|
Vintage Bell Machine Company Dowel Machine 10HP 440v
Vintage Bell Machine Company Dowel Machine 10HP 440v The 10HP Motor and the machine must be bolted to the floor. V-belt not included Flat belt is included. Serial No. 9669 This machine can run 5/8" 1-1/4" and 1-1/2" Westinghouse 10 HP Motor. 440 Volt Master 1 HP Electric Motor. 3 Phase WEIGHT: 2000 lbs. 0213.2 AB) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ... moreATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEM
|
|
|
DOWEL Machine Made by Ring Master USA / Cabinetmakers Tool !
Dowel machine made by Ring Master in the USA This machine Drills 2 Holes 1" apart at the same time. It clamps the wood you are drilling with a air powered clamp. For doweling cabinet pieces together. Uses Air from your compressor and 110 volt Electric Measures aprox 27 1/2" x 12" Original Cost Aprox $1300.00 This was used by a Cabinet Maker Works great!
|
|
|
Glover Dowel Machine
Glover Dowel Machine for sale in good condition. With this Dowel machine dowels will not need sanding. This machine will make three and one quater dowels in one pass. It also has knives for one and a quater, three quater, three eights and three quater lincoln logs. Will run on three phase 220 or 440. Call 505-620-0355 with any qustions, thank you.
|
|
|
Bell Machine Gluer and Dowel Driver Machine Woodworking
Bell Machine Dowel Machine Click on Image to enlarge First off. If you are looking at this, you probably know more about what it does than me. This was removed from a working shop and is operable. I have not even cleaned off the sawdust and glue. It is a Bell Machine Gluer and Dowel Driver Machine. The number on the side I assume indicate the center sizes 3/4" to 3" Someone has written in magic marker on the side of the guard in 1/4"increments. I have never seen it run or know its precision. I assume nothing is wrong with it, the gentleman who owned the plant said it was working until sold. He going out of business. Click on each picture and it will enlarge. Here are the specs: Serial No. = 26268, Frame = 66, H.P. = 1/2, RPM = 1725, Voltage = 220/400 3 phase, This item is heavy. Shipping via truck freight will be rather expensive ... morebut we do have a dock and forklifts to assist. Shipping will be your costs. You are more than welcome to pick this item up at our Walnut Cove, NC(27052) location during normal business hours. JOETLC.com Good Luck and Happy Bidding! ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13fb36901a8-0xfb-
|
|
|
BRUSA DOWEL MACHINE
BRUSA DOWEL MACHINE IN EXC CONDITION VERY LITTLE USE 1/4 TO 2" 220 VOLT 3 PHASE Description BRUSA DOWEL MACHINE Preliminary specifications subject to verification. Additional information will be posted as it becomes available. Terms and Conditions: This item is being sold“As is. Where is” No returns or exchanges. The buyer is responsible for verifying the condition and operational functions. Sale must be completed within 7 days of purchase otherwise sale is considered delinquent. Please provide the following information: Complete company information: address. Contact person, phone number, fax number, destination address if different then company address already provided. Payment Options: 10% via PayPal. Balance via Bank To Bank Transfer Full Payment via Bank To Bank Transfer Credit Cards with 3% Service Fee PayPal or Credit Cards ONLY ... moreaccepted for transactions below $500 Additional charges: Trucking. Palletizing or loading/ securing into overseas container Packaging. Skidding, crating and loading could be an additional charge depending on the nature of the item and what is required for shipping. Please contact us and let us know what services you need quoted.
|
|
|
Gannomat Index 130 Logic 2012 Dowel Drilling and Inserting Machine
Gannomat Index 130 Logic 2012 Dowel Drilling and Inserting Machine CNC Controlled Glue/Water Injection System Category: Wood Working Sub Category: Other Stock No. 5001 Age: 2012 Location: Fullerton. CA. Dowel Diameter 0.24" 0.31" 0.39" Dowel Length 0.98" 1.97" Table Width 51.18" Referencing Stops 4 Zones 4 Clamping Cylinders 8 Pneumatic Max. Work Piece Thickness 3.15" Min. Work Piece Length 2.76" Boring Unit Single Spindle Horizontal Spindle Speed 3000/5000/8000 RPM Motor 0.65 kw X-Axis NC Controlled Max. Working Width 51.18" Max. Travel Speed 105m/minute Z-Axis Manual Set. by Digital Counter Position from Worktable 0.20" 1.57" Boring Depth 0- 1.38" Closed Gluing System 6 Bar Glue Pressure Equipped With: CNC Controlled. Glue/Water Injection System, and Dowel Insertion. Price… $39.500.00*Bank ... moreREPO*Make Offer* Subject to Banks Acceptance and Release* Contact Information: ACT Machinery 714-441-1992 PLEASE SEE TERMS AND CONDITIONS BELOW Machines are subject to ACT Inc’s terms& conditions below and notes: The goods sold are second hand goods and ACT. Inc. Therefore makes no warranty of any kind, and sells goods“As is, As inspected, And“With all faults” ACT, Inc. makes no warranty of any kind whatsoever, specifically any warranty of merchantability or fitness for a particular purpose. ACT, Inc. disclaims any reliance by buyer on ACT Inc’s skill, or judgment to select or furnish the goods for any particular purpose, expressed or implied. Customer is responsible for all shipping& rigging costs. STANDARD TERMS AND CONDITIONS OF SALE TERMS: All payments must be received within 10 business and prior to shipment of machine. All sales in CA are subject to applicable federal. State, and local use, sales and excise taxes which the Buyer agrees to pay, and which will be billed as part of the selling price, or separately, if the Seller is required by any taxing authority to collect and pay such a tax. PAYMENTS: We will email you an invoice for the full amount owe
|
|
|
Hawker 1000 Dowel Machine
Contact seller at trainum24@att.net to arrange inspection and for shipping options.
|
|
|
Accu- Systems Dowel Woodworking Machine Gluer
Tested.Insert and glue dowel,continuous feeding of dowels and glue,everything works ok. Posted with
|
|
|
Gannomat Selekta 252 dowel insertion machine inserter woodworking accu-systems
In great condition Inserts glue or water and 8mm dowel Gun receiver just rebuilt by Tritec industries Contact with any questions Upgraded to cnc dowel inserter and do not have any room or need for this machine. Always worked great 110v single phase
|
|
|
cheng feng cf-60 dowel making machine
this machine was working when job was finished I have a few different cutterheads and spare parts for machine parts are available for this machine.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1444a50a75b-0xf3-
|
|
|
Glover Moulder Dowel Machine
This Glover Dowel machine can make 3" and 1&3/8" dowels in one pass. This machine comes knives for various sizes. Please feel free to email with any questions we also have other machines avilable.
|
|
|
Table leaf multiple dowel Boring machine
A-306 4 horizontal spindles 4 vertical spindles air hold downs runs good custom made heavy machine for multiple boring We accept checks. No Paypal. Check out- classicmachineworks.com Thanks
|
|
|
Hawker Dayton Dowel Cutting Machine
Machine ran good when I disconnected it about 7 years ago. It has a 10 HP motor 3 phase 220/440volts 1800RPM This machine was kept as a back up. It comes with several assorted dies and feed rollers. The knives are adjustable from 1/4" 2" dowel. We always made our sq stock 1/8" bigger than desired size.
|
|
|
Gannomat Selekta 252 Dowel Gluer and Inserter Insertion Machine Woodworking
For sale is a Gannomat Selekta 252 Dowel Gluer and Inserter in good working condition. This machine has the standard pistol that glues and inserts the dowels and an extra pistol used for thick glue. You can change between the guns with the flip of a switch. Also included are two rebuild kits(extra nozzles. Pistons with carbide needles, and o-rings) for the glue injectors on each gun. This machine has castors so it can be moved between work areas quickly and easily. Here is a video of how the machine works: Please check my 100% feedback and buy with confidence! I am willing to assist with shipping as long as the buyer makes the arrangements and pays for all shipping costs. I have a forklift to load it at no additional cost.Thanks for looking!
|
|
|
Gannomat Elite 25 Dowel Insertion Machine
Gannomat Elite 25 Fully automatic drilling and dowel inserting machine for simultaneous drilling. Gluing and dowel inserting. Model 410. Great working order. Clean machine-well cared for 2000 model year Complete with manuals. Fences, some glue, dowels Buyer to arrange for shipping.
|
|
|
Accu-systems Model DD Hand Held Wood Dowel Inserter Glue Machine Will Ship
Accu-systems Model DD Hand Held Wood Dowel Inserter Glue Machine Will Ship. In good looking and working condition, 110v, comes as shown in pictures. We treat items we are selling as items we are buying! Thank you and good luck bidding! Please contact if you have any questions. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-1478c675a4f-0x114-
|
|
|
Ayen Magnum Glue Dowel Machine
Year 2001. Ayen dowel inserting gun | Glue pot | Roller wheels | Gauges | s/n 0126681 | additional charge for palletizing, forklift available
|
|
|
Ritter 801 Horizontal Boring Machine Used Woodworking Machinery,Dowel, 4 spindle
Ritter 801 Horizontal Boring Machine. Can bore 1 to 4 holes at a time. single phase 1 hp Leeson motors, 3450 rpm. air clamping and feed. with extra bits. For local pickup in Dekalb Il 60115 or buyer arranges shipping, I have and dock and forklift and will load at no charge. questions scott 815-260-7629
|
|
|
Accu-Systems Glue & Dowel Insertion Machine Model DD Inserter Woodworking 110 V
i000000. Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Just one of inkFrog's Creations: Description Accu-Systems Dowel Insertion Machine Model: DD Serial# 006-04-DD-2 110-220V. 60Hz, 1Ph Dowel Diameter Range: 5mm- 10mm Dowel Length Range: 25mm- 38mm Machine Dimensions: 18" X 26" X 32"H Vibrating Hopper This machine is in great clean working condition. You have our guarantee. LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES ARE GIVEN OR IMPLIED. ALL ITEMS CAME FROM A WORKING ENVIRONMENT WHAT YOU SEE IN THE PICTURES IS EXACTLY WHAT YOU WILL RECEIVE ALL ITEMS ... moreMUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL NON FREIGHT ITEMS WILL BE SHIPPED WITHIN 1 BUSINESS DAY UPON RECEIPT OF PAYMENT. UNLESS OTHERWISE NOTED ALL FREIGHT ITEMS WILL BE SHIPPED WITHIN 3 BUSINESS DAYS RETURNS ARE SUBJECT TO A CASE BY CASE BASIS AND MUST BE WITHIN 7 DAYS OF RECEIVING THE SHIPMENT NEW YORK RESIDENTS ARE SUBJECT TO PAY 8.75% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE DON’T HESITATE TO ASK BEFORE THE END OF THE LISTING* THANKS– BUFFALO VINTAGE: Payment and Shipping Payment is expected with in 5 days of Auction end. We accept PayPal as well as more conventional options. We ship the next business day after payment is received. All our books are carefully packaged to avoid damage in transit and are shipped with delivery confirmation. Most items are shipped via USPS Media Mail but we also offer Priority Mail service. We will combine shipping when possible. inkfrog terapeak. InkFrog Analytics.
|
|
|
AYEN SKB 50 TWO HEAD 50 SPINDLE LINE BORING MACHINE DOWEL DRILLING
AYEN SKB 50 TWO HEAD 50 SPINDLE LINE BORING MACHINE DOWEL DRILLING. MADE IN 1988 THE BORING MACHINE IS IN GREAT WORKING CONDITION AND IS STILL UNDER POWER, IT HAS TWO 25 SPINDLE HEADS, ONE VERTICLE/ HORIZONTAL. AND ONE THAT DRILLS UP FROM THE BOTTOM. IT IS 3 PHASE 230V. PLEASE LOOK AT ALL OF THE PICTURES SO YOU CAN SEE THE CONDITION OF THE MACHINE. LOCAL PICKUP IS OK, THE MACHINE IS IN NEW JERSEY IT WILL SHIP VIA FREIGHT SO PLEASE EMAIL ME YOUR ZIP CODE AND IF IT IS GOING TO A HOUSE OR BUSINESS AND IF YOU HAVE A FORKLIFT FOR UNLOADING AND I WILL GET YOU A QUOTE.
|
|
|
4 Automatic Dowel Machine
This auction is for 4 Identical Automatic Dowel Machines. The machines are going as 1 lot. Machines are used. However each machine has newer electrical. There is one picture of the new electrical. They are still situated in the mill. The mill has been closed down about 1 year. There is a picture showing several dowels. This is an example of several dowels being made off one board. Roughly a 5 or 6 inch wide boards. That fit into the machine. The boards are approximately 4 feet long that are feed through the machines. The machines weight is approximately 3 or 4 tons a piece. There is a professional rigging company 15 miles from location if someone wants to hire one. If someone wants to come look at these or has any questions about these machines please call me at 207-357-4614. Ask for Richard Powell.
|
|
|
Schleicher DBS/ A25 25-Spindle/ Head Line Boring Machine Dowel Power Drill
Up for Sale is a Schleicher Model DBS/ A25- 25 Head/ Spindle Line/ Dowel Boring Machine! This has a 3 phase 220v motor. Power cord to motor has been cut. So you'll need to re-wire it. This unit is in good physical condition. However it looks to be missing the air compressor assembly. We are selling this unit AS IS/ AS PICTURED with no guarantee as to working condition. Please take a look at the pictures. And let us know if you have any questions! THIS WILL SHIP VIA FREIGHT. I CAN ESTIMATE THAT SHIPPING WILL COST AROUND $275. BUT PLEASE CONTACT ME FOR A FREIGHT QUOTE.
|
|
|
Stanley #77 dowel machine cutter 9/16"
This is the 9/16" cutter for the Stanley#77 dowel making machine. It is used but has a lot of knife left. Shipping on this item is free via USPS or UPS. I do combine shipping wherever possible. I do ship internationally. Just email me and I will quote shipping to your country. All shipments to Brazil must go Priority mail Express. All Brazilian shipping charges are on a quote only basis.
|
|
|
Stanley #77 dowel machine cutter 7/16"
This is the 7/16" cutter for the Stanley#77 dowel making machine. It is used but has a lot of knife left. Shipping on this item is free via USPS or UPS. I do combine shipping wherever possible. I do ship internationally. Just email me and I will quote shipping to your country. All shipments to Brazil must go Priority mail Express. All Brazilian shipping charges are on a quote only basis.
|
|
|
Stanley #77 dowel machine cutter 5/8"
This is the 5/8" cutter for the Stanley#77 dowel making machine. It is used but has a lot of knife left. Shipping on this item is free via USPS or UPS. I do combine shipping wherever possible. I do ship internationally. Just email me and I will quote shipping to your country. All shipments to Brazil must go Priority mail Express. All Brazilian shipping charges are on a quote only basis.
|
|