|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$14.30 Shipping Condition: New Location: Wichita, United States Jacobs Chuck 0083602 HSK 63A End Mill Tool Holder 25mm Diameter with 110mm Projection Provides more accurate. Rigid tool holder-to-spindle mount tapers, ... moreTaper grounded to AT93, Easy change and set up. Low maintenance, Through spindle coolant is standard, The Jacobs HSK 63A end mill tool holder is designed to hold up to a 25-mm shank cutting tool. It has 110-mm projection. The Jacobs HSK 63A end mill tool holder is used for heavy duty cutting and general milling. The Jacobs HSK 63A end mill tool holder is able to provide more accurate. Rigid tool holder-to-spindle mount tapers. The taper is grounded to AT3. Easy changes and set-ups makes the Jacobs HSK 63A end mill tool holder a low maintenance product. The through spindle coolant is standard for all Jacobs end mill tool holders and the Jacobs HSK 63A end mill tool holder comes with a one year factory warranty All Jacobs Chuck Tool Holders are new and factory sealed. Each tool ships in the reusable protective tool holder capsule for storing when not in use. Accessories and Tightening Wrench not included. Unless otherwise stated. Can Be Purchased Locally
Buy It Now
$23.95 Shipping Condition: Used Location: Wilmette, United States This is a good condition end mill holder. The item is nice and clean. A great item.
Buy It Now
Free Shipping Condition: New Location: Farmington, United States CTMS connection text machine side C6. END MILL HOLDER. BLQ balance quality code G6.3. BHTA body half taper angle 4.100 deg. CTWS connection text workpiece ... moreside M10. ItemNumber Item Number 02532930. LB1 body length 1 0.591 in.
Buy It Now
Free Shipping Condition: New Location: Biddeford, United States
Buy It Now
Free Shipping Condition: New Location: Galena, United States R8. 25.4mm(1” x 7/16” thread, Shell Mill Holder, NOS- I do combine shipping. Buy any 10 or more Tooling items and shipping is FREE! Questions and Comments ... moreare Welcome, Thanks for Looking All my items that have shipping listed. Are on that single item purchase. Shipping gets combine on multiple purchases, so don’t worry so much about shipping only about shopping. Note: If you're looking for 7" x 10" Mini Lathe parts that I don't have listed. Contact me, all I need is a part number and I can give you a price quote. Thanks Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States SHARS TOOLS DRAW BAR 3MT 1/4“端铣刀适配器新. 莫尔斯锥度：3MT 3/8“ -16. You may ask for freight cost before buying tools. 经过热处理，为您提供持久的精度.
Buy It Now
$10.40 Shipping Condition: New Location: Chino, United States 3/4-16 Shell End Mill Holder Screw. AIR, POWER & HAND TOOLS. Get It Quick! Why should you buy from us?.
Buy It Now
Free Shipping Condition: New Location: Madison Heights, United States 5pcs CAT40 end mill holders, coolant thru, with extra setting screws. 1-1/4 x 4 x 6-11/16. 1 x 4 x 6-11/16. 7/8 x 3-3/4 x 6-7/16. 3/4 x 3-3/4 x 6-7/16. ... more5/8 x 3-3/4 x6-7/16.
Buy It Now
Free Shipping Condition: New Location: Euclid, United States R8. 25.4mm(1” x 7/16” thread, Shell Mill Holder, NOS- I do combine shipping. Buy any 10 or more Tooling items and shipping is FREE! Questions and Comments ... moreare Welcome, Thanks for Looking All my items that have shipping listed. Are on that single item purchase. Shipping gets combine on multiple purchases, so don’t worry so much about shipping only about shopping. Note: If you're looking for 7" x 10" Mini Lathe parts that I don't have listed. Contact me, all I need is a part number and I can give you a price quote. Thanks Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States BT40 SOLID END MILL TOOL HOLDER. Condition: Used. YOU ARE PURCHASING THE PICTURED. SIZE & LABELING.
Buy It Now
$7.65 Shipping Condition: New Location: Sheboygan Falls, United States R8 Collet Organizer- Wall Mounting. Also available as a Bench Top design. Bridgeport type R-8 collet storage rack with engraved easy to read size labels. ... morePartial list other collet racks available: 5C, TG100, TG75, ER40, ER32, ER25, ER20, ER16, ER11, DA180, DA200, 6K, TF-20, TF-25, and Tap & TapDrill Storage Racks.
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States 1 x CAT40 3/8 X 1.75" End Mill Tool Holder. Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing, minimize ... morevibration and maximize the cutting tool's life cycle and greatly improve surface finish.
Buy It Now
$6.75 Shipping Condition: Used Location: Littleton, United States SECO Minimaster MM12-0.75-3.7-3 Indexable Endmill Tool Holder Swiss Made, Used We combine shipping Free returns
Buy It Now
$23.85 Shipping Condition: Used Location: Richland, United States .750" End Mill Holder Type: End Mill CT50 CAT 50 ID: .750" Nose Diameter: 1.75" Projection: 3.75" Bore Depth: 6.0" Through-Spindle Coolant Seller Reference ... more#18
Buy It Now
$21.97 Shipping Condition: New Location: Cleveland, United States Value 4GZG4 End Mill Holder. We are happy to help.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Glendale, United States 3/8" 4-Flute HSS End Mill Included.
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States Unique design feature in the extension nose to minimize the off-balance nature of CAT 40 taper specification. Evenly weight distribution will minimize ... morecentrifugal force in high speed spinning and thus maximize the holder's ability to hold the cutting tool concentric to spindle rotation.
Buy It Now
$13.55 Shipping Condition: Used Location: Highland, United States LYNDEX Cat40 C4006-0500 1/2" CAT 40 End Mill tool Holder japan.
Buy It Now
Free Shipping Condition: Used Location: Whitney Point, United States Nice condition HAAS Brand 3/4” stub end mill tool holder with no pull studHaas part number TH111061Free shipping in continental US 48
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States CAT40 SOLID END MILL TOOL HOLDER. Manufacturer: ERICKSON. Condition: Used. ITEM TITLE. SIZE & LABELING.
Buy It Now
Free Shipping Condition: New Location: Euclid, United States PRECISION R8 3/8" END MILL HOLDER Work on all Bridgeport. ENCO, JET, SHARP, Alliant and ACER Milling Machine with R8 spindles Description Bore size: ... more3/8" R8 Shank Hardened and ground We Also Have Other Precision R8 End Mill Holders Available at My Ebay Store. Please Contact Us for More Information and Prices! 202-5353 1/8" 202-5354 1/4" 202-5301 3/16" 202-5303 1/2" 202-5306 7/8" If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone: 1-630-443-3244 Please direct any questions to our eBay Message Box. PAYMENT: We accept VISA. Master Card and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools. Feel free to email us at our eBay Message Box.
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States SHARS 10 PCS CAT40 PULL STUD RETENTION KNOB FITS MAZAK. Shars tools are manufactured by anISO 9001 certified manufacturer with 60 plus years of hands-on ... moreexperience in the CNC machining industry. & Mazak Other studs will be slightly higher.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States CAT40 SOLID END MILL TOOL HOLDER. Condition: Used. YOU ARE PURCHASING THE PICTURED. SIZE & LABELING.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Taper: M.T.5. Made of alloy forged steel for long, durable service life. Hardened and ground to ensure maximum accuracy. Holders are for single & double ... moreend mills.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States Manufacturer: CINTIMATIC. KWIK-SWITCH 300 SOLID END MILL TOOL HOLDER. Condition: Used. YOU ARE PURCHASING THE PICTURED. SIZE & LABELING. MPN: AB0487BS2.
Buy It Now
$12.00 Shipping Condition: New Location: Mountain Home, United States Kennametal End Mill Holder 3/8 inch-New
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States MT5 SOLID END MILL TOOL HOLDER. Manufacturer: WELDON TOOL. WELDON TOOL. Condition: Used. YOU ARE PURCHASING THE PICTURED. SIZE & LABELING. MPN: BT4029BJ3.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States MT4 SOLID END MILL TOOL HOLDER. Manufacturer: WELDON TOOL. WELDON TOOL. Condition: Used. SIZE & LABELING.
Buy It Now
$24.95 Shipping Condition: Used Location: Vancleave, United States This is a lot of CNC end mill tool holders.
Buy It Now
$25.75 Shipping Condition: Used Location: Richland, United States .250" Extended End Mill Holder Brand: Precision Components Type: End Mill Holder CAT 50 Part Number: CAT-50-.250-12 ID: .250" Projection: 11.5" Through-Spindle ... moreCoolant Seller Reference #33.1
Buy It Now
$28.00 Shipping Condition: Used Location: Richland, United States .750" End Mill Holder, Nikken Type: End Mill Holder CAT 50 Part Number: ID: .750" Nose Diameter: 1.875" Projection: 5.375" Bore Depth: 8.0" Through-Spindle ... moreCoolant Seller Reference #22
Buy It Now
Free Shipping Condition: New Location: Biddeford, United States
Buy It Now
$10.00 Shipping Condition: Used Location: Mountain Home, United States NMTB40 End Mill Holder 1 1/4 inch
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States CAT40 SOLID END MILL TOOL HOLDER. Manufacturer: LYNDEX. Condition: Used. SIZE & LABELING.
Buy It Now
$8.00 Shipping Condition: New Location: Irvine, United States TTS groove version available in ER20 ER25 ER32 and ER16 too. OVERALL LENGTH7 2.68" SHANK LENGTH 1.38 SHANK WITH FLAT NO. SHANK TYPE LATHE CHUCK DRAWBAR ... moreTHREAD NO FLANGE SIZE 1.50". Send Check to 192 technology dr. Site P Irvine CA92618.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States CAT40 SOLID END MILL TOOL HOLDER. Manufacturer: LYNDEX. Condition: Used. YOU ARE PURCHASING THE PICTURED. SIZE & LABELING. MPN: JP0897AK2.
Buy It Now
$7.50 Shipping Condition: New Location: Irvine, United States TTS groove version available in ER20 ER25 ER32 and ER16 too. OVERALL LENGTH7 2.68" SHANK LENGTH 1.38 SHANK WITH FLAT NO. SHANK TYPE LATHE CHUCK DRAWBAR ... moreTHREAD NO FLANGE SIZE 1.50". Send Check to 192 technology dr. Site P Irvine CA92618.
Buy It Now
Free Shipping Condition: Used Location: Whitney Point, United States Nice condition HAAS Brand 1” stub end mill tool holder with no pull studHaas part number TH111081Free shipping in continental US 48
Buy It Now
$23.85 Shipping Condition: Used Location: Richland, United States Nikken CAT50 3/8" END MILL HOLDER, WE3/8A-135U Model: WE3/8A-135U Item: End Mill Holder Dimension Type: Inch Taper Size: CV50 Bore Diameter: .375"Projection: ... more5-3/8" Nose Diameter: 1.00" Coolant Fed: Coolant Through Seller Reference #36.1
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States Type: CAT40. 3 x CAT40 1/2 x 1.75" End Mill Tool Holder. Fits on Haas, Fadal, Mazak, Mori Seiki, Kitamura, Hurco. Max RPM Balanced To：G2.5 20000. We will ... moredo everything we can to give you a satisfying solution.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States CAT50 3/4 ID SOLID END MILL TOOL HOLDER. 75 COOLANT 5 3/4 PROJ. CAT50-EM3/4"-150. CAT50 SOLID END MILL TOOL HOLDER. Condition: Used. SIZE & LABELING.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States CAT50 SOLID END MILL TOOL HOLDER. Condition: Used. YOU ARE PURCHASING THE PICTURED. SIZE & LABELING. MPN: CB2812FKB.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States CAT50 PARLEC 1" I.D. SOLID END MILL TOOL HOLDER 1.0 COOLANT 6" PROJ. Manufacturer: PARLEC. CAT50 SOLID END MILL TOOL HOLDER. Condition: Used. SIZE & LABELING.
Buy It Now
$11.65 Shipping Condition: Used Location: Las Vegas, United States It doesn't appear that it was ever used.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Made of alloy forged steel for long, durable service life. Hardened to RC 56-60 and ground to ensure maximum accuracy. Drawbar Threads: 1/2" - 13 Holders ... moreare for double end mills.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States CAT40 SOLID END MILL TOOL HOLDER. Condition: Used. YOU ARE PURCHASING THE PICTURED. SIZE & LABELING.
Buy It Now
$9.70 Shipping Condition: New Location: Saint Charles, United States SHARS 8 Pieces Precision R8 End Mill Holder Set NEW Product Code 202-5310 Product description Bore: 3/16~1-1/4" Drawbar Thread: 7/16"20 8 Pc ... moreSet Includes the following sizes: 3/16" 3/8" 1/2" 5/8" 3/4" 7/8" 1" 1-1/4" Product features Hardened and Ground Made for high quality steel forgings Precision ground concentric Ground shank and hole. Heat treated for double accuracy 8 pc Set If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone: 1-630-443-3244 Email: DISCOUNTMACHINE@AOL.COM PAYMENT: We accept VISA. MasterCard and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped. Buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools. Feel free to email us at DISCOUNTMACHINE@AOL.COM
Buy It Now
$8.50 Shipping Condition: Used Location: Coloma, United States NMBT30 1/2" END MILL HOLDER.
Buy It Now
$10.40 Shipping Condition: New Location: Chino, United States 3/8" R8 End Mill Holder. For double and single end mills. AIR, POWER & HAND TOOLS. Drawbar end thread is 7/16"-20. Get It Quick! Why should you buy from ... moreus?.
Buy It Now
$7.95 Shipping Condition: Used Location: Cleveland, United States BT40 TAPER SHANK. LYNDEX 3/8" END MILL HOLDER. Used condition. Actual item pictured.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States CAT40 SOLID END MILL TOOL HOLDER. Condition: Used. YOU ARE PURCHASING THE PICTURED. SIZE & LABELING.
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States Max Rpm Balanced: G2.5 20000. Tool holder is balanced to G2.5 20,000 RPM. Balanced tool holder minimizes the centrifugal forces which minimize the stress ... moreon spindle bearing, minimize vibration and maximize the cutting tool's life cycle and greatly improve surface finish.
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States Type & Size : NMTB40. Projection : 1 7/8".
Buy It Now
Free Shipping Condition: Used Location: Dayton, United States CAT50 SOLID END MILL TOOL HOLDER. LOCATION: BUTH5-2-4. Condition: Used. YOU ARE PURCHASING THE PICTURED. SIZE & LABELING.
Buy It Now
$26.82 Shipping Condition: New Location: Chino, United States Fully ground flange and V-groove is easy on the tool changers for less spindle and changer maintenance. Extended lengths have extra strong shanks for ... moresteadying long tools so they cut smoother, faster, and last longer which is indispensable for high feed rates.
Buy It Now
Free Shipping Condition: New Location: South Hackensack, United States Taper: M.T.4. Holders are for single & double end mills. Hardened and ground to ensure maximum accuracy.
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States Type: CAT40. 1 x CAT40 3/4" x 1.75" End Mill Tool Holder. 1、Tool holder is balanced to G2.5 20,000 RPM. Balanced tool holder minimizes the centrifugal ... moreforces which minimize the stress on spindle bearing, minimize vibration and maximize the cutting tool's life cycle and greatly improve surface finish.
Buy It Now
Free Shipping Condition: New Location: Farmington, United States HSK A63 EM 10-065 3/8" Bore Diameter 2.56" Projection 1.38" Nose Diameter 1.57" Bore Depth 3-7/8" Overall Length .
Buy It Now
Free Shipping Condition: New Location: Troy, United States Gs Cat40 3/4” milling chuck. 1.5” LOC, 0.060cr and AlTin coated. This is a power combo. Holder hasn’t been abused or crashed.
|
|
|
|
NMTB 40 TAPER - 1 1/2" FACE MILL ARBOR milling machine tool holder LYNDEX Q/C
good used nmtb 40 taper- 1 1/2" face mill arbor- Q/C flange Lyndex japan FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NMTB 40 TAPER - 1 1/4" FACE MILL ARBOR milling machine tool holder DEVLIEG USA
good used nmtb 40 taper- 1 1/4" face mill arbor Devlieg USA 40M-S125 FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NMTB 40 TAPER - 1" FACE MILL ARBOR milling machine tool holder DEVLIEG 40M-S100
good used nmtb 40 taper- 1" face mill arbor Devlieg 40M-S100 FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e5b9df48c-0xfd-
|
|
|
NMTB 40 - 4 MORSE TAPER DRILL HOLDER mill milling machine tool DEVLIEG 40ME-4M
good used nmtb 40- 4 morse taper drill holder Q/C flange DEVLIEG USA 40ME-4M FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NMTB 40 - 3 MORSE TAPER DRILL HOLDER mill milling machine tool DEVLIEG 40M-3M
good used nmtb 40- 3 morse taper drill holder DEVLIEG USA 40M-3M FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e5b9df4d3-0x102-
|
|
|
Machinists (12) Brown & Sharpe?? End Mill Holder R-8 x 1 1/2
Really Nice Little Use Super HD Construction Fully Machined Holder NOT CHINA! Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" no no no no no no no el bono on shipping see pic 4 details Combine Shipping CHEAP SHIPPING Will Ship Anywhere and Everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice ... morestuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5-10 even 15 pieces and I can cram it all into one flat rate 5.00 envelope. I am not a for profit shipper(small club around here!I just want to clear out all of this stuff# REAL COST NON ABUSIVE SHIPPING-NO"I FEEL LIKE AN IDIOT TO PAY THAT MUCH SHIPPING" Nice stuff Combine!
|
|
|
MILL STOP HOLDER FOR 1/2" BAR
UP FOR SALE IS THIS MILL STOP HOLDER FOR 1/2" BAR. THIS IS A USED TABLE MOUNTED STOP HOLDER FOR MILL OR GRINDER. FOR A 3/4" SLOTTED TABLE. THE STOP BAR HOLE IS 1/2" DIAMETER ON ONE SIDE AND REDUCED DOWN TO 1/4" ON OPPOSITE SIDE. COULD HAVE OTHER USES. NEEDS CLEANING. WHAT YOU SEE IS WHAT YOU GET. SOLD AS IS! E-MAIL ME WITH ANY QUESTIONS YOU MIGHT HAVE ABOUT THIS ITEM. GOOD LUCK! I SHIP OUT ITEMS TWICE A WEEK! NOTE: PAYPAL PAYMENTS MUST BE RECEIVED WITHIN 10 DAYS OF AUCTION END TIME. WE DO NOT SHIP TO ALASKA. HAWAII. CANADA OR ANY OTHER COUNTRIES! I WILL NOT LEAVE FEEDBACK UNTIL I RECEIVE FEEDBACK. 2895
|
|
|
Briney V50E-200-562 Cat 50 2"End Mill Holder 5-1/2"Projection Coolant
Briney V50E-200-562 Cat 50 2"End Mill Holder 5-1/2"Projection Coolant SPECIFICATION Bullseye Catalog# 30294 Cat 50 CV V-Flange Taper, Approximate 5-1/2"projection from the back of the CV Flange to the tip of the tool holder, 2"end mill shank diameter, Coolant through spindle capability, Weight: 15 lbs, CONTACT INFO: Contact us Monday- Friday 8am-4pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know ... moreat the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a f
|
|
|
Sandvik Cat 50 Taper 5/8" End Mill Holder, # 50MM-VF4-EM5, Used, WARRANTY
Title: Sandvik CAT 50 Taper 5/8" Endmill Holder Description: Our Internal Stock# RACK2-1-14(4/30/13 dan) You are about to purchase the following item: Catalog# 50MM-VF4-EM5 CAT 50 5/8" End Mill Holder 3-1/4" From Bottom of V-Flange to Nose of Holder Complete This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct ... moreshipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item.
|
|
|
Sandvik Cat 50 Taper 3/8" End Mill Holder, # 50MM-VF4-EM3, Used, WARRANTY
Title: Sandvik CAT 50 Taper 3/8" Endmill Holder Description: Our Internal Stock# RACK2-1-13(4/30/13 dan) You are about to purchase the following item: Catalog# 50MM-VF4-EM3 CAT 50 3/8" End Mill Holder 3-1/4" From Bottom of V-Flange to Nose of Holder Complete This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct ... moreshipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item.
|
|
|
Sandvik Cat 50 Taper 1/2" End Mill Holder, # 50MM-VF4-EM4, Used, WARRANTY
Title: Sandvik CAT 50 Taper 1/2" Endmill Holder Description: Our Internal Stock# RACK2-3-8(4/30/13 dan) You are about to purchase the following item: Catalog# 50MM-VF4-EM4 CAT 50 1/2" End Mill Holder 3-1/4" From Bottom of V-Flange to Nose of Holder Complete This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct ... moreshipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. T
|
|
|
Sandvik Cat 50 Taper 1" End Mill Holder, # 50MM-VF4-EM8, Used, WARRANTY
Title: Sandvik CAT 50 Taper 1" Endmill Holder Description: Our Internal Stock# RACK2-3-7(4/30/13 dan) You are about to purchase the following item: Catalog# 50MM-VF4-EM8 CAT 50 1" End Mill Holder 3-1/4" From Bottom of V-Flange to Nose of Holder Complete This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping ... morecost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. There
|
|
|
SECO CAT50 2" DIA END MILL HOLDER GREAT CONDITION CAT 50 LOT C1951
SquareTrade © AP6.0 LOT# 1951 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A SECO CAT50 2" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! On Apr-01-13 at 14:06:22 PDT. Seller added the following information:
|
|
|
MADE IN USA CAT 50 3/8" END MILL HOLDER CAT50 LOT C2385
SquareTrade © AP6.0 LOT#2385 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA CAT50 3/8" DIA. END MILL HOLDER. THIS CAT50 HOLDER IS IN GREAT CONDITION. WE ALSO HAVE MORE CAT50 HOLDERS LISTED. Check out my other items! IF YOU HAVE ANY QUESTIONS EMAIL OR CALL 937-672-9876. Be sure to add me to your.
|
|
|
FITZ-RITE CAT50 2" DIA END MILL HOLDER GREAT CONDITION CAT 50 LOT C1949
SquareTrade © AP6.0 LOT# 1949 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A FITZ-RITE CAT50 2" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! On Apr-01-13 at 14:06:22 PDT. Seller added the following information:
|
|
|
TECNARA CAT 50 3/4" END MILL HOLDER CAT50 LOT C2332
SquareTrade © AP6.0 LOT#2332 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A TECNARA CAT50 3/4" DIA. END MILL HOLDER. THIS CAT50 HOLDER IS IN GREAT CONDITION. WE ALSO HAVE MORE CAT50 HOLDERS LISTED. Check out my other items! IF YOU HAVE ANY QUESTIONS EMAIL OR CALL 937-672-9876. Be sure to add me to your.
|
|
|
FITZ-RITE CAT50 2" DIA END MILL HOLDER GREAT CONDITION CAT 50 LOT C1950
SquareTrade © AP6.0 LOT# 1950 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A FITZ-RITE CAT50 2" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! On Apr-01-13 at 14:06:22 PDT. Seller added the following information:
|
|
|
5" Sandvik Mill Face with Kennametal Holder, Cat 50
Description: Sandvik 5" Face Mill(left) Kennametal Holder Cat 50 Good working condition has normal wear and tear from pervious usage; very light surface rust may be present from storage. If you would have more questions please email. Shipping: We ship Monday- Friday excluding major holidays Working hours 8am to 4pm*Alaska/Hawaii we will ship with no extra cost as long as if fits into a flat rate USPS box. If order has to be shipped standard USPS buyer pays the additional charges. We are willing to ship internationally but all additional shipping. Import duties and fees are the buyer’s responsibility. International orders will not be shipped until all payments are paid and have cleared. Happy Bidding
|
|
|
Valenite CAT50 1/2" End Mill Holder, V50CT-E50, Used, WARRANTY
Title: Valenite CAT 50 Taper 1/2" End Mill Holder Description: Our Internal Stock# RACK4-1-1(5/1/13 dan) You are about to purchase the following item: Catalog# V50CT-E50 CAT 50 1/2" Endmill Holder 2-1/4" From Bottom of V-Flange to Nose of Holder Pull Stud Complete This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the ... morecorrect shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that
|
|
|
Valenite CAT50 3/8" End Mill Holder, V50CT-E37, Used, WARRANTY
Title: Valenite CAT 50 Taper 3/8" End Mill Holder Description: Our Internal Stock# RACK4-1-2(5/1/13 dan) You are about to purchase the following item: Catalog# V50CT-E37 CAT 50 3/8" Endmill Holder 2-1/4" From Bottom of V-Flange to Nose of Holder Pull Stud Complete This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the ... morecorrect shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that
|
|
|
Nikken BT-35 -FMD31.75-75 Shell Mill holder (extended)
BT-35 FMD31.75-75 LIKE NEW! Please call or email if you should have any questions! 662-289-7510 lriley616@yahoo.com Located in zip code 39090
|
|
|
KENNAMETAL QC30 EM20 Sidelock 20mm End Mill Holder 30 INT ISO Bridgeport etc
FIRSTLY I KNOW LITTLE ABOUT ENGINEERING TOOLS.PLEASE CHECK THE PICTURE OR ASK QUESTIONS TO CONFIRM MY DESCRIPTION IS CORRECT BEFORE BIDDING TOP QUALITY KENNAMETAL SIDELOCK END MILL HOLDER 20mm IN ALMOST NEW CONDITION AS PICTURED FROM AN ENGINEERING WORKS CLOSURE QUESTIONS?RING PAUL ON 07828 234373
|
|
|
Davis 314-01531 CAT50 V-Flange End Mill Holder 1-1/2" Bore Tool Holder
Up for sale here is a Davis 314-01531 CAT50 V-Flange End Mill Holder 1-1/2" Bore Tool Holder. Used in good condition. Feel free to ask any questions. SCT2174
|
|
|
Modco Tools V50CT-125-GL CAT-50 V-Flange End Mill Tool Holder 1-1/4" Bore
Up for sale here is a Modco Tools V50CT-125-GL CAT-50 V-Flange End Mill Tool Holder 1-1/4" Bore. Used in good condition. Feel free to ask any questions. SCT2173
|
|
|
Kennametal Cat 50 Taper 1/2" End Mill Holder, # CV50BHC050300, Used, WARRANTY
Title: Kennametal Hertel CAT 50 Taper Endmill Holder Description: Our Internal Stock# RACK4-1-7(5/1/13 dan) You are about to purchase the following item: Catalog# CV50BHC050300 CAT 50 1/2" End Mill C2 N10 3" From Top of V-Flange to Bottom of Holder Made in Germany This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct ... moreshipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item.
|
|
|
KENNAMETAL CAT50 1/2" DIA END MILL HOLDER GREAT CONDITION CAT 50 LOT C1466
SquareTrade © AP6.0 LOT# 1466 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A KENNAMETAL CAT50 1/2" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! On Apr-04-13 at 02:01:51 PDT. Seller added the following information:
|
|
|
KENNAMETAL CAT 50 1 1/4" END MILL HOLDER CAT50 LOT C2331
SquareTrade © AP6.0 LOT#2331 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A KENNAMETAL CAT50 1 1/4" DIA. END MILL HOLDER. THIS CAT50 HOLDER IS IN GREAT CONDITION. WE ALSO HAVE MORE CAT50 HOLDERS LISTED. Check out my other items! IF YOU HAVE ANY QUESTIONS EMAIL OR CALL 937-672-9876. Be sure to add me to your.
|
|
|
NIKKEN BT40 5/8" END MILL TOOL HOLDER MORE LISTED BT 40 CNC MILL LOT C2399
SquareTrade © AP6.0 LOT# C2399 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A NIKKEN BT40 5/8" DIA. END MILL TOOL HOLDER Check out my other items! IF YOU HAVE ANY QUESTIONS EMAIL OR CALL 937-672-9876. Be sure to add me to your.
|
|
|
MADE IN USA NMTB 50 1" DIA. ENDMILL END MILL HOLDER GOOD COND. NMTB50 LOT C1574
SquareTrade © AP6.0 LOT# C1574 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA NMTB50 1" DIAMETER END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE MORE NMTB 50 HOLDERS LISTED AND WILL BE LISTING MORE. GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! On May-01-13 at 14:18:19 PDT. Seller added the following information:
|
|
|
NMTB 50 1-1/4" DIA. ENDMILL END MILL HOLDER GOOD COND. NMTB50 LOT C1658
SquareTrade © AP6.0 LOT# C1658 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA LYNDEX NMTB50 1-1/4" DIAMETER END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE MORE NMTB 50 HOLDERS LISTED AND WILL BE LISTING MORE. GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your!
|
|
|
NMTB 50 1-1/4" DIA. ENDMILL END MILL HOLDER GOOD COND. NMTB50 LOT C1607
SquareTrade © AP6.0 LOT# C1607 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA ERICKSON NMTB50 1-1/4" DIAMETER END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE MORE NMTB 50 HOLDERS LISTED AND WILL BE LISTING MORE. GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your!
|
|
|
NMTB 50 3/4" DIA. ENDMILL END MILL HOLDER GOOD COND. NMTB50 LOT C1656
SquareTrade © AP6.0 LOT# C1656 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA NMTB50 3/4" DIAMETER END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE MORE NMTB 50 HOLDERS LISTED AND WILL BE LISTING MORE. GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your!
|
|
|
NMTB 50 3/4" DIA. ENDMILL END MILL HOLDER GOOD COND. NMTB50 LOT C1655
SquareTrade © AP6.0 LOT# C1655 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA NMTB50 3/4" DIAMETER END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE MORE NMTB 50 HOLDERS LISTED AND WILL BE LISTING MORE. GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your!
|
|
|
TSD UNIVERSAL CAT 50 1 1/4" END MILL HOLDER CAT50 LOT C2318
SquareTrade © AP6.0 LOT#2318 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A TSD UNIVERSAL CAT50 1 1/4" DIA. END MILL HOLDER. THIS CAT50 HOLDER IS IN GREAT CONDITION. WE ALSO HAVE MORE CAT50 HOLDERS LISTED. Check out my other items! IF YOU HAVE ANY QUESTIONS EMAIL OR CALL 937-672-9876. Be sure to add me to your.
|
|
|
SWIVEL BASE for 6" MILL VISE milling machine work holder tool ERON JAPAN 204
good used swivel base for 6" mill vise Eron japan# 204.985" center pin x 7 1/2" bolt circle please check my other auctions and happy bidding! will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NMTB 40 TAPER - 3/8" END MILL HOLDER milling machine WELDON TOOL USA B/PB-13538
good used nmtb 40 taper- 3/8" end mill holder Weldon Tool USA B/PB-13538 9 3/4" long FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items. f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13e62e18299-0x108-
|
|
|
NMTB 40 TAPER - BORING & FACING HEAD mill tool holder bar hss DEVLIEG 40M-250L
good used nmtb 40 taper- boring& facing head Devlieg Wedgebore 40M-250L holds 1/4" hss bit 2 3/8" dia at nose x 14" long FREE SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LYNDEX BT40 1/8" END MILL TOOL HOLDER MORE LISTED BT 40 CNC MILL LOT C2284
SquareTrade © AP6.0 LOT# C2284 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A LYNDEX BT40 1/8" DIA. END MILL TOOL HOLDER Check out my other items! IF YOU HAVE ANY QUESTIONS EMAIL OR CALL 937-672-9876. Be sure to add me to your.
|
|
|
LYNDEX BT40 1/8" END MILL TOOL HOLDER MORE LISTED BT 40 CNC MILL LOT C2285
SquareTrade © AP6.0 LOT# C2285 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A LYNDEX BT40 1/8" DIA. END MILL TOOL HOLDER Check out my other items! IF YOU HAVE ANY QUESTIONS EMAIL OR CALL 937-672-9876. Be sure to add me to your.
|
|
|
COLLIS BT40 1-1/4" END MILL TOOL HOLDER MORE LISTED BT 40 CNC MILL LOT C2281
SquareTrade © AP6.0 LOT# C2281 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A COLLIS BT40 1-1/4" DIA. END MILL TOOL HOLDER Check out my other items! IF YOU HAVE ANY QUESTIONS EMAIL OR CALL 937-672-9876. Be sure to add me to your. n6gonr.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3En6gonr-13e63669033-0xf7-
|
|
|
NMTB 50 TAPER - 7/8" HORIZONTAL MILL ARBOR milling tool holder SCULLY JONES USA
used nmtb 50 taper- horizontal mill arbor Scully Jones USA 507/8B-12 7/8" x 19" long 1" drawbar thread please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NMTB 50 TAPER - 1 1/2" HORIZONTAL MILL STUB ARBOR milling tool holder CINCINNATI
used nmtb 50 taper-horizontal mill arbor- stub Cincinnati USA 1/2B-24-4 1 1/2" x 13 1/2" long 1" drawbar thread please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NMTB 40 TAPER - 1 1/4" HORIZONTAL MILL ARBOR milling machine tool holder K&T USA
used nmtb 40 taper-horizontal mill arbor Kearney Trecker USA 41 1/4-B-20 1 1/4" x 25 3/4" long 5/8" drawbar thread please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NMTB 40 TAPER - 1 1/4" STUB MILL ARBOR milling machine tool holder
good used nmtb 40 taper- stub mill arbor mfg not marked- worn on taper 1 1/4" x 8 3/4" long 5/8" drawbar thread FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13e63673d17-0xf9-
|
|
|
Cincinnati Milling Machine Co NMTB-50 Stub Arbor End Mill Holder 1-3/4" Shank
Up for sale here is a Cincinnati Milling Machine Co NMTB-50 Stub Arbor End Mill Holder 1-3/4" Shank. Used in good condition. Feel free to ask any questions. SCT1295
|
|
|
2" ARBOR FACE MILL HOLDER UNIVERSAL KWIK SWITCH 400 SHANK
Universal Engineering Kwik Switch 400 Face Mill Adapter Part Number 801171. 2" Arbor Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $11.50 for USPS Priority Mail shipping with tracking. Thanks for looking! o.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpl%7E3go7%3Eo-13e63bd8dc9-0xf8-
|
|
|
MACHINIST TOOLS LATHE MILL Large Brown & Sharpe # 730 Indicator Stand Holder
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID. I ONLY SHIP VIA PRIORITY. I DO SHIP INTERNATIONALLY BUT WILL NOT LIE ON THE CUSTOMS FORM. THE ITEM WILL BE PUT DOWN FOR WHAT THE ITEM COSTS. AAAA
|
|
|
Universal Eng. 80142 3/8" End Mill Holder Kwik-Switch 100 Taper
Universal Eng. 80142 3/8" End Mill Holder Kwik-Switch 100 Taper. Kwik-switch 100 taper.875"68" 1.44" long, end mill holder 0.375" with one setting screw, Overall length 2.634" Channel through, Used but in good. Complete, functional condition. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
|
|
|
Universal Eng. 80143 1/2" End Mill Holder Kwik-Switch 100 Taper
Universal Eng. 80143 1/2" End Mill Holder Kwik-Switch 100 Taper. Kwik-switch 100 taper.875"68" 1.44" long, end mill holder 0.500" with one setting screw, Overall length 2.883" Channel through, Used but in great. Complete, functional condition. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
|
|
|
Putnam Tool End Mill Holder Weldon Shank Reducer 1.25" 1 1/4" to .3750" 3/8" HR2
SCC MACHINERY. INC. 1869 LINDBERG DR- MUSKEGON. MI 49441 Putnam Tool End Mill Holder Weldon Shank Reducer 1.25" 1 1/4" to.3750" 3/8" HR2 Up for sale we have a good used Putnam tool holder shank reducer. These holders are surplus and no longer needed. Please see below for measurements and dimensions. I am here to answer any questions you may have and please feel free to check out my eBay store for more great machinery and robotics. Putnam Tool 1.25" Weldon Shank. Dimensions- See Picture Above A- 98 B- 1.34. All of our tool holders show normal wear but are in good used condition and ready to put to work. LOC# 033-4. Payment Information We accept PayPal. All major Credit Cards, as well as Business and Personal Checks. VERY IMPORTANT: Please note. We only accept PayPal and Credit Cards on invoices less then $3,000. An ... moreinvoice over $3,000 will need to be paid by Check or Bank Wire. All items are held until payment clears. All Payments must be recieved within one week of auction close. General Shipping Information For packaging 1-149 pounds shipping will be via UPS Ground. Buyers to pay a calulated shipping fee. OUR MISSION STATEMENT AT SCC MACHINERY. INC. WE DO OUR BEST TO BUY AND SELL QUALITY NEW AND PREOWNED EQUIPMENT OF MANY TYPES. WE DO OUR BEST TO DESCRIBE OUR PRODUCTS WITH ALL GOOD AND BAD OF THE ITEMS. WE WILL DESCRIBE TO YOU ANY FLAWS OR DEFECTS TO THE ITEM TO MAKE THE SALE A SUCCESS AND EASE OF PURCHASE TO YOU, OUR CUSTOMER. PLEASE CHECK OUT OUR FEEDBACK LIST, WE EXPRESS TO OUR CUSTOMERS TOTAL SATISFACTION AND IT WILL BE MADE RIGHT TO YOU. Terms and Conditions OUR WARRANTY POLICY FOR ITEMS IS 30 DAYS FROM PURCHASE. BUYER PAYS RETURN SHIPPING OR FRIEGHT. IF YOU HAVE A PROBLEM PLEASE FEEL FREE TO CONTACT US FOR ANY HELP WE CAN EXTEND TO YOU. ON ELECTRICAL ITEMS WE WILL WARRANTY THEM FOR NOT BEING DEAD ON ARRIVAL(DOA) AFTER THE WARRANTY PERIOD, IF SOMETHING SHOULD GO WRONG PLEASE CALL. WE WILL TRY TO HELP YOU WITH A REPLACEMENT PART IF IT IS IN STOCK. Final Closing Statement ITEMS PURCHA
|
|
|
YUASA NMTB40 END MILL HOLDER 1"
YUASA NMTB40 END MILL HOLDER 1"
|
|
|
33 pc LOT of 5C COLLETS lathe mill grinder 5 c work holder tools 1/16" to 1 1/8"
lot of 33 used 5C collets marked Harding. Enco, Yuasa, precision, News, Porst, Etc 3/32. 5/32, 7/32, 9/32, 11/32, 13/32, 15/32, 17/32, 19/32, 23/32, 25/32, 27/32, 29/32, 31/32 and 1 1/32" 1/16. 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1 1/16 and 1 1/8" please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
MADE IN USA CAT 50 3/4" END MILL HOLDER CAT50 MORE LISTED LOT C2338
SquareTrade © AP6.0 LOT#2338 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA CAT50 3/4" DIA. END MILL HOLDER. THIS CAT50 HOLDER IS IN GREAT CONDITION. WE ALSO HAVE MORE CAT50 HOLDERS LISTED. Check out my other items! IF YOU HAVE ANY QUESTIONS EMAIL OR CALL 937-672-9876. Be sure to add me to your. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e66f782a5-0x103-
|
|
|
DAPRA CAT50 3/8" DIA END MILL HOLDER GREAT CONDITION CAT 50 LOT C1932
SquareTrade © AP6.0 LOT#1932 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN JAPAN DAPRA CAT50 3/8" DIAMETER END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! AS ALWAYS, WE WILL COMBINE SHIPPING
|
|
|
MADE IN USA CAT50 1/2" DIA END MILL HOLDER GREAT CONDITION CAT 50 LOT C219
SquareTrade © AP6.0 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A MADE IN USA UNIVERSAL ENGINEERING CAT50 1/2" DIA. END MILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES AS ALWAYS WE WILL COMBINE SHIPPING CHARGES WE ALSO HAVE OVER 500 CAT50 HOLDERS THAT WE WILL BE LISTING GIVE US A CALL AT 937-672-9876 OR 937-320-2298 Check out my! Be sure to add me to your! AS ALWAYS, WE WILL COMBINE SHIPPING
|
|
|
Parlec C50-20EM5 2" CAT-50 V-Flange End Mill Holder 125mm Body Length USA
Up for sale here is a Parlec C50-20EM5 2" CAT-50 V-Flange End Mill Holder 125mm Body Length. Made in the USA. Used in good condition. Feel free to ask any questions. SCT2180
|
|
|
2" Bore CAT-50 V-Flange End Mill Holder w/ 2" x 3" 8-Flute Roughing Mill
Up for sale here is a 2" Bore CAT-50 V-Flange End Mill Holder w/ 2" x 3" 8-Flute Roughing Mill. Used in good condition. Feel free to ask any questions. SCT2179
|
|
|
Parlec C50-20EM7 2" CAT50 V-Flange End Mill Holder 175mm Body Length USA
Up for sale here is a Parlec C50-20EM7 2" CAT50 V-Flange End Mill Holder 175mm Body Length. Made in the USA. Used in good condition. Feel free to ask any questions. SCT2178
|
|
|
Valenite V50CT-E200 2" CAT-50 V Flange End Mill Tool Holder 2" Bore
Up for sale here is a Valenite V50CT-E200 2" CAT-50 V Flange End Mill Tool Holder 2" Bore. Used in good condition. Feel free to ask any questions. SCT2177a
|
|
|
Muskegon Tool Industries B/P 33309-12 CAT50 V End Mill Holder 2" Bore
Up for sale here is a Muskegon Tool Industries B/P 33309-12 CAT50 V End Mill Holder 2" Bore. Used in good condition. Feel free to ask any questions. SCT2176
|
|
|
Valenite V50CT-E125 1-1/4" CAT-50 V Flange End Mill Tool Holder 1-1/4" Bore
Up for sale here is a Valenite V50CT-E125 1-1/4" CAT-50 V Flange End Mill Tool Holder 1-1/4" Bore. Used in good condition. Feel free to ask any questions. SCT2172a.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb%3A%60%3E-13e66f78348-0x102-
|
|
|
Collis 50VF 1.25EM 4.0PRO CAT50 V-Flange End Mill Tool Holder 1-1/4" Bore
Up for sale here is a Collis 50VF 1.25EM 4.0PRO CAT50 V-Flange End Mill Tool Holder 1-1/4" Bore. Used in good condition. Feel free to ask any questions. SCT2171a
|
|
|
Valenite CAT50 V-Flange End Mill Tool Holder 1" Bore V50CT-E100
Up for sale here is a Valenite CAT50 V-Flange End Mill Tool Holder 1" Bore V50CT-E100. Used in good condition. Feel free to ask any questions. SCT2169
|
|
|
Sandvik Coromant CAT50 V-Flange End Mill Tool Holder 20mm Bore CAT-50
Up for sale here is a Sandvik Coromant CAT50 V-Flange End Mill Tool Holder 20mm Bore CAT-50. Used in good condition. Feel free to ask any questions. SCT2168
|
|
|
CAT50 V-Flange Extra Long 1-1/4" End Mill Tool Holder 16" Long Body CAT-50
Up for sale here is a CAT50 V-Flange Extra Long 1-1/4" End Mill Tool Holder 16" Long Body CAT-50. Unbranded. Used in good condition. Feel free to ask any questions. SCT2167a
|
|
|
COMMAND CAT50 END MILL HOLDER C6E4-0750
COMMAND CAT50 END MILL HOLDER C6E4-0750 3/4" WITH 4" PROJ.
|
|
|
LOT OF 2 TAPER BT45 LATHE COLLET MILL HOLDER CHUCK TOOLING MILLING CUTTING O3
THIS IS A LOT OF 2 TOOL HOLDERS.I BELIEVE THEY ARE BT45,THEY ONE SAYS LYNDEX JAPAN AND THE OTHER SAYS TECHLEADER 1144 BT45 TG100 1CO SOLD AS IS.PLEASE SEE MY OTHER AUCTIONS.
|
|
|
NIKKEN End Mill Holder BT45-JTA6-45 Stock #0741 w/Retention knob
Nikken End Mill Holder BT45-WE 3/4-85 Part# BT45-JTA6-45 6 Taper Jacobs Chuck*Includes retention knob* Used in Excellent conditon! Have 3 available
|
|
 |