|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
$2000.00 Shipping Condition: Used Location: Aberdeen, United States Diehl 75 Straight Line Rip (SLR) Saw--The saw's chains are in great shape. The left and right chains are worn evenly. The landing on the teeth on the ... moreface of the chains is about 0.06". A new chains and track set would run you $12,000 or more if you bought a saw that had badly worn teeth on the chain.--Comes with strong, green alignment laser. It is clearly visible in full daylight.--All 4 speeds work well on the chain drive.--Just bought a new 18" blade a month ago for ripping a bunch of oak and hickory. It cuts through them like butter.--Comes with the older 14" blade that was on there previously. It cuts ok, but is not razor sharp like the new 18" blade.
Buy It Now
Condition: New Location: Beaver Falls, United States This ACCURA 03212 straight line rip saw is a beast of a machine! Multiple anti-kickback devices ensure safe feeding of timber. Side and rear guards ensure ... moreoperator safety. Has a large handwheel for adjusting rise and fall of cutting blade.
1d 2h 4m 17s 0 bids
$12610.00 Now
$1500.00 Shipping Condition: Used Location: Oxford, United States Mattison 404 Straight Line Rip Saw Model# MasterRip Totally Reconditioned MATTISON 404 STRAIGHT LINE RIP SAW 20 HP 3.430 RPM direct drive arbor motor ... more14" diameter saw blade capacity 4" maximum thickness. 24" throat depth overhead cutting design with single cast chain links automatic chain oil lubrication(1) row of top anti-kickback fingers 2 HP feed motor with(4) speeds of 62. 93, 124 and 186 FPM; top roller holddown 72" x 60" table Glue joint saw Voltage: 460/60/3 phase HTTP:WWW.REARDONMACHINERY.COM OR CALL: 239-947-0348 OR 239-250-1528 Posted with
Buy It Now
Condition: Used Location: Toledo, United States This is super clean diehl sl52 straight line rip saw. The chain is very sharp and practically new. This saw has low use and has been meticulously maintained. ... moreThese saws are hard to find and won't last long at this price. Get it while you can! Buyer to set up shipping. We will load it on a flatbedat no additional charge.
Buy It Now
Free Shipping Condition: Used Location: Bennet, United States Diehl 72 straight line rip saw 13" long handle 3/4" bored holes. 55-59 casting number. 2-3/4” center to center holes. 1-1/4” thickness at holes.
Buy It Now
Condition: New Location: Blaine, United States The 303S automatically feeds the material for consistent rip results. The cast iron feed chain runs on double V guide rails and holds the material firmly ... morefor precision straight cutting. A powerful 10 HP motor with maximum 12” blade provides a cutting depth up to 3.35”.
Buy It Now
Condition: Used Location: Pico Rivera, United States This is a Straightline Single Bottom Rip Saw in working condition. Precision built saw head ensures accuracy for straight line rip saw operations. Four ... morepressure rollers for precise cutting of large and small workpieces.
Buy It Now
Condition: Used Location: Toledo, United States Mattison Straight line Rip Saw This unit was in service until the local shop closed. Delivery available to certain locations please ask. ~~ Model 202 ... more~~ 15 HP 3 phase~~ 1 1/2" diameter arbor. 4" maximum depth of cut, overhead arbor design 12" minimum stock length. 24" maximum rip cap to the right of the blade 77" x 65" table size Please read auction terms: This equipment is surplus and has not been tested. It's being sold as is. Items not paid for within 4 business days will be relisted* Please inquire about our PayPal policy BEFORE paying using these methods* Our preferred payment method is wire transfer or company check PLEASE allow a week for corporate processing of payment AND 4 to 5 days processing after payment is received Invoices will be provided Subject to prior sale Shipping prep and charges are responsibility of the purchaser All freight shipments require a complete address. A contact name, a contact phone number and a contact email. Freight shipments also require your indication of'Business with a dock' Business without a dock' and whether there is a forklift/ pallet jack available or if you require'Residential' delivery. Freight quote is based on the information that you supply to us. Michigan residents add 6% sales tax without a resale certificate As is. Where is FOB Midland. MI Mid-Michigan Industrial Surplus. LLC For existing feedback on EBay see our established electrical company Potential Electrical Supply. Both companies are located on the North side of Midland Michigan at 3045 and 3063 E. Mercantile Drive easy access on and off of US-10 Eastman road exit. Mid-Michigan Industrial Surplus. LLC statement regarding the equipment we sell: Information regarding the history and condition of the equipment we offer has been included exactly as it has been received in the description of the property. Normally. The property has not been operated or tested by Mid-Michigan Industrial Surplus, LLC to determine its fitness for a purpose. The Property is s
Buy It Now
Free Shipping Condition: Used Location: Bennet, United States 2006 yr 230/460/575V 3 PH 110/220V 1 PH. See pictures for details. Rip saw ran a 15 HP and a 2 HP motor.
Buy It Now
Condition: New Location: Blaine, United States We are an authorized dealer of Cantek and are always happy to provide assistance in picking the best machine for you. Precision straight line feeding ... morefor parallel and accurate rip cuts. Soft start – Star Delta starter reduces the amp draw on startup.
Buy It Now
Condition: New Location: Blaine, United States We are an authorized dealer of Cantek and are always happy to provide assistance in picking the best machine for you. Precision straight line feeding ... morefor parallel and accurate rip cuts. Absolute straight line feeding with glue joint to 13 ft.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States H5749 Laser Guide & Stand For G0524 Rip Saw. Optional laser guide with arm for G0524 Straight Line Rip Saw.
Buy It Now
Condition: New Location: Blaine, United States We are an authorized dealer of Cantek and are always happy to provide assistance in picking the best machine for you. Precision straight line feeding ... morefor parallel and accurate rip cuts. Powerful 20HP saw motor for even the most demanding rip applications.
Buy It Now
Condition: Used Location: Fresno, United States industrial straight line rip saw. Works as it should. Will deliver within a reasonable distance from coshocton ohio. #sawmill #woodworking #saw #heavy ... moreequipment
Buy It Now
Condition: Used Location: Hughesville, United States Model 202 Straight Line Rip Saw 15HP. 220/440V 3 phae Questions call 319-232-8184 Buyer is responsible for all freight and loading charges. Buyer is responsible ... morefor arranging freight.
Buy It Now
Condition: Used Location: Huntington Beach, United States DIEHL - 750. Straight Line Rip-Saw. 18" blade 15hp straight line rip saw. Specifications: -- 15 HP - 3,450 Direct drive arbor motor, 2" dia. -- 18" Blade ... morecap., 4" max. depth of cut, 12" min. part length.
Buy It Now
Condition: Used Location: Huntington Beach, United States DIEHL MODEL SL52 STRAIGHT LINE RIP SAW. DIEHL SL-52 Straight Line Rip Saw. — Automatic lubrication of feed chain & race. — Adjustable rip fence. Equipped ... morewith & Features:– Cast iron pressure bar arms with ball bearing rollers.
Buy It Now
Condition: Used Location: Scottsburg, United States Diehl 750 Straight Line Rip Saw #FML.
Buy It Now
Condition: Used Location: Hughesville, United States Mattison 404 Straight Line Rip Saw Model# MasterRip Totally Reconditioned MATTISON 404 STRAIGHT LINE RIP SAW 20 HP 3.430 RPM direct drive arbor motor ... more14" diameter saw blade capacity 4" maximum thickness. 24" throat depth overhead cutting design with single cast chain links automatic chain oil lubrication(1) row of top anti-kickback fingers 2 HP feed motor with(4) speeds of 62. 93, 124 and 186 FPM; top roller holddown 72" x 60" table Glue joint saw Voltage: 460/60/3 phase HTTP:WWW.REARDONMACHINERY.COM OR CALL: 239-947-0348 OR 239-250-1528 Posted with
|
|
|
|
Mattison Straight Line Rip Saw Woodworking In line diehl powermatic
Mattison Straight line Rip Saw This unit was in service until the local shop closed. Delivery available to certain locations please ask. ~~ Model 202 ~~ 15 HP 3 phase~~ 1 1/2" diameter arbor. 4" maximum depth of cut, overhead arbor design 12" minimum stock length. 24" maximum rip cap to the right of the blade 77" x 65" table size Please read auction terms: This equipment is surplus and has not been tested. It's being sold as is. Items not paid for within 4 business days will be relisted* Please inquire about our PayPal policy BEFORE paying using these methods* Our preferred payment method is wire transfer or company check PLEASE allow a week for corporate processing of payment AND 4 to 5 days processing after payment is received Invoices will be provided Subject to prior sale Shipping prep and charges are ... moreresponsibility of the purchaser All freight shipments require a complete address. A contact name, a contact phone number and a contact email. Freight shipments also require your indication of'Business with a dock' Business without a dock' and whether there is a forklift/ pallet jack available or if you require'Residential' delivery. Freight quote is based on the information that you supply to us. Michigan residents add 6% sales tax without a resale certificate As is. Where is FOB Midland. MI Mid-Michigan Industrial Surplus. LLC For existing feedback on EBay see our established electrical company Potential Electrical Supply. Both companies are located on the North side of Midland Michigan at 3045 and 3063 E. Mercantile Drive easy access on and off of US-10 Eastman road exit. Mid-Michigan Industrial Surplus. LLC statement regarding the equipment we sell: Information regarding the history and condition of the equipment we offer has been included exactly as it has been received in the description of the property. Normally. The property has not been operated or tested by Mid-Michigan Industrial Surplus, LLC to determine its fitness for a purpose. The Property is s
|
|
|
Diehl E-55 Straight Line Rip saw Used Woodworking
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! FOR ALL QUESTIONS PLEASE CONTACT US WITH ANY QUESTIONS 925-872-0929 OFFICE CSWAFFORD925@GMAIL.COM THIS MACHINE IS LOCATED IN OUR FACILITY AND HAS PASSED AN ALL POINTS INSPECTION AND READY TO SHIP! Used Diehl Model#55 Heavy Duty Straight Line Rip Saw machine. 15HP 3-Phase Main Motor, Cast Iron Base, Running Condition, Call or email for more details! Make OFFER! Rating: Fair, Contact Information: 925-872-0929 Cswafford925@gmail.com Financing Available Payment Methods: Visa. Mastercard, Amex, Check, Cash Location: California Please contact for Terms and Condition We offer no warranties on the sale of used equipment. However. We do guarantee that the machine will be in good working condition upon delivery to your facility. We will ship Via Air Ride Flat Bed. Across the entire United ... moreStates, and Canada. International Shipping as well. Please contact us for a freight rate. Auction Bid does not include Shipping Price, or Sales Tax if Applicable. On Nov-15-09 at 10:04:49 PST. Seller added the following information: On Aug-03-10 at 12:47:12 PDT. Seller added the following information: Use the FREE Counters 1 million sellers do- Vendio!
|
|
|
2004 HIGH POINT Straight Line Rip Saw HPR-12 (Woodworking Machinery)
BUYER MUST EMAIL PRIOR TO PURCHASE FOR ACCURATE FREIGHT& CRATE CHARGES High-Point Straight Line Rip Saw w/Laser Line Model: HPR-12 Year: 2004 Condition: Excellent Rating: 3) Used/Tested Replacement Cost: $ Not Available Technical Specifications: 460V. 60CY, 15HP 18" Width Capacity Variable Infeed Rate Heavy Duty Cast Iron Chain Anti-Kickback Fingers Cast Iron Adjustable Fence All specifications are listed to the best of our knowledge. Please email with any questions prior to purchase. Machine Ratings: 1) New Surplus: Equipment or parts are new. 2) Demo/Floor Model: Demonstration use only. Like new. 3) Used/Tested: A complete test/cycle was performed and no issues were found. 4) Used/Pulled/Good: Pulled from a working unit. And because of proprietary design, the complete working unit was de-manufactured, and the parts sold. 5) Used/Untested: ... moreItems that we did not test or cannot test. This item was received by us as an individual part or integrated equipment that could not or was not tested. Payment: Please do not submit payment until you receive a final invoice with all applicable charges. Should you submit payment without shipping. Handling charges, and applicable tax you will receive a separate invoice. Items will not be shipped until invoice is paid in full. Paypal is the preferred method of payment. Please email for alternate methods of payment should you wish to pick-up your item in person. Payment is expected within 5 business days from the date of sale. If payment is not received within 5 business days. The item will be re-listed and a non-paying bidder alert will be submitted to eBay. If you will not be able to submit payment within the 5 day period, please notify us immediately. We may be able to offer an extension. This arrangement is on a case by case basis. Shipping: Buyer is responsible for all shipping. Crate, freight charges, and any applicable taxes. Items will be shipped within 10 business days from the date payment is received/cleared. A tracking number will be provided upon shipment of
|
|
|
Scmi gang rip saw straight line saw
I have an scmi gang rip saw sure exactly what year they made them for many years on this model. Was fully operational when taking out of service clean machine has wear but if u know how these machines operate u know they will probably out last your grandchildren and mine italian made by scm group. Please feel free to contact me with any questions buyer is responsible for pick up I can arrange a forklift if needed thanks call 913 486 0681
|
|
|
SHODA Straight line Rip saw
SHODA. Japan Straight Line Rip Saw with manual feed arrangement. Excellent working condition. Original equipment installed in a well known Cabinet shop. Well maintained. Ideal for any Cabinet shop. Offered at bargain Price. Technical Details: Category: Rip Saws- Straight Line Brand/Model: SHODA"RS 163-S" Machine Type: Straight Line Rip Saw Year of Mfg: 1995 Condition: Very Good Condition Elect.Voltage: 220 V. 60 Cy, 3 Ph
|
|
|
Mattison 404 Straight Line Rip Saw Model #: MasterRip
Mattison 404 Straight Line Rip Saw Model# MasterRip Totally Reconditioned MATTISON 404 STRAIGHT LINE RIP SAW 20 HP 3.430 RPM direct drive arbor motor 14" diameter saw blade capacity 4" maximum thickness. 24" throat depth overhead cutting design with single cast chain links automatic chain oil lubrication(1) row of top anti-kickback fingers 2 HP feed motor with(4) speeds of 62. 93, 124 and 186 FPM; top roller holddown 72" x 60" table Glue joint saw Voltage: 460/60/3 phase HTTP:WWW.REARDONMACHINERY.COM OR CALL: 239-947-0348 OR 239-250-1528 Posted with
|
|
|
DIEHL SL-52 GLUE LINE CAPABLE STRAIGHT LINE RIP SAW *** EXCELLENT CONDITION!!!
HELPING YOU BUY WITH CONFIDENCE 100% POSITIVE FEEDBACK SINCE 1999_ DIEHL SL-52 GLUE LINE CAPABLE STRAIGHT LINE RIP SAW Shopping for a straight line rip saw can be difficult especially if you need it to be glue line capable. A vast majority of straight line rips saws for sale on the market not only are not glue line capable. But are worn so badly that they pose an increased risk for kick back due to wear. The chain and track on this machine are in excellent plus condition and glue line capable. Please refer to the pictures and judge for yourself. The chain face sits dead flat and runs parallel which is very critical for accurate cuts. A new chain and track cost just under $10,000 so it is crucial you purchase a straight line with a good chain and track. This saw is in excellent condition and boasts large capacities and speeds. The fence can ... morebe set at 52″ to the right of the blade or you have 56″ of clearance to the right of the blade if you do not use the fence. Arbor has less than 1/1000″ run out. Oiler works properly at all points. Machine runs quiet, true, and smooth. Add to this that it is a very clean machine and you have a machine that is hard to find at this price point especially when talking about US built rip saws. 15 hp main motor/2 hp feed motor with speeds from 65-190′ per minute. Arbor diameter is 2″ The max blade diameter is 18″ which will yield a 4 1/4″ thickness capacity. Terms& Conditions: 1. Please ask all questions before bidding. 2. Winning bidder will pay actual freight charges. We do not make money off of freight. Insurance, packaging, or crating. We will be glad to get you a freight quote. We also offer third party insurance to insure that freight is covered if damaged in transit at a cost of $40 per $10.000 of cove
|
|
 |