up for auction is an Aloris CA-77-1 Indexable Carbide Cut Off Holder. The item has been used and is in good condition. There is a slight amount of surface rust(visible in pictures) But the holder still works as it should. HEIGHT 2-1/2" TYPE Cut-Off and Grooving Holder, APPLICATION High rigidity under heavy duty conditions. Chatter free operations, MOUNT TYPE CA, The holder will ship via USPS Priority Mail with delivery confirmation. International shipping will cost extra.
|
|
|
SANDVIK 1 1/4" INDEXABLE ENDMILL RA390 032M32 17M R390 1704 (443) TS4
I ship 6 days a week. I offer money back quarantees. I will always combine shipping. I also have large quantities of lathe tool holders. Boring bars, and face mills. Please email if interersted. INTERNATINAL SHIPPING PRICE VARIES. Powered by The free listing tool. List your items fast and easy and manage your active items. On Apr-12-13 at 17:13:32 PDT. Seller added the following information:
|
|
|
3/4" KENNAMETAL HERTEL INDEXABLE END MILL APKT
HERTEL INDEXABLE END MILL PART NO. HM0099401A 3/4" WELDON SHANK. USES 2 AP. STYLE INSERTS Good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, credit card, and PayPal accepted. FREE USPS Priority Mail shipping with delivery confirmation* STOCK#EM604 Thanks for looking!
|
|
|
1-1/2" X 1" SH INDEXABLE END MILL USES CARBIDE INSERTS USED VERY GOOD CONDITION
1-1/2" X 1" SH INDEXABLE END MILL USES CARBIDE INSERTS USED VERY GOOD CONDITION BUYING MULTIPLE ITEMS? BE SURE TO REQUEST A COMBINED SHIPPING INVOICE FROM US BEFORE YOU PAY. IF YOU LIVE IN THE STATE OF OHIO WE ALL HAVE TO PAY SALES TAX. THIS IS AN AUCTION PLEASE READ BEFORE YOU BUY. A $10.00USD HANDLING FEE WILL BE ACCESSED TO ALL SHIPMENTS BEING SENT OUT OF THE UNITED STATES* FEEL FREE TO CALL 1-440-951-2138 IF YOU NEED TO SPEAK TO A SALES PERSON. WE ARE OPEN MONDAY THROUGH FRIDAY 8:30 TO 5:00 EST. WE WILL CONTACT YOU ON SHIPPING CHARGES WHEN AUCTION IS OVER. 1) Returns accepted on new items only with prior approval. No returns are accepted on used or surplus items. PLEASE NOTE. THERE IS AN ADDITIONAL $10.00 OUT OF COUNTRY HANDLING FEE* CALL FOR A PRICE 1-800-321-3566. On Jan-28-10 at 15:46:22 PST. Seller added the following information: ... moreBUYING MULTIPLE ITEMS? BE SURE TO REQUEST A COMBINED SHIPPING INVOICE FROM US BEFORE YOU PAY. How to Request an Invoice so shipping is correct and up to date. 1. Click Commit to Buy 2. DO NOT CLICK PAY NOW 3. Go to Ebay Summary. Under PURCHASES 4. Select More Actions 5. Select Request Total
|
|
|
3" INDEXABLE MILLING CUTTER USES CARBIDE INSERTS USED VERY GOOD CONDITION
3" INDEXABLE MILLING CUTTER USES CARBIDE INSERTS USED VERY GOOD CONDITION BUYING MULTIPLE ITEMS? BE SURE TO REQUEST A COMBINED SHIPPING INVOICE FROM US BEFORE YOU PAY. IF YOU LIVE IN THE STATE OF OHIO WE ALL HAVE TO PAY SALES TAX. THIS IS AN AUCTION PLEASE READ BEFORE YOU BUY. A $10.00USD HANDLING FEE WILL BE ACCESSED TO ALL SHIPMENTS BEING SENT OUT OF THE UNITED STATES* FEEL FREE TO CALL 1-440-951-2138 IF YOU NEED TO SPEAK TO A SALES PERSON. WE ARE OPEN MONDAY THROUGH FRIDAY 8:30 TO 5:00 EST. WE WILL CONTACT YOU ON SHIPPING CHARGES WHEN AUCTION IS OVER. 1) Returns accepted on new items only with prior approval. No returns are accepted on used or surplus items. PLEASE NOTE. THERE IS AN ADDITIONAL $10.00 OUT OF COUNTRY HANDLING FEE* CALL FOR A PRICE 1-800-321-3566. On Jan-28-10 at 15:46:22 PST. Seller added the following information: ... moreBUYING MULTIPLE ITEMS? BE SURE TO REQUEST A COMBINED SHIPPING INVOICE FROM US BEFORE YOU PAY. How to Request an Invoice so shipping is correct and up to date. 1. Click Commit to Buy 2. DO NOT CLICK PAY NOW 3. Go to Ebay Summary. Under PURCHASES 4. Select More Actions 5. Select Request Total g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13e04f1bd83-0xf4-
|
|
|
RA390 025M25-11M SANDVIK INDEXABLE Sq Shoulder Mill 90Deg
RA390 025M25-11M SANDVIK INDEXABLE Sq Shoulder Mill 90Deg Lightly used tool see pictures Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SHARS 2" 75˚ R8 INDEXABLE FACE MILL HOLDER 3 INSERTS R8 NEW
SHARS 2" 75˚ R8 INDEXABLE FACE MILL HOLDER 3 INSERTS R8 NEW Product Code 404-694 0 Product description Shank Style: R8 Size: 2" Include s 3 FREE inserts Product features Positive rake 15 degree lead angle 3 flute For more Replacement Inserts: SPG 434 C2 Order# 424-0024 $3.00/pc; SPG 434 C6 404-6951 Order# 404-6951 $3.00/pc; SPG 434 TiN Coated Order# 424-0025 $ 3.85/pc If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone: 1-630-443-3244 Email: DISCOUNTMACHINE@AOL.COM SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via USPS. Canada will pay actual shipping costs plus duty fees via ... moreUSPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shippment will be made the same day as your payment is received and an UPS tracking number will be email to you. PAYMENT: We accept VISA. MasterCard and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools. Feel free to email us at our eBay Message Box.
|
|
|
Boring Bars ,Drilling-Indexable inserts Carbide,Toolholders, Collets, Iscar Kit
In this auction ad I will be listing a of Metal/ tooling/ working instruments. OK look here I dont know much about whats in the pictures Im sure this can be handy to some one who knows what it is and how to use it. Im just selling it as a lot. Be sure you know what it is before bidding can not tell you much about it. attention. International Bidders please contact prior to bidding for a shipping quote. Please provide Postal Code. Thank you.
|
|
|
VALENITE 5" ECONOMIZER INDEXABLE FACEMILL w/ CAT40 SHANK + INSERTS
aims VALENITE 5" ECONOMIZER INDEXABLE FACEMILL w/ CAT40 SHANK + INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in U.S.A. by Valenite Model# STE90-489-4.5R4-150F This is an Indexable Facemill in Good condition. Specifications: Shank: Erickson B-123420 CAT40. 5" Cutting Diameter. 2 1/2" Head Length. 4 Indexable Stations. 4-3/4" Projection. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. VALENITE 5" ECONOMIZER INDEXABLE FACEMILL w/ CAT40 SHANK + INSERTS VALENITE 5" ECONOMIZER INDEXABLE ... moreFACEMILL w/ CAT40 SHANK + INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
SUMITOMO INDEXABLE FACEMILL W/ CAT40 SHANK - 4-1/2" DIA.
aims SUMITOMO INDEXABLE FACEMILL W/ CAT40 SHANK- 4-1/2" DIA. read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is an Indexable Facemill in good condition. Model# APG404R 606. Specifications: Cutting Diameter: 4-1/2" Shank: CAT40. Head Length: 2-1/2" Indexable Stations: 5. Projection: 4-3/4" Overall Length: 8-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SUMITOMO INDEXABLE FACEMILL W/ CAT40 SHANK- 4-1/2" DIA. SUMITOMO INDEXABLE FACEMILL W/ CAT40 SHANK- 4-1/2" DIA. Reliable Tool Inc. ... morec 2011 | Powered by
|
|
|
Shell Face Milling Cutter - Indexable Carbide - 4 Flute - 3"
Milling Cutter- Indexable Carbide- 4 Flute- 3" You're bidding on a 3" diameter face milling cutter! I bought it and used it very little. It has a slight amount of lead angle and a slight amout of negative rake. The mounting hole is 1"and has 2 driving slots. The inserts are worn on the current corner. But the other 3 are new. Not sure of the insert designation, but it looks common. No Reserve Price or Handling Charge! Bid With Confidence! Please check my feedbacks! Powered by The free listing tool. List your items fast and easy and manage your active items. f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13e0820051b-0xe9-
|
|
|
Lot of 2, Kyocera Ceratip MTP90-150-75W Indexable End Mills
Up for auction is a lot of 2 Kyocera Ceratip MTP90-150-75W Indexable End Mills. These end mills have been used. But are in great shape with lots of life left in them. They will come with everything pictured. Items will ship via USPS Priority Mail with delivery confirmation. International shipping will cost extra.
|
|
|
4 Tool Bit Indexable Metal Lathe Tool Holder Post-Atlas-Craftsman-South Bend
I recently obtained metal lathe related tools and accessories which I will be listing in several auctions. Items include several sets of chuck jaws. Steady rest, tool cutting bits, tool holders, live and dead centers and a vise. These are all for small to mid size lathes. I do not know the make of lathes these items originally came from, many items can fit a variety of different lathes. These items are all used in useable condition showing normal wear and usage. I can combine shipping on most of these items and due to weight I will use USPS flat rate priority boxes to ship if this is the cheapest and items will fit. View photos and measurements provided for condition and to see if items meet your needs. This listing is for the following: This listing is for a small 4 tool indexable metal lathe tool holder post. This holder measures 2 1/2” ... morex 2 3/8” with 10 locking bolts. Handle locks post into position after you select one of 4 tool bits that can be placed in this holder. This can save greatly on time for tool set-up. Comes with 2 tool bits. Tool slots are 7/16” high and 7/16” deep. Unknown which lathes it fits. This sells without reserve and“as is” I do not take offers after the auction ends on items that do not sell. If you are interested in this item. Make a bid. This item ships with a USPS tracking number, buyer may request insurance. I DO NOT SHIP OUT OF THE UNITED STATES. RETURN POLICY* On items I sell I try to provide as much descriptive and photographic information on condition. Size, known damage and what it is you are buying as my space and knowledge will allow. I try to provide as accurate information as possible and will try to answer additional questions when asked, if possible. If an item is listed as untested or unknown if item works, it is usually because I have no ability or means of testing it, not that the item does not work, it means I do not know. For this reason if an item is listed as selling“as is” there is no return of this item unless I have made a major error in its descript
|
|
|
Renishaw MH20 Manual Indexable CMM Touch Probe TP20 MF Mod with 90 Day Warranty
Powered by Frooition Pro Shop Search. Click to close full size. Item Description. Used Renishaw MH20 Manual Indexable CMM Probe Head with TP20 Medium Force Module and Mitutoyo Quill Cable Renishaw MH20 probe head and TP20 have been cleaned tested and meet original manufacturers specifications. The MH20 has a small blemish shown in picture 8 that does not affect its function and or accuracy. Renishaw MH20 and TP20 Module probe come with 90 day money back warranty. The Renishaw MH20 current list price with a TP20 module is $4090.00 A manually adjustable probe head featuring stylus module changing. About MH20 MH20 is a manually adjustable probe head with an integral kinematic stylus module mount. The A-axis rotates through 315° in the X-Y plane. The B-axis rotates through 93° in the Z plane. A thumbwheel locks the swivel in any position ... morewithin the movement envelope of the head. Qualification must take place after each head adjustment. But TP20 modules can be changed repeatably, provided qualification has already taken place and the head has not been re-adjusted. MH20 specification Specification Length 731 mm, Diameter 31.5 mm Weight, 100 g, Probe mounting kinematic mount Head mounting, MS/T range of shanks, Suitable interface PI 4-2 No. of probe sockets, 1, Probe status indication 1 LED Cable connection, 5 pin DIN 180º socket, A-axis indexing Non-indexing swivel ±93° B-axis indexing, Non-indexing swivel ±300°, Maximum extension bar EM2 extension module- 75 mm(2.95 in) This is a great price for a Renishaw MH20 probe and TP20 module with 90 day money back warranty. Please contact us should your application require a different TP20 force module. Why pay retail prices when you can purchase with warranty from Metrology Parts. Purchase with confidence from a Paypal verified retailer with 90 day return priveledge. If what you order is not what you receive you will be refunded the full purchase price for this sale. Metrology Parts would like the opportunity to earn your business for this s
|
|
|
NMTB 40 ISCAR T MILLING TOOL INDEXABLE
VERY NICE WELL 2" DIA ROUND INSERTS 4.
|
|
|
Iscar indexable slitting saw 4" x.370
Iscar Slitting Saw 4" Dia x.370/375 wide. Note: This is on a click fit arbor. Arbor# CF-4 Here is a sample of the arbor in a Cat Style holder 16 teeth and comes with 18 new inserts. This is a great find. These cutters list for $1280.00 Posted with
|
|
|
KENNAMETAL 4" INDEXABLE FACEMILL 1-1/4" ARBOR CAPACITY KSSR-4-SP4-15
Search Titles and Descriptions Categories Policies Gallery KENNAMETAL 4" INDEXABLE FACEMILL 1-1/4" ARBOR CAPACITY KSSR-4-SP4-15 KENNAMETAL 4" INDEXABLE FACEMILL 1-1/4" ARBOR CAPACITY KSSR-4-SP4-15 KENNAMETAL 4" INDEXABLE FACEMILL 1-1/4" ARBOR CAPACITY KSSR-4-SP4-15 Specifications Cutting Diameter: 4" Indexable Stations: 8. Arbor Capacity: 1-1/4" Overall Head Length: 1-3/4" This item comes as shown. Copyright c 2012 Bid On Industrial. Powered by
|
|
|
VALENITE HBN-170 INDEXABLE LATHE BORING BAR TOOL HOLDER & (2) HEADS
This is a used VALENITE HBN-170 lathe Boring bar with two indexable'heads' included. It's in good condition and at least one of the heads looks brand new. Shank dimensions. Part numbers etc. are shown in the pics. Great quality tool! Don't miss it as it includes super fast FREE Priority mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my ... morechoice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
|
|
|
UTS-28239 Indexable Chamfer Face Mill Cutter 3.25" Milling Cut 90 WUPF UTS 28239
Questions? Call us: 1-877-328-9236. UTS-28239 Indexable Chamfer Face Mill Cutter 3.25" Milling Cut 90 WUPF UTS 28239. Manufacturer: UST Model: UTS-28239 Condition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: UST Condition: Used. Comes in non-original packaging. There are some scratches and scuffs on the mill cutter from previous usage. The mill cutter is in good condition. Notes: No testing was performed. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) UTS-28239 Indexable Chamfer Face Mill Cutter 3.25" Specifications: Manufacturer: UTS(Ultra-Dex Tooling Systems) UTS-28239, 111698, Number of inserts: 3, SKU: M05N032 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 ... moreor(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. Local pick up is available for buyers and their direct employees. Warranty. This
|
|
|
LOT OF 6 INDEXABLE TOOLS Cutting diameter: 3 7/8 HSK 61
TRINITY SURPLUS Everything Sold With a 30 Day Money Back Guarantee LOT OF 6 INDEXABLE TOOL/HOLDERS This is a lot of 6 Indexable Tool Holders in good condition. Specifications: Cutting diameter: 3 7/8" Shank: 1.800" Length: 5" each unit weighs 8lb Comes as shown in pictures. local pick up Free LOCATION 90016 Condition: VERY GOOD Comes as shown in pictures. Buy Now Price US $199 Payment must be received in full within 7 days of the closing sale date. Confirmed paypal addresses are required for items over $200. Payment is accepted via PayPal. Personal check, cashier's check, or wire transfer. Items will be held until full payment is posted and cleared. The buyer is responsible for all shipping. Handling, and insurance costs prior to shipment. Shipping is available to all 50 states. Outer lying territories. Items will be shipped ... morewithin 4 business days of receiving a cleared payment. Shipments will be carried via UPS or USPS at our discretion. Insurance and signature confirmation are required for item purchases over $400. Combined shipping is available for items purchased within a 14 day period Returns are accepted within 30 days for items which are DOA or not as described. The buyer must report listing or description errors within 7 days of receipt. The return policy doesn't cover negligence. Abuse, or misuse of items. Items sold on an as is are not eligible for return. Returned items will be repaired. Exchanged, or refunded as we see fit. The buyer is responsible for all return shipping costs. Shipping and handling costs are non-refundable. On Feb-04-10 at 16:59:24 PST. Seller added the following information: On Jul-25-10 at 18:13:38 PDT. Seller added the following information: On Aug-26-10 at 02:08:35 PDT. Seller added the following information: GOOD DEAL ON ENTIRE LOT CAL JEREMIAH 310 293 0615 BUY MULTIPLE ITEMS GAIN MULTIPLE DISCOUNTS EMAIL OFFER JEREMIAH@TRINITYSURPLUS.COM OR CALL JEREMIAH 310 293 0615 LETS DEAL On Oct-10-10 at 15:22:01 PDT. Seller added the following information: THIS ITE
|
|
|
KORLOY 5/8" Alpha Mill Indexable Milling Cutter (AMSA2062S)
KORLOY Alpha Mill Indexable Milling Cutter(AMSA2062S) Mill Diameter: 0.625" Shank Diameter: 0.625" Overall Length: 3" Number of Flutes: 2 Direction: Right Hand Insert Style: APXT This item is in very good condition and comes as shown. Will ship out one day after receipt of payment.
|
|
|
SWEET!! KENNAMETAL 3" INDEXABLE FACEMILL w/ CAT40 SHANK
aims SWEET! KENNAMETAL 3" INDEXABLE FACEMILL w/ CAT40 SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Kennametal Inc. This is an Indexable Facemill w/ CAT40 Shank in GREAT condition. Facemill Model# KSSISR315SE44345M4 Shank Model# CV40SM100400 Specifications: Shank: CAT40. Cutting Diameter: 3" Number of Indexable Stations: 6. Maximum Speed: 18.000 rpm. Projection: 5-7/8" Overall Length: 10" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SWEET! KENNAMETAL 3" INDEXABLE FACEMILL w/ CAT40 ... moreSHANK SWEET! KENNAMETAL 3" INDEXABLE FACEMILL w/ CAT40 SHANK SWEET! KENNAMETAL 3" INDEXABLE FACEMILL w/ CAT40 SHANK Reliable Tool Inc. c 2011 | Powered by
|
|
|
KENNAMETAL INDEXABLE FACE MILL CUTTER 12 FL KSHR-6-SE4-15 6" DIAMETER (4921)
KENNAMETAL INDEXABLE FACE MILL CUTTER 12 FL KSHR-6-SE4-15 6" DIAMETER(4921) Number of flutes: 12 Diameter: 6" Hole Diameter: 2" MAXIMUM RPM: 1400 used tool in very good working condition please be sure to check out my other tools and equipment great quality tools and equipment at a fair price all my items are very well packed and posted within 2 business days if you would like any more pictures or have any questions please contact me and i will do all i can to help also if you live local and would like to preview any item and save on postage costs just contact me Thank you
|
|
|
Walter Indexable Ballnose Endmill Copy Milling 3/4" Cutter F2139.U5.19.160.20
Walter indexable ballnose endmill model F2139.U5.19.160.20 with 3 used inserts and 7 new inserts. 3/4" cutting diameter 3/4" shank diameter 6" overall length. Inserts are P3204-D19.05 WXM35 $20 standard ground shipping to Lower 48 and Canada
|
|
|
WAUKESHA WALTER 1-1/4" Indexable Milling Cutter (USA)
Waukesha Indexable Milling Cutter. Mill Diameter: 1.25" Shank Diameter: 1.25" Overall Length: 4" Number of Flutes: 3 Direction: Right Hand Made in USA This item is in good condition and comes as shown. Will ship out one day after receipt of payment.
|
|
|
Carmex .67" Indexable Thread Mill Toolholder 14mm Insert (SR0670H14)
Carmex Coolant Fed Mill-Thread Toolholder(SR0670H14) Swing Diameter: 0.67" Shank Diameter: 0.75" Neck Length: 1.18" Overall Length: 3.35" Number of Flutes: 1 Compatible Insert: 14mm This item is in excellent condition and comes as shown. Will ship out one day after receipt of payment.
|
|
|
Sandvik 5/8" Indexable End Mill U-Max R216.2-316
Sandvik Indexable U-Max End Mill R216.2-316 Cutting Diameter: 0.625" Shank Diameter: 0.625" Head Length: 0.984" Overall Length: 3.071" Direction: Right Hand Number of Inserts: 1 Insert Style: R216.2-100204 Made in Sweden This item is in excellent condition and comes as shown. Will ship out one day after receipt of payment.
|
|
|
Renishaw PH8 Manual Indexable CMM Touch Probe Head+Extensions+Styli+Knuckle+Case
Search our eBay Store! Renishaw PH8 Manual Indexable CMM Touch Probe Head+Extensions+Styli+Knuckle+Case SKU: JV-HAN-A-RENISHAWPH8 Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Renishaw PH8 Manual Indexable CMM Touch Probe Head+Extensions+Styli+Knuckle+Case. Model: PH8. Probe Mounting: M8 Thread. No. of Probe Sockets: 1. Probe Status Indication: 1 LED. Cable Connection: Integral Cable. Top Mount: 14mm Diameter x 50mm Length. Include: 1x PK1 M8 to M8 Probe Knuckle Joint. 1x PEL1 50mm Extension. 1x PEL2 100mm Extension. 1x PEL3 200mm Extension. 1x Disc Styli. 5x Straight Styli. 1x 5-way Stylus Centre. ... more3x 90° Stylus Knuckle. 1x 10mm Stylus Extension. 2x 20mm Stylus Extension. 1x 40mm Stylus Extension. 3x Hexagonal Keys. 3x S7 Stylus Tightening Tool. 1x S8 Stylus Holder Spanner. 4x Extension Spanners. 1x Touch Trigger Probe System User’s Guide. 1x Wood Extension Case. 1x Wood Styli& Accessory Case. 1x Wood Tool Case. Physical Condition: Good– Some scuffs/scratches on cases and head. One of the styli shows moderate signs of wear on the tip. The others are in good condition. Probe head has some markings engraved on the sides. Wood blocks in tool case are no longer attached to case. Functionality/Degree of Testing: We do not have the necessary resources to test this unit. Case Dimensions(L" x W" x H" 5-5/8 x 7 x 2-1/2; 5-5/8 x 7 x 3-1/4; 5-1/2 x 9 x 2-1/2. PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to F
|
|
|
Valenite VAL-U-DEX HP, VWDR-225-200-849, 2 1/4" Indexable Insert Drill - USED
You are bidding on( 1) USED Valenite VAL-U-DEX HP. VWDR-225-200-849, 2 1/4" Indexable Insert Drill- USED. P/N VWDR-225-200-849. Size- 2 1/4" 2.2500" Shank Dia. 50mm- 4 Flats. Flute Length- 7 1/2" OAL- 14 1/4" Insert Size- 421. Material- Carbide Inserts. Finish/ Coating- Black Oxide. Coolant Throught. Condition- USED- Appears to have been repaired behind inside insert- SEE PHOTOs FREE SHIPPING in the USA only. We use Ebay Shipping Calculator to figure our shipping. We ship USPS Priority Mail unless item is listed with different shipping details. We Combine Shipping for Multiple Items. 09C Tools. Powered by
|
|
|
★Renishaw MIP Manually Indexable CMM Probe Head & Shank-TESTED-60 DAY WARRANTY★
Catalog photo for reference purposes only( probe interf ace is not included) see photos of the actual item) Like new. Fully tested. Renishaw MIP Manually Indexable Probe Head with Mounting Shank. Model#A-1305-0002-02. This new condition compact size probe head is fully adjustable in the A& B axes using a single lever locking mechanism and offers 168 repeatable positions of adjustment in 15 degree steps. The integrated touch-trigger probe is both robust and reliable and t he trigger force is user adjustable using the included Allen wrench. The MIP probe head offered here. Serial# R84481, is furnished in the original packaging with Test Certificate. 9.5mm diameter S hank, Allen Wrench& User's Manual(emailed PDF file) The MIP probe head is backed by our full refund warranty- see below. WORLDWIDE SHIPPING AVAILABLE_ We're PayPal ... moreverified and offer the best. Full refund, warranty on Ebay: 90 days for new items and 6 0 days for used items(Ebay's listing template has a maximum return policy of 60 days so please disregard as we offer a 90 days warranty for new items) New items are guaranteed to be free of operational defects for 90 days and used items for 6 0 days. The warranty does not cover buyer's remorse or product abuse/mis-handling of any kind. Returned items must be received in exactly the same condition as when they were shipped to the buyer and contain all original paperwork/accessories etc. The return shipping cost is the responsibility of the buyer. Please note: All item serial numbers are recorded prior to shipping. We carry an extensive inventory of new and used precision measuring tools from only the top tier manufacturers- all at highly discounted prices- email us for our complete tools inventory list: sales@qc-tools.com Attention International Buyers! Any applicable foreign import duties/taxes are the sole responsibility of the buyer. Need tools? Se
|
|
|
Rotary Table ( 10 Inch Indexable Magnetic )
Roto-Technology 10 Inch Indexable magnetic rotary table. Excellent Condition. Used in gage shop.
|
|
|
Kennametal KTIP 0748R5SS075 Indexable drill body coolant through
Used- Kennametal KTIP indexable bit. KTIP0748R5SS075. This unit is in nice used condition. Please make sure this is what you need prior to bidding. Don't miss out. Check out my other auctions for more great deals from JSF Industrial! Washington state residents add 9.5% sales tax. Buyer must verify their address prior to bidding. If your package is returned due to faulty address. Then buyer agrees to pay the return shipping fees, as well as secondary shipping fees to get the item back to a valid address. If buyer wants a refund for the item, then the buyer agrees to pay the costs for the original shipping as well as the return shipping to sender. If buyer does not pay these fees, then the buyer agrees to forfeit all rights to the original total payment as well as the auction item. Powered by The free listing tool. List your items fast ... moreand easy and manage your active items.
|
|
|
Ingersoll 19.0 - 19.9mm YD1900095C8R01 Qwik Twist 5XD Indexable Drill
Ingersoll Qwik Twist 5XD Indexable Coolant Fed Drill(YD1900095C8R01) Drill Diameter: 19.0- 19.9mm Shank Diameter: 1" Drilling Depth: 3-3/4" Overall Length: 6-15/16" This item is used and comes as shown. Will ship out one day after receipt of payment.
|
|
|
KOMET 2 1/2" DIAMETER INDEXABLE DRILL - HOLDS 2 W TRIGON INSERTS
KOMET INDEXABLE DRILL 2 1/2" DIAMETER. 1 3/4" DIAMETER SHANK, 5 3/4" LENGTH OF CUT, 9" OVERALL LENGTH 2 FLUTE DOUBLE COOLANT THROUGH HOLDS 2 W/ TRIGON INSERTS AS SHOWN WITH SCREWS USED- PLENTY OF LIFE LEFT DISTRIBUTOR'S OVERSTOCK 9 LBS* ONLY ONE*
|
|
|
LINDSEY CARBIDE INDEXABLE DRILL #SEJ-150 &SEJ125-3/4SK
LINDSEY CARBIDE INDEXABLE DRILL( SEJ-150& SEJ125) BOTH#S ARE ON SHANK- W/3/4" SHANK- DOES NOT APPEAR TO HAVE BEEN USED- GOOD CONDITION- LITE RUST ISSUE ON SHANK. APPEARS TO BE 1 1/4" CUT DIA. HAS 2 INDEXABLE INSERTS. OVERALL LENGTH- 4 1/2" SHANK LENGTH 2 1/4" INV#61627. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ISCAR INDEXABLE CARBIDE INSERT CUTTER E90CC D1.00 - .80 - W 1.00 SHANK
Iscar indexable insert cutter. In good condition. FREE SHIPPING USA
|
|
|
TPG 322 INDEXABLE CARBIDE INSERT LATHE 1" BORING BAR tool holder 6-693-174
good used carbide insert boring bar mfg not marked 6-639-174 1" dia x 11" long has edge wear but insert clamps tight will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
TNG 332 INDEXABLE CARBIDE INSERT 3/4" LATHE TOOL HOLDER NEWCOMER USA TAR 12
good used carbide insert lathe tool Necomer USA Econo Clamp approx 3/4" W x 3/4" T x 6" holds TNG/ TNU 332 insert good seat and clamp will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
TPG 322 INDEXABLE CARBIDE INSERT 1" LATHE TOOL HOLDER VALENITE
very good used carbide insert lathe tool- never been crashed Valenite TL# 3631197-T-53 approx 1" T x 1" W x 6" holds TPG/ TPU 322 insert good seat. Clamp and usable insert will ship for $5.80anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
RNG 43 INDEXABLE CARBIDE INSERT 1" LATHE TOOL HOLDER VALENITE
good used carbide insert lathe tool Valenite approx 1" T x 1" W x 4" holds RNG 43 insert good seat and clamp will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SPG 422 INDEXABLE CARBIDE INSERT 1" LATHE TOOL HOLDER KENNAMETAL CSKPR-164D
good used carbide insert lathe tool KENNAMETAL CSKPR-164D approx 1" T x 1" W x 6" holds SPG/ SPMR 422 good seat. Clamp and usable insert will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Komet 15mm KUB TRIGON Indexable Coolant Drill HSK50-A W2910/15/45R
Komet KUB TRIGON HSK50-A Indexable Coolant Drill W2910/15/45R(EDP# V75 71500) Drill Diameter: 15mm Drill Length: 95mm Maximum Depth: 45mm Overall Length: 120mm Direction: Right Hand Connection: HSK50-A This item appears to be in excellent condition and comes as shown. Will ship out one day after receipt of payment.
|
|
|
Kyocera CERAMILL 1-1/2" Indexable End Mill CEM-150-2
Kyocera CERAMILL Indexable End Mill(CEM-150-2) Mill Diameter: 1-1/2" Shank Diameter: 1-1/4" Overall Length: 4" Direction: Right Hand Number of Inserts: 2 This item is used and comes as shown. Will ship out one day after receipt of payment.
|
|
|
Lot of (8) Indexable Carbide End Mills, 1" up to 3", Some OK, Some Need Repair
Lot of(8) Indexable Carbide End Mills. 1" up to 3" Some will be OK to use as is. Some will need parts such as clamps or screws and possibly some repair. We’ll describe them as best as we can: 1) 1" Diameter x 3/4" shank. Holds 3/8" Square inserts. bevel cut, looks 45 degree. Usable as is. 1) Same as first, but looks like about 15 degree cut. Marked"MUM-15-100. with inserts. OK to use. 1) 1" diameter x 3/4" shank, Holds 5/8" Triangle insert. Has screws and 1 chipped insert in it. Should be OK with inserts. 1) about 1 1/4" x 1" shank. Holds 3/4" tri angle insert. 2 are in it, but chipped. Rough looking, but should work OK. 1) 1 1/2" x 1 1/4" shank. No inserts. Missing 1 screw. 4 insert pockets kind of rough. Should be able to be reconditioned. Marked"AMS3490R" 1) ... more1 1/2" x 1" Shank. Rusty, Missing 1 screw. Should be able to recondition. 1) 2" diameter x 3.4" shank. Holds(3) triangle inserts 5/8" Has inserts in it. should be OK to use as is. and(1) 3" diameter x 1 1/4" shank. Holds 4 inserts. 2 broken ones in it. should be able to recondition. Shipping and handling costs for this listing will be $12.95 within the U.S.A. We will ship internationally if a cost or calculator shows below. Or please inquire for international shipping costs. Visit our eBay store for more great values. We will ship promptly. We want your 5 star feedback and will do all we can to make sure you are satisfied with your purchase. Please contact us first if you have any issues with your order upon receipt. Michigan sales will be invoiced with sales tax. Thank you! 01130410990)
|
|
|
VALENITE INDEXABLE COOLANT-THRU DRILL BIT TOOL HOLDER & INSERTS - NICE!
This is a lightly used(1.150" according to my calipers) VALENITE indexable drill bit with coolant thru capacity. Part number reads: VSDR-125-125-0862. Great condition with used inserts attached. Shank dimensions are shown in the pics. Great quality tool! Don't miss it as it includes super fast FREE Priority mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via ... moreUSPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
|
|
|
CERATIP Indexable Turning Toolholder PCLNR 16-4 1" x 1" x 6"
In good working condition. Shows normal wear from being used. Measures approx. 6" long and the shank measures apppox. 1" X 1" What you see in the photo's is what you get! If you have any questions. Feel free to ask. These are USED Toolmakers/ Machinist tools! NO RESERVE and thanks for bidding! Indexable Turning Toolholder PCLNR 16-4 HxB(Shank) 1"x1" L1(Overall Length) 6" L2: 1.10" f: 1. 25" Cutting Direction: Right Hand
|
|
|
KENNAMETAL COOLANT FED INDEXABLE DRILL W/ 1-1/4" SHANK - 1-3/8" - #CF1071885
aims KENNAMETAL COOLANT FED INDEXABLE DRILL W/ 1-1/4" SHANK- 1-3/8" CF1071885 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Kennametal. This is a Coolant Fed Indexable Drill in good condition. Model# CF1071885 Features: Used for deep hole drilling. Specifications: Current Cutting Diameter: 1-3/8" Shank: 1-1/4" Flutes: 3. Flute Length: 4" Overall Length: 8" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KENNAMETAL COOLANT FED INDEXABLE DRILL W/ 1-1/4" SHANK- 1-3/8" ... moreCF1071885 KENNAMETAL COOLANT FED INDEXABLE DRILL W/ 1-1/4" SHANK- 1-3/8" CF1071885 Reliable Tool Inc. c 2011 | Powered by
|
|
|
2-1/2" STEEL SPADE Drill bit Cutter Blade Tool Insert Indexable tooling hss hs
Item. SPADE Drill Bit Insert Tip Bottom cutting Manufacturer. Unknown but it has the Letter"M" on it inside a hole with cross hairs like a gun scope. I am sure it is USA Made Series. Diameter. 2.5" Hole Size. 452" x.758" Oval shaped L Type Locating Area. 1-3/4" Blade Thickness. 3/8" Condition. Very sharp used flat bottoming cut with a 1/4" radius This is not an actual photo but it is pretty much identical to the one in the photo. I have had a few of them in the past that were pretty much all the same so I have used this same photo for each one. We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you ... moreare willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay lis
|
|
|
Ingersoll 17.0 - 17.9mm YD170005118R01 Qwik Twist 3XD Indexable Drill
Ingersoll Qwik Twist 3XD Indexable Coolant Fed Drill(YD170005118R01) Drill Diameter: 17.0- 17.9mm Shank Diameter: 3/4" Drilling Depth: 2" Overall Length: 4-7/8" This item is in good condition and comes with 17mm insert shown. Will ship out one day after receipt of payment. jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13e169dc037-0xe5-
|
|
|
ISCAR Coolant-Fed Indexable Head Drill (with Insert)
ISCAR Coolant-Fed Indexable Head Drill(ID071 010NJ-E1R00938) I ncluded Insert: 0.705" 17.9mm Shank Diameter: 3/4" Overall Length: 8-1/2" This item is used and comes as shown. Will ship out one day after receipt of payment.
|
|
|
ISCAR Indexable ChamDrill DCM 0551-165-063A-3D
Iscar Coolant-Fed Indexable Head Drill DCM 0551-165-063A-3D. This item is in very good condition and comes as shown. Will ship out one day after receipt of payment. D min D max L d D3 L1 L4 Po. Size 0.551 0.567 1.65 0.625 0.790 2.41 1.89 14.0
|
|
|
WAUKESHA WALTER .781" COR-BOR Indexable Drill Long (8110-5050F)
WAUKESHA WALTER COR-BOR Indexable Drill(8110-5050F) Drill Diameter: 0.781" Shank Diameter: 1" Flute Length: 2-1/2" Shank Length: 4" Overall Length: 7-3/8" Inserts Required: 2 Direction: Right Hand Coolant Fed: Yes Made in USA This item is in very good condition. Will ship out one day after receipt of payment.
|
|
|
Lot #27 MITSUBISHI TASS 2000 2.00 DIA. INDEXABLE DRILL / COOLANT THRU. USED
Hello. Welcome to my auction. All items come to you from a closed machine shop auction. All items are in used condition unless otherwise stated. Now I am going to be listing some Indexable Drills that cam e from the auction. All of these drills have been used and have some form of ru b marks on them from running them. Everyone who runs indexable drills knows that usually chips can build up a nd cause rub marks on the flutes of the drills. With that said I will lis t all of the information below that is available and visible on the drills. Manufacturer: MITSUBISHI Part# TA SS 2000 DRILL DIAMETER: 2.000 S HANK DIAMETER: 2.000 O VERALL LENGTH: 10.500 DRILL DEPTH: 6.250
|
|
|
TPG 322 INDEXABLE CARBIDE INSERT 1 1/4" LATHE TOOL HOLDER VASCOLOY RAMET TFPR 85
good used carbide insert lathe tool VASCOLOY RAMET TFPR 85 approx 1" W x 1 1/4" T x 6" holds TPU/ TPG 322 insert will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
CNMG 543 INDEXABLE CARBIDE INSERT 1 1/4" LATHE TOOL HOLDER KENNAMETAL DCLNR 205D
good used carbide insert lathe tool Kennametal DCLNR 205D approx 1 1/4" W x 1 1/4" T x 6" holds CNMG/ CNMA/ CNMP 543 inserts has edge wear but will still clamp tight will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13e16b0ff7e-0xfa-
|
|
|
SPE-D-CUT Indexable Turning / Facing Tool Holder - Set of 7
SPE-D-CUT Indexable Turning/ Facing Tool Holders- Set of 7 Manufacturer Part Numbers: CTAPR-8-2(x4) CTCON-8-3(x2) The other is unmarked. But also in good working order. Made in USA. 0 0 1 12 75 WIT 1 1 86 14.0 Normal 0 false false false EN-US JA X-NONE I am getting rid of a lot of other good quality tools. Please check my other listings.
|
|
|
WAUKESHA WALTER 1" Indexable Ball Nose Milling Cutter (6200-0010F)
Waukesha Indexable Ball Nose Milling Cutter. Mill Diameter: 1.00" Shank Diameter: 1.00" Overall Length: 5" Number of Flutes: 2 Number of Inserts Required: 4 Direction: Right Hand Made in USA This item is used and comes as shown with two inserts and two screws. Will ship out one day after receipt of payment.
|
|
|
DEAL! 3/4" SINGLE INSERT INDEXABLE CHAMFER CUTTER / MILL W/ INSERT WRENCH
Made by unknown manufacturer(there are no manufacturer's markings visible on this tool) This is a good quality chamfer cutter/ mill in good condition. This sale includes the insert screw wrench shown in the picture. Part Number: marked"S" and"75" on the end and"06" on the back side of the head.there are no other markings Specifications: Boring Head Diameter: 0.81" Shank Diameter: 3/4" Length: 3.36" Come as shown in pictures. 819 2fiuqm.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bifc%3E2fiuqm-13e16cb4ce0-0xf5-
|
|
|
Amada 932000 Press Break Side Gauge Indexable Type
Amada 932000 Press Break Side Gauge Indexable Type Manufacture: Amada Made in Japan Sold as pictured. No returns on this item please(SOLD AS IS) Used- In GOOD Condition Shipping Includes Handling and Postage to the 48 Contiguous States(Alaska and Hawaii Extra) TERMS& CONDITIONS(Please read. You agree to these terms upon purchase) Payments Payments are due at the end of the auction. Any unpaid items may be offered to the next highest bidder within 4 business days. Any balance not paid in full will result in an unpaid dispute being filed with eBay after 4 business days. Wire Transfers and Direct Deposits Wire transfers are the most preferred method of payment. Please call us at 626-444-0311 for instructions. Credit Cards Due to fees charged by credit card companies to process a merchant sale. We do NOT accept credit cards for eBay purchases ... moreEXCEPT for PayPal payments.You may pay with PayPal as you normally do however we will not accept direct credit card payments via phone, etc. Cashiers Checks We accept cashiers checks and company checks. There may be a 1-5 business day delay to verify funds on any non-certified check. Please contact us in advance if you have questions so we may accommodate the delivery schedule of your item accordingly. California State Sales Tax State Tax applies to all state residents and businesses unless you provide proof of a resale certificate to us. Please Fax to 626-443-9588. Warranty Sterling Machinery offers a 30-day MDNA sanctioned warranty unless otherwise stated in the description of the ad. Items that are described and advertised‘AS-IS’ are NOT covered by this warranty and the buyer releases Sterling Machinery from any liability or claims related to such. Frequently Asked Questions Q: Can Sterling Machinery Help with the logistics of Machinery shipping. And Loading? A: Yes. We can arrange for your machine to be loaded. Shipped via flatbed, or common carrier. We have relationships with machinery riggers, machinery movers, and trucking services, all over the world. Call today t
|
|
|
Carboloy PSDPN-65-2 lathe tool holder indexable carbide
Used. See photos for condition. Carboloy PSDPN-65-2. A local warehouse was being cleaned out. And these were sitting on the shelves. We will gladly combine shipping on multiple purchases. If purchasing more than one item, contact us before you send payment and we will quote a lower shipping cost for you. This item is ready to ship. Check out my!
|
|
|
Sandvik coromant insert indexable dril 1/2 dia. 3/4 shank RA416.2-0500P19-31
One insert missing but both screws are there.
|
|
|
indexable insert drills - boring bars some Kennametal
Miscellaneous odd tools. What you see is what u get. 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13e1740d20c-0xf2-
|
|
|
SANDVIK 1.187" INDEXABLE INSERT COOLANT DRILL
SANDVIK COROMANT INDEXABLE DRILL 1.187" DIAMETER. 1.250" SHANK Good used condition. As pictured. Payment due within five days of purchase. Check. M/o, and PayPal accepted. $9.50 for USPS Priority Mail shipping with tracking. STOCK NO. DR1029 Thanks for looking!
|
|
|
MITSUBISHI BALL NOSE INDEXABLE COPY END MILL TBE 202W20-1-1/4 BALLMILL
YOU ARE BIDDING ON MITSUBISHI BALL NOSE INDEXABLE COPY END MILL TBE 202W20-1-1/4 BALLMILL POCKETS ARE IN GREAT SHAPE! THANKS FOR LOOKING!
|
|
|
4-WAY TURRET TOOL POST HEAVY DUTY INDEXABLE WARNER & SWASEY #1 MADE IN THE USA
Nice Warner& Swasey heavy duty square indexing turret Tool Post. Its 4" square. Its 3" high with a 5/8" tool slot. The bottom T-nut is 2" square. Made in the U.S.A. For a used Tool Post they don't get any better than THIS! There are NO STRIPPED or PULLED THREADS and there are NO Issues or Problems with this Tool Post. We just wanted to update our lathe with the new Aloris setup. PAYPAL ONLY
|
|
|
Kennametal S08-SCLPR2 Indexable Boring Bar, Carbide Insert, .5" Shank
We always combine shipping. Please read our policies. Below, for details. Get FREE SHIPPING when you spend $50 on two or more items! US only) Fastener quantity discounts: buy 5 packs of the same item: 5% off. 10 packs: 10% off. 20+ packs: contact us for quote. Discounts are not applied automatically. You must contact us BEFORE PAYING to get discounts. Kennametal S08-SCLPR2 Indexable Boring Bar. Carbide Insert, 5" Shank Item Description: Kennametal S08-SCLPR2 Indexable Boring Bar. Carbide Insert, 5" Shank Size/Specs: 5" Manufacturer: Kennametal MFR Part# S08-SCLPR2 Condition: Used. See note for further info. Notes: IMPORTANT POLICY INFORMATION BELOW. PLEASE READ BEFORE BUYING. This listing is for surplus parts. As such. Parts may be dusty from sitting on a shelf or in a warehouse for a long time. Unless otherwise stated in the ... moreitem description parts are unused and perfectly serviceable. SHIPPING PRICES: Click on the Shipping and Payments tab to see the shipping options and prices for this item before you buy. The shipping cost for your entire order with us is automatically calculated by the eBay shipping calculator based on the combined weight of your purchases and your chosen shipping method. The eBay shipping calculator does not know about USPS Flat Rate! If you would like your shipping priced using USPS Flat Rate. Please contact us before you pay. We ship USPS and UPS. Please pick your preferred shipping method at checkout. USPS is cheaper and generally reliable. But IS NOT TIME DEFINITE. If you need your order on or by a certain date. Please select a UPS shipping option. All UPS services are available, even if not shown in the listing. If you would like your order shipped UPS 2 Day, UPS Early AM, etc. please send us a note. If this listing has a First Class Mail shipping option. It will be the lowest cost shipping option for a quantity of one pack, but may not be the lowest cost option for higher quantities. Please be sure to check all shipping methods. If the calculated shipping cost looks high
|
|
|
Valenite HPTBR-12-3 Loc-a-dex CM1048 lathe tool holder indexable carbide
Used. See photos for condition. Valenite HPTBR-12-3 Loc-a-dex CM1048. Photos shown are representative of the other quantities as well. A local warehouse was being cleaned out. And these were sitting on the shelves. We will gladly combine shipping on multiple purchases. If purchasing more than one item, contact us before you send payment and we will quote a lower shipping cost for you. This item is ready to ship. Check out my!
|
|
|
KENNAMETAL INDEXABLE TURNING / GROOVING TOOL HOLDER W/ 3 INSERTS
aims KENNAMETAL INDEXABLE TURNING/ GROOVING TOOL HOLDER W/ 3 INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Kennametal. This is a Indexable Turning/ Grooving Tool Holder with 3 Inserts in good condition. Model# NSR-854D INS N-4-R Specifications: Shank Size: 1" x 1-1/4" Overall Length: 5-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. KENNAMETAL INDEXABLE TURNING/ GROOVING TOOL HOLDER W/ 3 INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
VALENITE INDEXABLE TURNING / GROOVING TOOL HOLDER W/ 3 INSERTS
aims VALENITE INDEXABLE TURNING/ GROOVING TOOL HOLDER W/ 3 INSERTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Valenite. This is a Indexable Turning/ Grooving Tool Holder with 3 Inserts in good condition. Model# MTENNS-16-4 D Specifications: Shank Size: 1" x 1" Overall Length: 6" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. VALENITE INDEXABLE TURNING/ GROOVING TOOL HOLDER W/ 3 INSERTS Reliable Tool Inc. c 2011 | Powered by
|
|
 |