|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature: Head Size 2"; Shank Taper 3MT. Shank To Head 7/8"~20; Boring Bar 1/2"/9pc. Boring Head: Bar holder moves freely and smoothly. Design assures ... moresuperior rigidity for chatter-free boring and precise hole size accuracy. Hardened and Ground adjusting screw designed for long lasting and trouble free use. Tool Capacity Up to 1/2". Tool Capacity Up to 1/2". Description:.
Buy It Now
Free Shipping Condition: New Location: Mentor, United States All our bars are made with the industry standard rockwell steel. Not too hard, not too soft. INSERT NOT INCLUDED. We describe our tooling as it is, we ... moredo not hide anything. All of our bars are manufactured right here in OHIO .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 2" Boring Head With R8 Shank Head size: 2" Boring bar Hole: 1/2" Cross Hole Dia: 1/2" Maximum Offset: 5/8" Thread: 1.5"-18 Graduations: 0.001/0-50 Center ... moreDistance bt 2 bottom hole: 0.60" With R8 Shank A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting When the direction of the dial is reversed, the backlash between the gear train is listed below..
Buy It Now
$54.00 Shipping Condition: Used Location: Huntington, United States Good used condition. Please see all photos
Buy It Now
$12.45 Shipping Condition: Used Location: North Ridgeville, United States LOT of 7 VARIOUS MACHINIST BORING BARS/ GROOVING TOOLSBrazed carbide, HSS, 1 diamond tip, and 1 heavy metal insert barSee photos
Buy It Now
$12.50 Shipping Condition: Used Location: Coloma, United States 1" VDI30 BORING BAR HOLDER.
Buy It Now
Free Shipping Condition: New Location: Dickinson, United States NOTE: Actual shank length may be between 5.00" and 5.50" OAL. This concept makes it possible for us to provide high quality at highly competitive prices. ... moreHigh performance at a bargain price. When internal machining, the limiting factor on CNC turning centers or multi-task machines is often therigidity (or lack thereof) of the boring bar.
Buy It Now
$9.50 Shipping Condition: Used Location: Alpine, United States Previously owned Iscar indexable boring bar in what looks to be very good condition. Purchased in an auction lot. I am not a machinist but it seems to ... morebe in very good condition. Sale includes 5 new extra cutters and 6 cutter hold screws. Buyer pays shipping.
Buy It Now
Free Shipping Condition: Used Location: Oxnard, United States
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States SHARS 1PC Internal V Partial Profile IR16 AG60 424-1432. THREADING HOLDER CATEGORY Internal Boring Bars. MODEL STYLE - THREADING HOLDER SIR-0500-P16-1/2. ... moreFree 1 PC Tin Coat Insert. center to insert cutting edge f 0.39.
Buy It Now
Free Shipping Condition: New Location: United States [S20R－MWLNR08 boring bar]: The turning tool bar is made of high-quality alloy steel with Nickel Cotated, good toughness, high hardness, strong wear resistance, ... moredurable. [Product specifications]: Cutter direction:Positive cutter, right.
Buy It Now
Free Shipping Condition: New Location: New York, United States 5 、 About the inserts:IR--Internal left hand inserts / ER- External right hand inserts.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: 2" Boring Head With R8 Shank Head size: 2" Boring bar Hole: 1/2" Cross Hole Dia: 1/2" Maximum Offset: 5/8" Thread: 1.5"-18 Graduations: 0.001/0-50 ... moreCenter Distance bt 2 bottom hole: 0.60" With R8 Shank Features: A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting When the direction of the dial is reversed, the backlash between the gear train is listed below..
Buy It Now
$10.95 Shipping Condition: New Location: Tullahoma, United States
Buy It Now
$10.95 Shipping Condition: Used Location: Tullahoma, United States This boring head is in good, used condition.
Buy It Now
Free Shipping Condition: New Location: Fort Lauderdale, United States 1/2 SHANK INDEXABLE. Min boring 3/8". Max Boring 3". We will work with you to resolve any problem you may have. Add To Favorites. Weight: 2.36 lb.
Buy It Now
Free Shipping Condition: New Location: New York, United States • Shank length: 125mm. • Direction: Right hand.
Buy It Now
$9.00 Shipping Condition: New Location: Irvine, United States (TBGT09 TPGT1103 ). 6PCS 1/2 INDEXABLE BORING BAR. INDEXABLE NO BORING RANG BORING DEPTH INSERTS BORING AP BORING FEEDmm/rev CUTTING SPEEDm/min WRENCH. ... moreBJ1210-40 10 -13 40 TBGT0601 0.07-0.25 0.05-0.010 100-200 T6.
Buy It Now
Free Shipping Condition: New Location: Galena, United States New R8 Boring Head Shank 7/8"20 Thread New Boring Head Shank Wrapped In Box Thread: 7/8-20 Acquired In An Overstock Auction Auction Sales Policy: ... moreYour bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction or if payment is not received within 5 days, item may be offered to the next highest bidder or relisted at the seller's sole discretion. Shipping Details: Shipment will be either USPS. UPS, FedEx. Some larger items will ship via UPS Ground service. Orders are generally shipped on the day after payment is received. Payment Details: PayPal is our preferred method of Payment Returns: In the unlikely event that a return is requested. All returns must include all original items undamaged, in re-saleable condition, all original packaging including manuals, warranty forms, etc. Shipping and handling fees are not refundable. Buyer is responsible for shipping costs incurred shipping products back. Contact: The winner will receive an"eBay End of Auction" email. Click on the payment link and follow instructions. Once payment is received. We will ship your item. Questions? Please contact us through eBay Privacy Policy: Rest assured your information will not be given. Sold, rented or loaned to any third party. Feedback: If for whatever reason you were not completely satisfied. Please contact me and give me a chance to earn your 5 Star Positive Feedback before leaving me any negative feedback. I will never knowingly try to mislead you in any way. I do my best to describe everything I sell but I'm not perfect. People do have differences of opinion. I really do take pride in my feedback and try to keep it as perfect as possible. Be sure to add me to your! Check out my other items! Sign up for PayPal; the fast. Easy, and secure way to pay online.
Buy It Now
Free Shipping Condition: New – Open box Location: Greenwood, United States Boring Bar Sleeve M2122 OD-1.0"; ID-0.50"; overall length 2.75"; set screws M8-1.0x6mm.
Buy It Now
$10.40 Shipping Condition: New Location: Chino, United States Why should you buy from us? We exceed Ebay's standards for quality and service. We are an Ebay Star Seller and have over 16.000 unbiased positive ... morefeedback from unique Ebay buyers. Get It Quick! We ship 97% of all in-stock orders within 1 business day! AIR. POWER& HAND TOOLS CUTTING& CARBIDE TOOLS MACHINE TOOL ACCESSORIES MRO& SHOP SUPPLIES PRECISION MEASURING TOOLS Thank you for shopping with us! Description Shipping Payment Return Policy Our products carry a one year warranty and combined shipping is available. Please use Buy it Now and commit to purchasing the items you need without paying. Contact us when you are done and we will send you a combined invoice with the cheapest shipping rate we can find for you. 3/8" Shank S-SCLCR6-2 Indexable Boring Bar With Insert 7° Relief angle. Negative 5° Lead angle for boring. 3° Side& end cutting edge angle. Torx wrench T-8 included. Utilizes CCMT-21.5 80° diamond inserts. CCMT insert included. Replacement Inserts are the CCMT-21.51(6003-5021) Dimension style S06M-SCLCR2 Set/Style B Diameter x Overall Length 3/8 x 6" Minimum Bore.500" Screw size is M2.5 X 8 This is a profiling bar for semi-finishing and finishing operations. Combined Shipping Available- Please use Buy it Now and commit to purchasing the items you need without paying. Contact us when you are done and we will send you a combined invoice with the cheapest shipping rate we can find for you. For freight shipments. Please contact us with your complete delivery address including the zip code for an accurate quote prior to your purchase. PayPal is preferred for immediate shipping. We also accept major credit cards including Master Card. Visa, Discover and American Express. To pay with a credit card without using Paypal. Please contact us and provide us with your phone number. We will call you to get your payment information. Return policy details: Please email us for a Return Authorization prior to returning merchandise. All items must be in original packagin
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States THREADING GROOVING CATEGORY Boring Bars. Clamp #: TNSN-3B. Fully interchangeable with other similar "notch" type tools and inserts. center to insert cutting ... moreedge f 0.688. CUTTING DIRECTION Right Hand.
Buy It Now
Free Shipping Condition: New Location: Dickinson, United States This concept makes it possible for us to provide high quality at highly competitive prices. High performance at a bargain price.
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States INSERT STYLE CCGX, CCMT. Positive 80 degree diamond CCMT inserts. MODEL STYLE - BORING BAR S-SCLCR8-3. INSERT SIZE 32.51, 32.52. Easy reference guide ... morefor insert number, screw, and other accessories is printed on the tool shank.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description: 2" Boring Head With R8 Shank Head size: 2" Boring bar Hole: 1/2" Cross Hole Dia: 1/2" Maximum Offset: 5/8" Thread: 1.5"-18 Graduations: 0.001/0-50 ... moreCenter Distance bt 2 bottom hole: 0.60" With R8 Shank A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting When the direction of the dial is reversed, the backlash between the gear train is listed below..
Buy It Now
Free Shipping Condition: New Location: Dickinson, United States This concept makes it possible for us to provide high quality at highly competitive prices. High performance at a bargain price.
Buy It Now
$7.75 Shipping Condition: New Location: Huntington Beach, United States | | | | | | | Our part# ALL-19900, Made of precision ground. High grade tool steel. Set contains(4) 1/2" diameter(round shank) boring bars: 1 pc- ... more1/2" diameter boring bar x 7/16" minimum bore x 1-1/4" bore depth x 2-3/4" overall, 1 pc- 1/2" diameter boring bar x 7/16" minimum bore x 2-1/8" bore depth x 3-5/8" overall, 1 pc- 1/2" diameter boring bar x 1/2" minimum bore x 1-1/2" bore depth x 3" overall, 1 pc- 1/2" diameter boring bar x 1/2" minimum bore x 2-1/2" bore depth x 4" overall, TCMT 21.51 Carbide inserts included. Replacement inserts are in our store(see link below) Positive rake 90° lead. Supplied with wrench, Great deals on more boring bars. Inserts, and more lathe/mill tooling in the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships from USA- same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote New machine or tooling up for a big job? Contact us for best pricing guarantee! 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will be shipped within 1-2 business days after full payment is received(same day if possible) For international
Buy It Now
$11.00 Shipping Condition: New Location: Mentor, United States All our bars are made with the industry standard rockwell steel. Not too hard, not too soft. All of our bars are manufactured right here in OHIO .
Buy It Now
Free Shipping Condition: New Location: China Continuously updating all aspects of hardware and tool products.
Buy It Now
$18.00 Shipping Condition: Used Location: West Covina, United States Model #: VPB PC6-4615. Shank Connection: PC6. This is a used Twin Cutter Roughing Boring Head in GREAT condition. Doesn't include insert holders. Made ... morein the U.S.A. by Valenite. Boring Range: 2.61" to 3.50".
Buy It Now
$10.95 Shipping Condition: New Location: Tullahoma, United States
Buy It Now
$10.95 Shipping Condition: New Location: Tullahoma, United States
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description: 2 inch boring head, With MT2 shank(end thread 3/8-16) The carbide tipped 9-piece boring bar set includes three different length boring bars ... moreeach for minimum bores of 5/16", 7/16", and 9/16". The bore depth ranges from 3/4" to 3". The heat treated, alloy steel shanks are hold to 0.000 to -0.0005" from the nominal diameter. Bar holder moves freely and smoothly. Design assures superior rigidity for chatter-free boring and precise hole size accuracy. Hardened and Ground adjusting screw designed for long lasting and trouble free use. Features:.
Buy It Now
$8.00 Shipping Condition: New Location: Eagle Point, United States 3/4" Boring Bar X 4 1/2" Long Extend range of your boring head and create flat shoulders. Actual size: 748 Dia. X approx. 4.5" long. Flats ... moretop and bottom.700 across flats) Made from heat treated tool steel with black oxide coating. Comes with one TPGB 321 C5 carbide insert. And one 4-40 torx screw. Can use any similar insert. BORING HEAD NOT INCLUDED WITH SALE! All tools made here in So. Oregon. Inserts are quality imports.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature: Head Size 2"; Shank Taper 3MT. Shank To Head 7/8"~20; Boring Bar 1/2"/9pc. Boring Head: Bar holder moves freely and smoothly. Design assures ... moresuperior rigidity for chatter-free boring and precise hole size accuracy. Hardened and Ground adjusting screw designed for long lasting and trouble free use. Tool Capacity Up to 1/2". Tool Capacity Up to 1/2". Description:.
Buy It Now
$10.00 Shipping Condition: New Location: China
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Good precision, high cutting efficiency. Wear resistant and deform resistant. Direction: right hand. 1 Lathe Turning Tool Kit.
Buy It Now
$13.15 Shipping Condition: New Location: Duncan, United States Style for 1-1/2"-18 Boring Heads. Taper B&S #9 with Draw Bar. Thread Size 1/2"-13.
Buy It Now
$10.95 Shipping Condition: Used Location: Tullahoma, United States Shank Dia: 3/8". This bar is in great condition and has been shortened to 5". Insert Type: CCMT 060204.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States 50mm boring facing head Bore range:60mm-220mm Suitble for: TDG50 Portable line boring machine/50mm diameter Boring Bar.
Buy It Now
Free Shipping Condition: New Location: Clinton, United States
Buy It Now
$10.95 Shipping Condition: New Location: Tullahoma, United States Shank Dia: 3/8". Insert Type: CC 2151.
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States INSERT STYLE CNMG. Negative 5 degree end or side cutting edge angle for 80 degree CNMG 43X insert. MODEL STYLE - BORING BAR S12S-MCLNR-4. INSERT SIZE ... more431, 432, 433. Easy reference guide for insert number, screw, and other accessories is printed on the tool shank.
Buy It Now
$8.00 Shipping Condition: New Location: Eagle Point, United States Heavy Duty! Interrupted cuts are no problem. Boring head is not included in sale. Reduces chatter, improves accuracy. Boring head is not included in sale. ... moreBoring head is not included in sale.
Buy It Now
Free Shipping Condition: New Location: Madison Heights, United States aims PRECISION 3/8" ADJUSTABLE BORING HEAD SET w/ 1/2" SHANK read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM ... more1:00 PM TO 4:30 PM PST This is a Precision Adjustable Boring Head Set in good condition. Set Includes: 1/2" Shank Boring Bars/ Bits& Allen Wrench. Specifications: Capacity: 3/8" Head Diameter: 2" Head Length: 1-3/4" Shank: 1/2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PRECISION 3/8" ADJUSTABLE BORING HEAD SET w/ 1/2" SHANK PRECISION 3/8" ADJUSTABLE BORING HEAD SET w/ 1/2" SHANK PRECISION 3/8" ADJUSTABLE BORING HEAD SET w/ 1/2" SHANK Reliable Tool Inc. c 2011 | Powered by g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13f7131d8f2-0xed-
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States INSERT STYLE CNMG. Negative 5 degree end or side cutting edge angle for 80 degree CNMG 43X insert. MODEL STYLE - BORING BAR S12S-MCLNL-4. INSERT SIZE ... more431, 432, 433. Easy reference guide for insert number, screw, and other accessories is printed on the tool shank.
Buy It Now
$15.50 Shipping Condition: New Location: Saint Charles, United States Shars High Precision 3" Boring Head ø 0.001 1-1/2-18 Thread W/Certificate New. Compared to the generic boring head on the market, the tight thread fit ... moreon the main lead screw leads to 10 graduations in backlash while the other generic model has around 20 graduations.
Buy It Now
Free Shipping Condition: New Location: Dickinson, United States C16-MCLNR4 (CNMG 432) 1" x 6.75" OAL No Coolant. This concept makes it possible for us to provide high quality at highly competitive prices. High performance ... moreat a bargain price.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Lathe Boring Bar Turning Tool Holder Carbide Inserts With WNMG080404 10PCS Boring bar made of high quality steel, heat treated and Black surface, corrosion ... moreresistant. Boring bar diameter 16mm, total length 179mm. The insert is made of Mitsubishi carbide insert. Cutting edge R0.4. Surface coating treatment. Can machine steel, cast steel, and stainless steel. Items include S16Q-MWLNR08 1PCS WNMG080404-MA 10PCS.
Buy It Now
Free Shipping Condition: New Location: New York, United States • Shank length: 125mm. • Direction: Right hand.
Buy It Now
Free Shipping Condition: New Location: Dickinson, United States This concept makes it possible for us to provide high quality at highly competitive prices. High performance at a bargain price. When internal machining, ... morethe limiting factor on CNC turning centers or multi-task machines is often therigidity (or lack thereof) of the boring bar.
Buy It Now
Free Shipping Condition: New Location: Lake in the Hills, United States Neck Down style Boring Bar Sleeves are designed with a reduced neck for better reach in tight applications. They are used universally to adapt all boring ... morebar or shank type tools to any CNC turning machine or machining center as extensions.
Buy It Now
$8.50 Shipping Condition: New Location: Huntington Beach, United States | | | | | | | All Industrial part# ALL-11926, 12 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum ... moreand other soft metals, All shanks are held to 0.0000-0.0005" from the nominal diameter and made of special heat treated alloy steel, Shank Diameter- 3/4" Minimum Boring Range: 7/16" 13/16" see below) Overall Length: 3-1/8" to 6-1/2" see below) Boring Depth Range: 1-1/8" to 4-1/2" see below) Contains(3) pcs. 7/16" minimum bore(1 ea. 1-1/8" bore depth x 3-1/8" overall. 1 ea. 1-11/16" x 3-11/16" 1 ea. 2-1/4" x 4-1/4" Contains(3) pcs. 9/16" minimum bore(1 ea. 1-1/2" bore depth x 3-1/2" overall. 1 ea. 2-1/4" x 4-1/4" 1 ea. 3" x 5" Contains(3) pcs. 11/16" minimum bore(1 ea. 1-7/8" bore depth x 3-7/8" overall. 1 ea. 2-13/16" x 4-13/16" 1 ea. 3-3/4" x 5-3/4" Contains(3) pcs. 13/16" minimum bore(1 ea. 2-1/4" bore depth x 4-1/4" overall. 1 ea. 3-1/8" x 5-3/8" 1 ea. 4-1/2" x 6-1/2" We combine shipping! Complete the buy it now and we'll send you a combined shipping invoice to pay from, For additional sizes and great pricing on boring bar holders visit the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships from USA- same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote New machine or tooling up for a big job? Contact us for best pricing guarantee! 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and a
Buy It Now
Free Shipping Condition: New Location: Saint Charles, United States BORING HEAD CATEGORY Boring Heads. Compared to the generic boring head on the market, the tight thread fit on the main lead screw leads to 8 graduations ... morein backlash while the other generic model has around 10 graduations.
Buy It Now
$11.80 Shipping Condition: New Location: Saint Charles, United States SHARS 1/2" SHANK S08R-TNER2 NOTCH S-NE THREADING AND GROOVING BORING BAR +CERTIFICATE NEW. THREADING GROOVING CATEGORY Boring Bars. Fully interchangeable ... morewith other similar "notch" type tools and inserts.
Buy It Now
$25.59 Shipping Condition: New Location: Chino, United States HHIP 2" Boring Head Kit with R8 Shank, Boring Bars & Fly Cutter. The R8 shank provides secure and stable tool holding and fits Bridgeport-type mills. ... moreThe boring head has a threaded back for the shank ensuring a secure fit.
Buy It Now
Free Shipping Condition: New Location: Dickinson, United States E16-MDUNR4 (DNMG 432) 1" x 6.50" OAL With Coolant. This concept makes it possible for us to provide high quality at highly competitive prices. High performance ... moreat a bargain price.
Buy It Now
Free Shipping Condition: New Location: Dickinson, United States This concept makes it possible for us to provide high quality at highly competitive prices. High performance at a bargain price. When internal machining, ... morethe limiting factor on CNC turning centers or multi-task machines is often therigidity (or lack thereof) of the boring bar.
Buy It Now
$15.10 Shipping Condition: New Location: Avon, United States ISCAR GEHIUR 12.7U Boring Bar .551" Min. Bore Dia. Right Hand Cut .50" Shank Dia. 45°Lead Angle 5.00 OAL Uses GPEI Inserts
Buy It Now
$10.95 Shipping Condition: Used Location: Tullahoma, United States Shank Dia: 1/2". This bar is in good, used condition. Insert Type: CC 2151.
|
|
|
|
VERMEER LM-35 TRENCHER CABLE PLOW COMBO BORING ATTACHMENT VIBRATORY BLADE
VERMEER LM-35 TRENCHER COMBO VIBRATORY CABLE PLOW/ TRENCHER. SET UP FOR A BORING ATTACHMENT(SEE PICTURE) 2 CYLINDER DUETZ DIESEL ENGINE AIR COOLED MODEL F2L511. SHOWS 142 HRS ON METER(UNSURE IF THAT IS ACTUAL) RUNS AND STARTS UP VERY GOOD. VIBRATORY PLOW WORKS VERY GOOD. NO LEAKS SEEN. BLADE IS APPROX 30" LONG. TRENCHING BAR IS 4FT LONG(HAS ALL NEW CUP TEETH AND LIKE NEW FROST&ROCK TEETH) THE TEETH ARE STAGGERED CUPP AND CARBIDE ROCK TEETH. HI- LOW GROUND TRAVEL SPEED. ARTICULATES. TIRES ARE LIKE NEW 23X10.50-12 V BAR TIRES. SUITCASE WEIGHTS. MACHINE IS APPROX 4-1/2' TALL- 5-1/2' TALL TO TOP OF TRENCHER BLADE. 4 FT WIDE. 13-14FT LONG FROM END OF BLADE TO END OF TRENCHER. CLICK ON LINK BELOW TO SEE THE TRENCHER RUN. ANY ADDITIONAL QUESTIONS PLEASE ASK. OR CALL RYAN OR TIM AT 724-887-9375 THANK YOU FOR YOUR BUSINESS*ATTENTION ... moreBUYER* ALL ITEMS SOLD AS-IS. WHERE-IS*ALL SALES FINAL* EQUIPMENT SOLD WITH A BILL OF SALE* ALL SHIPPING COSTS WILL BE COVERED BY THE BUYER. SELLER WILL LOAD PURCHASED EQUIPMENT AT NO CHARGE TO THE BUYER. SELLER WILL ALSO HOLD THE ITEM UP TO 30 DAYS AT NO CHARGE TO THE BUYER. THE BEST PLACE TO GET SHIPPING QUOTES IS FROM FREIGHTQUOTE.COM OR USHIP.COM· WE DO HANDLE SOME LOCAL DELIVERIES. WITH-IN OUR AREA. ANYONE WHO CARES TO HANDLE SHIPPING WITH THEIR LOCAL COMPANIES OR AFFILIATES ARE WELCOME TO DO SO. PICK UP CAN BE ARRANGED ANYTIME THROUGH OUT THE DAY BY PRE- ARRANGING IT WITH US. ANYONE IS WELCOME TO COME TO OUR PHYSICAL LOCATION TO TEST OUT ANY OF OUR EQUIPMENT FOR SALE. WE ARE LOCATED AT 1 WEDDING LANE MOUNT PLEASANT. PENNSYLVANIA 15666, APPROX 48 MILES SOUTHEAST OF PITTSBURGH, IN THE SOUTHWESTERN PART OF THE STATE· PENNSYLVANIA SALE TAX IS 6% IF YOU PICK UP EQUIPMENT AT OUR YARD. UNLESS TAX EXEMPT, YOU MUST PAY SALES TAX. IF EQUIPMENT IS SHIPPED OUT OF STATE. THEIR WILL BE NO SALES TAX· ANY QUESTIONS CONTACT US AT 724-887-9375
|
|
|
CAT 40 BORING HEAD DUAL INDEXABLE CUTTERS SANDVIK 1.5" HOLDER
CAT 40 BORING HEAD DUAL INDEXABLE CUTTERS SANDVIK 1.5" HOLDER. Custom made for a short run job. This came from a small shop who's owner retired. This will ship USPS flat rate priority at $11.35. No Reserve Auction. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13e04c91480-0xf6-
|
|
|
Boring-Smith Anvil Pruner Shears
Boring-Smith Anvil Pruner Shears 100% Guaranteed! Shipping is $6 f rom Indiana for Continental United States. Alaska and Hawaii will be extra. Please email for shipping quote. Local pick-up is always welcome. No international shipping. You can expect very quick shipping and careful packaging. Our primary concern is your satisfaction. We want you as a return customer. Check out our feedback comments. Thank you very much for looking! Please let me know if you have any questions
|
|
|
1940s UNIVERSAL BORING MACHINE CO. BORING MILLS BROCHURE & ACCESSORIES CATALOG
5 DAY AUCTION! 19 40s UNIVERSAL BORING MACHINE CO. BROCHURE/CATALOG 2 PCS 1946 HORIZ BORING MILLS BROCHURE 4" 5" MODELS. 12 PGS 1941 EXTRA EQUIPMENT ACCESSORIES CATALOG. 12 PGS YOU ARE BIDDING ON ORIGINAL LITERATURE UNLESS OTHERWISE STATED S&H IS $6.50 USPS PRIORITY MAIL. EACH ITEM IS SAFELY PACKED WITH CARDBOARD INSERT ALL INVOICES MUST BE PAID WITHIN 3 BUSINESS DAYS IF YOU HAVE ANY QUESTIONS REGARDING PAYMENT PLEASE EMAIL ME INTERNATIONAL BIDDING REQUIRES APPROVAL PLEASE DO NOT ASK TO BUY A PHOTOCOPY DURING OR AFTER AUCTION. COPIES ARE NOT AVAILABLE I DO SEND 2ND CHANCE OFFERS ON OCCASION IF I HAVE DUPLICATES. EMAIL ME TO VERIFY I SENT IT IF YOU'RE NOT SURE IT CAME FROM ME. IF YOU DON'T WANT TO RECEIVE 2ND CHANCE OFFERS YOU MIGHT WANT TO USE THE EBAY FEATURE THAT WILL ALLOW YOU TO'OPT-OUT' OF RECEIVING 2ND ... moreCHANCES FROM SELLERS. BUYER CAN COMBINE SHIPPING ON MULTIPLE PURCHASES. IF YOU BUY 1 COST IS $6.50. IF YOU BUY MULTIPLE ITEMS COST WILL STILL BE ONLY $6.50 TOTAL. SHIPPING COSTS ONLY INCREASE ON MULTIPLE PURCHASES IF YOUR ORDER CAN'T FIT IN A PRIORITY MAILER AND HAS TO BE PACKED OTHERWISE. SHIPPING& HANDLING CHARGES ARE NOT NEGOTIABLE. EVERYBODY PAYS THE SAME.
|
|
|
Lathe Tool Lot, Boring Bars, Turning tools, Carbide 3/4"-1" 16 pieces
I have a lot of machinist lathe tools for sale. There are boring bars ranging from 3/4" to 1" They are in good condition with no significant damage to the carbide. The boring bars have plastic cases. Some with caps, some without. There is also another set that has a nice wood case. The second photo shows 3/4 Carbide tipped lathe turning tools, these are also in good shape. Ruler Not included Thanks for looking
|
|
|
Large boring type tools for lathes, borers etc
Large boring type tools for lathes. Borers etc These heavy boring bars use round tool steel tips. Diameters are 3/4" 1" and 1 1/8" longest is 10" Payment to be received within 7 days. Unless you request us to hold the item for you. If you would like us to hold the item more than 7 days we would prefer you to pay(without postage) PLEASE DO NOT ASK FOR THE CORRECT POSTAGE. The correct postage is shown automatically on your screen depending upon where you are. We always combine lots for the cheapest postage, if you win more than one lot, it will normally be reassessed and invoiced on Monday. Items are posted within 2 working days of payment.
|
|
|
Vermeer LM 25 Cable Plow Trencher Boring Setup
You are viewing a hard to find Vermeer LM 25 Commercial Cable Plow. Trencher and Bore attachment. The unit has no boring rods or bits. The unit has only 761 hrs. Its in great operating condition. Ready to go to work. The vibratory cable plow will go to deep. I was told this unit went into service in 2006. I was told the blade is a custom setup. Look at the Pics they best describe this unit! The unit is powered by a 25 hp Kohler Engine. This unit is good running unit. Everything works. Hydrostatic drive. The rest of the unit is all hydraulic operated. This Vermeer was used to install sprikler lines. The unit is tight, and well cared for. The paint is faded, spots of rust no damage. The battery panel has a slight bend. All the safteys have been by passed. The tires are about 50% This Vermeer cost about $25.000.00 new. This unit is built by ... moreVermeer. You may want out Check their web site. Getting parts is not a problem. This unit weight is about 3000 lbs. Item is located in Fort Myers FL 33901- buyer is responsible for shipping charges- I can help arrange shipping if needed. I can also load. Cost to ship.75 to $1.00 per mile. Cost to del. to Maimi for export $350.00. Cost ship Overseas in a 20 ft shipping container aproximate based on country- port of entry. $2000.00 to $3000.00. I will hold Mower here for pick up for up to 30 days. However the bid must be paid in 5 days. We sell guality equipment. We tell it the way it is. We take close up pics. Post at least 10 pics, and let the buyer enlarge the pic. Reason we have nothing to hide, we sell quality! Not afraid to show the buyer what he is buying. I feel we have placed a fair reasonable price on this tractor. Please feel free to call me. we are open to disscussions. No FL sales tax collect from items shipped out of the state. A NOTE ABOUT SHIPPING! If we sell you an item and you have a problem with the freight company. This is not our problem, it is yours. 99% of the time there is never a problem. However 1% of the time there is going to be a problem. Th
|
|
|
2004 Ring O Matic Jet Vac 550 Vermeer Ditch Witch Directional Drill, Boring
Stock# 12-436 Available is a 2004 Ring O Matic Jet Vac. Drill shows 889 hours on meter. DIAHATSU DIESEL RECENT SERVICE TO ENGINE AND BLOWER NEW WATER PRESSURE PUMP 550 GALLON SPOILS TANK 300 GALLON FRESH WATER TANK HYDRAULIC DUMP AND GATE ANTIFREEZE SYSTEM TANDEM AXEL TRAILER SLIGHT BEND IN TRAILER TOUNGUE. STILLS TOWS GOOD NEW SUCTION HOSES. Runs strong. Inpection of equipment is welcome and available by appointment. Please contact. Equipment sold"As Is" Financing Assistance Available. Please contact. We reserve the right to end this listing early as it is for sale elsewhere. Buyer responsible for all shipping costs. We can load this equipment and provide shipping quotes. MI residents subject to 6% sales tax. Questions please contact. Norton Equipment Sales 810-660-7238
|
|
|
2008 DITCH WITCH JT8020 MACH 1 DIRECTIONAL DRILL BORING MACHINE
2008 Ditch Witch JT8020 Mach 1 Directional Drill-RUBBER TRACKS- FMC WATERPUMP- Approximately 720 feet DRILL STEM- ENCLOSED CONSOLE- 4.300 HOURS- CRANE- Ref. No: BORE1186 Year: 2008 Make: Ditch Witch Model: Ditch Witch JT8020 Mach 1 Engine: Horse Power: Hours: 4300 Operating Weight: Description: 2008 Ditch Witch JT8020 Mach 1 Directional Drill. Rubber Tracks. FMC Waterpump, Enclosed Cab. Crane, 261 hp Deutz Diesel. 4- Rod Racks With Rod- Approximately 720 feet Here at MTI Equipment we buy and sell directional drills and have done so for over 25 years. We are experienced in all aspects of directional drill repairs and have"seen it all" This rig will be sold ready to work with our highly trained staff and mechanics inspecting and repairing this rig. We drill with every rig that leaves our yard using every function and testing all pressures. ... moreWe try our hardest to ensure you are getting a machine that will be"turn-key" You are welcome to our facility to drill with this or any other rig you might be interested in. We offer full onsite training for you and your staff free of charge- call for more details. PLEASE NOTE: SUBSITE ELECTRONICS ARE AVAILABLE AT ADDITIONAL COST AND NOT INCLUDED IN THE PRICE* Why buy your directional drill from MTI Equipment? Full selection of support equipment- New or used locators/ trailers/ mud systems/ trucks/ new or used tooling- Financing available- Spanish and English speaking staff- Free truck loading/ container loading- After sale support-
|
|
|
2011 DITCH WITCH JT100 MACH 1 DIRECTIONAL DRILL BORING MACHINE - Rack and Pinion
2011 Ditch Witch JT100 Mach 1 Directional Drill-RUBBER TRACKS- FMC WATERPUMP- Approximately 1.080 feet DRILL STEM- ENCLOSED CONSOLE- 1518 HOURS- Rack and Pinion- CRANE- Ref. No: BORE48 Year: 2011 Make: Ditch Witch Model: Ditch Witch JT100 Mach 1 Engine: Deutz BF6M1013ECP Horse Power: 268 Hours: 1518 Operating Weight: 43.500 Pull Back: 100.000lbs Thrust: 70.000lbs Rotational Torque: 12.000 ft-lbs Drill Pipe Diameter: Length of Drill Pipe: 15' 14' 8 Drill Fluid Flow Rate: Width: 8'5 Height: 9'2. Description: 2011 Ditch Witch JT100 Mach 1 Directional Drill. Rubber Tracks. Drill Stem, Rack& Pinion Carriage Drive, FMC Waterpump. This machine just arrived and is in excellent condition. Call to schedule a demo today! Description: 2011 Ditch Witch JT100 Mach 1 Directional Drill. Rubber Tracks. Drill Stem, Rack& Pinion Carriage ... moreDrive, FMC Waterpump. This machine just arrived and is in excellent condition. Call to schedule a demo today! Here at MTI Equipment we buy and sell directional drills and have done so for over 25 years. We are experienced in all aspects of directional drill repairs and have"seen it all" This rig will be sold ready to work with our highly trained staff and mechanics inspecting and repairing this rig. We drill with every rig that leaves our yard using every function and testing all pressures. We try our hardest to ensure you are getting a machine that will be"turn-key" You are welcome to our facility to drill with this or any other rig you might be interested in. We offer full onsite training for you and your staff free of charge- call for more details. PLEASE NOTE: SUBSITE ELECTRONICS ARE AVAILABLE AT ADDITIONAL COST AND NOT INCLUDED IN THE PRICE* Why buy your directional drill from MTI Equipment? Full selection of support equipment- New or used locators/ trailers/ mud systems/ trucks/ new or used tooling- Financing available- Spanish and English speaking staff- Free truck loading/ container loading- After sale support-
|
|
|
2008 Vermeer D100x120 Series 2 HDD DIRECTIONAL DRILL BORING MACHINE Enclosed Cab
2008 Vermeer D100x120 Series 2 Directional Drill-STEEL TRACKS- KERR WATER PUMP- APPROXIMATELY 1.200 FEET DRILL STEM- 4.883 HOURS- Ref. No: BORE1237 Year: 2008 Make: Vermeer Model: Vermeer D100X120 Series 2 Engine: Horse Power: Hours: 4883 Operating Weight: Description: 2008 Vermeer D100X120 Series 2 Directional Drill. 4883 Hours. Enclosed Cab, MFD Display In Console, Steel Tracks, John Deere Diesel Engine, SC-170L Aplex Waterpump. Approximately 1200 Feet Of Drill Stem. Here at MTI Equipment we buy and sell directional drills and have done so for over 25 years. We are experienced in all aspects of directional drill repairs and have"seen it all" This rig will be sold ready to work with our highly trained staff and mechanics inspecting and repairing this rig. We drill with every rig that leaves our yard using every function and testing ... moreall pressures. We try our hardest to ensure you are getting a machine that will be"turn-key" You are welcome to our facility to drill with this or any other rig you might be interested in. We offer full onsite training for you and your staff free of charge- call for more details. Why buy your directional drill from MTI Equipment? Full selection of support equipment- New or used locators/ trailers/ mud systems/ trucks/ new or used tooling- Financing available- Spanish and English speaking staff- Free truck loading/ container loading- After sale support-
|
|
|
2002 DITCH WITCH JT7020 MACH 1 DIRECTIONAL DRILL BORING MACHINE **SALE PENDING**
2002 Ditch Witch JT7020 Mach 1 Directional Drill-RUBBER TRACKS- FMC WATERPUMP- Approximately 720 feet DRILL STEM- ENCLOSED CONSOLE- 4.394 HOURS- CRANE- Ref. No: BORE1217 Year: 2002 Make: Ditch Witch Model: Ditch Witch JT7020 Mach 1 Engine: Deutz BF6M1013ECP Horse Power: 261 Hours: 4394 Operating Weight: 42600 Description: 2002 Ditch Witch JT7020 Mach 1 Directional Drill. Enclosed Cab. Rubber Tracks, Crane, FMC Waterpump, 57 Sticks Of Drill Stem(Approx. 855' This machine has the original paint and is in exceptional condition for the year and hours. We will go thoroughly through this machine testing everything including hydraulic pressures. We will make all repairs here at our facility. This machine will be sold with no issues- completely checked out and ready to work. Feel free to call us for more on the history of this rig. Here at MTI ... moreEquipment we buy and sell directional drills and have done so for over 25 years. We are experienced in all aspects of directional drill repairs and have"seen it all" This rig will be sold ready to work with our highly trained staff and mechanics inspecting and repairing this rig. We drill with every rig that leaves our yard using every function and testing all pressures. We try our hardest to ensure you are getting a machine that will be"turn-key" You are welcome to our facility to drill with this or any other rig you might be interested in. We offer full onsite training for you and your staff free of charge- call for more details. PLEASE NOTE: SUBSITE ELECTRONICS ARE AVAILABLE AT ADDITIONAL COST AND NOT INCLUDED IN THE PRICE* Why buy your directional drill from MTI Equipment? Full selection of support equipment- New or used locators/ trailers/ mud systems/ trucks/ new or used tooling- Financing available- Spanish and English speaking staff- Free truck loading/ container loading- After sale support-
|
|
|
ROAD BORING MACHINE TRAILER MOUNTED
Road Boring Machine Trailer Mounted 24' Carrier King.20.000 LB Trailer With Cummins 3.9 Liter Diesel.Fonk Transmission Showing 531 Hours.Has Custom Made Hydraulic Double Ram Rotary Bore Machine,53 Pieces Of 60" 3 1/4 Heavy Wall Stem For Sale.Call For More Details.Call 210-648-2122 Custom Built Feel free to come by or send someone to inspect trailer. For help with PayPal please contact us. We accept Visa. MC& Discover. Buyer pays actual freight cost. We can help ship anywhere! Please call with any questions 210-648-2122 or toll free 1-877-648-2122 Subject to prior sale.All reasonable offer are considered. If you are serious about our equipment, some kind of in house financing could be possible. We constantly need trades, always buying Dump Trucks, Bucket Trucks, Trailers, Excavators, Backhoes, Skid Steers, Loaders, Graders or ... moreany yellow iron. Payment must be cleared prior to pick up or delivery arrangement. We are a working company open for business 8-5 Monday through friday Central Standard time. Please feel free to contact us for any specifics or details through ebay or call us toll free at 1-877-648-2122. Ask for Teresa
|
|
|
1995 Blum "Mini-Press" Tabletop Boring (Hinge) Machine (Woodworking Machinery)
BUYER MUST EMAIL PRIOR TO PURCHASE TO RECEIVE ACCURATE TOTAL WITH FREIGHT/CRATE CHARGES ALL CRATING& FREIGHT CHARGES ARE BILLED SEPARATELY FROM THE PURCHASE PRICE OF THE ITEM BLUM MINI PRESS Features: The Blum Minipress is a robust tool that is flexible enough to be used in the workshop as well as on-site jobs! This manually operated machine runs on 220V. It features an adjustable fencing system and stroke control. Complete with pneumatic hold-down clamps and dust evacuation jet. This press is a very simple and efficient machine designed to bore all hinge and mounting plate systems. METABOX and TANDEMBOX front fixing brackets, METABOX C-15 drawer components and 3-Hole line boring of cabinet sides. Technical Specifications: 220V. 60Hz, 3Ph, 1.1HP(0.75Kw) Spindle Speed: 2.450RPM Shipping Dimensions: 34" X 32" X 33" Est. Weight: ... more110lbs. Specifications listed are to the best of our knowledge* Verification available upon request* Replacement Cost: $3.400 Condition: 3) Used/ Good Working Condition Our ratings are as follows: 1) New Surplus: Equipment or parts are new. 2)Demo/Floor Model: Demonstration use only. Like new. 3) Used/Tested: A complete test/cycle was performed and no issues were found. 4) Used/Pulled/Good: Pulled from a working unit. And because of proprietary design, the complete working unit was de-manufactured, and the parts sold. 5) Used/Untested: Items that we did not test or cannot test. This item was received by us as an individual part or integrated equipment that could not or was not tested. PLEASE VISIT OUR EBAY STORE FOR MORE GREAT PRODUCTS! Payment: Please do not submit payment until you receive a final invoice with all applicable charges. Should you submit payment without shipping. Handling charges, and applicable tax you will receive a separate invoice. Items will not be shipped until invoice is paid in full. Paypal is the preferred method of payment. Please email for alternate methods of payment should you wish to pick-up your item in person. Payment is expected within 5 b
|
|
|
Grizzly Industrial Hinge Boring Machine
This machine ships via a common carrier. Buyer is responsible for making arrangements to accept delivery. See below for details. Grizzly Industrial Hinge Boring Machine If you make cabinet doors with Euro-style hinges. You’ll appreciate this Bench Top Hinge Boring Machine. Designed for production, this machine features adjustable hold-down clamps, adjustable flip stops, adjustable lateral travel and adjustable depth stop. Setup is a breeze and operation couldn’t be any simpler. You’ll truly be amazed at the precision and time savings over traditional methods! Choose the optional boring head that matches your brand of hinges. Specifications: Motor: 1 HP. 110V/220V, single-phase, 3450 RPM, 10A/5A, prewired 110V Table size: 28" wide x 13-3/4" deep Maximum throat: 4" Fence length: 12-3/16" x 2) Plus 28" left extension ... moreStroke: 4" Stroke operation: Manual Dust port: 4" Overall dimensions with handle: 29" wide x 36-5/8" high x 25" deep Footprint: 15-1/2" wide x 22-1/2" deep Approximate shipping weight: 198 lbs. Features: Hinge alignment swing arm for matching hinge position Depth stop adjustment Lateral adjustment Two fence flip stops Two toggle hold-down clamps Fence extension SUJ-2 high carbon anti-friction steel slide shafts with linear bearings See-through guard Rear-mounted dust port Interchangeable boring heads sold separately Boring machine is non refundable and does NOT come with a warranty. Ship anywhere within the lower 48 states! Contact us for shipping quote Please send us a message through eBay if you are shipping to Alaska. Hawaii or Puerto Rico. Thank you. Item location: Bellingham. WA How quickly do you ship orders? IN A FLASH! Orders received before 12 noon(Eastern time) Monday through Friday, are normally shipped the same day. Once shipped, orders take approximately three to five business days to arrive. How are items shipped? Items under 70 lbs. are shipped via UPS Ground or UPS Mail Innovations. Items over 70 lbs. are shipped via truck freig
|
|
|
USED PORTA MOLE HORIZONTAL PRECISION EARTH BORING MACHINE PORTABLE UNIT TOOL
FOR SALE IS A PORTA MOLE SYSTEM FOR HORIZONTAL EARTH BORING. THIS UNIT WAS PURCHASED AT AN ESTATE SALE. ALL IS IN GOOD WORKING ORDER. THE FOLLOWING IS INCLUDED IN THIS SALE; 8) BORING BITS. 9)10' BORING BARS, 1) WATER PUMP WITH A HONDA GX 160 MOTOR, 1) 320 GALLON WATER TANK, 1) WATER HOSE WITH REEL, 2) PIPE WRENCHES, 1) 9 H.P. HONDA GX 270 POWERED BORING MACHINE, 2) TANK STRAPS, 1) TOOL BOX AND OTHER MISC. HARDWARE. DUE TO THE SIZE OF THESE ITEMS. THIS SALE IS FOR PICK UP ONLY, AT MY RESIDENCE IN INWOOD,WV. 25428 WHICH IS LOCATED ALONG INTERSTATE 81 BETWEEN MARTINSBURG WV. AND 15 MILES NORTH OF WINCHESTER,VA. THIS IS APPROXIMATELY 1 HOUR FROM WASHINGTON D.C. OR BALTIMORE.MD.
|
|
|
DITCH WITCH JT4020 DIRECTIONAL DRILL, BORING, HDD DRILL RIG
Stock# 520 Available is a 1999 Ditch Witch JT4020 Directional Drill. 3233 Hours Includes 1320 feet drill pipe rated at 85% Includes housing/bit/starter rod/slide collar. hydraulic stakedowns Four Extra Short Pipe baskets included Powerplant- John Deere 185HP Diesel Runs excellent. Excellent running condition. Serviced and ready to drill. Contact us for pricing and availablity for electonics. Mixer, tooling, trailer, trucks. Inpection/Test drilling of equipment is welcome and available by appointment. Please contact. Equipment sold"As Is" Financing Assistance Available. Please contact. Buyer responsible for all shipping costs. We can load this equipment and provide shipping quotes. MI residents subject to 6% sales tax. Questions please contact. Norton Equipment Sales 810-660-7238
|
|
|
1999 Vermeer D24x26 Directional Drill, Boring
Stock# 313 Available is a 1999 Vermeer D24X26 Directional Drill. Drill shows 2322 hours on meter. Includes 500 feet drill pipe rated at 65% hydraulic stakedowns. Powerplant- Cummins Diesel Runs excellent. Runs strong. Contact us for pricing and availablity for mixer. Tooling, trailer, trucks. Inpection of equipment is welcome and available by appointment. Please contact. Equipment sold"As Is" Financing Assistance Available. Please contact. We reserve the right to end this listing early as it is for sale elsewhere. Buyer responsible for all shipping costs. We can load this equipment and provide shipping quotes. MI residents subject to 6% sales tax. Questions please contact. Norton Equipment Sales 810-660-7238
|
|
|
26 pcs micro 100 boring bar lot
Up for sale is a 26 pcs lot of micro 100 boring bars. All of these are used but are in like new shape. They will all have there sharp pound and are able to scratch your fingernail. So they are sharp. In this lot you will get some custom tools, some min.290 bore bars, groove tools, threading bars, and others. I have sold other lots like this to multiple people and they were all very satisfied with the product and price. If you had to purchase all of these separate you would be paying over $800. You can have them for substantially lower. Posted with
|
|
|
BOX LOT CUTTING TOOLS End Mills, Carbide Inserts, Boring Bars, More, NO RESERVE!
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! BOX LOT CUTTING TOOLS End Mills. Carbide Inserts, Boring Bars, More, NO RESERVE! This is a NO RESERVE auction for a box lot of assorted machinist goodies. You get the following: assorted stones. Carbide inserts, end mills, center drills, needle files, boring bars, and a few things I don’t recognize. Except for the inserts, there is no carbide. The pictures should tell you what you need to know about condition. This stuff is expensive to buy one at a time. So here is your chance to steal a nice box lot! Condition: Used See description for disclosures. andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: Fixed Shipping Charges. Shipping Carrier Domestic Usps Priority Mail Small Flat Rate Box $5.80 I will ship to: United States Customer ... moreService Policy: Will combine with other items when possible. Items generally shipped immediately after payment. Occasionally if I'm out of town or if there is a storm, there may be a delay. toolshedofma Your satisfaction with anything you buy from me is most important. And accordingly, I accept returns for any reason, if you contact me within 30 days of receipt of item. I will refund your entire purchase price plus postage both ways if for any reason your purchase proves to be unsatisfactory. THERE IS NEVER A NEED TO LEAVE NEGATIVE OR NEUTRAL FEEDBACK! Just let me know the item is on the way. I encourage you to add insurance. Particularly on the more expensive items. I do track every shipment, so can tell when it is delivered. If it's lost, it's on your dime. Unless you have insurance. Also. Please note that I do comply with all rules and regulations, so will be unable to declare a low value for overseas shipments. Sorry! Please note: my online name. ToolShedOfMassachusetts is not owned by, nor affiliated with, any business with the same or similar name. CHECK OUT MY FEEDBACK RATING. AND BID WITH CONFIDENCE! GOOD LUCK, AND HAPPY BIDDING! A pretty image. templa
|
|
|
Huge lot specialty boring bits vintage wood drill hole cut saw chisel auto punch
BIG LOT OF BORING BITS PUNCH"S ECT Here is nice lot of bits and handmade tools punch automatic punch ect. Someone is going to get a deal! These all look in good shape and are usable. vintage Brush Hog brochure book that has survived through the years between books. This looks in good shape and the brochure has no rips or missing pages. Used condition a little grease on the back; This must be payed for within 48 from the end of the auction via Paypal. This will be shipped out quickly via USPS after receiving cleared payment. If you have any ques tions feel free to contact us through eBay messages and we will reply within a few hours. Thanks for looking! No international shipping. No zero feedback bidders. This must be payed for within 48 hours from the end of the auction We only accept Paypal for this auction This is asis as all our used ... moreitems are. If you have any questions contact us through eBay messages. Please look at our other items. Check out my! Thanks for looking! Internetauctions1.
|
|
|
WOHLHAUPTER Boring Head 2/2804 Mo. 2xL Mill Press Machinist Tool Germany
Here is a nice Wohlhaupter boring head. It appears to be in good working condition. I don't know much about machinist tools. So please ask any and all questions you may have. Please see my other auctions for more machinist tools. Thanks for looking and please add $8.75 for shipping.
|
|
|
4" Air powered boring tool. Vermeer hole hog with hose
This is a used 4" air powered missle. It requires a large air compressor to operate it. It will self propel into the earth. For boring under driveways, sidewalks, or roads. I do have a video of it operating. No shipping will be used on this sale. It will be for local pick up only. The ad will read free shipping, but it will not ship. Please ask any questions prior to bidding please. Buy with confidence, we only have 100% positive feedback. Compressor in video only set to 80 psi. Just used on small bore last weekend in clay. All good!
|
|
|
C. C. CRALEY Adjustable boring head set CAT 40 adapter and boring bars
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 C. C. CRALEY Adjustable boring head set CAT 40 arbor I believe this has a CAT 40 arbor. it measures 25mm on the small end and 43.5 on the large end comes with boring bars and metal storage box the largest bar is 1.5"D and 9. 5" long Looks new. Like it was never used weighs 2 5 pounds Please refer to the shipping calculator for shipping to your zip code. Disclaimer: Payment must be received within 7 days after the close of the auction. If you have any questions. Please feel free to contact me. Thanks for looking and happy bidding!
|
|
|
METAL SHAPER or PLANER or BORING MILL CUTTING TOOLS hss bits OK TOOL CO size G
lot of 23 HSS cutting bits- some are new OK Tool Co. USA size G various shapes as pictured please check my other auctions and happy bidding! FREE FAST SHIPPING ANYWHERE IN THE USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Aciera Schaublin W20 Boring head
Aciera.Schaublin W20 boring head,CA tax for CA res Posted with
|
|
|
Machinist Tool Boost Boring Tool Holder for Lathe To Size
Hi. My name is Joe and I'm a 76-year old male Pack Rat. Initially. My sons helped me set up and sell A LOT of items on this site, which explains my high feedback number. I've now been listing all of this STUFF by myself for over 4 years now. I'm not"totally" knowledgeable about a lot of my STUFF, but have been doing the very best I can with"a little help from my friends, learning all the way along with coaching and helpful tips. I do my best to describe the items to the best of my ability and take good photos from several angles. Would like to point out that the last 4 years is MY feedback, I have worked hard to earn your trust and confidence. I will be happy to answer any questions you may have. A few years back I was the recipient of my Uncle Harold's STUFF. He was THE BIGGEST"PACK RAT" EVER! I open ... moreboxes daily from his barn, garage, basement, etc. never knowing WHAT I'll find. Could be Vintage Fishing Lures, Glassware, Antique Bears& Dolls, Old Tools, Vintage Banks, Cool Vintage Model Airplanes/Cars/Military Equipment(most ALL being New Old Stock with tags still attached!and the list goes on and on. Will try and list as fast as I can get to them. Also, TONS of Comic Books, all Ages, Subjects and Conditions, which is where I first started. PLEASE"Save Me as a Fave" and check in often. All of my listings start at 99¢ with NO RESERVE and hopefully will end up selling where they should. Hoping that you, the Buyer, will rely on my photos and best description to judge/pick a grade that best fits my merchandise. I guarantee it will be Fun& Interesting. Thanks for shopping with me& GOOD LUCK! JOE PLEASE ALSO NOTICE THAT A LOT OF MY LISTINGS ARE STARTING AT MORE THEN THE.99 CENTS THAT I ALWAYS USED TO DO! My Uncle at one time had purchased at auction two large Kennedy Toolboxes on wheels. Literally filled with machinist tools that I know nothing about. I'm sure from looking some of it up online that I have a great amount of valuable and useful
|
|
|
Boring Head Unbranded *Nice*
Boring Head Unbranded*Nice* Item is in good condition. All adjustments move smoothly This listing is for(1) Boring Head USED. ShelfG35 0812JB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt for is filed with our company. No exceptions. With International shipments. We ship both United States postal service, as well as UPS international. We will ship USPS, if the insured value does not exceed their maximum insurable value. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at it's ACTUAL purchase price. It is against federal ... morelaws to declare anything BUT actual sale value. If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact number for your customs broker. We MUST include this information with the original bill of lading for the freight company. As always. If you ever have a question or concern, please don't hesitate to call us toll free at 866-293-8981. We are happy to help in any way we can! Powered by
|
|
|
Borite Small Boring Bar Set
Small Borite boring bar set with stand. The boring bars have a 1/4" shank& the holder is 3/4" diameter. There are 7 bars total. 3 of which are still covered with cosmoline. These were barely used& are still in great condition.
|
|
|
KENNAMETAL CARBIDE SHANK 3/8" BORING BAR L06M-SCFPR2 3330999 CNC LATHE MACHINIST
Greetings and thanks for checking out my auction! Up for bid here is a used Kennametal carbide. Coolant through, indexable boring bar. This bar has been trimmed to 4" OAL. It has seen plenty of use, but is still in great working order. It comes as shown with insert, screw and torx wrench. I tried to get every possible angle to show the wear on the reverse side. Bidding will begin at just 99 cents. I will ship this for FREE in a padded envelope. Please check out my other items for more cool machining tools and gages. Brand new this bar costs over $200. This used bar still has plenty of life left- here is a chance to add a great tool for a low price. I pasted all the info on this bar from the MSC website below. Thanks for looking! Happy bidding! MSC Part# 93755726, Big Book Page# Brand: Kennametal, Mfr Part# 3330999, Order Qty: Order Qty ... moreof 1 =(1) Piece, In Stock: 12, Price: $216.32 ea. Quantity: Quantity: TOTAL: $216.32. Indexable Boring Bars | Minimum Bore Diameter(Decimal Inch) 0.4800 | Hand of Holder: Right Hand | Toolholder Material: Heavy Metal | Through Coolant(Yes/No) Yes | Maximum Bore Depth(Decimal Inch) 0.9100 | Overall Length(Decimal Inch) 6.0590. Minimum Bore Diameter(Decimal Inch) 0.4800, Hand of Holder, Right Hand, Toolholder Material, Heavy Metal, Through Coolant(Yes/No) Yes, Maximum Bore Depth(Decimal Inch) 0.9100, Overall Length(Decimal Inch) 6.0590, Shank Diameter(Inch) 3/8, Shank Diameter(Decimal Inch) 0.3750, Insert Compatibility, CPMT, Toolholder Style, L-SCFP, Series, Screw-On, Multi-Use Tool(Yes/No) No, Insert Holding Method, Screw, Insert Inscribed Circle(Inch) 1/4, Rake, Neutral, Center to Cutting Edge(Decimal Inch) 0.2500, Insert Thickness(Inch) 3/32, Rake Angle( 0, Coolant Hole Diameter(Decimal Inch) 0.1250, Complete Insert Compatibility, CPMT 21.51.
|
|
|
ATLAS CRAFTSMAN 6" METAL LATHE BORING BARS
BORING BARS FIT INTO THE TOOL POST OF THE ATLAS CRAFTSMAN 6" METAL LATHE. GOOD CONDITION
|
|
|
CRITERION Boring Bar # TBG-1000, 6" long x 3/4" Diameter, Flats all Around
CRITERION Boring Bar# TBG-1000. It measures 6" long x 3/4" Diameter. It has flats all around it. The tip of the bar and clamp( CM-72) are excellent. A bit was in it and included. The very front looks like it has a pin or set screw used as a stop. We are not sure but there are 2 holes and 1 screw or pin. Shipping and handling costs for this listing will be $4.95 within the U.S.A. We will ship internationally if a cost or calculator shows below. Or please inquire for international shipping costs. Visit our eBay store for more great values. We will ship promptly. We want your 5 star feedback and will do all we can to make sure you are satisfied with your purchase. Please contact us first if you have any issues with your order upon receipt. Michigan sales will be invoiced with sales tax. Thank you! 0113033935)
|
|
|
Hardinge Lathe Boring Tool Holder C19 Used Very Good Condition.
Hardinge boring Tool Holder C19 Good condition.
|
|
|
LOT OF 4 LATHE BORING / THREADING BARS ATLAS CRAFTSMAN LOGAN SOUTH BEND
LOTS OF AUCTIONS ONLINE NOW! Brand Atlas Packaging None Condition Excellent Quantity 4 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 1) 3/8" 2) 1/4" 1) 3/16" I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
VALENITE HBN-170 INDEXABLE LATHE BORING BAR TOOL HOLDER & (2) HEADS
This is a used VALENITE HBN-170 lathe Boring bar with two indexable'heads' included. It's in good condition and at least one of the heads looks brand new. Shank dimensions. Part numbers etc. are shown in the pics. Great quality tool! Don't miss it as it includes super fast FREE Priority mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my ... morechoice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
|
|
|
Kempsmith Defiance 5-5A Boring Machine Operator Manual
Kempsmith Defiance 5-5A Boring Machine Operator Manual Up for sale is a vintage factory issued Operating Manual for the Defiance Horizontal Boring. Milling, Drilling and Tapping Machine Model 5-5A. Fair condition, dirty and the schematic has a tear. Perfectly usable. I pack for safe shipment. Payment is expected within 7 days from end of auction. ~I will combine shipping when possible and usually state combined shipping and handling costs in the description. ~I am very good about shipping within 3 business days after payment is received. ~I will not be responsible for loss or damage during shipping so please buy insurance if you have concerns. ~Once item is received please leave positive feedback and I will do the same.
|
|
|
5 Pcs. Lot Solid Carbide-Groove Boring Bar-Micr 100
ALMOST NEW- 5 Micro 100 Carbide Boring Bars- used only 1 time to take out.020 of plastic. You wont be dissapointed. Check out my other auctions. I have plenty more of the same size. All 5 still have there sharp points. So i have to list them as used but are almos new. If you had to buy these new you would be paying almost $40 a piece. You can own all five for that price. I have sold over a thousand bars and have no complaints to date. RRL-087-20 is the number on the boring bar Will combine shipping if win other auctions Free shipping to US. Shipping to Canada is $6.00 Posted with Posted with
|
|
|
NICE ORIGINAL WILLIAMS AGRIPPA 1/2" BORING SLEEVE BAR ROD & BIT TOOL 4 LATHE
Nice- Original Williams boring sleeve with 3/16" bits installed. Sleeve is stamped 1/2" AGRIPPA PLAIN BAR JH WILLIAMS& CO. MADE IN U.S.A. 1/2" diameter sleeve is 8" long. nice Williams boring bar. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LOT OF 8 ARMSTRONG LATHE BORING THREADING BARS ATLAS CRAFTSMAN LOGAN SOUTH BEND
LOTS OF AUCTIONS ONLINE NOW! Brand Armstrong Packaging In Original Box Condition Very Good Quantity 8 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 4) 3/8" 2) 5/16" 2) 1/4" All stamped Armstrong. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
|
|
|
4 Ferrari a matic Hinge Boring Machines
You getting all 4 Ferrari drilling boring machines and a nice steel table all wired and plumbed for air supply. The machines have the 3 head design but are only using 1 drill per unit for what they were building here. The machines are set up to work together. The number 2 machine controls the clamping cylinders on unit one and two. The third machine controls the clamping cylinders on machines three and four. Then the raise and lower control on machine two controls all four machines so they drill simultaneously. I think they were putting two doors at a time in the machine then drilling all the holes at once. Its 220 volt single phase. They used 3 phase twist lock plugs. One of the machines is a 2007 the other three are 2006 models. The table is 3' x 10' I'm 5 miles west of Milwaukee if you would like to inspect or pickup. Everything ... moreworks great. Pulled working from a closed down company. As is Check my feedback I only sell nice machines. No junk. Jeff 262 227 7774 o.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpl%7E3go7%3Eo-13e0f58bbba-0xfe-
|
|
|
USED KENNAMETAL carbide insert BORING BAR S32-DDUNL4 (2.00"-Shank) DNMG-432
LISTING IS FOR A USED KENNAMETAL BORING BAR BRAND- KENNAMETAL STYLE- S32-D DUNL4 PART# BL- 3616 SHANK- 2.00" OAL- 1 3.00" USES INSERTS- D NMG-432(NOT INCLUDED) CONDITION- GOOD USE D SOME SCO RING ON BACK OF SHANK Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS ... moreOF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE
|
|
|
6 USED MINI RETAINING RING BORING BARS. 3/8" SH. GROOVING. USA MADE {Y495}
6 USED MINI RETAINING RING BORING BARS. 3/8" SHANK. SOME ARE MICRO 100 RR BARS USED BUT NOT ABUSED. RETAINING RING BORING BARS. THESE BARS ARE FOR GROOVING. SHANKS ARE ALL THE SAME. THESE RETAINING RINGS WERE RR-087-20 BEFORE THEY WERE USED. THEY RETAIL FOR 4-5 TIMES THIS PRICE WHAT IS SHOWN IN MY PICTURE IS THE ITEM YOU ARE BUYING. TAKE A CLOSE LOOK AT MY PICTURE. ITS GIVE YOU A VERY GOOD LOOK THAT THEY ARE NOT ABUSED. ANY QUESTIONS PLEASE ASK BEFORE BUYING.
|
|
|
8 USED MICRO 100 BORING BARS. BOR DIA- BB-230'S AND BB-180'S {Y473}
8 USED BUT NOT ABUSED MICRO 100 BORING BARS. BRAND NAMES ON SOME OF THEM IS MICRO 100 MINIMUM BORING DIAMETERS VARY- BB-230'S AND BB-180'S BORING BARS. MAXIMUM BORE DEPTH'S VAR Y. TAKE A GOOD LOOK AT THE PICTURE. YOU CAN TELL THAT THEY ARE NOT ABUSED. SHANK- 5/16" MADE IN USA. WHAT IS SHOWN IN MY PICTURE IS THE ITEM YOU ARE BUYING. ANY QUESTIONS PLEASE ASK BEFORE BIDDING.
|
|
|
ARMSTRONG BROS. 1-B LATHE TOOL POST/BORING BAR HOLDER
Inventory Number: 04130630046 Manufacturer: Description: ARMSTRONG BROS. 1-B LATHE TOOL POST/BORING BAR HOLDER Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, AS SHOWN, 3-1/8" X 1-15/16" X 3/8" T-BOLT DIMENSIONS BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now ... morepricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be functionally the sa
|
|
|
JIG BORE 220 volt 3 ph motor precision boring mill MOORE USA BRIDGEPORT CT
Good Used Jig Bore Moore Tools Bridgeport. CT USA Master 3 Phase 220 Volt 1/2 HP 2 Speed Motor WILL LOAD FOR FREE ON A FLATBED ONLY! for a shipping quote call Jack Becker at 1-800-323-5441 ext 1951 or JBECKER at freightquote. com. tell him approx 2500 lbs on a 48" x 48" x 88" high from R and T Tooling or pickup in Milroy Indiana zipcode 46156 and i will load for free Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
mostly carbide tipped boring bars tool tools machinist toolmaker
you get what you see except for the $1.50-50% as to used and unused.there are 17 plus 11 thin straight shaft in that 1/2 of a cigar tube. Connecticut buyers to pay 6.35% sales tax. I will combine.Handling$1 per Ebay item on combined orders only.on combined orders I charge actual shipping costs plous $1 handling per item. Items are described to the best of our knowledge. However. We at The machinist Box LLC make no guarantees as to accuracy or calibration of any item sold. As per good business practice, all items should be calibrated/checked by purchaser prior to being used. As always, The Machinist Box LLC has a"no questions asked" return policy if there are any issues with an item purchased from us.
|
|
|
14” HDD Ditch Witch THREE WING Directional Boring Back-Reamer for clay to rock
for other duct pullers. Reamers, duct rodders, vacuum systems, pothole rigs, swivels and other HDD and aerial construction equipment, or contact me with questions or for additional info@ 714 694-5930. If you don't see what you're looking for, please contact me as I only have a small percentage of my tooling currently listed on eBay. DITCH WITCH THREE WING 14" reamer with 2.75" shaft. Item#13) 14" x 2.75" Shaft Ditch Witch Three Wing Reamer w/pulling eye. Take notice of the hard facing on the leading edge. Look closely…this unit is used but has thousands of feet of life remaining! You are bidding on the item shown in the pictures. This reamer runs EXTREMELY well in ALL SOIL conditions. Except for solid rock. Many other reamers. Downhole tools, hole openers, fluted reamers, razorback reamers, crusher reamers, Kodiak ... morereamers, three wing reamers, shredder reamers, Ogre reamers, Terminator reamers, Sabertooth reamers, Turbo reamers, Hedgehog reamers, Juggernaut reamers, beavertail reamers, swivels, duct pullers, subs, crossovers, cross overs, adapters, conical carbide cutter bits, mix master reamers, T Rex, Fly Cutter, barrel reamer, Rail Head, Helical, Sniper, cone, roller, shark teeth, Subsite beacon, duct rodders, vacuums, pothole plates, pot hole vacuum, mud vacuum, and other utility contractor tools available. If I have a sub/cross-over to fit your rig I will include it for an additional $75 and will ship together if paid before I ship the reamer. Payment can be made through Paypal. Cash, bank wire transfer. Worldwide shipping. T his reamer weighs approximately 110 pounds and is 33" long. So please c ontact me with an business shipping address and I can likely provide a more aggressive quote than what is listed. I list handling time as 3 days. But almost always ship within 24 hours and do my best to ship same day! Thanks for looking! The fine print below. SELLER PAYMENT and SHIPPING POLICIES: Paypal payment is due within 2 days of the auction close. Import duties. Taxes and charge
|
|
|
LARGE V BLOCK MACHINIST SETUP JIG FIXTURE BORING MILLING GRINDING A
DESCRIPTION: USED. V BLOCK. IT MEAS URE 6 X 6 X 6 APPROX NO CLAMPS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST TOOLS;VI
|
|
|
Custom Built Boring Bar Holder for .500" & .750" Shanks
C8805. Custom Built Boring Bar Holder for.500" 750" Shanks- Fits into Aloris Tool Holders- Case hardened- 3 and 1/2 inches long. Please review all the pictures. They are part of the description. We combine shipping whenever possible. Not responsible for customs charges.
|
|
|
MISC. LOT OF TAPS,CT DRILLS,CT'SINK,BORING BAR, & A LUFKIN TELESCOPING GAGE
BIDDING ON A MISC. LOT OF TOOLS INCLUDING(11) USED TAPS.1) CT'DRILL,1) CT'SINK, 1) 3/4 DIA. BORING BAR& A LUFKIN 1 1/4" TELESCOPING GAGE CLEANING OUT MY TOOL BOX- ALL ARE USABLE TOOLS THANKS FOR LOOKING QUESTIONS WELCOME
|
|
|
NICE ANGLE PLATE BLOCK MACHINIST MILLING BORING GRINDING SETUP JIG FIXTURE
DESCRIPTION: USED. ANGLE PLATE. IT MEASURES 3 3/4 X 4 7/8 X 4 1/8HIGH APPROX. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR SHIPPING AND INSURED. HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY
|
|
|
MACHINIST CROSS HOLE BORING DRILL PRESS JIG FIXTURE
DESCRIPTION: USED. BORING JIG. THE LEVER MOVES THE TOP PLATE UP AND DOWN. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND SELL MACHINIST TO
|
|
|
PFEIFER Horizontal Boring Mill
3" PFEIFER Horizontal Boring Mill in very good and working condition. Built in Rotary Table and Tailstock. The machine is recently retrofitted with NEW KA-13 MITUTOYO 3-Axis DRO and TELEMECANIQUE Electrics. THE MACHINE IS UNDER POWER READY FOR INSPECTION. PFEIFER HORISONTAL BORING MILL SPECIFICATION Spindle Size 3” Table Size 28”x 36” X-Axis Travel 32” Y-Axis Travel 28” Z-Axis Travel 32” Spindle Travel 23.6” Main Motor 10HP. Spindle Taper#40. Electrics TELEMECANIQUE. Equipped with: 3-Axis Mitutoyo DRO(KA-13) Pendant Control. Tailstock. Coolant Pump. 5 Toolholders. CONDITIONS OF SALE: The machine as is pictured. Shown or inspected. The price is FOB shop floor price. For additional information or any questions please contact Detchko Kostadinov at sales@parseceng.com or call 905-669-6470.
|
|
|
Wohlhaupter UPA3 / 1666 Boring Head
Light use in Aluminum All movements are smooth and accurate In original box No crashes or heavy cuts NO RESERVE I will package carefully for safe shipping
|
|
|
Boring Indicator How-To Build PLANS 6" 10" Atlas Lathe
Grandpa's Secrets Discover a Wealth of How-to Projects& Plans from a Bygone Era. Explore our Scientific& Mechanical History in Vintage Hobby. Craft, Technical Magazines. grandpas_secrets Store for lots more great Items. Boring Indicator How-To Build PLANS 6" 10" Atlas Lathe Plans for a Boring Indicator. The indicator shows you where the tool point is at all times. Perfect for boring and threading blind holes without bottoming out and ruining the piece or your tool. Designed for Atlas 6" and 10" lathes. It can easily be modified to fit others. Made from steel and other commonly available materials. This is an original 3 page magazine article from 1969. We do not photocopy these. Article Includes Measured Drawings and Diagrams, Complete Instructions, Pages are not all shown in Photos SHIPPING TERMS: Buyer to ... moreprepay and add- Multiple Wins may be grouped to save on shipping. $2.00 for USPS first class mail service or, $5.25 for priority mail service. Add $1.75 to total if you would like insurance with delivery confirmation. $3.00 for shipping to Canada. $5.00 other International shipping Payment: by Paypal. Visa and Mastercard accepted thru PayPal. Items shipped upon receipt of Paypal payment. CHECK OUT OUR OTHER AUCTIONS. Listing created with from Black Magik Software.
|
|
|
EVEREDE NO. 2 LATHE BORING BAR HOLDER, 3/4" BAR HOLE
Inventory Number: 04130630043 Manufacturer: Description: EVEREDE NO. 2 LATHE BORING BAR HOLDER. 3/4" BAR HOLE Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY ... morecombine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be functionally the same as shown, but may not be identical in appearance. Ou
|
|
|
8 PIECE MIXED LATHE LANTERN TOOL POST & BORING BAR HOLDER LOT
Inventory Number: 04130630045 Manufacturer: Description: 8 PIECE MIXED LATHE LANTERN TOOL POST& BORING BAR HOLDER LOT Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 8 PIECE MIXED LOT, AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on ... moreauction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be functionally the same as shown, but m
|
|
|
2 Erickson Tool Dial Set Boring Bars 1" and 1 1/4" Shank
2 Erickson Tool Dial Set Boring Bars 1" and 1 1/4" Shank part numbers 2-80-148-025 and 2-80-036-020 used condition All sales final. Use shipping calculator for shipping Cost Payment must be received within 3 days after the close of the auction. All non-paying bidders will be reported to ebay. So if you do not intend to pay please do not bid! Take a look at my other auctions to see if there is anything else that you might be interested in. Happy bidding!
|
|
|
PILE OF METAL LATHE BORING BAR TOOL HOLDERS MACHINIST TOOL
DESCRIPTION: USED, BORING TOOL HOLDERS. SOME OF THE SHANK SIZES ARE: 1 5/32 X 5/8; 1 X 5/8; 7/8 X 1/2; 13/16 X 1/2. THE AUCTION IS FOR ALL. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO ... moreNOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA,
|
|
|
24" ROTARY TABLE W/POWER TAKE-OFF LARGE MILL HORIZONTAL BORING MILL
24" ROTARY TABLE W/POWER TAKE-OFF LARGE MILL HORIZONTAL BOREING MILL, 24" ROTARY TABLE OLD HEAVY DUTY UNIT WEIGHT APPROX 500# WORKS FINE CAN BE POWERED OR USED MANUALLY N/C TO STRAP TO SKID FOR FREIGHT SHIPMENT. QUESTIONS CALL MATT 845-691-4140 Payment I accept the following forms of payment: PayPal Shipping& Handling Freight- Check item description or contact seller for details. Click to View Image Album Click to View Image Album Click to View Image Album More than just a pretty picture. Try Vendio Image Hosting. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager.
|
|
|
MOORE SPECIAL TOOL MICRO-SINE TABLE FOR MOORE ROTARY TABLES JIG BORING GRINDING
MOORE SPE CIAL TOOL MICRO-SINE TABLE 10" WIDE. 12-1/2" LONG FOR USE WITH M OORE PRECIS ION ROTAR Y TABLES NICE CONDITION SHIPS UPS CRATED. NO CHAR GE TO CRATE BUT BUYER PA YS SHIPPING
|
|
|
NMTB 40 TAPER BORING HEAD bar mill milling tool holder MICROMETER CARTRIDGE
good used nmtb 40 taper boring head- micrometer adjusting no mfg marked 2 1/2" dia x 8 1/4" long FREE FAST SHIPPING ANYWHERE IN THE USA please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items. 2fiuqm.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bifc%3E2fiuqm-13e14cb28c5-0xf6-
|
|
|
Wohlhaupter UPA 3 Milling Boring Head For Bridgeport R8 Machines
Very nice condition Wohlhaupter R8 shank automatic boring and facing head set. I think the pics pretty well speak for themselves. Free shipping within the USA. Inspection in my Aberdeen. NJ shop is welcome call 917-974-7381. NJ and Ny residents must add sales tax or provide a valid exemption. PLEASE CHECK MY OTHER ITEMS.
|
|
|
LOT OF 1 CNC BORING MILL TOOL HOLDER WHISTLE NOTCH HSK MACHINING CUTTER TOOLING
THIS IS A WHISTLE NOTCH TOOL HOLDER.NUMBERS ON HOLDER ARE TAPMATIC HPT50,THIS IS THE MEDIUM MOUNT WHERE IT ATTACHES TO MILL,APPROX.2-1/4" FOR 1/2" MAXIMUM TOOL,PLEASE SEE MY OTHER AUCTIONS.WE DO COMBINE ORDERS TO SAVE ON SHIPPING.WE CAN USE FLAT RATE BOXES FOR BIG SAVINGS.3
|
|
|
LOT OF 1 CNC BORING MILL TOOL HOLDER WHISTLE NOTCH HSK CARBIDE CUTTER TOOLING
THIS IS A WHISTLE NOTCH TOOL CARBIDE CUTTER.NUMBERS ON HOLDER ARE VALENITE TL#93-200-1146 M1018031,THIS IS THE MEDIUM MOUNT WHERE IT ATTACHES TO MILL,PLEASE SEE MY OTHER AUCTIONS.WE DO COMBINE ORDERS TO SAVE ON SHIPPING.WE CAN USE FLAT RATE BOXES FOR BIG SAVINGS.5
|
|
|
TPG 322 INDEXABLE CARBIDE INSERT LATHE 1" BORING BAR tool holder 6-693-174
good used carbide insert boring bar mfg not marked 6-639-174 1" dia x 11" long has edge wear but insert clamps tight will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $12.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
L66 - LIVE CENTER MORSE TAPER lathe tail stock drill bit end mill boring bar
Lot 66 Live Center Make: The Improved Nielsen Morse No 5 to No 6 Huge TOOLING Auction This Week- Check out our Other Lots Shipping is only $20 Please Check out our other Great Ebay Deals on Tooling- HUGE TOOLING SALE
|
|
|
Madison 2224-003-01250, 2221-003-01125, boring, drill
Here is a lot of two different Madison tools. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. All international bidders are subject to a $20.00 fee to cover additional paperwork. All international shipments will be through the U.S. post office ONLY. Sales tax is charged for PA sales unless exempt*
|
|
|
Flynn 43T Boring Head !/2" hole 3/4" shank
Head Dia is 2 3/4" 3/4" shank 2 1/4" long. good condition
|
|
|
NMTB 50 TAPER - BORING HEAD ARBOR bar milling tool holder DEVLIEG FLASH CHANGE
good used nmtb 50 taper- boring head arbor- flash change Devlieg Microbore M50FC-ADE-1412 1" drawbar thread please check my other auctions and happy bidding! FREE SHIPPING ANYWERE IN THE USA Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Vermeer 5" 5 1/2 inch Piercing Tool Underground Missile Air Hole Boring Mole TN
Vermeer 5" 5 1/2 inch Piercing Tool Underground Missile Air Hole Boring Mole TN Click Photos to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description Vermeer 5" 5 1/2 inch Piercing Tool Underground Missile Air Hole Boring Mole TN HTML clipboard Nashville TN 615.469.1707 I will consider Reasonable offers. Unreasonable offers will not be responded to! This unit is close to 10K new. Vermeer 5 1/2" air pneumatic tool boring missile. Underground air tool made by Vermeer designed for underground utility installation. Mole is 5 1/2" wide at largest part and 4" wide for the remainder until the nose Mole is 61" long and with end hose measures 69" Comes with oiler and 50' of hose In good condition. Runs and operates great. Shipping ... moreand handling will be roughly $200 to a business address. But please email your zip code and if it is residential or business being shipped to. Local pickup is okay in Nashville TN Call with any questions 615.469.1707 Thanks for looking. Hammerhead Ditch Witch Pierce Big Shot 3" 3 4" 4 5" 5 6" 6 7" 7 inch Nashville TN inkfrog terapeak. InkFrog Analytics.
|
|
|
Lucas DeVlieg Boring Mill 36" Pneumatic T-Slotted Precision Rotary Table
Lucas- 36" x 36" Pneumatic Rotary Table- Very Clean! DESCRIPTION Lucas Machinery Division Pneumatic Rotary Table Serial Number: 36BP0489 Product Condition: USED Specifications: Lucas 36" Pneumatic Rotary Table Table Dimensions: 36" x 36" Local Pickups Local pickup is available for all items Monday thru Friday 8:30am- 4:30pm Domestic Shipments Domestic shipments are sent via UPS or USPS Priority Service. We choose the fastest most economic shipping method based on a items size. Weight, and value ratio. Items sent to Alaska& Hawaii are subject to additional charges. International Shipments We ship to all international countries. International shipments are sent USPS International Priority unless otherwise requested. Contact us for international shipping quotes. Freight Shipments Items requiring freight will be securely ... morestrapped to a pallet and loaded at no additional charge. Carriers assess an extra charge if delivery is made to residential area and/or if the service of a lift gate are required. Rigging charges may apply to items requiring special loading/shipping requirements. Your satisfaction is our highest priority! To the best of our knowledge the item is in perfect working condition. We do our very best to describe items as accurately as possible and in no way would misrepresent or knowingly sell an item that was not working. But since this item is used and at times. We do not know the history of an item, all items are sold"AS-IS" No refunds, returns, or exchanges will be given. Please contact us with any and all questions as your satisfaction is our highest priority.
|
|
|
INDEX WD370700 BORING TOOL, 5/8" SHANK, .472" MAX TOOL
INDEX WD370700 BORING TOOL. 5/8" SHANK, 472" MAX TOOL CAPACITY, WITH SIDE AND HEIGHT ADJUSTMENT. E300824 This item is in GOOD CONDITION. PAYMENT: Payment is due at time of purchase. PAYMENT TYPE: Pay Pal. CONFIRMATION: A UPS tracking number will be available via email. SHIPPING: Items will be shipped using UPS. Shipping DISCOUNTS can be given on multiple items purchased within the same time frame. DELIVERY: Item will be shipped upon confirmation of payment. FEEDBACK: Feedback will be given after item has been shipped. WARRANTY: 14 Days. 100% purchase price return privilege. Buyer will be responsible for all shipping costs. Your 100% satisfaction guaranteed. If you are looking for a specific item to bid on please let us know. THANK YOU* Check out my!
|
|
|
Assortment of 7 HSS Metal Lathe Boring bits 4" to 9" Long Not Taper National Et
This is an assortment of boring bits that came with a vintage South Bend metal lathe I purchased They are various lengths and diameters.Most say High Speed. Some say National-Detroit. others Putnam-Weldon. CSD Co. They are not tapered. They are rusted pitted and have wear and tear but are priced to sell. I'm no expert but they appear to be quite sharp for their age. Local pick-up available. I will combine shipping on multiple purchases when practical.
|
|
|
INDEX W32230 BORING TOOL HOLDER, WITH SIDE & HEIGHT
INDEX W32230 BORING TOOL HOLDER. WITH SIDE& HEIGHT ADJUSTMENT, 1" SHANK, FOR B30, B42, B60 MACHINE. I120611 This item is in GOOD CONDITION. PAYMENT: Payment is due at time of purchase. PAYMENT TYPE: Pay Pal& Money Orders/Cashiers Checks will be the only method of payment. CONFIRMATION: A UPS tracking number will be available via email. SHIPPING: Items will be shipped using UPS. Shipping DISCOUNTS can be given on multiple items purchased within the same time frame. DELIVERY: Item will be shipped upon confirmation of payment. FEEDBACK: Feedback will be given after item has been shipped. WARRANTY: 14 Days. 100% purchase price return privilege. Buyer will be responsible for all shipping costs. Your 100% satisfaction guaranteed. If you are looking for a specific item to bid on please let us know. THANK YOU* Check out my!
|
|
|
Nice Assortment Of 4 Kaiser Solid Carbide Boring Bars Great Shape
Been in Aerospace tool and die trade for over 25 years. Time to retire. Assorted lot of 4 Kaiser. Solid carbide boring bars. Lightly used. There is: 1) 615.212(1) 615.215, 1) 615.222, 1) 615.223. All are in excellent condition. If you have any questions, please ask. Thanks for looking. Posted with
|
|
|
NICE KAISER RW53 ROUGH BORING HEAD 2.087" - 2.756" RANGE W/ CAT 40
KAISER RW53 SERIES ROUGH BORING HEAD PART NO. 314.505 2.087" 2.756" 53-70) BORING RANGE KPT 10.331.550 EXTENSION KPT 11.326.451 CAT 40 ADAPTER Very good used condition. As pictured. Payment due within five days of purchase. Check. M/o, credit card, and PayPal accepted. $11.50 for USPS Priority Mail shipping with tracking. STOCK NO. A69 Thanks for looking!
|
|
|
NMTB-40 BORING HEAD, 6-1/2" GAGE LENGTH, 2" BODY DIAMETER
Inventory Number: 04130630034 Manufacturer: Description: NMTB-40 BORING HEAD. 6-1/2" GAGE LENGTH, 2" BODY DIAMETER Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, AS SHOWN BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: ... moreWe ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be functionally the same as shown, but may not be identical in appe
|
|
|
Kennametal 1-1/4" Shank Boring Bar (S20-DVUNR3)
Kennametal Boring Bar(S20-DVUNR3) Shank Diameter: 1-1/4" Overall Length: 11-3/4" Hand of Holder: Right Hand Material: Steel This item is used and comes as shown with no hardware. Will ship out one day after receipt of payment.
|
|
|
Kennametal 1" Shank Boring Bar Coolant Fed (A16-MWLNR4)
Kennametal Coolant Fed Boring Bar(A16-MWLNR4) Shank Diameter: 1.00" Overall Length: 12.00" Hand of Holder: Right Hand Material: Steel This item is used and comes as shown. Will ship out one day after receipt of payment.
|
|
|
Kennametal 1" Shank Boring Bar (B-8008)
Kennametal Boring Bar(B-8008) Shank Diameter: 1.00" Overall Length: 12.00" Hand of Holder: Right Hand Compatible Insert: NP 13 Material: Steel This item is used and comes as shown without shim screw. Will ship out one day after receipt of payment.
|
|
|
ENCO BORING/FACING HEAD
This is a used ENCO boring and facing head made in France.
|
|
|
6 PIECE MORSE TAPER, MT#2 & #3 BORING TOOLS
Inventory Number: 04130630041 Manufacturer: Description: 6 PIECE MORSE TAPER. MT#2& 3 BORING TOOLS Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 6 PIECE MIXED LOT, AS SHOWN, SEE PICTURES BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. ... moreSHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these items. The item will be functionally the same as shown, but may not be identica
|
|
|
VERY NICE WILLIAMS AGRIPPA 080 BORING TOOL HOLDER 5/16" BORING BAR TOOL 4 LATHE
Very Nice- Original Williams boring tool holder with 5/16" boring bar. Tool is stamped"NO. 080 AGRIPPA BORING-TOOL HOLDER" on one side and"J.H. WILLIAMS& CO. DROP-FORGED IN U.S.A. on the other. Adjusts to various sized bars. Shank is 3" long. 3/4" high and 5/16" thick. Boring bar is 5/16" diameter. All in very fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Lenox Self Feeding Wood Boring Bit 2 9/16"" Used
Lenox Self Feeding Wood Boring Bit 2 9/16" Used. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
EMPIRE TOOL CO. T6SR-750-8ZTCMT BORING BAR IN GOOD USED CONDITION. INSERTED BAR
Up for auction is a Boring bar in good used condition. Please ask any questions before bidding. What you see is what you get in the picture of the boring bar. No other tool hold ers or anything else included. These tools are being sold as is. Thank you for looking and good luck bidding. Manufacturer: EMPIRE TOOL CO. Insert Used: TCMT Shank Size: 750 Overall Length: 7.000
|
|
|
Valenite Solid Carbide Indexable Boring Bar, .5 Shank
We always combine shipping. Please read our policies. Below, for details. Get FREE SHIPPING when you spend $50 on two or more items! US only) Fastener quantity discounts: buy 5 packs of the same item: 5% off. 10 packs: 10% off. 20+ packs: contact us for quote. Discounts are not applied automatically. You must contact us BEFORE PAYING to get discounts. Valenite Solid Carbide Indexable Boring Bar. 5 Shank Item Description: Valenite Solid Carbide Indexable Boring Bar. 5 Shank Size/Specs: 5 Manufacturer: Valenite MFR Part# Condition: Used. See note for further info. Notes: IMPORTANT POLICY INFORMATION BELOW. PLEASE READ BEFORE BUYING. This listing is for surplus parts. As such. Parts may be dusty from sitting on a shelf or in a warehouse for a long time. Unless otherwise stated in the item description parts are unused and perfectly serviceable. ... moreSHIPPING PRICES: Click on the Shipping and Payments tab to see the shipping options and prices for this item before you buy. The shipping cost for your entire order with us is automatically calculated by the eBay shipping calculator based on the combined weight of your purchases and your chosen shipping method. The eBay shipping calculator does not know about USPS Flat Rate! If you would like your shipping priced using USPS Flat Rate. Please contact us before you pay. We ship USPS and UPS. Please pick your preferred shipping method at checkout. USPS is cheaper and generally reliable. But IS NOT TIME DEFINITE. If you need your order on or by a certain date. Please select a UPS shipping option. All UPS services are available, even if not shown in the listing. If you would like your order shipped UPS 2 Day, UPS Early AM, etc. please send us a note. If this listing has a First Class Mail shipping option. It will be the lowest cost shipping option for a quantity of one pack, but may not be the lowest cost option for higher quantities. Please be sure to check all shipping methods. If the calculated shipping cost looks high. Please ask for an invoice(Request total from se
|
|
|
Komet Micro-Adjustable Boring Head - M03 0000115 - AC5
Komet Micro-Adjustable Boring Head- M03 0000115- AC5 YOUR BID IS FOR ONE UNIT ONLY. Please feel free to email with any questions that you may have. And I will do my best to try to help. Please give us a call at 860-242-4953 to discuss payment options. All duties and customs fees to paid by bidder. We do accept personal checks. Bank checks, company checks, and bank wire transfers. SHIPPING POLICY: We sell sensitive test and measurement equipment here on Ebay. We strive for 5-star service. So we invest a great deal of time and care to package all of our items safely for shipment. This attention to detail means it may take up to 10 days for us to prepare and ship your units out of our facility. We want to support you throughout the transaction and want you to be satisfied, so please to contact us at 860-242-4953 with any questions or concerns. ... moreWe do out best to ship quickly, but never at the expense of quality delivery. RETURN POLICY: This unit is being sold as-is. The auction description is written as a guide. We strongly recommened that you come view and test the units at our facility. Feel free to give us a call at 860-242-4953, and we will help answer any questions that you may have, before you purchase an item. We do not accept returns so please call with any questions that you have BEFORE you bid.
|
|
 |