|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
$600.00 Shipping Condition: Used Location: Felton, United States The digital scale is not working. The planer is fully functional without it or the digital scale can be replaced through Powermatic. One of the locking ... morenuts that holds in the rear locking pin (for raising and lowering) is missing.
Buy It Now
$34.67 Shipping Condition: Used Location: Salem, United States Dewalt 1.5 hp single phase radial arm saw motor, wired for 115vac. Good condition, runs- unsure if it needs bearings, needs cleaning, normal wear, will ... moreneed cord replaced, with carriage.
Buy It Now
$157.27 Shipping Condition: Used Location: Bangor, United States Bearing are noisy see video but no looseness or thrust movement. Came with a 12" lathe but not sure if it ever powered it
Buy It Now
$349.99 Shipping Condition: New Location: 龙岗区, China Water-cooling 4.5KW Spindle Motor 4Bearing φ125*298mm ER25 &Bracket Pump CNC Kit Package Included : 1 x 4.5KW Spindle Motor ER25 1 x 5KW VFD Inverter ... morewith cable for panel (parameters are presetted) 1 x Mount Bracket 1 x Pump/Pipe 1 x ER25 Collet Set 3/3.175/6.35/10/12/12.7/13/16mm 220V 10A 4.5KW 1.78NM ER25 400Hz 24000rpm Size: φ125*298 MM Bearings:4pcs Cooling: Water-cooled Fit for Wood Engraving.
Buy It Now
Free Shipping Condition: New – Open box Location: Pearland, United States
Buy It Now
$90.00 Shipping Condition: New Location: Maricopa, United States IBC Tote Style Mixer Mount. IBC Tote Agitator-Mixer 1/2 HP Single Phase Direct Drive. IBC Tote is Not Included (Had to state it). 32" X 5/8" Stainless ... moreSteel Mixer Shaft. Standard 115V Single Phase 3 Prong Grounded Plug with In Line On/Off Switch.
Buy It Now
$13.00 Shipping Condition: New Location: Huntington Beach, United States Power : Single phase, AC. Industrial Use. Our Part # ALL-45013651.
Buy It Now
$11.60 Shipping Condition: New Location: Ontario, United States Forward / Reverse / Stop switch for single phase (1PH) motor. Can fit EISEN milling machine with single-phase motor and similar milling machines from ... moreTaiwan with single-phase motor.
Buy It Now
Free Shipping Condition: New Location: Cleveland, United States U.S. Solid 15KW 30-80KHz High Frequency Induction Heater Furnace LH-15A 220V. • With 100% load design, can work in 24 hours without stop. The higher the ... morefrequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States DIN Rail Mount. Universal input for worldwide applications: 100 to 240 VAC (85 to 264 VAC). Power, Output. Operation temperature range: –25 to 60 °C. ... moreFlexible installation by special mounting brackets.
Buy It Now
$146.43 Shipping Condition: New Location: Fort Wayne, United States This is a complete kit to convert your Bridgeport 3-phase motor to a Single Phase. This kit includes a new Baldor 1-1/2 HP Single Phase motor that can ... morebe wired to either 220 or 110, 2 Required Mounting Brackets, Mounting Hardware and Installation/wiring Instructions.
Buy It Now
Free Shipping Condition: New Location: Folsom, United States This is anunopened U.S. Solid 15kW High Frequency Induction Heater Furnace Single Phase 110V.
Buy It Now
$400.00 Shipping Condition: Used Location: Manchester, United States Bought this machine to do some cylinder head work and it works great, everything works as it should. Air table locks and travels as it should, head fixture ... morehas a riser to roll heads over. Have minimal tooling but what i have is included. Machine is set up to run on 220V Single phase power and that converter can come with the machine also can use without converter to use on 3 phase power. Will be taking a walk around running video of the machine this week.
Buy It Now
Free Shipping Condition: New Location: United States Specifications: Model: HT-15A Output power: 15 KW Output current: 200 - 600 A Fluctuating frequency: 30 - 100 KHZ Heating time: 1-99 s (auto) Input voltage: ... moreSingle phase 110V, 50 HZ Flow rate of cooling water: 0.06-0.12Mpa, 7.5 L / min Water temp. protection point: 104 ℉ (40 ℃) Max.
Buy It Now
$17.78 Shipping Condition: Used Location: Mount Sterling, United States Manufactured by YOKOGAWA. Manufacturer Part Number: 2041. The product images shown are for illustration purposes only and may not be an exact representation ... moreof the product you will receive. IMS has a specialized resale program for manufacturers!
Buy It Now
Free Shipping Condition: Used Location: Wooster, United States Including, but not limited to, using alternative products. We would be more than happy to correct any issue. WE WILL correct any potential problem. We ... moreget our inventory from local manufacturers and liquidators.
Buy It Now
$95.00 Shipping Condition: New Location: Maricopa, United States IBC Tote Agitator-Mixer 1/2 HP Single Phase Direct Drive. IBCTote Style Mixer Mount. Mountto your IBC Tote, and secure in place. IBC Tote is Not Included ... more(Had to state it). 32"X 5/8" Stainless Steel Mixer Shaft.
Buy It Now
$300.00 Shipping Condition: Used Location: Bristol, United States Shipping is just an estimate, so contact me first and quote if interested. It will be shipped on a pallet by truck via freight. Local pickup is always ... morewelcomed. Check out my other listings as well. Thank you for looking
Buy It Now
Condition: Used Location: North Tonawanda, United States The shifters are disabled and it was converted to 110 single phase. I also need to know if you have a forklift or loading dock. If you don’t that’s ok ... morebut a lift gate will be required and cost will go up.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Powermatic 115V/230V 6" 54HH Single Phase Jointer Helical Cutterhead - 1791317K. SKU 1791317K. Type of Cutterhead Helical. Cutterhead Speed 6000 RPM. ... moreJointer Bed Weight 254 lbs. Motor Phase Single Phase.
Buy It Now
Condition: Used Location: Boise, United States Your Source for Spares & Repairs. (See Hours of Operation, above). REQUIRED BY US LAW. Two-zero-eight-nine-eight-two-one-eight-six-two Direct Line. Five-one-two-nine-two-eight-five-five-five-three ... moreCorporate Office.
Buy It Now
$34.78 Shipping Condition: Used Location: Salem, United States Good condition, need cleaning, normal wear, runs smoothly.
Buy It Now
Free Shipping Condition: New Location: Columbus, United States IMPORTANT: Static Converters do not produce constant 3-phase power; they “jump-start” your 3-phase motor to run on single-phase power. Be sure to read ... moreall information provided. This enables the use of high HP motors where previously not thought possible.
Buy It Now
Condition: Used Location: Middlebury, United States Country of Manufacture: United States. Prefer to pick it up yourself?. Will there be a dock or forklift. Size: Length: 28 in. Width: 32 in. Height: 53 ... morein. Need it urgently?. Call us and we will do what we can to get it to you quickly.
Buy It Now
Condition: New Location: Irvine, United States MH-V100.1PH: VARIABLE SPEED 3HP MILLING HEAD 220V 1PH. MH-V100.1Phase 220V 1PH 3HP R8 Variable Speed 70-4200 rpm. MH-V100 220V 3PH 3HP R8 Variable Speed ... more70-4200 rpm. MH-V200 220V 3PH 3HP R8 Step Pulley 80-5600rpm.
Buy It Now
$88.40 Shipping Condition: Used Location: Ashby, United States Works great 1/2 Hp Peerless Centrifugal Blower. Condition is Used. Shipped with FedEx Ground or FedEx Home Delivery. Some surface rust in spots from long ... morestorage . Very heavy
Buy It Now
$189.95 Shipping Condition: Used Location: Wolcottville, United States Tested and works as it should. About 17" of travel .
Buy It Now
Free Shipping Condition: New Location: China
Buy It Now
$48.00 Shipping Condition: Used Location: Poland This is a complete engine kit for Hobbymat MD65 in excellent working condition. Single-phase 220 V (of course it will work fine at 230 and 240 V).
Buy It Now
$94.67 Shipping Condition: New – Open box Location: Fleetwood, United States The Flo-Tite Flanged Series are designed as a split body, two-piece construction, to allow ease of access for maintenance of the valve ball and seat without ... morespecial tools. This line of valves utilizes the “free floating” ball principle.
Buy It Now
$105.00 Shipping Condition: New Location: Maricopa, United States IBC Tote Style Mixer Mount. IBC Tote Agitator-Mixer 1/2 HP Single Phase Gear Drive. IBC Tote is Not Included (Had to state it). 32" X 5/8" Stainless Steel ... moreMixer Shaft. Nord Gear Reducer 350 RPM (It is a right Angle).
Buy It Now
Free Shipping Condition: New – Open box Location: High Point, United States Duty cycle (120V): 70A@40% (Stick); 90A@40% (TIG); 90A@40% (MIG). Multi-process welder with MIG/TIG/STICK and spool gun capability. Box was opened to ... moreinspect the product, which shows no signs of prior use or wear.
Buy It Now
Free Shipping Condition: Used Location: Cumberland, United States This industrial sewing machine comes equipped with a powerful 1/2 HP clutch motor that operates at 110V and 1725 RPM, making it perfect for heavy-duty ... moresewing tasks. The machine is designed with a single head and features a mechanical control system, providing precise control over the sewing process.Made in Japan, this machine is of high quality and is suitable for use in various industrial settings. Whether you're working with textiles or apparel, this sewing machine is sure to provide reliable performance for all your sewing needs.Tested and works great!
Buy It Now
$21.35 Shipping Condition: Used Location: Richmond, United States Bench Mount Industrial Power Demagnetizer 110V Single Phase AC 4-1/2" x 6-3/4" Tested Works
Buy It Now
Free Shipping Condition: New Location: Ontario, United States SKU 1353001. Powermatic 115V/230V 6" 54HH Single Phase Jointer Helical Cutterhead - 1791317K. Motor Phase 3. Motor HP 2. Self-locating ergonomic spindle ... morelock design for easy, one handed operation. why buy from us?.
Buy It Now
$14.51 Shipping Condition: New – Open box Location: Grand Rapids, United States Manufactured by MAGNELAB. The product images shown are for illustration purposes only and may not be an exact representation of the product you will receive. ... moreIMS has a specialized resale program for manufacturers!
Buy It Now
Condition: Used Location: Lenapah, United States Has updated Baldor 1/3 HP Motor. 3 Speed via belt change. Needs a new dampening shock. The old one on it no longer works.
Buy It Now
$5.50 Shipping Condition: New Location: Freeland, United States The switch is both UL listed and CSA stamped. The price listed is for one 220V, double pole, single phase switch.
Buy It Now
Condition: Used Location: Berea, United States This is a very good Roto - Phase 15-45 hp rated I have used for my lathes and my radial drill presses it worked great takes single phase 220 volt and ... moremakes 220 volt Three phase power. I have retired no longer need as you can see this a good size machine I can ship it to you but buyer will have to pay for grating and shipping buyer should contact seller to make those arrangements
Buy It Now
Free Shipping Condition: New Location: Chino, United States Pump Power: 370w. Tig Welder Torch Industrial Water Cooler Torch Welding Water Tank 110v. This Cooling Tank Is Designed for Use with Tig Welders to Provide ... morePowerful Cooling. 1 Welder Water Cooler. The Design of the Cooling Circulating Water Tank Structure Is Reasonable and Convenient to Use.
Buy It Now
Free Shipping Condition: For parts or not working Location: Vallejo, United States Phase Metrics Lamphouse 038050100B 60 Hz. Single Phase Arc Lamp Source Description Phase Metrics Lamphouse 038050100B 60 Hz. Single Phase Arc Lamp Source ... moreWorking system includes Hamamatsu L2195 150W Lamp Manufacturer Phase Metrics Manufacturer Part Number Lamphouse 038050100B Item/Ship Weight 60 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300. Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping We will professionally package. Using instapak foam-in-place if needed, and insure this product for safe delivery. Domestic shipping rates are available using the shipping calculator below, subject to terms& conditions. Please contact us for international shipping rates. Local pickup is encouraged for which all shipping and handling fees will be waived PID 40490 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though the package is too large to qualify. As such. We may need to contact you before shipping to make an adjustment to a different method which may change the price for shipping as well. Th
Buy It Now
$26.30 Shipping Condition: New Location: Circleville, United States ITEM IS NEW IN BOX.
Buy It Now
$5.50 Shipping Condition: New Location: Freeland, United States The switch is both UL listed and CSA stamped.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. VEVOR 300MM Linear Scale For Milling Lathe Machine Accuracy Grinding Linear. 550W Forceful Motor & Variable Speed & Sturdy Nylon Gears. ... morePower of Motor: 550W DC Single Phase. Through high frequency quenching process and precision grinding of high-quality cast iron bed.
Buy It Now
$77.91 Shipping Condition: For parts or not working Location: Venice, United States Disc Sanding Machine. Wheel has minor wobble on start up (see video). Sold As-Is. 155 Center Ct, Venice, FL 34285. Industry Recycles.
Buy It Now
Condition: Used Location: Glassboro, United States Small orders are no problem.
Buy It Now
Condition: Used Location: Lenapah, United States All works as it should. Includes the dust collector. All products are as is.
Buy It Now
Condition: Used Location: Pomona, United States Atrump B3EC CNC Vertical Bed Mill 31.5" x 16" x 20" #6621 #1. Spindle Power: 3 HP, Single Phase, 220 Volt. Speed Range: 70- 4,000 RPM. Spindle Nose to ... moreTable (Min. : 3.125″ – 23″. Y-Axis Travel: 16″. ).
Buy It Now
Free Shipping Condition: New Location: United States Inpute phase:1 phase or 3 phase. Outpute phase:3 phase. Input Frequency:48-63HZ. Outpute Frequency:0-400HZ. With perfect error protection and short circuit ... morestarting protection capability;. Basic Connection Diagram.
Buy It Now
Condition: Used Location: Middlebury, United States Tested and works as it should Wired and tested at 220V. MPN: Model 66. Prefer to pick it up yourself?. Will there be a dock or forklift. Size: Length: ... more80 in. Width: 40 in. Height: 38 in. Need it urgently?.
Buy It Now
Condition: Used Location: Muscle Shoals, United States Newton Dual Spindle, Horizontal Boring Machine. This machine is used but seems to be in good overall condition for its age. All moving parts operate freely. ... moreThe drive motor runs smoothly and there is no excess noise from the motor or spindle blocks that would indicate bearing issues.
Buy It Now
$160.50 Shipping Condition: Used Location: Oakland, United States It has a power source of 120/240 and is ideal for light industrial use. It is in near mint condition and has been tested for optimal performance.
Buy It Now
$182.09 Shipping Condition: Used Location: Glassboro, United States Small orders are no problem.
Buy It Now
Free Shipping Condition: New Location: Columbus, United States IMPORTANT: Static Converters do not produce constant 3-phase power; they “jump-start” your 3-phase motor to run on single-phase power. Be sure to read ... moreall information provided. This enables the use of high HP motors where previously not thought possible.
Buy It Now
$29.18 Shipping Condition: Used Location: Canada
Buy It Now
Free Shipping Condition: Seller refurbished Location: State College, United States 3chamber uses vertical air flow with convection style heating and has a temperature range of -184°C to 315°C (using LN2) and -73°C to 315°C (using LCO2). ... moreBuilt in IEEE-488 (GPIB), RS232/RS422 remote interfaces are standard features on the EC12 chamber.
Buy It Now
Condition: Used Location: Middlebury, United States Single Phase Only. Tested and works as it should. Prefer to pick it up yourself?. Need it urgently?. Call us and we will do what we can to get it to you ... morequickly. To get a freight quote we will need to know the following.
Buy It Now
$175.12 Shipping Condition: Used Location: Coffeyville, United States 230 AMP @ 25 ARC VOLT. A-B ALLEN BRADLEY 709-DOD103 SER. SINGLE PHASE. DUAL RANGE. 15" X 15" X 20" OAL.
Buy It Now
$250.00 Shipping Condition: New Location: Gilbert, United States Knight KSH250-2301 Single Phase Servo Hoist 250lb Cap. Knight's KSH Servo Hoist Series allows for many application solutions due to its various programmability ... morefeatures. The KSH Series enables an operator to simply grasp the handle and move the load, eliminating push buttons.
Buy It Now
Free Shipping Condition: New Location: Chino, United States This portable, air-cooled spot welder makes quick, strong spot welds in a wide range of materials including steel and cast iron. Welds uncoated mild, ... moregalvanized or stainless sheet steel. The spot welder has 6 in.
|
|
|
|
CM,MSC 7 X 12 HORIZONTAL OR VERTICAL BAND SAW WITH COOLANT 110V SINGLE PHASE 1HP
THIS AUCTION IS FOR A USED CENTRAL MACHINERY.MSC,VECTRAX,JET 7" X 12" HORIZONTAL& VERTICAL METAL CUTTING BANDSAW. THIS IS A GOOD WORKING SAW! NEW GUIDE ROLLERS! SAW CAN ALSO BE USED AS A VERTICAL BANDSAW! 7" X 12" MODEL:93507. Instantly change from horizontal to vertical position•Heavy cast iron base with quick lock vise•Hardened& ground worm gears•Hydraulic feed& coolant system•Automatic shut-off& 5" casters•Equipped with 12" x 12" Vertical table*Roller bearing guides*Swivel vise CUTTING CAPACITY: ROUNDS: 7" at 0 Degrees/ 5" at 45 Degrees SQUARES: 7" x 12" at 0 Degrees/ 4-3/4" x 4-7/8" at 45 Degrees SPECIFICATIONS: BLADE SPEEDS( FPM) 86. 132,178, 260 BLADE SIZE: 93" x 3/4" x 0.032" MOTOR: 1 HP. 110/220V. 1 PHASE.PRE-WIRED 110V NET WEIGHT: 330 ... moreLBS DIMENSIONS: 49" L x 17" W x 38" H I WILL LOAD ON YOUR TRUCK OR TRAILER FOR NO CHARGE. ANY CRATING THERE WILL BE EXTRA CHARGES. PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. FOR SHIPPING QUOTE PLEASE SEND A COMPLETE ADDRESS! IF ITEM IS BEING SHIPPED TO A BUSINESS OR RESIDENTIAL? WITH DOCK OR FORKLIFT? OR IF YOU WANT TO PICK UP AT FREIGHT TERMINAL. PLEASE CHECK OUT MY AUCTIONS. YOU BUY AS IS. I WILL COMBINE AUCTIONS TO SAVE ON SHIPPING. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ROLL IN SAW VERTICAL BAND SAW MODEL,1 Hp BALDOR SINGLE PHASE,EXCELENT
Roll In Saw This Roll In Saw is in very nice shape. 1 HP Baldor 115 volt Motor. we ran it and it runs good. Thank you for your Business! We can ship! God Bless!
|
|
|
Grob Brothers Vertical Band Saw Type NS24 28" x 24" Table 220v SINGLE PHASE
Grob Brothers Vertical Band Saw Type NS24 28" x 24" Table 220v Single Phase Machine No. 636 24" Throat Depth Weight: 1160 lbs( 040513.1/2 AB) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This ... moreis somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your
|
|
|
Delta Rockwell 6" Band Saw, 15" Throat, Single Phase, 440V.
Delta Rockwell 6" Band Saw 15" Throat Single Phase 440V Category: Sawing Machines Sub Category: Vertical Band Stock No. 4962 Serial# 82-632 Location: Fullerton. CA. Table 14" x 14" Throat 15" Electrical Requirements 440V/ 50/60 Hz/ 1-PH Approx. Dimensions 29" x 18" x 66" Price… $550.00 Contact Information: ACT Machinery 714-441-1992 PLEASE SEE TERMS AND CONDITIONS BELOW Machines are subject to ACT Inc’s terms& conditions below and notes: The goods sold are second hand goods and ACT. Inc. Therefore makes no warranty of any kind, and sells goods“As is, As inspected, And“With all faults” ACT, Inc. makes no warranty of any kind whatsoever, specifically any warranty of merchantability or fitness for a particular purpose. ACT, Inc. disclaims any reliance by buyer on ACT Inc’s skill, or judgment to select ... moreor furnish the goods for any particular purpose, expressed or implied. Customer is responsible for all shipping& rigging costs. STANDARD TERMS AND CONDITIONS OF SALE TERMS: All payments must be received within 10 business and prior to shipment of machine. All sales in CA are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such a tax. PAYMENTS: We will email you an invoice for the full amount owed. Including shipping. Please Do Not Pay until you have received our invoice. Items not paid within 10 days from the end of sale. Will be re-listed. Payments by check will be held for 10 business days until check clears. ACT Inc. accepts all major credit cards with a 3% Surcharge: Visa. Master Card, and American Express. We also accept Pay Pal as payment of goods purchased and payment upon pickup. SHIPPING; Customer Is Responsible For All Packaging. Shipping& Rigging Costs. No International Shipping. Freight costs to be quoted at time of sale from zip code 92831. Local pickup is ok.
|
|
|
DOALL C916M HORIZONTAL BAND SAW SWIVEL VISE COOLANT SINGLE PHASE W/ROLLER TABLE
THIS AUCTION IS FOR A USED DOALL C916M HORIZONTAL BAND SAW METAL CUTTING BANDSAW. THIS SAW IS SINGLE PHASE 115/230 VOLT! COMES WITH QUICK ACTING VISE.STOCK TABLE AND FEED ROLLER TABLE ABOUT 5 FEET LONG! GREAT FOR HOME OR SHOP! HEAVY DUTY. I HAVE THE OWNER MANUALS FOR THIS SAW! PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. THE NICE THING ABOUT THESE SAWS NO GEAR BOX! THAT YOU HAVE TO WORRY ABOUT CHECKING! THIS SAW HAS A VARIABLE SPEED PULLEYS THAT DRIVES A GEAR SHAFT THAT DRIVES THE LARGE BAND WHEEL! SIMPLE! SAW IS IN GOOD WORKING CONDITION. THIS SAW HASN'T BEEN USED MUCH! ALL ORIGINAL PAINT! MODEL: C-916M S/N 438-85312 Nominal Capacity(H x W) 9" x 16" Nominal Capacity Round Stock. 10-3/4" Variable Blade Speeds. 105- 275 FPM Maximum Blade Width. 1(159" LONG BLADE) Motor. 2 HP Electrics. 115/230 v(WIRED ... more230V NOW) Approximate Dimensions. 55" X 88" Approximate Height. 59" Approximate Weight. 1200 Lbs. SAW GUIDES ARE SPRING LOADED SOLID CARBIDE INSERTS BLADE BRUSH SWIVEL VISE JAWS COOLANT SYSTEM STOCK TABLE ROLLER CONVEYOR TABLE I WILL LOAD ON YOUR TRUCK OR TRAILER FOR NO CHARGE. ANY CRATING THERE WILL BE EXTRA CHARGES. PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. FOR SHIPPING QUOTE PLEASE SEND A COMPLETE ADDRESS! IF ITEM IS BEING SHIPPED TO A BUSINESS OR RESIDENTIAL? WITH DOCK OR FORKLIFT? OR IF YOU WANT TO PICK UP AT FREIGHT TERMINAL. PLEASE CHECK OUT MY AUCTIONS. YOU BUY AS IS. I WILL COMBINE AUCTIONS TO SAVE ON SHIPPING. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VERY NICE SEAL TECH 40" BANDSAW MODEL 4848 51" X 84" TABLE SINGLE PHASE 115 VOLT
VERY NICE SEAL TECH 40" BANDSAW MODEL 4848 51" X 84" TABLE SINGLE PHASE 115 VOLT Prev Stop Play Next SquareTrade © AP6.0 You are bidding on a Seal Tech Bandsaw. Model: 4848. This is a very nice bandsaw in good condition and it is fully guaranteed. 40" Bandsaw 51" X 84" Table Table Travel Single Phase. 115 Volts We would be happy to help load on your truck at no charge. Or we can assist in planning the most economical delivery. Any questions? Email us NO RESERVE Please click here to see my other auctions.
|
|
|
8” x 16” Kalamazoo Horizontal Band Saw, Model 8CD, Single Phase
8” x 16” Kalamazoo Horizontal Band Saw. Model 8CD. S/N 2893791 Machine Specs: Capacity Round 8” Rectangle 8” x16” Blade Size 3/4” x130” Motor HP 1 HP 110/220 Volt Single Phase Blade Speeds 50. 75, 160 and 275 FPM Equipped: Stock Stop Single Phase Motor Runs Well. Hydraulic Cylinder works as it should Inspect Under Power in Our Warehouse Questions Call Dave@ 908-399-8133
|
|
|
#7AW KALAMAZOO 7" X 10" Horizontal Band Saw (New 1988) Single Phase Electrics
Preowned 7" x 10" KALAMAZOO Horizontal Band Saw. Model: 7AW, S/N 11569(New 1988) Capacity. Round flats Blade size. Standard maximum(3) Blade speeds Bed height 7" 7" x 10" 7'5" long x.025" thick x 1/2" wide 7'5" long x.032" thick x 5/8" wide 50. 90, 155 F.P.M. 22" Equipped With Manually operated swivel vise to 45° for miter cutting Manual blade tension Built-in coolant system with pump motor and tank 3/4 H.P. 1/60/115-208-230 volt drive motor Machine is wired for single phase operation Machine is mounted on casters for portable use. Approximate Weight: 200 Lbs. Approximate Dimensions: 50" L-R x 22" F-B x 37" H, F.O.B. Truck. Hauppauge- Long Island, NY)
|
|
|
LOVEJOY SHOP VERTICAL BANDSAW CHICAGO USA 230V SINGLE PHASE
Paypal. Visa, Mastercard, American Express. In order to promote a great transaction please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. Standard shipping or local pickup is available. Please use the freight shipping calculator to the right to calculate freight shipping which only has the freight carrier's standard insurance. If you require your item to be fully insured for ... morethe freight shipment please email us indicating that so we can total your invoice with shipping and the additional insurance. PA State sales tax applies to all local pickups unless you have a tax exemption form with you at the time of pickup. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. LOVEJOY SHOP VERTICAL BANDSAW CHICAGO USA 230V SINGLE PHASE We have a video above of the bandsaw operating; press play. DESCRIPTION: ~ Up for bid is a good working Lovejoy(Chicago. USA) shop bandsaw. 230V"single phase" powered. The freight shipping weight is 865lbs on a secured pallet. If picking up locally. We can load your vehicle with the forklifts. We palletize and/or load the freight trucks for free. Freight Shipping Calculator Fill out the fields below and press the orange button to get instant rates. Enter Your U.S. Zip Select Location Type Business with Dock or Forklift Business without Dock or Forklift Construction Site Convention Center or Tradeshow Residence Terminal The quote is a"rough estimate" for freight shipping. It take
|
|
|
JET 14" VERTICAL BAND SAW SINGLE PHASE W/BLADE WELDER DoALL GROB AMADA
HERE IS A VERY NICE RUNNING JET VERTICAL METAL CUTTING BAND SAW. THIS SAW CAN BE INSPECTED IN MPLS MN. TO SET UP AN INSPECTION. PLEASE CALL JIM@ 952-931-7974. THANK YOU. GENERAL SPECIFICATIONS: Have: Jet Vertical Bandsaw 1 phase 115v Model: VBS-1408 Complete With: Variable Speed Blade Welder and Work light Specifications: Blade Length(in. 1/2 X 114 Blade Size(in. 1/8- 1/2 Blade Speeds(SFPM) 82- 330 Blade Width(Min-Max/ in. 1/8- 1/2 Cutting Capacity Height(in.8" Throat Depth(in. 14" Welder(KVA) 1.5 Table Height at 90 Degrees(in. 39 Table Size(in. 20x20 Table Tilt(deg. 8 F& B. 12 L& 15 R Motor: 1Ph. 115V Net Weight: 643# Overall Dimensions: 34" x 24" x 68-1/2" PRICE LOADED ON YOUR TRUCK.$2650. SOLD AS IS- AS INSPECTED.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1418e841d85-0xf7-
|
|
|
Wells Single Phase Horizontal Metal Band Saw 58B
Wells Single Phase Horizontal Metal Band Saw 58B Quantity Available: 1 Shipping Weight: 600 lbs(10.3.13.8 W1) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional ... morecharge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please call
|
|
|
9" x 12" Kalamazoo Horizontal Band Saw, Model 9AW, 115 Volt Single Phase
9” x 12” Kalamazoo Horizontal Band Saw. Model 9AW, S/N 3277 Capacity Round 9” Rectangle 9” x 12” Blade Size 3/4” x.035 x 130” Motor 1 HP 115 Volt Single Phase Blade Speeds 50- 225 FPM Runs well and Hydraulic Cylinder works as it should Inspect under power in our Branchburg NJ Warehouse Questions Call dave@ 908-399-8133
|
|
|
CAROLINA 7X12 METAL BANDSAW HORIZONTAL AND VERTICAL SINGLE PHASE
CAROLINA 7X12 METAL BANDSAW HORIZONTAL AND VERTICAL SINGLE PHASE CAROLINA 7X12 METAL BANDSAW HORIZONTAL AND VERTICAL SINGLE PHASE. THE BANDSAW IS IN GREAT SHAPE. IT CONVERTS FROM HORIZONTAL TO VERTICAL IT HAS A 3/4 HP SINGLE PHASE 110V MOTOR. THE SAW WILL SHIP VIA FREIGHT SO PLEASE EMAIL ME YOUR ZIP CODE AND IF IT IS GOING TO A HOUSE OR BUSINESS AND IF YOU HAVE A FORKLIFT TO UNLOAD IT. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14317b925bc-0xd9-
|
|
|
16" Thrt 10" H DoAll CONTOUR MASTER VERTICAL BAND SAW, 1.5 hp Single Phase,
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 16" Thrt 10" H DoAll CONTOUR MASTER VERTICAL BAND SAW. 1.5 hp Single Phase, Ref# 152421 iammdna XSAWVB 16" DOALL VERTICAL BAND SAW MODEL: CONTOURMASTER S/N: 412563 MFG: 1940'S SPECIFICATIONS: ... moreTHROAT DEPTH. 16" MAXIMUM HEIGHT UNDER GUIDE. 10" BLADE SPEED VARIABLE. 50- 375 FPM. TABLE SIZE. 20-1/2" X 20-1/2" APPROX DIMENSIONS. 40" x 40" x 80" APPROX WEIGHT. 1000 LBS. EQUIPPED WITH: DOALL BLADE WELDER.GRINDER- WEIGHT TYPE FEED. TILTING TABLE. MITERING ATTACHMENT. WORKLIGHT. 1-1/2 HORSE POWER SINGLE PHASE MOTOR. INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE CONDITION: EXCELLENT* Machine Location: HARRISON. NJ Click Here For More DoAll Machines Click Here For More Saws- VERTICAL BAND SAWS(s) Questions about this Machine? Call David at(800) 873-6224 ext 7570 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one of the world's largest machinery dealers. In business since 1971. All used items bought from our eBay store are covered by a standard MDNA(Machinery Dealer's National Association) 30 day return privilege. Which means you can return an item you are dissatisfied with for a full refund. Please for complete details on how this
|
|
|
Wilton Horzional Bandsaw Single Phase 220V S-18 807005 7020
856-881-3185 SKU: KH102 Wilton Horzional Bandsaw Single Phase 220V S-18 807005 7020. Brand: Wilton Condition: Used Model: 7020 Lot# KH102 W1 Century AC Motor A.O Smith 1.5HP 1745RPM 7-355168-02 We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 7:30 AM- 4:30 PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges ... morewhich are charged by the carrier. This is something we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECEIVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:00 pm EST, to speak with a Customer Service representative who
|
|
|
18” Grob Vertical Band Saw, Model NS-18, Single Phase
18” Grob Vertical Band Saw. Model NS-18, S/N10493 Machine Specs: Throat 18” Max Cutting Height 12” Table Size 24” x 24” Tilts right and Left Blade Speeds(10) 50- 2030 FPM Main HP 1 HP 220 Volt Single Phase Blade Width- 1/16” 1” Blade Length 144” Equipped With Blade Welder Work Light Runs Very Well Inspect Under Power in Our Branchburg NJ warehouse Questions Call Dave@ 908-399-8133
|
|
|
WELLS HORIZONTAL BANDSAW MDL 58B 7" X 9" 115V SINGLE PHASE
WELLS HORIZONTAL BANDSAW MDL 58B 7" X 9" 115V SINGLE PHASE. RUNS GOOD/ WORKS GOOD Customer service is very important to our business. We continually strive to improve our services in order to meet our customers’ expectations. Combined shipping is provided whenever possible to help save our customers money for multiple item purchases. If you are concerned you purchased the wrong item? If you would like to know where you package is in transit? If you have an issue with an item you received? BEFORE opening an Ebay case PLEASE contact us directly to resolve any concerns or issues you may have. Our business hours are Monday- Friday 8:00am thru 5:00pm and you can reach us at 256-395-0077
|
|
|
Band saw metel cutting-220 Single phase
Band saw metal cutting. Lots of other tools.Pick up suffolk co. ny-Kings park ny. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-14a17b97d0e-0x105-
|
|
|
DoAll 16" Very RARE 230V SINGLE PHASE ! Model V-16 variable/vertical bandsaw
thank you for looking. we sell everything at or below fair market value. Compare& shop around.then check our score. This is a rare V-16 DoAll Variable Speed 16" Verticle Band Saw. Rare 230 Volt Single Phase Industrial Rating Made in AMERICA! No faux rated imported non industrial items here Everything on the saw runs as it should. Straight& true variable speed There a part or two on the welder that needs replaced. Free demo with a little notice please. Free loading to your truck or trailer.send your pre-paid trucking company and we will load it for free after your payment clears our bank. If you need this item mounted to a pallet. Lithium coated& wrapped and $175. If you have any questions. Ask before you BID. 317-760-8766 my name is Patrick. Once you BID. Complete the ebay confirmation process we have all of your information. ... moreGet permission to BID. Have your money ready too. No checks of any kind No payments No trades We can store for free for up to 30 days after payment. Tell your shipping company the zip code is 46112. Our property is big truck ready. We load for free! PayPal for partial payment. Wire transfer or cash works best. We can ship just about anywhere! Buyer pays all shipping! We have been here on ebay since 1999& check our rating. please check out our other items. This is not a recycle for scrap piece or for parts item like some listed here! This DoAll works GREAT! thank you
|
|
|
Doall vertical band saw single phase 18" throat blade welder
This is a very old DoAll bandsaw wired 220v single phase. It has an 18" throat. It has a blade welder which I have never used and do not know if it works. I have used this saw for the past 4 years for basic sawing of brass and some steel. It has always been reliable for me. But I have recently upgraded to a larger DoAll and don't need 2 saws. I would prefer local pickup but can secure to a pallet for shipping if needed. Ships via freight at expense of buyer.
|
|
|
8" X 18" KALAMAZOO HORIZONTAL BANDSAW, 1 HP, SINGLE PHASE, AUTOMATIC SHUTOFF
HERE WE HAVE A USED. 8" X 18" KALAMAZOO HORIZONTAL BANDSAW. 1 HP. SINGLE PHASE. AUTOMATIC SHUTOFF. I HAVE OVER 1000 ITEMS IN MY E BAY STORE. IF YOU CAN NOT FIND WHAT YOU WANT. JUST ASK, Visit store: G and G MACHINERY If you have any questions contact Gerry at 727-547-0616 E-mail gmachine@tampabay.rr.com WE WELCOME INSPECTIONS AND CUSTOMER PICK UPS WE COMBINE SHIPPING WHEN POSSIBLE! WE ACCEPT ALL MAJOR CREDIT CARDS! BUYER I offer an exclusive thirty-day return privilege. If you are not satisfied with your purchase. Simply send the item back in its ORIGINAL condition for a refund. Buyer is responsible for ALL shipping charges including return shipping. shipping charges are NON-REFUNDABLE. Once the payment is completed for both the item and the shipping, and the item is shipped, YOU, the BUYER, are now responsible, along with the shipping ... moreservice provider for the item. G&G Machinery has no further obligations to the item. This return privilege is not a warranty. Option to repair is at dealer's discretion. G& G Machinery is not responsible for third party charges, such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. Our return privilege does not apply to items on consignment or discounted below the reserve OR BUY-IT-NOW price. You are buying from a professional with 48 years in this business. We specialize in reliability and quality and we back our equipment with a thirty day return privilege to assure your satisfaction. Bid with confidence!
|
|
|
DoAll DBW-15 bandsaw blade welder band saw 240 1 single phase
Nice bandsaw blade welder. Please feel free to ask questions.
|
|
 |