|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Grand Rapids, United States 800 Ton Verson Straight Side Press. Stroke: 16". Bed Area: 108" x 60". All information is to the best of our. Capacity: 800 Tons.
Buy It Now
Condition: Used Location: Lincolnshire, United States Plumbed for Speedfam Slurry Tank and Pump Distributor with Manual and. Drive System: The machining plates and work carrier drives are variable speed. ... moreWork Carrier Motor. - Speed - Lower Plate.
Buy It Now
Condition: Used Location: Cranston, United States Stroke length 2.5”. Shut Height on Bed SDAU 13.5”. Bolster L.R.- F.B. 36" x 25”. Tonnage 45. Press Includes Vibro Dynamics Vibration Leveling Press Mounts. ... more-Press can be seen and inspected under power.
Buy It Now
Condition: Used Location: Salt Lake City, United States STROKE OF SLIDE. AREA OF BED & RAM. 72" X 36". BED BOLSTER SIZE. 72" X 36" X 6.5" THICK.96” Lx176”Hx63”W. MOTOR, HORSEPOWER. 25. AIR CLUTCH. . Total Weight. ... more.
Buy It Now
Condition: Used Location: Cranston, United States 5670- Rouselle Gap Frame Straight Side Double Crank Press Manufacturer: Rouselle Model: 6B-76 S/N: FBSA6138 Year: Specifications: Tonnage 60 Ram Stroke ... more2" Ram Adjustment 3" Shut Height 12 1/2" Bed Size(L-R. F-B) 76" x 18" Ram Size(L-R. F-B) 64" x 16" Throat Depth 10" Strokes Per Minute 110 Dimensions(L x W x H) 105" x 45" x 110" Weight 10.500 Lbs. Equipped With: Air Clutch& Brake Airl Counter Balance Dual Palm Control One Shot Lube System Horsepower: 5 Location: Huntington Park. CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment of all amounts due under this Agreement. 2. Taxes: Prices do not include any federal. State, or local taxes, which are in addition to the purchase pr
Buy It Now
Condition: Used Location: Watertown, United States Minster Piecemaker P2-60 Straight Side Precision Stamping Press with 2" Stroke - Mint Condition! Later model Piecemaker press. Eddy Current Motor. Pneumatic ... moreCounter Balance. Unisorb Anti Vibration Leveling Feet.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. CAPACITY. 200 TON. BED. 36" X 42". PALM BUTTONS. MODEL. S1-200-36-42. SPEED. 24 SPM.
Buy It Now
Condition: Used Location: Guilford, United States Minster Piecemaker P2-60 Straight Side Precision Stamping Press with 2" Stroke - Mint Condition! Later model Piecemaker press. model: Minster P2-60 PIECE ... moreMAKER. Eddy Current Motor. Pneumatic Counter Balance.
Buy It Now
Condition: Used Location: Lancaster, United States Machine Model No.: SC1700. Rated Air Flow Capacity: 700 to 1800 CFM. New Date: 2001. Dust Drawer Storage: 1.8 Cubic Foot. External Static Pressure: 7.2 ... moreto 4.8. Below explains what to do once you are on that page.
Buy It Now
Condition: Used Location: Toledo, United States CAPACITY. 200 TON. STROKE OF SLIDE. AREA OF BED & RAM. 72" X 36". BED BOLSTER SIZE. 72" X 36" X 6" THICK. MOTOR, HORSEPOWER. 20. CUSHION POCKET SIZE.
Buy It Now
Condition: Used Location: Watertown, United States Make: Minster. Ross Minster Dual Solenoid Safety Pneumatic Valve. Shut Height To Bolster: 7 To 10". Machine In Great Overall Condition. Freight may be ... morebooked with any carrier, but usually goes out on the best available.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. CAPACITY. . 100 TON. STROKE. . 6". AIR COUNTER BALANCE. PALM BUTTONS. . YES. BED SIZE. . 48" X 24".
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. DOUBLE CRANK. . STROKE OF SLIDE. 6". STROKE PER MINUTE. . AREA OF BED AND RAM T SLOTTED. 48" X 24". CAPACITY. . 65 TONS.
Buy It Now
Condition: Used Location: Milwaukee, United States Pre Owned HTC 150 Ton Model 150-MS Straight Side Press. Bed Area (Nominal): 158" L-R x 49" F-B. Slide Area: 158" L-R x 49" F-B. Stroke 0 - 7". Pressing ... moreto 150 Tons. Flush Floor Press. Dual Palm Buttons.
Buy It Now
Condition: Used Location: Milwaukee, United States General Specifications Capacity Forming 150 Tons Punching 100 Tons Stroke 0- 7" Shut Height 14" Maximum Bed Area(Nominal) 158" L-R x 49" ... moreF-B Slide Area: 158" L-R x 49" F-B Distance Between Housings: 125" L-R Distance Between Gibs: 113" L-R Windows: 20" L-R x 27" High Floor to Bed: 37" Speeds Approx. 56"Min. closing 21"Min. Pressing to 150 Tons 110"Min. Return Main Motor 15 HP Equipped With Flush Floor Press Pushbutton Operation w/Stroke& Pressure Control Dual Palm Buttons Electric Foot Switch Pressure Gauge Trabon Automatic Lubrication System Heat Exchanger Approximate Overall Dimensions 156"L X 88" F-B X 134"H Approximate Overall Weight 45000 LBS Any questions? 414-264-5848 More pictures at alecomachinery.com Loading included.
Buy It Now
Condition: Used Location: Grand Rapids, United States 1,000 Verson Straight Side Press. Stroke: 37". Bed Area: 180" x 96". All information is to the best of our. Side Moving Bolster. Two Available. 3 Cushions. ... moreSlide Area: 180" x 96".
Buy It Now
Condition: Used Location: Cranston, United States Stroke length 2”. Press is in good condition. Bolster L.R.- F.B. 20" x 20”. Tonnage 50.
Buy It Now
Condition: Used Location: Toledo, United States 500 Ton Verson Straight Side Single Crank Press. Stroke 10". Slide 36" x 36. Bed 36" x 46". Shut height 37" to bed.
Buy It Now
Condition: Used Location: Watertown, United States Make: Minster. 2.5" Stroke. Press In Excellent Condition. Freight may be booked with any carrier, but usually goes out on the best available. SOLD AS ... moreIS/WHERE IS. No handling fees apply on local pickup.
Buy It Now
Condition: Used Location: Toledo, United States CAPACITY. 125 TON. BED. . 48" X 30". CLUTCH & BRAKE. AIR. SHUT HEIGHT.
Buy It Now
Condition: Used Location: Southington, United States Tonnage. .. 100 Ton. Length of Stroke. . 5". Stroke per Minute. .. 75 - 150.
Buy It Now
Condition: Used Location: Casa Grande, United States Stroke..18". Hydraulic System We also specialize in all types of saws – extended height vertical band/plate saws, horizontal band type, power hack, and ... moremany types of custom table/feed sawing systems.
Buy It Now
Condition: Used Location: Los Angeles, United States ASK SALESPERSON ABOUT MACHINE AND WARRANTY . Our vast warehouses contains over 1,500 pieces of New and Used machines available for inspection in person, ... moreor live via internet webcam fed directly to your computer's browser.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States Johnson South Bend OBI Presses, Service Manual Year (1966). Power Presses Service manual. I’ve read Parts of these Programming and Operations Manuals. ... moreThere are So Many Possibilities. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States Niagara Instructions, Parts and Installation Manuals. Form T-6-D: Model 206X Niagara Rotary Cam Limit Switch. Form T-13: Niagara Load Analyzer Model 227 ... moreOperation Procedure. I’ve read Parts of these Programming and Operations Manuals.
Buy It Now
Condition: New – Open box Location: Haw River, United States ITEM 2312: 816.2 SQ. L039L M-20. MANUFACTURER: APV / SPX TECHNOLOGY – APV HEAT TRANSFER. 816.2 SQUARE FEET OF HEAT TRANSFER. DRY WEIGHT: 2290 LBS. WIDTH: ... more23-15/16”. BASE LENGTH: 71-9/16”. HEIGHT: 64”.
Buy It Now
Condition: Used Location: Toledo, United States The Model 250 Straight-O-Matic system consists of basic machine with adjustable tooling stations that will accommodate a variety of parts. The side plates ... moreof the machine are actuated by rotary cams, which transmit alternate reciprocal strokes to the tooling stations.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. PALM BUTTONS. . AREA OF BED. . AIR CLUTCH. . YES. AIR BRAKE. YES. AIR COUNTERBALANCES. . YES.
Buy It Now
Condition: Used Location: Grand Rapids, United States 300 Ton Minster Straight Side Press. Stroke: 8". Bed Area: 54" x 42". Capacity: 300 Tons. All information is to the best of our.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. I’ve read Parts of these Programming and Operations Manuals. ... moreThere are So Many Possibilities. This Manual Has 22 Printed Pages.
Buy It Now
$14.00 Shipping Condition: New – Open box Location: Muskego, United States PDJNL 16 3DHP. Orthogonal rake angle(GAMO) -6 deg. Shank width(B) 25.4 mm. Shank height(H) 25.4 mm. Weight of item(WT) 0.725 kg. Tool cutting edge angle(KAPR) ... more93 deg. Coolant pressure(CP) 275 bar. Workpiece side body angle(BAWS) 0 deg.
Buy It Now
Condition: New – Open box Location: Haw River, United States ITEM 2315: 117.4 SQ. LR4 M-16; UNUSED. MANUFACTURER: SPX TECHNOLOGY – APV HEAT TRANSFER. PRICE, FOB HAW RIVER, NC……………. 117.4 SQUARE FEET OF HEAT TRANSFER. ... moreDRY WEIGHT: 1237 LBS. PLATES MATERIAL OF CONSTRUCTION, WATER SIDE: 316 L STAINLESS STEEL.
Buy It Now
Condition: New – Open box Location: Haw River, United States ITEM 2314: 346.6 SQ. N35-M-21; UNUSED. MANUFACTURER: APV / SPX TECHNOLOGY – APV HEAT TRANSFER. PIPE CONNECTIONS: 3” X 150 #, SCHEDULE 40; ALL 4 NOZZLES; ... more254 SMO STAINLESS STEEL LOW CARBON (ONE SIDE); 316L STAINLESS STEEL (OTHER SIDE).
Buy It Now
Condition: Used Location: Guilford, United States Model: WMW ERFURT 100 Ton (1970). • 6” Stroke – can make 2.5” tall parts • 100 Tons – straight side press with double crank • Includes built in blanking ... morestation in very first operation. Ram slide ways look excellent.
Buy It Now
Condition: New – Open box Location: Haw River, United States ITEM 2317: 173.3 SQ. N35-M-21; UNUSED. MANUFACTURER: SPX TECHNOLOGY – APV HEAT TRANSFER. 173.3 SQUARE FEET OF HEAT TRANSFER. PLATE ID N35S. DRY WEIGHT: ... more1620 LBS. PLATES MATERIAL OF CONSTRUCTION, WATER SIDE: 316 L STAINLESS STEEL.
Buy It Now
Condition: Used Location: United States More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website REC# 3233. 1) Used Hofler Model HFR 2000/ ... more2400 Gear Checking Machine with Siemens Control F.O.B.Casa Grande. Arizona. Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, straight-side, straightening& extrusion) press brakes, apron/finger/box& pan brakes, blast cleaners, air compressors, boring mills(both horizontal& vertical) chip conveyors, coil equipment(consisting of reels, straighteners, feeders, cradles& levelers) CMM's, parts washers, radial arm drills, drill presses, dust collectors, generators, transformers, grinders(tool& cutter, universal, surface, drill) lathes(vertical, horizontal, wheel) ovens, furnaces, process equipment, hydraulic pumps, turret punches, ironworkers, plate rolls, power hack saws, bandsaws, shapers, planers, shears, threaders, vibratory finishers, welders, welding prepositioners, as well as forklifts, cranes, and material handling equipment. We also specialize in all types of saws– extended height vertical band/plate saws, horizontal band type, power hack, and many types of custom table/feed sawing systems. Centrally located in Casa Grande, AZ, we can demonstrate many machines under power at our 100.000 sq/ft warehouses. Most machines have been reconditioned and are ready for shipment, in
Buy It Now
Condition: Used Location: Los Angeles, United States Capacity100 Ton x 5". Shank Hole1.9". Our vast warehouses contains over 1,500 pieces of New and Used machines available for inspection in person, or live ... morevia internet webcam fed directly to your computer's browser.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States Pacific Press Brakes 100-300, ‘46 Direct Acting Straight Side, Operations Maintenance and Wiring Manual 1952-1956. I’ve read Parts of these Programming ... moreand Operations Manuals. There are So Many Possibilities.
Buy It Now
Condition: Used Location: Toledo, United States TONNAGE.: 250 TON. STROKE..: 12". BED SIZE..: 84" L-R X 36" F-B. RAM SIZE..: 84" L-R X 36" F-B. STROKES PER MINUTE.: 25.
Buy It Now
Condition: Used Location: Toledo, United States STROKE.: 6". BED SIZE.. : 84" L-R X 48" F-B. PALM BUTTONS.: YES. RAM SIZE.. TONNAGE..: 150. AIR COUNTERBALANCES.
Buy It Now
Condition: New – Open box Location: Fountain Valley, United States Maxon CSTM 1.5 X 2 Duct Burner Gas Train EDS Plus. (New) 2013 Maxon Mod. They are also used to recover valuable heat energy from industrial furnaces, ... morekilns, ovens and dryers of all types. From food spray dryers to sand and mineral dryers.
Buy It Now
Condition: Used Location: Toledo, United States BED SIZE.: 96" L-R X 48" F-B. TONNAGE..: 400. FAST PRESS.. NORMAL PRESS..: 29 IPM. CUSIONS..: (3) 50 HP MOTOR.
Buy It Now
Condition: Used Location: Toledo, United States TONNAGE..: 400 TON. STROKE..: 28". WORK STROKE..: 4". BED SIZE..: 48" X 42". AIR COUNTER BALANCE TANK.
Buy It Now
Condition: Used Location: Dallas, United States MAKE: USI CLEARING. STROKE. 32". 20 STROKE PER MINUTE. Turners Machinery Inc. of Retrofit to CNC Inc. 120" X 72" BED AREA. We try to provide good pictures ... morefor your consideration. SPECIFICATION SHOWN ARE TO BE USED AS A GUIDELINE ONLY.
Buy It Now
Condition: Used Location: Horicon, United States All machine sales are subject to machine availabilty. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only. ... moreStroke: 12". Bed: 96" x 54". Catalogue Specifications Capacity: 300 Ton.
Buy It Now
Condition: Used Location: Toledo, United States Bed Size: 108” x 64”. Stroke: 18”. Cushion Stroke: 9”. Manufacturer: British Clearing.
Buy It Now
Condition: Used Location: Dallas, United States 350 TON CAPACITY. 61 TON CUSHION. 28" STROKE. Turners Machinery A Div. of Retrofit to CNC Inc. 14" CUSHION STROKE. We try to provide good pictures for ... moreyour consideration. 92" X 129" BED AREA.
Buy It Now
Condition: Used Location: Delta, United States Press may be inspected in warehouse storage in Delta, OH. FOB Loaded on truck, Delta, OH. Slide 21" x 97".
Buy It Now
Condition: Used Location: Grand Rapids, United States 500 Ton Danly Straight Side Press. Stroke: 18". Capacity: 500 Tons. All information is to the best of our. Double Crank. Two Available. Air Clutch.
Buy It Now
Condition: Used Location: Elk Grove Village, United States RI-48/24 Infeed Conveyor with Belting, 24' Long x 48" W Conveyor System with 3 HP Direct Gear Reduction Drive. Hydraulic Aggregate System. 150 hp Direct ... moreDrive Motor with VFD Inverter Drive. (2) Rotary "W" Cutters with Inserts and Bed Knives.
Buy It Now
Condition: Used Location: Milwaukee, United States Pre Owned South Bend Model S2-200-72 X 48 BGAC150 Ton Straight Side Double Crank Press. Palm Buttons. Bed Area 72” X 44”. Closed Height 22” SDAU - Above ... moreBed Windows 18” X 34”. Ram Area 72” X 48”. Capacity 200 TONS.
Buy It Now
Condition: Used Location: Grand Rapids, United States 500 Ton Verson Link-Motion Straight Side Press. Stroke: 24". Link Motion Press. Bed Area: 108" x 72". Shut Height: 76" SDAU to Bed (52" to Bolster). All ... moreinformation is to the best of our. Capacity: 500 Tons.
Buy It Now
Condition: Used Location: Elk Grove Village, United States Catalogue Specifications Capacity: 450 Ton. All machine sales are subject to machine availabilty. Unless specifically stated in writing by PMS, all freight ... morecarriers must use flat bed truck only. Stroke: 30".
Buy It Now
Condition: Used Location: Grand Rapids, United States Bliss High Speed Press Model HP2-75-60-30 Capacity 75 Tons Stroke 3" Adjustment 3" Bed Area 60" x 30" Shut Height 24" to bed ... moreSpeed 60 to 180 SPM Equipped with: Air Clutch and Brake. Wintress Die Protection and Analyzer, New bolster plate and sub plate, cleaned and painted sold in as is condition. FOB Delton Michigan 49046, machines are being marketed outside of Ebay and subject to prior sale, any Crating/Palletizing will be additional cost to the buyer Posted with
Buy It Now
Condition: Used Location: Rockford, United States All machine sales are subject to machine availabilty. Unless specifically stated in writing by PMS, all freight carriers must use flat bed truck only. ... moreStroke: 12". Bed Size: 96" x 64". Dallas D500 Air Feed w/ Pull Thru Straightener.
Buy It Now
Condition: Used Location: Mansfield, United States STROKE OF SLIDE. . 8". BED AREA (L-R) x (F-B). . DUAL PALMS. TWIN END DRIVE - GEARS IN OIL. SINGLE BACK GEARED. EQUIPPED WITH: AIR CLUTCH TYPE. AIR COUNTERBALANCE.
Buy It Now
Condition: Used Location: United States More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Record#3389(1) Used 36" TANNEWITZ ... moreModel G3SE Vertical Band Saw; S/N 14715 Specifications: Throat Capacity.35" Wheel Diameter.36" Under Guide Capacity.12" Base Construction.Cast Iron Motor Drive.Direct Blade Width Capacity.2" Blade Speed. Blade Length. Table Tilt.45 Degrees Table Size.37" L-R x 36" F-B Auxiliary Table.16 1/4" x 19 1/2" Upper Wheel Adjustment.6" nominal) Wheel Type.Heavy Duty Balanced Steel Disc Guide Post Adjustment.Manual Blade Tension Control.Manual Table Height.40 1/2" Motor Horsepower(TEFC)5 HP Electrical Characteristics.3 Phase/ 60 Cycle Equipped With: Overall Dimensions.72" L-R x 40" F-B x 94" High(est. Weight.3.500 lbs. est. F.O.B.Casa Grande. AZ*Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, straight-side, straightening& extrusion) press brakes, apron/finger/box& pan
Buy It Now
Condition: Used Location: Grand Rapids, United States Stroke: 12". Capacity: 330 Tons. Bed Area: 120" LR x 60" FB. Shut Height: 30" (over bed). All information is to the best of our. Total Weight: 117,500 ... morelbs (approx.). Slide Area: 120" LR x 60" FB.
Buy It Now
Condition: Used Location: Milwaukee, United States Stroke 1 1/2". Flush Floor Design. Bed Area 48” X 24”. Bed Height 37". Tie Rod Press. Main Motor Horsepower 10HP 220/440. Windows 18” X 9”. Air Clutch ... more& Brake.
|
|
|
|
Press Straight Side Double Crank 150 ton Niagara Model PN-150-72-48 (1973)
150 ton Niagara Model PN-150-72-48 Straight Side Double Crank Press Specifications Max Tonnage: 150 Ton, Stroke: 5" Shut Height Over Bed: 17" Slide Adjustment: 5" Bed Area: 72" x 48" Side Windows: 20" x 8" Bolster: 72 x 48 x 6-1/2, Air Pressure Required: Min.Max. 35/60 PSI, Main Motor Drive: 15 HP AC 3/60/230-460, Equipped With: Air Clutch& Air Brake Shadow II Electronic Eye Die Space Pinch Point Safety Controls Side Windows Automatic Lubrication System Full Size 6-1/2 Thick Tee Slotted Bolster Flush Floor Mount Pneumatic Cushion(2-1/2 Stroke) Surge Tank Dual Ram Air Counterbalance All Steel Welded Frame Design Dual Oil Bathed Gear Drive, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 ... moreor email at: scottt@assetexchangeinc.com
|
|
|
Verson 100 Ton Straight Side Press 100-B2-72 Punch Press / Stamping Press
Verson 100 Ton Straight Side Press 100-B2-72 Punch Press/ Stamping Press USED.THE PRESS IN NICE CONDITION. THE PRESS WAS IN WORKING CONDITION WHEN REMOVED FROM SERVICE. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-921-8848. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 100-B2-72 SERIAL# 24031 CAPACITY: 100 TONS STROKE- INCHES: 4 STROKES PER MINUTE: 70 SHUT HEIGHT- INCHES: 5 1/2" BED TO SLIDE STR. DN ADJ UP) RAM ADJUSTMENT- INCHES: 5" RAM SIZE- INCHES: LR 72" X FB 36" 15 HP ELECTRIC MOTOR VOLTS: 208-220/460 RPM: 1760 THE PRESS WEIGHS APPROX 26000 LBS OVERALL DIMENSIONS: WIDTH: 109 1/4" LENGTH: 65" HEIGHT: 134" OTHER DETAILS: THIS ITEM IS LOCATED AT OUR FLEETWOOD(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP ... moreAT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDI
|
|
|
Verson 75 Ton Straight Side Press 4B448 Stamping Press / Punch Press
VERSON 75 Ton Straight Side Press Stamping Press/ Punch press USED. IN NICE CONDITION. THE PRESS WAS IN WORKING WHEN REMOVED FROM SERVICE. Comes with Link Lite Safety Curtain. Palm Controls. CHECK THE PICTURES FOR SPECS ON THE PRESS. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-921-8848. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 4B448 SERIAL# 7680 10 HP ELECTRIC MOTOR 230-440 VOLT PRESS WEIGHS APPROX: 21500 LBS OVERALL DIMENSIONS: WIDTH: 85" LENGTH: 72" HEIGHT: 154" OTHER DETAILS: THIS ITEM IS LOCATED AT OUR FLEETWOOD(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF ... moreTHE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT
|
|
|
AIDA 330 TON STRAIGHT SIDE PRESS. - 2006 - EXCLNT - ONLY 1 LEFT
Aida2 Point Crank– Straight Side– Presses Model: NS2-3000W(2) Hy Flex New: 2006 BasicSpecifications(subject to buyer verification) Capacity: 330 US Tons 3000kn Stroke: 19.7” 500mm SPM: 10~30/min Die Height: 29.5” 750mm Slide Adj. 4.7” 120mm Slide Area: 82.6” x 55.1” 2100mm x 1400mm Bolster Area: 94” x 55.1” 2400mmx 1400mm Bolster Thickness: 7.8” 200mm Main Motor: 42 hp 30 kw Air Pressure: 0.5 mpa Upper Die weight: 5500 lbs. 2500 kg Useable Window: 60” x 29” 1525mm x 735mm Weight: Approx. 48Tons EquippedWith: AidaControls/Monitors– Pedestal Mounted Air Counter Balance Link Light“Black Max” Light Curtains(Front and Back) Full Length Slide Guides Forced Recirculating Lubrication New price is over $700.000 US with 1 year to deliver We have only(1) machine remaining for sale. All loading and shipping is buyers responsibility. Tooling shown in ... morephotos is not included in offer. Payment should be wire transfer or company check. Machine will not be released until funds have cleared. No Paypal unless you pay fees. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
300 Ton Bliss Straight Side Double Crank Press
Item#2553- 300 Ton Bliss Straight Side Double Crank Press Equipped With: 40 HP motor& controls 30" x.150" Littell R&P Roll Feed Serial#88649-86 6 1/2" dia. Feed rolls Anti-back up and power run-in rolls Machine Specifications: 300 Ton Bliss Straight Side Double Crank Press Model#S2-300-60-48 Tie rod frame Stroke 10" Strokes per minute 30-60. Variable Bed 48" x 60" Slide 48" x 60 Shut height 38" to bed Slide adjustment 10" Motorized Bolster plate 7" thick Bolster plate on ram. 34" x 45" x 7 1/2" thick Minster air clutch& brake Air counterbalances Window in uprights 31" wide Floor standing Shipping Point: MI Price: $89.500.00*SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655
|
|
|
Heidelberg Speedmaster HD102SP Straight 6Color 28x40 1984 Complete Running press
You are bidding on a used Heidelberg HD102SP Straight 6 Color printing press in Pristine Condition! This is a TURN-KEY press and can be demonstrated.it is located in Massachusetts. Call Larry Razza for further information 401-965-5557. Heidelberg Speedmaster 6 Color 1984 Type HD 102 SP Ser# 552-876 size 28-3/8" x 40" 72 x 102 cm) 220V 3 phase 50/60 Hz Infered Drying system Perforating. Cat#PA 00006-072913. Bid with Confidence on this item. Check our feedback! All information deemed accurate but may vary from model to model. Call Larry for any questions you may have. Call 401-965-5557 or Email: Larryrazza@hotmail.com_ Equipment Financing Available Through These Fine Leasing Companies: Online leasing applications(get monthly payments) FIRST LEASE https:id51.securedata.net/firstleaseonline/creditapp/Direct_Credit_App.html DIRECT CAPITAL ... moreLEASING http:ebay.directcapital.com* Please Note: Not all machines may qualify for Leasing. Payments: We accept company checks and Major Credit Cards. SHIPPING: Contact us for great rates on shipping. We always get better rates. Please email us for a rigging and shipping quote(just include the zip code when inquiring and if you have a loading dock or if you are a residential delivery. Thanks) Email: Larryrazza@hotmail.com or call 401-965-5557. We also ship worldwide. CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal. Change and prior sale without notice. Shipping dates are only approximate and contingent upon delays beyond our control. All orders received are binding only when they have been accepted and acknowledged by us in writing. Provisions in customer's purchase orders contrary to these conditions shall not be binding upon us unless accepted in writing. Unless otherwise specified, prices quoted are F.O.B. shipping point, exclusive of State, County and Federal taxes which must be added where applicable. Care is taken to give reliable specifications, but these are not guarant
|
|
|
150 Ton Bliss Straight Side Double Crank Press
Item#2634- 150 Ton Bliss Straight Side Double Crank Press Equipped With: Air Clutch& Brake Single. Inch, Cont. Stroke Variable Speed 7.563 Hours Machine Specifications: Model S2-150 Tonnage.150 Stroke.8" Shut Height On Bed.24" Adjustment.8" Bed Area.48" x 30" Ram Area.48" x 30" Strokes.40- 80 SPM Shipping Point: CA Price: $24.500.00*SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655
|
|
|
30 Ton Minster Straight Side High Production Press (#21767)
Reference#21767 30 Ton Minster Straight Side High Production Press Age 1983 Serial No. TR2-30-25488 Model: Pulsar 30 Capacity. 30 Tons Slide Stroke. 1.250" Stroke Per Minute. 1200 SPM Shut Height Adjustment. 1.75" Shut Height Range on Bolster. 7.25"9" Quick Access Travel. 1.75"3.5" Area of Slide. 30" x 12" Area of Bolster. 30" x 21" Distance Floor to Bolster Top. 50" Distance Floor to Bottom of Bed. 18.25" Opening in Bolster. 26" x 4" Main Drive Motor. 25 HP Press Weight. 18.800 lbs EQUIPPED WITH: T-Slotted Bolster Plate Quick Access to Dies Fast Start& Stop Dynamically Balanced Drive Flush Floor Standing. Contact for Machine Location
|
|
|
250 Ton Straight Side Blow Press
250 Ton Straight Side Blow Press Tonnage- 250, Bed Area- 72" x 40" Stroke- 8" Ram Adjustment- 9.75" Minimum Shut Height- 14.25" Maximum Shut Height- 24" Overall Height- Approx. 14ft. Floor Standing- Yes, Feel free to contact me for more photos or to dicker and deal Please note: This machine is being marketed outside of Ebay and is subject to prior sale. All machines are sold in"as is condition no warranty" FOB Canada. If the machine is not picked up after 30 days it will be considered abandoned and become property of Affordable Machinery to dispose at our discretion.
|
|
|
200 Ton Straight Side Blow Press
200 Ton Straight Side Blow Press Tonnage- 200 Model- SD-20-72 Bed Area- 72" x 40" Stroke- 8" Ram Adjustment- 8" Minimum Shut Height- 12" Maximum Shut Height- 20" Overall Height- Approx. 14ft. Floor Standing- Yes, Feel free to contact me for more photos or to dicker and deal Please note: This machine is being marketed outside of Ebay and is subject to prior sale. All machines are sold in"as is condition no warranty" FOB Canada. If the machine is not picked up after 30 days it will be considered abandoned and become property of Affordable Machinery to dispose at our discretion. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-1419d0aa1ff-0xfb-
|
|
|
1,000 Ton Bliss Straight Side Press
1.000 Ton Bliss Straight Side Press Year 1971 Capacity 1,000 Tons Stroke 20″ Bed Area 144″ x 96″ Speed 14 to 28 SPM Variable Speed Main Motor 200 HP Rolling Bolster Equipped with: Air Clutch and Brake, Air Counterbalances
|
|
|
300 Ton Verson Straight Side Press 96" x 42" Bed
Verson Straight Side Press Capacity 300 Tons Year 1981 Bed Area 96" x 42" Slide Area 96" x 42" Stroke 8" Shut Height 22" Slide Adjustment 5" Spped 40- 80 SPM Equipped with: Air Clutch an Brake. Air Counter Balance, T" Slots, Smart Pac, Triad Light Curtains( servo feeder in not included at this price but is available) Machine runs well and can be inspected under power mid west plant Feel free to contact me for more photos or to dicker and deal Please note: This machine is being marketed outside of Ebay and is subject to prior sale. All machines are sold in"as is condition no warranty" FOB Michigan. If the machine is not picked up after 30 days it will be considered abandoned and become property of Affordable Machinery to dispose at our discretion.
|
|
|
Very nice 75 Ton Bliss High Speed Straight Side Press
Bliss High Speed Press Model HP2-75-60-30 Capacity 75 Tons Stroke 3" Adjustment 3" Bed Area 60" x 30" Shut Height 24" to bed Speed 60 to 180 SPM Equipped with: Air Clutch and Brake. Wintress Die Protection and Analyzer, New bolster plate and sub plate, cleaned and painted sold in as is condition. FOB Delton Michigan 49046, machines are being marketed outside of Ebay and subject to prior sale, any Crating/Palletizing will be additional cost to the buyer Posted with
|
|
|
40 ton Havir Straight Side punch press (SSSC) Chicago area with PA servo feed
40 Ton Havir Straight Side(SSSC) Press Serial Number H684FT-103X257 2" stroke Speed Range: 50-250 Spm Shut Height: 7.5-9.5" Under Power and available for inspection with appointment Includes: Light curtains with mechanical guards Press feet. AC Tech Motor Control. PA Servo Feed SRF-100(S/N 7220397) w/control cabinet. Stroke was changed on press about 15 years ago so stroke. Shut height and speed are now incorrect on nameplate. All sales are as-is. Where-is, with all faults. We make our best effort to fully describe every item so that you may confident in your purchase, but we cannot make any guarantees due to the used nature of our items. We recommend a personal inspection for all items to verify accuracy and suitability to your project. Buyer is responsible for all rigging and moving costs. Any rigger will have to provide proof ... moreof insurance of at least $2 million. Thank you for your interest. Discounts can be arranged if you purchase multiple presses.
|
|
|
200 Ton Bliss Straight Side Double Crank Press 6-70
Up for sell is a super clean bliss 200 ton press super solid machine it has been layed on its face for hailing and moving it's a model 7-60 I couldn't read the tag on the machine to see stroke or adjustment but I maybe able to later when I move it around just give me a call with any questions I will load at no charge call or text tripp at 336 479 6847 thanks
|
|
|
(1) Used 150 Ton Heim 2-Point Eccentric Geared Straight Side Press
Description: 1) Used 150 Ton Heim 2-Point Eccentric Geared Straight Side Press Model: S2-150-78-42. Age: 1980. Specifications: Serial Number: 2620. Capacity: 150 Ton. Stroke: 4" Shut Height: 13" Adjustment: 6" Bed& Side Area: 78" L-R x 42" F-B. Speed: 45 Strokes/Minute. Windows: 24" Wide. Equipped With: Air Clutch. 2) Air Counterbalances. 3" Bolster Plate. Automatic Lubrication. Motor& Electrics. Console Controls. Palm Button Actuators. Approximate Dimensions: 106" L-R x 65" F-B x 135" High. Approximate Weight: 20.272lbs. BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. QUOTES MAY BE PROVIDED UPON REQUEST. ITEM IS SOLD"AS IS. WHERE IS" AND AN INSPECTION IS ENCOURAGED. PLEASE CALL 586-569-0150 FOR AN INSPECTION APPOINTMENT OR WITH ANY QUESTIONS.
|
|
|
250 Ton Bliss Straight Side Press
Bliss Straight Side Press Model SC2-250-84 Year 1972 Capacity 250 Ton Stroke 6″ Slide Adjustment 10″ Bed Area 84″ x 42″ Slide Area 84″ x 42″ Speed 35 to 70 SPM Equipped with: Air Clutch and Brake. Air Counter Balances, Main Motor and motor starters,Control has been removed and not included, Call 616.200.4308 or email me at sales@affordable-machinery.com! We also purchase surplus heavy machinery! CALL FOR MORE INFORMATION! Used Metal Stamping Presses- we buy and sell such brands as Minster. Verson, Clearing, Bliss, Danly, Komatsu, Aida, Stamtec and more. If you are in the market for a used press or other used machines, let us know. Dealing in High Speed Presses, Straight Side Presses, Hydraulic Presses, Molding Presses, OBI Presses, Gap Presses, used Feed Lines, Coil Reels, Coil Cradles and Used Punch presses. Posted with
|
|
|
250 Ton CLEARING Model S2-250-84-48 Straight Side Press; 12" Str.; 11" R.A
Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Rec# 1925. 1) Used 250 Ton CLEARING Model S2-250-84-48 Straight Side Press; S/N 51-1339. Specifications: Capacity.250 Ton. Stroke.12" Shut Height Over Bed(SDAU)32" Power Ram Adjustment.11" Bed Area.84" L-R x 48" F-B. Slide Area.4" L-R x 48" F-B Distance Between Housings.85 1/2" Bed Opening.N/A. Window Opening.18" L-R Speed.30 S.P.M. Distance Bed to Floor.40" Electrical Characteristics.220/440 VAC/ 3 Phase/ 60 Cycle. Equipped With: Complete Electrical Controls. T-Slotted Bolster Plugs. Lubrication System. Air Cushion Overall Dimensions.148" L-R x 105" F-B x 108" High(est. Weight.84.000 lbs. F.O.B.Casa Grande. AZ. Please contact us about shipping rates before you request a ... morerate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, straight-side, straightening& extrusion) pre
|
|
|
60 Ton Minster Model 6SS-FB Straight Side Single Crank Press, S/N 28208 (1994)
5383- Minster Straight Side Single Crank Press Manufacturer: Minster Model: 6SS- FB S/N: 28208 Year: 1994 Specifications: Tonnage 60 Ram Stroke 4" Ram Adjustment 2.75" Shut Height 16" Bed Size(L-R. F-B) 32" x 21" Ram Size(L-R. F-B) 24" x 14" Opening Thru Back 15" Throat Depth 11" Strokes Per Minute(Variable) 90- 180 Dimensions(L x W x H) 72" x 60" x 128" Weight 14.500 Lbs. Equipped With: Air Clutch& Brake Link Lite Blackmax Light Curtains Wintress Safety Controls(Load& Die Protection) Remote Control Panel With Dual Palm Controls Digital SPM& Motor Load Indicator T- Slotted Bolster Auto Lube System Horsepower: 10 Location: Huntington Park.CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection ... moreis encouraged. No warranties expressed or implied. Please call 323-587-1887 for an inspection appointment or questions. Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains ves
|
|
|
400 Ton Bliss High Speed Straight Side Press Model:HP2-400-48-36 S/N: H61922
4540- Bliss High Speed Straight Side Press Manufacturer: Bliss Model: HP2-400-48-36 S/N: H61922 Year: Specifications: Tonnage 400 Stroke 1 1/2" Strokes Per Minute 75-150 Bed 36" x 62" Slide 36" x 54" Shut Height To Bed 24" Slide Adjustment 4" Motorized Window In Uprights 32" Wide Equipped With: Tie Rod Frame Bolster Plate Air Clutch& Brake Air Conterbalances Motor& Control Floor Standing Location: Pontiac. Mi. BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. No warranties expressed or implied. Please call 323-587-1887 for an inspection appointment or questions. Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. ... morePayment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment of all amounts due under this Agreement. 2. Taxes: Prices do not include any federal. State, or local taxes, which are in addition to the purchase price and must be paid by Buyer. Any and all fore
|
|
|
75 Ton Minster Straight Side Double Crank Press Model: P2-75-36-31 S/N: 17753
4499- Minster Straight Side Double Crank Press Manufacturer: Minster Model: P2-75-36-31 S/N: 17753 Year: Specifications: Tonnage 75 Stroke 1" Strokes Per Minute 100-300 Bed 31" x 36" Slide 18" x 35" Shut Height 14" To Bed Bolster Plate 5" Thick Slide Adjustment 2" Window In Uprights 12" Wide Equipped With: Tie Rod Frame Motor& Controls Air Clutch& Brake 8" Wide CWP Single Roll Feed Location: Pontiac. Mi. BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. No warranties expressed or implied. Please call 323-587-1887 for an inspection appointment or questions. Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS ... more1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment of all amounts due under this Agreement. 2. Taxes: Prices do not include any federal. State, or local taxes, which are in addition to the purchase price and must be paid by Buyer. Any and all
|
|
|
100 Ton Sutherland Model HD1- 100 Hydraulic Straight Side Press, S/N 23112
INDUSTRIAL ASSETS MACHINERY IS PLEASED TO OFFER FOR YOUR CONSIDERATION: REFERENCE# 5140 Sutherland Hydraulic Straight Side Press MODEL: HD- 100 S/N: 23112 Year: 1998 Specifications: Tonnage 100 Ram Stroke 23.6" Daylight 31.4" Closed Height 7.87" Bed Size(L-R. F-B) 47" x 39" Ram Size(L-R. F-B) 47" x 39" Ram Speeds: Approach 590 IPM Pressing 28 IPM Return 590 IPM Dimensions(LxWxH) 98" x 95" x 165" Weight 27.000 Lbs. Equipped With: Allen Bradley SLC- 503 Programmable Control 8 Point Gibbing STI Light Curtains Heat Exchanger T- Slotted Bed& Ram Auto Lube System Remote Dual Palm Control Stand Horsepower: 25 Location: Huntington Park. CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please ... morecall 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment o
|
|
|
30 Ton Bliss Straight Side S.C. High Speed Press; Flywheel Drive; Re-mfg. 2005
More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website REC# 3326(1) Used 30 Ton Bliss Straight Side S.C. High Speed Press; Flywheel Drive; Re-mfg. 2005 Specifications: Capacity: Bottom of Stroke.30 tons Mid-Stroke. Bed Area.14" x 20" Bed Opening.12" L-R x 6" F-B Slide Area.16" L-R x 8" F-B Distance Between Housings.20" Distance Between Gibbs.16 1/2" Window Opening.6 7/8" L-R x 9 1/2" T-B Stroke.2" est. Daylight Opening.10" est. Shut Height Over Bed(SDAU)8" est. Distance Floor to Bed.32" Power Ram Adjustment.3" est. Speed.50- 200 SPM Main Drive Motor.7 1/2 HP Electrical Characteristics.240/480 VAC/ 3 Phase/ 60 Cycle Equipped With: PA Microprocessor Control AC/Brake 7 1/2 HP VFD Delta Wintriss Autoset 1500 Load ... moreMonitor 6 cam RLS Ross Dual Sol. Valve Automatic Lubrication System 12" x 10ga C.O.E. Servomaster 3" Servo Roll Feeder(2007. Optional) Approx. Overall Dimensions.79" L x 64" W x 110" H Weight.5.500 lbs. est. F.O.B.Casa Grande. AZ*Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experienc
|
|
|
VERSON MODEL 300T 330 TON STRAIGHT SIDE PRESS
VERSON MODEL 300T 330 TON STRAIG VERSON MODEL 300T 330 TON STRAIGHT SIDE PRESS Item Description REBUILT IN 2004 Specification Description TONNAGE: 330 TON BED BOLSTER SIZE: 96" X 60" WINDOWS: 30" X 20" MACHINE DIMENSIONS(L X W) 182" X 143" Equipped With: OMRON PROGRAMMABLE CONSOLE. MODEL 2W1080 CUSHION Refund Policy We offer a 5 day DOA exchange policy(All shipping/handling cost are the buyer's responsibility) DOA item must be returned for RMA inspection, If exchange is not possible. A refund will be issued less shipping/handling Operating hours Monday-Friday 9:00am- 5:00pm( EST) Eastern Standard Time We can be reached at 905-635-7530 ext.21 or cel# 905-630-5911 Payment Terms International buyers must pay buy wire transfer. For Canadian& US buyers. We accept Paypal up to $500.00 US Max. Auctions over ... moreUS$500.00 must pay by wire transfer within 48 business hours from auction close. Payment must be received by our bank within 72 business hours after auction closes. If payment terms are not met. Item will be relisted or offered to the under bidder without further notice. An Unpaid Item Dispute WILL be filed for ALL unpaid items after 7 days as allowed by eBay and are subject to relisting Ontario Residents please add 13%HST. Customs brokerage fees and duty charges may apply. Shipping Info Canadian and US Buyer s to prepay actual shipping costs. Loading. Skidding, Crating or Special Packaging Fee may apply to the item being auctioned if required. Charges will be determined according to the size and sensitivity of the item. Item will be shipped 3-5 business days after payment has been secured. Insurance is offered at an additional cost and must be requested by the buyer in advance to shipping. Paypal payments will be shipped to confirmed addresses ONLY! All winner notifications will be sent to the email address that is registered with EBay. We reserve the right to cancel your bid if you have a feedback rating of 9 or less or have been a non-conforming bidder in the past. We reserve
|
|
|
Minster TR3-30 "PULSAR" High Speed, Double Crank, Straight Side Press # 1797
FOB Hamilton. MI Click to view larger photo Specification Description Capacity: 30-Ton, Stroke: 1.25" Speed: 1200 SPM, Adjustment: 1.75" Bed: 33" L-R x 21" F-B, Shut Height to Bolster: 7.25" 9" Equipped With: Vamco JB6-6 Feed Holland Equipment Hunters. Inc. 3345 60th St Hamilton. MI 49419 269-751-5169 269-751-7433
|
|
|
ROUSSELLE 4SS44 40-TON PUNCH / PRESS MACHINE, SSDC STRAIGHT SIDE DOUBLE CRANK
Rousselle 4SS44 Punch Press 40 Ton 4 ss44 This listing is for a press. This unit was removed from a company that closed down. We can help arrange shipping. Or you may send it your own truck to pick it up(we will load) Any questions. Please call Dale at(480) 229-1215. Listed Information. Make: Rouselle, Model/ Part# 4SS44 Description: Two Point Straight Side 40 Tons. Rousselle Two Point Straight Side, Includes all/only items pictured. Here is some information from the manufacturer. Standard Features. Steel Fabricated, Air Clutch, Shoe Brake, Wrist Pin Connection, V Gibbing, Air Counterbalance System, Eccentric Shaft Motion, Bolster Plate, One Shot Lubrication, Manual Slide Adjustment, Solid State Press Control(ANSI B11.1) Nema 12 Enclosure Mounted on Press, Operator Station with Dual Run. Emergency Stop and Stop on Top Palm Buttons, Supervisory ... moreKey Selector Switch for Off. Single Stroke, Inch or Continuous Mode, Brake Monitor, Motion Detector, Dual Air Valve, Pressure Switches for Clutch/Brake and Counterbalance, Forward/Reverse Feature, Stroke Counter, Specifications. Capacity(Tons) Near B.D.C. 40, Bed Area(Left-to-Right x Front-to-Back) 44 x 22, Strokes Per Minute(Non Geared) 105, Strokes Per Minute(Geared) 45, Shut Height S.D.A.U. Refer To Shut Height Chart, Slide Area(Left-to-Right x Front-to-Back) 40 x 14, Slide Adjustment: 3, Bed Opening(Left-to-Right x Front-to-Back) 36 x 14, Opening Between Uprights(Left to Right) 44, Opening Between Uprights(Front to Back) 12, Crankshaft Diameter(Main Bearing) 3-1/4, Crankshaft Diameter(Connecting Rod) 6-1/4, Flywheel Diameter(Non Geared) 33, Flywheel Diameter(Geared) 22, Flywheel Weight(lbs) Non Geared) 800, Flywheel Weight(lbs) Geared) 300, Motor Horsepower: 3, Motor Speed(RPM) Non Geared) 1175, Motor Speed(RPM) Geared) 1750, Florr to Top of Bed: 33-1/4, Overall Height With Standard Shut Height: 114, Floor Space at Base(Left to Right) 59, Floor Space at Base(Front to Back) 33-1/2, Disclaimer The item offered here is
|
|
|
ROUSSELLE S2-250-72-36 MECHANICAL STRAIGHT SIDE PRESS B24301
Inventory# 24301. ROUSSELLE S2-250-72-36 MECHANICAL STRAIGHT SIDE PRESS Preliminary Specification. Please call 847-427-3333 to verify. Catalogue Specifications. Capacity: 250 Ton Stroke: 8" Shut Height Over Bed(SDAU) 17" Slide Adjustment(Power) 8" Bed Area: 72" L-R x 36" F-B Slide Face Area: 72" L-R x 36" F-B(T-Slotted) Window Openings: 24" W Distance Bed to Floor: 36" Speed(Variable) 30- 60 SPM Air Clutch and Brake with Selector Controls 8-Point. Square-Type Adjustable Slide Gibs Welded Steel Construction Arranged For(4) Knockouts F-B Flush Floor Design EQUIPPED WITH: 2) Air Counterbalance Cylinders to Slide(3) Pneumatic Cushions in Bed T-Slotted Bolster Plate(6" Thick) Automatic Lubrication System Revees Mechanical Vari-Speed Drive 25 HP AC Main Drive Motor Electrical Controls Dual Palm ... moreButton Operation Approximate Overall Dimensions: 112" L-R x 74" F-B x 174" HApproximate Weight: 45000 Lbs Serial Number: 22641 Year(New 1978) Preliminary Specifications Subject to Verification. Questions about this item? Email us at OR Call our Sales Staff at 1-888-254-8808 Terms of Sale: Payment All payments are to be made in United States dollars. Payment in full must be received prior to shipping. Fees Prices do not include any federal. State or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes PMS with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of PMS, be added to the quoted purchase price and invoiced by PMS to Purchaser. The failure of PMS to invoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes. Machinery and Equipment Some machinery and equipment is located at Fortune 100 Manufacturing Facilities. Most of the machinery and equipment located at these Facilit
|
|
|
60 Ton Minster Model P2-60-36 High Speed Straight Side Punch Press, S/N 23735
800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 5042- Minster High Speed Straight Side Punch Press Manufacturer: Minster Model: P2D- 60- 36 S/N: 23735 Year: 1978 Specifications: Tonnage 60 Ram Stroke 3" Ram Adjustment 3" Shut Height 24 1/2" Bed Size(L-R. F-B) 36" x 25" Ram Size(L-R. F-B) 33" x 21" Window Size 12" x 10 3/4" Strokes Per Minute(Variable) 0- 200 Dimensions(L x W x H) 106" x 56" x 128" Weight 17.000 Lbs. Equipped With: Air Clutch& Brake Coe Model CPRF- 12 Servo Feeder. 12" x 0.078" With Programmable Control Helm Loadguard Model TLG 4500 Overload Protection System Power Ram Adjustment Blow Off T- Slotted Bolster& Ram Auto Lube System Remote Control Cabinent With Dual Palm Control Barrier Guards Horsepower: 10 Location: ... moreHuntington Park.CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed
|
|
|
300-Ton Minster Straight Side Double Crank Press E2-300-84-48
300-Ton Minster E2-300-84-48 Stock Number 1713114, Model E2-300-84-48, Age 1978, Stroke 12" Power Ram Adjustment 6" Shut Height on Bed 30" Windows 27" Bed 84" x 48" Strokes per minute 0-80 spm, Overall Dimensions 198" H x 124" RL) x 75" FB, Weight 100.000 Lbs. Air Clutch& Brake, Recirculating Lube System, Optional Wintress controls Available, Inspection Report for Press Available, Feed Line Available but not included w/ Press: 36" Power Roll Feed. 10,000# Coil Reel 36" Wide, 32" Straightener w/peeler(call for feed line details) PAYMENT We accept Paypal. Wire Transfer, Check(must wait until clears to pick up) and Cash. We also accept credit cards direct(Visa, Mastercard, American Express, Discover) with a 3% service charge. Payment must be made in full within 4 days of a winning ... morebid. CONTACT US You may contact us 9 AM- 5 PM Eastern Time weekdays at 419-536-4445. You can also use eBay's messaging feature. After hours. Contact Alex at 419-350-2986. If you purchase a"Local Pickup Only" item, please contact us as soon as possible for pickup or shipping instructions. SHIPPING If a shipping price is listed. We will ship within 2 business days after payment clears. The majority of our items are marked as"Local Pickup Only" This means that you are responsible for making freight arrangements, including palletizing, disassembly, rigging, loading, and transport. For your convenience, we offer all of these services for a fee based on the size/ complexity of the item. If your item requires freight shipping, please take into account the costs associated. Items not picked up within 30 days of payment may be subject to a storage charge of $25 per day. Items will be considered forfeit after 90 days, or after storage costs exceed the price of the item, whichever comes first. TERMS All sales are as-is. Where-is, with all faults. We make our best effort to fully describe every item so that you may confident in your purchase, but we cannot make any
|
|
|
Minster 800 Ton 90-800 Knuckle Joint Straight Side Press # 1516
Click to view larger photo Specification Description Capacity: 800 Ton, Stroke: 7" Adjustment of Slide, 1/2" Shut Height to Bed: 23.62, Shut Height on Bolster: 18.75" Opening in Upright: 6.5" Area of Slide: 27.5" x 18" Area of Bed: 32" x 36" Opening in Bed: 3" Distance Between Gibs: 28.5" Strokes Per Minute: 40, Approximate Weight: 125.000 Lbs, Equipped With: Die Cushion Holland Equipment Hunters. Inc. 3345 60th St Hamilton. MI 49419 269-751-5169 269-751-7433
|
|
|
MINSTER S2-300-120-54 MECHANICAL STRAIGHT SIDE PRESS B24437
Inventory# 24437. MINSTER S2-300-120-54 MECHANICAL STRAIGHT SIDE PRESS Preliminary Specification. Please call 847-427-3333 to verify. Catalogue Specifications. Capacity: 300 Ton Stroke: 14" Shut Height Bed to Slide(SDAU) 29" Powered Slide Adjustment: 14" Bed Area: 120" L-R x 54" F-B Slide Area: 120" L-R x 54" F-B Window Opening: 22" W Distance Bed to Floor: 32" Speed(Variable) 14- 28 SPM EQUIPPED WITH: 4) Air Counterbalances to Slide T-Slotted Bolster Plate(3) Die Cushions(22J. 7" stroke) Automatic Recirculating Lubrication System Minster Air Clutch and Brake with Selector Controls AC Main Vari-Speed Drive Motor Tie Rod Construction Arranged for(3) F-B Knockouts Enclosed Gears Running in Oil AC Adjustment Motor Electrical Controls Dual Palm Button Operation(Pedestal Mounted) Approximate Overall ... moreDimensions: 200" L-R x 100" F-B x 220" HApproximate Weight: 135000 Lbs Serial Number: 22771 Year(New 1975) Preliminary Specifications Subject to Verification. Questions about this item? Email us at OR Call our Sales Staff at 1-888-254-8808 Terms of Sale: Payment All payments are to be made in United States dollars. Payment in full must be received prior to shipping. Fees Prices do not include any federal. State or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes PMS with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of PMS, be added to the quoted purchase price and invoiced by PMS to Purchaser. The failure of PMS to invoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes. Machinery and Equipment Some machinery and equipment is located at Fortune 100 Manufacturing Facilities. Most of the machinery and equipment located at these Facilities is disconnected and canno
|
|
|
MINSTER P2-60-36 PIECEMAKER STRAIGHT SIDE PRESS B30545
Inventory# 30545. MINSTER P2-60-36 PIECEMAKER STRAIGHT SIDE PRESS Preliminary Specification. Please call 847-427-3333 to verify. Catalogue Specifications. Capacity: 60 Ton Slide Stroke: 1.5" Shut Height to Top of Bolster: 9" Shut Height to Bed: 12.5" Upright Opening: 12" Press Speed: 0- 500 SPM Bolster Area: 36" L-R) x 25" F-B) Main Drive Motor: 10HP. 1800 RPM Approximate Overall Dimensions: 98" L-R x 62" F-B x 108" HApproximate Weight: 16000 Lbs Serial Number: 21342 Year(New 1974) Preliminary Specifications Subject to Verification. Questions about this item? Email us at OR Call our Sales Staff at 1-888-254-8808 Terms of Sale: Payment All payments are to be made in United States dollars. Payment in full must be received prior to shipping. Fees Prices do not include any federal. State or local taxes, ... morewhich are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes PMS with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of PMS, be added to the quoted purchase price and invoiced by PMS to Purchaser. The failure of PMS to invoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes. Machinery and Equipment Some machinery and equipment is located at Fortune 100 Manufacturing Facilities. Most of the machinery and equipment located at these Facilities is disconnected and cannot be seen under power. Unless specifically listed in writing by PMS. All machinery and equipment uses 3 Phase power. All machine sales are subject to machine availabilty. Loading/Freight Charges All rigging. Insurance and freight charges are the responsibility of the Purchaser unless agreed by PMS and Purchaser in writing. A qualified rigger with a minimum of $2,000,000 liability insurance must perform all removal of machinery or equipment. N
|
|
|
MINSTER P2-45-48 PIECEMAKER HIGH SPEED STRAIGHT SIDE PRESS B30544
Inventory# 30544. MINSTER P2-45-48 PIECEMAKER HIGH SPEED STRAIGHT SIDE PRESS Preliminary Specification. Please call 847-427-3333 to verify. Catalogue Specifications. Press Capacity: 45 Ton Slide Stroke: 3" Slide Adjustment: 3" Shut Height to Top of Bolster: 12" Shut Height to Bed: 15.5" Upright Opening: 12" Press Speed: 0-300 SPM Bolster Area: 48" L-R x 25" F-B Bolster Thickness: 3.5" Main Drive Motor: 15HP. 1800 RPM Approximate Overall Dimensions: 100" L-R x 60" F-B x 126" HApproximate Weight: 18000 Lbs Serial Number: 18928 Year(New 1970) Preliminary Specifications Subject to Verification. Questions about this item? Email us at OR Call our Sales Staff at 1-888-254-8808 Terms of Sale: Payment All payments are to be made in United States dollars. Payment in full must be received prior ... moreto shipping. Fees Prices do not include any federal. State or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes PMS with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of PMS, be added to the quoted purchase price and invoiced by PMS to Purchaser. The failure of PMS to invoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes. Machinery and Equipment Some machinery and equipment is located at Fortune 100 Manufacturing Facilities. Most of the machinery and equipment located at these Facilities is disconnected and cannot be seen under power. Unless specifically listed in writing by PMS. All machinery and equipment uses 3 Phase power. All machine sales are subject to machine availabilty. Loading/Freight Charges All rigging. Insurance and freight charges are the responsibility of the Purchaser unless agreed by PMS and Purchaser in writing. A qualified rigger with a minimum of $2,000,000 liab
|
|
|
Minster Model E2-200-30-30 200 Ton Straight Side Double Crank Press
Item#2059 Minster Model E2-200-30-30 200 Ton Straight Side Double Crank Press Equipped With: Machine Specifications: Stroke: 2" Strokes per minute: 40-100 Bed: 30" X 30" Slide: 30" X 30" Shut height: 21" to Bed Bolster plate: 5" Thick Slide adjustment: 6" motorized Air clutch& brake Air counterbalances Window in Uprights: 21" Wide 30 HP Motor& controls Floor standing Tie Rod Frame Shipping Point: IL Price $43.000.00*SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling Not Included Call Kevin Brewster for all your equipment questions– P.203-441-4655– C.860-483-0905 g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-146c7fdce7f-0x110-
|
|
|
100 Ton Minster Straight Side Single Crank Press Model: S1-100-24-30 S/N: 9945
3754- Minster Straight Side Single Crank Press Manufacturer: Minster Model: S1-100-24-30 S/N: 9945 Year: Specifications: Tonnage 100 Ram Stoke 5" Ram Adjustment 5" Shut Height 14" Bed Size(L-R. F-B) T-Slotted) 24" x 30" Ram Size(L-R. F-B) 24" x 24" Strokes Per Minute 37 Tonnage Of Die Cushion 19 Cushion Stroke 2 1/2" Window Size(W x H) 13" x 16" Dimensions(W x D x H) 80" x 80" x 133" Weight 17.500 LBS Location S. El Monte. CA/SME Equipped With: Air Clutch& Brake Tie Rod Construction Triad Light Curtains IMCO Controls Farval One Shot Lube System Dual Air Counter Balance Power Ram Adjustment Dual Palm Control On Machine Electric Foot Pedal Horsepower: 10 Location: So. El Monte. CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as ... moreis. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY QUOTE DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified on the front of this invoice, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this mac
|
|
|
100 Ton Minster Piece Maker High Speed Straight Side Press Used Machinery
100 Ton Minster Piece Maker High Speed Straight Side Press This item is Used- not New Model#P2-100-54-31 Serial#27573 Age 1991 Tie rod frame Stroke 5" Strokes per minute 0- 120 Bed 31" x 54" Slide 24" x 49" T-slotted Shut height 17" to bed Bolster plate 5" thick. T-slotted Slide adjustment 4" Motorized Air clutch& brake Air counterbalances Window in uprights 16" wide 20 HP motor& control Floor standing(3) Front to Back Servo Feeders Please contact us with any questions. We will load equipment onto open top trailer only. There is no charge for loading. The FOB point is Michigan. Within 30 days time after the equipment is loaded onto truck. You can return mechanically unsatisfactory equipment to our Michigan warehouse for a refund of the purchase amount. The buyer is responsible for all transportation ... morecosts. Equipment needs to be returned in the same condition as it left our warehouse. If you return an item. We will not charge you for Ebay listing costs or any restock charge. Payment is to be made within seven days of auction close. We accept wire transfer. Company check or certified check. Equipment will be available immediately after funds have cleared. Loading time: Monday-Friday, 7am- 2:30pm. NOTE: Listed Below are additional terms which limit the obligation of Planet Machinery and Further Define the Quotation. Unless otherwise expressly stated above. The above-identified equipment is sold"as is" There are no warranties, expressed or implied, which extend beyond the description on the face hereof. There is no warranty of fitness for a particular purpose and no warranty of merchantability. Purchaser is aware that, if installed without modification, this eqjuipment might not conform to potentially applicable federal, state, local or industry safety standards(such as OSHA, ANSI etc. As sold this equipment may not incorporate approved activating mechanisms, operator safety devices, safety guards or other potentially required safety devices. Pursuant to
|
|
|
1985 CMC Bliss 150 Ton Straight Side Double Crank Press
1985 CMC Bliss 150 Ton Straight Side Double Crank Press. Model S2-150-60x42. Serial# J-9842 This press is in service and operating. But we need to bring in a press that is more suited to the work at hand. We will keep the feeder and the sub plate that is attached to the slide. Specifications: Capacity 150 tons Bed Area 60" x 42" Slide Area 54" x 36" Stroke 10" Shut Height over Bolster 20" Slide Adjustment(rebuilt motor 2005) 4" SPM 30 Windows 24" Floor Standing Equipped With: 2 Air Cushions Light Curtain T-Slotted Bolster and Slide. Air Clutch and Brake Air Counter Balances Updated Controls. Pressroom Electronics Press Commander PCS-2000 T-Stand Operator Control w/2 Hand Trip 2 Parts Counters Wired for 230 volt operation Contact me and I'l send a link to a video of the press running. Payment to ... morebe made by bank wire transfer. FOB loaded on truck. Tulsa, OK. Sold as is, no return. Do not use Paypal. I can't delete it from the listing. For questions call 918-486-4515.
|
|
|
150 TON VERSON STRAIGHT SIDE SINGLE CRANK PRESS
150 TON VERSON STRAIGHT SIDE SINGLE CRANK PRESS MODEL C1-150-30(1954) 150 Tons 8" Stroke 4" Adjustment 40 Strokes Per Minute 18-1/2" Shut Height 30" x 30" Bed
|
|
|
HAVIR 150 TON STRAIGHT SIDE DOUBLE CRANK PRESS
General Specifications Capacity 150 TONS Ram Area 59’ X 48” Bed Area 59” X 48” Adjustment 3” Windows 18” X 34” Equipped With Flush Floor Design Palm Buttons Reeves Drive Eaton Air Clutch Air Counterbalance Any questions? 414-264-5848 More pictures at alecomachinery.com Loading included.
|
|
|
HTC 150 TON 150-MS STRAIGHT SIDE PRESS
General Specifications Capacity Forming 150 Tons Punching 100 Tons Stroke 0- 7" Shut Height 14" Maximum Bed Area(Nominal) 158" L-R x 49" F-B Slide Area: 158" L-R x 49" F-B Distance Between Housings: 125" L-R Distance Between Gibs: 113" L-R Windows: 20" L-R x 27" High Floor to Bed: 37" Speeds Approx. 56"Min. closing 21"Min. Pressing to 150 Tons 110"Min. Return Main Motor 15 HP Equipped With Flush Floor Press Pushbutton Operation w/Stroke& Pressure Control Dual Palm Buttons Electric Foot Switch Pressure Gauge Trabon Automatic Lubrication System Heat Exchanger Approximate Overall Dimensions 156"L X 88" F-B X 134"H Approximate Overall Weight 45000 LBS Any questions? 414-264-5848 More pictures at alecomachinery.com Loading included.
|
|
|
L & J 150 TON 4 INCH STROKE STRAIGHT PRESS
L& J 150 Ton 4" Stroke Straight Side Press. Perfecto Push Pull Feeds with Scrap Chopper. 54" x 36" Bed. 4 inch Stroke. 20.5 inch Shut Height, 0- 80 SPM. Model# L&JPM2150. 480 V. 30 Amps. 60 Cycles. Weight Approx. 40.000 lbs. Dims: 7'W x 4'D x 13'T
|
|
|
VERSON 300TON MODEL C2-300-108-60 STRAIGHT SIDE PRESS
YOU ARE LOOKING AT AVERSON 300TON STRAIGHT SIDE PRESS! TAKE IT HOME! MACHINE IS READY FOR WORK-MUST GO! CHEAPEST ONE ON THE MARKET. WONT FIND ANOTHER FOR THIS PRICE! VERSON STRAIGHT SIDE PRESS CAPACITY: 300TON MODEL: C2-300-108-60 TABLE: 108" X 60" SHUT HEIGHT: 36" ADJUSTMENT: 22" MACHINE IS IN GOOD WORKING CONDITION GOOD MACHINE. READY TO WORK! LOCATED: MEXICO CITY. MEXICO MACHINE HAS BEEN DISASSEMBLE AND IS READY TO SHIP. COME SEE IT- CAN BE INSPECTED AT ANY TIME! A LOT OF MACHINE FOR LITTLE MONEY! MACHINE MUST GO. HUGE OPPORTUNITY. DONT MISS OUT! TAKE ADVANTAGE- MACHINE IS PRICE AGGRESSIVELY FOR FAST SALE! VERSON PRESS WILL BE SOLD! TAKE IT HOME. PLEASE BE ADVISE- MACHINE IS BEING SOLD"AS IS" THIS IS A USED MACHINE AND NOT A NEW ONE. IT HAS SOME NORMAL WARE AND USSAGE. MACHINES ARE BEING SOLD AT A GREAT PRICE ... moreFOR FAST SALE! Hablamos Español* IMPORTANT NOTICE: MAKE AN INSPECTION ON THE MACHINE BEFORE BIDDING OR IF YOUR BIDDING IS CONTINGENT UPON INSPECTING IT. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND. THIS VERSON PRESS IS USED AND HAS BEEN LISTED AT A GREAT PRICE FOR FAST SALE! Note: PAYMENT MUST BE MADE WITHNG 48 HOURS AFTER BIDDING ENDS. PLEASE CONTACT US BEFORE MAKING ANY PAYMENT. IF YOU ARE A FLORIDA STATE BUYER DON'T FORGET TO ADD 7% SALES TAXES TO YOUR TOTAL ITEM PRICE. IF YOU WOULD LIKE TO INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING IT. PLEASE DO SO BEFORE THE END OF THE AUCTION OR PLACING A BID. WE ENCOURAGE BIDDER TO INSPECT THE EQUIPMENT. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND SINCE IS A USED MACHINE. WE WILL LOAD THE MACHINE ON YOUR TRUCK AT NO ADDITIONAL COST! THANK YOU. GOOD LUCK AND HAPPY BIDDINGS!
|
|
|
Straight-Side Press: 250T Johnson, 6" St., 22" S.H., 72" x 36", 40-120 SPM, '64
1) Used 250 Ton SOUTH BEND-JOHNSON Straight Side Double Crank Press, Model S2-250. S/N 64-095 Specifications: Capacity: 250 Ton Stroke of Slide: 6" Slide Adjustment(Motorized) 8" Shut Height to Bed(SDAU) 22" Bed Area: 72" x 36" Windows: 15" L-R Distance Bed to Floor: 34" Speeds(Variable) 40- 120 SPM Motor Drive: 40 HP 3/60 Overall Dimensions(Approx. 160" L-R x 70" F-B x 222" H Weight(Est. 80.000 Lbs. Equipped With: SSC 2000 T-Controls(Retrofit in 1999) 2) Air Counterbalance Cylinders to Slide T-Slotted Bolster(7” Thickness) Air Clutch and Controls/ Dual Palm Button Operation Automatic Lubrication System F.O.B. Elk Grove Village. IL.
|
|
|
CLEARING 200 TON STRAIGHT SIDE PRESS 96” X 48” BED
CLEARING 200 TON STRAIGHT SIDE PRESS 96” X 48” BED S/N 17332. 12” STROKE, 18” SHUT HEIGHT, 12” ADJUSTMENT, GEMCO SENSOR CONTROL. BANNER LIGHT-CURTAINS FRONT& REAR, DUAL PALM BUTTONS ON STAND& AIR CLUTCH. PRICE INCLUDES LOADING ON YOUR TRUCK. CURRENTLY RUNNING EVERYDAY. REASON FOR SELLING IS WE HAVE ACQUIRED A 300 TON TO REPLACE IT. CALL TYLER AT(615) 812-1314 FOR MORE INFORMATION. BUYER IS RESPONSIBLE FOR SHIPPING ARRANGEMENTS
|
|
|
300 Ton US Industries Straight Side Press 60" x 48" With 50 Ton Cushion Used
300 Ton US Industries Straight Side Press 60" x 48" With 50 Ton Cushion Used Make: US Industries Tonnage: 300 Ton Model# S2-300-60-48 S/N: 51-1164 Year Approx. 1964 Stroke: 12" SPM: 20 Shunt Height: 18" Adjustable Slide: 8" Dual Bottom Cushions: Yes Bed to Floor Height: 49-1/4" T-Slotted Bolster Plate Size: 60" x 48" x 4-1/8" Bed Area: L-R 67-3/4" F-B 48" Top Ram Area: 60" Wide x 48" Deep Slide Area: 61-1/4" x 48" Actual Top Ram Area: 60" Wide x 48" Front to Back Lube System: Yes HP: 50 Hp Input Voltage of Main Motor: 440 Volts. 3 Phase, 60 Hz. Presently wired for 480 VAC, 3 Ph, 60 Hz. Amps: 63.3 Amps at 440 Volts AC Safety Curtain: Both Sides: Data Instruments. Wintriss Controls Group, Shadow V Cushion: 50 Ton Weight: 70.000 Lbs. Height: 15 ft. 6" Condition: ... moreUsed. In good working order. Our Ref: 11-25-13 Pics NOTE: Selling this press FOB Buffalo. NY(14211) Buyer must load with an approved Rigger& Insurance. We will not take PayPal. Balance due prior to pickup shall be Wire Transfer of US Funds. Removal shall be in no longer then 30 days from purchase or with written arrangements with seller. Please Call Tim on 716-876-9600 with any questions. Normal 0 MicrosoftInternetExplorer4 For more information. Concerning this item you may contact Timothy by e-mailing info@atmsupplyco.com or calling 716-876-9600 if you are within the USA. No calls from out of the country please. But email us with any questions. Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 SHIPPING& HANDLING- F.O.B. Buffalo. NY(14211) Buyer is responsible for setting up the shipping with preferred carrier. We cannot accept Freight Quote bill-of-laden per company terms. We can quote freight charges with proper COMPLETE ship to address and telephone number. We will supply any trucking company with our properly filled out bill-of-laden. Removal of item must take place in 10 days after payment is received, otherwise additional storage char
|
|
|
OAK 48-LP-200-449 STRAIGHT SIDE PRESS B29347
Inventory# 29347. OAK 48-LP-200-449 STRAIGHT SIDE PRESS B29347. Preliminary Specification. Please call 847-427-3333 to verify. Catalogue Specifications. Capacity: 200 Ton Stroke: 1" Shut Height: 20.5" Adjustment: 4" Bed Area: 48" L-R x 30" F-B Speed: 150-400 VSPM EQUIPPED WITH: Air Clutch and Brake Air Counterbalances Recirculating Lubrication System 7" Thick Bolster Plate Free Standing Press Controls 31" Wide Windows Floor Standing 6" wide Oak Press Feeder Approximate Overall Dimensions: 101" L-R x 73" F-B x 134" HApproximate Weight: 50000 Lbs Serial Number: LP-200-449 Year N/A* Preliminary Specifications Subject to Verification. Questions about this item? Email us at OR Call our Sales Staff at 1-888-254-8808 Terms of Sale: Payment All payments are to be made in United States dollars. ... morePayment in full must be received prior to shipping. Fees Prices do not include any federal. State or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes PMS with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of PMS, be added to the quoted purchase price and invoiced by PMS to Purchaser. The failure of PMS to invoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes. Machinery and Equipment Some machinery and equipment is located at Fortune 100 Manufacturing Facilities. Most of the machinery and equipment located at these Facilities is disconnected and cannot be seen under power. Unless specifically listed in writing by PMS. All machinery and equipment uses 3 Phase power. All machine sales are subject to machine availabilty. Loading/Freight Charges All rigging. Insurance and freight charges are the responsibility of the Purchaser unless agreed by PMS and Purchaser in writing. A qualified
|
|
|
FEDERAL S2-80-48-30 STRAIGHT SIDE PRESS B19395
Inventory# 19395. FEDERAL S2-80-48-30 STRAIGHT SIDE PRESS B19395. Preliminary Specification. Please call 847-427-3333 to verify. Catalogue Specifications. Capacity: 80 Ton Stroke: 2" Shut Height Over Bed(SDAU) 16" Slide Adjustment: 4" Bed Area: 48" L-R x 30" F-B Slide Face Area: 48" L-R x 30" F-B Window Openings: 12" W Distance Bed to Floor: 48" Speed(Variable) 100- 300 SPM Air Clutch and Brake with Selector Controls Arranged for(2) Knockouts F-B Crankshaft Extension Left-Side Tie Rod Construction EQUIPPED WITH: Dynamic Feed Model 1035LR Slide Feed(35" W x 10" Stroke; Feeds F-B) 2) Air Counterbalance Cylinders to Slide Bolster Plate(3-3/4" Thick) Automatic Centralized Lubrication System Electrical Vari-Speed Drive 15 HP AC Main Drive Motor(w/AC Speed Adjustment Motor) Updated Electrical ... moreControls(w/Omron Sysmac C28K Programmable Control) Dual Palm Button Operation Approximate Overall Dimensions: 90" L-R x 84" F-B x 150" HApproximate Weight: 29000 Lbs Serial Number: S2-2106 Year(New 1967) Preliminary Specifications Subject to Verification. Questions about this item? Email us at OR Call our Sales Staff at 1-888-254-8808 Terms of Sale: Payment All payments are to be made in United States dollars. Payment in full must be received prior to shipping. Fees Prices do not include any federal. State or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes PMS with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of PMS, be added to the quoted purchase price and invoiced by PMS to Purchaser. The failure of PMS to invoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes. Machinery and Equipment Some machinery and equipment is located at Fortune 100 Manufacturing Fa
|
|
|
MINSTER PIECE MAKER PM2-60-36 STRAIGHT SIDE HIGH SPEED PRESS B32770
Inventory# 32770. MINSTER PIECE MAKER PM2-60-36 STRAIGHT SIDE HIGH SPEED PRESS B32770. Preliminary Specification. Please call 847-427-3333 to verify. Catalogue Specifications. Capacity: 60 Ton Stroke: 1.25" Shut Height Bed to Slide(SDAU) 16.5" Slide Adjustment: 2" Bolster(L.R. F.B. 36 x 26 Speed: 1000 SPM Air pressure: 60 psi Approximate Overall Dimensions: 98" L-R x 52" F-B x 124" HApproximate Weight: 25000 Lbs Serial Number: 23361 Year(New 1978) Preliminary Specifications Subject to Verification. Questions about this item? Email us at OR Call our Sales Staff at 1-888-254-8808 Terms of Sale: Payment All payments are to be made in United States dollars. Payment in full must be received prior to shipping. Fees Prices do not include any federal. State or local taxes, which are in addition to the purchase price ... moreand must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes PMS with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of PMS, be added to the quoted purchase price and invoiced by PMS to Purchaser. The failure of PMS to invoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes. Machinery and Equipment Some machinery and equipment is located at Fortune 100 Manufacturing Facilities. Most of the machinery and equipment located at these Facilities is disconnected and cannot be seen under power. Unless specifically listed in writing by PMS. All machinery and equipment uses 3 Phase power. All machine sales are subject to machine availabilty. Loading/Freight Charges All rigging. Insurance and freight charges are the responsibility of the Purchaser unless agreed by PMS and Purchaser in writing. A qualified rigger with a minimum of $2,000,000 liability insurance must perform all removal of machinery or equipment. No Purchaser will be allowed to load their own mach
|
|
|
150 Ton Verson Model 150-B2-96 Straight Side Double Crank Press
6399- Verson Straight Side Double Crank Press Manufacturer: Verson Model: 150-B2-96 S/N: 27417 Year: 1978 Specifications: Tonnage 150 Ram Stroke 8" Ram Adjustment 5" Shut Height 30" Bed Size(L-R. F-B) T- Slotted) 96" x 42" Ram Size(L-R. F-B) T-Slotted) 96" x 42" Window Size 30" Strokes Per Minute 35 Dimensions(L x W x H) 137" x 115" x 158" Weight 40.000 Lbs. Equipped With: Air Clutch& Brake STI Light Curtains Link Logic Brake Monitor Dual Air Counter Balance Power Ram Adjustment Auto Lube System Remote Dual Palm Control Stand Horsepower: 25 Location: Huntington Park. CA. BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions ... moreIndustrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment of all amounts due under this Agreement. 2. Taxes: Prices
|
|
|
60 Ton Minster Model 6SS-FB Straight Side Single Crank Press, S/N 27662 (1991)
6412P- Minster Straight Side Single Crank Press Manufacturer: Minster Model: 6SS-FB S/N: 27662 Year: 1991 Specifications: Tonnage 60 Ram Stroke 5" Ram Adjustment 2 3/4" Shut Height 14 1/2" Bed Size(L-R. F-B) 32" x 21" Ram Size(L-R. F-B) 24" x 14" Throat Depth 11" Opening Through Back 15" Strokes Per Minute 120 Dimensions(L x W x H) 72" x 60" x 128" Weight 14.500 Lbs. Equipped With: Air Clutch& Brake Air Counter Balance Triad Brake Monitor Dual Palm Control Auto Lube System Horsepower: 10 Location: Painesville. OH BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington ... morePark Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment of all amounts due under this Agreement. 2. Taxes: Prices do not include any federal. State, or local taxes, whi
|
|
|
500 Ton Verson, Model E-S1-500-SP Straight Side Single Crank Press, S/N 28187
6320- Verson Straight Side Single Crank Press Manufacturer: Verson Model: E-S1-500-SP S/N: 28187 Specifications: Tonnage 500 Ram Stroke 10" Ram Adjustment 6" Shut Height 37" Bed Size(L-R. F-B) 46" x 36" Ram Slide Size(L-R. F-B) 36" x 36" Strokes Per Minute 35- 60 Windows Size 18" Mechanical Lift Out 25 Ton Mechanical Lift Out Stroke 2 1/2" Dimensions(L x W x H) 145" x 114" x 247" Weight 118.000 Lbs. Equipped With: Air Clutch& Brake Air Counter Balances Auto Lube System Single Back Geared Horsepower: 100 Location: Lima. OH. BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave ... moreAve Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment of all amounts due under this Agreement. 2. Taxes: Prices do not include any federal. State, or local
|
|
|
2500 Ton Clearing Model H-2500-60 Hydraulic Downacting Straight Side Press
6350C- Clearing Hydraulic Downacting Straight Side Press Manufacturer: Clearing Model: H-2500-60 S/N: Year: Specifications: Tonnage 2.500 Ram Stroke 24" Open Height 45 1/2" Bed& Ram Size(T-Slotted) 60" x 60" Ram Speeds: Approx. Approach 60 IPM Forming 24.5 IPM Return 60 IPM Ram Cylinder Diameter 48" Window Size 21" Oil Pressure 2.400 PSI Oil Reservoir 900 Gallons Depth Of Pit(Approx. 72" Dimensions(L x W x H) Machine) 128" x 93" x 22' Dimensions(L x W) Hydraulic System On Top) 200" x 190" Weight(Approx. 276.975 Lbs. Equipped With: 2- Pull Back Cylinders Horsepower: 125 Location: Los Angeles. CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection ... moreappointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment of all amounts due under this
|
|
|
1600 Ton Bliss SE2-1600-132-60 Straight Side Double Crank Press
1600 Ton Bliss SE2-1600-132-60 Straight Side Double Crank Press Questions call 419-350-2986- SPECIFICATIONS: Capacity. 1600 Ton Stroke. 30" Shut Height(SDAU) 60" Adjustment. 12" Bed. 60" x 132" Speed(Continuous) 13 SPM Speed(Single Stroke) 10 SPM Adjustment Speed. 3 IPM Main Motor. 200 HP/ 1200 RPM Slide Motor. 20 HP/ 1800 RPM Flywheel Energy. 397.000 lb/ stroke Overall Dimensions. 224" W x 92" D x 445" H Overall Weight. 493,000 lb Equipped with: 2) Pneumatic Cushions, UCC 28-24-15(1) Pneumatic Cushion, UCC 34-30-15
|
|
|
90 Ton Tangent Straight Side Press
90 Ton Tangent Straight Side Press Model: LMD800A Year: 1987 Machine stored outside. Will need to be reconditioned! Sold as is. This machine is advertised locally and subject to prior sale. Payment is due at the end of the auction. All machines must be picked up within 30 days. Any machine not pickup within 30 days will be considered abandoned and maybe resold at the sellers discretion.
|
|
|
200 Ton Niagara Model SC2-200-96-48 Straight Side Double Crank Press
Open M-F 7:00 am– 4:00 pm(323)587-1887 Monday 7:00 am– 4:00 pm Tuesday 7:00 am– 4:00 pm Wednesday 7:00 am– 4:00 pm Thursday 7:00 am– 4:00 pm Friday 7:00 am– 4:00 pm Saturday Closed Sunday Closed Leading dealer of used industrial machines in Los Angeles. Over 1000 Machines in Inventory! We buy. Sell, auction and appraise used machinery. Check out our store to see our inventory of press brakes. Shears, lathes, punch presses, press brakes and much more used machinery for sale. Financing Available Check out my! Be sure to add me to your! by adding my eBay Store to your Favorites Instragram#iamachinery https:plus.google.com/+Iamachineryla/videos INDUSTRIAL ASSETS MACHINERY IS PLEASED TO OFFER FOR YOUR CONSIDERATION: Stock# 6774C- Niagara Straight Side Double Crank Press Manufacturer: Niagara Model: SC2-200-96-48 S/N: P53295 Year: 1990 Specifications: ... moreTonnage 200 Ram Stroke 12" Ram Slide Adjustment 10" Shut Height 44" Bed Size(L-R. F-B) 96" x 48" Ram Size(LL-R. F-B) 96" x 48" Floor To Top Of Bed 35" Strokes Per Minute(Variable) 20- 40 Window Size(W x H) 25" x 20" Dimensions(L x W x H) 125" x 96" x 203" Weight 60.200 Lbs. Equipped With: Floor Standing. No Pit Required Location: Huntington Park. CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an i
|
|
|
AMINO SDP15WA HYDRAULIC STRAIGHT SIDE PRESS B33720
Inventory# 33720. AMINO SDP15WA HYDRAULIC STRAIGHT SIDE PRESS B33720. Preliminary Specification. Please call 847-427-3333 to verify. Catalogue Specifications. Capacity: 1650 Ton Stroke: 39.3" Daylight: 70.8" Rolling Bolster: 78.7" x 70.8" EQUIPPED WITH: 2) 200 Ton Cushions Serial Number: 8937 Year(New 1989) Preliminary Specifications Subject to Verification. Questions about this item? Email us at OR Call our Sales Staff at 1-888-254-8808 Terms of Sale: Payment All payments are to be made in United States dollars. Payment in full must be received prior to shipping. Fees Prices do not include any federal. State or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes PMS with a tax exemption ... morecertificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of PMS, be added to the quoted purchase price and invoiced by PMS to Purchaser. The failure of PMS to invoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes. Machinery and Equipment Some machinery and equipment is located at Fortune 100 Manufacturing Facilities. Most of the machinery and equipment located at these Facilities is disconnected and cannot be seen under power. Unless specifically listed in writing by PMS. All machinery and equipment uses 3 Phase power. All machine sales are subject to machine availabilty. Loading/Freight Charges All rigging. Insurance and freight charges are the responsibility of the Purchaser unless agreed by PMS and Purchaser in writing. A qualified rigger with a minimum of $2,000,000 liability insurance must perform all removal of machinery or equipment. No Purchaser will be allowed to load their own machinery or equipment unless proof of insurance is submitted prior and all other factory requirements are met. Loading dock hours are 7:00a.m.2:00p.m. Monda
|
|
 |