|
ANTIQUE MAYTAG MODEL 92 HIT AND MISS GAS ENGINE COIL TOWER COVER
Up for bid is a Maytag Model 92 coil tower cover. Note. It is the short version. The cover is in good shape. Although covered is a light coating of dirt and surface rust. It should clean up nicely with a wire brush angle grinder, it should sparkle. Shipping will be 3.00 for USPS Shipping Shipping will be combined as possible. Shipping will generally be on the next day after payment. Any questions Email me and thanks for looking! di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-14b5459b206-0x10a-
|
|
|
Maytag vertical crank shaft Vintage Gas Engine
This is the crank shaft for a vertical air cooled Mayted gas engine. It looks to be and mikes to be in very good condition. It is a used item but in very good condition. Pleas call me for any other questions. 402)786-7477
|
|
|
OLD MAYTAG GAS ENGINE PARTS FLYWHEEL MUFFLER CARB + ?
SHOWS USE AND AGE, RUST& PITTING, NO BREAKS OR WELDS, NEEDS SOME CLEANING SHIPPING COST $ 17.90 I DO COMBINE SHIPPING COST IF YOU BUY 2 OR MORE ITEMS AND I CAN FIT ALL IN ONE PACKAGE JUST ASK AND I CAN TELL YOU ALSO I WILL SHIP MOST ALL INTERNATIONAL, JUST ASK FIRST AND PAY ALL ACTUAL SHIPPING COST TO YOUR COUNTRY ALSO IF YOU SEE ITEMS ENDING AT A LATER DATE YOU LIKE, WAIT TO PAY, IF EBAY WILL LET YOU, IF NOT, I ALWAYS SEND BACK SHIPPING COST REFUNDS THROUGH PAY PAL FOR ALL OVER SHIPPING COST PAYMENTS THANKS AND HAVE FUN, TRAPPER Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Old Vintage Maytag Gas Engine 2 Cylinder Pulley
This pulley is in good condition. I describe all of my items to the best of my ability. If you have any question please email before bidding. If you buy more than 1 item I will combine shipping. You will want to wait until I send you an invoice before paying. Any item over $50.00 must be insured.
|
|
|
Old Vintage Maytag Gas Engine Exhaust Flange S259 Steel
This flange looks to be in new condition. I describe all of my items to the best of my ability. If you have any question please email before bidding. If you buy more than 1 item I will combine shipping. You will want to wait until I send you an invoice before paying. Any item over $50.00 must be insured. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14b5459b162-0x115-
|
|
|
maytag 92 engine Starter Ratchet Clutch Moon Cover Guard
For sale maytag 92 engine starter ratchet clutch moon cover gaurd bead blasted. Ready for paint
|
|
|
maytag 92 engine s240 starter ratchet crank gear
For sale is a maytag model 92 starter ratchet crank gear the has been bead blasted and ready for paint
|
|
|
maytag engine 92 crankcase housing hit miss
Here for sale is a crankcase housing for a maytag model 92 it has been bead blasted ready for paint.
|
|
|
Maytag Antique Hit And Miss Gas Engine Carburetor With Air Cap For Twin
A very nice hard to find and often missing air cap for a model 72 Maytag twin cylinder antique stationary gas engine. Tube and cap are in good condition ready to mount on engine. Cap is loose and no breaks or welds Sold as is
|
|
|
Maytag Antique Hit And Miss Gasoline Engine Tank
A nice original aluminum tank for a twin cylinder model 72 Maytag antique kick start stationary gas engine. Tank is in great condition for age. Sold as is
|
|
|
Antiques Vintage Stationary Maytag Twin Engine Lot Of 4 Used Crankshaft Rings
This is the lot of 4 Crankshaft rings off of my twin cylinder Maytag. I don't know if they are all Maytag, i know for sure 2 of them are original but one i know isn't and one I'm not sure about, any questions just ask, I do combine shipping if you buy multiple items, thanks
|
|
|
Antiques Vintage Stationary Maytag Twin Cyl. Engine Lot Of 12 Used Piston Rings
This is the lot of 12 piston rings off of my twin cylinder Maytag. They are used, enough here for 2 engines, any questions just ask, I do combine shipping if you buy multiple items, thanks
|
|
|
Antiques Vintage Stationary Maytag Single Engine Lot Of 10 Used Piston Rings
This is the lot of 10 piston rings off of my single cylinder Maytag. They are used, any questions just ask, I do combine shipping if you buy multiple items, thanks
|
|
|
Antique Vintage Maytag Twin Cylinder Engine HOT Coil Magneto And Backing Plate
This is a hot coil and good backing plate for a twin cylinder Eisemann Magneto. I don't think its the original coil but it works great, I will combine shipping with my other items, any questions just ask
|
|
|
Old Vintage Antique Twin 2 Cylinder Maytag Gas Engine Pistons and Rods
These are the pistons for a twin cylinder maytag engine. They are very clean but they are missing the piston rings, and one of the rods, and they also are scored, they have some decent scratches, they are definitely useable though, any questions just ask, thanks, I do combine shipping if you buy multiple items
|
|
|
Antique Maytag Single Cylinder Engine Exhaust Flange S-259 Hit Miss Original
This is the very nice original exhaust flange off of my single cylinder Maytag engine. Its in great shape, any question just ask, I will combine shipping if you buy multiple items 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14b5e36b343-0x10a-
|
|
|
Antique Vintage Maytag Single Engine Made In Texas USA Vintage Tiger Spark Plug
This is the Tiger Spark Plug off of my single cylinder Maytag engine. Decent shape, top part doesn't have any chips and its very readable any questions just ask, thanks
|
|
|
Antique Vintage Maytag Single Engine Champion Gas Engine Special Spark Plug
This is the Gas Engine Special Spark Plug Bottom off of my single cylinder Maytag engine. Its in good shape, threads are really good, just needs the top, any questions just ask, thanks
|
|
|
Maytag Vertical Air cooled Flywheel & Govenor for Vintage Stationary gas engine
This is the Flywheel and Govenor for a Vertical Air Cooled Maytag gas engine. It is in very good useable condition. There is no visable problems with it. Please contact me for any other questions.
|
|
|
Maytag Cast Gas Tank for Vertical Air cooled Vintage stationary gas engine
This is a cast iron gas tank for a vertical air cooled Maytag Gas Engine. It is in very useable condition. It dose have a previous repair but it dose not leak. Otherwise it is in good condition. Please contact me for any other questions.
|
|
|
Maytag main bearing housing Vertical Air Cooled Vintage stationary gas engine
This is the main crankshaft bearin mount or holder. It is in good condition but one ear on the mount flange is dammaged and may need repair. It has the part number S44 cast into it. The bearing shows minor wear. Please contact me for any other questions.
|
|
|
RESTORED Upright Maytag Gas Engine With RARE Model C Carburetor NICE 99 CENT NR
You are bidding on this VERY Nicely Restored EARLY Upright Maytag WITH Early Model C Carburetor. Early 4 digit Serial Number 5417. This engine has ALL the Bells and Whistles that normally are missing such as the VERY difficult to find Drilled Cylinder for the RARE and hard to find Ball Bat Handle Priming Cup. Engine is mounted on a Nicely crafted Varnished Wooden Base with Coil Box. Inside Coil Box is a VERY Hot Model T Ford Buzz Coil and Battery. The Model C Carb is one of the Early Brass Carbs that Maytag Experimented with before settling in on the Normal Brass Carb that is found on the majority of Maytag Upright Gas Engines. There are 3 chipped Fins at the top of the cylinder(see pictures) that could be repaired or the engine could be enjoyed just as it has been for many years. From the collection of a deceased Serious Maytag Collector. ... morePLEASE VIEW ALL 12 PICTURES. As you can see the gas line has been pinched off. There is two replacement gas lines that goes along with whoever buys this wonderful old Maytag. This is an opportunity that RARELY comes along. IF you like RARE Maytag items; here is YOUR chance. Engine can be picked up in Goessel. KS or we will ship ANYWHERE FOR THE ACTUAL COST OF SHIPPING which is unknown at this time. I would probably take flywheel and crankshaft off engine and ship in two or three boxes; whichever seemed safest when I start packing. Email IF you have questions or suggestions. Could possibly be delivered to LeSeur or Portland Swap Meets. WE WILL BE LISTING GAS ENGINE PARTS THIS WEEK. PLEASE view our OTHER auctions with MORE Neat Old Vintage car, truck, tractor, gas engine, steam and neat old mechanical stuff. MOST ALL our auctions start at 99 CENTS and SELL with NO RESERVE. Our Top Priority is YOUR satisfaction as a buyer. We want YOU to have a FUN and Positive buying experience. We will do EVERYTHING in our power to make your experience a POSITIVE one.We try and add MORE items daily during January and February. We want you to look forward to seeing what will be listed new each
|
|
|
Maytag twin complete Eisemann magneto Stationary Gas Engine Vintage
This is a very nice Eisemann complete magneto for a Maytag Twin cylinder gas engine. It is in very good condition and would not take much cleaning ane reseting to get it working great. It has the model number of 72 D and the production number of 1027747 stamped on the face of the flywheel. Please contact me for any other questions. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14b5e36b2f5-0x114-
|
|
|
Antique Stationary Maytag Single Cylinder Engine Carburetor Clean
This is the carburetor off of my single cylinder Maytag engine. The engine ran great so it should go right on your engine and run, but the air breather ring is chipped off, any questions just ask, thanks
|
|
|
Antique Stationary Maytag Single Cylinder Engine Carburetor Clean Check Valve
This is the original carburetor check valve off of my single cylinder Maytag engine. It works great, any questions just ask, thanks
|
|
|
Running Maytag Model 92 Gas Engine Motor Hit & Miss Wringer Washer #487586
runs good video on my you tube page"mikestand714"inspection plate not on in pic do have it only thing it needs is spark plug wire holder and muffler.sold as is.will take to Fastenal no charge buyer makes arrangements or local pick up.to big for USPS.but I will take to UPS. any question you can call 6606224325. IT SAYS FREE SHIPPING NOT TRUE LOCAL PICK UP OR MAKE ARRANGEMENTS
|
|
|
MAYTAG 72D ENGINE Vtg Antique Old Original Washing Machine Gasoline Gas Motor
Click here to find our website address: Item Details: Title: MAYTAG 72D ENGINE Vtg Antique Old Original Washing Machine Gasoline Gas Motor, Condition: Has dirt. Dings and normal signs of age. Otherwise has no apparent damage or repairs. Push down on the lever and the engine turns over easily and appears to have compression. Size/Dimensions(approximate) Mounted onto boards that measure 25.5" long. Weighs 51.5 pounds. Uncrated. Description: Pictures are of the actual item that you will receive. Nice old gas engine. This was originally used to power home appliances. Like washing machines, by way of a belt. Purchasing Details: Disclaimer: Seller is not liable for damages caused by misuse of this item. Payment: We accept paypal. Most credit cards and cash on pick up. Contact us for other payment arrangements. Shipping: We ship 6 days a week. ... moreYour item will ship the next business day after payment is received. We only ship to the address provided in the eBay/Paypal transaction. Combined Shipping: If you are interested in more than one of our items. Please win as many as you like. When you are ready, please contact us and we will send you a combined invoice to save you some shipping charges. Tracking: You can track your item by clicking the"View order details" link on the listing that you won. Refunds/Returns: You can return any item for any reason for a purchase price refund. Refunds for items sold with free shipping will be reduced by the original shipping charges. If we made a mistake. We will pay the shipping both ways. Simply mail the item back(include the item# to: DeYoung Auctions. 9931 McClanahan Road. Greencastle. PA 17225 Feedback: We leave feedback immediately after payment has been made. If you are happy with your purchase. Please give us the highest rating in DSR's. If you are not happy, please give us the opportunity to make it right. International Buyers: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibi
|
|
|
Original Maytag Multi-Motor 1 Cylinder Air Cleaner Hit Miss Gas Engine
Old Original Maytag Multi-Motor Air Cleaner 1 Cylinder Hit Miss Gas Engine. It has some original green paint. No cracks. Welds or repairs. See Photos! Auction is for one Maytag air cleaner photos of all sides. Check out my other auctions for old farm engine and tractors parts! Thanks for Looking!
|
|
|
Maytag 72D Twin Gas Engine Flywheel
Very good condition with strong magnet for Eisemann magneto. Ser# 119448X(1947)
|
|
|
Maytag 72 Twin Gas Engine Crankcase and End Cover
No significant rust. A bit of the original black paint. The flywheel end bearing measures.873” while the starter end bearing is.878” Note the pristine condition of the flywheel nut surface. No one has ever used a pipe wrench on it.
|
|
|
Maytag 72 Twin Gas Engine Exhaust Manifold
The usual surface rust. But no pitting on sealing surfaces. No cracks, breaks or welds.
|
|
|
Maytag 72 Twin Gas Engine Starter Segment and Ratchet
Excellent condition and not cracked around the pin opening from driving the tapered pin in too vigorously. Includes balls(not shown in photos)
|
|
|
* MAYTAG MODEL 92M GAS ENGINE MOTOR, HIT & MISS WRINGER WASHER
g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14b67f5fab8-0x10b-
|
|
|
Antique Vintage Maytag Twin Cylinder Engine Mag Coil Magneto Magnets
This is a coil for a twin cylinder Eisemann Magneto. It comes up as a 0 on my resistance test, I don't really know what that means, I will combine shipping with my other items, any questions just ask
|
|
|
Old Cast Iron Wheels Hit & Miss Gas Engine Maytag Industrial Cart Steam Punk
Original Old Matched Set Of 4 Cast Iron 5 Spoke Wheels Hit& Miss Gas Engine Maytag/ Briggs Cart/ Industrial Truck Steam Punk. All four wheels are 8" dia. with a 1 1/2" face. The axle hole is 11/16" dia. No cracks welds or repairs. Nice matched set to make an engine truck for a Maytag/ Briggs or other small hit& miss engine yard cart or steam punk item. See Photos! This auction is for a set of 4 wheels. Check out my other auctions for farm tractor. Engine and machine collectibles! Save on shipping costs with multiple purchases, I will pack your items together when possible! Thanks for Looking!
|
|
|
VTG Maytag air cleaner kick start washing machine engine hit miss 92
VTG Maytag air cleaner kick start washing machine engine hit miss 92 See photos. Great shape. REE SHIPPING APPLIES TO US BUYERS IN THE LOWER 48 STATES. NOT HAWAII OR ALASKA NOT ON ALL ITEMS ONLY ONES THAT STATE FREE SHIPPING•CHECK OUT MY other items! My business is called Antique Rustler. I have been involved with antques for over 15 year. I use eBay to sell more obscure items to a broader market. I do consign items but mainly just sell my products. I expect payment within 7 business days. If you have the need to pay with a personal check be aware that it will take longer for you to recieve your item as I will have to wait for it to clear. Sometimes the shipping calculator is inacurrate so Please wait for my invoice before you pay. If you have any questions feel free to message me, I look forward to dealing with you! Powered by The free listing ... moretool. List your items fast and easy and manage your active items.
|
|
|
Vintage Cast Aluminum Ball Muffler Maytag Hit & Miss Gas Engine Engine Parts
Up for auction is a cast aluminum ball muffler. Please read discription and look at all pictures as they ars a part of the discription. Listed as used but maybe NOS, was going to beadblast it and paint it with high temp. black paint, but after opening it up I discovered there were no carbon or soot deposits in the muffler, pipe or flange, I dont think it was ever used. The muffler is 3 3/8" Long, 3" dia. and 5/16" wall thickness, overall length is approx. 4 1/2" 7/8" pipe. The flange is 3" long, 1 11/16" wide and mounting holes are approx. 2 1/4" center to center. It does fit on a Maytag Model 92 and Im sure it fits many others, includes bolts. Thank You for looking and Happy Bidding! Note, I tryed to offer two shipping options, Priority Mail calculated shipping or Priority Mail Padded Flat Rate Envelope ... morefor $6.10, Thank You
|
|
|
Maytag antique five gallon engine oil can never opened very rare advertising
A very rare five gallon can still full of original Maytag oil. Never opened and part of the paper label on the back is missing. It shows some signs of rust but is not leaking. If i send it full it will have to go by freight truck and if i open and drain it can go by ups or fedex or regular mail. The buyer will decide what they want to do about shipping and will pay the exact cost. I am showing the shipping free for that reason but it will be up to the buyer to decide what they want to do. It can also be picked up here and storage is not a problem for a while.
|
|
|
Large Lot Maytag Gas Engine Kick Start Ratchet Parts - 99 CENT NO RESERVE
You are bidding on this large lot of Maytag Kick Start Ratcheting Parts. ALL Good Usable parts. View pictures to see one gear has chip on one tooth. Still a usable part. View our other auctions where WE WILL BE LISTING FORE RARE MAYTAG ITEMS THIS WEEK. We will ship ANYWHERE in the USA for $16. We ALWAYS combine shipping when we can. We ship the SAME Day payment is received and ALWAYS COMBINE shipping when possible. PLEASE view our OTHER auctions with MORE Neat Old Vintage car. Truck, tractor, gas engine, steam and neat old mechanical stuff. MOST ALL our auctions start at 99 CENTS and SELL with NO RESERVE. Our Top Priority is YOUR satisfaction as a buyer. We want YOU to have a FUN and Positive buying experience. We will do EVERYTHING in our power to make your experience a POSITIVE one.We try and add MORE items daily during January and February. ... moreWe want you to look forward to seeing what will be listed new each day. If you need more pictures or info, PLEASE ask. We wish YOU the Very Best and THANKS a bunch for looking, Jerry
|
|
|
Maytag 92 Gas Engine Flywheel & magnetic ring FY-ED4 Hit Miss Motor antique vtg
Description Here is an original good flywheel off a Maytag 92 motor. Marked FY-ED4. Has the inside magnetic ring included. Good used condition. No cracks. Stamped 391487 on outer ring. Ready for your vintage Maytag motor restoration. As found condition, It's a bit dusty and dirty. I see some have been bead blasted, we'll leave this one original and let you decide how it should look on your engine. Sells at No Reserve. Just bid and you could own it. No reserve. Please view our other auctions. Email any questions or call me 330-801-2364. Shipping calculator to figure shipping. International email for shipping costs. Combine shipping on multi purchases. Free local pick up welcome. Payment Payment using Paypal. Please pay within 3 days or the item will be relisted. We also welcome pick up at our home and you can pay us with good old US ... moregreenback dollars. Shipping Normal items are shipped USPS priority mail. If it's something large or oversize will go USPS parcel. We ship 6 days a week. We try and pack things securely. If you would like another method of shipping. Please inquire and we will do our best to get you a quote. We've had dealings where buyers have their own UPS or FEDEX account, we can arrange to drop off and your account gets billed. About Us We"pick" all kinds of places to find cool stuff for you. We're up before dawn at flea markets. Digging in old barns and basements, spending long days at auction, whatever it takes to find cool stuff. We always try to bring you fun and unusual finds. This is a fun hobby for us. We do work other jobs, so please be patient when you ask a question, it may take a couple of hours to get back to you, but will do our best to answer all questions. Please email or you're welcome to call 330-801-2364 with questions. Contact Us We do our best to bring you good quality items. We pack things well to avoid breakage. If something arrives damaged or if you have an issue. Please contact us and we'll do our best to make you happy, to assure there is
|
|
|
Maytag Hit And Miss Gas Engine Twin Kick And Metal Cover All Original
Nice original twin cylinder kick pedal and ratchet gear that has the sliding tooth complete with steel guard in very good condition. All parts are loose with no cracks breaks or welds. A hard to find ratchet with a good cover for an antique stationary gasoline engine. This is for a 72 model multi motor Sold as is
|
|
|
Original Maytag Multi-Motor 1 Cylinder Ball Muffler & Hose Hit Miss Gas Engine
Old Original Maytag Multi-Motor Ball Muffler& Flex Hose 1 Cylinder Hit Miss Gas Engine. Can also be used on the twin cylinder engines. It has part#S259 on the mounting flange. Hose with muffler is 4' 5" long overall. No cracks. Welds or repairs. See Photos! Auction is for one Maytag hose& muffler photos of all sides. Check out my other auctions for old farm engine and tractors parts! Thanks for Looking!
|
|
|
Miscellaneous Maytag Gas Engine Parts - 99 CENT NO RESERVE
You are bidding on these miscellaneous Maytag Single Gas Engine Parts. Good Kick Start Ratchet and housing with Excellent gear teeth. High Tension Lead Out Shield and Oil Catch Ring and Brass Tune. LL good usable parts. View our other auctions where WE WILL BE LISTING FORE RARE MAYTAG ITEMS THIS WEEK. We will ship ANYWHERE in the USA for $12. We ALWAYS combine shipping when we can. We ship the SAME Day payment is received and ALWAYS COMBINE shipping when possible. PLEASE view our OTHER auctions with MORE Neat Old Vintage car. Truck, tractor, gas engine, steam and neat old mechanical stuff. MOST ALL our auctions start at 99 CENTS and SELL with NO RESERVE. Our Top Priority is YOUR satisfaction as a buyer. We want YOU to have a FUN and Positive buying experience. We will do EVERYTHING in our power to make your experience a POSITIVE one.We try ... moreand add MORE items daily during January and February. We want you to look forward to seeing what will be listed new each day. If you need more pictures or info, PLEASE ask. We wish YOU the Very Best and THANKS a bunch for looking, Jerry
|
|
|
Two Maytag Engine Blocks Good - 99 CENT NO RESERVE
You are bidding on these TWO Maytag Single Engine Blocks. Both are GOOD Usable Parts with NO Issues. View our other auctions where WE WILL BE LISTING FORE RARE MAYTAG ITEMS THIS WEEK. We will ship ANYWHERE in the USA for $16. We ALWAYS combine shipping when we can. We ship the SAME Day payment is received and ALWAYS COMBINE shipping when possible. PLEASE view our OTHER auctions with MORE Neat Old Vintage car. Truck, tractor, gas engine, steam and neat old mechanical stuff. MOST ALL our auctions start at 99 CENTS and SELL with NO RESERVE. Our Top Priority is YOUR satisfaction as a buyer. We want YOU to have a FUN and Positive buying experience. We will do EVERYTHING in our power to make your experience a POSITIVE one.We try and add MORE items daily during January and February. We want you to look forward to seeing what will be listed new each ... moreday. If you need more pictures or info, PLEASE ask. We wish YOU the Very Best and THANKS a bunch for looking, Jerry
|
|
|
Maytag Vertical Air Cooled Piston and Rod Stationary Gas Engine Vintage
This is a Piston and rod that came out of a Vertical Air Cooled Maytag Gas engine. I do not beleive the rod is the correct one but the piston is correct. It is in very good usable condition. Please contact me for any othere questions.
|
|
|
Old Vintage Maytag Model 82 Gas Engine Crankshaft and Bearing
I don't feel any play in bearing. Crank needs polished. Brass bearing is#S220. I describe all of my items to the best of my ability. If you have any question please email before bidding. If you buy more than 1 item I will combine shipping. You will want to wait until I send you an invoice before paying. Any item over $50.00 must be insured. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-14b80fb146e-0x112-
|
|
|
Old Vintage Maytag Model 82 Gas Engine Crank Case
It is in good condition. It is#S214. I describe all of my items to the best of my ability. If you have any question please email before bidding. If you buy more than 1 item I will combine shipping. You will want to wait until I send you an invoice before paying. Any item over $50.00 must be insured.
|
|
|
Maytag Vertical Air cooled cylinder Vintage Gas Engine
This is a cylinder for a vertical air cooled May Tag gas engine. It is in very good condition with one small chip out of the bottom fin. The boar is very good and very useable item. Please contact me for any other questions.
|
|
|
MAYTAG WRENCHES NUMBER 3 & 6 for WASHING MACHINE GAS ENGINE MOTOR FREE SHIPPING
These are 2 Maytag wrenches I found in my Grandfathers Garage- They are both stamped Maytag. One very prominently(6) one a little lighter(3) and it has a part number stamped on it: 14987. There was a 1 cylinder Maytag engine which I already sold so my Grandmother most likely maintained it- Any questions let me know. One bid gets both wrenches.and includes FREE shipping. Free shipping applies to CONUS.Alaska,Hawaii. PR may be more. Foreign- you pay actual Postal shipping charge. no phoney handling fees. I do not ship to many"countries" including Italy.
|
|
|
Rare restored long base maytag twin cylinder antique stationary engine hit miss
Nice restored lonbase twin cylinder maytag engine. Starts and runs good. No cracks breaks or repairs known. Fuel tanks has been sealed. This engine is tight and has virtually no wear.please look at pictures to see what your buying.mif questions just ask thanks. Video of it running-YouTube longbase twin for sale
|
|
|
Maytag Multi Motor Engine Oil Can Vintage Advertising Newton Iowa,1 quart
vintage original maytag 1 quart oil can.Still kinda greasy
|
|
|
MAYTAG 72 TWIN MAGNETO COIL AND BACKPLATE ENGINE
YOU ARE BIDDING ON A GOOD LOOKING MAYTAG 72 TWIN CYLINDER COIL AND BACKPLATE ASSEMBLY FROM AN EISEMANN FLYWHEEL. LOOKS VERY NICE BUT HAS NOT BEEN CHECKED. HAPPY BIDDING.
|
|
|
MAYTAG TWIN 72 RODS PISTONS ENGINE NICE !
YOU ARE BIDDING ON A GOOD LOOKING PAIR OF RODS AND PISTONS FROM A 2 CYLINDER MAYTAG 72 GASOLINE ENGINE. RINGS ARE STUCK. HAPPY BIDDING.
|
|
|
JACOBSEN 4 ACRE MOWER BRIGGS NELSON HIT MISS ENGINE VERY ORIGINAL NICE MAYTAG
UP FOR SALE IS A JACOBSEN 4 ACRE MOWER WITH A JACOBSEN ENGINE. THE SERIAL NO. ON THE TAG READS 1610. THIS ENGINE IS LOOSE WITH GREAT COMPRESSION. THE STARTING CRANK CAME WITH THIS ENGINE AND DOES WORK TO TURN THE ENGINE OVER. THERE ARE NO CRACKS. OR WELDS ON THIS ENGINE. THE ONLY BREAK I CAN SEE ON THIS ENGINE IS THERE IS A PC. BROKE ON THE MUFFLER( PIC 8) THE ENGINE IS MISSING THE PLUG WIRE THAT GOES FROM THE MAGNETO TO THE SPARK PLUG. THE MOWER IS 32" WIDE. AS SEEN IN THE PICS THE MOWER ITSELF IS MISSING THE REELS AND A HANDLE. I DON'T KNOW IF ANYTHING ELSE IS MISSING FROM THE MOWER SO PLEASE LET THE PICTURES BE YOUR GUIDE AND ASK ANY QUESTIONS YOU MIGHT HAVE. THE MOWER ITSELF APPEARS TO HAVE AN ORIGINAL ORANGE FINISH, BUT THE ENGINE SHROUDING APPEARS TO HAVE BEEN PAINTED RED AT SOME POINT. MOWERS OF THIS AGE DUE NOT SHOW UP VERY ... moreOFTEN FOR SALE SO NOW IS YOUR CHANCE TO ADD TO THE COLLECTION. DUE TO THE SIZE AND WEIGHT I AM OFFERING THIS AS LOCAL PICK-UP. I AM OPEN TO SHIPPING THIS PC. VIA FASTENAL OR OTHER OPTIONS FROM YOUR END. PLEASE CONTACT ME PRIOR TO PURCHASING TO MAKE SURE WE CAN GET THIS MOWER FROM POINT A TO B. IF YOU HAVE ANY PAYMENT QUESTIONS. SHIPPING QUESTIONS, OR OTHER QUESTIONS, PLEASE CALL TROY AT 920- 210- 1091. JUSTIN WENDORFF 1051 WILLOW ST. LOMIRA. WI 53048 PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction end. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I am listing this item as LOCAL PICK-UP. Delivery to shows like Baraboo WI. Portland IN, Coolsprings PA, etc. are options, but please contact me prior to bidding to make these arrangements. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, co
|
|
|
Original Maytag 92 Flywheel with HUB no cracks hit miss engine NICE 1936
I have for your consideration a complete flywheel for a Maytag model 92 gas engine. This flywheel dates August on 1936. The serial# is 731885. This is a nice clean flywheel. The flywheel is exceptionally clean and shows no wear. I have found no cracks in the fins and the cast hub is not cracked like 90% of them are. I have seen other seller strip a flywheel out and try to sell it to you in 6 different pieces. I am not that way.this is a 1 stop shop. You will get the flywheel. Magnet, govenor, inspection cover,and hub. This is a nice clean piece, you will not be disapointed. THIS IS YOUR CHANCE. IF YOU HAVE ANY PAYMENT QUESTIONS. SHIPPING QUESTIONS, OR OTHER IDEAS, PLEASE CALL JUSTIN AT 920-344-8077. JUSTIN WENDORFF 1051 WILLOW ST. LOMIRA. WI 53048 PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. ... morePayment is due within 10 days of auction end. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I will be using USPS shipping plus delivery confirmation. I will combine shipping if possible. Please contact me prior to checking out if you are or will be bidding on multiple items. Delivery to shows like Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. Insurance is offered to you, at your actual cost if desired. I will ship this item International. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, contact me and I will try to do anything within my power to resolve the issue. I will only accept returns if there is an error in my listing, not a change of heart on your part. With that said, I uphold a 100% feedback rating and do everything I can to maintain that status. So
|
|
|
Original Maytag 92 Flywheel Magnet ONLY Nice HIT MISS GAS ENGINE
I have for your consideration a loose flywheel MAGNET ONLY for a Maytag model 92 gas engine. The flywheel had a cracked fin so it hit the dumpster. I removed the magnet for your pleasure. This is a nice clean piece. You will not be disapointed. THIS IS YOUR CHANCE. IF YOU HAVE ANY PAYMENT QUESTIONS. SHIPPING QUESTIONS, OR OTHER IDEAS, PLEASE CALL JUSTIN AT 920-344-8077. JUSTIN WENDORFF 1051 WILLOW ST. LOMIRA. WI 53048 PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction end. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I will be using USPS shipping plus delivery confirmation. I will combine shipping if possible. Please contact me prior to checking out if you are or will be bidding on multiple items. Delivery to shows ... morelike Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. Insurance is offered to you, at your actual cost if desired. I will ship this item International. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, contact me and I will try to do anything within my power to resolve the issue. I will only accept returns if there is an error in my listing, not a change of heart on your part. With that said, I uphold a 100% feedback rating and do everything I can to maintain that status. So bid high and bid often. GOOD LUCK AND HAPPY BIDDING!
|
|
|
Original Maytag 92 V-Belt Pulley Very Nice Condition HIT MISS ENGINE WOW
I have for your consideration a factory V-belt pulley for a Maytag 92 Engine. This pulley is in great overall condition. Many of these pulley's that you see for sale have been removed with a screwdriver and hammer and they show it. You also commonly see the center hub corroded away. Let the pictures be your guide on this nice clean pulley that was removed correctly. And is in prestine condition. THIS IS YOUR CHANCE. IF YOU HAVE ANY PAYMENT QUESTIONS. SHIPPING QUESTIONS, OR OTHER IDEAS, PLEASE CALL JUSTIN AT 920-344-8077. JUSTIN WENDORFF 1051 WILLOW ST. LOMIRA. WI 53048 PAYMENT: I will be accepting PAYPAL or CASHIERS CHECK for a fast. Smooth, and easy transaction. Payment is due within 10 days of auction end. Please omit from bidding if you cannot or do no want to pay for the item. SHIPPING: I will be using USPS shipping plus delivery ... moreconfirmation. I will combine shipping if possible. Please contact me prior to checking out if you are or will be bidding on multiple items. Delivery to shows like Baraboo, Portland, Coolsprings, etc. are options, but please contact me prior to bidding to make these arrangements. I do not use shipping for a profit center. Insurance is offered to you, at your actual cost if desired. I will ship this item International. THE REST: Due to the age and condition of many of the items that I sell. I will be selling them in an"AS IS" condition. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, contact me and I will try to do anything within my power to resolve the issue. I will only accept returns if there is an error in my listing, not a change of heart on your part. With that said, I uphold a 100% feedback rating and do everything I can to maintain that status. So bid high and bid often. GOOD LUCK AND HAPPY BIDDING!
|
|
|
antique grinder flat belt drive hit miss engine maytag Briggs etc
For sale is an old cast iron grinder. It turns over freely but does have a chip out of the pulley. Would look nice restored with a hit and miss engine. Maytag or old Briggs. Please look at the picture closely as these are a big part of the description and ask me any questions before bidding. If you want more pics just let me know and I will email them to you. This item is being sold as is. Many of the items I sell are used or vintage and although I try to describe everything I see. I am not an expert and may miss things or some things I think of as insignificant may be very important to you, so please email me with any questions first. If you are not happy with your item you can return it and I will refund you the purchase price(you have to pay shipping) Thanks for looking and please check out my other auctions. Thanks. If you have any problems ... morewith your purchase please contact me. Thanks. old antique vintage rare stone sharpening grinder wheel
|
|
|
Antique Maytag Oiler Can with Spout - hit miss engine washer farm barn find
For your consideration. Small Maytag oil can with spout for use with Maytag washer engine. Decent condition for age- see pictures for details From an estate sale and selling"as-is" so please see pictures and ask questions. Thanks for looking! THE FINE PRINT: 1. I work very hard to make all my customers 5-star happy. If you are not"5-star" Completely satisfied, let me know so that I have a chance to correct the issue before you leave negative or neutral feedback. I cannot fix a problem of which I am unaware. 2. SHIPPING: Please use the shopping cart or wait for invoice for multiple purchases. These are the only ways I can reduce your shipping charges on multiple purchases. 3. PAYMENT: Payment via PayPal expected within 3 days of auction end unless arrangements are made ahead of time. If you pay by e-check through PayPal. ... moreIt takes several business days for that payment to clear and be deposited into my account(just like a paper check) Your item will ship once your e-check payment has cleared into my account. If you don't have a PayPal account- we will consider other forms of payment. 4. RETURNS& REFUNDS: All returns handled on an individual basis. Please contact us prior to returning item so that we can determine best way to proceed. If. By some chance your item arrives broken, I will need you to send me picture of packaging and picture of item via the EBay messaging system, before proceeding with return or refund. Thank you. 5. DESCRIPTIONS: Most of my items are obtained through estate sales and farm auctions. I do clean up the items a little for the pictures. But I leave thorough cleaning to the new owner since patina from age and use, once removed, cannot be replaced. I describe items to the best of my ability and try to be very objective in my wording. I take lots of pictures as well, and they are intended to be part of the description. If you have a question that is not addressed in the photos or wording- please ask and I will answer to the best of my ability. 6. The only shipping o
|
|
|
Antique Stationary Maytag Single Cylinder Engine Caution Plate Model 31
This is the caution plate for a model 31 Maytag engine. Any questions just ask, thanks, I will combine shipping
|
|
|
Antique Stationary Maytag Single Cylinder Engine Carburetor and Brass Screws
This is the carburetor and original carburetor Brass Screws off of my single cylinder Maytag engine. Looks to be in great shape with no cracks or breaks, was running this engine about an hour prior to the listing so I guarantee it will work, any questions just ask, thanks(I will combine shipping)
|
|
|
Antique Vintage Maytag Engine Single Cylinder Magneto Points Coil Condenser
This is the magneto off of a single cylinder Maytag. The coil is dead and the backing plate is broken but its got really good points and condenser, any questions just ask, I do combine shipping
|
|
|
Perry Davis Coil & Condenser Ignition Tester 751-453Briggs,Maytag Vintage Engine
Here is a nice used Perry Davis Coil& Condenser ignition Tester. This is a must for the avid small engine guy to test the coil and the condenser and reduce all that trouble shooting time by half. It is also a great tool to test all those spare parts you have been holding on to and wondering if they were good or not? These give q uick and accurate testing. Operates on 110 volt AC current so you don't have to change those dang batteries and it m easures any condenser rated.10 to.40 MFD. A must so you can match the right microfarad reading for your engine. Comes with a copied instruction sheet and a handy carrying case. If you do some shopping you will find that Stens still offers one of these. 751-453 at $250 and Amazon has it for $219. Get it here for less. E-mail me with any questions you might have. Thanks for looking. We PREFER ... morePaypal so we can get your Items to you as soon as possible. Payment is do before seven days of close of auction. I WILL SEND A BILLING INVOICE AT THE END OF THE AUCTION. BUYERS MUST REPLY WITHIN 2 DAYS WITH INSTRUCTIONS OF WHEN PAYMENT CAN BE EXPECTED. Prompt payment means positive feedback. Good Luck! 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14b8f44d906-0x10d-
|
|
|
MAYTAG OIL CAN OLD ANTIQUE VINTAGE GAS ENGINE HIT MISS
VINTAGE MAYTAG OIL CAN. CAN MEASURES 4 1/2" TALL BY 2 1/2" DIA. CAN SHOWS TYPICAL NICKS. SCRATCHES AND MINOR DENTS FROM BEING USED. GRAPHICS ON BOTH SIDES SHOW SOME FADING AND WEAR, BUT ARE CLEAR AND LEGIBLE. SPOUT IS BENT AND THE SEAM IS SEPARATED ON THE OUTSIDE OF THE BEND. STILL A NEAT OLD CAN TO PUT WITH YOUR MAYTAG MEMORABILIA.
|
|
|
Great Running Maytag Mod 72 Gas Engine Motor Hit & Miss Wringer Washer #151982X
Offered for sale is a vintage Maytag 2 Stroke. 2 Cylinder Model 72 Maytag Engine. It carries a serial number of 151982X which makes it a 1948 built(approximately) in the month of April of that year. I bought this engine from Zach Northway of Flywheel Supply with intent of mounting it onto a period Maytag washer and using it for show, but life’s dealings are not going to allow that to happen. The engine looks good and it is a“prime” piece of American history. Zach’s shop completely restored this engine. Replacing all necessary parts and fitting all components requiring it. They also gave it break-in run time in his shop. It is ready to run with good spark and compression. No oil or fuel has been in it since its initial rebuild running. So it will be the new owner’s responsibility for fueling it and giving it any additional run time. I only ... moreremoved it from the box in which it was shipped to me long enough to take the pics of it. Please note that the kick pedal and the bolts to hold it in place were removed for shipment and the pics show the bolts not installed. The pedal and bolts will be shipped loose and it will be the responsibility of the new owner to re-install these parts. This is a very nice engine. Great for a beginner or an experienced collector who wants to add a nice 72 engine to his/her collection. It would make a great present for any engine collector. Item will be shipped within 3-5 working days(after payment is received) to lower 48 states only. Payment must be in the form of PayPal. Or cash on pickup. Payment must be made within 7 days from auctions end. Feel free to ask questions. I will try my best to get back to you with answers to them. Thanks for looking!
|
|
|
3 Nice Maytag 72 Twin Cylinder Hit & Miss Gas Engine Fuel Tank Top Lids 92 82
This is 3 Top Plates Or Fuel Tank Tops Or Lids for the later Maytag Model 72 Twin Cylinder Gas Engines. They Are in Good Condition Not All Pitted up, These are the type that Have the Bracing All the way Across On the top. Many Of these are cracked or repaired. Don't miss out On your chance to Replace that Bad One& Have A couple spares For A real Reasonable Cost! This Item Weighs 11 LBS! These will Have A flat rate shipping Cost Of $10.00 In The USA. I will Combine shipping When Possible. I will Do My Best To Box& Pack Everything. As I would want to receive it. But once shipped I am no Longer responsible for Items Unless Insured. Don't forget to Look At my other items For more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges +$3.00 Please Wait to check Out until ... moreYou Receive An Invoice from Me With The correct Amount to pay! I am A real Person.If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the E-Mail Process You Can Call Me: Geoff Voorhees 715-928-1238 1246 Us Hwy 63 Baldwin WI 54002 www.prarieclassicsinc.com
|
|
|
Antique Vintage Briggs And Stratton Engine Model WMB Washing Machine Maytag
This is a Briggs WMB that I recently went through. Its not perfect but its really nice, as you can see the carburetor is repaired and the shroud isn't in perfect shape, its got dents in it, and the kick start gear assembly needs to be put together, I don't know how that all works, and there isn't a gas tank, other than that I think its a runner, its got really really good spark, and very very good compression, its definitely a runner, and the carburetor works great, its just a little bent, any question just ask, thanks
|
|
|
4 Antique 3 7/8'' CAST IRON WHEELS Gas Stationary ENGINE CART MAYTAG
3/4' INCH WIDE HAVE SOME PITTING AND SURFACE RUST WERE AXLE GOES IS 1/2' A COUPLE OF THE WHEELS HAVE CHIPS BUT NOTHING MAJOR SANDBLAST THEM THE LOOK GREAT NO CRACKS THAT I see g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14b9729515a-0x103-
|
|
|
Vintage MAYTAG #8 WRENCH, Hit & Miss Gasoline Engine Tool,NEWTON,Iowa IA
I believe this is a# 8 Maytag wrench. I'll let you be the judge. It measures about 5 3/8" long. It is in good condition with a little wear. Buyer pays Shipping& Handling Items shipped: from same day- to 3 days maximum SATISFACTION GUARANTEED or MONEY BACK Save on shipping by combining with our other eBay store items or auctions ~Iowans please pay 7% Iowa State Sales Tax~ Thank You for Looking at Our Items Please email us with any questions 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14b978d64f7-0x107-
|
|
|
Gas Engine Magazine 1990 March Maytag model 92 RD 7 snowplow Lambert adventure
Auction Wizard 2000 Listing Template- AW2KLOT#47642 RailroadTreasures offers the following item: Gas Engine Magazine 1990 March Maytag model 92 RD 7 snowplow Lambert adventure Gas Engine 1990 March Table of Contents The R. D. 7 Snowplow. By Morris Blomgren2 The Runaway Engine. By Jesse M. Livingston 3 Maytag Model 92. By John Vannordstrand 4 Manitoba Case Expo Show Report. By Arthur Brigham 5 A Lambert Adventure. By C. Richard Dyke 7 What Will Happen To My Collection When I'm Gone? by Jack Versteeg10 How I Made A PTO Pulley For My Fordson. By James Hill 11 Photo Album 12 Reflections. By C. H. Wendel 14 The Best Part: All Kinds of Response. By Tom Knowles 26 EDGE&TA Message From The President 27 All pictures are of the actual item. If this is a railroad item. This material is obsolete and no longer in use by the railroad. Please email ... morewith questions. Publishers of Train Shed Cyclopedias and Stephans Railroad Directories. Large inventory of railroad books and magazines. Thank you for buying from us. Shipping charges Postage rates quoted are for shipments to the US only. Ebay Global shipping charges are shown. These items are shipped to Kentucky and then ebay ships them on to you. Ebay collects the shipping and customs/ import fees. For my postage rates to these countries. Send me an email. Shipping to Canada and other countries varies by weight. Payment options Payment must be received within 10 days. Visa. Master Card and American Express accepted directly for immediate shipping! Paypal is accepted. Terms and conditions All sales are final. Returns accepted if item is not as described. Contact us first. No warranty is stated or implied. Please e-mail us with any questions before bidding. Thanks for looking at our items.
|
|
|
Maytag 92 31 Caution Plate Gas Engine Motor Single Hit Miss Flywheel Wringer 2
Brought to you by Ebay's largest seller of NEW. Used and Rebuilt Maytag engine parts. Over 10 years in the business and with the last couple being spent a lot on Ebay we are quickly becoming one of the top Maytag sellers out there. Your one stop shop for Parts relating to Antique Maytag Gas Engines. We have a large selection of in stock parts and also custom build anything you might need. And as always our advice is always free! Rather you can't get your engine to run or you are looking for more collectors in your area, we have what it takes to get you what you both want and need! Call(712) 490-5596 today and see what we can do to help you. Thanks for looking Flywheel Supply. Part: Maytag Engine Caution Plate Condition: Original. Description: An original Caution Plate for your Maytag Engine. Fits all the single cylinder engines with ... morethe aluminum carburetor. Questions? Call Flywheel Supply 712-490-5596 Be sure to add me to your! Check out my! Warrantee: I dont warrantee any of my parts per say. Warrantee's run out and expire! What I want is to personally make sure that the item you purchase from me is what you need and works like it is intended to! If that means money back on some items or fixing it or sending you a different item. That is what I want todo. I dont offer a return policy, I offer my word to make you a happy and repeat costumer! Face it, These are OLD engines and not every one is the same. What works on one might not work on another. So with that in mind we will do what it takes to fix your engine and make you happy! No one else on Ebay with Maytag parts says that. BUT That is what I will do! You have my word!
|
|
|
VINTAGE MAYTAG MOD. 72 GAS ENGINE FLYWHEEL PULLEY
Flywheel pulley for Maytag Mod. 72 two cylinder gas engine. Good condition. No dents, slight surface rust pitting.
|
|
|
1935 Maytag Model 92 Restored short base engine
Up for bid is a restored 1935 serial# 609860 model 92 engine. Engine has been taken completely apart. Sand blasted and painted while in pieces. Engine has new rings in honed cylinder. Bushings were polished with all new gaskets. Carburetor was soaked and cleaned with new air valve and seat and spring. Engine starts and runs great at a steady pace. Engine has new decals and is ready for spring shows. Ships to lower 48 states only.
|
|
|
NICE ORIGINAL 8FT MAYTAG 92 EXHAUST HOSE HIT & MISS GAS ENGINE FARM L@@K!!!
You are bidding on a very nice. Hard to find, original 8ft exhaust hose assembly for a Maytag 92 kickstart engine. The hose is in great shape and bends with ease, not all rusted up and brittle. The muffler and flange are also in nice shape with no issues. Judging by the flange, I believe this is for the earlier 92's, but obviously it will fit them all. These don't come up for sale too often, so bid to win, no reserve! No dissapointments! Feel free to ask questions. Good Luck and Happy Bidding!
|
|
|
Vintage Maytag Washing Machine Multi Motor Engine Oil Can, 1 Gallon
This Is A Nice Oil Can From Maytag of Newton. Iowa. This Dates To The 1950's or Earlier Timeframe. Measure 10 1/2" Tall x 6 1/2" x 4 1/2" Weighs In At 14.3 oz. Each. Please See Photos For Best Details. All Items Packaged Safely, Securely, and Mailed The Following Day After Payment. If Applicable. A Refund Will Be Given Via PayPal For Shipping Overage. Please Be Aware That The Shipping Price Includes Shipping. Packaging, and Handling. I Am A 12 Year Seller On eBay. Payment By PayPal Only and Expected Within 4 Days of Auction End. Buy It Now Payments Are Immediate. I Am Happy To Answer Any Questions At Any Time During The Listing.
|
|
|
CAST IRON 8 SPOKE WHEEL HIT N MISS ENGINE MAYTAG STEAM PUNK 16 1/4 x 2
Here is an old cast iron wheel 16 1/4 inches by 2 inches wide. 8 spoke with a 3/4 inch axle hole. Shipping is $18 USA 48. Please see my other items. Thanks for looking.
|
|
|
Oct.1929 Maytag Co. Newton Iowa Washer with Gasoline Engine ad
This is an"Orginal Not A Copy" 11 1/2" by 5" vintage dated Oct. 1929 Maytag Co. Newton. Iowa Maytag Washer with gasoline engine magazine advertisement. Also Shows Churn Attachment. Great Graphics. Date printed on the page. Nice reference go-with for collector. Good Condition. Shipping $2.25 in the USA. Shipped flat with backer board in plastic sleeve for protection.Always combined shipping for two or more items.
|
|
|
CAST IRON 8 SPOKE WHEEL HIT N MISS ENGINE MAYTAG STEAM PUNK 14 3/4 x 1 3/4
Here is an old cast iron wheel 14 3/4 inches by 1 3/4 inches wide. 8 spoke with a 3/4 inch axle hole. It has some concrete on it, so I guess it was a wheelbarrow wheel. Shipping is $18 USA 48. Please see my other items. Thanks for looking.
|
|
|
Maytag General Catalog No. 25 Maytag gas engine antique equipment 1915
Maytag General Catalog No. 25 Maytag gas engine antique equipment Dated 1915 Excellent condition Lots of information and pictures Fashion ware as well Really Nice Piece of History 56 pages
|
|
|
Old Vintage 3 Unused Maytag Gas Engine Letterhead and Envelopes
These letterheads are unused and have the envelopes. I describe all of my items to the best of my ability. If you have any question please email before bidding. If you buy more than 1 item I will combine shipping. You will want to wait until I send you an invoice before paying. Any item over $50.00 must be insured.
|
|
|
Maytag 72 Hit and Miss Gas Engine Flywheel Pulley
Up for auction is a nice Maytag 72 Flywheel pulley. Buyer to pay3.00 for USPS first class Mail Shipping. Shipping Will be combined as possible. I try to ship the next day as possible. Any questions please email me and thanks for looking! 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14ba669fdfb-0x117-
|
|
|
Maytag 72 Hit and Miss Gas Engine CarburatorPick up Tube
Up for auction is a used pickup tube for a Maytag 72 gas engine. It works well when blowing into it so no cleaning will need done. Buyer to pay3.00 for USPS first class Mail Shipping. Shipping Will be combined as possible. I try to ship the next day as possible. Any questions please email me and thanks for looking!
|
|
|
Maytag 72 Hit and Miss Gas Engine Gas TankCap
Up for auction is a Maytag 72 gas tank lid. Buyer to pay 3.oo for First Class shipping Shipping. Shipping Will be combined as possible. I try to ship the next day as possible. Any questions please email me and thanks for looking!
|
|
|
Original Maytag Upright Multi-Motor Hit & Miss Gas Engine Wood Washer Engine !!!
This is a Maytag Upright Multi-Motor 2 Cycle Gas Engine. From An Early Gas Powered Model 43 or 44 Wood Washer From About 1919. This is In Need Of A full Restoration, Or to Use For Parts. The Engine Is Loose& Has Some Compression. It Is Clean& will Be Easy To Get Apart, This Still Has Most Of the Original Type Bolts. The Cylinder Jug Is pretty Good, However it does Have A few chipped Fins As Can be seen in the pictures.This Is complete Except for The Ignition Components, timer& commutater) Which Are usually Missing, Or Need replaced anyway! The Serial Number is 59051 It was Stamped Kind of lightly On The flywheel But Is the right Number Range for the Features Of the Engine. This looks to Have A pretty Good E- Type Carb. That Will need the choke cap. Any Of The Parts Missing On this Engine Are Available Right Here on E-Bay From ... moreA few of the Vendors That Make Parts, This Is A good Engine For Someone That Is looking to completely Restore An Upright Maytag. No Maytag Collection Is Complete Without At Least One! It Has A nice Vintage sparkplug. The Base& Mounting Ears Are good, However I do See A chipped fin On One of the 4 blades of the"fan" Also The tip Of The flywheel Hub Has Been Broke off. Many Are like this, I don't Think It Is A big Deal As it was A support Journal when Hooked to the washer. No Other Damage or repairs. Look The pictures over Well As they Are Part Of the description& Let me know if there is something You need me to check. Or Ask Questions If you Have any.Selling As IS. The Packing& Shipping On This Item Will Be A straight $45.00 To Anywhere in the Continental USA! I will Do My Best To Box& Pack Everything. As I would want to receive it. But once shipped I am no Longer responsible for Items Unless Insured Buy the Purchaser. Don't forget to Look At my other items For more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges +$3.00 Please Wait to check Out until You Receive An I
|
|
|
Antique Stationary Model 72-D Maytag Twin Cylinder Engine Rare NO RESERVE
You are bidding on Antique Maytag Engine Model 72=D. This is a twin cylinder motor with a kick start. The engine cranks very easy and runs very good. I have put a video on YOUTUBE so you can see it running. Just click on the link I have added to the description below. The engine has great patina on what paint is left. The flywheel is marked(MADE IN THE UNITED STATES OF AMERICA EXCLUSIVELY FOR THE MAYTAG COMPANY NEWTON IOWA BY EISEMANN MAGNETO CORPORATION BROOKLYN NEW YORK) The outer rim is stamped 878488. The back side says serial#68846. Not sure why the numbers are different unless some parts have been replaced. The engine sell as is. This will make a nice addition to your collection as is or you can repaint it to you chose. This is a NO RESERVE AUCTION so bid to win.shipping can be calculated on crate measuring 16"X14"X12" ... moreweighing approx 70 pounds' Thanks
|
|
|
Muffler, hose & adapter for Maytag Maytag twin cylinder gas engine S259 & S309
For sale is an original Maytag twin cylinder washing machine engine muffler with a short hose and the adapter. Please look at the picture closely as these are a big part of the description and ask me any questions before bidding. If you want more pics just let me know and I will email them to you. This item is being sold as is. Many of the items I sell are used or vintage and although I try to describe everything I see. I am not an expert and may miss things or some things I think of as insignificant may be very important to you, so please email me with any questions first. If you are not happy with your item you can return it and I will refund you the purchase price(you have to pay shipping) Thanks for looking and please check out my other auctions. Thanks. If you have any problems with your purchase please contact me. Thanks. old antique ... morevintage hit miss engine
|
|
|
Maytag twin cylinder 72 gas engine - nice original motor with belt guard
For sale is a nice original Maytag twin cylinder washing machine engine. It has the original belt guard on it. It should not take much to get it going. Last year I primed it and it fired off. I checked and it has good fire. Please look at the picture closely as these are a big part of the description and ask me any questions before bidding. If you want more pics just let me know and I will email them to you. This item is being sold as is. Many of the items I sell are used or vintage and although I try to describe everything I see. I am not an expert and may miss things or some things I think of as insignificant may be very important to you, so please email me with any questions first. If you are not happy with your item you can return it and I will refund you the purchase price(you have to pay shipping) Thanks for looking and please check ... moreout my other auctions. Thanks. If you have any problems with your purchase please contact me. Thanks. old antique vintage hit miss engine
|
|
|
Old Maytag 82 92 72 Twin Single Cylinder Hit Miss Gas Engine Exhaust Hose 6" 4"
Here is A 6 foot 4 Inch(6' 4" length of Original Maytag Hose For A Model 92 Or Single cylinder Maytag Gas Engine.Just As Found Hanging In an Old Garage! It is in Good Condition. Not All Pitted up. Nice& Flexable. Ready To Add To Your Model 92 Gas Engine, To Make A nice Original looking Display! This Length is close to what the wash machines would have had on Them. It will work good For display, But it could Be made shorter to fit your application. This is the common Maytag Hose size, That Was Used On the Single Cylinder Model 92 Engines, It will Also Work on the Model 72's Or Twins. And Or The Model 82's But Would Not be correct. This Item Weighs 10 LBS! And is Bulky. FLAT RATE OF $22.00 SHIPPING IN THE USA! I will Do My Best To Box& Pack Everything. As I would want to receive it. But once shipped I am no Longer responsible ... morefor Items Unless Insured. Don't forget to Look At my other items For more Collectables! Or Be sure to add me to your favorites list! International Bidders: Will Pay Actual Shipping Charges +$3.00 Please Wait to check Out until You Receive An Invoice from Me With The correct Amount to pay! I am A real Person.If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the E-Mail Process You Can Call Me: Geoff Voorhees 715-928-1238 1246 Us Hwy 63 Baldwin WI 54002 www.prarieclassicsinc.com
|
|
|
Maytag 72 Hit and Miss Gas Engine Exhaust Pipe with screws
up for auction is a nice Maytag 72 exhaust pipe with the screws. Buyer to pay10.00 for USPS Priority Mail Shipping. Shipping Will be combined as possible. I try to ship the next day as possible. Any questions please email me and thanks for looking!
|
|
|
PRIMER PRIMING CUP DRAIN VALVE HIT MISS ENGINE 18 NPT MAYTAG JOHN DEERE
NOT SURE OF THE TRUE FUNCTION OF THIS VALVE- LOOKS LIKE A PRIMING CUP VALVE ALSO BELIEVE ITS A 1\8" NPT THREADS OR LARGER DO KNOW IT IS THE SAME SIZE AS A PLUG ON THE DRAIN OF A 92 MAYTAG ENGINE
|
|
|
MAYTAG ENGINE MODEL 72 SCRIP SPARK PLUG CHAMPION HIT MISS MOTOR
MAYTAG SCRIP SPARK PLUG FOR A 72 MODEL ENGINE BROKEN CERAMIC AS SEEN IN PICTURES GREAT ITEM FOR THE FIX IT YOURSELF OR PART FOR A COLLECTION
|
|
|
Maytag Model 92 Gas Hit & Miss Engine Motor-Wringer Washer #498021
This is a model 92 Maytag Engine with the“short. Deep” fuel tank. It carries a serial number of 498021 which makes it a 1933 built(approximately) in the month of June of that year. I bought this engine with intent of getting it running and using it for show, but life's card dealing is making it obvious that I am not going to be able to do that. The engine looks good and is a“prime” piece of American history. I don't see any cracks, breaks, or welds. It turns over freely and has good compression, so I can't imagine it taking too much to get this engine running like a top. It is a nice engine for being near 82 years old. Great for a beginner or an experienced collector that wants to add a nice 92 engine to his/her collection. It could use a good cleaning and a fresh coat of paint or get it to run and show as is. The skids shown ... morein the pics are not included and will not be shipped as part of the sale. This engine would make a good present for any engine collector. Item will be shipped within 3-5 working days(after payment is received) to lower 48 states only. Payment must be in the form of PayPal. Or cash on pickup. Payment must be made within 7 days from auctions end. Feel free to ask questions. I will try my best to get back to you with answers to them. Thanks for looking!
|
|