Buy It Now
Condition: Used Location: Elkhart, United States One(1) Used Geo. Open Back for Marking Long Bars or Special Feed Installation. Marking Capacity - 3 Lines: 1/4". Die Slide Stroke: 3/8" - 7". Full Hydraulic ... moreOperation. the Machinery Dealers National Association (MDNA).
Buy It Now
Condition: Used Location: Muskegon, United States All machine sales are subject to machine availabilty. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only. ... moreStroke: 6". Slide Area: 90" x 17". Speed: 60 SPM.
Buy It Now
Condition: Used Location: Holland, United States All machine sales are subject to machine availabilty. Catalogue Specifications Capacity: 220 Ton. Unless specifically stated in writing by PMS, all freight ... morecarriers must use flat bed truck only. Slide Stroke: 5.51".
Buy It Now
Condition: Used Location: Alto, United States Asset # 14361. Capacity – Pressing 75 Tons. Stroke 60”. Swing out Bolster 90 Degrees. Swing Down Bolster 10,000 lbs. Ram Speeds – Pressing 30 IPM. We ... moreare always looking to buy machinery 1 piece or entire plants.
Buy It Now
Condition: Used Location: Perrysburg, United States Stroke: 2". Push Buttons. NOTE: No Base (Stand) Included. Capacity, Approx.: 18 Tons. Bottom Die Rail Length: 16". Top Die Rail Length: 10".
Buy It Now
Condition: Used Location: Mansfield, United States MINSTER PULSAR STAMPING PRESS. CAPACITY. . 60 TON. LENGTH OF STROKE. MOTOR. 30 HP, 90 VOLTS. S.P.M. 1 - 1000. BOLSTER. . 36" X 23". 230/460 VOLT 3 PHASE.
Buy It Now
Condition: Used Location: United States Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Rec# 3396(1) Used 75 Ton DAKE#27-153 Four Post ... moreHydraulic Down Acting Press; S/N 142775 Specifications: Capacity.75 Tons(downstroke) 35 Tons(upstroke) Bed Area.41" x 41" Ram(Slide) Area.41" x 30" Distance Between Posts.30" L-R x 30" F-B Stroke of Ram(Slide)24" Adjustable Daylight Opening.24" Distance Floor to Bed.36" Tie Rod Diameter.3" Number of Ram Cylinders.1 Type of Ram Cylinders.Double-Acting Diameter of Ram Cylinder.5" nominal) Ram(Slide) Speeds: Pressing.42 IPM Advance.110 IPM Return.290 IPM Breakaway.110 IPM Hydraulic System: Manufacturer& Type. Power& Pressure.7 1/2 HP. 5000 psi Fluid Capacity.55 gallons Electrical Characteristics.220 VAC/ 3 Phase/ 60 Cycle Equipped With: Electrical Controls. Dual Pushbutton Operation Pressure Gauge with Shut Off Valve Bolster Plate(30" F-B x 30" L-R x 2" Thick) Reinforced Welded Steel Frame Adjustable Stroke Control Approx. Overall Dimensions.58" L-R x 69" F-B x 127" H Weight.5.500 lbs. est. FOB.Casa Grande. AZ*Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa
Buy It Now
Condition: Used Location: Monclova, United States 53" STROKE. 60" X 48" TABLE. Estimated Weight: 28,000 lbs. T SLOTS RAM AND BOLSTER.
Buy It Now
Condition: Used Location: Detroit, United States More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website REC# 2661(1) Used 50 TON DAHLSTROM Model ... more50TP High Speed Cut Off Press; 4 Post Type; Air Clutch/Brake; S/N P769 Specifications: Capacity.50 tons(bottom stroke) Distance Between Posts.19" L-R x_ F-B Distance Between Guide Bushings. Stroke.2" Distance Bed to Floor.44 1/2" Speed.300 spm(est) Motor.10 HP Electrical Characteristics.230/460 VAC/ 3 Phase/ 60 Cycle Equipped With: Complete Electrical Controls Fawick Air Clutch/ Brake Overall Dimensions.75' L-R x 47' F-B x 61' High(est. Weight.4.000 lbs. est. F.O.B.Casa Grande. AZ*Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, straight-side, straightening& extrusion) press brakes, apron/finger/box& pan brakes, blast cleaners, air compressors, boring mills(both horizontal& vertical) chip conveyors, coil equipment(consisting of reels, straighteners, feeders, cradles& levelers)
Buy It Now
Condition: Used Location: Toledo, United States ROCKFORD OBI, BACK GEARED, SINGLE CRANK PRESS. SINGLE BACK GEARED. STROKE OF SLIDE. . 3". BOLSTER AREA. (LR X FB X THICK). 26" X 14" X 2-1/8". DIRECT ... moreV-BELT MOTOR DRIVEN.
Buy It Now
Condition: Used Location: Alto, United States Asset # 13137. Ram Speed Pressing 7 IPM. We are always looking to buy machinery ?. 1 piece or entire plants. End of Table Center Line Ram 11”. Table Height ... more24”. Table Width 30”. Motor 2 HP/1800 RPM.
Buy It Now
Condition: Used Location: Mansfield, United States STROKE (STANDARD). . 1-1/2". HYDRAULIC PUMP - 2 HP 230-460v 3/60 1735 RPM. MAIN MOTOR - 7.5 HP 230V 3/60 865 RPM. 1/2 HP 208/230/460V DRIVE 3 PH 60 CYC ... more1140 RPM. WITHDRAWAL TRAVEL. . 4".
Buy It Now
Condition: Used Location: Elkhart, United States Stroke - Ram Travel.. 0 - 12". Closed Height.. 6" ( Maximum Stroke). Speed - Pressing ( Estimated ).. 150 IPM. Integral Motor Driven Hydraulic Pump - ... moreOil Sight Gauge - Oil Reservoir - Pressure Gauge.
Buy It Now
Condition: Used Location: Toledo, United States 9" H x 2.75" Flange "Zee Purlin" Tooling: 12 Ga. - 16 Ga. 6.5" H x 2.5" Flange "Zee Purlin" Tooling Bradbury RS4-25-5 Powered Straightener. Bradbury 420-36 ... morePowered Uncoiler w/ Coil Car. Catalogue SpecificationsBradbury D3-30-12 Roll Forming Line Specifications.
Buy It Now
Condition: Used Location: Grand Rapids, United States Capacity: 440 US Tons (400 KN) at 0.25". Stroke: 12". Slide Area: 108.62" x 55". Bed Area: 108.26" x 55". All information is to the best of our. Speed: ... more25 to 60 SPM. Total Weight: 97 Tons. Overall Height: 257.87".
Buy It Now
Condition: Used Location: Mansfield, United States 75 TON GREENERD MODEL #H-75-42R17 HYDRAULIC PRESS. CAPACITY.. 75 TON. PRESSING.. 44 IPM. 4" DRAW.. PALM BUTTONS AND FOOT PEDAL.
Buy It Now
Condition: Used Location: Holland, United States 50-100 SPM. FOB: Monclova Ohio. 3.94" STROKE. PALM BUTTONS. VIBRATION MOUNTS. 60" LR X 60" FB X 94" T. 7.83 SHUT HEIGHT OVER BOLSTER. AIR COUNTERBALANCE.
Buy It Now
Condition: Used Location: Rockford, United States All machine sales are subject to machine availabilty. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only. ... moreStroke: 12". Bed Size: 96" x 64". Dallas D500 Air Feed w/ Pull Thru Straightener.
Buy It Now
Condition: Used Location: Bailey, United States Has two 12" bore cylinders with 48" stroke. Two saw-tooth safeties. 60 HP motor. Top-mounted hydraulics.
Buy It Now
Condition: Used Location: Toledo, United States (2) 650-Ton Clearing Die Cushions. Stroke: 9".
Buy It Now
Condition: Used Location: Toledo, United States 150-Ton Niagara Press, Model SC2-150-60-36 Model: SC2-150-60-36Capacity: 150 TonsMax Above Bottom of Stroke: ¼”Shut Height: 23-1/2”Slide Adjustment: 9”Stroke: ... more10”Bed Size/ Slide Area (L-R F-B): 60” x 36”Strokes Per Minute: 40Rated Air Pressure: 35 - 44 PSIT-Slotted Ram & Bolster
Buy It Now
Condition: Used Location: Elk Grove Village, United States All machine sales are subject to machine availabilty. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only. ... moreStroke: 8". Between Housings: 78". Overall Length: 96".
Buy It Now
Condition: Used Location: Milwaukee, United States (1)Pre Owned 115 Ton Gasparini PBS105-3000 CNC Hydraulic Press Brake. Tonnage Capacity: 115 US Tons. Stroke: 7.9". pedestal palm station / Electric Foot ... moreSwitch. Main Motor Horsepower 15 480/3/60. high speed servo hydraulic system.
Buy It Now
Condition: Used Location: Holland, United States 17.74″ SHUT HEIGHT. PALM BUTTONS. AIR COUNTER BALANCES. 27.25″ LR x 21.5″ FB RAM. 50″ LR x 31.5″ FB BED. REFERENCE NUMBER: 17077. SERIAL #: G1-160S-0005.
Buy It Now
Condition: Used Location: Monclova, United States 330 TON STAMTEC S2-300 STRAIGHT SIDE DOUBLE CRANK PRESS, 98.43" LR x 55.12" FB Bed, 10" Stroke, 30.12" SH, 30-60 SPM, 44" Windows. S2 SERIES 2-POINT STRAIGHT ... moreSIDE PRESS: The Stamtec S2 two-point straight side press (a.k.a. double crank press) is designed for stamping large parts or ones that require a large bed area to accommodate progressive or transfer dies.
Buy It Now
Condition: Used Location: Waukesha, United States STROKE (ADJ.).25" TO 11.8". DUAL PALM BUTTONS. TONNAGE. 110 TONS. PRESS.. 23 IPM. RAM SPEEDS: ADVANCE. 23.5" X 43.5". AGE.. 1977.
Buy It Now
Condition: Used Location: United States Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Rec# 2905(1) Used 75-Ton HPM 4-Post Hydraulic ... morePress; S/N 41-240 Specifications: Capacity.75 Ton Bed Area.48" L-R x 29" F-B Slide Area. Distance Between Posts.29" L-R x 29" F-B Stroke.9" Daylight.25" Distance Floor to Bed. Tie Rod Diameter. Number of Ram Cylinders. Type of Ram Cylinders. Diameter of Ram Cylinders. Ram(Slide) Speeds: Pressing. Advance. Return. Hydraulic System: Manufacturer& Type. Power& Pressure. Fluid Capacity. Line or Gauge Pressure.2.300 lbs. Electrical Characteristics. Equipped With: Complete Electrical Controls Complete Hydraulic System w/ Reservoir/ Tank Overall Dimensions.48" W x 103" L x 44" H. F.O.B.Casa Grande. AZ. Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engine
Buy It Now
Condition: Used Location: Toledo, United States Bolster Size: 108" x 84". Stroke: 24". Tonnage: 300.
Buy It Now
Condition: Used Location: Monclova, United States 300 Ton Minster SSDC Press Model E2 Heavy Stamper- Mint Condition Our Price: $235.000.00 Status: Used Excellent For more information: Call Brady McDonald ... moreat 860-484-4449. Or email bradym@globalmachinebrokers.com Item# 11478 This is a Brokered Item, Description SPECIFICATIONS: Tonnage: 300 Ton, Stroke: 8” Speed:Variable) 0-80 SPM, Slide adjustment: 6” Shut height… SDAU)32” Bed area: 48” x 84” Slide area: 48” x 84” Side window width: 24” Motor: 50 HP, Electrics: 220/440/3PH, Weight Approximate: 103.000 lbs. EQUIPPED WITH: Minster Air Clutch and Brake, Single Geared, Motorized ram adjustment, Dual air counter balances, Automatic recirculating lubrication system, 8” thick Bolster, Press console, T-Slotted Ram& Bed, Vibro Dynamic Press Mounts, Servo feed, Scrap cutter,
Buy It Now
Condition: Used Location: Alto, United States Asset # 12269. We are always looking to buy machinery 1 piece or entire plants. Top Platen 20” x 29 ½”. Motor 25 HP / 1765 RPM. T Slot Size on Table ¾”. ... moreTonnage 50 Tons. Center Distance of T Slots 12”.
Buy It Now
Condition: Used Location: Perrysburg, United States All machine sales are subject to machine availabilty. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only. ... moreStroke: 3". Air Clutch & Brake. Lateral Adj of Machine on Base: 4".
Buy It Now
Condition: Used Location: Thomaston, United States Stroke: 14". Slide Area: 120" L-R x 54" F-B. All machine sales are subject to machine availabilty. Bed Area: 120" L-R x 54" F-B. (3) Die Cushions (22J, ... more7" stroke). Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only.
Buy It Now
Condition: Used Location: Monroe, United States MODEL: 1548. Ram Stroke: 2". Capacity: 15 Tons. 3/4 HP Motor 230/460/60/3. 48" x 16 Ga. Length of Bed and Ram: 48". 30" x 12 Ga. SERIAL NUMBER: PB36-318.
Buy It Now
Condition: Used Location: Elkhart, United States Stroke - Ram Travel.. 0 - 7". Closed Height.. 6" ( Maximum Stroke). Integral Motor Driven Hydraulic Pump - Oil Sight Gauge - Oil Reservoir - Pressure ... moreGauge.
Buy It Now
Condition: Used Location: Holland, United States 22″ SHUT HEIGHT. T – SLOTTED RAM AND BOLSTER. MODEL #: 150 OBG. 50″ x 30″ BED. REFERENCE NUMBER: 19045D. 64″ LR x 102″ FB x 14′ TALL.
Buy It Now
Condition: Used Location: United States More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Rec# 1539-215(1) Used 2 Ton ADVANCED HYDRAULICS“C” ... moreFrame Press; S/N CPB.2.E.1215 Specifications: Capacity.2 Tons Bed Area.11 3/8" L-R x 8 7/8" F-B Bed Opening.2 7/8" L-R x 6" F-B Slide Area.1" Circle. Stroke.5" Nominal. Bore.1" Daylight Opening.9" Nominal. Distance Bed to Floor.5" Ram(Slide) Speeds: Pressing.90 i.p.m. nominal) Advance.210 i.p.m. nominal) Return.210 i.p.m. nominal) Hydraulic System: Power& Pressure.1.5 HP Fluid Capacity.7 gallons(nominal) Electrical Characteristics.440 VAC/ 3 Phase/ 60 Cycles Equipped With: Complete Electrical Controls. Dual Electric Palm Buttons. Dual Button Operator Controls. 1.5 HP Hydraulic System. Adjustable Limit Switches Overall Dimensions.20" L-R x 30" F-B x 28" High. Weight.250 lbs. est. F.O.B.Casa Grande. Arizona*Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest i
Buy It Now
Condition: Used Location: Elk Grove Village, United States Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only. All machine sales are subject to machine availabilty. ... moreCatalogue Specifications Capacity: 75 Ton. Stroke: 10".
Buy It Now
Condition: Used Location: Anthony, United States FMI Machinery. Table 27 x 18. 8261 South Desert Blvd. Capacity 90 Tons. Weight 6400 lbs. Hydraulic Type.
Buy It Now
Condition: Used Location: Elkhart, United States One(1) Used Dahlstrom Model 30TP Cut Off Press. the Machinery Dealers National Association (MDNA). We have over 35,000 Sq Feet of Warehouse Space. Witchita ... moreAir Clutch & Brake. Date of Manufacture: 1980 Estimated.
Buy It Now
Condition: Used Location: United States More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Record# 1756(1) Used 100 Ton LOEWY Extrusion ... moreStretcher with Detwist Headstock Specifications: Capacity.120 Tons@ 6.000 P.S.I. Workpiece Length.110' Maximum) Rail Gage.45" Wheel Base.42" C-C. Dia. of Detwister Head.39" Jaw Opening.11" Max) 3" Min) Jaw Width.12" Jaw Mounting.6" Dovetail. Electrical Characteristics.240/480 VAC/ 3 Phase/ 60 Cycle Equipped With: 25 HP Oilgear Hydraulic System with Controls. Detwister Drive: 3 HP Reliance Gear Reduction with Controls Overall Dimensions.125' Long x 5' Wide x 6' High. Weight.48.000 lbs. est. F.O.B.Casa Grande. AZ*Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, str
Buy It Now
Condition: Used Location: Holland, United States 8″ SHUT HEIGHT. 96″ x 24″ BED. AIR CLUTCH & BRAKE. MOTOR: 10 HP 220/440/60/3. 9500 LBS APPROXIMATE WEIGHT. GOOD CONDITION.
Buy It Now
Condition: Used Location: Compton, United States Tension Cylinder Stroke. RAAR Group USA. Overall Floor Space Required. 23' 6" x 14'11" F-B. Table Height. Model: A-10. Serial No: 24. 219" Standard Arm.
Buy It Now
Condition: Used Location: Monclova, United States FOB loaded on truck, Monclova, OH. Stroke 12". Slide 30" x 72", T-slotted. Press may be inspected in warehouse storage in Monclova, OH.
Buy It Now
Condition: Used Location: Holland, United States Hydraulic Ejector Pressure: 2.2 Tons. Ejector Stroke: 2". Capacity: 176 Tons. All machine sales are subject to machine availabilty. Hydraulic Draw Cushion ... morePressure: 17.6 Tons. Draw Cushion Stroke: 3.9".
Buy It Now
Condition: Used Location: Grand Rapids, United States Jog advance 174 IPM. Machine is equipped with factory stand, dual ergonomic palm buttons, adjustable tonnage. Allen Bradleyu SLC 500 PLC, Vickers hydraulics, ... moreelectrical & hydraulic schematics, ladder logic diagrams.
Buy It Now
Condition: Used Location: Alto, United States Asset #16313. Coe 36″ x 3/16″ x 20,000-Lb Coil Servo Feed Line. Coe CPCC-20036 Coil Cradle. AC Servo Drive Digital Rollfeed Model No. AC brushless servo ... moredrive. Feed Angle: 180-240 Degrees. Feed Specifications.
Buy It Now
Condition: New Location: Lithia, United States Bending Length: 144". Capacity: 220 TONS. Stroke: 10.6". Located in the Tampa Florida suburb of Lithia, Southern Fabricating Machinery Sales is a full ... moreservice machinery dealer. Back Gage: X/R w/ 40" X-Axis Stroke.
Buy It Now
Condition: Used Location: Elkhart, United States For immediate response to questions please contact a sales rep at 800-745-6008. Otherwise your questions will be answered as soon as possible. Our stock ... morenumber: 23169 DENISON GAP FRAME HYDRAULIC PRESS MODEL: A SERIAL NUMBER: 3713 GENERAL SPECIFICATIONS Bench Model On Stand Capacity: 2 Ton EQUIPPED WITH 1/2 HP Motor. 220/440/60/3 Touch Probe Finger Operation F.O.B. Cincinnati. Ohio 45223*PLEASE READ BELOW BEFORE BIDDING OR BUYING ITEM* All items are sold SPECIFICATIONS SUBJECT TO VERIFICATION All items are offered locally and could be sold previous to end of store listing. Contact Information C.W. Wood Machinery Inc. 3290 Beekman Street. Cincinnati. Ohio 45223. 513-542-8400. 800-745-6008. Payment Information We accept Visa. Master Card, Discover, PayPal, Bank Wire Transfers and Checks. We accept PayPal. But prefer other forms of payment. Shipping Information Domestic: We ship freight collect or small items prepaid UPS Ground. Buyer may pick up or set up shipping. Echo Global Logistics: Evan Sack 245-528-7157. ICCI: Tyler Rose 1-888-773-6785. Freight Quote: Drew Taylor 1-800-323-5441 ext. 1308. All quotes will be for regular business delivery unless otherwise specified. All small items are shipped prepaid UPS Ground or on buyers account. All quotes will be for regular business delivery unless otherwise specified. Please be aware that other fees may be applied if buyer does not specify any special deliver needs. International: We do not give freight quotes for international shipping. Buyer is responsible to set up international shipping. Additional Fees All items are shipped at the customer’s expense including and not limited to freight. Handling, packaging, palletizing and skidding fees. Skidding fees range from a minimum of $50.00 +. skids shown in pictures are not included with the item. Any item purchased with a pick up or delivery date more than 10 days from date of sale may be subject to a storage fee. please discuss with seller before purchase. Return Policy We accept returns within 30 days from the sh
Buy It Now
Condition: Used Location: Puyallup, United States Specifications: ---Make: Sutherland ---Model: Mark 66 ---Year: 1998 ---Type: Auto Gap Frame Press Capacity: ---Stroke: 3.14" ---Powered Ram Adjustment: ... more2.7" ---Stoke Per Minute: 55-110 ---Ram Size: 18.9" x 15.7" ---Tonnage: 66 Ton Equipped With: ---Air Clutch ---Light Curtain.
Buy It Now
Condition: Used Location: Mansfield, United States CAPACITY. . 100 TON. HYDRAULIC PUMP UNIT: 43" L x 24" W x 44" H. MOTOR: 20 HP, 575V, 3PH, 60CYC, 1770 RPM. TABLE HAS SINGLE ROLLS ON EACH END. EQUIPPED ... moreWITH: 6 FOOT LONG TABLE MOUNTED ON BED.
Buy It Now
Condition: Used Location: Alto, United States Asset #16314. Coe 36″ x 3/16″ x 20,000-Lb Coil Servo Feed Line. Coe CPCC-20036 Coil Cradle|. AC brushless servo drive. Feed Angle: 180-240 Degrees. Feed ... moreSpecifications Regulators for feed roll raise & lower.
Buy It Now
Condition: Used Location: Monclova, United States 3.94" STROKE. PALM BUTTONS. 35.5" X 17.7" X 4.3" BED. AIR CLUTCH. 48" X 55" X 94" T. AIR COUNTERBALANCE. 9.84" SHUT HEIGHT OVER BOLSTER.
Buy It Now
Condition: Used Location: Moline, United States All machine sales are subject to machine availabilty. Stroke: 6". Unless specifically stated in writing by PMS, all freight carriers must use flat bed ... moretruck only. Flush Floor Design. Distance, Bed to Floor: 32".
Buy It Now
Condition: Used Location: Elk Grove Village, United States All machine sales are subject to machine availabilty. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only. ... moreStroke: 7.9". Stroke Speeds: 30 - 80 SPM. Shut Height (Bed to Slide, SDAU): 38.6".
Buy It Now
Condition: Used Location: Springfield, United States FOB loaded on truck, Springfield, OH. Stroke 11". Slide 27 1/2" x 82 1/2", T-slotted. Press may be inspected in warehouse storage in Springfield, OH. ... moreShut height 21.6" over bolster plate.
Buy It Now
Condition: Used Location: Elk Grove Village, United States Throat Depth: 11.6". WE'RE ALWAYS LOOKING TO BUY USED MACHINERY! Stroke: 4.7". Stroke Position Indicator. Capacity: 66 Tons. Opening Through Back: 24". ... moreAC Main Drive Motor. Speed: 70 SPM.
Buy It Now
Condition: Used Location: Mequon, United States 50 ton P & H Hydraulic Press OGF-50. 15" STROKE. PALM BUTTONS. 30" X 27" BED. Condition is "Used". 15 HP MOTOR. 100 GALLON RESERVOIR.
Buy It Now
Condition: Used Location: Elk Grove Village, United States EIMCO SHRIVER M1200FB 40.5 CU.FT. FILTER PRESS B44847. Max Thrust: 115 Ton. Holding Capacity: 40.5 cu. Cake Density (Approx): 80 lbs / cu. All machine ... moresales are subject to machine availabilty. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only.
Buy It Now
Condition: Used Location: Monclova, United States BLISS MODEL C75 OBI PRESS 75 TON 4" STROKE. AIR CLUTCH, LIGHT CURTAINS, PEDESTAL PLEASE CALL JIM FOR MORE INFO 7146121480
Buy It Now
Condition: Used Location: United States More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Record# 2337(1) Used 40 Ton WEAN-UNITED ... moreExtrusion Stretcher Specifications: Capacity: Tension(stretching) Load.40 tons@ 2.000 psi(nominal) Tension(stretching) Distance.60 in. nominal) Return(pushing) Load. Workpiece Length.1 42 ft. max)nominal) Workpiece Diameter or Cross Section.6 1/2 in. max) Pass Line Height.34 1/2 in. Headstock Type.Hydraulic/ Non-Rotating Tension Cylinder Diameter.7 in. nominal) Tension Cylinder Rod Diameter.3 5/8 in. Track Length(total)58 ft. Track Sections(3)1@ 24 ft. 1@ 20 ft 1@ 14 ft. each) Track to Pass Line Height.9 in Track Height(from floor)25 in. Track Width(across top)20 1/8 in. Track Type.Fabricated Steel with Hardened Steel Rails(replaceable) Tailstock Guide System.Flanged Guide Wheels(4) Tailstock Locking System.Over-Riding Drop-Hook. Tailstock positioning increments.24 in(nominal) Tailstock Positioning System.Manual Jaw Width.5 in. Jaw Opening.6 in. max) Jaw Type.Tapered Wedge Jaw Actuation.Pneumatic Equipped With: Complete Electrical Controls with Operator's Control Station Complete Hydraulic System Overall Dim
|