|
Order by:
Available to:
This site contains affiliate links for which I may be compensated
|
Buy It Now
Condition: Used Location: Milwaukee, United States 16" x 32" Okamoto Model PSG-84AN 1632N 3 Axis Hydraulic Surface Grinder(1987) Specifications and Equipment Maximum Grinding Length: 32" ... moreMaximum Grinding Width: 16" Max. Distance Under 14" Dia. Wheel: 20.5" Surface Length of table: 33.5" Surface Width of table: 14.25" Maximum Longitudinal Movement: 37.4" Maximum Cross Movement: 16.9" Hydraulic Feed: Up To 100 FPM, Automatic Feed Per Table Stroke: 000015" 0011" Equipped With: 16" x 32" Electromagnetic Chuck with Neutrofier Over the Wheel Dresser. 3 Axis Incremental Downfeed, Coolant Filtration System with Magnetic Separation, Machine being sold As Is. Buyer is responsible for shipping. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-145d76308af-0x113-
Buy It Now
Condition: Used Location: Toledo, United States MODEL. ACC 12-24DX. Table Size. 12″ x 24″. Chuck size. 12" x 24". Grinding Wheel Size. 14″/ 12″ x 1 1/2″ x 5″. Rapid Traverse. 16 FPM. Max Work Height. ... more13.7″ (Under 12″ Wheel).
Buy It Now
Condition: Used Location: Toledo, United States WHEEL DRESSER. OVER-HEAD AUTO. ELECTRO MAGNETIC CHUCK. FINE POLE. Table Feed. . 2 TO 30 m/min. SMART LINE 6 COMFORT. Table load. . 880 LBS (400 KG). Speed ... moreRANGE. 1000 TO 3000 RPM.
Buy It Now
Condition: Used Location: Toledo, United States
Buy It Now
Condition: Used Location: Toledo, United States DOWNFEED. AXIS SOKKI DRO. TABLE SIZE. 18" X 120". OVERALL CHUCK SIZE. 18" X 120". GRINDING WHEEL. 20" OD X 6" W X 10" ID. MOTOR. 30 HP.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Manufacturer: HARIG. Model Number: SUPER 618. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads ... more(flat bed, step deck, double drop, etc.). We will provide you with a competitive rate that is only valid if prepaid on our account.
Buy It Now
Condition: Used Location: Toledo, United States MODEL. ACC 12-24DX. Table Size. 12″ x 24″. Chuck size. 12" x 24". Grinding Wheel Size. 14″/ 12″ x 1 1/2″ x 5″. Rapid Traverse. 16 FPM. Max Work Height. ... more13.7″ (Under 12″ Wheel).
Buy It Now
Condition: Used Location: Toledo, United States Hydraulic Pump Motor. . Power Cross Feed of Column. 60 in/min. Table Speed. . 13 to 70 ft/min. CAPACITY. . 16″ X 40″. Electromagnetic Chuck. 16" X 40".
Buy It Now
Condition: Used Location: Cedarburg, United States MITSUI SEIKI 8" X 18" HYDRAULIC SURFACE GRINDER. SONY DRO MODEL #: LH10-2017. AUTO VERT. WORKING SURFACE OF TABLE: 8" x 19". MAXIMUM SURFACE GROUND: 9-1/2" ... morex 20". SURFACE AND SPINDLE CENTER: 22-1/2".
Buy It Now
Condition: Used Location: Guilford, United States Make: Chevalier Model: FSG-3A1224 Year: 2004 Condition: Used Overall in Excellent Shape. Distance from Table Surface to Spindle Centerline: 24.8" Standard ... moreMagnetic Chuck Size: 11 3/4" x 23 5/8" Travel, Hydraulic: 25 5/8" Max.
Buy It Now
Condition: Used Location: Toledo, United States OVER THE WHEEL DRESSER. . HYDRAULIC MOTOR. . 2 HORSEPOWER. CROSS TABLE TRAVEL. . 18". MODEL. . FSG-1632AD. GRINDING WHEEL SIZE. . 14" X 2" X 5".
Buy It Now
Condition: Used Location: Detroit, United States Vertical Rapid Feeder………………………………………. Max Vertical Clearance……………. …………………… 13.7". Floor Space………………………………………………….103” x 74” x 73”. Surface Length……………………………………………. ... moreSurface Width…………………………………………….
Buy It Now
Condition: Used Location: Toledo, United States HYDRAULIC TABLE FEED. HYDRAULIC CROSS FEED.
Buy It Now
$10.00 Shipping Condition: New Location: Fullerton, United States It is Two way flow. Throttle Valve only, no Check Valve. Orders under 150 lbs. Orders above 150 lbs. Piscataway, NJ 08854.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. OVERALL AREA OF CHUCKS. 30" X 72". WHEEL SIZE. . 18" X 6". DUAL ELECTROMAGNETIC CHUCKS. 30" X 36". WHEEL HEAD MOTOR. . 30 HORSEPOWER.
Buy It Now
Condition: Used Location: Toledo, United States OVERHEAD WHEEL DRESSER. HYDRAULIC MOTOR. . 1-1/2 HORSEPOWER. VERTICAL HAND WHEEL ADJ. CHUCK MAGNALOCK FINE LINE. 10" X 30" X 3". MODEL. D 1030-14.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Manufacturer: CINCINNATI. Model Number: 261. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads ... more(flat bed, step deck, double drop, etc.). We will provide you with a competitive rate that is only valid if prepaid on our account.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Model Number: 11AD20. Manufacturer: BLANCHARD. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads ... more(flat bed, step deck, double drop, etc.). We will provide you with a competitive rate that is only valid if prepaid on our account.
Buy It Now
Condition: Used Location: Holland, United States OVER THE WHEEL DRESSER YES. HYDRAULIC MOTOR 3 HORSEPOWER. COOLANT WITH PAPER FILTER YES. GRINDING CAPACITY 16" X 40". CROSS TABLE TRAVEL 16". TABLE SPEED ... more(VARIABLE) 16 TO 82 FPM. MODEL FSG-1640AD. GRINDING WHEEL SIZE 14" X 2" X 5".
Buy It Now
Condition: Used Location: Lincolnshire, United States Bed and Saddle — The optimized rib layout and high-rigidity bed structure (with a low center of gravity) were developed through extensive structural analysis. ... moreThe massive bed and thick saddle support heavier work-pieces with outstanding precision and flatness.
Buy It Now
Condition: Used Location: Toledo, United States HYDRAULIC MOTOR. . 2 HORSEPOWER. CHUCK SIZE ON MACHINE. . 10" X 20". AUTOMATIC CROSSFEED. . TABLE SPEED (VARIABLE). 16 TO 82 FPM. MODEL. . FSG-1224AD.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Manufacturer: MALCUS. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, ... moredouble drop, etc.). We will provide you with a competitive rate that is only valid if prepaid on our account.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. HYDRAULIC TABLE TRAVEL. 0 TO 100 FPM. CAPACITY. . 24" X 120". LONGITUDINAL TABLE TRAVEL. 120. 20" X 120" X 4-1/2". WHEEL HEAD CROSS ... moreTRAVEL. 24".
Buy It Now
Condition: Used Location: Toledo, United States HYDRAULIC MOTOR..: 2. MAX TABLE LOAD..: 924 LBS. TABLE SIZE.: 12" X 24". WHEEL SIZE.: 14" X 2" X 5" BORE. APPROXIMATE OVERALL WEIGHT: 4,630 LBS.
Buy It Now
Condition: Used Location: Cedarburg, United States Model #: FSG-1632 TXII. Chevalier Surface Grinder. Includes: Coolant tank w/Paper Filter Drag Option to assist in keeping Coolant clean. 16" x 32" electromagnetic ... morechuck.
Buy It Now
$10.00 Shipping Condition: New Location: Fullerton, United States It is Two way flow. Throttle Valve only, no Check Valve. Orders under 150 lbs. Orders above 150 lbs. Piscataway, NJ 08854.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Model Number: NO.55A. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, ... moredouble drop, etc.). We will provide you with a competitive rate that is only valid if prepaid on our account.
Buy It Now
Condition: Used Location: Phoenix, United States Preowned 9" x 20" SHARP Hydraulic Surface Grinder. Model: SH-920, S/N: 90105-01(New 2001) Table travel: longitudinal cross Spindle center to ... moretable surface Table working surface Longitudinal hydraulic table feed Intermittent cross feed Continuous cross feed Cross feed graduations Cross feed per revolution of handwheel Vertical feed graduations Vertical feed per revolution of handwheel Grinding wheel size(OD x Width x ID) 27.6" 11" 19.3" 9" x 19.7" 6.6-82 F.P.M. 004-4 I.P.M. 39 I.P.M. 0005" 1" 0001" 05" 14" x 1" x 5" Equipped with: Hydraulically actuated longitudinal feed Electro-mechanically actuated cross feed Programmable microprocessor spindle downfeed system in surface or plunge modes of operation. Fully automatic grindng cycle including coarse and fine grinding settings. Spark out, retraction of wheelhead to a pre-set distance at the completion of the cycle, and table park to the right side. Data input via handheld operators remote pendant. 9-3/4" x 19-5/8" KIN JUNG fine division electromagnetic chuck with KANETSU control Over-the-wheel parallel dresser Wheel balancing stand and arbor(1) Wheel mount Work light Automatic lubrication system External dust collection system with 1/2 H.P. 3/60/220-440 volt suction motor External coolant pump and tank with magnetic separator and paper filtration External hydraulic system with 3/4 H.P. 3/60/220-440 volt pump motor 3 H.P. 3/60/220-440 volt direct drive spindle motor and electrical controls Machine is wired for 220 volt operation. Approximate Weight: 3.800 Lbs. Approximate Dimensions(Machine Only) 73" L-R x 63" F-B x 66" H Condition: Exceptional We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
Buy It Now
Condition: Used Location: Milwaukee, United States Chevalier FSG-3A818- 8” x 18” Hydraulic Surface Grinder Serial# M3842001 Asset# 9734 Specifications: Table Size 8” x 18” Max. Grinding Length 18” Max. ... moreGrinding Width 8” Max. Distance from Table to Spindle Centerline 18” Standard Magnetic Chuck Size 7 7/8” x 17 3/4” Longitudinal Table Travel 19 3/4” Table Speed. Variable 16-82 FPM Cross Traverse Travel Rapid Travel 48 IPM Auto Transverse Increment 0.02-0.24” Max. Auto Transverse Travel 9” Max. Manual Transverse Travel 9 1/2” Handwheel per Revolution.2” Handwheel per Graduation 0.001” Wheelhead Vertical Infeed Automatic Infeed 0.0001”0.002” Handwheel per Revolution 0.1” Handwheel per Graduation 0.0005” Rapid Travel 13 ipm Micro Feed per Revolution 0.01” Micro Feed per Graduation 0.0001” Grinding Spindle Drive Speed 60hz/3450rpm Power Rating 2 HP Hydraulic Drive 1 HP Cross Feed Drive.05 HP Elevating Drive 1/4 HP Standard Grinding Wheel 8” x 1/2” Grinding Wheel Bore 1 1/4” Dimensions 90” x 62” Height 68” Weight 2620 lbs. Preliminary Specifications- Subject to Verification Purchasing Information: There is a chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check and paypal 30 Day Return Privilege Policy: Returns are accepted on this item within 30 days of shipment Buyer pays the return shipping costs to our facility Machine must be returned in the condition it was received Money back refund provided Freight and Shipping: The machine is located in Alto. Michigan(49302) There is no charge to load onto buyer's truck Shipping costs to buyer location are not included with the machine price We can provide a freight quotation. Buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required. We quote crating or palletizin
Buy It Now
Condition: Used Location: Los Angeles, United States Overhead Hydraulic Wheel Dresser. We also carry a wide variety of tooling at competitive prices. Surface Grinding. LOCAL PICKUP IS FREE, LOADING ONTO ... moreA FLATBED OPEN TRUCK OR BOX VAN. NO CONTAINERS!
Buy It Now
Condition: Used Location: Hialeah, United States
Buy It Now
$10.00 Shipping Condition: New Location: Fullerton, United States Hydraulic Stainless Liquid Gauge 100kg AT-100 1/4" 2-1/2" (Outlet Style). Orders under 150 lbs. Orders above 150 lbs. Fullerton Office. Piscataway Office. ... more100% Made in Taiwan. Piscataway, NJ 08854.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Manufacturer: GARDNER / ELOX. Model Number: 618 / DD-451B. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial ... moretruckload loads (flat bed, step deck, double drop, etc.).
Buy It Now
Condition: Used Location: Bay Shore, United States Wt: approx 900 lbs. 208/220/440 3 Phase. w/ Accessories.
Buy It Now
Condition: Used Location: Holland, United States YODER # 70688. We load for free. DOWNFEED 24 X 120". MAGNETIC CHUCK 20" X 6" GRINDING WHEEL. YODER MACHINERY SALES.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Inventory Number: 12240120003. Capacity: 48"X12". Model Number: 65. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or ... morepartial truckload loads (flat bed, step deck, double drop, etc.).
Buy It Now
Condition: Used Location: Bay Shore, United States KO Lee 6 x 18 Surface Grinder J-225. Hydraulic and manual. 6" x 18" Fine Pole Chuck. Good Usable Condition: "Item may have marks, dents, imperfections ... morebut which do not compromise performance/functioning.".
Buy It Now
Condition: For parts or not working Location: Euclid, United States Manufacturer: ELB. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, double ... moredrop, etc.). We will provide you with a competitive rate that is only valid if prepaid on our account.
Buy It Now
Condition: Used Location: Holland, United States Magnetic Chuck Size 12" X 36". Grinding Capacity 12" x 40". Variable Table Speed, Hyd 16' to 82' FPM. Standard Grinding Wheel 14" Dia. x 2" W x 5" B. ... moreMaximum Height Under New Wheel 14". Micro-feed, Per Revolution 0.0005".
Buy It Now
$16.00 Shipping Condition: New Location: Fullerton, United States Hydraulic Hidraman Solenoid Valve SWH-G02-C2-A110-10 Northman. Orders under 150 lbs. Orders above 150 lbs. 100% Made in Taiwan. Piscataway, NJ 08854.
Buy It Now
Condition: Used Location: Bentley, United States G&L Surface Grinder. 1.5 HP hydraulic pump motor. 8 x 24 table, max travel is 29" and has an 8 x 22 electromagnetic chuck on it. 4200 lbs weight. 2420 ... morerpm wheel.
Buy It Now
Condition: Used Location: Holland, United States VERTICAL HANDWHEEL GRADUATION 0.0002". CHUCK FINE LINE 6" X 18". SPINDLE CENTER TO TABLE TOP 21" MAX. CAPACITY 8" X 18". HYDRAULIC TABLE SPEEDS 16 TO ... more67 FPM. MODEL KSG250AHD. T SLOT NUMBER & SIZE 1-9/16".
Buy It Now
$19.15 Shipping Condition: New – Open box Location: Cedar, United States ITEM 2579.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Manufacturer: ELOX. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, ... moredouble drop, etc.). We will provide you with a competitive rate that is only valid if prepaid on our account.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. GRINDER WORK CAPACITY. . 96" X 24" X 16" HIGH. OVER THE WHEEL DRESSER. . HYDRAULIC MOTOR. . 10 HORSEPOWER. TABLE BED WAY COVERS. ... moreYES.
Buy It Now
Condition: Used Location: Holland, United States OVERHEAD WHEEL DRESSER YES. 2 AXIS NEWALL DIGITAL READOUTS DP700. MAXIMUM TABLE LOAD CAPACITY WITH CHUCK 320 LBS. CHUCK FINE LINE 6 "X 18 "X 4". CAPACITY ... more6" x 18". SPINDLE CENTER TO TABLE 18". MODEL SUPRA-618ASDII.
Buy It Now
Condition: Used Location: Los Angeles, United States 20" x 30" Used ELB-Schliff Automatic Hydraulic Surface Grinder (Heavy Duty, Very Accurate), Mdl. SPA 2030, Electromagnetic Chuck, Coolant System With ... moreSplash Guard, #A7465. Grinder Wheel Size14" X 3" X 5".
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. VERTICAL CAPACITY. 30" UNDER 20" WHEEL. GRINDING WHEEL. 20" x 6". (2) 24" x 36" Electro Magnetic. TABLE SIZE. . May inspect under ... morepower. SPLASH GUARDS. . YES.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. GRINDER WORK CAPACITY. . 96" X 24" X 16" HIGH. OVER THE WHEEL DRESSER. . HYDRAULIC MOTOR. . 10 HORSEPOWER. TABLE BED WAY COVERS. ... moreYES.
Buy It Now
$16.00 Shipping Condition: New Location: Fullerton, United States Catalog: Chuan Tai Hydraulic Components. Hydraulic Filler Breather Filters (Stainless) FB-1801. Orders under 150 lbs. Orders above 150 lbs. 2320 E Valencia ... moreDr. Piscataway, NJ 08854.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. WHEEL SIZE. 20" X 4" X 12". 40 HORSEPOWER SPINDLE MOTOR. TABLE SPEED (VARIABLE). 10 TO 100 FPM. Performs as expected. May inspect ... moreunder power.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Winnetka, United States Hydraulic System. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. This Manual Covers Models Pictures of the ... moreMachine Says A Thousand Words. I will search for your specific Needs Continually.
Buy It Now
Condition: Used Location: Toledo, United States OVER THE WHEEL DRESSER. . CROSS TABLE TRAVEL. . 18". MODEL. . FSG-1632AD. GRINDING WHEEL SIZE. . 14" X 2" X 5". TABLE SPEED (VARIABLE). .
Buy It Now
Condition: Used Location: Toledo, United States MODEL. . 1236. HYDRAULIC MOTOR. . 3 HP. MAGNETIC CHUCK. . 14" X 36" ELECTRIC. TABLE TRAVELS. .
Buy It Now
$10.00 Shipping Condition: New Location: Fullerton, United States Inline Check Valve 3/8" CV-03. Orders under 150 lbs. Orders above 150 lbs. Fullerton Office.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. LONGITUDIANL HYDRAULIC TABLE TRAVEL. 20". ONE SHOT LUBE. . Performs as expected. May inspect under power. SPINDLE MOTOR. .
Buy It Now
Condition: Used Location: Holland, United States CONTINUOS CROSS FEED TRAVEL VARIABLE 4 - 40 IPM. AUTO CROSS FEED. 02 TO. 8. HYDRAULIC DRIVE MOTOR 2HP. CAPACITY 12" x 24". MAGNETIC CHUCK 12" X 24" X ... more3" THICK. MAX UNDER WHEEL 12". HYDRAULIC TABLE TRAVEL 1 TO 100 FPM.
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. TABLE WORKING SURFACE. 10.6" X 23.6". HEIGHT UNDER WHEEL. 19". MAGNETIC CHUCK. . 12" X 23.5". Performs as expected. May inspect ... moreunder power. GRINDING MOTOR. . 3 HORSEPOWER.
Buy It Now
Condition: Used Location: Milwaukee, United States Pre Owned Kent Model KGS-250AHD Surface Grinder. Spindle Motor HP 2HP. Overall Table Working Area 8” X 18”. Dust Collector. 8” X 18” Fine Pole Magnetic ... moreChuck. Grinding Wheel Dims 8” X 3/4” X 1 14”. Hydraulic Unit.
|
|
12” x 12” OKAMOTO MODEL 124N ACCUGAR PRECISION HYDRAULIC SURFACE GRINDER
Item#1867 12” x 12” OKAMOTO MODEL 124N ACCUGAR PRECISION HYDRAULIC SURFACE GRINDER Equipped With: 12" x 24" Walker Fine Line Electro Magnetic Chuck and Controls. Incremental(Automatic) Down Feed. Hydraulic Power Longitudinal and Cross Feeds. Power Rapid Wheelhead Elevation. Cross Feed Control. Table Speed Control. Step Feed Control. Coolant Pump& Tank. Machine Specifications: New 1990 Motor Driven with 5 HP. 3-Phase, 60 cycle, 230/460 Volt Grinding Spindle Drive. 2 HP Hydaulic Power Suppy Unit. AC Motor for Downfeed. MD Lubrication. Working Surface of Chuck 12" X 24" Maximum Grinding Length 24" Maximum Grinding Width 12" Max. Dist. Under 12" 13.7" Wheel to Table Top Maximum Longitudinal Travel 29.5" of Table Maximum Cross Travel of Table 13.6" Surface Length of Pad 30" Surface Width ... moreof Pad 11.8" T-Slot(No. x Width) of Table Feeds 3" x.669" LONGITUDINAL MOVEMENT OF TABLE Hydraulic Feed Per Revolution 1- 100 FPM Hand Feed per Revolution 1.85" CROSS MOVEMENT OF TABLE Hydraulic Intermittent Feed 0.02" 0.8" Hydraulic Continuous Feed Per Minute 4- 40 IPM Hand Feed Per Revolution.25" Graduation of Handwheel.002" VERTICAL MOVEMENT OF WHEEL HEAD Automatic Feed Per Table Stroke(OPT) 0.001- 015" Automatic Feed Per Table Reversal 0.001- 015" Graduation of Handwheel.0002" Hand Feed Per Revolution 0.05" SPECIFICAITONS: Vertical Rapid Feed 19 IPM GRINDING WHEEL(Standard) OD x Width x ID 12" X 1.5" X 5" Spindle Revolution(60Hz) 1800 Floor Space 78" X 72" X 68" Approximate Weight 4.900 Lbs. Shipping Point: IL Price $14.500.00*SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling Not Included Call Kevin Brewster for all your equipment questions– P.203-441-4655– C.860-483-0905
|
|
9734 Chevalier FSG-3A818 - 8" x 18" Hydraulic Surface Grinder
Chevalier FSG-3A818- 8” x 18” Hydraulic Surface Grinder Serial# M3842001 Asset# 9734 Specifications: Table Size 8” x 18” Max. Grinding Length 18” Max. Grinding Width 8” Max. Distance from Table to Spindle Centerline 18” Standard Magnetic Chuck Size 7 7/8” x 17 3/4” Longitudinal Table Travel 19 3/4” Table Speed. Variable 16-82 FPM Cross Traverse Travel Rapid Travel 48 IPM Auto Transverse Increment 0.02-0.24” Max. Auto Transverse Travel 9” Max. Manual Transverse Travel 9 1/2” Handwheel per Revolution.2” Handwheel per Graduation 0.001” Wheelhead Vertical Infeed Automatic Infeed 0.0001”0.002” Handwheel per Revolution 0.1” Handwheel per Graduation 0.0005” Rapid Travel 13 ipm Micro Feed per Revolution 0.01” Micro Feed per Graduation 0.0001” Grinding Spindle Drive Speed 60hz/3450rpm Power Rating 2 HP Hydraulic Drive 1 HP Cross Feed Drive.05 HP Elevating ... moreDrive 1/4 HP Standard Grinding Wheel 8” x 1/2” Grinding Wheel Bore 1 1/4” Dimensions 90” x 62” Height 68” Weight 2620 lbs. Preliminary Specifications- Subject to Verification Purchasing Information: There is a chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check and paypal 30 Day Return Privilege Policy: Returns are accepted on this item within 30 days of shipment Buyer pays the return shipping costs to our facility Machine must be returned in the condition it was received Money back refund provided Freight and Shipping: The machine is located in Alto. Michigan(49302) There is no charge to load onto buyer's truck Shipping costs to buyer location are not included with the machine price We can provide a freight quotation. Buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required. We quote crating or palletizin
|
|
#URB-550A KIKINDA 11.8" x 21.6" Hydraulic Surface Grinder (New 1988)
Preowned 11.8" x 21.6" KIKINDA Hydraulic Surface Grinder With Automatic Incremental Downfeed. Model: URB-550A, S/N 6287(New 1988) Kikinda grinding machines were built in the former Yugoslavia. Parts and service for Kikinda grinders are supplied by: Mr. Laszlo Kovac LK Grinding Service 607 Middle Holland Road Holland. PA 18966(215) 932-4000 Work table area Maximum grinding length Maximum grinding width Maximum distance from centerline of spindle to top of work table Maximum longitudinal travel of table at maximum speed Maximum cross travel of work table Cross feed range Table speed range. Longitudinal Grinding wheel size Grinding wheel speed Downfeed handwheel graduated in increments to Fine downfeed adjustment in increments of Automatic incremental downfeed rate 11.8" x 34.6" 21.6" 11.8" 19.7" 22.4" ... more11.8" 08" to.800" 3.28 to 82 F.P.M. 11.8" diameter x 2" wide x 5" bore 1.500 R.P.M. 0004" 00008" 0002" to.0008" Equipped With Hydraulically acuated longitudinal table travel with manual movement accomplished by means of a handwheel engaging a pinion into a rack fixed to the table Electromechanically actuated cross feed Hardened and ground longitudinal and cross ways. One way on the cross feed ways is flat with the other being a"V" way. The longitudinal ways are both flat. Both sets of way hold caged ball bearings to give accurate and effortless movement. Wheelslide mounted in anti-friction needle bearings mounted in bearing cages Electromechanically actuated incremental downfeed of grinding wheelhead Automatic grinding cycle providing for coarse downfeed to the wheel followed by a fine downfeed and wheel sparkout. Wheelhead return at the end of the grinding cycle is operator controlled. Automatic depth stop. With dial indicator, which is actuated at the end of the sparkout cycle causing the downfeed to be disengaged. Depth stop setting automatically compensates for the amount removed from the wheel during the dressing o
|
|
WCI/Reid 6" x 18" 2-Axis Hydraulic Surface Grinder No. 618 HYD
WCI/Reid 6" x 18" 2-Axis Hydraulic Surface Grinder No. 618 HYD WCI/ Reid 2-Axis Hydraulic Surface Grinder Ref.46-565 Model No. 618 HYD Serial No. 21818 New 1980 Grinding Capacity: 6" x 18" Work Height. Wheel to Table: 15" Grinding Wheel Size: 7" Dia. x 1/2" Width Longitudinal Table Travel: 20" Cross Slide Travel: 7" Head Vertical Travel: 16" Longitudinal Table Feed Rates. Variable: 10- 125 FPM Overall Machine Dimensions: 55" x 46" x 68" High Equipped With: Bijur Automatic Lubrication 1 HP Direct Drive Spindle Motor Approximate Net Weight: 2.500 Lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept ... morePaypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
|
|
Chevalier Hydraulic Surface Grinder, Mdl. FSG-3A 1020, 10" x 20" Chuck, DRO,
Chevalier Hydraulic Surface Grinder Chevalier Hydraulic Surface Grinder Model FSG-3A 1020 10" x 20" fine line magnetic chuck Max. distance from table surface to spindle centerline: 22-7/8" Table speed. Infinitely variable: 16- 82 FPM. Wheel size: 12" x 1-1/4" wide x 3" bore. 2 axis DRO(digital read out) Over head wheel dresser. Coolant system. Instruction manual. Located in Bridgeport. CT 06607. This grinder is on consignment for a local customer. Inspect under power. Free loading. Great shipping rates.
|
|
Okamoto Hydraulic Surface Grinder 1224
1978 Okamoto Hydraulic Surface Grinder Specification Description Maximum Grinding Length, 24" Maximum Grinding Width, 12" Maximum Height Under 14" wheel, 13.7" Maximum Longitudinal Movement, 29.5" Maximum Cross MOvement, 13.6" Longitudinal Hyd Feed, 1-100 FPM, Vertical Movement of Wheelhead, Auto Feed/Table Stroke, 0.0001" 00015" Auto Feed/Saddle Stroke, 0.0001" 00015" Grinding Wheel, 12" X 1-1/2" X 5" Spindle Motor, 5 HP, Hydraulic Motor, 3 HP, Vert6ical Rapid Feed Motor, 0.5 HP, Dimensions, 74" X 103" X 74" H, Weight, 5.000 LBS Approx. Equipped With: Electro-magnetic chuck. Coolant If you have any question. Please contact Brayton Dennis at 253-830-4722 or email me at CapitalEquipmentInc@hotmail.com Shipping: Buyer is responsible for freight arrangements and ... morecosts All freight costs will be paid by the purchaser prior to pickup Large freight items usually ship within 5 days after all sales are final If needed. There will be a $125 loading fee for large freight items Small items are shipped via UPS. FedEx or USPS, Monday- Friday and will ship within 48 hours after funds have been approved. If you have any questions. Please contact me. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
DOALL Model D8-3 Hydraulic Surface Grinder, Serial No. 101-58148.
DOALL Model D8-3 Hydraulic Surface Grinder. Serial No. 101-58148. GENERAL SPECIFICATIONS: Chuck Size 8” x 24” Table Size 8-1/2” x 24” Grinding Wheel Size 12” x ¾” x 3” Work Height(table to wheel) 12-1/2” Table Travels 10” x 26” Longitudinal table speed 5– 75 FPM Wheel Surface Speed 6.000 FPM Vertical Wheel Adjustment.0001” Hand Cross Feed Increments.0002” Floor Space Required 65” x 106” Weight. Approx. 4200 lbs EQUIPPED WITH: 5 H.P. Spindle Motor– 1-1/2 H.P. Hydraulic Pump Motor– Incremental Downfeed Crush Grinding Table Cycle– Coolant System- 8” x 24” Electro Magnetic Chuck PRICE FOB HOPKINS. MINNESOTA 55343- SELLING AS INSPECTED-
|
|
1980 Brown & Sharpe 6" x 18" Hydraulic Surface Grinder Micromaster II, Warranty
1980 Brown& Sharpe Model 618 Micromaster Series II Surface Grinder Manufacturer: BROWN& SHARPE Product Condition: Run under power. Tested, ready to ship. Warranty Included Contact: sales@nemachinery.com Specifications: 1-Axis Longitudinal Hydraulic Feed Grinding Capacity: 6" x 18" Max. Grinding Wheel Size: 7" Dia. x 1/2" Max. Distance Spindle Center to Table Top: 19" 2 HP Cartridge Type Grinding Spindle 230/460/3/60 Equipped With: Fine Feed Dials for Cross& Down Feeds 6" x 18" Permanent Magnetic Chuck PAYMENT: Payments can be made by Bank Wire. Check, Paypal, Money Order or Cashier's Check. All payments must be received within 7 business days. We look forward to doing business with you. SHIPPING: Buyer can schedule pick up via TRUCK or we can schedule delivery for you and add the freight ... morecost. Buyer is responsible or assumes liability that machine gets properly tied down and shipped safely. Buyer can have equipment shipped anywhere Worldwide. Buyer is responsible for all arrangements and costs related to shipping. Any relevant duties. Customs, brokerage fees, taxes, and charges are the buyers responsibility. These charges may be collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. Available for pick-up on Monday to Friday during business hours and on Saturday if requested. Feel free to contact us if you have any questions or would like more information.
|
|
Thompson Model A Hydraulic Surface Grinder 6" x 18", X, Y Power Feeds, Warranty
Thompson Model A Surface Grinder 6" x 18" Manufacturer: THOMPSON Product Condition: Run under power. Tested, ready to ship. Warranty Included Contact: sales@nemachinery.com Specifications: Grinding Capacity: 6" X 18" Spindle Motor: HP. 1800 RPM Wheel Size: 12” x 5” x 1 1/2” Electrics: 220V/440Sharp Vertical Knee type Mill with Prototrak MX2 and Power Drawbar Table 10.25” x 51” R-8 spindle nose V 3 Ph. EQUIPPED WITH: X& Y Power feeds Front Splash Guard Needs 6” x 18” Perm. Magnetic Chuck PAYMENT: Payments can be made by Bank Wire. Check, Paypal, Money Order or Cashier's Check. All payments must be received within 7 business days. We look forward to doing business with you. SHIPPING: Buyer can schedule pick up via TRUCK or we can schedule delivery for you and add the freight cost. Buyer is responsible or assumes ... moreliability that machine gets properly tied down and shipped safely. Buyer can have equipment shipped anywhere Worldwide. Buyer is responsible for all arrangements and costs related to shipping. Any relevant duties. Customs, brokerage fees, taxes, and charges are the buyers responsibility. These charges may be collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. Available for pick-up on Monday to Friday during business hours and on Saturday if requested. Feel free to contact us if you have any questions or would like more information. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f9985fcc7-0xfe-
|
|
9471 12" x 24" Model GS1628CH Hydraulic Surface Grinder
Model GS-1625CH 12” x 24” Hydraulic Surface Grinder Serial# 40712-03 Asset# 9471 Specifications: Chuck Size 12” x 24” Table Size 15 3/4” x 33 1/2” 3 T-Slots 5/8” Grinding Wheel 14” Head Travel 16” Voltage 220/440 HZ 60 HP 5 Grinder is equipped with Magnetic Chuck control. Preliminary Specifications- Subject to Verification Purchasing Information: There is a chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check and paypal 30 Day Return Privilege Policy: Returns are accepted on this item within 30 days of shipment Buyer pays the return shipping costs to our facility Machine must be returned in the ... morecondition it was received Money back refund provided Freight and Shipping: The machine is located in Alto. Michigan(49302) There is no charge to load onto buyer's truck Shipping costs to buyer location are not included with the machine price We can provide a freight quotation. Buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required. We quote crating or palletizing seperately and it is not included with the sale price. We'll quote per customer requirements. Customer shipping method& machine design. We are a stocking dealer of new and used machine tools located in West Michigan and are members of the MDNA. We have over 1.000 different manual and CNC machines in stock for both fabrication and metal cutting applications. We are always looking to buy machinery– 1 piece or entire plants Please feel free to call or email us any questions at: Phone: 616-868-1111 Email: sales@vanderzielmachinery.com Vander Ziel Machinery Sales. Inc. 6325 Alden Nash, Alto, Michigan, 49302 Powered by The free listing tool. List your items fast and easy and manage your active item
|
|
8” x 24” Brown & Sharpe “Micromaster” Hydraulic Surface Grinder
Item#2554- 8” x 24” Brown& Sharpe“Micromaster” Hydraulic Surface Grinder Equipped With: 8" x 24" Walker Fine-Line Electro-Magnetic Chuck w/ Walker Variable-Power Control Coolant Pump and Piping/ Splash Guards Wheel Guard Machine Specifications: Working Surface of Table: 8" x 24" Table Travel– Longitudinal: 28" Table Speed: 10' 125' Min. Table Travel– Cross: 10" Crossfeed– Per Table Reversal: 0.010" 0.500" Reversal- Rapid Traverse: 75" Min. Maximum Distance Under New Wheel to Table: 13-1/2" Grinding Wheel Size: 14" x 2" x 5" Grinding Wheel Speed: 1760 RPM Grinding Wheel Motor: 3 HP 3/60 Overall Dimensions(Approx. 80" L-R x 77" F-B x 75" H Weight(Est. 5325 Lbs Shipping Point: IL Price: $6.950.00*SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling ... moreNOT Included Call On Target with all your equipment questions-203-441-4655
|
|
Surface Grinder Horizontal Hydraulic Okamoto Model ACC157DX (2006)
30" X 60" Okamoto Model ACC157DX Horizontal Hydraulic Surface Grinder(2006) Specifications and Equipment Working Surface: 59" X 27.5" Longitudinal Travel: 64" Cross Travel: 33" Vertical Travel: 19" Grinding Wheel Diameter: 15.7" Grinding Wheel Motor: 15 HP, Equipped with: DX Control. Coolant Filtration with Magnetic Separator, Oil Matic Temp Regulator, 30" x 60" Kanetec Electro-Magnetic Chuck Model KET-7075B, Over the Wheel Dresser, Heidenhain Digital Readout, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
|
|
OKAMOTO 12" x 24" fully automatic hydraulic surface grinder, Model ACCUGAR 124N
1- used) OKAMOTO Model ACCUGAR 124N. 12" x 24" fully automatic hydraulic surface grinder complete and in good running condition. General specifications are as follows: This machine is in metric configuration(dials) Maximum grinding capacity- 12" x 24" Height under 12" wheel- 13.7" Maximum workpiece weight- 930 lbs. Working surface of table- 23.75" x 11.8" Maximum longitudinal travel- 29.5" Maximum cross travel- 13.6" Rapid elevation to wheel head- 19 IPM. Maximum grinding wheel size- 12" x 5" x 1.5" bore. Grinding wheel speed- 1800 RPM. Grinding wheel drive motor- 5 HP. Hydraulic pump motor- 2 HP. Vertical traverse motor- 1/2 HP. Electrics- 230-460/3/60 AC(currently 460V) Floor space- 103" x 74" x 73"H. Machine weight. Approx. 5000 lbs. The machine is equipped ... morewith: 12" x 24" fine pole electro-magnetic chuck with controller. Manual over-the-wheel dresser, 2) wheel hubs, wheel balance stand and arbor, level pads, coolant system with separator, and owner's manual. The machine bears serial number 6831. New approximately 1982. We have had the machine checked out by our electrician and all functions are in very good working order. Our price includes bolting the machine to a skid for shipment via your flat bed truck. If crating is required. Please add $175.00. If you have any questions or wish to inspect this machine under power. Please call or email Jon Hebert. 704-825-1511,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1419df5e76a-0xee-
|
|
K.O. Lee Hydraulic Surface Grinder - Model SH818-2
K.O. Lee Hydraulic Surface Grinder- Model SH818-2 Chuck Size- 8" x 18" Has Coolant Hydraulic System Year- 2000 Magnetic Chuck is Missing Price is $4.500 Contact me for more pics or to dicker and deal. Everything sold as-is.
|
|
Hairg Super 618 Hydraulic Surface Grinder # 1898
FOB Hamilton. MI Click to view larger photo Specification Description Table Working Surface: 6" x 18" Max Chuck Size: 6" x 18" Max Table Movement(Manual) 19" Spindle Drive: 1-HP 208/230/460 Volt 3 Phase, Max Distance Wheel to Table: 12" Under 7" Wheel, Max Wheel Size: 7" x 1/2" x 1.25" Hole, Wheel Speed: 3450 RPM, Approx Size: 51"L x 41"W x 78"H, Approx Weight: 1000 Lbs, Equipped With: Magnetic Chuck Hydraulic Table Holland Equipment Hunters. Inc. 3345 60th St Hamilton. MI 49419 269-751-5169 269-751-7433:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-143e49b08e7-0xee-
|
|
DoAll Model D612-8 2 Axis Hydraulic Surface Grinder
Item#3252 DoAll Model D612-8 2 Axis Hydraulic Surface Grinder Equipped With: 6" x 24" Electro-Magnetic Chuck 1 Hp Spindle Motor 3/4 Hp Hydraulic Motor Currently Wired 220/3/60 Approximate Dimensions: 46" L-R x 50" F-B x 65" H. 2,700 Lbs Machine Specifications: Chuck Size: 6" x 24" Work Height Capacity: 12" Longitudinal Table Speed: 5-50 FPM Auto Traverse Feed Increments: 0-025" Hand Traverse Feed Increments: 0002" Vertical Wheel Head Adjustments: 0001" Grinding Wheel Size: 7" x 1/2" x 1-1/4" Spindle Drive: Direct Hydraulic Pump: 3 GPM Shipping Point: AL Price: $3.500.00 SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1440c68762b-0xd9-
|
|
Hydraulic Surface Grinder 3 Axis Favretto Model TB100
20" x 40" Favretto Model TB100 3 Axis Hydraulic Surface Grinder Specifications and Equipment Table working capacity: 55" x 19 11/16" Standard Grinding Wheel: 14" x 2" x 5" Longitudinal Movement of Table: 42 1/2" Max Width To Be Ground: 21 5/8" Maximum Wheel Head Cross Travel: 19 11/16" Height Ground. With Standard Wheel: 15 3/4" Table Speed(Inf Variable) 79- 1180 82 FPM, Grinding Wheel Speeds: 1450 RPM, Auto Step by Step Feed: 04- 4, Auto Dwonfeed: 0002- 002, Auto Continuous Cross Movement: 4- 236, Main Motor Drive: 8 HP, Current Electrical Arrangement: 220/3/60, Equipped with: 20" x 40" Electromagnetic Chuck with Neutrofier II. Over the Wheel Dresser, 3 Axis Incremental Downfeed, Coolant Filtration System* Video Available* Machine being sold As Is. Where Is. Buyer is responsible ... morefor shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scotttt@assetexchangeinc.com
|
|
DoALL AUTOMATIC HYDRAULIC POWERFEED 6" x 18" SURFACE GRINDER D6-1
DoALL AUTOMATIC HYDRAULIC POWERFEED 6" x 18" SURFACE GRINDER D6-1- DoALL AUTOMATIC HYDRAULIC POWERFEED 6" x 18" SURFACE GRINDER INVENTORY# 6105-E MODEL: D6-1 S/N: 39611083 MADE IN THE USA SPECIFICATIONS: WORKING SURFACE OF TABLE: 6" x 19 3/4" TABLE TRAVEL: 7 1/2" x 20" LONGITUDINAL TABLE SPEED: 5- 50 FPM GRINDING WHEEL: 7" x 1/2" x 1 1/4" SPINDLE MOTOR:1 HP/ 3450 RPM/ 220 V/ 3 PH/ 60 HYDRAULIC PUMP MOTOR: 3/4 HP/ 1725 RPM/ 230/460 V/ 2.6/1.3 FL HYDRAULIC PUMP: 3 GALLONS PER MINUTE EQUIPMENT INCLUDED: WALKER 6" x 18" ELECTRO-MAGNETIC CHUCK MICRO ADJUST OVER THE WHEEL PARALLEL DRESSER WALKER VARIABLE CHUCK CONTROL BIJUR LUBRICATION SYSTEM MECHANICAL SPECIFICATIONS: FLOOR SPACE: 45" x 81" APPROXIMATE) SHIPPING WEIGHT: 2.680 LBS(APPROXIMATE) THIS GRINDER NEEDS REPAIR AND ... moreIS BEING SOLD"AS-IS" FOB OUR BALTIMORE. MD WAREHOUSE SHOP MORE GRINDERS HERE! CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca St- Baltimore. Maryland 21224 Phone 800-394-4399- Fax 410-633-7737. RETURNS Returns will not be accepted without prior approval. If you need to make a return. Please contact us before you ship the merchandise back so we can issue you a Return Merchandise Authorization(RMA) number. All items are sold with the best intentions and most complete
|
|
DoALL 6" x 18" AUTOMATIC HYDRAULIC SURFACE GRINDER 618-7
DoALL 6" x 18" AUTOMATIC HYDRAULIC SURFACE GRINDER 618-7- DoALL 6" x 18" AUTOMATIC HYDRAULIC SURFACE GRINDER INVENTORY# 5936-E MODEL: 618-7 S/N: 219-67358 MADE IN THE USA READ THE DoALL 618-7 PDF HERE SPECIFICATIONS: WORKING SURFACE OF TABLE: 6" x 18" TABLE TRAVEL: 7 1/2" x 21 1/2" LONGITUDINAL TABLE FEEDS: 5- 125 FPM CROSS TABLE IN-FEEDS: 0- 250 IPM GRINDING WHEEL: 7" x 1/2" x 1 1/4" SPINDLE MOTOR: 1 HP/ 3400 RPM/ 440 V/ 3 PH HYDRAULIC PUMP: 6 GALLONS PER MINUTE EQUIPMENT INCLUDED: 6" x 18" ELECTRO-MAGNETIC CHUCK MICRO ADJUST OVER THE WHEEL PARALLEL DRESSER FLUX MASTER 5 VARIABLE CHUCK CONTROL PARALLEL DRESSER MECHANICAL SPECIFICATIONS: FLOOR SPACE: 90" x 55" APPROXIMATE) SHIPPING WEIGHT: 2.750 LBS(APPROXIMATE) THIS GRINDER NEEDS REPAIR AND IS BEING SOLD"AS-IS" ... moreSHOP MORE GRINDERS HERE! CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca St- Baltimore. Maryland 21224 Phone 800-394-4399- Fax 410-633-7737. RETURNS Returns will not be accepted without prior approval. If you need to make a return. Please contact us before you ship the merchandise back so we can issue you a Return Merchandise Authorization(RMA) number. All items are sold with the best intentions and most complete description available. PLEASE ASK QUESTIONS BEFORE BIDD
|
|
8" x 18" Chevalier Hydraulic Surface Grinder (#23978)
Reference#23978 8" x 18" Chevalier Hydraulic Surface Grinder Model: Smart-B818 Age: 2002 FEATURES: PC Based CNC Control Full Splash Enclosures Magnetic Chuck CAPACITY: Table Working Size. 8" x 18" Max. Grinding Length. 18" Max. Grinding Width. 8" Max. Distance(Table to Spindle) 15.74" Longitudinal Travel. 19.6" Longitudinal Travel. Manual. 20" Table Speed(Infinitely Variable) 0-55.77 FPM Table capacity. 462 lbs Cross Traverse Travel. 8.34" Cross Traverse. Rapids. 0-10 FPM Least Incremental Input. 0001" Vertical Travel. Rapids. 0-10 FPM Least Incremental Input. Vertical. 0001" Spindle Speed. 3450 RPM Spindle Motor. 2 HP Grinding Wheel Size. 8" x.5" x 1.25" Floor Space. 81" x 83" x 80" Machine Weight. 2602 lbs EQUIPPED WITH: PC Based CNC COntrol 8" ... morex 17.75" Magnetic Chuck NOTE: Inspect In Plant Under Power*Contact for Machine Location
|
|
MITEK Precision Hydraulic Surface Grinder w/ Electro Magnetic Chuck
Item#3413 MITEK Precision Hydraulic Surface Grinder w/ Electro Magnetic Chuck Equipped With: WORK LAMP 10 X 22 CHUCK OVER THE WHEEL DRESSER DUST COLLECTER MANUAL Machine Specifications Model MT-1022 AD Serial# P39338 New 1993 CAPACITY Working Surface of Table. 8" x 20" Longitudinal Travel. 22" Crossfeed Travel. 10" Table to Centerline of Spindle. 22" Grinding Wheel. 8" Dia. x 3/4" x 1 1/4" SPEED& FEED Spindle Speed. 3440 RPM Range of Table Feed. 10- 82 fpm Downfeed Handwheel(per Rev) 0.01" 0.2) per Gra) 0.0001" 0.002) Auto Downfeed Increment. Variable. 0.00025" 0.00005" Crossfeed Handwheel(per Rev) 0.2(4) per Gra) 0.001" 0.02) Auto Crossfeed Increment. 0.05" 0.75" Spindle Motor. 2 HP Hydraulic Motor. 1 HP Rapid Crossfeed Motor. 1/5 HP Rapid Downfeed Motor. 1/4 ... moreHP Coolant Pump Motor. 1/8 HP Dimensions. 84"H x 65"W x 65"L Weight. 2700 lbs. Electrics. 208-230 Volt Shipping Point: CT Price: $8.750.00 Subject to Verification Rigging and Hauling NOT included Please contact On Target for all your equipment questions 203-441-4655
|
|
10455 Harig 618 Hydraulic Surface Grinder, 6" x 18"
Harig 618 Hydraulic Surface Grinder Serial# 8554-H Asset# 10455 Specifications: Platen Work Height 6” x 18” Longitudinal Travel 20” Longitudinal Table Speed 3-70 fpm Cross Feed Travel 6 3/4” Vertical Working Height(under 7” Wheel) 11 3/4” Grinding Wheel 7” x 1/2” x 1 1/4” Grinding Handwheel Maximum Capacity 8”x1 1/4”x1 1/4” Elevating Handwheel Graduation.0001” Cross Feed Handwheel Graduation.001 Spindle Motor 1 1/2 HP Spindle Speed 3450 RPM Floor Area 40” x 31” Operating Space 72” x 45” Weight 1.360 lbs. Grinder is equipped with an Acu-Rite 2 Axis DRO. Preliminary Specifications- Subject to Verification Purchasing Information: There is a chance that this item may sell locally at our facility before we take it down from Ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared ... morefunds are required prior to shipment Payment methods include wire transfer. Certified check and PayPal 30 Day Return Privilege Policy: Returns are accepted on this item within 30 days of shipment Buyer pays the return shipping costs to our facility Machine must be returned in the condition it was received Money back refund provided Freight and Shipping: The machine is located in Alto. Michigan(49302) There is no charge to load onto buyer's truck Shipping costs to buyer location are not included with the machine price We can provide a freight quotation. Buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required. We quote crating or palletizing separately and it is not included with the sale price. We'll quote per customer requirements. Customer shipping method& machine design. We are a stocking dealer of new and used machine tools located in West Michigan and are members of the MDNA. We have over 1.000 different manual and CNC machines in stock for both fabrication and metal cutting applications. We are always looking to buy machinery– 1 piece or enti
|
|
Hydraulic Surface Grinder 3 Axis16" x 32" Okamoto Model PSG-84AN 1632N (1987)
16" x 32" Okamoto Model PSG-84AN 1632N 3 Axis Hydraulic Surface Grinder(1987) Specifications and Equipment Maximum Grinding Length: 32" Maximum Grinding Width: 16" Max. Distance Under 14" Dia. Wheel: 20.5" Surface Length of table: 33.5" Surface Width of table: 14.25" Maximum Longitudinal Movement: 37.4" Maximum Cross Movement: 16.9" Hydraulic Feed: Up To 100 FPM, Automatic Feed Per Table Stroke: 000015" 0011" Equipped With: 16" x 32" Electromagnetic Chuck with Neutrofier Over the Wheel Dresser. 3 Axis Incremental Downfeed, Coolant Filtration System with Magnetic Separation, Machine being sold As Is. Buyer is responsible for shipping. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-145d76308af-0x113-
|
|
Surface Grinder Reciprocating Hydraulic Danobat Model RT4000
40" x 160" Danobat Model RT4000 Hydraulic Recip. Surface Grinder Specifications and Equipment Maximum Grinding Width: 39" Maximum Grinding Height: 39" Maximum Grinding Length: 158" Table Feed Range: 39 to 975 in/min, Main Grinding Wheel Diameter: 19" x 12" x 2.5" Wheel Head Intermittent Cross Feed Range: 0.020 to 1.125 in. Automatic Adjustable Vertical Feed: 0.0001 to 0.0099 in. Main Motor Drive: 20 HP. 1500 RPM, Current Electrical Arrangement: 440 Volts. 60 Cycle/ 3 Phase, Equipped With: Includes Refrigerated Coolant System with Filtration. The machine is in like new condition under power and ready for inspection. Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any other questions please contact Scott Tyler in our office at(773) 290-1825 or email: scottt@assetexchangeinc.com
|
|
20” X 48” Okamoto DX Column Type Precision Hydraulic Surface Grinder
Item#2825 20” X 48” Okamoto DX Column Type Precision Hydraulic Surface Grinder Equipped With: Overhead Wheel Dresser, 20" x 48" Electric Magnetic Chuck, Neutrifier and Rectifier Machine Specifications: Chuck Size 20" x 48" Max. Grinding Length 48" Max. Grinding Width 20" Max. Distance Under Wheel 23.5" Max. Table Load Capacity 1.950 Lbs. Grinding Wheel Size 20" x 3" x 8" Approximate Dimensions 213" S-R x 100" F-B x 86" High Approximate Weight 16.540 Lbs. Shipping Point: Midwest Price: $69.500.00*SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655
|
|
12” X 24” Okamoto Hydraulic Horizontal Spindle Surface Grinder
Item#2402- 12” X 24” Okamoto Hydraulic Horizontal Spindle Surface Grinder Equipped With: Chuck Controls Automatic Incremental Power Down Feed Automatic Grinding Cycle- Power Head Elevation Automatic Cross Feed Reversal Plunge Grinding Capabilities Machine Specifications: Model 124 Series"ACCUGAR" Table Working Surface. W x L. 10.813" x 23.75" Grinding Width Capacity. Maximum. 12" Grinding Length Capacity. Maximum. 24" Height Under 12" Grinding Wheel. 13.5" Table Longitudinal Travel. 27.75" Table Cross Travel. 12" Table Longitudinal Feeds. Range. 1 to 100 FPM Table Cross In-Feeds. Range. 04 to.4 IPR Spindle Vertical Feeds. Range. 0001 to.0005 IPR Power Rapid Vertical Traverse. 14 IPM Grinding Wheel Spindle Motor. 5 HP/1730 RPM Hydraulic System Motor. 1 HP Power Elevation Motor. 1/4 HP Electrical ... moreSystem. 230-460/3/60 Floor Space Required. L x D. 99" x 67" Overall Height. 83" Weight. Approximately. 4900 LBS New 1978 Shipping Point: OH Price: $8.200.00*SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling NOT Included Call On Target with all your equipment questions-203-441-4655 ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-146d74f3436-0x10c-
|
|
#2A20 MILLPORT HYDRAULIC-FEED HORIZONTAL- SPINDL;E SURFACE GRINDER
8" x 18" MILLPORT HYDRAULIC-FEED#27145 HORIZONTAL-SPINDLE SURFACE GRINDER Model 2A20. EQUIPPED WITH: Hydraulic Table And Saddle Movement 8" x 18" Kanetsu Permanent-Magnetic Chuck CATALOGUE SPECIFICATIONS: Table Working Surface. W x L. 8" x 18" Grinding Width Capacity. Maximum. 8" Grinding Length Capacity. Maximum. 18" Height Under 7" Grinding Wheel. 13.375" Table Longitudinal Travel. 21" Table Cross Travel. 9" Grinding Wheel Diameter. Standard. 7" Grinding Wheel Width. Maximum. 1" Grinding Wheel Width. Standard. 0.5" Grinding Wheel Hole Diameter. 1.25" Table Longitudinal Feeds. Range. 0 to 70 FPM Table Cross In-Feeds. Range. 0 to.375 IPM Grinding Wheel Spindle Motor. 1.5 HP Hydraulic Pump Motor. 2 HP Electrical System. 220-440/3/60 Floor Space Required. L x D. ... more6' x 4'2" Overall Height. 5'10" PRICE: F.O.B. OUR WAREHOUSE. $3.450.00. ALL MACHINE/EQUIPMENT ARE SUBJECT TO PRIOR SELL. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-147e957cb79-0x10c-
|
|
JONES & SHIPMAN 8" x 24" AUTOMATIC HYDRAULIC SURFACE GRINDER - KANETSU CHUCK
Made in the U.S.A. by Jones& Shipman. This is a used Automatic Hydraulic Surface Grinder in EXCELLENT condition. Features: Incremental Downfeed. Automatic Hydraulic Operation. Coolant System. Kanetsu 8" x 24" Electromagnetic Chuck. Specifications: Table Surface Area: 37-1/2" x 10" X-Axis Travel: 30" approx. Y-Axis Travel: 12" approx. Z-Axis Travel: 16" approx. Wheel Diameter: 10" Wheel Head Motor: 3 Horsepower. 1,420 rpm. Electrical: 380/ 440 Volt. Three Phase. Overall Dimensions: 81" x 55" x 85" tall. Comes as shown in pictures. Buyer is responsible for scheduling pickup of item. And all shipping costs for this unit. Weight of item is approx. 5.000 lbs.
|
|
Norton 10" Hydraulic Surface Grinder, Operating and Service Manual 1952
I have Thousands of Manuals for Metal Working. Wood Working and Fabrication Machining. Please just ask if you are looking for a hard to find Manual. It would be a pleasure to get your Machine Up and Running Again through this Invaluable Information. This item will be sent to you refurbished like new. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy. I’ve collected Vintage Manuals for a few years. I’ve read Parts of these Programming and Operations Manuals. There are So Many Possibilities. Use the information in these manuals for Operations. Operate, Program, Maintenance, Parts Lists, Examinary Training, Motion Picture for Vintage Images, Instructions, Schematics, Wiring Diagrams, Assemblies, Methods and Ideas of Machining. Please View the Following information. Pictures of the Machine Says A Thousand ... moreWords. I will search for your specific Needs Continually. I will allow you to return any information that is of No use to you. Machine Obsolescence! Norton 10" Hydraulic Surface Grinder Erecting. Operating and Servicing Manual Yer(1952) This Manual Covers Models: 10" 768-6 This Manual Includes: Specifications Uncrating. Erecting and Starting Machine Operation Servicing Index of Photographs to have quality copies Index of Drawings This Manual Has 32 Printed Pages. Year 1952 All Manuals come Spiral Bound. Transparent Plastic Front and Back Cover.Most Products are Shipped the next day. After Much Consideration. ALL INTERNATIONAL SALES Will Be a Computer Generated.pdf E-Mail. Normal 0 false false false EN-US JA X-NONE:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14b0938ab9e-0x103-
|
|
Kent 12'' x 24'' Hydraulic Surface Grinder
USED Kent Surface Grinder for sale from precision machine shop. We purchased the machine brand new in 1997 and have used it in our one-shift machine shop grinding mild steel. Tool steel(O-1, A-2, D-2) 4140, and some aluminum. The grinder is being sold along with the hydraulic power unit and the coolant tank with pump. We took the machine out of commission this summer when we purchased a larger surface grinder, and now we no longer have the floor space to store it. When the grinder was taken off-line in July 2014 it did operate. As you can see from the photos, there is wear on the grinder. And it is being sold as-is, without any warranty and no return privilege. Kent 12 x 24' Surface Grinder with Kanetsu magnetic chuck* Hydraulic power unit* Coolant tank with pump* Acu-Rite Qwikcount digital read-out(DRO) Serial number 759039* Year of ... moremanufacture: 1997 LOADING: We will load the machine without additional cost using our fork-truck and/or overhead crane. You are responsible for the rigging of the machine on the freight truck. DELIVERY/TRANSPORTATION: The Buyer is responsible for all delivery and transportation costs. PAYMENT: We will accept Mastercard and Visa credit cards or check. If payment is by check, the check must clear our bank before the machine can be released from our facility. QUESTIONS: Please call Kent at 517-750-1332 to request additional photos or to ask about machine features.
|
|
10936 Kent Model KGS-510AHD 20” x 40” Hydraulic Surface Grinder
Kent Model KGS-510AHD 20” x 40” Hydraulic Surface Grinder Serial# 880459-1 Asset# 10936 Specifications: Overall Working Area 40” x 20” Longitudinal Table Travel 44 7/8” Cross Feed Column Travel 21 1/4” Distance Spindle Center to Table 23 1/4” Table Load including Magnetic Chuck 2200 lbs. T-Slot 3. 5/8” Longitudinal Table Speed 15-85 ft/min Cross Feed on Hand Wheel 0.004” per Grad Cross Feed on Hand Wheel 0.2” per Rev Auto Cross Feed per Stroke 0.02~0.47” Rapid Cross Feed 59” Grinding Wheel 14” x 1-1/2” x 5” Spindle Speed 1740 RPM Vertical Movement on Hand Wheel 0.0001” per grad Vertical Movement on Hand Wheel 0.02” per Rev Auto Down Feed Increment 0.0002~0.0016 Rapid Elevating 11”min Height 94” Floor Space 175” x 86” Weight 13.500 lbs. Preliminary Specifications- Subject to Verification Purchasing Information: There is a chance that this ... moreitem may sell locally at our facility before we take it down from Ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are required prior to shipment Payment methods include wire transfer. Certified check and PayPal 30 Day Return Privilege Policy: Returns are accepted on this item within 30 days of shipment Buyer pays the return shipping costs to our facility Machine must be returned in the condition it was received Money back refund provided Freight and Shipping: The machine is located in Alto. Michigan(49302) There is no charge to load onto buyer's truck Shipping costs to buyer location are not included with the machine price We can provide a freight quotation. Buyer works directly with the shipper Crating/Palletizing: Some buyer's need to use a freight company requiring the item to be crated or palletized. If this is required. We quote crating or palletizing separately and it is not included with the sale price. We'll quote per customer requirements. Customer shipping method& machine design. We are a stocking dealer of new and used machine tools located in West Michigan and are memb
|
|
CHEVALIER FSG-2A818 2-AXES HYDRAULIC 8" x 18" SURFACE GRINDER. LOADED. DRO, HUBS
Chevalier FSG-2A818 Hydraulic Surface Grinder Description: In fantastic condition both working& cosmetically. Loaded with features including a single axis Anilam DRO. Dual axes hydraulic traverse w/ auto reverse, variable speed stroke and more. Includes loads of grinding wheels& extra hubs. This machine was well taken care of. Back by our 30-day return privelege. Check out our feedback& bid with confidence! Below is a short video of the machine under power: Chevalier FSG-2A818 2-Axes Hydraulic Surface Grinder Manufacturer: Chevalier Model: FSG-2A818 S/N: M883C084 Year: 1988 Specifications: Max. grinding capacity 8"x18" Max. longitudinal table travel. Hydraulic 19-3/4" Max. longitudinal table travel. Manual 21" Max. crossfeed travel. Automatic 9" Max. crossfeed travel. Manual 9-1/2" Dist. from spindle ... morecenter to table 18" Variable table speed. Hydraulic 16' to 82' FPM Automatic crossfeed increment 0.02" to 0.4" Power rapid cross traverse rate 48" IPM Crossfeed handwheel. Per graduation 0.001" Per revolution 0.2" Microfeed. Per revolution 0.005" Per graduation 0.00005" Power rapid traverse rate. Vertical 13" IPM Spindle motor 2 HP Standard grinding wheel 8" dia. Approx. weight 2.730 lbs Approx. floor space required 83"x61"x75"H Equipped With: Hydraulic Table Traverse 1-Axes(Y) Anilam Digital Readout Power crossfeed Power rapid wheelhead positioning All slideways are laminated with Turcite-B and precisely hand-scraped for accuracy Fine feed knob for vertial axes(0001" grad) 8"x18" O.S. Walker"Ceramax" fine division Electromagnetic chuck Coolant system Spare grinding wheel hubs Spare grinding wheels Footpads Worklight The above information is to the best of our knowledge from sources deemed reliable. But should be verified at the time of inspection to confirm accuracy. Quoted prices do not include applicable sale taxes or freight costs. Email us with any technical questions you ma
|
|

|