|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: Sterling Heights, United States 2 levers plus 4 holes in body, 3 in the scroll gives you 1-handed tightening! Nagu chucks have been designed by a machinist with engineering input from ... morematerial, heat treating, and plating specialists in order to satisfy the woodturner's every need.
Buy It Now
Free Shipping Condition: New Location: Fremont, United States Both sides of jaw teeth and guides are ground and hardened for long and stable service life. All guideways and bearing surfaces are precisely machined. ... morePremium Quality: Full steel lathe chuck body, jaws are quenched and hardened.
Buy It Now
$23.85 Shipping Condition: Used Location: Baldwin, United States Chuck is smooth clean might need to grind jaws when setting up to your spindle. Has Bison back plate ready to go
Buy It Now
$12.45 Shipping Condition: Used Location: Fort Calhoun, United States
Buy It Now
Free Shipping Condition: New Location: Seattle, United States 2 levers plus 4 holes in body, 3 in the scroll gives you 1-handed tightening! chucks have been designed by a machinist with engineering input from material, ... moreheat treating, and plating specialists in order to satisfy the woodturner's every need.
Buy It Now
$18.60 Shipping Condition: Used Location: Lacey, United States Description This Jacobs No. 58B headstock chuck is in good working condition. Fits 1 1/2" 8TPI threaded spindles. Which is the thread size found ... moreon the headstock spindle of many Atlas, Craftsman, Logan and South Bend lathes(among others) There is no chuck key included. Purchaser pays shipping and handling as shown on the shipping calculator(click on shipping tab) to your zip code or country. Payment and Shipping PAYMENT TERMS Acceptable domestic payment is currently via Pay Pal only. however one may inquire about"other" forms of payment prior to bidding. International payments must be made by Pay Pal. No exceptions! Payment in full is due within 7 days of the date of your purchase. Late payments may be accepted or rejected solely at the discretion of the seller. Michigan residents(or anyone picking up an item here in Michigan) must add 6% sales tax. Or provide a copy of your sales tax license for exemption. If shipping to an address different than the address you have on file with eBay. Please provide it right away for proper shipping fees. I reserve the right to cancel any bid. GUARANTEE- Satisfaction is GUARANTEED on all my items unless it is plainly stated as sold AS IS in the description. If not satisfied. You must contact me within 3 days of receipt of the item for a full refund of original purchase price and shipping fees paid. All shipping costs for returning goods as well as any Customs fee(s) paid, if any, are the sole responsibility of the buyer. No swap-a-roos are tolerated, all my items have a photo record and/or an invisible mark. SHIPPING TERMS Buyer agrees to pay the shipping and handling fee as shown on the shipping calculator(barring any major calculator errors) to your confirmed shipping address. I make a genuine effort to package your item safely for transport while at the same time keeping shipping costs fair. More than one shipping option is often offered for domestic shipping. So ple
Buy It Now
Free Shipping Condition: New Location: Wasilla, United States THIS IS THE NEW AND IMPROVED CHUCK FROM MILWAUKEE THAT REPLACES THE 42-66-2706 & 42-66-2707 CHUCK. FITS THESE MODELS.
Buy It Now
$21.90 Shipping Condition: Used Location: Baldwin, United States Original South Bend Lathe Heavy 10 L 13 Step Chuck Collet Closer 2 1/4 X 8 tpi Outside Dia. 3" This will be shipped USPS insured within 24 hours ... moreof receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but please wait for me to invoice you before you pay since ebay charges 10% on shipping fees and I will be on the phone for hours with them getting them to combine the shipping for me which they dont like to do since they lose money.
Buy It Now
Free Shipping Condition: Used Location: Tucson, United States We have not cleaned or refurbished this item in any way. Comes with everything you see in the pictures. Sold with the Tucson Tool Shop 30 Day guarantee! ... morePlease check our thousands of positive reviews. We are a brick and mortar store located in Tucson, AZ continuing the legacy of a business that has been around since 1978. We strive to keep all of our customers happy. If you have any questions about this or any item we have listed please do not hesitate to contact us! If you don't see what you need listed please ask for it and if available we can list it for you!
Buy It Now
Free Shipping Condition: New Location: Katy, United States 1" X 8TPI Direct Thread Wood Turning Chuck with 2"Jaw Set and Woodscrew and T-Bar Wrench 3-3/4" Wood Turning Chuck with 2"Jaw Set. Dedicated to fit 1" ... morex 8tpi lathe spindles. Accepts full range of NOVA & Record Power Chuck Accessories.
Buy It Now
$21.41 Shipping Condition: New Location: Saint Charles, United States Fits lathe spindle with 1-1/2 x 8 TPI threads. LATHE CHUCK CATEGORY Back Plates Threaded Mounting. We have more LATHE CHUCKS available SPINDLE NOSE TYPE ... moreThreaded. High cast iron grade. You may ask for freight cost before buying tools.
Buy It Now
Free Shipping Condition: Used Location: Portland, United States The threads on this are 1.5” x 8 tpi which fits a number of lathes. The threads are in good shape. Each jaw moves independently and the jaws are reversible. ... moreI didn’t do anything to clean this up so it’s really in nice used condition . The chuck key is included however the hex is a little chewed up I’m considering it a freebie that you can use until you find a better one.
Buy It Now
$15.50 Shipping Condition: New Location: Saint Charles, United States Mounting Thread Size: T=1-1/2-8 TPI. Fully machined back plate can be mounted onto 8" 4 jaw self Independent chuck (p/n 202-5421). The size of back plates's ... moreD1 should be a little bit smaller than the size of Chuck's D1.
Buy It Now
$19.00 Shipping Condition: Used Location: Medina, United States Logan 444 6" chuck.
Buy It Now
Free Shipping Condition: New Location: Lynnwood, United States 【Scope of Application】：Applicable to pen-making square material clamping, auxiliary drilling, end milling. 【Applicable Size】：The clamping range of the ... morelathe chuck is approx 8×8 to 23×23mm for square shaped material.
Buy It Now
Free Shipping Condition: New Location: Bawana S.O, India Made of Quality Tool Steel, this Adapter converts a 1-1/4" x 8 TPI lathe head-stock spindle to 1-1/2" x 8 TPI Allows a 1-1/4" x 8 TPI threaded spindle ... moreto accept 1-1/2" x 8 TPI threaded chucks, face-plates, and other wood-turning tools and accessories Flats allow for a solid wrench tool grip for tightening and loosening Expedited shipping to owrldwide. .
Buy It Now
$8.74 Shipping Condition: Used Location: Cape Neddick, United States Good condition, some super fine pitting on the face, it's dust like.
Buy It Now
$21.41 Shipping Condition: New Location: Saint Charles, United States Fits lathe spindle with 1-1/2 x 8 TPI threads. We have more LATHE CHUCKS available Thread Size: 1-1/2-8. High cast iron grade. You may ask for freight ... morecost before buying tools.
Buy It Now
$5.40 Shipping Condition: Used Location: Newberry Springs, United States Logan No. 444 6" 4 Jaw Lathe Chuck 1-1/2 x 8 TPI Made In USA. Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
Free Shipping Condition: Used Location: Portland, United States This is in good smooth running used condition. It has its original change jaws. Uses standard 1/4” ratchet to tighten jaws.
Buy It Now
$8.74 Shipping Condition: Used Location: Nashville, United States Original Cushman 3-jaw self-centering lathe chuck with a 5" diameter and a 1-1/2" x 8tpi threaded mount. Jaws are not reversible and the 5/16" square ... morekey is not included.
Buy It Now
$24.75 Shipping Condition: Used Location: Fullerton, United States Very nice vintage shapeOriginal Early Craftsman branding - Not 3rd party made for the Atlas Craftsman Lathes like many found Free of any major flaws or ... moreissuesMinor normal use wear Size and specs referenced in photosIncludes custom ground down Craftsman Allen for adjustment Any questions please feel free to askThanksIgnore
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. VEVOR Benchtop Wood Lathe Power Wood Lathe 14" x 20" Small Lathe Variable Speed. VEVOR Wood Lathe Power Lathes 14"x40" Wood Lathe Machine ... more375W Variable Speed. VEVOR Wood Lathe 14" x 40" Wood Turning Benchtop Lathe 4 Adjustable Speed 400W.
Buy It Now
$20.30 Shipping Condition: Used Location: New Hyde Park, United States This chuck was disassembled and thoroughly cleaned. It is in excellent condition. Made in England.
Buy It Now
$18.40 Shipping Condition: Used Location: Tewksbury, United States For sale is a lightly used SOUL #SO-6X 3-Jaw Geared Scroll Lathe Chuck 6-1/2", made in Japan, with an original 1-1/2"-8 TPI backplate. Reversable jaws ... morehave no play in them. Includes key.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States G8786 4-Jaw Chuck For Round Pieces - 1-1/2" x 8 TPI.
Buy It Now
$14.65 Shipping Condition: Used Location: Nashville, United States Nice original SBL 3-jaw self-centering lathe chuck with a 4-7/8" actual diameter and a 1-1/2" x 8tpi threaded mount. Jaws are not reversible and the 5/16" ... moresquare key is not included.
Buy It Now
$14.50 Shipping Condition: New Location: Saint Charles, United States For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck ... moreto make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
Buy It Now
Free Shipping Condition: New Location: Brentwood, United States This 10600 Wood Turning Chuck is a four jaw, self-centering, geared chuck and ideal to fit 1" x 8tpi lathe spindles. The anti-release lock is reversible ... moreand increases stability. One-handed geared action capability gives you a powerful and positive grip, and thus piece of mind while you use your lathe.
Buy It Now
Free Shipping Condition: New Location: New Egypt, United States 1"x8TPI Thread & 3/4"x16TPI Adapter. 4-Jaw Self-Centering Chuck for Wood Lathe. Upgrade your wood lathe experience with our 4-Jaw Self-Centering Chuck. ... moreWith a wide range of workpiece sizes supported, precision machined construction, and high-grade steel durability, this chuck is perfect for all your wood lathe projects.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States projects of all shapes and sizes with the 2.75-Inch 4-Jaw Self-Centering Keyed Chuck. This versatile chuck features dovetailed jaws, allowing you to grip ... morethe outside of stock between 1-1/8 to 1-3/4 inches in size, or to hold internal pilot holes ranging from 1-1/2 to 2-1/8 inches in diameter. If that’s not enough, you can also install the included screw chuck depending on the task at hand. Indexed backplate indicates 24 different positions while the included tools make for easy adjustments to the chuck. .
Buy It Now
Free Shipping Condition: New Location: Brentwood, United States One of the easiest to use, best value chucks on the market.You only need one hand to use this lathe chuck as the "T" handle jaw tightening key enables ... moreyou to to tighten the jaws with only one hand while your other hand is free to support your work.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Feature： projects of all shapes and sizes with the 2.75-Inch 4-Jaw Self-Centering Keyed Chuck. This versatile chuck features dovetailed jaws, allowing ... moreyou to grip the outside of stock between 1-1/8 to 1-3/4 inches in size, or to hold internal pilot holes ranging from 1-1/2 to 2-1/8 inches in diameter. If that’s not enough, you can also install the included screw chuck depending on the task at hand. Indexed backplate indicates 24 different positions while the included tools make for easy adjustments to the chuck. Description：.
Buy It Now
Free Shipping Condition: New Location: Seattle, United States This 10600 Wood Turning Chuck is a four jaw, self-centering, geared chuck and ideal to fit 1" x 8tpi lathe spindles. The anti-release lock is reversible ... moreand increases stability. One-handed geared action capability gives you a powerful and positive grip, and thus piece of mind while you use your lathe.
Buy It Now
Free Shipping Condition: New Location: United States WIDELY USED: Drilling lathe chuck is suitable for ordinary lathe, grinding machine, milling machine, drilling machine and machine tool accessories, woodworking ... moremachinery accessories and other machine tools and accessories.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States G8784 4-Jaw Chuck For Round Pieces - 1" x 8 TPI.
Buy It Now
Free Shipping Condition: New Location: Seattle, United States 2 levers plus 4 holes in body, 3 in the scroll gives you 1-handed tightening! Nagu chucks have been designed by a machinist with engineering input from ... morematerial, heat treating, and plating specialists in order to satisfy the woodturner's every need.
Buy It Now
$17.00 Shipping Condition: Used Location: San Jose, United States Cushman Chuck Co. 5" 3 Jaws Chuck Ref No. 5" 340 in used condition.
Buy It Now
Free Shipping Condition: New Location: China Round Jaw - Spindle mount thread M18 x 2.5mm.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Key Features: Drill a perfectly centered hole in your pen blank or bottle stopper blank directly on your lathe. Thread chuck onto your lathe's headstock ... morespindle; Mount a drill bit in a drill chuck in your lathe's tailstock; Advance drill bit into blank while lathe is spinning. Chuck is pre-threaded to 1" × 8tpi; Includes (2) tightening levers to open and close the chuck jaws. Reversible jaws on chuck will secure blanks up to 2. 5" square × 5" long. Use the standard jaw position to drill from 1/4" to 1. 5". Reverse the jaws to drill from 1. 5" to 2. 5". Weighs: 2. 35 lbs Diameter: 3. 25" Number Of Jaws: 2 Lathe Chuck Type: Manual Lathe Chuck.
Buy It Now
$39.35 Shipping Condition: Seller refurbished Location: New Hyde Park, United States This chuck was completely disassembled and cleaned thoroughly. There is some wear in the scroll.
Buy It Now
Free Shipping Condition: New Location: Denver, United States Wood Turning Chuck for Lathe - 1" x 8tpi Compatibility. Upgrade your lathe experience with the 10600 Wood Turning Chuck, designed to fit 1" x 8tpi lathe ... morespindles. Enjoy the benefits of a four-jaw, self-centering chuck that accommodates the full range of NOVA & Record Power Chuck Accessories.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description： -Projects Of All Shapes And Sizes With The 2.75-Inch 4-Jaw Self-Centering Keyed Chuck..
Buy It Now
Free Shipping Condition: New Location: Chino, United States projects of all shapes and sizes with the 2.75-Inch 4-Jaw Self-Centering Keyed Chuck. This versatile chuck features dovetailed jaws, allowing you to grip ... morethe outside of stock between 1-1/8 to 1-3/4 inches in size, or to hold internal pilot holes ranging from 1-1/2 to 2-1/8 inches in diameter. If that’s not enough, you can also install the included screw chuck depending on the task at hand. Indexed backplate indicates 24 different positions while the included tools make for easy adjustments to the chuck. .
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification： projects of all shapes and sizes with the 2.75-Inch 4-Jaw Self-Centering Keyed Chuck. This versatile chuck features dovetailed jaws, allowing ... moreyou to grip the outside of stock between 1-1/8 to 1-3/4 inches in size, or to hold internal pilot holes ranging from 1-1/2 to 2-1/8 inches in diameter. If that’s not enough, you can also install the included screw chuck depending on the task at hand. Indexed backplate indicates 24 different positions while the included tools make for easy adjustments to the chuck. Feature：.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Specifaication: Material: Steel Chuck Diameter: 2.75inch (95mm) Clamping Range: 1-1/5"(30mm) to 2"(52mm) Support Range: 1-2/5"(37mm) to 2-2/5"(60mm) Thread: ... more1'' x 8 TPI Package Included: 1Pc 4-Jaw Self-Centering Lathe Chuck Note: Due to lighting, the colour of the actual product may differ slightly from the picture of the product.
Buy It Now
Free Shipping Condition: New Location: Denver, United States VINWOX SCR4-4 Wood Lathe Chuck, 4-Jaw Self-Centering Chuck, with 1"x8TPI thread & 3/4"x16TPI Adapter, 3 Years. Both sides of jaw teeth and guides are ... moreground, all guideways and bearing surfaces are precisely machined for stable service and long life.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： projects of all shapes and sizes with the 2.75-Inch 4-Jaw Self-Centering Keyed Chuck. This versatile chuck features dovetailed jaws, allowing ... moreyou to grip the outside of stock between 1-1/8 to 1-3/4 inches in size, or to hold internal pilot holes ranging from 1-1/2 to 2-1/8 inches in diameter. If that’s not enough, you can also install the included screw chuck depending on the task at hand. Indexed backplate indicates 24 different positions while the included tools make for easy adjustments to the chuck. Description：.
Buy It Now
Free Shipping Condition: New Location: Lathrop, United States Mini Lathe Drill Chuck,1 X 8Tpi Wood Lathe Chuck,Mini Lathe 3 Jaw Chuck,M14 Lathe Chuck,Mini Lathe Tools Z011 Zinc Alloy 3?. Made of high quality material, ... morewear-resistant, strong and durable. 3-jaw design, compact size, easy to use.
Buy It Now
Free Shipping Condition: New Location: Chino, United States projects of all shapes and sizes with the 2.75-Inch 4-Jaw Self-Centering Keyed Chuck. This versatile chuck features dovetailed jaws, allowing you to grip ... morethe outside of stock between 1-1/8 to 1-3/4 inches in size, or to hold internal pilot holes ranging from 1-1/2 to 2-1/8 inches in diameter. If that’s not enough, you can also install the included screw chuck depending on the task at hand. Indexed backplate indicates 24 different positions while the included tools make for easy adjustments to the chuck. .
Buy It Now
Free Shipping Condition: New Location: Chino, United States projects of all shapes and sizes with the 2.75-Inch 4-Jaw Self-Centering Keyed Chuck. This versatile chuck features dovetailed jaws, allowing you to grip ... morethe outside of stock between 1-1/8 to 1-3/4 inches in size, or to hold internal pilot holes ranging from 1-1/2 to 2-1/8 inches in diameter. If that’s not enough, you can also install the included screw chuck depending on the task at hand. Indexed backplate indicates 24 different positions while the included tools make for easy adjustments to the chuck. .
Buy It Now
Free Shipping Condition: New Location: Katy, United States 4 Wood Lathe Chuck, 4-Jaw Self-Centering Chuck, with 1"x8TPI thread & 3/4"x16TPI Adapter, 3 s. ✅Scroll chuck perfect for holding bowls, spindles, and ... moreother unwieldy wood lathe projects. Widely used for machine tools and accessories for general lathes and industrial machines.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： projects of all shapes and sizes with the 2.75-Inch 4-Jaw Self-Centering Keyed Chuck. This versatile chuck features dovetailed jaws, allowing ... moreyou to grip the outside of stock between 1-1/8 to 1-3/4 inches in size, or to hold internal pilot holes ranging from 1-1/2 to 2-1/8 inches in diameter. If that’s not enough, you can also install the included screw chuck depending on the task at hand. Indexed backplate indicates 24 different positions while the included tools make for easy adjustments to the chuck. Description：.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States projects of all shapes and sizes with the 2.75-Inch 4-Jaw Self-Centering Keyed Chuck. This versatile chuck features dovetailed jaws, allowing you to grip ... morethe outside of stock between 1-1/8 to 1-3/4 inches in size, or to hold internal pilot holes ranging from 1-1/2 to 2-1/8 inches in diameter. If that’s not enough, you can also install the included screw chuck depending on the task at hand. Indexed backplate indicates 24 different positions while the included tools make for easy adjustments to the chuck. .
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature： projects of all shapes and sizes with the 2.75-Inch 4-Jaw Self-Centering Keyed Chuck. This versatile chuck features dovetailed jaws, allowing ... moreyou to grip the outside of stock between 1-1/8 to 1-3/4 inches in size, or to hold internal pilot holes ranging from 1-1/2 to 2-1/8 inches in diameter. If that’s not enough, you can also install the included screw chuck depending on the task at hand. Indexed backplate indicates 24 different positions while the included tools make for easy adjustments to the chuck. Description：.
Buy It Now
Free Shipping Condition: New Location: Miami, United States 1" X 8TPI Direct Thread Wood Turning Chuck with 2"Jaw Set and Woodscrew and T-Bar Wrench 3-3/4" Wood Turning Chuck with 2"Jaw Set. Dedicated to fit 1" ... morex 8tpi lathe spindles. Accepts full range of NOVA & Record Power Chuck Accessories.
Buy It Now
Free Shipping Condition: New – Open box Location: United States The wood lathe chuck body is made of casting material through CNC precision machining, This is high-precision self centering 4 jaw lathe chucks woodturning.
Buy It Now
Free Shipping Condition: Used Location: Grapevine, United States Oneway #2137 4 jaw stronghold chuck. Chuck #2137 with #2 jaws. 2103 premium profiled jaws. 1" x 8 tpi insert #327. 4mm T-handle hex key.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Specifaication: Material: Steel Chuck Diameter: 2.75inch (95mm) Clamping Range: 1-1/5"(30mm) to 2"(52mm) Support Range: 1-2/5"(37mm) to 2-2/5"(60mm) Thread: ... more1'' x 8 TPI Package Included: 1Pc 4-Jaw Self-Centering Lathe Chuck Note: Due to lighting, the colour of the actual product may differ slightly from the picture of the product.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States projects of all shapes and sizes with the 2.75-Inch 4-Jaw Self-Centering Keyed Chuck. This versatile chuck features dovetailed jaws, allowing you to grip ... morethe outside of stock between 1-1/8 to 1-3/4 inches in size, or to hold internal pilot holes ranging from 1-1/2 to 2-1/8 inches in diameter. If that’s not enough, you can also install the included screw chuck depending on the task at hand. Indexed backplate indicates 24 different positions while the included tools make for easy adjustments to the chuck. .
|
|
|
|
LATHE FACE PLATE 1 1/2" 8 TPI ATLAS SOUTHBEND
Up for sale is a Lathe face plate. Item is in good usable condition. 1 1/2" 8 tpi. 5" od Big Daddys vintage tools is a small individually ran company located in Baldwinville Massachusetts. I mostly sell vintage machine parts but you will also find various other items. I am a part time seller and sell from a store rather than auctions. I find it easier to manage store selling than bulk auctions. Starting in June 2012 I will be dropped from some searches. So please if you like what I sell save me in your favorites. I can not offer one day shipping or 14 day free return shipping. I sell vintage machine parts and various other items purchased at auctions.Estate sales and yard sales. I do my best to tell the truth and honor my mistakes. There have been no items were I refused a full refund including return shipping when I have made a ... moremistake. I find most all buyers just want what they bought. But for what I sell I am going to continue with my policy of 5 days. That is please contact me if there is a problem within 5 days. I give some slack because if you get a item on a Monday you might not get a chance to really check it out until Saturday if your working. Please then contact me so we can resolve the issue. Shipping please read: Shipping is a necessary evil nobody likes to pay it. However it is necessary and for what I sell. I must charge shipping! I try to keep the cost down and do not charge a packaging fee. Some time back the host started charging a finale value fee on shipping. This means they collect a percentage of the shipping cost besides the standard item cost. On a smaller USPS Priority mail item the cost is really not effected, any difference I absorb as the seller. However on larger items shipped UPS Ground or trucking, I must add weight or adjust to reflect the percentage the host takes. For ex sample if I'm sending a 100 pound item from Massachusetts to Oregon via UPS Ground I would be paying 10 dollars towards shipping. Heavier trucked items the amount can be much higher. So in most all c
|
|
|
14" Threaded Face Plate 2-1/8" Thread - 6 TPI
14" Threaded Face Plate 2-1/8" Thread- 6 TPI Face Plate Ref.12C-023 Diameter: 14" Width: 1-3/4" Center Hole Diameter: 1-7/8" Number of Radial Slots: 12 Size of Slots: 8) 1/2" 4) 11/16" Spindle Mount: 2-1/8 Thread- 6 TPI Approximate Shipping Weight: 50 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the ... morecheck to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
|
|
|
South Bend lathe 13-1/4" D. faceplate 2-3/8" - 6 TPI Fits 16" swing lathe
Used in good condition South Bend lathe 13-1/4 inch diameter slotted faceplate. Fits South Bend 16 inch swing lathes with 2-3/8 inch 6 TPI threaded spindle. Casting is marked LFP-101FH 40FHI. Buyer to pay shipping on 36 pounds. Due to excessive and abusive negative feedback from Canadians. I no longer sell to Canada. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
14" Threaded Face Plate 2-1/4" Thread - 8 TPI
14" Threaded Face Plate 2-1/4" Thread- 8 TPI Face Plate Ref.12C-052 Diameter: 14" Width: 1-3/4" Center Hole Diameter: 2-1/8" Number of Radial T-Slots: 4 Size of T-Slots: 1/2" Number of Radial Slots: 4 Size of Slots: 1/2" Spindle Mount: 2-1/4 Thread- 8 TPI Approximate Shipping Weight: 30 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. ... moreIf paid by check. We wait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
|
|
|
12 1/2" Threaded Face Plate 2-1/8" Thread - 6 TPI
12 1/2" Threaded Face Plate 2-1/8" Thread- 6 TPI South Bend Face Plate Ref.12C-026 Serial No. 49776 Diameter: 12-1/2" Width: 1-1/2" Center Hole Diameter: 2" Number of Radial Slots: 8 Size of Slots: 5/8" Spindle Mount: 2-1/8 Thread- 6 TPI Approximate Shipping Weight: 35 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We ... morewait for the check to clear. We can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
|
|
|
13-1/2" Threaded Face Plate 2-1/8" Thread - 6 TPI
13-1/2" Threaded Face Plate 2-1/8" Thread- 6 TPI Face Plate Ref.12C-009 Diameter: 13-1/2" Width: 2" Center Hole Diameter: 2" Number of Radial Slots: 12 Size of Slots: 3/4" Spindle Mount: 2-1/8 Thread- 6 TPI Approximate Shipping Weight: 45 lbs. All Items Subject to Prior Sale Be Sure to Verify Specs& Condition Prior to Purchasing CONTACT US: We are available to answer your calls and inquires. Monday thru Friday, 8am- 5pm, at 860.828.3541. PAYMENT: At this time we accept Paypal. Please contact Robin at 860-828-3541 with any questions. If you purchase multiple items from us. Or purchase a freight item, please wait to receive an updated invoice from us before making payment. Thank you. SHIPPING: The Buyer pays shipping. We ship after receipt of full payment. If paid by check. We wait for the check to clear. ... moreWe can provide special preparation, such as skidding or crating at an additional charge. Small items are shipped via UPS, FedEx or USPS, Monday thru Friday and will ship within 24 hours of cleared funds. Larger items will be shipped via flatbed truck or common carrier and buyer is responsible for arranging. No charge is incurred for loading at our warehouse. Most items being transported via common carrier will need skidding or crating. REFUND: We will refund any item returned within 30 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. Powered by
|
|
|
Logan Atlas Craftsman Metal Lathe Face Plate Dog Drive 6" 1 1/2" Diameter 8 tpi
Metal Lathe Face Plate Dog Drive 6" Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Logan Atlas Craftsman and Southbend? Metal Lathe 6" Face Plate Dog Drive 1 1/2" Diameter 8 tpi. Should you have questions. We can be reached at 563-387-7705. PayPal Etc UPS Ground Fully Insured in the USA. Shipping rates apply to the lower 48 states. We are more than happy to ship world-wide. Please check for shipping costs. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. Analyzing"Smart Counters" only at inkFrog inkFrog Analytics.
|
|
|
NEW ORIG ATLAS CRAFTSMAN 12 LATHE 5 " FACE DOG PLATE1 1/2" x 8 TPI
THIS AUCTION IS FOR A CRAFTSMAN ATLAS LATHE FACE PLATE 5 INCH ROUND 12-365 1 1/2 8 TPI
|
|
|
Lathe Face Plate 8 1/8 Dia. For 2-1/4 -8 TPI Spindles
Up for bid is a Lathe Face Plate 8 1/8 Dia. for 2 1/4 x 8 TPI Spindles. Any questions please feel free. Thanks.
|
|
|
5 1/4" FACE DOG PLATE SOUTH BEND 9 10K ATLAS 10 CRAFTSMAN 12 LATHE 1 1/2" 8 TPI
5 1/4" diameter face plate. Thread mounting diameter is 1 1/2" x 8 TPI. Threads are in good order. Outside thickness 5/8" All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NICE ORIGINAL LOGAN 8" FACE DOG PLATE TOOL 4 LATHE 1 1/2" 8 TPI PART K2
Nice- Original Logan 8" diameter face plate. Thread mounting diameter is 1 1/2" x 8 TPI. Threads are in fine order. Outside thickness 13/16" Stamped K2. Nice heavy driver plate, in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
VERY NICE ORIG ATLAS CRAFTSMAN 10 12 LATHE 6" FACE DOG PLATE 9-15 1 1/2" x 8 TPI
Very Nice- O riginal Atlas Craftsman 6" diameter dog face plate for an Atlas Craftsman 10" or 12" lathe. Thread mounting dimensions are 1 1/2" x 8 TPI. Outside thickness 1/2" Stamped with Atlas part number 9-15. In very fine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ORIG LFP-100N SOUTH BEND 9 10K LATHE 7 3/8" FACE DOG DRIVER PLATE 1 1/2" X 8 TPI
Nice- Original South Bend 7 3/8" diameter face plate. Thread mounting diameter is 1 1/2" x 8 TPI. Threads are in fine order. Outside thickness 7/8" Stamped"LFP-100N" All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
South Bend, Logan, and Atlas 7 1/4" Face Plate. 1-1/2" X 8 TPI
Here is a Used South Bend. Logan and Atlas 7-1/4" Faceplate. It has a 1-1/2" X 8 Threaded Mounting Hole. It is in Very Nice Condition. This was Picked up at an Retired Machinist Estate Sale. Please look ask all the Pictures and ask your Questions before Bidding. LIST OF TERMS AND CONDITIONS: All items I offer are old. Antique, collectible, used and sometimes abused and not new unless specified in the description. So please keep this in mind and have fair expectations. ALL ITEMS ARE SOLD AS IS AS FOUND" I do my best to describe all items well. I do my best to take good pictures.That said.If you're not sure about something please asks Questions(BEFORE) bidding. I will be more than happy to answer any questions to the best of my ability or send you more pictures of an item. I always leave cleaning and(repairs) if needed to ... morethe new owners. Payment 3 Days From End Of The Listing. Shipping Charges are for the Lower 48 States. Alaska& Hawaii Shipping are Quoted before Invoicing. INTERNATIONAL BIDDERS All International Shipments will be Shipped by US Postal Service"Priority Express Mail" Only. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
|
|
|
Vintage 6" Lathe 5" Dog Drive Face Plate Only 1-1/2" X 8 TPI
Here is a Used 6" Metal Lathe 5" Dog Drive Face Plate. It has a 1-1/2" X 8 Threaded Mounting Hole. It is in Very Nice Condition. This was Picked up at an Retired Machinist Estate Sale. Please look ask all the Pictures and ask your Questions before Bidding. LIST OF TERMS AND CONDITIONS: All items I offer are old. Antique, collectible, used and sometimes abused and not new unless specified in the description. So please keep this in mind and have fair expectations. ALL ITEMS ARE SOLD AS IS AS FOUND" I do my best to describe all items well. I do my best to take good pictures.That said.If you're not sure about something please asks Questions(BEFORE) bidding. I will be more than happy to answer any questions to the best of my ability or send you more pictures of an item. I always leave cleaning and(repairs) if needed to ... morethe new owners. Payment 3 Days From End Of The Listing. Shipping Charges are for the Lower 48 States. Alaska& Hawaii Shipping are Quoted before Invoicing. INTERNATIONAL BIDDERS All International Shipments will be Shipped by US Postal Service"Priority Express Mail" Only. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
|
|
|
8" Craftsman 25238.103 Faceplate 1-1/2 x 8 TPI Atlas South Bend / Logan Lathe
CRAFTSMAN 8" FACE PLATE IN GOOD USED CONDITION. HAS 1-1/2- 8 THREADS. WILL FIT OTHER LATHES WITH THAT THREAD. COMES AS SHOWN WITH SHOP MADE BOX.
|
|
|
Delta Face Plate 2 1/4'' Tall by 3 '' Dia. 1 1/8" x 8 TPI.
Delta Face Plate 2 1/4' Tall by 3' Dia. 1 1/8" x 8 TPI.
|
|
|
6" DOG DRIVER LATHE FACEPLATE, 1-1/2"-8 TPI, FACE PLATE
6" DOG DRIVER LATHE FACEPLATE. 1-1/2"8 TPI, FACE PLATE Please let the pictures help with the description and condition and view my other auctions for MORE LATHE TOOLING. Insurance is included in the shipping price. Check my feedback, satisfaction guaranteed and will combine ship when possible.
|
|
|
8" Dia Heavy Duty Lathe Face Plate with T-Slots Maybe 1-1/2" 1.5 8 TPI?
This is a heavy duty. 8" diameter, 1-1/2" thick face plate I bought with some other lathe tooling. Only problem is it doesn't fit my Logan lathe. My lathe has 1-1/2" 8 TPI spindle and this face plate will thread on ~1 full turn, but then it stops. In two of the photos you can see how far it threads on. In another photo you can see the face plate bore is 1.494" measured with my Harbor Freight caliper of unknown precision) The center of the face plate appears to have a plug, but I have not tried to remove it. Everything else including the T-slots are in good condition. Again, this face plate does not fit my 10" Logan. Maybe someone with more machine shop experience can figure out what to do with this.
|
|
|
8 1/2" fACE PLATE 1/1/2 " TPI REMOVED FROM ATLAS CRAFTSMAN 12" LATHE
You are bidding on a 8 1/2" fACE PLATE 1/1/2" TPI REMOVED FROM ATLAS CRAFTSMAN 12" LATHE SEE PHOTO’S Best Describes the Item up for Auction. Buyer pays S&H.US Buyers If you have any questions or concerns please email me before bidding at. Winning bidder to pay within 3days of close of auction. Good luck bidding. Auction. I will combine shipping on auctions to save on shipping costs. Note to all buyers I am not a expert on this item please ask questions I answers all questions email to me right up to 4 hour before auction ends. Also I expect email contact from buyer within three days Once you receive your item. Please remember to leave feedback. If you have any questions or problems, please email me so we can resolve the issue. Negative feedback does not solve the problem, communication does. I am committed to give the best ... morecustomer service possible Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
10" FACEPLATE FACE PLATE MOUNT 1-3/8" X 8 TPI w/ 2" HOLE THRU
10" FACEPLATE FACE PLATE MOUNT 1-3/8" X 8 TPI w/ 2" HOLE THRU USED. EXCELLENT CONDITION.
|
|
|
VERY NICE 6" DIAMETER CHUCK BACK PLATE FOR LATHE 1 1/2" x 8 TPI
Very Nice- 6" diameter chuck back plate. Thread mounting diameter is 1 1/2" x 8 TPI. Threads are in fine order. Outside thickness 5/8" with 5/8" hub. Stamped T950. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SOUTH BEND 5-5/8" FACE PLATE/DOG DRIVE, FOR SB9 OR 10K ATLAS LOGAN, 1-1/2" TPI-8
USED SOUTH BEND 5-5/8" FACE PLATE/DOG DRIVE. FOR SB9 OR 10K ATLAS LOGAN, 1-1/2" TPI-8. FITS 9 INCH SOUTHBEND LATHE. DOG FITS 3/4" DIAMETER, 301-3/4" MADE IN USA. UNIT HAS SOME SCRATCHES AND NICKS. SOME PAINT DISCOLORATION. NO RESERVE AUCTION. CA RESIDENT SALES TAX APPLIES. THANKS FOR LOOKING!
|
|
|
EXCELLENT ORIG ATLAS CRAFTSMAN 10 12 LATHE 6" FACE DOG PLATE 9-15 1 1/2" x 8 TPI
Excellent Condition- O riginal Atlas Craftsman 6" diameter dog face plate for an Atlas Craftsman 10" or 12" lathe. Thread mounting dimensions are 1 1/2" x 8 TPI. Outside thickness 1/2" Stamped with Atlas part number 9-15. Still retaining its original paint. In excellent condition. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SOUTH BEND 5" FACE PLATE / DOG DRIVE FOR SB 9 OR 10K ATLAS LOGAN, 1 1/2 x TPI-8
USED SOUTH BEND- 5" FACE PLATE/ DOG DRIVE FOR SB 9 OR 10K ATLAS LOGAN. 1-1/2" TPI-8. FITS 9 INCH SOUTHBEND LATHE. DOG FITS 1/2" DIAMETER, 201-1/2" MADE IN USA. UNIT HAS SOME SCRATCHES AND NICKS. SOME PAINT DISCOLORATION. NO RESERVE AUCTION. CA RESIDENT SALES TAX APPLIES. THANKS FOR LOOKING. NO ZERO OR NEGATIVE FEEDBACK BIDDERS WITHOUT CONTACTING ME FIRST!
|
|
|
7 1/2" Face plate - 1.375" X 8 TPI
I recently bought a lathe and this face plate was in with all the stuff. It does not fit my lathe. It has a couple little bites in the face. But it is otherwise good shape! Thanks for looking!
|
|
|
7 1/2" Diameter Face Plate for a Metal Lathe 8 TPI Unknown Make & Model
Welcome to my site! Where items ship quickly and carefully! Comes exactly as shown. With what is shown. Item Description: Please read and please see photos. I try to describe items as accurately as po ssible through photos and written explanation. Face plate shows some wear. There is a nick on the side and a nick in the threading. There are some surface scratches on the surface of the plate. It has some grease on it. COMBINED SHIPPING IS AVAILABLE WHENEVER POSSIBLE! My goal is NOT to make money on shipping. But rather, to offer buyers the cheapest. Saf est. And quickest shipping possible. If you have any questions or I can be of any help. Please ask and I will respond quickly! N.M. buyers will be charged 7.53% sales tax. Item can be returned within 14 days of purchase. Purchase Price will be promptly refunded after I receive the item in the ... moresame condition it was sent in. Item will be packaged with care and will ship quickly. I always ship out items within 1 business days after payment is received. I take my shipping and packaging seriously! Please see ratings. I am proud of my feedback and want buyers to buy with confidence. If you have any questions. Please feel free to ask, but please do so prior to purchase. I have worked hard for and always strive for 100% positive feedback and I strive for 5 star customer service in all categories. If you have any questions or concerns before. During, or after purchase please don't hesitate in contacting me. PayPal payments only please! Item must be paid for within 7 days of purchase or intentions must be communicated. Thank you for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14b30fd7613-0x114-
|
|
|
VINTAGE 6-1/2" FACE PLATE 1-1/2" x 8 TPI ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE
This item is a vintage 6-1/2" Face Plate for Atlas. Craftsman, South Bend, or Logan Lathe with 1-1/2" X 8 TPI mounting. Its thickness is 1/2" The face plate is in in excellent condition.
|
|
|
VINTAGE 5" FACE PLATE 1-1/2" x 8 TPI ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE
This item is a vintage 5" Face Plate for Atlas. Craftsman, South Bend, or Logan Lathe with 1-1/2" X 8 TPI mounting. Its thickness is 5/8" The face plate is in in excellent condition.
|
|
|
MACHINIST TOOLS LATHE MILL 7 1/4" 1 1/2" - 8 TPI Face Plate for South Bend
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.
|
|
|
Atlas 9-15 Face Plate 1 1/2" x 8 TPI Threads - 6" dia. / JY 200
Hello Folks. Today we have an Atlas Face Plate part# 9-15. 1 1/2" x 8 TPI threads- 6" diameter. Is in good, used condition, and has No damages. Please see all pics. Please check out our Ebay store for other great buy s. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
Face Plate - 6" dia. 1 1/2" x 8 TPI Threads / JY 199
Hello Folks. This is a 6" diameter face plate with 2- 5/16" x 18 TPI threaded holes. Fits on a 1 1/2" x 8 TPI spindle. It is in good, used condition, with No damages. Please see all pics. Please check out our Ebay store for other great buy s. I will gladly combine shipping on multiple items to save you on shipping cost. Please don't hesitate to email us with any questions regarding our items. We appreciate your prompt payment within 7 days of purchase unless you have emailed us prior to purchase to make other arrangements such as MO. If payment has not been made within 7 days. And you have not made contact with us regarding it then we do report all unpaid items to Ebay for collection in order to collect all fees charged to us by Ebay.
|
|
|
7 1/4" FACE / DRIVE PLATE 1-1/2" x 8 TPI ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE
I HAE HERE IS A 7 1/4" 1 1/2" 8 TIP FACE/ DRIVE PLATE GOOD CONDITION. FITS CRAFTSMAN 10" 12" ATLAS 10" 12" LOGAN 9" 10" JET 9" CLAUSING 100& 200 12" LATHES.
|
|
|
6" FACE / DRIVE PLATE 1-1/2" x 8 TPI ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE
I HAE HERE IS A 6" 1 1/2" 8 TIP FACE/ DRIVE PLATE GOOD CONDITION. FITS CRAFTSMAN 10" 12" ATLAS 10" 12" LOGAN 9" 10" JET 9" CLAUSING 100& 200 12" LATHES.
|
|
|
5 1/8" DIAMETER DRIVER DRIVE DOG FACE PLATE MACHINIST LATHE TOOL 1 1/2" x 8 TPI
5 1/8" diameter face plate. Thread mounting diameter is 1 1/2" x 8 TPI. Plate outside thickness 5/8" All as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Original Atlas Craftsman 6" Face Plate 1 1/2" X 8 tpi and Dog South Bend 9-15
Original Atlas Craftsman 6" Face Plate 1 1/2" X 8 tpi and Dog in excellent working condition This will be shipped USPS insured within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but please wait for me to invoice you before you pay since ebay charges 10% on shipping fees and I will be on the phone for hours with them getting them to combine the shipping for me which they dont like to do since they lose money.
|
|
 |