|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Chicago, United States HAAS TM-1 CNC TOOL ROOM MILL VMC VERTICAL MACHINING CENTER Specification TABLE SIZE: 47.5"x10.5" X-AXIS TRAVEL: 30" Y-AXIS TRAVEL: 12" ... moreZ-AXIS TRAVEL: 16" RAPID TRAVERSE RATE X. Y: 200 IPM RAPID TRAVERSE RATE Z: 200 IPM SPINDLE TAPER: CAT 40 SPINDLE SPEEDS: 6000 RPM SPINDLE DRIVE MOTOR: 7.5 HP MAXIMUM TOOL DIAMETER: 3.5" MAXIMUM TOOL WEIGHT: 12 Lbs. FLOOR SPACE REQUIRED: LxWxH) 85"x64" MACHINE DIMENSIONS: APPROX. 85"x64" NET WEIGHT: APPROX. 3300 LBS Auctions over $500.00 must pay by wire transfer within 48 business hours from auction close. Payment must be received by our bank within 72 business hours after auction closes. If payment terms are not met. Item will be re-listed or offered to the under bidder without further notice. This machine has been serviced regularly& well maintained and ready to go to work for you! You can email me with any questions& thanks for looking at my auction!
Buy It Now
Condition: Used Location: Coloma, United States MAZAK VTC-16A CNC VERTICAL TRAVELING COLUMN MILL 1997 M-Plus UNDER POWER.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Model Number: CHIPMASTER 2. Manufacturer: SOUTH BEND LATHE. See details below. Larger pallet sizes cost more. Capacity: 50" X 10". Here is a quick summary ... moreUnless noted, item has not been tested, and condition is unknown.
Buy It Now
Condition: For parts or not working Location: Fort Worth, United States Inventory Number: 11231470002. Capacity: 39x19. Model Number: VMC 760. Manufacturer: BRIDGEPORT. Diversion of any products contrary to United States law ... moreis prohibited. (c) Truckload and Partial Truckload: HGR can assist you in setting up truckloads or partial truckload loads (flat bed, step deck, double drop, etc.).
Buy It Now
Condition: For parts or not working Location: Euclid, United States Manufacturer: BRIDGEPORT. See details below. Larger pallet sizes cost more. Unless noted, item has not been tested, and condition is unknown. Diversion ... moreof any products contrary to United States law is prohibited.
Buy It Now
Condition: Used Location: Dayton, United States Spindle Nose to Table Surface, min max - 4.8", 28.9". Cutting Feed Rates - 200 ipm. Spindle Center to Column - 23.6". Max Table Load - 1320 lbs. Table ... moreSurface to Floor - 33". Weight, Approx - 9460 Lbs.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Manufacturer: ACER. See details below. Larger pallet sizes cost more. Unless noted, item has not been tested, and condition is unknown. Diversion of any ... moreproducts contrary to United States law is prohibited.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Manufacturer: LAGUN. See details below. Larger pallet sizes cost more. Capacity: 11" X 58". Unless noted, item has not been tested, and condition is unknown. ... moreDiversion of any products contrary to United States law is prohibited.
Buy It Now
Condition: Used Location: Toledo, United States SPINDLE CENTER TO COLUMN DISTANCE. 14.8". SPINDLE DRIVE. . 7.5 HP. TABLE LOAD. . MACHINE TRAVELS (X/Y). 30" X 15". SPINDLE TO TABLE DISTANCE.
Buy It Now
Condition: Used Location: Dayton, United States Must transport on air ride flatbed truck or trailer. Table Size - 10" x 50".
Buy It Now
Condition: Used Location: Bradenton, United States Model: HAAS VF-2D (2004). HAAS VF-2D CNC Vertical Machining Center 20 H.P. 2005’ Prewired 4th # GMT-3668 Reference # GMT-3668 Model # VF-2D Serial # 39093 ... moreYear of manufacture- 12/2004’ Table working surface- 14” x 36” Table travel, X-axis (longitudinal)- 30” Table travel, Y-axis (cross)- 16’’ Vertical column travel (Z-axis)- 20’’ Minimum/Maximum distance, spindle nose to table- 4’’/24’’ Spindle taper- CAT-40 Spindle speeds- 0 – 7500 R.P.M. Maximum weight on table- 3,000 Lbs.
Buy It Now
Condition: Used Location: Des Plaines, United States Main title: Milltronics VM-24 (1997).
Buy It Now
Condition: Used Location: Novi, United States Tool Changer Capacity 30.
Buy It Now
Condition: Used Location: Holland, United States We work with you to find the right industrial machine tools, and provide services to help you with financing machines, liquidation, appraisals, and more. ... moreHelpful Links. Item sold subject to prior sale.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description: This Is a High Quality Turret Vertical Milling Machine Water Pipe, This Bendable Metal Pipe Is Made Of Steel, Which Is Not Easy To ... moreRust And Durable. Features: Color: Silver Length: 700mm Thread: 3/8" Material: Steel Packing Size: 23*16*3cm Gross Weight: 0.6kg Net Weight: 0.4kg The Package Includes: 1X Milling Machine Water Pipe.
Buy It Now
Condition: Used Location: Noblesville, United States BRIDGEPORT EXPLORER CNC VERTICAL MILL WITH TOOLINGUnit will need to be picked up. Needs power supply.
Buy It Now
Condition: For parts or not working Location: Watertown, United States Inventory Number: 01240710001. Manufacturer: HURCO. Capacity: 25 KVA. Model Number: 4020 HT. Unless noted, item has not been tested, and condition is ... moreunknown. We reserve the right to cancel any order.
Buy It Now
Condition: Used Location: Woodruff, United States MITSUBISHI, M-V5B, CNC VERTICAL MACHINING CENTER. Electric Foot Switch: No. RPM: 80 - 8,000. TABLE SIZE 20.1" x 39.4" MAX TABLE LOAD 1,100 LBS MOTOR 10 ... moreHP SPINDLE. Horse Power: 10. Number of Axis: 3. Specifications: X AXIS TRAVEL 31.5" Y AXIS TRAVEL 20.1" Z AXIS TRAVEL 18.1".
Buy It Now
Condition: Used Location: Holland, United States YODER MACHINERY SALES. MODEL. . 1350. MILL POWER. We load for free. HEAD TRAVEL. May inspect under power. SPINDLE MOTOR. . 5 HORSEPOWER.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Manufacturer: BRIDGEPORT. Serial Number: 24220886C. See details below. Larger pallet sizes cost more. Model Number: SERIES 1. Unless noted, item has not ... morebeen tested, and condition is unknown. Diversion of any products contrary to United States law is prohibited.
Buy It Now
$37.70 Shipping Condition: New Location: Union Grove, United States NOTE: Part is SPINDLE SHAFT ONLY. From original factory in Czech Republic. Replace your old worn-out spindles with one of these!
Buy It Now
Condition: For parts or not working Location: Euclid, United States Manufacturer: FADAL. Capacity: 16" X 38". Unless noted, item has not been tested, and condition is unknown. We reserve the right to cancel any order. ... morePrices are subject to change. Handling Policy. Diversion of any products contrary to United States law is prohibited.
Buy It Now
Condition: Used Location: Dayton, United States FEED RATES -. 1 TO 200 IPM. MACHINE WEIGHT, APPROX - 6000 LBS. EQUIPPED WITH SPINDLE MOTOR - 5 HP. TABLE CAPACITY - 2500 LBS. ELECTRICS - 3/60/230 V. ... moreTRAVELS (X Y Z) - 38” X 20” X 24”. SPINDLE SPEEDS - 60 TO 3600 RPM.
Buy It Now
Condition: Used Location: Lincolnshire, United States Milling Capacity - Mild Steel.2 CI/Min. - Z-Axis - Knee. Serial No. 12/BR 237411. - Spindle Nose to Gauge Line.2.5" - 18.25". If not, we reserve. Catalog ... morespecifications, subject to verification.
Buy It Now
Condition: Used Location: Dayton, United States 40 Taper Spindle. Table size 58" x 16". 50" x 20" Travels. Umbrella Style Automatic Tool Changer. Net weight, approx 7606 Lbs.
Buy It Now
Condition: Used Location: Los Angeles, United States 10" x 54" Used Acra 3 Axis CNC Vertical Milling Machine Heavy Duty With AC Pro Drive Inverter Head "Bridgeport Copy" (Dealer Warranty), Mdl. Our vast ... morewarehouses contains over 1,500 pieces of New and Used machines available for inspection in person, or live via internet webcam fed directly to your computer's browser.
Buy It Now
Condition: Used Location: Bradenton, United States Model: HAAS VF-2B (2002). HAAS VF-2B CNC Vertical Machining Center 20 H.P. 2002’ Prewired 4th # GMT-3660 Reference # GMT-3660 Model # VF-2B Serial # 29452 ... moreYear of manufacture- 8/2002’ Table working surface- 14” x 36” Table travel, X-axis (longitudinal)- 30” Table travel, Y-axis (cross)- 16’’ Vertical column travel (Z-axis)- 20’’ Minimum/Maximum distance, spindle nose to table- 4’’/24’’ Spindle taper- CAT-40 Spindle speeds- 0 – 7500 R.P.M. Maximum weight on table- 3,000 Lbs.
Buy It Now
Condition: Used Location: Holland, United States MODEL. . 4VK. YODER MACHINERY SALES. POWER DRAW BAR. . YES. Performs as expected. May inspect under power. 1 SHOT LUBE. . MMS LUBE SYSTEM. SERIES 1100.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description: This Is a High Quality Turret Vertical Milling Machine Water Pipe, This Bendable Metal Pipe Is Made Of Steel, Which Is Not Easy To ... moreRust And Durable. Features: Color: Silver Length: 700mm Thread: 3/8" Material: Steel Packing Size: 23*16*3cm Gross Weight: 0.6kg Net Weight: 0.4kg The Package Includes: 1X Milling Machine Water Pipe.
Buy It Now
Condition: Used Location: Holland, United States We work with you to find the right industrial machine tools, and provide services to help you with financing machines, liquidation, appraisals, and more. ... moreTorrington 12/4 Arbor Slitting Line. Torrington 2-5/8 Arbor Slitting Line.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Features: Color: Silver Length: 700mm Thread: 3/8" Material: Steel Packing Size: 23*16*3cm Gross Weight: 0.6kg Net Weight: 0.4kg The Package Includes: ... more1X Milling Machine Water Pipe.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description: This Is a High Quality Turret Vertical Milling Machine Water Pipe, This Bendable Metal Pipe Is Made Of Steel, Which Is Not Easy To ... moreRust And Durable. Features: Color: Silver Length: 700mm Thread: 3/8" Material: Steel Packing Size: 23*16*3cm Gross Weight: 0.6kg Net Weight: 0.4kg The Package Includes: 1X Milling Machine Water Pipe.
Buy It Now
Condition: Used Location: Louisville, United States Model VMC 3417 S/N 09043. Taper BT 40. Power 10 HP.
Buy It Now
Condition: Used Location: Lincolnshire, United States Tool Clamping Force. 40 Station (Chain Style) Automatic Tool Changer. High Speed Plus Drive Swivel Head (B-Axis). Swivel Vise (C-Axis) rotates to hold ... morebar, then part-off. Has 360 deg. Table Left to Right (V-Axis) runs parallel to X-Axis.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description: This Is a High Quality Turret Vertical Milling Machine Water Pipe, This Bendable Metal Pipe Is Made Of Steel, Which Is Not Easy To ... moreRust And Durable. Features: Color: Silver Length: 700mm Thread: 3/8" Material: Steel Packing Size: 23*16*3cm Gross Weight: 0.6kg Net Weight: 0.4kg The Package Includes: 1X Milling Machine Water Pipe.
Buy It Now
Condition: Used Location: Toledo, United States MODEL. . TRAK DPM. TRAK A.G.E. 3 AXIS CNC. SPINDLE CENTER TO COLUMN FACE. 19". SPINDLE DRIVE. . 3 HP. POWER DRAW BAR. . YES. GLASS SCALES. .
Buy It Now
Condition: Used Location: Holland, United States YODER #67709. YODER MACHINERY SALES. VERTICAL KNEE TRAVEL. . LONGITUDINAL POWER FEED. . YES. CROSS POWER FEED. . May inspect under power. HEAD SWIVELS, ... moreLEFT/RIGHT. 90 DEGREE EITHER WAY.
Buy It Now
$124.53 Shipping Condition: Used Location: Piasa, United States BOXED ITEM YUASA PRODEX CPDX-4 4TH AXIS 5C collet indexing Yuasa Type CPNC-100 Controller tail stock tested working video available call 773-392-5055. ... moreCopy of users manual info here: Paypal. Cash, checks, mo Shipping paid by buyer. See calculator or flat rate for price. Local pick ups are fine. Item must be paid on time and removed with in ten days from payment or storage fees will apply. Domestic handling time Will usually ship within 5 business days of receiving cleared payment. Shipping insurance Optional(based on location and shipping service) Sales tax Seller charges sales tax for items shipped to: IL(8.750% Bidders please read all terms. By placing a bid you confirm and agree to all auction policies. No international shipping. This includes Canada. Buyers pay for shipping Any Flat rate shipping price listed is to the lower 48 states only. I will combine shipping costs on multiple purchases. Winner must make contact within 3 days of auction end. Payment is due within 7 days of auction end. This means Received not sent. You are welcome and encouraged to view items in person. I describe items to best of my ability. I try to provide good pictures for your consideration. I am not an expert on all of my items so please ask questions before bidding. All items are sold"AS- IS. Where- IS" and with no refunds or returns. Items are described to the best of our knowledge, however, We and/or the Seller make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. See are high positive feedback rating and bid with confidence. I always return feedback so leave some good comments so I can do the same for you. Please see my other auctions. You never know what bargains you will find! Welcome to another auction by Best Bay Machinery Sales. We specialize in offering high quality new and used metalworking equipment for machining and fabricating at affordable prices. Check out our store for the best dea
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description: This Is a High Quality Turret Vertical Milling Machine Water Pipe, This Bendable Metal Pipe Is Made Of Steel, Which Is Not Easy To ... moreRust And Durable. Features: Color: Silver Length: 700mm Thread: 3/8" Material: Steel Packing Size: 23*16*3cm Gross Weight: 0.6kg Net Weight: 0.4kg The Package Includes: 1X Milling Machine Water Pipe.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description: This Is a High Quality Turret Vertical Milling Machine Water Pipe, This Bendable Metal Pipe Is Made Of Steel, Which Is Not Easy To ... moreRust And Durable. Features: Color: Silver Length: 700mm Thread: 3/8" Material: Steel Packing Size: 23*16*3cm Gross Weight: 0.6kg Net Weight: 0.4kg The Package Includes: 1X Milling Machine Water Pipe.
Buy It Now
Condition: Used Location: Guilford, United States We have them in paper and disc. model: KIRA VTC-30E (1998).
Buy It Now
Condition: Used Location: Sunnyvale, United States 2004 FADAL VMC-6030HT, 10,000 RPM, 22-1/2 HP, 60X30X30. 2004 FADAL VMC-6030HT. Manufacturer: Fadal. Model: VMC 6030. 10,000 RPM, 22-1/2 HP, 32 ATC. Year ... moreof Manufacture: 2004. X axis : 60". Y axis : 30".
Buy It Now
Condition: For parts or not working Location: Euclid, United States Manufacturer: COMPUMILL. Model Number: 3000. See details below. Larger pallet sizes cost more. Unless noted, item has not been tested, and condition is ... moreunknown. Diversion of any products contrary to United States law is prohibited.
Buy It Now
Condition: Used Location: Stone Mountain, United States 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. Maximum Load Size: 48″ W x 48″ L x ... more80″ H. We also reserve the right to correct any stenographic errors.
Buy It Now
$22.58 Shipping Condition: Used Location: Middlebury, United States Model VF-3 CNC Vertical Mill S/N 2260 MFG. 7/93 208-230V 3Ph. Will there be a dock or forklift. Size: Length: 10 in. Width: 12 in. Height: 8 in. Prefer ... moreto pick it up yourself?. Need it urgently?.
Buy It Now
Condition: Used Location: Stone Mountain, United States Iowa Precision UE20M48 20,000 LB. Capacity Coil Upender. Model: UE20M48. 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills ... moreBroaches Chemical & Processing Equip. We also reserve the right to correct any stenographic errors.
Buy It Now
Condition: Used Location: Los Angeles, United States 20" x 16" x 20" Used FADAL CNC Vertical Machining Center, Mdl. We also carry a wide variety of tooling at competitive prices. LOCAL PICKUP IS FREE, LOADING ... moreONTO A FLATBED OPEN TRUCK OR BOX VAN. NO CONTAINERS!
Buy It Now
Condition: Used Location: Toledo, United States Max Table Load, Centrally Located: 990 Lbs. Electrical: 230V/3PH. Rapid Traverse Rate: 200 ipm. Programmable Feedrate Range: 0.1 to 200 ipm. Spindle Taper: ... more#30 Quick Change. Spindle Motor: 2.
Buy It Now
Condition: Used Location: Guilford, United States Model: KITAMURA Mycenter 4XiF (2004). Mycenter 4XiF. • Rapid Traverse Rates (X & Y / Z) = 1969 / 1417 IPM • Spindle Motor = 25 HP AC • Spindle Nose to ... moreTable Top = 6.9" - 27" • Spindle Speed =20,000 RPM • Spindle Taper = CAT 40 • Table Load Capacity =1320 lbs.
Buy It Now
Condition: Used Location: Stone Mountain, United States Model: NC400. 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. X Axis Travel: 137.8″. ... moreCNC Vertical Machining Centers. CNC Lathes. Y Axis Travel: 78.75″.
Buy It Now
Condition: Used Location: Fullerton, United States Coolant Capacity 40 Gallons. Financing Available / Se Habla Español. Fullerton, Ca 92831. 2424 Cypress Way. ACT Machinery. All specifications and locations ... moreare subject to change without notice. Spindle HP 15.
Buy It Now
Condition: Used Location: Los Angeles, United States 9" X 49" Used Southwestern Industries 3 Axis CNC Vertical Milling Machine Bed Mill (Large Table for Heavy Duty Work), Mdl. DPMSX2, Joystick, Floppy Disc ... moreDrive, Auto Lube, 3 Axis Digital Readout, Prototrak SMX 3 Axis CNC Year 2019, #A6985.
Buy It Now
Condition: Used Location: Los Angeles, United States 30" X 30" X 60" Used FADAL CNC Vertical Machining Center (Great Condition), Mdl. Vertical (Z Axis)30". We also carry a wide variety of tooling at competitive ... moreprices. LOCAL PICKUP IS FREE, LOADING ONTO A FLATBED OPEN TRUCK OR BOX VAN.
Buy It Now
Condition: Used Location: Lancaster, United States Speed Low Gear: 182 RPM Max. Speed High Gear: 1230 RPM Facing Head Speeds: Max. Speed Low Gear: 37 RPM Max. Pictures show machine without guarding. Rebuilt ... moreand Retrofit: 2012 We do have the guarding.
Buy It Now
Condition: Used Location: Toledo, United States VERTICAL KNEE TRAVEL.. SERIAL..: BR-262138. : SERIES 1 PROTO-TRAK. HEAD SWIVELS, LEFT/RIGHT. : 90 DEGREE EITHER WAY. HEAD TILTS, FRONT/BACK..: 45 DEGREE ... moreEITHER WAY.
Buy It Now
Condition: Used Location: Leander, United States Manufacturer:Leblond Makino. (1) Leblond Makino FNC-74-A20 Fanuc 6S Spindle Section. Manufacturer: Leblond Makino. Model:FNC-74-A20 CAT. Notes:This item ... morewas not tested by us, since we do not have the proper resources, though it was removed from a working machine (FNC-74-A20 CAT) at a decommissioned facility.
Buy It Now
Condition: Used Location: Stone Mountain, United States 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. Material Thickness: 28 Gauge. We also ... morereserve the right to correct any stenographic errors.
Buy It Now
Condition: Used Location: Baltimore, United States Motor: 7.5 HP / 240v, 440v / 3ph. Work Light. Model: MB20-A Series C. Spindle to Table Top: 3 3/4″ – 27 3/4″. FOB Our Baltimore, MD Warehouse. Weight: ... moreapprox. 7,000 lbs. Rapid Traverse: X,Y: 500 ipm; Z: 300 ipm.
Buy It Now
Condition: Used Location: Scottsdale, United States 2010 PMS Systems KW20-15. We work with you to find the right industrial machine tools, and provide services to help you with financing machines, liquidation, ... moreappraisals, and more. Item sold subject to prior sale.
Buy It Now
Condition: Used Location: Middlebury, United States Model: VS50. For Hitachi Seiki VS50 Vertical CNC Mill. Need it urgently?. Call us and we will do what we can to get it to you quickly. Country of Manufacture: ... moreJapan. Unless otherwise specifically agreed to in writing by.
|
|
|
|
SHIN NIPPON KOKI (SNK) HF-4PK CNC OR COPY GANTRY VERTICAL MILL
For more info; Jack Stefano 800 382 8322 or jack(at)fmsweb.com Check our 100% Feedback! We reserve the right to cancel or end this auction anytime as we have local sale rep's promoting this machine. SHIN NIPPON KOKI(SNK) HF-4PK CNC OR COPY GANTRY MILL Machine Specifications: MANUFACTURER. SNK(SHIN NIPPON KOKI) MODEL. HF-4PK AGE. 1985 TABLE SIZE. 79" X 157" 2.000 X 4000 mm COPYING RANGE. 157" X 79" X 51" 4.000 X 2,000 X 1,300 mm DISTANCE BETWEEN COLUMNS. 102" 2.600 mm) DISTANCE FROM TABLE TO SPINDLE END. 71" 1800 mm) MAX. TABLE LOAD. 33.000 LBS(15,000 KG) MAX. AUX(COPY) TABLE LOAD. 11.000 LBS(5,000 KG) SPINDLE SPEED RANGE. 40- 2.000 RPM MAIN DRIVE MOTOR. 30 HP(22 KW) EQUIPPED WITH: FANUC 12M CONTROL UPDATED 1990 SWIVEL WORK HEAD COPY/TRACER HEAD ADJUSTABLE RAIL HEAD MACHINE IS DISMANTLED AND READY FOR ... moreLOADING Thanks for Looking! wismet nov12
|
|
|
KITAMURA MYCENTER 2X CNC MILL, VERTICAL MACHINING CENTER
Kitamura my center 2xi No control panel. For parts serial#07234 loading and/or trans avail. Posted with
|
|
|
Excel PMC 5T18 CNC MILL Vertical Machining Center year 2000
2000 Excel PMC 5T18 CNC MILL in good working condition. Shipping is the responsibility of the buyer!
|
|
|
2001 Hitachi Seiki CS25 Vertical CNC Boring Mill
2001 Hitachi-Seiki CS25 BORING MILLS. VERTICAL& VTL, CNC& NC Seicos 21L CNC/crt Capacity: Table Diameter 10" Maximum Swing 15.7" Maximum Height Under Rail 14.6" Spindle: Spindle Speed: Minimum 30 rpm Maximum 4000 rpm Motor 25 hp Head(s) Number of Heads 1 Turret Head 12 Travel X-Axis 15.5" Z-Axis 14.6" Spindle: Spindle Nose A2-8 Diameter of Spindle Thru Hole 3.1" Spindle Bearing Inside Diameter 5.1" Turret Head: No. of Tools 12-station Shank Size of O.D. Tool 1" Boring Bar Size 1-1/4" Feedrate: X-Axis 1181 IPM Z-Axis 1181 IPM Equipped With: Seicos 21L/CRT CNC Control Pick& Place Spindle System Chip Conveyor RS-232 Interface Transformer Coolant System TERMS OF SALE: CONDITIONS OF SALE: All equipment is sold as is. Where is on location unless otherwise stated. For immediate acceptance. ... moreAnd subject to prior sale or other disposition, and change without notice. Proposals and acceptances of orders are made with the mutual understanding that orders are not subject to cancellation. Shipping date is approximate only. And contingent upon delays or nonperformance occasioned by causes beyond our control. PAYMENT: Payment in full before removal of machine. ALL PAYMENTS MUST BE CLEARED BANK FUNDS BEFORE REMOVAL. All Payments are payable in U.S. funds ONLY. Please DO NOT pay for your purchase until you have received our invoice. Items not paid within 10 days from end of sale will be re-listed. TAXES: Sales. Revenue, excise or other taxes applicable to purchase shall be added to the purchase price and shall be paid by Buyer or in lieu thereof. Buyer shall provide Seller with an appropriate exemption certificate from any such taxes. SHIPPING: Buyer is responsible for all shipping charges. Seller will load machine unto the Buyer’s truck. We do not ship internationally. CONTROLLING PROVISIONS: It is expressly understood and agreed that the terms and conditions herein set forth shall prevail over any conflicting provisions contained in the Purchaser’s acceptance forms or in an
|
|
|
EXCEL 810 CNC Vertical Machining Center Mill, Fanuc 0 M, Cat 40 taper, Stallion
EXCEL 810 CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: MANUFACTURE DATE 1994 TABLE SIZE 35.4" x 18.9" MAXIMUM TABLE LOAD 882 LBS SPINDLE NOSE TO TABLE TOP 5.5" 27.6" X AXIS TRAVEL 31.9" Y AXIS TRAVEL 20.1" Z AXIS TRAVEL 22" RAPID TRAVERSE RATE X& Y AXES 630 IPM RAPID TRAVERSE RATE Z AXIS 512 IPM SPINDLE TAPER CAT 40 SPINDLE SPEEDS 6000 RPM SPINDLE MOTOR 12 HP TOOL CHANGER CAPACITY 24 + 1 STATION ATC TOOL CHANGE TIME(TOOL TO TOOL) 2 SECONDS MAXIMUM TOOL WEIGHT 13 LBS WEIGHT. APPROX. 12.400 LBS DIMENSIONS. APPROX. 82"L x 94"W x 98"H EQUIPPED WITH: FANUC O-M CNC CONTROL WITH 9" CRT, RS-232C PORT INTERFACE FOR DNC OPERATION, SWING-ARM SIDE-MOUNT 24 + 1 STATION AUTO TOOL CHANGER, HELICAL INTERPOLATION. USER CUSTOM MACROS, COOLANT SYSTEM WITH TANK& PUMP, FULLY ENCLOSED GUARDING. ... moreWORK LAMP, ALL AVAILABLE MANUALS LOCATION: OUR WAREHOUSE; UNDER POWER. FRANKSVILLE, WI(NEAR MILWAUKEE. WI) You are welcome to inspect. Run, and listen to this mill prior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer with inventory on site at our Franksville. Wisconsin facility, and on site equipment available nationwide. Our staff haas a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We have several hundred relationships with various sources of used machinery& equipment available worldwide and can both provide and locate superior used machining tools like: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, EDM, drill chuck, ironworker, turret punch, welder, tube bender. Whether you are in the market to sell your surplus equipment or purchase that hard-to-find machine. We have a knowledgeable staff that will strive to deliver quality products and services based on
|
|
|
KIA VA40 CNC Vertical Machining Center Mill, Fanuc 16M Control, GearBox Spindle
KIA VA40 CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: MANUFACTURED NEW 1991 TABLE SIZE 15.7" x 49.2" MAXIMUM TABLE LOAD 1100 LBS SPINDLE NOSE TO TABLE TOP 5.8" 23.8" X AXIS TRAVEL 28" Y AXIS TRAVEL 16" Z AXIS TRAVEL 18" RAPID TRAVERSE RATE X& Y AXES 472 IPM RAPID TRAVERSE RATE Z AXIS 472 IPM SPINDLE TAPER BT 40 SPINDLE SPEEDS(2 SPEED GEARED) 45- 6.000 RPM SPINDLE MOTOR 7.5 HP TOOL CHANGER CAPACITY 25 STATION ATC DIMENSIONS. APPROX. 124" x 92" x 98" WEIGHT. APPROX. 10.300 LBS EQUIPPED WITH: FANUC 15-M CNC CONTROL WITH 9" CRT, GEARBOX SPINDLE. RIGID BOX WAY DESIGN, RS-232C PORT INTERFACE FOR DNC OPERATION, RIGID TAPPING(SYNCHRONOUS/ SOLID TAPPING) LOCATION: OUR WAREHOUSE; UNDER POWER. FRANKSVILLE, WI(NEAR MILWAUKEE. WI) You are welcome to inspect. Run, and listen to this mill ... moreprior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer with inventory on site at our Franksville. Wisconsin facility, and on site equipment available nationwide. Our staff haas a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We have several hundred relationships with various sources of used machinery& equipment available worldwide and can both provide and locate superior used machining tools like: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, EDM, drill chuck, ironworker, turret punch, welder, tube bender. Whether you are in the market to sell your surplus equipment or purchase that hard-to-find machine. We have a knowledgeable staff that will strive to deliver quality products and services based on your needs, and assist you from start to finish. We don't just want your business; we want your repeat business. Thank You. Bid With Confidence! Check out my othe
|
|
|
2000 Hurco Newall Vertical CNC Mill 10" x 50" Table 3-Axis SmartPath CNC Control
FOR SALE: 2000 Hurco-Newall BM23 Vertical CNC Mill 0 false 18 pt 18 pt 0 0 false false false SPECIFICATIONS: Year of manufacture 2000 Model BM23 Control SmartPath Size of table(length x width) 50" x 10" Longitudinal travel 31-1/2" Cross travel 16" Maximum head(Z) travel 18" Maximum workpiece weight(centered) 1000 lbs. Main motor 3 HP Spindle speeds-number Inf. variable-range 70 to 4000 rpm Spindle taper NST 30 Quill diameter 3-3/8" Quill travel 5" Electrical 220/440/3/60 Dimensions(L x W x H) 112" x 79" x 80" Weight(approx. 4.250 lbs. SMARTPATH Control Features: Conversational programming. Conversational auto run, Dry run Feedrate override, Auto radius bland, Inch/metric programming 0.0001" programming resolution, Subroutines, Repeat loops 32 bit PC handware, Canned cycles, Interpolation, ... moreRS-232 port, 3-1/2" floppy EQUIPPED WITH: 3 axis CNC control. 2.5 axis programming Auto lubrication, Coolant system with chip pan Worklight, Hardened and ground ways Way covers and safety hand cranks Contact: biomedtool@yahoo.com Purchasing Information: Payment must clear prior to shipment or pick up Payment methods include wire transfer. Certified check, personal/business check and paypal Warranty: Machine is in good working order and tested Freight and Shipping: Shipping/Trucking charge is not included in the machine price We coordinate shipping for you with professional trucking companies About Us and Our Mission: We are a consortium of three divisions selling biomedical. Scientific and cutting equipment. We have hundreds of pieces of equipment available for sale. We have decided to start listing on EBAY. We make sure to have the equipment tested prior to listing them. You will be buying from a company that has partners in Pediatrics. Cardio, Veterinary Medicine, Scientific Research, Bio-Chemistry, Tooling, Cutting Companies, etc. Please feel free to message us at: biomedtool@yahoo.com
|
|
|
2001 Proto-trak EDGE Sharp CNC Vertical Milling Machine Bridgeport Trak Mill
Update: I have been getting questions about the machine so I have added a nice 4" vise. Drastically dropped the price and included some new photos. I am selling a Sharp Prototrak Edge Control Knee Mill. It comes with a One Shot Lube System. Chromed Quill, Honed Head, Precision Scraped V Ways on Ram, Ground Table with Coolant Trough. Double Saddle Locks,and Adjustable Ram Gib. SPECIFICATIONS: Table Size. 9"x 42" Longitudinal Travel. 30" Cross Travel. 12" Vertical Knee Travel.16" Ram Travel.18" Turret Rotation.360° Spindle Speeds(8)64- 4500 Spindle Taper.R8 Quill Travel.5" Motor.3HP. 220/3/60/460 Weight.2.300lbs. To see this machine live in action you can call me at 612-803-5414 This is a great machine with everything in good working order and ready to make parts. I am selling it because I no longer ... morerun a machine shop and need to make space for the owner of the building. This machine is just waiting to start making parts again. Run the machine and make chips. Don't miss out on this opportunity to own this great machine first before someone else snags it up. Bid on it now and take the first step today to start making parts! I can help the buyer arrange loading and shipping. Happy bidding and good luck!
|
|
|
FRYER MB-10 CNC Vertical Bed Milling Center, Cat 40 taper 50" Table, Mill Q R 15
FRYER MB-10 CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: MFG DATE/ INSTALLED NEW 2006/ 2007 TABLE SIZE 50" x 14" MAXIMUM TABLE LOAD 2000 LBS SPINDLE NOSE TO TABLE TOP 4" 23" X AXIS TRAVEL 32" Y AXIS TRAVEL 17" Z AXIS TRAVEL 19" SPINDLE CENTER TO COLUMN 18" SPINDLE TAPER CAT 40 SPINDLE SPEEDS 6000 RPM SPINDLE MOTOR 12 HP TOOL CHANGER CAPACITY 12 TOOLS RAPID TRAVERSE RATE X& Y AXES 400 IPM CUTTING FEED RATE 0.1- 300 IPM DIMENSIONS. APPROX. 100" x 67" x 78" WEIGHT. APPROX. 6.000 LBS EQUIPPED WITH: ANILAM 3000 Touch CNC CONTROL w/COLOR MONITOR, USB PORT INTERFACE FOR DNC OPERATION, SHOP FLOOR SOFTWARE UPGRADE. RIGID TAPPING. REMOTE JOG HANDLE/WHEEL, w/TOOL CHANGER OPTION, STAINLESS STEEL ENCLOSURE, COOLANT SYSTEM. ALL AVAILABLE MANUALS LOCATION: OUR WAREHOUSE; UNDER POWER. FRANKSVILLE, ... moreWI(NEAR MILWAUKEE. WI) You are welcome to inspect. Run, and listen to this mill prior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer with inventory on site at our Franksville. Wisconsin facility, and on site equipment available nationwide. Our staff haas a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We have several hundred relationships with various sources of used machinery& equipment available worldwide and can both provide and locate superior used machining tools like: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, EDM, drill chuck, ironworker, turret punch, welder, tube bender. Whether you are in the market to sell your surplus equipment or purchase that hard-to-find machine. We have a knowledgeable staff that will strive to deliver quality products and services based on your needs, and assist you from start to finish. We don't just want your b
|
|
|
Vertical Mill CNC ACRAMILL Southwestern Industries AM2V Proto Trak
26" x 12" x 5" ACRAMILL Southwestern Industries AM2V Proto Trak CNC Vertical Mill(1994) Specifications Table working capacity: 9" x 42" X Axis Travel: 26" Y Axis Travel: 12" Z Axis Travel: 5" Taper in spindle: R-8, Spindle Speeds: 75-4200 RPM, Main Motor Drive: 3 HP, Equipped with: Southwestern Industries Proto Trak 3 Axis CNC Control. Kurt Power Draw Bar, Machine being sold As Is. Buyer is responsible for shipping. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13f9d76d643-0xe7-
|
|
|
Matsuura MC-500V CNC Vertical Mill
Machine is in place and powered but hasn't been used in several years. We no longer have staff that know how to run it. Machine must be moved and that cost is not included in price. Rigging directions are included in the documents. Machine Specs: 1979 Matsuura MC-500V CNC Yasnac 3000-B controller. System M5 tape reader. X-axis 20 inches. Y-axis 13 inches. Z-axis 18 inches. Table size 36" x 12.5" 16 tool changer. 6.000 RPM spindle speed.
|
|
|
Compumill CNC Vertical Milling Machine Computer Control Mill Miller PRISTINE!
You are bidding on a used Compumill CNC Vertical Milling Machine in Pristine Condition! Featuring: Compumill 4 Axis CNC Vertical Table size: 9" x 42" Spindle Speed: 60-4500 RPM. X-Axis Table Travel: 30" Y-Axis Table Travel: 16" Quill Travel: 5" Z-Axis Travel: 16" Spindel Taper: 30NST. Head Swivel Left/Right: 90 degrees. Main Drive Motor: 3 HP. Electrics: 220/440/60/3. Approximate Machine Weight: 2600 Lbs. Approximate Dimensions: 72 LR x 64. Front to Back: 96" H. Serial#85020051. Model# CV 300 Palm Tree Catalog#LR070213 Bid with Confidence on this item. Check our feedback! All information deemed accurate but may vary from model to model. Call Larry for any questions you may have. Call 401-965-5557 or Email: Larryrazza@hotmail.com_ Equipment Financing Available Through These Fine Leasing Companies: Online ... moreleasing applications(get monthly payments) FIRST LEASE https:id51.securedata.net/firstleaseonline/creditapp/Direct_Credit_App.html DIRECT CAPITAL LEASING http:ebay.directcapital.com* Please Note: Not all machines may qualify for Leasing. Payments: We accept company checks and Major Credit Cards. SHIPPING: Contact us for great rates on shipping. We always get better rates. Please email us for a rigging and shipping quote(just include the zip code when inquiring and if you have a loading dock or if you are a residential delivery. Thanks) Email: Larryrazza@hotmail.com or call 401-965-5557. We also ship worldwide. CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal. Change and prior sale without notice. Shipping dates are only approximate and contingent upon delays beyond our control. All orders received are binding only when they have been accepted and acknowledged by us in writing. Provisions in customer's purchase orders contrary to these conditions shall not be binding upon us unless accepted in writing. Unless otherwise specified. Prices quoted are F.O.B. shipping point, exclusive of State, County and Fe
|
|
|
Vertical Boring Mill CNC with Tool Changer 36" chuck New Century (2000)
36" chuck New Century CNC Vertical Boring Mill with Tool Changer(2000) Specifications and Equipment Table Diameter: 36" Max Swing: 46" Height Under Rail: 36" Table Speeds: 450 RPM(Variable) X-Axis Travel: 40" Z Axis Travel: 30" X and Z Axis Drive: 30 HP, Main Motor Drive: 60 HP, Tool Changer Capacity: 12 ATC, Equipped With: 12 station Tool Changer with coolant though tools. Fanuc 18iTc CNC Control' Base, column, and crossrail are heavy duty cast IRON, X axis ways are 55mm linear ways with 4 heavy duty linear roller packs, Z axis ram is heavy duty 7" octagon 4142 heat treated ram w/4-30" gibbs, X& Z axis ballscrews are 63mm diameter, precision ground screws, ATC(12 station) Sandvik Coromant, Coolant through tools, Table bearing is heavy duty TIMKIN TAPER roller bearing 2 speed ZF Table transmission ... morewith speeds to 120 rpms, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
|
|
|
Boring Mill Vertical Olympia Model V60 CNC (2000) from assetexchangeinc.com
60" Olympia Model V60 CNC Vertical Boring Mill(2000) Specifications Table Size: 55" Max Swing: 70" Maximum turning height under rail/tool: 56" Maximum workpiece weight: 35000 LBS, Maximum ram travel(Z-axis) 39.4" Maximum saddle travel(X-axis) 56" Cross rail travel: 28" Maximum cutting force: 11.200 lbs, Table speed: 1-350 RPM, Rapid traverse rate: 400 IPM, Current Electrical Arrangement: 480/3/60, Equipped With: GE Fanuc 18i-T CNC Control. 12 Position ATC, 55" Diameter Table, Hennig Chip Conveyor, Stainless Steel Way Covers, Full Enclosures, Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
|
|
|
Amera Seiki VAS-3 CNC Vertical Machining Center, 40 x 20 Box Way, VMC Mill Taper
AMERA SEIKI VAS-3 CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: DATE OF MANUFACTURE 2000 TABLE SIZE 20" x 48" MAXIMUM TABLE LOAD 1.760 LBS SPINDLE NOSE TO TABLE TOP 4" 29" X AXIS TRAVEL 40" Y AXIS TRAVEL 19.8" Z AXIS TRAVEL 25" RAPID TRAVERSE RATE X.Y, Z AXIS 960 IPM CUTTING FEED RATE 0.04- 394 IPM SPINDLE TAPER CAT 40 SPINDLE SPEEDS(2 SPEED GEARED) 30- 7.500 RPM SPINDLE MOTOR 15 HP TOOL CHANGER CAPACITY 24 STATIONS MAXIMUM TOOL WEIGHT 13.2 LBS WEIGHT. APPROX. 12.200 LBS DIMENSIONS. APPROX. 132" x 93" x 109" EQUIPPED WITH: FANUC O-MD CNC CONTROL, RS-232C PORT INTERFACE FOR DNC OPERATION, RIGID TAPPING(SYNCHRONOUS/ SOLID TAPPING) PROGRAMMABLE COOLAN NOZZLE. GEARBOX SPINDLE. REMOTE JOG HANDLE/WHEEL, COOLANT SYSTEM WITH TANK& PUMP, FULLY ENCLOSED GUARDING. ALL AVAILABLE MANUALS, RIGID ... moreBOX WAY DESIGN* LOCATION: OUR WAREHOUSE; UNDER POWER. FRANKSVILLE, WI(NEAR MILWAUKEE. WI) You are welcome to inspect. Run, and listen to this mill prior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer with inventory on site at our Franksville. Wisconsin facility, and on site equipment available nationwide. Our staff haas a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We have several hundred relationships with various sources of used machinery& equipment available worldwide and can both provide and locate superior used machining tools like: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, EDM, drill chuck, ironworker, turret punch, welder, tube bender. Whether you are in the market to sell your surplus equipment or purchase that hard-to-find machine. We have a knowledgeable staff that will strive to deliver quality products and services based on your needs, and a
|
|
|
Fryer MC-60 CNC Vertical 60" x 30" BOX WAY CNC Machining Center Mill Cat 40 VMC
FRYER MC-60 CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: MFG DATE 2000 TABLE SIZE 67" x 24" MAXIMUM TABLE LOAD 4.000 LBS SPINDLE NOSE TO TABLE TOP 2" 30" X AXIS TRAVEL 60" Y AXIS TRAVEL 30" Z AXIS TRAVEL 28" RAPID TRAVERSE RATE X. Y, Z AXES 1000 IPM CUTTING FEED RATE 0.01- 600 IPM SPINDLE TAPER CAT 40 SPINDLE SPEEDS 0- 6.000 RPM SPINDLE MOTOR 20 HP TOOL CHANGER CAPACITY 20 STATION ATC MAXIMUM TOOL WEIGHT 13.5 LBS WEIGHT. APPROX. 19.700 LBS DIMENSIONS. APPROX. 184"L x 108"W x 99"H EQUIPPED WITH: ANILAM 5300M CNC CTRL CONVERSATIONAL& COLOR GRAPHICS, USB PORT INTERFACE FOR DNC OPERATION, BOX WAY DESIGN. M& G CODE PROGRAMMING, CHIP REMOVAL AUGER(FULL LENGTH) L.E.D. LIGHTING, REMOTE JOG HANDLE(HANDWHEEL) FLOPPY DISC DRIVE. RIGID TAPPING(SYNCHRONOUS/ SOLID TAPPING) FLOOD COOLANT ... moreSYSTEM w/CHIP WASH-DOWN, FULLY ENCLOSED SPLASH GUARDING. ALL AVAILABLE MANUALS LOCATION: OUR WAREHOUSE; UNDER POWER. FRANKSVILLE, WI(NEAR MILWAUKEE. WI) You are welcome to inspect. Run, and listen to this mill prior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer with inventory on site at our Franksville. Wisconsin facility, and on site equipment available nationwide. Our staff haas a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We have several hundred relationships with various sources of used machinery& equipment available worldwide and can both provide and locate superior used machining tools like: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, EDM, drill chuck, ironworker, turret punch, welder, tube bender. Whether you are in the market to sell your surplus equipment or purchase that hard-to-find machine. We have a knowledgeable staff that will strive to deliv
|
|
|
60" x 30" Cat 50 DAHLIH MCV-1450 CNC Vertical Machining Center, Mill VMC Dah lih
DAH LIH MCV-1450 CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: MANUFACTURED NEW 1999 TABLE SIZE 62.9" x 34.6" MAXIMUM PALLET LOAD 3.300 LBS SPINDLE NOSE TO PALLET TOP 7" 35" X AXIS TRAVEL 57" Y AXIS TRAVEL 29.5" Z AXIS TRAVEL 29.5" RAPID TRAVERSE RATE X/Y/Z/ AXES 787 IPM CUTTING FEEDRATE 0.04- 197 IPM SPINDLE TAPER CAT 50 SPINDLE SPEEDS(GEARBOX) 35- 3.500 RPM SPINDLE MOTOR 20 HP TOOL CHANGE CAPACITY 30 TOOLS MAXIMUM TOOL WEIGHT 33 LBS MAXIMUM TOOL LENGTH 13.8" MACHINE WEIGHT 22660 LBS APPROXIMATE DIMENSIONS 156" x 125" x 138" EQUIPPED WITH: FANUC 18M CNC CONTROL WITH CRT, RS-232C PORT INTERFACE FOR DNC OPERATION, HELICAL INTERPOLATION. RIGID TAPPING, 2 SPEED GEARED HEAD. SPINDLE CHILLER, ALL BOX WAY CONSTRUCTION, STANDARD COOLANT SYSTEM WITH TANK& PUMP, ALL AVAILABLE MANUALS. ... moreLOCATION: OUR WAREHOUSE; UNDER POWER. FRANKSVILLE, WI(NEAR MILWAUKEE. WI) You are welcome to inspect. Run, and listen to this mill prior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer with inventory on site at our Franksville. Wisconsin facility, and on site equipment available nationwide. Our staff haas a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We have several hundred relationships with various sources of used machinery& equipment available worldwide and can both provide and locate superior used machining tools like: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, EDM, drill chuck, ironworker, turret punch, welder, tube bender. Whether you are in the market to sell your surplus equipment or purchase that hard-to-find machine. We have a knowledgeable staff that will strive to deliver quality products and services based on your needs, and assist you from st
|
|
|
12.5" x 34" Used Bridgeport CNC Vertical Mill, Mdl. Series 1, !!!!!SOLD AS IS!!!
Established in 1954. Sterling Machinery is one of America's largest, most well-established national dealers for Fabrication Equipment and Chip Making Machinery. Our vast warehouse contains over 2,000 pieces of New and Used machines available for inspection in person, or live via internet webcam fed directly to your computer's browser. We sell New and Used Metal Working Machine Tools Dealer. Press Brakes, Shears, Lathes, Mills, Punch Presses, Saws, Grinders, Drills and much more. We also carry a wide variety of tooling at competitive prices. Affordable pricing is available to qualified customers. Whatever your project demands, call us first for competitive pricing and selection. 12.5" x 34" Used Bridgeport CNC Vertical Mill. Mdl. Series 1, Boss 3 Axis CNC Control, Pneumatic Spindle Speed Change& Brake, Bijur Spray mist ... moreCoolant, Chrome Ways#A1456*LOCATED IN HAYWARD, CA Model: Series l Capacity: 12.5" x 34" Serial: 2524 Full Description: Manufacture: Bridgeport Table Size: 12.5" x 34" Longitudinal Travel: 18" Cross Saddle Travel" 12" Vertical Knee Travel: 14.5" Spindle Speed(Variable) 60- 4.200 RPM Spindle Nose: Erickson Quick Change Spindle Quill Travel: 5" Table Load Capacity: 300 LBS. Throat Distance: 6.75" 18.75" Floor Area: 75" x 65" x 82" Weight: 3.000 LBS. Location: Hayward. CA-PME Horsepower: 2 Equipped With: Boss 3 Axis CNC Control Pneumatic Spindle Speed Change& Brake Bijur Spray Mist Coolant System Auto Lube System Chrome Ways Tooling& Collets CONTACT US BEFORE YOU BID OR COMMIT TO PURCHASE FOR A FREIGHT QUOTE! FREIGHT VARIES BASED ON DELIVERY ZONE AND WE WILL NEED YOUR ZIP CODE TO GET THE MOST COMPETITIVE RATE FOR YOU! TERMS& CONDITIONS(Please read. You agree to these terms upon purchase) Shipping and Handling: Buyers are responsible for all Shipping and Handling charges. Delicate and expensive equipment requires special handling to ensure its safe delivery. PLEASE READ: ALL SMALL ITEMS THAT FIT INTO A
|
|
|
2001 Fadal Vertical Machining Center 8030 Model 907 CNC Mill
2001 Fadal Vertical Machining Center 8030 Model 907 CNC Mill. Serial Number 012001062539. XY) Glass Scales. 220 Volt. Many Extras: 4 Meg Memory Expansion. CAT-40. Rigid Tapping. High Speed CPU. Graphics. Remote MPG. Servo Coolant. TLC. Servo Turret. 10.000 RPM Spindle. Buyer Responsible for Shipping. Any Questions please email.
|
|
|
Enshu DT Center Center/Drill Center CNC Vertical Mill
Enshu Drill and Tap Center fanuc OM Control Buyer is responsible for shipping and shipping arrangements Video Table Working Surface 23.6" x 15.7" Max. table load 1.100 lbs X-axis travel 15.7" Y-axis travel 11.8" Z-axis travel 7.9" Distance from spindle to table 0.4" 17.3" Spindle Speeds 80-8000 RPM Spindle taper#30 Rapid feed rate(X& Y) 1181.1 IPM Rapid feed rate(Z) 944.9 IPM Cutting feed rate 2-197 IPM Rigid tap 3.600 Main Motor 1.5/5 10 min. ATC 10 Tool Equipped With: Fanuc OM Control Books& Manuals
|
|
|
2000 HAAS MINI-MILL CNC VERTICAL MACHINING CENTER, FLOPPY DRIVE, RIGID TAPPING
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 2000 HAAS MINI-MILL CNC VERTICAL MACHINING CENTER. FLOPPY DRIVE, RIGID TAPPING Ref# 151955 iammdna XVMCTR HAAS MINI-MILL MFG: 2000 S/N: 22608 SPECIFICATIONS: X-AXIS TRAVEL. 16" Y-AXIS TRAVEL. 12" ... moreZ-AXIS TRAVEL. 10" SPINDLE NOSE TO TABLE TOP. 4" TO 14" TABLE SIZE. 36" X 12" MAX WEIGHT ON TABLE. 500 LBS SPINDLE TAPER. CAT 40 SPINDLE SPEED. 6.000 RPM SPINDLE MOTOR. 7.5 HP MAX RAPIDS. 600 IPM MAX CUTTING FEEDS. 500 IPM TOOL CHANGER. 10 TOOLS MACHINE WEIGHT. 3.400 LBS MACHINE DIMENSIONS. 84" X 71" X 102" EQUIPPED WITH: COOLANT PUMP FLOPPY DRIVE RIGID TAPPING Machine Location: HARRISON. NJ Click Here For More Haas Machines Click Here For More CNC Machines- VERTICAL MACHINING CENTERS. VMC's(s) Questions about this Machine? Call Mark at(800) 873-6224 ext 7510 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one of the world's largest machinery dealers. In business since 1971. All used items bought from our eBay store are covered by a standard MDNA(Machinery Dealer's National Association) 30 day return privilege. Which means you can return an item you are dissatisfied with for a full refund. Please for complete de
|
|
|
Kia KV40A CNC Vertical Machining Center Mill 40 Taper Fanuc, SMALL FOOTPRINT VMC
KIA KV-40A CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: MANUFACTURED NEW 1992 TABLE SIZE 16" x 35.4" MAXIMUM TABLE LOAD 660 LBS SPINDLE NOSE TO TABLE TOP 5.9" 24" X AXIS TRAVEL 22.4" Y AXIS TRAVEL 16" Z AXIS TRAVEL 18" RAPID TRAVERSE RATE X& Y AXES 590 IPM RAPID TRAVERSE RATE Z AXIS 472 IPM CUTTING FEED RATE 0- 196 IPM SPINDLE TAPER BT 40 SPINDLE SPEEDS 150- 6.000 RPM SPINDLE MOTOR 7.5 HP TOOL CHANGER CAPACITY 20 STATION ATC DIMENSIONS. APPROX. 82" x 88" x 98" WEIGHT. APPROX. 7800 LBS EQUIPPED WITH: FANUC O-MC CNC CONTROL WITH 9" CRT, RS-232C PORT INTERFACE FOR DNC OPERATION, RIGID TAPPING(SYNCHRONOUS/ SOLID TAPPING) FLOOD COOLANT SYSTEM w/PUMP& TANK, ALL AVAILABLE MANUALS LOCATION: OUR WAREHOUSE; UNDER POWER. FRANKSVILLE, WI(NEAR MILWAUKEE. WI) You are welcome to inspect. ... moreRun, and listen to this mill prior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer with inventory on site at our Franksville. Wisconsin facility, and on site equipment available nationwide. Our staff haas a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We have several hundred relationships with various sources of used machinery& equipment available worldwide and can both provide and locate superior used machining tools like: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, EDM, drill chuck, ironworker, turret punch, welder, tube bender. Whether you are in the market to sell your surplus equipment or purchase that hard-to-find machine. We have a knowledgeable staff that will strive to deliver quality products and services based on your needs, and assist you from start to finish. We don't just want your business; we want your repeat business. Thank You. Bid Wi
|
|
|
10" x 50" Webb Champ CNC Vertical Mill Model 4VH Anilam 1100M Control 3 HP Nice
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 10" x 50" Webb Champ CNC Vertical Mill Model 4VH Anilam 1100M Control New: 1995 3 HP Motor Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Variable Speed Head Power Draw Bar Note: CNC Needs Repair Shipping: This item is available for local pick up in the Oxnard. CA area. If you would like this item shipped please let us know before purchase so we can make the proper arrangements. Please be aware that if you reside in California we charge 8.00% Sales Tax. Returns: 14 Day Return Policy. If the items is not as describe please contact us within 14 days of arrival unless otherwise specified. We are not responsible for return shipping. If you have any questions regarding ... morethe item please Don’t hesitate to Contact Us at: 818.441.8941
|
|
|
1999 Haas VF-4 CNC Mill Vertical Machining Center 4th Axis Ready Thru Spindle
1999 Haas VF-4 CNC Vertical Machining Center Machine will be receiving a brand new spindle and will be completely gone through prior to shipment. Specifications: Control. Haas Table Size. 52" x 18" X-Axis Travel. 50" Y-Axis Travel. 20" Z-Axis Travel. 25" Spindle Nose to Table Top. 4" 29" Spindle Taper. CAT 40 Spindle Speed. 7.500 RPM Spindle Motor. 15 HP Tool Changer.20 Position Equipped With: 4 th Axis Pre-Wire Gear Box Haas Quick Code Programmable Coolant Chip Auger Spindle Orientation 1MB Memory 3.5" Floppy Disk Drive Rotation and Scaling Custom Macros Thru Spindle Coolant Please contact Jason Stob 708 790-3358 with any questions. Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it ... moreis not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 60007. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(520 Machinery Sales LLC and/or the S
|
|
|
Famup MCP 100 Pallet Changer Vertical Machining Center, 40 x 20, CNC Fanuc Mill
FAMUP MCP-100 Evolution 2-PALLET CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: YEAR OF MANUFACTURE 2000 TABLE SIZE(2) 39.4" x 17.7" 2 PALLETS) MAXIMUM TABLE LOAD 1.322 LBS SPINDLE NOSE TO TABLE TOP 2" 28" X AXIS TRAVEL 43.3" Y AXIS TRAVEL 19.7" Z AXIS TRAVEL 25.1" RAPID TRAVERSE RATE(X. Y, Z) 1181 IPM CUTTING FEED RATE 0.1- 400 IPM SPINDLE TAPER BT 40 SPINDLE SPEEDS 0- 10.000 RPM SPINDLE MOTOR 20 HP TOOL CHANGER CAPACITY(30) SIDE-MOUNTED POCKET-ARM TOOL CHANGE TIME 2.9 SECONDS PALLET CHANGE TIME 8.9 SECONDS THRUST OF MECHANICAL PALLET LOCK 4.850 LB CAM-LOCK MACHINE WEIGHT. APPROX. 15.700 LBS DIMENSIONS. APPROX. 135"L x 119"W x 128"H EQUIPPED WITH: FANUC 18iM CNC CONTROL w/10.4" LCD SCREEN, RS-232C PORT INTERFACE FOR DNC OPERATION, AUTOMATIC 2-PALLET CHANGER(SIDE BY SIDE) w/CHIP ... moreWASHDOWN/FLUSH COOLANT FEATURE(HIGH-FLOW) SIDE-MOUNTED POCKET-ARM TOOL CHANGER, LIFT-UP TYPE CHIP CONVEYOR. 10000 RPM SPINDLE, RIGID TAPPING(SYNCHRONOUS/ SOLID TAPPING) REMOTE JOG HANDLE/REMOTE PULSE GENERATOR, SAFETY LIGHT CURTAINS AT SET-UP PALLET(OPTICAL) PNEUMATIC AUTO DOOR FOR PALLET SYSTEM, COOLANT SYSTEM WITH TANK& PUMP, 4) DOORS FOR EASE OF ACCESS ON ALL SIDES OF PALLET, FULLY ENCLOSED GUARDS. ALL AVAILABLE MANUALS, MADE IN ITALY. LOCATION: OUR WAREHOUSE; UNDER POWER. FRANKSVILLE, WI(NEAR MILWAUKEE. WI) You are welcome to inspect. Run, and listen to this mill prior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer with inventory on site at our Franksville. Wisconsin facility, and on site equipment available nationwide. Our staff haas a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We have several hundred relationships with various sources of used machinery& equipment available worldwide and can both provide and locate superi
|
|
|
2012 REMAND FADAL 4020 HT 4020HT CNC VERTICAL MILL MACHINING CENTER 10K RPM 20HP
CLICK BELOW TO WATCH THE VIDEO OF THIS MACHINE: ARPI MACHINE SALES CORPORATION 12165 BRANFORD STREET SUITE F SUN VALLEY CA 91352 OFFICE: 818 890-7625 VERY IMPORTANT! PLEASE READ. AFTER PURCHASING THIS OR ANY OTHER ITEM FROM US. PLEASE LEAVE POSITIVE FEEDBACK AND GIVE US A 5 STAR RATING IN ALL 4 CATEGORIES. IF YOU HAVE ANY PROBLEMS WITH YOUR ORDER, PLEASE CALL US AT THE OFFICE IMMEDIATELY(BEFORE LEAVING FEEDBACK) AND WE WILL TRY TO RESOLVE ANY ISSUES YOU HAVE. FURTHERMORE, WE MARK ALL OF OUR ITEMS TO PREVENT ANY DISHONEST EBAYER FROM TRYING TO EXCHANGE OUR ITEM WITH THEIR OLD/NON WORKING ONE AND THEN ATTEMPT TO SEND BACK TO US BY CLAIMING IT AS NON WORKING IN ORDER TO RECEIVE A REFUND. THIS HAS HAPPENED SOMETIMES AND WE HAVE TAKEN SERIOUS ACTION AGAINST THESE FRAUDELENT PRACTICES IN THE PAST. THIS TYPE OF BEHAVIOR IS UNACCEPTABLE AND ACTION ... moreWILL BE TAKEN AGAINST THESE BUYERS THRU EBAY POLICIES BY REPORTING THEM TO EBAY IMMEDIATELY. HERE AT ARPI MACHINE SALES, WE REALIZE MOST PEOPLE ARE HONEST AND DO NOT PRACTICE TECHNIQUES MENTIONED ABOVE. BY THE SAME TOKEN WE ARE COMMITTED 100% TO PROVIDE SUPERIOR CUSTOMER SERVICE TO ALL. WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION MACHINE HIGHLIGHTS-RIGID TAP-10.000 RPM-20 HP SUPER HIGH TORQUE MOTOR THIS MACHINE WAS REMANUFACTURED IN 2012 BUT THE SERVO MOTORS ARE B RUSH. ORIGINAL MANUFACTURE DATE IS 1990. IT WORKS XLNT. OUR CUSTOMER IS DOWNSIZING HIS SHOP AND S ELLING MOST OF HIS MACHINES. THERE ARE OTHER FADALS AND HA AS CNC LATHES FOR SALE AS WELL. WE WILL BE POSTING THOSE ALSO. SPECIFICATIONS: Machine Control, Fadal CNC88 HS Table Size, 20" x 48" Machine Travels(X/Y/Z) 40" x 20" x 20" Spindle To Table Distance, 4" 24" Spindle Center to Column Distance, 20" Table Capacity, 1500 Lbs, Spindle Taper, Cat 40, Spindle Speeds, 10.000 Max RPM, Maximum Cutting Feed Rate, 01-250 ipm, Tool Changer Style, Carousel, Tool Changer Capacity, 21 Stations, Max Tool weight, 15 lbs, Spindle Drive, 15 HP High Torque Drive, Power Requireme
|
|
|
OKUMA MC3-V CNC VERTICAL MILL CONTROL ARM FOR CAROUSEL
ARPI MACHINE SALES. OUR PHYSICAL ADDRESS: 12165 BRANFORD STREET SUITE A SUN VALLEY CA 91352 OFFICE: 818 890-7625 DISCLAIMER: AFTER PURCHASING THIS OR ANY OTHER ITEM FROM US. PLEASE LEAVE POSITIVE FEEDBACK AND GIVE US A 5 STAR RATING IN ALL 4 CATEGORIES. IF YOU HAVE ANY PROBLEMS WITH YOUR ORDER, PLEASE CALL US AT THE OFFICE IMMEDIATELY(BEFORE LEAVING FEEDBACK) AND WE WILL TRY TO RESOLVE ANY ISSUES YOU HAVE. FURTHERMORE, WE MARK ALL OF OUR ITEMS TO PREVENT ANY DISHONEST EBAYER FROM TRYING TO EXCHANGE OUR ITEM WITH THEIR OLD/NON WORKING ONE AND THEN ATTEMPT TO SEND BACK TO US BY CLAIMING IT AS NON WORKING IN ORDER TO RECEIVE A REFUND. THIS HAS HAPPENED SOMETIMES AND WE HAVE TAKEN SERIOUS ACTION AGAINST THESE FRAUDELENT PRACTICES IN THE PAST. THIS TYPE OF BEHAVIOR IS UNACCEPTABLE AND ACTION WILL BE TAKEN AGAINST THESE BUYERS THRU EBAY POLICIES ... moreBY REPORTING THEM TO EBAY IMMEDIATELY. HERE AT ARPI MACHINE SALES, WE REALIZE MOST PEOPLE ARE HONEST AND DO NOT PRACTICE TECHNIQUES MENTIONED ABOVE. BY THE SAME TOKEN WE ARE COMMITTED 100% TO PROVIDE SUPERIOR CUSTOMER SERVICE TO ALL. THANK YO 818 298 9685 EMAIL: WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION OKUMA MC3-V CNC VERTICAL MILL CONTROL ARM FOR CAROUSEL THEIS CAME OFF A 1986 OKUMA MC3V CNC VERTICAL MILL CAN SEPARATE IF INTERESTED A COUPLE. THEY SELL FOR ABOUT $350 EACH NEW. CALIFORNIA BUYERS TO PAY 9.75% SALES TAX SHIPPING& HANDLING: SHIPPING BY UPS IN THE 48 CONTINENTAL STATES. PAYMENT INSTRUCTION: Payment can be made with paypal. Business or personal check or wire transfer. All payments must be received by Arpi Machine Sales within 7 days. Payments must be sent to ARPI MACHINE SALES at 12165 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 298-9685 or by e-mail. TERMS AND CONDITIONS: If payment is not received within 7 days. ARPI MACHINE SALES has the right
|
|
|
BRIDGEPORT VMC 3016 CNC Mill w/ TROYKE 4th axis Rotary Table Vertical Fanuc, 760
BRIDGEPORT VMC-3016-XV 4 AXIS CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: SERIAL NUMBER 21i-0319 TABLE SIZE 45" x 16" MAXIMUM TABLE LOAD 2000 LBS X AXIS TRAVEL 30" Y AXIS TRAVEL 16" Z AXIS TRAVEL 20" RAPID TRAVERSE RATE X.Y, Z AXES 826 IPM CUTTING FEED RATE 0.1- 500 IPM SPINDLE TAPER CAT 40 SPINDLE SPEEDS 50- 6000 RPM SPINDLE MOTOR(2-SPEED GEARBOX) 12 HP TOOL CHANGER CAPACITY 20 STATION MACHINE WEIGHT. APPROX. 11.400 LBS MACHINE DIMENSIONS. APPROX. 86" x 68" x 102" H EQUIPPED WITH: GE FANUC 21iM CNC CONTROL. TROYKE FULL 4th AXIS ROTARY TABLE w/9" CHUCK& TAIL, RS-232C PORT INTERFACE FOR DNC OPERATION. FULL CONVERSATIONAL PROGRAMMING, 4TH AXIS PREWIRE WITH DRIVE, 2-SPEED GEARBOX SPINDLE, COOLANT SYSTEM W/TANK& PUMP, FULLY ENCLOSED GUARDING. ALL AVAILABLE MANUALS*VIDEO AVAILABLE ... moreUPON REQUEST* LOCATION: OUR WAREHOUSE; UNDER POWER. FRANKSVILLE, WI(NEAR MILWAUKEE. WI) You are welcome to inspect. Run, and listen to this VERY CLEAN mill prior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer with inventory on site at our Franksville. Wisconsin facility, and on site equipment available nationwide. Our staff haas a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We have several hundred relationships with various sources of used machinery& equipment available worldwide and can both provide and locate superior used machining tools like: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, EDM, drill chuck, ironworker, turret punch, welder, tube bender. Whether you are in the market to sell your surplus equipment or purchase that hard-to-find machine. We have a knowledgeable staff that will strive to deliver quality products and services based on your needs, a
|
|
|
MILLTRONICS MB20 VERTICAL CNC TOOLROOM MILL
MILLTRONICS MODEL MB20 Centurion 6 CNC Control TABLE SIZE: 54" X 16" TRAVELS: 4- X 20" X 24" HORSE POWER: 10 QUILL DIAMETER: 4.125" WEIGHT: 7.000# Machine can be seen under power here on our floor. Please feel free to contact us with any questions. Thanks for looking!
|
|
|
OKADA VM500 CNC Vertical Machining Center Mill, Fanuc Rigid GearBox Spindle VMC
OKADA VM500 CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: MANUFACTURE DATE 1984 TABLE SIZE 35.4" x 19.9" MAXIMUM TABLE LOAD 990 LBS SPINDLE NOSE TO TABLE TOP 5.5" 27.6" X AXIS TRAVEL 27.6" Y AXIS TRAVEL 16.9" Z AXIS TRAVEL 24.8" RAPID TRAVERSE RATE X. Y, Z AXES 472 IPM SPINDLE TAPER BT 40 SPINDLE SPEEDS(2-SPEED GEARBOX) 60- 6000 RPM SPINDLE MOTOR 7.5 HP TOOL CHANGER CAPACITY 20 STATION ATC MAXIMUM TOOL WEIGHT 13 LBS WEIGHT. APPROX. 10.400 LBS DIMENSIONS. APPROX. 82"L x 94"W x 98"H EQUIPPED WITH: FANUC 6M CNC CONTROL, RS-232C PORT INTERFACE FOR DNC OPERATION, COOLANT SYSTEM WITH TANK& PUMP, PARTIAL ENCLOSED GUARDING. WORK LAMP, ALL AVAILABLE MANUALS*VIDEO AVAILABLE UPON REQUEST* LOCATION: OUR WAREHOUSE; UNDER POWER. FRANKSVILLE, WI(NEAR MILWAUKEE. WI) You are welcome to inspect. ... moreRun, and listen to this mill prior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer with inventory on site at our Franksville. Wisconsin facility, and on site equipment available nationwide. Our staff haas a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We have several hundred relationships with various sources of used machinery& equipment available worldwide and can both provide and locate superior used machining tools like: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, EDM, drill chuck, ironworker, turret punch, welder, tube bender. Whether you are in the market to sell your surplus equipment or purchase that hard-to-find machine. We have a knowledgeable staff that will strive to deliver quality products and services based on your needs, and assist you from start to finish. We don't just want your business; we want your repeat business. Thank You. Bid With Co
|
|
|
2008 Chevalier QP2026L Vertical CNC Mill Fanuc Control
Ready to showcase and show quality with real part. It is powered up and ready. Machine has recently gone through maintenance and minor service. The shop has run nothing but aluminum on it. This machine is listed direct from shop. The reason for selling is because the shop is looking to acquire lathe. This machine has produced great quality for us; Tolerance of +- 0005. For rigging. Buyer will need to assure forklift. Weight is 11000 lbs. Please see specifications of machine in picture list. Also. Please e-mail me if you have any questions. Along with machine. We have contacts for service outside of manufacturer in case it is ever needed(sharp and in-depth repairman that will fix any issues) Thank you. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-144e8e733f3-0x110-
|
|
|
HAAS TM-1 CNC TOOL ROOM MILL VMC VERTICAL MACHINING CENTER
HAAS TM-1 CNC TOOL ROOM MILL VMC VERTICAL MACHINING CENTER Specification TABLE SIZE: 47.5"x10.5" X-AXIS TRAVEL: 30" Y-AXIS TRAVEL: 12" Z-AXIS TRAVEL: 16" RAPID TRAVERSE RATE X. Y: 200 IPM RAPID TRAVERSE RATE Z: 200 IPM SPINDLE TAPER: CAT 40 SPINDLE SPEEDS: 6000 RPM SPINDLE DRIVE MOTOR: 7.5 HP MAXIMUM TOOL DIAMETER: 3.5" MAXIMUM TOOL WEIGHT: 12 Lbs. FLOOR SPACE REQUIRED: LxWxH) 85"x64" MACHINE DIMENSIONS: APPROX. 85"x64" NET WEIGHT: APPROX. 3300 LBS Auctions over $500.00 must pay by wire transfer within 48 business hours from auction close. Payment must be received by our bank within 72 business hours after auction closes. If payment terms are not met. Item will be re-listed or offered to the under bidder without further notice. This machine has been serviced regularly& well maintained ... moreand ready to go to work for you! You can email me with any questions& thanks for looking at my auction!
|
|
|
Haas VF CNC Vertical Machining Center Mill Milling Machine Coolant Tank Metal
Haas VF CNC Vertical Machining Center Mill Milling Machine Coolant Tank Sheet Metal. Pictured is whats for sale you get it as is. Whats pictured is all thats part of this auction. Local Pick up or/Shipping is 100% on the buyer.
|
|
|
10" x 50" Southwestern ProtoTRAK Model TRM CNC Vertical Mill, S/N 97-760 (1997)
5433- Southwestern Proto TRAK CNC Vertical Mill Manufacturer: Southwestern Proto TRAK Model: TRM S/N: 97- 760 Year: 1997 Specifications: Table Size 10" x 50" Longitudinal Table Travel 30" Cross Saddle Travel 17" Vertical Head Travel 23.5" Spindle Speeds(Variable) 70- 4.200 RPM Spindle Nose#40 Spindle Quill Travel 5" Spindle Quill Feeds(3) 0.002" 0.004" 0.006" Spindle Nose To Table 0" 24" Spindle Counter To Column Face 17.3" Max Work Piece Weight 1.320 Lbs. Dimensions(L x W x H) 68" x 64" x 95" Weight 4.100 Lbs. Equipped With: Trax MX2. 2 Axis CNC Control(Installed 2007) 3 Axis Digital Readout In Manual Mode Kurt Power Draw Bar One Shot Lube System Way Guards Coolant System Hardened& Ground Box Ways Horsepower: 3 Location: Huntington Park.CA BUYER IS RESPONSIBLE ... moreFOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. No warranties expressed or implied. Please call 323-587-1887 for an inspection appointment or questions. Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a w
|
|
|
9" x 49" Doall Model GMP 200S CNC Vertical Mill, S/N 091212009C
INDUSTRIAL ASSETS MACHINERY IS PLEASED TO OFFER FOR YOUR CONSIDERATION: REFERENCE# 5438 Doall CNC Vertical Mill MODEL: GMP 200S S/N: 0912009 Specifications: Table Size 9" x 49" Longitudinal Table Travrel 30" Cross Saddle Travel 12" Vertical Knee Travel 16" Spindle Speeds(Variable) 60- 4.200 RPM Spindle Nose R- 8 Spindle Quill Travel 5" Spindle Quill Feedd(3) 0.006" 0.003" 0.0015" Ram Travel 12" Dimensions(LxWxH) 6' x 7' x 7' Weight 2.300 Lbs. Equipped With: Trax M2. 2 Axis CNC Control(Installed 2004) 3 Axis Digital Readout In Manual Mode Kurt Power Draw Bar Auto Lube System Battery Back Up Horsepower: 3 Location: Huntington Park. CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. ... morePlease call 323-587-1887 for an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon
|
|
|
2007 Doosan VT1100 CNC Vertical Lathe Boring Mill
Doosan VT1100. Specification. Description. DATE OF MANUFACTURE 2007 MAXIMUM SWING 50" MAXIMUM TURNING DIAMETER 43.3" MAXIMUM WEIGHT ON CHUCK 4.409 LBS TABLE/CHUCK DIAMETER 32" MAX TURNING HEIGHT 39.37" X AXIS TRAVEL 22.8" Z AXIS TRAVEL 39.37" RAPID TRAVERSE RATE X AXIS 787 IPM RAPID TRAVERSE RATE Z AXIS 787 IPM TABLE SPEEDS 5- 850 RPM TABLE SPEED RANGES 2 SPEED GEARED MAIN MOTOR 75 HP TURRET CAPACITY 12 STATIONS TOOL CHANGE TIME(1 STATION) 2 SECONDS ELECTRIC POWER SUPPLY 220V 3PH 90KVA APPROX DIMENSIONS 112" x 130" x 158" MACHINE WEIGHT(APPROX) 49.000 LBS Equipped With: FANUC OiTB CNC CONTROL WITH 9" CRT SCREEN RS-232C INTERFACES FOR DNC OPERATION 32" HEAVY DUTY 3-JAW CHUCK CHIP CONVEYOR STANDARD COOLANT SYSTEM WITH TANK& PUMP FULLY ENCLOSED SPLASH& SAFETY GUARDING ALL AVAILABLE ... moreTOOL BLOCK HOLDERS& MANUALS Dave Slifka. 4404399850. PRICE: $250.000. FOB: my floor. Rigging on your double drop permitted truck approx. 2000-2500. Machine paid for before it moves. This Machine is in the Cleveland Ohio area at a local tool and die shop. Rigging Is not included. If you have any question about this machine call me 440 439 9850 Dave Slifka.
|
|
|
Haas VF 1 CNC Vertical Machining Center Mill 7500 rpm 3 axis w/ 4 axis drive VMC
HAAS VF-1 CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: TABLE SIZE 26" x 14" MAXIMUM TABLE LOAD 3.000 LBS SPINDLE NOSE TO TABLE TOP 4" 24" X AXIS TRAVEL 20" Y AXIS TRAVEL 16" Z AXIS TRAVEL 20" RAPID TRAVERSE RATE X. Y& Z AXES 710 IPM CUTTING FEED RATE 0.1- 500 IPM SPINDLE TAPER CAT 40 SPINDLE SPEEDS 0- 7.500 RPM SPINDLE MOTOR 10 HP TOOL CHANGER CAPACITY 20 STATION ATC MAXIMUM TOOL WEIGHT 12 LBS WEIGHT, APPROX. 8.000 LBS DIMENSIONS. APPROX. 110" x 93" x 99" EQUIPPED WITH: HAAS CNC CONTROL WITH 12" MONITOR, RS-232C PORT INTERFACE FOR DNC OPERATION, RIGID TAPPING(SYNCHRONOUS/ SOLID TAPPING) 4TH AXIS DRIVE& WIRING, PROGRAMMABLE COOLANT NOZZLE. CHIP AUGER. FLOPPY DISC DRIVE, COOLANT SYSTEM WITH TANK& PUMP, FULLY ENCLOSED GUARDING. ALL AVAILABLE MANUALS*VIDEO AVAILABLE UPON ... moreREQUEST* LOCATION: OUR WAREHOUSE; UNDER POWER. FRANKSVILLE, WI(NEAR MILWAUKEE. WI) You are welcome to inspect. Run, and listen to this mill prior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer with inventory on site at our Franksville. Wisconsin facility, and on site equipment available nationwide. Our staff haas a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We have several hundred relationships with various sources of used machinery& equipment available worldwide and can both provide and locate superior used machining tools like: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, EDM, drill chuck, ironworker, turret punch, welder, tube bender. Whether you are in the market to sell your surplus equipment or purchase that hard-to-find machine. We have a knowledgeable staff that will strive to deliver quality products and services based on your needs, and assist yo
|
|
|
Miltronics Partner CNC Vertical Mill Model No. 00 3 H.P.
MILTRONICS"PARTNER" CNC VERTICAL MILL 3 H.P. Model No. 00. Serial Number 2075. Date o Mfg. 1998. Table Working Surface 10" X 50" Table Travel(X Axis 36" Table Travel(Y Axis 15-16" Millslide Travel(Z Axis 6" Knee Travel Manual Adjustment 16" Quill Travel 5" Spindle Motor H.P. 3 H.P. Maximum Table Load 750 Lbs. Infinitely Variable Spindle Speeds 60-4200 R.P.M. Spindle Taper R-8. Rapid Traverse Rate 200 I.P.M. Electric 3/60/230 V. Weight Approximately 3.000 Lbs. Equipped With: Dynapath Delta Autocon CNC Controls W/Conversational Graphics. This is a 2 Axis CNC Machine. Much heavier than a standard Bridgeport Mill. It came right from Service and should go back to work for you. We are going to sell this Miltronics"Partner" CNC Vertical Mill Model No. 00 3 H.P. for $5.000. USD. We will send ... morethe buyer an email with payment instructions. Payment to be in the form of a cashier's check, money order or wire transfer. International buyers will need to use a customs broker. Buyer to pay freight. Ask one of your local trucking companies for a LTL, Less than load) rate from zip 48003. Our rigging and loading fee for this machine is FREE. We load weekdays between 8 am and 2 pm onto an open top truck. No van loading. Should you have any questions. Please feel free to contact us at(248) 892-5233 weekdays between 7 am& 4 pm EST. Time is money. Payment to be made within 5 business days of award and shipment within 7 days. MUST SELL. WE REALLY NEED THE ROOM. Beware of fraudulent second chance offers. Please contact us direct with any concerns. We will not offer any second chance offers. If anyone contacts you. Including eBay, it is not us.
|
|
|
Cincinnati Hypro Vertical Boring Mill 169" CNC with Elevating Rail
Cincinnati Hypro Vertical Boring Mill 169" CNC with Elevating Rail Cincinnati Hypro VTL. Fanuc 18iT Control, 144" Table 43 RPM Z-Axis Ram Stroke: 40" 60" Turning Height. 169” swing This machine is rebuilt. Including new table bearings. All ways newly scraped and flaked. Will be available for inspection All items located in the Southern California office. Questions. Please contact us Rhett@rhettandcompany.com or 909-261-4416 We will load all items at no charge. Pick up available or buyer pays freight. You may arrange your own shipping or we will arrange shipping for you through Freight Quote. We will ship within three business days after receiving payment. If necessary. Sales tax and shipping cost will be added to selling price. Returns accepted within 14 days for full refund. Buyer pays return freight. All items subject ... moreto prior sale. Payments Accepted: PayPal. MasterCard, Visa and American Express. Checks ok, we will ship after the funds have cleared. Thank you for your interest. All items are sold“as is” Items are described to the best of our knowledge. We make no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
20" x 60" Cincinnati CNC 5 Axis Hydrotel 4 Spindle Vertical Mill
More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website REC#2770& 2771(1) Used Cincinnati CNC 5 Axis Hydrotel 4 Spindle Vertical Mill Specifications: Table Size.83 3/4" x 22 5/8" Approx. Dimensions.118" x 163" x 131" H Weight. FOB.Casa Grande. AZ*Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 ... moreused metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, straight-side, straightening& extrusion) press brakes, apron/finger/box& pan brakes, blast cleaners, air compressors, boring mills(both horizontal& vertical) chip conveyors, coil equipment(consisting of reels, straighteners, feeders, cradles& levelers) CMM's, parts washers, radial arm drills, drill presses, dust collectors, generators, transformers, grinders(tool& cutter, universal, surface, drill) lathes(vertical, horizontal, wheel) ovens, furnaces, process equipment, hydraulic pumps, turret punches, ironworkers, plate rolls, power hack saws, bandsaws, shapers, planers, shears, threaders, vibratory finishers, welders, welding prepositioners, as well as forklifts, cranes, and material handling equipment. We also specialize in all types of saws– extended height vertical band/plate saws, horizontal band type, power hack, and many types of custom table/feed sawing system
|
|
|
*HUGE* _ Rambaudi Ram Sag CNC Vertical Mill Milling Machine FIDIA Control
PLEASE NOTE! MACHINE MUST BE SOLD! Email for more information! CLICK HERE to Email Nu Tek Sales! This listing is for a Rambaudi Ram Sag CNC Milling Machine with Fidia Control. The machine is in Plant and under power now for your inspection! It has no known problems and is being replaced with a machining center! Email for more information or photos and videos by clicking here: Please check out our Feedback. We are straight shooters! NOTE* Top Bidder to pay actual rigging/ loading charges estimated at $5000.00. OUR RETURN POLICY. Unit is being sold for a customer. Inspection encouraged as there is no 30 day return on this item! Good Luck.
|
|
|
1995 HURCO BMC-30D VERTICAL MACHINING CENTER, CNC MILL
NICE HURCO BMC-30D Specification Description X-Axis Travel 30″ Y-Axis Travel 17.8″ Z-Axis Travel 23.8″ Tool Positions 24 ATC Spindle Speed 7000 RPM Spindle Taper 40 Taper Horse Power 15 HP Equipped With: Autocon Dynapath Delta 20 cont High Torque 15 HP Motor Machine is under power ready for inspection sold as is
|
|
|
1997 HURCO BMC-30HTD VERTICAL MACHINING CENTER, CNC MILL
NICE HURCO BMC-30HTD WE HAVE 2 IN STOCK Specification Description X-Axis Travel 30″ Y-Axis Travel 17.8″ Z-Axis Travel 23.8″ Tool Positions 24 ATC Autocon Dynapath Delta Control machine is in good working condition come and see it under power sold as is we are not responsible after the machine live our building No Paypal Payments Cash Check or Cashiers Check
|
|
|
2014 Haas VF-3SS 5 Axis CNC Vertical Machining Center / Mill + TR-160 Trunion
For sale is a fully loaded VF-3SS + 5 Axis Trunion that was manufactured at the end of May. 2014 and was placed into service with us at the end of June. Price from Haas was $149,500($162,000 after tax) and there is a 2 month waiting list to get these right now. Unfortunately when we ordered this we were busy, but 2 months later when they finally delivered it to us we no longer have enough work to keep it busy. This listing is for a combination of both the VF3-SS and TR-160 5 Axis Trunion. We may consider selling them separately but prefer not to. This machine is in perfect condition. And under factory warranty until June, 2016. If you have any questions feel free to call 714-657-88 thirty-three. It's powered up and in service in Santa Ana, CA. No dealer inquiries. We are not desperate to sell this so please don't lowball. Again, NO ... moreDEALERS! eBay requries us to list PayPal as an option for payment but obviously we can't accept paypal for this type of transaction. On a side note. If you are cross shopping this with the VF-2SS TR, don't get the VF2. The VF-2 does not have enough Z axis travel to let you do much of anything with the 5 axis trunion on the table, which is why we use the VF-3 which has an extra 5 inches of clearance. We have two other identically configured VF-3s that work great. Machine is a VF-3SS with the following options: TR-160 160 mm(6.3" Tilting 2-Axis Trunnion Rotary Table. With scale feedback on the A(tilting) axis. Requires Haas mill with 4th- and 5th-axis drives for true 4th- and 5th-axis operation. Scale feedback functional only on Haas mills with software version 18.xx or later. Scale feedback does not function with rotary control box. $ 32.595 TSC: This high-pressure coolant system provides up to 300 psi(21 bar) of coolant to the cutting edge for heavy cuts. Higher feedrates, deep hole drilling and better surface finishes. $5.995.00 ACF: This 25-micron. 2 bag-type filter system removes contamination and minute particles from the coolant before they can be recirculated
|
|
|
LAGUNMATIC KMC 310 3 AXIS CNC VERTICAL MILL, NEW 1997
LAGUNMATIC KMC 310 3 AXIS CNC VERTICAL MILL SERIAL# 37958 MFG BUILT DATE 10-10-1997 GENERAL SPECS FROM CATALOGUE Machine: KMC 310 Table size 50” x 10” 1.270 x254 mm) Table Travel(X axis) 27” 685 mm) Table Saddle(Y axis) 15” 381 mm) Table Quill(Z axis) 6 ½” 165 mm) Knee travel 16” 406 mm) T-slots Three 5/8” on 2-1/2” centers(3-0.62 on 63 mm) Spindle: Spindle motor 7-1/2 HP(5.5 kW) 30 min. duty rating) Spindle taper#40 NMTB Speed range 55– 4.250 RPM Quill diameter 4-3/8” 110 mm) hardened Machining Capacity: Workpiece weight 1.000 lbs. 453 kg) Max. distance: spindle to table 18 ¼” 476 mm) Drilling- mild steel 1 ½” diameter(25 mm) Milling- mild steel 8 cubic ipm(131 cm 3 pm) Positioning accuracy ±0.0004” ±0.01 mm) Repeatability ±0.0001” ±0.002 mm) Input resolution 0.0001” 0.002 mm) Output resolution 0.0001” ... more0.002 mm) Rapid traverse(X and Y axes) 200 ipm(5 mpm) Feedrate 0.1– 150 ipm(0.002– 3.81 mpm) Feedrate overrides 0– 150% all axes) Standard Machine Features: Leadscrews Precision. Zero-backlash, preloaded ball type Spindle bearings Three. Super precision Castings Close-grained Meehanite Coolant Flood coolant built in General Data: Floor space 93” x 77” x 96” 2.3 x 1.9 x 2.4 m) Weight 4.000 lbs. 1,814 kg. 5 HP MOTOR 230 VOLT 3 PHASE 60HZ FOB: HOPKINS MINNESOTA 55343- SELLING AS IS- WE CAN ASSIST IN SHIPPING QUESTIONS PLEASE CALL KINGSMEN MACHINERY 952-890-2419
|
|
|
Hurco Hawk 40 Vertical CNC Mill / Milling Machine 40” x 20” travels Year 2000
HURCO HAWK 40 CNC VERTICAL MILL 40”X) X 20”Y) X 20”Z) Description: Up for sale is a Hurco Hawk 40 Advantage Series CNC Vertical Bed Mill. This mill is in good working and operating condition. It features a Hurco Ultimax SSM CNC control. 40” X) 20”Y) 20” Z) travels, and a maximum spindle nose to table clearance of 23.5” 600mm) The rapid traverse rates are as followed: X-Axis 400ipm, Y-Axis 400ipm, and Z-Axis 250ipm. This machine requires 3 phase 230V power to operate. SPECIFICATIONS MANUFACTURER HURCO MODEL HAWK 40 SERIAL H40H-05000100000 POWER REQ 230V 3 PHASE TRAVELS: X-AXIS…40” Y-AXIS…20” Z-AXIS…20” RAPID TRAVERSE: X-AXIS…400IPM Y-AXIS…400IPM Z-AXIS…250IPM FOR MORE INFORMATION PLEASE CALL GARY AT(510) 453-0513 FOR MORE INFORMATION PLEASE CALL GARY ARAGON AT 510 453-0513 LOCATED AT 601 ALADDIN AVENUE. SAN LEANDRO. CALIFORNIA 94577* TERMS ... moreAND CONDITIONS* SALES Your bid is a contract. Place a bid only if you are serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within three days of the end of the auction, or if payment isn’t received within three days of the invoice date, item may be offered to the next highest bidder or re-listed at the sellers’ discretion. Please do NOT pay until you are invoiced! PAYMENT TERMS Gary S. Aragon. LLC accepts ATM and these major credit cards: Visa, MasterCard, Discover. Buyers may call us at 510 453-0513 with credit card information. You can also use PayPal. PayPal payments should be sent to garysaragon(at) comcast.net. CALIFORNIA STATE SALES TAX APPLIES TO ALL STATE RESIDENTS… unless we receive a valid resale card. EBAY TERMS eBay charges Gary S. Aragon. LLC a service charge for each item we list. If a customer cannot or does not pay for an eBay purchase in the specified amount of time, Gary S. Aragon, LLC will file a non-paying bidder alert with eBay. Gary S. Aragon LLC will hold the non
|
|
|
MORI SEIKI MV45/40 VERTICAL MILL CNC MACHINE
VIDEO ARPI MACHINE SALES CORPORATION 12165 BRANFORD STREET SUITE F SUN VALLEY CA 91352 OFFICE: 818 890-7625 VERY IMPORTANT! PLEASE READ. AFTER PURCHASING THIS OR ANY OTHER ITEM FROM US. PLEASE LEAVE POSITIVE FEEDBACK AND GIVE US A 5 STAR RATING IN ALL 4 CATEGORIES. IF YOU HAVE ANY PROBLEMS WITH YOUR ORDER, PLEASE CALL US AT THE OFFICE IMMEDIATELY(BEFORE LEAVING FEEDBACK) AND WE WILL TRY TO RESOLVE ANY ISSUES YOU HAVE. FURTHERMORE, WE MARK ALL OF OUR ITEMS TO PREVENT ANY DISHONEST EBAYER FROM TRYING TO EXCHANGE OUR ITEM WITH THEIR OLD/NON WORKING ONE AND THEN ATTEMPT TO SEND BACK TO US BY CLAIMING IT AS NON WORKING IN ORDER TO RECEIVE A REFUND. THIS HAS HAPPENED SOMETIMES AND WE HAVE TAKEN SERIOUS ACTION AGAINST THESE FRAUDELENT PRACTICES IN THE PAST. THIS TYPE OF BEHAVIOR IS UNACCEPTABLE AND ACTION WILL BE TAKEN AGAINST THESE BUYERS THRU ... moreEBAY POLICIES BY REPORTING THEM TO EBAY IMMEDIATELY. HERE AT ARPI MACHINE SALES, WE REALIZE MOST PEOPLE ARE HONEST AND DO NOT PRACTICE TECHNIQUES MENTIONED ABOVE. BY THE SAME TOKEN WE ARE COMMITTED 100% TO PROVIDE SUPERIOR CUSTOMER SERVICE TO ALL. WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION WE ACQUIRED THIS MACHINE A FEW MONTHS AGO FROM A COMPANY THAT WAS SELLING THEIR SURPLUS. THE MACHINE IS IN EXCELLENT RUNNING CONDITION. THE PREVIOUS OWNER TOLD US IT CUT ALUMINUM 85% OF THE TIME. IT'S A VERY SMOOTH MACHINE AND HAS NO ISSUES. EVERYTHING IN THE PICTURES ARE INCLUDED SUCH AS ALL OF THE TOOLING ON THE FLOOR. THE VICE ON THE STEVENS ENGINEERING TABLE, THE RENISHAW TS-27 PROBE AND THE MANUALS ALONG WITH THE TANK. THE MACHINE HAS RIGID TAPPING AND AN RS232 PORT. YOU'LL BE VERY PLEASED WITH THIS MACHINE AND IT WOULD BE IDEAL FOR A GARAGE AS WELL. YOU ARE WELCOME TO COME FOR INSPECTION OR SEND A TECHNICIAN ON YOUR BEHALF. ONCE THE MACHINE IS PURCHASED. WE WILL DO THE FOLLOWING AT NO EXTRA COST. BLOCKING HEAD AND TABLE. SHRINKWRAPPING THE MACHINE. TARPING ON TRUCK. AND OF COURSE LOADING ONTO A FLATBED. NO TOOLING IS INCLUDED BUT WE HAVE MANY CAT40 TOOL HOLDERS
|
|
|
MORI SEIKI MV45/40 MV 45/40 FANUC CNC VERTICAL MILL MACHINING CENTER HAAS VIDEO
VIDEOS ARPI MACHINE SALES CORPORATION 12165 BRANFORD STREET SUITE F SUN VALLEY CA 91352 OFFICE: 818 890-7625 WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION WE ARE SELLING THIS MACHINE FOR ONE OF OUR VALUED REPEAT CUSTOMERS. IT'S A GOOD RUNNING MILL EVEN THOUGH THE Y AXIS IS A BIT LOUDER THAN THE X AND Z. IT HOLDS GOOD TOLERANCE WHEN CUTTING PARTS THE MACHINE HAS AN RS232 PORT AND ALL OF THE MANUALS. IT USES CAT 40 TOOLING UNLIKE MANY OF THIS VINTAGE MV45 MODELS. VICES ARE NOT INCLUDED IN THE SALE BUT CAN BE PURCHASED AT $350 EACH. YOU'LL BE VERY PLEASED WITH THIS MACHINE AND IT WOULD BE IDEAL FOR A GARAGE AS WELL. YOU ARE WELCOME TO COME FOR INSPECTION OR SEND A TECHNICIAN ON YOUR BEHALF. ONCE THE MACHINE IS PURCHASED. WE WILL DO THE FOLLOWING AT AN ADDITIONAL COST OF $350. BLOCKING HEAD AND TABLE. SHRINKWRAPPING THE ... moreMACHINE. TARPING ON TRUCK. AND OF COURSE LOADING ONTO A FLATBED. NO TOOLING IS INCLUDED BUT WE HAVE MANY CAT40 TOOL HOLDERS AVAILABLE FOR SALE. THANK YOU AND BUY WITH CONFIDENCE. REGARDS ARPI MACHINE SALES CORPORATION WILL HELP YOU LOCATE A GREAT RATE FOR TRANSPORTATION. SPECIFICATIONS: SPECS SUBJECT TO VERIFICATION. Specifications Description TABLE, 17-3/4"x 43-3/8" WORK ENVELOPE, 31.5"X x 18"Y x 20"Z, AUTOMATIC TOOL CHANGER, 20 STATIONS, CONTROL, FANUC 6M, SPINDLE SPEED, 6000 RPM, SPINDLE TAPER, Cat 40, Dimensions, 128"L x 117"W x 110"T, Weight, 17.000 LBS, ARPI MACHINE SALES is a machine tool and a parts dealer located in southern California. In the city of Sun Valley CA(only 20 mins north of Downtown Los Angeles. We specialize in cnc machinery including cnc lathes and mills. We also have a large inventory of used Fanuc, Yasnac, Okuma, Mitsubishi and other control parts, including spindle drives and servo drives for cnc machines with various controls. So please call us if you are in need of any parts for your machines. We have experienced huge growth in our company in the last few years as we continue to strive to provide excellent cu
|
|
|
LAGUN FTV-2S CNC VERTICAL Knee MILL 10" x 50" DC Servos VFD
Lagun USA cnc DC servo driven mill with allen bradley bandit 4 controls and quality SEM DC servo drives with encoders. variable frequency spindle. Fully operational cnc controls. This machine has low hours and was in a non production. Prototyping environment. Has nearly all the features desired in a vertical machining center. Ready for the following upgrade software breakout board hardware/software options: 1.Kflop+kanalog and Kmotion software $500(mach3 plugin is free. Software additional) 2.Pico Systems and linuxcnc About $600(EMC2 software and plugin are free with a huge online support community for beginner setup) 3.Ajaxcnc and mach 3 4.Centroid cnc pkg Only selling because I bought 2 cnc machines for a tech shop and now decided to keep busy with work and wait til retirement to play gadgeteer. Will assist in loading onto a truck or professional ... moretransportation on site.
|
|
|
Tormach PCNC 1100 PCNC1100 Vertical CNC Mill
I am selling my Tormach PCNC 1100. I am not a machinist and did not find the time to learn. I purchased the machine two years ago and have not used it at all. I did purchase a number of bits and quite a bit of aluminum stock but never got around to using it. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14826131ee1-0x116-
|
|
|
1995 HURCO BMC-30HTD VERTICAL MACHINING CENTER, CNC MILL
NICE HURCO BMC-30HTD Specification Description X-Axis Travel 30″ Y-Axis Travel 17.8″ Z-Axis Travel 23.8″ Tool Positions 24 ATC Autocon Dynapath Delta Control machine is in good working condition WE NEED TO MOVE THIS MACHINE BY OR BEFORE SEPTEMBER 26TH BUYER IS RESPONSIBLE FOR SHIPPING AND SHIPPING ARANGEMENTS WE CANNOT LOAD THIS MACHINE WE CAN HELP YOU HIRE A RIGGER TO LOAD IT FOR YOU THIS MACHINES ARE IN GOOD WORKING CONDITION BUT SOLD AS IS PLEASE COME SEE THEM BEFORE YOU BID
|
|
|
Matsuura 800V CNC Vertical Mill
Matsuura 800 V 1986. Machine runs great, perfect for job shop to handle a variety of materials, gear drive machine, holds 30 BT-40 tools. Upload and download programs. Currently under power in aerospace job shop, we need the room for additional machines, or we would keep this one. MX2 control. Spindle Chiller. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-14999a8e93c-0xfd-
|
|
|
Mori Seiki MV-55 50 Taper CNC Vertical Machining Center Mill, Fanuc VMC cat chip
MORI SEIKI MV-55/50 CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: DATE OF MANUFACTURE 1986 TABLE SIZE 55" x 21.7" MAXIMUM TABLE LOAD 2.200 LBS SPINDLE NOSE TO TABLE TOP 9.8" 31.5" X AXIS TRAVEL 40.1" Y AXIS TRAVEL 21.7" Z AXIS TRAVEL 21.7" RAPID TRAVERSE RATE X. Y, Z AXES 394 IPM CUTTING FEED RATE 0.1- 196 IPM SPINDLE TAPER CAT 50 SPINDLE SPEEDS 20- 3.500 RPM SPINDLE MOTOR(2 SPEED GEARED) 15 HP TOOL CHANGER CAPACITY 24 ATC MAXIMUM TOOL WEIGHT 33 LBS WEIGHT. APPROX. 19.800 LBS DIMENSIONS. APPROX. 133"L x 111"W x 131H" EQUIPPED WITH: FANUC 11M CNC CONTROL, RS-232C PORT INTERFACE FOR DNC OPERATION, GEARBOX SPINDLE. SIDE-MOUNT TOOL CHANGER, CIRCULAR INTERPOLATION. MASSIVE Z-AXIS COLUMN, CHIP CONVEYOR. RIGID TAPPING, SPINDLE CHILLER(SPINDLE OIL/LUBE COOLING SYSTEM) 3) COOLANT NOZZLES AROUND ... moreSPINDLE FLANGE, COOLANT SYSTEM WITH TANK& PUMP, TABLE ENCLOSED GUARDING. ALL AVAILABLE MANUALS*RIGID BOX WAY CONSTRUCTION* LOCATION: OUR WAREHOUSE; UNDER POWER. FRANKSVILLE, WI(NEAR MILWAUKEE. WI) You are welcome to inspect. Run, and listen to this mill prior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer with inventory on site at our Franksville. Wisconsin facility, and on site equipment available nationwide. Our staff haas a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We have several hundred relationships with various sources of used machinery& equipment available worldwide and can both provide and locate superior used machining tools like: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, EDM, drill chuck, ironworker, turret punch, welder, tube bender. Whether you are in the market to sell your surplus equipment or purchase that hard-to-find machine. We
|
|
|
Hurco KM3P Vertical CNC Mill 1998
1988 Hurco KM3P CNC Vertical Mill Specifications: Accuracy: +.001”12” Repeatability: +.0005in. Resolution: 000050in. Rapid traverse positioning rate for X. Y and Z axes: 1 to 250ipm programmable Programmable feed rates for x and Y axes: 0.1 to 100 ipm in 0.1 ipm increments Battery back–up(guard against: 72 hours or greater for complete protection control Computer memory loss) Physical and Drive Limits Table dimensions(standard) 49in. x 14in T-slots(3) 2.56in. centers T slot size: 625in. Longitudinal table travel(X axis) 24in. Cross table travel(Y axis) 14in. Vertical quill travel(Z axis) 5.00in. Knee travel: 15.5in. Table load(max. with uniform Distribution: 660lbs. Vertical distance to remove tool holder: 2.5in Height: 83” Width: 99” Depth: 101” Weight: 3800lbs Spindle motor: 3 hp AC Spindle speeds(60-4000) Continuously variable 60-500rpm ... morelow range 500-4000rpm high range Frequency: 47-63 Hz Impulse Voltage: 200% Peak Voltage Drop 20% reduction for 1 cycle or 50% reduction for ½ cycle Radio Frequency Voltages: 2% RMS above 10KHZ Located in Indiana CNC Machines.Net 844-262-6789 Please contact Brian Paladino 844.262.6789 with any questions or concerns. WE are NOT a transportation company. We are NOT equipped to properly rig this item. We do have experience in helping hundreds of our customers finding the right sources and assist in helping them through the process of preparing. Rigging and shipping to their facility. CNCMachines.Net has the right to resell the item if not paid in full, all items are subject to prior sale. TERMS& CONDITIONS: he following terms and conditions(these"Terms and Conditions" are agreed to by CNCMachines.Net(CMN” and the purchaser(Purchaser" CMN's acceptance of any order is subject to these Terms and Conditions. No contrary. Additional or different terms, provisions or conditions shall be binding on CMN unless accepted by CNC in writing. 1. PAYMENT TERMS: Purchaser must pay purchase price in full prior to shipment. Terms of payment are net cash in United Sta
|
|
|
HURCO Hawk 40 (2001) 3 Axis CNC Vertical Mill, Ultimax Controller
2001 HURCO HAWK 40/ DSM. 3 Axis CNC Vertical Milling Machine with Ultimax Controller One-Owner machine is in excellent mechanical condition. Has rarely been used in the last 5-years, and is being sold to make room for new equipment. I am not a used machinery dealer. Hurco technician has evaluated this machine for a problem with the video monitors. Informed us that the machine required a new video card and possibly(2) new LCD monitors. These items are available on eBay for ~$400-500 and are easily replaced(we can replace them for an additional charge) Buyer is responsible for loading and pick-up at our Lake Zurich. IL facility. Loading docks and large drive in doors are available. Specifications are as follows: Mfg. E-40193 Year: May 2001 S/N: H40M-05002051BD HURCO Ultimax CNC Controller with Conversational Programming Yaskawa Drive Amplifiers ... more5-Hp Spindle Motor 3.800 RPM CAT 40 Taper Power Draw Bar 58” x 13” Work Table Coolant System 230V. 60Hz, 3-Phase Weight is ~5.500# Dimensions are ~6’ D x 8’ W x 8’ H Contact me with any questions or to arrange inspection of machine at our Lake Zurich. IL facility. Machine is being sold as-is/where-is. And is subject to prior sale. Specifications are based on the best information I have and should be confirmed by the buyer prior to purchase. See my other listings(some are there. Some will be coming very soon) for more machinery we are getting rid of, including: Hurco BMC-40 Mill, 2) Hurco KM-3P Mills, Charmilles Robofil 300& 310, Charmilles RoboForm 30, Charmilles Form 2-LC, and a large assortment of System 3R Tooling. Thanks for looking!
|
|
|
HURCO BMC-40 (1993) 3 Axis CNC Vertical Mill, 30 Tool Changer, Ultimax 3 Ctrl
1993 HURCO BMC 40. 3 Axis, CNC Vertical Milling Machine, Ultimax 3 Controller, 30 Tool Changer One-Owner machine is in good mechanical condition. Has rarely been used in the last 5+ years, and is being sold to make room for new equipment. I am not a used machinery dealer. Only known issue is that there is a problem with the automatic tool changer losing tool position count. Buyer is responsible for loading and pick-up at our Lake Zurich. IL facility. Loading docks and large drive in doors are available. Specifications are as follows: Model# BMC-40 Year: 1993 S/N: ZE9003053N Hurco Ultimax 3 CNC Controller with Conversational Programming MAX TWO V2 Drive Amplifiers 10-HP Spindle Motor CAT 40 Taper 30-Tool Automatic Tool Changer Heavy Box Way Construction 22” Z Travel 27” x 51” Work Table Coolant System 480V. 60Hz, 3-Phase Weight is Unknown ... moreDimensions are ~ 8’ x 10’ x 10’ Contact me with any questions or to arrange inspection of machine under power at our Lake Zurich. IL facility. Machine is being sold as-is/where-is. And is subject to prior sale. Specifications are based on the best information I have and should be confirmed by the buyer prior to purchase.
|
|
|
Milltronics RW20 Vertical Machining Center Mill, BOX WAY, 40 x 20, CNC Cat 40 RW
MILLTRONICS RW-20 CNC VERTICAL MACHINING CENTER GENERAL SPECIFICATIONS: DATE OF MFG 2000 TABLE SIZE 47.2" x 17.7" MAXIMUM TABLE LOAD 1000 LBS X AXIS TRAVEL 40.01" Y AXIS TRAVEL 19.51" Z AXIS TRAVEL 21.51" RAPID TRAVERSE RATE X& Y AXES 1000 IPM CUTTING FEED RATE 0.1- 500 IPM SPINDLE TAPER CAT 40 SPINDLE SPEEDS 50- 8000 RPM SPINDLE MOTOR 18 HP TOOL CHANGER CAPACITY. TOOLS(24) SIDE-MOUNTED POCKET-ARM WEIGHT. APPROX. 9.400 LBS DIMENSIONS. APPROX. 124"L x 97"W x 102"H EQUIPPED WITH: HIGH SPEED CENTURION 6 CNC PC BASED CONTROL, ETHERNET& RS-232C PORTS INTERFACE FOR DNC OPERATION. FULL CONVERSATIONAL PROGRAMMING. 3-D GRAPHICS, REMOTE JOG HANDWHEEL. FLOPPY DISK DRIVE, SIDE-MOUNTED POCKET-ARM AUTO-TOOL CHANGER, FANUC G-CODE COMPATIBLE, COOLANT SYSTEM W/TANK& PUMP, FULLY ENCLOSED GUARDING. ALL AVAILABLE ... moreMANUALS, MADE IN THE USA*RIGID BOX WAY CONSTRUCTION* LOCATION: OUR WAREHOUSE; UNDER POWER. FRANKSVILLE, WI(NEAR MILWAUKEE. WI) You are welcome to inspect. Run, and listen to this VMC prior to auction end. Feel free to email or call me at 262-895-3462 or sales@mwmachinery.com for any questions you may have; including shipping quotes. Midwest Machinery Inc. is a stocking CNC& Manual used machine tool dealer with inventory on site at our Franksville. Wisconsin facility, and on site equipment available nationwide. Our staff haas a combination of machine tool experience in both fabricating and metal cutting machinery, as well as CNC equipment. We have several hundred relationships with various sources of used machinery& equipment available worldwide and can both provide and locate superior used machining tools like: boring mill, lathe, grinder, turning centers, vertical& horizontal machining center, brake press, hydraulic shear, EDM, drill chuck, ironworker, turret punch, welder, tube bender. Whether you are in the market to sell your surplus equipment or purchase that hard-to-find machine. We have a knowledgeable staff that will strive to deliver quality products a
|
|
|
BEAVER NC5 CNC VERTICAL MILL 24" X 10"
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA and Canada. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we accept Paypal. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. Items are being sold as pictured; we will ... morenot sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 01150770005 Manufacturer: BEAVER Description: BEAVER NC5 CNC VERTICAL MILL 24" X 10" Capacity: 24" X 10" Model Number: NC5 Serial Number: 14879/5 Additional Information: INCLUDES CONTROL. SIEMENS SINUMERIK FANUC ELECTRICAL CONTROL BOX A02B-0051-0101, AND SECOND ELECTRICAL CONTROL BOX BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JASON LOCKETT 20001 EUCLID AVE EUCLID. OH 44117 216-906-4002 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest respons
|
|
|
2004 HAAS MINI MILL CNC VERTICAL MACHINING CENTER. SUPER CLEAN & LOADED W TOOLS
2004 Haas Mini Mill CNC Vertical Machining Center Description: In fantastic condition both working& cosmetically. Loaded with features including a single phase input power. 10-position ATC, Rigid Tapping, Tooling and more. Spindle& axes run super smooth on this machine. This machine was well taken care of. Back by our 30-day return privelege. Check out our feedback& bid with confidence! Below is a short video of the machine under power: Haas Mini Mill CNC Vertical Machining Center Manufacturer: Haas Model: Mini Mill S/N: 34710 Year: 2004 Specifications: X/Y/Z Travels 16" 12" 10" Spindle nose to table 4.0- 14" Table 36" x 12" Max table load 500 lbs Spindle motor 7.5 HP Spindle Speeds 0-6000 rpm Max torque 33 ft-lb@ 1.200 rpm Spindle Taper CT-40 X/Y/Z Rapid Rates 600 ipm Max cutting feed rates 500 ipm ... moreTool Changer Capacity 10 Max tool diameter 3.5" Max tool weight 12 lbs Tool to Tool change time 3.6 sec Input Voltage 220V. 1PH Machine weight 4.500 lbs Equipped With: Rigid Tapping Coolant System Spindle Load Meter 10 Tool holders USB to RS232 Interface The above information is to the best of our knowledge from sources deemed reliable. But should be verified at the time of inspection to confirm accuracy. Quoted prices do not include applicable sale taxes or freight costs. Email us with any technical questions you may have or email with zip for a freight quote. CA residents subject to sales tax. Freight and removal are the responsibility of the buyer. Local Pick-up ok. We will help load small items at no charge Feel free to contact us TOLL FREE@ 888-440-4460 or Email Us( We are conveniently located@ 2430 Cypress Wy. Fullerton. CA 92831 Hours: M-F 7:30AM- 4:30PM Saturday by appointment only GENERAL TERMS: By Purchasing equipment from Rohner Machinery Sales. Inc. the buyer agrees to all the terms and conditions listed and any other terms expressly added to this invoice. PRICES: All Prices are in U.S. Currency(Dollars) Prices are exclusive of state. County or federal taxes.
|
|
|
Lagun Vertical Mill Milling Machine With Hasbach Summit CNC Control W/ Collets
You are Bidding on: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Lagun Vertical Mill Milling Machine With Hasbach Summit CNC Control Comes with Set of Collets Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Please see pictures for additional details. I guarantee my sales. If I have missed something or the item is not as I described. Let me know within 5 days after you receive it and send it back to me in the same condition you received it for a full refund, less shipping. You can contact me at phone: 818) 441- 8941 if you have any questions. Sales Tax: A 8.00% sales tax is applied to all orders shipped to California I really appreciate your bids. CLICK HERE TO SEE OUR OTHER GREAT AUCTIONS
|
|
|
HAAS VF-4SS CNC VERTICAL MILL, 50.20.25", 12000 RPM, 24 Tools, 30HP, (2008)
Champion Machinery. Inc. Quote Charlotte. NC(803)548-8000 Chicago. IL(630)584-8885 2008 HAAS VF-4SS Travel: X-Axis 50" Y-Axis 20" Z-Axis 25" Table Size 52" x 18" Spindle Speed 12.000 RPM Spindle Taper Cat 40 Spindle Motor 30 HP Spindle Nose to Table Top 4" 29" Spindle Torque 75 ft. lbs. Tools 24 Table Load Capacity 1750 lbs. Rapid Traverse Rates 1400 IPM Tool Change Time(T- T/ C- C) 1.6/ 2.2 Seconds Max Tool Diameter 3.5" Max Tool Weight 12 lbs. Machine Dimensions(L x W x H) 138.9" x 110" x 123.5" Machine Weight 13.300 lbs. FEATURES: HAAS 32-BIT CNC CONTROL 12" Color TFT 16MB Expanded Memory Fourth Axis Interface Wireless Intuitive Probing System(Tool& Touch Probes) 24 Position Side Mount Tool Changer 12.000 RPM Spindle Speed Programmable Coolant Nozzles High Speed Machining ... moreRigid Tapping High Intensity Lighting Chip Auger Green Indicator Light Mfg Date November 2007 Installed in February 2008
|
|
|
American CNC 310 Vertical Mill
Up for sale a very low hour American CNC 310 Vertical Milling machine. We purchased this machine in a package with some other equipment with the intent to use it at our shop. We wire it up and found a bad servo board right off the bat. After replacing the board we made several attempts to get the machine up and running. But we have been unable to do so. Largely due to machine knowledge and the resources available to us. At last the machine will start and function, but the Z and spindle would not. Feel free to ask questions and I'll do the best I can to answer. Below is the balance of the machine information. American CNC 310, year 1992 Serial# 31887 Allen Bradley 8400 Control Table: 50" x 10" Travel: X = 30" Y = 16" Z =10"
|
|
|
Haas VF4 1999, CNC Vertical Mill VF3, VF2
1999 Haas VF4 CNC Vertical Mill Specifications: Travels: X-Axis 50” Y-Axis 20” Z-Axis 25” Table Size 52” x 18” Max. Work piece Weight 3.500 lbs. Spindle Nose to Table 4” 29” Spindle Speed 7.500 RPM Spindle Taper CAT 40 Spindle Motor 20 HP Auto Tool Changer 20 ATC Max. Tool Length 9” Max. Tool Diameter 3.5” Max. Tool Weight 12 lbs. Tool Change Time 4.2 Seconds Chip to Chip Time 4.5 Seconds Machine Dimensions(LxWxH) 118” x 110” x 118” Machine Weight 13.300 lbs. Equipped with: Programmable Coolant Wired for 4th Axis S/N 18891. Located Huntington Park. CA CNCMachines.Net 844-262-6789 Please contact Curt Doherty 844.262.6789 with any questions or concerns. WE are NOT a transportation company. We are NOT equipped to properly rig this item. We do have experience in helping hundreds of our customers finding the right sources and assist in helping ... morethem through the process of preparing. Rigging and shipping to their facility. CNCMachines.Net has the right to resell the item if not paid in full, all items are subject to prior sale. TERMS& CONDITIONS: he following terms and conditions(these"Terms and Conditions" are agreed to by CNCMachines.Net(CMN” and the purchaser(Purchaser" CMN's acceptance of any order is subject to these Terms and Conditions. No contrary. Additional or different terms, provisions or conditions shall be binding on CMN unless accepted by CNC in writing. 1. PAYMENT TERMS: Purchaser must pay purchase price in full prior to shipment. Terms of payment are net cash in United States dollars. Prior to shipment, to CMN's place of business, unless otherwise specified on the accompanying"quote/invoice" form. Purchaser shall pay CNCMachines.Net(CMN" a late penalty on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Purchaser shall also be liable for any and all costs and expenses incurred by CMN arising out of or in connection with efforts by CMN to collect any unpaid amounts hereunder including, without limitation, attorney or collecti
|
|
 |